Guru Nanak English School

PHYSICS PROJECT

Topic : Study of various factors on which the

internal resistance/EMF of a cell
depends.

Submitted to : Mr. Jitendra Srivastava

Submitted by : Pranay Kumar Raj [Class 12th]
 Certificate
This is to certify that Master Pranay Kumar
Raj, a student of class 12th(science) has
successfully completed his project work
under the guidance of subject teacher Mr.
Jitendra Srivastava during the year 2023/24
from Guru Nanak English School in partial
fulfillment of physics practical examination
conducted by CBSE.

____________ ____________
Teacher In-charge External Examiner

__________
Principal School Rubber Stamp
Acknowledgement
The success and final outcome of this project
required a lot of guidance and assistance from
many people and I am extremely fortunate to have
got this all along the completion of my project
work. Whatever I have done is only due to such
guidance and assistance and I would not forget to
thank them.
I respect and thank Jitendra Srivastava Sir, for
giving me an opportunity to do this project work
and providing us all support and guidance which
made me complete the project on time. I would
like to express my gratitude towards Kaushik
Acharya Sir for helping me in conducting
practicals for project.

Last but not the least I would like to thank all

my friends who supported me all the way and
my parents who helped me financially and
encouraged me throughout in the
completion of project.
 INDEX

S.no Topic
1) Introduction
 Internal Resistance
2) Practical Analysis
 Objective
 Apparatus
 Theory
 Circuit Diagram
 Procedure
 Result & Inferences
 Precautions
 Sources of error
3) Bibliography
 INTRODUCTION

There is a great need of batteries in our daily

use electronic appliances and the use is
increasing every day. Thus , the batteries
need to be made more powerful so that their
potential can be increased greatly .
Thus , this project report is based on
practical analysis for the factors affecting the
internal resistance of a cell.
When the internal resistance of the cell is
decreased we can increase the potential
difference across it, and hence make it more
reliable.
INTERNAL RESISTANCE

Internal resistance is defined as the resistance offered

by the electrolyte of the cell to the flow of ions.
 Its SA. unit is Ohm (Ω)

For a cell of e.m.f. (E) and internal resistance (r),

connected to an external resistance (R) such that (I) is
the current flowing through the circuit,

Internal Resistance, r=E-V÷I

 PRACTICAL ANALYSIS

OBJECTIVE
To study the various factors on which the internal
resistance of a cell depends.

APPARATUS
A potentiometer, a battery (or battery eliminator),
two one way keys, a rheostat, a galvanometer, a
resistance box, an ammeter, a cell (Leclanche
cell), a jockey, a setsquare, connecting wires and
sand paper.

THEORY
The internal resistance of a cell is the resistance
offered by its electrolyte to the flow of ions . The
internal resistance of a cell
 is directly proportional to the distance
between the electrodes.
  is inversely proportional to facing surface
area of the electrodes in electrolyte.
 decreases with increase in temperature of
electrolyte.
 is inversely proportional to concentration of
electrolyte.

The internal resistance of a cell is given by:

r=(E-V)/I

CIRCUIT DIAGRAM
PROCEDURE
1.Clean the ends of the connecting wires with
sand paper and make tight connections according
to the circuit diagram.
2. Tighten the plugs of the resistance box.
3. Check the e.m.f. of the battery and of the cell
and make sure that e.m.f. of the battery is more
than that of the cell, otherwise null or balance
point will not be obtained.
To study variation of internal resistance with
distance of separation
4. Keep both the electrodes at a distance of 16 cm.
5. Take maximum current from the battery,
making rheostat resistance small.
6. Without inserting a plug in key K2, adjust the
rheostat so that a null point is obtained on the last
wire of the potentiometer.
7. Determine the position of the null point
accurately using a set square and measure the
balancing length (1;) between the null point and
the end P.
8. Next introduce plugs in both keys K; and Ko. At
the same time, take out a small resistance (1 — 5
W) from the shunt resistance box connected in
parallel with the cell.
9. Slide the jockey along a potentiometer wire and
obtain the null point.
10. Measure the balancing length (lz) from end P.
Record these observations.
11. Now keep the electrodes 12 cm apart.
12. Then remove the plugs of kevs K; and K>. Wait
for some time and repeat steps 7 to 10.
13. Next, keep the electrodes 9 cm apart to obtain
another set of observations.
To study variation of internal resistance with area
of electrodes
14. Keeping all other factors constant, increase
the area of electrodes in the electrolyte by dipping
them into the electrolyte at different depths for
each observation.
15. Obtain three such observations by repeating
steps 7 to 10. Record your readings.
To study variation of internal resistance with
concentration of electrolyte
16. Keeping all other factors constant, decrease
the concentration of electrolyte by adding distilled
water for different observations.
17. Obtain three such observations by repeating
step 7 to 10. Record your readings.

OBSERVATIONS
S.No Ammeter Position of null point(cm) Shunt Internal
Reading Resistance Resistance
(A) With R Without R R(Ω) R(Ω)
(l1) (l2)
1. 0.3 660.5 35.5 1 0.94
2. 0.3 660.5 77.2 2 1.77
3. 0.3 660.5 108.3 3 2.51

Table for effect of separation between electrodes

S.No Separation Balancing Balancing Internal r/d
Between Point Point Resistance
Electrodes l1(cm) l2(cm) r(Ω)
d(cm)
1 1.2 326.6 276.9 0.456 0.38
2 2.5 320.7 219.1 0.95 0.38
3 3.7 660.5 350.9 1.406 0.38
Table for effect of temperature
S.no Temperature l1(cm) l2(cm) Resistance Internal Tr
T(°C) R(Ω) Resistance (ΩK)
r(Ω)

1 1.2 326.3 276.9 0.456 0.38 301.44

2 2.5 320.7 219.1 0.95 0.38 291.96
3 3.7 660.5 350.9 1.406 0.38 283.87

RESULT & INFERENCES

 The Electromotive Force of the cell is
constant and is equalto E =0.98 Volt.
 The internal resistance of a cell is directly
proportional to the separation between the
electrodes.
 The internal resistance of a cell is inversely
proportional to the area of the electrodes
dipped in electrolyte.
 The internal resistance of a cell is inversely
proportional to the temperature of
electrolytes.
 The internal resistance of a cell is inversely
proportional to the concentration of the
electrolyte.
PRECAUTIONS
1. The connections should be neat , clean and tight.
2. The plugs should be introduced in the keys only
when the observations are to be taken.
3. The positive polls of the battery E and cells E;
and E> should , all be connected to the terminal at
the zero of the wires.
4. The jockey key should not be rubbed along the
wire. It should touch the wire gently.
5. The ammeter reading should remain constant
for a particular set of observation. If necessary ,
adjust the rheostat for this purpose.

SOURCES OF ERROR
1. The auxiliary battery may not be fully charged.
2. The potentiometer wire may not be of uniform
cross section and material density throughout its
length.
3. End resistances may not be zero.
 BIBLIOGRAPHY

 www.google.com
 www.documents.mx
 www.wikipedia.org
 www.docfoc.com
 www.slideshare.net