1.

Blade server
Blade Chasis Specification
Blade Chassis
Form Factor 6U-10U rack mountable Chasis to House at least 6 or more Blade Servers
Chasis Should be configured with 6 blades
Network Dual end to end redundant Network connectivity for each blade
Power Each blade should have dual redundant connectivity for Power from the
Redundancy Power supplies through the midplane
I/O Dual Redundant I/O Connectivity to each blade server
Connectivity
Blade Should accommodate Intel, AMD/RISC/EPIC CPU Blades in the same
Compatibility Chassis
KVM At least one IP Based KVM Switch or more in the chassis
Support
The Chassis should have At least one DVD ROM drive or better which
Optical Drive can be used by all the blade servers
Support
The optical drive should be hot swappable
L2 Switch 2 redundant 1GB Ethernet switch to be provided in the chassis with Layer
Support 2 features
Hotswap and redundant Power supplies should be provided with full
Power redundancy and all power modules
Supply should be fully populated
Cooling Hot Swap and redundant cooling modules and all modules should be fully
Modules populated
Alert Pre failure alerts and error identification on Hard Disks, processor,
Management memory, power Supplies, fans/blowers,
switch modules, KVM management module should be provided
System System management and deployment tools to aid configuring the Blade
management Servers and OS Deployment
Supporting Software for Vulnerability assessment
Software
The Blade servers should have dual connectors on it to be connected to the
midplane so as to provide dual path for I/O,N/W and power to each server
Efficiency for redundancy
Added advantage will be given to the most power efficient and quiter
product

Blade Server Specification

Specification for Blades - 6 numbers
No Item Specifications
1 CPU 1 x Intel Xeon Quad Core E5-2603 80W 1.8GHz
2 Cache L3 10 MB of L3 Cache
3 Chipset Intel Chipset
4 Memory 8GB Registered DDR-3 ECC Memory Upgradeable to 96 GB
5 Active Memory Advanced Chipkill ECC memory protection support, memory
protection mirroring and memory sparing
6 SCSI Controllers Integrated Hardware Raid Controller to supports Hardware
Raid 0,1
7 Disk Drives 2 x 300GB 2.5in SFF Slim-HS 10K 6Gbps SAS HDD
8 Graphics Controller 16MB SDRAM

9 Ethernet Adapter Server should be configured with four number of 1Gbps

ethernet ports
10 Fiber Channel/SAS Dual port SAS HBA for connecting to Internal/External
HBA Connectivity Storage
11 I/O Expansions 2 x8 PCIe
12 Power Supply From the Blade Chassis via Dual Redundant Power Connectors
13 Warranty 3 Years Onsite Comprehensive Warranty
14 Form Factor Full Height Blade Servers
The server should be able to alert impending failures on
15 Failure Alerting maximum number of components. The components covered
Mechanism under alerting mechanism should at least include Processor,
memory, HDDs and expansion cards
16 Blade Form Factor Full Height Blade Server with Dual Redundant I/O and Power
Connectors
Server should support systems management capabilities like
Web-based out-of-band control
SSL and LDAP Support
Serial Over LAN
IPMI over LAN
Systems Windows “blue screen” capture
17 management Should support remote CD and Virtual floppy
capabilities Automatic Service Restart
High-speed remote redirection of PCI video, keyboard and
mouse
NMI/SMI detection and generation
Highly secure remote power on/off
System reset control
Server should be supplied with OEM Server Management
software free of cost with features like
Should be able to discover systems and other resources in a
heterogeneous environment and Collect inventory data about
hardware and software that is currently installed on systems
Should be able to view and manage the status, problems and
events for discovered systems
18 Server Management
Software Should be able to determine the health, compliance, and
performance of managed systems by viewing detailed
information about the problems by inspecting the event log
Capable of automatically send the notifications for hardware
events or when thresholds are exceeded
Capable of doing configuration management of other systems
by Initially configuring one or more systems (hardware and
operating systems). Automatically configure newly discovered
systems
 Should have feature like update manager for detecting and
viewing out-of-date systems and also get a notification when
systems are in need of updates and which updates are needed.
Download, distribute and install available and requisite updates
Should be able to do the graphical remote control tools
including VNC, RDP, and web-based remote control for
AMM, ILO, IMM, and RSA
Able to discover and Work with virtualized environments
including Microsoft Virtual Server, VMware, and Xen.
Capable of viewing topology that shows the connections
between physical and virtual resources
Create automation plans based on events from virtual and
physical resources and automation actions such as relocating a
virtual server based on critical hardware alerts
Create, delete and manage virtual servers and virtual farms for
several virtualization technologies
Relocate virtual servers to alternate physical hosts
Ability to discover network devices and review network device
inventory . Able to Monitor the health and status of network
devices. View network device configuration settings, and apply
templates to configure devices
Management software should have upward integration with HP
OpenView , Microsoft System Center Operations Manager ,
CA Unicenter , Tivoli Enterprise
19 OS Support Server should support latest version of Microsoft windows,
Redhat, Novell and Vmware

Server High End Specification

Server should be quoted with Dual Hexa Core Processor Intel Xeon E5-2620
Processor 1333 Mhz
L3 Cache 15 MB
No of
processors Should be configured with 2 processors
Chipset Intel Chipset/ OEM Chipset / Or Equivalent
Server should be configured with 32 GB memory ( 4 * 8GB ) PC3-12800
Memory 1600MHz LP Registered ECC DIMMs
DIMM
Slots Server should support 24 DIMM Slots
Memory DDR3 Registered Memory with ECC, Chipkill, Spare Memory, and Memory
Property Mirroring features
Hard Disk 3* 300GB 10K SAS 6Gbps 2.5in Slim-HS HDD. Server should support up to
Drives 16 2.5" SAS/SATA hard disk
Integrated 6Gbps SAS hardware RAID 0, 1 and 10. Raid controller should
RAID support on line Raid level migration, on line capacity expansion and data
Controller scrubbing as well.
Optical
Drive DVD-RW
Graphics
Controller 16MB DDR2-SDRAM
Gigabit
Ethernet Four integrated Gigabit Ethernet ports with full duplex / TCP/IP Offload
Ports Engine (TOE).
PCI Slots 4 PCIe slots
Redundant
Power
Supply Server to be configured with Redundant Power Supplies
Redundant
Cooling
Fans Hot-swap and redundant cooling Fans to be configured in the system
Form
Factor 2U or more

Form Factor 2U or more

Server should support 6 Number of external USB 2.0 ports as well as 2

number of Internal USB ports for installation of Hypervisor key, also should
Ports support 2 Number of Video ports and Ethernet Management port
The server should be able to alert impending failures on server component
Failure (processors, VRMs, memory, HDDs, fans, and power supplies) to
Alerting administrator in order to avoid any downtime on the server due to actual
Mechanism failure

Server should send an alert notification on the system front panel for failure
Ease of detected on the system and also provide a mechanism to easily identify the
failure failed component during servicing which will help in reducing the downtime
identification on the server and maximizing the availability for business-critical applications

Should support integrated management functionality and should support

round-the-clock remote access and management of server, Remote
management independent of the status of the server, Remote control of
hardware and operating systems, also support IPMI 2.0 Interface, Thermal
Monitoring, Fan Control, IPMI Platform Event Trap Alerting, IPMI Serial
over LAN functionality, SNMPv1 and SNMPv3 Interfaces, SNMP TRAP, E-
mail, and CIM Indication Alerting, Failure Screen Capture for Operating
Mnaagement System hangs, Remote Media. Server should have dedicated remote
Functionality Management port on the rear of the chassis.
Warranty 3 Years Onsite Comprehensive Warranty

Server Mid end Specification

Form
factor/height 1U Rack
Intel Xeon 4C E5 2609 (Quad Core) 2.40Ghz 10 Mb 1066 Mhz also support
Processors for add on processor
Memory 8GB (1x8GB, 2Rx4, 1.5V) PC3-10600 CL9 ECC DDR3 1333MHz LP
(max) RDIMM should supports maximum Up to 768 GB
DIMM Slots 24 slots (UDIMM/RDIMM/LRDIMM)
Hard Disk 3x300GB 10K 6Gbps SAS 2.5" SFF G2HS HDD
Disk bays Eight 2.5" or three 3.5" hard disk drives (HDDs)
RAID Integrated 6 Gbps hardware RAID-0, -1, -10; optional RAID-5, -50 or -6, -
support 60
Power
supply Redundant 550 W ac, 750 W ac, or 750 W dc
Hot-swap
components Power supplies, fan modules and hard disk drives
Network
interface 4 × 1 Gb ethernet
Expansion
slots 2 PCIe 3.0 slots, optional 1 PCI-X
USB ports 2 (three for 3.5" model) front/4 back/1 internal
VGA ports 1 front/1 back
Maximum
internal
storage Up to 8 TB (2.5" model) or 9 TB (3.5" model) SAS/SATA
Energy-
efficiency Compliant with 80 PLUS® Platinum and ENERGY STAR® (model
compliance dependent)
IBM IMM2 with optional FoD remote presence, Predictive Failure
Systems Analysis, Diagnostic LEDs, light path diagnostics panel, Automatic Server
management Restart, IBM Systems Director and Active Energy Manager™
Operating
systems Microsoft Windows Server 2008 R2, Red Hat Enterprise Linux, SUSE
supported Linux Enterprise Server, VMware vSphere
Limited 3-year customer replaceable unit and onsite service, next business day 9×5,
warranty service upgrades available

Server Low End Specification

Form factor/height Rack/2U
Should be configured with One Intel Xeon E5620 (Quad Core)
Processor 2.40 Ghz 12Mb 1066 Mhz
Number of
processors(std/max) 1/2
Cache 12 MB L3
Configured with 8GB (1x8GB, 2Rx4, 1.5V) PC3-10600 CL9
ECC DDR3 1333MHz LP RDIMM and supports maximum Up
Memory to 192 GB in 12 slots, using RDIMMs
Hard disk 3x500GB 7200 RPM 3.0 GB/sec Hot-Swap SATA
Expansion slots Two x8 PCIe Gen II slots and one x4 PCIe Gen II buried slot
Maximum HDD support 8 hard disk bays
Disk bays (total/hot Up to four 3.5" simple-swap SATA HDDs or up to eight 3.5"
swap) hot-swap SAS/SATA HDDs
Maximum internal
storage Up to 16.0 TB hot-swap SAS or SATA
Network interface Integrated two ports Gigabit
Power supply 2nos ; 460 W or 675 W HE each
Hot-swap components Power supplies, HDDs
RAID support Configurable with Raid 5

IBM IMM with Virtual Media Key, PredictiveFailure Analysis,

Integrated Service Processor,light path diagnostics panel,
Automatic ServerRestart, IBM Systems Director and
Systems management ActiveEnergy Manager™, IBM ServerGuide
Operating systems Microsoft® Windows® Server, Red HatLinux®, SUSE Linux,
supported VMware

Warranty 3-Year customer replaceable unit and on-sitelimited warranty

Workstation Specification
Processor Intel Xeon E3-1220 3.10 GHz v2
RAM 4GB (1 X 4GB) Non-ECC configurable Up to 32 GB 1600
MHz DDR3
HDD/ 1TB SATA 3.5” SATA, configurable Up to 3 HDDs
ODD DVDRW
Graphics NVIDIA Quadro 2000 1Gb graphics with Dual Display Port,
Dual-link DVI and supporting maximum resolution of
2560x1600
Monitor 22” LED Monitor Multiple input options – DisplayPort, DVI-D
and V,Wide viewing angle with native resolution of 1680 x
1050; 16:10 Aspect ratio; 5ms response time ,ENERGY STAR
5.1 compliant, TCO certified Edge 1.1, and
Mercury/Arsenic free glass
Ports (4) USB 3.0 (Rear);(2) USB 2.0 (Front)
Ethernet Gigabit ethernet
OS Windows 7 Professional 64-bit
Warranty 3 Years on-site