“DC-UPS” uninterruptible power supply solutions

Make Your system better over its Life Time

DC-Ups
Integrated Electronic Solutions
Connect Multimediality
The new ADELSystem platform ADELVIEW SYSTEM ADELVIEW GRAPHIC
communication ADELBus allows the Comprehensive suite for remote The Device is a robust multifunction
connection of all the components in a monitoring and management of display. It allows to monitor,
simple but very powerful way. A single Adel System devices connected in configure and manage the Adel
communication protocol based on an ADELBus network. System’s devices connected in
MODbus-RTU or CANbus technology • ADELView System is a PC-based an ADELBus network. It has a
depending on the application field. It software developed to monitor high-brightness and wide viewing-
allows you to communicate with all the in real time every important angle 3.5’’ TFT-LCD screen which
devices provided by ADELSystem and parameter of the Device. A guarantees an optimum visibility
to develop an independent system for
simple and intuitive user’s in any operating condition. The
interface allows monitoring of user interface is clear, intuitive and
electrical continuity. Monitoring and
battery parameters, load output, allows configuring and managing
control of all parameters in the system,
temperature sensor, mains the connected devices in a quick
even from the other side of the world, by
presence and all alarm and and straightforward way. Moreover,
means of application tools and Cloud.
diagnostic flags. All features are by using the on-board Ethernet
ADELSystem allows you to implement
displayed on a single screen. interface it is possible to remotely
very simple but sophisticated
• ADELView app, application for manages the ADELBus network
monitoring and control for your energy
tablet, you can visualize in real through Internet with a PC or a
system and opens your mind to new time data stored on your own mobile device. At the same time, the
ways to approach your applications. device. Device can act as a gateway that
• ADELView Cloud, a suite available implements standard protocols such
Everything and more ! to all customers. Main function as Modbus TCP/IP and SNMP.
• More efficiency for the battery thanks as Data Logger for all parameters From the Display you can manages
to continuous control over time. coming from the connected all the connected devices allowing:
• More monitoring features in the main devices. • Monitoring
connection modes: input , output • ADELView Config: interface that • Configuration
load, battery. allows application engineers to • Alarms management
• Event logging: number of battery configure the system, customize • Events program, i.e. programmed
charging cycles, charge cycles battery charging curve, set alarm actions that are coordinated
thresholds, configure parameters, among the devices
completed, aborted charge cycles, Ah
Demo for customers.
charged, charging time, total number
Everything is available in free
of transitions stand-by /back-up etc...
download on the Web page. BATTERY BANK
• Event Management: checking the load
No matter how large or small
output, shutdown management of PCs
the capacity of the battery
(UPS function), RESET management
storage needed in the system,
of a generic equipment. ADELSYSTEM DC-UPS devices
• Flexibility of usage: customization allow simple and effective
of the entire battery charging curve, integration. ADELSYSTEM has been
battery type setting, setting boost a pioneer in the development of
voltage, absorption, float, etc... automatic charging and monitoring
configuration as Batteries Charger, the battery. Thanks to Adel Battery
Enabling power supply function. Care technology every battery will
be taken care of and will last longer.
Continuous system monitoring and
life test checking allows preventive
replacement and therefore
increased system reliability. For a
compact and optimized integration,
ADELSYSTEM supplies Batt VRLA
battery modules.
 ADEL VIEW ADEL VIEW
SYSTEM GRAPHIC
DPY353

ETHERNET

ETHERNET
24 V
· PLC
· Switch gear
· Sensors
· Actuators
· Security systems

Load

BATTERY 230 Vac

BANK
· TV color
BATTERY · Coffee
· Light
· Actuators

INVERTER

BATTERY
TEMPERATURE

110/240 VAC
POWER

TEMPERATURE DPY353 BATTERY

COMPENSATED CHARGING “DPY353” is a circular LED display You can recharge and Test all Battery
By installing the battery temperature device for panel mount. Simple and types: Open Lead Acid, Sealed Lead
probe “RJ Temp”, the charge sturdy, it displays the current charge Acid, AGM Sealed Lead Acid, Gel, Ni/
voltage is automatically adapted to mode, state of charge and system Cd, Li-Ion. Any Size is taken in Care.
battery temperatures. diagnostics at a glance.
When the battery temperature is low,
the charge voltage increases. INVERTER
Conversely, when battery LOAD Among the loads there are sometime
temperature is high, charge voltage is The DC-UPS unit mission is devices which requires AC power.
decreased. Over charge and gassing to always keep the load supplied. In this case an inverter must be
are thus prevented. The Load Output is the source of installed. ADELSYSTEM DC-UPSs
This will extend battery life (ADEL's power for the whole electric system allow connection of inverters up to
Philosophy of Battery Care). and has been designed to perform 1500W.
this duty under the most critical
conditions, no matter if during stand-
ADELBUS by or back-up modes.
ADELSystem network, interconnect
all Devices in Canbus and Modbus.

DC Ups Catalogue ADELSystem Srl 3

 Power continuity
DC-UPS: SMART BATTERY MANAGEMENT WIDE INPUT VOLTAGE RANGE
• POWER SUPPLY Load output will not be affected Flexibility is given also by the wide
• BATTERY CHARGER by battery conditions range input voltage. The range of the
• BACK UP MODULE The DC-UPS ensures continuous devices accept input voltage 110 -
Double Output, Optimized Power power supply to the load even in 230 - 277 - 400 - 500 Vac.
Management conditions of completely discharged
Thanks to the DC-UPS units, it batteries. The automatic multi-stage
will be possible to smart-manage operation optimizes and adapts to
the available power. It will be the battery status.
automatically allocated between load DC-UPS can recharge deeply
and battery. Supplying power to the discharged batteries even when their
load is the first priority of the unit; voltage is close to zero, thus allowing Input ity
thus it is not necessary to double the recharge and complete recovery of flexibil
power, and also the power available flat batteries.
for the battery will go to the load if
the load requires so.

Output Load:
12, 24, 48

Power Boost: Battery Load

In x 2 Continuos
TIME BUFFERING
In x 3 max 4 sec.
Time buffering is enabled when in
back-up mode. Buffering time setting
AVOID DEEP BATTERY
is possible by operating the rotary
Load DISCHARGE
switch on the front panel.
In case of mains failure, the battery will
supply the load until battery voltage
reaches 1.5 Vpc (Volt per cell). Below
this level the device automatically TIME BUFFERING
switches off to prevent deep discharge
and battery damage.

In Power Boost mode the

maximum current on the load
output is the 2 times the rated
current (2 x In) in continuous
ONE DEVICE FOR
operation and 3 times the rated OUTPUT 12 OR 24 VDC
current (3 x In) for max. 4 seconds. You can select the voltage
START FROM BATTERY WITHOUT
MAIN between 12 or 24 Vdc just before
If you want to restart the system while installing the device in your panel.
Output load
the mains is off, a battery restart (Available on Some products in the
In ADELSYSTEM range)
In function is available, via RTCONN
In I batt cable connections, or via pushbutton
2 In > 4 min.
in the front panel.
In I batt I batt
3 In max. 4 sec.

Start from battery

4 DC Ups Catalogue ADELSystem Srl

Connections & Monitoring
MONITOR SIGNALS DRIVER COMMAND AUXILIARY OUTPUT
Clear definition of each system Remote link for selection of “AUX 2 AND AUX 3”
operation, via LED indications and Float/Boost charging Auxiliary Input-Output gateway
Relay contact: Via RTCONN remote connections ADELBus. Interconnect all Devices in
cable it is possible to drive the Canbus and Modbus and Ethernet.
Contact Port signals. Galvanic devices from Float to Bulk. Standard protocols for Ethernet
insulated It is also possible to permanently put connection such as Modbus TCP/IP
• Main or back-up conditions a jumper for Boost - Bulk Charging. and SNMP.
• Battery or system fault
• Flat battery

ETHERNET

Boost flat charge

CAN
ACCESSORIES
Display Signals by LED All DC-UPS units can be made
• Input Main On Off available with the following options
• Battery Fault by Rj45 or Rj11 connector:
• Low battery (capacity less than
30%) Temperature sensor Probe, for
• Type of Battery charge mode ambient temperature compensation
• Help through “blinking code” charging.

Battery Start UP cable

DC Ups Catalogue ADELSystem Srl 5

Battery Care

All devices are completely ONE DEVICE FOR MULTI-STAGE CHARGING

automatic and can charge any ALL BATTERY TYPES FOUR CHARGING MODES
kind of battery using factory pre- All devices are suitable to charge Automatic multi-stage operation
set charging curve suitable to most batteries types thanks to user and real time diagnostic allow fast
selectable charging curves, they recharge and recovery of deeply
the most common accumulator
can charge open lead acid, sealed discharged batteries, adding value
technologies: open lead acid,
lead acid, Gel, Ni-Cd, Ni-MH, Li Ion and reliability to the system hosting
sealed lead acid, lead gel,
batteries. It is possible to change or the DC-UPS device. The type of
Ni-Cd, Li-Ion. These devices add other charging curves by con- charging is Voltages stabilized and
are very flexible and can be necting the device to a portable PC. Current stabilized IUoU.
customized to met the needs Charging mode is then completely CBI battery chargers feature four
of the user and the application automated. charging modes, identified by a
requirements. Afther the first flashing code in a LED.
applications, it is possible JUMPER POSITIONS
• Recovery able to recharge
to carry out functional SW batteries even when their voltage
updates just by using ADELView Open Lead Acid: is close to zero
System or ADELView Graphic.
Float 2.23V Boost 2.40V • Boost - Bulk
(factory preset)
• Absorption
Doing so, your system can
Sealed Lead Acid (1): • Float
always be updated to charging
Float 2.25 Boost 2.40V
requirement. The Battery Care
concept is based on algorithms
AGM Sealed Lead Acid (2): Boost
that assist to implement Float 2.27 Boost 2.40V
rapid and automatic charging
curve and detect battery and Gel:
system failure, during the time. Float 2.30V Boost 2.40V
Recovery Charge Float

Absorbtion
Ni/Cd

BULK
Battery faults such as battery Li-Ion
charge
(blink 5/sec.)

sulphated, element in short

circuit, accidental reverse
Boost or flat charge
battery connection, can be ADJUSTABLE MAXIMUM
Start from battery
easily detected, identified and BATTERY CHARGING CURRENT
Battery Life Test
removed. The DC UPS Series The maximum battery charging
meet the highest standards of Battery type confi- current can be set from 10% to
guration jumper
quality and insure high reliability, 100% of the device rated value.
with MTBF values up to 300.000
hours. L N PE

Boost or float charge.

TEMPERATURE COMPENSATION
In special application like fire fighting
equipment, you can recharge the
battery also with the temperature
compensation charging function, for
the best condition of your battery in
the temperature fluctuation.

Temperature Battery
sensor
 General Data

DIAGNOSIS FOR DIAGNOSTIC CHECKS MAXIMUM SAFETY TECHNOLOGY

BATTERY AND DEVICE “DURING FUNCTIONAL AND PROTECTION The DC-UPS range is
All CBI devices support the user TIME” The DC-UPS series is based on Four strategic
during installation and opera- Accidental disconnection ca- designed to provide safe know-how elements
tion. A LED flashing sequence bles DC-UPS detects acciden- operation and long power
Switching technology
tal disconnection and immedi- supply and battery life.
code allows to discriminate ADELSYSTEM has a
ately switches off output power. The following protections
among various possible faults. 25 year experience in
are standard features
Error conditions, LED Fault design of advanced sta-
Battery not connected • Outputs protected
ON and LED Diagnosis flash- bilized switching tech-
If the battery is not connected against short circuit
ing with sequence of: nology power supplies.
the battery output is disabled. and overload
• 1 flash = Reverse polarity, A power supply/battery
• Outputs in conformity
Wire testing connection charger unit based on
wrong battery voltage to SELV and PELV con-
impedance this technology is much
• 2 flashes= Disconnected ditions
During Float charge the resist- more efficient.
battery • High insulation between
ance on the battery connection primary and secondary Back UP Module and
• 3 flashes = Battery element in
is checked every 20 sec. This to • Protection against deep Battery Care
short circuit
detect if the cable connection battery discharge Unlike most other
• 4 flashes = Overload
has been properly made. • Protection against re- state-of-the-art battery
• 5 flashes = Battery to be
verse polarity connec- chargers, the DC-UPS
replaced(Internal impedance Battery in Open Circuit or
tion series is equipped with
Bad or Bad battery wire con- Sulphated
• Detection of batteries complex algorithms
nection) Every Two hours DC-UPS tests
with wrong rated volt- which controls the
of internal impedance, while in
age charging process and
Float charging mode. All protections have au- enable several moni-
Reverse Polarity tomatic reset. No thermal toring functions. The
If the battery is connected with fuse to be replaced. firmware implements the
inverted polarity, DC-UPS is extended Adel battery
automatically protected. ROBUST CONSTRUC- care know-how, result of
TION AND EASY many years of experi-
Battery voltage connections INSTALLATION ence in this field.
BATTERY LIFE TEST Appropriate voltage check, to All the units in the range
Power Management
It guarantees battery reliability in prevent connection of wrong have aluminium casing,
Power Sharing on Load
time by continuously testing the battery types. DIN rail fastening clip and
Output side. Inside the
internal impedance. It avoids any are light and compact.
End of Charge device, manage auto-
possible risk of damages and IP20 protection degree.
When the battery is completely matically power to and
grants also a permanent, reliable full, the device automatical- from the battery, power
NORMS
and safe connection of the ly switches to Float charging from internal power
In Conformity to: Safety EN
battery to the power supply. The mode. supply. Over Load and
IEC 62368-1:2014/AC:2015;
system, through a battery stim- Short circuit depend on
Emission: IEC 61000-6-3;
ulation circuit with algorithms Battery Cells in short circuit the state of the device,
Immunity: IEC 61000-6-
of evaluation of the detected Thanks to specific testing algo- the aim is to maintain the
2; EN60950/UL60950-1;
rithms, the DC-UPS recognize best power the Load, by
parameter, is able to recognize Electrical Safety EN54-4
batteries with cells in internal a complex algorithm.
sulphated batteries or batteries Fire Detection and Alarm
short circuit. Systems; EMC Directive;
with a short-circuited cell.
DIN41773 (Charging Cycle)
CE.

Element in
Short Circuit

DC Ups Catalogue ADELSystem Srl 7

DC-Ups 12-24 Vdc 12 Vdc

In Vac Battery

Mains or Backup
Battery Low or
Out load Battery Replacement

Input (Volt) 115 - 230 - 277 Vac

Frequency 47 - 63 Hz

MODEL CBI2801224A CBI123A CBI6012A CBI126A CBI1210A CBI1235A

12/24Vdc 12Vdc 12Vdc 12Vdc 12Vdc 12Vdc
OUTPUT 15/10A 3A 5A 6A 10A 35A
280W 36W 60W 72W 120W 420W
12Vdc 15A
Output Vdc / IN 12Vdc - 3A 12Vdc - 5A 12Vdc - 6A 12Vdc - 10A 12Vdc - 35A
OUTPUT 24Vdc 10A
DATA
Efficiency (50% of In) > 91% ≥ 90% > 90% ≥ 90% ≥ 90% > 91%
10 - 14.4Vdc
(15.5Vdc Ni-Cd)
Output voltage (at at In) Vdc 10 - 14.4Vdc (17Vdc Ni-Cd)
22 - 28.8Vdc
(31Vdc for Ni-Cd)
Continuous current 15A 12Vdc
3A 5A 6A 10A 35A
(without battery) Iload = In 10A 24Vdc
Max continuous current 30A 12Vdc
6A 10A 12A 20A 70A
LOAD (with battery) Iload = In + Ibatt 20A 24Vdc
OUTPUT
Max current Output Load: max. 45A 12Vdc
9A max 15A 18A max 30A max 105A max
(Main Input) Iload (4sec.) 30A 24Vdc
Max current Output Load: max. 30A 12Vdc
6A max 10A 12A max 20A max 70A max
(Back Up) Iload (4sec.) 20A 24Vdc
Start from Battery only, without main ✔ ✔ ✔ ✔ ✔ ✔
Time Buffering ✔ ✔2 ✔ ✔2 ✔2 ✔
14.4Vdc / 28.8Vdc
Fast Charge - Boost Charge 14.4Vdc (2.4V/Cell); Nicd 1.5V/cell
(2.4V/Cell)
Max. Time Boost/Fast charge (Typ. at IN) 15h 15h 15h 15h 15h 15h
Max. Time Bulk charge (Typ. at IN) 15h 15h 15h 15h 15h 15h
Float Charge: Depend
BATTERY
on Battery type (V cell) 2.23 V/cell Open Lead, 2.25 V/cell Sealed
OUTPUT

Recovery Charge 2-10V / 2-20V 2-9V 2-9V 2-9V 2-9V 2-9V

Charging Current Limiting IN (Iadj) 10 ÷100% / Ibatt 20 ÷100% / Ibatt 20 ÷100% / Ibatt 20 ÷100% / Ibatt 20 ÷100% / Ibatt 10 ÷100% / Ibatt
Remote Input Control
(AMP Type connector) Bulk / Float Bulk / Float Bulk / Float Bulk / Float Bulk / Float Bulk / Float

Charging Curve

SIGNAL Main or Backup Power ✔ ✔ ✔ ✔ ✔ ✔

OUTPUT
(RELAY) Low Battery / Device Fault ✔ ✔ ✔ ✔ ✔ ✔
UPS Enabling ✔ ✘ ✔ ✘ ✘ ✘
AUXILIARY
OUTPUT
Communication Protocol Modbus RTU ✘ Ethernet / Can ✘ ✘ Modbus RTU
Ambient Temperature operation

De rating Tª > (In)

CLIMATIC
DATA
Ambient Temperature Storage

Humidity at 25 °C

Cooling

Isolation Voltage (IN / OUT) 3000Vac 3000Vac 3000Vac 3000Vac 3000Vac 3000Vac
Isolation Voltage (IN / PE) 1605Vac 1605Vac 1605Vac 1605Vac 1605Vac 1605Vac
Isolation Voltage (OUT / PE) 500Vac 500Vac 500Vac 500Vac 500Vac 500Vac
GENERAL
DATA
Protection Class (EN/IEC 60529) IP 20 IP 20 IP 20 IP 20 IP 20 IP 20
Reliability (MTBF IEC 61709) > 300 000 h > 300 000 h > 300 000 h > 300 000 h > 300 000 h > 300 000 h
Dimension (w-h-d) 110x115x135 65x115x135 70x91x57 65x115x135 65x115x135 150x115x135
Safety Standard Approval CE CE 3
CE CE 3
CE 3
CE 3

ADEL View Graphic (Display 2.7”) ✔ ✘ ✔ ✘ ✘ ✔

ADEL View Graphic (Display 3.5”) ✔ ✘ ✔ ✘ ✘ ✔
OPTIONAL ADEL View System
(Sw for PC; Cloud) ✔ ✔ ✔ ✔ ✔ ✔

Battery temp. compensation Probe

RJTemp; 2 m length ✔ ✔ ✔ ✔ ✔ ✔

(1) Options to be defined by Order/S (ex: CBIXXXA/S), Push Button not available
(2) Yes if required by order /TB1/TB2/TB3..
(3) UL60950

8 DC Ups Catalogue ADELSystem Srl

 24 Vdc 48 Vdc

CBI6024A CBI243A CBI245A CBI2410A CBI2420A CBI485A CBI4810A

24Vdc 24Vdc 24Vdc 24Vdc 24Vdc 48Vdc 48Vdc
2.5A 3A 5A 10A 20A 5A 10A
60W 72W 120W 240W 500W 240W 500W

24Vdc - 2.5A 24Vdc - 3A 24Vdc - 5A 24Vdc - 10A 24Vdc - 20A 48Vdc - 5A 48Vdc - 10A

> 90% ≥ 90% ≥ 90% ≥ 83% > 91% ≥ 83% > 90%

22 - 28.8Vdc (31Vdc Ni-Cd) 44 - 57.6Vdc ( 62Vdc Ni-Cd)

2,5A 3A 5A 10A 20A 5A 10A

5A 6A 10A 20A 40A 10A 20A

7.5A max 9A max 15A max 30A max 60A max 15A max 30A max

5A max 6A max 10A max 20A max 40A max 10A max 20A max

1 1
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔2 ✔2 ✔2 ✔ ✔2 ✔

28.8Vdc (2.4V/Cell); Nicd 1.5V/cell 57.6Vdc (2.4V/Cell); Nicd 1.5V/cell

15h 15h 15h 15h 15h 15h 15h

15h 15h 15h 15h 15h 15h 15h

Lead, 2.27 V/cell Sealed Lead, 2.3 V/cell gel; NiCd 1.5V/cell (10 elem.) Float (Imax 10%)

2-24V 2-24V 2-24V 2-24V 2-24V 2-24V 2-24V

20 ÷100% / Ibatt 20 ÷100% / Ibatt 20 ÷100% / Ibatt 20 ÷100% / Ibatt 10 ÷100% / Ibatt 20 ÷100% / Ibatt 10 ÷100% / Ibatt

Bulk / Float Bulk / Float Bulk / Float Bulk / Float Bulk / Float Bulk / Float Bulk /

IUoU, Automatic, 4 stage

✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✘ ✘ ✘ ✘ ✘ ✘
Ethernet / Can ✘ ✘ ✘ Modbus RTU ✘ Modbus RTU
-25 ÷ +70°C
> 50° -2.5%(In) / °C
-40 ÷ +85°C
95% to 25°C
Auto Convection
3000Vac 3000Vac 3000Vac 3000Vac 3000Vac 3000Vac 3000Vac
1605Vac 1605Vac 1605Vac 1605Vac 1605Vac 1605Vac 1605Vac
500Vac 500Vac 500Vac 500Vac 500Vac 500Vac 500Vac
IP 20 IP 20 IP 20 IP 20 IP 20 IP 20 IP 20
> 300 000 h > 300 000 h > 300 000 h > 300 000 h > 300 000 h > 300 000 h > 300 000 h
70x91x57 65x115x135 65x115x135 100x115x135 150x115x135 100x115x135 150x115x135
CE CE 3
CE 3
CE 3
CE 3
CE 3
CE 3

✘ ✘ ✘ ✘ ✔ ✘ ✔
✔ ✘ ✘ ✘ ✔ ✘ ✔

✘ ✘ ✘ ✘ ✘ ✘ ✘

✔ ✔ ✔ ✔ ✔ ✔ ✔

Optional for auxiliary Output: Temp Charging probe 1m or 3m lenght. Remote monitoring
Display. Modbus/Can Bus Cable. Paralleling Cable.

DC Ups Catalogue ADELSystem Srl 9

 Battery modules

VRLA 12 Vdc 24 Vdc

They are traditional and Rugged Battery
Module for DC UPS range. They are com-
posed maintenance-free lead-acid VRLA
batteries whit serial fuse. Simple connection
with screws. Size: 1.2 Ah, 3 Ah, 7.2 Ah and
12 Ah. Battery Modules: 2 x 12 Vdc.

Model BATT 123 BATT 127 BATT 1.2 Ah BATT 3 Ah BATT 7.2 Ah BATT 12 Ah
Output 12V - 3.2Ah 12V - 7.2Ah 24V - 1.2Ah 24V - 3.2Ah 24V - 7.2Ah 24V - 12Ah

End-of-charge voltage (Float charge) 27.5 Vdc (20°C) ; 27 Vdc (30°C); 26.5 Vdc (40°C)
FEATURE

Max. permissible charging current 0.80 A 1.70 A 0.30 A 0.80 A 1.70 A 3A

Short-circuit protection ✔ ✔ ✔ ✔ ✔ ✔
Protection fuse 25 A 25 A 25 A 25 A 25 A 25 A
Ambient temperature (operation) +5 ÷ +40 °C +5 ÷ +40 °C +5 ÷ +40 °C +5 ÷ +40 °C +5 ÷ +40 °C +5 ÷ +40 °C
Ambient temperature (storage) -20 ÷ +50 °C -20 ÷ +50 °C -20 ÷ +50 °C -20 ÷ +50 °C -20 ÷ +50 °C -20 ÷ +50 °C
Self-discharge rate 20 °C 15% per month
Dimension (w-h-d) 105 x 175 x 90 105 x 175x120 170 x 100 x 80 170 x 140 x 90 170 x 155x120 235 x 155x120
GENERIC
DATA

Weight 0.7 Kg approx 1.1 Kg approx 1.55Kg approx 3 Kg approx 5.5 Kg approx 9 Kg
Protection class IP20 IP20 IP20 IP20 IP20 IP20
Assembly using 4 holes For hanging onto M4 screws

Small VRLA 24 Vdc

Compact and fully enclosed improve safety
and maintenance, transmit information on
the temperature and type of batteries. They
save space and improve the efficiency of the
DC UPS “All In One”.. Size for 24 Vdc: 1.2 Ah,
3 Ah, 7.2 Ah and 12 Ah.

Model BAT1.2 VRLA BAT3.4 VRLA BAT7.2 VRLA BAT12 VRLA

Output 24V - 1.2Ah 24V - 3.2Ah 24V - 7.2Ah 24V - 12Ah

End-of-charge voltage (Float charge) 27.5 Vdc (20°C) ; 27 Vdc (30°C); 26.5 Vdc (40°C)
INPUT
DATA

Max. permissible charging current 0.30 A 0.80 A 1.70 A 3A

Short-circuit protection ✔ ✔ ✔ ✔
OUTPUT
DATA

Protection fuse 25 A 25 A 25 A 25 A
Output current max. 25 A max. 25 A max. 25 A max. 25 A
Mounting position DIN Rail / Wall Mount DIN Rail / Wall Mount DIN Rail / Wall Mount Wall Mount
GENERIC
DATA

Assembly using 4 holes for hanging onto M4 screws

Ambient temperature (operation) 0 ÷ +40 °C 0 ÷ +40 °C 0 ÷ +40 °C 0 ÷ +40 °C
Ambient temperature (storage) -20 ÷ +50 °C -20 ÷ +50 °C -20 ÷ +50 °C -20 ÷ +50 °C
Self-discharge rate 20 °C 15% per month
Dimension (w-h-d) 62 x 175 x 120 82 x 200 x 160 145 x 210 x130 210 x 210x210
Weight 1.5 Kg approx 3 Kg approx 5.5 Kg approx 9 Kg
Protection class IP20 IP20 IP20 IP20

Battery type 1.2 Ah 3.2 Ah 7.2 Ah 12 Ah Battery type 1.2 Ah 3.2 Ah 7.2 Ah 12 Ah
Load 1.5 A 20 60 200 400 Load 10 A 7 20 45
BUFFERING
(MINUTE) TIME

BUFFERING
(MINUTE) TIME

✘
Load 3 A 8 30 120 240 Load 12 A ✘ 3 12 30
Load 5 A 3 15 55 100 Load 15 A ✘ ✘ 9 20
Load 7.5 A 2 10 30 60 Load 20 A ✘ ✘ 7 13

10 DC Ups Catalogue ADELSystem Srl

Adel View Graphic

24 V
· PLC
· Switch gear
· Sensors
· Actuators
· Security systems
ADEL VIEW
SYSTEM OUT LOAD

BATTERY
BANK
ETHERNET ADEL
BUS
DISPLAY
DC-UPS

110/240 VAC
TEMPERATURE
SENSOR POWER

The DPY351 is a robust and versatile WHAT DOES IT DO? Alarms and Recorder
multifunction display that allows From ADELBus network (Adel management
monitoring, configuring and managing System network) manages all the • Setting Alarm threshold
the Adel System devices connected in connected devices allowing: • Receive Message from other
an ADELBus network. It is equipped devices
with a high-brightness and wide Monitoring • Event Record
viewing-angle 3.5’’ TFT screen which • Event logging: number of battery
guarantees an optimum visibility in any charging cycles, charge cycles Events program, i.e.
operating condition. The user interface completed, aborted charge programmed actions
is clear, intuitive and allows configuring cycles, Ah charged, charging • Coordinated action among
and managing the connected devices time, total number of transitions devices
in a quick and straightforward way. stand-by /back-up etc. • Program Event to other device
Moreover, using the on-board Ethernet • Status of Charging Battery to change the type of charging
interface it is possible to remotely curve
manage the ADELBus network through Configuration • Checking the load output,
Internet with a PC or a mobile device. • Charging curve, shutdown management Reset.
At the same time, the DPY351 can act • Battery type,
as a gateway that implements standard • Limitation charging Current
protocols such as Modbus TCP/IP and • Enabling power supply function.
SNMP. • Timer…

DC Ups Catalogue ADELSystem Srl 11

PRODUCT RANGE

G R A PH I C D ES I G N: DAV I D E PLO I A
DC UPS “ALL IN ONE” FLEX D-FLEX CB
DC UPS “All In One”DC Power DIN rail Switching Power High efficiency Power Supply The Best generation of Battery
Back Up units. Multi-function Supplies. Very compact in size, in Mini Size Dimension, for all Charger with 4 level of charge,
devices: power supply, battery 150% power boost, wide input kind of small power request in a Auto Diagnosis system inside.
charger and back-up module in voltage range 110 - 230 - 400 flat control panel. For Domotic, One product for all battery types.
the same casing together with - 500 Vac. Selectable output Domestic and Industrial field.
Adel Battery Care software. protection mode.

POWER SUPPLY DC/DC CONVERTER INTERFACES BATTERY BANK

LOW INPUT VOLTAGE Dc / Dc Converter, step Up Wide range of passive interfaces Power Storage Devices, for
Switching power suppy for and Step down. Input - Output units for Input and Output connection to DC Ups Products.
direct connection to secondary isolated, low voltage. With or connections, for PLC and CNC Battery size: 1.2; 3; 7,2; 12 Ah,
transformer. In 24 Vac. Out 12 - 24 without DIN Rail. machine. 24 Vdc.
- 48 Vdc Watt: 25 - 460.

AUXILIARY MODULE SFP SAFETY POWER POWER VIEW GRAPHIC ADEL VIEW SYSTEM
Decoupling Modules for Power continuity solutions for Robust Display wide viewing- Suite for remote monitoring and
redundancy applications. alarm systems and fire alarms. angle 3.5’’ TFT. ADELBus management devices connected
Electronic Fuses for Over Load Available as a fully enclosed device network. Gateway for Ethernet in in an ADELBus network. Features:
output control, up to 4 cannel. conforming with EN54.4 or as a Modbus TCP and SNMP. PC software; iOS and Android;
component to be integrated in Cloud latform; Advanced features
other instrumentation. for installation and demonstration
purposes.

I N N O V AT I O N A N D M U LT I M E D I A L I T Y
ADELSYSTEM continues to implement comes with ADELBus inside. point of view in the search of innovation.
its offering of innovative and functional The Power Continuity products ADELSys- ADELBus, the ADELViewsystem and the
products as a company specializing in the tem are enhanced by Multimedia devices ADELViewgraphic are the connecting
electrical continuity for the DIN Rail field. like Display and Software APPlications for elements to DC Ups, Power Supply and
The wide range of available products is the new way towards Industry 4.0. Battery Charger for catching all of the
now involved in the Interconnection field These, are innovative solutions has been parameters inside the device.
through the ADELBus protocol imple- developed by the ADELSYSTEM R&D All of this, to involve you into a new
mented in the main devices of our prod- team for the expert electrical designer evolution of Actions both for today and
ucts range. Every new device developed and the user who need to change their next-future life.

Adel System srl

Via Luigi Barchi 9/B · 42124 Reggio Emilia · Italy
tel. +39 0522 345518 · [email protected]
www.adelsystem.com

© ADELSystem srl. The copying, distribution and utilization of this document as well as the communication of its contents
to others without expressed authorization is prohibited. All data in this publication are subject to change without information.