Scribd
Upload
408 views2 pages

Belt Tension Chart

Uploaded by

benjir shuvo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
408 views2 pages

Belt Tension Chart

Uploaded by

benjir shuvo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

7/30/2017 G3306 Gas Engine G6X00001-UP(SEBP3728 - 26) - Documentation

Previous Screen
Welcome: j065btl
Product: GAS ENGINE
Model: G3306 GAS ENGINE G6X03678
Configuration: G3306 Gas Engine G6X00001-UP

Testing and Adjusting


G3304 and G3306 Engines
Media Number -SENR7939-08 Publication Date -01.09.2011 Date Updated -01.02.2017

i01660532

Belt Tension Chart


SMCS - 1357

Note: Do not use the belt tension charts for belts with tensioners that are spring loaded.

Table 1
Belt Tension Chart

Gauge Reading Kent-Moore Gauge Numbers


Size of
Width of Belt Belt Tension Belt Tension Number of the Number of the
Belt
“Initial”(1) “Used”(2)(3) Old Gauge New Gauge

10.72 mm 534 ± 111 N 400 ± 22 N


3/8 BT-33-97 BT 3397
(0.422 inch) (120 ± 25 lb) (90 ± 5 lb)

13.89 mm 578 ± 111 N 445 ± 44 N


1/2 BT-33-97 BT 3397
(0.547 Inch) (130 ± 25 lb) (100 ± 10 lb)

15.88 mm 712 ± 111 N 445 ± 44 N


5V BT-33-72C BT 3372C
(0.626 Inch) (160 ± 25 lb) (100 ± 10 lb)

17.48 mm 712 ± 111 N 445 ± 44 N


11/16 BT-33-72C BT 3372C
(0.688 Inch) (160 ± 25 lb) (100 ± 10 lb)

19.05 mm 712 ± 111 N 445 ± 44 N


3/4 BT-33-72C BT 3372C
(0.750 Inch) (160 ± 25 lb) (100 ± 10 lb)

23.83 mm 712 ± 111 N 445 ± 44 N


15/16 BT-33-77 BT 3372C
(0.938 Inch) (160 ± 25 lb) (100 ± 10 lb)

27.82 mm 1068 ± 111 N 890 ± 44 N


8PK BT-33-109 BT 33109
(1.095 inch) (240 ± 25 lb) (200 ± 10 lb)
20.94 mm 801 ± 111 N 667 ± 44 N
6PK BT-33-109 BT 33109
(0.824 Inch) (180 ± 25 lb) (150 ± 10 lb)

Measure the tension of the belt that is farthest from the engine.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/s… 1/2
7/30/2017 G3306 Gas Engine G6X00001-UP(SEBP3728 - 26) - Documentation

(1) Belt tension “Initial” is for a new belt.


(2) Belt tension “Used” is for a belt that has operated for 30 minutes or more of operation at the rated speed.
(3) If a belt falls below the “Used” belt tension, the belt should be tightened again to the high side of the “Used” belt tension.

Table 2
DAYCO Supplied Belts Only

Belt Tension Belt Tension


Size of Belt
“Initial” “Used”(1)

0.380 (V-Belt) 623 ± 22 N (140 ± 5 lb) 245 - 534 N (100 ± 5 lb)

0.440 (V-Belt) 667 ± 22 N (150 ± 5 lb) 245 - 534 N (100 ± 5 lb)

0.500 (V-Belt) 712 ± 22 N (160 ± 5 lb) 245 - 534 N (100 ± 5 lb)

0.600 (V-Belt) 779 ± 22 N (175 ± 5 lb) 245 - 534 N (100 ± 5 lb)

0.660 (V-Belt) 890 ± 22 N (200 ± 5 lb) 245 - 534 N (100 ± 5 lb)

0.790 (V-Belt) 890 ± 22 N (200 ± 5 lb) 245 - 534 N (100 ± 5 lb)

4 - RIB PVK 623 ± 22 N (140 ± 5 lb) 267 - 445 N (90 ± 5 lb)

5 - RIB PVK 779 ± 22 N (175 ± 5 lb) 334 - 556 N (100 ± 5 lb)

6 - RIB PVK 934 ± 22 N (210 ± 5 lb) 400 - 667 N (130 ± 5 lb)

8 - RIB PVK 1157 ± 22 N (260 ± 5 lb) 534 - 890 N (180 ± 5 lb)

10 - RIB PVK 1557 ± 22 N (350 ± 5 lb) 667 - 1112 N (230 ± 5 lb)


12 - RIB PVK 1869 ± 22 N (420 ± 5 lb) 800 - 1335 N (270 ± 5 lb)

15 - RIB PVK 2336 ± 22 N (525 ± 5 lb) 1000 - 1669 N (350 ± 5 lb)


(1) If a belt falls below the “Used” belt tension, the belt should be tightened again to the “Initial” belt tension.

Copyright 1993 - 2017 Caterpillar Inc. Sun Jul 30 2017 12:19:24 GMT+0600 (Bangladesh Standard Time)
All Rights Reserved.
j065btl
Private Network For SIS Licensees.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/s… 2/2

You might also like