Scribd
Upload
157 views

Simulation in Solid Works Report

1) The document summarizes a static simulation of a shaft model in Solidworks. 2) The model was meshed with over 14,000 nodes and 8,600 elements, and subjected to a torque load of 18,750 N.m. 3) The results show a maximum von Mises stress of 5,009 N/m^2 and maximum resultant displacement of 7.578e-05 mm.

Uploaded by

Faisal Mehrban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
157 views

Simulation in Solid Works Report

1) The document summarizes a static simulation of a shaft model in Solidworks. 2) The model was meshed with over 14,000 nodes and 8,600 elements, and subjected to a torque load of 18,750 N.m. 3) The results show a maximum von Mises stress of 5,009 N/m^2 and maximum resultant displacement of 7.578e-05 mm.

Uploaded by

Faisal Mehrban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Simulation of shaft

Date: Tuesday, December 19, 2023


Designer: Solidworks
Study name: Static 2
Analysis type: Static

Table of Contents
Description ........................................... 1
Assumptions .......................................... 2
Model Information................................... 2
Study Properties ..................................... 3
Units ................................................... 3
Material Properties ................................. 4
Description Loads and Fixtures .................................. 4
No Data Connector Definitions .............................. 5
Interaction Information ............................ 5
Mesh information .................................... 5
Sensor Details ........................................ 5
Resultant Forces..................................... 6
Beams ................................................. 6
Study Results ......................................... 7
Conclusion ............................................ 8

Analyzed with SOLIDWORKS Simulation Simulation of shaft 1


Assumptions

Model Information

Model name: shaft


Current Configuration: Default
Solid Bodies
Document Name and Document Path/Date
Treated As Volumetric Properties
Reference Modified
Boss-Extrude2
Mass:517,638 kg
Volume:66.3639 m^3 C:\Users\HP\OneDrive\Des
Solid Body Density:7,800 kg/m^3 ktop\shaft.SLDPRT
Weight:5.07286e+06 N Dec 19 01:29:29 2023

Analyzed with SOLIDWORKS Simulation Simulation of shaft 2


Study Properties
Study name Static 2
Analysis type Static
Mesh type Solid Mesh
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from Off
SOLIDWORKS Flow Simulation
Solver type Automatic
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SOLIDWORKS document
(C:\Users\HP\OneDrive\Desktop)

Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2

Analyzed with SOLIDWORKS Simulation Simulation of shaft 3


Material Properties
Model Reference Properties Components
Name: Plain Carbon Steel SolidBody 1(Boss-
Model type: Linear Elastic Isotropic Extrude2)(shaft)
Default failure Max von Mises Stress
criterion:
Yield strength: 2.20594e+08 N/m^2
Tensile strength: 3.99826e+08 N/m^2
Elastic modulus: 2.1e+11 N/m^2
Poisson's ratio: 0.28
Mass density: 7,800 kg/m^3
Shear modulus: 7.9e+10 N/m^2
Thermal expansion 1.3e-05 /Kelvin
coefficient:
Curve Data:N/A

Loads and Fixtures


Fixture name Fixture Image Fixture Details
Entities: 5 face(s)
Type: Fixed Geometry
Fixed-1

Resultant Forces
Components X Y Z Resultant
Reaction force(N) 8.16584e-06 -0.213584 4.21405e-05 0.213584
Reaction Moment(N.m) 0 0 0 0

Load name Load Image Load Details


Entities: 1 face(s)
Reference: Axis1
Type: Apply torque
Torque-1 Value: 18,750 N.m

Analyzed with SOLIDWORKS Simulation Simulation of shaft 4


Connector Definitions
No Data

Interaction Information
No Data

Mesh information
Mesh type Solid Mesh
Mesher Used: Blended curvature-based mesh
Jacobian points for High quality mesh 16 Points
Maximum element size 0.404809 m
Minimum element size 0.404809 m
Mesh Quality High

Mesh information - Details


Total Nodes 14206
Total Elements 8635
Maximum Aspect Ratio 3.0797
% of elements with Aspect Ratio < 3 100
Percentage of elements with Aspect Ratio > 10 0
Percentage of distorted elements 0
Time to complete mesh(hh;mm;ss): 00:00:02
Computer name:

Sensor Details
No Data

Analyzed with SOLIDWORKS Simulation Simulation of shaft 5


Resultant Forces
Reaction forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N 8.16584e-06 -0.213584 4.21405e-05 0.213584

Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 0

Free body forces


Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N 3.09646e-05 0.000321865 -0.00022018 0.000391197

Free body moments


Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 1e-33

Beams
No Data

Analyzed with SOLIDWORKS Simulation Simulation of shaft 6


Study Results

Name Type Min Max


Stress1 VON: von Mises Stress 0.000e+00N/m^2 5.009e+03N/m^2
Node: 11 Node: 12165

shaft-Static 2-Stress-Stress1

Name Type Min Max


Displacement1 URES: Resultant Displacement 0.000e+00mm 7.578e-05mm
Node: 9 Node: 54

shaft-Static 2-Displacement-Displacement1

Analyzed with SOLIDWORKS Simulation Simulation of shaft 7


Name Type Min Max
Strain1 ESTRN: Equivalent Strain 0.000e+00 1.809e-08
Element: 5259 Element: 4813

shaft-Static 2-Strain-Strain1

Conclusion

Analyzed with SOLIDWORKS Simulation Simulation of shaft 8

You might also like