Centrifugal Pump

Multitec / Multitec-RO

High-pressure Ring-section Pump

Type Series Booklet

Legal information/Copyright
Type Series Booklet Multitec / Multitec-RO

All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
edited or processed for any other purpose, nor otherwise transmitted, published or made available to a
third party without the manufacturer's express written consent.
Subject to technical modification without prior notice.

© KSB SE & Co. KGaA, Frankenthal 11/04/2018

 Contents

Contents
Centrifugal Pumps ............................................................................................................................................ 4
Multistage High-pressure Centrifugal Pumps .......................................................................................................................... 4
Multitec/Multitec-RO ........................................................................................................................................................... 4
Main applications........................................................................................................................................................... 4
Fluids handled ................................................................................................................................................................ 4
Operating data............................................................................................................................................................... 4
Designation .................................................................................................................................................................... 4
Design details ................................................................................................................................................................. 5
Materials ......................................................................................................................................................................... 5
Technical description ..................................................................................................................................................... 6
Operating ranges by installation type .......................................................................................................................... 8
Product benefits ............................................................................................................................................................. 9
Acceptance tests and warranty ..................................................................................................................................... 9
Pressure and temperature limits ................................................................................................................................. 10
Materials ....................................................................................................................................................................... 12
Seal codes for the mechanical seal.............................................................................................................................. 16
Seal codes for the gland packing ................................................................................................................................ 17
Technical data .............................................................................................................................................................. 18
Noise characteristics ..................................................................................................................................................... 18
Selection Charts............................................................................................................................................................ 20
Drive.............................................................................................................................................................................. 23
Dimensions ................................................................................................................................................................... 24
Flange design (standard) ............................................................................................................................................. 31
Nozzle positions ........................................................................................................................................................... 32
General assembly drawing with list of components (example) ................................................................................ 33

3
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Centrifugal Pumps ▪ Condensate

▪ Fire-fighting water
Multistage High-pressure Centrifugal Pumps ▪ Solvents
▪ Lubricants
Multitec/Multitec-RO ▪ Fuels
▪ Cooling water
▪ Water/oil emulsions
▪ Seawater
▪ Thermal water

Operating data
Operating properties
Characteristic Value
Size DN 32 - 250
Flow rate Q [m3/h] ≤ 1500
Q [l/s] ≤ 417
Head H [m] ≤ 10001)
Fluid temperature T [°C] ≥ -10
≤ +2001)
2)
Operating pressure p2 [bar] ≤ 1001)

The product illustrated as an example may include options Designation

incurring a surcharge.
Example: Multitec3) A 32/8E-2.1 12.167 (SP)
Main applications Designation key
▪ Water supply systems
Code Description
▪ Drinking water supply Multitec Type series
▪ Pressure boosting A Installation type
▪ General irrigation systems 32 Nominal discharge nozzle diameter [mm]
8E No. of stages / impeller combination
▪ Fossil-fuelled power stations
2.1 Hydraulic system
▪ Hot-water supply 12 Material code
▪ Condensate transport 167 Seal code
▪ Boiler feed applications SP Code for special variants (optional)

▪ Heating systems
Example: Multitec-RO4) A 100/5-8.1 31.80
▪ Filtering systems
▪ Fire-fighting systems Key to the designation
▪ Snow-making systems Code Description
▪ Washing plants Multitec-RO Type series
A Installation type
▪ Industrial plants
100 Nominal discharge nozzle diameter [mm]
▪ Desalination plants 5 Number of stages
▪ Geothermal plants 8.1 Hydraulic system
▪ Heat recovery systems 31 Casing material (duplex stainless steel)
80 Seal code

Fluids handled
▪ Water
▪ Drinking water
▪ Feed water
▪ High-temperature hot water

1) Only for individual sizes/designs

2) The sum of inlet pressure and shut-off head must not exceed the value indicated.
3) Code: MTC
4) Code: MTC-RO

4 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Design details

Design
▪ Multistage centrifugal pump in ring-section design
▪ Horizontal installation in long-coupled or close-coupled
design
▪ Vertical installation in close-coupled design or with
universal joint shaft

Pump casing
▪ Suction casing: axial or radial
▪ Radial suction casing and discharge casing: nozzles can be
turned in steps of 90°
▪ Flanges to EN and ASME (holes and flange facing)
▪ Identical seal housing for gland packing and mechanical
seal
▪ Stage casings, discharge casings and seal housing sealed by
confined O-rings

Drive
▪ 50 Hz and 60 Hz electric motor
▪ Can be driven by diesel engine or turbine

Impeller type
▪ Closed radial impeller with multiply curved vanes

Bearings
▪ Fixed bearing, drive end: rolling element bearing
▪ Radial bearing, non-drive end: either plain bearing or
rolling element bearing, depending on the type of
installation
▪ Rolling element bearing grease or oil lubricated
▪ Plain bearing lubricated by fluid handled
▪ Self-aligning

Coupling
Long-coupled design:
▪ Flexible coupling with or without spacer
Close-coupled design:
▪ Up to DN 65 with rigid coupling

Coupling guard
Standard:
▪ Coupling guard, cylindrical
Optional:
▪ Coupling guard, tread-proof

Shaft seal
▪ Uncooled gland packing, with or without barrier fluid
▪ Standardised mechanical seal to EN 12756
▪ Cartridge mechanical seal

Materials
▪ Casing: grey cast iron, nodular cast iron, steel, stainless
steel, duplex stainless steel, super duplex stainless steel
▪ Hydraulic system: grey cast iron, bronze, stainless steel,
duplex stainless steel, super duplex stainless steel

Multitec/Multitec-RO 5
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Technical description
Installation types A, B, C and D

Installation type A5) B5) C5) D6)

▪ Horizontal design, ▪ Horizontal design, ▪ Horizontal design, ▪ Horizontal design,

long-coupled long-coupled long-coupled long-coupled
▪ Only one shaft ▪ Only one shaft ▪ With two shaft ▪ With two shaft
passage (drive end) passage (drive end) passages passages
▪ Rolling element ▪ Rolling element ▪ Rolling element ▪ Rolling element
bearing at the drive bearing at the drive bearings at the drive bearings at the drive
end / plain bearing end / plain bearing end and on the end and on the
on the suction side on the suction side suction side discharge side
▪ Axial suction nozzle ▪ Radial suction nozzle ▪ Drive on discharge ▪ Drive on suction side
(block flange up to side
size 50) ▪ Drive on discharge
side
▪ Drive on discharge
side
Multitec-RO: DN 200, DN 250:
installation type A only installation types C and D only
Drive Electric motor, diesel engine, turbine
Axial thrust balancing By balance drum7)
8) 3
Qmax 850 m /h 1500 m3/h
9)
Hmax 630 m (1000 m )
p2 max 63 bar (100 bar9))
tmax -10 °C to +200 °C,
Multitec-RO up to 45 °C
Shaft seal Uncooled gland packing, cooled or uncooled mechanical seal; single or double cartridge seal
Material Casing: Casing: grey cast iron, nodular cast iron10), steel,
▪ Grey cast iron, steel, stainless steel for Multitec stainless steel
Hydraulic system: grey cast iron, bronze, steel,
▪ Duplex and super duplex stainless steel for stainless steel
Multitec-RO
Hydraulic system:
▪ Grey cast iron, bronze, stainless steel for
Multitec
▪ Duplex and super duplex stainless steel for
Multitec-RO

5) The direction of rotation is clockwise, seen from the motor end.

6) The direction of rotation is counter-clockwise, seen from the motor end.
7) For small numbers of stages without balance drum the axial thrust is completely absorbed by the thrust bearing.
8) The indicated Q values apply to 50 Hz; for 60 Hz values refer to the individual characteristic curves.
9) Only for individual sizes/designs
10) For DN 200 and DN 250 only

6 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Installation types E, F and V

Installation type E5) F5) V5)

▪ Horizontal close- ▪ Horizontal close- Vertical close-coupled pump

coupled pump coupled pump
▪ Common bearing for ▪ Common bearing for
pump and motor pump and motor
▪ Rigid coupling ▪ Rigid coupling
▪ Radial suction nozzle ▪ Axial suction nozzle
▪ Plain bearing at the ▪ Plain bearing at the
suction side suction side
H/Q range8) 100 m3/h, 250 m, up to 100 m3/h, 250 m, up to Up to 400 kW
nominal diameter 65 nominal diameter 65
Drive Standardised motor Standardised motor, Standardised motor
fixed bearing at the drive
end11)
Fixed bearing Motor11) Motor11): DN 32, DN 50, In lantern: DN 100,
DN 65 DN 125, DN 150, DN 200
Axial thrust balancing By balance drum7) By balance drum By balance drum7)
8)
Qmax 100 m3/h 850 m /h 3

Hmax 250 m 630 m

p2 max 40 bar 63 bar
tmax -10 °C to +140 °C -10 °C to +140 °C
Shaft seal Uncooled gland packing, uncooled mechanical seal, Uncooled gland packing, uncooled mechanical seal,
single single
Material Casing: grey cast iron Casing: grey cast iron, nodular cast iron12), steel,
Hydraulic system: grey cast iron, bronze stainless steel
Hydraulic system: Grey cast iron, bronze, stainless
steel

11) For Multitec 32, Multitec 50 and Multitec 65 the motor bearings on the coupling side are fixed bearings
12) For Multitec 200 only

Multitec/Multitec-RO 7
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Operating ranges by installation type

[m]
DN 65 DN 125 DN 200 DN 250
1000

A, B, C, D
630

400

A, B, C, D, V

250

A, B, C, D, E, F, V A, B, C, D, V C, D, V C, D

DN 65 DN 150 DN 200 DN 250

Fig. 1: Operating ranges by installation type

8 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Product benefits
▪ Space-saving compact design with axial inlet and product-
lubricated plain bearing
▪ Flexible, best matching adaptation to system condition by
variety of installation types and variable nozzle position
▪ Low NPSH value, improved suction behaviour and
operating reliability for suction lift operation by special
suction impeller
▪ Optimised efficiencies and reduced operating costs by
newly developed hydraulic system
▪ Versatile use by broad range of installation types,
materials and shaft seals
▪ Optimum selection for fluid to be pumped and operating
conditions by large choice of materials
▪ High resistance by casing wear rings / closing discs made of
corrosion-resistant material, economical and easy to
replace
▪ Shaft protected from wear by shaft protecting sleeve
made of stainless steel
▪ Axial thrust balancing by balance drum
– Low bearing load at changing operating condition
– Long life of rolling element bearings and shaft seals
– Use of standardised seals due to lower pressure in the
shaft seal chamber
▪ Longer service life, higher operating reliability, lower
operating costs, maintenance costs and investment costs
by maintenance-free, robust plain bearing made of silicon
carbide, also suitable for operation with frequent starts/
stops.
▪ Service-friendly by bearing assembly and mechanical seal
being easy to dismantle

Acceptance tests and warranty

Certificates / inspections/ acceptance tests on request:

▪ Test reports 2.2 to EN 10204 for pressure-retaining
components, shaft and impellers
▪ Hydrostatic pressure test of pressure-retaining
components
▪ Balancing test
▪ Hydraulic tests:
– Performance test to ISO 9906 or Hydraulic Institute
– NPSH test
– Vibration test
– Bearing temperature measurement
▪ Strip test
▪ Dimensional inspection
▪ Coating inspection
▪ Final inspection and testing

Multitec/Multitec-RO 9
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Pressure and temperature limits

Material JL1040 (GJL-250), EN-GJS 400-1513)
60

50

EN1092-2, PN40
40
P (bar)

ASME, Class 250

30

20
EN1092 -2, PN16

ASME, Class 125

10

0
-20 0 20 40 60 80 100 120 140 160 180 200
T (°C)

Material GP240GH+N (1.0619+N)

80

70
ASME, Class 600

60
EN1092-1, PN63

50
P (bar)

40

30
ASME, Class 300

EN1092-1, PN25
20

10

0
-20 0 20 40 60 80 100 120 140 160 180 200 220
T (°C)

13) Only for fluid temperatures up to 60 °C

10 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Material 1.4408
80

70

ASME, Class 600

60

50
P (bar)

EN1092 - 1, PN63

40

30
ASME, Class 300

20
EN1092 -1, PN25

10

0
-20 0 20 40 60 80 100 120 140 160 180 200 220
T (°C)

Material 1.4317, 1.4517, 1.4469

110

EN1092 -1, PN100, "100 bars"

100
ASME, Class 600, "100 bars"
90
EN1092-1, PN100, "80 bars"
80
ASME, Class 600, "80 bars"
70

60
P (bar)

50

EN1092-1, PN40 (1.4317)

40

30
EN1092
- 1, PN25

20 ASME, Class 300

10

0
-15 -10 -5 0 5 10 15 20 25 30 35 40 45 50
T (°C)

Multitec/Multitec-RO 11
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Materials
Material codes for versions with cast steel casing

Part No. Description Material code

1014) 1114)15) 1214)15) 1314) 1414)
106 Suction casing EN-GJL-250 EN-GJL-25016) / EN-EN- EN-EN-GJL-250 EN-EN-GJL-250
GJS-400-1517) GJL-25016) /
GJS-400-1517)
107 Discharge casing EN-EN-GJL-250 EN-EN- EN-EN- EN-EN-GJL-250 EN-EN-GJL-250
GJL-25016) / GJL-25016) /
GJS-400-1517) GJS-400-1517)
108 Stage casing EN-EN-GJL-250 EN-GJL-25016) / 1.0576 EN-GJL-250 EN-GJL-250
GJS-400-1517) S355J2H18) /
EN-GJL-25019)/
GJS-400-1517)
171 Diffuser EN-GJL-25020) EN-GJL-25020) CC480K-GS EN-GJL-25020) EN-GJL-25020)
21) 21) 21) 21)
210 Shaft C45+N C45+N / C45+N / C45+N C45+N21) 22)
1.4021+QT21) 1.4021+QT21)
230 Impeller EN-GJL-250 CC480K-GS CC480K-GS EN-GJL-250 1.4408
231 Suction impeller EN-GJL-250 CC480K-GS CC480K-GS 1.4408 1.4408
350 Bearing housing EN-GJL-250 EN-GJL-250 / EN- EN-GJL-250 / EN- EN-GJL-250 EN-GJL-250
GJS-400-1523) GJS-400-1523)
381/529 Plain bearing assembly SiC/SiC SiC/SiC SiC/SiC SiC/SiC SiC/SiC
441 Stuffing box housing EN-GJL-250 EN-GJL-250 / EN-GJL-250 / EN-GJL-250 EN-GJL-250
GP240GH+N / GP240GH+N /
EN-GJS-400-1524) EN-GJS-400-1524)
502.1 Casing wear ring (suction side) EN-GJL-25025) 1.413825) 1.413825) EN-GJL-25025) EN-GJL-25025)
502.2 26) Casing wear ring (stages) EN-GJL-250 1.4138 1.4138 EN-GJL-250 EN-GJL-250
17) Casing wear ring (diffuser) - 1.4138 1.4138 - -
502.3
523 Shaft sleeve 1.4057+QT800 1.4057+QT800 1.4057+QT800 1.4057+QT800 1.4057+QT800
(mechanical seal)
524 Shaft protecting sleeve 1.4122 1.4122 1.4122 1.4122 1.4122
(gland packing)
550.127) Sheet metal disc 1.4301 1.4301 1.4301 1.4301 1.4301
59-4 Balance drum 1.4021 1.4021 1.4021 1.4021 1.4021
540 Bush EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250
905 Tie bolt 42 CrMo4 42 CrMo4 42 CrMo4 42 CrMo4 42 CrMo4

Material codes for versions with grey cast iron / steel casing

Part No. Description Material code

1514) 1614) 1714)
106 Suction casing GP240GH+N GP240GH+N GP240GH+N
107 Discharge casing GP240GH+N GP240GH+N GP240GH+N
108 Stage casing EN-GJL-250 1.0576 S355J2H18) / EN-GJL-250
EN-GJL-25019)
171 Diffuser EN-GJL-25020) CC480K-GS EN-GJL-250 20)
21) 21)
210 Shaft C45+N C45+N C45+N21)
230 Impeller CC480K-GS CC480K-GS EN-GJL-250

14) For fluid temperatures up to t ≤ 140 °C. For sizes DN 200 and DN 250 for fluid temperatures up to t ≤ 60 °C. For material
codes 15, 16, 17 for fluid temperatures up to t ≤ 40 °C.
15) Sizes DN 200 and DN 250 only available in material codes 11 and 12
16) Only for sizes DN 32 to DN 150
17) Only for sizes DN 200 and DN 250
18) For sizes DN 32 to DN 100
19) For sizes DN 125 to DN 150
20) Sizes DN 32 to DN 100: integrated in stage casing, sizes DN 125 to DN 250: separate
21) C45+N not available for sizes DN 200 and DN 250. Shaft also available in 1.4021 for sizes DN 32 to DN 150. Shaft for sizes
DN 200 and DN 250 only available in 1.4021.
22) Available in 1.4462
23) Only for size DN 250, all other sizes in material EN-GJL-250
24) For sizes DN 32 to DN 150 only in material EN-GJL-250. For size DN 200 only in GP240GH+N. For size DN 250 only in material
EN-GJS-400-15.
25) For sizes DN 100 to DN 250
26) Only for sizes DN 125 to DN 250
27) For sizes DN 32 to DN 100 only; also used as casing wear ring

12 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Part No. Description Material code

1514) 1614) 1714)
231 Suction impeller CC480K-GS CC480K-GS EN-GJL-250
350 Bearing housing EN-GJL-250 EN-GJL-250 EN-GJL-250
381/529 Plain bearing assembly SiC/SiC SiC/SiC SiC/SiC
441 Stuffing box housing EN-GJL-250 EN-GJL-250 EN-GJL-250
502.1 Casing wear ring (suction side) 1.4138 1.4138 EN-GJL-250
502.2 26) Casing wear ring (stages) 1.4138 1.4138 EN-GJL-250
502.317) Casing wear ring (diffuser) - - -
523 Shaft sleeve 1.4057+QT800 1.4057+QT800 1.4057+QT800
(mechanical seal)
524 Shaft protecting sleeve 1.4122 1.4122 1.4122
(gland packing)
550.127) Sheet metal disc 1.4301 1.4301 1.4301
59-4 Balance drum 1.4021 1.4021 1.4021
540 Bush EN-GJL-250 EN-GJL-250 EN-GJL-250
905 Tie bolt 30 NCD 16 30 NCD 16 30 NCD 16

Material codes 20, 21, 22 and 23 for versions with cast steel casing

Part No. Description Material code

20 21 22 23
106 Suction casing GP240GH+N GP240GH+N GP240GH+N GP240GH+N
107 Discharge casing GP240GH+N GP240GH+N GP240GH+N 1.4408
108 Stage casing 1.0576 S355J2H18) / 1.0576 S355J2H18) / 1.0576 S355J2H18) / 1.0576 S355J2H18) /
GP240GH+N19) GP240GH+N19) GP240GH+N19) GP240GH+N19)
171 Diffuser EN-GJL-250 EN-GJL-250 1.4408 1.4408
210 Shaft C45+N21) C45+N21) 1.4021+QT22) 1.4021+QT22)
230 Impeller EN-GJL-250 EN-GJL-250 1.4408 1.4408
231 Suction impeller EN-GJL-250 1.4408 1.4408 1.4408
350 Bearing housing EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250
381/529 Plain bearing assembly SiC/SiC SiC/SiC SiC/SiC SiC/SiC
441 Stuffing box housing GP240GH+N / GP240GH+N / 1.4404 GP240GH+N / 1.4404 1.4408 /
1.440428) 28) 28)
1.4404 28)
502.1 Casing wear ring (suction side) EN-GJL-250 EN-GJL-250 1.4138 1.4138
502.2 26) Casing wear ring (stages) EN-GJL-250 EN-GJL-250 1.4138 1.4138
502.317) Casing wear ring (diffuser) - - - -
523 Shaft sleeve 1.4057+QT800 1.4057+QT800 1.4571 1.4571
(mechanical seal)
524 Shaft protecting sleeve 1.4122 1.4122 1.4122 1.4122
(gland packing)
550.127) Sheet metal disc 1.4301 1.4301 1.4571 1.4571
59-4 Balance drum 1.4021 1.4021 1.4021 1.4021
540 Bush EN-GJL-250 EN-GJL-250 1.4021 1.4021
905 Tie bolt 30 NCD 16 30 NCD 16 30 NCD 16 30 NCD 16

Material codes 25, 26, 27 and 28 for versions with cast steel casing

Part No. Description Material code

25 26 27 28
106 Suction casing GP240GH+N GP240GH+N GP240GH+N 1.4317
107 Discharge casing GP240GH+N GP240GH+N 1.4317 1.4317
108 Stage casing 1.0576 S355J2H 18)/ 1.0576 S355J2H18)/ 1.0576 S355J2H 18)/ 1.0576 S355J2H 18)/
GP240GH+N19) GP240GH+N19) GP240GH+N19) GP240GH+N19)
1.431729) 1.431729)
171 Diffuser EN-GJL-250 CC480K-GS EN-GJL-250 EN-GJL-250
210 Shaft C45+N21) C45+N21) 1.4021+QT 1.4021+QT
230 Impeller CC480K-GS CC480K-GS EN-GJL-250 EN-GJL-250
231 Suction impeller CC480K-GS CC480K-GS EN-GJL-250 EN-GJL-250
350 Bearing housing EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250

28) For shaft seal codes 64 and 164 only 1.4404

29) Size DN 125: last stage casing made of 1.4317

Multitec/Multitec-RO 13
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Part No. Description Material code

25 26 27 28
381/529 Plain bearing assembly SiC/SiC SiC/SiC SiC/SiC SiC/SiC
441 Stuffing box housing GP240GH+N / 1.4404 GP240GH+N / GP240GH+N / GP240GH+N /
28)
1.440428) 1.440428) 1.440428)
502.1 Casing wear ring (suction side) 1.4138 1.4138 EN-GJL-250 EN-GJL-250
502.2 26) Casing wear ring (stages) 1.4138 1.4138 EN-GJL-250 EN-GJL-250
502.317) Casing wear ring (diffuser) - - - -
523 Shaft sleeve 1.4057+QT800 1.4057+QT800 1.4057+QT800 1.4057+QT800
(mechanical seal)
524 Shaft protecting sleeve 1.4122 1.4122 1.4122 1.4122
(gland packing)
550.127) Sheet metal disc 1.4301 1.4301 1.4301 1.4301
59-4 Balance drum 1.4021 1.4021 1.4021 1.4021
540 Bush EN-GJL-250 EN-GJL-250 EN-GJL-250 EN-GJL-250
905 Tie bolt 30 NCD 16 30 NCD 16 30 NCD 16 30 NCD 16

Material code for versions with stainless steel casing

Part No. Description Material code

30 31 / RO 33 / RO
106 Suction casing 1.4408 1.4517 1.4469 PREN 40
107 Discharge casing 1.4408 1.4517 1.4469 PREN 40
108 Stage casing 1.440418)/ 1.4517 1.441018)/
1.440819) 1.4469 PREN 4019)
171 Diffuser 1.4408 1.4517 1.4469 PREN 40
210 Shaft 1.4462 1.4462 1.4501
230 Impeller 1.4408 1.4517 1.4469 PREN 40
231 Suction impeller 1.4408 1.4517 1.4469 PREN 40
350 Bearing housing EN-GJL-250 EN-GJL-250 EN-GJL-250
381/529 Plain bearing assembly SiC/SiC SiC/SiC SiC/SiC
441 Stuffing box housing 1.4408 / 1.4517 1.4469 PREN 40
1.440428)
502.1 Casing wear ring (suction side) 1.4571 1.4462 1.4501
502.2 26) Casing wear ring (stages) 1.4571 1.4462 1.4501
502.317) Casing wear ring (diffuser) - - -
523 Shaft sleeve 1.4571 1.4462 1.4501
(mechanical seal)
524 Shaft protecting sleeve - - -
(gland packing)
550.127) Sheet metal disc 1.4571 1.4539 1.4547
59-4 Balance drum 1.4404 1.4462 1.4501
540 Bush 1.4138 1.4462 1.4501
905 Tie bolt 30 NCD 16 30 NCD 16 30 NCD 16

Materials key

Description Code and material No. Standard To ASTM30)

Grey cast iron EN-GJL-250 EN 1561 A48:40B
Bronze CC480K-GS EN 1982 B505C90250
Steel C45+N / 1.0503+N EN 10083-2 A29Gr.1045
Steel S355J2H / 1.0576 EN 10210 A618 Grade III
Cast steel GP240GH+N / 1.0619+N EN 10213 A216WCB
Chrome steel 1.4021+QT / X20Cr13+QT EN 10088 A276:420
Chrome nickel steel 1.4122 / X35CrMo17 EN 10088 A276S42010
Chrome nickel steel 1.4057+QT800 / X17CrNi16-2- EN 10088 A276:431
QT800
Chrome nickel steel 1.4138 / GX120CrMo29-2 SEW 410 -
Chrome nickel steel 1.4301 / X5CrNi18-10 EN 10088 A276:304
Chrome nickel molybdenum steel 1.4404 / X2CrNiMo 17-12-2 EN 10088 A276:316L
Chrome nickel molybdenum cast 1.4408 / GX5CrNiMo19-11-2 EN 10213 A743CF8M
steel

30) Similar

14 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Description Code and material No. Standard To ASTM30)

Chrome nickel molybdenum steel 1.4462 / X2CrNiMoN22-5-3 EN 10088 A473S32950
Chrome nickel molybdenum steel 1.4571 / X6CrNiMoTi17-12-2 EN 10088 A276:316
Silicon carbide SiC without free silicon - SiC without free silicon
Steel bars 30 NCD 16 KSB materials data sheet, A540Gr.B24
material identification code
1179
Steel 42CrMo4 / 1.7225 EN 10083-1 A322GR.4140
Chrome nickel molybdenum cast 1.4317 EN 10213 A487 Grade CA6NM
steel
Cast duplex stainless steel 1.4517 EN 10213 A995 Grade CD4MCuN
Austenitic stainless steel 1.4539 EN 10088 A240 N08904
Cast super duplex stainless steel 1.446931) EN 10213 A995 Grade 5A
Super duplex stainless steel 1.4410 EN 10088 A276 S32750
Super duplex stainless steel 1.4501 EN 10088 A276 S32760
Austenitic stainless steel 1.4547 EN 10088 A240 S31254
Nodular cast iron GJS-400-15 EN 1563 A536 Grade 60_40_18

31) PREN ≥ 40 to EN 10213

Multitec/Multitec-RO 15
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Seal codes for the mechanical seal

Available versions of mechanical seals:
▪ Balanced and unbalanced
▪ Uncooled up to 140 °C or cooled up to 200 °C
▪ Single or double
▪ Cartridge mechanical seal

Key to the material code of the mechanical seal Code Material

Code Material U3 Tungsten carbide, NiCrMo-bonded
A Carbon graphite, antimony-impregnated E EPDM rubber
B Carbon graphite, resin-impregnated E4 EPDM peroxide-cured
Q1 Silicon carbide, solid, sintered without pressure V Fluoroelastomer, e.g. Viton
Q12 Silicon carbide, shrink-fitted, sintered without V5 Fluoroelastomer, e.g. Viton (90 shore)
pressure M Hastelloy
U2 Tungsten carbide, Ni-bonded (solid) G CrNiMo steel

Seal codes of the mechanical seal

Mechanical seal Material Static Uncooled Cooled Pressure [bar]

sealing ≤ 45 °C ≤ 100 ≤ 120 ≤ 140 ≤ 200 °C Min. Max.
elements °C °C °C
Bellows-type mechanical U3BEGG EPDM 61 (RGM13) - - -0,2 18
seal, unbalanced
Balanced mechanical seal Q1Q1VGG FPM 163 (5B), 63 (H7N) - - -0,2 16
Q1Q1VGG EPDM 43 (57B) - - -0,2 25
AQ1EGG32), EPDM - 164 (5B), -0,2 40
Q1AEGG33) 64 (H7N)
BQ1EGG32), EPDM 167 (5B), - - -0,2 40
Q1BE4GG33) 67 (H7N)
AQ1EMG EPDM 69 (HRN) - - -0,5 25
AQ1EGG, EPDM 181 (5B), - - -0,2 40
Q1AEGG33) 42 (57B),
81 (H7N)
Q12Q1VGG33) FPM 53 (HJ977GN) - - -0,2 10
AQ1VGG,Q1A FPM 155 (5B), - - -0,2 40
VGG 45 (57B-BO),
55 (H7N)
BQ1EMG EPDM 59 (HRN) - - -0,5 25
Bellows-type mechanical U3U3VGG FPM 68 (MG13- - - -0,2 12
seal, unbalanced G60, MG1S4-
G4)34)
Single mechanical seal

Balanced mechanical seal U2U2VGG, FPM 168 (5B)35), - - -0,2 16

U3U3VGG 68 (H7N)35)
Mechanical seal, AQ1VMM FPM 80 (MG12-G6) - - -0,2 16
unbalanced Q1AVMM FPM 82 (M7N) - - -0,2 25
Q1Q1VMM FPM 83 (MG12-G6) - - -0,2 10
Quench arrangement AQ1EGG, EPDM 171 (5B), - - -0,2 40
Q1AEGG 71 (H7N)
mechanical

Tandem arrangement AQ1EGG, EPDM 172 (5B/5B), - - -0,3 40

Q1AEGG 72 (H7N/H7N)
Double

Back-to-back arrangement AQ1EGG, EPDM 173 (5B/5B), - - -0,98 40

seal

Q1AEGG 73 (H7N/H7N)

Balanced mechanical seal AQ1EMG EPDM 92 (Cartex - - -0,5 25

SN6)
mechanical

Q1Q1VMG FPM 93 (Cartex - - -0,5 12

Cartridge

SN6)
AQ1VMG FPM 95 (Cartex - - -0,5 25
seal

SN6)

32) For 5B
33) For H7N
34) MG13 for sizes DN 32 and DN 50. MG1S4 for size DN 65.
35) Only for sizes DN 100, 125, 150, 200 and 250.

16 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Seal codes for the gland packing

Available versions: uncooled up to 140 °C

Seal codes for gland packing

Gland packing Static sealing elements Seal code Pmax

Up to 100 °C Up to 140 °C [bar]
PTFE-impregnated polyacryl FPM 65 - 25
PTFE-impregnated polyacryl EPDM 66 25

Gland packing versions

N/b N/c
System conditions Suction head operation PS PS absolute< 1 bar (vessel under vacuum) with clean liquid from an external
absolute≥ 1 bar source
Barrier pressure > pressure to be sealed off
Technical features Without lantern ring 1 lantern ring, suction side
1 lantern ring, discharge side
2 tapped holes for piping

Multitec/Multitec-RO 17
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Technical data
Technical data
Bearing Gland packing Shaft protecting sleeve Drive Other
(P/N value)

spacer-type couplings
Number of packing rings
at the coupling
Shaft diameter

Lantern ring width

Maximum impeller
Single mechanical

Spacer length of
Gland packing

Hydraulic system
Shaft 1.4021+QT
Packing ring
dimensions
Radial bearing
Fixed bearing

Plain bearing

Shaft: C45+N

diameter
Shaft 1.4462

Shaft 1.4501
seal
Size

[mm] [mm] [mm] [mm]

32 22 6309 ZZ C3-HT 6309 ZZ SiC 10 × 10 20 5 45 Ø 35/38 Ø 0,0214 0,0346 0,0302 0,0356 2,1 142 140
C3-HT36)
50 28 2 × 7309 BUA 6309 ZZ SiC 10 × 10 20 5 45 Ø 35/38 Ø 0,0523 0,0846 0,0738 0,0869 3,1/ 170/ 140
C3-HT36) 4,1 173
65 32 2 × 7309 BUA 6309 ZZ SiC 10 × 10 20 5 45 Ø 40 Ø 0,0697 0,1128 0,0984 0,1159 5,1/ 193/ 140
C3-HT36) 6,1 214
100 40 2 × 7312 BUA 6312C3 SiC 12 × 12 25 5 56 Ø 50 Ø 0,15 0,2426 0,2118 0,2495 7,1/ 241/ 180
8,1 245
125 50 2 × 7312 BUA 6312C3 SiC 12 × 12 25 6 66 Ø 60 Ø 0,3016 0,4879 0,4258 0,5016 9,1/ 301/ 180
9,2 273
125 50 2 × 7312 BUA 6312C3 SiC 12 × 12 25 6 66 Ø 60 Ø 0,3016 0,4879 0,4258 0,5016 10,1/ 305/ 180
10,2 270
150 60 2 × 7315 BUA 6315C3 SiC 16 × 16 32 6 78 Ø 70 Ø 0,5371 0,8688 0,7582 0,8930 11,1/ 378/ 200
11,2 342
150 60 2 × 7315 BUA 6315C3 SiC 16 × 16 32 6 78 Ø 70 Ø 0,5371 0,8688 0,7582 0,8930 12,1/ 382/ 200
12,2 337
200 60 2 × 7315 BUA 6315C3 SiC 16 × 16 32 6 78 Ø 70 Ø - 0,8688 - - 13,1/ 418/ 200
13,2 387
200 60 2 × 7315 BUA 6315C3 SiC 16 × 16 32 6 78 Ø 70 Ø - 0,8688 - - 14,1/ 426/ 200
14,2 390
250 72 2 × 7318 BUA 6318C3 - 16 × 16 32 6 90 Ø 85 Ø - 1,38 - - 15,1/ 477/4 250
15,2/ 31
16,1

Noise characteristics

Surface sound pressure level LpA37)38)

Rated power input PN Pump Pump with electric motor

[kW] 1450 rpm [dB] 2900 rpm [dB] 1450 rpm [dB] 2900 rpm [dB]
2,2 56 57 60 65
3,0 58 60 62 67
4,0 59 61 63 68
5,5 61 63 65 70
7,5 63 65 66 71
9 64 66 68 73
11 65 67 68 73
15 66 68 70 75
18,5 67 69 71 76
22 68 70 72 77
30 69 71 73 78
37 70 72 74 79
45 71 73 75 79
55 71 74 75 80
75 72 74 77 82
90 72 75 77 82
110 73 75 78 83
132 73 76 78 83
160 74 76 79 84
200 75 77 80 85
250 75 78 80,5 -
315 76 78 81 -
355 78 80 81 -
400 79 81 82 -
500 80 82 82 -

36) Applies to grease-lubricated bearings. For oil-lubricated bearings: type 6309C3

37) Measured at a distance of 1 m from the pump outline (as per DIN 45 635 Parts 1 and 24)
38) Increase for 60 Hz operation: 3500 rpm +3 dB; 1750 rpm +1 dB

18 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Rated power input PN Pump Pump with electric motor

[kW] 1450 rpm [dB] 2900 rpm [dB] 1450 rpm [dB] 2900 rpm [dB]
560 80 82 82 -
630 82 83 84 -
710 82,5 84 84 -
800 82,5 - 84 -
900 82,5 - 84 -
1000 82,5 - 84 -
1120 82,5 - 84 -
1200 82,5 - 84 -
Up to 1400 83 - 84 -

Noise characteristics for other ratings/speeds on request.

Noise characteristics can only be guaranteed after consultation with the design/engineering department.

Multitec/Multitec-RO 19
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Selection Charts

Multitec/Multitec-RO, 50 Hz, n = 2900 rpm

10 US.gpm 20 30 40 50 100 200 300 400 500 1000 2000 3000 4000

10 IM.gpm 20 30 40 50 100 200 300 400 500 1000 2000 3000

1000
3000

2000

500

400

150-11.1 150-12.1
300 1000

125-9.1
32-2.1 50-3.1 50-4.1 65-5.1 65-6.1 100-7.1 100-8.1 125-10.1
150-11.2 150-12.2
200

125-9.2 500
125-10.2

400

100
300

H
[m]

200

50

ft
40

30 100
2 3 4 5 Q[m³/h] 10 20 30 40 50 100 200 300 400 500 1000

1 l/s 2 3 4 5 10 20 30 40 50 100 200

20 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Multitec/Multitec-RO, 50 Hz, n = 1450 rpm

5 US.gpm 10 20 30 40 50 100 200 300 400 500 1000 2000 3000 40005000

4 5 IM.gpm 10 20 30 40 50 100 200 300 400 500 1000 2000 3000 40005000
500

400

300 1000

150-11.1
150-12.1
200
125-9.1
200-14.1
500
250-15.1
200-13.1 250-16.1
400
65-6.1
50-3.1 50-4.1 125-10.1
100
65-5.1 100-8.1 300
100-7.1

250-15.2
32-2.1 200
200-13.2
50 150-11.2 200-14.2

40 150-12.2
125-9.2
125-10.2
30 100

ft
20

H
50
[m]

40

10
9 30
1 Q[m³/h] 2 3 4 5 10 20 30 40 50 100 200 300 400 500 1000 2000

0.3 0.4 0.5 l/s 1 2 3 4 5 10 20 30 40 50 100 200 300 400 500

Multitec/Multitec-RO 21
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Multitec/Multitec-RO, 60 Hz, n = 3500 rpm

20 30 40 50 US.gpm 100 200 300 400 500 1000 2000 3000 4000 5000

20 30 40 50 IM.gpm 100 200 300 400 500 1000 2000 3000 4000
1000
3000

2000

500

400
150-12.2

32-2.1 50-3.1 50-4.1 65-5.1 65-6.1 100-7.1 100-8.1 125-9.1 125-10.1 150-11.2
300 1000

125-9.2 125-10.2 ft
200

500

400

100
300

H
[m]

200

50
3 4 5 Q[m³/h] 10 20 30 40 50 100 200 300 400 500 1000 1200

1 l/s 2 3 4 5 10 20 30 40 50 100 200 300

22 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Multitec/Multitec-RO, 60 Hz, n = 1750 rpm

5 US.gpm 10 20 30 40 50 100 200 300 400 500 1000 2000 3000 40005000

4 5 IM.gpm 10 20 30 40 50 100 200 300 400 500 1000 2000 3000 40005000
500

400

300 250-15.1 1000

150-11.1
125-9.1 150-12.1 200-14.1

200-13.1 250-16.1
125-10.1
200

65-6.1 100-7.1 100-8.1

500
50-3.1 50-4.1
250-15.2
65-5.1 400
32-2.1
100
300
200-13.2

150-11.2
200-14.2
200
150-12.2
50 125-9.2
125-10.2

40

30 100

ft
20

H
50
[m]

40

10
1 Q[m³/h] 2 3 4 5 10 20 30 40 50 100 200 300 400 500 1000 2000

0.3 0.4 0.5 l/s 1 2 3 4 5 10 20 30 40 50 100 200 300 400 500

Drive
Driven by a three-phase current squirrel-cage motor of the following types of construction:

Types of construction

Included
Installation types A, B, C, D IMB3
Installation types E, F IMV1 up to 45 kW, for higher ratings IMB35
Installation type V IMV1
Enclosure IP 55/IP 23
Thermal class F
Direction of rotation of the pump ▪ Installation types A, B, C, E, F, V: clockwise, seen from the drive end
▪ Installation type D: counter-clockwise, seen from the drive end
Options Special voltages, explosion protection, insulated bearing, standstill heater

Multitec/Multitec-RO 23
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Dimensions

Dimensions of Multitec A, B, C, D and Multitec-RO

A39)

B39)

C39)

D39)

Shaft dimensions [mm]

Size d1 t t2 u
32 22 24,5 - 6
50 28 31 - 8
65 32 35 38 10

39) Some designs are fitted with a shaft with two keys.

24 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Size d1 t t2 u
100 40 43 46 12
125 50 53,5 57 14
150 60 64 - 18
200 60 64 - 18
25040) 72 76,5 - 20

Connections

Connection G = ISO 228/1, Multitec A / Multitec-RO A Multitec B, C, D

Rp = ISO 7/1 32 50 65 100 125 150 32 50 65 100 125 150 20040) 25040)
41) G - - 1 1
1M.1 ½ ½ ½ ½ ½ ½ ½ ½ ½ ½
1M.241) G ½ ½ ½ ½ ½ ½ ½ ½ ½ ½ ½ ½ 1 ½
6B.141) G - - ¼ ½ ½ ½ ¼ ¼ ½ ½ ½ 1 1 1
6B.241) G ¼ ¼ ½ ½ ½ ½ ¼ ¼ ½ ½ ½ ½ 1 1
8B Rp ⅜ ⅜ ⅜ ⅜ ⅜ ⅜ ⅜ ⅜ ⅜ ⅜ ⅜ ⅜ 1 ½

Dimensions of Multitec A, B, C and D [mm]

DN1 DN2 a d1 k7 d2 e f f1 h1 h2 i l1 l2 l3 l4 l5 l6 m2 m3 m4 n1 n2 s
Number of stages

Material code
A, B, C, D
Multitec

Radial
Axial

32 2 65 50 32 168 22 16 121 309 295 132 175 9 50 255 241 304 56 306 20 40 115 330 290 20
3 65 50 32 223 22 16 176 309 295 132 175 9 50 255 241 304 56 306 20 40 170 330 290 20
4 65 50 32 278 22 16 231 309 295 132 175 9 50 255 241 304 56 306 20 40 225 330 290 20
17, 20, 21, 22, 23, 25, 26, 30
10, 11, 12, 13, 14, 15, 16,

5 65 50 32 333 22 16 286 309 295 132 175 9 50 255 241 304 56 306 20 40 280 330 290 20
6 65 50 32 388 22 16 341 309 295 132 175 9 50 255 241 304 56 306 20 40 335 330 290 20
7 65 50 32 443 22 16 396 309 295 132 175 9 50 255 241 304 56 306 20 40 390 330 290 20
8 65 50 32 498 22 16 451 309 295 132 175 9 50 255 241 304 56 306 20 40 445 330 290 20
9 65 50 32 553 22 16 506 309 295 132 175 9 50 255 241 304 56 306 20 40 500 330 290 20
10 65 50 32 608 22 16 561 309 295 132 175 9 50 255 241 304 56 306 20 40 555 330 290 20
11 65 50 32 663 22 16 616 309 295 132 175 9 50 255 241 304 56 306 20 40 610 330 290 20
12 65 50 32 718 22 16 671 309 295 132 175 9 50 255 241 304 56 306 20 40 665 330 290 20
13 65 50 32 773 22 16 726 309 295 132 175 9 50 255 241 304 56 306 20 40 720 330 290 20
14 65 50 32 828 22 16 781 309 295 132 175 9 50 255 241 304 56 306 20 40 775 330 290 20
50 2 100 80 50 19042) 28 16 151 350 338 150 200 18 61 262 250 356 5742) 355 20 40 128 330 290 20
3 100 80 50 25242) 28 16 213 350 338 150 200 18 61 262 250 356 5742) 355 20 40 190 330 290 20
10, 11, 12, 13, 14, 15, 16, 17, 20, 21,
22, 23, 25, 26, 30, 31 (RO), 33 (RO)

4 100 80 50 31442) 28 16 275 350 338 150 200 18 61 262 250 356 5742) 355 20 40 252 330 290 20
5 100 80 50 37642) 28 16 337 350 338 150 200 18 61 262 250 356 5742) 355 20 40 314 330 290 20
6 100 80 50 43842) 28 16 399 350 338 150 200 18 61 262 250 356 5742) 355 20 40 376 330 290 20
7 100 80 50 50042) 28 16 461 350 338 150 200 18 61 262 250 356 5742) 355 20 40 438 330 290 20
8 100 80 50 56242) 28 16 523 350 338 150 200 18 61 262 250 356 5742) 355 20 40 500 330 290 20
9 100 80 50 62442) 28 16 585 350 338 150 200 18 61 262 250 356 5742) 355 20 40 562 330 290 20
10 100 80 50 68642) 28 16 647 350 338 150 200 18 61 262 250 356 5742) 355 20 40 624 330 290 20
11 100 80 50 74842) 28 16 709 350 338 150 200 18 61 262 250 356 5742) 355 20 40 686 330 290 20
12 100 80 50 81042) 28 16 771 350 338 150 200 18 61 262 250 356 5742) 355 20 40 748 330 290 20
13 100 80 50 87242) 28 16 833 350 338 150 200 18 61 262 250 356 5742) 355 20 40 810 330 290 20
14 100 80 50 93442) 28 16 895 350 338 150 200 18 61 262 250 356 5742) 355 20 40 872 330 290 20
15 100 80 50 99642) 28 16 957 350 338 150 200 18 61 262 250 356 5742) 355 20 40 934 330 290 20
65 2
22, 23, 25, 26, 27, 30, 31 (RO), 33 (RO)

125 100 65 247 32 20 189 393 380 190 225 18 82 303 291 399 77 394 30 60 169 405 365 25
10, 11, 12, 13, 14, 15, 16, 17, 20, 21,

3 125 100 65 326 32 20 268 393 380 190 225 18 82 303 291 399 77 394 30 60 248 405 365 25
4 125 100 65 405 32 20 347 393 380 190 225 18 82 303 291 399 77 394 30 60 327 405 365 25
5 125 100 65 484 32 20 426 393 380 190 225 18 82 303 291 399 77 394 30 60 406 405 365 25
6 125 100 65 563 32 20 505 393 380 190 225 18 82 303 291 399 77 394 30 60 485 405 365 25
7 125 100 65 642 32 20 584 393 380 190 225 18 82 303 291 399 77 394 30 60 564 405 365 25
8 125 100 65 721 32 20 663 393 380 190 225 18 82 303 291 399 77 394 30 60 643 405 365 25
9 125 100 65 800 32 20 742 393 380 190 225 18 82 303 291 399 77 394 30 60 722 405 365 25
10 125 100 65 879 32 20 821 393 380 190 225 18 82 303 291 399 77 394 30 60 801 405 365 25
11 125 100 65 958 32 20 900 393 380 190 225 18 82 303 291 399 77 394 30 60 880 405 365 25

12 125 - 65 1037 32 20 - 393 - 190 225 - 82 - - - 77 394 30 60 959 405 365 25

13 125 - 65 1116 32 20 - 393 - 190 225 - 82 - - - 77 394 30 60 1038 405 365 25
31 (RO),
33 (RO)

14 125 - 65 1195 32 20 - 393 - 190 225 - 82 - - - 77 394 30 60 1117 405 365 25

15 125 - 65 1274 32 20 - 393 - 190 225 - 82 - - - 77 394 30 60 1196 405 365 25
16 125 - 65 1353 32 20 - 393 - 190 225 - 82 - - - 77 394 30 60 1275 405 365 25

40) For installation types C and D only

41) Not provided on Multitec RO A
42) For material variants 15, 16, 17, 20, 21, 22, 23, 25, 26, 30, 31 (RO) with ANSI flanges add 15 mm to dimensions “a” and “l5”.

Multitec/Multitec-RO 25
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

DN1 DN2 a d1 k7 d2 e f f1 h1 h2 i l1 l2 l3 l4 l5 l6 m2 m3 m4 n1 n2 s
Number of stages

Material code
A, B, C, D
Multitec

Radial
Axial
100 2 150 125 100 306 40 26 233 472 463 235 275 30 110 339 329 492 103 462 35 70 213 504 450 30
10, 11, 12, 13, 14, 15, 16, 17, 20, 21, 22,
23, 25, 26, 27, 28, 30, 31 (RO), 33 (RO)

3 150 125 100 396 40 26 323 472 463 235 275 30 110 339 329 492 103 462 35 70 303 504 450 30
4 150 125 100 486 40 26 413 472 463 235 275 30 110 339 329 492 103 462 35 70 393 504 450 30
5 150 125 100 576 40 26 503 472 463 235 275 30 110 339 329 492 103 462 35 70 483 504 450 30
6 150 125 100 666 40 26 593 472 463 235 275 30 110 339 329 492 103 462 35 70 573 504 450 30
7 150 125 100 756 40 26 683 472 463 235 275 30 110 339 329 492 103 462 35 70 663 504 450 30
8 150 125 100 846 40 26 773 472 463 235 275 30 110 339 329 492 103 462 35 70 753 504 450 30
9 150 125 100 936 40 26 863 472 463 235 275 30 110 339 329 492 103 462 35 70 843 504 450 30
10 150 125 100 1026 40 26 953 472 463 235 275 30 110 339 329 492 103 462 35 70 933 504 450 30
11 150 125 100 1116 40 26 1043 472 463 235 275 30 110 339 329 492 103 462 35 70 1023 504 450 30

125 2 200 150 125 393 50 26 292 488 478 300 325 10 110 355 345 488 111 464 22 94 306 320 250 30
3 200 150 125 505 50 26 404 488 478 300 325 10 110 355 345 488 111 464 22 94 418 320 250 30
10, 11, 12,

4 200 150 125 617 50 26 516 488 478 300 325 10 110 355 345 488 111 464 22 94 530 320 250 30
13, 14

5 200 150 125 729 50 26 628 488 478 300 325 10 110 355 345 488 111 464 22 94 642 320 250 30
6 200 150 125 841 50 26 740 488 478 300 325 10 110 355 345 488 111 464 22 94 754 320 250 30
7 200 150 125 953 50 26 852 488 478 300 325 10 110 355 345 488 111 464 22 94 866 320 250 30
8 200 150 125 1065 50 26 964 488 478 300 325 10 110 355 345 488 111 464 22 94 978 320 250 30
2
26, 27, 28, 30, 31 (RO), 33 (RO)

200 150 125 393 50 30 292 488 478 300 325 38 110 355 345 512 136 490 45 90 255 605 561 50
15, 16, 17, 20, 21, 22, 23, 25,

3 200 150 125 505 50 30 404 488 478 300 325 38 110 355 345 512 136 490 45 90 367 605 561 50
4 200 150 125 617 50 30 516 488 478 300 325 38 110 355 345 512 136 490 45 90 479 605 561 50
5 200 150 125 729 50 30 628 488 478 300 325 38 110 355 345 512 136 490 45 90 591 605 561 50
6 200 150 125 841 50 30 740 488 478 300 325 38 110 355 345 512 136 490 45 90 703 605 561 50
7 200 150 125 953 50 30 852 488 478 300 325 38 110 355 345 512 136 490 45 90 815 605 561 50
8 200 150 125 1065 50 30 964 488 478 300 325 38 110 355 345 512 136 490 45 90 927 605 561 50

150 2 250 200 150 452 60 34 338 594 578 350 400 22 140 426 411 600 137 567 30 104 342 350 265 30
10, 11, 12,

3 250 200 150 584 60 34 470 594 578 350 400 22 140 426 411 600 137 567 30 104 474 350 265 30
13, 14

4 250 200 150 716 60 34 602 594 578 350 400 22 140 426 411 600 137 567 30 104 606 350 265 30
5 250 200 150 848 60 34 734 594 578 350 400 22 140 426 411 600 137 567 30 104 738 350 265 30
6 250 200 150 980 60 34 866 594 578 350 400 22 140 426 411 600 137 567 30 104 870 350 265 30
2
25, 26, 30, 31 (RO), 33 (RO) 13, 14 25, 26, 30, 31 (RO), 33 (RO)

250 200 150 452 60 36 338 594 578 350 400 46 140 426 411 624 161 591 50 100 294 735 679 50
15, 16, 17, 20, 21, 22, 23, 10, 11, 12, 15, 16, 17, 20, 21, 22, 23,

3 250 200 150 584 60 36 470 594 578 350 400 46 140 426 411 624 161 591 50 100 426 735 679 50
4 250 200 150 716 60 36 602 594 578 350 400 46 140 426 411 624 161 591 50 100 558 735 679 50
5 250 200 150 848 60 36 734 594 578 350 400 46 140 426 411 624 161 591 50 100 690 735 679 50
6 250 200 150 980 60 36 866 594 578 350 400 46 140 426 411 624 161 591 50 100 822 735 679 50

7 250 200 150 1112 60 34 998 594 578 350 400 22 140 426 411 600 137 567 30 104 1002 350 265 30

250 200 150 1112 60 36 998 594 578 350 400 46 140 426 411 624 161 591 50 100 954 735 679 50

200 2 - 250 200 - 60 35 414 604 592 400 500 52 150 428 416 644 - 637 42 110 329 676 580 28,5
43)
3 - 250 200 - 60 35 574 604 592 400 500 52 150 428 416 644 - 637 42 110 489 676 580 28,5
4 - 250 200 - 60 35 734 604 592 400 500 52 150 428 416 644 - 637 42 110 649 676 580 28,5
11, 12

5 - 250 200 - 60 35 894 604 592 400 500 52 150 428 416 644 - 637 42 110 809 676 580 28,5
6 - 250 200 - 60 35 1054 604 592 400 500 52 150 428 416 644 - 637 42 110 969 676 580 28,5
250 2 300 - 250 - 72 44 504,5 649,5 649 450 600 39 155 478 478 709 - 688,5 60 90 405,5 755 650 30
43)
3 300 - 250 - 72 44 694,5 649,5 649 450 600 60 160 478 478 709 - 688,5 60 90 595,5 755 650 30
11, 12

4 300 - 250 - 72 44 884,5 649,5 649 450 600 60 160 478 478 709 - 688,5 60 90 785,5 755 650 30
5 300 - 250 - 72 44 1074,5 649,5 649 450 600 60 160 478 478 709 - 688,5 60 90 975,5 755 650 30

43) For installation types C and D only

26 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Dimensions of Multitec E, F
E

Multitec/Multitec-RO 27
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Connections

G = ISO 228/1, Multitec E Multitec F

Rp = ISO 7/1 32 50 65 32 50 65
1M.1 G ½ ½ ½ - - ½
1M.2 G ½ ½ ½ ½ ½ ½
6B.1 G ¼ ¼ ½ - - ¼
6B.2 G ¼ ¼ ½ ¼ ¼ ½
8B.1 Rp ⅜ ⅜ ⅜ ⅜ ⅜ ⅜
8B.2 Rp ⅜ ⅜ ⅜ ⅜ ⅜ ⅜

Dimensions of Multitec E and F [mm]

DN1 DN2 a b20 b30 d2 e h2 i1 l5 l8 l9 l11 n10 s2

of stages
Multitec

Number
E, F

Radial
Axial

32 2 65 50 32 168 290 330 18 121 175 9 56 150 580 60 330 6

3 65 50 32 223 290 330 18 176 175 9 56 150 580 60 330 6
4 65 50 32 278 290 330 18 231 175 9 56 300 650 60 330 6
5 65 50 32 333 290 330 18 286 175 9 56 300 650 60 330 6
6 65 50 32 388 290 330 18 341 175 9 56 355 700 60 330 6
7 65 50 32 443 290 330 18 396 175 9 56 410 760 60 330 6
50 2 100 80 50 190 290 330 18 151 200 18 57 150 580 60 330 6
3 100 80 50 252 290 330 18 213 200 18 57 150 580 60 330 6
4 100 80 50 314 290 330 18 275 200 18 57 300 650 60 330 6
5 100 80 50 376 290 330 18 337 200 18 57 355 700 60 330 6
6 100 80 50 438 290 330 18 399 200 18 57 410 760 60 330 6
65 2 125 100 65 247 365 405 18 189 225 18 77 200 760 60 405 6
3 125 100 65 326 365 405 18 268 225 18 77 270 900 60 405 6
4 125 100 65 405 365 405 18 347 225 18 77 350 1000 60 405 6

Variable dimensions for motors IP 55 with 2 or 4 poles (Multitec E and F 32-50-65, 50 Hz) [mm]
h6 2 poles 4 poles
Type

[kW]

n1044)

Multitec
n844)

IEC h3 q IEC h3 q
Flange

Flange
s344)
m7

m8
b6

d6

n7
i2

(FF)

(FF)
32 50 65 32 50 65 32 50 65

V1 2,2 - - 212 - - - - - - - - - 90L 215 - - - - 100L 215 302 309 330 335
3 - - 212 - - - - - - - - - 100L 215 302 - - 335 100L 215 302 309 330 335
4 - - 212 - - - - - - - - - 112M 215 302 - - 329 112M 215 302 309 330 329
5,5 - - 212 230 - - - - - - - - 132S 265 322 329 - 385 132S 265 322 329 350 385
7,5 - - 212 230 - - - - - - - - 132S 265 322 329 - 385 132M 265 322 329 350 385
11 - - 212 230 270 - - - - - - - 160M 300 352 359 381 494 160M 300 352 359 381 494
15 - - 212 230 270 - - - - - - - 160M 300 352 359 381 494 160L 300 352 359 381 494
18,5 - - 212 230 270 - - - - - - - 160L 300 352 359 381 494 180M 300 - 359 381 558
22 - - - 230 270 - - - - - - - 180M 300 - 359 381 558 - - - - - -
30 - - - 230 270 - - - - - - - 200L 350 - 362 381 611 - - - - - -
37 - - - 230 270 - - - - - - - 200L 350 - 362 381 611 - - - - - -
B35 45 140 19 - - 225 149 311 361 356 436 240 34 225M 400 - - 384 708 - - - - - -
55 50 24 - - 280 168 349 409 406 490 72 250M 500 - - 414 747 - - - - - -
75 50 24 - - 280 190 368 479 457 540 42 280S 500 - - 414 820 - - - - - -

44) For information purposes

28 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Dimensions of Multitec V
Z

Z
u1

t3
q

d7
d3

d5

l
Z
1M.2 h2 h2
d7
h3
h5

DN2
8B.1 h2

1M.1
e

m6
6B.3

m5
DN1
h2
s
h4

g
t1

d4
A
m6
80
m5

b11

Fig. 2: Multitec V dimensions

A For Multitec 200 only

Connections

Connection G = ISO 228/1, Multitec V

Rp = ISO 7/1 32 50 65 100 125 150 200
1M.1 G ½ ½ ½ ½ ½ ½ ½
1M.2 G ½ ½ ½ ½ ½ ½ ½
6B.3 G ¼ ¼ ½ ½ ½ 1 1
8B Rp ⅜ ⅜ ⅜ ⅜ ⅜ ⅜ ⅜

Shaft dimensions [mm]

Size d7 t3 u1 Size d7 t3 u1
32 30 33 8 100 40 43 12
50 30 33 8 125 50 53,5 14
65 35 38 10 150 60 64 18

Multitec V dimensions [mm]

DN1 DN2 b11 d4 e g h2 h4 m5 m6 s t1

Multitec V

of stages
Number

32 2 50 32 490 18 121 M16×250 MU 175 129 345 266 20 250

3 50 32 490 18 176 M16×250 MU 175 129 345 266 20 250
4 50 32 490 18 231 M16×250 MU 175 129 345 266 20 250
5 50 32 490 18 286 M16×250 MU 175 129 345 266 20 250
6 50 32 490 18 341 M16×250 MU 175 129 345 266 20 250
7 50 32 490 18 396 M16×250 MU 175 129 345 266 20 250
8 50 32 490 18 451 M16×250 MU 175 129 345 266 20 250
9 50 32 490 18 506 M16×250 MU 175 129 345 266 20 250
10 50 32 490 18 561 M16×250 MU 175 129 345 266 20 250
11 50 32 490 18 616 M16×250 MU 175 129 345 266 20 250
12 50 32 490 18 671 M16×250 MU 175 129 345 266 20 250
13 50 32 490 18 726 M16×250 MU 175 129 345 266 20 250
14 50 32 490 18 781 M16×250 MU 175 129 345 266 20 320

Multitec/Multitec-RO 29
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

DN1 DN2 b11 d4 e g h2 h4 m5 m6 s t1

Multitec V

of stages
Number

50 2 80 50 490 18 151 M16×320 MU 200 136 345 266 20 320

3 80 50 490 18 213 M16×320 MU 200 136 345 266 20 320
4 80 50 490 18 275 M16×320 MU 200 136 345 266 20 320
5 80 50 490 18 337 M16×320 MU 200 136 345 266 20 320
6 80 50 490 18 399 M16×320 MU 200 136 345 266 20 320
7 80 50 490 18 461 M16×320 MU 200 136 345 266 20 320
8 80 50 490 18 523 M16×320 MU 200 136 345 266 20 320
9 80 50 490 18 585 M16×320 MU 200 136 345 266 20 320
10 80 50 490 18 647 M16×320 MU 200 136 345 266 20 320
11 80 50 490 18 709 M16×320 MU 200 136 345 266 20 320
12 80 50 490 18 771 M16×320 MU 200 136 345 266 20 320
13 80 50 490 18 833 M16×320 MU 200 136 345 266 20 320
14 80 50 490 18 895 M16×320 MU 200 136 345 266 20 320
15 80 50 490 18 957 M16×320 MU 200 136 345 266 20 320
65 2 100 65 540 18 189 M16×320 MU 225 170 400 304 22 320
3 100 65 540 18 268 M16×320 MU 225 170 400 304 22 320
4 100 65 540 18 347 M16×320 MU 225 170 400 304 22 320
5 100 65 540 18 426 M16×320 MU 225 170 400 304 22 320
6 100 65 540 18 505 M16×320 MU 225 170 400 304 22 320
7 100 65 540 18 584 M16×320 MU 225 170 400 304 22 320
8 100 65 540 18 663 M16×320 MU 225 170 400 304 22 320
9 100 65 540 18 742 M16×320 MU 225 170 400 304 22 320
10 100 65 540 18 821 M16×320 MU 225 170 400 304 22 320
11 100 65 540 18 900 M16×320 MU 225 170 400 304 22 320
100 2 125 100 690 33 233 M30×400 MU 275 212 545 405 30 400
3 125 100 690 33 323 M30×400 MU 275 212 545 405 30 400
4 125 100 690 33 413 M30×400 MU 275 212 545 405 30 400
5 125 100 690 33 503 M30×400 MU 275 212 545 405 30 400
6 125 100 690 33 593 M30×400 MU 275 212 545 405 30 400
7 125 100 690 33 683 M30×400 MU 275 212 545 405 30 400
8 125 100 690 33 773 M30×400 MU 275 212 545 405 30 400
9 125 100 690 33 863 M30×400 MU 275 212 545 405 30 400
10 125 100 690 33 953 M30×400 MU 275 212 545 405 30 400
11 125 100 690 33 1043 M30×400 MU 275 212 545 405 30 400
125 2 150 125 690 33 292 M30×400 MU 325 227 545 405 30 400
3 150 125 690 33 404 M30×400 MU 325 227 545 405 30 400
4 150 125 690 33 516 M30×400 MU 325 227 545 405 30 400
5 150 125 690 33 628 M30×400 MU 325 227 545 405 30 400
6 150 125 690 33 740 M30×400 MU 325 227 545 405 30 400
7 150 125 690 33 852 M30×400 MU 325 227 545 405 30 400
8 150 125 690 33 964 M30×400 MU 325 227 545 405 30 400
150 2 200 150 750 33 338 M30×400 MU 400 250 600 430 30 400
3 200 150 750 33 470 M30×400 MU 400 250 600 430 30 400
4 200 150 750 33 602 M30×400 MU 400 250 600 430 30 400
5 200 150 750 33 734 M30×400 MU 400 250 600 430 30 400
6 200 150 750 33 866 M30×400 MU 400 250 600 430 30 400
7 200 150 750 33 988 M30×400 MU 400 250 600 430 30 400
200 2 250 200 1300 6×Ø36 414 M30×400 MU 500 300 800 890 25 400
×60 °
3 250 200 1300 6×Ø36 574 M30×400 MU 500 300 800 890 25 400
×60 °
4 250 200 1300 6×Ø36 734 M30×400 MU 500 300 800 890 25 400
×60 °
5 250 200 1300 6×Ø36 894 M30×400 MU 500 300 800 890 25 400
×60 °
6 250 200 1300 6×Ø36 1054 M30×400 MU 500 300 800 890 25 400
×60 °

45) Depending on the make

30 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Variable dimensions for motors IP 55 with 2 or 4 poles (Multitec V, 50 Hz) [mm]

q h5 IP55
Multitec

50 Hz/60 Hz h3
V

2 poles 4 poles 2 poles 4 poles

[kW] d3 d5 l d3 d5 l 32 50 65 100 125 150 32 50 65 100 125 150 200
2,2 45) 45) - - - 250 28 60 - - - - - - 302 309 331 - - - -
3,0 250 28 60 250 28 60 302 - - - - - 302 309 331 - - - -
4,0 250 28 60 250 28 60 302 309 - - - - 302 309 331 - - - -
5,5 300 38 80 300 38 80 322 329 - - - - 322 329 351 - - - -
7,5 300 38 80 300 38 80 322 329 351 - - - 322 329 351 - - - -
11,0 350 42 110 350 42 110 352 359 381 - - - 352 359 381 585 601 - -
15,0 350 42 110 350 42 110 352 359 381 - - - 352 359 381 585 601 - -
18,5 350 42 110 350 48 110 352 359 381 - - - - 359 381 585 601 - -
22,0 350 48 110 350 48 110 352 359 381 585 - - - 359 381 585 601 - -
30,0 400 55 110 400 55 110 355 362 381 585 - - - 362 381 585 601 - -
37,0 400 55 110 450 60 140 355 362 381 585 - - - - 414 615 631 - -
45,0 450 55 110 450 60 140 355 362 384 615 - - - - 414 615 631 - -
55,0 550 60 140 550 65 140 - 392 414 617 - - - - 414 617 633 740 -
75,0 550 65 140 550 75 140 - 392 414 617 - - - - - 617 633 740 735
90,0 550 65 140 550 75 140 - 392 414 617 633 - - - - 617 633 740 735
110,0 660 65 140 660 80 170 - - 444 647 663 - - - - 647 663 770 765
132,0 660 65 140 660 80 170 - - 444 647 663 - - - - - 663 770 765
160,0 660 65 140 660 80 170 - - - 647 663 - - - - - 663 770 765
200,0 660 70 140 660 80 170 - - - - - - - - - - - 770 765

Flange design (standard)

Flange designs (standard)

Material variant Maximum Flanges drilled to EN Flanges drilled to ASME Class

permissible Standard Suction flange Discharge Suction flange Discharge
discharge flange flange
pressure
10 - EN 1092-2 PN 16 PN 40 125 RF 250 RF
11 - EN 1092-2 PN 16 PN 40 125 RF 250 RF
12 - EN 1092-2 PN 16 PN 40 125 RF 250 RF
13 - EN 1092-2 PN 16 PN 40 125 RF 250 RF
14 - EN 1092-2 PN 16 PN 40 125 RF 250 RF
15 - EN 1092-1 PN 25 PN 63 300 RF 600 RF46)
16 - EN 1092-1 PN 25 PN 63 300 RF 600 RF46)
17 - EN 1092-1 PN 25 PN 63 300 RF 600 RF46)
20 - EN 1092-1 PN 25 PN 63 300 RF 600 RF46)
21 - EN 1092-1 PN 25 PN 63 300 RF 600 RF46)
22 - EN 1092-1 PN 25 PN 63 300 RF 600 RF46)
23 - EN 1092-1 PN 25 PN 63 300 RF 600 RF46)
25 - EN 1092-1 PN 25 PN 63 300 RF 600 RF46)
26 - EN 1092-1 PN 25 PN 63 300 RF 600 RF46)
27 - EN 1092-1 PN 25 47) 300 RF 600 RF
PN 100
2847) - EN 1092-1 PN 40 PN 100 300 RF 600 RF
30 - EN 1092-1 PN 25 PN 63 300 RF 600 RF46)
31 (RO)/33 (RO) 63 bar EN 1092-1 PN 25 PN 63 300 RF 600 RF
80 bar/100 bar EN 1092-1 PN 25 PN 10047)

46) For size 32: discharge flange DN 1¼″ can also be supplied as DN 1½″ on request.
47) For Multitec 100 and 125 only

Multitec/Multitec-RO 31
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

Nozzle positions
The nozzle position is variable. The required nozzle position has to be selected when completing an order in the selection
program.

For all pump sizes and material variants nozzle position 0-0 (or illustration 2 for vertical installations) is only available for
versions with 3 or more stages. An exception is DN 150 in material variants 10, 11, 12, 13 and 14, for which nozzle position 0-0 is
available for versions with 2 or more stages. The nozzle position is generally defined seen from the drive.

Horizontal installation (A, B, C, D, E and F)

The first letter defines the suction nozzle, the second letter the discharge nozzle.
A - axial suction nozzle
0 - suction and/or discharge nozzle on top
R- suction and/or discharge nozzle on the
A-0 L-0
right
L - suction and/or discharge nozzle on the left

0-0 R-L

Vertical installation
The suction nozzle (at the bottom) serves as a fixed point. The illustration number indicates the offset position of the discharge
nozzle compared to the suction nozzle.
1 - offset by 180°
2 - aligned
3 - 90° offset to the left
4 - 90° offset to the right 1 2 3 4

32 Multitec/Multitec-RO
 Centrifugal Pumps
Multistage High-pressure Centrifugal Pumps

General assembly drawing with list of components (example)

Fig. 3: Multitec, installation type A, size 65-100

List of components
List of components

Part No. Part description Part No. Part description

106.2 Suction casing 525.1 Spacer sleeve
107 Discharge casing 529 Bearing sleeve SiC
108.2 Stage casing 540.1 Bush
160.2 Cover 550.1 Sheet metal disc
171.1 Diffuser 550.3/.4/.7/.8 Disc
182.1 Foot 551.1 Spacer disc
210 Shaft 561.1/.2 Grooved pin
230.1 Impeller 565 Rivet
231 Suction stage impeller 59-4 Balance drum
320.1 Rolling element bearing 636 Lubricating nipple
350.1 Bearing housing 710.1/.2 Pipe
360.1 Bearing cover 731.1/.2/.3/.4/.16/.18 Pipe union
381 Bearing cartridge 732.1 Bracket
400.1 Gasket 81-92 Cover plate
411.1/.2/.3/.4/.7/.8/.13/.23/.24/.25 Joint ring 900.4 Screw
412.1/.2/.4/.5/.10 O-ring 901.1/.2 Hexagon head bolt
433.1 Mechanical seal 902.1/.2 Stud
441.1 Shaft seal housing 903.1/.2/.3/.4/.9 Screw plug
452 Gland follower 905 Tie bolt
461 Gland packing 914.1 Hexagon socket head cap
screw
471.1 Seal cover 920.1/.2/.3/.4/.5 Nut
502.1 Casing wear ring 931 Lock washer
507 Thrower 932.2 Circlip
520.1 Sleeve 940.1/.2/.3 Key
523.1 Shaft sleeve 970.1 Label/plate
524 Shaft protecting sleeve

Multitec/Multitec-RO 33
 11/04/2018
1777.5/11-EN

KSB SE & Co. KGaA

Johann-Klein-Straße 9 • 67227 Frankenthal (Germany)
Tel. +49 6233 86-0
www.ksb.com