Scribd
Upload
18 views

Assignment 10 Solutions

The document discusses various manufacturing processes and welding techniques. It contains 10 multiple choice questions about processes like grinding, lapping, surfacing, welding and soldering. The questions cover topics like hole correction, material removal mechanisms, need for surfacing, energy densities of welding processes, and factors that welding nugget strength depends on.

Uploaded by

Hemant Kumawat
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
18 views

Assignment 10 Solutions

The document discusses various manufacturing processes and welding techniques. It contains 10 multiple choice questions about processes like grinding, lapping, surfacing, welding and soldering. The questions cover topics like hole correction, material removal mechanisms, need for surfacing, energy densities of welding processes, and factors that welding nugget strength depends on.

Uploaded by

Hemant Kumawat
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Week – 10 solutions

1. The process used for the correction of the geometrical and dimensional inaccuracy of holes
is
A. Centreless grinding.
B. Turning
C. Polishing
D. Boring

2. The working mechanism for the material removal in the case of the lapping process
1.Cutting by the abrasives embedded in the soft tool surface
2.Erosion of the material by the hitting of the abrasives with the tool surface
3.Melting by the friction generated by the rubbing of abrasives.
A. 1 and 2
B. 1 only
C. 2 only
D. 1,2 and 3

3. Need of the surfacing process is/are


A. Improving the surface properties
B. Hard facing
C. Improving corrosion resistance
D. All of these.
4. The highest energy density amongst the following welding processes is for
A. Gas welding
B. Arc welding
C. Laser welding
D. Electron beam welding

5. The minimum oxygen and nitrogen in the weld metal found in the case of
A. GMAW process
B. SAW process.
C. GTAW process
D. FCAW process
6. The cleaning and sharpening of the loaded grinding wheel is termed as
A. Dressing
B. Truing
C. Cutting
D. Winding
7. The process of restoring shape of the worn-out grinding wheel with the help of a diamond-
dressing tool is called
A. Dressing
B. Truing
C. Cutting
D. Winding
8. The maximum temperature rise during soldering process is
A. Above 450℃
B. Below 450℃
C. Above 750℃
D. Below 780℃
9. In resistance welding, the strength of the weld nugget depends upon the
A. The thickness of the electrode
B. Weld nugget diameter
C. Base metal ultimate strength
D. All of these
10. Weld bonding refers to.
A. Joining the base metals using GTAW process
B. Combination of adhesive bonding and spot welding.
C. Combination of brazing and soldering
D. Solid-state welding process

You might also like