Scribd
Upload
272 views4 pages

Houghton Rust Veto 4222 S Spec Sheet

Uploaded by

Suprastowo Bin Sarino
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
272 views4 pages

Houghton Rust Veto 4222 S Spec Sheet

Uploaded by

Suprastowo Bin Sarino
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

PRODUCT DATA

RUST VETO® 4222-S


Rust Veto 4222-S is a water emulsifiable rust preventive which provides
excellent humidity protection. The product is readily emulsifiable in
either hard or soft water. No special mixing procedures are required.

An emulsion of Rust Veto 4222-S will deposit a thin, protective film on


treated surfaces. The thin film will typically provide corrosion protection,
on plain carbon or low alloy steel, for nine months indoors. Film removal
is accomplished with hot water and detergent.

APPLICATIONS

Rust Veto 4222-S, emulsified in water, provides excellent in-plant rust


protection. In-process inventory can be protected for up to nine months,
even in the most humid plant conditions. Flammable solvent-type rust
preventives and their hazards are eliminated when emulsified Rust Veto
4222-S is used.

Parts can be dipped into an emulsion of Rust Veto 4222-S, or because


of the product's low foaming tendency, parts can be successfully treated
in the final stage of power spray washers.

As a final preservative of blackened or phosphated parts, Rust Veto


4222-S has received wide acceptance. The thin film deposited by Rust
Veto 4222-S results in finished parts without an "oily" feel.

Houghton International Inc.


Madison and Van Buren Ave., P. O. Box 930, Valley Forge, PA 19482-0930
(610) 666-4000 Telefax (610) 666-1376
PRODUCT DATA SHEET Page #2
RUST VETO 4222-S

For most dipping applications, a dilution of 9 parts of water to 1 part of


Rust Veto 4222-S is recommended. For power spray washer
application, the maximum concentration should be 1 part to 20 parts
water.

TYPICAL PHYSICAL PROPERTIES

Appearance, Neat Clear, amber oil


Specific Gravity @ 60°F (15.5°C) .927
Viscosity @ 100°F, SUS 208
Viscosity @ 37.7°C, cSt 44.6
Flash Point, °F, COC 280F typical
Pour Point -16°F
Freeze Point -22F
Humidity Protection, 1010 Steel
treated with a 10% Emulsion 30 days typical

CONCENTRATION DETERMINATION (Rust Veto 4222-S Emulsions)

Apparatus and Reagents

50 ml pipet

Babcock bottle (Kimble 15066)

 1:1 dilution sulfuric acid

* When preparing 1:1 dilution of sulfuric acid, always add acid to


water slowly. Mixture will become hot. Handle with care.

* On a Babcock bottle each division equals .2 cc


PRODUCT DATA SHEET Page #3
RUST VETO 4222-S

Procedure

1. Pipet 50 ml of the emulsion into a Babcock bottle.


2. Add 1:1 dilution of sulfuric acid up to 80% mark.
3. Place bottle in oven at 140-150°F overnight.
4. Calculate the concentration of rust preventive.
% Concentration = cc of oil* x 2

INSTRUCTIONS FOR USE

Rust Veto 4222-S mixes easily with water. Upon addition of the
required amount of Rust Veto 4222-S to the water, a minimum of
mixing is required to form a white emulsion. The product's performance
is relatively unaffected by make-up water quality; either hard or soft
water may be used.

If an emulsion of Rust Veto 4222-S is left standing still for several days,
a layer of oil and/or cream may form on the surface. Any separated oil is
easily mixed back into the emulsion.

Emulsion of Rust Veto 4222-S remain stable when hot; to a maximum


temperature of 175°F.

SHIPPING INFORMATION

Rust Veto 4222-S is available in 55 U.S. gallon (208 liter) drums and in
bulk.

SHIPPING CLASSIFICATION

Petroleum Oil - NOS

SHELF LIFE

One (1) year


PRODUCT DATA SHEET Page #4
RUST VETO 4222-S

STORAGE/HANDLING/DISPOSABILITY

No health or safety hazards exist when Rust Veto 4222-S is stored, used
and disposed of in accordance with instructions given on the Material
Safety Data Sheet for this product.

WARRANTY

The information given here is considered to be correct and is offered for


your consideration, investigation and verification. No warranties are
expressed or implied, since the use of our products is beyond our
control. Statements concerning the use of Houghton products are not to
be construed as recommending the infringement of any patent.

EXPORT STATEMENT

This commodity and its technology are subject to the export control laws
and regulations of the United States Government. Buyer agrees that it
shall not make any disposition, by way of export, diversion,
transshipment, re-export or otherwise, except as expressly permitted
under United States law.

10/96

You might also like