SINGLE–GRIP HARVESTING HEADS

7000C
Log Max 7000C

For the really tough forest!

Log Max 7000C is a large head for the
really heavy timber. The head combines
high power and high speed, and performs
very well in heavy and branchy trunks.

Variable displacement feed roller motors

provide fast speed in smaller wood and
automatically regulate to provide more
power in tougher limbed trees. Well
placed guards and heavy covers protect
internal components and hoses from
damage.

High performance saw hydraulics provide

full flow to the bottom saw for fast cut-
ting in all timber sizes.

The Log Max patended knife control sys-

tem increases productivity by minimizing
feed friction. Unique compound curve de-
limbing knife profile provides outstanding
stem coverage and increased log quality.
1 2 3

21–35 tons 18–25 tons 200–300 kNm

Most productive range

1. Min delimbing diameter 3. Max cutting diameter, opt
2. Max cutting diameter, std

Dimensions Feeding Control system

Max width arms open ....................... 1950 mm Standard: Two hydraulically driven rollers Log Mate 402 with diameter and length measur-
Max width arms closed ..................... 1265 mm mounted directly on hub motors with a variable ing. Full system diagnostics and production
Height to upper rotator pin ................ 2095 mm displacement, 660–1320 cc. reporting. 8 species with 20 programmable
Option: Two hydraulically driven rollers mounted lengths per specie.
Weight directly on radial piston type motors. The motor
Standard configuration1 . ..................... 1681 kg is available in 1147 ccm. CabsWin is a Windows based control system
certified for using the StanForD standard. Be-
1)
Rotator, Steel rollers and damped protection Feed roller diameter, Steel ................... 612 mm cause it’s PC based, you can simply add a GPS
plate Feed roller diameter, V-Steel . .............. 612 mm or Internet connection to it.
Feed roller diameter, Rubber ................ 625 mm
Felling/Cutting Feed roller diameter, Eucalyptus ........... 616 mm Electrical system
Hydraulically driven chain saw with pressure Calculated feed force1 std/opt . .....42,1/36,3 kN Voltage ............................................. 24 Volts
controlled feed force. Chain oil tank in frame Calculated feed speed2 std/opt ..... 5,2/3,9 m/sec Amps ................................................10 Amp
with 36 litres capacity. Maximum roller opening ...................... 713 mm
Minimum roller opening ......................... 13 mm Rotator
Bottom saw: Indexator AV17S with 360˚ rotation
Saw type ................................ Saw 98B/98XL 1)
Calculated at 300 bar pressure Indexator H172 with 360˚ rotation
Saw motor ................................... 19 cc/20 cc 2)
Calculated at 300 l/min flow
Saw chain .................................... 0.404 pitch Optional equipment
Bar length, std/opt ..................75/80/82/90 cm Delimbing Automatic Chain Tensioner (Hultdins Supercut)
Max cut capacity, std/opt ........65/69/72/75 cm Four movable knives with patented positioning Eucalyptus Equipment
to minimize friction losses, which increases the Fixed protection plate
Optional saw: active pulling force. Field repair kit
Saw type ............................. Hultdins Supercut Color Marking
Saw motor ................................... 19 cc/20 cc Max delimbing knife opening ............... 772 mm Hydraulic upper knife
Saw chain .................................... 0.404 pitch Max full coverage delimbing diameter1 . . 560 mm Processor Knives
Bar length, std/opt ..................75/80/82/90 cm Min full coverage delimbing diameter ......40 mm Find end sensor
Max cut capacity, std/opt ........65/69/72/75 cm Snow Cover
1)
Note includes bottom knife Upper knife with wedge
Sound effect level
LWA .............................................. 110 dB(A)* Hydraulics Feed roller options
Maximum pressure ..............................300 bar Steel
* The value is measured according to EN ISO 3744:2009 with an
accuracy of ±2 dB (A) under publication EA-4/16:2003. The value Maximum flow . ............................... 300 l/min V-Steel
is measured when the saw cuts with maximum speed without Rubber
any load.
Min. requirements for acceptable performance: Eucalyptus
Flow . ............................................. 200 l/min
Issue MA 2010/001-JL

Log Max AB Tel:   +46 240-59 11 00

Stationsvägen 12 Fax: +46 240-59 11 10
S–770 13 Grangärde http://www.logmax.se
Sweden http://www.logmax.com © Log Max AB