Scribd
Upload
124 views

Mesh Analysis

The document provides instructions for 23 problems involving mesh and node analysis of circuits. For each problem, a circuit diagram is shown and students are asked to use either mesh or node analysis to solve for various current and voltage values. The problems cover determining branch currents, loop currents, mesh currents, node voltages, and voltages or currents through specific resistors.

Uploaded by

raovinayakm2
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
124 views

Mesh Analysis

The document provides instructions for 23 problems involving mesh and node analysis of circuits. For each problem, a circuit diagram is shown and students are asked to use either mesh or node analysis to solve for various current and voltage values. The problems cover determining branch currents, loop currents, mesh currents, node voltages, and voltages or currents through specific resistors.

Uploaded by

raovinayakm2
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

Mesh Analysis

1. In the circuit shown in Figure determine all branch currents and the voltage across the
5Ω resistor by loop current analysis.

2. In the circuit shown in Figure determine the mesh currents i1; i2; i3

3. In the circuit shown in Figure determine all branch currents by mesh current analysis.

4. In the circuit shown in Figure determine the current Ix

5. In the circuit shown in Figure determine all branch currents by mesh current analysis.

6. In the circuit shown in Figure determine all branch currents by mesh current analysis.
7. In the circuit shown in Figure determine the current I by mesh current analysis.

8. Find the loop currents i1; i2; i3 in the circuit shown in Figure

9. In the circuit shown in Figure determine the current through 2 Ω resistor.

10. In the circuit shown in Figure determine the current Ix

11. In the circuit shown in Figure determine the current Ix

12. In the circuit shown in Figure determine the current Ix


13. In the circuit shown in Figure determine all the loop currents

14. In the circuit shown in Figure determine the all the mesh currents

15. In the circuit shown in Figure determine the current Ix

16. Use loop analysis to find Vx in the circuit shown in Figure such that the current through
2+j3 Ω is zero.

17. Use loop analysis to find Vx in the circuit shown in Figure such that the current through
8+j8 Ω is zero.
18. Use mesh analysis determine the current I1; I2; I3 as shown in Figure

19. Using mesh analysis determine the current I1; I2; I3 shown in Figure

20. Determine the loop currents I1, I2, I3 and I4 for the network shown in Figure

21. Find the voltage across 20 Ω resistor in the network shown in Figure by mesh analysis.

22. Use mesh analysis to determine the three mesh currents i1; i2; i3 as shown in Figure
23. Using mesh current method find current through 10 Ω resistor in the network shown in
Figure

24. For the circuit shown in Figure find the power supplied 10 V source using mesh analysis.

25. Find the power delivered by the dependent voltage source in the circuit shown in Figure
by mesh analysis.

26. Use mesh analysis to determine the three mesh currents i1; i2; i3 also determine the
voltage drop across 2 Ω for the circuit shown in Figure

27. Use mesh analysis to determine the mesh currents i1; i2; i3; i4 for the circuit shown in
Figure
NODE Analysis
1. In the circuit shown in Figure determine all branch currents by node analysis.

2. In the circuit shown in Figure determine all branch currents and the voltage across the
5Ω resistor by node analysis.

3. In the circuit shown in Figure determine all branch currents and the voltage across the
5Ω resistor by node analysis.

4. In the circuit shown in Figure determine the current Ix


5. Find the loop currents i1; i2; i3 in the circuit shown in Figure

6. In the network shown in Figure find the node voltages using nodal analysis

7. In the network shown in Figure find the node voltages using nodal analysis

8. In the network shown in Figure find the current I by node voltage method.
9. In the network shown in Figure find the value of E2 such that current through the 8+j8 Ω
is zero.

10. In the network shown in Figure find the value of E2 such that current through the 2+j3 Ω
is zero.

11. In the network shown in Figure find the value of V2 using nodal analysis

12. In the circuit shown in Figure determine the node voltages


13. In the circuit shown in Figure determine the node voltages

14. In the circuit shown in Figure determine the node voltages

15. In the circuit shown in Figure determine the node voltages V1; V2; V3; V4
16. In the circuit shown in Figure determine the node voltages

17. In the circuit shown in Figure determine the node voltages and also current Io using
nodal analysis

18. In the circuit shown in Figure determine all the node voltages using nodal analysis

19. In the circuit shown in Figure determine all the node voltages using nodal analysis
20. In the circuit shown in Figure determine all the node voltages using nodal analysis

21.

22.

23.

You might also like