Scribd
Upload
14 views

Aliyyanmechatronics

Uploaded by

vaneeza ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
14 views

Aliyyanmechatronics

Uploaded by

vaneeza ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Name: Syed Aliyyan Imran Ali

Enrollment no:02-133202-028

Question 1

The sequence operation is:


1. Initially Cylinder A and C are in extended and Cylinder B is in retracted positions. When we press
the start button, valve1 pressed and valve 2 is switched to apply pressure to Cylinder A to extend.
When cylinder A fully extended and A+ limit switch operates. This switches valve5 and causes
pressure to valve6 and so apply pressure to Cylinder B to cause its piston to retract, from which limit
switch B- operates. This switches valve9 and causes pressure to valve10 and so apply pressure to
Cylinder C to cause its piston to extend, from which limit switch C+ operates. When the limit switch C+
operates, it switches valve3 and so caused pressure to valve4 and valve6 to switch it and so apply
pressure to Cylinder B again to cause its piston to extend. Cylinder B extends, releasing limit switch B-,
from which limit switch B+ operates. This switches valve7 and so caused pressure to valve8 and
valve10 to switch it and so apply pressure to Cylinder C again to cause its piston to retract.
Question 2

You might also like