Scribd
Upload
23 views

SOUDEUSES

The document describes three tube sealer models: the portable CR-6 and CR-6-PS models that run on batteries and the static desk CR-4 model. The CR-6 and CR-6-PS are lightweight and portable while the CR-4 is for static use. All three models are EMC tested and have adjustable sealing times and overcharge protection.

Uploaded by

Kader Smaili
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
23 views

SOUDEUSES

The document describes three tube sealer models: the portable CR-6 and CR-6-PS models that run on batteries and the static desk CR-4 model. The CR-6 and CR-6-PS are lightweight and portable while the CR-4 is for static use. All three models are EMC tested and have adjustable sealing times and overcharge protection.

Uploaded by

Kader Smaili
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Quality has a new name

Tube sealers

Model CR - 6

Portable
12 Volt
EMC tested
Electro-shock fuse
More than 1000 sealings per battery
Adjustable sealing time
Suitable for donation rooms,
laboratories and external use

Model CR - 6 - PS

Portable
12 Volt
EMC tested
Electro-shock fuse
More than 500 sealings per battery
Adjustable sealing time
Attractive price

Model CR - 4

Static desk version


115 / 230 Volt
EMC tested
Electro-shock fuse
Adjustable sealing time
Single or quadruple bench unit

Lmb Technologie GmbH


Möslstr. 17
D-85445 Schwaig
Tel: +49 - 8122 - 880 96 - 0
Fax:+49 - 8122 - 880 96 - 60
www.lmb.de
[email protected]
Quality has a new name

Tube sealers

Technical data CR - 6 - PS CR - 6

Weight 1,3 kg incl. batteries 3,1 kg incl. batteries


Dimensions 170x145x35 mm (incl. RF-outlet) 266x119x88 mm (incl. RF outlet)
Batteries 2 x 12V 2Ah
Internal fuse Overcharge protection type PTC, self-renewing
Effective consumption 120W maximum
Sealing time Adjustable from 0,5 to 5 seconds
Frequency 40,68 MHz crystal controled
Output power 90W/50 Ohm maximum
Operating temperature 10 - 40°C
Storage temperature -40 - +50°C
Operation Max. 1 sealing in 3 seconds during permanent use
Classification Electro-shock protection: Class 2 type B
Safety control number EN 60601-1 (EC601-1)
EMC control number EN 60601-1-2 (EC601-1-2)
Emission control number EN 55011 Group 2 class B

This device complies with MDD 93/42 EEC requirements.

Technical data CR 4

Weight 4,1 kg
Power supply 100/115/230/240 VAC 50/60 Hz
Internal fuse 2x T2,5 AL 250 V
Effective consumption 220 VA
Sealing time Adjustable from 0,5 to 5 seconds
Frequency 40,68 MHz crystal controled
Output power 90W/50 Ohm maximum
Dimensions 290 x 220 x 88 mm (incl. RF outlet)
Operating temperature 10 - 40°C
Storage temperature -40 - +50°C
During permanent use
Operation
1 sealing every 3 seconds
Classification Electro-shock protection: Class 2 type B
Safety control number EN 60601-1 (IEC601-1)
EMC control number EN 60601-1-2 (IEC601-1-2)
Emission control number EN 55011 Group 2 class B
Lmb Technologie GmbH
This device complies with MDD 93/42 EEC requirements. Möslstr. 17
D-85445 Schwaig
Tel: +49 - 8122 - 880 96 - 0
Fax:+49 - 8122 - 880 96 - 60
www.lmb.de
[email protected]

You might also like