Surface Mount

Switch MSW-2-20+
50W SPDT, Reflective DC4 to 2.0 GHz
Generic photo used for illustration purposes only
Maximum Ratings Features
Operating Temperature -40°C to 85°C • wideband, DC to 2.0 GHz CASE STYLE: XX211
• very fast switching, 4ns typ.
Storage Temperature -55°C to 100°C • low insertion loss, 0.5 dB typ. +RoHS Compliant
Input Power see Note 1 • low video leakage, 15 mVp-p typ. The +Suffix identifies RoHS Compliance. See our web site
Control Current see Note 2 for RoHS Compliance methodologies and qualifications
Permanent damage may occur if any of these limits are exceeded.
Applications
• cellular
and Reel
• PCN Available Tape cost
Pin Connections • 2-way radio at no extra
• receiver antenna switching Reel Size Devices/Reel
RF IN 1 7” 20, 50, 100, 200, 500, 1000
RF OUT 1 6 13” 2000
RF OUT 2 3
CONTROL 1 5
Electrical Specifications
CONTROL 2 4 FREQ.4 INSERTION LOSS 1dB COMPR. IN-OUT ISOLATION
(GHz) (dB) (dBm) (dB)
GROUND 2,7,8
DC-100 100-500 500-1000 1000-2000 DC-100 100-500 500-1000 1000-2000 DC-100 100-500 500-1000 1000-2000
MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz
fL fU Typ. Max. Typ. Max. Typ. Max. Typ. Max. Typ. Typ. Typ. Typ Typ. Min. Typ. Min. Typ. Min. Typ. Min
Outline Drawing DC 2.0 0.30 0.8 0.4 0.9 0.50 1.0 0.75 1.3 22 23 24 25 55 50 43 36 34 28 24 20

PCB Land Pattern

Additional Specifications CONTROL LOGIC

Control Voltage -8/0 for compression spec, -8 to -5/0 for all Control Ports RF outputs
other specs
1 2 1 2
Control Current, mA 0.2 max to -8V, 0.02 max at 0 to -0.2V
0 -V Off On
Suggested Layout,
Tolerance to be within ±.002 VSWR(:1) DC-1GHz 1-2GHz -V 0 On Off
1.2 typ. 1.4 typ.
Rise/Fall time (10%-90%), ns 4 typ.
Switching time, 50% of Control to
90% RF(Turn-on), ns 10 typ
10% RF(Turn-off), ns 4 typ
Outline Dimensions (inch
mm ) **Video Leakage, mVp-p 19 typ.
A B C D E F G 0/-5V Control
.163 .210 .077 .250 .220 .050 .017 ** Video leakage or break through is defined as leakage of switching signal to RF output ports.
4.14 5.33 1.96 6.35 5.59 1.27 0.43 1. RF Power Input(dBm), Max.DC-100MHz100-500MHz500-2000MHz
• Steady State Control 0/-8V 23 27 31
H J K M N P wt
• As a Modulator 11 17 21
.009 .025 .030 .050 .030 .270 grams
2. Control Current, 500µA (occurs at -9V to -12V typ)
0.23 0.64 0.76 1.27 0.76 6.86 0.10
3. OFF state of RF output is low impedance
4. All RF connections must be DC blocked or held at 0V DC.

Demo Board MCL P/N: TB-203

Suggested PCB Layout (PL-108)
Electrical Schematic

Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled REV. D
M151107
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp MSW-2-20+

Mini-Circuits
® WP/CP/AM
200810
Page 1 of 2
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
 MSW-2-20+
Typical Performance Data
FREQ. ON INSERTION LOSS (dB) OFF ISOLATION (dB) VSWR
(MHz) Control @ 0V/-5V) Control @ 0V/-5V)
IN-OUT RF IN RF OUT

RF IN-RF OUT RF IN-RF OUT RF OUT1-RF OUT2 (ON PORT)

0.3 0.52 81.93 93.30 1.10 1.11
1.0 0.52 97.26 97.90 1.10 1.10
100.0 0.56 59.31 73.94 1.07 1.07
200.0 0.57 53.23 64.89 1.07 1.07
300.0 0.57 49.47 58.85 1.07 1.07

400.0 0.57 46.44 53.61 1.07 1.07

500.0 0.58 44.05 50.36 1.07 1.06
600.0 0.58 41.90 47.22 1.07 1.06
700.0 0.58 39.98 44.58 1.07 1.06
800.0 0.58 38.20 42.30 1.07 1.07

900.0 0.58 36.54 40.21 1.06 1.08

1000.0 0.59 35.06 38.40 1.06 1.09
1100.0 0.59 33.66 36.75 1.05 1.10
1200.0 0.59 32.36 35.21 1.04 1.10
1400.0 0.61 29.98 32.49 1.04 1.11

1500.0 0.63 28.91 31.14 1.03 1.11

1600.0 0.66 28.12 29.80 1.03 1.11
1800.0 0.70 24.70 29.05 1.04 1.12
1900.0 0.66 22.96 26.48 1.06 1.12
2000.0 0.64 23.40 25.43 1.06 1.13

MSW-2-20+ MSW-2-20+
INSERTION LOSS at RF level of 0 dBm
ISOLATION
at RF level of 0 dBm 120
1.2
100 RF IN - RF OUT
INSERTION LOSS (dB)

ISOLATION (dB)

RF OUT1-RF OUT2
80
0.8
60

40
0.4
20

0
0.0 0 500 1000 1500 2000
0 500 1000 1500 2000
FREQUENCY (MHz)
FREQUENCY (MHz)

MSW-2-20+
VSWR
at RF level of 0 dBm
1.3
INPUT OUTPUT

1.2
VSWR

1.1

1.0
0 500 1000 1500 2000
FREQUENCY (MHz)

Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp

Mini-Circuits
®
Page 2 of 2
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]