

 HOME > Bogvik Daily

CH430 FLEXIFEED MANTLE

Time: 2021-07-01

CH430 FLEXIFEED MANTLE

BOGVIK's Flexifeed (FF) mantle - or moving liner - is engineered for your secondary crushing applications,
and offers up to a 20% longer lifetime compareed to a correctly configured standard chamber. Created for
crushed models CH420 to CH890i, it has a varying feed opening that is ideal if the crusher feed is not
calibrated.
You can use it with the following concaves: EC, C, and MC.

PREMIUM CHAMBER DESIGNS

BOGVIK offers an innovative range of premium chamber solutions that are created based on your needs,
and deliver consistently high availability and reliability. These innovative and patented solutions offer
significant productivity gains and safety improvements in your crushing operations, and improve your
bottom line.

AB Krossekonomi, a Swedish family run crushing business producing 5 million tonnes of aggregate a year for asphalt,
concrete and road construction, is trialing BOGVIK's new Flexifeed cone crusher.
"When BOGVIK showed us a drawing of the new mantle last year, I immediately knew this was a concept that we
needed to try," said Anders Mickelsson, production manager.
"Since installing the Flexifeed primary crusher six months ago we have increased production by approximately +10%
and the mantle lifespan by about +25%," said Mr Mickelsson.
AB Krossekonomi operator, Robert Farm said, "We've attained maximum production from day one right through to
the point where the mantles are completely worn out. The trial period was 1500 hours, but we've surpassed that
already and as far as we're concerned the Flexifeed is here to stay."
The Flexifeed mantle will be available throughout BOGVIK's global distribution network this year.

SANDVIK FlexiFeed Mantle

The innovative, patented and tested Flexifeed mantle has undeniable benefits:
Liner's lifetime extended by 20-50% depending on the application, thanks to optimized utilization
Increased reduction by about 5%
Maintained production levels throughout the mantle's lifetime
Maintained top size capability

Improved material flow and productivity is claimed with Sandvik's new crusher mantle design. The Sandvik Flexifeed
FF mantle features a patented design with a variable intake in the upper section and although the feed opening
is
narrower at some points in the intake, capacity is maintained. By extending the mantle Sandvik has ensured that
TOP
more crushing takes place in the upper section of the chamber. This improves utilisation and spreads the wear more
evenly throughout, extending the time between service intervals.

The mantle and pockets rotate during crushing, allowing large material through the chamber. According to the firm,
  
on-site testing has shown that the lifetime of liners can be extended by 20-50%, depending on the application, while
Home
the reduction ratio is increased by around 5%. ProductionTel levels are maintained throughout the E-mail
mantle's lifetime and
material gradation capabilities are maintained. At present, the Flexifeed mantle is only available for the Sandvik
CH440 cone crusher in combination with EC, C and MC concaves.

Near the top the contour has a varying feed opening - to match applications supplying varying
(uncalibrated) feed.
.
Compared to a correctly configured standard chamber, this feature can offer up to 20% longer lifetime –
why is this?
.
The intake is smaller in certain parts of the upper mantle circumference,
therefore a larger fraction of the feed is crushed earlier in the chamber.
.
It tends to reduce pressure peaks so you can close crusher a bit tighter before you max out;
.
And increases machine availability due to there less maintenance issues.
.
Ex: one customer went from 230 hours to 350 hours – just changing from B to a Flexifeed
*keep in mind saleable crushed tons on the ground is a better measure than hours
Works well in sand & gravel (BOGVIK has found some application in shot rock as well) because we tend to
select the chamber for the one biggest particle that will come in, and in sand & gravel we tend to not have
a lot of that; so it’s a pit with 8” minus stone where 90% of that is 0-4”. You have the odd rocks that
come in and it just swallows it.
Flexifeed has part standard mantle profile, for other half it gradually gets thicker and falls off at the other
end to go back to the center mantle and starts that process again. You have 2 wings that come around. If
you’re in sand & gravel with fine material you can achieve a lot more of the crushing in higher in the
chamber and utilize the entire surface of the entire chamber. So instead of just crushing down at the
bottom most of the time and using only this ½ of the concave mantle, you’re now using this full surface of
the concave mantle to crush that much more material.
When the wing comes around it pulls it right in; sucks it into the chamber.
Ex: One customer went from 400 hours M2 to 600 plus.
Evaluate it for any Sand & Gravel pit doing extra course, course, medium course.


TOP

  
Home Tel E-mail
 


TOP

  
Home Tel E-mail
 


TOP

  
Home Tel E-mail
 


TOP

  
Home Tel E-mail
 


TOP

  
Home Tel E-mail
 


TOP

  
Home Tel E-mail
 


TOP

  
Home Tel E-mail
 


TOP

  
Home Tel E-mail
 


TOP

  
Home Tel E-mail
 


TOP

  
Home Tel E-mail
 


TOP

  
Home Tel E-mail
 


TOP

  
Home Tel E-mail
 


TOP

  
Home Tel E-mail
 

QJ240,QJ241 - FIX JAW OPTI-TOOTH M2 BG00534749-02

QJ240,QJ241 - SWING JAW OPTI-TOOTH M2 BG00534750-02
QJ340,QJ341 - FIXED JAW OPTI-TOOTH M2 BG00534747-02
QJ340,QJ341 - SWING JAW OPTI-TOOTH M2 BG00534748-02
CJ412(JM1208) DEFLECTOR PLATE BG00541518
CJ613(JM1312) UPPER PLATE(HX900) BG00395192
CJ613(JM1312) LOWER PLATE(HX900) BG00395193
CJ613(JM1312) DEFLECTOR PLATE BG00643389 
TOP
MANTLE FLEXIFEED B BG00239982
MANTLE OPTIAGG S BG00280869
CONCAVE HIGH
REUDCTION  BG00227259 
MANTLE OVERSIZE
Home BREAKER Tel 452.4900-001 E-mail
CS430(S3800) EC2 SECOND LOWER BG00174250 BG00174251
CS430(S3800) EC2 SECOND LOWER 452.1952-901 452.1952-902 
CS430(S3800) C2 SECOND LOWER BG00174521 BG00174693
CS430(S3800) C2 SECOND LOWER 452.1954-901 452.1954-902
CS430(S3800) MC2 SECOND LOWER BG00174595 BG00174596
CS430(S3800) MC2 SECOND LOWER 452.1973-901 452.1973-902
CS440(S4800) EC2 SECOND LOWER 452.1955-901 452.1955-902
CS440(S4800) C2 SECOND LOWER 452.0945-901 452.0945-902
CS440(S4800) MC2 SECOND LOWER 452.1972-901 452.1972-902
CS440(S4800) ECC LOWER 452.1544-001 452-1544-002
CS440(S4800) MANTLE BC 452.1545-001 452.1545-002
CS550 EC UPPER 670.4004-001 670.4004-002
CS550 EC LOWER 670.4003-001 670.4003-002
CS550 C UPPER 670.4007-001 670.4007-002
CS550 C LOWER 670.4006-001 670.4006-002
CS550 MANTLE A 452.9000-001 452.9000-002
CS550 MANTLE B 452.9002-001 452.9002-002
CS550 MANTLE C 452.9001-001 452.9001-002
CS660 C2 SECOND LOWER BG01221422-01 BG01221422-02
CS660 CUSTOMIZED MANTLE BG01238109-01 BG01238109-02
CH420(H2000) MANTLE FF BG00143591-01 BG00143591-02
CH430(H3800) OPTIAGG L KIT MANTLE MC BG00391494 BG00391497
CH430(H3800) OPTIAGG L KIT MANTLE M BG000391499 BG00391502
CH430(H3800) OPTIAGG S KIT MANTLE MC BG00391493 BG00391496
CH430(H3800) OPTIAGG S KIT MANTLE M BG00391498 BG00391501
CH430(H3800) OPTIAGG S KIT MANTLE MF BG00391504 BG00391506
CH430(H3800) CUSTOMIZED EF CONCAVE 442.9349-001 442.9349-002
CH430(H3800) CUSTOMIZED B-MANTLE 442.9627-001 442.9627-002
CH440(H4800,H4000)MANTLE FF(A) 452.5271-001 452.5271-002
CH440(H4800,H4000)MANTLE FF(B) 452.6063-001 452.6063-002
CH440(H4800,H4000)OPTIAGG L KIT MANTLE MC BG00391543 BG00391545
CH440(H4800,H4000)OPTIAGG L KIT MANTLE M BG0091547 BG00391549
CH440(H4800,H4000)OPTIAGG L KIT MANTLE MF BG00391551 BG00391553
CH440(H4800,H4000)OPTIAGG L KIT MANTLE F BG00391555 BG00391557
CH440(H4800,H4000)OPTIAGG S KIT MANTLE MC BG00391542 BG00391544
CH440(H4800,H4000)OPTIAGG S KIT MANTLE M BG00391546 BG00391548

CH440(H4800,H4000)OPTIAGG S KIT MANTLE MF BG00391550 BG00391552 TOP
CH440(H4800,H4000)OPTIAGG S KIT MANTLE F BG00391554 BG00391556
CH440(H4800,H4000) CUSTOMIZED SHORT CONCAVE
  BG01223669-01 BG01223669-02

M
Home Tel E-mail
CH440(H4800,H4000) CUSTOMIZED SHORT CONCAVE 452.4883-001 452.4883-002
MF 
CH440(H4800,H4000) CUSTOMIZED F CONCAVE 452.2388-001 452.2388-002
CH440(H4800,H4000) CUSTOMIZED EF MANTLE 452.9209-001 452.9209-002
CH440(H4800,H4000) CUSTOMIZED EF MANTLE 452.3103-001 452.3103-002
CH440(H4800,H4000) CUSTOMIZED HC-MANTLE 452.9601-001 452.9601-002
CH540 CONCAVE EC TOP GRIP 452.8358-001 452.8358-002
CH540 MANTLE A 452.8432-001 452.8432-002
CH540 MANTLE B 452.8338-001 452.8338-002
CH540 CONCAVE C 452.8512-001 452.8512-002
CH540 FILLER RING C BG00247880 BG00247880
CH540 CONCAVE M 452.8513-001 452.8513-002
CH540 CONCAVE M BG00248423 BG00248423
CH540 CONCAVE F 452.8339-001 452.8339-002
CH540 CONCAVE EF 452.8511-001 452.8511-002
CH540 MANTLE EF 452.8510-001 452.8510-002
CH540 MANTLE FF 452.9030-001 452.9030-002
CH540 CH540 F-SHORT CONCAVE BG01222181-01 BG01222181-02
CH550 CONCAVE EC TOP GRIP 452.7843-001 452.7843-002
CH550 MANTLE A 452.7626-001 452.7626-002
CH550 MANTLE B 452.8602-001 452.8602-002
CH550 CONCAVE C 452.8500-001 452.8500-002
CH550 FILLER RING C 452.7388-001 452.7388-001
CH550 CONCAVE MC 452.8496-001 452.8496-002
CH550 CONCAVE M 452.8601-001 452.8601-002
CH550 FILLER RING M 452.7386-001 452.7386-001
CH550 CONCAVE F 452.8600-001 452.8600-002
CH550 MANTLE FF BG00133846-01 BG00133846-02
CH660(H6800) MANTLE FF 452.6027-001 452.6027-002
CH660(H6800) CONCAVE ECI BG00420396 BG00420397
CH660(H6800) CONCAVE CXI BG00420434 BG00420435
CH660(H6800) CONCAVE HR BG00417468-01 BG00417468-02
CH660(H6800) MANTLE HC 442.9760-01 442.9760-02
CH660(H6800) MANTLE OPTIAGG L KIT MC BG00391965 BG00391973
CH660(H6800) MANTLE OPTIAGG L KIT M BG00391976 BG00391978
CH660(H6800) MANTLE OPTIAGG L KIT MF BG00391980 BG00391983

CH660(H6800) MANTLE OPTIAGG S KIT MC BG00391958 BG00391971 TOP
CH660(H6800) MANTLE OPTIAGG S KIT M BG00391975 BG00391977
CH660(H6800) MANTLE OPTIAGG S KIT MF BG00391979 BG00391981
CH660(H6800) MANTLE OPTIAGG S KIT F  BG00391984 
BG00391987
Home Tel E-mail
CH660(H6800) CUSTOMIZED D-MANTLE 452.1543-001 452.1543-002
CH660(H6800) CUSTOMIZED B-MANTLE 452.1542-001 452.1542-002 
CH660(H6800) CUSTOMIZED EF-MANTLE 452.0455-001
CH660(H6800) CUSTOMIZED EF-MANTLE BG01236659-01 BG01236659-02
CH660(H6800) CUSTOMIZED EF-MANTLE BG01237520-01 BG01237520-02
CH660(H6800) CUSTOMIZED EF-CONCAVE BG01225329-01 BG01225329-02
CH660(H6800) CUSTOMIZED HC-CONCAVE 442.9990-01 442.9990-02
CH860I(CH860) CONCAVE EC TOP GRIP 452.8231-001 452.8231-002
CH860I(CH860) MANTLE A 452.8232-001 452.8232-002
CH860I(CH860) MANTLE B 452.8233-001 452.8233-002
CH860I(CH860) CONCAVE C 452.8238-001 452.8238-002
CH860I(CH860) CONCAVE MC 452.8239-001 452.8239-002
CH860I(CH860) FILLER RING 452.7883-001 452.7883-001
CH860I(CH860) CONCAVE M 452.8240-001 452.8240-002
CH860I(CH860) MANTLE FF 452.8243-001 452.8243-002
CH865I(CH865) CONCAVE F 452.8242-001 452.8242-002
CH865I(CH865) MANTLE EF 452.8236-001 452.8236-002
CH865I(CH865) CONCAVE EF 452.8235-001 452.8235-002
CH865I(CH865) MANTLE OB 452.8244-001 452.8244-002
CH865I(CH865) CONCAVE HR 452.8446-001 452.8446-002
CH870I(CH870) CONCAVE EC TOP GRIP BG00239713-01 BG00239713-02
CH870I(CH870) CONCAVE C 452.2255-001 452.2255-002
CH870I(CH870) MANTLE A 452.0837-001 452.0837-002
CH870I(CH870) MANTLE B 452.0872-001 452.0872-002
CH870I(CH870) FILLER RING EC 452.0891-901 452.0891-901
CH870I(CH870) FILLER RING C 452.2269-901 452.2269-901
CH870I(CH870) CONCAVE MC 452.2253-001 452.2253-002
CH870I(CH870) CONCAVE M 452.1754-001 452.1754-002
CH870I(CH870) FILLER RING M 452.0898-901 452.0898-901
CH870I(CH870) CONCAVE MF 452.0842-001 452.0842-002
CH870I(CH870) MANTLE EF 452-0844-001 452-0844-002
CH870I(CH870) FILLER RING EF 452.0899-901 452.0899-901
CH870I(CH870) CONCAVE F 452.0841-001 452.0841-002
CH870I(CH870) CONCAVE EF 452.0840-001 452.0840-002
CH870I(CH870) MANTLE EF 452.0845-001 452.0845-001
CH870I(CH870) MANTLE FF BG00239981-01 BG00239981-02

CH870I(CH870) MANTLE OB 452.4900-001 452.4900-002 TOP
CH870I(CH870) CONCAVE HR BG00401157-01 BG00401157-02
CH870I(CH870) MANTLE B BG00692006-01 BG00692006-02

CH890I(CH890,CH880,H8800) CONCAVE EC  442.9336-001 
442.9336-002
Home Tel E-mail
CH890I(CH890,CH880,H8800) MANTLE A 442.9314-001 442.9314-002
CH890I(CH890,CH880,H8800) MANTLE B 442.9339-001 442.9339-002 
CH890I(CH890,CH880,H8800) CONCAVE C 442.9398-001 442.9398-002
CH890I(CH890,CH880,H8800) CONCAVE MC 442.9471-001 442.9471-002
CH890I(CH890,CH880,H8800) MANTLE HC 442.9758-001 442.9758-002
CH890I(CH890,CH880,H8800) FILLER RING 442.9520-00 442.9520-00
CH890I(CH890,CH880,H8800) CONCAVE MC 442.9337-001 442.9337-002
CH890I(CH890,CH880,H8800) FILLER RING 442.9338-00 442.9338-00
CH890I(CH890,CH880,H8800) CONCAVE MF 442.9312-001 442.9312-002
CH890I(CH890,CH880,H8800) FILLER RING 442.9332-00 442.9332-00
CH890I(CH890,CH880,H8800) CONCAVE F 442.9471-001 442.9471-002
CH890I(CH890,CH880,H8800) MANTLE EF 452.0264-001 452.0264-002
CH890I(CH890,CH880,H8800) FILLER RING 452.9520-00 452.9520-00
CH890I(CH890,CH880,H8800) MANTLE FF BG00282784-01 BG00282784-02
CH890I(CH890,CH880,H8800) MANTLE OB 452.4051-001 452.4051-002
CH890I(CH890,CH880,H8800) CONCAVE EFX 452.1067-001 452.1067-002
CH890I(CH890,CH880,H8800) CONCAVE EF 452.0263-001 452.0263-002
CH890I(CH890,CH880,H8800) CONCAVE EEF 452.0579-001 452.0579-002
CH890I(CH890,CH880,H8800) CONCAVE HR BG00284338-01 BG00284338-02

CH870 452.0838 Concave EC

CH870 452.0842 Concave MF
CH871 452.0840 Concave
CH870 452.0845 Mantle EF
CH870 452.0872 Mantle B
CH870 452.1066 LINER
CH870 452.1065 Liner-Narrow arm
CH870 452.0918 Main Shaft
CH870 452.0919 Head Centre
CH880 442.9337 Concave
CH880 442.9339 Mantle B
CH880 442.9312 Concave
CH880 442.9314 Mantle A 
CH880 442.9340 Mantle TOP

CH880 442.9398 Concave

CH880  442.9471_  Concave 
CH880 Home 452.0264 Tel Mantle EF E-mail
CH880 452.0263 Concave EF

CH880 452.1067 Concave Efx 

CH880 452.4051 Concave
CH880 452.0328 Mainshaft
CH880 452.0314 Liner Narrow Arm As
CH880 452.0317 Liner Narrow Arm As
CH880 452.0320 Head Centre 1606-52
JM806 400.0474-001 Wide Teech, WT(Z) ST
JM806 400.0474-002 Wide Teech, WT(Z) ST
JM806 400.0465-001 Corrugated(C) ST
JM806 400.0465-002 Corrugated(C) ST
JM806 400.0464-001 Corrugated(C) SW
JM806 400.0464-002 Corrugated(C) SW
JM806 10.314.627.000 Cheek Plate Upper
JM806 10.314.628.000 Cheek Plate Lower
JM907 400.0483-001 Wide Teech, WT(Z) ST
JM907 400.0483-002 Wide Teech, WT(Z) ST
JM907 400.0417-001 Corrugated(C) ST
JM907 400.0417-002 Corrugated(C) ST
JM907 400.0418-001 Corrugated(C) SW
JM907 400.0418-002 Corrugated(C) SW
JM907 10.314.386.000 Cheek Plate Upper
JM907 10.314.404.000 Cheek Plate Lower
JM1107 400.1101-001 Jaw plate stationary
JM1107 400.1101-002 Jaw plate stationary
JM1107 400.1102-001 Jaw plate swing
JM1107 400.1102-002 Jaw plate swing
JM1107 400.0738-001 Jaw plate swing
JM1107 400.0738-002 Jaw plate swing
JM1107 400.0739-001 Jaw plate stationary
JM1107 400.0739-002 Jaw plate stationary
JM1107 400.2207-001 Jaw plate swing

JM1107 400.2207-002 Jaw plate swing TOP

JM1108 10.114.422.000 Wide Teech, WT(Z) ST

JM1108 400.0437-001 Coarse Corrugated(CC) ST
  
JM1108 400.0437-002 Coarse Corrugated(CC) ST
Home Tel E-mail
JM1108 400.0433-001 Coarse Corrugated(CC) SW
JM1108 400.0433-002 Coarse Corrugated(CC) SW 
JM1108 10.314.262.000 Cheek Plate Upper
JM1108 10.314.263.000 Cheek Plate Lower
JM1206 400.0484-001 Wide Teech, WT(Z) ST
JM1206 400.0484-002 Wide Teech, WT(Z) ST
JM1206 400.0415-001 Corrugated(C) ST
JM1206 400.0415-002 Corrugated(C) ST
JM1206 400.0414-001 Corrugated(C) SW
JM1206 400.0414-002 Corrugated(C) SW
JM1208 400.0411-001 Wide Teech, WT(Z) ST
JM1208 400.0411-002 Wide Teech, WT(Z) ST
JM1208 400.0425-001 Coarse Corrugated(CC) ST
JM1208 400.0425-002 Coarse Corrugated(CC) ST
JM1208 400.0420-001 Coarse Corrugated(CC) SW
JM1208 400.0420-002 Coarse Corrugated(CC) SW
JM1208 400.0412-001 Heavy Duty(HD) SW
JM1208 400.0412-002 Heavy Duty(HD) SW
JM1208 400.0413-001 Heavy Duty(HD) ST
JM1208 400.0413-002 Heavy Duty(HD) ST
JM1208 400.0420-001 Corrugated(CC) SW
JM1208 400.0420-002 Corrugated(CC) SW
JM1208 10.314.262.000 Cheek Plate Upper
JM1208 10.314.263.000 Cheek Plate Lower
1107RJ 400.0639-001 Cheek Plate
JM1211 400.2266-001 Coarse Corrugated(CC) ST
JM1211 400.2266-002 Coarse Corrugated(CC) ST
JM1211 400.0443-001 Coarse Corrugated(CC) SW
JM1211 400.0443-002 Coarse Corrugated(CC) SW
JM1211 400.0440-001 Wide Wave(WW),E ST
JM1211 400.0440-002 Wide Wave(WW),E ST
JM1211 400.0438-001 Wide Wave(WW),E SW

JM1211 400.0438-002 Wide Wave(WW),E SW
TOP
JM1211 402.4239-01 Cheek Plate Upper
JM1211 402.4635-01 Cheek Plate Lower
  
JM1312 400.0447-001 Corrugated(C) ST
Home Tel E-mail
JM1312 400.0447-002 Corrugated(C) ST
JM1312 400.0446-001 Corrugated(C) SW 
JM1312 400.0446-002 Corrugated(C) SW
JM1312 400.0422-001 Coarse Corrugated(CC) ST
JM1312 400.0422-002 Coarse Corrugated(CC) ST
JM1312 400.0421-001 Coarse Corrugated(CC) SW
JM1312 400.0421-002 Coarse Corrugated(CC) SW
JM1312 400.0963-001 Sharp Toothed(ST) ST
JM1312 400.0963-002 Sharp Toothed(ST) ST
JM1312 400.0964-001 Sharp Toothed(ST) SW
JM1312 400.0964-002 Sharp Toothed(ST) SW
JM1312 10.214.351.000 Cheek Plate Upper
JM1312 10.214.352.000 Cheek Plate Lower
JM1511 400.0488-001 Coarse Corrugated(CC) SW
JM1511 400.0488-002 Coarse Corrugated(CC) SW
JM1511 400.0490-001 Sharp Toothed(ST) ST
JM1511 400.0490-002 Sharp Toothed(ST) ST
JM1511 400.0491-001 Sharp Toothed(ST) SW
JM1511 400.0491-002 Sharp Toothed(ST) SW
JM1513 400.0779-001 Sharp Toothed(ST) ST
JM1513 400.0779-002 Sharp Toothed(ST) ST
JM1513 400.0780-001 Sharp Toothed(ST) SW
JM1513 400.0780-002 Sharp Toothed(ST) SW
CS430 442.8485 Cheek Plate
CS420 442.8550 Cheek Plate
CS430 442.8484 Cheek Plate
CS440 452.0274 Cheek Plate
CS440 442.8115 Cheek Plate
CS440 442.8099 Cheek Plate
CS430 442.8470 Concave
CS440 442.8114 Concave
CH420 442.9584 Concave
CS440 452.0273 Concave
CS440 442.8070 Concave
CS420 442.6789 Concave

S2800 442.8464 Concave TOP
CS440 442.8098 Concave
CS440 442.8089 Concave
CS430  442.8478  Concave 
Home Tel E-mail
CS430 442.8471 Concave
CS430 442.8477 Concave 
CS660 442.8982 Mantle A
CS660 442.8983 Mantle B
CS660 442.9071 Concave C
CS660 442.9072 Concave C
CS660 442.8981 Concave EC
CS660 442.8979 Concave EC
CS660 442.8975 Rim liner
PART
CATALOG DESCRIPTION
NUMBER
1005-0 442.9871-901 BOTTOM SHELL ASM H2800
1010-1 442.6174-01 PINSHFT ARM LINER S&H2800
1010-2 442.6175-01 NARROW ARM LINER S&H2800
1200-0 442.6131-01 BOTTOM SHELL BUSH S&H2800
1400-0 442.6132-01 DUST COLLAR S&H2800
1430-0 442.6216-01 GASKET S&H2800
1450-0 442.6146-01 INR DUST SEAL RING S&H2800
1540-5 899.0229-00 PROTECTIVE CAP SW55 2 G60SVART
1805-0 442.6183-01 ECCENTRIC H2800
1810-0 442.9657-01 ECC BUSH 13+16+18 H2800
1810-0 442.9658-01 ECC BUSH 18+20+22 H2800
1810-0 442.9659-01 ECC BUSH 22+25+28 H2800
1815-0 442.6152-01 HUB H&S2800
GEAR & PINION SET S&H2800 SPIRAL
1850-0 442.6127-00
BEV
1880-0 442.6130-01 WEARING PLATE S&H2800
1885-0 853.0619-00 SPRING PIN PRYM 12 X 40 S&H2800
2005-0 442.9872-01 HYDROSET CYLINER S&H2800
2050-0 442.9873-01 HYDROSET CYL BUSH S&H2800
2205-0 442.9655-00 PISTON H/S-2800
2260-0 442.6139-01 PISTON WRG PLATE S&H2800
2280-0 442.6137-01 STEP WASHER S&H2800
2305-0 442.6153-00 CHEVRON PACKING S&H2800
2400-0 442.6179-01 PACKING CLAMP PLT S&H2800
2560-0 442.8783-01 COVER PLATE CLOSURE PLUG

2605-0 984.0391-00 TRANSDUCER PROBE TOP
3000-0 442.6627-901 PINIONSHAFT ASM. H2800
3005-0 442.6134-01 PINIONSHAFT HOUSING S&H2800
3070-1 
868.0801-00  S&H2800
SPHERICAL ROLLER BEARING 
Home Tel E-mail
3070-2 868.0801-00 SPHERICAL ROLLER BEARING S&H2800
3090-1 442.6148-01 SPACER S&H2800 
3090-2 442.6148-01 SPACER S&H2800
3170-1 873.1012-00 OIL SEAL RING S&H2800
3305-0 900.0717-00 FILTER PLUG
3340-0 442.6202-01 PINSHAFT HSG PLUG S&H2800
3505-0 442.6133-01 PINIONSHAFT S&H2800
3515-0 857.0051-00 KEY R 18X11X70 S&H2800
3575-2 900.0269-00 NIPPLE RSK 124 16 45 S&H2800
3575-4 900.0275-00 SLEEVE 3/4" RSK S&H2800
4001-0 442.7591-901 MAINSHAFT SLV & DWL H2800
4005-0 442.7450-01 MAINSHAFT H2800
4025-0 442.6140-01 MAINSHAFT SLEEVE S&H2800
4035-0 853.0645-00 PARALLEL PIN M16X40 S&H2800
4075-0 442.6138-01 MAINSHAFT STEP S&H2800
4160-0 442.7449-01 HEADCENTER H2800
4175-0 442.7000-01 MANTLE EF M1 H2800
4175-0 442.7000-02 MANTLE EF M2 H2800
4175-0 442.9698-01 MANTLE A M1 H28800
4175-0 442.9698-02 MANTLE A M2 H2800
4175-0 442.6197-01 MANTLE B M1 H2800
4175-0 442.6197-02 MANTLE B M2 H2800
4175-0 442.9761-01 MANTLE HC M1 H2800
4175-0 442.9761-02 MANTLE HC M2 H2800
4205-0 442.6194-00 HEADNUT W/BURNING RING S&H2800
4205-1 442.6193-01 INNER HEAD NUT S&H2800
4205-2 442.6217-01 BURNING RING S&H2800
4305-0 442.6906-01 DUST SEAL RING S&H2800
4355-1 442.6932-01 SCRAPER S&H2800
5005-0 442.9674-901 TOP SHELL ASM H2800
5150-0 442.9568-01 SPIDER ARM SHIELD H2800
5650-0 442.8362-01 SPIDER CAP S&H2800
5651-0 873.0831-00 O-RING S&H2800
5675-0 442.8363-01 SPIDER BUSHING S&H2800
5705-0 442.8364-01 SPIDER BUSHING OIL SEAL S&H2800
6005-0 442.9583-01 CONCAVE RNG EF M1 H2800

6005-0 442.9583-02 CONCAVE RNG EF M2 H2800 TOP
6005-0 442.9584-01 CONCAVE RING F M1 H2800
6005-0 442.9584-02 CONCAVE RING F M2 H2800
6005-0 
442.9585-01 CONCAVE RING MF M1 
H2800 
Home Tel E-mail
6005-0 442.9585-02 CONCAVE RING MF M2 H2800
6005-0 442.9586-01 CONCAVE RING M M1 H2800 
6005-0 442.9586-02 CONCAVE RING M M2 H2800
6005-0 442.9587-01 CONCAVE RING C M1 H2800
6005-0 442.9587-02 CONCAVE RING C M2 H2800
6005-0 442.9569-01 CONCAVE RING EC M1 H2800
6005-0 442.9569-02 CONCAVE RNG EC M1 H2800
6006-0 442.9596-01 FILLER RING C(EF, F, MF, M) H2800
6020-0 840.1093-00 SCREW M65 20X280 8.8 H2800
6020-1 845.0203-00 LOCKNUT M20 8 H2800
6020-2 442.9572-01 SLEEVE H2800
6020-4 442.9573-01 WASHER H2800
6020-8 863.0065-00 DISC SPRING H2800
7150-0 442.1843-00 OIL SCREEN
7205-0 442.6614-00 A LUBE PUMPING UNIT S&H2800
7205-1 906.0140-00 OIL PUMP
906.0339-00 COMPLETE MOUNTING SET
7705-0 910.0101-00 AIR-OIL COOLER
7708-0 910.0111-00 FAN WHEEL 60HZ
7708-6 972.0359-00 MOTOR MT90L-4 3601 380/420VY
7720-0 912.0096-00 DIRT TRAP SW/0 1 1/4" 0,6MM 740010
7725-0 902.0717-00 RELIEF VALVE R1 3880901
7852-0 984.1008-00 LIQUID LEVEL SWITCH
8104-0 442.6956-00 A HYDROSET PUMP UNIT
8405-0 919.0163-00 ACCUMULATOR 10L
8405-0 919.0173-00 VALVE/PORT ASM
8525-0 442.8624-00 CHECK VALVE
8525-3 127.0004-30 CHECK VALVE SPRING
8825-0 984.0607-00 IMMERSION HEATER 1640W
8905-0 442.6644-01 FIXING PLATE LOWER H2800
8910-0 442.6643-00 TOP PLATE COMP MTG H2800
8915-0 864.0070-00 RUBBER COMPRESSION MOUNT H2800
PART
CATALOG DESCRIPTION
NUMBER
1005-0 442.7908-00 BOTTOM SHELL ASM S&H 3000
1010-1 442.7915-01 PINSHFT ARM LINER S&H3000

1010-2 442.7914-01 NARROW ARM LINER S&H3000 TOP
1200-0 442.7935-01 BOTTOM SHELL BUSH S&H3000
1400-0 442.7929-01 DUST COLLAR S&H3000
1430-0 
442.7934-01 GASKET S&H3000  
Home Tel E-mail
1450-0 442.7931-01 INR DUST SEAL RING S&H3000
1540-5 899.0229-00 PROTECTIVE CAP SW55 2 H20SVART 
1805-0 442.7921-01 ECCENTRIC H3000
1810-0 442.7923-01 ECC BUSH 16+19+22 H3000
1810-0 442.7924-01 ECC BUSH 22+25+29 H3000
1810-0 442.7925-01 ECC BUSH 29+32+34+36H3000
1815-0 442.7926-01 HUB H&S3000
GEAR & PINION SET S&H3000 SPIRAL
1850-0 442.7802-00
BEV
1880-0 442.7927-01 WEARING PLATE S&H3000
1885-0 853.0474-00 PIN PRYM 12 X 45 H3000
2005-0 442.7889-01 HYDROSET CYLINER S&H3000
2050-0 442.7892-01 HYDROSET CYL BUSH S&H3000
2205-0 442.9668-00 HYD PISTON ASM H/S-3000
2260-0 442.7893-01 PISTON WRG PLATE S&H3000
2280-0 442.7894-01 STEP WASHER S&H3000
2305-0 442.7897-00 CHEVRON PACKING
2400-0 442.7896-01 PACKING CLAMP PLT S&H3000
2560-0 442.8783-01 COVER PLATE CLOSURE PLUG H6000
TRANSDUCER PROBE H/S3800 4800
2605-0 984.0391-00
*NOTE*
2606-9 819.0061-00 PROTECTIVE HOSE SEE 819.0061
2630-0 442.7559-01 MEASURING TUBE H3000,4000
3005-0 442.7949-01 PINIONSHAFT HOUSING H3000
00-813-250-
3070-1 SPHERICAL ROLLER BEARING H3000
030
00-813-255-
3070-2 SPHERICAL ROLLER BEARING H3000
031
3090-2 442.7954-01 SPACER H3000
3170-1 873.1097-00 OIL SEAL RING CC H3000 OIL SEAL R
3305-0 900.0717-00 VENT FITTING 1/4 F14 H3000
3340-0 442.7959-01 PINSHAFT HSG PLUG H3000
3505-0 442.9936-01 PINIONSHAFT S&H3000
3515-0 857.0046-00 KEY R 16X10X80 H3000
3575-2 900.0269-00 NIPPLE RSK 124 16 45 DN 20
3575-4 900.0275-00 SLEEVE 3/4" RSK 1058 H3000

4001-0 442.8923-AD MAINSHAFT SLV & DWL H3000 TOP
4005-0 442.7902-01 MAINSHAFT
4025-0 442.7913-01 MAINSHAFT SLEEVE S&H3000
4035-0 
853.0118-00 
PARALLEL PIN H-36 M25X50 
Home Tel E-mail
4075-0 442.7895-01 MAINSHAFT STEP S&H3000
4160-0 442.7910-01 HEADCENTER H3000 
4175-0 442.7988-01 MANTLE A M1 H3800
4175-0 442.7988-02 MANTLE A M2 H3800
4175-0 442.7989-01 MANTLE B M1 H3800
4175-0 442.7989-02 MANTLE B M2 H3800
4175-0 442.8629-01 MANTLE EF M1 H3800
4175-0 442.8629-02 MANTLE EF M2 H3800
4205-0 442.7912-00 HEADNUT W/BURNING RING
4205-1 442.7918-01 INNER HEAD NUT S&H3000
4205-2 442.7911-01 BURNING RING S&H3000
4305-0 442.8017-01 DUST SEAL RING S&H3000
4355-1 442.8022-01 SCRAPER
5005-0 442.8314-901 TOP SHELL EC2 H3000
5150-0 442.7984-01 SPIDER ARM SHIELD H3000
5650-0 442.7976-01 SPIDER CAP H3000
5651-0 873.0833-00 O-RING 5.7 x 379.3 x 390.7
5675-0 442.6473-01 SPIDER BUSHING S&H3000
5705-0 442.6470-01 SPIDER BUSHING OIL SEAL H3800
6005-0 442.8003-01 CONCAVE RNG MF M1 H3800
6005-0 442.8003-02 CONCAVE RNG MF M2 H3800
6005-0 442.8246-01 CONCAVE RING M M1 H3800
6005-0 442.8246-02 CONCAVE RING M M2 H3800
6005-0 442.8247-01 CONCAVE RING MC M1 H3800
6005-0 442.8247-02 CONCAVE RING MC M2 H3800
6005-0 442.8248-01 CONCAVE RING C M1 H3800
6005-0 442.8248-02 CONCAVE RING C M2 H3800
6005-0 442.8249-01 CONCAVE RING EC M1 H3800
6005-0 442.8249-02 CONCAVE RING EC M2 H3800
6005-0 442.8251-01 CONCAVE RING F M1 H3800
6005-0 442.8630-01 CONCAVE RNG EF M1 H3800
6006-0 442.8008-01 FILLER RING M(F, MF)H3000
6006-0 442.8245-01 FILLER RING C(EF,MC) H3000
6020-0 442.8001-01 SCREW M65 24X360 8.8 H3000
6020-2 442.7996-01 SLEEVE H3000
6020-5 847.0264-00 WASHER H3000

6020-6 847.0265-00 WASHER H3000 TOP
6025-1 442.7999-01 LOCATING BAR H3000
6906-0 442.7986-90 CONICAL INSERT R.H. H3000 (EC)
6907-0 
442.7986-00  (EC)
CONICAL INSERT L.H. H3000 
Home Tel E-mail
7150-0 442.1843-00 OIL SCREEN
7205-0 442.3300-90 LUBE PUMPING UNIT S&H3000 
OIL PUMP RB5-01V 38-82874 PUMPING
7205-1 906.0140-00
UN
7205-2 930.0234-00 COUPLING HALF D25 05-32-116
7205-2 930.0235-00 COUPLING HALF D28 05-32-538
7705-0 442.2873-90 HEAT EXCHANGER 502-0-4BCFH2000
7705-0 910.0055-90 AIR-OIL COOLER 58-650-41-1.5
7708-0 906.0298-00 FAN WHEEL 60HZ FOR MK 001
7708-3 906.0307-00 IMPELLER BLADES-MK.001 H3000
7708-5 910.0063-00 RADIATOR UNIT
7708-6 972.0359-00 MOTOR MT90L-4 3601 380/420VY
7720-0 912.0096-00 DIRT TRAP SW/0 1 1/4" 0,6MM 740010
7725-0 902.0717-00 RELIEF VALVE R1 3880901
7852-0 984.1008-00 LIQUID LEVEL SWITCH
44-100-083- PIPE NIPPLE ADAPTER H3000 3.0 BSP
7906-3
001 TO
7960-1 900.0314-00 SLEEVE
8104-0 442.6956-00 HYDROSET PUMP UNIT H3000
8405-0 919.0164-00 ACCUMULATOR 20L OLAER H3000
8405-0 919.0173-00 VALVE/PORT ASM H3000 H4000
8525-0 442.8624-00 CHECK VALVE H3000/H4000
8525-3 127.0004-30 CHECK VALVE SPRING H4000
8555-0 650.0173-02 HYDRAULIC HOSE 2X695+5 H3000
8825-0 984.0316-00 IMMERSION HEATER 380V, 670W
8825-0 984.0607-00 IMMERSION HEATER 1640W S&H3000
8905-0 442.9780-01 BOTTOM PLT COMP MTG H8000
8910-0 442.9779-00 TOP PLATE COMP MTG H4000
STAMP "A" RUBBER COMPRESSION
8915-0 864.0080-00
MOUNT
8953-1 442.9476-00 TOOL BOX H&S 3000,4000 .
8953-4 442.0800-90 LEAD-CHECK OF C.S.S. S&H3000
8953-5 442.8044-01 EYEBOLT-LIFTING PLT S&H3000
8954-0 442.8042-00 LIFTING TOOL-ECC SLV S&H3000
8954-2 920.0109-00 SLUGGING WRENCH
8954-3 920.0131-00 COMBINATION WRENCH 46MM

8954-3 920.0134-00 COMBINATION WRENCH 30MM TOP
8954-3 920.0135-00 COMBINATION WRENCH 36MM
8954-4 920.0105-00 U-SPANNER NV 36MM 3000
8954-5 
920.0032-00 
SOCKET SCREW KEY 5/8" 
Home Tel E-mail
8954-5 920.0035-00 SOCKET SCREW KEY 5 H3000
8954-5 920.0036-00 SOCKET SCREW KEY 6 H3000 
8954-5 920.0037-00 SOCKET SCREW KEY 8 H3000
8954-5 920.0038-00 SOCKET SCREW KEY 10 MM
8954-5 920.0040-00 SOCKET SCREW KEY 14 H3000
8955-0 843.1330-00 STUD BOLT
8960-0 442.6566-00 PISTON STOP PLATE S&H3000
PART
CATALOG DESCRIPTION
NUMBER
1320-0 442.8866-01 BTMSHELL SIDE LINER S&H3000
1320-1 442.8865-01 BTMSHELL SIDE LINER S&H3000
1321-1 442.8868-01 BTMSHELL SIDE LINER S&H3000
1321-2 442.8869-01 BTMSHELL SIDE LINER S&H3000
1326-0 442.8867-01 BTMSHELL SIDE LINER S&H3000
1326-1 442.8864-01 BTMSHELL SIDE LINER S&H3000
1805-0 442.8449-01 ECCENTRIC S3000
1810-0 442.8486-01 ECC BUSH 16/20/25/30S3000
4001-0 452.0678-901 MAINSHAFT ASSEMBLY S3800
4005-0 452.0651-001 MAINSHAFT S3800
4025-0 442.7913-01 MAINSHAFT SLEEVE S&H3000
4160-0 452.0632-001 HEADCENTER S3800
4175-0 442.8470-01 MANTLE A M1 S3800
4175-0 442.8470-02 MANTLE A M2 S3800
4175-0 442.8471-01 MANTLE B M1 S3800
4175-0 442.8471-02 MANTLE B M2 S3800
5005-0 442.8446-01 TOPSHELL EC2 S3000
5110-0 442.9035-01 TOPSHELL LINER S3000
5112-0 853.0979-00 DOWEL PIN 36 X 32
5150-0 442.8451-01 ARM SHIELD S3000
DOWEL PIN-SPDR ARM SHLD
5155-0 442.8551-01
S3000
5650-0 442.8520-00 SPIDER CAP S3000
6305-0 442.8477-00 LWR CONCAVE EC M1 S3800
6305-0 442.8477-90 LWR CONCAVE EC M2 S3800
6305-0 442.8478-00 LWR CONCAVE C M1 S3800
6390-0 442.8478-90 LWR CONCAVE C M2 S3800

6390-0 442.8484-00 UPR CONCAVE EC M1 S3800 TOP
6390-0 442.8484-90 UPR CONCAVE EC M2 S3800
6390-0 442.8485-00 UPR CONCAVE C M1 S3800
6390-0 
442.8485-90 UPR CONCAVE C M2 
S3800 
Home Tel E-mail
Note: Balance of parts are common to both the H3800 and 
S3800
PART
DESCRIPTION
NUMBER
452.0230-902 BOTTOM SHELL
442.7201-00 BOTTOM SHELL COVER H4000
442.7140-00 PINSHAFT ARM LINER H4000
442.7141-00 NARROW ARM LINER H4000
442.7146-01 BOTTOM SHELL BUSH H4000
442.7106-01 DUST COLLAR H4000
442.7109-01 RING H4000
442.7110-01 LOCATING BAR H4000
442.7168-01 SHIM 0.1 THK(0.003) H4000
442.7168-02 SHIM 0.5 THK(0.02) H4000
442.7168-03 SHIM 0.7 THK(0.03) H4000
442.7168-04 SHIM 1.0 THK(0.04) H4000
442.7170-01 DUST COLLAR GASKET H4000
442.7108-01 INNER SEAL RING H4000
923.0351-00 TEMPERATURE TRANSMITTER
899.0278-00 PROTECTIVE CAP M42 SW65-2-G68
442.9530-01 SCREW M6S 42X100 8.8 S&H4000
442.7151-01 ECCENTRIC H4000
442.9406-01 ECC BUSHING 32-36-40-44 H4000
442.9642-01 ECC BSHG 24-28-32 H4000
442.9643-01 ECC BSG 13-16-20-24 H4000
442.7142-01 HUB H&S4000
442.7169-00 RING S&H4000
442.9609-01 KEY R 25X14X250 S&H4000
GEAR & PINION SET S&H4000 SPIRAL
442.7093-00
BVL
442.7171-01 ECC GEAR KEY H4000
442.7107-01 WEARING PLATE-ECC H4000
853.0646-00 PIN PRYM N 16 X 45 H4000
442.7163-01 HYDROSET CYLINDER H4000
442.7166-01 HYDROSET CYL BUSH H4000

873.0892-00 O-RING 530 X 7 SMS 1587 H4000 TOP
442.9672-00 HYD PISTON ASM H/S4000
442.7122-01 PISTON WEARING PLT H4000
442.7121-01 
STEP WASHER H4000  
Home Tel E-mail
442.7112-00 CHEVRON PACKING-HYD H4000
442.7167-01 PACKING CLAMP PLATE H4000 
442.9663-00 HYDROSET CYL COVER H4000
442.7202-01 HYD CYL COVER GASKT H4000
873.1276-00 O-RING
442.9966-901 PINIONSHAFT ASSEMBLY H4800
442.7506-01 PINIONSHAFT HSG S&H4000
442.7136-01 PINSHAFT HSG GASKET S&H4000
442.7136-02 PINSHAFT HSG GASKET S&H4000
442.7136-03 PINSHAFT HSG GASKET S&H4000
868.0282-00 SPHER ROLLR BEARING H4000
868.0804-00 SPHER ROLLR BEARING H4000
442.7130-01 PINION END SPACER S&H4000
442.7131-01 SHEAVE END SPACER S&H4000
873.1208-00 OILSEAL RING BASL H4000 OILSEAL RI
PINSHAFT SEAL PLT S&H4000 PINION
442.9684-01
END
442.7133-01 PINSHAFT SEAL PLATE H4000
442.7134-01 PINSHAFT SEALPLT GASKET H4000
442.7135-01 PINSHAFT SEALPLT GASKET H4000
442.7135-02 PINSHAFT SEALPLT GASKET H4000
853.0590-00 SPRING PIN PRYM N 8X28 H4000
442.9937-01 PINIONSHAFT H&S4000
857.0337-00 KEY T 22X14X95 SMS 2307 H4000
857.0336-00 KEY T 28X16X110 SMS 2307 H4000
900.0022-00 ELBOW 3/4 A4 127 1345, BLACK
900.2026-00 MAGNETIC PLUG 3/4 S&H6000
873.0385-00 SEALING RING TREDO 20
442.7577-01 OIL LEVEL PLUG H4000
873.0108-00 O-RING 3.0X 34.2X 40.2
442.7578-01 PIPE-PINION END S&H4000 .
442.8703-00 PINIONSHFT PUMP ASM 460V, 60HZ
906.0367-00 PUMP P3-AAN-0, 75-FL-20-B0 1
906.0366-00 SPACER
930.0248-00 COUPLING
906.0365-00 FOOT FLANGE

923.0193-00 PRESSURE GAUGE 2748 GLYC D 63 TOP
912.0129-00 FILTER CARTRIDGE PC 507
442.7238-01 WASHER-SHEAVE RETAINER H4000
442.7259-901 
MAINSHAFT ASSM H4000  
Home Tel E-mail
442.7100-01 MAINSHAFT H4000
442.7117-01 MAINSHAFT SLEEVE H4000 
853.0119-00 PARALLEL PIN
442.7120-01 MAINSHAFT STEP H4000
442.8332-01 HEAD CENTER H4000
442.7225-01 MANTLE A M1 H4800
442.7225-02 MANTLE A M2 H4800
442.7230-01 MANTLE B M1 H4800
442.7230-02 MANTLE B M2 H4800
442.8039-01 MANTLE EF M1 H4800
442.9073-03 MANTLE HC M7 H4800
442.7105-00 head nut with burning ring
442.8333-01 HEADNUT-INNER S & H4000
442.7115-01 BURNING RING S&H4000
442.7102-01 DUST SEAL RING H4000
442.7103-01 RETAINER RING H4000
442.7523-01 DUST SEAL RETAINER H4000
442.7524-01 SCRAPER H4000
442.7180-00 TOPSHELL 2-ARM H4000
442.7190-01 SPIDER ARM SHIELD H4000
900.0425-00 PIPE COUPLING
808.0220-00 STEEL PIPE 10 X 1,5 MM H4000
442.7492-01 SPIDER CAP H4000
912.0114-00 AIR FILTER PI0102 R1/4" + INS
900.0169-00 NIPPLE 1/4 N8 131 6314, BLACK
900.0002-00 ELBOW 1/4 A1 127 0016, BLACK
873.0838-00 O-RING 5.7X499.3X510.7
442.9408-01 SPIDER BUSHING S&H4000
442.7193-01 OIL SEAL RING-SPIDR H4000
900.0981-00 PLUG KR1 INSEX ZN 10 H3000, H4000 &
442.8416-01 CONCAVE RNG EF M1 H4800
442.8417-01 CONCAVE RING F M1 H4800
442.8417-02 CONCAVE RING F M2 H4800
442.8417-03 CONCAVE RING F M7
442.8418-01 CONCAVE RNG MF M1 H4800
442.8418-02 CONCAVE RNG MF M2 H4800

442.8419-01 CONCAVE RING M M1 H4800 TOP
442.8419-02 CONCAVE RING M M2 H4800
442.8420-01 CONCAVE RNG MC M1 H4800
442.8420-02 
CONCAVE RNG MC M2 H4800  
Home Tel E-mail
442.8421-01 CONCAVE RING C M1 H4800
442.8421-02 CONCAVE RING C M2 H4800 
442.8422-01 CONCAVE RNG EC M1 H4800
442.8422-02 CONCAVE RNG EC M2 H4800
442.7484-01 FILLER RING (F, MF) H4000
442.7485-01 FILLER RING EF,M,MC H4000
900.1821-00 PIPE 1-1/4 X 165 KREA SMS 1787
442.7251-02 WASHER-CONCAVE 80X30X140 H4000
442.7251-03 CONCAVE WASHER H4000
442.7252-01 SHIM 1X80X20 1142-32 H4000
442.7252-02 SHIM 3X80X20 1312-00 H4000
442.7252-03 SHIM 5X80X20 1312-00 H4000
442.7252-04 SHIM 10X80X20 1312-00 H6000
442.8687-01 SCREW M6S 30X360 8.8 H4000
442.7253-01 SLEEVE H4000 .
442.7271-01 CONCAVE SUPT WASHER H4000
863.0058-00 DISC SPRING 90X46X5 H4000
442.8425-01 CONCAVE CLAMP RING H4000
442.8290-01 DOWEL PIN H4000
442.7267-90 FEED SPLITTER ASM LH H4000
442.7267-00 FEED SPLITTER ASM RH H4000
442.7191-00 FEED HOPPER ASM H4000
914.0170-00 OIL LEVEL INDICATOR H4000 10" LG
442.8345-01 HYDRAULIC PIPE
902.0746-00 VALVE HRSF-3/4R 200KPA H4000
912.0127-00 PRESS DROP INDIC PIS3097/2,2
912.0116-00 AIR FILTER PI0121 H4000
923.0192-00 THERMOMETER IFC60 0-120 L100
930.0237-00 COUPLING HALF D38 05-32-540
906.0142-00 MECHANICAL SEAL 3884087 H6000
912.0126-00 FILTER CARTRIDGE PC230
442.2873-91 HEAT EXCHANGER BCF 602-0-4
910.0102-00 AIR-OIL COOLER-STD H4000
900.0160-00 BUSHING 2.00 X 1.50
906.0390-00 COMPLETE FAN-(6 BLADE FAN)
910.0112-00 AXIAL FAN H4000 (4-BLADES)

906.0309-00 IMPELLER BLADES-MK.002 H4000 TOP
906.0387-00 FAN BLADE
910.0067-00 COOLER CORE IE-2927
972.0531-00 
MOTOR, M2AA112M-4 3601 400VY 
Home Tel E-mail
912.0087-00 DIRT TRAP SW/0 1 1/2-0

902.0723-00
RELIEF VALVE DN32 0,7MPA 474122P 
H4
442.1774-00 FLOW SWITCH ASM H4000
930.0205-00 COUPLING HE 14 H4000 PUMPING UN
930.0252-00 COUPLING ND 8
843.1445-00 STUD SCREW
906.0270-00 PUMP P3BAN2004 HL10B02
906.0377-00 HYDROSET PUMP
972.0182-00 MOTOR MT90L-2 2,2KW 220-380V
906.0268-00 PUMP BRACKET BL 7SL PUMPING UNIT
906.0376-00 PUMPBRACKET
906.0269-00 FOOT BRACKET P200 PUMPING UNIT
919.0165-00 ACCUMULATOR 25L OLAER H4000
919.0171-00 BLADDER COMPLETE 25L H4800
919.0184-00 BLADDER COMPLETE H4000
442.1954-01 ACCUMULATOR CLAMP H4000
442.8215-00 ACCUMULATOR CHARGING KIT
900.0659-00 ADAPTER R2.0 X R2
442.6406-01 VALVE GUIDE BODY H4000
442.6402-01 CHK VALVE FLG FACE H3000
442.6403-01 VALVE H4000
442.6508-00 CONNECTION PIECE
900.0655-00 ADAPTER R3/4 X R3/4 702-12-12
ACCUM PIPE PROTECTOR H4000 (SET-
442.8179-00
L+R)
912.0128-00 FILTER BASE
PRESSURE GAUGE M20-2 0-6MPA
923.0379-00
6"DIA
IMMERSION HEATER OE3SB9/3-1650
984.0530-00
440V
984.0605-00 IMM HTR 440V,2190W S&H4000
912.0138-00 AIR FILTER PI0154 MIC
912.0139-00 FILTER CARTRIDGE
912.0113-00 AIR FILTER 504-2S 5 MICRON
902.0645-00 AIR REGULATOR 216-2-8

923.0267-00 PRESSURE GAUGE TOP
STAMP "B" RUBBER COMPRESSION
864.0046-00
MOUNT
899.0099-00 
LIFTING EYE BOLT  
Home Tel E-mail
442.0800-91 LEAD-CHECK OF C.S.S. H4000
442.7282-01 EYEBOLT-LIFTING PLATE S&H4000 
442.7283-00 LIFTING TOOL-ECC SLV S&H4000
442.7281-00 LIFTING TOOL-BTMSHL BSGS&H4000
442.8043-00 LIFTING TOOL-BTMSHL BSGS&H4000
920.0110-00 SLUGGING WRENCH
920.0151-00 SLUGGING WRENCH
442.7284-00 LOWERING ROD W/NUTS S&H4000
843.1333-00 STUD BOLT
442.7280-00 PISTON STOP PLATE S&H4000
PART
CATALOG DESCRIPTION
NUMBER
1320-0 442.8794-01 BTMSHELL SIDE LINER S4000
1321-1 442.8796-01 BTMSHELL SIDE LINER S4000
1321-2 442.8797-01 BTMSHELL SIDE LINER S4000
1322-0 442.8798-01 BTMSHELL SIDE LINER S4000
1326-0 442.8795-01 BTMSHELL SIDE LINER S4000
1805-0 442.8068-01 ECCENTRIC S4000
ECC BUSH 20-25-30-36
1810-0 442.8067-01
S4000
MAINSHAFT SLV & DWL
4001-0 442.8092-901
S4000
4160-0 442.8063-01 HEADCENTER S4000
4175-0 442.8070-01 MANTLE B M1 S4800
4175-0 442.8070-02 MANTLE B M2 S4800
4175-0 442.8089-01 MANTLE A M1 S4800
4175-0 442.8089-02 MANTLE A M2 S4800
5005-0 442.8059-01 TOPSHELL EC2 S4000
5110-0 442.9036-01 TOPSHELL LINER
5150-0 442.8075-01 ARM SHEILD ASM S4000
5155-0 442.8077-01 FIXING PIN S4000
5155-1 442.8078-01 BUMPER S4000
5155-2 442.8079-01 BUMPER S4000
5275-0 442.8090-01 BRACKET-ADAPTER S4000
5650-0 442.9164-00 SPIDER CAP S4000
LWR CONCAVE C M1
6305-0 442.8098-00 
S4800 TOP
LWR CONCAVE C M2
6305-0 442.8098-90
S4800
6305-0 
442.8114-00 LWR CONCAVE EC M1  
Home Tel E-mail
 S4800

6305-0 442.8114-90
LWR CONCAVE EC M2 
S4800
LWR CONCAVE MC M1
6305-0 452.0273-901
S4800
LWR CONCAVE MC M2
6305-0 452.0273-902
S4800
6390-0 442.8099-00 UPR CONCAVE C M1 S4800
6390-0 442.8099-90 UPR CONCAVE C M2 S4800
UPR CONCAVE EC M1
6390-0 442.8115-00
S4800
UPR CONCAVE EC M2
6390-0 442.8115-90
S4800
6390-0 452.0274-901 UPR CONCAVE MC M1 S4800
6390-0 452.0274-902 UPR CONCAVE MC M2 S4800
6900-0 442.8105-00 FEED HOPPER S4000
HYDRAULIC HOSE GUARD
8553-0 442.8645-00
S4000
KEY-WOODEN WEDGE
8950-9 442.1561-01
S4000
PART
DESCRIPTION
NUMBER
442.8735-00 BOTTOM SHELL ASM S&H6000
442.8760-00 PINIONSHAFT ARM LNR H6000
442.8759-00 NARROW ARM LINER S&H6000
900.2108-00 ELBOW 4" A4 SMS 435
442.8742-01 BOTTOM SHELL BUSH S&H6000
900.0921-00 TEE CPLG 3/4 SA 4072,415 H6000
900.1412-00 PIPE 3/4 X 70 KREA SMS 1787
442.8741-01 DUST COLLAR S&H6000
442.8762-01 LOCATING BAR S&H6000
442.8809-01 SHIM 0.1 THK(0.003) S&H6000
442.8809-02 SHIM 0.5 THK(0.02) S&H6000
442.8809-03 SHIM 0.7 THK(0.03) S&H6000
442.8809-04 SHIM 1.0 THK(0.04) S&H6000
DUST COLLAR GASKT S&H6000 (2-
442.8808-01 
PIECE) TOP
442.8747-01 INNER SEAL RING S&H6000
442.8733-01 ECCENTRIC H6000
442.8824-01 
ECC BUSH 18+20+24+28 H6000  
Home Tel E-mail
442.8825-01 ECC BUSH 28+32+36+40 H6000
442.8826-01 ECC BUSH 40+44+48+50 H6000 
442.8743-00 RING (TWO PIECE) S&H6000
GEAR & PINION SET H6000(SOLD AS
442.8723-00
SET)
442.8807-01 ECC GEAR KEY S&H6000
442.8761-01 WEARING PLATE-ECC H6000
442.8722-01 HYDROSET CYLINDER S&H6000
442.8724-01 HYDROSET CYL BUSH H6000
873.1152-00 O-RING 625 X7 SMS1587 H6000
442.8758-00 PISTON S&H6000
442.8730-01 PISTON WRG PLATE S&H6000
442.8731-01 STEP WASHER S&H6000
442.8739-00 CHEVRON PACKING S&H6000
442.8726-01 HYDROSET CYL COVER H6000
873.1153-00 O-RING 510 X5,7 SMS1587 H6000
HYD CYL COVER GASKT H6000 HYD CYL
442.8749-01
CO
442.8783-01 COVER PLATE CLOSURE PLUG H6000
984.0623-00 TRANSDUCER PROBE H/S 6000
442.8847-901 PINIONSHAFT ASSY (LESS PINION)
442.8764-01 PINIONSHAFT HSG S&H6000
442.8803-01 PINSHAFT HSG GASKET S&H6000
442.8803-02 PINSHAFT HSG GASKET S&H6000
442.8803-03 PINSHAFT HSG GASKET S&H6000
868.0799-00 SPHERICAL ROLLER BEARING H6000
868.0806-00 SPHER ROLLER BEARNG H6000
442.8771-01 SPACER-SHV&PIN ENDS& H6000
873.1161-00 OIL SEAL RING CC H6000 OIL SEAL R
442.8766-01 PINSHAFT SEAL PLT S&H6000
442.8765-01 PINSHAFT SEAL PLT S&H6000
442.8775-01 PINSHAFT SEALPLT GASKET H6000
442.8774-01 PINSHAFT SEALPLT GASKET H6000
442.8774-02 PINSHAFT SEALPLT GASKET H6000
442.8772-01 PINIONSHAFT S&H6000
857.0350-00 KEY T 25X14X95 SMS 2307 H6000

442.8778-01 OIL LEVEL PLUG S&H6000 TOP
442.8787-01 WASHER-SHEAVE RETAINER H6000
442.8788-01 SPACER-SHEAVE RETAINER H6000
442.8848-901 
MAINSHAFT ASM H6000  
Home Tel E-mail
442.8767-01 MAINSHAFT H6000
442.8792-01 MAINSHAFT SLEEVE H6000 
853.0119-00 PARALLEL PIN
442.8732-01 MAINSHAFT STEP S&H6000
442.8763-01 HEADCENTER H6000
442.8819-01 MANTLE A M1 H6800
442.8819-02 MANTLE A M2 H6800
442.8820-01 MANTLE B M1 H6800
442.8820-02 MANTLE B M2 H6800
442.8821-01 MANTLE D M1 H6800
442.8821-02 MANTLE D M2 H6800
442.9355-01 MANTLE EF M1 H6800
452.0820-001 MANTLE H6000 EEF M1
452.0820-002 MANTLE EEF M2 H6800
442.8800-00 HEADNUT W/BURN RING H6000
442.8791-01 INNER HEAD NUT H6000 **SEE I-NOTE*
442.6427-01 BURNING RING S&H6000
442.8802-01 DUST SEAL RING S&H6000
442.8801-01 RETAINER RING S&H6000
442.8804-01 DUST SEAL RETAINER H6000
442.8805-01 SCRAPER S&H6000
442.8849-901 TOPSHELL EC2
442.8812-01 SPIDER ARM SHIELD H6000
900.0243-00 SCRENED SOCKET
442.8753-01 SPIDER CAP H6000
873.1160-00 O-RING 529,3X5,7 SMS1587 H6000
442.8754-01 SPIDER BUSHING S&H6000
442.8755-01 OIL SEAL RING S&H6000
442.8813-01 CONCAVE RNG EC M1 H6800
442.8813-02 CONCAVE RNG EC M2 H6800
442.8814-01 CONCAVE RING C M1 H6800
442.8814-02 CONCAVE RING C M2 H6800
442.8815-01 CONCAVE RNG MC M1 H6800
442.8815-02 CONCAVE RNG MC M2 H6800
442.8816-01 CONCAVE RING M M1 H6800
442.8816-02 CONCAVE RING M M2 H6800

442.8817-01 CONCAVE RNG MF M1 H6800 TOP
442.8817-02 CONCAVE RNG MF M2 H6800
442.8818-01 CONCAVE RING F M1 H6800
442.8818-02 
CONCAVE RING F M2 H6800  
Home Tel E-mail
442.9356-01 CONCAVE RNG EF M1 H6800
442.9356-02 CONCAVE RNG EF M2 H6800 
452.0832-001 CONCAVE H6000 EEF M1
452.0832-002 CONCAVE EEF M2 H6800
442.8823-01 FILLER RING (M & MC) H6000
442.8863-01 FILLER RING (F, MF) H6000
442.8881-01 WASHER-CONCAVE H6000
442.7252-01 SHIM 1X80X20 1142-32 H4000
442.7252-02 SHIM 3X80X20 1312-00 H4000
442.7252-03 SHIM 5X80X20 1312-00 H4000
442.7252-04 SHIM 10X80X20 1312-00 H6000
442.8908-01 HOSE H6000
442.9415-00 WEAR PLATE
863.0058-00 DISC SPRING 90X46X5 H4000
442.8793-01 CONCAVE CLAMPING RING H6000
MOTOR MBT112M 1800RPM 6HP LUBE
972.0532-00
H6800
843.1267-00 STUD SCREW 12X45 5,8 S&H6000
BLADDER COMPLETE 20L
919.0170-00
H3800/H6800
ACCUMULATOR ASM H6000 FOR
919.0174-00
BLADDE
442.8777-00 CHECK VALVE
900.2026-00 MAGNETIC PLUG 3/4 S&H6000
442.5904-01 FIXING PLATE H6000& H8000
442.9781-00 TOP PLATE COMP MTGH&S6000
442.8879-00 LIFTING TOOL/ECC SL H6000
442.8880-00 LIFTING TOOL/BTM SHELL
843.1511-00 STUD BOLT
PART
CATALOG DESCRIPTION
NUMBER
1320-0 442.9042-01 ACCESS HOLE SIDE LNR 6000
1322-0 442.9043-01 BSHELL SIDE LINER H/S6000
1324-0 442.9040-01 PINION ARM SIDE LINR 6000
1326-0 442.9041-01 NARROW ARM SIDE LNR 6000
1805-0 442.8973-01 ECCENTRIC S6000

1810-0 442.9033-01 ECC BSHG 20-25-30-35-40 S6000 TOP
MAINSHAFT ASY W/O MANTLE
4001-0 452.1700-901
S6800
4005-0 
442.8971-01 MAINSHAFT S6000  
Home Tel E-mail
4025-0 442.8792-01 MAINSHAFT SLEEVE H6000
4160-0 442.8974-01 HEADCENTER S6000 
4175-0 442.8982-01 MANTLE A M1 S6800
4175-0 442.8982-02 MANTLE A M2 S6800
4175-0 442.8983-01 MANTLE B M1 S6800
4355-1 442.8805-01 SCRAPER S&H6000
5005-0 442.8970-01 TOPSHELL S6000
5110-0 442.8975-01 RIM LINER S6000
5150-0 442.8976-01 SPIDER ARM SHIELD S6800
5605-0 442.8969-00 SPIDER S6000
5660-0 442.8977-01 SPIDER CAP S6000
5675-0 442.8754-01 SPIDER BUSHING S&H6000
LOWER CONCAVE RING C M2
6304-0 442.9071-90
S6800
6305-0 442.8979-00 CONCAVE LWR EC M1 S6800
6305-0 442.9071-00 CONCAVE LWR C M1 S6800
6395-0 442.8981-00 CONCAVE UPR EC M1 S6800
6395-0 442.9072-00 CONCAVE UPR C M1 S6800
CONCAVE RING-UPR C M2
6395-0 442.9072-90
S6800
PART
DESCRIPTION
NUMBER
452.0317-901 PINIONSHAFT ARM LINERS H8800
452.0314-901 NARROW ARM LINER H8800
442.9396-00 BEND-ELBOW H8000
900.2199-00 FLANGE, PARTED SAE3000 4"
873.0129-00 O-RING 3.0X109.4X115.5
442.9248-01 BOTTOMSHELL BUSHING H8000
442.9539-01 WEARING PLATE H8000
442.9539-02 WEARING PLATE H8000
442.9540-01 WEARING PLATE H8000
442.9541-01 WEARING PLATE H8000
442.9541-02 WEARING PLATE H8000
442.9542-01 WEARING PLATE H8000
442.9542-02 WEARING PLATE H8000
452.0313-901 BOTTOMSHELL LINERS H8800

442.9307-01 DUST COLLAR H8000 TOP
442.9309-01 RING H8000
442.9308-02 LOCATING BAR H8000
442.9362-01 
SHIM 0,1 THK(0.003) H8000  
Home Tel E-mail
442.9362-02 SHIM 0,5 THK(0.02) H8000
442.9362-03 SHIM 0,7 THK(0.03) H8000 
442.9362-04 SHIM 1,0 THK(0.04) H8000
841.0256-00 CAPSCREW HEXSOC M10-1.50X 50
442.9363-01 DUST COLLAR GASKET H8000
442.9310-01 INNER SEAL RING H8000
847.0063-00 WASHER ZINC 10 X 26 X 65
442.9530-02 SCREW M6S 42X140 8.8 H8000
442.9245-01 ECCENTRIC H8000
442.9357-01 ECC BSHG 24/28/32/36 H8000
442.9358-01 ECC BSHG 36/40/44/48 H8000
442.9359-01 ECC BSHG 48/52/56/60 H8000
442.9360-01 ECC BSHG 60/64/68/70 H8000
442.9246-01 HUB H8000
442.9274-00 RING H8000
442.9469-01 KEY R 32X18X360 H8000
847.0181-00 SPRING WASHER M16 X 17X30
GEAR & PINION SET H8000 SPIRAL
442.9311-00
BEV
442.9275-01 ECCENTRIC GEAR KEY H8000
442.9249-02 ECC WEARING PLATE H8000
853.0646-00 PIN PRYM N 16 X 45 H4000
442.9253-01 HYDROSET CYLINDER H8000
442.9980-01 HYDROSET CYLINDER H8800
442.9256-01 HYDROSET CYL BUSH H8000
873.1211-00 O-RING SEE 873.1211
442.9743-00 HYDROSET PISTON ASM H8000
853.0988-00 PARALLEL PIN
442.9724-01 PISTON WEARING PLT H-8000
442.9722-01 STEP WASHER H-8000
442.9257-00 CHEVRON PACKING H8000
442.9304-01 PACKING CLAMP PLATE H8000
442.9255-00 HYDROSET CYL COVER H8000
873.1233-00 O-RING
873.1210-00 O-RING
442.9815-901 PINIONSHAFT ASSM

442.9258-01 PINIONSHAFT HOUSING H8000 TOP
442.9806-01 PINION SHAFT HOUSING H8800
442.9364-01 PINSHAFT HSG GASKET H8000 0,5 THK
442.9364-02 
PINSHAFT HSG GASKET H8000 0,8 
THK 
Home Tel E-mail
442.9364-03 PINSHAFT HSG GASKET H8000 1,5 THK
868.0832-00 SPHERICAL ROLLER BEARING H8800 
00-813-252-
SPHERICAL ROLLER BEARING H8000
007
868.0832-00 SPHERICAL ROLLER BEARING H8800
00-813-250-
SPHERICAL ROLLER BEARING H8000
076
442.9334-01 PIN& SHV END SPACER H8000
442.9808-01 SPACER H8800
873.1219-00 SEAL RING
442.9261-01 PINSHAFT SEAL PL H8000 PINION END
442.9260-01 PINSHAFT SEAL PL H8000 SHEAVE END
442.9365-01 PINSHAFT SEALPLT GASKET H8000
442.9366-01 PINSHAFT SEALPLT GASKET H8000
442.9366-02 PINSHAFT SEALPLT GASKET H8000
853.0590-00 SPRING PIN PRYM N 8X28 H4000
442.9259-01 PINIONSHAFT H8000
442.9807-01 PINION SHAFT H8800
857.0353-00 KEY
857.0354-00 KEY
842.0020-00 SCREW
442.9346-01 OIL LEVEL PLUG H8000
442.9342-01 WASHER-SHEAVE RETAINER H8000
442.9343-01 SPACER H8000
442.9732-AD MAINSHAFT ASM H8000
452.9998-901 MAINSHAFT ASSEMBLY H8800
442.9294-01 MAINSHAFT SLEEVE H8000
853.0988-00 PARALLEL PIN
442.9723-01 MAINSHAFT STEP H-8000
442.9314-01 MANTLE A M1 H8800
442.9339-01 MANTLE B M1 H8800
442.9340-01 MANTLE EF M1 H8800 **I-NOTE**
442.9270-00 HEADNUT W/BURN RING H8000
442.9269-01 INNER HEADNUT H8000
442.9306-01 BURNING RING H8000
442.9271-01 DUST SEAL RING H8000

442.9272-01 RETAINING RING H8000 TOP
442.9367-01 SCRAPER RETAINER H8000
442.9368-01 SCRAPER H8000
442.9265-00 
SPIDER ARM 
SHIELD H8000 *I-NOTE* 
Home Tel E-mail
452.0266-001 SPIDER CAP H8800
873.1232-00 O-RING- 790,0 X 5,7 SMS 1586 
442.9266-01 SPIDER BUSH ALL THS H8000
191.2376-00 TEMPERATURE TRANSMITTER
452.0418-001 OIL SEAL RING/SCRAPER H8800
452.0417-001 RING H8800
452.0419-001 SUPPORT RING
442.9312-01 CONCAVE RNG MF M1 H8800
442.9336-01 CONCAVE RING EC M1 H8800
442.9337-01 CONCAVE RING M M1 H8800
442.9398-01 CONCAVE RING C M1 H8800
442.9471-01 CONCAVE RNG MC M1 H8800
442.9520-00 FILLER RING MC H8000
442.9352-01 WASHER H8000
452.1068-001 WASHER H8800
840.1136-00 SCREW
442.9353-01 SLEEVE H8000
442.9354-01 WASHER H8000
863.0015-00 DISC SPRING
442.9313-01 SUPPORT RING H8000
442.9521-00 SPLITTER RH H8000
442.9521-90 SPLITTER LH H8000
906.0412-00 MECHANICAL SEAL 3884087
910.0104-00 AIR-OIL COOLER-STD H8000
442.9485-08 ROD 1312 SQ 12 L=80 H8000
442.9485-09 ROUND BAR L=100 H8000
442.9490-01 HYDRAULIC HOSE R1" X 2100
442.9491-01 HYDRAULIC HOSE R3/4" X 2700
65-735-791- CONVERSION ADAPTER 0.50BSPP MALE
001 -0
65-735-791- CONVERSION ADAPTER 1.00BSPP MALE
002 -1
902.0061-00 VALVE 1/4" FT 110 H8000
902.0761-00 SHUT-OFF VALVE 7640-3/8" H8000
PART
CATALOG DESCRIPTION
NUMBER

10-314-628- TOP
1103-0 LOWER SIDE LINER 806
000
10-314-627-
1103-1 UPPER SIDE LINER 806
000 
Home Tel E-mail
1205-0 10-314-630- SUPPORT BAR 806 2306-0
000 
1208-0 400.0465-001 STAT JAW PL CORRUG M1
1208-0 400.0465-002 STAT JAW PL CORRUG M2
10-314-625-
1209-0 WEDGE 806 2310-0
000
53-468-022-
1300-0 PROTECTION PLATE 806 2300-0
000
53-267-931-
2010-0 SHAFT ECCENTRIC 806
000
00-813-249- SPHERICAL ROLLER BEARING
2012-0
006 CYLINDRICAL
10-314-513- SW JAW COUNTER FLANGE 806 SWING
2014-0
000 JAW
10-314-512-
2015-0 SWING JAW SEAL PLATE 907
000
10-314-514-
2100-0 COUNTER FLANGE INNER BRG 907
000
10-314-515-
2101-0 FRAME OUTER COVER 907
000
00-923-203-
2102-0 SEAL V-RING D255 X 25 907
225
00-813-249-
2104-0 SPHERICAL ROLLER BEARING TAPERED
005
00-819-163-
2105-0 ADAPTER SLEEVE AH2344H
244
10-314-516-
2106-0 FRAME OUTER LABYRINTH 907
000
59-425-417-
2207-0 KEY 25 X 45 X 120
009
53-467-374-
2215-0 SPACER RING 907
000
2309-0 400.0464-001 SWING JAW PL CORRUG M1
2309-0 400.0464-002 SWING JAW PL CORRUG M2
10-314-626-
2316-0 DEFLECTOR PLATE
000

10-314-624- TOP
5003-0 TOGGLE SEAT BLOCK
000
10-314-632-
5004-0 TOGGLE SEAT
000  
Home Tel E-mail
5006-0 10-314-634- TOGGLE PLATE 806
000 
53-467-395-
7003-1 TENSION ROD CLEVIS 907
500
53-466-415-
7003-9 THREADED ROD 907
004
7004-0 127.0006-12 SPRING, TENSION ROD 907
53-367-366-
7005-0 TENSION ROD WASHER 907
500
53-267-383-
9909-1 LEFT BEARING HOUSING 907
500
10-214-509-
9909-2 RIGHT BEARING HOUSING 907
500
PART
CATALOG DESCRIPTION
NUMBER
10-314-404-
1103-0 LOWER SIDE LINER 907, 1206
000
10-314-386-
1103-1 UPPER SIDE LINER-CAST 907, 1206
000
10-314-481-
1205-0 WEDGE PLATE 907
000
1206-0 400.0314-002 BOLT M20X160
1207-0 845.0010-00 HEX NUT-ZINC M20-2.50
1207-1 847.0132-00 WASHER ZINC M20 3X21X36
1208-0 400.0418-002 STAT JAW PL CG M2
10-314-429-
1209-0 WEDGE SWING JAW 907
000
00-920-144-
1210-0 WEDGE BOLT ZINC
909
53-467-117-
1300-0 PROTECTION PLATE 907
000
53-267-115-
2010-0 SHAFT-ECCENTRIC 907
000
00-813-249- SPHERICAL ROLLER BEARING
2012-0
006 CYLINDRICAL
10-314-513- SW JAW COUNTER FLANGE 806 SWING
2014-0 
000 JAW TOP
10-314-512-
2015-0 SWING JAW SEAL PLATE 907
000
2100-0 
10-314-514- COUNTER FLANGE INNERBRG 907 
Home Tel E-mail
 000

2101-0
10-314-515-
FRAME OUTER COVER 907

000
00-923-203-
2102-0 SEAL V-RING D255 X 25 907
225
00-813-249-
2104-0 SPHERICAL ROLLER BEARING TAPERED
005
00-819-163-
2105-0 ADAPTER SLEEVE AH2344H
244
10-314-516-
2106-0 FRAME OUTER LABYRINTH 907
000
59-425-417-
2207-0 KEY 25 X 45 X 120
009
53-467-374-
2215-0 SPACER RING 907
000
53-467-117-
2300-0 PROTECTION PLATE 907
000
10-314-481-
2306-0 WEDGE PLATE 907
000
2309-0 400.0417-002 SWING JAW PLATE CRG M2
10-314-429-
2310-0 WEDGE SWING JAW 907
000
10-314-479-
2316-0 DEFLECTOR PLATE 907
000
10-314-517-
5003-0 TOGGLE SEAT BLOCK 907
000
89-242-876-
5004-0 TOGGLE SEAT 907
000
89-242-877-
5006-0 TOGGLE PLATE 907
000
53-368-317-
6000-0 HYDRAULIC JACK ASM 5 TON
501
53-467-395-
7003-1 TENSION ROD CLEVIS 907
500
53-466-415-
7003-9 THREADED ROD 907
004

7004-0 127.0006-12 SPRING, TENSION ROD 907 TOP
53-367-366-
7005-0 TENSION ROD WASHER 907
500
9909-1 
53-267-383- 907
LEFT BEARING HOUSING 
Home Tel E-mail
 500

9909-2
10-214-509-
RIGHT BEARING HOUSING 907

500

400.0483 WT Jaw plate

PART
CATALOG DESCRIPTION
NUMBER
10-314-263-
1103-0 SIDE LINER-LWR (CAST) 1108/1208
000
10-314-262-
1103-1 SIDE LINER-UPPER (CAST) 1108/1208
000
10-214-269-
1205-0 WEDGE PLATE 1108, 1208
000
1206-0 400.0314-003 SQUARE BOLT M20X180
1207-0 845.0010-00 HEX NUT-ZINC M20-2.50
65-651-001-
1207-1 WASHER 3 X 21X 37
015
STATIONARY JAW PL CORRUG M2
1208-0 400.0410-002
1108
STAT/SWING JAW PLATE WT(Z) M1
1208-0 400.0436-001
1108
STAT JAW PL COARSE CORRUG M1
1208-0 400.0437-001
1108
10-314-385-
1209-0 WEDGE - SWING JAW 1108
000
00-920-144-
1210-0 WEDGE BOLT ZINC
909
53-267-444-
2010-0 ECCENTRIC SHAFT 1108
000
00-813-249-
2012-0 SPHER. BRG 24606CC/W33/C3
004
10-214-414-
2014-0 SW JAW COUNTR FLANGE 1108
000
10-214-388-
2015-0 SWING JAW FLANGE1108/1206
000
10-214-415-
2100-0 COUNTERFLANGE INNER 1108 
000 TOP
10-214-416-
2101-0 FRAME OUTER COVER 1108
000
2102-0 
873.1327-00 SEAL V-RING  
Home Tel E-mail
2102-1 873.0910-00 SEAL V-RING

2104-0
00-813-249-
SPHER BRG 23152 CK/W33/C3

003
00-819-163-
2105-0 ADAPTER SLEEVE AH3152 .
352
10-214-417-
2106-0 FRAME OUTR LABERYNTH 1108
000
00-819-137-
2107-0 LOCKWASHER-BEARING MB - 44
244
00-819-121-
2108-0 LOCKNUT-BEARING NO-HM44T
044
53-467-327-
2215-0 SPACER RING 1108
000
00-930-920-
2216-0 BEARING LOCKNUT KM32 1108
033
53-466-783-
2300-0 PROTECTION PLATE
000
10-214-269-
2306-0 WEDGE PLATE 1108/1208
000
2309-0 400.0409-002 SWING JAW PLATE CORRUG M2 1108
SWING JAW PL COARSE CORRUG M1
2309-0 400.0433-001
1108
10-314-385-
2310-0 WEDGE - SWING JAW 1108
000
59-942-843-
2311-0 SCREW M33 x 880
001
10-214-384-
2316-0 DEFLECTOR PLATE 1108
000
10-314-522-
5003-0 TOGGLE SEAT BLOCK 1108
000
89-242-895-
5004-0 TOGGLE SEAT 1108
000
89-242-894-
5006-0 TOGGLE PLATE 1108
000
53-368-317-
6000-0 HYDRAULIC JACK ASM 5 TON
501

53-366-774- TOP
6004-0 HYDRAULIC CYL ROD 1108
500
53-466-668-
7003-1 TENSION ROD CLEVIS 1208
500  
Home Tel E-mail
7003-9 53-466-415- THREADED ROD 1208
001 
17-202-779-
7004-0 SPRING, TENSION ROD 1208/1108
001
53-166-775-
9909-1 LEFT BEARING HSG1108/1206
500
10-114-387-
9909-2 RIGHT BRG HSG 1108/1206
500
53-473-796-
9910-0 BOLT
003
PART
CATALOG DESCRIPTION
NUMBER
10-314-404-
1103-0 LOWER SIDE LINER 1206
000
10-314-386-
1103-1 UPPER SIDE LINER-CAST 1206
000
10-214-269-
1205-0 WEDGE PLATE 1108/1208
000
1206-0 400.0314-003 SQUARE BOLT M20X180
STATIONARY JAW PL CORRUG M2
1208-0 400.0415-002
1206
10-314-246-
1209-0 WEDGE STA JAW 1206/1208
000
00-920-144-
1210-0 WEDGE BOLT ZINC
909
53-266-909-
2010-0 ECCENTRIC SHAFT 1206
000
00-813-249- SPHER. BRG 24606CC/W33/C3
2012-0
004 SPHERICAL
2102-0 873.1327-00 SEAL V-RING
2102-1 873.0910-00 SEAL V-RING
00-813-249- SPHER BRG 23152 CK/W33/C3
2104-0
003 SPHERICAL
00-819-163-
2105-0 ADAPTER SLEEVE AH3152 .
352
10-214-417-
2106-0 FRAME OUTR LABERYNTH 1108 
000 TOP
00-819-137-
2107-0 LOCKWASHER-BEARING MB - 44
244
2108-0 
00-819-121- 
LOCKNUT-BEARING NO-HM44T 
Home Tel E-mail
 044

2300-0
53-466-918-
PROTECTION PLATE 1206

000
SWING JAW PLATE CORRUG M2
2309-0 400.0414-002
1206
10-314-246-
2310-0 WEDGE STA JAW 1206/1208
000
10-214-255-
2316-0 DEFLECTOR PLATE 1206/1208
000
10-314-425-
5003-0 TOGGLE SEAT BLOCK 1206
000
89-242-707-
5004-0 TOGGLE SEAT 1206
000
10-214-523-
5006-0 TOGGLE PLATE 1208
000
53-467-347-
5016-0 SHIM 907/1206
000
53-368-317-
6000-0 HYDRAULIC JACK ASM 5 TON
501
53-466-668-
7003-1 TENSION ROD CLEVIS 1208
500
53-466-415-
7003-9 THREADED ROD 1206
003
17-202-779-
7004-0 SPRING, TENSION ROD 1208/1108
001
7004-0 400.0450-001 SPRING TENSION ROD
53-166-775-
9909-1 LEFT BEARING HSG1108/1206
500
10-114-387-
9909-2 RIGHT BRG HSG 1108/1206
500
PART
CATALOG DESCRIPTION
NUMBER
10-314-263-
1103-0 SIDE LINER-LWR (CAST)1208 SIDE LINER
000
10-314-262-
1103-1 SIDE LINER-UPPER (CAST) 1208
000

10-214-269- TOP
1205-0 WEDGE PLATE 1208
000
1206-0 400.0314-002 BOLT M20X160
1208-0 
400.0408-002  M2
STATIONARY JAW PL CORRUG 
Home Tel E-mail
 1208

1208-0 400.0411-001
STAT/SWING JAW PLATE WT(Z) M1 
1208
STATIONARY JAW PLATE HD M2
1208-0 400.0413-002
1208
STAT JAW PL CORRUG COARSE M1
1208-0 400.0425-001
1208
10-314-246-
1209-0 WEDGE STA JAW 1206/1208
000
53-466-463-
1300-0 PROTECTION PLATE 1208
000
53-266-357-
2010-0 ECCENTRIC SHAFT 1208
000
53-267-179-
2010-0 ECCENTRIC SHAFT 1208/1211
000
00-813-249- SPHERICAL ROLLER BEARING
2012-0
002 CYLINDRICAL
2014-0 402.7388-01 SPACING COLLAR-LABYR 1211/1208
2015-0 402.7389-00 LABYRINTH COVER & PLUGS 1211
32-402-739-
2100-0 SPACER,INR LABYRINTH 1208
101
32-402-739-
2101-0 SEALPLATE,INNER LABY 1208
001
00-923-203-
2102-0 SEAL V RING
315
00-813-249-
2104-0 SPHERICAL ROLLER BEARING
001
00-819-163-
2105-0 ADAPTER SLEEVE AH3164H *i-note*
364
2106-0 402.7392-01 LABYRINTH RING-OUTER 1211
00-819-137-
2107-0 LOCKWASHER-BEARING MB- 56
256
00-930-920- BEARING LOCKNUT TR280X4
2108-0
056 1208/1211/
00-920-241-
2307-0 SCREW M20X200
105

10-114-743- TOP
2309-0 SWING JAW PL 1208 **I-NOTE**
000
SWING JAW PLATE CORRUG M2
2309-0 400.0407-002
 1208  
Home Tel E-mail
2309-0 400.0420-001 SWING JAW PL COARSE CORRUG M1
1208 
10-214-255-
2316-0 DEFLECTOR PLATE 1206/1208
000
53-467-202-
2317-0 SAFETY KEY
000
10-314-265-
5003-0 TOGGLE SEAT BLOCK 1208
000
10-314-495-
5003-0 TOGGLE SEAT BLOCK 1208
000
17-201-650-
5004-0 TOGGLE SEAT
001
10-214-523-
5006-0 TOGGLE PLATE 1208
000
53-466-668-
7003-1 TENSION ROD CLEVIS 1208
500
53-466-415-
7003-9 THREADED ROD 1208
001
17-202-779-
7004-0 SPRING, TENSION ROD 1208/1108
001
53-366-376-
7005-0 WASHER,TENSION ROD 1208
500
53-366-379-
7007-0 PUSHER PLATE- 1108/1206/1208
500
10-114-256-
9909-1 BEARING HSG MACH LH 1208
502
10-114-256-
9909-2 BEARING HSG MACH RH 1208
501
53-466-431-
9910-0 STUD
001
PART
CATALOG DESCRIPTION
NUMBER
1103-1 402.4239-01 SIDE LINER, UPPER 1211
1103-2 402.4635-01 CHEEK PLATE LOWER
1205-0 402.4258-00 JAW PLATE SUPT STRIP 1211
STAT JAW PL COARSE CORRUG M1
1208-0 400.0444-001 
1211 TOP
STAT JAW PL COARSE CORRUG M2
1208-0 400.0444-002
1211
1208-1 
400.0426-001 STAT JAW PLATE HD M1 
1211 
Home Tel E-mail
1208-2 400.0427-001 STAT JAW PLT MIDDLE 1211
1210-0 402.4570-00 TENSIONING STRIP 
53-267-179-
2010-0 ECCENTRIC SHAFT 1208/1211
000
00-813-250-
2012-0 SPHERICAL ROLLER BEARING 1211
086
2102-0 873.1025-00 V-RING
00-813-249-
2104-0 SPHERICAL ROLLER BEARING
001
00-819-163-
2105-0 ADAPTER SLEEVE AH3164H
364
SWING JAW PL COARSE CORRUG M1
2309-0 400.0443-001
1211
SWING JAW PL COARSE CORRUG M2
2309-0 400.0443-002
1211
2309-0 400.0423-001 SWING JAW PLATE- HD 1211
2309-1 402.2043-01 SW JAW PLATE-MIDDLE 1211
3400-0 402.2320-00 TENSIONING STRIP 1211
5003-0 402.4270-01 TOGGLE SEAT HOLDER 1211
5006-0 402.4607-01 TOGGLE PLATE
7001-0 402.4303-00 RETRACTION BAR L1340 1211
7001-0 402.4303-91 RETRACTION BAR L=1500
7003-0 127.0006-27 SPRING,TENSION ROD 1211

400.044
400.0442
400.0438
400.4039
400.0422
400.0421
PART
CATALOG DESCRIPTION
NUMBER
10-214-352-
1103-0 LOWER SIDE LINER 1312
000
10-214-351-
1103-1 UPPER SIDE LINER 1312
000

10-314-356- TOP
1205-0 WEDGE PLATE 1312
000
1208-0 400.0445-001 STAT/SWING JAW PL WT(Z) M1 1312
1208-0 
400.0447-001  M1 1312
STAT JAW PL CORRUGATED 
Home Tel E-mail
1208-0 400.0963-001 STAT JAW PL SHARP TOOTHED M1

1209-0
10-214-355-
WEDGE-SWING JAW 1312

000
53-366-632-
1221-0 SCREW TAPERED HEAD 1312
501
53-466-616-
1300-0 PROTECTION PLATE
000
53-267-239-
2010-0 ECCENTRIC SHAFT 1312
000
00-813-249- SPHERICAL ROLLER BEARING
2012-0
008 CYLINDRICAL
32-402-330-
2014-0 SPACER, SWING JAW 1312
200
32-402-330-
2015-0 SEALPLATE, SWING JAW 1312
100
32-402-396-
2100-0 SPACER, INR LABYRINTH 1312
700
32-402-419-
2101-0 SEALPLATE, INNER 1312 *I-Note*
900
00-923-203-
2102-1 SEAL V-RING D405 X 25 1312
405
00-813-249-
2104-0 SPHERICAL ROLLER BEARING TAPERED
007
00-819-163-
2105-0 ADAPTER SLEEVE AH3176H 1312
376
32-402-396-
2106-0 SPACER,OUTR LABYRINTH 1312
900
00-819-121-
2108-0 LOCKNUT-BEARING HM3168 1312
168
2309-0 400.0446-001 SWING JAW PLT CORRUGATED M1 1312
2309-0 400.0964-001 SWING PL SHARP TOOTHED M1
10-114-354-
2316-0 DEFLECTOR PLATE 1312
000
53-466-927-
2321-1 WEDGE HEAD BOLT
000
10-314-500-
5003-0 TOGGLE SEAT BLOCK 1312 
000 TOP
17-201-650-
5004-0 TOGGLE SEAT
001
5006-0 
10-214-535- TOGGLE PLATE 775 1312 
Home Tel E-mail
 000

7003-1
53-466-629-
TENSION ROD CLEVIS 1312

500
53-466-415-
7003-9 THREADED ROD 1312
002
7004-0 400.0450-001 SPRING TENSION ROD
53-366-624-
7005-0 MOVABLE SPRING PLATE 1312
500
10-114-459-
9909-1 LEFT BEARING HSG 1312
500
53-167-007-
9909-2 RIGHT BEARING HSG 1312
500
53-466-623-
9910-0 GUIDE BOLT BRG HSG 1312
000
PART
CATALOG DESCRIPTION
NUMBER
1103-1 402.4521-01 CHEEK PLATE, UPPER
1103-2 402.4522-01 CHEEK PLATE, LOWER
1205-0 402.4386-00 SUPPORT STRIP 1513
1205-0 402.4386-00 SUPPORT STRIP 1513
1208-0 400.0485-001 STAT JAW PLATE COARSE CORRUG M1
1208-0 400.0409-001 STAT JAW PL SHARP TOOTHED M1
STAT/SWING JAW PLATE HD M1
1208-1 402.4501-01
1511
442.6115-001
442.5271-001

Previous: CH870 OVERSIZE BREAKER MANTLE

Next: NP/LT 1315/1415 BREAKER PLATE ASSEMBLY

Copyright © Shanghai Bogvik Wear Material Co., Ltd.

Privacy Policy Terms and Conditions


TOP

  
Home Tel E-mail