Dynasty 350 and 700

Issued January 2011 • Index No. AD/5.0

®
TIG/Stick Welding
Power Source

Industrial Applications Processes Input Power 208 – 575 V, 3- or 1-Phase

Quick Precision Fabrication
Heavy Fabrication
TIG (GTAW)
Pulsed TIG (GTAW-P)
Amperage Range 350: 3 – 350 A
700: 5 – 700 A
Specs Pipe and Tube Fabrication
Aerospace
Stick (SMAW)
Air Carbon Arc (CAC-A)
Rated Output 350: 300 A at 32 V, 60% Duty Cycle
700: 600 A at 44 V, 60% Duty Cycle
Aluminum Ship Repair 350: 1/4 in maximum
Anodized Aluminum Fabrication 700: 3/8 in maximum Weight 350: 135.5 lb (61 kg)
700: 198 lb (90 kg)

The Power of Blue . ®

AC TIG Features
Independent amplitude/amperage
Allows for
control allows EP and EN
any input
amperages to be set independently
voltage hookup (208–575 V)
to precisely control heat input to
with no manual linking, providing Miller recommends the work and electrode.
convenience in any job setting. Ideal
solution for dirty or unreliable power. Extended AC balance (30–99%)
aluminum filler.
controls the amount of oxide
Meter calibration allows meters to cleaning (amperage time in EN)
be calibrated for certification. which is essential for high quality
120 V auxiliary power receptacle welds on aluminum.
for cooling system or small tools. AC frequency (20–400 hz) controls
the width of the arc cone and the
Wind Tunnel Technology™ protects force of the arc.
internal electrical components
from airborne contaminants, AC Waveforms
extending the product life. Advance squarewave, fast
Fan-On-Demand™ power source freezing puddle, deep
cooling system operates only when penetration and fast travel speeds.
needed, reducing noise, energy use Soft squarewave for a soft
and the amount of contaminants Dynasty 350 buttery arc with maximum
pulled though the machine. machine only puddle control and good wetting action.
Blue Lightning™ high-frequency arc Sine wave for customers
Dynasty 350 Complete Package
starter for non-contact arc initiation. with Wireless Foot Control that like a traditional arc.
Provides more consistent arc starts Quiet with good wetting.
and greater reliability compared to Triangular wave reduces the
traditional HF arc starters. Easy to Stick Features (AC/DC) heat input and is good on
set and increases productivity. thin aluminum. Fast travel speeds.
Tailored arc control (DIG) allows the arc characteristic
Lift-Arc™ start provides AC or DC to be changed for specific applications and electrodes. DC TIG Features
arc starting without the use of Smooth running 7018 or stiffer, more penetrating 6010. Exceptionally smooth and precise
high frequency. arc for welding exotic materials.
Hot Start adaptive control provides positive arc starts
™

Program memory features 9 without sticking. High-speed DC TIG pulse controls.

independent program memories Pulse frequency capable of pulsing
AC frequency control adds additional stability when Stick 5000 pulses per second. Pulsing
that maintain/save your parameters.
welding in AC for smoother welds. adds arc stability, reduces heat input
Auto-postflow calculates the length and warpage and can increase travel
of postflow time based on the speeds. Other parameters include
amperage setting. This eliminates peak amperage, peak time and
the need to independently set background amperage.
the postflow time for different
amperages. This feature preserves
your tungsten and prevents porosity. Power source is warranted for 3 years, parts and labor.
Original main power rectifier parts are warranted for 5 years.

Miller Electric Mfg. Co. Equipment Sales US and Canada Web Site
An Illinois Tool Works Company Phone: 866-931-9730 www.MillerWelds.com
1635 West Spencer Street FAX: 800-637-2315
Appleton, WI 54914 USA International Phone: 920-735-4554
International FAX: 920-735-4125
 Specifications (Subject to change without notice.)

Welding Max.
Input Amperage Open-Circuit Rated Amps Input at Rated Load Output, 50/60 Hz Net
Model Power Range Voltage Output 208 V 230 V 400 V 460 V 575V KVA KW Dimensions Weight
Dynasty Three- 3– 350 A 75 VDC 250 A at 30 V, 29 26 15 13 10 10.3 9.9 H: 24-3/4 in (629 mm) 135.5 lb
350 Phase 10 –15 VDC* 100% Duty Cycle W: 13-3/4 in (349 mm) (61 kg)
300 A at 32 V, 35 32 18 16 13 12.7 12.1 D: 22 in (559 mm)
60% Duty Cycle with TIGRunner® with
Single- 3– 350 A 75 VDC 180 A at 27.2 V, 35 32 — 15 12 7.4 6.8 H: 45-1/8 in (1146 mm) TIGRunner®
Phase 10 –15 VDC* 100% Duty Cycle W: 23-1/8 in (587 mm) 308 lb
D: 43-3/4 in (1111 mm) (140 kg)
225 A at 29 V, 47 43 — 21 17 9.8 9.1
60% Duty Cycle
Dynasty Three- 5 – 700 A 75 VDC 500 A at 40 V, 75 68 39 34 27 27 26 H: 34-1/2 in (876 mm) 198 lb
700 Phase 10 –15 VDC* 100% Duty Cycle W: 13-3/4 in (349 mm) (90 kg)
600 A at 44 V, 97 88 51 44 35 35 34 D: 22 in (559 mm)
60% Duty Cycle with TIGRunner® with
Single- 5 – 700 A 75 VDC 360 A at 34 V, 82 74 — 37 30 17 16 H: 55-1/8 in (1400 mm) TIGRunner®
Phase 10 –15 VDC* 100% Duty Cycle W: 23-1/8 in (587 mm) 370 lb
D: 43-3/4 in (1111 mm) (168 kg)
450 A at 38 V, 115 104 — 52 42 24 22
60% Duty Cycle

Certified by Canadian Standards Association to both the Canadian and U.S. Standards. All CE models conform to the applicable parts of the IEC 60974 series of standards.
*Indicates sense-voltage for Lift-Arc TIG and Low OCV Stick.

Control Panel
9. Amperage Control
11
12 10. Encoder Control
13
10 11. Ammeter Display
12. Voltmeter Display

1 9 Additional Setup Parameter Values

Preprogrammed Starts
Dynasty 350 .020 – 3/16 in Tungsten
Dynasty 700 .040 –1/4 in Tungsten
Programmable Starts
f Amperage Dynasty 350: 3 – 200 A
Dynasty 700: 5 – 200 A
Time 0 – 200 Milliseconds
Ramp Time 0 – 250 Milliseconds
Minimum Amperage Dynasty 350: 3 – 25 A
2 3 4 5 6 7 8 Dynasty 700: 5 – 25 A
Additional Triggers 3T, 4T, Mini Logic,
Control Panel Parameter Values 4T Momentary
1. Memory 36 Combinations 6. Sequencer Control Waveshapes Advance Squarewave,
(9 AC TIG) Initial Amps Dynasty 350: 3 – 350 A Soft Squarewave, Sine
(9 AC Stick) Dynasty 700: 5 –700 A Wave, Triangular wave
(9 DC TIG) Initial Slope 0.0 – 50.0 Seconds Amplitude Lock EN EP Same,
(9 DC Stick) Final Slope 0.0 – 50.0 Seconds EN EP Independent
2. Polarity AC/DC Final Amps Dynasty 350: 3 – 350 A
Spot/Weld Timer 0.0 – 999 Seconds
Dynasty 700: 5 –700 A
3. Process/ TIG: HF Impulse, Lift Arc OCV Low OCV, Normal OCV
Arc Starting STICK: Adaptive Hot Start 7. Gas/DIG Preflow 0.0 – 25.0 Seconds
Postflow Auto Postflow, Stick Stuck Check On/Off
4. Output Control Standard Remote,
2T Trigger Hold, Output ON Adjust 0.0 – 50 Seconds Lockouts Four levels
5. Pulser Control DIG 0 –100% Arc Timer 0.0 – 9999 Hours
Pulses per Second DC: 0.1– 5000 PPS 8. AC Waveshape and 0 – 59 Min
AC: 0.1 – 500 PPS EN Amperage 3 – 350 A/5 –700 A Cycle Counter 0 – 999,999 Cycles
Peak Time 5 – 95% EP Amperage 3 – 350 A/5 –700 A
Meter Calibration ±0 – 20.0 Amps
Background Amps 5 – 95% Balance 30 – 99%
±0 – 20.0 Volts
AC Frequency 20 – 400 Hz

2
 Performance Data
DUTY CYCLE
Dynasty 350 Dynasty 700
3-PHASE 3-PHASE
% AMPERAGE % AMPERAGE
30% 350 A 30% 700 A
60% 300 A 60% 600 A
100% 250 A 100% 500 A

1-PHASE 1-PHASE
% AMPERAGE % AMPERAGE
10% 350 A 10% 700 A
30% 250 A 30% 500 A
60% 225 A 60% 450 A
100% 180 A 100% 360 A

TIG Upgrade Chart

Which Machine is Right for You?
Why Upgrade? Syncrowave 350 Dynasty 350 Dynasty 350 Benefits
Maximum Thickness Capacity 1/2 in Aluminum UPGRADE 5/8 in Aluminum Increases aluminum thickness.
High Frequency Arc Starting Continuous HF UPGRADE Start Only Start Only limits HF interference issues.
Frequency Control Fixed at 60 Hz UPGRADE Variable 20–400 Hz Higher frequencies provide better arc control
AC Output Control and faster travel speeds.
AC Waveforms Soft Squarewave UPGRADE Advanced Squarewave Soft Squarewave Advanced Squarewave=Travel faster
Soft Squarewave= Maximum puddle control

Sine Wave Triangular Wave Sine Wave= Traditional characteristics

Triangular Wave= Reduced heat input

Weld Aluminum UPGRADE Waveshaping controls maintain the point. The

with Pointed Tungsten benefits are: reduced heat input into your part,
smaller weld beads, better starting and more
control of the arc.

Portability 496 lb UPGRADE 135 lb Easier to move because of size and weight.
Manual Links Auto-Line™ Auto-Line™ allows the unit to operate on any
208/230/460 V 208–575 V voltage. Single- or three-phase. Even generators!
Single-Phase Single-Phase or Three-Phase
Power Draw at 300 Amps 110 A at 230 V UPGRADE 32 A at 230 V Power requirement to operate is much less.
Single-Phase Three-Phase Smaller electrical service needed, smaller
breaker/fuses and power cord.

Precise Controls Some Digital Controls UPGRADE All Digital Controls Accuracy and repeatability with all digital controls.

3
 AC Waveshape Controls
Feature Waveform Effect on Bead Effect on Appearance

AC Balance Control 51 – 99% EN Reduces balling Narrow bead, with no

action and helps visible cleaning
Controls arc cleaning action. Adjusting the maintain point

Amperage
% EN of the AC wave controls the width of % EP
0 Bead
the etching zone surrounding the weld.
% EN
Note: Set the AC Balance control for adequate arc Deep, narrow
cleaning action at the sides and in front of the weld Time (1 AC Cycle) penetration No Visible Cleaning
puddle. AC Balance should be fine tuned according to
how heavy or thick the oxides are.
30 – 50% EN Wider bead and
Increases balling cleaning action
action of the electrode

Amperage
% EP
0
% EN Bead
Shallow
Time (1 AC Cycle) penetration
Cleaning

60 Cycles per Second Wider bead, Wider bead and

AC Frequency Control
good penetration — cleaning action
Controls the width of the arc cone. Increasing ideal for buildup work
Amperage

% EP
the AC Frequency provides a more focused arc 0
with increased directional control. % EN Bead
Note: Decreasing the AC Frequency softens the arc
Time (1 AC Cycle)
and broadens the weld puddle for a wider weld bead. Cleaning

120 Cycles per Second Narrower bead for Narrower bead and
fillet welds and cleaning action
% % automated applications
Amperage

EP EP
0 Bead
% EN % EN
Time (1 AC Cycle) Cleaning

Independent AC Amperage Control More current in Narrow bead, with no

EN than EP: visible cleaning
Allows the EN and EP amperage values to be Deeper penetration
Current

EP+
set independently. Adjusts the ratio of EN to 0 and faster travel
EP amperage to precisely control heat input EN – speeds Bead
to the work and the electrode. EN amperage
controls the level of penetration, while EP Time
No Visible Cleaning
amperage dramatically effects the arc cleaning
action along with the AC Balance control. Wider bead and
More current
in EP than EN: cleaning action
EP+ Shallower
Current

0 penetration
EN –
Bead
Time
Cleaning

4
 AC Waveshape Controls (Continued)
AC Waveform Selection
Select from four different AC waveforms to optimize the arc characteristic for your application. Choose from:

ADVANCED SQUAREWAVE SOFT SQUAREWAVE

(+) (+) All the benefits of

advanced square,
Fast transitions for

Amps
Amps

0 fine tuned to provide

0 responsive and
a smooth, soft arc
dynamic arc.
(–) (–) with maximum
puddle control and
good wetting action.
Time (1 AC Cycle) Time (1 AC Cycle)

SINEWAVE TRIANGULAR WAVE

Unconventional wave
Square transitions provides the punch of
(+) eliminate the need for (+) the peak amperage,
continuous HF, while while reducing overall
Amps

Amps
0 the sinewave peaks 0 heat input. Quick puddle
soften the arc. formation reduces weld
(–) (–) time — limiting heat
input and reducing weld
Time (1 AC Cycle)
distortion, especially
Time (1 AC Cycle)
on thin materials.

Pulse TIG Controls

High Speed DC TIG-Pulse Controls
• PPS Pulses per second (Hz): DC = 0.1 – 5,000 PPS / AC = 0.1 – 500 PPS
• % ON – % Peak Time: 5 - 95% (Controls the amount of time during each pulse cycle at the PEAK amperage.)
• Background Amps: 5 – 99% (Sets the low-pulse amperage value as a % of the Peak Amps.)

CONVENTIONAL PULSED TIG HIGH SPEED PULSED TIG

Peak Time % Peak Time %

Peak Peak
Amps Amps

Background Background
Amps Amps
(% of Peak) (% of Peak)
Pulse Cycle Pulse Cycle

Typically from 1 to 10 PPS. Provides a heating and cooling effect In excess of 40 PPS, Pulsed TIG becomes more audible than visible —
on the weld puddle and can reduce distortion by lowering the causing increased puddle agitation for a better as-welded microstructure.
average amperage. This heating and cooling effect also produces a Pulsing the weld current at high speeds — between a high Peak and a
distinct ripple pattern in the weld bead. The relationship between low Background amperage — can also constrict and focus the arc.
pulse frequency and travel speed determines the distance between This results in maximum arc stability, increased penetration and
the ripples. Slow pulsing can also be coordinated with filler metal increased travel speeds (Common Range: 100 – 500 PPS).
addition and can increase overall control of the weld puddle.
The Arc-Sharpening effects of high speed pulsing are expanded to new
dimensions. The ability to pulse at 5,000 PPS further enhances arc
stability and concentration potential — which is extremely beneficial to
automation where maximum travel speeds are required.

5
 Packages
Dynasty Power Sources
®

Dynasty® 350 #907 204 (CSA) Dynasty® 700 #907 101 (CSA)
(Auto-Line™ 208–575 VAC) (Auto-Line™ 208–575 VAC)
Dynasty® 350 #907 204-02-1 (CE) Dynasty® 700 #907 101-02-1 (CE)
(Auto-Line™ 380–575 VAC) (Auto-Line™ 380–575 VAC)
Includes 8 ft (2.4 m) primary cord, Includes (2) thread lock weld cable
(2) Dinse 50 connectors, and DVD Setup connectors (#225 029), (1) water-cooled
Video (#251 116). thread lock torch adapter (#225 028) for
Note: TIG torch adapter must be ordered separately. #18 or #20 torches, and DVD Setup Video
(#251 116).
Note: Primary cord and TIG torch must be ordered
separately.

TIGRunner Packages
®

Dynasty 350 TIGRunner® Dynasty 700 TIGRunner®

#907 204-00-1 (CSA) #907 101-00-1 (CSA)
Completely assembled. Completely assembled.
Package includes: Package includes:
Dynasty® 350 (#907 204) Dynasty® 700 (#907 101)
Coolmate™ 3.5 Coolant System Coolmate™ 3.5 Coolant System
Cart with the following features: Cart with the following features:
single cylinder rack, foot pedal holder, single cylinder rack, foot pedal holder,
(3) cable/torch holders, (2) TIG electrode (3) cable/torch holders, (2) TIG electrode
filler holders and a convenient drawer filler holders and a convenient drawer
for tungsten and consumable storage for tungsten and consumable storage
Note: Torch package and coolant must be ordered Note: Torch package and coolant must be ordered
separately. separately.

Complete Packages
Dynasty 350 Complete Dynasty 700 Complete
#951 402 (CSA) w/Wireless Foot Control #951 404 (CSA) w/Wireless Foot Control
#951 401 (CSA) w/Foot Control #951 403 (CSA) w/Foot Control
Completely assembled. Completely assembled.
Package includes: Package includes:
Dynasty® TIGRunner® (#907 204-00-1) Dynasty® 700 TIGRunner (#907 101-00-1)
Wireless Remote Foot Control (#300 429) Wireless Remote Foot Control (#300 429)
or RFCS-14 HD Foot Control (#194 744) or RFCS-14 HD Foot Control (#194 744)
25 ft (7.6 m) Weldcraft CS310 25 ft (7.6 m) Weldcraft WP18SC
water-cooled torch water-cooled torch
Torch cable cover Torch cable cover
CS310AKC torch accessory kit includes AK18C Torch Accessory Kit includes
shielding cups, collets, collet bodies, shielding cups, collets, collet bodies and
and 2% cerium tungsten electrodes 2% cerium tungsten electrodes (3/32,
(1/16, 3/32, and 1/8 in) 1/8 and 5/32 in)
Smith regulator/flowmeter HM2051A-580 Smith regulator/flowmeter H1954D-580
Gas hose (regulator to machine) Gas hose (regulator to machine)
Water-cooled Dinse torch adapter Water-cooled thread lock torch adapter
15 ft (4.6 m) 1/0 weld lead with clamp 12 ft (3.7 m) 4/0 weld lead with clamp
(work or ground lead) and Dinse connector (work or ground lead)
4 gallons of pre-mixed low-conductivity 4 gallons of pre-mixed low-conductivity
coolant (#043 810) coolant (#043 810)

6
 Genuine Miller Accessories
Torch Kits
250 A Water-Cooled Torch Kit #300 185 300 A Water-Cooled Torch Kit #300 183 400 A Water-Cooled Torch Kit #300 186
25 ft (7.6 m) Weldcraft® WP20 torch Recommended for Dynasty 350 Recommended for Dynasty 700
Torch cable cover 25 ft (7.6 m) Weldcraft® CS310 torch 25 ft (7.6 m) Weldcraft® WP18SC torch
AK4C torch accessory kit includes Torch cable cover Torch cable cover
shielding cups, collets, collet bodies CS310AKC torch accessory kit includes AK18C torch accessory kit includes
and 2% cerium tungsten electrodes shielding cups, collets, collet bodies shielding cups, collets, collet bodies
(1/16, 3/32 and 1/8 in) and 2% cerium tungsten electrodes and 2% cerium tungsten electrodes
Smith® regulator/flowmeter HM2051A-580 (1/16, 3/32 and 1/8 in) (3/32, 1/8 and 5/32 in)
Gas hose (regulator to machine) Smith® regulator/flowmeter HM2051A-580 Smith® regulator/flowmeter H1954D-580
Water-cooled Dinse torch adapter Gas hose (regulator to machine) Gas hose (regulator to machine)
15 ft (4.6 m) 1/0 weld lead with clamp Water-cooled Dinse torch adapter Water-cooled thread lock torch adapters
(work or ground lead) and Dinse connector 15 ft (4.6 m) 1/0 weld lead with clamp 12 ft (3.7 m) 4/0 weld lead with clamp
(work or ground lead) and Dinse connector (work or ground lead)

Runner Cart #300 244 Weld Current Sensor #300 179 Field Wireless Remote Hand
Designed to accommodate Detects when work clamp is not connected Control #300 430
Dynasty® or Maxstar® 350 and prevents expensive damage to For remote current and
or 700 power sources and a disconnect devices and input power cord contactor control. Receiver
Coolmate™ 3.5 Cooler. Cart and wiring. plugs directly into the
features single cylinder rack, 14-pin receptacle of Miller
foot pedal holder, (3) cable/ Educational Materials machine. 300 ft (91.4 m) operating range.
torch holders, (2) TIG To order these items, distributors can call the Miller
Literature Distribution Center at 1-920-735-4356, or RCCS-14 Remote
electrode filler holders and a convenient
FAX 1-920-735-4011. Contactor and Current
drawer for tungsten and consumable storage.
Gas Tungsten Arc (TIG) Welding Book Control #043 688
Coolmate™ 3.5 #300 245 14-pin plug. North/south rotary-motion
#170 555
Designed to integrate with fingertip control fastens to TIG torch using
the Dynasty® and Maxstar® Simulator and Setup CD-ROM #233 558 two Velcro® straps. Includes 26.5 ft (8 m)
350 and 700 power DVD Setup Video #251 116 control cord.
sources. For use with water-cooled torches Video topics include Tungsten Selection, RFCS-14 HD Foot
rated up to 600 amps. 3.5 gallon capacity. Setup Menus, DC Pulse, Sequencer, Control #194 744
TIG Coolant #043 810 Balance and Frequency Settings. (Included Maximum flexibility is
Sold in multiples of 4. Pre-mixed low- with machine.) accomplished with a
conductivity Miller coolant contains ethylene reconfigurable cord that
glycol and deionized water to protect from Tungsten can exit the front, back or either side of the
freezing and boiling -37˚ to 227˚F (-38˚ to Tungsten is 7 in length and available in pkgs of 10. pedal. Foot pedal provides remote current
Order from Miller Parts.
108˚C). 1-gallon plastic recyclable bottles. and contactor control. Includes 20 ft (6 m)
Water-Cooled Dinse 2% Ceriated (orange) for AC/DC applications cord and 14-pin plug.
#195 377 For Dynasty #WC040X7 .040 in, 10 – 80 A
#WC116X7 1/16 in, 70 –150 A RHC-14 Hand Control #242 211 020
and Maxstar® 350. Miniature hand control for remote current
Used to adapt WP20, WP18, and CS310 to #WC332X7 3/32 in, 140– 250 A
#WC018X7 1/8 in, 225 – 400 A and contactor control. Dimensions: 4 x 4 x
dinse-style connector. Order from Miller 3-1/4 in (102 x 102 x 83 mm). Includes
Parts. #WC532X7 5/32 in, 300 – 500 A
20 ft (6 m) cord and 14-pin plug.
Water-Cooled Thread Lock 1.5% Lanthanum (gold) for AC/DC applications
#WL040X7 .040 in, 10 – 80 A RMLS-14 Switch
#225 028 #129 337
For Dynasty and Maxstar 700. #WL116X7 1/16 in, 70 –150 A
#WL332X7 3/32 in, 140 – 250 A Momentary- and maintained-contact rocker
Used with (WP125, WP24W, switch for contactor control. Push forward
WP25, WP20, WP18, WP12, #WL018X7 1/8 in, 225 – 400 A
#WL532X7 5/32 in, 300 – 500 A for maintained contact and backward for
CS310, CS410, WP22, WP27) momentary contact. Includes 26.5 ft (8 m)
water-cooled torch. Order from Miller Parts.
Remote Controls and Switches cord and 14-pin plug.
Automation Interface Connection Kit
Wireless Remote Foot RMS-14 On/Off Control
#195 516 Field
Control #300 429 #187 208
Provides control of power source welding
For remote current and Momentary-contact switch for contactor
parameters through a 28-pin receptacle.
contactor control. control. Rubber-covered pushbutton
The 28-pin receptacle replaces the standard
Receiver plugs directly dome switch ideal for repetitive on-off
14-pin receptacle and requires a PLC
into the 14-pin receptacle of Miller applications. Includes 26.5 ft (8 m) cord
controller to operate the power source.
machine. 90 ft (27.4 m) operating range. and 14-pin plug.
Ideal for automated equipment integration.

7
 Ordering Information
Equipment and Options Stock No. Description Qty. Price
Dynasty 350
® #907 204 Auto-Line 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord
™

Dynasty® 350 TIGRunner ® #907 204-00-1 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord. Requires coolant
Dynasty® 350 Complete #951 402 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord
with Wireless Remote Foot Control
Dynasty® 350 Complete with Foot Control #951 401 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. 8 ft primary cord
Dynasty® 350 International #907 204-02-1 Auto-Line™ 380 – 575 VAC, 50/60 Hz, CE. 8 ft primary cord
Dynasty® 700 #907 101 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA
Dynasty® 700 TIGRunner ® #907 101-00-1 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA. Requires coolant
Dynasty® 700 Complete #951 404 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA
with Wireless Remote Foot Control
Dynasty® 700 Complete with Foot Control #951 403 Auto-Line™ 208 – 575 VAC, 50/60 Hz, CSA
Dynasty® 700 International #907 101-02-1 Auto-Line™ 380 – 575 VAC, 50/60 Hz, CE
TIG Torch Kits
Weldcraft® 250 A Water-Cooled Torch Kit #300 185 See page 7
Weldcraft® 300 A Water-Cooled Torch Kit #300 183 See page 7. Recommended for Dynasty 350
Weldcraft® 400 A Water-Cooled Torch Kit #300 186 See page 7. Recommended for Dynasty 700
Weldcraft® 200 A Air-Cooled Torch #WP2625RM For Dynasty 350 only. Adapter #195 379 required. Order from Miller Parts
Consumables and Tungsten Distributor: See Miller Parts Catalog
Gas Cylinder, Hose and Fittings
Remote Controls
Wireless Remote Foot Control #300 429 Foot control with wireless 90 ft (27.4 m) operating range
Wireless Remote Hand Control #300 430 Hand control with wireless 300 ft (91.4 m) operating range
RCCS-14 #043 688 North/south fingertip control
RFCS-14 HD #194 744 Heavy-duty foot control
RHC-14 #242 211 020 Hand control
RMLS-14 #129 337 Momentary/maintained rocker switch
RMS-14 #187 208 Momentary rubber dome switch
Extension Cables #242 208 025 25 ft (7.6 m)
#242 208 050 50 ft (15.2 m)
#242 208 080 80 ft (24.4 m)
Accessories
Runner™ Cart #300 244 See page 7
Coolmate™ 3.5 #300 245 Requires coolant
TIG Coolant #043 810 Sold in multiples of four in 1-gallon plastic bottles
Automation Interface Kit #195 516 Field. Provides required automation connections
Weld Current Sensor #300 179 Field. Installation required
Gas Tungsten Arc (TIG) Welding Book #170 555 Order at MillerWelds.com/resources/tools
Simulator and Setup CD-ROM #233 558
DVD Setup Video #251 116 Included with machine
Torch Adapters Supplied with power source and torch kits
Water-Cooled Dinse #195 377 Used to connect water-cooled torch to Dinse terminal machine. For WP20, WP18
and CS310 (adapter included in Complete Package). Order from Miller Parts
Water-Cooled Thread Lock #225 028 Used to connect water-cooled torch to Dynasty/Maxstar 700.
Order from Miller Parts
Cable Connectors Supplied with power source and torch kits
Dinse Connector 50 mm (1 male) #042 418 Used to connect weld lead to Dinse terminal machine
Thread Lock Connectors (2 male) #225 029 Used to connect weld lead to Dynasty 700 or Maxstar 700. Order from Miller Parts
Dinse Connector 50 mm (1 male, 1 female) #042 419 Used to extend weld cables
Tweco® Terminal Adapter #042 465 Male Dinse to female Tweco
Cam-Lok Terminal Adapter #042 466 Male Dinse to female Cam-Lok
Miscellaneous
Stick Electrodes
Welding and Work Cables
Welding Gloves and Helmet

Date: Total Quoted Price:

Distributed by:

Litho in USA