2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple

Choice Questions

Engineering Interview Questions.com

Engineering interview questions,multiple choice questions,objective type
questions,seminor topics,lab viva questions and answers ,online quiz test pdf free
download for freshers.

HOME interview Questions MCQs *LAB VIVA CLASS NOTES SEMINAR TOPICS
ONLINE TEST GATE IIT JEE CAT

Home » Mechanical Engineering Multiple Choice Questions » Custom Search

Search
powered by
84 TOP MOST Strength of Materials – Mechanical
Engineering Multiple choice Questions and Answers

84 TOP MOST Strength of

Materials – Mechanical
Engineering Multiple choice
Questions and Answers
Start Download ­ PDF Now
Convert Any File to a PDF. Get the Free From Doc to Pdf App! Go to
fromdoctopdf.com

Posted on June 2, 2015 by engineer 12 Comments

Ads by Google

Plastic Materials

Tensile Stress

Strength of Materials Interview Questions

and Answers :­
1. Strain is defined as the ratio of
(a) change in volume to original volume
(b) change in length to original length
(c) change in cross­sectional area to original cross­sectional area
(d) any one of the above
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 1/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

(e) none of the above.

Ans: d

2. Hooke’s law holds good up to

(a) yield point
(b) limit of proportionality
(c) breaking point
(d) elastic limit
(e) plastic limit.
Ans: b

3. Young’s modulus is defined as the ratio of

(a) volumetric stress and volumetric strain
(b) lateral stress and lateral strain
(c) longitudinal stress and longitudinal strain
(d) shear stress to shear strain
(e) longitudinal stress and lateral strain.
Ans: c

Engineering
4. The unit of Young’s modulus is
(a) mm/mm Questions
(b) kg/cm
(c) kg
Engineering Quest…
3.8K likes
(d) kg/cm2
(e) kg cm2.
Ans: d Like Page

5. Deformation per unit length in the direction of force is known Be the first of your friends to like this

as
(a) strain
(b) lateral strain
(c) linear strain
Find us on Google
(d) linear stress
(e) unit strain. Plus
Ans: c
Engineering intervie
6. It equal and opposite forces applied to a body tend to elongate Follow
it, the stress so produced is called 493 followers
(a) internal resistanpe
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 2/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

(b) tensile stress

(c) transverse stress
(d) compressive stress
(e) working stress.
Ans: b

7. The materials having same elastic properties in all directions

are called
(a) ideal materials
(b) uniform materials
(c) isotropic materials
(d) paractical materials
(e) elastic materials.
Ans: c

8. A thin mild steel wire is loaded by adding loads in equal

increments till it breaks. The extensions noted with increasing
loads will behave as under
(a) uniform throughout
(b) increase uniformly
(c) first increase and then decrease
(d) increase uniformly first and then increase rapidly
(e) increase rapidly first and then uniformly.
Ans: d

9. Modulus of rigidity is defined as the ratio of

(a) longitudinal stress and longitudinal strain
(b) volumetric stress and volumetric strain
(c) lateral stress and lateral strain
(d) shear stress and shear strain
(e) linear stress and lateral strain.
Ans: d

10. If the radius of wire stretched by a load is doubled, then its

Young’s modulus will be
(a) doubled
(b) halved
(c) become four times
(d) become one­fourth
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 3/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

(e) remain unaffected.

Ans: e

11. The ultimate tensile stress of mild steel compared to ultimate

compressive stress is
(a) same
(b) more
(c) less
(d) more or less depending on other factors
(e) unpredictable.
Ans: b

12. Tensile strength of a material is obtained by dividing the

maximum load during the test by the
(a) area at the time of fracture
(b) original cross­sectional area
(c) average of (a) and (b)
(d) minimum area after fracture
(e) none of the above.
Ans: b

13. The impact strength of a material is an index of its

(a) toughness
(b) tensile strength
(c) capability of being cold worked
(d) hardness
(e) fatigue strength.
Ans: a

14. The Young’s modulus of a wire is defined as the stress which

will increase the length of wire compared to its original length
(a) half
(b) same amount
(c) double
(d) one­fourth
(e) four times.
Ans: b

http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 4/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

15. Percentage reduction of area in performing tensile test on

cast iron may be of the order of
(a) 50%
(b) 25%
(c) 0%
(d) 15%
(e) 60%.
Ans: c

16. The intensity of stress which causes unit strain is called

(a) unit stress
(b) bulk modulus
(c) modulus of rigidity
(d) modulus of elasticity
(e) principal stress.
Ans: d

17. True stress­strain curve for materials is plotted between

(a) load/original cross­sectional area and change in
length/original length
(b) load/instantaneous cross­sectional area original area and
log.
(c) load/instantaneous cross­sectional area and change in
length/original length
(d) load/instantaneous area and instantaneous area/original
area
(e) none of the above.
Ans: b

18. During a tensile test on a specimen of 1 cm cross­section,

maximum load observed was 8 tonnes and area of cross­section
at neck was 0.5 cm2. Ultimate tensile strength of specimen is
(a) 4 tonnes/cm2
(b) 8 tonnes/cm2
(c) 16 tonnes/cm2
(d) 22 tonnes/cm2
(e) none of the above.
Ans: b

http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 5/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

19. For steel, the ultimate strength in shear as compared to in

tension is nearly
(a) same
(b) half
(c) one­third
(d) two­third
(e) one­fourth.
Ans: b

20. Which of the following has no unit

(a) kinematic viscosity
(b) surface tension
(c) bulk modulus
(d) strain
(e) elasticity.
Ans: d

21. Which is the false statement about true stress­strain method

(a) It does not exist
(b) It is more sensitive to changes in both metallurgical and
mechanical conditions
(c) It gives, a more accurate picture of the ductility
(d) It can be correlated with stress­strain values in other tests
like torsion, impact, combined stress tests etc.
(e) It can be used for compression tests as well.
Ans: a

22. In a tensile test on mild steel specimen, the breaking stress

as compared to ultimate tensile stress is
(a) more
(b) less
(c) same
(d) more/less depending on composition
(e) may have any value.
Ans: b

23. If a part is constrained to move and heated, it will develop

(a) principal stress
(b) tensile stress
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 6/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

(c) compressive stress

(d) shear stress
(e) no stress.
Ans: c

24. Which of the following materials is most elastic

(a) rubber
(b) plastic
(c) brass
(d) steel
(e) glass.
Ans: d

25. The value of modulus of elasticity for mild steel is of the

order of
(a) 2.1xl05 kg/cm2
(b) 2.1 X 106 kg/cm2
(c) 2.1 x 107 kg/cm2
(d) 0.1 xlO6 kg/cm2 (<?) 3.8 x 106 kg/cm2.
Ans: b

26. The value of Poisson’s ratio for steel is between

(a) 0.01 to 0.1
(b) 0.23 to 0.27
(c) 0.25 to 0.33
(d) 0.4 to 0.6
(e) 3 to 4.
Ans: c

27. The buckling load for a given material depends on

(a) slenderness ratio and area of cross­section
(b) Poisson’s ratio and modulus of elasticity
(c) slenderness ratio and modulus of elasticity
(d) slenderness ratio, area of cross­section and modulus of
elasticity
(e) Poisson’s ratio and slenderness ratio.
Ans: d

http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 7/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

28. The total elongation produced in a bar of uniform section

hanging vertically downwards due to its own weight is equal to
that produced by a weight
(a) of same magnitude as that of bar and applied at the lower
end
(b) half the weight of bar applied at lower end
(c) half of the square of weight of bar applied at lower end
(d) one­fourth of weight of bar applied at lower end
(e) none of the above.
Ans: b

29. The property of a material by virtue of which a body returns

to its original, shape after removal of the load is called
(a) plasticity
(b) elasticity
(c) ductility
(d) malleability
(e) resilience.
Ans: b

30. The materials which exhibit the same elastic properties in all
directions are called
(a) homogeneous
(b) inelastic
(c) isotropic
(d) isentropic
(e) visco­elastic.
Ans: c

31. The value of Poisson’s ratio for cast iron is

(a) 0.1 to 0.2
(b) 0.23 to 0.27
(c) 0.25 to 0.33
(d) 0.4 to 0.6
(e) 3 to 4.
Ans: b

32. The property of a material which allows it to be drawn into a

smaller section is called
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 8/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

(a) plasticity
(b) ductility
(c) elasticity
(d) malleability
(e) drawabihty.
Ans: b

33. Poisson’s ratio is defined as the ratio of

(a) longitudinal stress and longitudinal strain
(b) longitudinal stress and lateral stress
(c) lateral stress and longitudinal stress
(d) lateral stress and lateral strain
(e) none of the above.
Ans: c

34. For which material the Poisson’s ratio is more than unity
(a) steel
(b) copper
(c) aluminium
(d) cast iron
(e) none of the above.
Ans: e

35. The property of a material by virtue of which it can be beaten

or rolled into plates is called
(a) malleability
(b) ductility
(c) plasticity
(d) elasticity
(e) reliability.
Ans: a

36. The change in the unit volume of a material under tension

with increase in its Poisson’s ratio will ,
(a) increase
(b) decrease
(c) remain same
(d) increase initially and then decrease

http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 9/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

(e) unpredictable.
Ans: b

37. The percentage reduction in area of a cast iron specimen

during tensile test would be of the order of
(a) more than 50%
(b) 25—50%
(c) 10—25%
(d) 5—10%
(e) negligible.
Ans: e

38. If a material expands freely due to heating it will develop

(a) thermal stresses
(b) tensile stress
(c) bending
(d) compressive stress
(e) no stress.
Ans: e

39. In a tensile test, near the elastic limit zone, the

(a) tensile strain increases more quickly
(b) tensile strain decreases more quickly
(c) tensile strain increases in proportion to the stress
(d) tensile strain decreases in proportion to the stress
(e) tensile strain remains constant.
Ans: a

40. The stress necessary to initiate yielding is

(a) considerably greater than that necessary to continue it
(b) considerably lesser than that necessary to continue it
(c) greater than that necessary to stop it
(d) lesser than that necessary to stop it
(e) equal to that necessary to stop it.
Ans: a

Strength of Materials Interview Questions and

Answers pdf :­

http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 10/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

41. In the tensile test, the phenomenon of slow extension of the

material, i. e. stress increasing with the time at a constant load
is called
(a) creeping
(b) yielding
(c) breaking
(d) plasticity
(e) none of the above.
Ans: a

42. The stress developed in a material at breaking point in

extension is called
(a) breaking stress
(b) fracture stress
(c) yield point stress
(d) ultimate tensile stress
(e) proof stress.
Ans: a

43. Rupture stress is

(a) breaking stress
(b) maximum load/original cross­sectional area
(c) load at breaking point/A
(d) load at breaking point/neck area
(e) maximum stress.
Ans: d

44. The elasticity of various materials is controlled by its

(a) ultimate tensile stress
(b) proof stress
(c) stress at yield point
(d) stress at elastic limit
(e) tensile stress.
Ans: d

45. The ratio of lateral strain to the linear strain within elastic
limit is known as
(a) Young’s modulus
(b) bulk modulus
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 11/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

(c) modulus of rigidity

(d) modulus of elasticity
(e) Poisson’s ratio.
Ans: e

46. The ratio of direct stress to volumetric strain in case of a

body subjected to three mutually perpendicular stresses of equal
intensity, is equal to
(a) Young’s modulus
(b) bulk modulus
(c) modulus of rigidity
(d) modulus of elasticity
(e) Poisson’s ratio.
Ans: b

47. The stress at which extension of the material takes place

more quickly as compared to the increase in load is called
(a) elastic point of the material
(b) plastic point of the material
(c) breaking point of the material
(d) yielding point of the material
(e) ultimate point of the material.
Ans: d

48. In question 56, the internal reaction in bottom 80 cm length

will be
(a) same in both cases
(b) zero in first case
(c) different in both cases
(d) data are not sufficient to determine same
(e) none of the above.
Ans: b

49. Flow stress corresponds to

(a) fluids in motion
(b) breaking point
(c) plastic deformation of solids
(d) rupture stress

http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 12/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

(e) none of the above.

Ans: c

50. When it is indicated that a member is elastic, it means that

when force is applied, it will
(a) not deform
(b) be safest
(c) stretch
(d) not stretch
(e) none of the above.
Ans: c

51. The energy absorbed in a body, when it is strained within the

elastic limits, is known as
(a) strain energy
(b) resilience
(c) proof resilience
(d) modulus of resilience
(e) toughness..
Ans: a

52. Resilience of a material is considered when it is subjected to

(a) frequent heat treatment
(b) fatigue
(c) creep
(d) shock loading
(e) resonant condition.
Ans: d

53. The maximum strain energy that can be stored in a body is

known as
(a) impact energy
(b) resilience
(c) proof resilience
(d) modulus of resilience
(e) toughness.
Ans: c

http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 13/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

54. The total strain energy stored in a body is termed as

(a) resilience
(b) proof resilience
(c) modulus of resilience
(d) toughness
(e) impact energy.
Ans: a

55. Proof resilience per material is known as

(a) resilience
(b) proof resilience
(c) modulus of resilience
(d) toughness
(e) impact energy.
Ans: c

56. The stress induced in a body due to suddenly applied load

compared to when it is applied gradually is
(a) same
(b) half
(c) two times
(d) four times
(e) none of the above.
Ans: c

57. The strain energy stored in a body due to suddenly applied

load compared to when it is applied gradually is
(a) same
(b) twice
(c) four times
(d) eight times
(e) half.
Ans: c

58. A material capable of absorbing large amount of energy

before fracture is known as
(a) ductility
(b) toughness
(c) resilience
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 14/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

(d) shock proof

(e) plasticity.
Ans: b

59. Coaxing is the method of increasing

(a) strength by reversible cycling
(b) corrosion resistance by spraying
(c) hardness by surface treatment
(d) fatigue resistance by over­stressing the metal by successively
increasing loadings
(e) creep by head treatment.
Ans:

60. A beam is loaded as cantilever. If the load at the end is

increased, the failure will occur
(a) in the middle
(b) at the tip below the load
(c) at the support
(d) anywhere
(e) none of the above.
Ans: d

61. A non­yielding support implies that the

(a) support is frictionless
(b) support can take any amount of reaction
(c) support holds member firmly
(d) slope of the beam at the support is zero
(e) none of the above.
Ans: d

62. The ratio of elongation in a prismatic bar due to its own

weight (W) as compared to another similar bar carrying an
additional weight (W) will be
(a) 1:2
(b) 1 : 3
(c) 1 : 4
(d) 1 : 2.5
(e) 1 : 2.25.
Ans: b
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 15/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

63. In a prismatic member made of two materials so joined that

they deform equally under axial stress, the unit stresses in two
materials are
(a) equal
(b) proportional to their respective moduli of elasticity
(c) inversely proportional to their moduli of elasticity
(d) average of the sum of moduli of elas­ticity
(e) none of the above.
Ans: b

64. In riveted boiler joints, all stresses, shearing, bearing and

tensile are based on the
(a) size of rivet
(b) size of the drilled or reamed hole
(c) average of size of rivet and hole
(d) smaller of the two
(e) any one of the above.
Ans: b

65. The distance between the centres of the rivets in adjacent

rows of zig­zag riveted joint is known as
(a) pitch
(b) back pitch
(c) diagonal pitch
(d) diametral pitch
(e) lap.
Ans: c

66. Efficiency of a riveted joint is the ratio of its strength (max.

load it can resist without failure) to the strength of the
unpunched plate in
(a) tension
(b) compression
(c) bearing
(d) any one of the above
(e) none of the above.
Ans: a

http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 16/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

67. When two plates are butt together and riveted with cover
plates with two rows of rivets, the joi;it is known as
(a) lap point
(b) butt joint
(c) single riveted single cover butt joint
(d) double riveted double cover butt joint
(e) single riveted double cover butt joint.
Ans: d

68. A riveted joint in which every rivet of a row is opposite to

other rivet of the outer row, is known as
(a) chain riveted joint
(b) diamond riveted joint
(c) criss­cross riveted joint
(d) zig­zag riveted joint
(e) none of the above.
Ans: a

69. A riveted joint in which the number otrivets decrease from

innermost to outer most row is called
(a) chain riveted joint
(b) diamond riveted joint
(c) criss­cross riveted joint
(d) zig­zag riveted joint
(e) none of the above.
Ans: b

70. If the rivets in adjacent rows are staggered and the

outermost row has only one rivet, the arrangement of the rivets
is called
(a) chain riveting
(b) zig zag riveting
(c) diamond riveting
(d) criss­cross riveting
(e) none of the above.
Ans: c

71. Diamond riveted joint can be adopted in the case of

following type of joint
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 17/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

(a) butt joint

(b) lap joint
(c) double riveted lap joints
(d) all types of joints
(e) none of the above.
Ans: a

72. Rivets are made of following type of material

(a) tough
(b) hard
(c) resilient
(d) ductile
(e) malleable.
Ans: d

73. The weakest section of a diamond riveting is the section

which passes through
(a) the first row
(b) the second row
(c) the central row
(d) one rivet hole of the end row
(e) none of the above.
Ans: d

74. The deformation of a bar under its own weight compared to

the deformation of same body subjected to a direct load equal to
weight of the body is
(a) same
(b) double
(c) half
(d) four times
(e) one­fourth.
Ans: c

75. The force acting along the circumference will cause stress in
the walls in a direction normal to the longitudinal axis of
cylinder; this stress is called
(a) longitudinal stress
(b) hoop stress
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 18/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

(c) yeiled stress

(d) ultimate stress
(e) none of the above.
Ans: b

76. A boiler shell 200 cm diameter and plate thickness 1.5 cm is

subjected to internal pressure of 1.5 MN/m , then the hoop
stress will be
(a) 30 MN/m2
(b) 50 MN/m2
(c) 100 MN/m2
(d) 200 MN/m2
(e) 300 MN/m2.
Ans: c

77. A cylindrical section having no joint is known as

(a) jointless section
(b) homogeneous section
(c) perfect section
(d) manufactured section
(e) seamless section.
Ans: e

78. Longitudinal stress in a thin cylinder is

(a) equal to the hoop stress
(b) twice the hoop stress
(c) half of the hoop stress
(d) one­fourth of hoop stress
(e) four times the hoop stress.
Ans: c

79. The safe twisting moment for a compound shaft is equal to

the
(a) maximum calculated value
(b) minimum calculated value
(c) mean value
(d) extreme value
(e) none of the above.
Ans: b
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 19/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

80. The torsional rigidity of a shaft is expressed by the

(a) maximum torque it can transmit
(b) number of cycles it undergoes before failure
(c) elastic limit up to which it resists torsion, shear and bending
stresses
(d) torque required to produce a twist of one radian per unit
length of shaft
(e) maximum power it can transmit at highest possible­speed.
Ans: d

81. The value of shear stress which is induced in the shaft due to
the applied couple varies
(a) from maximum at the center to zero at the circumference
(b) from zero at the center to maximum at the circumference
(c) from maximum at the center to mini­mum at the
cricumference
(d) from minimum at the centro to maxi­mum at the
circumference
(e) none of the above.
Ans: b

82. A key is subjected to side pressure as well at shearing forces.

These pressures are called
(a) bearing stresses
(b) fatigue stresses
(c) crushing stresses
(d) resultant stresses
(e) none of the above.
Ans: a

83. In a belt drive, the pulley diameter is doubled, the belt

tension and pulley width remaining same. The changes required
in key will be
(a) increase key length
(b) increase key depth
(c) increase key width
(d) double all the dimensions
(e) none of the above.
Ans: c
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 20/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

84. Shear stress induced in a shaft subjected to tension will be

(a) maximum at periphery and zero at center
(b) maximum at center
(c) uniform throughout
(d) average value in center
(e) none of the above.
Ans: e

Download
Free Download Go to unzipper.com

Posted in Mechanical Engineering Multiple Choice

Questions Tagged Interview Questions and Answers pdf free
Download­mcqs­objective type Engineering

← 154 TOP THEORY of 140 TOP MOST ENGINEERING

MACHINES – Mechanical MECHANICS – Mechanical
Engineering Multiple choice Engineering Multiple choice
Questions and Answers Questions and Answers →

12 THOUGHTS ON “84 TOP MOST STRENGTH OF

MATERIALS – MECHANICAL ENGINEERING
MULTIPLE CHOICE QUESTIONS AND ANSWERS”

raju
FEBRUARY 18, 2017 AT 5:41 PM

sir i sincerely request you, please send these

questions and answers to
gmail:[email protected]

REPLY

Md Muzammil
JANUARY 31, 2017 AT 6:33 AM

Very benifitial
Kindly send PDF files of all mechanical subjects

http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 21/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

REPLY

SUMIT MALUSARE
JANUARY 28, 2017 AT 8:02 AM

really helpful.
can you send me pdf of above data.
thanking You

REPLY

Sunil bisht
NOVEMBER 24, 2016 AT 7:25 PM

sir
Please send me pdf of above SOM question
[email protected]…

REPLY

wasim
AUGUST 30, 2016 AT 2:47 AM

very useful, kindly send the pdf of all topics in

mechanical engineering mcq.

REPLY

sai kiran
AUGUST 13, 2016 AT 2:51 PM

Please send me the PDFs of all these subjects please

I request these are beneficial

REPLY

Siva sankar
JULY 6, 2016 AT 11:31 AM

Pdf
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 22/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

REPLY

sachin
JUNE 27, 2016 AT 12:43 PM

this all matter would be quite for me. For this i

request you to kindly send me the pdf file of the
same.

REPLY

Suchitra
APRIL 30, 2016 AT 5:22 AM

Very benifitial
Kindly send PDF files of all mechanical subjects

REPLY

Rakhahari Mandal
APRIL 15, 2016 AT 1:05 PM

Really helpful.. kindly send pdf files of all topics in

Mechanical Engineering.

REPLY

tammana
APRIL 13, 2016 AT 6:22 AM

This is very good matter kindly send pdf file in

mechanical muti choice question

REPLY

Sarath
APRIL 12, 2016 AT 11:34 AM

Really helpful..Kindly send the pdf files of all topics

in Mechanical engineering multiple choice qstns.
http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 23/24
2/28/2017 84 TOP MOST Strength of Materials ­ Mechanical Engineering Multiple choice Questions and Answers Mechanical Engineering Multiple Choice Questions

[email protected]

REPLY

LEAVE A REPLY

Your email address will not be published. Required fields are marked *

Comment

Name *

Email *

Website

Post Comment

Engineering interview questions,multiple choice questions,objective type questions,seminor

topics,lab viva questions and answers ,online quiz test pdf free download for freshers.

Terms & Conditions | Privacy Policy | Contact us | About us

http://engineeringinterviewquestions.com/strength­of­materials­mechanical­engineering­multiple­choice­questions­and­answers/ 24/24