Earthing protection

Contents
Products from CBM Technology compliant
with the PN-EN 62561-2 standard ................................................................................ 3

Vertical rods .................................................................................................................. 4

Conductors .................................................................................................................... 8

Clamps . ........................................................................................................................... 13

Additional accessories ............................................................................................... 16

Index ............................................................................................................................... 19

edycja 1/II/2023 1
 CBM Technology Sp. z o.o. is a manufacturer of earthing protection
systems. Our main products are copper-bonded steel earthing rods, wires
and tapes.

We have been developing our products for many years and therefore we
can offer products which satisfy each and every need of our customers.

Copper-bonded steel earthing rods, wires and tapes have tens of

years corrosion resistance and, in terms of quality and price, they can be
placed between copper products and galvanised steel products.

Our products meet both European and International Standards such as

IEC/EN 62305-3, IEC/EN 62561-1, IEC/EN 62561-2, HD 60364-5-54, EN 50522.

From its very beginning, the company’s main aim was to improve quali-
ty of its products and provide its customers with wide technical support.
This can be achieved thanks to the combination of long-standing experien-
ce and innovation introduced by young engineers.

2 www.dobreuziomy.pl
 Products from CBM Technology

Products from CBM Technology

compliant with the PN-EN 62561-2
standard
DE
MA
We are a manufacturer of copper-bonded steel rods, in D
N
tape and wire with technical parameters accordance with
O LA
the PN-EN 62561-2 Standard. P

Steel copper-bonded tape and

wire (St/Cu) and steel copper-bonded
tinned tape and steel copper-bonded
tinned wire (St/Cu/Sn)
The min. 0.070 mm thick copper coating provides
effective corrosion resistance for dozens of years,
whereas the tinned coating makes it possible for our
products to be used in slightly acid and acid soil,
also maintaining the corrosion resistance for dozens
of years.

Vertical copper-bonded forged

rod with sealing-strengthening
bush and threaded rod
connected with a coupling
The 0.250 mm thick copper coating is wear
resistant and it provides effective corrosion
resistance for dozens of years.

The significance of the copper coating thickness

The 0.250 mm thick copper coating on steel with a nickel sub-layer ensures the tens of years corrosion resi-
stance in soil environment of copper-bonded earthing rods. The nickel sub-layer provides molecular connection
of copper and steel and ensures the adherence and plasticity required under the PN-EN 62561-2 standard. The
coating thickness plays the vital role in ensuring the tens of years corrosion resistance. During the process of
driving the rod into the ground, the copper layer is exposed to the risk of scuffing but the excellent
adherence to steel through the nickel sub-layer prevents the detachment of the coating from the steel core.
The thickness of the copper coating, which is softer that nickel, may be reduced, however, the copper coating
will always remain at least 0.150 mm thick.
Therefore, the industry standards provide for 0.250 mm copper coating in earthing rods and at least min.
0.070 mm in tapes and wires. Unlike earthing rods, tapes and wires are not exposed to mechanical damage
during the installation in the ground. The 0.070 mm copper coating on the steel tape considerably decreases
its resistivity, which makes it possible to use steel tapes of considerably smaller dimensions in facilities where
earth fault currents occur. However, CBM Technology offers an additional tin coating (Sn) covering the copper
coating so that our products can be used in acid soil and slightly acid soil.

www.dobreuziomy.pl 3
Vertical rods

Vertical rods

Vertical copper-bonded forged rod

with sealing-strengthening bush
The 99.9% pure electrolytic copper bonded onto a drawn steel to
a thickness of min 0.250 mm forms molecular and inseparable connection
with the steel. The steel core has a high tensile strength of 600 N/mm2.
One end of the rod has decreased diameter by cold pressed this
guarantees the same thickness of the copper layer on the whole length
of the rod. The other end has a hole which enables the connection
between the rods to increase the length.
The connection of the rods is protected by sealing bush made of
stainless steel which provides additional mechanical strength to the
connection. The rod pin is made by cold pressed this hardened the
end of rod. Therefore there is no need to use the tip. Connection of
the rods complies with the requirements of IEC/EN 62561-2 „Lightning
protection components (LPSC). Requirements for conductors and earth
electrodes”. To drive the rod into the ground, the driving stud and tup for
mechanical driving or tup for hand driving must be used.

The sealing bush advantage

– sealing the pin-feather key connection,
– strengthening the mechanical connection
Cat. no. Diameter of rod Length* Material
mm m
C0000172 14.2 1.2 steel copper-bonded to
C0000175 14.2 1.5 thickness of 0.250 mm,
C0000195 16.0 1.5 sealing-strengthening steel
C0000185 17.2 1.5 bush

* for special orders we supply different rod lengths up to 3 m

4 www.dobreuziomy.pl
 Vertical rods

Driving stud for forged rod

Driving stud is to transfer the vibrations from the tup to earth rod. It
should be placed in the feather key of the rod and should be imbeded
with the hammer
Cat. no. Diameter of rod Material
mm
C1080375 14.2
C1080395 16.0 steel
C1080385 17.2

The driving stud stabilizer to embed

forged rods
The driving stud stabilizer makes it possible for the driving stud to be stroke
centrally in the forged rod core when grounding
Cat. no. Diameter of rod Material
mm
C1070375 14.2
C1070395 16.0 teflon
C1070385 17.2

Tup for forged rod

Tup for forged rod transfers vibrations from the percussive hammer or hand Cat. no. C1090375
Cat. no. C1090385
hammer onto earth rod core through the driving stud placed in the fe-
Cat. no. C1090376
ather key of the rod Cat. no. C1090386
Cat. no. Diameter of rod Application
mm
for mechanical driving using hammers
C1090375
with SDS-Max fastening
C1090376 14.2; 16.0 for hand driving
for mechanical driving with Hilti TE 905
C1090377
and TE 1000
for mechanical driving using hammers
C1090385
with SDS-Max fastening
C1090386 17.2 for hand driving
Cat. no. C1090377
for mechanical driving with Hilti TE 905 Cat. no. C1090387
C1090387
and TE 1000

www.dobreuziomy.pl 5
Vertical rods

Vertical copper-bonded earth

rod/grounding rod
They are made of molecularly bonded 99.9% pure electrolytic copper
onto a low carbon steel core. The steel core is a bar drawn to the requ-
ired diameter. The rods are highly resistant to corrosion and because
the steel used has a high tensile strength 600 N/mm2, they can be dri-
ven by vibrohammers to great depths.
The copper jacket is 0.250 mm thick at all points and it ensures a lifeti-
me for tens years.
The threads at the tips of a rod are rolled after copper bonding process,
and both steel and copper are rolled into the thread, making it extremely
strong. Connection of the rods using threaded coupling complies with
the requirements of IEC/EN 62561-2 „Lightning protection components
(LPSC). Requirements for conductors and earth electrodes”.
Cat. no. Type of Diameter Length Rod Material
thread of rod of thread length*
inch mm mm feet m
C1000111 4 1.2
C1000112 5 1.5
C1000113 5/8 UNC 14.2 24 6 1.8 steel
C1000114 8 2.4 copper-bonded
to thickness
C1000115 10 3
of 0.250 mm,
C1000121 4 1.2
sealing-streng-
C1000122 5 1.5 thening steel
C1000123 3/4 UNC 17.2 30 6 1.8 bush
C1000124 8 2.4
C1000125 10 3

* for special orders we supply different rod lengths up to 3 m

Threaded coupling
Threaded coupling with counted bore for protecting the rod threads from
damage
Cat. no. Type of thread Material
inch
C1040302/60 5/8 UNC
brass
C1040303/72 3/4 UNC

6 www.dobreuziomy.pl
 Vertical rods

Driving head
Suitable for both manual and power hammering. Can be re-used for many
times
Cat. no. Type of thread Material
inch
C1080302 5/8 UNC
steel
C1080303 3/4 UNC

Tip
Pointed hardened steel tip
Cat. no. Type of thread Material
inch
C1060302 5/8 UNC
steel
C1060303 3/4 UNC

Tup for threaded copper-bonded

earth rod
Tup is to carry percussive hammer oscillations on driving head for threaded
copper-bonded earth rod (for hammers with SDS-Max fitting only)
Cat. no. Tup for driving head with Kind of driving head
thread type
inch
C1090301 5/8; 3/4 UNC with a hole

www.dobreuziomy.pl 7
Conductors

Conductors

Copper-bonded steel tape 3 mm thick

Steel tape is molecularly bonded in electrolytic process with copper of
thickness 0.070 mm. Copper coating protects against corrosion for the
tens of years.
Sale unit is kilogram, the tolerance of weight ± 5%.
The tape width tolerance is ± 1 mm
Cat. no. XxY Length Material
mm m
C1100272(60M) 20 x 3 60
steel copper-bonded to
C1100273(40M) 25 x 3 40
thickness of Cu 0.070 mm
C1100279(40M) 30 x 3 40

Tap R=1
e 5
3m
Bending instruction m R
=15
According to PN/EN 62561-2 standard, the tape may be bent at
a maximum angle of 90º ± 5° and the bending radius should be equal to x.
90
O

ma
five times the thickness of the tape ± 1 mm. ang
le
ing
nd
Be

For 3 mm tape, the bending radius should not be less than 15 mm.

Tinned copper-bonded steel tape

3 mm thick
Steel tape is molecularly bonded in electrolytic process with copper of
thickness 0.070 mm and tin. Tin protective coating increases the corro-
sion resistance in every kind of agresive soil and also protects against
theft.
Sale unit is kilogram, the tolerance of weight ± 5%.
The tape width tolerance is ± 1 mm
Cat. no. XxY Length Material
mm m
C1100291(60M) 20 x 3 60 tinned copper-bonded
C1100292(40M) 25 x 3 40 steel, copper thickness
R=1
C1100294(40M) 30 x 3 40 min. 0.070 mm
Tap 5
e 25x
3 R=1
Bending instruction 5
According to PN/EN 62561-2 standard, the tape may be bent at O
90
x.
a maximum angle of 90º ± 5° and the bending radius should be equal to em
a
gl
an
five times the thickness of the tape ± 1 mm. d ing
B en

For 3 mm tape, the bending radius should not be less than 15 mm.

8 www.dobreuziomy.pl
 Conductors

Copper-bonded steel tape 4 mm thick

Steel tape is molecularly bonded in electrolytic process with copper of
thickness 0.070 mm. Copper coating protects against corrosion for the
tens of years.
Sale unit is kilogram, the tolerance of weight ± 5%.
The tape width tolerance is ± 1 mm
Cat. no. XxY Length Material
mm m
C1100274(30M) 25 x 4 30
C1100275(25M) 30 x 4 25 steel copper-bonded to
C1100275(30M) 30 x 4 30 thickness of Cu 0.070 mm
R=2
C1100281(20M) 40 x 4 20 Tap 0
e 4m
m
Bending instruction

R=
20
According to PN/EN 62561-2 standard, the tape may be bent at O
0
a maximum angle of 90º ± 5° and the bending radius should be equal to x.9
ma
le
ng
five times the thickness of the tape ± 1 mm. in ga
nd
Be

For 4 mm tape, the bending radius should not be less than 20 mm.

Tinned copper-bonded steel tape

4 mm thick
Steel tape is molecularly bonded in electrolytic process with copper of
thickness 0.070 mm and tin. Tin protective coating increases the corro-
sion resistance in every kind of agresive soil and also protects against
theft.
Sale unit is kilogram, the tolerance of weight ± 5%.
The tape width tolerance is ± 1 mm
Cat. no. XxY Length Material
mm m
C1100293(30M) 25 x 4 30
tinned copper-bonded
C1100295(25M) 30 x 4 25
steel, copper thickness
C1100295(30M) 30 x 4 30 R=2
C1100296(20M) 40 x 4 20
min. 0.070 mm
Tap
0
e 25x
4
R=

Bending instruction
20

According to PN/EN 62561-2 standard, the tape may be bent at O

90
a maximum angle of 90º ± 5° and the bending radius should be equal to a x.
gl em
an
five times the thickness of the tape ± 1 mm. d ing
Ben

For 4 mm tape, the bending radius should not be less than 20 mm.

www.dobreuziomy.pl 9
Conductors

Copper-bonded steel tape 5 mm thick

Steel tape is molecularly bonded in electrolytic process with copper of
thickness 0.070 mm. Copper coating protects against corrosion for the
tens of years.
Sale unit is kilogram, the tolerance of weight ± 5%.
The tape width tolerance is ± 1 mm
Cat. no. XxY Length Material
mm m
steel copper-bonded to
C1100283(20M) 40 x 5 20
thickness of Cu 0.070 mm

Tap R=2
Bending instruction e5
mm 5
According to PN/EN 62561-2 standard, the tape may be bent at

R=
25
a maximum angle of 90º ± 5° and the bending radius should be equal to O
90
x.
five times the thickness of the tape ± 1 mm. ng
le
ma
a
ing
nd
Be

For 5 mm tape, the bending radius should not be less than 25 mm.

Tinned copper-bonded steel tape

5 mm thick
Steel tape is molecularly bonded in electrolytic process with copper of
thickness 0.070 mm and tin. Tin protective coating increases the corro-
sion resistance in every kind of agresive soil and also protects against
theft.
Sale unit is kilogram, the tolerance of weight ± 5%.
The tape width tolerance is ± 1 mm
Cat. no. XxY Length Material
mm m
tinned copper-bonded
C1100284(20M) 40 x 5 20 steel, copper thickness
Be R=2
min. 0.070 mm dn
ark
a5 5
mm
R=

Bending instruction
25

According to PN/EN 62561-2 standard, the tape may be bent at 0

O

x .9
a maximum angle of 90º ± 5° and the bending radius should be equal to ia
ma
an
five times the thickness of the tape ± 1 mm. z gin
K ąt

For 5 mm tape, the bending radius should not be less than 25 mm.

10 www.dobreuziomy.pl
 Conductors

Copper-bonded steel wire Ø 8 mm

Steel wire is molecularly bonded in electrolytic process with copper of
thickness 0.070 mm. Copper coating protects against corrosion for the
tens of years.
Sale unit is kilogram, the tolerance of weight ± 5%
Cat. no. Diameter Length Material
mm m
C1110249 ∅8 acc. to order
C1110249(20M) ∅8 20 steel copper-bonded
C1110249(60M) ∅8 60 to thickness of 0.070 mm
C1110249(80M) ∅8 80
steel copper-bonded to Wi
re
C1110249C250 ∅8 acc. to order Ø8
mm
thickness of 0.250 mm

R
Bending instruction

=4
0
According to PN/EN 62561-2 standard, the wire may be bent at
a maximum angle of 90º ± 5° and the bending radius should be equal to
five times the thickness of the wire ± 1 mm.

For 8 mm wire, the bending radius should not be less than 40 mm.

Tinned copper-bonded steel wire

Ø 8 mm
Steel wire is molecularly bonded in electrolytic process with copper of
thickness 0.070 mm and tin. Tin protective coating increases the corro-
sion resistance in every kind of agresive soil and also protects against
theft.
Sale unit is kilogram, the tolerance of weight ± 5%
Cat. no. Diameter Length Material
mm m
C1110280 ∅8 acc. to order
tinned copper-bonded
C1110280(20M) ∅8 20
steel, copper thickness
C1110280(60M) ∅8 60
min. 0.070 mm
C1110280(80M) ∅8 80 Wir
eØ
8m
m

Bending instruction
R
=4

According to PN/EN 62561-2 standard, the wire may be bent at

0

a maximum angle of 90º ± 5° and the bending radius should be equal to

five times the thickness of the wire ± 1 mm.

For 8 mm wire, the bending radius should not be less than 40 mm.

www.dobreuziomy.pl 11
Conductors

Copper-bonded steel wire Ø 10 mm

Steel wire is molecularly bonded in electrolytic process with copper of
thickness 0.070 mm. Copper coating protects against corrosion for the
tens of years.
Sale unit is kilogram, the tolerance of weight ± 5%
Cat. no. Diameter Length Material
mm m
C1110250 ∅ 10 acc. to order
steel copper-bonded
C1110250(20M) ∅ 10 20
to thickness of 0.070 mm
C1110250(50M) ∅ 10 50 Wir
eØ
10
mm
Bending instruction

R
According to PN/EN 62561-2 standard, the wire may be bent at

=5
0
a maximum angle of 90º ± 5° and the bending radius should be equal to
five times the thickness of the wire ± 1 mm.

For 10 mm wire, the bending radius should not be less than 50 mm.

Tinned copper-bonded steel wire

Ø 10 mm
Steel wire is molecularly bonded in electrolytic process with copper of
thickness 0.070 mm and tin. Tin protective coating increases the corro-
sion resistance in every kind of agresive soil and also protects against
theft.
Sale unit is kilogram, the tolerance of weight ± 5%
Cat. no. Diameter Length Material
mm m
C1110281 ∅ 10 acc. to order tinned copper-bonded
C1110281(20M) ∅ 10 20 steel, copper thickness
C1110281(50M) ∅ 10 50 min. 0.070 mm
Wir
eØ
10
mm

Bending instruction
R
=5

According to PN/EN 62561-2 standard, the wire may be bent at

0

a maximum angle of 90º ± 5° and the bending radius should be equal to

five times the thickness of the wire ± 1 mm.

For 10 mm wire, the bending radius should not be less than 50 mm.

12 www.dobreuziomy.pl
Clamps

Cruciform clamps
Cruciform clamp with M10 bolts
Cruciform clamp – profile, bolted M10 with stainless steel separator, to
connect rod to galvanized tape or circular conductor (with stainless ste-
el separator inside protecting from corrosion between copper and zinc
when different metals are connected)
Cat. no. Dimensions Material
rod St/Cu tape wire/cable
mm mm mm2
C1030432N 14.2; 16.0 ≤ 40 28-78 stainless steel 2 mm,
stainless steel bolts
C1030433N 17.2 ≤ 40 28-78 M10

Cruciform clamp with M8 bolts

Cruciform clamp – profile, bolted M8 with stainless steel separator, to
connect rod to galvanized tape or circular conductor (with stainless ste-
el separator inside protecting from corrosion between copper and zinc
when different metals are connected)
Cat. no. Dimensions Material
rod St/Cu tape wire/cable
mm mm mm2
C1030495N 14.2; 16.0 ≤ 40 28-78 stainless steel 2 mm,
stainless steel bolts
C1030496N 17.2 ≤ 40 28-78 M8

Terminal clamp
Terminal clamp – flat, bolted 2 x M10, with stainless steel separator inside,
enables to connect rod to tape. Stainless steel separator inside protects
from corrosion between copper and zinc when different metals are con-
nected
Cat. no. Dimensions Material
rod St/Cu tape
mm mm
C1030472N 14.2; 16.0 ≤ 40 stainless steel 2 mm,
stainless steel bolts
C1030473N 17.2 ≤ 40 M10

www.dobreuziomy.pl 13
Clamps

Skew clamps
Skew clamp universal
Skew clamp universal, with stainless steel separator, to connect rod to
tape or circular conductor (with stainless steel separator inside protec-
ting from corrosion between copper and zinc when different metals are
connected)
Cat. no. Dimensions Material
rod tape parallel wire/cable
St/Cu or squarely parallel or
to rod squarely to rod
mm mm mm2

C1030428N 14.2; 16.0 ≤ 30 28-78 stainless steel

2 mm, stainless
C1030429N 17.2 ≤ 30 28-78 steel bolts M8

Skew clamp rod to tape

Skew clamp, with stainless steel separator, to connect rod to tape paral-
lel or squarely. Clamp ensures good contact of rod and tape
Cat. no. Dimensions Material
rod St/Cu tape parallel or
squarely to rod
mm mm
C1030478N 14.2; 16.0 ≤ 40 stainless steel
2 mm, stainless
C1030479N 17.2 ≤ 40 steel bolts M8

Cruciform clamps
Cruciform clamp with M10 bolts
Cruciform clamp to connect conductor to conductor, bolted M10. Clamp
enabling connection of two conductors
Cat. no. Dimensions Material
tape St/Cu wire
mm mm2
stainless steel
C1030442N ≤ 40 28-78 2 mm, stainless
steel bolts M10

14 www.dobreuziomy.pl
 Clamps

Cruciform clamp with M8 bolts

Cruciform clamp to connect conductor to conductor, bolted M8. Clamp
enabling connection of two conductors
Cat. no. Dimensions Material
tape St/Cu wire
mm mm2
stainless steel
C1030405N ≤ 40 28-78 2 mm, stainless
steel bolts M8

Skew clamps
Skew clamp – tape to wire
Skew clamp universal to connect rod to tape or circular conductor (with
stainless steel separator inside protecting from corrosion between cop-
per and zinc when different metals are connected)
Cat. no. Dimensions Material
tape St/Cu wire
mm mm2
stainless steel
C1030430N ≤ 40 28-78 2 mm, stainless
steel bolts M8

Skew clamp – tape to tape

Skew clamp, flat, to connect tape with tape, bolted 2 x M8
Cat. no. Dimensions Material
tape St/Cu tape
mm mm
stainless steel
C1030431N ≤ 40 ≤ 40 2 mm, stainless
steel bolts M8

www.dobreuziomy.pl 15
Additional accessories

Inspection pits
Enable to control rod – earthing conductor connections with no pro-
blems as well as to make time earth resistance measurements.
Pit C1140304 can be mounted in different kind of hardened surfaces
(recommended for areas with setts because of specially designed rein-
Cat. no. C1140302
forced flange). Pit C1140302 can be mounted in surfaces hardened with
concrete or asphalt
Cat. no. Dimensions Material
length x width x height x depth
mm
C1140302 258 x 258 x 215 x 160 plastic pit with hardened Cat. no. C1140304
C1140304 260 x 215 x 210 x 110 cover

Inspection pit earth bar for plastic

pits C1140302 and C1140304
Pits number: C1140302 and C1140304 can be equipped with equipo-
tential earth bar enables connection of five bus bars (tapes) of max.
Cat. no. C1140306
size 30 x 4 mm. Earth bar fit into the slots provided in the inspection pit.

Lubricating medium for couplings of

threaded earthing rods
It is used for additional protection of contacts inside coupling. When
connecting rods with coupling, we recommend to pour little paste into
coupling.
It can also be used as lubricating medium for driving stud making it easy Cat. no. C1130301
to screw it out.

Protective sleeve
A protective sleeve used to protect against electrochemical corrosion
a fragment of the tape coming out of the ground and connected to the Cat. no. C1030358
grounded object.

16 www.dobreuziomy.pl
 Additional accessories

Insulating tape for wrapping

underground joints
Insulating tape protects underground connections from soil and electro-
chemical corrosion
Cat. no. Width Length
mm m
C1030355 30 10
C1030356 50 10

CBM Resistivity
CBM Resistivity is fine powder which increases surface area of earth
electrode thus reducing resistance to earth.
It is being sold in the bags of 25 kg each.

preparation
Before using it needs to be mixed with Portland cement before using in
following proportion:
CBM Resistivity : cement Cat. no. C1070302

3 : 1

CBM Discharge Counter

Lightning strike counter LSC-01 is a unit dedicated to mount on down-
conductors of lightning protection system in order to indicate and record
time of direct lightning strike to the structure.

Advantages: Application:
– tested in accordance with – radiocommunication towers
PN-EN 62561-6:2011 – industrial buildings
– maximum withstand dischar- – energy buildings
ge current 100 kA 10/350 μs – residential construction
– registration of the number and
time of discharges
– easy assembly
– battery powered Cat. no. C2000350
– small dimensions

www.dobreuziomy.pl 17
 www.cbm-weld.pl

18 www.dobreuziomy.pl
 Index

Cat. no. Page Cat. no. Page

C0000172 4 C1090377 5
C0000175 4 C1090385 5
C0000185 4 C1090386 5
C0000195 4 C1090387 5
C1000111 6 C1100272(60M) 8
C1000112 6 C1100273(40M) 8
C1000113 6 C1100274(30M) 9
C1000114 6 C1100275(25M) 9
C1000115 6 C1100275(30M) 9
C1000121 6 C1100279(40M) 8
C1000122 6 C1100281(20M) 9
C1000123 6 C1100283(20M) 10
C1000124 6 C1100284(20M) 10
C1000125 6 C1100291(60M) 8
C1030355 17 C1100292(40M) 8
C1030356 17 C1100293(30M) 9
C1030358 16 C1100294(40M) 8
C1030405N 15 C1100295(25M) 9
C1030428N 14 C1100295(30M) 9
C1030429N 14 C1100296(20M) 9
C1030430N 15 C1110249 11
C1030431N 15 C1110249(20M) 11
C1030432N 13 C1110249(60M) 11
C1030433N 13 C1110249(80M) 11
C1030442N 14 C1110249C250 11
C1030472N 13 C1110250 12
C1030473N 13 C1110250(20M) 12
C1030478N 14 C1110250(50M) 12
C1030479N 14 C1110280 11
C1030495N 13 C1110280(20M) 11
C1030496N 13 C1110280(60M) 11
C1040302/60 6 C1110280(80M) 11
C1040303/72 6 C1110281 12
C1060302 7 C1110281(20M) 12
C1060303 7 C1110281(50M) 12
C1070302 17 C1130301 16
C1070375 5 C1140302 16
C1070385 5 C1140304 16
C1070395 5 C1140306 16
C1080302 7 C2000350 17
C1080303 7
C1080375 5
C1080385 5
C1080395 5
C1090301 7
C1090375 5
C1090376 5

www.dobreuziomy.pl 19