Scribd
Upload
957 views

18CV72 - Design of RCC and Steel Notes

This document provides information about a course on the design of reinforced concrete and steel structures. The course aims to provide knowledge in limit state design and concepts. Students will learn to design structural elements like footings, retaining walls, water tanks, and portal frames. They will also learn to design steel structures including roof trusses, plate girders, and gantry girders. The course outcomes are that students will acquire basic knowledge in design of RC and steel structures and have the ability to follow codal provisions to arrive at safe structural designs. Students will be assessed through a question paper testing their knowledge of the design of elements covered in the two modules.

Uploaded by

yk3372013
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
957 views

18CV72 - Design of RCC and Steel Notes

This document provides information about a course on the design of reinforced concrete and steel structures. The course aims to provide knowledge in limit state design and concepts. Students will learn to design structural elements like footings, retaining walls, water tanks, and portal frames. They will also learn to design steel structures including roof trusses, plate girders, and gantry girders. The course outcomes are that students will acquire basic knowledge in design of RC and steel structures and have the ability to follow codal provisions to arrive at safe structural designs. Students will be assessed through a question paper testing their knowledge of the design of elements covered in the two modules.

Uploaded by

yk3372013
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 259

B. E.

CIVIL ENGINEERING
Choice Based Credit System (CBCS) and Outcome Based Education (OBE)
SEMESTER - VII
DESIGN OF RCC AND STEEL STRUCTURES
Course Code 18CV72 CIE Marks 40
Teaching Hours/Week(L:T:P) (3:0:0) SEE Marks 60
Credits 03 Exam Hours 03

Course Learning Objectives: This course will enable students to


1. Provide basic knowledge in the areas of limit state method and concept of design of RC and Steel
structures
2. Identify, formulate and solve engineering problems in RC and Steel Structures
3. Give procedural knowledge to design a system, component or process as per needs and specifications of
RC Structures like Retaining wall, Footing, Water tanks, Portal Frames and Steel Structures like Roof
Truss, Plate Girder and Gantry Girder.
4. Imbibe the culture of professional and ethical responsibilities by following codal provisions in the
analysis, design of RC and Steel Structures.
5. Provide factual knowledge on analysis and design of RC Structural elements, who can participate and
succeed in competitive examinations.
Module -1
Footings: Design of rectangular slab, slab-beam type combined footing.
Retaining Walls: Design of cantilever Retaining wall and counter fort retaining wall.
Water Tanks: Design of circular water tanks resting on ground (Rigid and Flexible base). Design of
rectangular water tanks resting on ground. As per IS: 3370 (Part IV).
Design of portal frames with fixed and hinged based supports.
Module -2
Roof Truss: Design of roof truss for different cases of loading, forces in members to given.
Plate Girder: Design of welded plate girder with intermediate stiffener, bearing stiffener and necessary
checks
Gantry Girder: Design of gantry girder with all necessary checks.
Course Outcomes: After studying this course, students will be able to:
1. Students will acquire the basic knowledge in design of RCC and Steel Structures.
2. Students will have the ability to follow design procedures as per codal provisions and skills to arrive at
structurally safe RC and Steel members.
Question Paper Pattern:
 Two questions shall be asked from each module. There can be maximum of three subdivisions in each
question, if necessary.
 One full question should be answered from each module.
 Each question carries 50 marks.
 Code books – IS 456, IS 800, IS 3370 (Part IV), SP-16, SP (6) – Steel Tables, shall be referred for
designing. The same will be provided during examination.
Textbooks:
1. N Krishna Raju, “Structural Design and Drawing of Reinforced Concrete and Steel”, University Press
2. Subramanian N, “Design of Steel Structures”, Oxford university Press, New Delhi
3. K S Duggal, “Design of Steel Structures”, Tata McGraw Hill, New Delhi
Reference Books:
1. Charles E Salman, Johnson & Mathas, “Steel Structure Design and Behavior”, Pearson Publications
2. Nether Cot, et.al, “Behavior and Design of Steel Structures to EC -III”, CRC Press
3. P C Verghese, “Limit State Design of Reinforced Concrete”, PHI Publications, New Delhi
4. S N Sinha, “Reinforced Concrete Design”, McGraw Hill Publication

You might also like