Scribd
Upload
141 views2 pages

200x600 Beam Design Reinf

This document provides a summary of the beam reinforcement design for a beam with a width of 200 mm and height of 600 mm. It includes bending and shear/torsion design details such as the moment and shear values along the beam, calculation of required and supplied steel reinforcement areas at the top and bottom edges, and specification of steel bar sizes used. Deflection checks and material properties are also summarized. The beam is divided into 6 sections for analysis and reinforcement is designed to meet code requirements.

Uploaded by

michael
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
141 views2 pages

200x600 Beam Design Reinf

This document provides a summary of the beam reinforcement design for a beam with a width of 200 mm and height of 600 mm. It includes bending and shear/torsion design details such as the moment and shear values along the beam, calculation of required and supplied steel reinforcement areas at the top and bottom edges, and specification of steel bar sizes used. Deflection checks and material properties are also summarized. The beam is divided into 6 sections for analysis and reinforcement is designed to meet code requirements.

Uploaded by

michael
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

JRDVQDEYJBHRX5CV (Fenerbahce_Do Not Use COMMERCIAL)

Beam Reinforcement Design Calc. By:


Rev: 1 Checked By:

Beam Reinforcement Design


Axis: M Storey: 1
Materials: C25/30 / Grade 460 (Type 2) (Links: Grade 250 (Plain)) Concrete Cover: 25.0 mm

Diagrams

Bending
1B55 L= 1340mm 1B56 L= 3950mm
Bw x H (mm) 200 x 600 200 x 600
Flange Bf x
Hf
--- ---
(Left)
(Right)
Top Edge
M (kN.m) 13.4 38.1 61.4 61.5 13.9 0.1
d (mm) 559.0 559.0 559.0 559.0 559.0 559.0
K/K' 0.05 0.13 0.21 0.21 0.05 0.00
x (mm) 62.1 62.1 62.1 62.1 62.1 62.1
As (mm2) 63.15 179.59 289.20 289.31 65.56 0.31
As' (mm2) 0.00 0.00 0.00 0.00 0.00 0.00
As,min (mm2) 177.12 177.12 177.12 177.12 177.12 177.12
Bottom Edge
M (kN.m) 0.1 0.0 0.0 0.0 25.6 18.6
d (mm) 559.0 559.0 559.0 559.0 559.0 559.0
K/K' 0.00 0.00 0.00 0.00 0.09 0.06
x (mm) 62.1 62.1 62.1 62.1 62.1 62.1
As (mm2) 0.49 0.00 0.00 0.00 120.38 87.40
As' (mm2) 0.00 0.00 0.00 0.00 0.00 0.00
As,min (mm2) 177.12 177.12 177.12 177.12 177.12 177.12

Shear And Torsion Design


Vd (kN) 40.4 57.1 56.6 31.5
v (MPa) 0.36 0.51 0.51 0.28
vc (MPa) 0.44 0.44 0.44 0.44
vMax (MPa) 4.38 4.38 4.38 4.38
Vnom (kN) 100.8 100.8
Td (kN.m) 0.0 0.1
vt (MPa) 0.00 0.00
vt,min (MPa) 0.00 0.00
bsupport (mm) 0.0 0.0 0.0 0.0
Links 1R8-250 1R8-250 1R8-250 1R8-250 1R8-250 1R8-250

Deflection Check
7.07 ≤
L/d ---
57.57 √

Steel Areas (mm2)

ProtaStructure v5.1.252 Page 1


JRDVQDEYJBHRX5CV (Fenerbahce_Do Not Use COMMERCIAL)
Beam Reinforcement Design Calc. By:
Rev: 1 Checked By:

Required
Top Edge 63.15 179.59 289.20 289.31 65.56 0.31
Bottom Edge 0.49 0.00 0.00 0.00 120.38 87.40
Supplied
Top Edge 402.12 402.12 402.12 402.12 402.12 402.12
Bottom Edge 402.12 402.12 402.12 402.12 402.12 402.12
Steel Bars
Top Bars 2T16 2T16
Top.Sup.Bars 2T16 2T16
Top.Sup.Bars
Bottom Bars 2T16 2T16
Bottom Bars
Bot.Sup.Bars
Side Bars

ProtaStructure v5.1.252 Page 2

You might also like