12

CHAPTER AT A GLANCE

Human ear is not in the Syllabus

Sound
(i) The sensation felt by our ears is called sound.
(ii) Sound is a form of energy which makes us hear.

Compiled by
58
Animesh
 (iii) Law of conservation of energy is also applicable to sound.
(iv) Sound travels in form of wave.
Production of Sound
Sound is produced when object vibrates or sound is produced by vibrating
objects.
• The energy required to make an object vibrate and produce sound is
provided by some outside source (like our hand, wind etc.).
• Example : Sound of our voice is produced by vibration of two vocal
cords in our throat [Fig. (a)].
• Sound of a drum or tabla is produced by vibration of its membrane
when struck [Fig. (b)].

• In laboratory experiments, sound is produced by vibrating tuning fork.

The vibrations of tuning fork can be shown by touching a small
suspended pith ball (cork ball) with a prong of the sounding tuning
fork. The pith ball is pushed away with a great force.

Sound can be produced by following methods :

(i) By vibrating string (sitar)
(ii) By vibrating air (flute)
Compiled by
Animesh
 (iii) By vibrating membrane (table, drum)
(iv) By vibrating plates (bicycle bell)
(v) By friction in objects
(vi) By scratching or scrubbing the objects etc.
Propogation of Sound
• The substance through which sound travels is called a medium.
• The medium may be solid, liquid or gas.
• When an object vibrates, then the air particles around it also start
vibrating in exactly the same way and displaced from their stable
position.
• These vibrating air particles exert a force on nearby air particles so they
are also displaced from their rest position and start to vibrate.
• This process is continued in the medium till sound reaches our ears.
• The disturbance produced by sound travels through the medium (not
the particles of the medium).
• Wave is a disturbance which travels through a medium and carries
energy.
• So sound travels in wave form known as mechanical waves.

Sound Waves are Longitudinal Waves

• When a body vibrates then it compresses the air surrounding it and
form a area of high density called compression (C).
• Compression is the part of wave in which particles of the medium are
closer to one another forming high pressure.
• This compression move away from the vibrating body.
• When vibrating body vibrates back a area of low pressure is formed
called rarefaction (R).
• Rarefaction is the area of wave in which particles of the medium are
further apart from one another forming a low pressure or low density
area.

Compiled by
Animesh
 • When body vibrates back and forth, a series of compression and
rarefaction is formed in air resulting in sound wave.
• Propogation of sound wave is propogation of density change.

Sound needs Medium for Propogation

• Sound waves are mechanical waves.
• It needs material medium for propogation like air, water, steel etc.
• It cannot travel in vaccum.
• An electric bell is suspended in airtight bell jar connected with vacuum
pump.
• When bell jar is full of air, we hear the sound but when air is pumped
out from the bell jar by vacuum pump and we ring the bell, no sound is
heard.
• So medium is necessary for propagation of sound.

Compiled by
Animesh

Experiment to show that sound cannot travel through vacuum

Sound Waves are Longitudinal Waves
(i) A wave in which the particles of the medium vibrate back and forth in
the same direction in which the wave is moving, is called a longitudinal
wave.
• When we push and pull the slinky compression (number of turns
are more or closer) and rarefaction (number of turns are less or
 farther) are formed.
• When a wave travels along with slinky, its each turn moves back
and forth by only a small distance in the direction of wave. So the
wave is longitudinal.
• The direction of vibrations of the particles is parallel to the direction
of wave.

(ii) When one end of a slinky is moved up and down rapidly whose other
end is fixed, it produces transverse wave.
• This wave possess along the slinky in horizontal direction, while
turns of slinky (particles) vibrate up and down at right angle to the
direction of wave.
• Thus in transverse wave particles of the medium vibrate up and
down at right angles to the direction of wave.
• Light waves are transverse waves but they don’t need a material
medium for propagation.

Characteristics of Sound Wave

The characteristics of sound waves are : wavelength, frequency, amplitude, time
period and velocity.
• When a wave travel in air the density and pressure of air changes from
their mean position.
• Compression is shown by crest while rarefaction is shown by trough.
• Compression is the region of maximum density or pressure.
• Rarefaction is the region of minimum density or pressure.
(i) Wavelength :
(a) In sound waves the combined length of a compression and an adjacent
rarefaction is called its wavelength.
(b) The distance between the centres of two consecutive compressions or
two consecutive rarefactions is also called its wavelength.
(c) It is denoted by the Greek letter lamda λ. Its SI unit is metre.

(ii) Frequency :
(a) No. of complete waves produced in one second or number of vibrations
per second is called frequency.
(b) Number of compressions or rarefactions passed in one second is also
frequency.
• Frequency of wave is same as the frequency of the vibrating body
which produces the wave.
• The SI unit of frequency is hertz (Hz). The symbol of frequency is
v (nu).
• 1 Hertz : One Hz is equal to 1 vibration per second.
• Bigger unit of frequency is kilohertz kHz = 1000 Hz.
(iii) Time Period :
(a) Time taken to complete one vibration is called time period.
(b) Time required to pass two consecutive compressions or rarefactions
through a point is called time period.
• SI unit of time period is second (s). Time period is denoted by T.
• The frequency of a wave is the reciprocal of the time period.
1
v=
T
(iv) Amplitude :
The maximum displacement of the particle of the medium from their original
undisturbed position is called amplitude of the wave.
• Amplitude is denoted by A and its SI unit is metre (m).
Sound have characteristics like pitch and loudness and timbre.
Pitch : The pitch of sound depends on the frequency of sound (vibration). It
is directly proportional to its frequency. Greater the frequency, higher is the pitch
and lesser the frequency, lower is the pitch.
• A woman’s voice is shrill having a high pitch while a man’s voice
is flat having low pitch.
• High pitch sound has large number of compressions and rarefactions
passing a fixed point per unit time.

Loudness : The loudness depends on the amplitude of the sound wave.

• Loudness is the measure of the sound energy reaching the ear
per sec.
• Greater the amplitude of sound wave, greater is the energy, louder
the sound; short is the amplitude, less is the energy, soft is the
sound.
• Loudness is measured in decibel ‘dB’.
 Quality or Timbre : The timbre of a sound depends on the shape of sound
wave produced by it. It is the characteristic of musical sound.
• It helps us to distinguish between two sounds of same pitch &
loudness.
• Sound of single (same) frequency is called tone while a mixture of
different frequencies is called note. Noise is unpleasant to hear
while music is pleasant to hear and it is of good quality.
(v) Velocity :
The distance travelled by a wave in one second is called velocity of the wave.
Its SI unit is metre per second (ms-1).
Distance travelled
Velocity =
Time taken
λ
V=
T
(λ is the wavelength of the waves travelled in one time timeperiod T)
1 
V = λv  = v
T 
So, Velocity = Wavelength × Frequency
This is the wave equation.
Example. What is the frequency of sound wave whose time period is 0.05
second ?
1
Solution : Frequency, v =
T
Given T = 0.05 s
1 100
=v = = 20 Hz
So, 0.05 5
Hence frequency = 20 Hz.

Compiled by
Animesh
Speed of Sound in Various Mediums
(i) Speed of sound depends on the nature of material through which it
travels. It is slowest in gases, faster in liquids and fastest in solids.
(ii) Speed of sound increases with the rise in temperature.
(iii) Speed of sound increases as humidity of air increases.
(iv) Speed of light is faster than speed of sound.
(v) In air, speed of sound is 344 ms-1 at 22ºC.
Sonic Boom
Some aircrafts, bullets, rockets etc. have ‘supersonic speed’.
• Supersonic refers to the speed of an object which is greater than the
speed of sound and it produces extremely loud sound waves called
‘shock waves’ in air.
• Sonic boom is an explosive noise caused by shock waves.
• It emits tremendous sound energy which can shatter the glass panes of
windows.
Reflection of Sound
Like light, sound also bounce back when it falls on a hard surface. It is called
reflection of sound. The laws of reflection of light are obeyed during reflection
of sound.
(i) The incident sound wave, the reflected sound wave and normal at the
point of incidence lie in the same plane.
(ii) Angle of reflection of sound is always equal to the angle of incidence of
sound.

Reflection of Sound
Echo
The repetition of sound caused by the reflection of sound waves is called an
echo.
 • We can hear echo when there is a time gap of 0.1 second in original
sound and echo (reflected sound).
• Echo is produced when sound reflected from a hard surface (i.e., brick
wall, mountain etc.) as soft surface tends to absorb sound.
v To calculate the minimum distance to hear an echo :
Distance
Speed =
Time
Here Speed of sound in air = 344 ms-1 at 22ºC
Time = 0.1 second
Distance
344 =
So, 0.1 sec
Or Distance = 344 × 0.1 = 34.4 m
34.4
So, distance between reflecting surface and audience = = 17.2 m (at
2
22ºC).
• Rolling of thunder is due to multiple reflection of sound of thunder
from a number of reflecting surfaces such as clouds and the earth.
Reverberation
(i) The persistence of sound in a big hall due to repeated reflection of sound
from the walls, ceiling and floor of the hall is called reverberation.
(ii) If it is too long, sound becomes blurred, distorted and confusing.
Methods to reduce reverberation in big halls or auditoriums
(i) Panels made of felt or compressed fibre board are put on walls and
ceiling to absorb sound.
(ii) Heavy curtains are put on doors and windows.
(iii) Carpets are put on the floor.
(iv) Seats are made of material having sound absorbing properties.
Difference between Echo and Reverberation

Echo Reverberation
1. The repetition of sound caused by 1. The persistence of sound in a big hall
reflection of sound wave is called due to repeated or multiple reflections of
echo. sound from the walls, ceiling and floor
of the hall is called reverberation.
2. Echo is produced in a big empty 2. If reverberation is too long, sound
hall. Here is no multiple reflections becomes blurred, distorted and confusing
of sound. Sound is not persistant. due to overlapping of different sound.

Applications of Reflection of Sound

(i) Megaphone, loudspeakers, bulb horns and trumpets, shehnai etc. are
designed to send sound in a particular direction without spreading
all around. All these instruments have funnel tube which reflects sound
waves repeatedly towards audience. In this amplitude of sound waves
adds up to increase loudness of sound.
(ii) Stethoscope : It is a medical instrument used for listening the sounds
produced in human body mainly in heart and lungs. The sound of the
heartbeats reaches the doctor’s ears by the multiple reflection of the
sound waves in the rubber tube of stethoscope.

(iii) Sound Board : In big halls or auditoriums sound is absorbed by walls,

ceiling, seats etc. So a curved board (sound board) is placed behind the
speakers so that his speech can be heard easily by audiences. The
soundboard works on the multiple reflection of sound.
(iv) The ceiling of concert halls are made curved, so that sound after
reflection from ceiling, reaches all the parts of the hall.
Range of Hearing
(i) Range of hearing in human is 20 Hz to 20000 Hz.
• Children younger than 5 years and dogs can hear upto 25 KHz.
(ii) The sounds of frequencies lower than 20 Hz are known as ‘infrasonic
sounds’.
• A vibrating simple pendulum produces infrasonic sounds.
• Rhinoceroses communicate each other using frequencies as low as
5 Hz.
• Elephants and whales produces infrasonic waves.
• Earthquakes produces infrasonic waves (before shock waves)
which some animals can hear and get disturbed.
(iii) The sounds of frequencies higher than 20 KHz are known as ‘ultrasonic
waves’.
• Dogs, parpoises, dolphins, bats and rats can hear ultrasonic sounds.
• Bats and rats can produce ultrasonic sounds.
Hearing Aid
It is battery operated electronic device used by persons who are hard of hearing.
Microphone convert sound into electrical signals, than those are amplified by
amplifier. Amplified signals are send to the speaker of hearing aid. The speaker
converts the amplified signal to sound and sends to ear for clear hearing.
Applications of Ultrasound
(i) It is used to detect cracks in metal blocks in industries without damaging
them.
(ii) It is used in industries to clean ‘hard to reach’ parts of objects such as
spiral tubes, odd shaped machines etc.
(iii) It is used to investigate the internal organs of human body such as liver,
gall bladder, kidneys, uterus and heart.
(iv) Ecocardiography : These waves are used to reflect the action of heart
and its images are formed. This technique is called echocardiography.
(v) Ultrasonography : The technique of obtaining pictures of internal
organs of the body by using echoes of ultrasound waves is called
ultrasonography.

Compiled by
Animesh
 (vi) Ultrasound is used to split tiny stones in kidneys into fine grains.

SONAR
The word ‘SONAR’ stands for ‘Sound Navigation And Ranging’.
• SONAR is a device which is used to find distance, direction and speed
of underwater objects.
• SONAR consists of a transmitter and a receptor or detector and installed
at the bottom of a ship.
• The transmitter produces and transmits ultrasonic waves.
• These waves travel through water and after striking the objects on the
bottom of sea, are reflected back and received by detector.

SONAR
• These reflected waves are converted into electric signals by detector.
• The sonar device measures the time taken by ultrasound waves to travel
from ship to bottom of sea and back to ship.
Half of this time gives the time taken by the ultrasound waves from ship to
bottom.
Let the time interval between transmission and reception of ultrasound signal
is t. Speed of sound through sea water is v, total distance travelled by waves =
2d. Then, 2d = v × t. This is called echo ranging.
 The sonar is used to find the depth of sea, to locate underwater hills, valleys,
submarines, icebergs and sunken ships etc.
• Bats fly in the dark night by emitting high pitched ultrasound waves
which are reflected from the obstacle or prey and returned to bats ear.
The nature of reflection tells the bat where the obstacle or prey is and
what it is like.

Compiled by
Animesh
 QUESTIONS
VERY SHORT ANSWER TYPE QUESTIONS (1 Mark)
1. Why sound waves are called mechanical waves ?
2. Which characteristic of sound determine : (a) Pitch, (b) Loudness ?
3. Write wave formula for velocity of sound.
4. Write the hearing range of human being.
5. What is sound ?
6. Name the two types of waves which can be generated in a slinky.
7. What is SI unit of frequency ? Write its bigger unit also.
8. How is sound produced ?
9. In which medium sound travels fastest : air, water or steel ?
10. Name two devices which work on the reflection of sound.
SHORT ANSWER TYPE QUESTIONS (2 Marks)
1. State two laws of reflection of sound.
2. Define the term wavelength & frequency.
3. Define the term time period and amplitude.
4. Explain why, the flash of lighning reaches us first and the sound of thunder is
heard a little later ?
5. What is meant by supersonic speed ?
6. Why are the ceiling of concert halls made curved ?
SHORT ANSWER TYPE QUESTIONS (3 Marks)
1. What is reverberation ? How can reverberation in a big hall be reduced ?
2. What is echo ? How is echo formed ? How thunder of clouds is formed ?
3. Write any three applications of ultrasound.
4. Explain how bats use ultrasound to catch the prey.

Compiled by
Animesh
 LONG ANSWER TYPE QUESTIONS (5 Marks)
1. What is SONAR ? Explain its working. Give its uses.
2. A wave is moving in air with a velocity of 340 m/s. Calculate the wavelength
if its frequency is :
(a) 512 vibrations per second (b) 100 Hz.
3. A sonar station picks up a return signal after 3 seconds. How far away is the
object ? [Speed of sound in water = 1440 m/s]
4. A stone is dropped from the top of a tower 500 m high into a pond of water
at the base of tower. When is the splash heard at the top ? Given g = 10 ms-2
and speed of sound = 340 ms-1.

Hints to Long Answer Type Questions

2. (a) 0.66 metre (b) 3.4 m
3. 2160 m
4. 11.47 s
[Hint : Time taken by stone to reach at pond, t = ?, Use s = ut + ½gt2, 500 =
0 + ½ × 10t2; so, t2 = 100 or t = 10 sec.]

Compiled by
Animesh