DBS720, FDS221-R, FDS221-W Cerberus® PRO

Sounder base, Alarm sounders

For the automatic addressable detector bus C-NET

z Sounder base DBS720

– 11 selectable tones, 2 programmable activation levels
– Sound intensity up to 88 dBA, adjustable on 2 levels
– Compatible to the FD720 addressable point detectors
– Connector for 2 external alarm indicators
– Power supply and communication via C-NET
z Alarm sounders FDS221-R, FDS221-W
– 11 selectable tones, 2 programmable activation levels
– Sound intensity up to 99 dBA, adjustable on 3 levels
– Compatible to the addressable detector base FDB221 and FDB222
– Use of base accessories or sealing element possible
– Connector for 2 external alarm indicators
– Power supply and communication via C-NET

Building Technologies
Fire Safety & Security Products
Characteristics

z Environmental
– ecologically processing
– recyclable materials
– electronic und synthetic material simply separable
z Characteristics sounder base DBS720
– sound intensity and sounds adjustable, sounds are synchronized with all alarm de-
vices
– no auxiliary power supply required; power is supplied via C-NET
– very low operating current
– periodic testing of the acoustic part (not audible)
– monitoring of device status
– space for auxiliary terminals
z Characteristics alarm sounders FDS221-R, FDS221-W
– protected electronics, high-quality components
– integrated short-circuit isolator
– sound intensity and sounds adjustable
– addressable base FDB221/222 with screw less connection terminals
– no auxiliary power supply required; power is supplied via C-NET
– very low operating current
– periodic testing of the acoustic part (not audible)
– monitoring of device status

DBS720 Sounder base

Function
– The sounder base serves for acoustic alarming in the addressed FS720 fire detec-
tion system.
– The base sounder can be allocated freely from the fire control panel to activate as
required. It is not dependent upon an alarm signal from its associated detectors.
– compatible with all point detectors of the series Cerberus PRO FD720 (detectors
see product data sheet A6V10202198)

Application
– hotel rooms
– hospital rooms
– nursing homes, living rooms and lounges

Accessories sounder base

Designation plate FDBZ291

– to identify the location address
– application only without detector base seal
RS720

Detector base seal RS720

– for higher protection category

Micro terminal DBZ1190-AA

2
– for conductors of max. 0.5 mm

Connection terminal DBZ1190-AB

2
– for conductors of max. 2.5 mm
– for the connection of extern alarm indicators
(AI) or cable shielding

2
Building Technologies
Fire Safety & Security Products
 Detector locking device LP720
– to protect the detector against theft

Details see detector product data sheet A6V10202198

FDS221-R, FDS221-W Alarm sounder

FDS221-R Function FDS221-R, FDS221-W

– loud alarming in case of fire alarm, clearly recognizable as danger signal
– synchronization of acoustic signals with all other alarm sounder devices FDS229-x
and sounder bases DBS720 in the same detector line (C-NET)

Application
FDS221-W
– along escape routes
– corridors
– staircases

Accessories alarm sounders

FDB221 Addressable base FDB221 and FDB222

– FDB221 base with stand-offs and FDB222 base flat with addressable signal proc-
essing
2
– terminals ‘orange’, wire cross-sectional area from 0.2 to 1.5 mm
– for surface supply wiring, cable diameter up to 6 mm otherwise use base attach-
ment FDB291
FDB222
– FDB222 for recess supply wiring (no stand-offs)

FDB221 base height 22 mm

FDB222 base height 17 mm

Mounting slots min. 46 mm to max. 79 mm

Loop contact
Ø 100 Screw less connecting terminals
Opening for cable entry

Sealing element FDBZ295

– for higher protection category
– Use only with base FDB221 and for recess supply wiring

Height 30 mm
Height with inserted alarm sounder beacon 55 mm

Ø 107

3
Building Technologies
Fire Safety & Security Products
 Base attachment FDB291
– for the supply of surface-mounted lines (break-outs)
– detector base fixed with spring-loaded catch

Base height 25 mm
Height with inserted alarm sounder 57 mm
Opening for cable entry

Mounting slots min. 46 mm to max. 90 mm

Ø 120

Designation plate FDBZ291

– to identify the location address
– compatible for base FDB221/222 and base attachment FDB291

Micro terminal DBZ1190-AA

2
– for conductors of max. 0.5 mm

Connection terminal DBZ1190-AB

2
– for conductors of max. 2.5 mm
– for the connection of alarm indicators or cable screening

Base FDB221/222
Connection terminals DBZ1190-AA

Micro terminals DBZ1190-AB

Detector locking device FDBZ293

– to protect the alarm sounder against theft

Threaded pin M3 x 6

Hexagonal wrench

4
Building Technologies
Fire Safety & Security Products
 Base attachment wet FDB293
– for higher protection category
– for mounting in humid or wet environments
– detector base fixed with spring-loaded catch

Mounting holes 153,5 mm

Base height 49 mm
Height with inserted alarm sounder 84 mm

135

Screwed cable gland M20 x 1.5

– for surface cable entry for base attachment humid FDB293

Detector designation plate DBZ1193A

– compatible with base attachment humid FDB293

Protective cage DBZ1194

– for the protection of the alarm sounder against damage
– can only be used together with the base attachment humid FDB293

Base height with inserted protective

cage 145 mm

Ø 158,5

5
Building Technologies
Fire Safety & Security Products
Installation sounder base DBS720

– The sounder base DBS720 and the detector compose a single unit, which already
has a base and is mounted on ceilings.
– for recess supply wiring
– for surface supply wiring, remove the corresponding breakouts for cable diameter up
to max. Ø8 mm
– for higher protection category use detector base seal RS720

Detector base seal RS720

only use with recess supply wiring

Sounder base DBS720

Smoke detector OP720

or
Multi-sensor smoke detector OH720
or
Heat detectors HI720, HI722

Installation alarm sounder FDS221-R, FDS221-W

– The alarm sounder FDS221-x is inserted directly in the FDB22x base and mounted
on walls or on the ceiling.
– for recess supply wiring
– for surface supply wiring, cable diameter up to 6 mm in diameter with base FDB221,
otherwise use base attachment FDB291 or use base attachment humid FDB293
– for higher protection category use sealing element FDBZ295 and only with recess
supply wiring

FDB221 FDBZ295
Base Sealing element
or
FDB222 FDB221
Base flat Base

FDS221-R FDS221-W FDS221-x

Alarm sounder red Alarm sounder white Alarm sounder red or white

6
Building Technologies
Fire Safety & Security Products
Dimensions

FDS221-R, FDS221-W without base DBS720

Ø 100

43
117
Height with base FDB221 = 52.5 mm
Height with base FDB222 = 47.5 mm
Height with base FDB221 and
sealing element FDBZ295 = 55 mm

29 23

175

Technical data

FDS221-R / FDS221-W DBS720

Operating voltage 12… 33 VDC 12… 33 VDC
Operating current (quiescent) 250 μA 150 μA
– Sound activated 3.5 mA 1.2 mA
Number of sounds 11 11
2 activation levels 2 activation levels
3 sound intensities 2 sound intensities
Sound intensity 80... 99 dBA 80... 88 dBA
Ext. Alarm indicator (AI) 2 2
Operating temperature -25... +70 °C -25... +70 °C
(follow data from detectors)
Storage temperature -30... +75 °C -30... +70 °C
Humidity ≤95 % rel. ≤95 % rel.
Communication protocol C-NET C-NET
Connection terminals according to detector base 0.2... 1.6 mm2
Color red, ~RAL 3000 / white, ~RAL 9010
white, ~RAL 9010
Protection category EN60529 / IEC529 with IP41
– Base FDB221 or FDB222 mounting on the wall with cable feed –
– Base attachment FDB291 from bottom –> IP43, otherwise IP40 –
– Base FDB221 and sealing element FDBZ295 IP44 –
– Base attachment humid FDB293 IP54 –
– Detector base sealing RS720 – IP42
Standards EN54-3, EN54-17 EN54-3
– Approval VdS / LPCB G204073 / request request / request
System compatibility C-NET FC720
QS standards Siemens Standard SN 36350

FDS221-R, FDS221-W DBS720

7
Building Technologies
Fire Safety & Security Products
Details for ordering

Type Part no Designation Weight

Sounder base DBS720 S54319-F5-A1 Sounder base (C-NET) 0.076 kg
LP720 S54319-F9-A1 Detector locking device (2 hexagonal 0.040 kg
key, 100 hexagonal socket pins M3 x 12)
RS720 S54319-F8-A1 Detector base seal (10x) 0.014 kg

Alarm sounders FDS221-R A5Q00004117 Alarm sounder red 0.130 kg

FDS221-W A5Q00006711 Alarm sounder white 0.130 kg
Accessories FDB221 A5Q00001664 Detector base addressable 0.026 kg
FDB222 S54319-F1-A1 Detector base addressable, flat 0.025 kg
FDBZ295 S54319-F10-A1 Sealing element 0.030 kg
FDBZ293 A5Q00005035 Detector locking device (2 hexagonal 0.035 kg
key, 100 hexagonal socket pins M3 x 6)
FDB291 A5Q00001603 Base attachment 0.035 kg
FDBZ291 A5Q00002621 Designation plate (10x) 0.034 kg
FDB293 A5Q00003945 Base attachment wet 0.320 kg
– A5Q00004478 Metal screwed cable gland M20 x 1.5 0.039 kg
DBZ1193A BPZ:4864330001 Designation plate (10x) 0.076 kg
DBZ1194 BPZ:4677110001 Protective cage 0.176 kg
DBZ1190-AA BPZ:4677080001 Micro terminal 0.28... 0.5 mm2 0.001 kg
DBZ1190-AB BPZ:4942340001 Connection terminal 1.0... 2.5 mm2 0.007 kg

Details see equipment overview A6V10225323

Siemens Switzerland Ltd

Industry Sector
Building Technologies Division
International Headquarters © 2009 Copyright by
Fire Safety & Security Products Siemens Switzerland Ltd
Gubelstrasse 22
CH-6301 Zug Data and design subject to change without notice.
Tel. +41 41 724 24 24 Supply subject to availability.
www.siemens.com/buildingtechnologies
Document no. A6V10203095_a_de_-- Manual FD720
Edition 04.2009 Section 6