Vendor: HP

Exam Code: HPE2-T37

Exam Name: Using HPE OneView

Version: DEMO
QUESTION 1
Which statement about M-LAG setup is true?

A. When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE
Synergy Virtual Connect modules.
B. M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem
only single-homed.
C. sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect
modules in the same frame.
D. M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for
HPE Synergy.

Answer: A

QUESTION 2
Refer to the exhibit. Which statement about the logical interconnect shown is true?

A. For FC uplink sets, an additional uplink from second module should be added for redundancy.

Get Latest & Actual HPE2-T37 Exam's Question and Answers from Passleader. 2
https://www.passleader.com
B. The maximum supported number of the internal networks for logical interconnect is configured.
C. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
D. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.

Answer: C

QUESTION 3
Refer to the exhibit. Your customer wants to define a Logical Interconnect Group (UG) and set
the redundancy of the master modules to highly available, but this option is not available. What is
a possible reason?

A. There are not sufficient frames for highly available setup.

B. Some master modules only support a redundant setup.
C. Firmware on the master modules is too low to support highly available setup.
D. A dedicated license must be added to HPE OneView to enable this feature.

Get Latest & Actual HPE2-T37 Exam's Question and Answers from Passleader. 3
https://www.passleader.com
Answer: B

QUESTION 4
Which statement about a Logical Enclosure for HPE BladeSystem is Hue?

A. A logical enclosure can have between 1 to 5 HPE BladeSystem c7000 enclosures.

B. A logical enclosure must be created only for monitored HPE BladeSystem C700O enclosures.
C. A logical enclosure is created automatically, and it is always based on a single enclosure.
D. A logical enclosure can contain a mix of HPE BladeSystem c7000 and C3000 enclosures.

Answer: C

QUESTION 5
You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However,
you can connect to the array using SSMC. What should you verify before adding HPE Primera to
HPE OneView?

A. whether WSAPI service is enabled on HPE Primera array.

B. whether the appropriate license for HPE Primera Is available in HPE OneView.
C. whether array management using HPE OneView is enabled in SSMC.
D. whether there are at least two Fibre Channel networks defined in HPE OneView.

Answer: A

QUESTION 6
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How
should you respond?

A. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is
available in the management network.
B. Remote HPE Synergy Installation can be done only if an additional set of the services was
purchased together with hardware platform.
C. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local
console connection.
D. HPE Synergy can be configured remotely through a secure connection to the FLM if this option
was enabled In the factory.

Answer: A
Explanation:
https://techlibrary.hpe.com/docs/synergy/shared/setup_overview/index.html

QUESTION 7
You ate implementing an HPE Synergy solution with multiple frames in one management ring.
Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the
administrator be used In HPE OneView?

A. to provide static IP addresses to iLOs and interconnect modules if applicable

B. to provide static IP addresses for an operating system running on a Compute Module
C. to provide static IP addresses for Logical Interconnects and Logical Enclosures

Get Latest & Actual HPE2-T37 Exam's Question and Answers from Passleader. 4
https://www.passleader.com
D. to provide static IP addresses for storage systems managed in HPE OneView

Answer: A
Explanation:
Reference:
https://support.hpe.com/hpesc/public/docDisplay?docId=a00026422en_us&docLocale=en_US

QUESTION 8
You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you
complete this task?

A. A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware
repository.
B. A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the
repository.
C. An external repository must be created, because standalone components are supported only In
an external repository.
D. ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware
repository.

Answer: C

QUESTION 9
Your customer plans to use HPE OneView to manage a small environment based on HPE
ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this
customer?

A. HPE Management Agent must he installed for HPE ProLiant Gen 10 servers.
B. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.
C. Not all of the features will be available for HPE ProLiant G7 systems.
D. HPE ProLiant Gen 10 servers do not need an HPE OneView license.

Answer: C
Explanation:
Reference: https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-
a00036908en_us

QUESTION 10
What is the best practice when deploying an HPE OneView appliance?

A. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.

B. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
C. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
D. Deploy two HPE OneView appliances and configure them in HA mode.

Answer: B
Explanation:
Reference: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03943722

Get Latest & Actual HPE2-T37 Exam's Question and Answers from Passleader. 5
https://www.passleader.com
 Thank You for Trying Our Product
Passleader Certification Exam Features:

★ More than 99,900 Satisfied Customers Worldwide.

★ Average 99.9% Success Rate.

★ Free Update to match latest and real exam scenarios.

★ Instant Download Access! No Setup required.

★ Questions & Answers are downloadable in PDF format and

VCE test engine format.

★ Multi-Platform capabilities - Windows, Laptop, Mac, Android, iPhone, iPod, iPad.

★ 100% Guaranteed Success or 100% Money Back Guarantee.

★ Fast, helpful support 24x7.

View list of all certification exams: http://www.passleader.com/all-products.html

10% Discount Coupon Code: ASTR14

Get Latest & Actual HPE2-T37 Exam's Question and Answers from Passleader. 6
https://www.passleader.com