0% found this document useful (0 votes)
31 views1 page

Power Electronics Vize 2021

1) The document is a midterm exam for a power electronics course containing 6 multiple choice and calculation questions. The questions cover topics like semiconductor power devices for different power and frequency levels, calculating resistor values for circuits, plotting waveforms for rectifiers, and calculating inductor currents for a buck converter. 2) Question 1 asks to identify suitable semiconductor power devices for given power and frequency levels. Questions 2 and 3 involve calculating resistor values and output power for circuits including a BJT and diode bridge rectifier. 3) Questions 4 and 5 require plotting voltages, currents and calculating output power for single and three phase controlled rectifiers. Question 6 involves plotting inductor waveforms and calculating ripple current and

Uploaded by

sarisuhamza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
31 views1 page

Power Electronics Vize 2021

1) The document is a midterm exam for a power electronics course containing 6 multiple choice and calculation questions. The questions cover topics like semiconductor power devices for different power and frequency levels, calculating resistor values for circuits, plotting waveforms for rectifiers, and calculating inductor currents for a buck converter. 2) Question 1 asks to identify suitable semiconductor power devices for given power and frequency levels. Questions 2 and 3 involve calculating resistor values and output power for circuits including a BJT and diode bridge rectifier. 3) Questions 4 and 5 require plotting voltages, currents and calculating output power for single and three phase controlled rectifiers. Question 6 involves plotting inductor waveforms and calculating ripple current and

Uploaded by

sarisuhamza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Izmir Kâtip Celebi University Name Surname:

Faculty of Engineering and Architecture Student ID:


Department of Electrical and Electronics Engineering Signature:
EEE318 12.11.2021
Power Electronics Midterm Exam Part-1 11:00-12:30

NOTES
Please number all the answer sheets. Please sign and write your name and surname on all answer sheets.
QUESTIONS
Frequency 1) Which semiconductor power device is
Low Medium High advantageous from IGBT, MOSFET and thyristor to
Power or use at the given power and frequency levels ? Find
Current the corresponding semiconductor power devices
Low Y corresponding to X, Y and Z. (5p)
Medium Z
High X

2) Consider the circuit scheme 3) Consider the single


given in the figure left. Load phase diode bridge
resistance RL is 330 Ω. DC rectifier given left with
current gain of BJT β is 100. Vin= 311sin(wt), Io= 10
BJT is desired to operate at A. Calculate output
saturation. Calculate the max. active power. (15p)
value of the base resistor RB.
Assume that base-emitter
voltage of BJT VBE is 0.6 V.
Assume that saturation
voltage of BJT VCE(SAT) = 0.3
V. (10p)

4) Vin= 5) Consider three


311sin(wt), E=50 phase controlled full
V, R= 10 Ω, wave rectifier left.
trigger angle: 30o VR=311sin(wt), VS:
in the rectifier 311sin(wt-120o),
given left. L is VT=311sin(wt-240o)
large enough so and Io= 10 A. Trigger
that output current angle is 60o. Plot
is constant over output voltage and T2
input voltage current. Calculate
period. Plot output output voltage average
voltage, output value and output
current and active power. (25p)
calculate output
active power.
(25p)

6) Consider a buck converter having input voltage of 100V, output voltage of 20V,output current of 10A and
switching frequency of 50 kHz. The buck conveter inductance is 50 µH. Plot voltage and current waveform
of the inductor. Calculate ripple current, peak current and minimum current value of the inductor. (20p)

You might also like