Robotics 41013: Lab Assignment 1

Weight: 20%.
Demo Due: Week 6 Lab Class – 18:00 Monday, 29 March (Viva booking Zoom meeting)
Report Due: Week 6 – 21:00 Friday 2 April

All demonstrations will be done individually with each student via Zoom. You must have a microphone,
camera and be able to share your screen, so as to show your code / simulation. If you can attend UTS and use
the real robots then you should video the outcomes. There is no need to demonstrate the real robots live, just
play the video. However, it may be impossible for some students to attend UTS to use the labs or equipment.
If you can safely attend UTS within the policy/regulations at the time, it will improve your learning experience.
But if you cannot attend then we will ignore the real robot marks and scale your marks accordingly.

Background:
Your company, SafeCo, assembles small brick walls. SafeCo have recently had a significant increase in orders
that the staff and existing robots simply cannot keep up with.

Fig 1: (a) An example of a Universal Robot mounted on a linear rail; (b) A brick to be layed; (c) Rough sketch
of the layout using 2 UR5s on linear rails; (d) Same sketch different view.

SafeCo already have one UR5 robot which is mounted on a linear rail. This model is given to you (in the
toolbox) and you may use this. SafeCo’s management would like to introduce another robot into their
production workflow to help with menial tasks such as the stacking of the bricks. Due to space limitations, it is
important to management that the factory workspace is not changed significantly or rearranged unnecessarily.
Additionally, SafeCo will still have many people performing various other tasks in the factory. Thus, for safety
and efficiency, SafeCo have decided to buy a UR3 (not a UR3e) OR a Sawyer – you must decide.

Scenario: “SafeCo Assembly Task”

The assembly task consists of picking up the 9 bricks shown in Fig 1, then fitting them together. A sensor is
setup to determine the precise location of each brick (i.e. a 4x4 global homogenous transform of the end-
effector required to grasp it). The bricks need to be stacked end-to-end with 3 bricks in each row, and a total
of 3 rows high.

Task Overview:
Before the robots arrive, management wants some modelling done, and someone to investigate how and
where to mount the robot bases, and a simulated demonstration of the assembly task being performed given
a more open-ended scenario. You, as the person with the most experience working with robots, have been
delegated this task. You have been instructed to use Matlab and to adhere to SafeCo’s coding standards (they
will be provided). You will need to write a professional report describing in detail your findings, and reflections.

Specific Tasks for this Robotics 41013 Assignment

1) Build a D&H model of the UR3s. Build and customise a simulated graphical model of the chosen robot. You
must include some distinctive feature such as your name or student number embossed or drawn
somewhere on your chosen robot model. If you don’t customise it, or you choose to use someone else’s
UR3 model, then please declare this clearly during your viva and you won’t receive marked on that section.
You can add other safety features or models and customise the surrounding environment using Matlab
and the Matlab robotics toolbox. Ensure the mounting location of the robot base can be easily modified.
2) On the submission day you will be given a specific mounting transform for each robot base, and for the
demonstration you will need to be able to rapidly determine and demonstrate to your assessors/peers:
a) the maximum reach of each arm (radius from top and side view);
b) the approximate volume in m3 that the entire arm may exist in (hint: consider the positions of each
joint for a large, representative sample of joint positions) and;
c) the updated location of proposed safety infrastructure given that mounting position.
3) The location of the 9 bricks will on the table, similarly to Fig. 1, but the actual transform of each brick will
be given on the day of submission (for testing purposes you should set the locations to be random within
some bounds). Assume that once the robot end-effector moves to the given brick location it automatically
and successfully grasps anything. You will need to demonstrate the following steps in the assembly:
a) Determine a pose (set of joints) that can pick up each of the bricks;
b) Simulate the robot movement in a smooth joint-position controlled motion between the starting
pickup and drop off locations of the bricks (you decide how and where to build the wall, but it is
suggested that you hardcode the drop-off locations)
c) To receive full marks you must demonstrate the two robot arms moving at the same time. Partial
marks are awarded if you can only move one robot at a time.
d) Simulate the building of the wall by bringing the bricks together, without colliding so as to complete
the assembly;
e) You may use the linear rail on the UR5 since it can make the assembly easier. And you can add a linear
rail for the UR3 as well, but this is not compulsory
4) Complete safety prerequisites before the demo day to unlock real robot use. Show video evidence of
control of one real UR3 robot’s movements through the planned task trajectory via Matlab’s ROS interface.
Perquisites and evidence of real-world use (i.e. videos, early live demos) will still receive partial marks.
5) Submit a zip file of your code to Canvas which will be checked for originality and marked against the given
code standards. A link to the code standard document and logging resource can be found in the Subject
Resources. Note: submitting unnecessary files, such as the whole Robotics Toolbox, will be penalised.
6) Submit a 5-10 page (approx. 2000 words) report to Canvas in which you:
a) Design the workspace (with the aid of figures) so that someone else can install the two robots including
engineering considerations;
b) Include considerations of safety in terms of a basic risk assessment that identifies hazards and their
likelihood of occurrence, and Safe Work Method Statement.
c) Reflect upon why a UR3 OR Sawyer is a good choice, whilst also investigating what sort of limitations
you expect to encounter with the use of this robot;
d) Reflect upon the usage of Matlab and the robotics toolbox
e) Reflect upon the likely precision required, and thoughts about how you would go about controlling the
robot;
f) Reflect upon the likely challenges of sensing and grasping that you have been allowed to assume are
solved problems
g) Reflect upon the safety of the movement of the robots, such as considering if they may collide with
each other or objects in the environment.
h) Include an adequate reference list

Extension Bonus Questions:

You may wish to attempt these bonus questions for additional marks. These questions are challenging, and
support is limited, but they will your demonstration impressive, your debugging easier, and enhance your
understanding. Some questions are marked in the demonstration (D) and others in the report (R).

D1) Investigate Matlab’s “GUIDE “to input a transform for the base of the arms, and the start location of the
bricks and the drop off location.
D2) Given a ROS '.bag' file of a real robot moving, playback the .bag file and demonstrate your simulated robot
movements match the movements from the video of the real robot.
D3) Incorporate a sensor (e.g. camera, e-Stop, limit switch) via ROS that passes data into your Matlab system.
You may like to use your SBC (e.g. Raspberry Pi) or an Arduino.
D4) Use the Virtual reality setup OR the UR simulated robot on either the CloudLab or your local Polyscope VM.

R1) Use Matlab’s “profile” tool to investigate which functions consume most of the time. Reflect briefly (in the
report) on alternative methods to improve computational efficiency.
R2) Given the brick models, select an appropriate gripper1 and discuss with the use of diagrams the ideal way
to grasp the objects.

1
https://www.universal-robots.com/plus/end-effectors/#/01011111111111111111
Marking Scheme:
The assignment is worth 20% of the subject. The assignment will be marked out of 100, attempting the
extension bonus questions is encouraged but not compulsory, and the highest mark that can be received is
still 100 (i.e. 20% for the subject).

General Task Description Mark When?

Given an end effector pose determine a joint state 7
Move robot to required joint states and demonstrate that the joint states satisfy the 7
given pose
If possible - demonstrate a real UR3 robot (in UTS lab). A pass mark is for 1 real UR3 7
robot safely doing the task actions. Higher marks are awarded for more interesting (but
safe) uses of the UR3. If you have a valid reason to not attend UTS (OH&S or
quarantined), then the other marks, without this item (out of 93%), will be scaled to be Demo
out of 100%.
Simulate the environment around the robot 12
Simulated robot model: realistic (7) or simple shape (3) or stick (1) 7
Display and log transforms and status during task completion 5
Calculate and plot workspace radius & volume 5
Incorporate and consider safety in your demonstration 5
Incorporate and consider safety in your design, code and report 5
Code aesthetics: Comments & neatness 5
Code aesthetics: Compliance to code standard provided 5
Code structure: mainly use classes (5) or functions (2) or scripts (0) 5 Report
Report on the design and reflect upon the process 10
Effectively communicate the required task information 10
Marking self and another demo (mark based on distance to mean) 5
Total (55 in Demo & 45 in Report) 100

Demo Bonus (3 marks each): (#1) GUI, (#2) Playback ROS bag, (#3) Incorporate sensor 12
Demo
(#4) Control VR or simulated UR
Report Bonus (3 marks each): (#1) Profile tool analysis, (#2) Gripper 6 Report
Total Bonus (Bonus tasks worth 3 marks each (6 x 3)) 18

Total max marks = min(Total + Bonus,100) max =

100