Scribd
Upload
8K views

SPC Test Paper

The document is a 10 question quiz on statistical process control (SPC) topics for a training at Makino Auto Industries Pvt. Ltd. The questions cover definitions of common SPC terms like Cp, Cpk and CSR; types of graphs used in control charts; implications of points outside control limits; appropriate inspection levels for different Cpk values; appropriate sample sizes; types of variation in a controlled process; and objectives of SPC.

Uploaded by

rav.virendra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8K views

SPC Test Paper

The document is a 10 question quiz on statistical process control (SPC) topics for a training at Makino Auto Industries Pvt. Ltd. The questions cover definitions of common SPC terms like Cp, Cpk and CSR; types of graphs used in control charts; implications of points outside control limits; appropriate inspection levels for different Cpk values; appropriate sample sizes; types of variation in a controlled process; and objectives of SPC.

Uploaded by

rav.virendra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Makino Auto Industries Pvt. Ltd.

Question Paper
Name :- Department :-
Training Topic :- SPC Test Duration :- 10 Minutes Total Marks - 20
Sl.No Question Marks
Q1 SPC Full Form ??
a) Supplier part control c) Special Process Control
Ans:-
b) Stastical Process Control d) Special Part Control
Q2 What is the full form of Cp ???
a) Process Capability c) Center Process
Ans:-
b) Common Process d) Process Control
Q3 What is the full form of Cpk ???
a) Process index c) Process Capability index
Ans:-
b) Process Capability d) Process Control
Q4 What is Makino minimum CSR value of Cpk ??
a) 1.55 c) 1.99
Ans:-
b) 2.22 d) 1.67
Q5 Which Graph is used to express the Control chart ??
a) Zee Graph c) Pareto Graph
Ans:-
b) Line Graph d) Histogram
Q6 If continous 7 values found in one direction in control chart then process ??
a) Process Capable c) Process not Capable
Ans:-
b) Not possible d) Process not centered
Q7 If process capability index [cpk] is less than 1 then ??
a) No inspection required c) 100% inspection required
Ans:-
b) Sampling inspection required d) Only visual inspection required
Q8 Sample size required to conduct SPC study ??
a) 50 Nos c) 100 Nos
Ans:-
b) 25 Nos d) 125 Nos
Q9 When process is under control which type of variation occurs ??
a) Abnormal c) Random
Ans:-
b) Countinous d) Dis Countinous
Q10 What is Objective of SPC ??
a) Quality improvement c) Lower Scrap Cost
Ans:-
b) Customer Satisfaction d) all a,b & C

You might also like