Scribd
Upload
113 views2 pages

Aircol SR 68

Castrol Aircol SR 68 is a synthetic compressor oil designed for use in marine turbochargers and rotary compressors. It provides benefits like extended service intervals, reduced maintenance, and cleaner operation compared to mineral and synthetic oils. Aircol SR 68 is approved for use in ABB turbochargers and is required in some ABB VTR 4 series turbochargers. It is not intended for use in reciprocating air compressors.

Uploaded by

carma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
113 views2 pages

Aircol SR 68

Castrol Aircol SR 68 is a synthetic compressor oil designed for use in marine turbochargers and rotary compressors. It provides benefits like extended service intervals, reduced maintenance, and cleaner operation compared to mineral and synthetic oils. Aircol SR 68 is approved for use in ABB turbochargers and is required in some ABB VTR 4 series turbochargers. It is not intended for use in reciprocating air compressors.

Uploaded by

carma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRODUCT &

TECHNICAL DATA
INDEX NEXT PAGE

CASTROL AIRCOL SR 68
Synthetic turbocharger and rotary compressor oil
DESCRIPTION
Aircol SR 68 is a polyalphaolefin-based synthetic compressor oil, using an advanced additive system to enhance thermal and oxidation
stability and reduce component wear.

APPLICATIONS
Aircol SR 68 is intended for use in Marine turbochargers and rotary Aircol SR 68 is also particularly suitable for use in oil-flooded rotary
compressors, where it will provide significant in-service benefits screw compressors. It has outstanding oxidation stability and anti-
when compared with other mineral and synthetic based lubricants. wear performance. The ester-free formulation eliminates acidic
It is approved as a Special Low Friction Synthetic Oil by ABB Turbo corrosion resulting from hydrolysis.
Systems Ltd and is therefore required in certain ABB VTR 4 series Aircol SR 68 is not suitable for use in Reciprocating Air Compressors,
turbochargers. for which Aircol SN is recommended.

FEATURES/BENEFITS
Aircol SR 68 provides significant benefits when used as a system The performance of Aircol SR 68 compressor oil offers the following
oil in separately lubricated turbochargers, where extended oil specific benefits:
change intervals will be possible. ABB Turbo Systems Ltd have • Extended service intervals.
tested Aircol SR 68 and have approved it as a Special Low Friction
Synthetic Oil (SLFSO). • Reduced maintenance.
• Extended drain periods.
• Cleaner operation.
• Reduced friction.

APPROVALS STATUS
Aircol SR 68 is approved by ABB Turbo Systems Ltd for up to 5000 hours drain intervals and as a low friction lubricant, in their
turbochargers. The use of Aircol SR 68 is mandatory in certain ABB VTR 4 series turbochargers.

CARE AND HANDLING


Avoid prolonged or repeated contact with skin. Wash thoroughly after handling.

PACKAGING AND STORAGE


All packages should be stored under cover. Where outside storage Products should not be stored above 60°C, exposed to hot sun or
is unavoidable drums should be laid horizontally to avoid the freezing conditions.
possible ingress of water and the obliteration of drum markings.

Page 1 of 2
PRODUCT &
TECHNICAL DATA
INDEX PREVIOUS PAGE

TECHNICAL DATA
TYPICAL CHARACTERISTICS UNIT TEST METHOD VALUE
ISO Grade 68
Relative Density @ 15°C g/ml ISO 12185 / ASTM D4052 0.84
Viscosity @ 40°C cSt ISO 3104 / ASTM D445 68
Viscosity @ 100°C cSt ISO 3104 / ASTM D445 10.5
Viscosity Index - ISO 2909 / ASTM 2270 142
Flash Point, PMCC °C ISO 2719 / ASTM D93 >200
Pour Point °C ISO 3016 / ASTM D97 -54
The above figures are typical of those obtained with normal production tolerance and do not constitute a specification.

GENERAL ADVICE
Further information on all Castrol Marine lubricants is available from any Castrol Marine office or from:
Castrol Marine www.castrolmarine.com
Technology Centre
Whitchurch Hill
Pangbourne
Reading RG8 7QR
United Kingdom

This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, is made as to
its accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advised to ensure that they refer to
the latest version of this data sheet.
It is the responsibility of the user to evaluate and use products safely, to assess suitability for the intended application and to comply with all applicable laws and regulations.
Material Safety Data Sheets are available for all our products and should be consulted for appropriate information regarding storage, safe handling, and disposal of the product.
No responsibility is taken by either BP plc or its subsidiaries for any damage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations,
or from hazards inherent in the nature of the material.
All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if you require any further information.
Castrol and the Castrol logo are the trade marks of Castrol Limited, used under licence.
© 2009 BP Marine Limited. All rights reserved.

17th Sept 2009 Produced by BP Marine Limited.


Version 2.0 Registered office: Chertsey Road, Sunbury-on-Thames,
Aircol SR 68 Middlesex. TW16 7BP United Kingdom.
Page 2 of 2 Registered in England & Wales, no 01214291.

You might also like