General Product Catalogue - Antimu
General Product Catalogue - Antimu
Bearing Housings:
To protect the expensive antifriction bearings and to
ensure their trouble-free operation. Wide custom-built
range is available.
MOUNTING TOOLS
Induction Heaters:
To heat & mount bearings, gears,
couplings & other workpieces. It is
equipped with temperature indicator
& audio alarms.
Suretherm Series has touch screen
display, heating graph & 4 Modes of
heating. Custom Built Induction
Heaters are also available.
Hydraulic Pullers:
Self-contained Hydraulic Pullers available in 2/3 Jaw
adjustments. Integrated with safety release valve,
Hydraulic pullers are suitable for dismounting bearings,
gears, couplings & other workpieces.
Hydraulic Pulling set consists of 3 pulling arrangement in
single Kit. Hydraulic Pusher is used for cold mounting of
the workpiece on the shaft.
Mechanical Pullers:
A range of 3 Jaw Mechanical Puller are available for
dismounting small bearings & 2 Jaw Internal/External
Pullers are also available.
Luberight:
This is a computerised lubrication monitoring system for
Manual Lubrication. It helps in maintaining manual lubrication
schedules for 'n' number of lubrication points. Colour coded
chart is generated after each lubrication cycle to show the
amount of actual lubrication performed as against planned
lubrication. Innovative system to eliminate human errors in
manual lubrications.
Lubemon:
This is lubrication monitoring system for centralised
lubrication. Flow meter will be mounted at the end
lubrication point, and it displays real-time lubrication
data on the HMI screen of control unit at a distant
location. System can raise Audio / Visual Alarms in
case of Low lubrication or No Lubrication. Thus the
operator can take preventive actions to avoid failure
due to lack of lubrication.
Wired as well as Wireless version of the systems are
available with us.
OTHER TOOLS
Infrared thermometers:
For Convenient non-contact
temperature measurements of
industrial applications.
Vibration Meters:
Condition Checker: (Model-S909 Z-6) To measure the vibrations of any
Condition Checker determines bearing problems by rotational equipment's. Vibrations can
acceleration envelope method. It checks multi be measured in 3 parameters viz,
parameters like Velocity, Displacement, Acceleration, Velocity, Displacement & Acceleration.
envelope Acceleration & Temperature