Scribd
Upload
119 views2 pages

Ai763 Pp60 Top Clear S4000-Pet30

This document summarizes the specifications of a polypropylene film facestock with a print-receptive topcoat and a general purpose permanent acrylic adhesive bonded to a clear polyester liner. The facestock is 52g/m2 and 58um thick. The adhesive is bonded to a 42g/m2, 30um thick liner. The total laminate thickness is 105um. The adhesive has an initial tack of 8N/25mm and peel adhesion of 6N/25mm. It is suitable for dry and moist non-fatty foods and has a two year shelf life.

Uploaded by

Iván Csörgő
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views2 pages

Ai763 Pp60 Top Clear S4000-Pet30

This document summarizes the specifications of a polypropylene film facestock with a print-receptive topcoat and a general purpose permanent acrylic adhesive bonded to a clear polyester liner. The facestock is 52g/m2 and 58um thick. The adhesive is bonded to a 42g/m2, 30um thick liner. The total laminate thickness is 105um. The adhesive has an initial tack of 8N/25mm and peel adhesion of 6N/25mm. It is suitable for dry and moist non-fatty foods and has a two year shelf life.

Uploaded by

Iván Csörgő
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Facestock

A clear bi-axially oriented, polypropylene film with a print-


AI763
receptive topcoat. Fasson ®
Basis Weight 52 g/m² ISO 536
PP60 TOP CLEAR - S4000-PET30
Caliper 58 µm ISO 534
Adhesive
A general purpose permanent, acrylic based adhesive.
Liner
A clear polyester liner giving optimum smoothness to the
adhesive layer.
This liner is 100% recyclable. Visit our website or send an
email to [email protected] for more
information.
Basis Weight 42 g/m² ISO 536
Caliper 30 µm ISO 534
Laminate
Total Caliper 105 µm±10% ISO 534
Performance data
Initial Tack 8 N/25mm FTM 9 Glass
Peel Adhesion 90° 6 N/25mm FTM 2 St.St. PP60 TOP CLEAR
Min. Application Temp. 10 °C
Service temperature -20°C to 100°C
Adhesive Performance S4000
S4000 is an extra clear, permanent adhesive featuring
excellent UV, water and heat resistance and good tack and
adhesion performance - even on apolar surfaces such as
polyethylene bottles and packaging films. Used in combination
PET30
with filmic liners.
Applications and use
Applications are predominantly in market segments where rigid
containers are used (e.g. Glass, PET). Due to fairly rigid nature
of the film care should be taken with use on non-uniform
surfaces and where a very high level of squeezability is desired
For optimal dispensing a relatively high tension on the backing
paper and a sharp beak are recommended.
This is an automatically generated datasheet. All data to be considered
Conversion & printing as typical values and subject to change without prior notice. Further
testing is always recommended.
The modified acrylic based topcoating can be printed by
If you would like to make a suggestion or comment on this datasheet,
conventional printing techniques including flexo, screen, offset, please send an email to [email protected]
letterpress, silkscreen, gravure, and hot or cold foiling
processes. UV, water-based and solvent-based inks can be
used. The topcoat is designed for optimum ink adhesion. On-
press corona treatment is not advised . The face material is
suitable for Thermal Transfer printing. Exact inks, foils and
ribbons should be specified by your ink/foil/ribbon supplier.
The material has excellent register properties especially when
a high number of different colours are used.
Press stability is good with stable, consistant register during
conversion. Flat bed performance is good while solid and
magnetic rotary dies need additional care. (Die bearers must
be adjusted to the polyester liner).
REACH Compliance
Notification according to Article 33 of the REACH Regulation
(SVHC) This article contains the following substance which is
included on the candidate list, according to article 59 (1,10) of
the REACH registration, in a concentration above 0.1% (w/w):
Nonyl phenol ethoxylate (NPEO) (CAS No.9016-45-9)

Spec Code: AI763 | EAN Code: 8712739343007 Issue date: December-2014


Special Approvals
The adhesive complies with the European food directives and
legislations, FDA 175.105 and the German recommendations
XIV as published by BfR. BfR (Bundesinstitut für
Risikobewertung) is the German Federal Institute for Risk
Assesment. The adhesive can be used in direct contact with
dry and moist, non fatty foodstuffs.
Shelf life
Two years under storage conditions as defined by FINAT (20-
25°C; 40-50%RH)

Avery Dennison Materials Group Europe


Willem Einthovenstraat 11
2342 BH Oegstgeest
The Netherlands
+31 (0)85 000 2000

Warranty
All Avery Dennison statements, technical information and recommendations are based ANY OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED, OR WHETHER OF
on tests believed to be reliable but do not constitute a guarantee or warranty. All Avery MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR OTHERWISE,
Dennison products are sold with the understanding that purchaser has independently SHALL BE EXCLUDED. NO WAIVER, ALTERATION, ADDITION OR MODIFICATION
determined the suitability of such products for its purposes. OF THE FOREGOING CONDITIONS SHALL BE VALID UNLESS MADE IN WRITING
AND SIGNED BY AN EXECUTIVE OFFICER OF AVERY DENNISON.
Avery Dennison products are warranted to be free of defects in material or workmanship
for a period of one year from the date of shipment. Should a defect be communicated to ©2013 Avery Dennison Corporation. All rights reserved. Avery Dennison and all other
Avery Dennison within that time frame, Avery Dennison will evaluate and determine the Avery Dennison brands, this publication, its content, product names and codes are
existence of the defect and further decide, at its sole discretion, to either replace the owned by Avery Dennison Corporation. All other brands and product names are
defective product without charge or compensate it with a credit note in such amount as trademarks of their respective owners. This publication must not be used, copied or
Avery Dennison deems reasonable. Avery Dennison shall have no responsibility beyond reproduced in whole or in part for any purposes other than marketing by Avery
the replacement value of the defective product nor shall in any way be liable or Dennison.
responsible for consequential or incidental damages.

Spec Code: AI763 | EAN Code: 8712739343007 Issue date: December-2014

You might also like