SERVICE PARTS GUIDE

672G/GP GRADER

IN-LINE FUEL STRAINER PRIMARY AIR FILTER ELEMENT

AT175223
AT223493
Interval (hrs) - Every year or as required
Interval (hrs) - As Required. depending on conditions
SUCTION HOSE
T229810
REAR AXLE BREATHER
Interval - Recommended every 4000 hours or
AT101565 after air filter plugged has occurred - Also Req.
Interval (hrs) - 2000. Clamps RE19429 & AT53439

SECONDARY AIR FILTER ELEMENT

HYDRAULIC TANK BREATHER AT175224
AT101565 Interval (hrs) - Every year or as required
Interval (hrs) - 2000. depending on conditions

ENGINE OIL FILTER

FUEL TANK BREATHER
DZ118283
H216169 Interval (hrs) - 500 when used with John Deere
Interval (hrs) - 1000. Plus 50II engine oil. All other conditions 250
Hours

HYDRAULIC OIL FILTER PRIMARY AND FINAL FUEL FILTER

ELEMENTS KIT
AT367840 RE525523
Interval (hrs) - 2000. Interval (hrs) - 500.

TRANSMISSION OIL FILTER............AT335492 CAB FRESH AIR FILTER

SUCTION SCREEN................................YZ104125 AT191102
Also Req. P50631 O Ring Interval (hrs) - 2000 Hours or Yearly whichever
Interval (hrs) - 2000. occurs first
CAB RECIRCULATION AIR FILTER
AXLE HOUSING OIL FILTER AT307501
AT335492 Interval (hrs) - 2000 Hours or Yearly whichever
Interval (hrs) - 2000. occurs first

AUXILIARY FUEL FILTER ELEMENT (IF FAST FILL FUEL BREATHER FILTER (IF
EQUIPPED) EQUIPPED)
AT365869 T225008
Interval (hrs) - 500. Interval (hrs) - 1000.

ENGINE ROCKER ARM COVER

GASKET R527884
Set valve clearances Interval (hrs) - 2000.

Apr.2023. Release Date. *See operator’s manual for addional details.

 SERVICE PARTS GUIDE
672G/GP GRADER

CAPACITIES (Approximate): Transmission

Hy Gard Premium Transmission & Hydraulic Oil
Fuel Tank: 5L.........................................................................CP1565
672G/GP...............................................................416 L 20L.......................................................................CP1566
205L.....................................................................CP1567
1000L...................................................................CP2103
Cooling System:
672G/GP Transmission......................................28.4 L (2000 Hour Service)
Cool-Gard - 6000 Hour Service Interval 672G/GP Tandem Housings (Each)..................74 L (4000 Hour Service)
5L.......................................................................CP8275 672G/GP Axle Housing......................................38 L (2000 Hour Service)
10L.....................................................................CP8276 672G/GP Circle Gear Case.................................5.7 L (2000 Hour Service)
20L.....................................................................CP8277 672G/GP Front Hub Oil (Each)...........................7.2 L (1000 Hour Service)
672G/GP................................................................49 L
Hydraulics
Hydrau Premium Hydraulic Oil - 4000 Hour Service Interval
Crankcase with Filter:
20L........................................................................CP8239
Premium
205L......................................................................CP8240
Plus 50 II - 500 Hour Service interval
5L.......................................................................CP6657 1000L....................................................................CP8261
20L.....................................................................CP6658 672G/GP Hydraulic Reservoir.............................53 L
205L...................................................................CP6659
1000L.................................................................CP6660
Economy
Torq Gard - 250 Hour Service Interval
5L.......................................................................CP8205
20L.....................................................................CP8206
205L...................................................................CP8207
1000L.................................................................CP8208
672G/GP................................................................27 L

Apr 2023. Release Date. *See operator’s manual for addional details.
 WEAR PARTS GUIDE
672G/GP GRADER

MOLDBOARD EDGES
12 FEET MOLDBOARD WITH 5/8 BOLTS
6" EDGE x2..............................................Premium T66702
Economy GB6658HT
8" EDGE x2..............................................Premium T66703 R/H 24" MOLDBOARD EXTENSION
Economy GB6858HT Must be fitted with 14' Moldboard. Only one extension
Also Req...............................28x 09H1759 & 28x 14H1095 permitted per machine.
REINFORCEMENT................................................AT341206
13 FEET MOLDBOARD WITH 5/8 BOLTS
SUPPORT..............................................................AT395036
8" EDGE x1..............................................Premium T66703
EXTENSION.............................................................T202935
Premium T66704
Economy GB6858HT Also Req. 4x 10H1043, 3x T216610, 7x 09H1759,
Economy GB7858HT 19M8035, 24M7529, 14x 14H1095 & 7x 10H1759
Also Req...............................30x 09H1759 & 30x 14H1095 Must be fitted with 2x T66706 8"x 8' edge with this extension
14 FEET MOLDBAORD WITH 5/8 BOLTS
6" EDGE x2..............................................Premium T66707 L/H 24" MOLDBOARD EXTENSION
Economy GB7658HT Must be fitted with 14' Moldboard. Only one extension
8" EDGE x2..............................................Premium T66704 permitted per machine.
Economy GB7858HT REINFORCEMENT...............................................AT341206
Also Req.............................. 32x 09H1759 & 32x 14H1095 SUPPORT.............................................................AT395037
16 FEET MOLDBAORD WITH 5/8 BOLTS EXTENSION............................................................T202934
8" EDGE x2.............................................Premium T66706 Also Req. 4x 10H1043, 3x T216610, 7x 09H1759,
Also Req...............................34x 09H1759 & 34x 14H1095 19M8035, 24M7529, 14x 14H1095 & 7x 10H1759
14 FEET MOLDBOARD WITH 3/4 BOLTS Must be fitted with 2x T66706 8"x 8' edge with this extension
8" EDGE x2..............................................Premium T74772
Economy GB7834HT
RIPPER SHANKS & TEETH
Also Req.................................32x T70286 & 32X 14H1092
SHANK x3................................................................T9J6586
16 FEET MOLDBOARD WITH 3/4 BOLTS
TOOTH x3................................................................T6Y0309
8" EDGE x2..............................................Premium T74773
Also Req. 3x T9W2668 & 3x T8E6359
Economy GB8834HT
Also Req..................................34x T70286 & 34x 14H1092
SCARIFIER SHANKS & TEETH
SHANK x9...............................................Premium T9F5124
OVERLAY END BITS
Economy 9F5124-101
6" EDGE WITH 5/8 BOLTS x2................Premium T202876
TOOTH x9...............................................Premium T6Y5230
Economy T202876N
Economy 6Y5230L
Also Req.................................10x 09H1759 & 10x 14H1095
8" EDGE WITH 5/8 BOLTS x2................Premium T202940
Economy T202940N
Also Req.................................10x 09H1759 & 10x 14H1095
8" EDGE WITH 3/4 BOLTS x2................Premuim T218923
Also Req...................................10x T70286 & 10x 14H1092

Apr. 2022. Release Date. *See operator’s manual for additional details.
 MIDLIFE PARTS GUIDE
672G/GP GRADER

STARTER MOTOR FUEL INJECTOR Premium DZ100223

Premium RE549230 Premium Economy SE501948
Premium Economy SE502823 INJECTOR LINES...............No. 1 - RE525513
No. 2 - RE525514
Also req. R53108 gasket No. 3 - RE525515
No. 4 - RE525516
No. 5 - RE525517
AUXILLERY BELT T428699 No. 6 - RE525518
Also req. R527884 & 6x RE528096

BELT TENSIONER Premium RE554300 CYLINDER HEAD GASKET SET

Economy A-RE68715 Premium RE528402
Economy A-RE528402
All gaskets and seals required to remove
TORSIONAL DAMPER
Inner...............................................RE522932 and refit the cylinder head
Outer................................................RE57604
Also req. 6x 19M7402, 19M8889 & R523306 THERMOSTATS
REAR COUPLING........................AT505164 Premium DZ100553
Also req. 12x 19H3219 Economy A-AR48675

ENGINE OIL COOLER Premium - AR55394 EGR COOLER.................................DZ101011

Economy - A-AR55394 EGR VALVE.......................................D123152
Also Req. 3x R504810, 3x R518619 & DZ122256
Also Req. R520645, DZ114591 & 4x R216725
RADIATOR......................................AT440411
HYDRAULIC OIL COOLER..............AT456408
LOW PRESSURE FUEL PUMP
TRANSMISSION OIL COOLER........AT456407
Premium RE539764
CHARGE AIR COOLER...................AT365067
Comes with seal kit RE523784

CHARGE AIR COOLER HOSES

A/C COMPRESSOR
Turbo to CAC............................2x R500494
Premium AT367640
CAC to Intake Manifold................AT335686
Also req. AT162848, R183409 x2, 51M7090 & 51M7089 T210630
Also req. 4x AT359297 & 4x AT301456
WATER PUMP Premium RE530194
Premium Economy SE501228 BOTTOM RADIATOR HOSE...........T261292
Economy A-RE530194 TOP RADIATOR HOSE....................T160183.
Also Req. R119383 Gasket
Also Req. 4x AH170895
TURBOCHARGER
EXHAUST MANIFOLD GASKETS
Premium DZ108134
Premium Economy SE502429 GASKETS x6....................................R534605
Also req. R535094, R521158, 2x 19M8063, SLEEVE x6.......................................R522574
4x R520121, 3x T77613, 2x 51M7040 RING x2............................................R135482
STUDS x11.......................................R521323
ALTERNATOR 130A........Premium RE558679 STUD x1...........................................R520410
Premium Economy SE502564
Economy A-RE558679 FRONT CRANKSHAFT SEAL
ALTERNATOR 100A........Premium RE558676 RE543639
Premium Economy SE502563
Economy A-RE558676

Apr. 2023. Release Date. *See operator’s manual for additional details.
 ENGINE RE-LIFE PARTS GUIDE
672G/GP GRADER

ENGINE RE-LIFE
ENGINE OVERHAUL KIT.....................Premium DZ10599
Economy A-DZ10599 SENSORS AND VALVES
CRANKSHAFT................................................... DZ105801 FUEL RAIL RELIEF VALVE..................................RE524529
CONROD............................................Premium DZ122131 FUEL RAIL PRESSURE SENSOR........................RE523811
Premium Economy SE501759 CAMSHAFT POSITION SENSOR.........................RE519144
FLYWHEEL........................................................RE505428
OIL PRESSURE SENSOR.....................................RE167207
Also req. Flywheel Bolts x6 R521465
CRANK SPEED SENSOR.....................................RE519144
ENGINE OIL PUMP...........................Premium RE543187
Economy A-RE543187
Also req........................................... Oil Jets x6 RE522991 CORE PLUGS
FUEL PUMP (HPCR)..........................Premium RE571640 TIMING COVER.........................................................R98527
Premium Economy SE501922 TIMING COVER.........................................................15H666
Also Req.............................................Fuel Rail RE521599 EGR PORT.................................................................R43409
Injector Wiring Harness RE558114 MANUAL TURNOVER PORT..................................R121929
INTAKE MANIFOLD..................................................15H685
VALVE ACTUATING INTAKE MANIFOLD x2.............................................15H562
CYLINDER BLOCK X2.............................................15H690
CAMSHAFT...........................................Premium R522884
Premium Economy SE501775
CAMSHAFT BUSHES x6......................................R527877 O RINGS
PUSH RODS x12...................................................R536992 FUEL LINES x7.........................................................R63548
ROCKER ARMS.................................Intake x6 RE552371 FUEL LINES x3.........................................................T77613
Exhaust x6 RE552370 FUEL LINE..............................................................51M7041
CAM FOLLOWERS x12......................................DZ116648 FUEL LINES x5......................................................51M7095
PUSH ROD GUIDE x12.........................................R526781 TIMING COVER.....................................................51M7044
Also Req.............................................. Spring x5 R517522 VALVE COVER.......................................................T122075
Clamp Down Bolts x6 R521261 FUEL LINE.............................................................51M7039
Snap Ring x2 40M7259 FUEL LINE...............................................................R51936
Washer x4 R521316 INTAKE MANIFOLD x7..........................................R548750
Washer x2 R35022 DIPSTICK...............................................................51M7042
Washer x1 R522884
Core Plugs x1 R82007
ALSO REQUIRED
Camshaft Key x1 26H91
FAN DRIVE IDLERS x2........................................RE505265
CYLINDER HEAD Also req. Stepped Bolts x2 R128893
Dust Covers x2 R99590
VALVES................................................Intake x12 R520223
Exhaust x12 R520224 COOLANT DRAIN VALVE.....................................AT13740
VALVE GUIDES x24.............................................DZ111535
VALVE INSERTS x24.............................................R522049 ENGINE MOUNTS
INJECTOR SLEEVES x6.....................................RE543935 ISOLATORS.....................................................2x AT434974
HEAD BOLTS x26................................................DZ110495 4x AT223527
Also Req..........................................Core Plug x3 30M7029 CAP SCREWS...................................................2x 19M8020
Core Plug x1 T13519 6x 19M7719
Core Plug x23 30M7031 2x 19M8632
Valve Springs x24 R504235 4x 19M7969
Valve Retainer x24 R518233 8x 19M9149
Valve Lock x48 R520798

Apr. 2023. Release Date. *See operator’s manual for additional details.
 TRANSMISSION RE- LIFE PARTS GUIDE
672G/GP GRADER

TRANSMISSION OIL PUMP.................YZ107460 2nd STAGE SHAFT .........................Bearings 2x YZ106184

2x YZ106078
Also Req. 2x F37030250 & A4540R
2x YZ105415
Clutch Plate x18 YZ105493
INPUT HUB.............................................YZ104151 Separator Plate x20 YZ106211
Snap Ring R26264 Piston x2 YZ107464
O-Ring R122886 Disk Spring x12 4003725
OUTPUT.............................Output Yoke DZ115837 Also Req. 2x YZ105485, 2x YZ105454, 2x F37030244G,
Bearing Cone x2 YZ103188 2x YZ105465, 2x YZ150119, 2x F81743, 2x YZ107137,
Bearing Cup x2 YZ103146 2x 4008521, 2x F37020144, 3x YZ250161, 2x F7400012D
Also Req.
& YZ101353
YZ107387, YZ106948, YZ101905 & YZ101643
3rd STAGE SHAFT ..........................Bearings 2x YZ106184
CONTROL VALVE......Solenoid Valve x8 YZ107347 2x YZ106078
Relief Valve YZ106316 2x YZ105415
Temp Sensor RE48419 Clutch Plate x18 YZ105493
Gasket YZ104180 Separator Plate x20 YZ106211
Gasket YZ104179 Piston x2 YZ107464
Plate YZ104959 Disk Spring x12 4003725
Also Req. YZ501659, 3x R29936, F37020126, Also Req. 2x YZ105485, 2x YZ105454, 2x F37030244G,
F37020122, R136101, 2x YZ501785, 3x YZ501813, 2x YZ105465, 2x YZ150119, 2x F81743, 2x YZ107137,
11x 51M7040, 3x 51M7048, 51M7041, 10x T77814, 2x 4008521, 2x F37020144, 3x YZ250161, 2x F7400012D
4x 51M7042, 4x T77613, T76938, 9x T77858, 6x & YZ101353
51M7047 & U12547 4th STAGE SHAFT..........................Bearings 2x YZ106492
2x YZ103875
TRANSMISSION CASE RE-LIFE 2x YZ103144
BEARINGS......................................................F40111 Clutch Plate x20 YZ105494
2x YZ105122 Separator Plates x20 YZ106212
YZ103455 Piston x2 YZ107462
F40211R Disk Spring x12 4003725
YZ100100 Also Req. 2x YZ105485, YZ105430, 2x F711878HWK,
SENSORS...........................Wheel Speed RE330848 2x YZ150217, 2x YZ105982, 2x F81743, 2x YZ107137,
Speed Sensor 2x RE519144 2x 400521, 2x YZ105119, 2x F37020144 & 3x YZ250161
Also Req.
N131806, HXE21461, 51M7045, 2x F37030219, 5th STAGE SHAFT.........................Bearings 2x YZ106185
4x P50631, YZ105320, 51M7047, F37030250, 2x YZ106078
YZ104125, R37010042, 51M7039, AXE15751 & 2x YZ105415
51M7041 Clutch Plate x20 YZ105494
Separator Plates x20 YZ106212
PARK BRAKE........................................Solenoid YZ107201 Piston x2 YZ107462
Pressure Sensor AT223537 Disk Spring x12 4003725
Clutch Plate x8 YZ100952 Also Req. 2x YZ105485, 2x YZ150217, 2x YZ105982,
Brake Disk x7 YZ502512 2x YZ107137, 2x F81743, 2x 4008521, 2x YZ150119,
Piston YZ501843 2x F37020144, YZ101353, 2x F400012D, 3x YZ250161
Disk Spring x2 YZ501829
Also Req. 6th STAGE SHAFT......................Bearing Cone YZ104281
YZ501881, YZ501846, YZ501845, YZ501847, F37030273, Bearing Cup YZ104280
YZ501855, T77613 & 51M7041 Bearing Cone YZ104088
Bearing Cup YZ104087
1st STAGE SHAFT........................Bearing Cone YZ103188 Shim Kit YZ104170
Bearing Cup YZ103146 Also Req. F37030239 & 51M7039
Bearing Cone YZ104281
Bearing Cup YZ104280
Also Req. YZ250161

Apr. 2023. Release Date. *See operator’s manual for additional details.
 AXLE & TANDOMS RE-LIFE PARTS GUIDE
672G/GP GRADER

TANDOM AXLE RELIFE (ONE SIDE ONLY) DIFFERENTIAL

DRIVE SPROCKET................................................CE33305 BEARINGS......................................Bearing Cone YZ122227
CHAIN SPROCKET x2...........................................CE33541 Bearing Cup YZ122231
ROLLER CHAIN x2..............................................AT408162 Bearing Cone YZ122371
BEARINGS..................................Bearing Cone x2 JD9080 Bearing Cup YZ122370
Bearing Cup x2 JD9138 CLUTCH PLATE x5.....................................................R34858
Bearing Cone x2 JD8962 CLUTCH DISK x5....................................................YZ121809
Bearing Cup x2 JD9120 CLUTCH PLATE..........................................................R34857
Also Req. 2x AT408161, 2x 11M7021, 2x T158339, 2x NEEDLE ROLLERS x104............................................R70115
AT363653, 2x 11M7085, 2x R48437, 2x CE19711 2x PISTON........................................................................R95116
T157952, 2x U17409, U14273, 2x T233898, Also Req. 3x 38H328, 3x YZ120398, 2x R60038, 34M7224,
4x T158511, T158340, T41677, 32x TM13505 34H348, 2x R93623, 4x YZ120471, 4x R70113, 4x R70112,
4x R59460, 2x R34513, 2x R46323, 4x R46324, 4x R46325
TANDEM PIVOT (ONE SIDE ONLY)
BEARING CONE x2..................................................JD8989 HYDRAULIC FRONT WHEEL DRIVE HUB (ONE SIDE)
BEARING CUP x2....................................................JD8272
BUSHES x2.............................................................T158332 BEARINGS...............................Bearing Cone x2 AT187114
THRUST WASHER x6............................................T158492 Bearing Cup x2 JD10423
Also Req. 2x T157952, T158334, T158335, T157944, Bearing Race x2 T166934
AR75527, 2x CE32526 & 44x TM13506, Roller Bearing x3 AT187117
16x 19M7417 Roller Bearing x3 DE18970
Needle Bearing AT187119
TANDEM PLANETARY (ONE SIDE ONLY) BRAKE DISK x3....................................................AT187115
PISTON.....................................................................T186988
BRAKE DISK x6.....................................................YZ123494
SEAL........................................................................DE31411
BRAKE DISK x5.......................................................RE65008
SPRING x12..............................................................T166917
NEEDLE ROLLER x144.............................................R63575
HARDWARE.......................................M10x60 x30 19M7807
THRUST WASHER x6..............................................R112079
M16x45 x12 19M7844
M16x180 CAP SCREW x12.....................................19M8190
M10x14 x3 19M8451
ROD x4......................................................................T387903
M10x30 x24 T188745
Also Req. R52389, R72430, 3x R71929, R81162, M8x65 x3 19M8554
R94545, 2x R129628, 2x 40M7042 & 4x 14M7398, M8x55 x3 19M8335
R131477, R171478, 2x T77613, 2x 51M7041 M12x40 x12 19M7791
Also Req. CE31696, 2x T186659, 2x T186658, 34M5564,
AXLE HARDWARE 2x U17409, T183810, T183811, T183812, 40M1837,
M20x80 CAP SCREW x6..........................................19M9134 2x T166928, 3x T166925, 2x T186655, T186989, T166921,
M24x100 CAP SCREW x8......................................19M10438 40M7187, 3x T166931, T188352, T188351, T166933,
RUBBER PLATFORM MATS x4...............................T351262 T372180
M8x20 SCREW x16..................................................19M9836
AXLE INPUT
DIFFERENTIAL LOCK DRIVESHAFT UNIVERSAL x2...............................AT199084
DIFFERENTIAL LOCK OIL PUMP........................AT482981 DRIVESHAT CAP SCREWS x8.............................19M11150
SOLENOID VALVE................................................AT303799 INPUT YOKE..........................................................DZ104276
PRESSURE RELIEF VALVE.................................YZ250263 BEARINGS.....................................Bearing Cone YZ121167
BREATHER............................................................DZ100302 Bearing Cup YZ121166
Bearing Cone YZ122252
Also Req. 2x R375R, 51M7041, 51M7051, R26287, Bearing Cup YZ122372
R47154, 51M7047, 51M7043, 51M7048, P42061, R151088,
T160541 Also Req. R100500, A4540R, 19M8485, R35365, RE33887,
2x R35366, 2x R35367, R51196, R51197, R51198, R51199,
R56308, 51M7051, 51M7041

Apr. 2022. Release Date. *See operator’s manual for additional details.
 MACHINE RE-LIFE PARTS
672G/GP GRADER

BATTERIES x2 DRAFT FRAME RE-LIFE

Premium TY23020BAU BALL x3............................................T290403
Economy BALL CAP x3....................................H232376
Also Req. 12x 147623, 8x T42243, T213579, 6x
AIR CONDITIONING 19M8639, 19x T148164, 4x 19H2728, 10x 19H2641
EVAPORATOR..................................AT452016
STEERING TIE RODS
BLOWER FAN...................................AT365431
THEROSTAT.....................................AT498275 STEERING TIE RODS x2..................AT444982
TX VALVE.........................................AT447096 L/H TIE ROD END.............................AT444131
Also Req. T356706, T356708, R183509, R/H TIE ROD END............................AT444132
R183412
FRONT AXLE ATTACHMENT
SADDLE FRAME RE-LIFE BEARING..................................................2x AT471791
BUSHINGS..........................................................2x T231335 BUSHINGS..................................................2x T237676
2x T237990 ` 2x T285772
4x T234970 2x T205219
2x T231327 4x T361959
BEARING CAP x4..................................................AT350329 T232406
BALL.........................................................................T231328 Also Req. 2x T225566, 4x 40M7395, AT455646, 3x
Also Req. 2x T60260, 2x T231331, 2x T238574, T253342, 4x T253341
2x T237521, 2x T237520, 4x T46639, 8x T102138
LEAN BAR
CIRCLE FRAME RE-LIFE BUSHING.....................................................2x T366381
BUSHING.............................................2x T143929 PIN...............................................................2x T352285
2x T230381 Also Req. 2x 19M8183, 2x 14M7517
4x T203388 CIRCLE INSERTS
SUPPORT............................................6x T150614
SUPPORT CAP SCREWS.................18x 19H2329 STANDARD.................................6x T453854
15x T453855
Also Req. 12x T129982, 24x T1299891, 14x EXTENDED LIFE.........................6x T163748
24H1671, 4x T208792, 2x 08H4845, 12x T297340 15x T184082
PREMIUM CIRCLE FRAME RE-LIFE R/H KINGPIN RE-LIFE
SEALS................................Upper Circle T324379 KINGPIN...............................................Upper T353149
Lower Circle T324380 Lower T183817
Main Bearing T436862 BEARING x2.................................................AT188662
BUSHING..............................................2x T143929 SENSOR.......................................................AT333680
2x T230381 BUSHING x2.....................................................T41953
4x T203388 SEAL..............................................................CE19663
Also Req. 48x T416589, 8x T208792, 2x
Also Req. T183818, T183819, T183820, T361910,
08H4845, 14x 24H1671
CE19646, T361907, T224471, 2x 19M7775, T183822,
CE17368, AT469074, 3x T378717
BLADE TILT FRAME RE-LIFE
BUSHING............................................................4x T143429 L/H KINGPIN RE-LIFE
WEAR INSERTS.................................................4x T239757 KINGPIN...............................................Upper T183816
2x T299164 Lower T183817
HARDWARE........................................M24x80 x4 19M10207 BEARING x2.................................................AT188662
M24x120 x6 19M9145 BUSHING x2.....................................................T41953
M10x45 x12 19M7572
Also Req. T183818, T183819, T183820, T183822,
Also Req. 12x T240965, 13x T240964, 2x T299148, 4x
CE17368, AT469074, 3x T378717
T221053,

Apr. 2023. Release Date. *See operator’s manual for additional details.
 MACHINE RE-LIFE PARTS
672G/GP GRADER

CIRCLE DRIVE RE-LIFE SINGLE INPUT WITH CLUTCH

BEARINGS...................................Bearing Cone AT169451
Bearing Cup JD9134
Bearing Cone JD9082
Bearing Cup JD9141 PREMIUM CIRCLE DRIVE RE-LIFE
Bearing Cone JD10144
BEARINGS...................................Bearing Cone AT169451
Bearing Cup JD8240
Bearing Cup JD9134
WORM GEAR..................................................Hub T165064 Bearing Cone JD9082
Gear T184228 Bearing Cup JD9141
Shaft T167010 Bearing Cone JD10144
Pinion Shaft T165061 Bearing Cup JD8240
CLUTCH..............................................Disks x14 AT184409 WORM GEAR..................................................Hub T165064
` Spring T165791 Gear T184228
SHIMS......................................................................T165068 Shaft T167010
T165069 Pinion Shaft T451171
T165070 CLUTCH..............................................Disks x14 AT184409
T165072 ` Spring CE35222
T165073
SHIMS......................................................................T165068
T165074
T165069
T152881
T165070
T152882
T165072
T152883
T165073
Also Req. 2x T165063, AT169452, R37287, 3x T165071, T165074
3x T165075, T80123, DE31197, T43202, T152993 T152881
T152882
ENGINE FRAME ARTICULATION RE-LIFE T152883
BEARING............................................................AT202609 Also Req. 2x T165063, AT169452, R37287, 3x T165071,
BUSHING..............................................................T232536 3x T165075, T80123, DE31197, T43202, R26375,
SEAL................................................................2x T156711 51M7040, H232371, F37030265
2x T102207
LOCKING COLLAR..............................................T156174
PIN.........................................................................T232420 MAIN FRAME ARTICULATION RE-LIFE

Also Req. T354262, 2x T156711, T156710, T156709, BUSHING...........................................................2x T237676

10x 19M10445 2x T285772
T232406
PIN.........................................................................AT343696
CAB MOUNTS SEAL...................................................................4x T225566
ISOLATOR.......................................................4x AT170005 Also Req. 4x 19M10276, 6x 19M9985
FRONT BOLT....................................................2x 19M7968
REAR BOLT......................................................2x 19M7781

Apr. 2023. Release Date. *See operator’s manual for additional details.
 MACHINE END LIFE PARTS
672G/GP GRADER

REPLACMENT ENGINE
COMPLETE ENGINE.............................RG37929
LONG BLOCK......................................RM100312
SHORT BLOCK....................................DZ113609

REPLACEMENT TRANSMISSION
COMPLETE TRANSMISSION..............AT506966

1400 SERIES TEAMMATE II AXLE

DIFFERNETIAL........................................YZ19971
HALF AXLE..............................................DE31640 FRONT AXLE PLANETERY ASSEMBLY
TANDEM AXLE..............................Front DE31642
L/H PLANETARY......................................AT445703
Rear DE31641
R/H PLANETARY.....................................AT445698
DIFF LOCK PUMP.................................AT482981

HYDRAULIC FRONT WHEEL DRIVE MOTORS

FAN DRIVE L/H MOTOR...............................................AT465606
FAN DRIVE PUMP..................................AT455721 R/H MOTOR...............................................AT471822
Seal Kit AT317721
FAN MOTOR...........................................AT455730

MAIN HYDRAULIC PUMP

PUMP WITH SOFT START....................AT522445
PUMP WITHOUT SOFT START.............AT522444
Also Req. F37030250, F39000106, 4001456

Apr. 2023. Release Date. *See operator’s manual for additional details.
 HYDRAULIC CYLINDERS RE-LIFE & END LIFE PARTS
672G/GP GRADER

FRONT STEERING CYLINDERS

CYLINDERS.................................................R/H AHC16684
L/H AHC16684 G BLADE TILT CYLINDER (- 693168)
BORE SEAL KIT..................................Premium AH164325 CYLINDER...........................................................AHC16768
Economy A-AH164325 BORE SEAL KIT..................................................AHC19978
ROD SEAL KIT....................................Premium AH161589 ROD SEAL KIT....................................................AHC16954
Economy A-AH161589 G BLADE TILT CYLINDER (693169-)
CYLINDER...........................................................AHC19924
ARTICULATION CYLINDERS
BORE SEAL KIT.................................................AHC19978
CYLINDERS.................................................R/H AHC19511
L/H AHC19511 ROD SEAL KIT....................................................AHC16954
BORE SEAL KIT.................................................AHC19978
GP BLADE TILT CYLINDER (- 713501)
ROD SEAL KIT...................................................AHC16954
CYLINDER...........................................................AHC20236

WHEEL LEAN CYLINDER BORE SEAL KIT..................................................AHC19978

CYLINDER...........................................................AHC16800 ROD SEAL KIT....................................................AHC16954

BORE SEAL KIT.................................................AHC19978 G BLADE TILT CYLINDER (713502-)

ROD SEAL KIT....................................................AHC16954 CYLINDER...........................................................AHC22950

BORE SEAL KIT.................................................AHC19978
G BLADE LIFT CYLINDERS ROD SEAL KIT....................................................AHC16954
CYLINDER x2.....................................................AHC16797
G CIRCLE SIDE SHIFT CYLINDER
BORE SEAL KIT................................................AHC22108
CYLINDER.................................................,.......AHC16793
ROD SEAL KIT...................................................AHC16954
BORE SEAL KIT................................................AHC22108
ROD SEAL KIT..................................................AHC16954
GP BLADE LIFT CYLINDERS
CYLINDER x2.....................................................AHC21526 GP CIRCLE SIDE SHIFT CYLINDER
BORE SEAL KIT................................................AHC19979 CYLINDER..................................................,.......AHC22948
ROD SEAL KIT...................................................AHC16954 BORE SEAL KIT.................................................AHC19979
ROD SEAL KIT...................................................AHC16954
G BLADE SIDE SHIFT CYLINDER
CYLINDER.........................................................AHC16789 G SADDLE LOCKING PIN
BORE SEAL KIT..............................................AHC212097 CYLINDER...........................................................AT303325
ROD SEAL KIT..................................................AHC11572 SEAL KIT.............................................................AT303536

GP BLADE SIDE SHIFT CYLINDER GP SADDLE LOCKING PIN

CYLINDER.........................................................AHC22949 CYLINDER...........................................................AT442853
BORE SEAL KIT................................................AHC19979 SEAL KIT.............................................................AT444328
ROD SEAL KIT..................................................AHC11572

Apr. 2023. Release Date. *See operator’s manual for additional details.
 OILS SAMPLING INFORMATION

Part Description Part Number Qty Change Interval In Hours

Fluid Analysis Test Kits5

Diesel Engine Oil CM23882 1 250

Hydraulic Oil CM23882 1 500

Transmission Oil CM23882 1 500

Axle Oil CM23882 1 500

Tandem Axle Oil CM23882 2 500

6WD Hub Oil (if equipped) CM23882 2 500

Engine Coolant CM23882 1 500

4
2
4
See operator's manual for recommended oil type and oil viscosities based on operating temperatures.
5
Based on fluid analysis results, intervals may need to be adjusted for your operating conditions. Consult your local John Deere dealer.
Plus-50 is a trademark of Deere & Company
Hydrau is a trademark of Deere & Company
Hy-Gard is a trademark of Deere & Company
Cool-Gard is a trademark of Deere & Company

Apr. 2023. Release Date. *See operator’s manual for additional details.
 643L (PIN: 1DW643L_ _ _C666898— ) 643L (PIN: 1DW643L_ _ _D666898— )
Service Intervals
As Required
• Clean cooler cores • Fill and charge pressurized water system (if equipped)
• Inspect accessory drive belt • Check fire extinguisher charge
• Replace engine air cleaner elements • Lubricate cab door hinges
• Check tire pressure • Check cab recirculating air filter
• Check wheel bolt torque • Check cab fresh air filter
• Clean fuel tank inlet screen
Every 10 Hours or Daily
• Check engine coolant level • Clean engine air intake precleaner screen
• Check engine oil level • Check and clean engine air cleaner dust unloader valve
• Check hydraulic system oil level • Lubricate articulation points
• Check and drain primary fuel filter and water separator • Lubricate lift and tilt cylinders, arms, and links
• Check and drain auxiliary fuel filter and water separator
Every 100 Hours
• Lubricate front axle pinion seal and park brake seals • Lubricate rear axle pivots, pinion seal, and hydraulic steering cylinder pins
Initial Service—250 Hours 1
• Drain and refill axle oil • Drain and refill two-speed gear case oil
Every 250 Hours
• Take engine oil sample
Every 500 Hours
• Drain and refill engine oil and replace filter • Remove and clean open crankcase ventilation (OCV) hose
• Replace primary fuel filter and water separator • Check engine air intake hoses
• Replace auxiliary fuel filter and water separator • Take two-speed gear case oil sample
• Replace final fuel filter • Take hydraulic oil sample
• Check axle oil level • Take axle oil sample
• Check park brake oil level • Take park brake oil sample
• Check two-speed gear case oil level • Take engine coolant sample
• Lubricate front, rear, and articulation drive shafts • Take diesel fuel sample
Initial Service—1000 Hours 2
• Replace hydrostatic oil filter
Every 1000 Hours
• Drain and refill park brake oil • Drain and refill two-speed gear case oil
• Drain and refill axle oil • Check coolant condition
Initial Service—2000 Hours 3
• Replace hydraulic system oil filter
Every 2000 Hours
• Check and adjust engine valve lash • Inspect engine crankshaft damper
• Replace hydrostatic oil filter
Every 4000 Hours
• Drain and refill hydraulic system oil • Replace hydraulic reservoir breather filter
• Replace hydraulic system oil filter • Replace engine crankshaft damper
Every 6000 Hours
• Drain and refill engine cooling system

T335597X19 03NOV16
T335597X54-54 | T335597X63-63

Apr. 2023. Release Date. *See operator’s manual for additional details.