0% found this document useful (0 votes)
210 views2 pages

SmartPTT Installation Guide

The document provides instructions for installing the SmartPTT software which includes installing the radioserver software, programming the MotoTRBO radios, and installing the dispatcher console software. Hardware requirements include at least two PCs, one for the radioserver and one for the dispatcher console, although they can be installed on the same PC. It also requires a MotoTRBO base radio and subscriber radios. The radioserver and dispatcher console software installations create Windows services and require administrative privileges. Ports 8888, 4005, 4007, 4008, 18500, 18501 need to be open if the radioserver and dispatcher console are installed on separate PCs.

Uploaded by

lthuan123
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
210 views2 pages

SmartPTT Installation Guide

The document provides instructions for installing the SmartPTT software which includes installing the radioserver software, programming the MotoTRBO radios, and installing the dispatcher console software. Hardware requirements include at least two PCs, one for the radioserver and one for the dispatcher console, although they can be installed on the same PC. It also requires a MotoTRBO base radio and subscriber radios. The radioserver and dispatcher console software installations create Windows services and require administrative privileges. Ports 8888, 4005, 4007, 4008, 18500, 18501 need to be open if the radioserver and dispatcher console are installed on separate PCs.

Uploaded by

lthuan123
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

SmartPTT Installation Guide

Steps to install SmartPTT: PCs Installation, MotoTRBO Radios programming Radioserver Installation Dispatcher Console Installation

Hardware Requirements and Settings


2 PC-based computers for radioserver and dispatcher console. It is possible to install both radioserver and dispatcher software on the single PC for demonstration purposes. In this case, there must be 2 sound cards installed on the PC. MotoTRBO Base Radio (Mobile Radio) Connection cable (to connect base radio and radioserver) Subscriber MotoTRBO Radios

Guides for MotoTRBO programming and connection cable preparation are located at www.smartptt.com on the DOWNLOAD page.

SmartPTT Radioserver Installation


Radioserver software must be installed under account having administrative privileges. Radioserver software is installed from SmartPTT Radioserver setup package. Results of Radioserver installation: Windows service named SmartPTT Radio Service must present on the system and be running New menu item should appear at programs menu Start / Programs / SmartPTT / Radioserver Configurator (Radioserver configuration utility) Note! SmartPTT Radioserver is functional only at 32-bit operating systems: Windows XP/SP3, Windows Vista, Windows 7, Windows 2003 Server.

SmartPTT Dispatcher Installation


Dispatcher software must be installed under account having administrative privileges. Dispatcher software is installed from SmartPTT dispatcher setup package. SmartPTT dispatcher application requires MS SQL Server to store the database. If MS SQL Server is not present in intranet or is not available for SmartPTT database, MS SQL Express must be chosen during SmartPTT dispatcher installation.

On the first SmartPTT Dispatcher launch Configuration Wizard requires to set database connection options and load license file. All other settings may be specified later. Note! When database connection options are specified for the first time, it is necessary to create new database. SmartPTT Dispatcher Console is functional only at 32-bit operating systems: Windows XP/SP3, Windows Vista, Windows 7, Windows 2003 Server.

SmartPTT features
SmartPTT dispatcher application has functionality to add subscriber records manually, but more preferable way is automatic subscriber registration. If base and subscriber radios are tuned properly subscriber tree will be filled automatically in a few minutes. Note! When Radioserver and Dispatcher Consoles are installed on different PCs and Windows or some another Firewall is enabled, it is required to add exceptions for ports used by SmartPTT. Default SmartPTT port settings are: TCP 8888, UDP - 4005, 4007, 4008, 8888, 18500, 18501. Important! Before installation of Microsoft .Net Framework 4.0 at Windows 2003 Server or Windows XP SP2, following package must be installed: http://www.microsoft.com/downloads/en/details.aspx? FamilyId=8E011506-6307-445B-B950-215DEF45DDD8&displaylang=en (1.2Mb)

You might also like