Scribd
Upload
39 views

ASSIGNMENT

This document contains 12 questions related to construction materials for second year civil engineering students. It covers topics like: 1) Using Bogue's equation to determine the compound composition of Portland cement from raw material oxide compositions. 2) Finding the oxide composition of raw materials given the compound composition of a Portland cement. 3) Explaining the tests that would be conducted to examine cement properties and check conformity to national standards. 4) Recommending a gypsum type for a smooth and moisture resistant plaster in sanitary works. 5) Discussing the disadvantages of excess and low gypsum in cement production.

Uploaded by

Sami Boy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
39 views

ASSIGNMENT

This document contains 12 questions related to construction materials for second year civil engineering students. It covers topics like: 1) Using Bogue's equation to determine the compound composition of Portland cement from raw material oxide compositions. 2) Finding the oxide composition of raw materials given the compound composition of a Portland cement. 3) Explaining the tests that would be conducted to examine cement properties and check conformity to national standards. 4) Recommending a gypsum type for a smooth and moisture resistant plaster in sanitary works. 5) Discussing the disadvantages of excess and low gypsum in cement production.

Uploaded by

Sami Boy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

ADAMA SCIENCE AND TECHNOLOGY UNIVERSITY

SCHOOL OF CIVIL ENGINEERING AND ARCHITECTURE


DEPARTMENT OF ARCHITECTURE
ASSIGNMENT ON CONSTRUCTION MATERIAL FOR 2nd YEAR STUDENTS (15pt)
1. Determine the compound composition of Portland cement if it is manufactured from the raw
materials having the following oxide composition. [Use Bogue's equation]
i. CaO……………..63% iv. Fe2O3……………..3%

ii. SiO2……………..20% v. MgO……………1.5%

iii. Al2O3……………..6% vi. SO3……………….2%

2. A particular type of Portland cement is found to have the compound composition as follows: Find
the oxide composition of the raw materials
i. C3S……………….56.6% iv. C4AF………………6.08%
ii. C2S………………20.46% v. (SiO2)………………22%
iii. C3A……………….9.87% vi. Minor Compounds…..6.9
3. Let, you are an Engineer at National Cement factory and want to know the suitability of this
cement to be used on the construction site. What tests would you held to examine the properties
of the cement & check conformity with national standards, explain in details?
4. For a certain structure in sanitary works, it is specified to provide a smooth and moisture resistant
plaster, which gypsum type will you recommend? Why?
5. Discuss the disadvantages of excess and low amount of gypsum in cement production.

6. Differentiate between the final set, flash set & false set very shortly.

7. The compound compositions of four cements are provided below. Recommend the cement that
best fits for the listed site conditions shortly reason out.

C3S C 2S C3A C4AF


Cement 1 52 23 10 7
Cement 2 59 12 10 8
Cement 3 24 53 6 12
Cement 4 41 41 4 10

A) Pipe line constructions in sewage treatment works


B) Constructions in very hot climate

1 Instructor: Abdissa G. (MSc.), Email: abdissagaradew @mail. com , Office Block 516 R-102
C) Construction of a dam
D) Road repair works
E) Construction of a building under no special circumstances.
8. Calculate the fineness modulus for the following sand using the space provided in the table
below.

Sieve Size Weight Retained (g) % retained Cumulative % retained

#4 15

#8 60

#16 100

#30 105

#50 130

#100 90

Total 500

9. Define the following terms in cement concrete concept


A) Segregation C) Workability
B) Bleeding D) Consistency

10. Why mild steel carbon steel type is the common metal used in construction industry especially in
reinforced concrete structure?
11. What type of admixture would you recommend to be used
i) To facilitate concreting hot weather and
ii) For protecting hard concrete against cycles of freezing and thawing? Justify your reason?
12. What are the factors affecting the quality and strength of cement?

2 Instructor: Abdissa G. (MSc.), Email: abdissagaradew @mail. com , Office Block 516 R-102
Submission date: at the end of chapter four!!

3 Instructor: Abdissa G. (MSc.), Email: abdissagaradew @mail. com , Office Block 516 R-102

You might also like