PTO Applications

Tremec

Catalog HY25-3024/US
August 2002
Supersedes P400A-TRE August 1999
Bulletin HY25-2XXX-M1/US Power Take-Off
XXX Series

WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation
by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for
making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation
and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are
governed by the provisions stated in the "Offer of Sale".

© Copyright 2002, Parker Hannifin Corporation, All Rights Reserved

Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
 TREMEC TRANSMISSION INDEX

P.T.O. Number Teeth in

Transmission Make and Model Appl. Forward P.T.O.
Number Speeds Driver

CL-551 CLK-36 5 L19-R33

CL-557 CLK-37 5 L19-R30
CL-559A FLR-71 5 L19-R33
CL-559B FLR-71 5 L19-R33
CL-559C FLR-73 5 L19-R30
FSM-5005E (REF:SPICER ES54-5A) TRE-3 5 L33-R33
FSM-5005G TRE-5 5 L32-R32
FSM-5005H (REF:SPICER ES54-5C) TRE-4 5 L33-R33
FSM-5305E (REF:SPICER ES54-5A) TRE-3 5 L33-R33
FSM-5305G TRE-5 5 L32-R32
FSM-5305H (REF: SPICER ES54-5C) TRE-4 5 L33-R33
190F WRN-5 4 L36-R36
199F TRE-2 4 L36-R36

Transmission P.T.O. Driver & Aperatures (Viewed from Rear of Transmission)

IMPORTANT: See Safety Information in the
L-Left Side R-Right Side B-Bottom Side T-Top Side
Power Take-Off Safety & General
Information catalog HY25-3001/US. For transmission not listed, contact your authorized Chelsea Distributor.

1 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
CLK-36 CLARK Chelsea®
LEFT SIDE ONLY RIGHT SIDE ONLY

TRANSMISSION GEAR DATA: TRANSMISSION GEAR DATA:

L.H. 6-Bolt Opening - Gear to Rear of Centerline. R.H. 6-Bolt Opening - Gear Forward of Centerline.
19 Teeth - L.H. HELIX 33 Teeth - L.H. HELIX

PITCH LINE TO APERTURE FACE: PITCH LINE TO APERTURE FACE:

1.0850" (27.5600MM) .9880" (25.0950MM)

Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
Engine % Engine %
LEFT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
RIGHT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
Torq. Rot. Assy. Torq. Rot. Assy.
P.T.O. Model Hi Lo Rev P.T.O. Model Hi Lo Rev

ONE SPEED - SINGLE GEAR

100XRBMX-*3 (1) 125 Eng 66 Furnished

ONE SPEED - TWO GEAR

236XDAXX-*6 (2) 250 Eng 23 Furnished 236XDBMX-*3 (3) 250 Opp 41 Furnished
236XKAXX-*6 (2) 250 Eng 28 Furnished 236XKBMX-*3 (3) 250 Opp 52 Furnished
236XQAXX-*6 (2) 250 Eng 38 Furnished 236XQBMX-*3 (3) 250 Opp 71 Furnished
236XUAXX-*6 (2) 225 Eng 44 Furnished 236XUBMX-*3 (3) 225 Opp 81 Furnished
442XLAXX-*6 (2) 250 Eng 28 Furnished 442XFBMX-*3 (4) 250 Opp 39 Furnished
442XQAXX-*6 (2) 225 Eng 30 Furnished 442XLBMX-*3 (3) 250 Opp 51 Furnished
442XRAXX-*6 (2) 225 Eng 34 Furnished 442XQBMX-*3 (3) 225 Opp 55 Furnished
442XSAXX-*6 (2) 200 Eng 41 Furnished 442XRBMX-*3 (3) 225 Opp 63 Furnished
442XUAXX-*6 (2) 195 Eng 49 Furnished 442XSBMX-*3 (3) 200 Opp 75 Furnished
442XWAXX-*6 (2) 175 Eng 57 Furnished 442XUBMX-*3 (3) 195 Opp 90 Furnished
442XXAXX-*6 (2) 140 Eng 68 Furnished 442XWBMX-*3 (3) 175 Opp 106 Furnished
442XXBMX-*3 (3) 140 Opp 125 Furnished

ONE SPEED - DUAL SHAFT

452XSAXX-*6 (2) 140 Eng 42 Furnished 452XSBMX-*3 (3) 140 Opp 76 Furnished

ONE SPEED FORWARD & REVERSE

352XSAXX-*6 (2) 140 Eng 42 54 Furnished 352XSBMX-*3 (3) 140 Opp 76 99 Furnished

GEARED ADAPTERS
626XAXX-3HA Furnished 626XBMX-3HC Furnished
645XAXX-3HA Furnished 645XBMX-3HC Furnished

NOTE: If a 626 or 645 series geared adapter is used on the right side, the PTO input gear is the 5-P-1188 HC gear, and the 5-P-1020 BM gear is used in the adapter. If a
626XBM or 645XBM series geared adapter is going to be used, the PTO must be a deep mount (ex: 442Z*HC). Use a 7-A-165 filler block, gaskets to establish .006"
-.012" backlash, and a 7170-1X stud kit to mount the PTO to the adapter. Be aware that using a geared adapter will change the direction of PTO rotation, but will not
affect the speeds shown above.

(1) Gear and Shaft Kit No. KXA-2-P-576

(2) Input Gear Part No. 5-P-1010
(3) Input Gear Part No. 5-P-1020
(4) Input Gear Part No. 5-P-1083

August 2002

2 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Chelsea® CLARK CLK-37
LEFT SIDE ONLY RIGHT SIDE ONLY

TRANSMISSION GEAR DATA: TRANSMISSION GEAR DATA:

L.H. 6-Bolt Opening - Gear to Rear of Centerline. R.H. 6-Bolt Opening - Gear Forward of Centerline.
19 Teeth - L.H. HELIX 30 Teeth - L.H. HELIX

PITCH LINE TO APERTURE FACE: PITCH LINE TO APERTURE FACE:

1.0850" (27.5600MM) .8750" (22.2250MM)

Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
Engine % Engine %
LEFT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
RIGHT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
Torq. Rot. Assy. Torq. Rot. Assy.
P.T.O. Model Hi Lo Rev P.T.O. Model Hi Lo Rev

ONE SPEED - SINGLE GEAR

100XRBCX-*3 (1) 125 Eng 86 7-A-062 Furnished

ONE SPEED - TWO GEAR

236XDAXX-*6 (2) 250 Eng 27 Furnished 442KFBCX-*3 (3) 250 Opp 51 7-A-062 7170-2X
236XKAXX-*6 (2) 250 Eng 34 Furnished 442KLBCX-*3 (4) 250 Opp 67 7-A-062 7170-2X
236XQAXX-*6 (2) 250 Eng 46 Furnished 442KQBCX-*3 (4) 225 Opp 72 7-A-062 7170-2X
442XLAXX-*6 (2) 250 Eng 33 Furnished 442KRBCX-*3 (4) 225 Opp 83 7-A-062 7170-2X
442XQAXX-*6 (2) 225 Eng 35 Furnished 442KSBCX-*3 (4) 200 Opp 99 7-A-062 7170-2X
442XRAXX-*6 (2) 225 Eng 41 Furnished 442KUBCX-*3 (4) 195 Opp 118 7-A-062 7170-2X
442XSAXX-*6 (2) 200 Eng 49 Furnished 442KWBCX-*3 (4) 175 Opp 138 7-A-062 7170-2X
442XUAXX-*6 (2) 195 Eng 58 Furnished 442KXBCX-*3 (4) 140 Opp 164 7-A-062 7170-2X
442XWAXX-*6 (2) 175 Eng 68 Furnished

ONE SPEED - DUAL SHAFT

452XSAXX-*6 (2) 140 Eng 49 Furnished

ONE SPEED FORWARD & REVERSE

352XSAXX-*6 (2) 140 Eng 49 64 Furnished

GEARED ADAPTERS
626XAXX-3HA Furnished
645XAXX-3HA Furnished

NOTE: There are no adapters available for the right side apperture of this application.

(1) Gear and Shaft Kit No. KXA-2-P-568

(2) Input Gear Part No. 5-P-1010
(3) Input Gear Part No. 5-P-1081
(4) Input Gear Part No. 5-P-1012

August 2002

3 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
FLR-71 FULLER Chelsea®
LEFT SIDE ONLY RIGHT SIDE ONLY

TRANSMISSION GEAR DATA: TRANSMISSION GEAR DATA:

L.H. 6-Bolt Opening - Gear to Rear of Centerline. R.H. 6-Bolt Opening - Gear Forward of Centerline.
19 Teeth - L.H. HELIX 33 Teeth - L.H. HELIX

PITCH LINE TO APERTURE FACE: PITCH LINE TO APERTURE FACE:

1.0850" (27.5590MM) .9980" (25.3492MM)

Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
Engine % Engine %
LEFT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
RIGHT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
Torq. Rot. Assy. Torq. Rot. Assy.
P.T.O. Model Hi Lo Rev P.T.O. Model Hi Lo Rev

ONE SPEED - SINGLE GEAR

100XRBMX-*3 (1) 125 Eng 66 Furnished

ONE SPEED - TWO GEAR

236XDAXX-*6 (3) 250 Eng 23 Furnished 236XDBMX-*3 (4) 250 Opp 41 Furnished
236XKAXX-*6 (3) 250 Eng 28 Furnished 236XKBMX-*3 (4) 250 Opp 52 Furnished
236XQAXX-*6 (3) 250 Eng 38 Furnished 236XQBMX-*3 (4) 250 Opp 71 Furnished
236XUAXX-*6 (3) 225 Eng 44 Furnished 236XUBMX-*3 (4) 225 Opp 81 Furnished
442XLAXX-*6 (3) 250 Eng 28 Furnished 442XFBMX-*3 (5) 250 Opp 39 Furnished
442XQAXX-*6 (3) 225 Eng 30 Furnished 442XLBMX-*3 (4) 250 Opp 51 Furnished
442XRAXX-*6 (3) 225 Eng 34 Furnished 442XQBMX-*3 (4) 225 Opp 55 Furnished
442XSAXX-*6 (3) 200 Eng 41 Furnished 442XRBMX-*3 (4) 225 Opp 63 Furnished
442XUAXX-*6 (3) 195 Eng 49 Furnished 442XSBMX-*3 (4) 200 Opp 75 Furnished
442XWAXX-*6 (3) 175 Eng 57 Furnished 442XUBMX-*3 (4) 195 Opp 90 Furnished
442XXAXX-*6 (3) 140 Eng 68 Furnished 442XWBMX-*3 (4) 175 Opp 106 Furnished
442XXBMX-*3 (4) 140 Opp 125 Furnished

ONE SPEED - DUAL SHAFT

452XSAXX-*6 (3) 140 Eng 42 Furnished 452XSBMX-*3 (4) 140 Opp 76 Furnished

ONE SPEED FORWARD & REVERSE

352XSAXX-*6 (3) 140 Eng 42 54 Furnished 352XSBMX-*3 (4) 140 Opp 76 99 Furnished

GEARED ADAPTERS
626XAXX-3HA Furnished 626XBMX-3HC Furnished
645XAXX-3HA Furnished 645XBMX-3HC Furnished

NOTE: If a 626 or 645 series geared adapter is used on the right side, the PTO input gear is the 5-P-1188 HC gear, and the 5-P-1020 BM gear is used in the adapter. If a
626XBM or 645XBM series geared adapter is going to be used, the PTO must be a deep mount (ex: 442Z*HC). Use a 7-A-165 filler block, gaskets to establish .006"
-.012" backlash, and a 7170-1X stud kit to mount the PTO to the adapter. Be aware that using a geared adapter will change the direction of PTO rotation, but will not
affect the speeds shown above.

(1) Input Gear Part No. 5-P-76

(2) Gear and Shaft Kit No. KXA-2-P-576
(3) Input Gear Part No. 5-P-1010
(4) Input Gear Part No. 5-P-1020
(5) Input Gear Part No. 5-P-1083

August 2002

4 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Chelsea® FULLER FLR-73
LEFT SIDE ONLY RIGHT SIDE ONLY

TRANSMISSION GEAR DATA: TRANSMISSION GEAR DATA:

L.H. 6-Bolt Opening - Gear to Rear of Centerline. R.H. 6-Bolt Opening - Gear Forward of Centerline.
19 Teeth - L.H. HELIX 30 Teeth - L.H. HELIX

PITCH LINE TO APERTURE FACE: PITCH LINE TO APERTURE FACE:

1.0850" (27.5590MM) .8750" (22.2250MM)

Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
Engine % Engine %
LEFT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
RIGHT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
Torq. Rot. Assy. Torq. Rot. Assy.
P.T.O. Model Hi Lo Rev P.T.O. Model Hi Lo Rev

ONE SPEED - SINGLE GEAR

100XRBCX-*3 (1) 125 Eng 86 7-A-062 Furnished

ONE SPEED - TWO GEAR

236XDAXX-*6 (2) 250 Eng 27 Furnished 442KFBCX-*3 (3) 250 Opp 51 7-A-062 7170-2X
236XKAXX-*6 (2) 250 Eng 34 Furnished 442KLBCX-*3 (4) 250 Opp 67 7-A-062 7170-2X
236XQAXX-*6 (2) 250 Eng 46 Furnished 442KQBCX-*3 (4) 225 Opp 72 7-A-062 7170-2X
236XUAXX-*6 (2) 225 Eng 52 Furnished 442KRBCX-*3 (4) 225 Opp 83 7-A-062 7170-2X
442XLAXX-*6 (2) 250 Eng 33 Furnished 442KSBCX-*3 (4) 200 Opp 99 7-A-062 7170-2X
442XQAXX-*6 (2) 225 Eng 35 Furnished 442KUBCX-*3 (4) 195 Opp 118 7-A-062 7170-2X
442XRAXX-*6 (2) 225 Eng 41 Furnished 442KWBCX-*3 (4) 175 Opp 138 7-A-062 7170-2X
442XSAXX-*6 (2) 200 Eng 49 Furnished 442KXBCX-*3 (4) 140 Opp 164 7-A-062 7170-2X
442XUAXX-*6 (2) 195 Eng 58 Furnished
442XWAXX-*6 (2) 175 Eng 68 Furnished
442XXAXX-*6 (2) 140 Eng 80 Furnished

ONE SPEED - DUAL SHAFT

452XSAXX-*6 (2) 140 Eng 49 Furnished 452KSBCX-*3 (4) 140 Opp 100 7-A-062 7170-2X

ONE SPEED FORWARD & REVERSE

352XSAXX-*6 (2) 140 Eng 49 64 Furnished 352KSBCX-*3 (4) 140 Opp 100 129 7-A-062 7170-2X

GEARED ADAPTERS
626XAXX-3HA Furnished
645XAXX-3HA Furnished

NOTE: There are no adapters available for the right side apperture of this application.

(1) Gear and Shaft Kit No. KXA-2-P-568

(2) Input Gear Part No. 5-P-1010
(3) Input Gear Part No. 5-P-1081
(4) Input Gear Part No. 5-P-1012

August 2002

5 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
TRE-2 TREMEC Chelsea®
LEFT SIDE ONLY RIGHT SIDE ONLY

TRANSMISSION GEAR DATA: TRANSMISSION GEAR DATA:

L.H. 6-Bolt Opening - Gear Forward of Centerline. R.H. 6-Bolt Opening - Gear Forward of Centerline.
36 Teeth - R.H. HELIX 36 Teeth - R.H. HELIX

PITCH LINE TO APERTURE FACE: PITCH LINE TO APERTURE FACE:

1.1240" (28.5496MM) 1.1240" (28.5496MM)

Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
Engine % Engine %
LEFT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
RIGHT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
Torq. Rot. Assy. Torq. Rot. Assy.
P.T.O. Model Hi Lo Rev P.T.O. Model Hi Lo Rev

ONE SPEED - TWO GEAR

236XDGQX-*5 (1) 250 Opp 32 Furnished 236XDGQX-*3 (1) 250 Opp 32 Furnished
236XKGQX-*5 (1) 250 Opp 42 Furnished 236XKGQX-*3 (1) 250 Opp 42 Furnished
236XQGQX-*5 (1) 250 Opp 56 Furnished 236XQGQX-*3 (1) 250 Opp 56 Furnished
236XUGQX-*5 (1) 225 Opp 64 Furnished 236XUGQX-*3 (1) 225 Opp 64 Furnished
442XFGQX-*5 (2) 250 Opp 31 Furnished 442XFGQX-*3 (2) 250 Opp 31 Furnished
442XLGQX-*5 (1) 250 Opp 40 Furnished 442XLGQX-*3 (1) 250 Opp 40 Furnished
442XQGQX-*5 (1) 225 Opp 43 Furnished 442XQGQX-*3 (1) 225 Opp 43 Furnished
442XRGQX-*5 (1) 225 Opp 50 Furnished 442XRGQX-*3 (1) 225 Opp 50 Furnished
442XSGQX-*5 (1) 200 Opp 60 Furnished 442XSGQX-*3 (1) 200 Opp 60 Furnished
442XUGQX-*5 (1) 195 Opp 71 Furnished 442XUGQX-*3 (1) 195 Opp 71 Furnished
442XWGQX-*5 (1) 175 Opp 84 Furnished 442XWGQX-*3 (1) 175 Opp 84 Furnished
442XXGQX-*5 (1) 140 Opp 99 Furnished 442XXGQX-*3 (1) 140 Opp 99 Furnished

GEARED ADAPTERS
626XGQX-4HS Furnished 626XGQX-3HS Furnished
645XGQX-4HS Furnished 645XGQX-3HS Furnished

(1) Input Gear Part No. 5-P-1150

(2) Input Gear Part No. 5-P-1149

August 2002

6 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Chelsea® TREMEC TRE-3
LEFT SIDE ONLY RIGHT SIDE ONLY

TRANSMISSION GEAR DATA: TRANSMISSION GEAR DATA:

L.H. 6-Bolt Opening - Gear Forward of Centerline. R.H. 6-Bolt Opening - Gear Forward of Centerline.
33 Teeth - R.H. HELIX 33 Teeth - R.H. HELIX

PITCH LINE TO APERTURE FACE: PITCH LINE TO APERTURE FACE:

1.0310" (26.1800MM) 1.0320" (26.1800MM)

Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
Engine % Engine %
LEFT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
RIGHT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
Torq. Rot. Assy. Torq. Rot. Assy.
P.T.O. Model Hi Lo Rev P.T.O. Model Hi Lo Rev

ONE SPEED - TWO GEAR

236XDBMX-*5 (1) 250 Opp 41 Furnished 236XDBMX-*3 (1) 250 Opp 41 Furnished
236XKBMX-*5 (1) 250 Opp 52 Furnished 236XKBMX-*3 (1) 250 Opp 52 Furnished
236XQBMX-*5 (1) 250 Opp 71 Furnished 236XQBMX-*3 (1) 250 Opp 71 Furnished
236XUBMX-*5 (1) 225 Opp 81 Furnished 236XUBMX-*3 (1) 225 Opp 81 Furnished
442XFBMX-*5 (2) 250 Opp 39 Furnished 442XFBMX-*3 (2) 250 Opp 39 Furnished
442XLBMX-*5 (1) 250 Opp 51 Furnished 442XLBMX-*3 (1) 250 Opp 51 Furnished
442XQBMX-*5 (1) 225 Opp 55 Furnished 442XQBMX-*3 (1) 225 Opp 55 Furnished
442XRBMX-*5 (1) 225 Opp 63 Furnished 442XRBMX-*3 (1) 225 Opp 63 Furnished
442XSBMX-*5 (1) 200 Opp 75 Furnished 442XSBMX-*3 (1) 200 Opp 75 Furnished
442XUBMX-*5 (1) 195 Opp 90 Furnished 442XUBMX-*3 (1) 195 Opp 90 Furnished
442XWBMX-*5 (1) 175 Opp 105 Furnished 442XWBMX-*3 (1) 175 Opp 105 Furnished
442XXBMX-*5 (1) 140 Opp 125 Furnished 442XXBMX-*3 (1) 140 Opp 125 Furnished

ONE SPEED - DUAL SHAFT

452XSBMX-*3 (1) 140 Opp 76 Furnished 452XSBMX-*3 (1) 140 Opp 76 Furnished

ONE SPEED FORWARD & REVERSE

352XSBMX-*5 (1) 140 Opp 76 98 Furnished 352XSBMX-*3 (1) 140 Opp 76 98 Furnished

GEARED ADAPTERS
626XBMX-4HC Furnished 626XBMX-3HC Furnished
645XBMX-4HC Furnished 645XBMX-3HC Furnished

NOTE: If a 626 or 645 series geared adapter is used on this transmission, the PTO input gear is the 5-P-1188 HC gear, and the 5-P-1020 BM gear is used in the adapter.
If a 626XBM or 645XBM series geared adapter is going to be used, the PTO must be a deep mount (ex: 442Z*HC). Use a 7-A-165 filler block, gaskets to establish .006"
-.012" backlash, and a 7170-1X stud kit to mount the PTO to the adapter. Be aware that using a geared adapter will change the direction of PTO rotation, but will not
affect the speeds shown above.

(1) Input Gear Part No. 5-P-1020

(2) Input Gear Part No. 5-P-1083

August 2002

7 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
TRE-4 TREMEC Chelsea®
LEFT SIDE ONLY RIGHT SIDE ONLY

TRANSMISSION GEAR DATA: TRANSMISSION GEAR DATA:

L.H. 6-Bolt Opening - Gear Forward of Centerline. R.H. 6-Bolt Opening - Gear Forward of Centerline.
33 Teeth - R.H. HELIX 33 Teeth - R.H. HELIX

PITCH LINE TO APERTURE FACE: PITCH LINE TO APERTURE FACE:

1.0310" (26.1800MM) 1.0310" (26.1800MM)

Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
Engine % Engine %
LEFT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
RIGHT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
Torq. Rot. Assy. Torq. Rot. Assy.
P.T.O. Model Hi Lo Rev P.T.O. Model Hi Lo Rev

ONE SPEED - TWO GEAR

236XDBMX-*5 (1) 250 Opp 49 Furnished 236XDBMX-*3 (1) 250 Opp 49 Furnished
236XKBMX-*5 (1) 250 Opp 62 Furnished 236XKBMX-*3 (1) 250 Opp 62 Furnished
236XQBMX-*5 (1) 250 Opp 84 Furnished 236XQBMX-*3 (1) 250 Opp 84 Furnished
236XUBMX-*5 (1) 225 Opp 96 Furnished 236XUBMX-*3 (1) 225 Opp 96 Furnished
442XFBMX-*5 (2) 250 Opp 46 Furnished 442XFBMX-*3 (2) 250 Opp 46 Furnished
442XLBMX-*5 (1) 250 Opp 60 Furnished 442XLBMX-*3 (1) 250 Opp 60 Furnished
442XQBMX-*5 (1) 225 Opp 64 Furnished 442XQBMX-*3 (1) 225 Opp 64 Furnished
442XRBMX-*5 (1) 225 Opp 75 Furnished 442XRBMX-*3 (1) 225 Opp 75 Furnished
442XSBMX-*5 (1) 200 Opp 89 Furnished 442XSBMX-*3 (1) 200 Opp 89 Furnished
442XUBMX-*5 (1) 195 Opp 106 Furnished 442XUBMX-*3 (1) 195 Opp 106 Furnished
442XWBMX-*5 (1) 175 Opp 125 Furnished 442XWBMX-*3 (1) 175 Opp 125 Furnished
442XXBMX-*5 (1) 140 Opp 147 Furnished 442XXBMX-*3 (1) 140 Opp 147 Furnished

ONE SPEED - DUAL SHAFT

452XSBMX-*3 (1) 140 Opp 90 Furnished 452XSBMX-*3 (1) 140 Opp 90 Furnished

ONE SPEED FORWARD & REVERSE

352XSBMX-*3 (1) 140 Opp 90 116 Furnished 352XSBMX-*3 (1) 140 Opp 90 116 Furnished

GEARED ADAPTERS
626XBMX-4HC Furnished 626XBMX-3HC Furnished
645XBMX-4HC Furnished 645XBMX-3HC Furnished

NOTE: If a 626 or 645 series geared adapter is used on this transmission, the PTO input gear is the 5-P-1188 HC gear, and the 5-P-1020 BM gear is used in the adapter.
If a 626XBM or 645XBM series geared adapter is going to be used, the PTO must be a deep mount (ex: 442Z*HC). Use a 7-A-165 filler block, gaskets to establish .006"
-.012" backlash, and a 7170-1X stud kit to mount the PTO to the adapter. Be aware that using a geared adapter will change the direction of PTO rotation, but will not
affect the speeds shown above.

(1) Input Gear Part No. 5-P-1020

(2) Input Gear Part No. 5-P-1083

August 2002

8 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Chelsea® TREMEC TRE-5
LEFT SIDE ONLY RIGHT SIDE ONLY

TRANSMISSION GEAR DATA: TRANSMISSION GEAR DATA:

L.H. 6-Bolt Opening - Gear Forward of Centerline. R.H. 6-Bolt Opening - Gear Forward of Centerline.
32 Teeth - R.H. HELIX 32 Teeth - R.H. HELIX

PITCH LINE TO APERTURE FACE: PITCH LINE TO APERTURE FACE:

.7340" (18.6436MM) .7340" (18.6436MM)

Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
Engine % Engine %
LEFT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
RIGHT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
Torq. Rot. Assy. Torq. Rot. Assy.
P.T.O. Model Hi Lo Rev P.T.O. Model Hi Lo Rev

ONE SPEED - TWO GEAR

442XLJDX-*5 (1) 250 Opp 57 7-A-375 7170-5X 442XLJDX-*3 (1) 250 Opp 57 7-A-375 7170-5X
442XQJDX-*5 (1) 225 Opp 62 7-A-375 7170-5X 442XQJDX-*3 (1) 225 Opp 62 7-A-375 7170-5X
442XRJDX-*5 (1) 225 Opp 71 7-A-375 7170-5X 442XRJDX-*3 (1) 225 Opp 71 7-A-375 7170-5X
442XSJDX-*5 (1) 200 Opp 85 7-A-375 7170-5X 442XSJDX-*3 (1) 200 Opp 85 7-A-375 7170-5X
442XUJDX-*5 (1) 195 Opp 101 7-A-375 7170-5X 442XUJDX-*3 (1) 195 Opp 101 7-A-375 7170-5X
442XWJDX-*5 (1) 175 Opp 119 7-A-375 7170-5X 442XWJDX-*3 (1) 175 Opp 119 7-A-375 7170-5X
442XXJDX-*5 (1) 140 Opp 141 7-A-375 7170-5X 442XXJDX-*3 (1) 140 Opp 141 7-A-375 7170-5X

GEARED ADAPTERS
626XJDX-4JE 7-A-375 7170-5X 626XJDX-3JE 7-A-375 7170-5X
645XJDX-4JE 7-A-375 7170-5X 645XJDX-3JE 7-A-375 7170-5X

NOTE: A 7-A-200 spacer and 7170-4X stud kit are required to mount the 442 series to the adapter

(1) Input Gear Part No. 5-P-1248

August 2002

9 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
WRN-5 WARNER Chelsea®
LEFT SIDE ONLY RIGHT SIDE ONLY

TRANSMISSION GEAR DATA: TRANSMISSION GEAR DATA:

L.H. 6-Bolt Opening - Gear to Rear of Centerline. R.H. 6-Bolt Opening - Gear to Rear of Centerline.
36 Teeth - R.H. HELIX 36 Teeth - R.H. HELIX

PITCH LINE TO APERTURE FACE: PITCH LINE TO APERTURE FACE:

1.0850" (27.5600MM) 1.0850" (27.5600MM)

Caution: Application Approval Required for P.T.O. Output Shaft Speeds Above 2500 R.P.M.
Engine % Engine %
LEFT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
RIGHT Side Inter. Dir.
Filler Block
Adapter
Stud Kit
Torq. Rot. Assy. Torq. Rot. Assy.
P.T.O. Model Hi Lo Rev P.T.O. Model Hi Lo Rev

ONE SPEED - SINGLE GEAR

100XRBZX-*4 (1) 125 Eng 51 Furnished

ONE SPEED - TWO GEAR

442XLBZX-*6 (2) 250 Opp 40 Furnished 442XLBZX-*4 (2) 250 Opp 40 Furnished
442XQBZX-*6 (2) 225 Opp 43 Furnished 442XQBZX-*4 (2) 225 Opp 43 Furnished
442XRBZX-*6 (2) 225 Opp 50 Furnished 442XRBZX-*4 (2) 225 Opp 50 Furnished
442XSBZX-*6 (2) 200 Opp 60 Furnished 442XSBZX-*4 (2) 200 Opp 60 Furnished
442XUBZX-*6 (2) 195 Opp 71 Furnished 442XUBZX-*4 (2) 195 Opp 71 Furnished
442XWBZX-*6 (2) 175 Opp 84 Furnished 442XWBZX-*4 (2) 175 Opp 84 Furnished
442XXBZX-*6 (2) 140 Opp 99 Furnished 442XXBZX-*4 (2) 140 Opp 99 Furnished

ONE SPEED - DUAL SHAFT

452XSBZX-*6 (2) 140 Opp 60 Furnished 452XSBZX-*6 (2) 140 Opp 60 Furnished

ONE SPEED FORWARD & REVERSE

352XSBZX-*6 (2) 140 Opp 60 78 Furnished 352XSBZX-*4 (2) 140 Opp 60 78 Furnished

NOTE: T-18 available with opening on right or left side.

NOTE: Navistar Model #T-427 for T-19 has both right and left hand openings.
NOTE: No adapters available for this application.

(1) Gear and Shaft Kit No. KXA-2-P-583

(2) Input Gear Part No. 5-P-1028

August 2002

10 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
 NOTES

11 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
NOTES

12 Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
Offer of Sale
The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized
distributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This
offer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s order for any such items,
when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute
acceptance of this offer.
1. Terms and Conditions of Sale: All descriptions, quotations, propos- have the right to alter, discard or otherwise dispose of any special tooling
als, offers, acknowledgments, acceptances and sales of Seller’s prod- or other property in its sole discretion at any time.
ucts are subject to and shall be governed exclusively by the terms and 8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,
conditions stated herein. Buyer’s acceptance of any offer to sell is limited confidential information or equipment furnished by Buyer or any other
to these terms and conditions. Any terms or conditions in addition to, or items which become Buyer’s property, may be considered obsolete and
inconsistent with those stated herein, proposed by Buyer in any accep- may be destroyed by Seller after two (2) consecutive years have elapsed
tance of an offer by Seller, are hereby objected to. No such additional, without Buyer placing an order for the items which are manufactured
different or inconsistent terms and conditions shall become part of the using such property, Seller shall not be responsible for any loss or
contract between Buyer and Seller unless expressly accepted in writing damage to such property while it is in Seller’s possession or control.
by Seller. Seller’s acceptance of any offer to purchase by Buyer is 9. Taxes: Unless otherwise indicated on the face hereof, all prices and
expressly conditional upon Buyer’s assent to all the terms and conditions charges are exclusive of excise, sales, use, property, occupational or like
stated herein, including any terms in addition to, or inconsistent with taxes which may be imposed by any taxing authority upon the manufac-
those contained in Buyer’s offer, Acceptance of Seller’s products shall in ture, sale or delivery of the items sold hereunder. If any such taxes must
all events constitute such assent. be paid by Seller or if Seller is liable for the collection of such tax, the
2. Payment: Payment shall be made by Buyer net 30 days from the date of amount thereof shall be in addition to the amounts for the items sold. Buyer
delivery of the items purchased hereunder. Amounts not timely paid shall agrees to pay all such taxes or to reimburse Seller therefore upon receipt
bear interest at the maximum rate permitted by law for each month or portion of its invoice. If Buyer claims exemption from any sales, use or other tax
thereof that the Buyer is late in making payment. Any claims by Buyer for imposed by any taxing authority, Buyer shall save Seller harmless from
omissions or shortages in a shipment shall be waived unless Seller receives and against any such tax, together with any interest or penalties thereon
notice thereof within 30 days after Buyer’s receipt of the shipment. which may be assessed if the items are held to be taxable.
3. Delivery: Unless otherwise provided on the face hereof, delivery shall 10. Indemnity For Infringement of Intellectual Property Rights:
be made F.O.B. Seller’s plant. Regardless of the method of delivery, Seller shall have no liability for infringement of any patents, trademarks,
however, risk of loss shall pass to Buyer upon Seller’s delivery to a copyrights, trade dress, trade secrets or similar rights except as provided
carrier. Any delivery dates shown are approximate only and Seller shall in this Part 10. Seller will defend and indemnify Buyer against allegations
have no liability for any delays in delivery. of infringement of U.S. Patents, U.S. Trademarks, copyrights, trade
4. Warranty: Seller warrants that the items sold hereunder shall be free dress and trade secrets (hereinafter ‘Intellectual Property Rights’). Seller
from defects in material or workmanship for a period of: will defend at its expense and will pay the cost of any settlement or
(A) All Power Take-Off units one (1) year from date of installation. damages awarded in an action brought against Buyer based on an
(B) Except 267, 277, 278, 242, 244, 250, 251 and 859 series two (2) years allegation that an item sold pursuant to this contract infringes the
from date of installation. THIS WARRANTY COMPRISES THE SOLE Intellectual Property Rights of a third party. Seller’s obligation to defend
AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HERE- and indemnify Buyer is contingent on Buyer notifying Seller within ten
UNDER. SELLER MAKES NO OTHER WARRANTY, GUARANTEE, (10) days after Buyer becomes aware of such allegations of infringe-
OR REPRESENTATION OF ANY KIND WHATSOEVER. ALL OTHER ment, and Seller having sole control over the defense of any allegations
WARRANTIES, INCLUDING BUT NOT LIMITED TO, MERCHANT- or actions including all negotiations for settlement or compromise. If an
ABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS, IM- item sold hereunder is subject to a claim that it infringes the Intellectual
PLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, OR Property Rights of a third party, Seller may, at its sole expense and
COURSE OF DEALING ARE HEREBY DISCLAIMED. NOTWITH- option, procure for Buyer the right to continue using said item, replace or
STANDING THE FOREGOING, THERE ARE NO WARRANTIES WHAT- modify said item so as to make it noninfringing, or offer to accept return
SOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR PAR- of said item and return the purchase price less a reasonable allowance
TIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS. for depreciation. Notwithstanding the foregoing, Seller shall have no
5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR liability for claims of infringement based on information provided by
IN ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CON- Buyer, or directed to items delivered hereunder for which the designs are
TRACT SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR RE- specified in whole or part by Buyer, or infringements resulting from the
PLACEMENT OF THE ITEMS SOLD OR REFUND OF THE PUR- modification, combination or use in a system of any item sold hereunder.
CHASE PRICE PAID BY BUYER, AT SELLER’S SOLE OPTION. IN NO The foregoing provisions of this Part 10 shall constitute Seller’s sole and
EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CON- exclusive liability and Buyer’s sole and exclusive remedy for infringe-
SEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE ment of Intellectual Property Rights.
WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS If a claim is based on information provided by Buyer or if the design for
ARISING FROM OR IN ANY WAY CONNECTED WITH THIS AGREE- an item delivered hereunder is specified in whole or in part by Buyer,
MENT OR ITEMS SOLD HEREUNDER, WHETHER ALLEGED TO Buyer shall defend and indemnify Seller for all costs, expenses or
ARISE FROM BREACH OF CONTRACT, EXPRESS OR IMPLIED judgments resulting from any claim that such item infringes any patent,
WARRANTY, OR IN TORT, INCLUDING WITHOUT LIMITATION, trademark, copyright, trade dress, trade secret or any similar right.
NEGLIGENCE, FAILURE TO WARN OR STRICT LIABILITY. 11. Force Majeure: Seller does not assume the risk of and shall not be
6. Changes, Reschedules and Cancellations: Buyer may request to liable for delay or failure to perform any of Seller’s obligations by reason
modify the designs or specifications for the items sold hereunder as well of circumstances beyond the reasonable control of Seller (hereinafter
as the quantities and delivery dates thereof, or may request to cancel all ‘Events of Force Majeure’). Events of Force Majeure shall include
or part of this order, however, no such requested modification or without limitation, accidents, acts of God, strikes or labor disputes, acts,
cancellation shall become part of the contract between Buyer and Seller laws, rules or regulations of any government or government agency,
unless accepted by Seller in a written amendment to this Agreement. fires, floods, delays or failures in delivery of carriers or suppliers,
Acceptance of any such requested modification or cancellation shall be shortages of materials and any other cause beyond Seller’s control.
at Seller’s discretion, and shall be upon such terms and conditions as 12. Entire Agreement/Governing Law: The terms and conditions set
Seller may require. forth herein, together with any amendments, modifications and any
7. Special Tooling: A tooling charge may be imposed for any special different terms or conditions expressly accepted by Seller in writing, shall
tooling, including without limitation, dies, fixtures, molds and patterns, constitute the entire Agreement concerning the items sold, and there are
acquired to manufacture items sold pursuant to this contract. Such no oral or other representations or agreements which pertain there/to.
special tooling shall be and remain Seller’s property notwithstanding This Agreement shall be governed in all respects by the law of the State
payment of any charges by Buyer. In no event will Buyer acquire any of Ohio. No actions arising out of the sale of the items sold hereunder or
interest in apparatus belonging to Seller which is utilized in the manufac- this Agreement may be brought by either party more than two (2) years
ture of the items sold hereunder, even if such apparatus has been after the cause of action accrues.
specially converted or adapted for such manufacture and notwithstand-
ing any charges paid by Buyer. Unless otherwise agreed, Seller shall 9/01-P

Parker Hannifin Corporation

Chelsea Products Division
Olive Branch, MS 38654 USA
 Hydraulics Group
Sales Offices

Integrated Hydraulics Division

595 Schelter Road
Lincolnshire, IL 60069
Phone: (847) 955-5000
Fax: (847) 821-9622
www.parker.com/ihd

Parker Hannifin Corporation Catalog HY25-3024/US,

Chelsea Products Division 8M, 08/02, TG
8225 Hacks Cross Road
Olive Branch, MS 38654 USA
Phone: (662) 895-1011
Fax: (662) 895-1019
www.parker.com/chelsea