Scribd
Upload
15 views

Engine Intallation and Test On Machine Form - MinSD2

This document provides instructions for inspecting an engine. It lists items to check before starting the engine, while operating the engine, and topics to instruct the owner on for maintenance. The inspection includes checking mounts, leaks, systems, belts, gauges, performance, and temperatures. Records of maximum power measurements are also to be made. The owner or representative is to be instructed and sign off to confirm the inspection was performed.

Uploaded by

Harry Rahmad
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
15 views

Engine Intallation and Test On Machine Form - MinSD2

This document provides instructions for inspecting an engine. It lists items to check before starting the engine, while operating the engine, and topics to instruct the owner on for maintenance. The inspection includes checking mounts, leaks, systems, belts, gauges, performance, and temperatures. Records of maximum power measurements are also to be made. The owner or representative is to be instructed and sign off to confirm the inspection was performed.

Uploaded by

Harry Rahmad
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ENGINE SERIAL NUMBER ENGINE MODEL

1 MARK WARRANTY START DATE ON ENGINE DATA PLATE

2 CHECK BEFORE STARTING ENGINE (ADJUST AS REQUIRED)


… Engine and accessory Mounting
… Fuel, Lube oil, or Coolant Leakage
… Fuel System Installation
… Lube Oil System Installation and Oil Level
… Air cleaner
… Engine Breather
… All Belt Tensions
… Hydraulic Governor Oil Level (Genset)
… Greasing Front Support

3 CHECK WHILE OPERATING ENGINE


… For unusual noises
… Throttle Operation
… Fuel, Lube Oil, or Coolant Leakage
… Operating of gauges and Safety Controls
… Engine Performance
… Air Induction System
… Check and Adjust Generator Voltage (Gensets)
… Check and Adjust Generator Frequency (Gensets)

4 INSTRUCT OWNER IN
… Changing Fuel and Lube Oil Filters
… Changing Oil
… Use of Phroper Fuel and Lubricating Oil
… Operating Temperature
… Starting and Stopping Procedure
… Damages caused By Over Speeding
… Use of Corrosion inhibitor and antifreeze
… Use of Cold Starting Device
… Air Cleaner Maintenance
… Belt Maintenance
… Warranty Coverage

Remarks:
- Check End Play Before Connect:
- Check End Play After Connect :

THE INSPECTION HAS BEEN PERFORMED AND THE CUSTOMER OR HIS REPRESENTATIVE HAS BEEN ISTRUCTED
AS LIST ABOVE

INSPECTION CARRIED OUT BY

WITNESS/CERTIFIED BY OWNER/CUTOMER REPRESENTATIVE__________________________________ DATE


RECORD WITH AT MAXIMUM POWER/FULL THROTTLE
Engine Speed Fuel Rail Pressure Engine Oil Pressure Charging Current

_________________ rpm _______________ rpm _______________ rpm


Intake Manifold Pressure Exhaust Temperature Exhaust Temperature Engine Water Temperature

_____________ rpm _______________ rpm _____________ rpm _____________ rpm

THE INSPECTION HAS BEEN PERFORMED AND THE COSTUMER OR HIS PRESENTATION AS BEEN INSTRUCTED AS LISTED ABOVE
INSPECTION CARRIED OUT BY_____________________ COSTUMER SIGNATURE & STAMP
DATE :
SIGNATURE_____________________________
DATE___________________________________ [________________________________]

Form No : 003-2/MinSD/NEI/09

You might also like