Page 1 of 3

a. Calibration – Performance measurement to ensure the overall functionality of the medical equipment
is accurate and reliable.

Equipment Parameters UOM CMC Reference Equipment Method(s)

Oxygen Flow Meter

Flow Meter lpm ---
(0 – 20 lpm)
CAL – ETP – 02, ECRI
Tidal Volume ml --- Biomedical
Anesthesia Unit with
Benchmark –
Ventilator
Respiration Rate bpm --- Procedure No. 400
Calibration Analyzer – 20081015-01
I:E Ratio sec ---

PEEP cmH2O ---

CAL – ETP – 03, ECRI

Concentration, Anesthetic Gas Health Devices IPM
Anesthesia Vaporizer % ---
Gas Indicator System – Procedure
No. 436-0595

Pressure, Vacuum mmHg --- Digital Pressure Meter CAL – ETP – 04, ECRI
Health Devices IPM
Aspirator
Time, Vacuum System – Procedure
sec --- Digital Stopwatch No. 433 - 0595
Rise

Temperature ˚C --- Thermocouple CAL – ETP – 05, ECRI

Biomedical
Centrifuge Time min --- Digital Stopwatch Benchmark –
Procedure No. 456
Speed rpm --- Digital Tachometer – 20110630-01

CAL – ETP – 06, ECRI

Biomedical
CPAP & BIPAP Pressure cmH2O --- Calibration Analyzer Benchmark –
Procedure No. 500
– 20131008 – 01

Energy joules --- CAL – ETP – 07, ECRI

Biomedical
Defibrillator Defibrillator Analyzer Benchmark –
Rate, Heart bpm --- Procedure No. 408
– 20130724 – 01

Rate, Heart bpm --- Patient Simulator CAL – ETP – 08, ECRI
Biomedical
ECG Machine Amplitude mm/mV --- Benchmark –
ECG Ruler Procedure No. 410
Speed, Recorder mm/sec --- – 2013 0829-01

CAL – ETP – 09, ECRI

Biomedical
Electrosurgical Power, Cut watts --- ESU Analyzer Benchmark –
Procedure No. 411
– 20131217-01

Biomedical Instrumentation & Technology Solutions Co. Ltd.

RLI Bldg. 3 Southpoint Subdivision Brgy. Banay-Banay Cabuyao, Laguna Philippines 4025
Phone: 049 535 6158 | Email: [email protected]
 Page 2 of 3

CAL – ETP – 10,

Rate,
Fetal Monitor bpm --- Fetal Simulator Fluke Medical
Fetal/Monitor
Equipment Quality

Relative Humidity rh --- Thermohygrometer

CAL – ETP – 11, ECRI
Biomedical
Noise Level db --- Sound Level Meter
Infant Incubator Benchmark –
Procedure No. 415
Temperature,
˚C --- Thermometer – 20081015-01
Air/Skin

Pressure,
psi --- CAL – ETP -12, ECRI
Occlusion
Biomedical
Infusion Device Infusion Pump Analyzer Benchmark –
Rate, Flow ml/hr ---
Procedure No. 416
– 20081015-01
Volume ml ---

Nebulizer Pressure psi --- Digital Pressure Meter CAL – ETP – 13

Oxygen Concentration,
% --- Oxygen Analyzer CAL – ETP – 14
Concentrator Oxygen

Rate, Heart bpm --- Patient Simulator

CAL – ETP – 15, ECRI
Pressure, Biomedical
mmhg --- NIBP Simulator
Patient Monitor Dynamic Benchmark –
Procedure No. 493
Saturation, – 20081015 – 01
% --- SPO2 Simulator
Oxygen

Rate, Pulse bpm --- Patient Simulator CAL – ETP – 16, ECRI
Biomedical
Patient Scale Benchmark –
Saturation,
% --- SPO2 Simulator Procedure No. 497
Oxygen – 20131217-01

Rate, Pulse bpm --- Patient Simulator CAL – ETP – 17, ECRI
Biomedical
Pulse Oximeter Benchmark –
Saturation,
% --- SPO2 Simulator Procedure No. 451
Oxygen – 20081015-01

CAL – ETP – 18, ECRI

Biomedical
Radiant Warmer Temperature ˚C --- Thermometer Benchmark –
Procedure No. 419
– 20081015 – 01

CAL – ETP – 19, ECRI

Biomedical
Sphygmomanometer Pressure, Blood mmHg --- NIBP Simulator Benchmark –
Procedure No. 424
– 20081015 – 01

Volume, Air/O2 ml ---

CAL – ETP – 20, ECRI
Ventilator Calibration Analyzer
Biomedical
Rate, Respiration bpm --- Benchmark –

Biomedical Instrumentation & Technology Solutions Co. Ltd.

RLI Bldg. 3 Southpoint Subdivision Brgy. Banay-Banay Cabuyao, Laguna Philippines 4025
Phone: 049 535 6158 | Email: [email protected]
 Page 3 of 3

Time, I:E Ratio sec --- Procedure No. 458

– 20111122 – 01
Pressure, PEEP cmH2O ---

Fraction, Inspired
% --- Oxygen Analyzer
Oxygen

CAL – ETP – 21, ECRI

Biomedical
Flow Meter Flow l/min --- Digital Flowmeter Benchmark –
Procedure No. 400
– 20081015 – 01

Temperature, Ear ˚C --- Temperature Calibrator CAL – ETP – 22, ECRI

Biomedical
Infrared
Benchmark –
Thermometer Temperature,
˚C --- Thermometer Procedure No. 498
Forehead – 20081015 - 01

Note: Equipment that requires electrical safety testing must follow technical guide BITS- G3.002 for ground resistance and chassis leakage
current measurement procedure. If the unit is double insulated, grounding resistance need to be measured.

b. Preventive Maintenance – Periodic procedures to reduce the risk of device failure and to ensure
continuous operation of medical equipment.

Corrective Maintenance – Task performed to identify, isolate, rectify a fault, and restore and equipment to
an operational condition within the tolerances or limits established for in-service operations.

This is being issued upon request of the client.

Biomedical Instrumentation & Technology Solutions Co. Ltd.

RLI Bldg. 3 Southpoint Subdivision Brgy. Banay-Banay Cabuyao, Laguna Philippines 4025
Phone: 049 535 6158 | Email: [email protected]