Scribd
Upload
26 views

Large Refuse Containers 360 Litres

This document provides specifications for a large refuse container made by Weber. The container has a nominal volume of 340 liters and can hold 160 kg. It weighs 20 kg empty. Key features include a toothed rim for tipping, resistance to weathering, smooth-running casters, and compatibility with recycling at end of life. The container lid has two handles and plastic bolts to stay securely attached. The continuous handle on the back improves handling. The body has a smooth interior and exterior for emptying and cleaning, with consistent wall thickness and additional floor reinforcement. Ridges prevent stacking issues.

Uploaded by

Mostafa Mohamed Maher
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views

Large Refuse Containers 360 Litres

This document provides specifications for a large refuse container made by Weber. The container has a nominal volume of 340 liters and can hold 160 kg. It weighs 20 kg empty. Key features include a toothed rim for tipping, resistance to weathering, smooth-running casters, and compatibility with recycling at end of life. The container lid has two handles and plastic bolts to stay securely attached. The continuous handle on the back improves handling. The body has a smooth interior and exterior for emptying and cleaning, with consistent wall thickness and additional floor reinforcement. Ridges prevent stacking issues.

Uploaded by

Mostafa Mohamed Maher
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Large refuse containers 360 litres

Nominal volume: 340 lt.


Nominal working load: 160 kg
Dead weight: 20 kg

 WEBER large refuse containers are manufactured according to DIN 30700 / EN


840
 To be emptied by tipping over a toothed rim as a standard feature
 Manufactured from new basic material only
 Resistant to UV, cold, heat and chemicals,
 Smooth-running casters with solid rubber tyres
 Solid steel wheel axle, galvanised
 Embossing, hot stamping and screen printing possible
 Prepared to accommodate data carriers
 Available in all colours required
 The containers comply with the noise protection ordinance according to the EU
Directive and bear the guaranteed acoustic power (CE) mark.
 When service life ends the complete containers can be recycled.

Lids 2-wheeled containers

The flat lids are equipped with two recessed handles for opening.
They are attached to the containers by means of two plastic bolts on the continuous
stable handles in such a way that the former can be operated to swing freely.

Advantages for the user:


 Greater stability owing to thicker walls by comparison with the competitors
 Lid fastenings cannot be lost because bolt engages positively
 Compatible with various competitors' containers
 Improved water drainage due to rounded off lid shape and water draining edge

Handle of 2-wheeled containers


the continuous handle on the back is formed together with the body of the container in
a single injection moulding process and makes it easier to handle the container.

Body of 2-wheeled containers


the large refuse containers have a smooth outside surface, smooth interior for optimum
emptying and easy cleaning.

The walls of the bodies of the containers have the same thickness throughout,
although the floor of the container has approx. 1 mm additional reinforcement.

Special stacking ridges prevent them from getting stuck when stacked inside one
another.

The containers comply with the environmental protection / noise protection ordinance
according to EU Directive 2000 / 14 / EG and bear the guaranteed acoustic power (CE)
mark.

Abfallbehälter & Container Weber GmbH & Co. KG

You might also like