Scribd
Upload
399 views1 page

FCU PPM Checklist

This maintenance checklist contains 16 items to inspect various components of an air conditioning unit. It includes cleaning coils and drain pans, checking electrical connections, filter replacement if needed, checking for refrigerant leaks, lubricating motors, and ensuring control systems are working properly. The document also lists power readings and pressures that should be checked during maintenance. Proper disposal of waste and keeping work areas neat is required.

Uploaded by

shabiq93
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
399 views1 page

FCU PPM Checklist

This maintenance checklist contains 16 items to inspect various components of an air conditioning unit. It includes cleaning coils and drain pans, checking electrical connections, filter replacement if needed, checking for refrigerant leaks, lubricating motors, and ensuring control systems are working properly. The document also lists power readings and pressures that should be checked during maintenance. Proper disposal of waste and keeping work areas neat is required.

Uploaded by

shabiq93
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

STANDARD MAINTENANCE CHECKLIST

Manufacture Model No: Serial No: Capacity TR:


Note: Where defects are found it is the responsibility of the person carrying out the maintenance to report the defects before completing this maintenance plan
Sl.N0. DESCRIPTION JOB CARRIED OUT(✓/)
Inspect and clean the condensate drain pan to help avoid clogging of drainage by dirt, dust, etc. Inspect
1
drainage piping for proper condensate flow.

2 Check and clean the coil. Clean the coil with a low-pressure water jet or low-pressure air.

3 Clean and tighten all the wiring connections.

4 Inspect / clean air filter and or replace if necessary.

5 Check for Refrigerant leakage


6 Rotate the fan and motor shaft, 50 revolutions by hand. Check for free rotation

7 Inspect / clean air filter and or replace if necessary.


8 Check and flush drain line for any blockage

9 Clean grills

10 Check volts / amperes reading of the unit


11 Clean strainers, suction lines and spindles.
12 Check isolator / switch / indicating lights if properly working (All Electrical Equipment’s)
13 Lubricate Motor/Bearing
14 Check V belts & Alignments
15 Check HP/LP Cut Out
16 Check all Control Systems

Power Supply: V Suction Pressure: PSIG Thermostat Setting:


Compressor Current: AMPS Discharge Pressure: PSIG Room Temperature:
Blower Motor: AMPS Oil Pressure: CHWS Temperature:
Condenser Motor: AMPS CHW Pressure: CHWR Temperature:
4.Housekeeping Rules:
4.1 Garbage. & Spills of whatever kind must be cleaned up after work completion.
4.2 Passage way, emergency exits, and controls must be kept free of materials at all times,
4.3 Work areas to be maintained in a neat and orderly manner,
4.4 Ensure all wastes are to be properly and safely disposed om

Remarks:

Location:

Inspected Checked by Approved by


by:
Name: Name Name
Company: Company Company
Signature: Signature Signature
Date: Date Date
CR No.: 86796, P.O Box 214243, Doha, Qatar, Tel: 44551216, Mob: 30027007

E-mail: [email protected] | [email protected] | www.starwingsqatar .com

You might also like