0% found this document useful (0 votes)
127 views24 pagesAPI Manual For Petroleum Measurement Stanards
Uploaded by
EmmanuelCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
0% found this document useful (0 votes)
127 views24 pagesAPI Manual For Petroleum Measurement Stanards
Uploaded by
EmmanuelCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
/ 24
Petroleum Measurement
nl
Ifyou have questons or comments regarding API standards, please visit
oon apiong standards
‘MANUAL OF PETROLEUM MEASUREMENT STANDARDS
APL cunendy mainians a comprehensive Manval_of Petroleum
“Measurement Standards (MPM). This manual isan ongoing project, as
new chapters and revisions of ca chapters wl be vleased period cally,
Manual of Petroleum Measurement Standards (Complete Set)
The pice of the complete set is subject to change as new chapters and
sub-ehaptets are released; an order for one complete sel would aot
rlude the chaples released afer the release date of this catalog (but
before order cept) and the binders to house the set.
NOTE Chapt 1 sana, rapt 18 tana, nt Sraish anions ms be
(ces separa
Price: $9,064.00 | *Price subject to change (If purchased indiual
complete set would cost appraimately $10,300.00)
Chapter 1 [Historical]
Vocabulary
Provides tems and defintons used thoughout the APL Manual of
Petrol Measurement Standards (PMS). Pages: 70
2nd Eaton | July 1994 | Product Number: 01002 | Price: $108.00
‘current terms and dfnitions may be accessed through the Ch database:
ip: /ekaptraplorg
‘Chapter 1 * [Historical]
Vocabulary-Spanish
Spanish vanslation of Ch. 1,
‘2nd Eton | July 1994 | Product Number: HOLOSP | Price: $109.00
Chapter 2
Tank Calibration
Procedures necessary fr calibrating closed storage vessels larger than a
tum, and methods Yor computing the vlumes contained therein. The
folowing APL standards cover the subject of tank calibration ard ae
iludes inthe manval
(Chapter 2.28
Measurement and Calibration of Upright Clinical Tanks by the
Manual Tank Strapping Method
Procedures for calibrating upg elindcal tanks used primary forthe
storage ofpetoleum quis Ch. 2.28 adresses neaesearymensurement
procedures 2 determine total and. incremental tank volumes and
Drocedures for computing volumes. Both metre and customary unts are
reluged. The metic unks reflect what is avalasle In commercal
‘auipment. The standare ako proves guidelines ‘or recalibration and
cormputerzation of capac tables. Ch. 224 should be used in
Conjunction wih Cn, 2.28. These to standards combined supersede the
previous Std 2550, Pages: 88
1:8 Edion | February 1995 | Retfrmed: August 2017
Product Number: HOZ2AI | Pie: $125.00
Chapter 2.28
Calibration of Upright Cylindrical Tanks Using the Optical Reference
Line Method
Desorbes measurement and calelaton procedues for determining the
diameter of upright, welded (ap/but) ovincical tans, o” vertical
eylindreal tanks, wh 9 smoot oui sua and ether Noatng or fed
fools. The optical reference line method isan atermate to the manval
tank strapping method for dering tank clameter Ch. 2.28 should be
sed in conuretion with Ch, 2.28, Pages: 8
1s¢Eéon | March 1988 | Reafimed: January 2013
Produc Number: H30023 | Price: $83.00
Chapter 2.26/80 7507-8:1993
Calibration of Upright Cylindrical Tanks Using the Optical
‘Wiangulation Method
(ANSI/AP| MPMS ch. 2.2¢-2002)
Desorbes the eabraon of vericaleincical tanks by means of optical
‘angulation using theodoltes. The method is an akematve to other
methods such ae svapping (Ch. 2.28) and the opeaieternce-ine
rmethod (Ch. 2.28),
This edtion of Ch. 2.26 is the mecified naional adoption of $0 7507.
31983, Pages: 19
18 Eston | January 2002 | Reafemed: Api 2013
Product Number: HOZ2C1 | Pice: $83.00
Chapter 2.20/180 7507-4:1995
Callraton of Upright Cylindrical Tanks Using the Intel Electro:
Optical Distance Ranging Method
(ANSI/APL MPMS Ch. 2.20-2003)
Species a met forthe calibration of upg elindcal tanks naving
diameters grate than § m by means of internal measurements using an
stecto-opial distance-angng Instument, and for the subsequent
Earpilaton of tank epacty tables
‘Ws edton of Ch. 2.20 i the modfed national adoption of IS0 7507-
3995, Pages: 13
15% Eston | August 2003 | Rearmed: March 2018
Produc Number: HOZ2D1 | Pie: $83.00
Chapter 2.2E/IS0 12917-1:2002
Petroleum and Liquid Petroleum Products—Calibraton of Horizontal
OflindricalTanks—Part 1: Manual Methods
(includes Errata 1 dated November 2008)
(ANSI/API MPMS Ch. 2.2)
‘Species manval methods for the calraton of nominally hofzonal
oyiical tanks, nsialed ata fed locaton. It applicable to horzotl
tanks up to 4 m (13 A) in dameter and 30 m (100 A) in length. The
methods are applicable to insulated and nor-inslated tan, eter whan
‘hey are abovegound oF undergound. The methods are applicable to
Dressuseed tanks, and to both anueWe-dst-end and tend clinical
fanks as well as liptcal and. sphetcal nead tanks. Tis chapter Is
applicable to tanks inclined by upto 10% fom the hovzontal pred a
correction is applied forthe measured tk. For tanks over and above these
dimenscons and angle otk, approoriatecorectons for tk and appropiate
‘elume emputaton shou Be based onthe “Coat” equaton,
Ths editon of Ch. 2.26 is te rational adopton of 1$0 12017-12002.
Pages: 18
1s eon | Api 2004 | Reafimed: August 2014
Product Number: HX202E01 | Pie: $88.00
‘Thus varslated viens a poie rb cemainc fut cores and ape nt ofl eros by APL The wastes verons shal neta eplae nr spade te
Engl arguog veson, win oman te ofl sane
lide aye o orate oto decease
Perl notte respon fy crapances er ripetons of ace tase, anlar m3 ok
eke Enlon angie yup othe osumn
1 Tspublecensaneneneyin vs cataeg, ——-@ Te pubeston ae
een eileen ef ecdinn pope * Petroleum Measurement
Phone Orders: +1 800 854 7179 (Toll-f
US. and Canada)
Chapter 2.2F/10 12917-2:2002
Petroleum and Liquid Petroleum Produets—Callraton of Horizontal
‘ylindsical Tanks—Part 2: Intemal Electto-OpticalDistance-Ranging
Method
{ANSI/API MPIMS Ch, 2.2F)
‘Specifies & method fo the caltraton of horzontal indica tanks having
Glameters greater tran 2 m (6 R) by means of intemal measurements
using. an elecuo-opcal‘dstance-anging insvumert, and for the
subsequent compilation of tant-capaiy tables. This method is krown 2s
‘he interal electro-optical istance-anging (EODR) method.
This elton of Ch. 2.2F isthe naonal adoption of ISO 12917-2:2000.
Pages: 14
1st Eston | Api 2004 | Reatfimed: October 2017
Product Number: HN2O2FO1 | Price: $77.00
Chapter 2.26
Calibration of Upright Cylindrical Tanks Using the Total Station
Referonce Line Method
Deseibes measurement and ealulaion procedures for deteining the
Giameters of uptight lindical tanks by taking verical offset
measurements exteraly using electro-optical dtance ranging equipment
rather than comentional ORLM plummet/toley equipment. This standard
San aemate standard to Ch, 2.28, Ths standards used in conjunction
with Ch. 224, Calation of ineuated tanks is covered by Ch. 220.
‘Nbnormaly deformed tanks that are dented or have other vse sign of
‘damage are not covered by this standard, Pages: 14
{6 Eton | Jul 2014 | Product Number: H202601 | Price: $80.00
Std 2552
Measurement and Calibration of Spheres and Spheroids
Describes the procedures for calbraing spheres and soherids, which are
used as Iquc conianes. It ovtnes the procedures forthe measurement
‘and calovaion of spherical tanks. Pages 17
{18 Eon | Ostober 1965 | Reafimed: September 2012
2-Year Extension: December 2017
Product Number: H25520 | Price: $97.00
std 2554
Measurement and Calbration of Tank Cars
Descies the procedures for calibrating tank cars. outings procedures
for nonpressure-ype tank cars and pressure-ye tank cats, Pages: 41
{18 Edon | October 1965 | Reafmed: September 2012
2,Year Extension: December 2017
Product Number H2S540 | Price: $115.00
Std 2555
Liquid Catbration of Tanks
Deseites the procedure for calbvating tans, or portions of tans, larger
than a barrel or crum by introducing or winrawing measured quanttes
fq Pages: 14
{18 Edon | Septrnber 1966 | Reaffirmed: May 2014
Produc Number: H25550 | Price: $87.00,
RP 2556
CContecting Gauge Tables fr nctstation
Inerustaton is defined inthis document as any mate that adheres to
‘he inieralverical sidewall surfaces ofa tank when the tank is otherwise
empiy. Te ables gen inthis recommended pracice show the peient of
enor of measurement caused by vying thicinesses of ‘unfom
incrustaton i lank of sis ses, Pages 2
2d Eaton | August 1983 | Reafirmed: November 2013
Product Number H25560 | Price: $76.00,
Phone Orders: +1 303 397 7956 (Local and Interna
Chapter 2.7,
Calibration of Barge Tanks
Desoibes tree methods for determining the total incremental vlumes of
quis in barge tanks for coastal and rland wateway service that have
integral hull tanks, The dee methods areas flows,
Lui calraton,
Calraton by Hnear measurement
Calibration fom vessel ravings
This document and Ch, 2.8A supewade the previous Std 2553. A joint
Apljenergyrstute (2) sandara, also cames che El designation
Hythocafbon Management, M2 Section 5A, Pages: 25,
{EX Edon | March 1991 | Reafime: January 2014
Product Number: H30044 | Price: $59.00
Chapter 2.88,
Callbraton of Tanks on Ships and Oceangoing Barges
Thee methods for determining the total and incremental volumes. of
quis in tanks, oceangoing barges, and integrated tug barge uns that
hase itogal hull tans. The tee methods include liquid caleration,
¢albrabon by near measurement, and calbraton fom vessel canings
“hs document and Ch. 2.7 supersede the prevous Si 2853. Ajont AP
EnevgyInsitute (Esiandarl, also caries tre 61 designation
Hyttocarton Management, Hl2 Section 58, Pages: 22,
45% Ealon | March 1991 | Reaflme: March 2012
Product Number: H30048 | rics: $89.00
Chapter 2.88
Recommended Practice forthe Establishment of the Location ofthe
Reference Gauge Point and the Gauge Height of Tanks on Marine
Tank Vessels
Recommended practice, fr use in conjuneion with Ch. 2.7 and Ch. 2.84
Establishes reference gruge heignts curing calbraion of maine tank
vessels A reference gauge point Is necessary fr conertng ulage ‘0
innage, and when determining th volume ofthe quarts remaining on
Boar. A reference gauge point also used for wedge formulas. and
establishing wedge tables, Pages: 26
{st Edon | September 1985 | Reafimed: December 2014
Product Number: HO28B1 | Pace: $87.00
Chapter 3
Tank Gauging
‘Standarized procedures for gauging liquid hycrocarbons in various iypes
af tans, container, and cates,
Chapter 3.14,
‘Standard Practice for the Manual Gauging of Petroleum and
Petrofour Products
Deserves the fllovng
the procedures for manualy gauging te liquid love of peyoleum and
Bevckn peds nna favo feng! ans nd
arn tank vessels,
procedures for marwlly gauging the lel of ree water that maybe found
eth fe peooleum or petoleum prods,
methods used to very the length of gauge tapes under fel condons |
fd ie ihre fob wig none on Be hee oe
the influences that may ate she poston of gauging reference point
{err the datum plate ote reterence gauge pom
‘Thought tis standard te tr petoleum is used to dente petcleum,
poleom products or he Iqulds normaly associated wih fe petroleum
frau,
The method used to determine the volume of tank contents detemined fom
‘gauge readings is not covered in ths slandar. The determination of
Temperature, API gay, and suspended sediment and water of te tank
Contents are not wit the sope ofthis sandal, Pages: 32
‘3rd Eaton | August 2013 | Product Number: H301A03 | Price: $100.00
“© pubis td an Aang, ction eee
Pee Petroleum Measurement
Fax Orders: +1 303 397 2740
Chapter 3.18 *
‘Standard Practice for the Manual Gauging of Petroleum and
Petroleum Products—Spanish
Spanish vanslaton of Ch. 3.18.
‘3rd Eton | August 2013 | Product Number: HBO1A03S | Pee: $100.00
(Chapter 3.18
‘Standard Practice for Level Measurement of Li
‘Stationary Tanks by Automatic Tank Gauging
overs lvl measurement of qui yerocabons in stationary, abovepound,
‘aurosphere storage tanks using. automat tank gauges (ATs). This
publi discusses automate tank gaugng in genera, caltaton of ATS
for custody ansfr and inventory conc, and the requirements for data
colestor, ansission, and receing, The appendices ciscuss the
‘operation and instalation of the mos: eammonly used ATG equpmen and
ofthe less commonly use, eleonic ATG. Pages: 17
2nd Eaton | June 2001 | Reaffrmed: February 2016
Prout Number: H301B2 | Price: $97.00
Chapter 3.18 *
‘Standard Practice for Lovel Measurement of Liquid Hydrocarbons in
Stationary Tanks by Automatic Tank Gauging-Spanish
Spanish vanslaton of Cn. 3.18
2nd Eaton | June 2001 | Produet Number: H301825P | Pie: $97.00
Chapter 3.2
‘Standard Practice for Gauging Petroleum and Petroleum Products in
Tank Cars
Proves method for measuing liquids and liqueted gases in tank cas by
‘qua evel measurement, Measurement of 8h vapor space and Iquld
level are covered Gauging and temperature measurement equioment
sed in bath open and dosed measurement sjsiems ae descabed inthis
Sandard. Those’ proceaures "reduce “varaoily in the results. of
measurement and sampling operatons when comparing leading terminal
ata to unloading werinal data, Pages: 20,
48 Edton | August 1995 | Reatfimed: May 2013
Product Number: HO8021 | Price: $87.00,
Chapter 3.2*
‘Standard Practice for Gauging Petroleum and Petroleum Products in
Tank Cars-Spanish
‘Spanish vanlaton of Cn 32.
{st Eaton | August 1995 | Product Number: H03021S | Price: $87.00,
Chapter 3.3
‘Standard Practice for Level Measurement of Liquid Hydrocarbons in
‘Stationary Pressurized Storage Tanks by Automatic Tank Gauging
Prosi guidance on te instalation, cabraton, and vileaton of aortic
tank gauges used in custody Yarsor for measuing the level of Tqud
fyotocarbons hang @ Reid vapor pressure of 15 psi (103 KPa) or geaie,
ood in stationary, pessuand sage ark. This standart aso pods
{uidance on the requrements or dala colecton,vansisson, and eceing
Pages: 10
{1st Eton | June 1996 | Reatfimed: March 2017
Product Number: HO3031 | Price: $83.00
Chapter 3.3 *
‘Standard Practice for Level Measurement of Liquid Hydrocarbons in
Stationary Pressurized Storage Tanks by Automatic Tank Gauging
Spanish
Spanish variation of Ch. 3.3
{51 Edton | June 1996 | Product Number: HO30316 | Price: $83.00,
Hydrocarbons in
Online Orders: glob
Chapter 3.4
‘Standard Practice for Level Measurement of Liquid Hydrocarbons on
Marine Vessels by Automatic Tank Gauging
Provides guidance _on the selection, installation, calraton, and
wilaon of automat tank gauges for measuring the level of gud
tyrozarbons having a Reid vapor pressure less tan 15 psa (103 KP),
‘Vanspotes aboard marine vessels (ankars and barges). Ths standard
also provides. gudance on the requirements for data colecton,
‘vansmission, and recehing, This standard supersedes all applicable
solos of Sid 2545, Pages 10,
1s Edon | Api 1996 | Reatfimed: May 2016
Product Number: HO304t | Price: $83.00
Chapter:
‘Standard Practice fr Level Measurement of Liquid Hydrocarbons on
Marine Vessels by Automatic Tank Gauging—Spanish
Spanish translation of Ch 3.4
{st don | Api 1995 | Product Number: HO3041SP | Price: $83.00
Chapter 2.5,
‘Standard Practice for Level Measurement of Light Hydrocarbon
Liquids Onboard Marine Vessels by Automatic Tank Gauging
Coves the standard practice for level measurement of light hycrecarbon
quis onboard marin vessels by automate tank gauges. Tis publization
vers pessutred anc rtigerated light rycrocabon liquids. The gn
yroeatbon quis covered includ Iqueied peveleum gas (LP),
natural gas fou (NGL), and otver petrochemical Haus where the
sorage "and. Vansporation requements and the methods of
measurement are sma to that for LPG and NGL. gauging This standard
algo covers the requirements for dala collection, Varsmission, and
reosing Pages: 8
{salon | March 1997 | Reafimed: February 2013
Produc Number HO3051 | Pics: $83.00
Chapter 3.5 *
‘Standard Practice for Level Measurement of Light Hydrocarbon
Liquids Onboard Marine Vessels by Automatic Tank Gauging—
Spanish
‘Spanish vanslation of Ch. 3.5,
{st Edon | March 1997 | Prduct Number: HO3051S | Price: $83.00
Chapter 3.6
Measurement of Liquid Hyrocarbons by Hybrid Tank Measurement
Systems
(includes Errata 1 dated September 2005)
Covers selection, installation, commissioning, calibration, and veifeation
of hy tank measurement systems for the ‘measurement of lve, state
Imass, obseved and standard volume, and observed and reference
densi in tanks string pevleum and peoleum produce for custody
‘vanfer and/or inventory contol purposes, Pages: 26,
{st Ellon | Februaty 2003 | Rearmed: nuary 2017
Product Number: HO3061 | Pics: $96.00
‘Thus vaste viens ae povied rb cemainc fut cores ad arnt fly eros by JPL The waked verions shal net eplae ner spade te
Engle arguogversons, when omaa te ofl sane API sal rat te respensble ary dscepats or mpreatons of bese Carson, Tasehos a Po
nclie ay ascend or ota the date lace cece
Sanger rary aes tte document
“© Pipe ode ig, ntti or etn ep a Petroleum Measurement
Phone Orders: +1 800 854 7179 (Toll-fe
US. and Canada)
Chapter 4
Proving Systems
Serves asa guide forthe design, instalation, calibration, anc operation of
meter proving systems
Chapter 4.1
Introduction
General nvoducton to the subject of proxng. The requiements in Ch. 4
‘are based on customary pracices that evolved for eu ols and products
covered by Ch. 11.1 The prover and. meter uncertainties should be
‘appropiate fr the ‘measured Thids and should be ageeable to the
parle ioed, Pages
‘3rd Eaton | February 2005 | Rearmed: une 2024
Product Number HO4O13 | Price: $82.00,
Chapter 4.1 *
IntroductionSpanish
‘Spanish vanslaton of Cn. 4.1.
‘31d Eaton | February 2005 | Product Number: H40101S | Price: $82.00,
Chapter 4.2
Displacement rovers
(includes Addendum 1 dated February 2025)
‘utins the essential elements of proves that accumulate meter pulses as a
ispleng element witun the power vals beteen detector swthes.
proves cesign ane Insalton etal er Ue types of Asplaerent proves
‘hat are curenty in use. The poss discussed are designed fr proving
ieasuementdevies uncer dhrami operating conto wit singe-phase
Toul rocabons, Pages. 45
‘31d Eaton | September 2003 | Reafined: March 2011,
Product Number: HO4O2S | Price: $123.00
Chapter 4.4
Tank Provers
‘Specifies he characteristics of ank provers that arin general use and the
procedures for ther calbration, Ths standard doesnot appl to wei-ype,
Naporcondensing, dual tank water-displacement, or gasulsplacement
provers. Pages: 1
2nd Eton | May 1998 | Reafmed: May 2015
Produc Number HO4042 | Price: $83.00,
Chapter 4.5
Master Meter Provers
Covers the use of csplacernent, turbine, Corl, and ultrasonic meters as
maser meer. The requrements inthis standard ae intended fr singe
phase liquid hydrocarbons. Meter proving requirements for other fds
Should be appropriate fr the overall custody ansfer accuracy and should
be agreable to the partes invoked, This document doesnot cover master
meters 10 be Used for the calaion of provers. for infomation
Concerning master meter cabaton of provers, see Ch 4.8.3. Pages: 24
‘th Eaton | June 2016 | Product Number H4050s | Pie: $80.00
Chapter 4.6
Pulse Interpolation
{includes Errata 1 dated April 2007)
Descibes how the double-chvononetyy method of pulse interpalation,
relucing system operating requrements and equipment testing, is
applied to mater proving Pages: 8
2nd Exton | May 1999 | Reafmeed: October 2013
Product Number HO4O62 | Price: $65.00,
“Thece wnclated von ae proved rb cerrine of ut eaore: and ae noted APL The wanted veins shale ep
Perl notte report 2 cmpances er rinpetone of tece Canons ardor m3 hk
Engls-arguog weston, when omaa te ofl sane
Phone Orders: +1 303 397 7956 (Local and Interna
Chapter 4.7
Field Standard Test Measures
Detal the essential elemants of fl standard test measures by prosdng
descipion,constuctonrequremerts, as wel as inspection, handing and
taltyalon methods Bolior-neck sale es measures and por tae ae
at adessed in tis document, The scope of this stancard i ited tthe
Cercaton of “delved volumes” feet measures, Page: 19
‘3rd Eaton | Ap 2009 | Restfimed: une 2014
Product Number: H40703 | Pict: $86.00
Chapter 4.8
Operation of Proving Systems
Provides information for operating meler provers on single-phase liquid
bhytoearbons. Is intended for use as ateference manval for operating
proving sytem, The equrementsof th enapter are baced on customary
Practices for single-phase liquids. Ts standard is pnmarly wien for
yoroeatbons, but much of the informaton in ths chapter may be
applicable to other liquids. Specie requirements for tier iquids should
be ageeatle to the pales inoles, Page: 40
‘2nd Eton | Septeber2013 | Product Number: H04082 | Pie: $125,00
Chapter 4.9.1
Methods of Calibration for Displacement and Volumetie Tank
Provers, Part 1—Intoduction to the Determination ofthe Volume of
Displacement and Tank Provers
Proves ae precision devices, defined as volumebic standards, which are
sed to very the accuracy of liquid volumetric meters used for custody
‘vansfer measurement Both csplacement and lank provers are used to
prove a meter inorder io obtain its meter facto, which i then used to
Eovrct or meter eor cause by ferences between the metered vole
and he tre ylume, The base volume ofa displacement or tank pros,
determined by calbration, i an eseealal-requrement ne
determination of these meter factors. The accuracy ofa meter factor s
Timed by several consderatons:
eaulpment prormance,
observation enor,
rover volume calraton eros,
Cation ero. Pages: 28
1st son | Ostober 2005 | Reafirmed: Api 2015,
Product Number: H409011 | Price: $76.00
Chapter 4.9.2
Methods of Calibration for Displacement and Volumetie Tank
Provers, Part 2—Determination ofthe Volume of Displacement and
Tank Provers by the Waterdraw Method of Calibration
[prover volumes used to calate meters shall be determined by
callraton and not by thearetcal caleulaten Velumetic provers have an
tract reference velume, which has been determined bya recognized
method of ealbraton. Techniques for the determination ofthis erence
‘lume include the watertay, master mete, and gavimetic metiods of
falbaton. Ths standard desonbes ony the watedrew metros of
calbraton, whichis used to accurately determine the calrated volume of
oth ceplicement and tank provers, Pages: 92
{st Edtion | December 2005 | Reatfimed: May 2035
Product Number: H409021 | Price: $182.00
alte ayedcendao orate oth decrer ease cack he En langung ries fay pce he due
“© i pubani nd oan AP ica etain or aedaon oga Petroleum Measurement
Fax Orders: +1 303 397 2740
Chapter 4.9.3
Methods of Calloation for Displacement and Volumetic Tank
Provers, Part 3-Determination of the Volume of Displacement
Proves bythe Master Meter Method of Calibration
Covers the procedures required to determine the feld data necessary to
Calculate a base prover vlume (BP) of afield dsplacement prover by he
master meter method ‘or calibration. This standard applies to qué tat
‘or all practical purposes. ae. considered to be clean, single-phase
nomogeneous, and Newtonian at metering condons.
Detaled calculation procedures are not included in this stander see
h 12.2.5, Pages: 18,
1:8 Edton | Api 2010 | Reatfimed: March 2015
Product Number: H409031.| Price: $74,00
Chapter 4.9.4
Methods of Calfoation for Displacement and Volumetiic Tank
Proves, Part Determination of the Volume of Displacement and
Tank Proves bythe Gravimetric Method of Calbrtion
(includes Errata 1 dated August 2016)
Covers the specie procedures, equipment and calculations required to
Getermine te base prover volume ofboth ‘ank and aplacement provers
by the gavimetie method of calbraton. This sandaat presents both USC
and SF unts and ay be implemented in efter system of unts. The
Dresentaon of both unt is Yor the conwenience of the Usb: and ls not
hecescarly the exact conversions. The sjstom of unte to be Used ie
‘ypealy. determined by contac, reglatoyequrement, the
manufacture, othe user's calbraton brogarm. Troughout ins decument
sues of uateably are addressed by references to Natoral Insiut of
Standards and Technology (MST). Hower, other appropriate natonal
mettologysstlules can be referenced, There sno intent to cover sally
‘aspects of conducting the work described in this standard, and iis the
Gut f the user oe fair wit all applicable safe work paces. is
‘so the duly ofthe ser to comply with all existing federal, stale, or ocal
‘egulaions[eg. the Oceupatonal Safely and. Health Adminstration
(OSHA) tat gover the types of actives described inthis standard, and
{o be fair wih al such safety and healt eguatons. Pages 38
413 Eaon | October 2010 | Reafmed: December 2015,
Produc Number: H4080401 | Price: $83.00
Chapter §
Metering
Covers the djnamis measurement of Inu hytrocatbons, by means of
mers and accessory equipment.
Chapter 5.1
‘General Considerations for Measurement by Meters
{includes Errata 1 dated June 2008 and Errata 2 dated June 2011)
Intended to be a guide for the proper specication, insalation, and
operation of meter runs designed. to dynamically measure. gud
hydrocarbons so that acceptable accuracy, sevice ie, sale elably,
‘and qualtycontel can be achieved. Ch. also includes information that
wll asist in oublestostng and improving the performance of meters.
Pages: 8
‘Ah Eton | September 2005 | Reafimed: Jy 2016
Product Number HOSO14 | Price: $84.00,
Chapter 5.1 *
General Considerations for Measurement by Meters—Spanish
Sparish vanslaton of Cr. $1.
‘4h Eton | September 2005 [Product Number: HOSOLASP | Price: $94.00
“Thec wncltd von ae proved fb ccranine of ut care: and anol ered y AP The wanted versione shale ep
Penal notte report sy capone er rietone of these Canons, anlar m3 ok
Engl argiog veson, win omaa te ofl sane
Online Ord
lobal.ihs.com
Chapter 5.2
Measurement of Liquid Hydrocarbons by Displacement Metors
Ch. $2, togethor wih the general considerations for measurement by
meters found in Ch. 5.1, deserbes methods for obtaning accurate
quantity, measurement with displacement meters in Hau hyctocarbon
soroe.I'coers the unique performance charactersis of placement
meters nique hyerecarbon service, Kt does nat" apply to. the
measurement of two-phase fits, Pages: 3
‘3rd Eaton | October 2005 | Rested: ly 2015
Product Number H08023 | Price: $87.00
Chapter 5.2 *
Measurement of Liquid Hytrocarbons by Displacement Meters
‘Spanish
‘Spanish wanslation of Ch. 5.2.
‘3rd Eton | October 2005 | Produt Number: H50203S? | Price: $87.00
Chapter 5.3
Measurement of Liquid Hydrocarbons by Turbine Meters
(includes Addendum 1 dated July 2009)
Defines. the applicaton itera for tubing meters and discusses
appropiate consieratons vegaring the lquds to be measure
Discusses. the istalaton of a tube metering system and. the
performance, operaton, and maintenance of tune meters in fiuid
fyorocarbon’ service. includes “Selecing a Meter and Accessory
Ezulpment” and information on the recommended locaton for prover
éarinections, Pages! 11
Sth Eon | September 2005 | Rearmed: August 2014
Produc Number: HOS035 | Price: $106.00
Chapter 5.3 *
Measurement of Liquid Hydrocarbons by Turbine Meters—Spanish
Spanish translation of Ch 5.3, nclucng Addendum 1 dated Jy 2008,
Sth Eton | September 2005 [ Product Number H50305SP | Poe: $106.00
Chapter 5.4
Accessory Equipment for Liquid Meters
(includes Errata 1 dated May 2015)
Deserves the characterises of accessory equipment used with
displacement and turbine meters in iqudyatocarbon serie. Includes
|uidanceon the use of electron Now computers. Pages: 8
‘4th Eaton | September 2005 | Reafed: August 2015
Product Number HO5044 | Price: $94.00
Chapter 5.4 *
‘Accessory Equipment for Liquid Meters~Spanish
‘Spanish vanslation of Ch. 5.4
‘4th Eaton | September 2005 Product Number: HO5044SP [Pice: $94.00
Chapter 5.5
Fidelty and Secu of Flow Measurement Pused-Data Transmission
‘Systems.
‘Serves aa guide forthe selection, operation, and maintenance of vanous
‘ypes of pulsed-iata, cabled transmission systems for fc meteing
stems to provide the desited lvl of faely ane securty of vanced
‘tow pulse data. Ths publication does not endorse of ackocate the
preferental use of ary specfe type of equipment or systems, nor isi
Intended to resi ft development of such equipment Pages: 8
2nd Eaton | July 2008 | Reames: August 2015
Product Number HS0502 | Price: $70.00
ale ay edna o erate decer ease cack te Engaging ries fe ary pce he dou
“© Pipe ode ig, natin or etn oe = Petroleum Measurement
Phone Orders: +1 800 854 7179 (Toll-f
US. and Canada)
Chapter 5.5 *
Fidelty and Secuty of Flow Measurement Pulsed-Data Transmission
‘Systems—Spanish
Spanish vansaton of Cn. 5.5,
2nd Elton | July 2008 | Product Number: H50502SP | Price: $70.00
Chapter 5.6
Measurement of Liquid Hydrocarbons by Coriolis Meters
{ANSI/API MPMS Ch. 5.6-2002)
Deserbes methods for achieving custody wanefer levels of accuracy when
8 Cofels moter is used to measure hgud hydrocarbons, Topics covred
elude: apoliable API standards ured in the operation of Cora meters
proving and verfeaton using both mass- and wolume-based methods;
{and installation, operator, and maintenance. Goth mass and volume:
Based calulation procedures for proving and quaniy determination are
reluded in Append. Pages: 48
18 Edon | October 2002 | Reafrmod: November 2013
Product Number: HOSO6S | Price: $138.00
Chapter 5.6 *
Measurement of Liquid Hydrocarbons by Coriolis MetersSpanish
Sparsh vansaton of Cr. 5.6,
18 Edton | October 2002 | Product Number: HOSOBIS | Pie: $139.00,
Chapter 5.8
Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters
{includes Errata 1 dated February 2014)
{(ANSI/API MPS Ch.5.8-2011)
Delnes the apotcaten citera for ulvasonc flowmeter (UFMS) and
Asdrestes the appropiate considerations regarding the havi to be
measured. Tis document addresses the isialalon, operalon, and
maintenance of UFMS in auld hyocarbon. service. The fel of
Applicaton of ths standards the” dynamic measurement of liquid
hydrocarbons. While tis document is specticaly wen for custody
Uanler measurement. olter aceplable appleatons. maj Include
‘loealon measurement, eheck meter mescurement, and lak detection
measurement. This document only pertains to spool type, mut-path
dtasonic flow meters win permanent affed acousie’ Vansducer
‘assembles, Pager! 23,
2nd Eton | November 2011 | Reaffemod: May 2017
Product Number: HOSO82 | Pice: $86.00
Chapter 5.8 *
Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters—
Spanish
Spanish vanslaton of. 58
‘2nd Eton | Noverber 2011 | Product Number HOS0802SP| Pe: $86.00
Chapter 6
Metering Assemblies
Discussion of the desig, instalation, andl operation of meteing systems
for coping wth special stations in hydrocarbon measurement,
Chapter 6.1
Lease Automatic Custody Transfer (LACT) Systems
Prepared as a gue forthe design, instalation, carton, and operation
of 2 lease automate custody tansler (LACT system. It apples to
attended and automatic measurement by metr of hyocarbon luis
produced in the fl and vanstred to a pipeline in eter a scheduled or
nonscheduled operation, Pages: 6
‘2nd Editon | May 1981 | Rearmed: December 2017
Produc Number: H30121 | Price: $60.00,
‘Thee wnat von ae proved fhe cemanine of ut caores and anol ede y AP The wanted esos shale ep
Penal notte report sy capone er riretone of tece Canons, ardor m3 hk
Engl argiog verson, wn omaa te ofl sane
Phone Orders: +1 303 397 7956 (Local and Interna
Chapter 6.2
Loading Rack Metering Systems
Serves asa gid nthe election, instalation, and operation of loading ack
meerng sets for peteleum produce, indudng iqueted petolevm gas
‘Ts standard does not endorse or accat he prefreial se of ay spec
‘ype of metering system or mete, Pages: 30
‘3rd Eston | February 2004 | Rearmed: uy 2016.
Product Number H60203 | Price: $79.00
Chapter 6.2 *
Loading Rack Metering Systems—Spanish
‘Spanish wansation of Ch, 6.2
‘3rd Eaton | February 2004 | Product Number: H60203S | Price: $79.00,
Chapter 6.5
Metering Systems for Loading and Unloading Matine Bulk Carers
Deals with the operation and specal arangements of mets, pavers
manfolding, insiumertalon, and. accessory equipment used. for
Ieasutement ding loading’ and unloading. of mane uk carte
Pages: 6
2nd Elton | May 1991 | Rearmed: May 2012
Product Number: H30128 | Price: $65.00
Chapter 6.6
Pipeline Motoring Systems
Provides guidelines for slecton of te type and sizeof medes to be used
to measute ppeine ol movements, a: well asthe rlatve advantages and
disacianiages of the metrods of proving meters by tank pow,
Eanventional pipe prover, small volume prover, and master meter. also
includes discussion on’ obtaining the’ best operating results fom a
pipeine-metrsavon, Pages: 9
‘2nd Elton | May 1994 | Reatfmed: December 2017
Product Number: H30126 | Price: $65.00
Chapter 6.7
Metering Viscous Hydrocarbons
‘Serves as a guide othe design inetallaton, operation, and pring of meters
and auallay equoment sed in metering viscous Fyocafbons. dines
cous iyecabors and descbes the dflties that arse when viscous
Iydiecatons ae rased thigh temperature The eects of uch temperatures
on mete, autany equipment, and ftngs are dcusced, and aves and
arrings to overcome or mitigate cles are ined, Pages: 6
‘2nd Editon | May 1994 | Reafired: May 2012
2Year Extension: December 2017
Product Number H30127 | Price: $65.00
Chapter 7
Temperature Determination
(Includes Addendum 1 dated October 2011 and Addendum 2 dated
bugust 2017)
Desorbes metiods and practices that may be used to obtain accurate
measurements of temperature of pevoleum and pevoleum products In
Dipeies, storage tanks, gathering tank, ship, barges, tank cas, pipe
provers fank provers, and test measues under both stale and amie
Eondton using elecvonc temgerature measuring devees or meters
dass thermometers.
Descites the methods, equipment, and pecedues fr cetemrng the
temperate of pevleur ang petcleum products under bo sate and
Synamic condos. Ths “chapler discusses temperate measure
reguremeis in general for eusiody Yast neta eo, and ane
Measurements. Te acul method ard equipment selected for temperate
detenaton ale tthe ageerent of te partes moked, Pages: 38
{skit | Je 2001 | Reatimed: February 2012
2Year Exersion March 2017 | Product Number: HO700% | Pie: $197.00
ale ay eden o erate th decer ease cack te Engin langung ries fe ary pce he due
“© putnam Aang, etn, eae
Pee Petroleum Measurement
Fax Orders: +1 303 397 2740
Chapter 7.1 =
Temperature Determination—Liquid-n-Glass Thermometers
Desefoes how to cone use vakous types ofgud--lassthemometos
to accurately determine the temperatures of hyrocaron tquds. Other
mets, equipment. and prececues for temperature determination are
esares inthe ober substations of Ch, 7.
This chapter describes the methods, equioment, and procedues for
ranualy determining te temperature of gud petroleum and paoleun
products wity Fouthin-las thermometers, This chapter discusses
temperature measurement requremens in general fr cusiody vanstr
aveniory cont, and. maine measuemens. The actual method. and
‘equipment selected fe temperature determination are le othe ageement
othe parts ved, Pages: 37
2nd Eaton | August 2017 | Product Number: H70102 | Pie: $110.00
Chapter 7.3
Temperature Determination—Fixed Automatic Tank Temperature
‘Systems
Descibes the methods, equipment, and procedures for determining the
temperature of petoleui and petoieum product under sate conditions
by te use ofan aliomatc method, Automate temperature measurement
S dscussed for eustoy Yanster and imentory coml for both onshore
‘and marine measurement appliaton.
Temperatuies of hydrocarbon liquids under stale corltons can be
Getermined by measuing the temperature of the iquc at specie
locations, Examples of were static temperature determinations egured
luce sirage tanks, ship, and barges
‘The apoicaton of hs standard is estcted to automate methods forthe
elerminaton of temperatue using fhed automatic tank thermometer
(AT) systems fr hydrocaons Raung @ Reid vapor pressure ato below
101.325 fa (14.696 psi},
‘though not include inthe scope, eaurements inthis standard can be
used for other ids and other apolicatons including pevoleum tus
having Reid vapor pressues in exess of 101.328 ¥Pa (14.696 psa)
‘anks. with inet gas sjsiems and cyogeic’Equds. However, Such
applications can. requve ferent peormance and instalation
‘Spectieatons, Pages: 27
2nd Eaton | October 2011 | Reafimed: December 2016
Product Number: H70302 | Price: $83.00,
Chapter 7.3 *
Temperature Determination-Fixed Automatic Tank Temperature
‘Systems—Spanish
Spanish vanslaton of C. 7:3,
2nd Eton | October 2011 | Product Number: H70302SP | Price: $83.00,
Chapter 7.5/1S0 8310:2012
Temperature Dotermination—Automatic Tank Temperature
Measurement Onboard Marine Vessels Carrying Rettigerated
Hydrocarbon and Chemical Gas Fluids
{(ANSI/API MPMS Ch. 7.5)
Specifies the essential requirements and veteaton prosedues for
automatic lank thermometers (AMTs) consisting of platinum resistance
‘ermometers (PRT) and an inciadng device Used for custody vanser
measurement of bguefed natural gas, lqueied pevoleu, and enemical
g2ses on board ships. Temperature detectors other than PRT ae
Considered acceptable for usb inte eusody tansy cence of liquefied
{gases if they meet the performance requirements of ths document and
Sr approved by national regulon, Pages: 12
{st Etton | Septembee 2014 | Product Number: HH70501 Pie: $95.00
Engl argiog verson, when oman te ofl sane
Online Ord
lobal.ihs.com
Chapter 8
‘Sampling
Covers standardized procedures for sampling petoleum and petroleum
products,
Chapter 8.1,
‘Standard Practice for Manual Sampling of Petroleum and Petroleum
Products
(astm D4087)
Covers procedures and equipment for manualy obtaining samples of iquid
pevoleam and petoeurr products, cude ls, ad ilemeiate producs
‘rom the sample point ino the primary conainer, Procedures are also
included for the sampling of fee water and her heavy components
associated with petoleum and peucleum products. This practe_ also
Batsses the sampling of sem-igud or so-state pevoleum products
“Tis practice proides.adcivonal specie information about. sample
onlamnerseleclon, preparalon, and sample handling Ti practice does
rat cover sampling of electcal insulating ol and hydraulic fuids, The
procedues desorbed inthis pratce may aso be applicable in sampling
Irest-non-conasve. Iqud indusbial chemicals provded that all sey
precawions specie to theee chemeale are flowed (ao, refer to ASTM
Practice £300), The prosedues described in this pracice ae also
applicable to sampinglauelieé petroleum gases and chemicals. Pages: 48
‘4h Eaton | October 2013 | Product Number H80108 | Pcs: $120.00
Chapter 8.1 ¢m
‘Standard Practice for Manual Sampling of Pevoleum and Petroleum
Produets—Spanish
‘Spanish vansaion ofr. 8.1,
4th Eton | October 2013 | Product Number: HEOTO4S | Price: $120.00
Chapter 8.2
‘Standard Practice for Automatic Sampling of Petroleum and
Petroleum Products
(astw 04177)
Deseibes geal procedures and equipment fr automaticaly obtaining
samples of quid petoleum and pevoleum products, cude oi, and
intermediate products from the sample point nto the primary contain.
This practice also provides accitonal specie information about sample
centainerseleion, preparaton, and sample nanlng. If sampling is for
‘he precse determination of volt, use Ch. 8.4 (ASTM Practice 05842)
in eonuncion with this practe. For sample maing and handling, reterto
Ch. 83 (ASIM Practice DS854). This practice does not cover sampling of
electrical insulating ols and hyrauli fis. Pages: 45,
‘4th Eaton | November 2016 | Product Number: 80206 | Price: $71.00,
Chapter 8.3,
‘Standard Practice for Mixing and Handling of Liquid Samples of
Petroleum and Petroleum Products
(includes Errata 1 dated March 1986)
(asm 05854)
Covers the handling, ming, and condoning procedures requied to
ensue that a representative sample ofthe gull petoleum or peteleum
product is delved fom the primary sample contaney/-ecover info the
Enabcal tet apparatus or ito intermaciate containers. For sampling
procedures, refer to Ch 8.1 and Ch, 8.2, Refer to Ch, 8. forthe mang
Bid handing of gn fl or oat measurement. Pages: 27
1st Elon | Oetober 1985 | Reafied: March 2015,
Product Number: HOB034 | Price: $89.00
alte ay eden o orate to decrer ease cack te Engaging ries fe ary pce he due
“© ipod ig, nttinor e oe = Petroleum Measurement
Phone Orders: +1 800 854 7179 (Toll-f
US. and Canada)
Chapter 8.3 *
‘Standard Practice for Mixing and Handling of Liquid Samples of
Petroleum and Petroleum Products—Spanish
‘Spanish vanelaton of Ch. 8.3.
15 Edton | October 1985 | Product Number: HBOSO1SP | Price: $88.00
Chapter 8.4 =
‘Standard Practice for Sampling and Handling of Fuels for Volatility
Measurement
(astm D842)
Covers procedures and equipment for obtaining, mang, and hancling
represertatie samples of volatile fuels for te purpose of tesing for
compliance wih the sandars st forth for voll lated measurements
applicable t0 light fue. The applicable dry vapor pressure equvalent
range of hs pratic is 13 19 120 KPa (2 to 16 psa
This practice ie applcale to the sampling, ming, and handling of
‘formulated fuels inclucing those containing oxygentes This practie is
nat appleable to ude ol For the sampling of cade ol refer t Ch 8,
h, 8.2, and Ch, 8.5, Pages: 18
‘4th Eton | December 2017 | Product Number: H80404 | Price: $46.00
Chapter 8.5
‘Standard Practice for Manual Piston Oyinder Sampling for Volatile
Crude Oils, Condensates, and Liquid Petroleum Products
(asTM 08009)
Includes the egulpment and procedures for obtaining a representatue
sample of "ive" or high vapor pressure crude als, condensates, and/or
Fula petroleum producs fom lw pressure sample poi, where theres
sufficient sample oint pressure to use a floatng piston cylinder (FPC)
as desrbed in ASTM D300, Pages: 20,
{st Edton | December 2015 | Product Number: H80501 | Pie: $50.00
Chapter 8.5 "=
‘Standard Practice for Manual Piston Gyinder Sampling for Volatile
(Crude Oils, Condensates, and Liquid Petroleum Products~Spanish
Spanish vansation oh. 85.
{stEdion | Docember2015 | Product Number: H8OSOIS | rice: $50.00
Chapter 9
Density Determination
Desist standard methods and appara used to determine te spect
gay of ude ll and petroleum products normaly Randle squids.
Chapter 9.1
‘Standard Test Method for Dens, Relative Density (Specific Gravity),
‘or API Gravity of Crude Petroleum and Liquid Petroleum Products by
Hydrometer Method
(asta 01298)
Covers the laboratory determination, using a. glass hydromete in
Conjunction with a saes of cafations, of the density rlatve dens, or
AAP gaviy of crude petvleum, pevoleum products, or mixtures. of
petoleum and nonpetleum products nonally hanced as lauids and
having Red vapor pressure of 101.328 KPa (14,696 ps) oss Values
‘are determined at existing temperatures anc corected to 15 "Cor 60 °F
by means ofa series of calculations and itemationalstanard tables,
‘The inal hycrometer readings obtained are unconested fydrometer
readings and not density measurements. Readings are reasured on a
hydromete a ether the reference temperature or al another convenient
temperature, anc reacings are corecied for the menscus eet, the
shermal glass expansion effect, alemate caltraton temperate eects,
and to the eleence temperature by means of volume eorecton facto
“alues obtained at ote than the reference temperature being hyometer
reagings and not dens measurements,
Phone Orders: +1 303 397 7956 (Local and International)
Readings determined as densiy, relate densi, or APL gavty can be
onvree to equvalet values im tne other ants or ateate refeence
temperatures by means of frterconesion Procedures (Ch 11.5) or weume
correction tacos (C, 11.1}, orbot, or tables, as appeable Pages 8
‘3rd Eaton | Decerber 2012 | Reafimed: May 2017
Product Number: 08013 | Pe: $41.00,
Chapter 9.2
‘Standard Test Method for Density or Relative Density of Light
Hydrocarbons by Pressure Hydrometer
(astu Dies7)
Covers the determination of the densiy or elaine densiy of tight
bydrocarbons including Hauefed petleum gases (LPG) having Reid
‘Vapor pressures exceeding 101-325 kPa (14.686 os)
‘The prescribed apparatus should not be use for matals having vapor
pressures niger than 1.4 MPa (200 ps) at the test temperature. This
Dressure mit is cette by the ype of eauipment. Higher pressures can
apply to other equipment designs.
‘The inal pressure tydrometer readings obtained are unconected
hyowometer feaings an not density measurements. Reauings are
Measured on a fytrometer at either the reference Temperature or at
nother convenient temperature, and readings are coreced for the
meniseus effec, the thermal glass expansion effec, alfernate clbvation
Temperature effects, and to the ‘eleence temperature by means of
Calculations and volume conection factors (Ch. 111) or Ch 12.2.8 (GPR
7P-27), as applicable
Values determines as densiy or elatie density can be comerted to
equvalent values inthe cther uns or atematie reference temeratues
ty means of Itercometsion Procedures (Ch. 11.5), of vlume conection
factors (Ch. 11.) or Ch. 11.24 (GPR P27), as applicable, Pages: 6
‘31d Eaton | December 2012 | Reafirmed: May 2017
Product Number: H08023 | Pict: $41.00
Chapter 9.3,
‘Standard Test Method for Deny, Relative Densiy, and API Gravity of
GrudeFetleur and Laud Petleun Product by Tennotycometr
(asrit b6s22)
Cer the determination, using 2 glass thermofyérometr in conunaton wih
2 ses of cautions, ofthe dest, reatve censor APL gavty of crue
Datceum, petoleun produc, or mus of petoleum and nonpevcteum
roduc neal ancl as lgids and hauing a Reid vapor pressures of
40.326 Wea (14.696 ps) ors.
Vales ae determined at exisbng temperatures and conested t 15 °C or
60 *Fy means ofa sees of calculations and mxeratonal standard tables
‘The inal themycometereacings cblaned are uncorected homeer
readings and not densly measwemens, Readings ee measured on @
‘hermahyromete at exer dhe eeence temperature oat aot: convenient
Temperalue, and veacings are conecled for he meniscus elec. the thermal
sass expansion eect, aerate cabraton temperate eects, and to the
tefeencetemperive by means of caluatons anc volume conection actors
carey
Readings determines as densi relatve dens, or APL gavty can be
anorbs to eauvaert ales In te ater Unis or abemat retsence
temperaues by means of Ineronvetson Procedures (Ch 11.5) o velume
correct facts (Ch. £1.) or bot, ortabes, as apical. Pages: 10
‘rd Eaton | December 2012 | Reafrmed: May 2017
Product Number: HO8033 | Pca: $41.00
“© bani nd oan Aang et Petroleum Measurement
Fax Orders: +1 303 397 2740
Chapter 10
Sediment and Water
Describes methods for determining the amount of sediment and wate
ether togetrer or separately in petoleum products, Laboratory and Feld
mets ar cover,
Chapter 10.1,
‘Standard Test Method for Sediment in Crude Ols and Fuel Os by
the Extraction Method
{aNsi/ASIM 473)
Cos the determination of eden in crude os and tel ok by extraction
‘wth tone The reason apis to a range of sediment levels from O01 to
(0.40 5 mass, although ger levels may be ctemned Pages:
‘3rd Eaton | November 2007 | Rearmed: May 2017
Product Number: HI0013 | Price: $38.00,
Chapter 10.2
‘Standard Test Method of Water in Crude Ol by Distilation
(astm D4008)
Covers the determination of waterin cud oly citation, Page: 11
49 Elion | December 2016 | Product Number: #100204 | Pie: $50.00
(Chapter 10.3,
‘Standard Test Method for Water and Sediment in Crude Oil by the
Centituge Method (Laboratory Procedure)
(asta D007)
Deseibes the laboratory determination of water and sediment in crude
ols by means of the centifuge procedure, This centifuge method for
Setermining Water and secimert n crude ois isnot entre etstacory.
‘he amount of water detecced is almost always lover than the actual wate:
canton When a nignlyacorae vale Is requeed, the revised procedures
for water by ditlaton, Ch, 10.2, and sediment by exacton, Ch. 10.1,
stallbe used Page: 13
4th Eaton | August 2013 | Reaffrmed: May 2016
Product Number H100304 | Price: $50.00
Chapter 10.4
Determination of Water and/or Sediment in Crude Oil by the
CCentiftuge Method (Field Procedure)
{includes Errata 1 dated March 2015)
Deseibes te feld centtuge method for determining both water and
sediment or sediment ony in crude ol. This method may not alvays
produce the most accra resus, but is considered the most pracal
method fo ld deermnaton of water and secment This method may
also be used for fel deerminaton of seciment Pages: 23
‘th Eaton | October 2013 | Product Number: #100404 | Pie: $85.00
Chapter 10.5,
‘Standard Test Method for Water in Petroleum Products and
Bituminous Materials by Distilation
{ASTM 095)
Covers the determination of water inthe range from 0 to 25 % volume in
pevoleum products tar, and other bituminous matevals by the
‘stiaion method. Volatile water-soluble material, present may Be
measured a yaier The specie. products considered ding. the
evelopment of his test metrod were aspha, rumen, ta, fel of,
LMbneaing ol, lbsicaung all addties, and. geases. For btuminous
femulsions refer to ASIM Test Method 244, for crude ols, reer ©
ch 102, Pages: 6
‘th Eaton | September 2013 Product Number: H100505 | Pre: $41.00,
“Thece wncltd von ae proved fb cern of ut eames and anol ered by AP The wanted versione shale ep
Penal notte report sy cparces er rinretons of these Canons, anlar m3 hk
Engl arguog verso, wn omaa te ofl sane
Online Ord
lobal.ihs.com
Chapter 10.6
‘Standard Test Method for Water and Sediment in Fuel Oils by the
Centrifuge Method (Laboratory Procedure)
(astm 01736)
Deserves the laboratory determination of water and sediment in fel os
inte range tom 0 to 30% vlume by means ofthe centre procedure.
Note that with some ypesof el ols Such as residual fel as a cistilte
fuel ols conaning residual components, iis det to obtain water or
seament contents with this test-method. When this stuaton i
encountered, Ch. 10.5 oF Ch 10.1 maybe used. Pages: 7
Sth Eton | August 2013 | Rearmed: May 2016
Product Number H100605 | Pre: $41.00
Chapter 10.7
‘Standard Test Method fr Water in Crude Oils by Potentometic Kar!
Fischer Tation
(@NSI/ASTM D4377)
Desorbes the procedure forte deteninaton of wate in cude ol by
Kal Fischer tivation (octentometic). Tis test method covers the
