0% found this document useful (0 votes)
21 views

Leaf 2

The document describes the boot log of a Cisco switch. It detects devices at startup and checks the firmware. Filesystem errors are found on multiple partitions. An NMI error is also logged but the system tries to continue booting.

Uploaded by

Mannu Gupta
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
21 views

Leaf 2

The document describes the boot log of a Cisco switch. It detects devices at startup and checks the firmware. Filesystem errors are found on multiple partitions. An NMI error is also logged but the system tries to continue booting.

Uploaded by

Mannu Gupta
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 5

▒▒

CISCO SWITCH Ver7.64


Device detected on 0:6:0 after 0 msecs
Device detected on 0:1:1 after 0 msecs
Device detected on 0:1:0 after 0 msecs
MCFrequency 1333Mhz
Relocated to memory
Time: 1/28/2024 15:37:36
Detected CISCO IOFPGA
Donner Present
MIFPGA Present
Code Signing Results: 0x0
Using Upgrade FPGA
Checking and setting PSU fan directions
Booting from Primary Bios
FPGA Revison : 0x8
FPGA ID : 0x1345727
FPGA Date : 0x20160526
Power Debug Register: 0x0
Reset Cause Register: 0x80000000
Boot Ctrl Register : 0xe0ff
FPGA Update Status : 0x20
Detected CISCO MIFPGA
Version 2.16.1240. Copyright (C) 2013 American Megatrends, Inc.
Board type 2
IOFPGA @ 0xc8000000
SLOT_ID @ 0xf
Filesystem type is ext2fs, partition type 0x83
ACI chassis
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
Filesystem type is ext2fs, partition type 0x83

Booting bootflash:aci-n9000-dk9.13.2.6i.bin...
Booting bootflash:aci-n9000-dk9.13.2.6i.bin
Trying diskboot
Filesystem type is ext2fs, partition type 0x83
Image valid

Image Signature verification was Successful.

Boot Time: 1/28/2024 15:38:2


[ 0.000000] Reserving ebda at 0x9f000 Len 0x61000
▒▒
W^o▒{switching root to tmpfs
INIT: version 2.88 booting
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
Found card_index=21025
*** Running INXOS PE IFC image ***
*** Running INXOS PE IFC image ***
Skip /var/sysmgr setup to S26 script HW: 1, IFC: 1
*** Running INXOS PE IFC image ***
Starting udev
e2fsck 1.42.1 (17-Feb-2012)
/dev/hd-cfg0: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-cfg0
/dev/hd-cfg0: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-cfg1: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-cfg1

/dev/hd-cfg1: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-pss: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-pss

/dev/hd-pss: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-bootflash: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-bootflash

/dev/hd-bootflash: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-logflash: recovering journal
[ 188.528691] Uhhuh. NMI received for unknown reason 31 on CPU 0.
[ 188.599406] Do you have a strange power saving mode enabled?
[ 188.667074] Dazed and confused, but trying to continue
/sbin/e2fsck: unable to set superblock flags on /dev/hd-logflash

/dev/hd-logflash: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-recovery: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-recovery

/dev/hd-recovery: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-ifc-log: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-ifc-log

/dev/hd-ifc-log: ********** WARNING: Filesystem still has errors **********

Early mount of filesystems


mount: wrong fs type, bad option, bad superblock on /dev/sda4,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

@@@ Checking config for FIPS



CISCO SWITCH Ver7.64
Device detected on 0:6:0 after 0 msecs
Device detected on 0:1:1 after 0 msecs
Device detected on 0:1:0 after 0 msecs
MCFrequency 1333Mhz
Relocated to memory
Time: 1/28/2024 15:44:33
Detected CISCO IOFPGA
Donner Present
MIFPGA Present
Code Signing Results: 0x0
Using Upgrade FPGA
Checking and setting PSU fan directions
Booting from Primary Bios
FPGA Revison : 0x8
FPGA ID : 0x1345727
FPGA Date : 0x20160526
Power Debug Register: 0x0
Reset Cause Register: 0x80000004
Boot Ctrl Register : 0xe0ff
FPGA Update Status : 0x20
Detected CISCO MIFPGA
Version 2.16.1240. Copyright (C) 2013 American Megatrends, Inc.
Board type 2
IOFPGA @ 0xc8000000
SLOT_ID @ 0xf
Filesystem type is ext2fs, partition type 0x83
ACI chassis
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
Filesystem type is ext2fs, partition type 0x83

Booting bootflash:aci-n9000-dk9.13.2.6i.bin...
Booting bootflash:aci-n9000-dk9.13.2.6i.bin
Trying diskboot
Filesystem type is ext2fs, partition type 0x83
Image valid

Image Signature verification was Successful.

Boot Time: 1/28/2024 15:44:59


[ 0.000000] Reserving ebda at 0x9f000 Len 0x61000
^▒
W▒▒{switching root to tmpfs
INIT: version 2.88 booting
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
Found card_index=21025
*** Running INXOS PE IFC image ***
*** Running INXOS PE IFC image ***
Skip /var/sysmgr setup to S26 script HW: 1, IFC: 1
*** Running INXOS PE IFC image ***
Starting udev
e2fsck 1.42.1 (17-Feb-2012)
/dev/hd-cfg0: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-cfg0

/dev/hd-cfg0: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-cfg1: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-cfg1
/dev/hd-cfg1: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-pss: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-pss

/dev/hd-pss: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-bootflash: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-bootflash

/dev/hd-bootflash: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-logflash: recovering journal
[ 188.527653] Uhhuh. NMI received for unknown reason 21 on CPU 0.
[ 188.598369] Do you have a strange power saving mode enabled?
[ 188.666034] Dazed and confused, but trying to continue
/sbin/e2fsck: unable to set superblock flags on /dev/hd-logflash

/dev/hd-logflash: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-recovery: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-recovery

/dev/hd-recovery: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-ifc-log: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-ifc-log

/dev/hd-ifc-log: ********** WARNING: Filesystem still has errors **********

Early mount of filesystems


mount: wrong fs type, bad option, bad superblock on /dev/sda4,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

@@@ Checking config for FIPS



CISCO SWITCH Ver7.64
Device detected on 0:6:0 after 0 msecs
Device detected on 0:1:1 after 0 msecs
Device detected on 0:1:0 after 0 msecs
MCFrequency 1333Mhz
Relocated to memory
Time: 1/28/2024 15:51:30
Detected CISCO IOFPGA
Donner Present
MIFPGA Present
Code Signing Results: 0x0
Using Upgrade FPGA
Checking and setting PSU fan directions
Booting from Primary Bios
FPGA Revison : 0x8
FPGA ID : 0x1345727
FPGA Date : 0x20160526
Power Debug Register: 0x0
Reset Cause Register: 0x80000004
Boot Ctrl Register : 0xe0ff
FPGA Update Status : 0x20
Detected CISCO MIFPGA
Version 2.16.1240. Copyright (C) 2013 American Megatrends, Inc.
Board type 2
IOFPGA @ 0xc8000000
SLOT_ID @ 0xf
Filesystem type is ext2fs, partition type 0x83
ACI chassis
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
Filesystem type is ext2fs, partition type 0x83

Booting bootflash:aci-n9000-dk9.13.2.6i.bin...
Booting bootflash:aci-n9000-dk9.13.2.6i.bin
Trying diskboot
Filesystem type is ext2fs, partition type 0x83
Image valid

Image Signature verification was Successful.

Boot Time: 1/28/2024 15:51:55


[ 0.000000] Reserving ebda at 0x9f000 Len 0x61000
▒▒W▒o▒{switching root to tmpfs
INIT: version 2.88 booting
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
Found card_index=21025
*** Running INXOS PE IFC image ***
*** Running INXOS PE IFC image ***
Skip /var/sysmgr setup to S26 script HW: 1, IFC: 1
*** Running INXOS PE IFC image ***
Starting udev
e2fsck 1.42.1 (17-Feb-2012)
/dev/hd-cfg0: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-cfg0

/dev/hd-cfg0: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-cfg1: recovering journal
/sbin/e2fsck: unable to set superblock flags on /dev/hd-cfg1

/dev/hd-cfg1: ********** WARNING: Filesystem still has errors **********

e2fsck 1.42.1 (17-Feb-2012)


/dev/hd-pss: recovering journal

You might also like