B.TECH.

MECHANICAL ENGINEERING
Year THIRD SEMESTER FOURTH SEMESTER
Subject Code Subject Name L T P C Subject Code Subject Name L T P C
MAT 2121 Engineering Mathematics - III 2 1 0 3 MAT 2230 Engineering Mathematics - IV 2 1 0 3
MIE 2121 Theory of Machines 3 1 0 4 MIE 2221 Design of Machine Elements 3 1 0 4
MIE 2122 Manufacturing Processes-I 3 0 0 3 MIE 2222 Materials Engineering 3 0 0 3
MIE 2123 Fluid Mechanics 2 1 0 3 MIE 2223 Metrology and Measurements 3 0 0 3
II
MIE 2124 Mechanics of Materials 2 1 0 3 MIE 2224 Turbomachines 2 1 0 3
MIE 2125 Thermal Engineering 3 1 0 4 MIE 2225 Manufacturing Processes - II 3 0 0 3
MIE 2141 Computer Aided Mechanical Drawing and Modelling 0 0 3 1 MIE 2241 Mechanics Lab 0 0 3 1
Lab
MIE 2142 Workshop Practice - I 0 0 3 1 MIE 2242 Workshop Practice - II 0 0 3 1
15 5 6 22 16 3 6 21
Total Contact Hours (L + T + P) 26 Total Contact Hours (L + T+ P) 25
FIFTH SEMESTER SIXTH SEMESTER
HUM 3021 Engineering Economics and Financial Management 2 1 0 3 HUM 3022 Essentials of Management 2 1 0 3
MIE **** Flexible Core1 (A1/B1/C1) 3 0 0 3 MIE **** Flexible Core2 (A2/B2/C2) 3 0 0 3
MIE 3121 Geometric Modelling 3 0 0 3 MIE **** Flexible Core3 (A3/B3/C3) 3 0 1 4
MIE 3122 Finite Element Methods 3 0 0 3 MIE **** Program Elective – I /(Minor Specialization) 3 0 0 3
MIE 3123 Heat and Mass Transfer 3 1 0 4 MIE **** Program Elective - II/(Minor Specialization) 3 0 0 3
III IPE 4302 OE-1 Creativity, Problem Solving and Innovation 3 0 0 3 *** **** Open Elective-2 3 0 0 3
MIE 3141 Mechanical Lab 0 0 3 1 MIE 3241 Finite Element Methods Lab 0 0 3 1
MIE 3142 Metrology Lab 0 0 3 1 MIE 3242 Heat Transfer and Solar Energy Lab 0 0 3 1
17 2 6 21 17 1 7 21
Total Contact Hours (L + T + P) 25 Total Contact Hours (L + T + P) 25
SEVENTH SEMESTER EIGHTH SEMESTER
MIE **** Program Elective – III / (Minor Specialization) 3 0 0 3 MIE 4291 Industrial Training 1
MIE **** Program Elective – IV/ (Minor Specialization) 3 0 0 3 MIE 4292 Project Work / Practice School 12
MIE **** Program Elective – V 3 0 0 3 MIE 4293 Project Work (B. Tech Honours) ** 20
MIE **** Program Elective - VI 3 0 0 3 MIE **** B Tech Honours (Theory 1)** (V Semester) 4
IV MIE **** Program Elective - VII 3 0 0 3 MIE **** B Tech Honours (Theory 2)** (VI Semester) 4
*** **** Open Elective--3 3 0 0 3 MIE **** B Tech Honours (Theory 3)** (VII Semester) 4
MIE 4191 Mini Project (Minor Specialization)* 8
18 0 0 18/26 13/33
Total Contact Hours (L + T + P) 18
*Applicable to students opted for minor specialization
**Applicable to eligible students opted for and successfully completed the B Tech – Honours requirements
Flexible Core Subjects V. Vehicle Technology HUM 4408: Project Finance
I. Design (A) MIE 4417: Automobile Engines and Combustion XII. Financial Technology
MIE 3124: Design for Manufacture & Assembly (A1) MIE 4418: Automotive Transmission HUM 4409: Financial Management
MIE 3221: Fatigue and Fracture (A2) MIE 4419: Electric & Hybrid Vehicles HUM 4410: Fintech Services
MIE 3224: Mechanical Vibrations (A3) MIE 4420: Autotronics HUM 4411: Financial Econometrics
II. Thermal (B) VI. Automation and Robotics HUM 4412: Technologies for Finance
MIE 3125: Green Energy Technology (B1) MIE 4421: Robotics: Mechanics and Control XIII. Entrepreneurship Development
MIE 3222: Refrigeration & Air Conditioning (B2) MIE 4422: Elements of Mechatronics Systems HUM 4413: Financial Management
MIE 3225: Computational Fluid Dynamics (B3) MIE 4423: Fluid Drives and Control HUM 4414: Entrepreneurship
III. Manufacturing (C) MIE 4424: Mechanical Handling Systems and Equipment HUM 4415: Design Thinking
MIE 3126: Heat Treatment of Metals and Alloys (C1) VII. Quality Engineering HUM 4416: Intellectual Property Management
MIE 3223: Machine Tool Technology (C2) MIE 4425: Statistical Quality Control XIV. People Management
MIE 3226: Automation in Manufacturing (C3) MIE 4426: Production Planning and Control HUM 4417: Human Resource Management
Minor Specializations MIE 4427: Operations Research HUM 4418: Organizational Behaviour
I. Machine Design MIE 4428: Total Quality Management HUM 4419: Professionalism & Ethics
MIE 4401: Design of Mechanical Systems VIII. Computer Techniques in Mechanical HUM 4420: Leadership & Decision Making
MIE 4402: Introduction to Continuum Mechanics for Engineering. XV. Professional Communication
Engineers MIE 4429: Programming in Mechanical Engineering HUM 4421: Public Speaking
MIE 4403: Lubrication and Rotor Dynamics MIE 4430: Metaheuristic Optimization Techniques HUM 4422: Intercultural Communication
MIE 4404: Modelling and Simulation of Dynamic MIE 4431: Machine Learning & its Applications HUM 4423: Corporate Communication
Systems MIE 4432: Microcontroller Based Automation HUM 4424: Technical & Business Writing
II. Manufacturing Technology IX. Aeronautical (MAHE DUBAI CAMPUS) XVI. Modern Literature
MIE 4405: Additive Manufacturing AAE ****: Introduction to Aircraft Structures HUM 4425: Understanding Literature
MIE 4406: Non-traditional Manufacturing Techniques AAE ****: Flight Dynamics and Control HUM 4426: Twentieth Century Literature
MIE 4407: Lean Manufacturing AAE ****: Aircraft Design HUM 4427: Comparative Literature
MIE 4408: Micro Machining MIE ****: Jet Propulsion HUM 4428: Modern Indian Literature
III. Thermal Engineering X. Computational Mathematics Other Programme Electives
MIE 4409: Cryogenics MAT 4401: Applied Statistics and Time Series Analysis MIE 4441: MEMS and Nano Technology
MIE 4410: Solar Thermal Systems MAT 4402: Computational Linear Algebra MIE 4442: Theory of Elasticity
MIE 4411: Design of Heat Exchanges MAT 4403: Computational Probability and Design of MIE 4443: Advanced Metrology
MIE 4412: Jet Propulsion Experiments MIE 4444: Industrial Automation & IOT
IV. Materials Engineering MAT 4404: Graphs and Matrices MIE 4445: Pipe Systems Engineering
MIE 4413: Processing of Polymers and Polymer XI. Business Management MIE 4446: Product Design and Development
Composites HUM 4401: Financial Management MIE 4447: Friction and Wear
MIE 4414: Metal and Ceramic Composite Materials HUM 4402: Human Resource Management MIE 4448: Applied Numerical Methods for
MIE 4415: Materials Characterization HUM 4403: Marketing Management Mechanical Engineers
MIE 4416: Fibre Reinforced Composite Mechanics & HUM 4404: Operation Management MIE 4449: Wind Energy Technology
Manufacturing Techniques XII. Finance & Investments MIE 4450: Biomechanics
HUM 4405: Financial Management MIE 4451: Non-destructive Testing of Materials
HUM 4406: Financial System MIE 4452: Project Management
HUM 4407: Security Analysis & Portfolio Management MIE 4453: Energy Audit, Conservation and Storage
MIE 4454: Automatic Control Engineering
MIE 4455: Industrial Safety Engineering

Open Electives
MIE 4311: Introduction to Composite Materials
MIE 4312: Introduction to Biomechanics
MIE 4313: Introduction to Operations Research
MIE 4314: Energy Engineering
MIE 4315: Introduction to Finite Element Methods
MIE 4316: Bio-Fluid Dynamics
 THIRD SEMESTER References:

MAT 2121: ENGINEERING MATHEMATICS - 1. Rattan S. S, Theory of Machines, Tata Mc-Graw

III [2 1 0 3] Hill Publishers Pvt. Ltd, New-Delhi, 2019.
2. Uicker J. J , Pennock G. R. and Shigley, J. E.,
Gradient, divergence and curl, Line, surface and Theory of Machines and Mechanisms, Oxford
volume integrals. Green's, divergence and Stoke's University press, 2014.
theorems. Fourier series of periodic functions. Half 3. Ballaney P. L., Theory of Machines, Khanna
range expansions. Harmonic analysis. Fourier Publishers, New Delhi, 2015.
integrals. Sine and cosine integrals, Fourier transform, 4. Singh, V. P., Theory of Machines, Dhanpat Rai
Sine and cosine transforms. Partial differential Publishing Company Ltd., 2004.
equation- Basic concepts, solutions of equations 5. Rao J. S. and Dukkipati R. V., Mechanism and
involving derivatives with respect to one variable only. Machine Theory, Wiley Eastern Ltd. Delhi, 1992.
solutions by indicated transformations and separation 6. Mata, Antonio Simón, Alex Bataller Torras, Juan
of variables. One-dimensional wave equation, one Antonio Cabrera Carrillo, Francisco Ezquerro
dimensional heat equation and their solutions. Juanco, Antonio Jesús Guerra Fernández, Fernando
Numerical solutions of boundary valued problems, Nadal Martínez, and Antonio Ortiz Fernández.
Laplace and Poisson equations and heat and wave Fundamentals of machine theory and mechanisms.
equations by explicit methods. Vol. 40. Cham: Springer, 2016.
References:
1. Erwin Kreyszig: Advanced Engineering
Mathematics, 5th edn. 1985 Wiley Eastern. MIE 2122: MANUFACTURING PROCESSES - I
2. S. S. Sastry: Introductory Methods of Numerical [3 0 0 3]
Analysis 2nd edn.1990, Prentice Hall. Types of moulding, Moulding materials, Sand Testing.
3. B. S. Grewal: Higher Engg. Mathematics, 1989 Various Casting techniques. Classification of welding
Khanna Publishers processes and its operational features. Sheet metal
4. Murray R. Spiegel: Vector Analysis, edn.1959, forming operations. High Energy rate forming
Schaum Publishing Co. processes. Theory of metal cutting, Machinability
parameters, Tool life and wear. Merchant’s analysis,
MIE 2121: THEORY OF MACHINES [3 1 0 4] Taylor’s equation. Cutting force and tool life
calculation. Lathe features, types, accessories and
Basic concepts: Mechanism and machine, Kinematic
attachments, lathe operations, calculations of thread
pair, link, chain, and inversions, constrained and
cutting and machining time. Types of Drilling
unconstrained motion, four-bar mechanism, single and
machines, twist drill nomenclature and computation of
double slider crank mechanisms with inversions.
drilling time. Types of milling machines, attachments,
Velocity and Acceleration: velocity in mechanisms by
milling operations, types of milling cutters, Indexing
relative velocity method, vector method, and
methods. Grinding wheel – Abrasive particles,
instantaneous center method, acceleration in the
Bonding materials, Designation, Constructional
mechanism by relative acceleration method. Toothed
features and principles of cylindrical, surface and
gearing: Law of gearing, Spur Gears - Terminology,
centreless grinding machines.
cycloidal and involute teeth, the minimum number of
teeth on the pinion to avoid interference, Terminology References:
of helical and bevel gears, epicyclic gear trains. Cams: 1. Rajput R. K., A Text book of Manufacturing
Types of Cams and followers, design of Cam profiles. Technology, Laxmi Publications Private Limited,
Static force analysis: Conditions for static equilibrium 2011.
of a member under the action of forces, analysis of 2. Khanna O.P., A text book of Production
slider-crank mechanism, four-bar mechanism. Technology (Vol1&2), Dhanpat Rai Publications,
Balancing of machinery: Balancing of rotating masses, 2011.
balancing of reciprocating masses, balancing of multi- 3. Rao P. N., Manufacturing Technology, Tata
cylinder in-line engines and V-engines. Gyroscopic McGraw-Hill Publishing Company Limited, 2006.
forces: Gyroscopic effect on the movements of an 4. Serope Kalpakejian and Steven Schmid R,
aircraft, ship, and automobiles. Manufacturing Engineering and Technology,
Pearson Education, 2005.
5. Paul DeGarmo E., Black J. T. and Ronald Kohser 6. Modi P. N., and Seth S. M., Hydraulics and Fluid
A, Materials and Process in Manufacturing, John Mechanics Including Hydraulics Machines, 21st
Wiley and Sons, 2004. ed., Standard Book House, 2018.
6. Lal M. and Khanna O. P., Foundry Technology, 7. Bansal R. K., Fluid mechanics and Hydraulic
Dhanpat Rai and Sons, 1991. machines, 1oth ed., Laxmi Publications (P) Ltd.
7. Jain R. K., Production Technology, Khanna New Delhi, 2019.
Publishers, 2001.
8. P. C. Sharma, A Textbook of Production
MIE 2124: MECHANICS OF MATERIALS
Technology, S. Chand Publishing, 2007. [2 1 0 3]
Shear force and bending moments in beams:
MIE 2123: FLUID MECHANICS [2 1 0 3] Classification of beams and loads, sign convention,
Properties of fluids – definition of various Shear force and bending moment. Stresses in beams:
hydrodynamic parameters, fluid continuum, different Theory of simple bending, bending and shear stresses
types of fluids. Fluid statics – Pressure and its in beams. Beam deflection: Relationship between
measurement, hydrostatic pressure forces on flat and slope, deflection and radius of curvature, double
curved surfaces, buoyancy and its stability. Kinematics integration method and Macaulay’s method. Torsion:
of fluid flow – methods of fluid flow description, Analysis of torsion of circular bars, shear stress
velocity and acceleration vectors, dimensions of fluid distribution, bars of solid and hollow circular section,
flow; path line, stream line, streak line and stream tube; stepped shafts. Principal stresses: Stresses in a uniaxial
rotational and irrotational flow; velocity potential & biaxial member, principal plane and principal stress,
function and stream function; translation, rotation and graphical method for evaluation of stresses. Columns
deformation of a fluid element. Dynamics of fluid flow and struts: Classification of columns, slenderness ratio,
– continuity equation, Euler’s equation, Reynold’s Euler’s formula, Rankine’s formula. Thin and thick
transport theorem, energy of a flowing fluid - Euler’s cylinders: Classification of cylinders, stresses in thin
equation of motion along a stream line, Bernoulli’s cylinders, lame’s theory for evaluation of stresses in
equation; Impulse momentum equation; Navier-Stokes thick cylinders. Materials and their properties:
equation. Dimensional analysis - Rayleigh’s method Stressstrain diagrams, Ductile and brittle fracture,
and Buckingham’s Pi-theorem, similitude, types of Material specification, Theories of failure, Factor of
similarity, significance of dimensionless numbers. safety.
Internal fluid Flow - Couette flow, Hagen Poiseuille’s
References:
flow, Reynolds experiment, Darcy equation, friction
factor, pipe roughness, Moody's Chart, Major loss and 1. Popov E.P, Engineering Mechanics of Solids,
Minor losses in pipe flow, Siphon, Venturimeter, Prentice-Hall of India, New Delhi, 1997.
Orifice meter and Pitot tube. External fluid flow – 2. Beer F. P. and Johnston R, Mechanics of Materials
boundary layer theory, displacement thickness, Von- (3e), McGraw-Hill Book Co, 2002.
Karman momentum integral equation; flow past 3. Nash W.A, Theory and problems in Strength of
submerged bodies, streamlined body, Bluff body. Materials, Schaum Outline Series, McGraw-Hill
Book Co, New York, 1995.
References: 4. Kazimi S.M.A, Solid Mechanics, Tata McGraw-
1. Cengel Yunus A., and Cimbala John M., Fluid Hill Publishing Co, New Delhi, 1981.
Mechanics-Fundamentals & Applications, 4th ed., 5. Ryder G.H, Strength of Materials (3e), Macmillan
McGraw Hill publications, 2018. India Ltd, 2002.
2. Frank M. White, Fluid Mechanics, 7th ed., 6. Ray Hulse, Keith Sherwin and Jack Cain, Solid
McGraw-Hill, 2011. Mechanics, Palgrave ANE Books, 2004.
3. Som S. K., Gautam Biswas, and Chakraborty S., 7. Singh D. K., Mechanics of Solids, Pearson
Introduction to Fluid Mechanics and Fluid Education, 2002.
Machines, 3rd ed., Tata McGraw Hill publications, 8. Timoshenko S, Elements of Strength of Materials,
2012. Tata McGraw-Hill, New Delhi, 1997.
4. Bruce R. Munson, Donald F. Young, and Teodore 9. Hearn, Edwin John, Mechanics of Materials 1: The
H. Okiishi, Fundamentals of Fluid Mechanics, mechanics of elastic and plastic deformation of
Wiley, 2009. solids and structural materials, Elsevier, 1997.
5. Kumar K. L., Engineering Fluid Mechanics, S.
Chand Publishing, New Delhi, 2016.
10. Hearn, Edwin John, Mechanics of Materials 2: The 6. Nag. P. K., Engineering Thermodynamics, 6th ed.,
mechanics of elastic and plastic deformation of Tata McGraw Hills, New Delhi, 2017.
solids and structural materials, Elsevier, 1997.
MIE 2141: COMPUTER AIDED MECHANICAL
MIE 2125: THERMAL ENGINEERING [3 1 0 4] DRAWING AND MODELLING LAB [0 0 3 1]
Basic concepts: definitions, reversible and irreversible Introduction to Machine drawing, Conventions,
processes, Zeroth Law, path and point function. Work Sectional views, Screw Thread Terminologies and
and heat transfer: Thermodynamic work, Displacement Thread Forms; Hexagonal and Square Head Bolts,
work, pdv work for various processes and heat transfer. Nuts and Screws; Introduction to Sketcher Exercises
First law of thermodynamics: open and closed systems, using CAD tool (CATIA Software); Modelling of
SFEE and PMM1. Second law of thermodynamics and machine components using CAD tool (CATIA
entropy: heat engines, reversed heat engines, Kelvin- Software); Assembly of machine components; Product
Planck and Clausius statements, PMM2, Carnot cycle, Drafting; Surface Modelling Exercises using CAD tool
Carnot theorem, entropy, Clausius inequality, entropy (CATIA Software).
change non-flow processes. Pure Substance:
References:
definitions, PVT surface, P-T diagram, dryness
fraction and its measurement, Tabulated properties, 1. Gopalakrishna K. R., Machine Drawing, Subhas
different processes for pure substances. Ideal and Real Publications, Bangalore, 2017.
gases: definition, different processes, property 2. Narayana K. L. and Kannaiah P, Text book on
evaluation, adiabatic mixing of ideal gases, Vander Engineering Drawing, Scitech Publications,
Waal’s equation, law of corresponding states, Chennai, 2011.
compressibility factor, generalized compressibility 3. Bhat N D ;Panchal V M., Machine drawing, Anand
chart. Power cycles: Rankine cycle, effect of operating Charotar Publishing House, 2007.
parameters, reheat cycle, Regenerative cycles and 4. Ibrahim K Zeid, CAD/CAM Theory and Practice,
properties of working substance, air standard Otto, Tata McGraw Hill, New Delhi, 2009.
Diesel dual cycles, air standard efficiency and 5. Sham Tickoo, CATIA V5R20for Engineers and
comparison, simple Brayton cycle and methods to Designers, Dreamtech Press New Delhi, 2019.
improve its performance. Reciprocating air
compressors: theory of compression, single stage MIE 2142: WORKSHOP PRACTICE – I [0 0 3 1]
compression, effect of clearance, volumetric
efficiency, multi-stage compression, and inter-cooling, Arc welding practice, Lap and Butt joints, Study of Gas
minimum work of compression. Refrigeration cycles: Welding, TIG and MIG Welding, Casting & Forging
Bell-Coleman cycle, vapour compression and vapour Practice, Plain turning, step turning, Taper turning &
absorption cycle, properties of refrigerants. Thread cutting using lathe, Facing, Step turning, Taper
Performance testing of IC engines: measurement of turning, Stock Removal Turning, Grooving, Thread
BP, IP and FP, various efficiencies, heat balance sheet, cutting, Drilling and boring using CNC Turning
principle of combustion in S.I and C.I engines. Center, Acceptance Test on Lathe and Drilling
machine.
References:
References:
1. Cenegel Yunus and Bole Michael,
Thermodynamics: An Engineering Approach,9th 1. Hajra Chaudhury S. K., Hajra Choudhury A. K. and
ed., McGraw Hill, New York, 2019. Nirjhar Roy, Elements of Workshop Technology,
2. Estop and McConkey, Applied Thermodynamics Vol. I, Media Promoters and Publishers Pvt. Ltd.,
for Engineering Technologies, 5th ed, Pearson 2003.
Education, Delhi, 2002. 2. Peter Smid, CNC Programming Hand book,
3. Mayhew A. and Rogers B., Engineering Industrial Press, New York, 2000.
Thermodynamics, 4th ed., E.L.B.S. Longman,
London, 2002.
4. Van Wylen and G. J. and Sonntag R. E.,
Fundamentals of Classical Thermodynamics, 4th
ed., John Wiley, New York, 2019.
5. Cengel, Thermodynamics and Heat Transfer, 2nd
ed., McGraw Hills, New York, 2009.
 FOURTH SEMESTER oil film thickness, Heat generation & dissipation.
MAT 2230: ENGINEERING MATHEMATICS - Rolling contact bearings: Types of ball and roller
IV [2 1 0 3] bearings, Life rating, Static and Dynamic load carrying
capacity, Selection of bearings. Selection of V belt
Special Functions: Series solutions of Bessel and
drive systems, Selection of rope drive systems and
Legendre differential equations, Recurrence formulae,
chain drive systems.
generating functions and Orthogonal properties for
Jn(x) and Pn(x). Probability, finite sample space, References:
conditional probability and independence, Bayes’ 1. Shigley J. E. and Mischke C. R.,Mechanical
theorem, one dimensional random variable: mean and Engineering Design, Eight Edition, McGraw Hill
variance, Chebyshev’s inequality. Two and higher Inc, New York, 2008.
dimensional random variables, covariance, correlation 2. Bhandari V. B., Design of Machine Elements, Third
coefficient, regression, least square principle of curve Edition, Tata McGraw-Hill Publishing Company
fitting. Distributions: binomial, Poisson, uniform, Limited, New Delhi, 2012.
normal, gamma, chi-square and exponential. Moment 3. Norton R. L., Machine Design - An Integrated
generating function, Functions of one dimensional and Approach, Second Edition, Prentice Hall Inc. New
two-dimensional random variables, Sampling theory, Jersey, 2007.
Central limit theorem and applications. 4. Juvenile R. C. and Marshek K. M., Fundamentals
References: of Machine Component Design, Fifth Edition, John
Wiley and Sons, Inc, New York, 2012.
1. Kreyzig E., Advanced Engineering Mathematics,
5. Maleev and Hartman, Machine Design, (Revised
7th ed., Wiley Eastern.
and edited by Drop Grover), CBS Publishers, New
2. Meyer P. L., Introduction to probability and
Delhi, 2018.
Statistical applications, 2nd ed., American
6. Hamrock B. J., Jacobson B.O. and Schmid S. R.,
Publishing Co., 1965.
Fundamentals of Machine Elements, Second
3. Hogg, and Craig, Introduction of Mathematical
Edition, Mc Graw Hill Inc., New York, 2005.
Statistics, 4th ed., MacMillan, 1975.
7. Mahadevan K. and Balaveera Reddy K., Machine
4. Grewal B. S., Higher Engg. Mathematics, Khanna
Design Data Hand Book, Fourth Edition, CBS
Publishers, 1989.
Publishers and distributors’ New Delhi, 2013.

MIE 2221: DESIGN OF MACHINE ELEMENTS MIE 2222: MATERIALS ENGINEERING

[3 1 0 4] [3 0 0 3]
Strength under combined axial, bending & torsional Introduction to materials, Solidification, Homogeneous
loads, Stress concentration. Stresses in curved beams. and heterogeneous nucleation, mechanism of
Fatigue: S-N diagram, Endurance limit, Variables solidification Phases in solids, Equilibrium diagrams,
affecting fatigue strength, Fluctuating stresses, Lever rule and its application, Iron-Carbon systems,
Goodman & Soderberg equations. ASME code for Allotropy and polymorphism, Fe-C equilibrium
design of transmission shafts, Mises Hencky theory for diagrams, Ferrous-alloys, Composition, properties and
transmission shafting, Stress concentration, Design of applications of Plain carbon steels & Alloy steels, Non-
shafts subjected to bending in two planes in addition to ferrous alloys, Types of Brasses, Bronzes and Al-Cu
axial loads. Keys: Types of keys, Stress in keys, Design alloys Introduction to composite materials.
of square, rectangular & taper keys and splines. Types
of welds, Strength of welds, Welded joints subjected to References:
eccentric loading, Stresses in bolts, Effect of initial 1. Avner S. H., Introduction to Physical Metallurgy,
tension, Bolts subjected to various eccentric loading 3rd ed., McGraw Hill, 2004.
conditions. Types of springs, Design of helical 2. William D. Callister, Materials Science and
compression springs - steady/ fluctuating loads, surge Engineering, John Wiley & Sons, 2007.
in spring, concentric springs. Design of Leaf springs: 3. Gupta K. M., Material science, Metallurgy and
Semi elliptic carriage springs, Stress equalization. Engineering Materials, Umesh Publication, 2012.
Nomenclature, Stresses in gear teeth, involute gears, 4. Raghavan V., Material Science and Engineering,
Lewis equation for beam strength of tooth, Form factor, 4th ed., Prentice Hall of India, 2003.
velocity factor, Static, Dynamic, Limiting load for 5. Chawla K. K., Composite Materials Science and
wear. Journal bearing-Terminology, Hydrodynamic Engineering, Springer Verlag, 2012.
lubrication, Stribeck curve, eccentricity and minimum
6. Jones R. M., Mechanics of Composite Materials, characteristics, iso-efficiency graph. Steam turbines:
McGraw-Hill, 1999. SFEE across a steam nozzle, D’laval Turbine, nozzle
MIE 2223: METROLOGY AND and blade efficiencies, need for compounding, curtis
MEASUREMENTS [3 0 0 3] stage, Rateau turbine, Parson’s reaction turbine.
Measurement systems, Definition of standard terms, References:
Measurement of pressure, temperature, strain, force,
1. Yahya S.M., Turbines Compressors and Fans, 4th
torque & shaft power. Limits, fits & tolerances, Types
ed., Tata Mc. Hill, New Delhi, 2017.
of fits, Gauges, Taylor’s principle, Measurement of
2. Seppo A. Korpela, Principles of Turbomachinery,
form errors, Straightness, squareness and flatness
John Wiley & Sons Ltd, 2nd Ed, 2019.
measurement, Surface texture, Screw thread
3. Dixon S.L., Fluid Mechanics, Thermodynamics of
measurement, Two-wire & three-wire method.
Turbomachinery, Pergamon, 6th Ed, 2010.
References: 4. V Kadambi, An Introduction to Energy Conversion:
1. Beckwith Thomas G., Mechanical Measurements, Turbomachinery - Vol. III, New Age International
Pearson Education, 2003. Private Limited, 2011.
2. Jain R.K., Engineering Metrology, Khanna 5. Maneesh Dubey, BVSSS Prasad, Archana Nema,
Publishers, 1997. Turbomachinery, 1st Ed, McGraw Hill Education,
3. Sawhney A.K., Mechanical Measurement & 2018.
Instrumentation, Dhanpat Rai and Co, 2002.
4. Nakra B.C. and Chaudry K.K., Instrumentation, MIE 2225: MANUFACTURING PROCESSES - II
[3 0 0 3]
Measurement and Analysis, Tata McGraw Hill,
2002. Hot and Cold Working of metals, forging processes,
5. Gupta I. C., Engineering Metrology, Dhanpat Rai Rolling of metals, Principle of rod and wire drawing,
Publications, 1997 Tube drawing, Principles of Extrusion. Broaching,
6. Raghavendra N.V. and Krishnamurthy L., Planing, Slotting, Shaper machines. Jigs and Fixtures,
Engineering Metrology and Measurements, Oxford Types, Analysis of locating and clamping methods.
University Press, 2013. Micro finishing Processes Chipless machining, Internal
and external thread rolling, Spline rolling. Powder
Metallurgy: Methods of powder production, Properties
MIE 2224: TURBOMACHINES [2 1 0 3]
of powdered metals. Surface Coating, Powder Coating,
Introduction: Types of turbo machines, dimensional CVD, PVD, Thermal Spray, Sputtering, Hard facing.
analysis and similitude, specific speed, affinity laws, Rapid prototyping, Fused Deposition Modeling,
Moody’s empirical efficiency formula. Energy Stereolithography, Laminated object manufacturing,
transfer: Euler turbine equation, degree of reaction, Selective Laser Sintering, Selective Powder Binding.
concept of utilization factor, zero angle turbine, head Economics of Machining, optimization of cutting
capacity relationship, effect of exit blade angle on parameters and its calculations.
performance. Thermodynamics of turbomachines:
Isentropic efficiency, infinitesimal polytrophic and References:
finite stage efficiencies, preheat factor and reheat 1. Rajput R. K., A Text book of Manufacturing
factor. Centrifugal pumps: Static pressure rise, Technology, Laxmi Publications Private Limited,
manometric head, various efficiencies, minimum 2011.
starting speed, cavitation and NPSH, slip and slip 2. Khanna O.P., A text book of Production
factor, main and operating characteristics, iso- Technology (Vol1&2), Dhanpat Rai Publications,
efficiency graph. Centrifugal compressors, blowers 2011.
and fans: h-s diagram, stage work, degree of reaction, 3. Rao P. N., Manufacturing Technology, Tata
need for limiting inlet relative velocity in high speed McGraw-Hill Publishing Company Limited, 2006.
compressors, phenomenon of surging. Axial flow 4. Serope Kalpakejian and Steven Schmid R,
compressors and fans: h-s diagram, velocity triangles, Manufacturing Engineering and Technology,
enthalpy and stagnation pressure loss coefficients, Pearson Education, 2005.
blade loading, degree of reaction, work done factor. 5. Paul DeGarmo E., Black J. T. and Ronald Kohser
Hydraulic turbines: Pelton turbine, work done and A, Materials and Process in Manufacturing, John
hydraulic efficiency, design parameters and governing, Wiley and Sons, 2004.
Francis turbine, draft tube theory, Kaplan turbine, 6. Lal M. and Khanna O. P., Foundry Technology,
governing of reaction turbines. main and operating Dhanpat Rai and Sons, 1991.
7. Jain R. K., Production Technology, Khanna FIFTH SEMESTER
Publishers, 2001. HUM 3021: ENGINEERING ECONOMICS AND
8. Chua C. K, Leong K F and Lim C S, FINANCIAL MANAGEMENT [2 1 0 3]
RapidPrototyping: Principles and Applications,
Time value of money, Interest factors for discrete
World Scientific, 2003.
compounding, Nominal & effective interest rates,
9. Sharma P. C., A Textbook of Production
Present and future worth of Single, Uniform, and
Technology, S. Chand Publishing, 2007.
Gradient cash flow. Related problems and case studies.
Bases for comparison of alternatives, Present worth
MIE 2241: MECHANICS LAB [0 0 3 1] amount, Capitalized equivalent amount, Annual
Fluid Mechanics: Coefficient of discharge for Orifice equivalent amount, Future worth amount, Capital
meter and Venturimeter, friction factor for pipes, recovery with return, Rate of return method,
Reynolds apparatus. Fluid Machines: Performance Incremental approach for economic analysis of
characteristics of Pelton turbine, Francis tubine, alternatives, Replacement analysis. Break even
Centrifugal pump and Gear pump. Strength of analysis for single product and multi product firms,
materials: Uniaxial test on ductile and brittle material, Break even analysis for evaluation of investment
Hardness tests on metals: Vicker, Brinell and alternatives. Physical & functional depreciation,
Rockwell, Torsion Test on Circular Shaft, Bending test Straight line depreciation, declining and double
on beam of uniform cross section and beam of uniform declining balance method of depreciation, Sum-of-the-
strength, Impact tests on metals: Charpy and Izod. Years Digits, Sinking Fund and Service Output
Methods, Case Study. Balance sheet and profit & loss
References: statement. Meaning & Contents. Ratio analysis,
1. Kumar K. L., Engineering Fluid Mechanics, S. financial ratios such as liquidity ratios, Leverage ratios,
Chand Publishing, New Delhi, 2016. Turn over ratios, and profitability ratios, Drawbacks.
2. C.P.Kothandaraman, Fluid Mechanics and Safety and Risk, Assessment of Risk and safety, Case
Machinery, 3rd ed., New Age International study, Risk Benefit Analysis and Reducing Risk.
Publishers, 2012. References:
3. R.K.Bansal, A Textbook of Strength of Materials:
Mechanics of Solids, 6th ed., Laxmi publications, 1. Chan S. Park, "Contemporary Engineering
2018. Economics", 4th Edition, Pearson Prentice Hall,
2007.
2. Thuesen G. J, “Engineering Economics”, Prentice
MIE 2242: WORKSHOP PRACTICE - II Hall of India, New Delhi, 2005.
[0 0 3 1] 3. Blank Leland T. and Tarquin Anthony J.,
Spur Gear cutting, Helical Gear cutting, Plain “Engineering Economy”, McGraw Hill, Delhi,
machining, Straight Slot machining & Taper Slot 2002.
machining using shaper, Face milling, Drilling and 4. Prasanna Chandra, “Fundamentals of Financial
Tapping, Contouring, slotting, Pocketing and boring Management”, Tata McGraw Hill, Delhi, 2006.
using Vertical Machining Center, Surface Grinding, -----------------------------------------------------------------
Cylindrical Grinding, Electro Discharge Machining,
Flexible Core 1
Machining using Wire EDM.
MIE 3124: DESIGN FOR MANUFACTURE AND
References:
ASSEMBLY [3 0 0 3]
1. Hajra C. S. K., Hajra C. A. K. and Nirjhar Roy,
Introduction: Essential factors of product design,
Elements of Workshop Technology, Vol. II, Media
morphology of design, producibility requirements in
Promoters and Publishers Pvt. Ltd., 2003.
design, Design for X, selection of materials and
2. Peter S., CNC Programming Hand book, Industrial
processes. Design for casting and forging: Sand
Press, New York, 2000.
casting-design rules, Investment casting design
guidelines, design guidelines for forging. Metal
Extrusion: Design recommendation for metal
extrusion, stamping, fine blanked parts, Rolled formed
section. Design for machining: Design guidelines for
turning, drilling, reaming, slotting, milling, grinding,
and heat treatment. Design for die-casting and injection
moulding: Design guidelines. Design for sheet metal energy, storage and transportation of hydrogen energy,
working and powder metal processing: Design utilization of hydrogen gas.
guidelines. Design for joining process: design
References:
recommendation for welding process, design for solder
and brazed assembly. Design for adhesively bonded 1. Duffie J. A. and Beckman W. A., Solar Energy
assemblies: design recommendations. Design for Thermal Processes, 4th ed., John Wiley and Sons,
additive manufacturing: design rules for additive Inc., 2013.
manufacturing. Design for assembly: importance of 2. Rai G. D., Non-Conventional Energy Sources,
DFA, basic DFA guidelines, product design for manual Khanna Publishers, 2006.
assembly, design for high-speed automatic assembly 3. Mittal K. M., Non-Conventional Energy Systems –
and robot assembly. Process engineering: Importance Principles, Progress and Prospects, Wheeler
of Fits, tolerance and surface finish in design, Publications, 1997.
manufacturing drawings.
References: MIE 3126: HEAT TREATMENT OF METALS
AND ALLOYS [3 0 0 3]
1. Geoffrey Boothroyd, Peter Dewhurst and Winston
A. Knight, Product Design for Manufacture and Iron-Carbon equilibrium diagram and fundamentals of
Assembly, CRC Press, 2011. heat treatment, Heat treatment processes viz.
2. James G. Brala, Design for Manufacturability Annealing, Normalising, Hardening, Tempering, etc.
Handbook, McGraw Hill, New York, 1999. Case and surface hardening treatments, Age hardening
3. Kevin Otto and Kristin Wood, Product Design, and thermomechanical treatments, Steel specification,
Pearson Education, Delhi, 2001. classification and heat treatment of steels and cast iron,
4. Chitale A. K. and Gupta R. C., Product Design and IS and AISI classification of steel, Heat treatment and
Manufacturing, Prentice Hall of India Pvt. Ltd., application of non-ferrous metals and alloys,
New Delhi, 2005. Aluminium alloys, Titanium alloys, Copper alloys,
5. George E. Dieter, Engineering Design, McGraw Defects, Causes and remedies in heat treatment.
Hill Book Co., Singapore, 2000. References:
6. Karl T. Ulrich & Steven D. Eppinger, Product
Design and Development, Irwin McGraw Hill, 1. Rajan T. V., Sharma C.P and Alok Sharma, Heat
Boston, 2003. treatment principles and techniques, PHI
Publication, 1999.
2. Bolton W., Engineering materials technology,
MIE 3125: GREEN ENERGY TECHNOLOGY Heinmann Newness, 2001.
[3 0 0 3] 3. Thelning K. E., Steel and its heat treatment,
Solar energy: Introduction, principle of conversion of Butterworth/Heinemann, 2000.
solar radiation into heat, types of solar collectors and 4. Romesh C. Sharma, Principles of Heat Treatment
their conversion, applications of solar energy of Steels, New Age International (P) Limited, 1996.
conversion –thermal, photovoltaics, hydrogen 5. Vijendra Singh, Heat Treatment of Metals,
production. Wind energy: Introduction, principle of Standard Publishers Distributors, 2012.
wind energy conversion, classification of wind 6. Avner S. H., Introduction to Physical Metallurgy,
turbines, components and materials, wind farm and site 3rd ed., McGraw Hill, 2004.
selection, applications of wind energy conversion – 7. William D. Callister, Materials Science and
grid connectivity, standalone, offshore, industries. Engineering, John Wiley & Sons, 2007.
Energy from Biomass: Introduction to biomass -----------------------------------------------------------------
conversion – wet and dry processes, anaerobic MIE 3121: GEOMETRIC MODELLING [3 0 0 3]
digestion and biogas generation, gasification and
pyrolysis, hydrothermal carbonization. Energy from Introduction to Computer Graphics and Coordinate
Fuel Cells: Introduction, design and operation of fuel systems: Introduction to computer graphics, Non-
cells, classification of fuel cells, advantages and interactive versus interactive computer graphics,
disadvantages, performance characteristics and Graphic Standards and mode of data transfer: Neutral
efficiency, application of fuel cells. Hydrogen energy: file formats. Geometric co-ordinate systems and
Introduction, production of hydrogen from various Display co-ordinate systems. Geometrical
methods – electrical, thermal, thermochemical, solar Transformation techniques: 2D Translation, Rotation,
Scaling and Reflection principles. Principle of
concatenated transformation and homogenous element, quadrilateral element, axisymmetric
coordinate system. Geometric modelling of Curves: triangular element, tetrahedral and hexahedral
Analytical Curve modelling and Synthetic Curve elements. Application of the Galerkin’s residual
modelling. Curve manipulation techniques. Geometric method to 1-D structural problem.
modelling of Surfaces: Analytical surface modelling
References:
and Synthetic surface modelling Surface manipulation
techniques. Geometric modelling of Solids: Solid 1. Chandrupatla T. R. and Belegundu A. D.,
modelling techniques - Boundary Representation, Introduction to Finite Elements in Engineering,
Constructive Solid Geometry, Analytical Solid Pearson Education, New York, 2001.
Modelling, Sweep Representation, Pure Primitive 2. Logan Daryl L., A First course in Finite Element
Instancing. Solid manipulation techniques. Method, 4th ed., Thompson Ltd, India, 2007.
3. Hutton David V., Fundamentals of Finite Element
Analysis, Tata McGraw Hill, India, 2005.
References: 4. Reddy J. N., An Introduction to Finite Element
1. Groover Mikell P. and Zimmers. Emory W., Method, 3rd ed., McGraw Hill International
Edition, New York, 2006.
Computer Aided Design and Manufacturing,
5. Segerlind Larry J., Applied Finite Element
Prentice Hall of India, New Delhi, 2000.
Analysis, 2nd ed., John Wiley, New York, 1984.
2. Rao P.N., CAD/CAM, Tata McGraw Hill
6. Desai C. S. and Abel J. F., Introduction to the Finite
Publishing Company Ltd., New Delhi, 2005.
Element Method: a numerical method for
3. Ibrahim K Zeid, CAD/CAM Theory and Practice, engineering analysis, Van Nostrand Reinhold Co.,
Tata McGraw Hill, New Delhi, 2009. 1971.
4. David F Rogers and J Alan Adams, Mathematical 7. Krishnamoorthy C. S., Finite Element Analysis –
Elements for Computer Graphics, Tata McGraw Theory & Programming, Tata McGraw-Hill
Hill, New Delhi, 2002. Education, 1994.
5. Ibrahim Zeid and R Sivasubramanian, CAD/CAM
Theory and Practice, TATA Mc Graw Hill
MIE 3123: HEAT AND MASS TRANSFER
Education Private Limited, New Delhi, Special
[3 1 0 4]
Indian Edition 2009.
6. Chougule N K, CAD/CAM/CAE, SCITECH Introduction: Modes of heat transfer, governing laws
Publications (India) Private Limited, Chennai, and its derivatives, overall heat transfer coefficient.
2010. Steady state conduction: General heat conduction
equation, heat flow through plane and composite wall,
cylinder and sphere, critical thickness of insulation,
MIE 3122: FINITE ELEMENT METHODS
temperature dependent thermal conductivity, plane,
[3 0 0 3]
cylinder and sphere with uniform rate of internal heat
Introduction to Finite Element Method, steps of FEM, generation. Heat transfer from extended surfaces, fin
advantages/disadvantages and applications of FEM, efficiency and effectiveness. Transient conduction:
discretization and element types, matrix algebra, Lumped system analysis, Biot and Fourier number,
efficient storage of Banded matrices, matrix solution time constant, transient heat conduction in large plane
methods for system of simultaneous equations, Eigen walls.Lumped system analysis. Convection heat
value problem, one/two point Gauss quadrature transfer: Velocity and thermal boundary layer,
method of numerical integration, basics of theory of dimensional analysis, free and forced convection heat
elasticity, plane stress/plane stress/axisymmetric transfer over flat plate, cylinder, sphere and in tubes.
problems, minimum potential energy principle, Boiling and condensation: Boiling regimes,
Rayleigh-Ritz’s method, Galerkin’s method, Basic correlations, film and drop-wise condensation, Nusselt
concepts of FEM, convergence, Pascal’s triangle, theory. Heat exchangers: types, analysis of heat
higher order quadrilateral/triangular elements, shape exchangers – LMTD and NTU method. Radiation:
functions for Lagrange/Serendipity elements and CST Characteristics, governing laws, radiation intensity,
element, application of direct stiffness method for one heat transfer between black surfaces and between gray
dimensional axially loaded bar and for one dimensional surfaces, radiation shields. Mass transfer: Mass
fluid element, Elimination and Penalty methods of diffusion, Fick’s law, diffusion of two species in a
handling boundary conditions, isoparametric stationary medium, steady mass diffusion through a
formulation of 1D bar element, plane/space truss wall, simultaneous heat and mass transfer.
element, plane/space frame element, triangular
References: References:
1. Yunus A. Cenzel and Afshin J. Ghajar, Heat and 1. Jain R. K., Engineering Metrology, Khanna
Mass transfer, 6th ed., Tata McGraw Hill, 2020. Publishers, 1997.
2. Thirumaleshwar M., Fundamentals of Heat and 2. Gupta I. C., Engineering Metrology, Dhanpat Rai
Mass Transfer, 1st ed., Pearson Education, 2006. Publications, 1997.
3. Rajput R. K., Heat and Mass Transfer, 7th ed., S 3. Raghavendra N. V., Krishnamurthy L.,
Chand Publishing, 2019. Engineering Metrology and Measurements,
4. Theodore L. Bergman, Adrienne S. Lavine, Frank Oxford University Press, 2013.
P. Incropera, David P. DeWitt, Fundamentals of
Heat and Mass Transfer, 8th Ed, Wiley Publications,
2018. SIXTH SEMESTER
5. R C Sachdeva, Fundamentals of Engineering Heat
HUM 3022: ESSENTIALS OF MANAGEMENT
and Mass Transfer (SI Units), New Age
[2 1 0 3]
International Private Limited, 6th Ed, 2022.
6. Holman J. P. and Bhattacharya Souvik, Heat Definition of management and systems approach,
Transfer, 10th ed., Tata McGraw Hill, 2017. Nature & scope. The Functions of managers, Principles
of Management. Planning: Types of plans, steps in
planning, Process of MBO, how to set objectives,
MIE 3141: MECHANICAL LAB [0 0 3 1]
strategies, policies and planning premises, Strategic
Determination of fuel Characteristics such as viscosity, planning process and tools. Nature and purpose of
flash and fire points, carrying out the performance test organizing, Span of management, factors determining
in a SI and CI engines, Performance test of an air the span, Basic departmentation, Line and staff
compressor and a blower, Determination of concepts, Functional authority, Art of delegation,
Compression ratio of an IC engine, Determination of Decentralization of authority. HR theories of planning,
dryness fraction of steam using Boy’s Gas calorimeter, Recruitment, Development and training. Theories of
sand testing, calibration of pressure gauges and motivation, Special motivational techniques.
governors, balancing of revolving masses. Leadership – leadership behavior & styles, Managerial
grid. Basic Control Process, Critical Control Points &
References:
Standards, Budgets, Non-budgetary control devices.
1. Ganeshan V., Internal Combustion Engines, 4th ed., Profit and Loss control, Control through ROI, Direct,
Tata McGraw Hill Education Private Limited, New Preventive control. PROFESSIONAL ETHICS -
Delhi, 2017. Senses of Engineering Ethics, Variety of moral issues,
2. Mathur M. L., and Sharma R. P., Course in Internal
Types of inquiry, Moral dilemmas, Moral Autonomy,
Combustion Engines, 8th ed., Dhanpath Raj
Kohlberg’s theory, Gilligan’s theory, Consensus and
Publishers, New Delhi, 2010.
Controversy, Models of professional roles, Theories
3. Rattan S. S., Theory of Machines, 4th ed., Tata Mc- about right action, Self-interest, Customs and Religion,
Graw Hill Publishers Pvt. Ltd, New-Delhi, 2014. Uses of Ethical Theories. GLOBAL ISSUES -
4. Cengel, Thermodynamics and Heat Transfer, 2nd Managerial practices in Japan and USA & application
ed., McGraw Hills, New York, 2008. of Theory Z. The nature and purpose of international
5. Nag. P. K., Engineering Thermodynamics, 6th ed., business & multinational corporations, unified global
Tata McGraw Hills, New Delhi, 2017. theory of management, Entrepreneurship and writing
business plans. Multinational Corporations,
MIE 3142: METROLOGY LAB [0 0 3 1] Environmental Ethics, Computer Ethics, Weapons
Development, Engineers as Managers, Consulting
Measuring instruments and gauges, Screw thread Engineers, Engineers as Expert Witnesses and
measurements, Measurement of effective diameter of Advisers, Moral Leadership, Code of Conduct,
external screw threads, Comparators, Gear Corporate Social Responsibility.
measurement, Radius and angle measurement,
Calibration of Micrometer and Vernier caliper, Surface References:
texture and straightness measurement, Use of Profile 1. Harold Koontz & Heinz Weihrich (2020),
projector, Coordinate Measuring Machine and “Essentials of Management”, McGraw Hill, New
Interferometer. Delhi.
2. Peter Drucker (2004), “The practice of
management”, Harper and Row, New York.
3. Vasant Desai (2007), “Dynamics of MIE 3222: REFRIGERATION AND AIR
entrepreneurial development & management”, CONDITIONING [3 0 0 3]
Himalaya Publishing House. Basic concepts and Air refrigeration cycles: Basic
4. Poornima M Charantimath (2006), terminologies, uses of refrigeration and air
“Entrepreneurship Development”, Pearson conditioning, different refrigeration cycles, air
Education. refrigeration cycles for aircrafts. Vapour compression
----------------------------------------------------------------- and absorption refrigeration systems: Thermodynamic
analysis, absorption refrigeration, absorption versus
Flexible Core 2 compression, refrigerants for vapor compression and
MIE 3221: FATIGUE AND FRACTURE [3 0 0 3] absorption systems. Other refrigeration cycles:
Thermoelectric refrigeration, Vortex tube refrigeration,
Fatigue and fracture overview, deformation and failure Steam jet refrigeration. Psychrometrics: Properties of
modes of engineering materials, fatigue types, design air-vapour mixtures, psychrometric charts, process
philosophies, mechanism; High-cycle fatigue, fatigue involving air-vapour mixtures. Air Conditioning: Air-
loads and tests, stress-life (S-N) curves, mean stress conditioning systems and applications- Unitary and
effects, constant life diagrams, influencing factors, central systems. Summer and winter air conditioning
stress concentration and notch effects, life estimation systems. Cooling load calculations: Air conditioning
using S-N approach, cumulative damage theories; load estimation, sensible and latent heat gain from
Low-cycle fatigue, monotonic and cyclic stress-strain internal and external sources, RSHF, RLHF, GTHF.
behavior, CSSC determination, stress-plastic strain
relationship, cyclic deformation and crack initiation in References:
ductile and brittle solids, transition life, strain life 1. Arora S. C. and Domkondwar S., Course in
equations, mean stress effects, notch strain analysis, Refrigeration and Air-conditioning, Danpath Rai.
examples of life estimation; Linear elastic fracture New Delhi, 2018.
mechanics, fracture modes and mechanisms, Griffith’s 2. Prasad Manohar, Refrigeration and Air-
analysis, energy release rate, elastic crack tip fields, conditioning, 3rd ed., New Age International Pvt.
stress and displacement field, stress intensity factor, Limited. New Delhi, 2021.
crack tip plasticity, plastic zone shape and size, 3. Rex Miller, Mark Miller, Air Conditioning and
Rcurves, fracture toughness; Fatigue fracture Refrigeration, McGraw Hill Professional, 2006.
mechanics, dynamic crack growth, crack closure and 4. Dossat R. J., Principles of Refrigeration, 4th ed.,
fatigue threshold, effect of variable amplitude and over Pearson Education India, 2002.
loading cycles, prediction of life of a structural 5. Alfred F. Bracciano, Andrew D. Althouse, Carl H.
component, generation of crack growth plots. Turnquist, Daniel C. Bracciano, Gloria M.
References: Bracciano, Modern Refrigeration and Air
Conditioning, 21st Ed, G-W publishers, 2021.
1. Bannantine Julie A, Jess J Comer and Handrock
James L, Fundamentals of Metal fatigue and
Analysis, Prentice Hall, Upper Saddle River, NJ, MIE 3223: MACHINE TOOL TECHNOLOGY
1990.
2. Dowling Norman E, Mechanical Behavior of [3 0 0 3]
Materials, Fourth Edition, Pearson Publications, Introduction to Machine Tool Drives and Mechanisms:
USA, 2017. Machine tool drives-individual drive, Group drive,
3. Stephens Ralph I, Fatemi Ali, Stephens Robert R Regulation of Speeds and Feeds: Stepped Regulation
and Henry, Metal fatigue in Engineering, Second of Speeds, Flow Diagram, Structural diagram, Ray
Edition, John Wiley and Sons Inc, New York, diagram, Speed diagram, Machine tool structures:
2001. Basic Design procedure of machine tool structures,
4. Suresh S, Fatigue of Materials, Second Edition, Guide ways, Spindles, Spindle assembly of lathe,
Cambridge University Press., UK, 1998. Milling & Drilling machines, Design of Spindle,
5. Prashant Kumar, Elements of Fracture Mechanics, Requirements of Spindle Supports, Selection of sliding
McGraw Hill Education Private Limited, 2013. and antifriction bearings, Vibration of machine tools.
6. Anderson T. L., Fracture Mechanics-
Fundamentals and applications, Third Edition,
CRC Press, London, 2017.
References: MIE 3225: COMPUTATIONAL FLUID
DYNAMICS [3 0 1 4]
1. Mehta N. K., Machine Tool Design & Numerical
control, Tata McGraw Hill Publishing Co. Ltd., Introduction: Numerical, experimental and analytical
2012. methodology, advantages, limitations, need for CFD,
2. Sen G.C., Bhattacharya I., Principles of Machine CFD process, equilibrium and marching problems,
Tools, New Central Book Agency, 2009. mathematical behavior of Parabolic, Hyperbolic and
3. C. M. T. I., Machine Tool Design Handbook, Tata Elliptic PDE, governing equations of flow and energy,
McGraw Hill Publishing Co. Ltd., 2004. boundary condition and its types, demonstration of
4. Pal D. K., BASU S. K., Design of Machine Tools, CFD software tool. Finite Difference Method: Finite
Oxford and IBH, 2008. difference representation of PDE, Taylor’s series
5. George Schlesinger, Testing Machine Tools, expansion, truncation, discretization and round-off
Deutsche Nationalbibliothek, 2017. errors, consistency, stability, polynomial fitting, finite
difference method for steady and unsteady heat
-----------------------------------------------------------------
conduction. Finite Volume Method: Finite volume
Flexible Core 3 method for 1D and 2D steady state diffusion problems,
FVM for Convection-diffusion problems: Steady 1D
MIE 3224: MECHANICAL VIBRATION [3 0 1 4] convection-diffusion, discretization schemes-Upwind,
Introduction to vibration: Importance, scope, central, power law and hybrid, QUICK, properties of
definition, terminology, limits of vibration severity. discretization schemes, Flow simulation for steady and
Single degree free vibration: Natural frequency by unsteady turbulent internal flow using different
Newton’s Classical method and Energy method, discretization schemes. Pressure-Velocity Coupling:
Longitudinal, lateral and torsional vibration, Pendulum Need for Staggered grid, SIMPLE, SIMPLER,
and pulley systems. Damped free vibration: Influence SIMPLEC, PISO algorithm, Turbulence and its
of damping on Vibration, types of Viscous damping, modelling: Concept of turbulence, RANS, turbulence
Coulomb damping. Forced vibration: system is models, Flow simulation for turbulent flow over flat
subjected to harmonic excitation, rotating and plate and pipes using turbulence models.
reciprocating unbalance, force and displacement
References:
transmissibility, vibration isolation, whirling of shafts,
critical speed of shaft. Vibration measurement: 1. Anderson Jr. J. D., Computational Fluid
Transducers, vibrometer, accelerometer, frequency Dynamics, Tata McGrawHill, 2013.
measuring instruments, exciters, machine condition 2. Versteeg H., Malalasekera W., An Introduction to
monitoring using vibration signals. Two degree of Computational Fluid Dynamics: The Finite
freedom system: Natural frequencies and mode shapes Volume Method, 2nd ed., PHI, 2007.
of vibration by Classical method and Lagrange’s 3. Ghoshdastidar P. S., Computational Fluid
generalized method, Dynamic vibration absorber, Dynamics and Heat Transfer, 1st ed., Cengage
Centrifugal pendulum absorber. Multi degree freedom Learning, 2017.
system: Natural frequency of free vibration by 4. Muralidhar K., Sundarrajan T., Computational
Influence coefficient method, Matrix iteration method, Fluid Flow and Heat Transfer, Narosa Publishing
Rayleigh’s method, Dunkerley’s method, Stodola House, 2014.
method and Holzer’s method.
References: MIE 3226: AUTOMATION IN
1. Singirisu Rao S., Mechanical Vibration, Pearson MANUFACTURING [3 0 1 4]
Education, Delhi, 5th ed., 2011. CNC Machines: Design considerations in CNC
2. S. Graham Kelly, Fundamentals of Mechanical Machines, Methods of improving machine accuracy
Vibrations, McGraw-Hill, Singapore, 2nd ed., and productivity, Machine structure, Guideways,
2000. Spindle and Feed drives, Spindle Bearings,
3. Rao J. S. and Gupta K., Introductory Course on Interpolators CNC Toolings, Distributed Numerical
Theory and Practice of Mechanical Vibrations, Control, Adaptive Control Machining System,
New Age Publishers, 2nd ed., 1999. Coordinate measuring machines, NC programming for
4. Groover G. K., Mechanical Vibrations, Nem Turning Center and Machining Center by Manual
Chand and Bros, 8th ed., 2009. method, CNC programming with interactive graphics.
5. Seto W. W., Theory and Problems in Mechanical Industrial Robotics Physical configurations,
Vibrations, McGraw-Hill Publication, 1989.
Manipulator Kinematics, Robot programming, End 6. Chen Xiaolin Liu Yijun, Finite element modeling
effecters, Work cell design, Work cell control and and simulation with ANSYS workbench, New
interlock, Robotic sensors, Robotic applications. York CRC Press, 2015.
Group Technology , FMS and CIM, Computer aided
Process planning, Material requirement planning.
Capacity planning, Shop floor control, Automated data MIE 3242: HEAT TRANSFER AND SOLAR
collection systems. ENERGY LAB [0 0 3 1]

References: Heat transfer: Analysis of parallel and counter flow

heat exchangers, Heat transfer from a pin fin under free
1. Yoram Koren and Ben Uri J., Numerical Control
and forced convection, determination of thermal
of Machine Tools, Khanna Publishers, New Delhi,
conductivity of a metallic bar and insulating powder,
2005.
heat transfer through a composite wall, determination
2. Groover Mikell P., Automation, Production
of emissivity, Stefan Boltzmann apparatus, calibration
Systems, and Computer Integrated manufacturing,
of temperature measuring instruments. Solar Energy:
Prentice Hall of India, New Delhi, 2003.
Performance evaluation of air heater, water heater, box
3. Groover Mikell P. and Zimmers Emory W.,
cooker, paraboloid concentrator, performance
Computer Aided Design and Manufacturing,
characteristics of a Photovoltaic module.
Prentice Hall of India, New Delhi, 2003.
4. Radhakrishnan P., Computer Numerical Control References:
Machines, New Central Book Agency (P) Ltd., 1. Holman J. P. and Bhattacharya Souvik, Heat
Kolkata, 2004. Transfer, 10th ed., Tata McGraw Hill, 2017.
----------------------------------------------------------------- 2. Cenzel Yunus A. and Ghajar Afshin J., Heat and
Mass transfer, 6th ed., Tata McGraw Hill, 2020.
MIE 3241: FINITE ELEMENT METHODS LAB 3. Kalogirou Soteris A., Solar Energy Engineering,
[0 0 3 1]
2nd ed., Academic Press, 2014.
Analysis of Truss and Beams Using Ansys APDL; 2D 4. Sukhatme S. P. and Nayak J. K., Solar Energy, 4th
Structural analysis using Ansys APDL; 3D Structure ed., Tata McGraw Hill, 2017.
Analysis Using Ansys by importing CAD Model; 3D
Structure and Thermal Analysis - Importing the CAD
model to Ansys Workbench (Both steady-state and SEVENTH SEMESTER
Transient Analysis) using Ansys Workbench; Shell
Analysis (Composite) using Ansys Workbench; Modal Minor Specialization
and Harmonic Analysis Using Ansys Workbench; CFD Program Electives
analysis using Ansys Workbench – 1 (External and
Internal flow -Laminar and Turbulent); Fluid-Structure Open Electives as mentioned later.
analysis using Ansys Workbench; Explicit Dynamics;
Nonlinear Analysis of Structural application.
EIGHTH SEMESTER
References:
MIE 4291: INDUSTRIAL TRAINING [0 0 0 1]
1. Chandrupatla T. R. and Belegundu A. D.,
Introduction to Finite Elements in Engineering, Student is undergoing industrial training for a
Pearson Education, New York, 2002. minimum period of 4 weeks during the vacation. After
2. Logan Daryl L., A First course in Finite Element successful completion of training, student is submitting
Method – Fourth India Edition, Thompson Ltd, a report to the department and makes a presentation on
India, 2007. training.
3. Zahavi Eliahu, The Finite Element Method in
Machine Design, Prentice Hall Inc, USA, 1992.
4. Ramamurthy V., Computer Aided Mechanical MIE 4292: PROJECT WORK / PRACTICE
SCHOOL [0 0 0 12]
Design and Analysis, Tata McGraw Hill, Delhi,
1997. The student is required to carry out a project work in
5. Tickoo Sham, ANSYS workbench 14.0 for the institution / industry / research LAB / institution of
Engineers and designers Tutorial, New Delhi higher learning. The minimum duration of the project
Dreamtech publisher, 2014. work/practice school is 16 weeks. As part of project
work / practice school, the student is also required to
prepare a project report and make a presentation on the anisotropic, orthotropic and isotropic materials. 2D
work carried out. Elasticity and Applications: Plane stress, Plane strain
and Axisymmetric problems, Airy’s stress function,
PROGRAM ELECTIVES
Applications to Thick shells, Rotating disk, Stress
MIE 4441: MEMS AND NANOTECHNOLOGY concentration due to circular hole. 3D Elasticity and
[3 0 0 3] Applications: Betti-Maxwell Reciprocal Theorem,
Overview of Micro Electro Mechanical Systems and Torsion of a uniform circular, non-circular Bars,
Microsystems, Applications of microsystems, Working Membrane Analogy. Introduction to Plasticity:
principles of microsystems micro sensor, micro Constitutive relations, Problems contained plastic
actuators, micro accelerometers, microfluidics, Design deformation, strain rate effects, idealization, Yield
of microsystems, Scaling laws in miniaturization, criteria, plastic stress-strain relations.
materials for MEMS and microsystems, fabrication References:
process, micro manufacturing methods bulk micro
1. Timoshenko S. P. and Goodier J. N., Theory of
manufacturing, surface micromachining, LIGA
Elasticity, 3rd edition, McGraw-Hill, 2010.
Process. General methods of preparation of nano
2. Srinath L. S., Advanced Mechanics of Solids, Tata
particles, Carbon nanostructures and their
Mc-Graw Hill Book Company, 3rd ed., 2017.
Applications. Physical chemistry of Nano systems,
3. Sadd M. H., Elasticity, Elsevier Publishers, New
Nanoparticles, Nanowires and Nanorods, Thin films-
Delhi, 2014.
Self assembled monolayers, Experimental techniques-
4. Sokolnikoff I. S., Mathematical Theory of
Atomic Force Microscopy, Scanning Tunnelling
Elasticity, Krieger Publishing Company, 1983.
Microscopy, Spectroscopy and Diffraction techniques.
5. Shames I. H., Mechanics of Deformable Solids,
Nanomaterials used in energy and Environmental
Krieger Publishing Company, 1983.
applications and their Properties. Device applications
6. Sadhu Singh, Theory of Elasticity, 1st Edition,
in hydrogen storage and Production, Fuel cells,
Khanna Publishers, 1978.
Battery, Solar energy conversion, Waste water
7. Helena H. Jane, Theory of Elasticity and Plasticity,
treatment, Pollution remedies, Nanomaterials in
Paperback, PHI Learning, 2017.
automobiles.
8. Singh Sadhu, Theory of Plasticity and Metal
References: Forming Process, 1st Edition, Khanna Publishers,
1. Tai Ran Hsu, MEMS and Microsystems- Design 1980.
and Manufacturing, TATA McGraw Hill, 2002.
2. James J Allen, MEMS Design, Taylor and Francis MIE 4443: ADVANCED METROLOGY [3 0 0 3]
Publication, 2005. Mohamed Gad-el-Hak, The
Introduction, End & line standards for length, Airy &
MEMS Handbook, Taylor and Francis
Bessel points, photoelectric microscope and Moir
Publication, 2005.
fringe techniques, Fixed & Indicating Gauges, Taylor’s
3. Charles P Poole, Introduction to Nanotechnology,
principles of gauge design, Comparators, Pre-process,
Wiley Publication, 2003.
In-process & Post process gauging, Usage of LVDT &
4. Guozhong Cao, Nanostructures & Nanomaterials,
Capacitive type gauge heads, Automatic inspection,
Imperial College Press, 2004.
Measuring Machines, Floating carriage diameter
5. C B Sobhan, Microscale and Nanoscale Heat
measuring m/c, Universal measuring m/c, Matrix
Transfer, Taylor and Francis Publication, 2008.
internal diameter measuring machine, Optical dividing
6. Murthy B. S., Shankar P., Textbook of
head, Coordinate measuring machine, Design
Nanoscience and Nanotechnology, Universities
principles of measuring machines Abbe’s rule, Form
Press (India) Private Ltd, 2013.
Errors, Evaluation of straightness, flatness &
roundness, Surface Finish, stylus instrument
MIE 4442: THEORY OF ELASTICITY [3 0 0 3] (TALYSURF), M & E systems usage of
Analysis of Stresses: stress transformation, stress interferograms, Screw Threads, Measurement of thread
invariants, Principal stresses, Mohr’s circle for stress elements for internal & external threads, progressive
transformation, Octahedral stresses, Balance Laws for periodic, drunkenness and irregular pitch errors, NPL
3D Elasticity. Analysis of Strains: strain displacement pitch measuring machine, Gears, Measurement of tooth
relationship, Strain Tensor, Compatibility equations. thickness, involute profile, pitch, concentricity and
Constitutive Laws: Generalized Hooke’s law, alignment, Rolling gear test.
Formulation of constitutive laws, Elastic constants for
References: due to external fluid pressure, High/low pressure pipes.
Planning and construction of pipelines: Piping drawing
1. Jain R. K., Engineering Metrology, Khanna
basics, Development of plot plan, Process piping
Publishers, 1997.
layout, Utility piping layout, Selection of supports &
2. ASTME, Hand Book of Industrial Metrology,
expansion joints, Flexibility analysis. Protection of
Prentice Hall of India Pvt. Ltd., 1967.
pipelines: Pipeline damage due to corrosion, abrasion,
3. Gupta I. C., A Text Book of Engineering
heating and freezing, Protection methods - Lining,
Metrology, Dhanpat Rai & Sons, 2018.
coating, insulation, jacketing etc. Industrial pipelines:
4. Bosch John A., Giddings, and Dayton Lewis,
Non-Newtonian fluid flow, Single phase compressible
Coordinate Measuring Machines and Systems,
flows - Flow analysis for ideal gas, flow analysis for
Marcel Dekker, 1999.
real gas, Multi-phase flows – Slurry pipelines,
Pneumotransport, Capsule pipelines.
MIE 4444: INDUSTRIAL AUTOMATION AND References:
IOT [3 0 0 3]
1. Henry Liu, Pipeline Engineering, Lewis
Basic concepts of process automation, Architecture of Publishers, CRC Press LLC, Florida, 2003.
industrial automation network, Basics, Design & 2. Antaki George A., Piping and Pipeline
Architecture of Programmable Logic Controller Engineering: Design, Construction, Maintenance,
(PLC), PLC Programming Tools, Roles of computer in Integrity, and Repair, CRC Press, 2003.
automation, Architecture of computer based industrial 3. Larock Bruce E., Jeppson Roland W., and Watters
automation, Hardware and software configuration, Gary Z., Hydraulics of Pipeline Systems, CRC
Basic concepts of Distributed Control System (DCS), Press LLC, Florida, 2000.
Basic concepts of Supervisory Control and Data 4. Nayyar Mohinder L., Piping Handbook, McGraw-
Acquisition (SCADA), Cloud computing, Edge Hill, 2000.
computing, Basics of internet of things (IoT) and
industrial internet of things (IIoT).
MIE 4446: PRODUCT DESIGN AND
References: DEVELOPMENT [3 0 0 3]
1. Dey C., Sen S.K., Industrial Automation New Product Development: Introduction to New
Technologies, CRC Press, 2020. Product Development, Evolution of design, types of
2. Lamb F., Industrial Automation: Hands On, design, the design process, product life cycle, generic
McGraw-Hill Education, 2013. product development process, Strategic Planning and
3. Comer D., The Cloud Computing Book: The Opportunity Identification for new products,
Future of Computing Explained, CRC Press, 2021. Identifying Market Opportunities. Translation of needs
4. Buyya R., Srirama S. N., Fog and Edge into Specifications: Understanding Customer and User
Computing: Principles and Paradigms, Wiley, Needs, need gathering methods, clarification, explore
2019. systematically, establishing product specification,
5. Ismail Y., Internet of Things (IoT) for Automated competitive benchmarking. Creativity and Innovation:
and Smart Applications, Intech Open, 2019. Creative thinking, creativity and problem solving,
creative thinking methods, generating design concepts,
systematic methods for designing, morphological
MIE 4445: PIPE SYSTEM ENGINEERING methods, TRIZ methodology, Value Analysis. Concept
[3 0 0 3] Development: Concept Generations, Concept
Screening, Concept Scoring, Concept Testing methods.
Introduction: Definition and scope, Importance
Embodiment Design: Introduction to embodiment
advantages of transport by pipeline, Piping elements.
design, product architecture, types of modular
Codes and standards: ASME codes, Materials of
architecture, steps in developing product architecture,
construction, Pipe sizes. Single phase incompressible
Industrial design, human factors design, user friendly
flow: Flow regimes, Development of velocity profile,
design. Design for X: Design for serviceability, design
Pressure drop calculations, Bernoulli’s equation, Major
for environment, prototyping and testing, Cost
and minor losses, Hydraulic and energy grade lines.
evaluation, Design for Quality, Reliability, Failure
Pipe networks: Pipe hydraulics and sizing, Pump and
Mode and Effect Analysis, Test and Inspection,
pipe system matching, H-Q curves, Pipes in series and
Maintenance, Warranty. Supporting Techniques:
parallel, Pipe network analysis. Structural design of
Concurrent engineering, design thinking.
pipe lines: Stress due to internal fluid pressure, Stress
References: 4. Kragelsky I. V., Alisin V.V., Friction Wear
Lubrication – Tribology handbook, Elsevier
1. Ulrich Karl T., and Eppinger Steven D., Product
Science & Technology, Kent, 2016.
Design and Development, 6th ed., McGraw-Hill,
5. Majumdar B. C., Tribology of Bearings, S Chand,
2015.
2010.
2. Cooper Robert G., Winning at New Products:
Creating Value through Innovation, Hachette
Book Group, New York, 2017.
MIE 4448: APPLIED NUMERICAL METHODS
3. Starc John, Product Lifecycle Management
FOR MECHANICAL ENGINEERS [3 0 0 3]
(Decision Engineering), Springer Publications,
2015. Introduction to MATLAB Programming: MATLAB
4. Otto Kevin and Wood Kristin, Product Design environment, Mathematical Operations, Good
Techniques in Reverse Engineering and New Programming practices. Approximations and Errors:
Product Development, Pearson Education (LPE), Round-off Errors, Truncation Errors, Total Numerical
2001. Error, Model Errors. Roots Finding-Bracketing and
5. Chitale A. K., and Gupta R. C., Product Design Open methods: Roots in Engineering and Science,
and Manufacturing, 6th ed., Prentice–Hall of India, Newton-Raphson Method. Linear Algebraic
2013. Equations: Gauss elimination, LU factorization,
6. NPTEL Courses: Product Design and Cholesky factorization, Jacobi Method, Gauss-Seidel
Development, method. Curve Fitting and Interpolation: Linear,
https://nptel.ac.in/courses/112107217. polynomial and nonlinear Regression, Splines and
7. NPTEL Courses: Design Thinking - A Primer, piecewise interpolation. Numerical Differentiation and
https://nptel.ac.in/courses/110106124. Integration: Richardson Extrapolation, Derivatives of
unequally spaced data, Partial Derivatives, The
trapezoidal rule, Simpson’s Rules, Higher-Order
MIE 4447: FRICTION AND WEAR [3 0 0 3] Newton-Cotes formulas, Numerical Integration of
Surface interactions, influence of material properties, Functions-Romberg integration, Gauss quadrature.
measurement methods of surface interactions, friction, Differential Equations: Initial and Boundary value
types of friction, measurement of friction, wear & types problems, Euler's Method, Runge-Kutta Methods,
of wear, importance of wear, different types of wear, Applications using relevant Case Studies.
wear testing methods as per ASTM standard, adhesive
References:
wear, types of adhesive wear, mechanism of adhesive
wear, materials used in adhesive wear situations. 1. Chapra S. C., Applied Numerical Methods with
Abrasive wear, types of abrasive wear, mechanisms of MATLAB for Engineers and Scientists, Indian
abrasive wear, erosive wear, types and mechanisms of Edition, McGraw Hill, 2012.
erosive wear, corrosive wear, fatigue wear, fretting 2. Mathews J. H. and Fink K. D., Numerical methods
fatigue wear and respective wear mechanisms. using MATLAB. Pearson Prentice Hall, 1999.
Lubrication: Lubricants, types of lubricants, required 3. Ralston A. and Rabinowitz P., A First Course in
and desired characteristics, testing methods. Numerical Analysis, McGraw Hill, 2001.
Hydrodynamic, hydrostatic and elasto-hydrodynamic 4. Salvadori M. G. and Baron M. L., Numerical
lubrication, solid film lubrication, boundary Methods in Engineering, Prentice Hall, 1961.
lubrication, effectiveness of liquid lubricant and solid 5. Singiresu S. Rao, Applied Numerical Methods for
lubricant. Engineers and Scientists, Prentice Hall, Inc., 2002.

References:
1. Rabinowicz E., Friction and Wear of Materials, MIE 4449: WIND ENERGY TECHNOLOGY
2nd edition, John Wiley & Sons, Inc., 2013. [3 0 0 3]
2. Bharat Bhushan, Principles and applications of
Tribology, 2nd edition, John Wiley & Sons Inc., Introduction: Wind resources and modern wind
2013. turbines, classification of wind turbines and turbine
3. Arnell R. D., Davies P. B., Halling J. & Whomes components, materials and technology advancements,
T. L., Tribology: Principles and design applications of wind turbines, grid connectivity,
applications, Palgrave Macmillan, 1991. industries, standalone systems, offshore power. Wind
resource assessment: variations of space, time, season,
months, and diurnal, characteristics of steady wind and
wind speed distribution. Wind measurement: References:
parameters, types of anemometers, monitoring station,
1. Fung Y. C., Biomechanics: motion, flow, stress,
remote wind speed sensing instrumentation. Design of
and growth, Springer Science & Business Media,
wind turbines: Rotor torque and power, braking, blade
2013.
design and blade materials, blade section, Performance
2. Oomens C., Brekelmans M., Loerakker S., and
measurement. Subsystems of wind turbines: Different
Baaijens F., Biomechanics: concepts and
types of generators, wind power control systems,
computation, Cambridge University Press, 2018.
asynchronous load management using pumps, paddle
3. Ethier C. R., and Simmons C. A., Introductory
wheels, and batteries. Wind Farms: Wind flow models,
biomechanics: from cells to organisms, Cambridge
wind farm design using capacity factor, siting and
University Press, 2007.
layout of wind turbines, site selection, micrositing, and
4. Bartlett R., Introduction to sports biomechanics:
wake model. Economics of wind energy conversion:
Analysing human movement patterns, Routledge,
annual energy output, capital recovery factor,
2014.
depreciation, cost of wind energy, wind generated
5. Hirasawa Y., Sledge C. B., and Woo S. L., Clinical
electricity value, present value of annual costs.
biomechanics and related research, Springer
References: Science & Business Media, 2012.
1. Mathew Sathyajith, Wind Energy: Fundamentals,
Resource Analysis and Economics, Springer,
MIE 4451: NON-DESTRUCTIVE TESTING OF
2006. MATERIALS [3 0 0 3]
2. Johnson Garg L., Wind Energy Systems, Prentice
Hall, Inc., 2006. Fundamentals of Non-Destructive Testing (NDT),
3. Ahmed Siraj, Wind Energy – Theory and Practice, Comparison of NDT vs destructive testing, Mechanical
3rd ed., PHI Learning Pvt. Ltd., 2015. testing, Terminologies used, flaws and defects in NDT,
Advantages, limitations, scope, and applications of
NDT, Working principle, parameters affecting, testing
MIE 4450: BIOMECHANICS [3 0 0 3] methods, testing procedures adopted, sensitivity,
standards applied, advantages, disadvantages and
Introduction to Biomechanics: Brief history,
applications of Penetrant Inspection (PI) methods,
Contributions of Biomechanics to health science,
Magnetic Particle Testing (MPT), Ultrasonic Testing
Contributions of Biomechanics to the field of
(UT), Holography (HG), Radiographic Techniques
Mechanics, Hemodynamics: Rheology of blood, Large
(RGT), Eddy Current Testing (ECT), Acoustic
artery hemodynamics, Small artery hemodynamic,
Emission Testing (AET) and Thermography (TG)
Sports biomechanics : Movement patterns – the
method of non-destructive testing.
essence of sports biomechanics, Qualitative and
quantitative analysis of sports movements, forces and References:
torques, The anatomy of human movement, 1. Don E. B. and Roderic K. S., Non-destructive
Biomechanics of respiratory system : Gross anatomy of Evaluation: A tool in design, manufacturing and
the conducting airways and pulmonary vasculature, service, Taylor and Francis Group, 1997.
Anatomy of associated structures, Biomechanics of 2. Paul E. M., Introduction to Non-destructive
breathing, Mass transfer and particle transport in lungs, Testing-A training Guide, 2nd ed., John Wiley and
Skeletal biomechanics: Introduction to bone, Sons, Inc, 2005.
Biomechanics of cortical and trabecular bone, Fracture 3. NDT Hand Books Vol. 1 – 10, American Society
and failure mechanics, Mechanobiology, Structure of for Non-destructive Testing (ASNT), 1999.
ligament, tendon and cartilage and its biomechanics, 4. Davis J. R., ASM Handbook: Volume 17, Non-
Terrestrial locomotion : Jumping, Description of destructive Evaluation and Quality Control, 2nd
walking and running, Gait analysis, Biomechanics of ed., ASM International Materials Park, 1992.
Cardiovascular system: Biomechanical hierarchy in 5. ASNT (Edited), Materials and Processes for NDT
cardiovascular physiology, Structure-function Technology, ASNT, USA, 1981.
relationship in cardiovascular tissues, Biomechanical 6. Ensminger D., Ultrasonics: Fundamentals,
feedback in the cardiovascular system, Experimental Technology, Application, 2nd ed., Marcel Dekker,
and computational methods. New York, 1988.
7. Annual Book of ASTM Standards. Metals Test
Methods and Analytical Procedures: Non-
 destructive Testing, section 3, v03.03, American MIE 4453: ENERGY AUDIT, CONSERVATION
Society for Testing and Materials, 1989. AND STORAGE [3 0 0 3]
8. Shull P. J., Non-destructive Evaluation – Theory, Energy management and Audit: Energy management
Applications, and Applications, Marcel Dekker, principles, action plan, audit methodologies, audit
2002. instruments. Energy conservation and performance
assessment: Critical thickness and economical
thickness of insulation, power factor improvement
MIE 4452: PROJECT MANAGEMENT [3 0 0 3]
methods, electrical lighting and energy conservation
Concept of project, Importance of project management, methods. Waste heat recovery devices and
Project life cycle, Project management as an integrated cogeneration: Waste heat recovery devices,
approach, organizing projects within the functional cogeneration principles, methods, types and
organization, organizing projects as dedicated teams, performance evaluation of cogeneration system.
Organizing projects within a matrix arrangement, Performance assessment of mechanical systems:
Project manager and their attributes. Feasibility study: Performance evaluation of different systems, energy
Pre-feasibility study, Technical feasibility, Managerial conservation measures, case studies. Need of energy
feasibility, Economic feasibility, Financial feasibility, storage: Introduction and different modes of energy
Cultural feasibility, Political feasibility, Environmental storage. Potential energy: Pumped hydro storage,
feasibility, Market feasibility, Steps of feasibility flywheel storage, compressed air energy storage,
study. Estimating project times and costs: Factors electrical and magnetic energy storage, chemical
influencing the quality of estimates, Costs associated energy storage, thermo-chemical, photo-chemical, bio-
with projects, Estimating guidelines for times, costs chemical, electro-chemical, hydrogen for energy
and resources, Top-down approaches of estimation, storage, solar Ponds for energy storage. Sensible and
Bottom-up approaches of estimation, Hybrid approach Latent Heat Storage: Stratified storage systems, rock-
of estimation. Risk management process: Risk bed storage systems, phase change materials, selection
identification, Risk Assessment - probability analysis, criteria, numerical heat transfer in melting and freezing
mitigating risk, avoiding risk, transferring risk, sharing process.
risk, Retaining risk, Contingency planning,
References:
Contingency funding and time buffers, Risk response
control – change control management, Decision tree 1. Turner W. C., Energy management Handbook, 8 th
analysis, Numerical. Project scheduling: Bar charts ed., Fairmont Press, 2012.
and Milestone charts, Elements of network, 2. BEE (Bureau of energy efficiency) Study Material,
Development of networks, Work Breakdown Structure Energy Management & Energy Audit, www.bee-
(WBS), Critical Path Method, Program Evaluation and india.com
Review Technique, Network crashing, CPM updating, 3. Dinçer Ibrahim and Rosen Marc A., Thermal
Numerical. Project audit and closure: Guidelines for Energy Storage: Systems and Applications, 3rd ed.,
conducting a project audit, Initiating and staffing, Data Wiley–Blackwell, 2021.
collection and Analysis, Audit reporting, Conditions
for project closure, Evaluation of project team and
members. MIE 4454: AUTOMATIC CONTROL
ENGINEERING [3 0 0 3]
References:
Simple open and closed loop systems, concept of
1. Gray C., Larson E. and Desai G., Project feedback, block diagrams, transfer functions.
Management – The Managerial Process, Tata Representation of Control Components and Systems
McGraw Hill Pvt. Ltd., New Delhi, 2013. Representation, differential equations for mechanical
2. Paneerselvam R. and Senthilkumar P., Project systems, electrical systems, hydraulic systems and
Management, PHI Learning Pvt. Ltd., New Delhi, thermal systems, Integrating devices, hydraulic
2010. servomotor, temperature control
system, speed control system. Block representation of
3. Meredith J. and Mantel S., Project Management –
system elements, Block diagram Reduction, Signal
A Managerial Approach, John Wiley & Sons,
Flow Analysis. Damping ratio and natural frequency,
USA, 2012. First order and second order system response to various
4. Vohra N. D., Quantitative Techniques in input, Modes of control, characteristics of various
Management, New Delhi, 2007. controllers. System type numbers and steady-state
error, System stability criteria, stability of control
system using Routh criteria. Polar and rectangular plots
for the frequency response, System analysis using polar 4. Goetsch D. L., Occupational Safety and Health for
plots (Nyquist criterion). System analysis using Technologists, Engineers and Managers, 8th ed.,
logarithmic plots: Bode diagrams: Stability analysis Pearson Education Limited, 2014.
using Bode diagrams, System analysis using root locus
plots: System compensation: Series and feedback
compensation physical devices for system OPEN ELECTIVES
compensation. Digital computer control: Concepts and
control configurations. State space analysis of control MIE 4311: INTRODUCTION TO COMPOSITE
systems Analysis of systems, Concept of state, state MATERIALS [3 0 0 3]
variable and state model, state model of linear systems, Definition, Classification, Types of matrices &
Eigen Values, Transfer function derivation from the reinforcements, Characteristics & selection of Fiber,
state model, Solution of time invariant state equation.
Laminated & Particulate composites, Prepregs, Micro
References: mechanical analysis of a lamina, Rule of mixture,
1. Norman S. Nise, Control Systems Engineering, Processing of composites, Hand-layup, Spray-layup,
Wiley India, 2015. Compression molding Injection molding, Reaction
2. Katsuhiko Ogata, Modern Control Engineering, injection molding, Autoclaving, Resin transfer
Prentice Hall, India, 2010. molding, Filament winding, Pultrusion, Sheet molding,
3. Kuo B. C. and Golnarghi F., Automatic Control Secondary processing of polymer composites: Joining,
Systems, Wiley, India, 2009. Adhesive joining, Mechanical joining, Microwave
4. César Pérez López, MATLAB Control Systems joining, Induction and resistance welding, Drilling of
Engineering, Springer, Apress Academic, 2014. polymer composites, Testing of polymer composites,
5. Harrison H. L. and Bollinger J. G., Automatic ASTM standards test for physical properties,
controls, 2nd ed., International Text Book Co. mechanical properties, SEM analysis, Application
U.S.A, 1969. developments, Aircrafts, Missiles, Space, Automobile,
6. Nagarth I. J. and Gopal M., A text book of control Electrical and electronics, Marine, Recreational, sports
system engineering, New age International equipment, and Construction.
Publishers, 2021. References:
1. Autar K. K., Mechanics of Composite Materials,
MIE 4455: INDUSTRIAL SAFETY CRC Press, 2005.
ENGINEERING [3 0 0 3] 2. Krishan K. C., Composite Material Science and
Engineering, 4th ed., Springer Publication, 2021.
Introduction to Safety Engineering, Industrial 3. Mallik P. C., Fiber Reinforced Composites,
Accidents, Theories of Accident Causation, Marcel Decker Publication, 1993.
Introduction to Health and Toxic Substances, 4. Rober M. J., Mechanics of Composite Materials,
Environmental Control and Noise, Ventilation and its McGraw Hill Kogakusha Ltd, 2008.
Design Principle, Personal Protection and First Aid, 5. Michael W.. Hyer, Stress analysis of fiber
Fire Protection, Machine Guarding, Safeguarding the Reinforced Composite Materials, McGraw Hill
point of operation, Power presses, Grinding machines, Publication, 1998.
Saws, Belts and Pulleys, Safety consideration 6. Gupta M. C., Gupta A. P., Polymer Composites,
regarding material handling and storage. Safety New age international (P) Ltd, 2005.
Requirement for Material Handling and Storage,
Electrical Hazards, Employee Participation in
Promoting Safety, Safety Training, Safety Committees, MIE 4312: INRODUCTION TO
Teamwork Approach to Promoting Safety. BIOMECHANICS [3 0 0 3]
References: Introduction to Biomechanics: Brief history,
1. Asfahl C. R. and Rieske D. W., Industrial Safety Contributions of Biomechanics to health science,
and Health Management, 6th ed., Pearson Contributions of Biomechanics to the field of
Education, 2011. Mechanics Hemodynamics: Rheology of blood, Large
2. Spellman F. R. and Whiting N. E., The Handbook artery hemodynamics, Small artery hemodynamics,
of Safety Engineering: Principles and Ocular biomechanics: Ocular anatomy, Biomechanics
Applications, Government Institutes, 2009. of glaucoma, Ocular blood , Biomechanics of
3. Gupta A., Industrial Safety and Environment, 1 st respiratory system: Gross anatomy of the conducting
ed., Laxmi Publications Pvt. Ltd., 2006 airways and pulmonary vasculature, Anatomy of
associated structures, Biomechanics of breathing, Mass (N/FIFO). Critical Path Method (CPM). Project
transfer and particle transport in lungs, Skeletal Evaluation and Review Technique (PERT).
biomechanics: Introduction to bone, Biomechanics of
References:
cortical and trabecular bone, Structure of ligament,
tendon and cartilage and its biomechanics, 1. Taha H. A., Operations Research, Pearson
Biomechanics of Cardiovascular system, Education, 7th ed., 2002.
Biomechanical hierarchy in cardiovascular physiology, 2. Winston W. L., Operations Research, Thomson
Structure-function relationship in cardiovascular Asia, 2003.
tissues, Biomechanical feedback in the cardiovascular 3. Vohra N. D., Quantitative Techniques in
system, Experimental and computational methods. Management, New Delhi, 2007.
4. Sharma S. D., Operations Research, Kedar Nath
References:
Ramnath Publications, 14th ed., 2005
1. Fung Y. C., Biomechanics: motion, flow, stress,
and growth, Springer Science & Business Media,
MIE 4314: ENERGY ENGINEERING [3 0 0 3]
2013.
2. Oomens C., Brekelmans M., Loerakker S., and Steam power plant: Different types of fuels used for
Baaijens F., Biomechanics: concepts and steam generation, equipment for burning coal in lump
computation, Cambridge University Press, 2018. form, oil burners, advantages and disadvantages of
3. Ethier C. R., and Simmons C. A., Introductory using pulverized fuel, pulverized fuel furnaces, coal
biomechanics: from cells to organisms, Cambridge and ash handling, high and super critical pressures.
University Press, 2007. Diesel engine power plant: Applications of diesel
4. Hirasawa Y., Sledge C. B., and Woo S. L., Clinical engines in power field, method of starting diesel
biomechanics and related research, Springer engine, auxiliaries, layout of diesel power plant.
Science & Business Media, 2012. Hydro–electric plant: hydrographs, flow duration and
5. Brandao S., Da Roza T., Mascarenhas T., Duarte mass curves, unit hydrograph and numerical, different
S., Ramos I., Parente M., and Natal Jr., Applied types of plants, accessories, general layout of hydel
Biomechanics: Concepts and Connections Applied power plants. Nuclear power plant: Principles of
Biomechanics: Concepts and Connections, release of nuclear energy, nuclear fuels used in the
International journal of urology, 2013. reactors, elements of nuclear reactor, reactor types,
radiation hazards, shielding’s, and radioactive waste
disposal. Solar energy: Solar extra-terrestrial radiation
MIE 4313: INTRODUCTION TO OPERATIONS and radiation at the earth surface, radiation measuring
RESEARCH [3 0 0 3] instruments, solar energy conversion systems. Biomass
Introduction: Definition, Phases, Applications, energy: Photosynthesis, anaerobic fermentation,
Advantages and Limitations of Operations Research. classification, gasifiers. Wind energy: Properties of
Linear programming problems: Assumptions, wind, wind velocity and power from wind, types of
Formulation of LPP for business and non -business wind machines and their characteristics. Other energy
applications. Graphical solutions, Special cases – conversion techniques: Fundamental characteristics of
Degeneracy, Infeasible Solution, Unbalanced and tidal power, harnessing tidal energy and limitations.
Multiple optimal solutions. Minimization and principle of working of ocean thermal energy, Rankine
Maximization cases. Simplex algorithm, Concept of cycle, limitations of OTEC. geothermal energy
dual. Transportation problem: Formulation, generating conversion working principle, types of geothermal
initial solutions using North-West Corner (NWC) stations, limitations.
Method, Least Cost (LC) Method, Vogel’s References:
Approximation Method (VAM). MODI Method.
1. Nag P. K., Power Plant Engineering, 3rd ed., Tata
Assignment problem, Travelling salesman problem.
McGraw Hill, 2011.
Game theory: Introduction to game theory, Two-
2. Domkundwar, Power Plant Engineering, 8th ed.,
person-zero sum games, Pure and Mixed Strategies,
Dhanpat Rai Publications, 2016.
Solution methods for 2 x 2 games, Graphical method
3. Rai G. D., Non-Conventional Energy Sources,
(2 x n games; m x 2 games), Queueing theory:
Khanna Publishers.
Introduction to queueing theory, Poisson arrival rate
4. Rao S., and Parulekar B. B., Energy Technology,
and Exponential service times, System characteristics,
Khanna Publishers, 2009.
Problems on the models- (M/M/1) :( /FIFO), (M/M/1):
5. Culp A. W., Principles of Energy Conversion, solutions for bio-fluid problems - Shear stress on
McGraw Hill International, 2001. arterial endothelial cells, NS in a pipe - Validity of the
Hagen-Poisseuille relationship in the cardiovascular
system, Pulsatile flow, Effect of pulsatility,
MIE 4315: INTRODUCTION TO FINITE Wormersley solution, Computational fluid dynamics
ELEMENT METHODS [3 0 0 3] (CFD) and Flow measurement in the cardiovascular:
Basics Concepts of FEA: General steps involved in Computational fluid dynamics, Flow measurement in
FEM, Convergence requirements, Pascal’s triangle, the cardiovascular, Flow over immersed body
Higher order quadratic elements; Local and Global (incompressible): General flow characteristics, Lift
coordinate systems, Shape Functions and properties. and drag concepts – Definitions, Drag for different
Basics of theory of Elasticity. Finite Element shapes, Drag coefficient, for a sphere in stokes flow,
Formulation by DSM: FE formulation of 1D linear Transport of micro-particles, Characteristic flow past
element by direct stiffness method, Elimination and an object, Boundary layer characteristics - Boundary
Penalty approach. Application to bar and plane truss Layer Structure and Thickness on a Flat Plate,
problems. Introduction to space truss. FE formulation Boundary layer thickness, MomentumIntegral
of Beam element by energy approach, Application to Boundary Layer Equation for a Flat Plate,
Beam problems. Additional Methods and Applications Prandtl/Blasius Boundary Layer Solution, Turbulent
of FEM: Structure of commercial FEM software boundary layer, Pressure gradient effect on flow -
package, Mini project on using FEA software, Mini Separation point, Reduction of drag, Biological
Project on using computation approach. solution for drag reduction, Rheology of blood, Non-
Newtonian fluid: Viscosimetry, Blood composition
References: and viscosity, Cell free marginal layer, Pressure flow
1. Chandrupatla T. R., and Belegundu A. D., relationship for non-Newtonian fluid, Hemodialysis
Introduction to Finite Elements in Engineering, and platelet activation, Time effect viscosity,
Pearson Education, New York, 2011. Introduction to Fluid Machinery and biomedical
2. Logan Daryl L., A First course in Finite Element application: Introduction to Fluid Machinery, Fluid
Method, 5th ed., Cengage Publishing, India, 2012. machinery in biomedical.
3. Hutton David V., Fundamentals of Finite Element References:
Analysis, Tata McGraw Hill, India, 2005.
4. Reddy J. N., An Introduction to Finite Element 1. Rittgers Stanley E., Chandran Krishnan B., and
Method, 4th ed., McGraw Hill International Yoganathan Ajit Prithiviraj, Biofluid mechanics:
Edition, New York, 2020. the human circulation, Taylor and Francis. 2nd ed.,
5. Bathe K. J., Finite Element Procedures, Prentice- 2012.
Hall of India, New Delhi, India, 1996. 2. Kundu P. K., Cohen I. M., and Dowling D. R.,
6. Rao S. S., Finite Element Analysis, 6th ed., Elsevier Fluid Mechanics, 5th ed., Academic Press, 2011.
Butterworth-Heinemann, India, 2017. 3. Waite L., Applied Biofluid Mechanics, 1st ed.,
7. Zienkiewicz O. C., and Cheung Y. K., The Finite McGraw-Hill Professional, 2007.
Element Method in Structural and Solid 4. Truskey George A., Yuan Fan, and Katz David F.,
Mechanics, 7th ed., Elsevier Butterworth- Transport Phenomena in Biological Systems
Heinemann, India, 2013. (Pearson Prentice Hall Bioengineering), 2009.

MIE 4316: BIO-FLUID DYNAMICS [3 0 0 3] MINOR SPECIALIZATION: MACHINE

DESIGN
Cardiovascular physiology: Cardiovascular system,
The heart-blood vessels, Mechanical model (Winkessel MIE 4401: DESIGN OF MECHANICAL
model), Blood, Fundamentals of fluid mechanics: SYSTEMS [3 0 0 3]
Intrinsic properties of fluid, Conservation laws- Definition of engineering design, Steps of the design
Mathematical tools, Mass Conservation, Conservation process, General consideration in machine design,
of momentum, Form of fluid motions equations, Design of Piston, Design of Connecting rod, Design of
Dimensional analysis, Energy conservations & Bio- Crankshaft, Design of Valve gear mechanism, Flange
heat Equation of Mammalian Tissue, Mathematical coupling, Screw jack, Single plate clutch, Two-speed
solutions for bio-fluid problems: How to solve a gearbox, Passenger lift, Concrete mixer, Automobile
problem?, Boundary conditions, Mathematical
chassis & suspension, Johnson’s method of 4. Holzapfel G. A., Nonlinear Solid Mechanics: A
optimization. Continuum Approach for Engineering, John Wiley
& Sons, 2000.
References:
5. Nair S., Introduction to Continuum Mechanics,
1. Bhandari V. B., Design of Machine Elements, Tata Cambridge University Press, 2009.
McGraw Hill Publishing Company, 5th ed., New 6. Reddy J., An Introduction to Continuum
Delhi, 2020. Mechanics, 2nd ed., Cambridge University Press,
2. Trikha S. N., Machine Design Exercises, Khanna 2013.
Publishers, 4th ed., Delhi, 1966. 7. Spencer A. J. M., Continuum Mechanics, Dover
3. Patil S. P., Mechanical System Design, Jaico Publications, 2012.
Publishing House, Mumbai, 2004.
4. Dieter George E., Engineering Design, McGraw
Hill Book Co., Singapore, 2009. MIE 4403: LUBRICATION AND ROTOR
5. Ulrich Karl T., and Eppinger Steven D., Product DYNAMICS [3 0 0 3]
Design and Development, Irwin McGrawHill, Introduction: Rotating machinery. Lubrication:
Boston, 2016. Properties and testing of lubricants. Bearing Systems:
6. Ullman David G., The Mechanical Design Rolling element bearings, Hydrodynamic oil-journal
Process, McGraw Hill Book Co., Singapore, 2010. bearings, Gas lubricated bearings, Hydrostatic bearings
7. Bralla James G., Design for Manufacturability and Squeeze film bearings. Rotor Dynamics: Simple
Handbook, McGraw Hill, New York, 1998. rotor systems, Simple rotor-bearing foundation
8. Mahadevan K., and Reddy Balaveera K., Design systems, Simple rotor systems with gyroscopic effect,
Data Handbook, CBS Publishers and Distributors, Torsional vibrations of rotors, Continuous systems and
New Delhi, 2020. FE methods: Transfer matrix method and FE method.
Transverse vibration analysis of simple rotors.
Instability in rotating machines, Instability of multi-
MIE 4402: INTRODUCTION TO CONTINUUM
degrees of freedom rotor mounted on flexible bearings.
MECHANICS FOR ENGINEERS [3 0 0 3]
References:
Introduction and Mathematical Preliminaries: Solids
and fluids as continuous media, Tensors, Dummy 1. Bhushan Bharat, Principles and Applications of
indices, Kronecker delta, Index notation, Tensor Tribology, Wiley, 2nd ed., 2013.
algebra, Divergence and Curl Theorems. Kinematics of 2. Majumdar B. C., Sarangi Mihir, and Ghosh M. K.,
Continua: Bodies, configurations, and motions, Theory of Lubrication, Tata McGraw Hill, 2013.
Deformation gradient tensor, Strain measures, Strain- 3. Gwidon W. Stachowiak, Andrew W. Batchelor,
Rate Tensor, Spin, Infinitesimal Deformation. The Engineering Tribology, 4th ed., Butterworth
Balance Laws, Stress Tensors: Transformation of Heinemann, London, 2016.
stress tensors under the rotation of axes, Plane stress, 4. Rao J. S., Rotor Dynamics, 3rd ed., New Age
Deviatoric stress, von-Mises stress. Isothermal Solid International (P) Ltd., New Delhi, 2018.
Mechanics: Elasticity equations, Initial and boundary 5. Chong-Won Lee, Vibration Analysis of Rotors,
value problems, Virtual work theorem, Uniqueness and Springer Science Business Media, 2012.
reciprocal theorem, Constitutive relations for linearly 6. Krzysztof Czolczynski, Rotordynamics of Gas-
and nonlinearly elastic solids. Isothermal Fluid Lubricated Journal Bearing Systems, Springer,
Mechanics: Ideal fluids, Newtonian viscous fluids, 2012.
Incompressible case, Naiver stokes equations, 7. Friswell M. I., Dynamics of Rotating Machines,
Applications to fluid mechanics problems. Cambridge, 2010.
References:
1. Batra R. C., Elements of Continuum Mechanics, MIE 4404: MODELING AND SIMULATION OF
American Institute of Aeronautics and DYNAMIC SYSTEMS [3 0 0 3]
Astronautics, 2006. Introduction to Modeling and Simulation: Importance
2. Chaves E. W. V., Notes on Continuum Mechanics, of Modeling, Models of Systems, Systems,
Springer Science & Business Media, 2013. Subsystems, and Components. Bond Graph Modeling
3. Gonzalez O., and Stuart A. M., A First Course in of Dynamic Systems: Engineering Ports, Bonds, and
Continuum Mechanics, Cambridge University Power, Bond Graphs, Inputs, Outputs, and Signals,
Press, 2008. Basic Bond Graph Elements, Causality considerations
for the basic Elements. Basic System Models: Prototyping to Direct Digital Manufacturing, 2 nd
Mechanical systems involving translation, rotation, ed., Springer Pub., 2015.
Hydraulic systems. Acoustic systems and Electrical 2. Gebhardt Andreas, Understanding Additive
systems. System Models of Combined Systems: Multi Manufacturing, Hanser Publishers, 2011.
Energy Domain systems, Transducers, Transformers, 3. Hopkinson N., Hague R. J. M., and Dickens P. M.,
Gyrators, Thermo-fluid system, Mechatronic system, Rapid Manufacturing - An Industrial Revolution
Multibody systems. State-Space Equations and for the Digital Age, John Wiley & Sons, Ltd, 2005.
Automated Simulation: Standard form for System 4. Advanced Additive Manufacturing- Handbook,
equations, Basic formulation and reduction. Analysis INEX-ADAM, 2020.
and Control of Linear Systems: Solution techniques for
ordinary differential equations, free response and
Eigen values for undamped and damped oscillator. MIE 4406: NON-TRADITIONAL MACHINING
TECHNIQUES [3 0 0 3]
References:
Classification & selection of Non-traditional
1. Karnopp Dean C., Margolis Donald L., and machining process, Need for NTM, Comparison with
Rosenberg Ronald C., System Dynamics: traditional machining, Process, Equipment, Working
Modeling, Simulation, and Control of Mechatronic principle, Advantages, Limitations & Process
Systems, John Wiley & Sons, Inc. 5th ed., 2012. parameters of Ultrasonic machining, Abrasive jet
2. Mukherjee A., Karmakar R., and Samantaray A. machining, water jet machining, Electrochemical
K., Bond graph in modeling, simulation and fault machining, Electrochemical grinding, Electrochemical
identification, IK International, New Delhi, 2006. honing, Chemical machining, Chemical blanking,
3. Das Shuvra, Mechatronic Modeling and Chemical milling, Electric discharge machining,
Simulation Using Bond Graphs, CRC Press, 2009. Electric discharge grinding, Wire EDM, Plasma arc
4. Borutzky Wolfgang, Bond Graph Methodology machining, Laser beam machining and Electron beam
Development and Analysis of Multidisciplinary machining.
Dynamic System Models, Springer, 2010.
5. Thoma Jean U., Simulation by Bondgraphs, References:
Springer, 1990. 1. Production technology, HMT, McGraw Hill
Education India Pvt. Ltd, 2001.
2. Vijay K. Jain, Advanced Machining Processes, 1st
MINOR SPECIALIZATION: ed., Allied Publishers Pvt. Ltd., 2013.
MANUFACTURING TECHNOLOGY 3. Pandey P. C., and Shah H. S., Modern Machining
MIE 4405: ADDITIVE MANUFACTURING Processes, 1st ed., Tata McGraw-Hill Educational
India Pvt. Ltd., 2013.
[3 0 0 3]
4. Bhattacharyya Amitabha, New Technology, The
Basic principles, Advantages, limitations and Institute of Engineers (India), 2000.
applications of Additive Manufacturing (AM), 5. Elanchezhian C., Vijaya Ramnath B., and Vijayan
Standardizations in AM, Contrast with conventional M., Unconventional Machining processes, 1st ed.,
manufacturing processes, Classification, Detailed Anuradha Publication, 2005.
working principle, Equipment, process and techniques, 6. Singh M. K., Unconventional Machining
Process parameters in AM, General process workflow processes, 1st ed., New Age International
in AM, Pre-processing for AM, Role of CAD in AM, Publishers, 2010.
Part placement in machine envelop and slicing, Build 7. Benedict. G.F., Nontraditional Manufacturing
process, Post processing, Role of materials in AM, Processes, Marcel Dekker Inc., 1987.
Properties, Specifications and development of 8. Paul De Garmo, Black J. T., and Kohser Ronald.
materials for AM, Materials Issues in AM, Design for A., Material and Processes in Manufacturing, 8 th
AM, Impact of AM on conventional DFM and DFA, ed., Prentice Hall of India Pvt. Ltd., 2001.
Design guidelines for AM, Management and
Implementation of AM, Case studies.
MIE 4407: LEAN MANUFACTURING [3 0 0 3]
References:
Definition and basic concepts of lean manufacturing
1. Gibson Ian, Rosen David W., and Stucker Brent,
philosophy, 5S principle, Total productive
Additive Manufacturing Technologies: Rapid
maintenance, Process mapping techniques, Concept of
work cell, Cause and effect diagram, Pareto chart, 7. Davim J. P., and Jackson M. J., Nano and
Spider/radar chart, Poke Yoke, Kanban, Micromachining, John Wiley & Sons, 2013.
Autonomation, SMED, Standardized fixtures, DFMA,
JIT concept, Visual workplace, Lean implementation
and productivity improvement. MINOR SPECIALIZATION: THERMAL
ENGINEERING
References:
MIE 4409: CRYOGENICS [3 0 0 3]
1. Gopalakrishnan N., Simplified Lean Manufacture,
India: Prentice-Hall of India Pvt. Limited, 2010. Introduction to cryogenics: Properties of cryogenic
2. Socconini L., Lean Manufacturing. Step by step, fluids, material properties at cryogenic temperatures
Spain: ICG Marge, SL, 2021. mechanical properties, thermal properties, electrical
3. Shook J., and Rother, M., Learning to See: Value properties, Carnot liquefaction cycle, F.O.M. and yield
Stream Mapping to Add Value and Eliminate of liquefaction, cycles, inversion curve, Joule Thomson
Muda, Germany: Taylor & Francis, 2003. effect, areas of applications of cryogenic Engineering.
Gas Liquefaction Systems: Simple Linde Hampson
system, pre cooled Linde Hampson System, Claude
MIE 4408: MICRO MACHINING [3 0 0 3] System, Heylndt system, dual pressure, Claude system,
Introduction to micro machining, Need for liquefaction cycle, kapitza system and comparison,
miniaturization, Classification of micro machining, liquefaction cycle for hydrogen and helium system,
Applications of micro machining, MEMS vs micro critical components of liquefaction systems. Gas cycle
machining, Machine tools for micro machining, Micro cryogenic refrigeration systems: Classification of cryo-
cutting tools, Sensors and actuators for monitoring and coolers, Stirling cycle, cryo – refrigerators, ideal cycle
control of micro machining, Theory of micro working principle. Schmidt’s analysis of Stirling cycle,
machining, Diamond turning, Micro machining various configurations of Stirling cycle refrigerators,
operations, Abrasive jet micro machining, Abrasive Gifford Mcmahon cryo- refrigerator, Pulse tube
water jet micro machining, Ultrasonic micro refrigerator, Cryogenic regenerators. Gas Separation
machining, Abrasive flow finishing, Magnetic abrasive and gas Purification Systems: Thermodynamic ideal
finishing, Magneto rheological finishing, Magneto separation system, properties of mixtures, principles of
rheological abrasive flow finishing, Electric discharge gas separation, Linde single column air separation.
micro machining, Wire electric discharge micro Linde double column air separation and adsorption
machining, Electric discharge grinding, Electric Process. Vacuum Technology: Mechanical pumps,
discharge diamond grinding, Laser beam micro diffusion pumps, cryo-pumping, cryogenic insulation,
machining, Electron beam micro machining, Ion beam evacuated porous insulation powder and fibers, gas
micro machining, Chemical micro machining, Electro filled powders and fibrous materials multilayer super-
chemical micro machining, Electro chemical micro insulation, composite insulation.
grinding, Electro-chemical honing, Electro stream References:
micro drilling, Electro chemical micro deburring,
1. Barron Randal F., Cryogenic Systems, Oxford
Shaped tube electrolytic micro machining.
University Press, New York, 1999.
References: 2. Flynn T. M., Cryogenic Engineering, 2nd ed.,
1. V. K. Jain, Micro Manufacturing Processes, CRC Maxwell Dekker, 2005.
Press, Taylor & Francis Group, 2012. 3. Timmerhaus K. D. and Flynn T. M., Cryogenic
2. K. Cheng K., and Huo D., Micro-cutting: Process Engineering, Plenum Press, 2013.
Fundamentals and Applications, John Wiley & 4. Timmerhaus Klaus D., Reed Richard Palmer,
Sons, 2013. Cryogenic Engineering: 50 years of progress,
3. Jain V. K., Advanced Machining Processes, Allied Springer, 2007.
Publishers Pvt. Ltd., 2007.
4. Mishra P. K., Nonconventional Machining, Narosa
MIE 4410: SOLAR THERMAL SYSTEMS
Publishing House Pvt. Ltd, 2007.
5. McGeough J, A., Advanced Methods of [3 0 0 3]
Machining, Springer, 2011. Introduction: World energy scenario, solar radiation
6. Qin Y., Micro-manufacturing Engineering and geometry, radiation measurement, empirical equations,
Technology, William Andrew, 2015. radiation on tilted surfaces, incident angle. Liquid
Collectors: Construction and working of flat plate
collector, thermal analysis of absorber plate, H-W-B psychrometry, energy balance, design and analysis.
equation, effect of various parameters, ASHRAE test Testing of Heat Exchangers: Procedure for different
standard and procedure, uncertainty analysis, working heat exchangers, performance evaluation.
of evacuated tube collector, advantages, PV/T system
References:
analysis. Air heaters: Performance analysis of
conventional air heater, absorber plate treatment, novel 1. Kakac Sadik, Heat exchangers: Selection, rating,
designs, testing procedure and performance curves, and thermal design, 3rd ed., CRC Press, 2012.
cabinet drier. Concentrating Collectors: 2. Serth Robert W., Process Heat Transfer:
Thermodynamic and optical limit to concentration, Principles, Applications and Rules of Thumb,
cylindrical parabolic system (PTC), construction, Academic Press, 2014.
losses, thermal analysis of PTC, tracking, compound 3. Kern Donald Q, Process heat transfer, McGraw
parabolic collector, performance analysis, paraboloid Hill Publication, 1997.
dish collector, thermal analysis, central receiver tower 4. Kays W. M., and London A. L., Compact Heat
system, power cycles, fresnel lens. Other Systems: Exchangers, McGraw-Hill, 1998.
Solar cooker, desalination, solar pond, solar 5. Shah Ramesh K., Fundamentals of heat exchanger
refrigeration, green building. energy Storage: need for design, 1st ed., John Wiley and sons, 2003.
energy storage, sensible and latent heat storage, liquid
storage tank analysis.
MIE 4412: JET PROPULSION [3 0 0 3]
References:
Introduction to aircraft propulsion: Jet engine
1. Goswami D. Yogi, Principles of solar engineering, performance parameters; Thrust, SFC, efficiencies,
CRC Press, 2015. single and multispool gas turbine based propulsive
2. Kalogirou Soteris A., Solar Energy Engineering, devices. Real cycle thermodynamic analysis: Ideal and
Academic Press, 2014. real Brayton cycles, Jet engine cycles for aircraft
3. Tiwari G. N., Solar Energy, Narosa Publications, propulsion. cycle components and component
2014. performance, analysis of engine real cycles.
4. Sukhatme S. P., and Nayak J. K., Solar Energy, Fundamentals of rotating components:
Tata McGraw Hill, 2012. Thermodynamics of compressors and turbines,
development of parameters for compressor and
turbines. Compressors and turbines: Loss and blade
MIE 4411: DESIGN OF HEAT EXCHANGERS
performance estimation, single and multistage axial
[3 0 0 3]
compressor characteristics, elements of centrifugal
Introduction: Classification of heat exchanger, design compressor, concept of rothalpy, centrifugal
methods, convection correlations, overall heat transfer compressor characteristics, surging and choking.
coefficient, thermal network, fouling resistance, Combustion systems: Combustion mechanism and
pressure drop due to fouling, general design procedure. important combustion parameters, combustion
Double pipe heat exchangers: Working, classification, efficiency, combustion intensity, fuels and their
applications, need for parallel-series flow, thermal and properties, fuel injection systems. Intakes and
hydraulic analysis, bare and finned tube analysis. Shell propelling nozzles: Requirements of an intake, aircraft
and Tube Heat Exchangers: Types, basic components, intake design considerations, propelling nozzles,
layout and geometry, applications, stream allocation, energy conversion in a nozzle, nozzle design
design procedure, TEMA Standard, Kern and Bell- considerations. Engine installed performance, sizing
Delaware method. Compact Heat Exchangers: and matching: Installed performance of engine,
Different designs, design procedure, heat transfer and dimensional analysis for engine, engine off design
pressure drop calculations, plate heat exchangers, operations, aircraft engine component matching.
thermal performance. Evaporators and Condensers:
References:
Condensation in horizontal and vertical tubes, thermal
design of shell and tube condensers, horizontal and 1. Kroes Michael J., and Wild Thomas W., Aircraft
vertical condensers with tube side and shell side Powerplants, 7th ed., Tata-McGraw-Hill, 2010.
condensation, flow boiling correlations, thermal design 2. Hill Philip, and Peterson Carl, Mechanics and
of evaporators. Furnace and Cooling towers: Types, Thermodynamics of Propulsion, Addison Wesley,
fundamentals of combustion, heat transfer and heat 1992.
balance in fired heaters, furnace heat transfer, working 3. Roy Bhaskar, Aircraft Propulsion, Elsevier, 2008.
of cooling tower, classification, concept of
4. Mattingly J. D., Elements of Propulsion - Gas MIE 4414: METAL & CERAMIC COMPOSITE
Turbines and Rockets, AIAA Education series, MATERIALS [3 0 0 3]
2006. Characteristics of MMC, Various types of Metal matrix
5. El-Sayed Ahmed, Aircraft Propulsion and Gas composites Alloy vs. MMC, Advantages of MMC,
Turbine Engines, Taylor and Francis (CRC Press), Limitations of MMC, Metal Matrix, Reinforcements,
2008. particles, fibres. Effect of reinforcement - Volume
6. Saravanamuttoo, H. I. H., Rogers G. F. C., and fraction – Rule of mixtures. Processing of MMC,
Cohen H., Gas Turbine Theory, 7th ed., Pearson, Powder metallurgy process, diffusion bonding, stir
2017. casting, squeeze casting. Deformation and damage in
7. Mathur M. L., and Sharma R. P., Gas Turbines and metal matrix composites, Fatigue of discontinuous
Jet Propulsion, Standard Publishers Distributors, metal matrix composites Mechanical behaviour of
Delhi, 2010. intermetallics and intermetallic matrix composites.
8. Yahya S. M., Fundamentals of Compressible flow Engineering ceramic materials, properties, advantages,
with Aircraft and Rocket Propulsion, 6th ed., New limitations, Monolithic ceramics, Need for CMC,
Age International Pvt.Ltd. New Delhi, 2018. Ceramic matrix, Various types of Ceramic Matrix
9. Ganesan V., Gas Turbines, Tata McGraw-Hill, composites, oxide ceramics, non-oxide ceramics,
New Delhi. 2005. aluminium oxide, silicon nitride, reinforcements,
particles, fibres, whiskers. Sintering, Hot pressing,
Cold isostatic pressing (CIPing), Hot isostatic pressing
MINOR SPECIALIZATION: MATERIALS
(HIPing), Structure-property relationships in ceramic
ENGINEERING
matrix composites References:
MIE 4413: PROCESSING OF POLYMERS AND
1. Nikhilesh Chawla, Krishan K. C, Metal matrix
POLYMER COMPOSITES [3 0 0 3]
composites, Springer, 2012.
Engineering materials and processing techniques, 2. Nanjappan Natarajan, Vijayan Krishnaraj and
Thermoplastics and thermosets, Thermoforming Paulo Davim J., Metal Matrix Composites
process, Extrusion, Compression molding, Injection Synthesis, Wear Characteristics, Machinability
molding. Transfer molding, Rotational molding, Blow Study of MMC Brake Drum, Springer Briefs in
molding. Processing of polymer composites, Hand- Applied Sciences and technology -Manufacturing
layup, Spray-layup, Press molding, Compression and Surface Engineering, 2014.
molding, Injection molding. Reaction injection 3. Kainer K. U., Metal Matrix Composites: Custom-
molding, Autoclaving, Resin transfer molding, made Materials for Automotive and Aerospace
Filament winding, Pultrusion, VARIM, RTM, Vacuum Engineering, Wiley, 2006.
bagging, Sheet molding, Pre-pegging, Secondary 4. Longbiao Li, Time-Dependent Mechanical
processing of polymer composites, Manufacturing of Behaviour of Ceramic-Matrix Composites at
Composites, Micromechanics of composites, Testing Elevated Temperatures, Advanced Ceramics and
of composites, Mechanical properties, Tensile, Composites, Springer, 2020.
Flexural, ILSS, impact, thermal, wear properties,
standards of testing, NDT of composites.
MIE 4415: MATERIALS
References:
CHARACTERIZATION [3 0 0 3]
1. Chawla Krishan K. Composite materials: science
Importance of materials characterization for
and engineering, Springer Science & Business
Mechanical & Industrial Engineering, Hardness and
Media, 2012.
instrumentation, Micro and nano indentation hardness,
2. Mallick P. K., Fiber-reinforced composites:
Sample preparation for microstructure examinations,
materials, manufacturing, and design, CRC press,
Optical microscopy, Topography, Surface feature
2007.
studies using scanning electron microscopy, Elemental
3. Mazumdar Sanjay, Composites manufacturing:
chemistry identification by energy dispersive
materials, product, and process engineering, CRC
spectroscopy, Advanced materials characterizations
press, 2001.
using transmission electron microscopy, Elemental
4. Kaw Autar K., Mechanics of composite materials,
chemistry identification using electron energy loss
CRC press, 2005.
spectroscopy. Compounds /phases, Crystal structure,
Elemental composition by X-ray diffraction, X-Ray
fluorescence, Scanning auger microscopy.
References: pack Design, properties. AC and DC machines: Motor
and engine rating, DC machines, three phase A/C
1. Spencer Michael, Fundamentals of Light
machines, induction machines, permanent magnet
Microscopy, Cambridge University Press, 1982.
machines and switched reluctance machines. Clutch
2. David B. W., and Barry Carter C., Transmission
and Gearbox: Different types of clutch and gear box.
Electron Microscopy: A Textbook for Materials
Drive to wheels and tyres: Torque reaction, driving
Science, Springer, 2009.
thrust, torque tube drive, universal joint, propeller
3. Joseph I. G., Dale E. N., Patrick Echlin, and David
shaft, differential gearbox, types of the rear axle, tyres
C. J., Scanning Electron Microscopy and X-Ray
- desirable tyre properties, tube, and tubeless tyres.
Microanalysis, 3rd ed., 2005.
Steering and suspension system: Steering geometry,
4. Ray Egerton, Physical Principles of Electron
steering mechanism, steering linkages for rigid axle
Microscopy, Springer Science, 2005.
and independent suspension systems. Brakes: Brake
5. Brandon D., and Kaplan W., Microstructural
efficiency and stopping distance, types of brakes,
Characterization of Materials, John Wiley and
balance beam compensator, antilock braking system.
Sons, 1999.
Combustion: Combustion in SI engines, combustion
MIE 4416: FIBER REINFORCED COMPOSITE knock, SI engine combustion chamber, combustion in
MECHANICS & MFG. TECHNIQUES [3 0 0 3] CI engines: DI and IDI systems, delay period and diesel
Importance, classification and application of composite knock, control of diesel knock, CI engines combustion
materials, Materials – Types of fibers, Thermoset and chambers. Automotive emission control system:
thermoplastic polymers, Fiber surface treatments, Controlling crankcase and evaporative emissions,
Processing of polymer composite materials, Hand exhaust gas recirculation, air-aspirator system,
layup, Spray up, Compression, Bag molding, catalytic converter, emission standards- Euro norms,
Pultrusion, Resin transfer molding, Injection, Filament Bharat Stage norms.
winding, Micromechanical analysis of lamina, volume, References:
weight, density ratios, Macro mechanical Behavior of
a Lamina, Compliance and stiffness matrices, Macro 1. Hussain Iqbal, Electric & Hybrid Vehicles –
mechanical Behavior of a laminate, Classical Design Fundamentals, 2nd ed., CRC Press, 2011.
Lamination theory, Theories of failures, Maximum 2. Larminie James, Electric Vehicle Technology
stress theory, Maximum strain theory, Tsai-Hill theory, Explained, John Wiley & Sons, 2003.
Tsai Wu failure theory, Testing of composite materials, 3. Singh Kirpal, Automobile Engineering Vol. I & II,
tensile, compression, flexural properties. 13th ed., Standard Publishers Distributors, New
Delhi, 2017.
References: 4. Rajput R. K., Automobile Engineering, 2nd ed.,
1. Mallik P. K., Fiber Reinforced Composites: Laxmi Publication (P) Ltd, 2017.
Materials, Manufacturing and Design, 3rd ed., 5. Jain K. K., and R. B. Asthana, Automobile
CRC, 2007 Engineering, 1st ed., Tata McGraw Hill Education,
2. Kaw Autar K., Mechanics of Composite Materials, New Delhi, 2017.
2nd ed., CRC Press New York, 1997. 6. Heywood John B, Internal Combustion Engine
3. Agarwal B. D., Broutman L. J., and Bert C. W., Fundamentals, 2nd ed., McGraw-Hill Education
Analysis and Performance of Fiber Composites, New York, 2018.
3rd ed., Wiley, 2012.
4. Jones Robert M., Mechanics of Composite
Materials, 2nd ed., Taylor & Francis Group, 1999. MIE 4418: AUTOMOTIVE TRANSMISSION
[3 0 0 3]
Different Types of Clutches - Principle - Construction
MINOR SPECIALIZATION: VEHICLE and Torque Capacity. Determination of Gear Ratios for
TECHNOLOGY Vehicles. Different Types of Gearboxes Such as
Sliding Mesh Gearbox – Constant Mesh Gearbox and
MIE 4417: AUTOMOBILE ENGINES AND
COMBUSTION [3 0 0 3] Synchromesh Gearbox. All Spur and internal Gear
Type Planetary Gearboxes - Ford T-Model - Cotal and
Introduction: SI and CI engines, main components, Wilson Gear Box - Determination of Gear Ratios -
electric vehicles and hybrid vehicles components, Automatic Overdrives: Principal of Torque Conversion
vehicle kinetics, dynamics of vehicle motion. Battery: - Single - Multistage and Polyphase Torque Converters
Discharge rate, state of charge and discharge, battery - Performance Characteristics. Automatic
Transmission: Relative Merits and Demerits When and efficiency of batteries. Conditions at starting,
Compared to Conventional Transmission - Automatic behavior of starter during starting, series motor and its
Control of Gears. Hydrostatic Drives: Advantages and characteristics, principle and construction of starter
Disadvantages - Principles of Hydrostatic Drive motor, Bendix type, solenoid operated and axle type of
Systems. starter motor. Generation of direct current, shunt
generator characteristics, armature reaction, cutout,
References:
voltage and current regulators. Inductive, Hall effect,
1. Heldt P. M., Torque converters, Chilton Book Co., thermistors, piezo electric, piezo resistive based
1992. sensors, Solenoids. Components for electronic engine
2. Garrett T. K., Steeds W., and Newton K., The management system, open and closed loop control
Motor vehicle, 13th ed., Butterworth-Heinemann, strategies, PID control, look up tables. Layout and
2001. working of SI Engine Management Systems. Group
3. Judge A.W., Modern Transmission systems, and Sequential Injection Techniques. MPFI, GDI,
Chapman and Hall Ltd., 1990. advantages of electronic Ignition systems. Cold start
4. Crouse W. H., and Anglin D. L., Automotive and warm up phases, idle speed control, acceleration
Transmission and Power Trains construction, and full load enrichment, deceleration fuel cutoff.
McGraw Hill, 1983.
References:
1. Bechhold, Understanding Automotive Electronics,
MIE 4419: ELECTRIC AND HYBRID
SAE, 1998.
VEHICLES [3 0 0 3]
2. Crouse W.H., Automobile Electrical Equipment,
Hybrid vehicles – Performance characteristics of road McGraw Hill Book Co. Inc. New York, 3rd ed.,
vehicles – calculation of road load – predicting fuel 1986.
economy – grid connected hybrids. Hybrid 3. Judge A. W., Modern Electrical Equipment of
architecture – Series, Parallel and Series Parallel Automobiles, Chapman & Hall, London, 1992.
Configuration Locomotive Drives – Switching – Load 4. Young A. P., and Griffiths. L., Automotive
Tracking Architecture. Hybrid Power plant Electrical Equipment, ELBS & New Press, 1999.
specifications – Grade and Cruise Targets – Launching
and Boosting – Braking and Energy Recuperation –
Drive Cycle Implications. Sizing the drive system, MINOR SPECIALIZATION: AUTOMATION
matching electric drive and ICE, Sizing the propulsion AND ROBOTICS
Motor, Power Electronics. Fuel Cell characteristics –
MIE 4421: ROBOTICS: MECHANICS AND
Fuel Cell Types – Alkaline Fuel Cell – Proton
CONTROL [3 0 0 3]
Exchange Membrane – Direct Methanol Fuel Cell –
Phosphoric Acid Fuel Cell. Nonelectric Hybrid Introduction: Definition of robots, Automation and
Propulsion Systems – Short Term Storage. Flywheel. Robotics, History of Robots, Anatomy of Robot, Robot
Accumulators – Continuously Variable Transmission. configuration, Robot Motions, Work Volume, Drive
System, Control System, Precision of movement,
References:
Specification of a robot, Applications of industrial
1. Halderman James D., and Martin Tony, Hybrid robots. Robot Motion Analysis: Coordinate frames,
and Alternative Fuel Vehicles, 2nd ed., 2010. Mapping and Transforms. Inverting a homogeneous
2. Arvid Linde, How your car works: Your guide to transform, Euler angle representation. Kinematic
the components and systems of modern cars, modelling of the manipulator, Joint
Including Hybrid and Electric Vehicles, Rac
Notations in kinematics, Denavit – Hartenberg
Handbook, 2011.
Notation. Manipulator Transformation matrix. Inverse
3. Hussain Iqbal, Electric & Hybrid Vehicles –
Kinematics, Position Representation, Robot arm/
Design Fundamentals, 2nd ed., CRC Press, 2011.
manipulator, Forward and reverse transformation of 2
4. Chris Mi, Masrur M. Abul, and David Wenzhong
degree of freedom arm. Robot end effectors: Types end
Gao, Hybrid Electric Vehicles: Principles and
effectors, Mechanical grippers and their mechanisms,
Applications with Practical Perspectives, 2011.
Force analysis of gripper, vacuum cups, magnetic
MIE 4420: AUTOTRONICS [3 0 0 3] grippers, hooks and scoops, tools as end effectors,
Principle and construction of Lead Acid and Lithium – Physical support of the end effectors, Power and signal
Ion Battery, Characteristics of battery, rating capacity transmission, Guidelines for gripper selection.
Trajectory Planning: Joint-space schemes, Cartesian-
space schemes, Geometric problems with Cartesian hydraulics. Hydraulic actuators, accessories and
paths, path generation at run time, collision free path valves: Actuators: linear, rotary, and telescopic;
planning. Robot Control Systems: Control system Accumulator: types, and applications; Construction,
concepts, Mathematical models, Transfer Functions, and working of direction control valves: 2/2 way, 3/2
Characteristic equation for spring mass dampener way, 4/2 way, 4/3 way; Hydraulic circuits:
system, Types of controllers. Regenerative; Meter in, and meter out; Bleed off;
Sequencing; Pressure reducing circuits; Electro
References:
hydraulic circuits. Introduction to pneumatic systems:
1. Mittal R. K., and Nagrath I. J., Robotics and Advantages, limitations, and applications; Manual
Control, Mc Graw Hill Education (India) Pvt. Ltd. pneumatics: Symbols of pneumatic valves; Traverse
2. Groover Mikell P., Weiss Mitchel, Nagel Roger time diagram; Design of manually operated circuits;
N., Odrey Nichoas G., and Dutta Ashish, Industrial Control of multiple actuators. Electropneumatics:
Robotics, 2nd ed., McGraw Hill Education (India) Introduction; Structure of signal flow; Advantages of
Pvt. Ltd, 2012. electro pneumatics; Limit switches; Proximity sensors:
3. Craig John J., Introduction to Robotics: Mechanics Magnetic, Inductive, Capacitive, Optical, Ultrasonic,
and Control, Pearson Prentice Hall Publication. and Pneumatic; electrically actuated direction control
4. Janakiraman P. A., Robotics and Image valves; Relay control systems; Design of electro
processing, Tata McGraw Hill. 1995. pneumatic circuits.
References:
MIE 4422: ELEMENTS OF MECHATRONICS 1. Croser Peter, and Ebel Frank, Pneumatics Basic
SYSTEMS [3 0 0 3] Level TP 101, Festo Didactic GMBH Co,
Introduction: Definition, basic concepts and elements Germany, 2002.
of mechatronic systems, needs and benefits of 2. Prede G. and Scholz D., Electropneumatics Basic
mechatronics in manufacturing, Sensors, Transducers: Level, Festo Didactic GMBH & Co, Germany,
Displacement. Piezoelectric actuators, Shape memory 2002.
alloys. Hydraulic & Pneumatic devices – Power 3. Merkle D., Schrader B., and Thomes M.,
supplies, valves, cylinder sequencing. Data acquisition Hydraulics Basic Level TP 501, Festo Didactic
and translation: Signal conditioning – Operational GMBH & Co, Germany, 1998.
amplifiers, inverting amplifier, differential amplifier, 4. Rohner Peter, Industrial Hydraulic Control, John
Protection, comparator, filters, Multiplexer, Pulse Wiley & Sons, Brisbane,1989.
width Modulation Counters, decoders, ADC, DAC
Signal Analysis - Linearization of data, Compensation,
Signal Averaging, Fourier analysis. Data presentation MIE 4424: MECHANICAL HANDLING
system: Display - Cathode ray oscilloscope, LED, SYSTEMS AND EQUIPMENTS [3 0 0 3]
LCD, Printers, Magnetic Recording, Controllers and Elements of Material Handling System: Importance,
Algorithms: Microprocessor Applications. Terminology, Principles and features, Objectives and
benefits of better material handling, Selection of
References:
Material Handling Equipment: Factors affecting for
1. Alciatore David G., and Histand Michael B., selection, material handling equation, choices of
Introduction to Mechatronics and Measurement material handling equipment. General analysis and
systems, Tata McGraw Hill, 2003. procedure: Basic analytic techniques, the unit load
2. Boltan W., Mechatronics, Addison Wesley concept. Selection of suitable types of systems for
Longman Ltd, 1999. applications. Design of Mechanical Handling
3. Shetty Devdas, and Kolk Richard, Mechatronics Equipment: Design of hoists, drives for hoisting
System Design, PWS Publishing, 2001. components and hoisting mechanisms; rail travelling
4. Nesculescu Dan, Mechatronics, Pearson components and mechanisms; hoisting gear operation
Education Pvt. Ltd, 2002. during transient motion. Design of load lifting
attachments: Load chains and types of ropes used in
material handling system; forged, standard and
MIE 4423: FLUID DRIVES AND CONTROL Ramshom Hooks; crane Grabs and Clamps; Grab
[3 0 0 3] Buckets. Equipment of Material Storage: Objectives of
Introduction to Hydraulic systems: Advantages and storage, Bulk material handling; gravity flow of solids
limitations; Pascal’s law; Force transmission in through slides and chutes; Storage in bins and hoppers;
Material Handling / warehouse automation and safety MIE 4426: PRODUCTION PLANNING AND
considerations – storage and warehouse planning and CONTROL [3 0 0 3]
design; computerized warehouse planning; Need, Introduction: Functions of production, planning and
Factors and Indicators for consideration in warehouse control. Types of production activities, Production
automation; which function, when and How to consumption cycle. Forecasting Analysis: Importance
automate. and uses of forecasting, Type of forecasts, Qualitative
References: methods of forecasting, Quantitative methods of
forecasting, Exponential smoothing, Linear regression
1. Michael Rivkin, Bulk Material Handling,
analysis, Correlation analysis and Seasonality,
Partridge Publishing Singapore, 2018.
Forecast control. Aggregate planning: Need and inputs
2. Charles Reese, Material Handling Systems, Taylor
for aggregate production planning, Pure and mixed
& Francis, 2000.
strategies of aggregate planning. Aggregate planning
3. C.R. Woodcock & J.S. Mason, Bulk Solids
approach. Job shop scheduling: Factors affecting job
Handling, Springer Netherlands, 2012.
shop scheduling, Index method, Priority sequencing
4. Jacob Fruchtbaum, Bulk Materials Handling
rules, Determination of mean flow time, average job
Handbook, Springer US, 2013.
lateness and average number of jobs in the system,
5. Siddhartha Ray, Introduction to Materials
Sequencing of ‘n’ jobs through ‘n’ machines. Inventory
Handling, New Age International Private Limited,
control: Classification of inventories, Economic order
2007.
quantity, Inventory control models, Effect of quantity
MINOR SPECIALIZATION: QUALITY discount, Safety stock, Reorder level, Lead time, ABC
ENGINEERING Analysis. MRP: Product structure tree, MRP inputs and
outputs, MRP logic, Problems. Assembly line
MIE 4425: STATISTICAL QUALITY
balancing: Meaning and determination of cycle time
CONTROL [3 0 0 3]
and theoretical minimum number of workstations,
Definitions of the term quality, Causes of variation, Precedence diagram, Priority rules for allocation of
Patterns of variation, Frequency distribution, Measures tasks to workstations, Longest work element time rule,
of central tendency and dispersion, The Normal Maximum following tasks rule-Calculation of
distribution curve, Inequality theorems, efficiency and percentage delay loss.
Shewhart’s bowl drawing experiments, Control charts
for variables (X ̅ , R and s charts), Type I and Type II References:
Errors, Process capability analysis, Process capability 1. Monks Joseph G., Operations Management, Tata
indexes, Control charts for attributes ( p ,np, c and u McGraw-Hill Publishing Co. Ltd., New Delhi,
charts), Acceptance sampling by attributes, Single and 2004.
Double sampling plans, Operating characteristic curve, 2. Krajewski Lee J., and Ritzman Larry P.,
Acceptable quality level, Lot tolerance percent Operations Management, Pearson Education
defective, Average outgoing quality, Average total (Singapore) Pte. Ltd., Delhi, 2005.
Inspection, Average fraction inspected, Producers risk, 3. Adam Everett E. Jr., and Ebert Ronald J.,
Consumers risk, Acceptance sampling tables, Production and Operations Management, Prentice
Conventional and Statistical tolerancing, Precision, Hall of India Pvt. Ltd., New Delhi, 2002.
Accuracy and Reproducibility of method of 4. Chase Richard B., Aquilano Nicholas J., and
measurements, Quality costs. Jacobs F. Roberts, Production and Operations
Management, Tata McGraw-Hill Publishing Co.
References:
Ltd., New Delhi, 1999.
1. Grant E. L., and Levenworth R., Statistical Quality
Control, McGraw Hill Publications, 2005.
2. Montgomery D.C., Introduction to Statistical MIE 4427: OPERATIONS RESEARCH [3 0 0 3]
Quality Control, John Wieley and Sons, 2005.
Introduction: Definition, Phases, Applications,
3. Mahajan M.S., Statistical Quality Control,
Advantages and Limitations of Operations Research.
Dhanpat Rai and Co. Pvt. Ltd., 2012.
Linear programming problems: Assumptions,
4. Juran J.M., and Gryna F.M., Quality Planning and
Formulation of LPP for business and non-business
Analysis, Tata McGraw Hill Publications, 1995.
applications. Graphical solutions, Special cases –
Degeneracy, Infeasible Solution, Unbalanced and
Multiple optimal solutions. Minimization and
Maximization cases. Simplex algorithm, Concept of successful quality leaders, The Deming philosophy,
dual, Sensitivity analysis with respect to objective Quality council, Quality statements, Strategic
function coefficients and R.H.S. values. Transportation planning. Customer satisfaction, Employee
problem: Formulation, North-West Corner (NWC) involvement Continuous process improvement, Juran
Method, Least Cost (LC) Method, Vogel’s Trilogy, PDSA cycle, Kaizen, Six sigma, Supplier
Approximation Method (VAM). Testing the solution partnership, Performance measures, Quality costs,
by Stepping stone, Modified Distribution (MODI) Benchmarking, Quality function deployment (QFD),
Method. Maximization, Multiple optimal solutions, QFD process, Failure Mode and Effect Analysis
Degeneracy and Unbalanced problems. Post optimality (FMEA), Total Productive Maintenance (TPM), The
analysis. Assignment problem: Solution algorithm for seven tools of quality control, Statistical fundamentals,
Assignment Problems. Unbalanced, multiple optimal Control charts for variables and attributes, Concept of
solutions, Maximization and Application problems. six sigma quality, Taguchi’s quality loss function,
Travelling salesman / Job sequencing problem: Quality and environmental management systems,
Solution algorithm for Travelling Salesman Problem, Quality auditing, Case Studies.
Application to job sequencing problem Game theory:
References:
Introduction to game theory, Two-person-zero sum
games, Pure and Mixed Strategies, Solution methods 1. Besterfield Dale H., Besterfield-Michna Carol,
for 2 x 2 games, Graphical method (2 x n games; m x 2 Besterfield Glen, Besterfield-Sacre Mary,
games), Simulation of queuing system - Steps in Urdhwarshe Hemant, and Urdwarshe Rashmi,
simulation, Application and Limitations, Monte- Carlo Total Quality Management. Revised 3rd ed.,
technique-Problems involving Waiting line situations Pearson Education, New Delhi, 2012
and Selection of crew members. Critical Path Method 2. Evans James R., and Lindsay William M., The
(CPM): General framework, Introduction to elements Management and Control of Quality, 5th ed.,
of network, conventions adapted in drawing network, South-Western Thomson Learning, 2002.
analysing the network. Calculation of event and 3. Oakland John S., Total Quality Management text
Activity times, Total Float, Free Float, Independent with Cases, Elsevier, New Delhi, 2006
float, Critical path, Determination of project duration, 4. Besterfield Dale H., Total Quality Management,
Project Crashing. Applications and Limitations of Pearson Education, Delhi, 2006.
CPM. Project Evaluation and Review Technique MINOR SPECIALIZATION: COMPUTER
(PERT): Calculation of Probabilistic/Expected event TECHNIQUES IN MECHANICAL
and Activity times, Variance of activity duration, ENGINEERING
Determination of critical path, probability/expectation
of project completion. MIE 4429: PROGRAMMING IN MECHANICAL
ENGINEERING [3 0 0 3]
References:
Introduction to programming, Programming the matrix
1. Taha H. A., Operations Research, Pearson algebra, Programming for plotting engineering charts,
Education, 7th ed., 2002. Programming applications in numerical analysis,
2. Winston W. L., Operations Research, Thomson Programming case studies in mechanical engineering -
Asia, 2003. Solid geometry, Engineering mechanics, Geometric
3. Vohra N. D., Quantitative Techniques in Transformations, Machine design, Mechanical
Management, New Delhi, 2007. vibration, Fluid mechanics, Thermal science, FEA of
4. Sharma S. D., Operations Research, Kedar Nath structural systems.
Ramnath Publications, 14th ed., 2005
5. Wagnor Hervey M., Principles of Operations References:
Research, Prentice Hall of India Private Ltd, 1999. 1. Rao V. Dukkipati, MATLAB for Mechanical
6. Paul Loomba, Management, A Quantitative Engineers, New Age Science Limited, 2009.
Perspective, MacMillan, New York, 1978. 2. Rao V. Dukkipati, Solving Engineering Systems
Dynamics Problems with MATLAB, New Age
International (P) Limited, 2007.
MIE 4428: TOTAL QUALITY MANAGEMENT 3. Steven T. Karris, Numerical Analysis Using
[3 0 0 3] MATLAB® and Spreadsheets, 3rd ed., Orchard
Definition of quality and Total quality management Publications, 2007.
(TQM), Basic concepts of TQM, Contributions of
Gurus of TQM, Benefits of TQM, Characteristics of
4. Orbaiceta, Angel Sola. Hardcore Programming for MIE 4431: MACHINE LEARNING AND
Mechanical Engineers: Build Engineering APPLICATIONS [3 0 0 3]
Applications from Scratch. No Starch Press, 2021. Machine Learning Definition and Basics; Learning
5. Alex Kenan, Python for Mechanical and Models - Supervised Learning (Classification Problem,
Aerospace Engineering, Licensed under a Creative Regression Problem), Unsupervised Learning, Semi
Commons Attribution-NonCommercial- supervised Learning, Reinforcement Learning;
ShareAlike 4.0 International License, 2020. Regressions - Linear Regression, Normal Equation
6. Amos Gilat, MATLAB®An Introduction with Method vs Gradient Descent Method, Logistic
Applications, 4th ed., JOHN WILEY & SONS, Regression; Model improvement - Nonlinear
INC., 2011. Contribution, Feature Scaling, Gradient Descent
Algorithm Variations, Regularization, Multi-class
Classifications; Classification - Nonlinear Decision
MIE 4430: ADVANCED METAHEURISTIC
Boundary, Skewed Class, Naïve Bayes’ Algorithm,
OPTIMIZATION TECHNIQUES [3 0 0 3]
Support Vector Machines - Kernel Selection; Random
Introduction to Optimization: Optimization, Forests - Decision Tree, Disadvantages of Decision
mathematical structure of an optimization problem, Trees, Data Bagging, Feature Bagging, Cross
terminologies; Evolutionary optimization techniques: Validation, Prediction in Random Forests,
Types of evolutionary optimization techniques, the Disadvantages of Random Forests; Testing the
Genetic Algorithm (GA), structure and working Algorithm and the Network; Artificial Neural
principle of the GA; Swarm intelligence optimization Networks - Neural Network Representation, Training
techniques: Types of swarm intelligence optimization the Network, Backpropagation, Updating weights,
techniques, the Particle Swarm Optimization (PSO) Controlling computations; ML case studies in
technique, structure and working principle of the PSO; Mechanical Engineering - Implementation of machine
Algorithmic-specific-parameter-less optimization learning models to solve problems in Design
techniques: Limitations of the advanced metaheuristic Engineering, Thermal sciences, Vibration analysis,
optimization techniques, the Teaching Learning Based Materials engineering, Manufacturing engineering.
Optimization (TLBO) technique, the JAYA
References:
optimization technique, structure and working
principle of the TLBO and JAYA; Multi-objective 1. Jo T., Machine Learning Foundations Supervised,
optimization problems: Singleobjective versus the Unsupervised, and Advanced Learning, In
multi-objective optimization, Approaches of solving Machine Learning Foundations, Springer
multi-objective optimization problems; Application of International Publishing, 2021.
optimization techniques to Mechanical Engineering 2. Kramer O., Machine learning for evolution
problems. strategies, Springer International Publishing, 2016.
3. Rebala G., Ravi A. and Churuwala S., Introduction
References:
to Machine Learning, In Studies in Computational
1. Bozorg-Haddad Omid, Solgi Mohammad, and Intelligence, Vol. 975, 2021.
Loáiciga Hugo A., Meta‐Heuristic and 4. Manohar Swamynathan, Mastering Machine
Evolutionary Algorithms for Engineering Learning with Python in Six Steps, A Practical
Optimization, John Wiley & Sons, Inc., 2017. Implementation Guide to Predictive Data
2. Deb Kalyanmoy, Multi-objective optimisation Analytics Using Python, Second Edition, APress,
using evolutionary algorithms, Wiley, 2001. 2019.
3. Goldberg David E., Genetic Algorithms in Search, 5. Rodrigo Fernandes De Mello and Moacir
Optimization, and Machine Learning, Addison- Antonelli Ponti, Machine Learning, A Practical
Wesley Professional, 1989. Approach on the Statistical Learning Theory,
4. Sun Jun, Lai Choi-Hong, and Wu Xiao-Jun, Springer International Publishing AG, 2018.
Particle Swarm Optimisation Classical and 6. Oliver Theobald, Machine Learning For Absolute
Quantum Perspectives, CRC Press, Taylor & Beginners: A Plain English Introduction, 3rd ed.,
Francis Group, 2019. 2021.
5. Rao Ravipudi Venkata, Jaya: An advanced
Optimization Algorithm and its Engineering
Applications, Springer International Publishing,
2019.
 MIE 4432: MICROCONTROLLER BASED Theorem, Unit load Method - Application to Beams,
AUTOMATION [3 0 0 3] Trusses, Frames, Rings, etc. Euler buckling of
Introduction to microcontrollers, embedded system and columns, Inelastic buckling, Effect of Initial
automation, Instruction set architecture of ARM Imperfections, Beam Columns, Stability of Beams
microcontroller, Embedded C programming, sensors, under Transverse and Axial Loads. Theory of pure
actuators and their interfacing, Microcontroller Bending. Torsion of Beams. Theory of symmetrical
development boards and embedded programming and unsymmetrical bending of beams. Ductile and
platforms, D/A and A/D converter, Timers, Delay Brittle Materials Maximum Stress theory – Maximum
generation, PWM, Inter Integrated Circuit Strain Theory – Maximum Shear Stress Theory –
communication, Universal Asynchronous Distortion Theory – Maximum Strain energy theory
Receiver/Transmitter, Serial Peripheral Interface and simple problems of shaft under combined loading.
communication protocols, Temperature sensing unit, References:
Light sensing unit, Sound sensing unit, Feedback
1. Ramamurtham S., Strength of Materials, Dhanpat
control system, relay control unit, driving electrical
Rai Publishing Co, New Delhi, 2008.
appliances like motors, bulb, pump, etc. motion sensing
2. Megson T. M. G., Aircraft Structures for
using accelerometer, control of appliances, case study
Engineering Students, Edward Arnold, 2007.
based on automation sectors.
3. Donaldson B. K., Analysis of Aircraft Structures,
References: Cambridge Aerospace Series, McGraw-Hill, 2008.
1. Cem Ünsalan, Hüseyin Deniz Gürhan, Mehmet 4. Timoshenko S., Strength of materials, Vols. I & II,
Erkin Yücel, Embedded System Design with Arm Princeton, D. Von Nostrand Co.,1988.
Cortex-M Microcontrollers, Springer Cham, 2022. 5. Peery D. J., Aircraft Structures, McGraw–Hill,
2. Mazidi, and Naimi, STM32 Arm Programming for N.Y., 2011.
Embedded Systems, Microdigitaled, 2018. 6. Rivello R. M., Theory and Analysis of Flight
3. Carmine Noviello, Mastering STM32, A step-by- Structures, McGraw Hill, 1993.
step guide to the most complete ARM Cortex-M
platform, LeanPub.com, 2022.
AAE ****: FLIGHT DYNAMICS AND
4. Donald Norris, Programming with STM32:
CONTROL [3 0 0 3]
Getting Started with the Nucleo Board and C/C++,
McGraw-Hill Education, 2018. Aircraft Equations of Motion, Modelling of
5. Dogan Ibrahim, Nucleo Boards Programming with Longitudinal Aerodynamic Forces and Moments in
the STM32CubeIDE, Elektor Verlag, 2022. Steady State, Modelling of Longitudinal Aerodynamic
6. Yury Magda, ARM Assembly Language Forces and Moments in Perturbed State, Modelling of
Programming With STM32 Microcontrollers: Lateral Directional Aerodynamic Forces and Moments
Learning By Example, 2020. in Steady state, Modelling of Lateral Directional
7. https://www.st.com/en/development- Aerodynamic Forces and Moments in Perturbed State,
tools/stm32cubeide.html Static Stability, Modelling of Longitudinal and Lateral
Directional Thrust Forces and Moments in both Steady
and Perturbed State, Dynamic Stability, Solutions to
MINOR SPECIALIZATION: AERONAUTICAL Longitudinal Equations, Longitudinal Dynamic Modes
(MAHE DUBAI CAMPUS) and Approximations: Short Period and Phugoid,
Lateral Directional Dynamic Modes and
AAE ****: INTRODUCTION TO AIRCRAFT
Approximations: Spiral, Roll Subsidence and Dutch
STRUCTURES [3 0 0 3]
Roll, sensitivity analysis and Cooper Harper Ratings.
Introduction to Aircraft Structural Components and
References:
their functions, Loads on Airframe, Stresses: Tensile,
Compressive and Shear, Determination of Stresses on 1. Napolitano M. R., Aircraft Dynamics from
Inclined Planes, Principal Stresses, Strain. Analysis of Modeling and Simulation, WILEY Publications,
Plane Truss – Method of Joints – 3 D Truss -Plane 2012.
Frames - Composite Beam. Propped Cantilevers-- 2. Schmidt L. V., Introduction to Aircraft Flight
Fixed- Fixed Beam- Clapeyron's Three Moment Dynamics, AIAA Education Series, 2001.
Equation - Moment Distribution Method. Strain 3. McRuer D., et. al., Aircraft Dynamics and
Energy due to Axial, Bending and Torsional Loads - Automatic Control, Princeton University Press,
Castigliano's theorem - Maxwell's Reciprocal NJ, 2004.
4. Stengel R. F., Flight Dynamics, Princeton Combustion systems: Combustion mechanism and
University Press, NJ, 2004. important combustion parameters, combustion
5. Roskam Jan, Airplane Flight Dynamics and efficiency, combustion intensity, fuels and their
Automatic Flight Controls, DAR Corporation, properties, fuel injection systems. Intakes and
2001. propelling nozzles: Requirements of an intake, aircraft
intake design considerations, propelling nozzles,
AAE ****: AIRCRAFT DESIGN [3-1-0-4]
energy conversion in a nozzle, nozzle design
Overview of the Design Process, Airfoil and Geometry considerations. Engine installed performance, sizing
Selection, Design constraint diagram - Thrust-to- and matching: Installed performance of engine,
Weight Ratio and Wing Loading, Takeoff Weight and dimensional analysis for engine, engine off design
Empty weight. Initial Sizing. Control-Surface Sizing, operations, aircraft engine component matching.
Engine selection; Configuration Layout - Wing,
References:
Landing Gear and Engine location. 3 View diagram,
Aerodynamic Considerations, Structural 1. Kroes Michael J., and Wild Thomas W., Aircraft
Considerations, Vulnerability Considerations, Powerplants, 7th ed., Tata-McGraw-Hill, 2010.
Propulsion and Fuel System Integration, Design Cycle 2. Roy Bhaskar, Aircraft Propulsion, Elsevier, 2008.
of a New Design – Feasibility, Configuration Design, 3. Mattingly J. D., Elements of Propulsion - Gas
Detailed Design phases - Aerodynamics, Propulsion, Turbines and Rockets, AIAA Education series,
Flight Performance, Structures and Loads, Weight and 2006.
CG, Group Weights Method, Longitudinal Static 4. El-Sayed Ahmed, Aircraft Propulsion and Gas
Stability and Control, Lateral-Directional Static Turbine Engines, Taylor and Francis (CRC Press),
Stability and Control and Handling Qualities. Design 2008.
Compliance Matrix. 5. Saravanamuttoo, H. I. H., Rogers G. F. C., and
Cohen H., Gas Turbine Theory, 7th ed., Pearson,
References:
2017.
1. Nicolai Leland, and Carinchner Grant, 6. Mathur M. L., and Sharma R. P., Gas Turbines and
Fundamentals of aircraft and aircraft design, Jet Propulsion, Standard Publishers Distributors,
AIAA Educational Series – Vol. 1. Delhi, 2010.
2. Raymer Daniel P., Aircraft Design – A Conceptual 7. Yahya S. M., Fundamentals of Compressible flow
approach, Vol 1, AIAA. with Aircraft and Rocket Propulsion, 6th ed., New
3. Jenkinson Lloyd R., Simpkin Paul, and Rhodes Age International Pvt.Ltd. New Delhi, 2018.
Parren, Civil Jet Aircraft Design, AIAA. Ganesan V., Gas Turbines, Tata McGraw-Hill,
4. Jenkionson L. R., and Machman J. F., Aircraft New Delhi. 2005.
Design projects for engineering students
5. Brandt Steven A., Stiles Randall J., Bertin John J.,
and Whitford Ray, Introduction to Aeronautics: A
Design Perspective, AIAA Education Series.
MIE ****: JET PROPULSION [3 0 0 3]
Introduction to aircraft propulsion: Jet engine
performance parameters; Thrust, SFC, efficiencies,
single and multispool gas turbine based propulsive
devices. Real cycle thermodynamic analysis: Ideal and
real Brayton cycles, Jet engine cycles for aircraft
propulsion. cycle components and component
performance, analysis of engine real cycles.
Fundamentals of rotating components:
Thermodynamics of compressors and turbines,
development of parameters for compressor and
turbines. Compressors and turbines: Loss and blade
performance estimation, single and multistage axial
compressor characteristics, elements of centrifugal
compressor, concept of rothalpy, centrifugal
compressor characteristics, surging and choking.