PRIMASIA FOUNDATION COLLEGE, INC.

Poblacion Alabel, Sarangani Province

Tel. No. (083)-554-6285
Email Address: [email protected]
School Year: 2022- 2023
Primasia Foundation College
School Grade Level 11
Inc.
Teacher Jamaica C. Mallero Learning Area TLE- ICT
Teaching Date Quarter FIRST
Teaching Time No. of Day/s 1
DAILY LESSON PLAN

A. Content The learners demonstrate an understanding of concepts and principles in

Standards setting up computer networks
B. Performance The learners independently do a network cabling procedure.
Standard
C. Most Essential
Learning Network Cabling
Competencies
(MELC)(If available (TLE_IACSS912SUCN- IVa-j-33)
write the indicated
MELC)
I. OBJECTIVES At the end of the lesson, learners are expected to:
1. Identify the different types of network cable and the two wiring
standards used for wired Ethernet networks.
2. Value the importance of different types of network cable according to
its use.
3. Perform straight-through Ethernet cable by crimping.

II. CONTENT Network Cabling

III. LEARNING
RESOURCES

A. References Computer Network Cabling

https://apluscablerunners.com/2019/02/24/computer-network-
cabling- types-of-cables-available/
How to wire Ethernet Cable
https://www.ertyu.org/steven_nikkel/ethernetcables.html

a. Teacher's Guide
Pages
b. Learner's Crimping tool, Cable Tester, UTP cable, RJ45, Laptop, Projector
Material Pages

09465625876
c. Textbook Pages
d. Additional
Materials from
Learning
Resources
B. List of Learning
Resources for
Development and
Engagement
Activities
C. INTEGRATION Literacy – Speaking, Writing, and Reasoning Skills
IV. PROCEDURES o Prayer- Student
(Time Frame:5 o Greetings
minutes) o Attendance- Student
o Classroom Rules- Audiovisual Presentation
o Review
What was your last lesson all about?
What did you learn about your previous lesson?

Task 1: (Identifying)

The learner will identify the given pictures shown below

A. ACTIVITY
Preliminaries,
Presentation of the
new lesson)
(Time Frame:10
minutes)

B. ANALYSIS Guide Question

(Time Frame: 5
minutes) What are the network cabling tools?
Importance of network cabling?

09465625876
 Cable - Is a medium which information usually moves from one network
C. ABSTRACTION device to another.
(Time Frame: 10
minutes) Classification of network cable:
Coaxial Cable - have a single copper conductor at its center. A plastic layer
provides insulation between the center conductor and a braided metal
shield.
Fiber Optic Cable - Consist of a center glass core surrounded by several
layers of protective materials.
Twisted Pair - Is a type of wire in which the two conductor of a single circuit
are twisted together.
Shielded Twisted Pair (STP) Cable - Has a metal foil or braided mesh
covering each pair of insulated conductor.
Unshielded Twisted Pair (UTP) Cable – the most common used Ethernet
cable cause it is very cheap and easy to install
Two Type of Ethernet cable color code:
Straight Through – It is used to connect different computer devices such as
PC to Modem, PC to Switch, Router to Switch or PC to Server.
• T-568A – White Green, Green, White Orange, Blue, White Blue,
Orange, White Brown, Brown
• T568B – White Orange, Orange, White Green, Blue, White Blue,
Green, White Brown, Brown.
Crossover – It is used to connect same computer devices such as PC to PC,
Switch to Switch, and Router to Router.
Tools and Materials Needed to Wire Ethernet cable: UTP Cable, RJ45,
Crimping Tool and LAN/Cable Tester Steps and Procedure on how to wire
Ethernet cable:
❖ Strip off about 2 inches of the cable sheath.
❖ Untwist the pairs - don't untwist them beyond what you have exposed
❖ Align the colored wires according to the diagrams above.
❖ Trim all the wires to the same length, about 1/2" to 3/4" left exposed
from the sheath.
❖ Insert the wires into the RJ45 end - make sure each wire is fully
inserted to the front of the RJ45 end and in the correct order.
❖ Verify the wires ended up the right order and that the wires extend to
the front of the RJ45 end and make good contact with the metal contacts in
the RJ45 end.
❖ Crimp the RJ45 end with the crimper tool
❖ Cut the cable to length - make sure it is more than long enough for
your needs
❖ Repeat the above steps for the second RJ45 end.
❖ Use a cable tester to verify the proper connectivity of the cable.
Safety Precaution
❖ Avoid Hoarse Playing
❖ Use the tool properly
❖ Always be on task
❖ Be Vigilant
❖ Follow OH&S procedure and 5’s

09465625876
D. APPLICATION Task 2.1: The students will create a straight-through Ethernet
(Time Frame: 20 cable by following the steps in crimping the Ethernet cable for 15
minutes)
minutes.

Task 2.2: (Essay)

1. What is crossover Ethernet cable?
2. Identify the function of cross over Ethernet cable.

V. Network cabling is the process of creating LAN cable which is used

GENERALIZATION to interconnect one network devices to another. Although it did not
(Time Frame: 3
have high quality than the other types of network cable, UTP cable
mins.)
is the most commonly used because it is cheap and easy to install.
There two type of LAN cable the straight-through and crossover
with their standard color coding.

Always take into considerations that before using the cable in

connecting actual devices. It is suggested that you must use a
LAN/Cable tester first to check the functionality of the cable.

VII. EVALUATION Task 3: Enumeration:

(Time Frame: 5
mins.) Student’s performance will be evaluated/rated using the
performance criteria and the performance standard.

VIII. ASSIGNMENT 1. What are internet protocols?

(Time Frame: 5 2. Identify and describe the different protocols used in networks and the
mins.) internet.

PREPARED BY:
JAMAICA C. MALLERO
Pre-Service Teacher

09465625876