POST GRADUATE

WORK EXPERIENCE REPORT

BY

(………………………….)

SUBMITTED TO
COUNCIL FOR THE REGULATION OF
ENGINEERING IN NIGERIA
(COREN)

1
6.0 GUIDELINE FOR THE WORK EXPERIENCE REPORT
Title Page

FEDERAL REPUBLIC OF NIGERIA

COUNCIL FOR THE REGULATION OF
ENGINEERING IN NIGERIA

WORK EXPERIENCE REPORT

BY

(…………………………….)

SUBMITTED IN PARTIAL FULFILMENT OF THE

REQUIREMENTS FOR REGISTRATION AS AN
ENGINEER/ENGINEERING TECHNOLOGIST

(ENGINEERING DISCIPLINE)

By: NAME (Candidate)

Application Id. No: XXXX
Mobile No.: 080 XXXX XXXX
Email:[email protected] Day, MM,YYYY

2
6.1 Certification CHAPTER
I certify that this report was written by me and it is a record of my post graduate work
experience.

______________________ ______________________
Name Signature and Date

I, the undersigned, have gone through the report that has been prepared and I endorse
the experience attained and reported by the writer. Based on my personal knowledge of
the character and professional reputation of the applicant, I recommend for acceptance
of this work Experience report by the COREN in partial fulfillment of the requirements
for registration as Registered Engineer/Engineering Technologist.

______________________ ______________________
Name Stamp and Date

______________________
Date

3
 CHAPTER
CHAPTER ONE

1.0 INTRODUCTION
 Summary of your academic and professional Engineering Work Experience
(Maximum of one page).

Practice and understanding of Engineering in: planning, design, production, construction,

installation, fabrication, testing, commissioning, maintenance, operations, research and/ or
sales of Engineering Products

4
 CHAPTER TWO

2.0 SUMMARY OF WORK EXPERIENCE

Period Detail of Projects/Activities Duration Supervisor

(Months)
Name Signature

EMPLOYER:

Position: Trainee

Project:

Activities undertaken were for examples: -

(i) Preparation of annual maintenance

plan.
(ii) Prioritizing the road to be maintained.
(iii) Prepare 3year strategic plan for road
works.
(i) Conduct Annual District Road
Inventory and Condition Survey.
(ii) Categories maintenance work into different
interventions i.e. Periodic, Spot
improvement and routine maintenance.

5
 CHAPTER THREE

3.0 DETAILS OF ENGINEERING WORK EXPERIENCE

3.1 Project: Design of bridge along Abuja – Lafia Road (193km)
3.1.1 Project Particulars (e.g.)
Client: Federal Ministry of Works and Housing, Abuja
Project cost: N80 Billion
Consultant: Etteh Aro & Partners
Position held: Trainee
Period: 6 Months

3.1.2 Project description

• Introduction of the project
• Objective

3.1.3 Feasibility Study

3.1.4 Applications of Health, Safety and Environmental Standards to the Area of Practice

3.1.5 Scope of the Works

To be defined by applicant. Design and preparation of detail drawings (ability to
interpret/calculate/analyze the basic equipment/process parameters).

Example: carrying out of feasibility study so as to prepare design equitable for a bridge
of total length of 33m long, Design and preparation of detail drawings, prepare bills of
quantities; cost estimation, preparation of proposal to solicit funds and preparing tender
documents.

3.1.6 Preparation of BEME and Tender Documents:

3.1.7 Proffering Solutions to Engineering Problems

6
 CHAPTER FOUR

4.0 CONCLUSION AND EXPERIENCE GAINED

APPENDICES

Design Calculations - To be signed and sealed by a Registered Engineer on every page.

Design Drawings - To be signed and stamped by a Registered Engineer

7
8