Scribd
Upload
149 views2 pages

Mass Timber Window Connection Skylight Var. 1

The document provides details on Variation 1 of a mass timber skylight connection system from Pro Clima. It includes a diagram and notes on the system. The system uses Pro Clima water deflectors, profiles, and membranes like TESCON EXTORA and SOLITEX EXTASANA ADHERO to provide an airtight seal around the skylight. An underlay membrane, vapor retardant membrane, and vapor permeable insulation are also included to control air and vapor flow. Notes specify requirements for insulation type and additional water barriers depending on the materials used.

Uploaded by

dean
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
149 views2 pages

Mass Timber Window Connection Skylight Var. 1

The document provides details on Variation 1 of a mass timber skylight connection system from Pro Clima. It includes a diagram and notes on the system. The system uses Pro Clima water deflectors, profiles, and membranes like TESCON EXTORA and SOLITEX EXTASANA ADHERO to provide an airtight seal around the skylight. An underlay membrane, vapor retardant membrane, and vapor permeable insulation are also included to control air and vapor flow. Notes specify requirements for insulation type and additional water barriers depending on the materials used.

Uploaded by

dean
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

W4571-1 Pro Clima - Mass Timber Skylight Connection

Variation 1

Scale 1:10 @ A4 paper

pro clima
TESCON EXTORA®
Water deflector

TESCON EXTORA®
PROFIL alt. also
TESCON EXTORA®

SKYLIGHT

Airtight bonding with


pro clima TESCON VANA®

pliable building membrane


(underlay), pro clima
SOLITEX MENTO® family

Vertical batten

Cavity (min. 20mm)

High-performance vapor
retardant membrane
pro clima INTELLO® plus

Vapour permeable Airtight bonding with pro clima


fibrous insulation* TESCON EXTORA®
Plaster board
Cross laminated
timber element Full-surface adhesive air
sealing membrane with
pro clima SOLITEX
EXTASANA ADHERO®

*Notes:
1) Non-combustible insulation types may be required by local regulations.
2) If external insulation is hydrophilic a WRB overlay is required for rain protection.
3) If external insulation is hydrophobic a WRB may not be required.
1 of 2
Title: Mass Timber Skylight Conection
Variation 1
ID: W4571-1 Issued: 29/03/2023 Revision:
© This drawing is the property of Pro Clima NZ Ltd &/or Pro Clima Australia Pty Ltd and must not be copied without permission. This drawing is a guideline only and subject to change without notice.
Thermal and hygrothermal performance should match specific design, materials and climate requirements. These can be confirmed by hygrothermal analysis using software e.g. WUFI®. Structural, fire and
www.proclima.co.nz acoustic engineering design and the incorporation of building services (plumbing and electrical) should be signed-off by a suitably qualified engineer to ensure compliance with all health and safety
www.proclima.com.au requirements.
W4571-2 Pro Clima - Mass Timber Skylight Connection - 3D
Variation 1

Scale 1:10 @ A4 paper

Water deflector

TESCON EXTORA®
PROFIL alt. also
TESCON EXTORA®
Skylight

Vertical Batten

pliable building membrane


(underlay), pro clima High-performance vapor
SOLITEX MENTO® family retardant membrane
pro clima INTELLO® plus
Vapour permeable
fibrous insulation*
Airtight bonding with pro clima
Cross laminated TESCON EXTORA®
timber element
Full-surface adhesive air
sealing membrane with
pro clima SOLITEX EXTASANA
ADHERO®

*Notes:
1) Non-combustible insulation types may be required by local regulations.
2) If external insulation is hydrophilic a WRB overlay is required for rain protection.
3) If external insulation is hydrophobic a WRB may not be required.

2 of 2
Title: Mass Timber Skylight Conection - 3D
Variation 1
ID: W4571-2 Issued: 29/03/2023 Revision:
© This drawing is the property of Pro Clima NZ Ltd &/or Pro Clima Australia Pty Ltd and must not be copied without permission. This drawing is a guideline only and subject to change without notice.
Thermal and hygrothermal performance should match specific design, materials and climate requirements. These can be confirmed by hygrothermal analysis using software e.g. WUFI®. Structural, fire and
www.proclima.co.nz acoustic engineering design and the incorporation of building services (plumbing and electrical) should be signed-off by a suitably qualified engineer to ensure compliance with all health and safety
www.proclima.com.au requirements.

You might also like