HOT ROD &

EARLY MUSCLE

2023-2024
COMPONENTS FOR CARS
FROM THE 1930'S-1970'S
1 2023 - 2024 HOT ROD AND EARLY MUSCLE
Rat rods, hot rods, custom classics, and early muscle cars – they inspire an excitement and a yearning
for a time when engine tuning was done with a wrench and a screwdriver instead of a laptop. Welding
was often considered a critical skill for doing your own bodywork, and chrome was king. We get that
feeling. That’s why our latest Hot Rod and Early Muscle catalog features components for vehicles from
classic 1930’s hot rods all the way through the muscle cars of the 60’s and 70’s.

2023 - 2024 HOT ROD AND EARLY MUSCLE 1

MANUFACTURERS INDEX

ACE Racing Clutches........................ 3 Energy Release.............................. 190 MOMO............................................ 321 Sparco..........................................467

ACCEL.............................................. 4 Energy Suspension........................ 185 Mopar Performance...................... 324 SPC Performance..........................474
AED Performance............................. 3 Factory Canopies.......................... 192 Moroso Performance.....................326 Specialty Products Co.................. 469
AEM Performance Electronics........ 23 FireAde........................................ 200 Moser Engineering....................... 340 Stage 8 Fasteners.........................477
Aeromotive....................................... 8 FiTech Fuel Injection..................... 194 Mothers........................................ 340 Stainless Works.............................478
Aeroquip Perforrmance/Eaton........ 12 Flaming River................................ 196 Motive Gear................................... 341 Steeda...........................................476
AFCO Racing Products................... 22 Flatline Barriers............................ 200 Motive Products............................339 Stewart Components.....................477
Alan Grove Components................. 25 Flex-A-Lite.................................... 201 Motul............................................ 342 StopTech.......................................477
Aldan American.............................. 26 Flowmaster Exhaust..................... 204 Mr. Gasket Co............................... 345 SuperTrapp.................................. 480
Allstar Performance........................27 Flowtech Exhaust......................... 208 MSD Performance......................... 350 Sweet Manufacturing....................479
Amalie Oil........................................76 Ford Performance......................... 210 New Vintage USA......................... 360 Taylor Cable Products.................. 480
American Autowire........................... 5 Fragola Performance Systems....... 213 Nitrous Express.............................358 TCI Automotive............................. 482
American Racing Wheels................ 82 FRAM Filters.................................. 221 Nitrous Oxide Systems................. 364 Ten Factory.................................. 482
Antigravity Batteries.......................78 FST Carburetors.............................191 NOCO............................................362 Thermo-Tec/Cool It...................... 492
ARP Fasteners.................................79 Fuel Air Spark Technology............. 193 Northern Radiator......................... 361 Tilton Super Starter...................... 492
Autolite.......................................... 90 G Force Crossmembers................. 221 Odyssey Battery............................366 Torco Racing Oils.......................... 496
AutoLoc......................................... 86 Gibson Performance Exhaust....... 223 Optima Batteries...........................365 Total Cost Involved....................... 498
AutoMeter Performance................. 82 Global West Suspension............... 223 Oracle Lighting..............................366 Total Power Batteries................... 504
B&M............................................... 94 Gorilla Automotive Products......... 224 Painless Performance Products.....369 Trans-Dapt................................... 484
Baer Brake Systems........................97 Grant Steering Wheels.................. 225 Patriot Exhaust Products..............376 Tremec Transmissions................. 495
BBK................................................ 90 Green Filter.................................. 230 Penngrade Motor Oil......................383 Trick Flow Specialties................... 496
Be Cool Radiators........................... 98 Griffin Radiator..............................233 Performance Automatic................368 Tuff-Stuff..................................... 498
BedRug.......................................... 98 Grip Lock Ties.............................. 234 Performance Distributors..............388 Turbosmart.................................. 504
Belltech.......................................... 94 GRYPMAT......................................233 Perma-Cool.................................. 380 UMI Performance.......................... 506
Billet Specialties............................ 99 GT Performance........................... 230 Permatex.......................................388 Unisteer Performance.................. 505
Blue Print Engines..........................110 H3R Performance......................... 234 PerTronix.......................................386 Valco Cincinnati............................. 512
BMR Suspension............................. 92 Hawk Performance........................235 Phoenix Race Tires....................... 390 Valvoline........................................ 513
Boostane........................................113 Hays............................................. 234 Phoenix Systems...........................379 VDO............................................... 510
Borgeson........................................113 Heat Shield Products.....................235 PJ1................................................393 VHT Paints.....................................511
Borla Exhaust................................ 120 Hedman Hedders...........................237 POR-15......................................... 390 Vibrant Performance..................... 519
Boss Hog Torque Converters............ 3 Heidts Rod Shop............................ 241 Powermaster Performance........... 392 Vintage Air.................................... 514
Bowler Performance...................... 120 Hellwig Suspension...................... 242 Precision Shaft Technologies........368 Vision Wheel.................................525
Bracketeer, The..............................121 Holley........................................... 243 PRO Shocks...................................367 Walbro...........................................527
Braille Battery................................121 Hooker......................................... 252 Pro-Blend......................................393 Weiand......................................... 528
C&R Racing Radiators................... 125 Hoosier Racing Tire.......................256 PROCAR....................................... 394 Weld Racing................................. 529
California Car Duster..................... 122 Hotchkis Sport Suspension...........256 Proforged......................................395 Wilwood Disc Brakes.................... 530
Carter Fuel Systems...................... 122 HP Books...................................... 258 Proform........................................ 400 Wix Racing Filters.........................535
Centerforce Performance Clutch... 123 Hurst Shifters............................... 258 ProSport....................................... 410 Wizards Products......................... 534
Champion Hi-Tech Lubricants....... 124 HushMat....................................... 260 Prothane........................................ 411 Woodward-Fab..............................536
Classic Instruments....................... 126 ICT Billet........................................ 261 Pypes Performance Exhaust.......... 412 Workshop Hero..............................535
Clayton Machine Works.................. 128 IDIDIT............................................266 QA1................................................ 415 XRP...............................................538
Coan Engineering.......................... 125 JAZ Products............................... 270 Quick Fuel Technology................... 421 XS Power.......................................539
Coker Tire..................................... 129 JBA Performance Exhaust............. 271 Quick Time....................................427 Yukon Gear & Axle.........................539
Cold Case Radiators...................... 130 JET Performance Products........... 271 Quick Time Performance...............427 ZEX.............................................. 540
Competition Engineering............... 129 Keep It Clean.................................272 QuickCar Racing Products............ 423
Corsa Performance....................... 132 KONI..............................................273 R & M Specialties.......................... 450
Covercraft..................................... 132 Kool Mat........................................273 Race Ramps................................. 438
CTEK Power.................................. 123 KYB Shocks...................................274 RPC.............................................. 428
Currie Enterprises......................... 134 Lakewood Industries.....................275 Ram Clutches................................ 441
CVR Performance.......................... 133 Lecarra Steering Wheels...............277 Ratech......................................... 442
Cyclo Industries..............................131 LEED Brakes.................................277 Red Line Synthetic Oil.................. 443
DANA/SPICER............................... 134 Lifeline Battery............................. 285 Rekudo......................................... 445
Demon Carburetion....................... 142 Liquid Glow.................................. 285 Remflex Exhaust Gaskets..............447
Derale Performance...................... 143 Lizard Skin................................... 286 Retro Bright................................. 446
Design Engineering Inc.................. 135 Loctite......................................... 286 Richmond Gear............................. 448
Detroit Locker/Eaton Posi............. 142 Lokar Performance Products........ 290 Ridetech....................................... 452
Detroit Speed................................ 148 Lucas Oil Products....................... 299 Right Stuff Detailing..................... 456
Doug's Headers...............................151 M&H Racemaster.......................... 302 Ringbrothers................................. 451
Drake, Scott.................................. 153 Mac's Custom Tie-Downs.............. 303 Royal Purple Synthetic Oil............. 459
Driven Racing Oil........................... 156 Magnaflow Exhaust...................... 305 Russell Performance..................... 461
Dupli-Color.................................... 160 March Performance Pulleys...........307 S-A Design Books......................... 463
Dynamat........................................ 162 Maxima Racing Oils........................ 310 SafeTBoy Products....................... 463
Dynomax Performance Exhaust..... 163 McGard.......................................... 313 Sanderson Headers...................... 464
Earl's Performance Products......... 166 Mcleod Racing............................... 314 SCE Gaskets................................. 464
Edelbrock...................................... 174 Mechman Alternators.................... 314 Setrab Oil Coolers..........................467
EGGE Machine Company................ 189 Mickey Thompson Tires................. 316 Seymour Paints............................ 466
Eibach Springs.............................. 166 Milodon......................................... 318 Snow Performance....................... 468
ENEOS Oil...................................... 188 Mobil 1........................................... 319 SPAL............................................ 464

2 2023 - 2024 HOT ROD AND EARLY MUSCLE

Boss Hog High-Performance Torque Converters
High-performance torque converters stall between 2,200 and 4,200 RPM, depending on
application. A moderate cam profile, headers, intake/carb, and rear end gear upgrades are
recommended for proper stall. Features include industrial bearings, welded fins, welded at
the seams (not brazed), and aircraft aluminum thrust washers. Hand-built, tested,
and balanced.
Part No Description
GM TH350 1968-81, Non-Lock Up
ATC47012 Night Stalker, Level 2, 10-1/2" BC, 2200-2800 Stall
ATC47013 Street Bandit, Level 1, 10-1/2" BC, 2800-3200 Stall
TF-727 1967-Up, Non-Weighted, Non-Lock Up, 24-Spline
ATC54093 Street Bandit, Level 2, 10" BC, 2200-2800 Stall

Street King Dual Disc Clutch Kits

Versatile clutches offer smooth engagement and an extended life, yet can handle up to
800 ft./lbs. of torque. Clutch assemblies bolt directly to flat OEM-style flywheels, and
feature a curved finger diaphragm design with patent-pending fulcrum ring and dual
sprung hub-style clutch discs. Sold complete with mounting bolts, alignment and set-up
tools, and complete instructions. Kits listed include HP organic clutches.
Part No. Description
ACERSK-314S 1986-95 Ford Mustang 5.0L, 10" Clutch, 1-1/16" 10-Spline
ACERSK-314S

Ultimate Performance Carburetor Kits Fuel Pressure Gauges

AED kits cover most Holley performance carburetors. 1-1/2" diameter gauges are available
Each includes reusable bowl in 0-15 PSI and 0-30 PSI versions. The
and metering block gaskets, 1/8"NPT male fittings allow mounting on
standard and high-flow 0.110" AED fuel line kits.
needle and seats, nylon reusable Part No. Description
needle and seat gaskets, bowl AED6100 0-15 PSI Pressure Gauge
screw gaskets, all new brass idle AED6101 0-15 PSI Pressure Gauge, Liquid-Filled
mixture screws, needle, seat AED6102 0-30 PSI Pressure Gauge
nuts, screws, accelerator pump
squirter check valves, no-leak
fuel inlet gaskets, and gasketed Adjustable Jet Plates
vacuum secondary diaphragm. Compatible with all fuel lines and
Part No. Description
bowl screws. Machined from 6061
AED2300 350-500 Holley 2-Barrel Kit billet aluminum for side-hung and
AED4150 390-950 Holley Double Pumper Kit center-hung float bowls.
AED4160 600-950 Holley Vacuum Secondary Kit Part No. Description
AED4165 650-800 Holley Spread-Bore Double Pumper Kit AED6320 For Side-Pivot Single Bowl
AED4175 650-800 Holley Spread-Bore Vacuum Secondary Kit AED6330 For Center-Pivot Dual-Feed Bowl

Stainless Fuel Line Kits

Designed for 4150 and 4160 style carburetors, the lines are polished 304 stainless steel, equipped
with anodized AN bowl fittings, couplers, and a female 1/8"NPT port for accommodating a fuel
pressure gauge. All fittings and gaskets are included. Lines terminate with a male -6AN.
Part No. Description
AED60945 Polished Stainless Carburetor Line Kit (4150)
AED60946 Polished Stainless Carburetor Line Kit (4160)

2023 - 2024 HOT ROD AND EARLY MUSCLE 3

Performance Replacement GM HEI In-Cap Super Coils
Distributors ACL140003
ACCEL electronics, all new Install an ACCEL In-
components, and direct plug- Cap HEI Super Coil for
in factory-type connectors quicker starts, better
make Performance acceleration, smoother
Replacement distributors the idle quality and great top
perfect choice for street machines. end. Silicone coil gasket,
Legal in all 50 states. carbon brush, and brush
Part No. Description spring are all included. Will not affect ECM.
Chevrolet All V8 Engines (Except Description
348, 409) with HEI, Standard Deck HEI Super Coil with Red and White Wires,
ACL59107C
Height, Complete Ready-to-Run *Fits Most 1973-91 Buick, Olds and Pontiac V8s
Unit, Sold with Coil and Coil Cover
* HEI super coil wire colors must match original HEI coil
Ignition Accessories wire colors.
Part No. Description
ACL8122
Replacement Cap and Rotor
for HEI Distributor
GM HEI Remote-Mount Super Coil
ACL8140C
Super Stock Chrome Coil for ACL140011
Points Ignition The HEI Remote-Mount Super Coil
ACL35361
High-Output GM HEI 4-Pin has optimized low-resistance
Module and high turns-ratio windings
around an M36 high-silicone
Performance Replacement magnetic steel E-core for
Distributor for GM Opti-Spark II ACL8122
higher energy and voltage
output. Fits 1984-95 GM HEI-
ACL59125 equipped cars and is a direct
All new distributor is the perfect replacement for failure- bolt-in, plug-in replacement for Accel, Mallory, Crane,
prone original equipment units. Distributor features a MSD, or Holley CD ignition systems.
polished housing, heavy-duty bushings, high dielectric
strength reinforced cap, brass contacts, balanced rotor,
cross-flow vent design,
HEI Control Module
pin driveshaft seals, and ACL35361
installation hardware. Fits Module fits stock and
the following V8s: Chevy modified 1974-87 GM HEI
1994-1/2 - 96 Caprice distributors to promote high
4.3L/5.7L, Impala SS 5.7L coil output and consistent
LT-1; 1995-97 Camaro 5.7L coil charging.
LT-1/LT-4; 1995-96 Corvette
5.7L LT-1/LT-4; Pontiac 1995- HEI Battery and Tach
97 Firebird 5.7L LT-1/LT-4.
Pigtail Connector
Super Coil ACL170072
Eliminate single
ACL140001 spade-type
Capable of all the hot connectors from
performance spark racing the HEI system on
engines need, the Super Coil can GM cars and trucks with this new pigtail connector. Made
handle any street ignition with from high-temperature plastic to withstand temperature
ease. Produces over 50,000 volts extremes in the engine bay, red and green wires are 10"
to outperform other performance long and easily identify tach and battery circuits.
coils. Extremely reliable, even
in high-temperature engine
compartments, it is the industry’s Heavy-Duty Crimping Tool
most universal 12-volt high- ACL170036
output coil. An excellent crimping tool for
assembly of 7, 8, or 9mm universal
spark plug wire.

4 2023 - 2024 HOT ROD AND EARLY MUSCLE

Universal Super Stock Adjustable Fuel Pressure Regulators
Spark Plug Wire Sets High-quality fuel pressure
Super Stock 8mm silicone regulators stabilize fuel
jacketed wire sets withstand pressure throughout the
450°F temperatures and RPM range. Stock Ford 5.0L
deliver maximum spark for systems operate at 39 PSI,
street applications. Plug while 305 and 350 GM TPI systems are factory set at 45
ends are factory terminated, PSI (except 1985 TPI which is 39 PSI).
but distributor ends must Part No. Description
Straight Boots 90° Boots
be attached at time of ACL74561 1986-93 Ford 5.0L
installation. Standard and HEI-type boots and terminals ACL74566 1994-97 F-Body LT-1, LT-4, 1994-96 Impala SS
are included.
Part No. Description Copper Core Spark Plugs
Straight Boots High-performance
ACL4040 Yellow Wires/Orange Plug Boots Copper Core spark plugs
ACL4040B Blue Wires/Blue Plug Boots provide a hotter spark
ACL4040K Black Wires/Black Plug Boots and faster burn rate for
ACL4040R Red Wires/Red Plug Boots increased horsepower
90 Degree Boots at high RPM’s. One-piece
ACL4041 Yellow Wires/Orange Boots construction plugs
ACL4041B Blue Wires/Blue Boots feature a conventional
ACL4041K Black Wires/Black Boots ground electrode and a
ACL4041R Red Wires/Red Boots Purified alumina insulator
to improve throttle response and fuel economy, while
300 Race Spark Plug Wire Set preventing arcing and misfires. Precision, machine-rolled
threads offer superior thread engagement and protect
ACL7050 cylinder heads. Sold as a four-pack only.
Experience smoother Please call for applications.
running engines and quicker
throttle response. Accel’s
300+ race wire transfers
more current to the spark
plugs and keeps voltage drop
to a minimum resistance of 150
Ohms/foot. 8.8mm fiberglass-
braided, silicone-insulated wire is
compatible with all ignition systems, onboard computers,
and has RFI suppression. Small Block Chevy 262-400 CID
with HEI. Wire routed under exhaust manifolds,

Highway 22 Plus Universal Wiring System Severe-Duty Universal Kit

AAW510760 AAW510564
Loaded with new features and The Severe-Duty kit features a fully sealed 20-circuit
specifically designed to promote fuse box with electronic flasher and 35-amp relay. The
flexibility and creativity in the weatherproof electrical
wiring of electrical systems system also contains a
for street machines, kit cars, sealed, manually resettable
classics, and special interest 200-amp circuit breaker
vehicles. With 22 output protecting the fuse box.
connections, the Highway Main and power harnesses
22 modular panel system come pre-terminated at one
is engineered to add safety and end, and include over 100'
reliability to any wiring job. Designed with many of heat-resistant GXL wire.
innovations, like the only self-locking screw This system will connect to most popular gauge systems
terminal in the industry, heavy 40-amp electric including Dakota Digital, Classic Instruments, and Auto
fan or fuel pump relay, integrated LED flasher, and Meter. Made in USA.
EFI-ECM power feeds for connection to nearly any fuel
injection system.

2023 - 2024 HOT ROD AND EARLY MUSCLE 5

Highway 15 Plus Universal Wiring System Power Plus Integrated Fuse Box Systems
AAW510825 A complete deluxe
A brute of a system in a small integrated fuse box
package, the Highway 15 Plus wiring wiring system that
system shares the same heavy-duty combines a factory-
components as the Highway 22 Plus, style wired fuse box
but is designed for vehicles needing with the benefits
only basic wiring functions. of Autowire’s
famous modular
approach to wiring.
New Builder 19 Series Wiring Kit The installation
AAW510006 begins at the box, then each of the circuits is routed to
Designed for tight its destination. Major branch circuits are connected
wiring spots, this individually utilizing easy to follow instructions. Kit
19-circuit wiring kit includes wiring, fuse box, flashers, headlight and floor
contains a slim ATO- dimmer switches, relays, and tie wraps.
style fuse panel with Part No. Description
mounting pads and an AAW510004 Power Plus 13-Circuit Wiring System
attached fuse panel AAW510008 Power Plus 20-Circuit Wiring System
cover with an internal
label identifying all circuits. Other features include Camaro Headlight Wiring Harness
headlight, dimmer, and ignition switches along with
extra-long wire lengths for custom wiring and steering
AAW500773
column connector/adapter. Made in USA. This headlight wiring harness is designed to fit the 1967
RS Camaro. In addition to headlight and ignition switch
connections, the
Classic Update Series kit also contains
Harness systems connections to
include the original the Rally Sport
headlight and parking electric motors,
light switch, boot, limit switches,
tube, grommets, and relay panel.
and light sockets as Made in USA.
required. Completely
new 18-fuse, 21-circuit
fuse box system is AAW500661
All Copper”
ready to install. All connectors are provided for original Grounding Kit
lighting, fuel sender, optional back-up lights, license plate AAW500717
lights, and even a third brake light. Harness systems are
ready to connect to updated SI alternator and original
coil/distributor or most aftermarket setups.
Part No. Description
AAW510267 1953-62 Chevy Corvette
AAW510612 1963-67 Chevy Corvette
AAW510717 1968-76 Chevy Corvette
AAW500661 1967-68 Chevy Camaro
AAW500686 1969 Chevy Camaro
AAW510034 1970-73 Chevy Camaro
AAW510140 1962-67 Chevy Nova The “all copper” system eliminates use of the frame rail
AAW500878 1969-72 Chevy Nova as the ground, using instead a series of three grounding
AAW500981 1964-67 Chevy Chevelle boxes connected by 6-gauge copper cables. The kit
AAW510158 1968-69 Chevy Chevelle includes 20 coils of wire marked with circuit function
AAW510105 1970-72 Chevy Chevelle
identification every five inches, 6 terminal lugs, and
AAW500423 1955-56 Chevy
a battery terminal crimping tool, Boxes are available
AAW500434 1957 Chevy
separately.
AAW500481 1955-59 Chevy Truck
AAW510089 1969-72 Chevy Truck
AAW510125 1964-66 Ford Mustang Crimper Set
AAW510055 1967-68 Ford Mustang AAW510587
AAW510063 1961-64 Impala Heavy-duty crimper set allows
AAW510188 1964-67 GTO professional-quality crimps. Includes
AAW510303 1953-56 Ford Pick-Up a single crimper for wire sizes 20-14
AAW510260 1961-66 Ford Pick-Up gauge, and a double crimper for wire
AAW510289 1970-74 Challenger sizes 18-10 gauge or for terminals
receiving a two-wire connection. Steel
with comfort-grip handles.

6 2023 - 2024 HOT ROD AND EARLY MUSCLE

Electric Fan Relay American Autowire Ignition Switch Lock
System Cylinder with Keys
AAW500479 AAW500672
System includes a 40-amp Replace your worn or
relay and wiring. damaged ignition lock
cylinder with a quality
Electric Fan Switch replacement from American
Autowire. Made to meet or
AAW500491 exceed the specs of the
Activates fan at 195°F and original, the lock cylinder features a chromed
turns fan off at 180°F. key grip and bezel, and includes two keys. Fits
Chevrolet models from 1955-1964.
Headlight Switch
AAW500332 Toggle Turn Signal Switch Kit
Premium-quality AAW500148
headlight switch Kit controls both the turn signal
assembly, protected and brake light circuits, and is sold
by an internal, 26-amp complete with toggle switch, 1/4"
auto-resetting circuit female terminals, connectors,
breaker, includes off/ and necessary instructions.
parking light/headlight
functions. Assembly
requires a 5/8" hole
Courtesy Light
and is retained with included 7/16"-28 nut. Sold complete Connection Kit
with aluminum actuating knob, shaft, collar, terminals, AAW500081
and complete instructions. Kit connects two under-dash
lamps to headlight switch and
Headlight Switch door switches. Has sockets,
AW500341 mounting brackets, and
terminals for bullet, blade, or
Complete with
screw-type door switches.
aluminum knob,
shaft, collar,
connector, and
terminals. 7/16"-28
nut. Requires 5/8" Waterproof In-Line Fuse Kit
hole. AAW500094
Cap has mounting tab. Complete
Switch Knob with terminals and 30-amp
AAW500236 fuse.
Knob is 3/4" diameter, tapered to
1" long, 3/16" shaft,polished aluminum
w/set screw. Self-Tapping Door Jamb
Switch
Ignition Switch AAW500100
AAW510805
4-position switch has 1/4"
blade connectors and
includes square keys. GM HEI Distributor Ignition
Terminal
Ignition Switch AAW500204
AAW500006 For GM HEI ignition connector
Universal 4-position ring terminal with female terminal.
connections. Complete with keys.
Needs 3/4" hole.

2023 - 2024 HOT ROD AND EARLY MUSCLE 7

GM HEI Tach Connector Battery Junction Blocks
Housing Ideal for adding accessories,
connection point for battery
AAW500205 power circuits is fully
For GM HEI tachometer, includes insulated. Includes 10-32 stud
lead connector with terminal. and nut terminal. AAW03882795 AAW500155
Part No. Description
Professional Grade Terminal and Connector Kit AAW03882795 Standard Battery Junction Block
AAW510643 AAW500155 Heavy-Duty Battery Junction Block

Convenient kit includes 250 pieces

of the most common terminals and Indicator Lights
connectors used for repairing and LED indicator lights have snap
replacing wiring connections. Comes mounts and fit into a 5/32" hole.
with durable compartmentalized case Raised lens and black bezel.
complete with helpful identification Part No. Description
diagram of contents. AAW500215 Red
AAW500214 Green
AAW500213 Amber
AAW500401 Blue

Stealth Fuel Cells Stealth Fuel Tanks

Direct replacement stamped steel fuel tanks feature

built-in Stealth 340 electric fuel pumps and billet
aluminum hanger assemblies. Fuel tanks incorporate
specialized internal baffling to control fuel slosh, even
during the most extreme driving conditions. Tanks also
AFS18660 include GM 0-90 Ohm fuel level sending units, pre-pump
filter socks, and AN O-ring boss pressure, return, and
vent ports. Tanks are fully assembled.
Part No. Description
Cells have universal 0-90 Ohm fuel level sending units, Chevy
two -10AN roll-over vent/valves, and -8AN return ports. AFS18499 1955-57 Bel Air 16-Gal. Tank
Available in 15-gallon (18"L x 20"W x 10"H) and 20-gallon AFS18417 1964-67 Chevelle/Malibu
(24"L x 20"W x 10"H) capacities, both with 12-bolt flush AFS18404 1969 Chevelle/Malibu
mount lids and 100-micron stainless filters. AFS18402 1970-72 Chevelle/Malibu
Part No. Description AFS18457 1967-68 Camaro/Firebird
AFS18660 15 Gallon, A1000 Pump AFS18458 1969 Camaro/Firebird
AFS18661 20 Gallon, A1000 Pump AFS18428 1970-73 Camaro/Firebird
AFS18662 15 Gallon, Eliminator Pump AFS18435 1974-77 Camaro
AFS18438 1978-81 Camaro
AFS18433 1970 Nova
AFS18436 1973-74 Nova
Dodge
AFS18442 1970-74 Challenger
AFS18443 1970-74 Barracuda
AFS18444 1970-76 Dart/Duster
Ford
AFS18497 1964-68 Mustang

8 2023 - 2024 HOT ROD AND EARLY MUSCLE

GEN II Stealth Tanks Fuel Filters with Integrated Male-Flare Ends
The new GEN II Stealth tanks These new billet aluminum
feature a plug-and-play fuel fuel filters are machined
pump with fuel level sending with the male flare ends
unit and patented Phantom as an integral part of the
baffle system, designed to housing. The purchase
precisely control fuel flow of separate fittings for the inlet and outlet is no longer
around the pump and prevent fuel starvation, even under necessary. The filter housings are 2" OD and are available
the most extreme driving conditions. Compatible with with -6, -8, or -10AN male fittings, as well as either a
both carbureted and EFI applications, the fuel pump is 10-micron microglass, a 10-micron fabric, a 40-micron
plumbed to a billet end cap in the factory outlet location stainless mesh, or a 100-micron stainless mesh filter
for easy installation. Available with 340 lph fuel pumps element. Bright-dip black.
for most applications and 200 lph fuel pump on select Part No. Description
applications. -6AN Male Ends
Naturally Aspirated Forced Induction AFS12345 10-Micron Microglass Element
200 lph 340 lph 200 lph 340 lph AFS12347 10-Micron Fabric Element
AFS12348 40-Micron Stainless Mesh Element
EFI 600hp 850hp 450hp 700hp
GAS AFS12349 100-Micron Stainless Mesh
Carb 750hp 1000hp 600hp 850hp
-8AN Male Ends
EFI — 595hp — 490hp
E85 AFS12375 10-Micron Microglass Element
Carb — 700hp — 595hp
AFS12377 10-Micron Fabric Element
200LPH 340LPH Applications AFS12378 40-Micron Stainless Mesh Element
— AFS18497 1964-68 Mustang AFS12379 100-Micron Stainless Mesh
— AFS18447 1969-70 Mustang -10AN Male Ends
— AFS18499 1955-57 Chevy AFS12385 10-Micron Microglass Element
— AFS18431 1966-67 Chevy II Nova AFS12387 10-Micron Fabric Element
— AFS18433 1970 Chevy Nova AFS12388 40-Micron Stainless Mesh Element
— AFS18432 1971-72 Chevy Nova AFS12389 100-Micron Stainless Mesh
— AFS18436 1973-74 Chevy Nova
— AFS18428 1970-73 Camaro/Firebird 2" Billet Filter Bracket
AFS18157 AFS18457 1967-68 Camaro/Firebird
— AFS18458 1969 Camaro/Firebird AFS12305
— AFS18435 1974-77 Camaro 1974-78 Firebird Can be used with any 2" OD filters.
— AFS18438 1979-81 Camaro 1979-81 Firebird
— AFS18471 1982-92 Camaro/Firebird 2" Steel Filter Bracket
— AFS18417 1964-67 Chevelle & Malibu
— AFS18404 1968-69 Chevelle & Malibu
AFS12701
— AFS18402 1970-72 Chevelle & Malibu, 70 Monte Carlo Spring steel fuel filter bracket with
— AFS18406 1964-67 Buick Skylark durable rubber coating allows for simple
— AFS18401 1968-69 Olds Cutlass & Buick Skylark installation and easy maintenance.
— AFS18403 1970-72 Cutlass, 70 Skylark
— AFS18405 1971-72 Skylark, GS & GS 455 Billet Canister-Style Filter
— AFS18407 1971-72 GTO & LeMans
— AFS18421 1965-67 Pontiac GTO & 1966-67 LeMans
AFS12317
— AFS18442 1970-74 Challenger
Capable of supplying fuel to the stoutest
— AFS18443 1970-74 Barracuda
street machines and withstanding
— AFS18444 1970-76 Dart/Duster
pressure up to 200 PSI, the SS Series
canister filter has 3/8"NPT inlet and outlet
ports and is CNC-machined from aluminum
SS Series Billet In-Line Filter billet and red anodized for beauty and
AFS12303 protection. Filter element is 10-micron with
Housing is 3-1/2" long x 1-1/4" minimal pressure drop.
diameter with 3/8"NPT ports
and a 40-micron replaceable
element. 100-Micron Canister Fuel Filters
AFS12319
Billet In-Line Filters Fuel filter assemblies feature unmatched
Housings are 5-1/2" x 2" dia. flow, ease of installation, and new finishes.
with -10AN ports and a high- Designed for premium protection of fuel
flow replaceable element. system components. Cleanable stainless
Flows up to 2,000 lb/hr with steel element.
minimal pressure drop.
Part No. Description
AFS12301 10-Micron (Fine) Replaceable Element (After Pump)
100-Micron (Coarse) Cleanable Stainless Steel Element
AFS12304
(Before Pump)

2023 - 2024 HOT ROD AND EARLY MUSCLE 9

Carbureted Fuel Pumps 200 Stealth Fuel Pump
The perfect fit for 200-750 HP The 200 Stealth pump is a
engines. The body and motor high-performance replacement
heat sink are made of anodized for OEM, in-tank electric fuel
aluminum. The motor housing pumps. It uses stock wiring and
is chrome plated for protection mounting provisions for easy plug-and-play installation.
and good looks. The SS Series Fits most vehicles where a Walbro 255 is used.
pumps provide 15 PSI and flow Part No. Description
over 140 GPH with low amperage Chevrolet
draw. SS Series pumps require AFS18071 1982-92 Camaro
either a deadhead or bypass- style AFS18072 1993-87 Camaro
regulator. The HO (High-Output) Series pump is internally
regulated to 7 PSI, draws less than 5 amps at 12 volts and 340 Stealth Fuel Pump
flows over 900 GPH at 5 PSI (no regulator needed on most The 340 Stealth pump is a high-
carbureted applications). performance replacement for
Part No. Description OEM in-tank electric fuel pumps. It
SS Series boasts a flow rate approximately 30%
AFS11203 Pump with 3/8"NPT Ports higher than stock units and works with stock wiring and
AFS11213 Pump with -8AN Ports mounting provisions. Fits most vehicles where a Walbro
HO Series 255 is used. Three configurations are available.
AFS11209 Pump with 3/8"NPT Ports,
Part No. Description
AFS11540 Center Inlet
A1000 Fuel Pump AFS11541 Offset Inlet
AFS11101 AFS11541 Offset Inlet/In-Line with Offset Outlet
Aeromotive’s most popular AFS11542 Offset Inlet/In-Line with Outlet
fuel pump is new and AFS11569 Center Inlet/Offset Outlet
improved. Durable, reliable, Chevrolet
attractive, and supports 1985-92 Camaro 5.0 & 5.7L, 1985-92 Corvette 5.0
AFS11569
& 5.7L
carbureted systems up to 1500
AFS18073 1982-92 Camaro
horsepower and forced air applications
AFS18074 1993-97 Camaro
with up to 1200 horses. Perfect for a street-driven car
Ford
that sees weekend drag strip action. Pump has -10AN
AFS11540 1985-97 Mustang (except Cobra)
inlet and outlet ports. May also be used on carbureted
AFS11542 1996-1997 Corvette 5.0 & 5.7L
applications. Pontiac
AFS11569 1985-92 Firebird 5.0 & 5.7L
Brushless Fuel Pump Series
Brushless motors use less power, generate less heat, Double & Triple 450 Fuel In-Tank Fuel Pumps
and last longer than conventional motors. Aeromotive’s
new A1000 series of fuel pumps combine a brushless
for 2016-20 Camaro
motor with Aeromotive’s proven roller vane pumping The Double and Triple 450
mechanism to provide excellent performance and fuel pump systems come
reliability. Available in round or signature style external with two or three 450 LPH
pumps, or a 10” drop-in or universal in-tank format. pumps for ground-shaking
Suitable for gas or E85 applications. performance. The modular
design will fit almost any
Part No. Description
fuel tank, while the tandem
External
pumps provide an on-
AFS11124 Round
demand system, reducing
AFS11183 Signature
the amount of returned fuel
In-Tank
as well as lowering the tank
AFS18023 10" Drop-In
temperature, eliminating
AFS18668 Universal
vapor lock and cavitation.
For 2016-20 Chevy Camaro
Eliminator Fuel Pump and 2016-19 Cadillac CTSV/
AFS11104 ATSV applications. Sold as
The Eliminator is best for a kit.
forced air EFI or carbureted Part No. Description Max HP
applications up to 1700 AFS18075 Double 450 Fuel Pump System 2600
horsepower and naturally AFS18076 Triple Fuel Pump System 3900
aspirated EFI applications up
to 1900 horses. Unequalled durability
on the street or strip. New improved “Dual chamber”
pump uses Aeromotive’s exclusive aerospace composite
technology. Black anodized pump has -12AN inlet and
-10AN outlet ports.

10 2023 - 2024 HOT ROD AND EARLY MUSCLE

Phantom 340 Universal FI OEM Returnless Rail
In-Tank Fuel Pump System Stealth Fuel System
AFS18688 AFS17351
Aeromotive’s Phantom 340 fuel Designed for both
system makes it possible to early and late
mount a high-performance fuel model vehicles
pump inside virtually any fuel tank, including the factory using an OEM
one. The 340 uses an innovative modular design (fuel returnless fuel
pump and baffle/basket) with an internal baffle to control injection system. This kit includes billet 3/8" quick-
fuel slosh and keep the pump submerged. Foam can be connect fuel rail adapters, X1 EFI regulator and all
cut to fit 6-in. to 10-in. tall tanks. The system supports required fittings, 0-100 PSI liquid filled pressure gauge
700 HP EFI supercharged, and 1000 HP carbureted and and -6AN fuel filter with 10 micron element. Made in USA.
supercharged. The pump has three ORB-06 Ports –
supply, return and vent.
EFI Throttle Body Stealth Fuel System
Dual Phantom System AFS17352
With 4-barrel
AFS18309 style EFI
The Dual phantom comes loaded throttle
with two 340 LPH pumps, an bodies gaining
additional set of electrical popularity this
bulkheads, and a large capacity foam and bladder in Stealth fuel
a modular design to fit almost any fuel tank. The dual system kit contains all the necessary parts to complete
pumps provide on demand system which reduces the the installation. The kit features a black anodized
amount of returned fuel as well as tank temperature aluminum X1 EFI regulator with -8AN fittings, -6AN
eliminating vapor lock and cavitation. Supports up to 10-micron fuel filter and 0-100 PSI liquid filled pressure
2,000 HP applications. Sold as a kit. gauge. Made in USA.

Phantom Flex System A750 Electric Fuel Pumps

Billet aluminum construction,
AFS18310 in-line electric fuel pumps
The Phantom Flex provides are compatible with EFI or
easy installation for E85 fuel carb applications. Compact,
use in virtually any fuel tank powerful pumps can feed
for EFI and carbureted applications. The system includes fuel for EFI applications
a 450 LPH Phantom electric fuel pump, a large foam up to 700 horsepower or carbureted vehicles up to
bladder designed combat fuel slosh while feeding the 900 horsepower. Fully submersible pumps include
pump, and a universal high-flow pre-pump filter. Black –8AN O-ring Boss inlet ports and –6AN O-ring Boss
anodized top hat with three -6AN ORB ports supply/ outlet ports. EFI applications, use regulator AFS13101
return/vent and wiring connections. Sold as a kit. or AFS13109, while carbureted applications require
regulator AFS13204 or AFS13301. Choose from black or
Phantom Wiring Kit red anodized finished pumps.
AFS16307 Part No. Description
AFS11103 A750 Electric Fuel Pump, Black
The kit includes automotive relay,
AFS11106 A750 Electric Fuel Pump, Red
circuit breaker, 1' of 10-ga. of black
ground wire, 4' of 10-ga. red battery wire, 10'
of 16-ga. red trigger wire, 18' of fuel pump power/ground X1 Fuel Regulators
wire, cable ties, self-drilling screws, terminal crimping The X1’s new design features a
tool, and 5/16" nut driver. lightweight compact design, 33%
lighter, with larger (3) -8AN inlet/
outlet/return ports to accommodate
Carbureted Stealth Fuel System increased flow as well as a first ever
AFS17256 fully interchangeable diaphragm,
This return-style fuel spring, and seat. Built with legendary
system is designed Aeromotive 1/8"NPT gauge port, 1:1
for single carbureted boost reference for EFI and carbureted
applications with a applications supporting up to 2,000 HP.
single inlet. Kit includes Part No. Description
black anodized aluminum X1 .188" Seat, 35-75 PSI, Use with 11137 EFI Pump up
AFS13303
regulator, 10-micron fuel filter, 0-15 PSI liquid filled to 11101 A1000, Red Anodize
pressure gauge, and all needed -8AN ORB fittings. Made AFS13304
.313" Seat, 3-15 PSI, Use with 11137 EFI Pump up
in USA. to 11104 Eliminator, Black Anodize
.313" Seat, 35-75 PSI, Use with 11104 Eliminator up
AFS13305
to 11102 Pro Series, Black Anodize

2023 - 2024 HOT ROD AND EARLY MUSCLE 11

Universal Bypass Regulator EFI Bypass Regulator
AFS13301 AFS13129
For carbureted or EFI systems, the base Engineered exclusively for EFI
pressure is adjustable from 3 to 20 PSI applications, bypass style regulator
with standard spring or 20 to 60 PSI is capable of supporting applications
with high-pressure spring (included). with up to 1,000 horsepower. Compact
Compatible with SS Series pump, all and lightweight, billet aluminum
ports (one inlet/three outlets, one return construction regulator has an
port on bottom) are 3/8"NPT. When referencing boost, adjustable, 30-70 PSI base pressure, includes
pressure will rise on a 1:1 ratio. The bypass-style regulator (2) -6AN O-ring boss inlet/outlet ports, (1) -6AN O-ring
requires a return line to be installed from the bottom of boss return port and (1) 1/8"NPT gauge port.
the regulator to the top of the tank.

Adjustable Carbureted
Regulators
Two regulators specifically for A1000 EFI Bypass Regulators
carbureted street engines are EFI regulator for medium to high HP
adjustable from 5-12 PSI and each engines is adjustable from 40-75 PSI.
reduces pressure creep by resetting Compatible with gas and alcohol.
after the needle shuts down. Each has Part No. Description
a 1/8"NPT pressure gauge port. Two -10AN ORB Inlet Ports, One ORB -6AN Return Port and One
AFS13101
Part No. Description 1/8"NPT Gauge Port, Red
AFS13201 Carbureted Adjustable Regulator with -6AN Ports Two -6AN ORB Inlet Ports, One ORB-6 Return Port and One
AFS13109
AFS13204 A1000 Carbureted Adjustable Regulator with -6AN Ports 1/8"NPT Gauge Port, Red
AFS13205 Carbureted Adjustable Regulator with 3/8"NPT Ports AFS13138 Two -6AN ORB Inlet Ports, One -6AN ORB Outlet Port, Black
AFS13139 Two -8AN ORB Inlet Ports, One -6AN ORB Outlet Port, Black
Compact EFI Regulator AFS13140 Two -10AN ORB Inlet Ports, One -6AN ORB Outlet Port, Black

Compact EFI regulator for up to 1000HP

engines is adjustable from 30-70 PSI. Unit Fuel Pressure Gauge
has removable -6AN male fittings for Liquid-filled,1-1/2" diameter
inlet and outlet and a 1/8"NPT gauge face, and includes integral
port. pressure relief valve.
Part No. Description Part No. Description
AFS13105 Red and Black AFS15632 0-15 PSI
AFS13136 Black AFS15633 0-100 PSI

AQP Racing Hose Bulk Firesleeve and Support Clamps

AQP racing hose is light, Listed in the right
flexible, and its stainless columns of the chart
steel cover resists corrosion and abrasion. Hose can are the part numbers
operate at higher temperatures for longer periods of time for Firesleeve and support clamps for each
and is compatible with petroleum or synthetic lubricants, size hose. Firesleeve protects hose from fire
hydrocarbon fuels, and engine coolants. Sold in 3, 6, 10, damage and can be used as an insulator to
15, and 20-foot lengths. Aeroquip is the only performance keep fuel lines cool. Support clamps are the
plumbing supplier to manufacture their own hose and professional method to secure Aeroquip hose
fittings. to chassis, frame rails, etc.
AQP Racing Hose Firesleeve Support Clamp
Dash Size ID OD
3 Ft. Length 6 Ft. Length 10 Ft. Length 15 Ft. Length 20 Ft. Length Part No. Part No.
-4 .22" .44" AERFCA0403 AERFCA0406 AERFCA0410 AERFCA0415 AERFCA0420 AERFCS09XX* AERFCM3482
-6 .34" .55" AERFCA0603 AERFCA0606 AERFCA0610 AERFCA0615 AERFCA0620 AERFCS11XX* AERFCM3484
-8 .44" .65" AERFCA0803 AERFCA0806 AERFCA0810 AERFCA0815 AERFCA0820 AERFCS12XX* AERFCM3485
-10 .56" .80" AERFCA1003 AERFCA1006 AERFCA1010 AERFCA1015 AERFCA1020 AERFCS14XX* AERFCM3487
-12 .69" .94" AERFCA1203 AERFCA1206 AERFCA1210 AERFCA1215 AERFCA1220 AERFCS18XX* AERFCM3488
-16 .88" 1.15" AERFCA1603 AERFCA1606 AERFCA1610 AERFCA1615 AERFCA1620 AERFCS20XX* AERFCM3536
-20 1.13" 1.41" AERFCA2003 AERFCA2006 AERFCA2010 — AERFCA2020 — AERFCM3538

* Last two digits for Firesleeve dictate length. For example AERFCS0906 is a 6' length. Firesleeve available in 3', 6', and 10' lengths only.

12 2023 - 2024 HOT ROD AND EARLY MUSCLE

Reusable Fittings for Aeroquip Racing Hose
Aeroquip steel or anodized aluminum reusable fittings are engineered to match Aeroquip hose tolerances to provide
excellent performance and service. High-quality one-piece fitting has no braze joints to break or leak. When methanol and
mixtures are used, corrosion can occur. Check the fittings regularly for signs of corrosion and flush system after use.

Straight 30° Elbow 45° Elbow 60° Elbow 90° Elbow

120° Elbow 150° Elbow 180° Elbow

Blue/Red Blue/Red Black

Nickel-Plated Anodized Anodized Anodized Nickel- Blue/Red Blue/Red Black
Dash Steel Aluminum Aluminum Aluminum Aluminum Plated Anodized Anodized Anodized
Size Swivel Swivel Swivel Non-Swivel Swivel Steel Aluminum Aluminum Aluminum Aluminum
Size Swivel Swivel Swivel Non-Swivel Swivel
Straight
90° Elbow
-4 AERFCM1011 — — — —
-4 AERFCM1031* — — — —
-6 AERFCM1075 — AERFCM1012 — AERFCM4412
-6 — — AERFCM4032 AERFCM1032 AERFCM4432
-8 — — AERFCM1013 — AERFCM4413
-8 — — AERFCM4033 AERFCM1033 AERFCM4433
-10 — — AERFCM1014 — AERFCM4414
-10 — — AERFCM4034 AERFCM1034 AERFCM4434
-12 — — AERFCM1015 — AERFCM4415
-12 — — AERFCM4035 AERFCM1035 AERFCM4435
-16 — — AERFCM1016 — AERFCM4416
-16 — — AERFCM4036 AERFCM1036 AERFCM4436
-20 — — AERFCM1017 — —
-20 — — — AERFCM1037 —
30° Elbow
120° Elbow
-6 — — AERFCM4072 — AERFCM4472
-6 — — AERFCM4042 — AERFCM4442
-8 — — AERFCM4073 — AERFCM4473
-8 — — AERFCM4043 — AERFCM4443
-10 — — AERFCM4074 — AERFCM4474
-10 — — AERFCM4044 — AERFCM4444
-12 — — AERFCM4075 — AERFCM4475
-12 — — AERFCM4045 — AERFCM4445
-16 — — AERFCM4076 — AERFCM4476
-16 — — AERFBM4046† — —
45° Elbow
150° Elbow
-4 AERFCM1021 — — — —
-6 — — AERFCM4052 — AERFCM4452
-6 — AERFCE4022 AERFCM4022 AERFCM1022 AERFCM4422
-8 — — AERFCM4053 AERFCM1053 AERFCM4453
-8 — — AERFCM4023 AERFCM1023 AERFCM4423
-10 — — AERFCM4054 — AERFCM4454
-10 — — AERFCM4024 AERFCM1024 AERFCM4424
-12 — — AERFCM4055 — —
-12 — — AERFCM4025 AERFCM1025 AERFCM4425
-16 — — AERFBM4056† — —
-16 — — AERFCM4026 AERFCM1026 AERFCM4426
180° Elbow
-20 — — — AERFCM1027 —
-6 — — AERFCM4062 — AERFCM4462
60° Elbow
-8 — — AERFCM4063 — AERFCM4463
-6 — — AERFCM4082 — AERFCM4482
-10 — — AERFCM4064 — AERFCM4464
-8 — — AERFCM4083 — AERFCM4483
-12 — — AERFCM4065 — AERFCM4465
-10 — — AERFCM4084 — AERFCM4484
-16 — — AERFBM4066† — —
-12 — — AERFCM4085 — AERFCM4485
* Signifies a non-swivel fitting.
-16 — — AERFCM4086 — AERFCM4486 † Sold as bulk. Many fittings are also available in bulk. Simply replace the FCM
prefix with FBM followed by the desired part number.

Stainless Steel Hose Assembly Tips ALL11083

Many of the leaks, scratches and

cut fingers that accompany
assembling stainless steel
(braided) hose can be
attributed to ignoring basic
manufacturer's instructions and
not using the specialty tools available
to simplify this process. When cutting
hose, it should be done with a Braided Hose
Cutter (ALL11000) which eliminates any uneven
cuts or fraying that are the cause of most leaks.
To keep the hose-to-fitting process simple and not
puncture any fingers with frayed wire, use of the Koul Tool
Fitting Kit (ALL11080-11087) is recommended. Finally, to
keep from scratching or gouging fittings during assembly,
use an Aluminum Vise Jaw Insert (AERFCM3661) to protect
the surface of the fitting. ALL11000
AERFCM3661

2023 - 2024 HOT ROD AND EARLY MUSCLE 13

StartLite Hose and Fittings
StartLite hose is 45% lighter than conventional high-performance assemblies. Hose has a patented AQP elastomer inner
tube and Nomex outer cover. Combine with aluminum crimp-style fittings for substantial weight savings. Use for fuel, lube,
coolant, and air systems. Sizes -04 through -20. Crimp with Aeroquip ET1000 Series crimp machine. May also be used with
reusable fittings.
Hose Max. Oper. Min. Bend Weight Vacuum 6 Ft. 10 Ft. 20 Ft.
Dash Size I.D. O.D. Pressure Radius Per Ft. Service Length Length Length
-4 .22" .43" 500 2.00" .05 lbs. 20 AERFCU0406 AERFCU0410 AERFCU0420
-6 .34" .55" 500 2.50" .08 lbs. 20 AERFCU0606 AERFCU0610 AERFCU0620
-8 .44" .64" 500 3.50" .11 lbs. 20 AERFCU0806 AERFCU0810 AERFCU0820
-10 .56" .80" 500 4.00" .14 lbs. 20 AERFCU1006 AERFCU1010 AERFCU1020
-12 .69" .93" 350 4.50" .16 lbs. 20 AERFCU1206 AERFCU1210 AERFCU1220
-16 .88" 1.15" 350 5.50" .20 lbs. 20 AERFCU1606 AERFCU1610 AERFCU1620
-20 1.13" 1.41" 350 5.50" .25 lbs. 20 — AERFCU2010 AERFCU2020

Lightweight Crimp Aluminum Fittings for Aeroquip Racing or StartLite Hose

Dash Size Crimp Swivel Dash Dash Size Crimp Swivel

Straight Size Crimp Swivel 120° Elbow
45° Elbow -6 AERFBM4242
-4 AERFBM4211
-6 AERFBM4222 -8 AERFBM4243
-6 AERFBM4212
-8 AERFBM4223 -10 AERFBM4244
-8 AERFBM4213
-10 AERFBM4224 -12 AERFBM4245
-10 AERFBM4214
-12 AERFBM4225 -16 AERFBM4246
-12 AERFBM4215
-16 AERFBM4226 150° Elbow
-16 AERFBM4216
90° Elbow -6 AERFBM4252
-20 AERFBM4217
-6 AERFBM4232 -10 AERFBM4254
30° Elbow
-8 AERFBM4233 -12 AERFBM4255
-6 AERFBM4272
-10 AERFBM4234 180° Elbow
-10 AERFBM4274
-12 AERFBM4235 -8 AERFBM4263
-12 AERFBM4275
-16 AERFBM4236 -10 AERFBM4264
-20 AERFBM4137* -12 AERFBM4265

* Signifies a non-swivel fitting. Select AQP lightweight crimp fittings for ultimate weight savings. Select AQP reusable fittings for field serviceability.

Dash Size Fractional Equivalent Guide Through Hole Dimensions

SAE 37° Fractional SAE 37° Fractional SAE 37° Fractional Dash Size SAE 37° Dash Size SAE 37°
Dash Size Equivalent Dash Size Equivalent Dash Size Equivalent -3 .120" -12 .610"
-02 1/8" -08 1/2" -20 1-1/4" -4 .170" -16 .840"
-03 3/16" -10 5/8" -24 1-1/2" -6 .300" -20 1.080"
-04 1/4" -12 3/4" -32 2" -8 .390" -24 1.310"
-05 5/16" -14 7/8" -10 .480" -32 1.780"
-06 3/8" -16 1"

Thread Size Chart

The following chart is intended as a quick reference guide for
thread size by dash size.

N.P.S.M. SAE 45°

Dash Approximate Automotive S.A.E. S.A.E. P.T.T. S.A.E. Tubing
Size N.P.T.F. Diameter Refrigeration 37° AN O-Ring Boss 30° Automotive Inverted Flare O.D. Size
-2 1/8"-27 1/8"-27 5/16"-24 5/16"-24 5/16"-24 — 5/16"-24 1/8"
-3 — — 3/8"-24 3/8"-24 3/8"-24 — 3/8"-24 3/16"
-4 1/4"-18 1/4"-18 7/16"-20 7/16"-20 7/16"-20 — 7/16"-20 1/4"
-5 — — 1/2"-20 1/2"-20 1/2"-20 — 1/2"-20 5/16"
-6 3/8"-18 3/8"-18 5/8"-18 9/16"-18 9/16"-18 — 5/8"-18 3/8"
-7 — — 11/16"-24 — — — 11/16"-18 —
-8 1/2"-14 1/2"-14 3/4"-16 3/4"-16 3/4"-16 — 3/4"-18 1/2"
-10 – – 7/8"-14 7/8"-14 7/8"-14 — 7/8"-18 5/8"
-12 3/4"-14 3/4"-14 1-1/16"-14 1-1/16"-12 1-1/16"-12 — 1-1/16"-16 3/4"
-14 — — — 1-3/16"-12 1-3/16"-12 — — —
-16 1"-111/2 1"-111/2 — 1-5/16"-12 1-5/16"-12 1-5/16"-14 — 1
-20 1-1/4"-111/2 1-1/4"-111/2 — 1-5/8"-12 1-5/8"-12 1-5/8"-14 — 1-1/4"
-24 1-1/2"-111/2 1-1/2"-111/2 — 1-7/8"-12 1-7/8"-12 1-7/8"-14 — 1-1/2"
-32 2"-111/2 2"-111/2 — 2-1/2"-12 2-1/2"-12 1-1/2"-12 — 2"

14 2023 - 2024 HOT ROD AND EARLY MUSCLE

Socketless Hose and Fittings
AQP Socketless hose and fittings are easily assembled without tools, saving time
and effort. Socketless hose is offered in blue or black and may be used for gasoline,
alcohol, oils, air, and water.
Hose Max. Oper. Min. Bend Vacuum 3 Ft. 6 Ft. 10 Ft. 15 Ft. 20 Ft. 25 Ft.
Dash Size I.D. O.D. Pressure Radius Service Length Length Length Length Length Length
Blue Socketless Hose
-4 .25" .49" 250 3.00" 28" AERFCV0403 AERFCV0406 AERFCV0410 — — AERFCV0425
-6 .38" .62" 250 3.00" 28" AERFCV0603 AERFCV0606 AERFCV0610 AERFCV0615 AERFCV0620 AERFCV0625
-8 .50" .75" 250 5.00" 28" AERFCV0803 AERFCV0806 AERFCV0810 AERFCV0815 AERFCV0820 AERFCV0825
-10 .63" .91" 250 6.00" 18" AERFCV1003 AERFCV1006 AERFCV1010 AERFCV1015 AERFCV1020 AERFCV1025
-12 .75" 1.03" 250 7.00" 18" — — AERFCV1210 — AERFCV1220 —
Black Socketless Hose
-6 .38" .62" 250 3.00" 28" AERFCN0603 AERFCN0606 AERFCN0610 AERFCN0615 AERFCN0620 AERFCN0625
-8 .50" .75" 250 5.00" 28" AERFCN0803 AERFCN0806 AERFCN0810 AERFCN0815 AERFCN0820 AERFCN0825
-10 .63" .91" 250 6.00" 18" AERFCN1003 AERFCN1006 AERFCN1010 AERFCN1015 AERFCN1020 AERFCN1025
-12 .75" 1.03" 250 7.00" 18" — — AERFCN1210 AERFCN1215 AERFCN1220 AERFCN1225

Socketless Straight Fittings Socketless Elbow Fittings

AERFCM1512 AERFCL1512 AERFCE1512

AERFCM1532 AERFCL1524 AERFCE1532 AERFBM1441
Brass Male Pipe Dash Blue/Red Black Nickel-Plated Steel
Hose Pipe Size Aluminum Aluminum Aluminum Swivel
Dash Nickel Plated Thread Brass Brass 45°
Size Aluminum Aluminum Bulk Size Male Flare Swivel
-4 — — — AERFBM1438
AERFBM1200 1/8"
-4 — — — AERFBM1231 † -6 AERFCM1522 AERFCL1522 AERFCE1522 AERFBM1439
AERFBM1201 1/4"
-8 AERFCM1523 AERFCL1523 — AERFBM1440
AERFBM1207 1/4"
-6 AERFCM1512 AERFCE1512 AERFBM1445 AERFBM1222 -10 AERFCM1524 AERFCL1524 AERFCE1524 —
AERFBM1202 3/8"
-12 AERFCM1525 AERFCL1525 — —
AERFBM1206 3/8"
-8 AERFCM1513 AERFCE1513 — AERFBM1233 † 90°
AERFBM1203 1/2"
-4 — — — AERFBM1441
-10 AERFCM1514 AERFCE1514 AERFBM1204 1/2" — AERFBM1234 †
-6 AERFCM1532 AERFCL1532 AERFCE1532 AERFBM1442
-12 AERFCM1515 AERFCE1515 — 3/4" — —
-8 AERFCM1533 AERFCL1533 AERFCE1533 AERFBM1443
† Fittings mate with both 37° and 45° male flares. -10 AERFCM1534 AERFCL1534 AERFCE1534 —
-12 AERFCM1535 AERFCL1535 — —
Straight -6 to -8 120°
Brass Female Flare -6 AERFCM1542 AERFCL1542 — —
-8 AERFCM1543 AERFCL1543 — —
Hose Size Part No. Thread Size -10 AERFCM1544 AERFCL1544 — —
-6 AERFBM1232† 3/4"-16
-12 AERFCM1545 AERFCL1545 — —
† Fitting mates with both 37° (AN) and 45° male flares.
150°
-6 AERFCM1552 AERFCL1552 — —
Socketless Fitting Assembly -8 AERFCM1553 AERFCL1553 — —
Tool -10 — AERFCL1554 — —
-12 AERFCM1555 — — —
AERFBM3632 180°
Hand-held tool makes quick and -6 AERFCM1562 AERFCL1562 — —
easy work of installing fittings -8 AERFCM1563 AERFCL1563 — —
into FCV or FCN socketless hose. -10 AERFCM1564 AERFCL1564 — —
Works on hose sizes -4, -6, and -8. -12 AERFCM1565 — — —

Hose Assembly Lube Vise Jaw Inserts

AERFBM3553 AERFCM3661
A specially compounded lubricant for use
Keep Aeroquip fittings
in hose assembly work. Suitable for hand or
looking good even after
machine assembly. One-pint container.
assembly. Magnet-backed,
billet inserts may be quickly
set up and will firmly hold
the hex of the fitting during
assembly, without marring the
finish. A horizontal pocket the entire length of the inserts
holds braided hose in place, making straight cuts fast and
simple.

2023 - 2024 HOT ROD AND EARLY MUSCLE 15

AN Flare Adapters AN Flare Adapters (continued)
Blue Black “A” “B”
Anodized Anodized “A” “B” Part No. Dash Size Dash Size A
Aluminum Aluminum Steel Dash Dash Aluminum
Part No. Part No. Part No. Size Size
45° Male to Female Swivel Flare
Aluminum or Steel Flare Union
AERFCM3148 -6 -6 B
AERFCM2050 AERFCM5050 AERFCM2750 -3 -3 A B
AERFCM3149 -8 -8 A
AERFCM2051 AERFCM5051 AERFCM2751 -4 -4
AERFCM3150 -10 -10
AERFCM2052 AERFCM5052 AERFCM2756 -6 -6
AERFCM3151 -12 -12
AERFCM2053 AERFCM5053 AERFCM2759 -8 -8
Aluminum
AERFCM2054 AERFCM5054 AERFCM2761 -10 -10 A B
90° Male to Female Swivel Flare
AERFCM2055 AERFCM5055 — -12 -12
AERFCM3155 -6 -6
AERFCM2056 AERFCM5056 — -16 -16 B
AERFCM3156 -8 -8
Aluminum or Steel Union Reducer A
AERFCM3157 -10 -10
AERFCM2048 AERFCM5048 AERFCM2749 -4 -3
AERFCM3158 -12 -12
AERFCM2156 AERFCM5156 — -6 -4
A B Aluminum 45° Female Flare Swivel B
AERFCM2049 — -8 -4
AERFCM2971 -6 -6
AERFCM2160 AERFCM5160 — -8 -6 A
AERFCM2972 -8 -8
AERFCM2188 — — -10 -4
AERFCM2973 -10 -10
AERFCM2162 AERFCM5162 — -10 -6
AERFCM2974 -12 -12
AERFCM2163 AERFCM5163 AERFCM2760 -10 -8 A B
Aluminum 90° Female Flare Swivel
AERFCM2189 — — -12 -4
AERFCM2978 -6 -6 B
AERFCM2165 — — -12 -6
AERFCM2979 -8 -8
AERFCM2166 AERFCM5166 — -12 -8
AERFCM2980 -10 -10
AERFCM2167 AERFCM5167 -12 -10
AERFCM2981 -12 -12
AERFCM2169 — — -16 -10
AERFCM2170 AERFCM5170 — -16 -12
Aluminum Female Flare Swivel
Low-Profile 90°
B
AERFCM2914 — — -4 -4 O-Ring Boss to Male 37°
AERFCM2915 — — -6 -6 A B
Blue Anodized “A” “B”
AERFCM2916 — — -8 -8 Aluminum A
Dash Size Dash Size
AERFCM2917 — — -10 -10 Part No.
AERFCM2263 -12 -12
AERFCM2918 — — -12 -12
Aluminum or Steel A B
O-Ring Boss to Male 37° Direct to Pipe/Port Fittings
AERFCM2953 AERFCM5953 — -10 -10 Bulk Hose Thread
AERFCM2954 AERFCM5954 AERFCM2958 -10 -12 Part No. Size Size
AERFCM2955 AERFCM5955 AERFCM2959 -12 -12 A B Aluminum
AERFCM2956 AERFCM5956 — -12 -16 Swivel Male Pipe 90° ORB Fitting
AERFCM1344 -8 1/2" NPT
Blue Black “A” “B” “C”
Anodized Anodized Dash Dash Dash
Part No. Part No. Size Size Size A
Aluminum 90° Elbow Union
AERFCM2186 AERFCM5186 -3 -3 — A
AERFCM2119 AERFCM5119 -4 -4 —
AERFCM2120 AERFCM5120 -6 -6 — B Actual Thread Sizes
AERFCM2190 AERFCM5190 -8 -8 — AN Fittings
AERFCM2191 — -12 -12 — B
Aluminum Union Tee A B
AERFCM2060 AERFCM5060 -3 -3 -3
AERFCM2061 AERFCM5061 -4 -4 -4
AERFCM2062 AERFCM5062 -6 -6 -6
C
AERFCM2063 AERFCM5063 -8 -8 -8
AERFCM2064 AERFCM5064 -10 -10 -10 A B
AERFCM2065 AERFCM5065 -12 -12 -12
Aluminum Tee
with Female on the Bottom
C
AERFCM2281 — -4 -4 -4
AERFCM2282 — -6 -6 -6 A B
AERFCM2283 — -8 -8 -8
AERFCM2284 — -10 -10 -10
AERFCM2285 — -12 -12 -12
C
Aluminum Female Flare Tee
AERFCM2174 — -6 -6 -6
A B

16 2023 - 2024 HOT ROD AND EARLY MUSCLE

AN Flare Bulkhead Adapters AN Tube Fittings
Blue Black “A” Alum.
Anodized Anodized “A” “B” Aluminum Steel Dash No. Per Steel No.
Aluminum Aluminum Steel Dash Dash B Part No. Part No. Size Pkg. Per Pkg.
Part No. Part No. Part No. Size Size Aluminum or Steel AN Tube Cap*
Aluminum or Steel Bulkhead Union AERFCM3751 AERFCM3479 -3 2 6
AERFCM2769 AERFCM5769 AERFCM2770 -3 -3 AERFCM3752 AERFCM3480 -4 2 6
AERFCM2071 AERFCM5071 AERFCM2771 -4 -4 AERFCM3740 AERFCM3602 -6 1 2
B
AERFCM2072 AERFCM5072 AERFCM2774 -6 -6 AERFCM3741 AERFCM3603 -8 1 2
A
AERFCM2073 AERFCM5073 AERFCM2775 -8 -8 AERFCM3742 AERFCM3604 -10 1 2
AERFCM2074 AERFCM5074 — -10 -10 AERFCM3743 AERFCM3605 -12 1 2
AERFCM2075 AERFCM5075 — -12 -12 AERFCM3744 — -16 1 1 A
AERFCM2076 AERFCM5076 — -16 -16 ­— AERFCM3567 -20 N/A 1
A * Aluminum tube caps are two-piece. AN numbers for configuration reference.
Aluminum or Steel
45˚ Elbow Bulkhead Union B
AERFCM2893 — — -3 -3
— — — -6 -6 AN Nuts and Sleeves
Aluminum Or Steel “A” Alum.
90˚ Elbow Bulkhead Union A Aluminum Steel Dash No. Per Steel No.
AERFCM2799 AERFCM5799 AERFCM2790 -3 -3 Part No. Part No. Size Pkg. Per Pkg.
AERFCM2081 — AERFCM2791 -4 -4 Aluminum or Steel AN Tube Nut †
AERFCM2082 AERFCM5082 AERFCM2793 -6 -6 AERFCM3554 AERFCM3591 -3 6 1
B AERFCM3555 AERFCM3570 -4 6 1
AERFCM2083 AERFCM5083 AERFCM2794 -8 -8
AERFCM2084 AERFCM5084 — -10 -10 A — AERFCM3571 -5 N/A 1
AERFCM2085 AERFCM5085 — -12 -12 AERFCM3675 AERFCM3572 -6 2 1
AERFCM3676 — -8 2 1
B AERFCM3677 — -10 2 1
A AERFCM3678 — -12 2 1
Blue Black
Anodized Anodized “A” “B” “C” Aluminum or Steel AN Tube Sleeve †
AERFCM3669 AERFCM3667 -3 6 6 A
Aluminum Aluminum Steel Dash Dash Dash
Part No. Part No. Part No. Size Size Size AERFCM3670 AERFCM3668 -4 6 6
Aluminum or Steel Bulkhead Run Tee A C — AERFCM3679 -5 2 2
AERFCM2815 AERFCM5815 AERFCM2809 -3 -3 -3 AERFCM3671 AERFCM3680 -6 2 2
AERFCM2117 — — -4 -4 -4 AERFCM3672 — -8 2 2
AERFCM2118 — — -6 -6 -6 AERFCM3673 — -10 2 N/A
Aluminum or Steel Bulkhead Tee AERFCM3674 — -12 2 N/A
† For use with aluminum tubing. Tube nut and sleeve are to be used together.
AERFCM2808 — — -3 -3 -3 B
AERFCM2091 — — -4 -4 -4 A
A C
AN Plugs
Blue Black Blue Anodized
Anodized Anodized “A” No. Aluminum Steel “A”
Aluminum Aluminum Steel Dash Per Part No. Part No. Dash Size
Part No. Part No. Part No. Size Pack B Aluminum or Steel Flare Plugs
Aluminum Or Steel Locknut AERFCM3712 AERFCM3701 -3
AERFCM3556 AERFCM5556 AERFCM2095 -3 2 AERFCM3713 AERFCM3702 -4
AERFCM2099 AERFCM5099 AERFCM2096 -4 2 AERFCM3714 AERFCM3703 -6
AERFCM2100 AERFCM5100 AERFCM2098 -6 2 AERFCM3715 AERFCM3704 -8
AERFCM2103 AERFCM5103 — -8 1 AERFCM3716 — -10
AERFCM2104 AERFCM5104 — -10 1 A AERFCM3717 — -12
AERFCM2105 AERFCM5105 — -12 1 AERFCM3718 — -16
AERFCM2106 AERFCM5106 — -16 1 Aluminum O-Ring Boss Plug
AERFCM3723 — -4
AERFCM3724 — -6 A
A AERFCM3725 — -8
“A” “B”
Steel Part No. Dash Size Dash Size AERFCM3726 — -10
Steel Reducer AERFCM3727 — -12
37˚ Flare Swivel/37° Flare
AERFCM2408 -6 -4 Steel Flare to Braze
AERFCM2409 -8 -4 “B” A
AERFCM2410 -8 -6 “A” Tube “C”
AERFCM2411 -10 -6 Part No. Dash Size Size Counterbore Size
B
AERFCM2413 -12 -6 AERFCM2871 -4 1/4" .16"
AERFCM2414 -12 -8 AERFCM2872 -6 3/8" .16"
Steel Reducer 37˚ Flare/37° Flare AERFCM2874 -8 1/2" .16"
AERFCM2421 -10 -8 AERFCM2875 -10 5/8" .16"
AERFCM2422 -12 -10 AERFCM2876 -10 3/4" .25"
AERFCM2877 -12 3/4" .25" B
A B

A
A

2023 - 2024 HOT ROD AND EARLY MUSCLE 17

AN Flare to Pipe Adapters Aluminum or Steel Male Run Tee
C C
Blue Black
Anodized Anodized “A” “B”
Aluminum Aluminum Steel Dash Pipe
Part No. Part No. Part No. Size Size
Aluminum or Steel Male Connector B A B A
AERFCM2000 AERFCM5000 AERFCM2511 -3 1/8" Black
AERFCM2001 AERFCM5001 AERFCM2512 -4 1/8" B
Blue Anodized Anodized “A” “B” “C”
AERFCM2002 AERFCM5002 AERFCM2515 -4 1/4" Aluminum Aluminum Steel Dash Pipe Dash
Part No. Part No. Part No. Size Size Size
— — AERFCM2519 -4 3/8"
AERFCM2714 AERFCM5714 AERFCM2700 -3 1/8" -3
— — AERFCM2524 -4 1/2"
AERFCM2124 AERFCM5124 AERFCM2701 -4 1/8" -4
AERFCM2003 AERFCM5003 AERFCM2514 -6 1/8"
— — AERFCM2703 -4 1/4" -4
AERFCM2004 AERFCM5004 AERFCM2517 -6 1/4"
A AERFCM2125 — — -6 1/4" -6
AERFCM2005 AERFCM5005 AERFCM2521 -6 3/8"
— — AERFCM2705 -6 3/8" -6
AERFCM2013 AERFCM5013 AERFCM2525 -6 1/2"
AERFCM2126 — — -8 3/8" -8
— — AERFCM2529 -6 3/4" B — — AERFCM2708 -10 1/2" -10
AERFCM2006 AERFCM5006 AERFCM2518 -8 1/4"
AERFCM2007 AERFCM5007 AERFCM2522 -8 3/8"
AERFCM2008 AERFCM5008 AERFCM2526 -8 1/2" Aluminum Male Branch Tee
— — AERFCM2530 -8 3/4" C C
AERFCM2185 AERFCM5185 AERFCM2523 -10 3/8"
AERFCM2009 AERFCM5009 AERFCM2527 -10 1/2" A
— — AERFCM2531 -10 3/4" A B A B
AERFCM2010 AERFCM5010 AERFCM2528 -12 1/2"
AERFCM2011 AERFCM5011 AERFCM2532 -12 3/4" Black
Blue Anodized Anodized “A” “B” “C”
AERFCM2014 AERFCM5014 AERFCM2534 -12 1" Aluminum Aluminum Dash Size Dash Size Pipe Size
AERFCM2015 AERFCM5015 AERFCM2533 -16 3/4" Part No. Part No.
AERFCM2012 AERFCM5012 AERFCM2535 -16 1" AERFCM2187 AERFCM5187 -3 -3 1/8"
— — AERFCM2541 -20 1-1/4" AERFCM2121 AERFCM5121 -4 -4 1/8"
Aluminum or Steel 45˚ Male Elbow AERFCM2122 — -6 -6 1/4"
AERFCM2020 AERFCM5020 — -3 1/8" A AERFCM2123 AERFCM5123 -8 -8 3/8"
AERFCM2021 AERFCM5021 AERFCM2582 -4 1/8"
— — AERFCM2584 -4 1/4" Steel Female Pipe to Male AN
AERFCM2022 AERFCM5022 AERFCM2586 -6 1/4"
— — AERFCM2589 -6 3/8" “A” “B”
Part No. Dash Size Pipe Size
— — — -6 1/2"
A AERFCM2719 -3 1/8"
— — AERFCM2587 -8 1/4" B
AERFCM2720 -3 1/4"
AERFCM2023 AERFCM5023 AERFCM2590 -8 3/8"
AERFCM2721 -4 1/8"
— — AERFCM2593 -8 1/2"
AERFCM2723 -4 1/4" B
— — AERFCM2591 -10 3/8"
AERFCM2725 -6 1/4"
AERFCM2024 AERFCM5024 AERFCM2594 -10 1/2"
AERFCM2727 -6 3/8"
— — AERFCM2595 -12 1/2"
B AERFCM2726 -8 1/4"
AERFCM2025 AERFCM5025 — -12 3/4"
AERFCM2728 -8 3/8"
AERFCM2026 — — -16 1"
AERFCM2730 -8 1/2"
Aluminum or Steel 90˚ Male Elbow
AERFCM2731 -10 1/2"
AERFCM2030 AERFCM5030 AERFCM2610 -3 1/8" A
AERFCM2734 -10 3/4"
AERFCM2031 AERFCM5031 AERFCM2611 -4 1/8"
AERFCM2732 -12 1/2"
AERFCM2032 AERFCM5032 AERFCM2614 -4 1/4"
— — AERFCM2618 -4 3/8" A
— — — -4 1/2" Steel Female Pipe Flare Tee
AERFCM2033 AERFCM5033 AERFCM2613 -6 1/8" “A” “B” B
AERFCM2034 AERFCM5034 AERFCM2616 -6 1/4" Dash Dash “C”
AERFCM2035 AERFCM5035 AERFCM2620 -6 3/8" Part No. Size Size Pipe Size
— — AERFCM2625 -6 1/2" AERFCM2881 -3 -3 1/8"
AERFCM2036 AERFCM5036 AERFCM2617 -8 1/4" AERFCM2882 -4 -4 1/8"
AERFCM2037 AERFCM5037 AERFCM2621 -8 3/8" AERFCM2883 -4 -4 1/4"
B AERFCM2884 -6 -6 1/4"
AERFCM2038 AERFCM5038 AERFCM2626 -8 1/2"
— — AERFCM2629 -8 3/4" C
A A
AERFCM2016 AERFCM5016 AERFCM2622 -10 3/8" Steel Female Pipe Flare Tee
AERFCM2039 AERFCM5039 AERFCM2627 -10 1/2"
“A” “B” “C”
— — AERFCM2630 -10 3/4" Part No. Dash Size Pipe Size Dash Size
— — AERFCM2623 -12 3/8" B A
AERFCM2817 -3 1/8" -3
AERFCM2017 AERFCM5017 AERFCM2628 -12 1/2"
AERFCM2040 AERFCM5040 — -12 3/4"
AERFCM2018 — — -16 3/4"
Steel Bulkhead Connectors
AERFCM2041 — — -16 1" B “A” “B” C
Part No. Dash Size Pipe Size
AERFCM2821 (Female) -4 1/8"
AERFCM2831 (Male) -4 1/4" A B

18 2023 - 2024 HOT ROD AND EARLY MUSCLE

Carburetor and Banjo Fittings Dual-Feed
AERFCM1066 (Blue/Red) Assemblies
Banjo fitting for Holley Single-Feed 600- for Holley Carbs
660 Series and all 2-barrel series with 9/16"-24 thread. Dual-feed assemblies are completely assembled and
Hose fitting size is -6AN. Replacement crushwasher ready to install.
AERFCM3627. Hose and
Dist. Between Fitting
Part No. Application Bowl Fittings Dash
AERFCM2110 (Blue) AERFCP0101 Double Pumper Carbs 9-1/4" -6
AERFCM5110 (Black) AERFCP0102 Dual-Feed Single Pump Carbs 8-5/8" -6
Holley Dual-Feed 750 through Dominator AERFCP0134 Double Pumper Carbs 9-1/4" -8
1350 Series and Quadrajet up to 1974 with 7/8"-20 thread.
Hose fitting size is -8AN. Replacement crushwasher Replacement Aluminum Crushwashers
AERFCM3516. For use with banjo fittings and carburetor adapters. Five
per package.
AERFCM2113 (Blue) Part No. Dash Size
AERFCM5113 (Black) AERFCM3642
AERFCM3513
-3
-4
Holley Single-Feed 600-660 Series, AERFCM3514 -6
4010/4011 Series and all 2-barrel AERFCM3515 -8
series with 9/16"-24 thread. Hose fitting size is -6AN. AERFCM3516 -10
Replacement Crushwasher AERFCM3514. AERFCM3517 -12

AERFCM2114 (Blue) Aluminum Fuel Pump Adapters

AERFCM5114 (Black) Hose
Blue Black Fitting
Holley Dual-Feed 750 through Dominator Part No. Part No. Dash Size Application
1350 Series and Quadrajet up to 1974 with Inv. Flare
AERFCM2108 — -6
7/8"-20 thread. Hose fitting size is -6AN. 5/8"-18 Thread
Replacement crushwasher is AERFCM3516. AERFCM2111 — -6
Inv. Flare
1/2"-20 Thread
AERFCM2185 AERFCM5185 -10 3/8" Male Pipe
AERFCM2192 (Blue)
Holley Dual-Feed 750 through A B
Dominator 1350 Series and Quadrajet up to 1974 with Aluminum Fuel Block
7/8"-20 thread. Hose fitting size is -8AN. Replacement
crushwasher AERFCM3516. “A” “B” “C” “D”
Pipe Pipe Pipe Pipe C
Part No. Size Size Size Size
D
AERFCM2193 (Blue) AERFCM2179 3/8" 3/8" 1/8" 1/2"

Holley Dual-Feed 750 through

Dominator 1350 Series and Quadrajet up to 1974 with
7/8"-20 thread. Hose fitting size is -6AN. Replacement Aluminum In-Line AN A B
crushwasher AERFCM3516. Pressure Gauge Adapters C
“A”
AERFCM2247 (Blue) Blue
Part No.
Black
Part No.
Dash
Size
“B” “C”
Dash Size Pipe Size
Barry Grant Demon carburetor AERFCM2183 AERFCM5183 -6 -6 1/8"
with 9/16"-24 threads. Long stem with -6AN female AERFCM2184 AERFCM5184 -8 -8 1/8"
swivel.
Aluminum In-Line AN-to-Pipe
Pressure Gauge Adapters A B
AERFCM2249 (Blue) “A” “B” “C”
Part No. C
Barry Grant Demon carburetor with Dash Size Pipe Size Pipe Size
9/16"-24 threads. Short stem with -8AN AERFCM2276 -6 1/4" 1/8"
male end. AERFCM2277 -6 3/8" 1/8"
AERFCM2279 -8 3/8" 1/8"

AERFCM2961
Holley Dual-Feed 750 through Dominator
Aluminum 90° AN-to-AN
1350 Series and Quadrajet up to 1974 with Pressure Gauge Adapters A
C
7/8"-20 thread. Hose fitting size is -8AN. Steel only. Re­ “A” “B” “C”
place­ment crushwasher AERFCM3516. Part No. Dash Size Dash Size Pipe Size
AERFCM2272 -6 -6 1/8"
AERFCM2273 -8 -8 1/8"
B

2023 - 2024 HOT ROD AND EARLY MUSCLE 19

TFE Racing Hose Brake HOSES Steel Inverted Flare Brake Adapters
Aeroquip TFE Racing “A” Hose Fitting “B” Brake A B
Hose for hydraulic brake Part No. Dash Size Thread Size
ap­pli­c a­tions has a bright stainless steel wire braid cover SAE 37˚ Male Flare to 30˚
Inverted Flare (Two Per Package)
that resists abrasion and corrosion and an extruded PTFE
AERFCM2925 -4 7/16"-20
inner liner that’s com­pat­i­ble with all brake fluids. PTFE
SAE 37˚ Male Flare to Female B
hose is rec­om­mend­ed for use only on off-highway brake Inverted Flare (Two Per Package) A
systems. Temperature range of -100°F to +450°F. AERFCM2936 -3 3/8"-24
Dash AERFCM2937 -4 3/8"-24
I.D. O.D. 3 Ft. Length 6 Ft. Length 10 Ft. Length
Size SAE 37˚ Male Flare to 42˚ Inverted Flare (Short
-3 .13" .25" AERFCC0303 AERFCC0306 AERFCC0310 Hex, Two Per Package)
-4 .19" .30" AERFCC0403 AERFCC0406 AERFCC0410 AERFCM2926 -3 3/8"-24
AERFCM2927 -4 3/8"-24 A B
Dash I.D. O.D. 15 Ft. Length 20 Ft. Length AERFCM2928* -3 3/8"-24
Size
-3 .13" .25" AERFCC0315 AERFCC0320 AERFCM2929 -3 7/16"-24
-4 .19" .30" AERFCC0415 AERFCC0420 AERFCM2930 -4 7/16"-24
AERFCM2931 -4 1/2"-20
B
SAE 37˚ Male Flare to Female
Brake Fittings Inverted Flare Tee (One Per Package)
Part No. Hose and Fitting Dash Size AERFCM2909 -3 3/8"-24
Straight AERFCM2910 -4 3/8"-24
* Fitting has small hex.
Steel SAE 37˚ (JIC/AN) Swivel A A
AERFCM1100 -3
AERFCM1101 -4 AERFCM1100 Metric Brake Adapters
“A” Hose
Fitting “B” Brake
Steel Part No. Dash Size Thread Size
45˚ Tube Elbow 37˚ (JIC/AN) SAE 37˚ Male Flare to Metric Flare (Two Per A B
AERFCM1110 -3 Package)
AERFCM1111 -4 AERFCM2941 -3 10mm X 1"
AERFCM1110 AERFCM2942 -3 10mm X 1.25"
AERFCM2943 -4 10mm X 1"
AERFCM2944 -4 10mm X 1.25" B
Steel SAE 37˚ Male Flare to Female
90˚ Tube Elbow 37˚ (JIC/AN) A
Metric Flare (Two Per Package)
AERFCM1120 -3 AERFCM1120
AERFCM2945 -3 10mm x 1"
AERFCM1121 -4 AERFCM2946 -4 10mm x 1"

Straight
SAE Banjo Brake Adapters
Stainless Steel Crimp 37˚ (JIC/AN) “A” Hose
AERFCM1130 -3 Fitting Dash “B” Brake
Part No. Size Thread Size
AERFCM1102 -4 AERFCM1130 SAE 37˚ Flare to Banjo
(Two Per Package)
B
AERFCM2949 -3 3/8"
90˚ Stainless Steel Forged AERFCM2938 -4 3/8"
Elbow SAE 37˚ (JIC/AN) Swivel AERFCM2939 -3 7/16"
AERFCM1150 -3 AERFCM1150 AERFCM2940 -4 7/16" A
AERFCM1151 -4
“A” Crushwasher
Part No. Thread Size Part No.
Steel Male Pipe SAE 37˚ Banjo Bolt
(One Per Package) A
with Brass Nipple AERFCM2921 3/8"-24 AERFCM3642
Hose and AERFCM2922 7/16"-20 AERFCM3513
Fitting Pipe Thread
Part No. Dash Size Size
AERFCM3088 -4 1/8" Metric Banjo Brake Adapters B
SAE 37˚ Male Flare to Metric Banjo
Replacement Sleeve for TFE Fittings (Two Per Package)
AERFCM2947 -3 10mm
Brass Hose and Fitting Dash AERFCM2948 -4 10mm
Part No. Size Qty.
AERFCM3720 -3 5
AERFCM3721 -4 5 A
Metric Banjo Bolt
(One Per Package) A
AERFCM2923 10mm x 1.25" AERFCM3642

20 2023 - 2024 HOT ROD AND EARLY MUSCLE

TFE Racing Hose Brake Line Assemblies
Ready to install, pre-assembled and tested brake line assemblies are manufactured using premium stainless steel TFE PTFE
hose complete with choice of straight or 90° fitting configurations. Assemblies feature a 3,000 PSI maximum operating
pressure. Non-DOT brake lines are intended for off-road use only.
10" Length 12" Length 15" Length 18" Length 21" Length 24" Length 30" Length 36" Length 42" Length
Size Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No.
Straight/Straight Assembly
-3 AERFBPA0030-10 AERFBPA0030-12 AERFBPA0030-15 AERFBPA0030-18 AERFBPA0030-21 AERFBPA0030-24 AERFBPA0030-30 AERFBPA0030-36 —
-4 AERFBPA0040-10 AERFBPA0040-12 AERFBPA0040-15 AERFBPA0040-18 AERFBPA0040-21 AERFBPA0040-24 AERFBPA0040-30 AERFBPA0040-36 —
Straight/90° Assembly
-3 — — AERFBPA0039-15 AERFBPA0039-18 AERFBPA0039-21 AERFBPA0039-24 AERFBPA0039-30 AERFBPA0039-36 AERFBPA0039-42
-4 — — AERFBPA0049-15 AERFBPA0049-18 AERFBPA0049-21 AERFBPA0049-24 AERFBPA0049-30 AERFBPA0049-36 AERFBPA0049-42

Quick-Disconnect Brake Aluminum

and Clutch Coupling Dust Plugs and Caps
Allows rapid connection/ Keeps dirt and contamination out
disconnection of brake and of oil, fuel, and cooling systems
clutch lines without fluid loss, when not in use.
air inclusion, or the need to Plug Cap No.
bleed the line. Coupling also Dash Size NPT Part No. Part No. Per Pkg.
includes a safety clip on lanyard to pre­vent accidental -04 7/16"-20 AERFBM3655 AERFBM3648 20
dis­con­nec­tion. Available with -3AN or -4AN, SAE 37° -06 9/16"-18 AERFBM3656 AERFBM3649 20
-08 3/4"-16 AERFBM3657 AERFBM3650 20
(JIC/AN) threads. Male half includes jam nut for bulkhead
-10 7/8"-14 AERFBM3658 AERFBM3651 12
mounting. Temperature range -40°F to +250°F.
-12 1-1/16"-12 AERFBM3659 AERFBM3652 10
Hose -16 1-5/16"-12 AERFBM3660 AERFBM3653 10
Fitting Max. Oper. Air
Steel Dash Pressure Including Fluid Loss Length (In.)
Part No. Size (PSI) C.C. Max C.C. Max Connected Aluminum Tank Welding Bungs
AERFBM1073 -3 3000 .02 .10 4.10"
AERFBM1074 -4 3000 .02 .10 4.25" “A” “B” “C”
Part No. Dash Size Dim. Dim.
AERFCM2403 -6 1.56" .59"
Quick-Disconnect AERFCM2404 -8 1.75" .68"
Radiator/Cooling Refill Coupling AERFCM2405 -10 1.87" .75"
C
AERFCM2406 -12 2.00" .90"
Coupling assembly quickly Note: Use O-ring for sealing. Accepts male AN flare with hex
A B
and effectively drains or boss O-ring plug.
cooling systems. Internal
components are corrosion
resistant stainless steel
and Viton seals prevent the AERFBM1153 AERFBM3113 Air Conditioning Hose and Fittings
possibility of leakage. Features 1/2" NPT threads on each Braided Air Conditioning Hose
end. Ideally installed on lower radiator outlet or in-line Finally, a truly innovative
on lower hose. Requires purchase of one male and one product that will function
female coupling. correctly and look
Part No. Description great. This braided air
AERFBM1153 Male Aluminum Quick Disconnect Coupling conditioning hose, when
AERFBM3113 Female Steel Quick Disconnect Coupling, 1.6 oz. used with the Aeroquip
AERFBM3114 Female Aluminum Quick Disconnect Coupling, 3.97 oz. fittings, offers superior
refrigerant performance
O-Rings over the traditional black
Nitrile EPR Dash hose that we have seen for so long. The hose is a stainless
Part No. Part No. Size “A” “B” steel outer braid with a nylon inner tube and is specifically
AERFCM3473* — -4 .351" .072" designed for use on air conditioning systems. Compatible
AERFCM3474* AERFCM3464** -6 .468" .078" with R-134A as well as R-12. Fittings sold separately.
AERFCM3475* AERFCM3465** -8 .644" .087"
AERFCM3476* AERFCM3466** -10 .755" .097"
AERFCM3477* AERFCM3467** -12 .924" .116" Hose Specifications Chart
AERFCM3497* AERFCM3468** -16 1.171" .116" Hose Min.
* Nitrile O-rings are for use with gasoline (ten per package) Dash Max. Bend 3 Foot 6 Foot 9 Foot
** EPR O-rings are for use with alcohol (five per package) Size I.D. O.D. PSI Radius Part No. Part No. Part No.
A -6 0.33" 0.44" 500 4.00" AERFCF0603 AERFCF0606 AERFCF0609
-8 0.43" 0.54" 500 5.25" AERFCF0803 AERFCF0806 AERFCF0809
B -10 0.53" 0.63" 500 6.50" AERFCF1003 AERFCF1006 AERFCF1009

2023 - 2024 HOT ROD AND EARLY MUSCLE 21

Straight Female 90° Female
O-Ring Pilot O-Ring Pilot
Part No. Description with Charge Port
AERFCE1712 -6 Hose Size, Reusable Nickel-Plated Steel
Part No. Description
AERFCE1713 -8 Hose Size, Reusable Nickel-Plated Steel
-6 Hose Size, Reusable
AERFCE1714 -10 Hose Size, Reusable Nickel-Plated Steel AERFCE1832
Nickel-Plated Steel
-8 Hose Size, Reusable
AERFCE1833
Nickel-Plated Steel
Straight Female AERFCE1834
-10 Hose Size, Reusable
Nickel-Plated Steel
O-Ring Pilot with
Charge Port 135° Female O-Ring Pilot
Part No. Description Part No. Description
AERFCE1812 -6 Hose Size, Reusable Nickel-Plated Steel -8 Hose Size, Reusable
AERFCE1793
AERFCE1813 -8 Hose Size, Reusable Nickel-Plated Steel Nickel-Plated Steel
AERFCE1814 -10 Hose Size, Reusable Nickel-Plated Steel -10 Hose Size, Reusable
AERFCE1794
Nickel-Plated Steel

Straight 135° Female O-Ring

Pilot with Charge Port
Hose to Hose with
Part No. Description
Charge Port -10 Hose Size, Reusable
AERFCE1894
Part No. Description Nickel-Plated Steel
AERFCE1914 -10 Hose Size, Reusable Nickel-Plated Steel
Replacement Brass Sleeve
45° Female O-Ring Pilot Part No. Description
Part No. Description AERFCM2430 -6 Hose Size, 6 Per Pkg.
-6 Hose Size, Reusable AERFCM2431 -8 Hose Size, 6 Per Pkg.
AERFCE1722 AERFCM2432 -10 Hose Size, 6 Per Pkg.
Nickel-Plated Steel
-8 Hose Size, Reusable
AERFCE1723
Nickel-Plated Steel
Replacement O-Rings
-10 Hose Size, Reusable
AERFCE1724 Part No. Description
Nickel-Plated Steel
AERFBM3417 -8 Hose Size, 6 Per Pkg.

90° Female O-Ring Pilot

Part No. Description
-6 Hose Size, Reusable
AERFCE1732
Nickel-Plated Steel
-8 Hose Size, Reusable
AERFCE1733
Nickel-Plated Steel
-10 Hose Size, Reusable
AERFCE1734
Nickel-Plated Steel

Pro Touring Double Adjustable Coil-Over Shocks

AFC3850C
Aluminum bodied, double adjustable shock absorbers offer a broad range of adjustment. Fully independent
adjustments for rebound and compression allow precise tuning. Compression adjustment controls bump and “front
end feel” during cornering, while rebound adjustment controls body roll and dampens the spring for overall handling
quality. Mounting ends are 1/2" ID, 1" wide bearing. Coil kits included
Suggested Suggested Ride
Stroke Comp. Ext. Spring Height Height
5" 11.90" 16.90" 10-12" 13.75-14.75"

22 2023 - 2024 HOT ROD AND EARLY MUSCLE

2-5/8" ID Coil-Over Springs
AFCO has set the standard in coil-over springs and they are among the highest quality, best-performing in the industry.
Springs are guaranteed to stay within 1% tolerance of their original free height. Springs are offered in chrome or black finish.
Chrome Chrome Chrome Black Chrome Black Chrome Black
Rate 7" 8" 10" 10" 12" 12" 14" 14"
100 — — — — — AFC22100B — —
110 — — — — — — AFC24110CR —
125 — — — — AFC22125CR AFC22125B AFC24125CR —
150 — — — — AFC22150CR AFC22150B — AFC24150B
175 — — — — — AFC22175B — —
200 — — AFC23200CR — — — — —
225 — — — AFC23225B — — — —
275 — — — AFC23275B — — — —
300 — AFC28300-1CR AFC23300CR — — — — —
350 — — — — — AFC22350B — —
400 — — AFC23400CR AFC23400B — — — —
450 — AFC28450-1CR — — — — — —
600 — — — — — AFC22600B — —

Double Pass GM Metric Calipers

Radiators These stock replacement-
Superior efficiency is appearing remanufactured
delivered by first passing calipers feature a stainless
coolant over the top half of steel piston and low-drag seals.
the radiator and then the Each assembled caliper is
bottom half, allowing the inspected and pressure tested.
radiator to dissipate more Part No. Description
heat than conventional AFC7241-9001 Right Hand, Oversized 2-3/4" Dia.
designs. AFC7241-9002 Left Hand, Oversized 2-3/4" Dia.
AFC6635003 Right Hand, Standard 2-1/2" Dia.
Filler Dry AFC6635004 Left Hand, Standard 2-1/2" Dia.
Part No. Description Inlet Outlet Location Weight
AFC80100NDP 22" x 18-1/2" Right, 1-1/2" Right, 1-3/4" Left 11.3 lbs.
27-1/2" x
AFC80101NDP Right-1-1/2" Right-1-3/4" Left 13.7 lbs
18-1/2" 1979-93 Mustang Struts
AFC80125N 26" x 18-1/2" Right, 1-1/2" Right, 1-3/4" Left 14.9 lbs.
AFC80126N 31" x 18-1/2" Right-1-1/2" Right-1-3/4" Left 15 lbs AFC29022
AFC80127NDP 24" x 18-1/2" Right, 1-1/2" Right, 1-3/4" Left 14.1 lbs. AFCO strut assemblies feature
AFC80130NDP 28" x 19" Right, 1-1/2" Right, 1/3/4" Left 14.3 lbs. a coil-over design that offers
both ride height and precise
Spanner Wrench chassis adjustments, allowing
a “lowered stance” appearance.
AFC20110 The race-inspired valving provides maximum weight
Wrench adjusts coil-over transfer and bounce control. Caster/Camber plates are
nuts. (Spring pressure recommended for optimum results. Coil-over kit must be
should be relieved before purchased separately.
adjusting.)

No-Weld O2 Sensor Mount

Water/Methanol Injection Filter When the need arises for an
AEM30-3003 02 sensor mount and welding
is not an option, AEM’s no-weld
Inline filter uses a micronic mesh
mount is the perfect solution. Drill
screen to filter out particles as small
a hole in the exhaust pipe, install
as 40 microns, protecting internal
the gasket and bolt on the clamp.
engine components and the working
The system is now ready for an 02 sensor.
components of the water/methanol
Mounts are available for 2-1/4" to 3" pipe diameters.
injection pump. Polypropylene housed unit is fully
serviceable and is compatible with virtually any water/ Part No. Description
AEM30-2355-250 2-1/4"-2-1/2" Pipe Diameter Sensor Mount
methanol injection system currently available.
AEM30-2355-300 2-3/4"-3" Pipe Diameter Sensor Mount

2023 - 2024 HOT ROD AND EARLY MUSCLE 23

Universal Adjustable Digital Wideband UEGO Controller Gauge with
Fuel Pressure Regulator Bosch 4.9 LSU Sensor
AEM25-302BK AEM 30-4110
The AEM universal adjustable fuel Features a LED display and sweeping
pressure regulator is capable of supplying LED "needle" that changes colors
engines up to 1,000 horsepower. CNC- as AFR changes from rich to lean,
machined from 6061-T6 billet aluminum, a 52mm (2-1/16) gauge housing that
the regulator is engineered with AEM patented fits in most gauge pods, and can be
interchangeable discharge ports which enable regulator remotely mounted anywhere.
output to match that of any fuel pump. Tapped to accept a
-6AN or 9/16"x18 fittings and includes a 1/8"NPT port for a X-Series 2-1/16" Digital Gauges
fuel pressure gauge or sensor. Adjustable from 20 PSI to Designed with a bright three- or
maximum fuel pump capacity. four-digit LED display that is over
85% larger than AEM’s original digital
gauges. Sweeping green LED “needle”
line around the edge of the gauge face
Digital Gauges with Interchangeable Faces and make it very easy to see the displayed
Bezels values at a glance. Gauges come with
AEM30-0300
Easily read, black bezel and faceplate. Two buttons on
gauges include the faceplate enable the user to program
interchangeable peak/recall and select min/max threshold
black and silver warnings.
bezels for up Part No. Description
to 12 different AEM30-0300 Wideband AFR
combinations. Seven selectable backlighting options to AEM30-0301 Oil Pressure, 0-100 PSI
AEM30-0302 Water Temperature, 100°-300°F
match most popular factory gauges.
AEM30-0305 Exhaust Gas Temperature, 0°-1800°F
Part No. Description AEM30-0306 Boost Pressure, -30 In./35 PSI
AEM30-4401 Digital Gauge, 1-100 PSI Oil/Fuel Pressure AEM30-0308 Boost Pressure, -30 In / 60 PSI
AEM30-4402 Digital Gauge, 100-300 Oil/Trans/Water Temperature AEM30-0313 GPS Speedometer, 0-160 MPH

High Flow In-Tank Fuel Pumps

The AEM high-flow fuel pump is engineered Inline Wideband UEGO
for high-output, naturally aspirated and
forced induction EFI engines. Its AEM30-0310
universal 39mm diameter fits most AEM’s inline
vehicle applications. Offset wideband UEGO
inlet eases installation. Factory (universal exhaust
tested flowing 320 LPH @ 43 gas oxygen) is a must
PSI. Kit includes rubber sleeve for data loggers
and end caps, pre-filter, hose, that do not require
and clarifying lead. a gauge to monitor air/fuel ratio. Includes a Bosch O2
feedback 4.2 LSU sensor which gives the controller its
Part No. Description
AEM50-1000 Gasoline
speed and accuracy.
AEM50-1200 E-85
Water/Methanol Injection Kit For
High-Compression Naturally Aspirated and
Forced-Induction
Gas Engines
AEM30-3300
Allows you to increase
boost pressure and
advance timing without
having to run higher-
octane fuel. For forced-
induction vehicles
up to 35 PSI of boost
dependent controller
has an on-board
manifold absolute pressure (MAP) sensor with a molded-
in nipple for a boost hose pickup.

24 2023 - 2024 HOT ROD AND EARLY MUSCLE

Engine Accessory Brackets Small Block Chevy
Functional and economical, Alan Grove's plain Long Water Pump
steel brackets mount alternators, air conditioning
Part No. Description
compressors, and power steering pumps on small and big A/C Compressor Bracket,
block Chevrolet engines in a variety of configurations. ALG101R
Right Side, High-Mount
A/C Compressor Bracket, Right
ALG134R
Small Block Chevy Side, Head-Mount, Low-Profile
Alternator Bracket,
Vortec Cylinder Head ALG201L
Left Side, High-Mount
for Short Water Pump ALG214L
Alternator Bracket,
Left Side, Low-Mount
ALG101R ALG201L
Part No. Description Alternator Bracket,
Alternator Bracket, ALG215R
ALG228L Right Side, Mid-Mount
Left Side, High-Mount Alternator Bracket, Left Side,
Alternator Bracket, ALG223L
ALG232L Pump/Exh. Mount, Low Profile
Left Side, Low-Profile Alternator Bracket for TPI,
ALG230L
Left Side, High-Mount
Alternator Bracket,
Small Block Chevy ALG234L Left Side, Head-Mount,
Vortec Cylinder Head Low-Profile
Power Steering Pump Bracket,
for Long Water Pump ALG402L
Left Side
Part No. Description
Alternator Bracket,
ALG230L
Left Side, High-Mount
Alternator Bracket,
Alternator and
ALG234L
Left Side, Low-Profile Power Steering
ALG230L
Brackets
Small Block Chevy Short Water Pump A tight fit bracket system for
Chevy, low hood applications
Part No. Description
A/C Compressor Bracket,
using short water pump.
ALG100R
Right Side, High-Mount Part No. Description
Alternator Bracket, SB Chevy Alternator and
ALG200L ALG600L
Left Side, High-Mount Power Steering Bracket
Alternator Bracket, BB Chevy Alternator and
ALG200R ALG601L
Right Side, High-Mount Power Steering Bracket
Alternator Bracket for TPI, Extra
ALG228L
Clearance, Left Side, High-Mount
Alternator Bracket,
ALG232L
Left Side, Head Mount, Low-Profile ALG100R
ALG213L
Alternator Bracket, Left Side, Big Block Chevy
Pump/Exh. Mount, Low-Profile
Alternator Bracket, Right Side, Short Water Pumps
ALG213R
Pump/Exh. Mount, Low-Profile Part No. Description
Alternator Bracket, Alternator Bracket,
ALG206L ALG204R
Left Side, Low-Mount Right Side, High-Mount
Alternator Bracket, Alternator Bracket,
ALG211R ALG208L
Right Side, Low-Mount Left Side, Low-Mount
Alternator Bracket, Left Side, Alternator Bracket, Left Side,
ALG210L
ALG209L Low-Mount, Use with 2 O’Clock Low-Mount Late GM CS130 Alternator
Small Case Alternator Alternator Bracket,
ALG218L
Alternator Bracket, Left Side, Low-Profile
ALG207L
Left Side, Low-Mount Tight Fit Alternator Bracket,
ALG218R
Power Steering Pump Bracket, Right Side, Low-Profile
ALG400L
Left Side ALG403L Power Steering Bracket, Left Side
Power Steering Pump Bracket,
ALG404L Left Side 1955-57 Chevy with
Stock Motor Mounts
Big Block Chevy
Long Water Pump
LT-1 Part No. Description
Part No. Description Alternator Bracket, Left Side,
Alternator Bracket, Right Side, ALG217L
ALG227R Low-Mount
Low-Mount Alternator Bracket, Left Side,
ALG222L
Low-Profile
Alternator Bracket, Right Side,
ALG225R ALG217L
Mid-Mount
ALG407L Power Steering Bracket, Left Side

2023 - 2024 HOT ROD AND EARLY MUSCLE 25

Coil-Over Kits
Designed to lower the vehicle and offer modern-era handling,
these bolt-on coil-over kits feature single- or double-adjustable
Phantom Series shocks and high-tensile coil springs. The units
mount into the stock location and are supplied with all required
mounting hardware when applicable. Made in USA.
Spring Rate Drop
Part No. Application Location Type (lbs./in.) (in.)
Single-Adjustable
Bolt-On/Bolt-On Front: 500 Front: 0-2.0
ALD300105 1964-72 GM A-Body, Front/Rear
with Bracket Rear:160 Rear: 0-3.0
1978-96 GM B-Body, 1988-96 GM Truck C1500,
ALD300132 Front Bolt-On 700 0-2.0
1971-96 Chevy Impala
ALD300134 1963-82 Corvette, 1958-70 Chevy Full-Size Front Bolt-On 450 0-2.0
ALDAB2FMS 1964-72 GM A-Body Front Bolt-On 450 0-2.0
ALDABRHS 1964-72 GM A-Body Rear Bolt-On with Bracket 160 0.5-3.0
ALDAFBFMS 1967-69 GM F-Body, 1968-74 GM X-Body Front Bolt-On 450 0-2.0
ALDAFBFMS3 1970-81 GM F-Body Front Bolt-On 450 0-2.0
ALDAGFMS 1978-88 GM G-Body, 1975-79 GM X-Body Front Bolt-On 450 0.2.0

Vehicle Specific Coil-Over Conversion Kits

Ideal for dual-purpose, street/strip vehicles, coil-over conversion
kits not only offer improved handling, suspension response, and
performance but also provide ride height adjustment. Engineered to
use the OEM mounting locations for a direct, bolt-on installation, each
kit includes Phantom single or Striker double-adjustable aluminum
coil-over shock absorbers, black powder-coated coil-over springs, and
necessary hardware.

Part No. Description

1964-73 Ford Mustang; 1970-77 Ford Maverick,
ALDM1SBF2S
Small Block/Single-Adjustable

RCX Series Coil-Over Shock Kit

ALD300238
RCX Series Double Adjustable Coil Over Shock Kits offer
a wide range of adjustability to get the best handling
performance from a classic car. Aldan coil overs are ride
height adjustable to achieve the exact desired stance with
2" to 3" inches of adjustability. Bolt-on design works with
factory or tubular control arms.

26 2023 - 2024 HOT ROD AND EARLY MUSCLE

Lightweight 14" Aluminum 14" Aluminum Air Cleaner Kits
Air Cleaner Kits Low-profile, spun aluminum air
Race and dyno proven air cleaners feature a low-profile cleaner kits have a plain or
and free-flowing design that creates more power over black finished lid, a base
standard flat air cleaner assemblies. Kits include a high- for carburetors with 5-1/8"
flowing dropped base with matching lid and a sure seal necks, and O-ring spacers
spacer with an integrated O-ring for a positive seal on for a positive seal. Elements
carburetors with a 5-1/8" neck. sold separately. ALL26094
Part No. Description
ALL26094 Plain Kit with 1/2" Spacer
Kits without ALL26097 Black Kit with 1/2" Spacer
Element ALL26095 Plain Offset Base Kit with 1/2" Spacer
These kits are sold ALL26098 Plain Kit with 1" Spacer
ALL26099 Black Kit with 1" Spacer
without filters. Select plain
or black coated finish and the correct
height sure seal spacer.
Individual Components
Description Plain Finish Black Finish
Part No. Description
Kit With 1/2" Sure Seal Spacer ALL25900 ALL25901
ALL26090 Plain Top
Kit With 1" Sure Seal Spacer ALL25902 ALL25903
ALL26088 Black Top
Kit With 1-1/2" Sure Seal Spacer ALL25904 ALL25905
ALL26092 Standard Base
Kit With 2" Sure Seal Spacer ALL25906 ALL25907
ALL26091 Offset Base
1/2" Spacer (places base 1-3/8" below carb neck
ALL26085
Kits with sealing flange)
1" Spacer (places base 7/8" below carb neck
Paper Element ALL26086
sealing flange)
Kits include a paper ALL26087
1-1/2" Spacer (places base 3/8" below carb neck
element filter in choice sealing flange)
of 3", 3-1/2", 4" or 5" 2" Spacer (places base 1/8" above carb neck
ALL25947
sealing flange)
height and a 1" sure seal ALL26084 Replacement Spacer O-ring
spacer. Choose from plain or black
coated finish lid and base.
Description
Kit with 3" Paper Element
Plain Finish
ALL25910
Black Finish
ALL25911
16" Aluminum Air
Kit with 3-1/2" Paper Element ALL25912 ALL25913 Cleaner Kit
Kit with 4" Paper Element
Kit with 5" Paper Element
ALL25914
ALL25916
ALL25915
ALL25917
ALL26096
Larger diameter unit
provides increased filter
Kits with Washable area and air flow over standard 14" air cleaners allowing
Element the same amount of flow when using a shorter element
Kits include a pre-oiled due to limited clearance. Kit includes a low-profile, spun
washable element aluminum lid, a base for carburetors with 5-1/8" neck and
filter in choice of 3", a 1/2" tall O-ring spacer for a positive seal. Element sold
4", 5", or 6" height and separately.
a 1" sure seal spacer.
Choose from plain or black coated Individual Components
finish lid and base. Part No. Description
ALL26089 Top
Description Plain Finish Black Finish
ALL26093 Base
Kit with 3" Washable Element ALL25920 ALL25921
1/2" Spacer (places base 1-11/16" below carb neck
Kit with 4" Washable Element ALL25922 ALL25923 ALL26085
sealing flange)
Kit with 5" Washable Element ALL25924 ALL25925
1" Spacer (places base 1-3/16" below carb neck
Kit with 6" Washable Element ALL25926 ALL25927 ALL26086
sealing flange)
1-1/2" Spacer (places base 11/16" below carb neck
Individual Components ALL26087
sealing flange)
Part No. Description 2" Spacer (places base 3/16" below carb neck
ALL25947
ALL25940 14" Top Plain sealing flange)
ALL25941 14" Bottom Plain ALL26084 Replacement Spacer O-ring
ALL25942 14" Top Black
ALL25943 14" Bottom Black
ALL25944 1/2" Sure Seal Spacer
1" Sure Seal Spacer (places air cleaner base 5/8"
ALL25945
below carb neck sealing flange)
1-1/2" Sure Seal Spacer (places air cleaner base 1/8"
ALL25946
below carb neck sealing flange)
2" Sure Seal Spacer (places air cleaner base 3/8"
ALL25947
above carb neck sealing flange)

2023 - 2024 HOT ROD AND EARLY MUSCLE 27

14” Flat Base Air Cleaner Kits O-Ring Carb Nuts
Lightweight spun aluminum air Seal air cleaner and eliminate
cleaner kits have a flat base to using a wrench to remove
increase air flow. Kits include air cleaner assembly. Black
a lid, base, and a 1/2” spacer aluminum nuts have a grooved
ALL26046
with a built-in O-ring for a pattern for non-slip grip. ALL26045
positive seal.Popular in crate Short Nut Description Tall Nut Description
engine classes when every ALL26045 1/4"-20 Thread ALL26046 1/4"-20 Thread
bit of horsepower counts! ALL26047 5/16"-18 Thread ALL26048 5/16"-18 Thread
Elements sold separately.
Part No. Description Air Cleaner Studs ALL26056
ALL25950 Plain Air Cleaner Kit
Straight stud is 6" long with 1/4"-20
ALL25951 Black Air Cleaner Kit
threads and includes a wing nut and
Individual Components an adapter for carburetors with
5/16"-18 threads.
Part No. Description ALL26058
ALL25954 Plain Top Part No. Description
ALL25955 Plain Base ALL26056 Straight Stud with Adapter
ALL25956 Black Top ALL26058 Adapter, 1/4" -20 to 5/16"-18
ALL25957 Black Base
ALL25944 1/2” Spacer with O-Ring
Straight Air Cleaner Studs
Studs have 5/16"-18 threads and are 6" long.
Offset Air Cleaner Base Part No. Description
ALL26091 ALL26054 Aluminum ALL26054
ALL26055 Chrome Moly
14" base is offset 1" and commonly
used for extra distributor clearance.
Offset base has a 1-1/2" drop and will fit
carburetors with a 5-1/8" neck including Offset Air Cleaner Studs
Q-Jets, Holley 2bbl and Edelbrock Offset studs work with offset air cleaner bases and
carburetors without choke. Base will not work with Holley some 2bbl carburetors that require offset studs. Studs
4bbl carburetors. Offset air cleaner stud ALL26057 is include mounting hardware and have a 1-3/8" offset.
required. Part No. Description
ALL26057 1/4"-20
ALL26053 5/16"-18
2BBL. Air Cleaner Base ALL26058 Adapter, 1/4" to 5/16"
ALL26081 ALL26053
Aluminum air cleaner base has 14"
overall diameter. 5/8" drop, plain Air Cleaner Filters
finish. 3" diameter carburetor flange. Mesh filters fit over an air cleaner
assembly adding another layer of
Air Cleaner Adapter protection against dirt, dust, and
debris. Filters fit Allstar paper
ALL26080 and washable 14" air cleaners,
Use the more readily available 4bbl. air and will not fit oversized units
cleaner on a Rochester 2bbl. carburetor. like R2C.
Accessorize with aftermarket air cleaner and Filters without Top Cover
retain stock 2bbl carburetor and intake. Racing classes
Part No. Description
using a 2bbl can benefit from the higher flow of a 4bbl air ALL26220 14" x 3"
cleaner. Made of high-strength ABS plastic. Adapter has a ALL26221 14" x 4"
3" I.D. and a 5-1/8" O.D. ALL26222 14" x 5"

Air Cleaner Gasket Filters with Top Cover

Part No. Description
ALL87207 ALL26224 14" x 4"
OE-style composite gasket fits most ALL26225 14" x 5"
popular carburetors with 5-1/8” neck.
Gasket seals air cleaner base to carburetor
neck helping prevent dirt and moisture from Air Cleaner Cover
entering carburetors.
ALL26230
Water-repellent over fits 14"
diameter air cleaner assemblies
from 3" to 6" tall. Perfect for
washing or storage and includes
a draw string.

28 2023 - 2024 HOT ROD AND EARLY MUSCLE

Paper Air Filter Elements 1/2" Steel Hood Pin Kits
High-performance paper air filter Kits include two each: 4" long x 1/2" dia. chrome
elements increase air flow. steel pins, chrome steel scuff plates, clips,
Part No. Description and four nuts. Available with flip-over or
ALL26020 14" x 3" hairpin-style clips.
ALL26021 14" x 3-1/2"
Part No. Description
ALL26022 14" x 4"
ALL18512 Kit with 3/16" Dia. Flip-Over Clips
ALL26023 14" x 5"
ALL18514 Kit with 5/32" Dia. Hairpin Clips
ALL26028 16" x 3"
ALL18513 Kit with 1/4" Dia. Flip-Over Clips
ALL26029 16" x 3-1/2" ALL18514
ALL26030 16" x 4"

Washable Air Filter Elements 1/2" Aluminum Hood Pin Kits

Washable air filter elements offer Kits include two each: 4" x 1/2" dia.
better engine protection and aluminum pins, aluminum scuff plates,
increase air flow for more power flip over style, 1/4" dia. steel clips, and four
and torque. Elements are pre-oiled nuts. Clip flips over pin and over-
and available in four heights. center action locks clip in place.
Part No. Description
ALL26000 14" x 3"
ALL26002 14" x 4" Color Complete Kit Pins Only, 1-Pair
ALL26004 14" x 5" Silver (Plain) ALL18500 ALL18507
ALL26006 14" x 6" Red Anodized ALL18501 ALL18508
Blue Anodized ALL18502 ALL18509
Gold Anodized ALL18503 ALL18510
Air Cleaner Top Element Black Anodized ALL18504 ALL18511
ALL26010
Unique 14" diameter element Hood Pin Supports
replaces traditional metal lid Supports thread onto hood pins
to increase air flow for more (before installation) and are a good
horsepower and torque. Washable alternative to sections of rubber hose
element may be cleaned and used commonly used to support hoods and
over and over. Top element is pre-oiled and ready for deck lids. Once supports are in place, a set screw
installation. prevents movement. Supports work with Allstar
Performance aluminum hood pins and other
Carb Hats fully threaded hood pins. Package of 2.
Carburetor hats are ideal Part No. Description
to cover open carbs and ALL18478 3/8"-24
prevent debris from ALL18479 1/2"-20
falling into the engine
while working in garage ALL26040 ALL26042
Universal Hood Pin Mount
or pit area with air cleaner ALL60067
removed. 2-1/2" tall carb Universal bracket with 1/4" mounting holes can be
hats are designed to fit bolted on or welded in place. Bracket accepts 1/2"
most carbs or throttle hood pins to secure hood and deck lids along with many
bodies with a 5-1/8" other uses. Constructed of .100" steel, bracket has an
diameter neck. ALL26043 ALL26044 integrated reinforcing gusset for added strength.
Part No. Description
ALL26040 Plastic
ALL26042 Plastic with Screen Hood Pin Mounts
ALL26043 Aluminum Mounts ease hood pin
Aluminum with Sealing installation. Choose from
ALL26044
O-Ring threaded boss or
Note: Hats will not clear choke linkage or shaft on Holley-style carbs but will clear choke horn tab style. ALL60005 ALL18520
with choke linkage and shaft removed.
Part No. Description Qty. Per Package
Universal Plastic Air Pan ALL18521 3/8"-24 Hood Pin Boss 2
ALL26104 ALL18520 1/2"-20 Hood Pin Boss 2
ALL60005 1/8" Mounting Tab with 1/2" Hole 4
Durable plastic pan fits
ALL60006 3/16" Mounting Tab with 1/2" Hole 4
over the base of most 14" air
cleaners and acts as a cold
air box, sealing off the air
cleaner assembly from the
engine heat. Universal fit pan
is designed for vehicles with air cleaner openings in the
hood and will require additional trimming and sealing for
a proper fit. Pan measures 18" x 4" and includes a silicone
air cleaner base seal.
2023 - 2024 HOT ROD AND EARLY MUSCLE 29
Metric Brake Rotors Granada Brake Rotor
New stock replacement brake rotor Rotor is often used when converting
includes new bearing races and studs stock Mustang II brake assemblies to
for most intermediate sized Metric 11" O.D. x .875" brake rotors and larger
chassis cars including Monte Carlo, calipers. Rotors include new bearing
Grand Prix, and Regal. Rotors measure races and install directly to Mustang II
10.5" O.D. x 1.03" thick. Bearings and seal spindles with stock bearings and seals
not included. ALL42088 (not included). ALL42090
Part No. Description
Note: Both rotors will work with Allstar metric spindles ALL56318 or ALL56319.
ALL42090 Rotor w/ 1/2"-20 Wheel Studs, 5 on 4-1/2" B.C.
ALL42091 Rotor w/ 1/2"-20 Wheel Studs, 5 on 4-3/4" B.C.
1979-81* ALL42089 Rotor w/ 5/8"-11 Wheel Studs, 5 on 5" B.C.
Part No. Description
ALL42086 Rotor with 5/8"-11 Wheel Studs, 5 on 5" B.C. Related Parts
*Outer bearing race has a 1.97" O.D. Part No. Description
ALL72161 Spindle Nut Kit
Related Parts for 1979-81 Style Rotor ALL72165 Front Hub Dust Cap
Part No. Description ALL72308 Master Bearing and Seal Kit
ALL72160 Spindle Nut Kit ALL72160
ALL72126 Hub Seal
ALL72164 Front Hub Dust Cap ALL72270 Inner Bearing
ALL72305 Master Bearing and Seal Kit ALL72274 Outer Bearing ALL72308
ALL72128 Hub Seal
ALL72275 Inner Bearing
ALL72277 Outer Bearing
ALL72164 GM Rear Brake Rotor
ALL42095
ALL72305 Hat-style brake rotor with 5 on 4-3/4"
1982-88† pattern can be used with ALL42180 and
Part No. Description
ALL42181 7.5" metric caliper brackets and
ALL42087 Rotor with 12mm-1.50 Studs, 5 on 4-3/4" B.C. stock type axles. 11-5/8" vented rotor is
ALL42088 Rotor with 5/8"-11 Wheel Studs, 5 on 5" B.C. .790" thick and has a 2.800" I.D. center
†Outer bearing race has a 1.78" O.D. indexing hole to work with most metric-
style axle flanges with a maximum O.D. of 6".
Related Parts for 1982-88 Style Rotor
Part No. Description GM 7.5" Rear Caliper Brackets
ALL72160 Spindle Nut Kit Steel bolt-on
ALL72164 Front Hub Dust Cap brackets are
ALL72306 Master Bearing and Seal Kit used when
ALL72128 Hub Seal
converting ALL42180 ALL42181
ALL72275 Inner Bearing
drum brake equipped
ALL72278 Outer Bearing
ALL72306 7.5" GM style rear ends
to disc brakes. 1/4"
thick brackets replace the
drum brake backing plates to provide secure mounting
TECH TIP for standard intermediate metric calipers (ALL42083 and
The term “Metric Chassis” commonly refers to the ALL42084). Use with ALL42095 brake rotor.
intermediate line of GM cars built from 1978 through
Part No. Description
1988 including the Chevrolet Monte Carlo and Malibu, ALL42180 LH Bracket
Oldsmobile Cutlass, Buick Regal, and the Pontiac ALL42181 RH Bracket
Grand Prix. These chassis are very similar but they also
have some differences. One of the major differences Rear Caliper Brackets
applies to the front steering spindles and brake rotors. ALL42102
Made from 1/4" thick steel, brackets fit
There were three different brake rotors used and two
3" diameter axle housings and work with
different spindles. 1978 year vehicles used a spindle/rotor
11.75" diameter rotors. Available for many
combination that was a one-year production. 1979-88
setups.
vehicles used the same spindle but utilized two different
brake rotors. These rotors appear very similar but the
Weld-On Brackets
1979-81 use a brake rotor with a larger outer bearing and
race than the 1982-88 model years. These rotors may be Part No. Description
ALL42100 Big GM Style, 7" Spacing
interchanged but will require the matching outer bearing
ALL42102 GM Metric, 5-1/2" Spacing
for proper installation.
ALL42104 Wilwood Dynalite, 5-1/4" Spacing
ALL42108 Wilwood Superlite, 3-1/2" Spacing

30 2023 - 2024 HOT ROD AND EARLY MUSCLE

Brake Calipers Hanging Brake Pedal Assembly
Stock-style calipers are perfect ALL41014
replacements on most GM vehicles and Universal brake pedal
will fit up to 1" wide rotor. Metric inlet assembly includes everything
thread is 10mm x 1.50 pitch. Big GM to install a new hanging brake pedal
inlet thread is 7/16"-20. and is ideal when relocating older
Part No. Description style floor-mounted brake pedal with
ALL42081 RH 1973-77 Big GM under floor master cylinder to a more
ALL42082 LH 1973-77 Big GM
convenient firewall location. Firewall-
ALL42083 RH 1978-87 Metric GM
ALL42084 LH 1978-87 Metric GM
mounted bracket is pre-drilled to accept
Allstar power brake boosters or most
Note: We reference RH (right-hand) or LH (left-hand) based on the caliper being mounted
behind the rotor, however, all calipers may be mounted on the front or backside of the rotor.
manual brake master cylinders and includes a dash
support bracket. Multiple pedal mounting holes allow arm
to be positioned 5-7/8" to 11-7/8" from firewall mounting
Rear Disc Brake Kit plate in 1-1/2" increments for desired pedal placement.
ALL42019 Included 3/8"-24 clevis and threaded pushrod may be
Update and greatly cut and re-threaded as needed depending on final pedal
improve braking location.
power by converting
standard drum brake 90° Hanging Brake Pedal Assembly
rear ends to disc
brakes. Universal
ALL41013
rotor hat fits 5 Universal pedal mount positions the
on 4-1/2", 5 on booster and master cylinder under
4-3/4", and 5 on the dash 90° to the firewall for a
5" bolt patterns. Caliper clean underhood appearance and is ideal
mounting brackets weld onto 3" axle tubes. Rotor hats for vehicles that simply do not have room
will not work with some aftermarket axles. Axles with in the engine compartment for a booster or
flanges larger than 5-3/4" must use cast aluminum rotor master cylinder. Bracket has provisions to
hats, ALL42128 or ALL42129. accept Allstar power brake boosters or to
mount a master cylinder directly to the
Kit includes rotors (.810" x 11.75"), universal rotor hats, bracket for manual brake applications.
rotor bolt kits, caliper mounting bolts and caliper Welding required to mount pedal tab
mounting brackets for GM intermediate metric style to pedal.
calipers (ALL42083 and ALL42084).
Note: Kit does not have provisions for parking brake. Universal Floor-Mounted Brake Pedal
Assembly
Mustang II Front Disc Brake Kits ALL41015
Improve the stopping
Pedal assembly is commonly used when converting
power and safety of
under-floor standard single reservoir master cylinder
cars equipped
to a power, dual reservoir master cylinder brake
with Mustang
system. Pedal assembly will accept Allstar 7"
ll spindles.
and 8" power brake boosters. Pedal
Kits include
arms feature bushings to resist
large 11" brake
wear and provide years of use.
rotors in choice
Pedal assembly does not have
of bolt patterns,
provisions for a clutch pedal. ALL41015
caliper mounting brackets, calipers, brake pads, and
installation hardware. Brake hose kits ALL42025 or *Universal pedal assembly will work on 1928-32 Fords with modifications
ALL42032 will help complete the installation.
Part No. Description Power Brake Boosters
ALL42024
Disc Brake Kit Rotors with 1/2"-20 Wheel Studs Boosters are available in 7" or 8"
5 on 4.50" B.C. diameter and fit Allstar brake pedals
Disc Brake Kit Rotors with 1/2"-20 Wheel Studs as well as other aftermarket units.
ALL42029
5 on 4.75" B.C.
For use with ALL41060-41062 master
Disc Brake Kit Rotors with 5/8"-11 Studs 5 on 5"
ALL42030
B.C. (Brake Pads Not Included) cylinders. The 7" booster is 3-3/4" deep,
the 8" booster is 5-1/2" deep.
Part No. Description
ALL41005 7", Single Diaphragm, Universal
ALL41006 8", Dual Diaphragm, Universal
ALL41007 ’55-64 Chevy, 7", Single Diaphragm, Standard Finish
ALL41008 ’55-64 Chevy, 7", Single Diaphragm, Chrome
ALL41009 ’55-64 Chevy, 8", Dual Diaphragm, Standard Finish

2023 - 2024 HOT ROD AND EARLY MUSCLE 31

Corvette Style Master Cylinders Lever-Style Brake Light Switch
Dual-reservoir master cylinders have 1" bores ALL76250
and outlet ports on both sides for easy Switch is commonly used with
plumbing and installation. Popular under-floor mounted brake pedal
master cylinders are used with disc/disc assemblies when switch can contact the brake
and disc/drum manual or power brake pedal arm. Spring-loaded switch is designed to
applications. Slotted mounting holes return to the open position and has two #10-32 ALL76250
on 3-1/4" centers work well with tapped mounting holes, 5/8" on centers. Designed for
Allstar brake boosters easy two-wire connection, one "+" supply and the other to
ALL41060
Part No. Description power brake lights or a brake light relay. Switch is rated at
ALL41060 Cast Iron with 3/8" Ports 4.5 amps and features two male bullet terminals.
ALL41061 Aluminum with 3/8" Ports
ALL41062 Cast Iron with 1/2" and 9/16" Ports
Pressure-Activated Brake Light Switches
Switch is plumbed into the brake
Big Bore Master Cylinder system and is activated by closing
the electrical connection with
ALL41064 rising brake pressure (60-120
Master cylinder with large 1-1/4" bore PSI). Designed for easy two-wire ALL76252 ALL76251
works well on vehicles that require connection, one "+" supply and the other to power brake
increased volume for proper braking or as lights or a brake light relay. Switches are rated at 4.5
an option when experiencing excessive pedal amps and have 1/8"-27 dry seal mounting threads.
travel with standard 1" bore Corvette-style master
Part No. Description
cylinders. Cast iron master cylinder features a deep hole ALL76251 Male Bullet Terminals
piston for use with manual or power brakes. Front brake ALL76252 6-32 Screw Terminals
port accepts 3/16" steel brake line with 3/8"-24 inverted
flare nut. Rear brake port accepts 1/4" steel brake line Residual Check Valves
with 1/2"-20 flare nut (using included adapter) or 9/16"-18
Residual check valves hold a small
flare nut by removing adapter.
amount of pressure in the brake
system to keep the brake system
Master Cylinder Adapter Fittings functioning properly while helping
ALL41012 to maintain a firm pedal. Maintaining system pressure
Fittings adapt master cylinders or prevents fluid from returning to the master cylinder when
combination valves with 1/2"-20 and 9/16"-18 ports to the master cylinder is positioned lower than or close
accept 3/16" inverted flare brake line with standard 3/8"- to the same height as the calipers or wheel cylinders.
24 fittings. Kit includes one of each fitting. Proper system pressure also keeps piston and wheel
cylinder seals expanded, creating a positive seal and
brake pads seated against the rotor. Valves include two
Pedal Rod Extensions 3/16" inverted flare fittings.
Steel extensions have 3/8"-24
Part No. Description
threads and are ALL41048 2 lb. for Disc Brakes (Blue)
often used to ALL41049 10 lb. for Drum Brakes (Red)
connect the brake pedal to the master cylinder or booster
using a female rod end or a clevis. Distribution Block with Proportioning Valve
Part No. Description
ALL41027 4-3/4" Long Overall with 3" of Male Thread
and Brake Light Switch
ALL41028 8" Long Overall with 1" of Male Thread ALL48037
Distribution block connects brake
lines from the master cylinder to
Brake Pedal Clevis front and rear brakes with the added
ALL41026 benefit of a rear proportioning valve
Clevis fastens to the brake pedal arm to and built-in pressure-activated brake
accept a threaded rod extension or power light switch. The proportioning valve may be adjusted to
brake booster pushrod. Clevis is threaded for a 3/8"-24 limit rear brake pressure to help prevent rear brake lock-
rod and has a 3/8" pin. up. Block ports have 3/8"-24 threads that accept 3/16"
inverted flare style fittings. Block includes installation
instructions, fittings, pigtail wiring harness, and boot.
Plunger-Style Brake Light Switch
ALL76253 Proportioning Valve
Popular two-terminal brake light
switch found in most vehicles from
ALL48025
the 1950’s to today. Ideal for most applications, switch Adjust front-to-rear brake bias
is spring loaded to the on position and turns off when with the twist of a knob. Provides
contacted by the brake pedal assembly. Switch has 1/2" up to 57% reduction. Fitting ports
threads with jam nuts for easy mounting in a bracket, and are 1/8"NPT. Valve includes two fittings to adapt to 3/16"
two .250" blade-type terminals. brake line. 1"L, 1-3/4"W, and 3-5/16" tall.

32 2023 - 2024 HOT ROD AND EARLY MUSCLE

Combination Valves Steel Brake Line
Multi-purpose valves are used in the Steel brake line is available
brake system to properly distribute ALL41040 in lengths from 8" to 72" for
fluid to the front and rear brakes, meter plumbing brake systems.
the amount of fluid and pressure delivered to each brake, Standard galvanized zinc coating.
and provide an option to connect a warning light to alert 3/16" Line
in case of brake failure. Length with 3/8"-24 Ends
Part No. Description 8" ALL48048
ALL41040 Disc/Drum 12" ALL48050
ALL41042 Disc/Disc 20" ALL48052
30" ALL48054
Related Part 40" ALL48056
51" ALL48058
Part No. Description
60" ALL48060
ALL41044 Connector for Warning Light
72" ALL48062

Bleeder Tool Stainless Steel Brake Line

ALL41043
Tool temporarily replaces the warning light
switch in ALL41040 and ALL41042 combination
valves to keep the spool valve centered when
bleeding the brake system. When bleeding the
brake system, the spool valve may be forced to 304 Grade stainless steel line has been double annealed
the front or rear and prevent proper system bleeding. for easier bending and flaring. Pre-made lines exceed
SAE and DOT requirements and include standard size
Combination Valve stainless flare nuts for years of service and show quality
finish.
Mounting Brackets
3/16" Line 1/4" Line
Brackets provide a secure mount for ALL41046 Length with 3/8"-24 Ends with 7/16"-24 Ends
combination valves allowing them 8" ALL48300 ALL48310
to be mounted to the frame or directly under the master 12" ALL48301 ALL48311
cylinder providing access to lines and fittings. 20" ALL48302 ALL48312
Part No. Description 30" ALL48303 ALL48313
ALL41045 Horizontal-Mount Bracket 40" ALL48304 ALL48314
ALL41046 Vertical-Mount Bracket 51" ALL48305 ALL48315
60" ALL48306 ALL48316
Electric Line Lock Kit 72" ALL48307 ALL48317

Electrically controlled valve

engages with a switch, and holds Coiled Tubing
pressure to the front brakes on Coiled tubing works great for
drag race vehicles. Commonly building custom length brake
used to prevent vehicles from rolling once they ALL48012 lines without unions. Tubing is
have staged or during burn outs in the water box. easily cut and flared to desired
Detailed installation instructions included. length. Stainless tubing is 304 grade
and double annealed for easy flaring and bending. Coiled
Part No. Description
ALL48012 Electric Line Lock Master Kit
tubing does not include flare nuts (sold separately).
ALL48013 Electric Line Lock Kit with Fittings Part No. Description
ALL48014 Electrical Hardware Kit ALL48040 3/16" Standard Zinc, 25'
ALL48308 3/16" Stainless, 20'
Inverted Flare Nuts ALL48326
ALL48318
1/4" Standard Zinc, 25'
1/4" Stainless, 20'
3/16" and 1/4" flare nuts are used for building custom
brake lines. Nuts are available to fit most master
cylinders and metering/proportioning valves.
Gravel Guard
Select proper thread size for line used. Colors Brake Line Protector
listed may vary. Guard protects steel and plastic brake
Part No. Size Color Qty. lines against possible damage
Flare Nuts for 3/16" Brake Line caused by gravel, rocks and
ALL50110 3/8"-24 Zinc Plated 10-Pack other road/track debris. Zinc-
ALL50111 3/8"-24 Stainless 10-Pack coated steel material is placed over tubing or brake line
ALL50113 7/16"-24 Red 2-Pack before ends are installed. Sold in 8' long lengths.
ALL50114 1/2"-20 Green 2-Pack
Part No. Description
ALL50115 9/16"-18 Olive 2-Pack
ALL48330 3/16"
Flare Nuts for 1/4" Brake Line
ALL48332 1/4"
ALL50116 7/16"-24 Zinc Plated 10-Pack
ALL50117 7/16"-24 Stainless 10-Pack
ALL50118 1/2"-20 Gold 2-Pack
ALL50119 9/16"-18 Blue 2-Pack

2023 - 2024 HOT ROD AND EARLY MUSCLE 33

Line Clamps Caliper Fittings
Choose from rubber Commonly used in stock-type calipers in place of the
cushioned aluminum, nylon banjo fitting and bolt. Fittings allow direct connection to
or clamp-on aluminum in ALL18300 ALL18310 a steel braided line. Fittings are sold in a pack of 2.
3/16" and 1/4". ALL18301 ALL18311

3/16" Line Clamps

Part No. Description
Rubber Cushioned Aluminum,
ALL18300
10-Pack
ALL18320
ALL18310 Nylon, 10-Pack ALL50040 ALL50029 ALL50032 ALL50035
ALL18321
ALL18320 Clamp-On Aluminum, 4-Pack ALL50030
ALL50036
1/4" Line Clamps Part No. Description
ALL50029 3/8"-24 to -3AN Straight
Part No. Description ALL50030 3/8"-24 to -4AN Straight
ALL18301 Rubber Cushioned Aluminum, 10-Pack ALL50032 7/16"-20 to -4AN Straight
ALL18311 Nylon, 10-Pack ALL50035 7/16"-20 to -4AN 90°
ALL18321 Clamp-On Aluminum, 4-Pack ALL50037 10mm – 1.50 to -3AN Straight
ALL50036 10mm – 1.50 to -4AN Straight
NPT to AN Fittings ALL50040 10mm – 1.50 to Female 1/8"-27NPT
1/8"-27NPT steel fittings are commonly used when
connecting braided lines to brake calipers, engine oiling
systems, etc. Banjo Fittings
Banjo fittings are commonly used with banjo bolts and
crush washers in stock-type calipers to allow direct
connection of a steel braided line and allow pivoting the
line as needed. Fittings are sold in a pack of 2.
Part No. Description
ALL50000 ALL50010 ALL50018 ALL50060 3/8" to -3AN
ALL50001 ALL50011 ALL50019 ALL50061 3/8" to -4AN
ALL50062 7/16" to -3AN
ALL50063 7/16" to -4AN
ALL50067 10mm to -3AN
ALL50068 10mm to -4AN
ALL50066 10mm to -4AN Extended

ALL50063 ALL50066
ALL50199
ALL50021 ALL50020 ALL50200

Part No. Description

Banjo Bolts
ALL50000 1/8"NPT Male to -3AN Straight, 2-Pack Banjo bolts are a drilled bolt to allow fluid to
ALL50001 1/8"NPT Male to -4AN Straight, 2-Pack pass through and are commonly used with banjo
ALL50004 1/8"NPT Male to -4AN Straight, Tall fittings and crush washers in stock type calipers
ALL50010 1/8"NPT Male to -3AN 45° to allow direct connection of a steel braided line.
ALL50011 1/8"NPT Male to -4AN 45° Bolts are sold in a pack of 2.
ALL50018 1/8"NPT Male to -3AN 90°
Part No. Description
ALL50019 1/8"NPT Male to -4AN 90°
ALL50070 3/8"-24
ALL50020 1/8"NPT Male to -3AN 90° Tall
ALL50072 7/16"-20
ALL50021 1/8"NPT Male to -4AN 90° Tall
ALL50076 10mm-1.25
ALL50199 1/8"NPT Female to -3AN
ALL50077 10mm-1.50
ALL50200 1/8"NPT Female to -4AN

NPT Fittings Crush Washers

Popular brass 1/8"-27NPT fittings used for a variety of
Crush washers are used when sealing metal to
applications.
metal contact points of banjo fittings and bolts.
Soft material conforms to the irregularities of
the sealing surfaces. Washers are sold in a pack
of 10.
ALL50182 ALL50185 ALL50184 ALL50138 Part No. Description
ALL50082 3/8" and 10mm
Part No. Description ALL50080 7/16"
ALL50182 1/8"NPT Plug, 4-Pack
ALL50184 1/8"NPT Male Union, 4-Pack
ALL50185 1/8"NPT Female Union, 4-Pack
ALL50138 1/8"NPT Tee, 2-Pack
ALL50139
ALL50139 1/8"NPT Tee, 2-Pack

34 2023 - 2024 HOT ROD AND EARLY MUSCLE

Bleeder Caps Bolt-In Adapter Fittings
ALL50855 Bulkhead style aluminum fittings adapt
Rubber caps keep dirt and moisture out of 3/16" inverted flare line to an AN-type
brake caliper bleeder screw fittings. Caps fit fitting. The 9/16" threaded body with
ALL50180 and most other popular small bleeder attaching nut can be mounted through a
screws. Package of 10. C-channel style frame or a chassis tab.
Part No. Description
ALL50104 3/16" to -3AN
Inverted Flare Fittings ALL50105 3/16" to -4AN
ALL60092

An inverted flare fitting is a common brake fitting ALL60092 Weld-On Tabs, 4-Pack
designed to withstand the high pressures found in
braking systems. Clip-In Adapter Fittings
Steel adapter fittings provide a
bulkhead style connection to AN lines
that can be mounted directly to the
chassis by using tabs or brackets and retainer
ALL50120 clips. Fittings fit in a 5/8" hole and are sold in a
ALL50121 ALL50125 ALL50136 ALL50127 ALL50183 pack of 2.
ALL50137
Part No. Description
ALL50100 3/16" Inverted Flare to -3AN ALL50150
Part No. Description ALL50101 3/16" Inverted Flare to -4AN
ALL50120 3/16" to Male 1/8"-27NPT Straight, 4-Pack ALL50102 1/8"-27NPT to -3AN
ALL50125 3/16" to Male 1/8"-27NPT 90°, 4-Pack ALL50103 1/8"-27NPT to -4AN
ALL50127 3/16" to Female 1/8"-27NPT, 4-Pack ALL60029 Bolt-on Tabs 2-Pack
ALL50136 3/16" Tee, 2-Pack ALL60030 Weld-on Tabs 4-Pack
ALL50137 3/16" Tee with 1/8"-27NPT Port ALL50150 Retainer Clip 4-Pack
ALL60029 ALL60030
ALL50135 3/16" Tee eith 1/8"-27NPT Male Nipple on Side
ALL50183 3/16" Plug, 4-Pack
ALL50130 3/16" Union, 4-Pack
TECH TIP
ALL50121 1/4" to 1/8"-27NPT Straight, 4-Pack Installation Reference Brake Line Clip
ALL50129 1/4" to 5/16", 2-Pack ALL50150
Braided Steel Line
ALL50131 1/4" Union, 4-Pack
Rigid Brake Line
ALL50132 5/16" Union, 4-Pack
ALL50133 3/8" Union, 4-Pack
-3AN Or -4AN to 3/16"
Mounting Tab Brake Line Adapter
ALL50100 (-3AN)
Master Cylinder Adapter Fittings ALL60029 or ALL60030
ALL50101 (-4AN)
ALL41012 D.O.T. Legal
Fittings adapt master cylinders or
combination valves with 1/2"-20 and
Brake Hose Kits
9/16"-18 ports to accept 3/16" inverted flare Kit includes everything necessary to complete the
brake line with standard 3/8"-24 fittings. Kit includes connection between 3/16" steel brake line and the
one of each fitting. brake caliper for one axle. Kits include two brake line
adapter fittings, steel weld-on tabs, retainer clips, banjo
caliper fittings, banjo bolts, crush washers, and 16" DOT
Brake Bleeder Bottles approved #3 braided steel hoses.
Contain the mess of bleeding brakes Part No. Description
by capturing fluid in this 16-oz. bottle GM Metric Kit with 10mm-
with a 15" long hose which attaches to ALL42032
1.50 Caliper Bolts
most bleeder screws. The removable Big GM Kit with 7/16"-20
ALL42033
cap has a built-in fitting to secure Caliper Bolts
the hose during storage to help
prevent spills. Choose from
a steel lanyard retainer that Brake Hose Kits
suspends the bottle from Kit includes everything necessary to complete the
a chassis or suspension connection between 3/16" steel brake line and the brake
component, or a magnet caliper for one axle. Kits include two brake line adapter
retainer to secure the bottle to a fittings, steel weld-on tabs, retainer clips, banjo caliper
ALL11019 ALL11017
steel object such as a brake drum fittings, banjo bolts, crush washers, and 15" #3 braided
or rotor during bleeding. ALL11017 has a magnet retainer steel hoses.
and a built-in one way check valve for one person brake Part No. Description
bleeding. GM Metric Kit with 10mm-
ALL42025
Part No. Description 1.50 Caliper Bolts
ALL11019 Bottle with Lanyard Big GM Kit with 7/16"-20
ALL42027
ALL11018 Bottle with Magnet Caliper Bolts
ALL11017 Bottle with Magnet and Check Valve
ALL99435 Replacement Hose

2023 - 2024 HOT ROD AND EARLY MUSCLE 35

 LENGTHS OVER 8 FT.
FOR LOCAL PICKUP ONLY

8-Point Roll Bar Kits Aluminum Flat Stock

Kits increase safety and the structural 6063-T5 aluminum flat stock is ideal
integrity of the vehicle. Main hoops for fabricating mounting brackets,
are custom bent to fit each etc.
application precisely. Hoop and Description 4' Length 12' Length 16' Length
bars constructed of .134" Flat Stock 1" Wide
mild steel, 1-3/4" diameter Kit Shown Assembled 1/8" Thick ALL22250-4 ALL22250-12 ALL22250-16
tubing. Welding required. 3/16" Thick ALL22251-4 ALL22251-12 ALL22251-16
Floor plates sold
separately for unibody cars.
Part No. Description
ALL22600 Camaro/Firebird 1967-69 Aluminum Angled Stock
ALL22601 Camaro/Firebird 1970-81 1" x 1" 6063-T5 aluminum stock is ideal for
ALL22602 Camaro/Firebird 1982-92 fabricating mounting brackets, etc.
ALL22603 Camaro/Firebird 1993-02 Description 4' Length 16' Length
ALL22604 Camaro 2010-15 1" x 1" x 1/16" Thick ALL22253-4 ALL22253-16
G-Body (Monte Carlo, Cutlass, Regal, 1" x 1" x 1/8" Thick ALL22254-4 ALL22254-16
ALL22608
Grand Prix) 1978-88
1" x 1" x 3/16" Thick ALL22255-4 ALL22255-16
ALL22610 Mustang/Capri 1979-93

10-Point Roll Cage Kits Aluminum Square and Rectangular

Kits increase safety and Tubing
the structural integrity of Tubing is 6063-T5 grade alloy with .125"
the vehicle. Main hoops wall thickness. Ideal for fabricating
are custom bent to fit each rub rails or building shop, trailer or pit
application precisely. Hoop equipment like ladders, pit carts, and
and bars constructed of .134" tire racks.
mild steel, 1-5/8" diameter Description 4' Length 12' Length 20' Length
tubing. Welding required. Square
Floor plates sold separately 3/4" x 3/4" ALL22256-4 ALL22256-12 –
for unibody cars. 1" x 1" ALL22257-4 ALL22257-12 ALL22257-20
Rectangular
Kit Shown Assembled
1" x 2" ALL22258-4 ALL22258-12 –
Part No. Description
ALL22620 Camaro/Firebird 1967-69
ALL22621 Camaro/Firebird 1970-81 Aluminum Round Tubing
ALL22622 Camaro/Firebird 1982-92 Round 1-1/2" x .083" tubing is 6061-T6 grade alloy which is
ALL22623 Camaro/Firebird 1993-02 ideal for building bumpers.
G-Body (Monte Carlo, Cutlass, Regal,
ALL22628 Part No. Description
Grand Prix) 1978-88
ALL22085-4 4' Length
ALL22630 Mustang/Capri 1979-93
ALL22085-12 12' Length

Steel Flat Stock

Floor Plates Steel flat stock is ideal for building projects
ALL22640 around the shop or creating
Bolt or weld these steel plates to supports when needed.
the floor pan as required by most Standard-grade steel has
sanctioning bodies when installing roll excellent welding characteristics and is easily cut and
bars into unibody cars. Increase the structural shaped.
integrity and provide a solid mounting point for Description 4' Length 12' Length
the roll bar. 6" x 6" plates are 1/8" (.125") thick and may also 1" x 1/8" ALL22150-4 ALL22150-12
be used for a variety of other uses including fabricating 1" x 3/16" ALL22151-4 ALL22151-12
brackets or mounts. Package of 6. 1-1/2" x 1/8" ALL22152-4 ALL22152-12
2" x 1/8" ALL22154-4 ALL22154-12
Strut Bars 2" x 3/16" ALL22155-4 ALL22155-12

ALL22642
Strut bars increase the
Steel Angled Stock
rigidity and strength of a Steel angled stock is ideal for building projects
chassis, eliminating flexing around the shop or creating supports when
and increased reaction needed. Standard-grade steel has
times. Bars can be installed excellent welding characteristics and is
to upgrade existing ten point easily cut and shaped.
cage kits or when building a Description 4' Length 12' Length
new chassis. Pre-bent to fit a variety of applications, bars 1" x 1" x 1/8" ALL22156-4 ALL22156-12
are 65" long overall with a 14" leg and constructed from 1-1/2" x 1-1/2" x 1/8" ALL22157-4 ALL22157-12
1-5/8" x .134" wall mild steel tubing. 2" x 2" x 1/8" ALL22158-4 ALL22158-12

36 2023 - 2024 HOT ROD AND EARLY MUSCLE

 LENGTHS OVER 8 FT.
FOR LOCAL PICKUP ONLY

Mild Steel Tubing

Sold only in pre-cut lengths (4, 7.5, 12, or 20 ft.). Always check wall thickness tolerance before
cutting or welding, especially if the car is to be certified. Tubing wall thickness will vary.

Round Mild Steel Tubing

Description 4' Length 7.5' Length 12' Length 20' Length
3/8" x .065" ALL22117-4 ALL22117-7 ALL22117-12 -
1/2" x .065" ALL22120-4 ALL22120-7 ALL22120-12 ALL22120-20
3/4" x .065" ALL22124-4 ALL22124-7 ALL22124-12 ALL22124-20
1" x .065" ALL22128-4 ALL22128-7 ALL22128-12 ALL22128-20
1" x .083" ALL22129-4 ALL22129-7 ALL22129-12 ALL22129-20
1-1/4" x .083" ALL22132-4 ALL22132-7 ALL22132-12 ALL22132-20
1-1/4" x .120" ALL22134-4 ALL22134-7 ALL22134-12 ALL22134-20
1-1/2" x .065" ALL22136-4 ALL22136-7 ALL22136-12 -
1-1/2" x .083" ALL22130-4 ALL22130-7 ALL22130-12 -
1-1/2" x .095" ALL22138-4 ALL22138-7 ALL22138-12 ALL22138-20
1-1/2" x .120" ALL22137-4 ALL22137-7 ALL22137-12 ALL22137-20
1-5/8" x .120" ALL22139-4 ALL22139-7 ALL22139-12 -
1-5/8" x .134" - ALL22141-7 ALL22141-12 -
1-3/4" x .065" ALL22144-4 ALL22144-7 ALL22144-12 ALL22144-20
1-3/4" x .095" ALL22146-4 ALL22146-7 ALL22146-12 -
1-3/4" x .134" - ALL22148-7 ALL22148-12 -

Round D.O.M. Mild Steel Tubing

Description 4' Length 7.5' Length 12' Length 17' or 20' Length
1" x .120" * ALL22127-4 ALL22127-7 ALL22127-12 ALL22127-(17 or 20)**
1-1/2" x .083" * ALL22133-4 ALL22133-7 ALL22133-12 ALL22133-(17 or 20)**
1-1/2" x .095" * ALL22135-4 ALL22135-7 ALL22135-12 ALL22135-(17 or 20)**
1-5/8" x .120" * ALL22140-4 ALL22140-7 ALL22140-12 ALL22140-(17 or 20)**
1-3/4" x .095" * ALL22145-4 ALL22145-7 ALL22145-12 ALL22145-(17 or 20)**
1-3/4" x .120" * ALL22147-4 ALL22147-7 ALL22147-12 ALL22147-(17 or 20)**
*Tubing is drawn over mandrel (D.O.M.) and has tighter wall thickness tolerance.
**Length is determined by mill run. Call for availability.

Square Mild Steel Tubing

Description 4' Length 7.5' Length 12' Length 20' Length
1/2" x .065" ALL22160-4 ALL22160-7 ALL22160-12 -
3/4" x .049" ALL22163-4 ALL22163-7 ALL22163-12 -
3/4" x .065" ALL22164-4 ALL22164-7 ALL22164-12 ALL22164-20
1" x .083" ALL22169-4 ALL22169-7 ALL22169-12 ALL22169-20
1-1/2" x .083" ALL22175-4 ALL22175-7 ALL22175-12 -
2" x .083" ALL22182-4 ALL22182-7 ALL22182-12 ALL22182-20

Rectangular Mild Steel (1018)

Description 4' Length 7.5' Length 12' Length
1" x 2" x .120" ALL22183-4 ALL22183-7 ALL22183-12
2" x 3" x .083" ALL22184-4 ALL22184-7 ALL22184-12

2023 - 2024 HOT ROD AND EARLY MUSCLE 37

 LENGTHS OVER 8 FT.
FOR LOCAL PICKUP ONLY

Round Chrome Moly Steel Tubing (4130N)

Sold only in pre-cut lengths (4, 7.5, 12 ft., etc.). Always check wall thickness tolerance before
cutting or welding, especially if the car is to be certified. Tubing wall thickness will vary.
Description 4' Length 7.5' Length 12' Length 17', 19' or 20' Length
1/4" x .035" ALL22000-4 ALL22000-7 - -
3/8" x .058" ALL22005-4 ALL22005-7 - -
1/2" x .049" ALL22010-4 ALL22010-7 - -
1/2" x .058" ALL22012-4 ALL22012-7 - -
5/8" x .049" ALL22015-4 ALL22015-7 - -
5/8" x .058" ALL22017-4 ALL22017-7 - -
3/4" x .049" ALL22020-4 ALL22020-7 - -
3/4" x .058" ALL22022-4 ALL22022-7 - -
3/4" x .095" ALL22024-4 ALL22024-7 - -
3/4" x .120" ALL22026-4 ALL22026-7 - -
7/8" x .058" ALL22030-4 ALL22030-7 - -
7/8" x .095" ALL22032-4 ALL22032-7 - -
1" x .049" ALL22040-4 ALL22040-7 ALL22040-12 -
1" x .058" ALL22042-4 ALL22042-7 ALL22042-12 -
1" x .065" ALL22044-4 ALL22044-7 ALL22044-12 ALL22044-20
1" x .083" ALL22045-4 ALL22045-7 - -
1" x .095" ALL22046-4 ALL22046-7 - ALL22046-20
1-1/8" x .058 ALL22050-4 ALL22050-7 ALL22050-12 -
1-1/8" x .083 ALL22054-4 ALL22054-7 ALL22054-12 -
1-1/4" x .058 ALL22060-4 ALL22060-7 ALL22060-12 ALL22060-20
1-1/4" x .065 ALL22062-4 ALL22062-7 ALL22062-12 ALL22062-(19 or 20)*
1-1/4" x .083 ALL22061-4 ALL22061-7 ALL22061-12 ALL22061-20
1-1/4" x .095 ALL22063-4 ALL22063-7 ALL22063-12 ALL22063-20
1-1/4" x .120 ALL22064-4 ALL22064-7 - ALL22064-20
1-3/8" x .058 ALL22070-4 ALL22070-7 - -
1-3/8" x .095 ALL22072-4 ALL22072-7 - -
1-1/2" x .049 ALL22079-4 ALL22079-7 - -
1-1/2" x .058 ALL22080-4 ALL22080-7 - -
1-1/2" x .065 ALL22082-4 ALL22082-7 ALL22082-12 ALL22082-20
1-1/2" x .083 ALL22084-4 ALL22084-7 ALL22084-12 ALL22084-20
1-1/2" x .095 ALL22086-4 ALL22086-7 ALL22086-12 -
1-5/8" x .083 ALL22090-4 ALL22090-7 ALL22090-12 ALL22090-(19 or 20)*
1-3/4" x .083 ALL22093-4 ALL22093-7 ALL22093-12 ALL22093-(17 or 20)*
* Length is determined by mill run. Please call for availability.

Threaded Tubing Ends

Chrome moly 4130 steel tubing ends are ideal for building custom length suspension
tubes. Available in RH and LH threads.
Thread Size Tubing Size Tube End Insert O.D. RH Part No. LH Part No.
10-32 3/8" x .058" .259" ALL22500 –
5/16"-24 1/2" x .058" .384" ALL22504 –
3/8"-24 5/8" x. 058" .509" ALL22508 ALL22509
3/8"-24 3/4" x .058" .634" ALL22512 ALL22513
1/2"-20 7/8" x .058" .759" ALL22518 ALL22519
1/2"-20 1" x .058" .884" ALL22522 ALL22523
1/2"-20 1" x .065" .870" ALL22526 ALL22527
1/2"-20 1-1/8" x .058" 1.00" ALL22530 ALL22531
5/8"-18 1" x .058" .884" ALL22534 ALL22535
5/8"-18 1" x .095" .810" ALL22538 ALL22539
5/8"-18 1-1/4" x .095" 1.060" ALL22542 ALL22543 ‡
5/8"-18 1-1/4" x .120" 1.010" ALL22546 ALL22547 ‡
3/4"-16 1-1/4" x .065" 1.120" ALL22548 ALL22549 ‡
3/4"-16 1-1/4" x .095" 1.060" ALL22550 ALL22551 ‡
3/4"-16 1-1/4" x .120" 1.010" ALL22554 ALL22555 ‡
3/4"-16 1-3/8" x .095" 1.185" ALL22558 ALL22559 ‡
‡Tube end has built-in hex for adjusting.

38 2023 - 2024 HOT ROD AND EARLY MUSCLE

Flat Tabs
Mild steel flat tabs have a straight edge and can be welded to round tubing, square
tubing, or flat plate.
Quantity Per Overall Center of Hole Hole
Part No. Description Pack Thickness Height Height Diameter
ALL60004 1/8" Tab, 5/8" Hole 4 1/8" 2-5/16" 1-11/16" 5/8" ALL60004 ALL60005 ALL60007 ALL60009
ALL60005 1/8" Tab, 1/2" Hole 4 1/8" 1-7/8" 1-5/16" 1/2" ALL60006 ALL60008
ALL60006 3/16" Tab, 1/2" Hole 4 3/16" 1-7/8" 1-5/16" 1/2"
ALL60007 1/4" Tab, 3/8" Hole 4 1/4" 2" 1-3/8" 3/8"
ALL60008 1/4" Tab, 1/2" Hole 4 1/4" 2" 1-3/8" 1/2"
ALL60009 1/8" Tab, 1/4" Hole 4 1/8" 1-5/8" 1-1/4" 1/4"
ALL60012 1/8" Tab, 1/4" Hole 4 1/8" 1-7/16" 7/8" 1/4"
ALL60013 1/8" Tab, 3/8" Hole 4 1/8" 1-7/16" 7/8" 3/8"
ALL60018 3/16" Seat Tab 4 3/16" 1-1/2" 7/8" 1/2" ALL60012 ALL60018 ALL60020
ALL60019 1/4" Seat Tab 4 1/4" 1-1/2" 7/8" 1/2" ALL60013 ALL60019
ALL60020 Window Frame Tab 10 1/16" 1" 3/4" 3/16"
ALL60021 Window Frame Tab 10 1/16" 3/4" 1/2" 3/16"
ALL60022 Bumper Tab 4 1/8" 1-1/4" 15/16" 1/4"
ALL60076 Chassis Tab 4 1/8" 1-3/4" 1-3/16" 3/8"
ALL60030 Mounting Tab 4 .100" 1-1/4" 3/4" 5/8"
ALL60090 Mounting Tab 4 .100" 1-1/4" 3/4" 3/8" ALL60021 ALL60022 ALL60076 ALL60030
ALL60091 Mounting Tab 4 .100" 1-1/4" 3/4" 7/16" ALL60090
ALL60091
ALL60092 Mounting Tab 4 .100" 1-1/4" 3/4" 9/16"
ALL60092

Radius Tabs
Mild steel radius tabs have a contoured edge to fit various sizes of round tubing.
Quantity Per Overall Center of Hole Hole
Part No. Description Pack Thickness Height Height Dia.
ALL60000 3/16" Tab, No Hole 4 3/16" 2-3/8" - -
ALL60001 3/16" Tab, 3/8" Hole 4 3/16" 2-3/8" 1-3/4" 3/8"
ALL60002 3/16" Tab, 1/2" Hole 4 3/16" 2-3/8" 1-3/4" 1/2"
ALL60000 ALL60001 ALL60003 ALL60010
ALL60003 1/8" Tab, 1/4" Hole 4 1/8" 2" 15/16" 1/4" ALL60002 ALL60011
ALL60010 1/8" Tab, 1/4" Hole 4 1/8" 1-1/8" 9/16" 1/4"
ALL60011 1/8" Tab, 3/8" Hole 4 1/8" 1-1/8" 9/16" 3/8"

Body Brace Tabs

Mild steel tabs have built-in gussets for added support. Choose tabs that mount
parallel or perpendicular to tubing. Package of 4.
Overall Center of Hole Hole
Part No. Description Thickness Height Height Dia.
ALL60014 Round Tube, 1/4" Hole 1/8" 1-1/2" 1" 1/4" ALL60014 ALL60015 ALL60016
ALL60015 Round Tube, Slotted 1/8" 1-1/2" 7/8" 1/4" x 3/4" ALL60017
ALL60016 Round Tube, 3/8" Hole 1/8" 1-3/4" 1-1/4" 3/8"
ALL60017 Round Tube, 1/2" Hole 1/8" 1-3/4" 1-1/4" 1/2"
ALL60041 Round Tube, 1/4" Hole 1/8" 1-3/4" 1-1/4" 1/4"
ALL60086 Round Tube, 1/4" Hole .085" 1-7/16" 1-15/16" 1/4"
ALL60087 Round Tube, 1/4" Hole 1/8" 1-7/16" 1-15/16" 1/4" ALL60024 ALL60041 ALL60086
ALL60024 Flat Mount, 3/8" Hole .085" 1-9/16" 7/8" 3/8" ALL60027 ALL60087
ALL60027 Flat Mount, 1/4" Hole 3/16" 1-9/16" 7/8" 1/4"

Universal Hood Pin Mount Universal Mounting Bracket

ALL60067 ALL60072
Universal bracket with 1/4" mounting holes can be Universal formed bracket is 1/8"
bolted on or welded in place. Bracket accepts 1/2" thick and welds on for many uses, including a
hood pins to secure hood and deck lids along with body mount when modifying or fabricating chassis or as
many other uses. Constructed of .100" steel, bracket has a a rear engine mount bracket when used with rear motor
built-in reinforcing gusset for added strength. mounts. Bracket is 2-1/4"W x 6-1/2"L and may be drilled
for a variety of uses.
Universal Chassis Bracket
ALL60068
Universal gusseted bracket is 3/16" thick
and welds on for many uses including engine
and body mounts. Bracket is 2-1/4" wide x 3-1/4"
long and has a 1/2" hole located 1" from the end of
the bracket.

2023 - 2024 HOT ROD AND EARLY MUSCLE 39

Tubing End Caps Weld-On Shock Brackets
Steel end caps weld to the end Weld-on shock brackets mount standard and coil-over
or inside of tubing to provide shocks with 1/2" I.D. inner bushing or 1/2" rod end to
a clean look, prevent sharp chassis as well as many other uses. 1/8" thick mild steel
exposed edges, and seal tubes brackets include 1/2" bolt, spacer, and locknut.
to keep out dirt and debris. Caps
are commonly used on ends of Notched Tube Mount
bumpers, to fill existing holes in frames, Bracket is notched for 1-1/2" - 1-3/4" round tubing to
and as a flat gusset when butt joining create a gusset style mount that welds on three sides.
sections of square or rectangular tubing. Package of 10. Notched design positions the bracket perpendicular
Part No. Description Thickness to the tubing at a 90° angle for straight mount and
Round End Caps approximately a 75° angle for angled mounts.
ALL22280 7/8" O.D. .125"
ALL22285 1" O.D. .125" Straight Mount
ALL22281 1-1/4" O.D. .125"
ALL22286 1-3/8" O.D. .125"
ALL22282 1-1/2" O.D. .125"
ALL22283 1-5/8" O.D. .125"
ALL22287 1-11/16" O.D. .125"
ALL22284 1-3/4" O.D. .125" ALL60103 ALL60104
Square End Caps Part No. Description
ALL22290 1" x 1" .085" ALL60103 Short Single
ALL22291 1-1/2" x 1-1/2" .085" ALL60104 Long Single
ALL22292 2" x 2" .085"
Rectangle End Cap
ALL22294 2" x 3" .085" Angle Mount

Gussets
Gussets add support and
strength to tubing joints
when building roll cages or ALL60100 ALL60101
chassis mounts. Solid, one Part No. Description
or three hole gussets are 1-7/8" tall x 1/8" thick. ALL60100 Left-Hand Single
Description 10-Pack 100-Pack ALL60101 Right-Hand Single
Solid ALL22192 ALL22192-100
With One Hole ALL22194 ALL22194-100
With Three Holes ALL22196 ALL22196-100 Round Tube Mount
ALL60107
Bracket welds parallel onto tubing. Typically
Wrap-Around Gussets mounted above or below tubing and includes 1/2"
Gussets fit 1.50" to 1.75" tubing and shock mounting hardware.
can be used to join tubing from 70° to 110°. ALL60107
Wrap-around gussets are 1/16" thick and Flat Mount
provide more support and rigidity than a ALL60106
standard flat gusset. Bracket mounts to a flat surface or
Part No. Description square tubing.
ALL22199 10-Pack
ALL22199-50 50-Pack ALL60106

Upper Coil-Over Chassis Tie-Down Brackets

Shock Mount Kit ALL60075
Steel brackets weld to chassis and
ALL60230 provide a secure mounting location
Weld-in kit provides a mounting to hook a tie-down strap or winch cable.
point for rear coil-over shock Package of 2.
mounts on tube, boxed, or stock
frames with up to 48" between
frame rails. Great for drag
Transmission Mount Bracket
racing and street applications, kit includes a 48" long, ALL38072
.120" wall x 1-1/2" mild steel tube, reinforced mounting May be welded to chassis to support
tabs, 2" x 3" end plates and 1/2" hardware. manual or automatic transmissions.
Steel bracket is 1/8" thick with 1" x 7/16"
slots for mounting bolts.

40 2023 - 2024 HOT ROD AND EARLY MUSCLE

Driveshaft Loop Round Tank Brackets
ALL69000 (Bottle Mounts)
Universal driveshaft Hinged brackets are uniquely designed
loop contains the to simplify tank installation and removal.
driveshaft if a yoke or U-joint Offered in a wide variety of sizes to fit
fails. Loop is 1/4" thick x 2" wide mild many applications including NOS and
steel and fully adjustable to fit most cars. fire bottles. Brackets are 1/2" wide and
feature a flat bottom with 2-1/2" bolt
Driveshaft Loop spacing. Use in conjunction with chassis
brackets (ALL14450-14459) when mounting
for 1979-2004 Mustangs to round chassis tubing.
ALL69006 Size Polished Black
Driveshaft safety 2.00" ALL14408 ALL14409
loop bolts-on to help retain 4.00" ALL14414 ALL14415
the front of the driveshaft in the event 4.25" ALL14418 ALL14419
4.375" ALL14422 ALL14423
of a U-joint or other drivetrain component
5.25" ALL14430 ALL14431
breakage. Black epoxy-coated, all-steel loop
6.90" ALL14436 ALL14437
includes mounting hardware and complete instructions.
Loop is designed to fit inside factory tunnel and work with
most driveshafts up to 4" in diameter. Neck Mount Brackets
Two-piece aluminum bottle mounting
brackets are designed for 1.525"
Unwelded Driveshaft Loop diameter necks and accept ALL14450-
ALL69004 14459 chassis brackets. Brackets are
Made from 3/16" flat steel, loop is 1/2" wide.
9-1/2" tall, 5-1/2" wide with a 16" wide Part No. Description
mounting strap that can be cut and ALL14474 Polished Bracket
welded for each installation. ALL14475 Black Bracket

180° Driveshaft Loop

Chassis Brackets
ALL69002
Pre-bent 1" diameter x .083" wall mild steel
(Base Mounts)
tubing is designed for chassis-style cars to 2-piece brackets clamp to chassis
help retain the driveshaft in the event of a tubing and accept round tank brackets
U-joint failure. Loop is 10" tall overall and has (ALL14402-14431) to complete your
a 5" I.D. mounting needs. 2-1/2" bolt spacing.
Mounting base is 1/2" wide.
Size Polished Black
Ford 9" Truss Support 1.00" ALL14450 ALL14451
ALL68330 1-1/4" ALL14452 ALL14453
Weld-on support 1-1/2" ALL14454 ALL14455
1-5/8" ALL14456 ALL14457
adds strength to
1-3/4" ALL14458 ALL14459
rear axle housing
and reduces
unwanted flex Accessory Clamps
during extreme Aluminum two-piece
torque. Constructed of 12-gauge (.108") steel. 36" L x 2" W. clamps are ideal for
mounting small parts
and accessories or
Leaf Spring Pad creating an adjustable ALL10456 ALL10488
ALL56126 clamp-on mount for supporting body or roof panels.
Steel pad welds to 3" diameter rear end Clamps are 1/2" wide and include two 1/4" button head
axle tube when mounting rear end to fasteners.
most leaf springs. Pad is 2-1/2"W by With 1/4"-20 Mount and a 1/4"
Size With 1/4"-20 Mount
5-3/4"L and has a 5/8" center pilot hole. Through Hole
Sold each. 1" ALL10455 ALL10485
1-1/4" ALL10456 ALL10486
1-3/8" ALL10457 ALL10487
1-1/2" ALL10458 ALL10488
1-5/8" ALL10460 ALL10489
1-3/4" ALL10459 ALL10490

2023 - 2024 HOT ROD AND EARLY MUSCLE 41

Oil Eater Degreaser Multi-Purpose Absorbent
The cleaner/degreaser that really ALL12035
works! We can’t say enough about Organic material is a dust-free alternative
this cleaner; it can be used as a pre- when cleaning up spills. Sprinkle product on
wash on greasy clothing, to clean spills and sweep up. 5-lb. resealable bag.
engine components, transmission
cases and engine compartments,
and is even strong enough to clean the ALL78211 ALL78213 Cleaning Wipes
shop and trailer floors! You won’t be Disposable wipes are great for cleaning
disappointed! Cleaner is non-toxic, non-corrosive and hands when washing is not an option.
biodegradable so it is safe for the environment. Perfect for use after fueling vehicles,
Part No. Description
making roadside repairs or even as a pre-
ALL78213 32-oz. Spray Bottle clean to remove stubborn grease. Durable
ALL78211 1-Gallon Container textured wipes are pre-moistened, citrus
scented, and enriched with aloe and vitamin
Air Filter Cleaner E to deep clean and promote soft skin.
Resealable package prevents product from
ALL78222 drying out.
Spray solution directly onto dirty air filter. Part No. Description
Allow a brief time to soak, 5-10 minutes, then ALL12016 30-Ct. Pop-Up Dispenser
rinse clean with water. For use with Allstar ALL12017 60-Ct. Pop-Up Dispenser
washable air filter elements. Plastic 24-oz.
bottle. Scott Rags
ALL12005
Plexus Cleaner Multi-purpose cloth-like disposable
ALL78200 towels are perfect for shop and trailer.
Plexus cleaner is formulated to clean and 10" x 12" towels are packaged in a 200-
protect clear and colored plastics. Unlike ct. box with pop-up dispenser. Mount to
conventional waxes, Plexus cleans as it polishes shop or trailer wall with ALL12220 holder.
and actually seals the pores of plastic, making
small scratches less visible. Dries without Shop Towels
streaks or smears. Excellent for polycarbonate
windows on race cars. 13-oz. can. Ground
ALL12006
Shipment Shop towels are much heavier than
Only standard paper towels and work great
for numerous tasks around the shop
or track. Rolls contain 60 individually
Novus Plastic Cleaner and Polish perforated 11" x 9-1/2" disposable sheets.
Novus plastic polish will restore the finish of plastics,
including polycarbonate windows and windshields.
Offered in three formulas. Towels
Soft, absorbent terry cloth towels can be
Cleaner 1 used for polishing, wiping up spills, or
ALL78201 general detailing. Shop towels belong
Gently cleans all plastics without scratching. in every tool box as well as in the shop,
Leaves a lustrous shine that resists fogging, garage, or trailer.
repels dust, and eliminates static. Part No. Description
8-oz. spray bottle. ALL12010 Red Shop Towels, 25-Pack
ALL12011 White Shop Towels, 25-Pack
Polish 2 ALL12012 White Terry Towels, 12-Pack
ALL78202
Removes fine scratches, Microfiber Towels
haziness, and abrasions from ALL12008
most plastics. With repeated 12" x 12" terry microfiber towels are great
use, polish 2 will restore faded for polishing, cleaning, and many other
and discolored plastics. 8-oz. uses around the shop or when detailing
squeeze bottle. a vehicle. Different color towels keep
jobs separated and help eliminate
Polish 3 cross contamination between various
ALL78203 polishes or cleaners. Package of 3.
Removes heavy scratches and abrasions from
most acrylic surfaces. Requires both #1 and
#2 polishes for final finishing. 8-oz. squeeze
bottle.

42 2023 - 2024 HOT ROD AND EARLY MUSCLE

Allstar Apron 1955-56 Chevy Aluminum
ALL99962 Radiator
Black cloth apron has pockets to keep ALL30005
tools close at hand. Reverse apron A direct replacement for all
to place pockets on the inside when 1955-56 Chevy passenger cars
grinding tires. Adjustable strap allows with six-cylinder engines, also
one size to fit all. ideal for 1955-57 Chevy V8’s with
long-style water pumps. Radiator has
Aluminum Tank Radiators mounting brackets that position it in front of the
Excellent quality at an affordable price. Filler necks ar­e core support bar, two rows of 1" tubes, furnace-brazed
machined, not stamped, and tanks are furnace­brazed, tanks, a machined billet filler neck with overflow fitting,
not epoxied, eliminating two prime sources of leakage. drain petcock, 1/2"NPT bung for additional temperature
The lightweight 1" tubes, arranged in two rows, offer sender/switch, and mounting clips. The built-in
outstanding cooling in race cars, off-road vehicles and automatic transmission cooler has 1/4"NPT fittings. 23-
street machines. 1/4"H x 23-1/4"W. Core width is 22".

Single Pass 1957 Chevy Aluminum

1-1/2" inlets and 1-3/4" outlets Radiator
have beaded hose fittings.
ALL30007
Core WxH Overall
A direct replacement for all
GM
ALL30010 17" x 18" 22" x 19"
1957 Chevy passenger cars with
ALL30011 19" x 18" 24" x 19" six-cylinder engines, also ideal
ALL30012 21" x 18" 26" x 19" for V8’s with long-style water
ALL30014 23" x 18" 28" x 19" ALL30012 pumps that require additional space
ALL30016 26" x 18" 31" x 19" between engine and radiator. Radiator features
ALL30042 23" x 15" 28" x 16" mounting brackets that position the radiator in front
Ford of the core support bar, two rows of 1" tubes, furnace-
ALL30020 17" x 18" 22" x 19" brazed tanks, a machined billet filler neck with overflow
ALL30021 19" x 18" 24" x 19" fitting, drain petcock, 1/2"NPT bung for additional water
ALL30022 21" x 18" 26" x 19"
temperature sender/switch, and mounting clips. The
ALL30024 23" x 18" 28" x 19"
built-in automatic transmission cooler has 1/4"NPT
ALL30026 26" x 18" 31" x 19"
ALL30043 23" x 15" 28" x 16"
fittings. 23-1/4"H x 23-1/4"W. Core width is 22".
ALL30022
Direct Fit Radiators 1955-57 Chevy Aluminum
Aluminum direct-fit Radiator
radiators provide increased
cooling over original copper
ALL30006
radiator. Designed for A direct replacement radiator
performance vehicles, for all 1955-57 Chevy passenger
features include machined cars with a V8 engine using a
billet aluminum filler necks, short-style water pump. Radiator
fully welded construction and has mounting brackets that
two rows of large 1" tubes properly position it behind the core support
spaced for maximum airflow and cooling bar, two rows of 1" tubes, furnace-brazed
on the street, even at lower speeds. Built-in
ALL30300 tanks, a machined billet filler neck with overflow fitting,
automatic transmission coolers. O.E. fan shrouds may drain petcock, 1/2"NPT bung for additional temperature
require modification for installation. sender/switch, and mounting clips. The built-in
automatic transmission cooler has 1/4"NPT fittings. 23"H
Part No. Description x 24-1/2"W. Core width is 22".
1967-69 GM F-Body (Camaro and Firebird)
ALL30300
PS Outlet, DS Inlet, 31"W x 19-1/2"H Overall, 23"W x 18"H Core
1970-81 GM F-Body (Camaro and Firebird) Radiator Fin Tool Kit
ALL30301 PS Outlet, DS Inlet, 26"W x 19-1/2"H Overall,
20-1/2"W x 18"H Core ALL10680
1982-92 GM F-Body (Camaro and Firebird) Handheld tool
ALL30302 PS Outlet, DS Inlet, 30"W x 19-1/2"H Overall, straightens and
24-1/2"W x 18"H Core repairs damaged
1968-77 GM A-Body (Chevelle, Cutlass, LeMans) fins in most
ALL30304 PS Outlet, DS Inlet, 34"W x 19-1/2"H Overall,
28-1/2"W x 18"H Core
radiators, coolers, and air
1966-80 Mopar DS Outlet, PS Inlet, conditioning condensers. Repairing
ALL30306 damaged fins provides better airflow through core,
29"W x 19-1/2"H Overall, 22-1/2"W x 18"H Core
1964-66 Mustang PS Outlet, PS Inlet, increasing cooling ability. Six interchangeable heads in
ALL30308
19-3/4"W x 21"H Overall, 18"W x 16"H Core 13, 15, 16, 17, 18, and 20 fins per inch.
1979-93 Mustang DS Outlet, PS Inlet,
ALL30310
29-3/4"W x 19-1/2"H Overall, 24-1/2"W x 18"H Core

2023 - 2024 HOT ROD AND EARLY MUSCLE 43

Radiator Caps Aluminum Electric Fan Shrouds
Radiator caps are an often-overlooked Aluminum shrouds
component of the cooling sytem that should are designed to work
be checked and replaced often. Higher cooling with electric fans
system pressure raises the boiling point of coolant ALL30129 mounted as a puller
to help reduce the risk of overheating. Caps behind the radiator.
allow coolant to exit the cooling system into an Special air release
overflow or recovery bottle as coolant heats flaps allow additional
and expands. Recovery-style caps work when airflow to pass
the overflow hose is properly connected to the ALL30136 through the core and
recovery bottle, as the system cools, coolant from shroud as the vehicle
the recovery bottle will be drawn back into the radiator is moving, and close to
to keep the cooling system full. Standard diameter caps allow fan to draw air through
ALL30062
fit 2-1/8" O.D. x 3/4" deep necks, and small diameter the core of the radiator at
caps fit 1-5/8" O.D. x 5/8" deep necks (dimensions are rest. Dimensions are overall
approximate) including a 1/2" top and
Part No. Description Pressure bottom mounting flange and
Standard Diameter Caps (2-1/8") all pans are 1" deep.
ALL30132 14-18psi
ALL30133 14-18psi w/ Lever
ALL30134 18-22psi
ALL30130 18-22psi w/ Lever Fan Sold Separately
Part No. Description
ALL30136 20-24psi
ALL30060 16-3/4" x 18-3/4" Single 16" Fan
ALL30131 20-24psi w/ Lever
ALL30061 Camaro/18-3/4" x 18-3/4" Single 16" Fan 1970-81
ALL30129 28-32psi ALL30062 20-3/4" x 18-3/4" Single 16" Fan
Small Diameter Caps (1-5/8") ALL30063 25-3/4" x 18-3/4" Single 16" Fan
ALL30124 14-18psi ALL30064 25-3/4" x 18-3/4" Dual 12" Fans
ALL30125 18-22psi
ALL30126 28-32psi
*Warning: High-pressure radiator caps are made for use on race vehicles only. Do not use these
Curved Blade Electric Fans
caps on passenger vehicle cars with stock-type radiators. It is recommended to pressure test Electric fans require very little
the complete cooling system to the maximum level of pressure indicated on the cap. Failure to amperage and are suitable for use
test cooling system to the proper pressure prior to installing the cap may result in damage to in race car or tow vehicle. Fans are
the cooling system and/or bodily injury.
set up as “puller” units, mounted
behind the radiator. By flipping
Billet Aluminum Radiator Cap blades, reversing wires, and
mounting in front of radiator, fans
ALL30139 will operate in “pusher” configuration.
Polished billet aluminum cover is Each unit includes a mounting kit.
permanently pressed onto a 16-lb. recovery-
Part No. Description
style radiator cap for enhanced appearance ALL30070 10", 775 CFM
within any engine compartment. Cap is a suitable choice ALL30072 12", 925 CFM
for most street-driven vehicles. ALL30074 14", 1530 CFM
ALL30076 16", 1980 CFM
Fan Shrouds ALL30085 Replacement Mounting Kit
Allows fan to pull more air through the
radiator for increased cooling. Aluminum
and impact-resistant plastic shrouds Molded Nylon Fans
fit fans up to 17" diameter. Radiator Lightweight 6-blade fans are
size reference is based on outside tank economical and very durable.
dimension. Universal bolt pattern with a 5/8"
Shroud Max
pilot hole.
Part No. Radiator Size* Width Shroud Depth Fan Dia. Part No. Description
Fits Allstar Radiators ALL30091 14" Dia.
ALL30107 22" 17-3/8" 9-3/4" 15" ALL30092 15" Dia.
ALL30112 24" 19" 9-3/4" 15" ALL30093 16" Dia.
ALL30109 26" 20-3/4" 9-3/4" 17" ALL30094 17" Dia.
ALL30110 28" 23" 9-3/4" 17" ALL30095 18" Dia.
ALL30115 31" 25-3/4" 9-3/4" 17"
Fits Griffin Radiators
ALL30106 26" 21-1/8" 11" 17"
ALL30108 28" 23" 11" 17"
ALL30111 31" 26-1/4" 11" 17"
Fits Howe Radiators
ALL30114 26" 22-1/2" 11" 17"
ALL30116 28" 24" 11" 17"
ALL30111 31" 26-1/4" 11" 17"
*Radiator size reference is based on outside tank dimension.

44 2023 - 2024 HOT ROD AND EARLY MUSCLE

Reinforcement Plate for Nylon Fans Fan Spacer Kits
ALL30079 Fan spacers position fan closer to
Plate installs beneath the mounting radiator or fan shroud and away from
hardware to strengthen fan mounting pulleys. 1-1/2" and larger spacers are
location and prevent hardware from uniquely designed allowing spacer to ALL30182
damaging the fan. remain bolted to water pump
while changing fans. Aluminum
spacers include 3/4" to 5/8" water
6-Blade Fans pump shaft reducer bushing,
Heavy-duty, 27° 6-blade fans, available four Allen bolts to secure spacer
with aluminum or steel blades, can to water pump, and four hex bolts
move the volume of air needed to with washers to secure fan to spacer. ALL30186
keep race engines cool. Universal Spacers work with 1-3/4" bolt circle flanges only.
bolt pattern with a 5/8" pilot hole. Part No. Description
Part No. Description ALL30180* 1/2"
ALL30096 15" Dia. Aluminum Blades ALL30182* 1"
ALL30074
ALL30097 17" Dia. Aluminum Blades ALL30184 1-1/2"
ALL30102 15" Dia. Steel Blades ALL30192 3-1/2"
ALL30103 17" Dia. Steel Blades ALL30186 2"
ALL30100 18" Dia. Steel Blades ALL30188 2-1/2"
ALL30190 3"
GM Style 4-Blade Steel Fan ALL99027 Replacement Reducer Bushing (5/8" to 3/4")

ALL30099 Aluminum SB Chevy “Short-Style”

Steel 4-blade fan is a direct
replacement for the popular GM Water Pump
4-blade fan. Fan features a 60° blade ALL31100
design, a universal bolt pattern Popular “short-style” water
with a 5/8" pilot hole, and weighs pump that was originally used on
approximately 3 lbs. Small-diameter pre-1969 small block Chevrolets.
flat washers included for proper installation. Pumps are built using all-new
components and an aluminum
Tech Tip: body for added weight savings
This four blade fan was originally designed for use in over original cast iron pumps. Pump features a 3/4" main
O.E. production vehicles. When this fan is used in high- shaft and bearings with a 5/8" pilot and a billet steel hub
performance applications it is recommended that fan drilled for both small and large fan bolt patterns, making
and mounting fasteners be inspected as a part of regular this a good choice for street and mild performance
vehicle maintenance. vehicles. Block mount to fan hub dimension is 5-5/8". This
pump is not recommended for use with mechanical fans
4-Blade Steel Fans over 5,000 RPM. Above this RPM, use the ALL31105 pump
Steel high RPM fans are available in with a 3/4" shaft/bearing.
15", 18", or 19". All have a universal bolt Note: Water pump may need to be clearanced for use with 8" dampers.
pattern with a 5/8" pilot hole. Riveted
reinforcement plate adds strength Aluminum SB Chevy “Corvette Style”
and high pitch 32° blades increase
airflow. Painted black to resist Water Pumps
corrosion. This aluminum version of
Part No. Description
“Corvette style” water pump
ALL30104 15" Dia. was originally used on 1971-82
ALL30105 18" Dia. small block Chevrolet Corvette,
ALL30101 19" Dia. but is now used throughout the ALL31105
motorsports industry. Pump is
built using all-new components
and an aluminum body for added
weight savings over original
cast iron pumps. Pump features
a 3/4" main shaft and bearings
with a 3/4" pilot and a billet
steel hub that has a set screw ALL31106
retainer for use on higher RPM applications.
Block mount to fan hub dimension is 5-13/16".
Part No. Description
ALL31105 Water Pump
Water Pump with 3/8"NPT Bypass Ports and Cam
ALL31106
Stop Hardware
Note: Water pumps may need to be clearanced for use with 8" dampers.

2023 - 2024 HOT ROD AND EARLY MUSCLE 45

Water Pump Spacer Kits SB Ford Chrome Plated Water Neck
Kits provide additional ALL30174
clearance needed for belt or Cast aluminum 45° water neck fits small
gear drive timing systems. block Ford. Includes an O-ring for sealing the
Gaskets are included. base flange and two hex head bolts.
Part No. Description ALL31072
ALL31070 1/8"
ALL31071 1/4" Billet Aluminum Swivel Water Necks
ALL31072 3/8" Billet aluminum water necks fit most
ALL31073 1/2" Chevy V8’s, accept most standard
ALL87230 Replacement Gaskets thermostats, and swivel a full 360°
to simplify connection of LH or
RH radiator hoses to engine. Black
LS Electric Water Pump anodized finish helps protect against ALL30370
corrosion. Stainless steel hardware and an O-ring for
ALL31122 sealing the base of the water neck to engine are included.
Designed to fit LS Gen III/
IV enigines, this block- Part No. Description Part No. Description
ALL30370 1-1/2" ALL30372 -16AN
mounted electric ALL30371 1-3/4" ALL30373 -20AN
water pump features
a high-flow electric
motor that is perfect for Billet Water Neck Spacer
high-performance applications. Equipped with -20AN ALL30375
O-ring inlet and outlet. Machined from 6061 T6 billet Billet aluminum spacer fits between
aluminum and black anodized for corrosion resistance. intake manifold and water neck,
providing connection options for
GM LS Coolant By-Pass/Crossover Plugs temperature senders or additional
water lines. 1" tall spacer fits most Chevy
ALL31170 V8’s. Includes four 1/2"NPT ports with plugs and an O-ring
Plugs provide a location seal on one side, eliminating the need for a gasket.
to bleed air from cooling
system of most GM LS
engines. Replace factory Inline Thermostat Housing
original plugs or use in ALL31160
place of factory crossover Black anodized aluminum inline
steam tubes. Kit includes two plugs thermostat housing fits GM-style
with O-rings. thermostats. Use with 1.5" hose size.

Pulley Shim Kits Upper Radiator Hose Kit

Use shim kits to properly align ALL30260
pulleys. Water pump shims have
Upper hose kit eliminates the concern
dual bolt hole pattern to fit most
of the upper hose collapsing and fits a
GM and Ford water pumps. Crank pulley ALL31064
variety of radiator widths. 1-1/2" hose kit
spacers are for small block Chevys.
includes a 90° steel tube and two silicone
Part No. Description hoses.
ALL31064 Water Pump, 1/16", 1/16", 1/8" (3 Shims)
ALL31066 Crankshaft, 1/16", 5/64", 1/8" (3 Shims)
Billet Aluminum Hose Clamps
Polished Water Necks Billet aluminum clamps provide a
Aluminum water necks fit most lightweight finished look for securing
Chevrolet V8’s. Two-piece design necks popular standard and silicone-style
swivel 360° to accommodate LH and RH radiator hoses.
radiator inlets. An O-ring seal and two Part No. Description
chrome-plated socket-head cap screws ALL18326 Clamp for 1-1/2" I.D. Hose
ALL30170 ALL18327 Clamp for 1-3/4" I.D. Hose
are included.
Part No. Description
ALL30170 90° Neck T-Bolt Band Clamps
ALL30173 75° Neck Stainless steel band clamps provide a better sealing
ALL30171 45° Neck option over traditional hose clamps in
ALL30172 ‡ Straight Neck ALL30172 performance applications. Clamps
feature a 3/4" wide band and are sold
Related Parts: in pairs.
Part No. Description Part No. Description
ALL99136 Replacement O-Ring ALL18345 Clamp for 1-1/2" I.D. Hose
One-Piece Fixed Neck
‡
ALL18347 Clamp for 1-3/4" I.D. Hose
ALL30171

46 2023 - 2024 HOT ROD AND EARLY MUSCLE

Radiator Hoses Primary Wire
Two-ply coolant hose is flexible Single-conductor stranded copper wire
and adapts to a variety of with polyvinyl insulation remains flexible
applications. Abrasion-resistant and is abrasion resistant. Stranded
cover will not crack or harden. copper is the wire of choice for many
Part No. Description Part No. Description projects when building custom wire
1-1/2" I.D. Upper Hose 1-3/4" I.D. Upper Hose harnesses or adding accessories.
ALL30200 12" ALL30220 11"
ALL30202 14" ALL30222 13-1/2" 20AWG
ALL30204 15-1/2" ALL30224 16-1/2" Used for low-voltage sensors, indicator
ALL30206 17" ALL30226 19" lights, instrument panel or dash lighting.
ALL30208 20" ALL30228 23-1/2"
ALL30210 22" Color 50' Coil 100' Spool
Hose Clamps (2-Packs):
Red ALL76500 ALL76510
ALL30212 25" Hose ALL18334 Clamps, Upper
Black ALL76501 ALL76511
ALL30214 30" Hose ALL18336 Clamps, Lower
White ALL76502 ALL76512
Green ALL76503 ALL76513
Yellow ALL76504 ALL76514
Hose Clamps Brown ALL76505 ALL76515
Heavy-duty all stainless steel Blue ALL76506 ALL76516
clamps are easily tightened with
a deep-slot hex-head screw. 14AWG
Superior to standard hardware Most popular when fabricating harnesses for general use
store clamps. For best connection, select including lighting of headlights, taillights and brake lights,
the clamp which fits within the range of hose ignition systems, and interior accessories such as radios,
O.D. interior fans, and gauge panels.
Part No. Min Hose O.D. Max Hose O.D. Color 20' Coil 100' Spool
2-Pack Red ALL76540 ALL76550
ALL18330 1/4" 5/8" Black ALL76541 ALL76551
ALL18332 1/2" 1-1/8" White ALL76542 ALL76552
ALL18334 1" 2" Green ALL76543 ALL76553
ALL18336 1-5/16" 2-1/4" Yellow ALL76544 ALL76554
ALL18338 1-9/16" 2-1/2" Brown ALL76545 ALL76555
ALL18340 1-5/8" 3-1/2" Blue ALL76546 ALL76556
ALL18342 2-5/8" 4-1/2"
10-Pack 12AWG
ALL18330-10 1/4" 5/8" Wire can be used to supply power to ignition boxes,
ALL18332-10 1/2" 1-1/8" cooling fans, fuel pumps and other higher amperage
ALL18334-10 1" 2" accessories including power to electric trailer brakes.
ALL18336-10 1-5/16" 2-1/4" Color 12' Coil 100' Spool
ALL18338-10 1-9/16" 2-1/2" Red ALL76560 ALL76565
Black ALL76561 ALL76566
Power Grip Clamps White ALL76562 ALL76567
Gates Power Grip Blue ALL76563 ALL76568
Clamps seal when
heated with a standard 10AWG
heat gun, forming Commonly used for higher amperage applications
a tight band around including alternator charging wire and supplying power
standard rubber and to trailer for interior lighting or charging trailer batteries
silicone coolant hoses to provide a when utilizing tow vehicle charging system.
secure connection, even under harsh Color 10' Coil 75' Spool
race conditions. Installed clamps provide a smooth, Red ALL76570 ALL76575
Black ALL76571 ALL76576
flush fit around hoses and eliminate exposed sharp
White ALL76572 ALL76577
edges associated with standard hose clamps. Select the
band clamp which fits within range of hose O.D. for best
connection. Sold each. Wire and Cable Cutters
Part No. Min Hose O.D. Max Hose O.D. ALL11003
ALL30250 1/2" 11/16" Capable of cutting stranded copper wire
ALL30251 11/16" 13/16" from 20-gauge primary wire to 1/0 gauge
ALL30252 13/16" 15/16" battery cable. These specially designed
ALL30253 15/16" 1-1/16" cutters will not flatten wire during cutting,
ALL30254 1-1/16" 1-3/16"
which is helpful when installing connectors
ALL30255 1-3/16" 1-1/2"
ALL30256 1-1/2" 1-3/4"
and building battery cables. Cutters are not
ALL30257 1-3/4" 2" designed to cut steel wire.
ALL30258 2" 2-1/4"

Note: Clamps are not designed for use with flammable liquids or fuel line
connections.

2023 - 2024 HOT ROD AND EARLY MUSCLE 47

Heat Sleeve Weather Pack Kits
High-temperature silicone-coated Kits include a variety of tower housings,
fiberglass sleeving is non-flammable shroud housings, seals and terminals to
and resists temperatures up to 500°F. ALL34284 build 1-, 2-, 3-, 4-, and 6-pin connectors
An excellent choice for protection of fuel lines, wiring, for standard 16-14 gauge wire. Kits
cables, and various similar uses. Sleeving is resistant to also include a pin removal tool and
gasoline and many other chemicals. Sold in 3' lengths. convenient carrying case.
Size referenced is sleeve I.D. or O.D. of hose to be Part No. Description ALL76262
covered. ALL76260 Weather Pack Starter Kit
Part No. Description Part No. Description ALL76262 Weather Pack Master Kit
ALL34280 1/4" Red ALL34290 1/4" Black
Quantity Quantity
ALL34282 1/2" Red ALL34292 1/2" Black ALL76260 ALL76262 Description
ALL34284 3/4" Red ALL34294 3/4" Black 1 3 1-Pin Tower Housing
ALL34284 7/8" Red ALL34295 7/8" Black 1 3 1-Pin Shroud Housing
ALL34286 1" Red ALL34296 1" Black 2 4 2-Pin Tower Housing
2 4 2-Pin Shroud Housing
Braided Wire Wrap 1 3 3-Pin Tower Housing
Split-loom braided wrap is 1 3 3-Pin Shroud Housing
1 2 4-Pin Tower Housing
easily applied over existing
1 2 4-Pin Shroud Housing
hoses or wiring to conceal
1 2 6-Pin Tower Housing
and protect against wear or abrasion. Wrap features a 1 2 6-Pin Shroud Housing
25% overlap based on the nominal size listed, allowing 40 100 Seals (50% Blue/50% Green)
the wrap to bend and flex without opening. Wrap is 40 100 Terminal Pins 16-14 GA (50% Male/50% Female)
constructed of polyethylene material, heat resistant up 1 1 Pin Removal Tool
to 250°F and easily cuts with a hot knife or a soldering 1 1 Carrying Case
iron with knife attachment.
Part No. Description Part No. Description Weather Pack Connector Individual Kits
ALL76610 1/8" x 20' ALL76616 3/4" x 5' Weather pack connectors are designed for harsh
ALL76612 1/4" x 15' ALL76618 1" x 10' weather conditions. Originally used by top vehicle
ALL76614 1/2" x 10'
manufacturers, the reliability of these connectors has
been proven for years and they have become common in
Spiral Wire Loom many applications requiring a weather-proof connection.
Loom keeps wiring Snap-lock feature assures positive connection and
bundled together for a neat allows connector to be easily separated as needed.
appearance and can be easily removed when adding or Connectors are rated up to 20A at 12V DC and include
removing wires during wiring harness changes. Open tower housing, seals and terminals for standard 16-14
design makes identifying or locating a wire simple and gauge wire.
will not hold dirt and moisture like solid looms. Loom also Part No. Description
provides abrasion resistance to protect wiring or hoses. ALL76265 1-Wire
High density polyethylene material is rated from -30°F to ALL76266 2-Wire
165°F and sold in 10' lengths. ALL76267 3-Wire
Part No. Description ALL76268 4-Wire Flat
ALL76600 1/4" ALL76269 4-Wire Square
ALL76602 1/2" ALL76270 6-Wire
ALL76604 3/4"
Weather Pack Individual Components
Female
Line Clamps Terminals and Seals, 10-Packs Male
Aluminum clamps have a Tower Shroud
protective neoprene cushion Gauge (Female) (Male) Seal Part No.
to prevent abrasion and a 1/4" 22-20 – – ALL76280 (Purple)
20-18 ALL76272 ALL76275 ALL76281 (Green)
mounting hole to secure electrical wiring, hoses or cables
16-14 ALL76273 ALL76276 ALL76282 (Gray)
to a panel or frame. Black nylon clamps have a 3/16" 12 ALL76274 ALL76277 ALL76283 (Blue) ALL76281
mounting hole to secure electrical wiring, hoses or cables
to a panel or frame. Part No. Description
ALL76284 Seal Plug, 10-Pack
Aluminum Nylon
Clamp Size 10-Pack 50-Pack 10-Pack 50-Pack Housings, Each ALL76284
1/8" – – ALL18309 ALL18309-50
3/16" ALL18300 ALL18300-50 ALL18310 ALL18310-50 Tower
Description (Female) Shroud (Male)
1/4" ALL18301 ALL18301-50 ALL18311 ALL18311-50
1-Pin ALL76288 ALL76289
3/8" ALL18302 ALL18302-50 ALL18312 ALL18312-50
2-Pin ALL76290 ALL76291
1/2" ALL18303 ALL18303-50 ALL18313 ALL18313-50
3-Pin ALL76292 ALL76293
5/8" ALL18304 ALL18304-50 ALL18314 ALL18314-50
4-Pin ALL76294 ALL76295
3/4" ALL18305 ALL18305-50 ALL18315 ALL18315-50
4-Pin Square ALL76296 ALL76297
7/8" ALL18306 ALL18306-50 – –
6-Pin ALL76298 ALL76299
1" ALL18307 ALL18307-50 ALL18317 ALL18317-50
1-1/4" ALL18308 ALL18308-50 – –

48 2023 - 2024 HOT ROD AND EARLY MUSCLE

Weather Pack Terminal Tool Storage Cases
ALL76264 These handy storage
Tool removes male and female pin cases help organize
terminals from Weather Pack many items around the
connectors without damage. shop, trailer, or home such as
electrical connectors, quick-turn
fasteners, tire groover blades, small
Weather Pack Pliers fasteners, and many more items.
ALL76221 Curved compartment bottoms create
Weather Pack pliers will a smooth scoop, making it easy to remove the smallest
crimp most popular 22-10 gauge of items. Molded-in dividers prevent items from slipping
non-insulated terminals. 8" overall under dividers and accidentally mixing product.
length.

ALL14360 ALL14361 ALL14365 ALL14366

Test Leads with Alligator Clips
Part No. Description
ALL76216 ALL14360 Plastic Case, 15 Compartment, 11" x 7" x 1-3/4"
30" long test leads are color ALL14361 Plastic Case, 18 Compartment, 11" x 7" x 1-3/4"
coded red and black. Clips are ALL14365 Metal Case, 21 Compartment, 9-1/2" x 13-1/2" x 2"
5 amp rated. ALL14366 Metal Case, 24 Compartment, 9-1/2" x 13-1/2" x 2"

Universal Wire Terminal Kit

Wire Connectors ALL76224
Molded connectors include a male and A 100-piece terminal kit
female end, joined by a loop of with a generous supply
16-gauge primary wire which may of the most commonly
be cut to length. Useful for switch used connectors for
and gauge panels or accessories automotive wiring. A
that are disconnected frequently. sturdy plastic case with
Part No. Description
divided compartments
ALL76231 One Wire with 12" Loop helps keep connectors
ALL76232 Two Wire with 12" Loop organized.
ALL76233 Three Wire with 48" Loop Each Kit Includes:
ALL76234 Four Wire with 48" Loop 22-18ga. 16-14ga. 12-10ga.
ALL76235 Five Wire with 48" Loop (10) Butt Connectors (10) Butt Connectors (10) Butt Connectors
(8) Ring Terminals #6 (10) Ring Terminals #10 (8) Ring Terminals #10
HEI Connectors (8) Ring Terminals #8 (8) Ring Terminals 1/4" (7) Ring Terminals 3/8"
The proper connector when – (7) Female Blade –
– (7) Male Blade –
repairing or wiring HEI ignition
– (7) Spade –
systems. Connectors have a built-
in retaining clip same as originals
to secure connector to ignition cap. Ratcheting Crimp Pliers
The included pigtail wires are also the correct gauge for ALL76220
easy installation. Perform professional quality crimps on
Part No. Description most standard electrical connectors.
ALL81214 12V Ignition Connector Pliers include jaws for 22-18, 16-14, and
ALL81215 Tach Connector 12-10 gauge connectors and are easily
compressed with help from the ratcheting
mechanism which releases when
connector is fully crimped.

Electrical Tape
ALL14280
Protect electrical connections and secure
wires. 3/4" x 60' roll. UL approved.

2023 - 2024 HOT ROD AND EARLY MUSCLE 49

Terminal Connectors Heat Shrink Tubing
Crimp-style connectors work great when building custom Single-wall tubing is
wire harnesses or making repairs to existing wiring. Tin- placed over wiring and
plated copper terminals are available in a variety of types electrical connectors
and sizes. to seal and strengthen
electrical connections.
Tubing is pre-cut to
6" and has a 2:1 shrink
ratio, meaning it will shrink to approximately half the
size when heat is applied using a heat gun or other heat
Non-insulated terminals are designed to be crimped source.
but may also be soldered for a more secure complete
connection. Often used with separate heat shrink that is Heat Shrink Assortment Kit
applied after connection is made. Package of 20. Part No. Description
Non-Insulated Terminals 22-18 16-14 12-10 Includes 9 pcs. of 1/8" and 3/16", 6 pcs. of 1/4", and 3 pcs.
ALL76160
Butt Connectors ALL76000 ALL76010 ALL76020 each of 3/8" and 1/2"
#6 Hole ALL76001 ALL76011 ALL76021
#8 Hole ALL76002 ALL76012 ALL76022 Individual Sizes (Pack of 20)
#10 Hole ALL76003 ALL76013 ALL76023 Part No. Description Part No. Description
Ring Terminals
1/4" Hole ALL76004 ALL76014 ALL76024 ALL76162 1/8" ALL76165 3/8"
5/16" Hole ALL76005 ALL76015 ALL76025 ALL76163 3/16" ALL76166 1/2"
3/8" Hole ALL76006 ALL76016 ALL76026 ALL76164 1/4" ALL76167 3/4"
Male 1/4" ALL76007 ALL76017 ALL76027
Blade Terminals
Female 1/4" ALL76008 ALL76018 ALL76028
Grommet Set
ALL18360
Grommets are perfect for protecting
wiring and hoses that pass through
panels up to 1/16" (.062") thick. Kit
includes 36 grommets (6 of each
Vinyl-insulated terminals are the most popular crimp size: 1/4", 5/16", 3/8", 1/2", 5/8", and 11/16").
terminal used in a variety of applications. PVC insulated Grommets are also available in size specific ALL11041
sleeve is securely attached to terminal and has a flared 10-packs.
end for easy installation. Package of 20. Part No. Grommet Hole I.D. Panel Hole I.D.
Vinyl-Insulated Terminals 22-18 16-14 12-10 ALL18362 3/16" 5/16"
Butt Connectors ALL76030 ALL76040 ALL76050 ALL18363 1/4" 3/8"
#6 Hole ALL76031 ALL76041 ALL76051 ALL18364 5/16" 7/16"
#8 Hole ALL76032 ALL76042 ALL76052 ALL18365 3/8" 1/2"
#10 Hole ALL76033 ALL76043 ALL76053 ALL18366 1/2" 5/8"
Ring Terminals
1/4" Hole ALL76034 ALL76044 ALL76054 ALL18367 5/8" 7/8"
5/16" Hole ALL76035 ALL76045 ALL76055 ALL18368 11/16" 1"
3/8" Hole ALL76036 ALL76046 ALL76056
Blade Terminals
Male 1/4" ALL76037 ALL76047 ALL76057 Test Light
Female 1/4" ALL76038 ALL76048 ALL76058
ALL76215
Quickly diagnose electrical problems by
testing for current in electrical circuits,
relays, switches, or fuses. Handheld
test light has a 36" lead wire
with an insulated clip which
Heat-shrink terminals protect connections from fastens to a common
corrosion. Terminals with attached shrink tube are ground and a sharp piercing point to probe insulated
adhesive lined to grip wire insulation and conform to wire or terminals. Indicator light illuminates to identify
crimp when heated, sealing out moisture. Package of 10. powered circuits in 6-12V systems.
Heat-Shrink Terminals 22-18 16-14 12-10
Butt Connectors ALL76060 ALL76070 ALL76080 Nylon Flush-Fit Tie Wraps
#6 Hole ALL76061 ALL76071 ALL76081
#8 Hole ALL76062 ALL76072 ALL76082
Flush-fit design ties have the
#10 Hole ALL76063 ALL76073 ALL76083 excess portion of the tie exit in the
Ring Terminals same direction as the original tie,
1/4" Hole ALL76064 ALL76074 ALL76084
5/16" Hole ALL76065 ALL76075 ALL76085 helping to eliminate the protruding
3/8" Hole ALL76066 ALL76076 ALL76086 sharp portion remaining as found
Blade Terminals
Male 1/4" ALL76067 ALL76077 ALL76087 in standard ties. Package of 100.
Female 1/4" ALL76068 ALL76078 ALL76088
Part No. Description
ALL14395 8" Long
ALL14396 11" Long

50 2023 - 2024 HOT ROD AND EARLY MUSCLE

Nylon Tie Wraps 6-Circuit Fuse Block
Secure electrical wiring, ALL76180
gauge lines, and roll bar
This fuse block is a great
padding. 100 per bag. Nylon
power distribution starting
tie wraps are available in
point for up to six individual
black, natural, red, blue,
circuits which are protected by
yellow and purple nylon.
ATC/ATO style fuses (sold separately). Block Fuses not
Black Red features a #10 power supply and six 1/4" male included.
Part No. Description Part No. Description spade terminals for individual circuit connections.
ALL14120 3-3/4" ALL14126 7-1/4" Fuse block is rated at 150 amps at 12 volts, maximum
ALL14122 6" ALL14127 14-1/4" of 25 amps per circuit.
ALL14123 7-1/4"
Blue
ALL14124 11-1/4"
ALL14125 14-1/4" Part No. Description Fuse Terminals
ALL14128 7-1/4"
Natural
Terminals attach to
ALL14129 14-1/4"
cartridge -style fuses installed
Part No. Description ALL76090 ALL76091
ALL14130 3-3/4"
Yellow in fuse blocks to create an
ALL14132 6" Part No. Description additional circuit to power accessories. Terminals slide
ALL14133 7-1/4"
ALL14136 7-1/4" over the protected leg or “fused” side (side of fuse block
ALL14137 14-1/4" that does not have power when fuse is removed) of the
ALL14134 11-1/4"
ALL14135 14-1/4" Purple fuse. Package of 5.
Part No. Description Part No. Description
ALL14138 7-1/4" ALL76090 Mini Fuse Style Terminal
ALL14139 14-1/4" ALL76091 ATC/ATO Fuse Style Terminal

Nylon Tie Wraps with Buss Bars

Mounting Holes Buss bars create a remote
Built-in tab with mounting hole to power source for powering
easily secure wiring harnesses, hoses, multiple accessories. Bar
or cables to a panel with rivets or other features a 1/4” power supply
fasteners. Package of 25. stud and 12 separate #8
connections. Insulated base
Part No. Description
ALL14390 8" with #10 Hole
measures 5-1/4” x 1-1/8” wide
ALL14391 11" with #10 Hole and can be mounted with two
ALL14392 14" with 1/4" Hole #10 (3/16”) fasteners. Bars
include a removable protective cover and power supply
Wire Tie Mounting Bases boot. Protective covers are sold separately.
Self-adhesive mounting bases provide a Part No. Description
ALL76170 Red Buss Bar Kit
location for attaching standard wire ties
ALL76172 Black Buss Bar Kit
to secure wiring, cables and hoses. Bases
mount to clean flat surfaces and accept 75#
and smaller wire ties. Package of 10. Junction Block
Part No. Description ALL76146
ALL14116 3/4" x 3/4" Mounting Base Junction block with single 10mm
ALL14117
1-1/8" x 1-1/8" Mounting x 1.5 thread (3/8") stud offers
Base a location to power multiple
accessories from one power
30-Amp Relays supply or a common place to locate
Relays are commonly used to control higher ground wires. Block features two mounting holes for #8
amperage components such as electric fasteners for installation on firewall or panel.
fuel pumps, cooling fans, or water pumps
rated up to 30 amps. Relays allow the 30-Amp Circuit Breaker
use of a lower amp switch to turn on or
control a component with a higher amp ALL76212
draw. A connector with a wiring harness and Circuit breaker protects electrical
installation instructions are included. circuits similar to fuses but will cool
Part No. Description and self-reset to maintain power to
ALL76186 Standard Relay critical items such as headlights or
ALL76188 Weatherproof Relay ignition systems. Use circuit breaker to power
accessories in a race car and to keep constant
power to ignition. Steel case and mounting bracket
provide durability and ease mounting to panels. #10-32
threaded stud terminals include nuts and lock washers.

2023 - 2024 HOT ROD AND EARLY MUSCLE 51

Battery Boxes Battery Cable Kits
Universal lightweight steel battery Kits have everything needed
boxes may be welded or bolted to to connect a top post-style
the frame. Boxes are available battery to starter and include
in two sizes and include hold- fine-stranded, rope-lay
down hardware. copper cable for best current
carrying capabilities. Kits are ALL76110
Part No. Description offered with traditional red and black cables or all black
ALL76100
ALL76100 12" Wide x 7-1/4" Deep cables.
ALL76101 10" Wide x 7-1/4" Deep Single Battery Kits Include:
• 15' Positive Battery Cable
Replacement Components • 2' Negative Battery Cable
Part No. Description • 1 Pair Battery Terminals
ALL99175 J-Bolts with Nuts, 1 Pair • 8 Pcs. Ring Terminals (4) 5/16" & (4) 3/8"
ALL99177
Hold-Down Strap for • 8 Pcs. Heat Shrink Tubing
ALL76100
Part No. Description
Hold-Down Strap for
ALL99176 ALL76110 2-Gauge Cable Kit with Red and Black Cables
ALL76101
ALL76111 2-Gauge Cable Kit with All Black Cables
Bolt-On ALL76114 4-Gauge Cable Kit with Red And Black Cables
ALL76115 4-Gauge Cable Kit with All Black Cables
Battery Boxes
Battery box has multiple 1/2" Dual Battery Kits Include:
mounting holes to bolt box • 25' Positive Battery Cable
directly to the frame rail, inner • 8' Negative Battery Cable
fender or firewall. Box can also • 2 Pair Battery Terminals
be fastened to round tubing using • 14 Pcs. Ring Terminals (7) 5/16" & (7) 3/8"
clamp-on ballast brackets. Constructed ALL76103 • 14 Pcs. Heat Shrink Tubing
of 13-gauge steel, measures 11" wide x 7"
Part No. Description
deep and includes 3/8" battery hold-down hardware. ALL76112 2-Gauge Cable Kit with Red and Black Cables
Part No. Description
ALL76102 Clear Zinc Battery Cables
ALL76103 Black
Pre-made black cables are built using PVC insulated 4
gauge copper stranded wire and include ring terminals
Stainless Steel Drop-Out on each end with 3/8” mounting holes. Cables are ideal
Battery Box for adding additional ground connections or installing
remote starter solenoids. Dimensions listed are
ALL76105 approximate center to center of terminal ends.
The perfect battery box where
battery mounts under floor. Part No. Description
ALL76341-10 10”
Eases battery service and ALL76341-15 15”
replacement. Box is 10-1/2" wide x ALL76341-20 20”
7" deep x 9-1/2" tall and will accept most ALL76341-25 25”
standard batteries. ALL76341-35 35”
ALL76341-40 40”
Battery Hold-Down Kit for
Ground Straps
Optima The number one problem with electrical systems is often
ALL76107 related to poor ground connections. Straps are similar
Aluminum hold-down kit provides an to OE applications which is perfect for various 6 or 12-
attractive option for keeping Optima volt grounding applications. Flexible, braided copper
34/78 series batteries in place. 12-gauge ground straps have
Battery not included. non-insulated ring terminals on each end.
Ground Straps with 1/4" Ring Terminals:
Plastic Battery Box Part No. Description
ALL76099 ALL76328-6 6”
ALL76328-9 9”
Two-piece battery box fits up ALL76328-12 12”
to group 27 size batteries and ALL76328-18 18”
includes nylon strap with plastic ALL76328-24 24”
mounting brackets. Box may be
bolted through the bottom for more Ground Straps with 3/8" Ring Terminals:
permanent mounting. Cover is designed Part No. Description
with quick-lock snaps to keep cover securely ALL76330-6 6”
in place. Outside box dimensions 16-1/8" x 9-5/8" x 10- ALL76330-9 9”
7/8" tall. Inside dimensions 12-3/4" x 7-1/4" x 10" tall. ALL76330-12 12”
ALL76330-18 18”
ALL76330-24 24”

52 2023 - 2024 HOT ROD AND EARLY MUSCLE

Solder Slugs Gold Battery Terminals
Use solder slugs to secure ring terminal Terminals are machined from
ends to battery cable. Individual pieces solid brass stock, 24k gold-plated
are the correct amount of solder to be for maximum conductivity and
used for each size of cable. Package feature 5/16" fasteners to secure
of 10. battery cables with ring terminal ends. ALL76120
ALL76131
Part No. Description Top-post terminals have additional
ALL76131 Slug for 2-Gauge Terminals provisions for attaching accessory or
ALL76132 Slug for 4-Gauge Terminals ground wires for a clean appearance.
ALL76133 Slug for 6-Gauge Terminals Sold in pairs.
Part No. Description ALL76122
ALL76120 Top Post
Ring Terminals ALL76122 Side Post
Use to repair or build custom-length
battery cables, or when installing a
battery disconnect switch. Terminals Battery Terminal Covers
may be crimped or soldered to wire.
Sold in pairs with heat-shrink sleeving for a ALL76150
waterproof connection. Covers slip over battery cables
and cover battery terminals to
Wire Size 5/16" Hole 3/8" Hole 1/2" Hole
2 Gauge ALL76116 ALL76117 ALL76128
prevent accidental shorting. Fit most top post mount
4 Gauge ALL76118 ALL76119 ALL76129 batteries. Required by many sanctioning racing bodies.
Package of 2 includes one black and one red cover.

Impact Crimper
ALL76135 Battery Disconnect Boots
Excellent for permanently crimping standard Protect the terminals on
cable ends to battery cables. battery disconnects from
being accidentally shorted.
Part No. Description
Ground Stud ALL76152 Red, 2 Pack
ALL76147 ALL76153 Black, 2 Pack

Steel ground stud welds to round tubing providing

a secure location for mounting a negative battery
cable. Weld stud directly to the chassis or create Battery Cable Boots
a secure ground wire location in the foot box or ALL76154
engine compartment. Stud accepts battery cables Battery cable boots can be used
with 3/8" ring terminals. for a variety of applications
including covering battery
terminals on smaller terminal
batteries and starter solenoid connections. Boots have
an opening that will accept up to 2-gauge cable. Sold as a
pair, one red, and one black.

Battery Cable Through Stud

ALL76142
Run battery cable through firewall
or any body panel safely. 3/8"-16
thread.

Firewall Cable Bushing

Mounts securely to the firewall and locks
onto the wire for a waterproof and
vibration-proof seal.
Part No. Description
ALL76137 2 Gauge
ALL76138 4 Gauge

2023 - 2024 HOT ROD AND EARLY MUSCLE 53

Battery Disconnect Switches Street Performance Chevy
Battery disconnect switches shut down the vehicle in Mini-Starter
an emergency or secure it when not in use. Offered as a
single- and double-pole version. ALL80525
SB Chevy clockable starter has
Single-Pole Disconnect has two terminals and is twelve mounting positions and is
recommended for vehicles not using an alternator that a good choice for street engines including
needs the ability to be shut down in an emergency or crate motors. Starter has 1.4kw permanent
when securing a vehicle by shutting off all power to the magnet and weighs only 7.5 lbs. Clears most kickout
vehicle. oil pans and works with 153- and 168-tooth flywheels
or flexplates. Use with compression ratios up to 10.5:1.
Note: When attempting to shut down a vehicle with an Mounting bolts and shim kit included.
alternator using a single-circuit battery disconnect, the
alternator may continue supplying power to the vehicle
ignition system, allowing vehicle to continue to run. Chevy Mini-Starter
ALL80520
Double-Pole Disconnect has four terminals with two It’s smaller, lighter, and offers
separate circuits, which is recommended for vehicles several mounting options. Perfect
with an alternator that need to be shut down in the event starter for race cars with clearance
of an emergency. problems in the chassis or around
header pipes. Fits Chevy 153- and
Standard-Duty Switch with Decal 168-tooth applications. Starter
Standard-duty switch mounts in a 3/4" hole in has 1.4kw permanent magnet,
a panel up to 1/4" thick and includes a decal to weighs just 9.6 lbs. and includes bolts
indicate on/off position. Switch has 3/8"-24 and shims.FF O

N
O
terminals and is rated at 175 amps
continuous duty. Double-pole switch GM LS Mini-Starter
also has #10-32 studs rated at 20 amps
continuous duty. ALL80516
Block mount GM LS gear reduction
Part No. Description
ALL80156 Switch w/Decal (Single Pole) mini-starter works with 168-tooth
ALL80157 Switch w/Decal (Double Pole) flywheels and provides increased
ALL99045 Replacement Decal ALL80156 starting performance over OE-style
starters. Starter features a 3-position
Battery Disconnect mounting block which allows the starter motor
to be rotated for additional clearance around exhaust and
Switch with frame obstructions. A high-torque, 3 HP motor combined
Removable Key with 3.75:1 gear reduction is ideal for engines with up to
Battery disconnect 11:1 compression ratio.
features a removable
metal key allowing vehicle ALL80152 Universal Heat Wrap
to be shut down in the event of an
emergency or to secure vehicle when ALL34238
not in use. Disconnect is rated at 160 Heat-resistant material
amps continuous duty and features measures 7" x 22", making
two 3/8”-24 terminals for installing it ideal for wrapping starter
battery cables with ring terminals. motors or other components
Ideal for use in street cars as a theft that are close to high-heat areas.
deterrent. Wrap features a reflective material on one side to protect
against radiant heat and includes two 24" long stainless
Part No. Description
ALL80152 Switch w/Decal steel tie wraps for securing material.
ALL80153
ALL80153 Switch w/Panel
Starter Solenoid
Chevy Mini-Starter ALL76203
ALL80515 Ford-style solenoid is perfect for use
3HP high-torque gear reduction, with high torque racing starters. Flat
block mount Chevy mini-starter. base eases mounting, and a remote
In-line mounting block will fit under-hood starter switch or timing
either 153- or 168-tooth flywheels light hook-up can be easily adapted.
and has rotation holes for added Solenoid is offered separately, or may
clearance. Mounting bolts and shim be ordered with installation kit (ALL76202) that includes
kit included. wiring, terminals, and hardware.

54 2023 - 2024 HOT ROD AND EARLY MUSCLE

Solenoid and Installation Kit Street/Strip Distributors
ALL76202 These distributors are a great choice for
Relocate starter solenoid away from street/strip applications. A performance
direct engine heat to provide easy distributor combined with the added
access and eliminate hot start problems benefit of an adjustable vacuum advance
common on General Motors vehicles. An for street use. Simple three-wire
under-hood starter switch can also be connection only requires a 12V power source
added. Includes standard-duty, Ford- and an external coil such as the ALL81232,
style solenoid, mounting screws, which is designed specifically for ready
terminals, and wiring kit. to install distributors. The small-bodied
design is perfect for early muscle cars
where firewall clearance is often a concern.
Quick-Connect Battery Charging Posts CNC-machined 6061-T6 aluminum housing
Two-piece, color-coded has a sealed upper support bearing and an
connectors make safe, out-of-car extra-long lower bronze bushing for smooth
connection to battery charger operation and accurate timing at higher RPMs.
quick and easy. Female ends Distributors include a molded cap and rotor with
have 1/2"-20 threaded studs that brass and stainless steel contacts, a vacuum
connect to battery cables and advance lock out, a mechanical curve kit with advance
pass through a 5/8" hole in a panel springs and stop bushings, spark plug wire retainer cap
up to 1/8" thick. Male ends of connectors fit on battery with screws and instructions.
charger cables. Shafts are tapered for tight, secure Part No. Description
connections. ALL81222 Chevrolet V8*
Part No. Description ALL81240 Ford V8 221-302
ALL76300 Red ALL81242 Ford V8 351W
ALL76310 Black ALL81244 Ford 351C, 400C/M, 429-460
ALL81252 Ford V8 332-428 FE
Battery Charging Posts ALL81254 Pontiac V8 326-455

ALL76139 *Excluding 348-409 CID

Mount remote charging posts through a
Note: Distributors include melonized drive gears compatible with most flat tappet or hydraulic
body panel for access to battery terminals and roller camshafts. If used with a mechanical roller camshaft, a bronze or other compatible gear
quick, easy battery charging. Posts have 3/8" studs and should be used as recommended by cam manufacturer.
have color-coded caps for safety. Posts require a 1.25"
mounting hole. High-Performance Distributors
for Use with Ignition Box
Charging Post Bracket This high-performance distributor is
ALL60064 an excellent choice for many types of
Securely mount Allstar charging motorsports. Requires an aftermarket
posts on vehicles where battery is not easily ignition box (such as an MSD, Accel, FAST, or
accessible. Pre-drilled holes allow quick mounting to Mallory) and an external coil such as ALL81230.
frame or body. Double-D hole design positions posts Housing is CNC-machined 6061-T6 aluminum
close together, but provides enough room for charging with an upper support bearing and an extra-long
or jumper cable clamps. Charging posts sold separately. lower bronze bushing for smooth operation and
(ALL76140 and ALL76141). accurate timing at higher RPMs. Distributor
includes a molded cap and rotor with brass and
GM Single-Wire Alternators stainless steel contacts, a mechanical curve kit
Completely remanufactured GM with advance springs and stop bushings, manifold
Delco single-wire alternators are gasket, housing O-rings, spark plug wire retainer
easily hooked-up. Housings are cap with screws, and instructions.
natural finish aluminum. Choose Part No. Description
from 63- or 80-amp capacities. ALL81220 Chevrolet V8*
ALL81216 Chevrolet V8* w/Vacuum Advance
Part No. Description ALL81221 Chevrolet V8* w/Adjustable Collar
ALL80500 63-Amp, Full Size, 10.3 lbs. ALL80500 ALL81218 Chevrolet V8* w/Adjustable Collar, Dual Pick-Up
ALL80501 80-Amp, Compact Size, 9 lbs. ALL81246 Ford V8 221-302
ALL81248 Ford V8 351W
GM Single-Wire Chrome ALL81250 Ford V8 351C, 400C/M, 429-460
Alternator
*Excluding 348-409 CID
ALL80505
Note: Distributors include melonized drive gears compatible with most flat tappet or hydraulic
Chrome finish, single-wire GM roller camshafts. If used with a mechanical roller camshaft, a bronze or other compatible gear
alternator with aluminum housing should be used as recommended by cam manufacturer.
has a 100-amp capacity.

2023 - 2024 HOT ROD AND EARLY MUSCLE 55

Chevy HEI Remote Mount LS Coil
Performance Distributors Brackets
Distributors have high-output coils and Designed for remote
adjustable vacuum advances, perfect for mounting LS Coils. Black
upgrading stock HEI distributors for higher anodized billet aluminum
RPM. Fit small and big block Chevy (except 348 brackets come complete ALL 26217
and 409). Housings are CNC-machined 6061- with stainless hardware and standoffs for easy removal.
T6 aluminum with an upper support bearing Part No. Description
to provide accurate timing at higher RPM. ALL26216 Fit Delco D580, LS1/LS6 Coils (ALL81400)
Include snap-on spark plug wire retainer and Fit Delco D581 and D510C, LS2,LS3,LS7 Coils (ALL81402 &
ALL26217
instructions. ALL81403)
Part No. Description
ALL81200 Distributor with Red Cap CD Ignition Coil
ALL81202 Distributor with Black Cap
ALL81200
ALL81230
High-output ignition coil is specifically
HEI Connectors designed for use with capacitive discharge
The proper connector when ignition systems. 40,000 volt coil is
repairing or wiring HEI ignition recommended for use with Allstar
systems. Connectors have a built-in Performance HP series distributors.
retaining clip same as originals to Sturdy, high-impact housing is epoxy filled to protect
secure connector to ignition cap. The included ALL81214
against vibration. Extruded aluminum bracket eases
pigtail wires are also the correct gauge for easy mounting. Mounting hardware, anti-vibration mounting
installation. pads, ring terminals, and high,temperature silicone boot
Part No. Description are included.
ALL81214 12V Ignition Connector
ALL81215 Tach Connector
High-Output Coil
Chevy Distributor Hold-Down ALL81232
Aluminum hold-down keeps High output coil is specifically designed
distributor secured at high RPM. Fits for use with the high-output
small or big block Chevy V8 and 90° Chevy inductive storage ignition module
V6. Stainless steel stud, nut and washer are found in Allstar Performance
included. Choose blue, clear, or red anodized. Street/Strip series distributors. Delivering up to 40,000
Part No. Description volts, this coil has a male secondary tower which offers
ALL27502 Blue Chevy Distributor Hold-Down superior boot and terminal retention and brass primary
ALL27503 Clear Chevy Distributor Hold-Down terminals for maximum conductivity. Includes mounting
ALL27504 Red Chevy Distributor Hold-Down hardware, ring terminals and high temperature silicone
boot.
LS Ignition Coils
Canister-Style Ignition Coil
ALL81234
45,000 volt, oil-filled coil for electronic
breakerless ignitions has low primary
resistance and 112:1 turn ratio for improved
ALL81400 ALL81401 ALL81402 ALL81403 throttle response and more power at higher
Direct replacement 40,000V coils are a good choice when rpms. Coil fits all standard O.E.M. brackets or
upgrading the OE ignition system in high-performance Allstar ALL81236 coil bracket.
applications or when power adders are used. Sold each.
Part No. Description Coil Mounting Bracket
ALL81400 1997-05 LS1/LS6 (Delco D580)
ALL81401 1999-07 4.8/5.3/6.0L Truck (Round-Style Delco D585) ALL81324
ALL81402 1999-07 4.8/5.3/6.0L Truck (Square-Style Delco D581) Aluminum canister-style coil mounting
ALL81403 2005-13 4.8/5.3/6.0/6.2/7.0L (Delco D510C/D514A) bracket features a flat mount for securing
to a flat panel or firewall. Bracket includes a
LS Coil Mounting Brackets tension screw to secure coil in bracket before mounting.
ALL26212
OE-style steel mounting Universal Coil Mounting Bracket
brackets fit OE and ALL81326
fabricated valve covers Universal bracket is an OE-style bracket
with factory mounting that mounts canister style coils to some
bosses and have a black popular V8 intake manifolds or may
epoxy-coated finish. Brackets are be used to mount coil to a flat panel or
for use with Delco D580 Coils (ALL81400). firewall. Bracket includes a tension screw to secure coil
in bracket before mounting.
56 2023 - 2024 HOT ROD AND EARLY MUSCLE
SB Chevy Spark Plug Wire Loom Set Balancing Plate
ALL81340 ALL26120
Polished aluminum spark plug wire loom fits Plate is installed between crankshaft
wires up to 9.5mm. Includes flange and the flywheel, allowing a
mounting hardware. Engines with popular internally balanced Chevy 350
center bolt-style valve covers flywheel to be used with an externally
require ALL81341 mounting kit. balanced 400 crankshaft.
Package of 2. NOTE: These are not designed to be used with an automatic transmission flexplate.
NOTE: May not clear oil dipstick or exhaust manifolds on some
later model engines with “log” style manifolds.
Plastigage® Kit
Related Item ALL96475
Part No. Description Plastigage strings are a simple and
ALL81341 Mounting Kit for Centerbolt Covers accurate way to verify crankshaft,
ALL81341
main and rod bearing clearances.
Kit includes two green .001"
Spark Plug Wire Separator to .003" and one red .002"
Set to .006" (12" long strings)
individually packaged inside
ALL81345 calibrated sleeves. Detailed instructions are included.
Black plastic set will fit up to 9mm
wires. Includes two of each 2-, 3- and Oil Filter Adapters
4-hole separators.
Oil filter adapters are
OE-style replacement
Spark Plug Wire Retainer mounts for securing
ALL81350 oil filter to engine block or ALL92003
No more melted plug wires from hot oil pan when rebuilding or
exhaust. These aluminum retainers will neatly replacing an engine ALL92000

mount separated 4-wire sets to the front or rear

of cylinder head. Package of 2.
ALL92004
LS Oil Pan Kits Part No. Description
1968-96 SB Chevy Including LT1 and 1968-90 Gen IV BB
Oil pan kits ease the ALL92000 Chevy Engines, Aluminum adapter with bypass valve bolts
installation of LS series to block and has 13/16"-16 threads to accept oil filter.
engines into early production ALL92001 Bolt kit for ALL92000
vehicles by providing Gen V and VI 1991-Up BB Chevy Engines, Adapter threads
additional clearance between ALL92004 into block with 1"-12 threads and has 13/16"-16 threads to
accept oil filter.
the oil pan and frame crossmember. Kits include oil pan, 1997-2017 LS Series Engines Hex body adapter threads into
pick-up tube, gaskets, and mounting hardware required ALL92005
oil pan.
for installation. 1997-2017 LS Series Engines, Round body with internal hex
ALL92006
Note: These kits may not fit all applications, additional motor mount adapters and possible adapter threads into oil pan.
frame modification may be required for installation in some vehicles. Fits Most SB Ford 302-351W Engines, Adapter threads into
ALL92003 block with 1-1/16"-12 threads and has 3/4"-16 threads to
Part No. Description
accept oil filter.
ALL26240 Cast Aluminum
ALL26241 Cast Aluminum—Black
Chevy Remote Oil Filter Adapter
SB Chevy Rear Main Seal Adapters ALL92025
Billet aluminum adapter allows Aluminum adapter installs in place of
installation of a two-piece style the OE-style oil filter adapter,
crankshaft seal and early (pre-1986) providing 1/2"NPT inlet and
crankshaft into a 1986 and newer outlet ports for connecting
SB Chevy (pre-LS) engine. Adapters ALL26125 to an external oil filter mount. Adapter is commonly used
include mounting hardware. when header clearance does not allow easy access to
Alignment tool ALL26127 (sold separately) is block mounted oil filter. Adapter fits most 1968-96 SB
recommended to ensure proper installation Chevy and 1968-90 Gen IV BB Chevy engines and includes
and centering of adapter plate. mounting hardware and O-rings.
Part No. Description ALL26127
ALL26125 Seal Adapter for Early (Pre-’86) Oil Pan
ALL26126 Seal Adapter Ffor Late (86'-Up) Oil Pan
ALL26127 Alignment Tool

2023 - 2024 HOT ROD AND EARLY MUSCLE 57

Remote Oil Filter Mount Kit LS Timing Cover Conversion Kit
ALL92027 ALL90090
Kit includes a machined LS timing cover conversion kit adapts
billet aluminum mount a standard small block Ford distributor
for relocating an oil into CT525 crate and LS series engines,
filter to a location that allowing adjustment of timing and
is easier to access and the mechanical advance curve and
protected from possible also provides an alternative to
damage. Mount features installing complete computer and
top mounted -12 ORB fuel injection systems when placing
ports for easy connection and hose routing, a 1/8" NPT a late model LS engine into an older street
pressure port and multiple oil filter fittings. Fittings performance vehicle. Enjoy the performance and
included are 3/4"-16, 13/16"-16, and 1-1/8"-16 for most durability of the GM LS series engine with the simplicity
popular 3-5/8" O.D. oil filters. and tune-ability of a distributor and carburetor. Kit
includes all internal components and new timing cover
Engine Oil Pressure Primer Tank for converting LS series engines to utilize a standard
distributor ignition system and a carburetor with a belt
ALL10535 driven or electric fuel pump.
Primer tank supplies initial oil
to the oil pump in engines
equipped with a crank
SB Chevy Timing Cover
driven oil pump. Fill primer ALL90010
tank with engine oil then Excellent replacement for distorted
apply compressed air to and leaky timing covers. Cover fits most
force the fluid throughout popular standard small block Chevrolets.
the engine via the oil pressure
sender/switch port to pre-lube
the entire engine, including the oil
pump. Tank features fill cap with safety pressure release Aluminum Timing
slot (sealed by O-ring), an easy to read pressure gauge
and a quarter turn on/off supply valve. The oil supply line Covers
is a durable 90" long steel braided hose with -4AN ends Polished cast aluminum
and includes a fitting with male 1/8"-27NPT threads. covers resist warping and
Adapter fittings sold separately. leaking that is common with
OE-style stamped steel
covers. Recessed mounting
SB Chevy Oil Restrictors holes are designed for button ALL90008
Oil restrictors reduce the amount of oil head fasteners (ALL99390) for proper
flow to the top of the engine, reducing installation. Covers clear most double
the risk of evacuating the oil pan in continuous roller-style timing chains.
ALL90070
high rpm engines while allowing more oil to be
directed to the main and rod bearings. ALL90009
Part No. Description
Restrictors have a .055" I.D. hole and ALL90008 SB Chevy
include two extra O-ring seals. ALL90009 BB Chevy
Package of 2.
ALL90071
Part No. Description Related Part
ALL90070 SB/BB Chevy, Aluminum with Hex Head Part No. Description
ALL90071 SB Chevy Bowtie Block, Steel with Allen Head ALL99390 Timing Cover Fasteners

Note: Not recommended for hydraulic lifter engines.

Timing Cover Seals
GM LS Oil Galley Plug Seal works with stamped steel or
Galley plug commonly referred to as aluminum covers.
a “Barbell” are used by the factory ALL87280
to divert oil to the factory oil filter Part No. Description
and prevent unfiltered oil from ALL87280 SB Chevy
ALL87282 BB Chevy
circulating through the engine.
The original GM barbells are a
nylon material that may become
brittle over time and should be replaced when performing
a rebuild or upgrades.
Part No. Description
ALL90067 OE-Style Nylon
ALL90068 Billet Aluminum

58 2023 - 2024 HOT ROD AND EARLY MUSCLE

Timing Pointers Small Fill Plug Kits
Black anodized billet aluminum timing pointers Kits include a weld-in or bolt-in bung and an easy grip
are adjustable to precise timing increments. O-ring cap with positive seal. Kits are often used as an
Chevy pointers are designed for use with inspection plug or a filler plug. Small fill plugs have a
stamped steel covers; longer hardware will 1-3/8" opening with 1-1/2"-12 threads.
be required if using a cast aluminum cover. ALL90020 Kit with Aluminum Weld-In Bung
Part No. Description
Part No. Description
ALL90023 SB Chevy 6-1/4" Dia. Balancers
ALL36160 Silver Kit
ALL90020 SB Chevy 6-3/8" Dia. Balancers
ALL36164 Black Kit
ALL90021 SB Chevy 7" Dia. Balancers
ALL36165 Red Kit
ALL90024 SB Chevy 7-1/4" Dia. Balancers
ALL36166 Polished Kit
ALL90025 SB Chevy 8" Dia. Balancers
ALL90026 BB Chevy 6-1/4" Dia. Balancers Kit with Steel Weld-In Bung
ALL90022 BB Chevy 7" Dia. Balancers ALL36160
ALL90027 BB Chevy 8" Dia. Balancers Part No. Description
ALL90034* SB Ford SVO B, 3/8" Bolt ALL36161 Silver Kit
ALL90035† SB Ford SVO C, 3/8" Bolt ALL36167 Black Kit
ALL90036* SB Ford Stock B, 5/16" Bolt ALL36168 Red Kit
ALL90037† SB Ford Stock C, 5/16" Bolt ALL36169 Polished Kit
ALL36167
*11-O’Clock Tab Position, Will Not Fit Cleveland Engines Kit with Aluminum Bolt-In Bung
†10-O’Clock Tab Position, Will Not Fit Cleveland Engines
Part No. Description
ALL36180 Silver Kit
SB Chevy Fabricated ALL36181 Black Kit
ALL36182 Red Kit
Aluminum Valve ALL36183 Polished Kit
Covers
ALL36182
ALL26170 Weld Bungs
TIG-welded covers
Weld-on bungs are available in 6061 aluminum or
are lightweight with a
mild steel and allow additional fittings to be added to
thick rail for gasket support.
radiators, or oil pans and building of custom tanks or
other components.
Chevy LS Fabricated Female NPT
Aluminum Valve Size
1/8"-27NPT
O.D.
3/4"
Aluminum
ALL50740
Steel
ALL50750
Covers 1/4"-18NPT 7/8" ALL50741 ALL50751
Fabricated valve covers 3/8"-18NPT 1" ALL50742 ALL50752
for most 1997-2005 LS1/LS6 engines 1/2"-14NPT 1-1/4" ALL50743 ALL50753
ALL26211
feature a thick billet rail, an O-ring sealed threaded fill 3/4"-14NPT 1-3/8" ALL50744 ALL50754
1"-11-1/2NPT 1-5/8" ALL50745 –
cap and include O-ring style gaskets and mounting bolts.
Valve covers have an inside height of 2-1/4" to clear most Male AN
aftermarket valvetrain. Coil mounting brackets sold
separately. Flange
Size Thread O.D. Aluminum Steel
Part No. Description -4AN 7/16"-20 3/4" ALL50760 ALL50770
ALL26210 Valve Covers without Coil Mount -6AN 9/16"-18 7/8" ALL50761 ALL50771
ALL26211 Valve Covers with Coil Mount -8AN 3/4"-16 1" ALL50762 ALL50772
Coil Mounting Brackets 1997-2005 LS1/LS6 Coils Steel -10AN 7/8"-14 1-1/8" ALL50763 ALL50773
ALL26212 Stamped Brackets for Use with Delco D580 Coils (ALL -12AN 1-1/16"-12 1-3/8" ALL50764 ALL50774
81400) -16AN 1-5/16"-12 1-5/8" ALL50765 ALL50775
-20AN 1-5/8"-12 1-3/4" ALL50766 ALL50776

Female AN ORB
Size Thread O.D. Aluminum
BB Chevy Fabricated -4AN 7/16"-20 3/4" ALL50780
-6AN 9/16"-18 7/8" ALL50781
Aluminum Valve -8AN 3/4"-16 1" ALL50782
Covers -10AN 7/8"-14 1-1/8" ALL50783
TIG-welded valve covers with ALL26177 -12AN 1-1/16"-12 1-3/8" ALL50784
a thick billet rail are available with or without breather -16AN 1-5/16"-12 1-5/8" ALL50785
holes for custom modification such as vacuum pump
fittings. Recessed bolt pockets and tall design to clear
most aftermarket valvetrains. Hardware included.
Part No. Description
ALL26176 Valve Covers without Holes
ALL26177 Valve Covers with Holes

2023 - 2024 HOT ROD AND EARLY MUSCLE 59

SB Chevy “Ram Horn” Header Wrap
Exhaust Manifolds Reduce under hood temperature
while containing header tube
ALL34200 heat for increased power.
“Ram Horn” manifolds have Fiberglass woven wrap is
increased exhaust flow over available in natural or black rolls.
traditional manifolds and added
steering shaft clearance. Ideal for 1" Wide Rolls 2" Wide Rolls
street rods and classes requiring cast iron exhaust
Part No. Description Part No. Description
manifolds. Sold in pairs. ALL34240 Natural 15' ALL34244 Natural 15'
ALL34241 Natural 25' ALL34245 Natural 25'
SB Chevy Header Gaskets ALL34242 Natural 50' ALL34246 Natural 50'
Durable reinforced ALL34243 Natural 100' ALL34247 Natural 100'
ALL34250 Black 15' ALL34254 Black 15'
steel core and
ALL34251 Black 25' ALL34255 Black 25'
graphite composite ALL34252 Black 50' ALL34256 Black 50'
ALL87262
gaskets remain soft ALL34253 Black 100' ALL34257 Black 100'
and pliable to conform to header and head surfaces,
providing an excellent, long-lasting seal. Sold each.
Stainless Steel Cable Ties
Part No. Description
ALL87260 1-5/8" Square Port (Stock) Part No. Description
ALL87262 1-3/4" D-Port (Standard) ALL34262 7-1/2" Long, Package of 8
ALL87264 Spread Port (Staggered Bolt Pattern) ALL34264 14-1/2" Long, Package of 4
ALL87266 Crate Engines (Non LS/Fast Burn)
ALL87268 LS Series Engines (Excluding LS7) Universal Heat Wrap
ALL34238
Electric Heat resistant material
Exhaust Cutouts measures 7" x 22", making it
Eliminate the need to manually uncap the exhaust. 12V ideal for wrapping starter motor,
Electric cut out bolts to a standard 3-bolt collector flange or other components that are close
and uses a powerful geared to high heat areas. Wrap features a reflective material on
motor to open and close one side to protect against radiant heat and includes two
a butterfly valve to direct 24" long stainless steel tie wraps for securing material.
exhaust. Sold each.
Part No. Description SB/BB Chevy Economy
ALL34230 3" Collector Pattern (3-7/8" B.C.)
ALL34231 2-1/2" Collector Pattern (3-1/2" B.C.)
Engine Cradle
ALL10171
IMPORTANT! ALL34232 or ALL34233 Cradle is great for storing or
harness (sold separately) is required for transporting engines safely.
proper operation. Designed to fit small and big
Related Parts block Chevrolet engines, cradle
Part No. Description
ALL34233 is fully welded from 1" square tubing and powder coated
ALL34232 Single System Harness black. Cradle has provisions for mounting our standard
ALL34233 Dual System Harness duty wheel kits with 3/8" wheel studs.

O2 Sensor Plug and Bung SB Chevy 2-Piece

Hard-to-find O2 sensor fittings Engine Stand
work in a variety of uses.
ALL10157
Part No. Description
ALL34150 18mm Sensor Plug
ALL34150 ALL34152 Two-piece engine stand
ALL34152 18mm Sensor Bung, Angled constructed from 1" x 2"
ALL34153 18mm Sensor Bung, Straight steel tubing is specially designed to
ALL34153 clear most oversized dry sump oil pans
with up to a 9" deep sump. Stand includes six 3/8" x 1"
Swivel Exhaust Hanger grade 5 bolts and accepts wheel kits with 3/8" studs.
ALL34220 Engine Lift Plate
Hanger swivels horizontally and vertically to simplify
mounting in any position. Bolt or weld to chassis to ALL10123
support additional weight of mufflers, turndowns, Ease engine swaps with the Allstar
etc. Steel strapping is 1/8" thick. engine lift plate. Bolts to manifold in
place of carburetor. Yellow zinc-coated
plate fits standard Holley 4150/4160 and 4500
Dominator, Rochester Quadrajet, Carter, Motorcraft,
Edelbrock, Edelbrock Q-Jet, and Carter AFB carburetors.

60 2023 - 2024 HOT ROD AND EARLY MUSCLE

Engine Cradles LS Motor Mount Adapters
Engine cradles are available Accepts ALL38084
in standard-duty or heavy- Bolt-On
Adapters allow bolting an early
duty, both with provisions Wheel Kits
GM 3-bolt motor mount to the
for mounting wheels and are late model LS-style block with
made of 1" square tubing with a 4-bolt pattern. Adapters
black powder coating. place the early mount in
All cradles are for V8 ALL10130 approximately the same location as found on the original
engines, include Grade 5 fasteners SB/BB Chevy engines and also features optional holes
and may be easily disassembled for for moving the engine forward up to 2-1/4" for additional
storage. Standard-duty cradles accept wheel kits with firewall clearance. Sold in pairs and includes mounting
3/8" studs. Heavy-duty cradles accept wheel kits with hardware.
1/2" studs. Wheel kits sold separately.
Standard-Duty Cradles
Part No. Description
Chevy Solid Motor Mount
ALL10130 SB and BB Chevy ALL38080
ALL10138 GM LS Series Solid motor mount is 1/4"
ALL10145 SB Ford † thick steel and replaces
ALL10147 SB Ford Modular/Coyote
stock Chevy rubber mount
ALL10150 SB Mopar
ALL10151 Hemi (5.7 and 6.1)
to eliminate torque loss and
prevent engine movement.
Standard-Duty Wheel Mount Sold each.
Heavy-Duty Cradle
Part No. Description
ALL10132 SB and BB Chevy Chevy Motor Mount Pads
ALL10139 GM LS Series
ALL10142 Oldsmobile
ALL38090
ALL10144 Pontiac Steel pads are 1/4" thick and
ALL10148 SB Ford † traditionally used as shims to gain
ALL10149 SB Ford Modular/Coyote Heavy-Duty Wheel Mount extra oil pan or header clearance. May
ALL10152 SB Mopar † Designed to work with stock also be used for building custom motor
ALL10154 BB Ford and most aftermarket blocks mounts or engine stands. Sold in pairs.
ALL10156 BB Mopar including Dart, World, and Ford
Boss with ribbed engine mount
bosses and bulged water jackets. GM Motor Mount
ALL38114
Caster Wheel Kits Replacement stock mount for most GM
Caster wheel kits may be mounted engines. Mount bolts to chassis.
to most Allstar engine cradles or Fits:
used when building projects around 1970-88 Monte Carlo 1973-87 Cutlass
the shop. Kits include four caster 1970-87 El Camino 1974-83 Malibu
wheels, locking wheel kits include 1971-92 Camaro 1970-79 Nova
two locking casters. 1977-87 Regal 1970-85 Impala
Standard Duty Caster 1970-73 Chevelle
Casters are rated at 125 lbs. per
wheel and feature a 3/8"-16 x 1-1/4" Ford Motor Mount
mounting stud.
ALL38116
Part No. Description
Replacement rubber mount for Allstar
ALL10162 3" Wheel Kit
ALL10163 3" Wheel Kit—Locking
Ford Ranger V8 conversion kit. Mount
bolts to the engine.
Heavy Duty Caster
Casters are rated at 300lbs per wheel and feature a 1/2"-
13 x 1" mounting stud.
Part No. Description
ALL10164 3" Wheel Kit
ALL10165 3" Wheel Kit—Locking
ALL10166 5" Wheel Kit

SB/BB Chevy Engine Cradle

ALL10172
A quality cradle for small block
and big block Chevrolet engines.
Casters included.

2023 - 2024 HOT ROD AND EARLY MUSCLE 61

Nylon Tie Wraps Tie Wrap Tool
Secure electrical wiring, ALL11005
gauge lines, and roll bar Tired of cuts from nylon tie wraps that
padding. Available in black, have been trimmed with standard wire
natural, red, blue, yellow, and cutters? This tool does a great job of drawing nylon ties
purple nylon. Package of 100. tight around bundles of wires or cables in tight areas
Black Red and easily cuts flush with a twist of the wrist. ABS
constructed tool has steel cutting blades and works
Part No. Description Part No. Description with common size nylon wire ties.
ALL14120 3-3/4" ALL14126 7-1/4"
ALL14122 6" ALL14127 14-1/4"
ALL14123 7-1/4" Stainless Steel Tie Wraps
Blue
ALL14124 11-1/4" Stainless steel ties are an excellent choice when
ALL14125 14-1/4" Part No. Description securing header wrap to exhaust tubes or similar
ALL14128 7-1/4" applications when nylon wraps won’t stand up
Natural ALL14129 14-1/4"
to the heat! Rust and corrosion-resistant cable
Part No. Description ties are T-304 stainless.
Yellow
ALL14130 3-3/4"
ALL14132 6" Part No. Description Part No. Description
ALL14133 7-1/4" ALL14136 7-1/4" ALL34262 7-1/2" Long, Package of 8
ALL14134 11-1/4" ALL14137 14-1/4" ALL34264 14-1/2" Long, Package of 4
ALL14135 14-1/4"
Purple
Tie Wrap Mounting Bases
Part No. Description Self-adhesive mounting bases provide a
ALL14138 7-1/4"
location for attaching standard tie wraps to
ALL14139 14-1/4"
secure wiring, cables and hoses. Bases mount to clean,
Heavy-Duty Nylon Tie Wraps flat surfaces and accept 75# and smaller wire ties.
Package of 10.
Heavy-duty black nylon ties are ideal for
emergency repairs and applications that Part No. Description
ALL14116 3/4" x 3/4" Mounting Base
require a secure attachment.
ALL14117 1-1/8" x 1-1/8" Mounting Base
Part No. Description
ALL14380 8", 25-Pack
ALL14381 14", 25-Pack Safety Wire
ALL14383 21", 10-Pack Wire is used to mechanically lock pre-drilled
ALL14385 36", 10-Pack fasteners for added security. Type 302/304
stainless steel wire features high corrosion
Nylon Flush-Fit Tie Wraps resistance and good tensile strength in
Flush fit design ties have the excess applications up to 500°F. Sold in a 1-lb.
portion of the tie exit in the same spool enclosed in a convenient dispensing
direction as the original tie, helping container.
to eliminate the protruding sharp Part No. Description
portion remaining as found in ALL10121 .032" Diameter
standard ties. Package of 100. ALL11008 .041" Diameter

Part No. Description

ALL14395 8" Long Safety Wire Drill Fixture
ALL14396 11" Long ALL10122
Accurately drill holes in
fasteners, allowing them to
Nylon Tie Wraps with Mounting be mechanically locked in
place with safety wire. Fixture
Holes accommodates most 3/16", 1/4",
Built-in tab with mounting hole to 5/16", 3/8", 7/16", 1/2", and 5/8" socket-head and hex-head
easily secure wiring harnesses, hoses, fasteners. Guide bolt tightens against fastener, holding it
or cables to a panel with rivets or other securely for drilling. Fixture includes two guide bolts and
fasteners. Package of 25. two 1/16" drill bits conveniently stored within the fixture.
Part No. Description Replacement Part
ALL14390 8" with #10 Hole
Part No. Description
ALL14391 11" with #10 Hole
ALL99102 Replacement Drill Bits, 2-Pack
ALL14392 14" with 1/4" Hole

Safety Wire Twister Pliers

ALL10120
Never lose another race because of loose
bolts. Rugged pliers have an end bearing for
smoother, faster twisting, especially in tight areas where
a second pull is needed.

62 2023 - 2024 HOT ROD AND EARLY MUSCLE

Quick-Turn Starter Kit Aluminum Washer Countersunk
ALL19410 Bolt Kits
Not sure where to start Kit includes specially designed aluminum
washers which allow the ALL18630
when using quick-
turn socket-head fasteners to
fasteners? install flush with the surface,
Use this creating a smooth, finished
kit as a look. Many uses include ALL18633
starting point mounting roofs, side skirts, spoilers, and replacing
to determine sharp-edged fasteners inside cockpit. Kits include
correct fasteners washers, bolts and nyloc nuts.
for application. Kit includes Bolt Size Washer O.D. Finish 10-Pack 50-Pack
two different lengths of Countersunk Bolt Kits
Allstar’s most popular oval head #10-24 x 1" 1" Clear ALL18630 ALL18630-50
7/16" fasteners (five ALL19280 and five #10-24 x 1" 1" Black ALL18631 ALL18631-50
ALL19286), ten ALL19330 springs, and twenty-five multi- 1/4"-20 x 1" 3/4" Clear ALL18628 ALL18628-50
grip rivets. 1/4"-20 x 1" 3/4" Black ALL18629 ALL18629-50
1/4"-20 x 1" 1" Clear ALL18632 ALL18632-50
1/4"-20 x 1" 1" Black ALL18633 ALL18633-50
Threaded Insert Tool Kit 1/4"-20 x 1" 1-1/4" Clear ALL18634 ALL18634-50
ALL19450 1/4"-20 x 1" 1-1/4" Black ALL18635 ALL18635-50

Tool works with a cordless

drill to install a Aluminum Washers
threaded insert into Washer I.D. x O.D. Finish 10-Pack 50-Pack
a panel or bracket. Countersunk Aluminum Washers
Inserts are helpful #10 x 1" Clear ALL18660 ALL18660-50
when the backside of the panel is not easily accessible. #10 x 1" Black ALL18661 ALL18661-50
1/4" x 3/4" Clear ALL18658 ALL18658-50
Simply drill the correct size hole, install the threaded
1/4" x 3/4" Black ALL18659 ALL18659-50
insert onto the mandrel, then place the insert into the 1/4" x 1" Clear ALL18662 ALL18662-50
hole and tighten using any cordless drill. Once the insert 1/4" x 1" Black ALL18663 ALL18663-50
is compressed, reverse the drill and remove the mandrel 1/4" x 1-1/4" Clear ALL18664 ALL18664-50
from the insert. Kit includes mandrel and nosepiece for 1/4" x 1-1/4" Black ALL18665 ALL18665-50
1/4"-20, 5/16"-18, and 3/8"-16 inserts, other sizes available Flat Aluminum Backer Washers
separately. Threaded inserts sold separately. #10 x 1" Clear ALL18638 –
Replacement Parts 1/4" x 1" Clear ALL18639 –
Part No. Description
ALL19452 Mandrel and Nosepiece for 8-32
ALL19453 Mandrel and Nosepiece for 10-24
ALL19454 Mandrel and Nosepiece for 10-32
ALL19455 Mandrel and Nosepiece for 1/4"-20 ALL18660 ALL18638
ALL19456 Mandrel and Nosepiece for 5/16"-18
ALL19457 Mandrel and Nosepiece for 3/8"-16 ALL19454
Body Bolt Kit with Clips
Kit allows the clip to stay fastened
Threaded Inserts to body panel or angle bracing when
Steel inserts are helpful when the removing body panels for maintenance
backside of the panel is not easily or cleaning. 1/4"-20 thread bolts are ALL18558
accessible. Inserts work great 1-1/8" UHL and have a built-in captured
for frequently removed items washer.
including gauge panels, switch panels,
Bolt Color 10-Pack 50-Pack
access panels, and body panels, or when
Black ALL18558 ALL18558-50 ALL18656
mounting items to trailer walls. Inserts are Clear ALL18656 ALL18656-50
designed for installation using insert tool Gold ALL18559 ALL18559-50
ALL19450 with coordinating mandrel and
nosepiece. Package of 10. ALL18559
Pilot Hole Body Length
Part No. Thread Size Size Grip Range (Before Comp.) Body Bolt Clips
ALL19460 8-32 17/64" Up to .080" .420" Steel clips have built-in 1/4"-20 threads making them
ALL19461 10-24 5/16" Up To .130" .475" ideal for often removed panels or when the backside is
ALL19462 10-32 5/16" Up to .130" .475" not easily accessible. Clips feature a friction tab to hold
ALL19463 1/4"-20 13/32" Up to .165" .580"
clips firmly in place on panels up to 3/16" thick. Dimension
ALL19465 5/16"-18 17/32" Up to .150" .690"
ALL19467 3/8"-16 17/32" Up to .150" .690"
listed is center of hole to edge of clip (depth).
Depth 10-Pack 50-Pack
1/2" ALL18554 ALL18554-50
3/4" ALL18564 ALL18564-50

2023 - 2024 HOT ROD AND EARLY MUSCLE 63

Hex-Head Bolts – Coarse Thread Grade 5

Length 1/4"–20 5/16"–18 3/8"–16 7/16"–14 1/2"–13 5/8"–11 3/4"–10

3/4" ALL16201 ALL16221 ALL16241 – ALL16281 – –
1" ALL16202 ALL16222 ALL16242 ALL16262 ALL16282 – –
1–1/4" ALL16203 ALL16223 ALL16243 ALL16263 ALL16283 – –
1–1/2" ALL16204 ALL16224 ALL16244 ALL16264 ALL16284 – –
1–3/4" ALL16205 ALL16225 ALL16245 ALL16265 ALL16285 – –
2" ALL16206 ALL16226 ALL16246 ALL16266 ALL16286 ALL16316 ALL16336
2–1/4" – – – – ALL16287 – –
2–1/2" ALL16208 ALL16228 ALL16248 ALL16268 ALL16288 ALL16318 ALL16338
2–3/4" – – – – ALL16289 – –
3" ALL16210 – ALL16250 ALL16270 ALL16290 ALL16320 ALL16340
3–1/2" ALL16211 – – ALL16271 ALL16291 ALL16321 –
4" ALL16212 – ALL16252 ALL16272 ALL16292 ALL16322 ALL16342
4–1/2" ALL16213 – – ALL16273 ALL16293 – –
5" ALL16214 – ALL16254 – ALL16294 ALL16324 ALL16344
6" – – ALL16256 – ALL16296 – ALL16346
6–1/2" – – – – – – ALL16347
7" – – ALL16258 – ALL16298 – ALL16348
7–1/2" – – – – – – ALL16349
8" – – – – – – ALL16350

Hex-Head Bolts – Fine Thread Grade 5

1/4"–28 5/16"–24 3/8"–24 7/16"–20 1/2"–20 5/8"–18 3/4"–16

Length Part No. Part No. Part No. Part No. Part No. Part No. Part No.
1" ALL16402 ALL16422 ALL16442 ALL16462 ALL16482 – –
1–1/2" ALL16404 ALL16424 – ALL16464 ALL16484 – –
2" ALL16406 ALL16426 ALL16446 ALL16466 ALL16486 – ALL16536
2–1/2" – – – ALL16468 ALL16488 ALL16518 ALL16538
3" – – – ALL16470 ALL16490 ALL16520 ALL16540
3–1/2" – – – – – – ALL16541
4" – – – ALL16472 ALL16492 ALL16522 ALL16542
5" – – – ALL16474 ALL16494 – ALL16544
6" – – – ALL16476 – – ALL16546

Hex Nuts and Washers Nut Nylon Insert Thin Nylon Insert Mechanical Flange Nut
Lock Nut

Coarse Thread 1/4"–20 5/16"–18 3/8"–16 7/16"–14 1/2"–13 5/8"–11 3/4"–10

Nut, 10-Pack ALL16000-10 ALL16001-10 ALL16002-10 ALL16003-10 ALL16004-10 ALL16005-10 ALL16006-10
Nut, 50-Pack ALL16000-50 ALL16001-50 ALL16002-50 ALL16003-50 ALL16004-50 – –
Nylon Insert, 10-Pack ALL16010-10 ALL16011-10 ALL16012-10 ALL16013-10 ALL16014-10 ALL16015-10 ALL16016-10
Nylon Insert, 50-Pack ALL16010-50 ALL16011-50 ALL16012-50 ALL16013-50 ALL16014-50 – –
Thin Nylon Insert, 10-Pack ALL16020-10 ALL16021-10 ALL16022-10 ALL16023-10 ALL16024-10 ALL16025-10 ALL16026-10
Mech. Lock Nut, 10-Pack ALL16030-10 ALL16031-10 ALL16032-10 ALL16033-10 ALL16034-10 ALL16035-10 ALL16036-10
Flange Nut, 10-Pack ALL18557 ALL16041-10 ALL16042-10 ALL16043-10 ALL16044-10 ALL16045-10 –

Fine Thread 1/4"–28 5/16"–24 3/8"–24 7/16"–20 1/2"–20 5/8"–18 3/4"–16

Nut, 10-Pack ALL16050-10 ALL16051-10 ALL16052-10 ALL16053-10 ALL16054-10 ALL16055-10 ALL16056-10
Nylon Insert, 10-Pack ALL16060-10 ALL16061-10 ALL16062-10 ALL16063-10 ALL16064-10 ALL16065-10 ALL16066-10
Thin Nylon Insert, 10-Pack ALL16070-10 ALL16071-10 ALL16072-10 ALL16073-10 ALL16074-10 ALL16075-10 ALL16076-10
Mech. Lock Nut, 10-Pack ALL16080-10 ALL16081-10 ALL16082-10 ALL16083-10 ALL16084-10 ALL16085-10 ALL16086-10

Washers 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"

USS Flat*, 25-Pack ALL16100-25 ALL16101-25 ALL16102-25 ALL16103-25 ALL16104-25 – –
SAE Flat*, 25-Pack ALL16110-25 ALL16111-25 ALL16112-25 ALL16113-25 ALL16114-25 ALL16115-25 ALL16116-25
Lock, 25-Pack ALL16120-25 ALL16121-25 ALL16122-25 ALL16123-25 ALL16124-25 ALL16125-25 ALL16126-25
Lock for SHCS, 25-Pack ALL16130-25 ALL16131-25 ALL16132-25 ALL16133-25 – – –
AN, 25-Pack ALL16150-25 ALL16151-25 ALL16152-25 ALL16153-25 ALL16154-25 – –
*USS washers have a larger O.D. than SAE washers

64 2023 - 2024 HOT ROD AND EARLY MUSCLE

Tapered Spacers 1/2" Steel Hood Pin Kits ALL18512
Universal spacers have many uses Kits include two each: 4" long x 1/2"
including spacing rod ends on linkages diameter chrome steel pins, chrome
to prevent binding or just to provide steel scuff plates, clips, and four
clearance. Spacers provide a finished look nuts. Available with flip-over or
when fitting body panels or spacing components hairpin-style clips.
away from floors and firewalls. Package of 2. Part No. Description
Large ALL18512 Kit with 3/16" Dia. Flip-Over Clips
I.D. Small O.D. O.D. Length Steel Aluminum ALL18513 Kit with 1/4" Dia. Flip-Over Clips
1/4" – ALL18700 ALL18514 Kit with 5/32" Dia. Hairpin Clips
1/4" .345 .500
1/2" – ALL18702
1/4" – ALL18706
5/16" .475 .625
1/2" – ALL18708 1/2" Aluminum Hood Pin Kits
1/4" – ALL18712 Kits include two each: 4" x 1/2" diameter
3/8" .525 .680 1/2" – ALL18714 aluminum pins, aluminum scuff
1" – ALL18716 plates, 1/4" diameter flip-over steel
1/4" ALL18570 ALL18590 clips, and four nuts. Clip flips over
3/8" ALL18571 – pin and over-center action locks clip in
1/2" ALL18572 ALL18592 place.
1/2" .740 .995
3/4" ALL18574 ALL18594
1" ALL18576 ALL18596 Color Complete Kit Pins Only, 1-Pair
Silver (Plain) ALL18500 ALL18507
1-1/2" ALL18578 ALL18595
Red Anodized ALL18501 ALL18508
1/4" ALL18580 ALL18597
Blue Anodized ALL18502 ALL18509
1/2" ALL18582 ALL18598
Gold Anodized ALL18503 ALL18510
5/8" .825 .995 3/4" ALL18584 ALL18599
Black Anodized ALL18504 ALL18511
1" ALL18586 –
1-1/2" ALL18585 –
1/2" ALL18587 – Line Clamps
3/4" .950 1.125 3/4" ALL18588 – Aluminum clamps have a
1" ALL18589 – protective neoprene cushion
to prevent abrasion and a 1/4"
Hourglass Spacers mounting hole to secure electrical wiring, hoses, or
cables to a panel or frame.
Black nylon clamps have a 3/16" mounting hole to secure
electrical wiring, hoses, or cables to a panel or frame.
Tired of simple spacers on your cool ride, these spacers Aluminum Nylon
look nice while also offering additional support on Clamp Size 10-Pack 50-Pack 10-Pack 50-Pack
1/8" – – ALL18309 ALL18309-50
both ends. Package of 2.
3/16" ALL18300 ALL18300-50 ALL18310 ALL18310-50
1/4" I.D. 5/16" I.D. 3/8" I.D. 1/2" I.D. 1-1/2" 1/4" ALL18301 ALL18301-50 ALL18311 ALL18311-50
Length 1" O.D. 1" O.D. 1" O.D. O.D.
3/8" ALL18302 ALL18302-50 ALL18312 ALL18312-50
1/4" ALL18800 ALL18810 ALL18820 ALL18830
1/2" ALL18303 ALL18303-50 ALL18313 ALL18313-50
1/2" ALL18802 ALL18812 ALL18822 ALL18832
5/8" ALL18304 ALL18304-50 ALL18314 ALL18314-50
1" ALL18804 ALL18814 ALL18824 ALL18834
3/4" ALL18305 ALL18305-50 ALL18315 ALL18315-50
1-1/2" ALL18806 ALL18816 ALL18826 ALL18836
7/8" ALL18306 ALL18306-50 – –
2" ALL18808 ALL18818 ALL18828 ALL18838
1" ALL18307 ALL18307-50 ALL18317 ALL18317-50
1-1/4" ALL18308 ALL18308-50 – –
Aluminum Flat Spacers
Flat spacers are great for shimming and Hose Clamps
adding additional clearance to brackets for Heavy-duty all stainless steel
brake calipers, power steering, alternators, dry sump construction clamps are easily
pumps, or just about anything to help with alignment tightened with a deep-slot hex-head
issues. Package of 2. screw. Superior to standard hardware store
Length 3/8" I.D. (11/16" O.D.) 1/2" I.D. (1" O.D.) clamps.
1/8" ALL18740 ALL18760
1/4" ALL18742 ALL18762 Part No. Min O.D. Max O.D.
2-Pack
3/8" ALL18744 ALL18764
ALL18330 1/4" 5/8"
1/2" ALL18746 ALL18766
ALL18332 1/2" 1-1/8"
ALL18334 1" 2"
Universal Line Clamps ALL18336 1-5/16" 2-1/4"
Two-piece aluminum clamps dress up ALL18338 1-9/16" 2-1/2"
wiring or hard lines. Package of 4. ALL18340 1-5/8" 3-1/2"
ALL18342 2-5/8" 4-1/2"
Part No. Description
ALL18320 3/16" 10-Pack
ALL18321 1/4 ALL18330-10 1/4" 5/8"
ALL18322 5/16" ALL18332-10 1/2" 1-1/8"
ALL18323 3/8" ALL18334-10 1" 2"
ALL18336-10 1-5/16" 2-1/4"
ALL18338-10 1-9/16" 2-1/2"

2023 - 2024 HOT ROD AND EARLY MUSCLE 65

T-Bolt Band Clamps Billet Fuel Pump
Stainless steel constructed band Block-Off Plates
clamps provide a better sealing CNC-machined billet aluminum
option over traditional hose clamps plates cover the mechanical pump
in performance applications. Clamps opening in the engine block and include a ALL40306
feature a 3/4" wide band and are sold in pairs. gasket and stainless steel fasteners.
Part No. Min O.D. Max O.D. Description Blue Clear Red Black
ALL18344 1-1/2” 1-3/4” SB Chevy ALL40300 ALL40301 ALL40302 ALL40306
ALL18345 1-3/4” 2” BB Chevy, SB/BB Ford†,
ALL18347 2” 2-3/8” ALL40303 ALL40304 ALL40305 ALL40307
SB/BB Chrysler
ALL18349 2-1/4” 2-5/8”
†Will not fit Ford 351C, 351M-400.
ALL18350 2-3/8” 2-3/4”
ALL18351 2-3/4” 3-1/4”
ALL18352 3” 3-3/8” Fuel Pressure Regulator
ALL18353 3-1/4” 3-5/8”
ALL18354 3-3/4” 4-1/4” ALL40290
ALL18355 4-1/4” 4-5/8” Place regulator between fuel pump and
carburetor to regulate fuel pressure when
Performance Mechanical Fuel Pumps using mechanical and electric performance
Lightweight die-cast three valve pump is great fuel pumps. Two-piece aluminum body has a
for use with Sportsman type engines up single 3/8"NPT inlet port on the bottom and two 3/8"NPT
to 700HP and 8,000 RPM. Pump features side outlet ports. “Dead Head” style regulator does not
AN-style inlet and outlet fittings for easy require a return line back to fuel tank or cell. 1/8"NPT
plumbing. Lower section is clockable every port for mounting a fuel pressure gauge or sender
30° to fit most applications. Pump is line. Regulator also includes steel mounting bracket.
rated at 45 GPH @ 7–8.5 PSI and does Regulator is gasoline, ethanol, and E85 compatible. Use
not require an external fuel pressure regulator. with 4.5 to 14 PSI systems. Not methanol compatible.
Part No. Description Replacement Part
ALL40266 -8AN Inlet / -8AN Outlet
Part No. Description
ALL40267 -10AN Inlet / -8AN Outlet ALL99430 Rebuild Kit

Replacement Fittings
Shockproof Pressure Gauges
Part No. Description
ALL50915 -8AN Fitting
1-1/2" diameter gauges are constructed
ALL50916 -10AN Fitting using reliable brass internal parts and have
a 1/8"NPT male fitting on the backside of
Sportsman 2-Valve Fuel Pumps the gauge. Dry gauges feature a chrome-
plated steel housing, while glycerin-filled ALL80200
Pumps with aluminum housings have
gauges help dampen the effect of pulsation and pressure
1/4"NPT inlet/outlet fittings, heavy-duty
spikes of the gauge needle and feature a stainless steel
diaphragms, anti-float springs, and
housing.
“clockable” lower base for rotation of
inlet and outlet. Pumps deliver 6-1/2 to 8 Description Glycerin-Filled Dry Type Engine Turned
0-15 PSI ALL80200 ALL80210 ALL80220
PSI with 80 GPH free flow.
0-30 PSI ALL80202 – ALL80222
Part No. Description 0-60 PSI ALL80204 ALL80214 ALL80224
ALL40260 SB Chevy 0-100 PSI ALL80206 ALL80216 ALL80226
ALL40261 BB Chevy 0-1,500 PSI ALL80208 (NOS) ALL80218 –
ALL40262 SB Ford

Hi-Flow Chrome Fuel Filter

SB Chevy Fuel Pump Mount Plate
ALL40250
ALL40254 Canister-type filter has 3/8"NPT
OE-style plate replaces lost or missing inlet and outlet, a replaceable
mounting plate required to mount mechanical 10-micron element, and 90 GPH
style fuel pump to most small block Chevrolet flow.
engines. Clear zinc-plated finish may also Replacement Part
be painted to match original appearance.
Part No. Description
Mounting hardware included. ALL40251 Replacement Element and Seals

SB Chevy Fuel Pump Block-Off Plate

ALL40255
Plate covers mechanical fuel pump engine
opening on most small block Chevrolet
engines when omitting a mechanical-style
fuel pump. Plate is often used when
converting to electric or belt-driven fuel
pumps. Clear zinc-plated finish may also be painted.

66 2023 - 2024 HOT ROD AND EARLY MUSCLE

In-line Aluminum Fuel Filters Fuel Line
Black anodized, high-flow Premium fuel line is reinforced to
in-line filters are available help prevent kinking and is rated up
with no element or with a to 50 PSI for use with carbureted
stainless or paper element. Choose correct bracket and applications. Fuel line is compatible
mount to chassis tubing along fuel line. Filter elements with gasoline, E-85, diesel, and
are 8" long and fit in a 9" housing. Overall length is 12" and biodiesel and has many other uses including connecting
outside diameter is 2". Filter flows enough fuel for any PCV valves, coolant overflow tanks, and vent lines for
race car. Stainless elements are compatible with E-85 transmissions and differentials. Line size indicated is I.D.
and methanol fuels. of hose.
Black Anodized Fuel Filters
With Paper With Stainless Without Note: Line is not for use with fuel injection and is not submersible.
Fitting Size Element Element Element
-6AN Ends ALL40238 ALL40239* ALL40243 Part No. Description
ALL40350 Paper Element (10 Micron)
-8AN Ends ALL40216 ALL40218* ALL40244
ALL40351 Stainless Element (63 Micron)
-10AN Ends ALL40217 ALL40219* ALL40245
ALL40353 -6AN End Cap
-12AN Ends ALL40240 ALL40242* ALL40246
ALL40354 -8AN End Cap
ALL40356 -10AN End Cap
Replacement Parts
ALL40357 -12AN End Cap
Part No. Description
ALL40220 Paper Element (10 Micron)
ALL40222* Stainless Element (63 Micron) Vacuum Line
ALL40223 -6AN End Cap Premium vacuum line resists kinking
ALL40224 -8AN End Cap and is pliable for easy routing. Often
ALL40226 -10AN End Cap used when connecting sensors,
ALL40225 -12AN End Cap vacuum advance units, windshield
ALL40236 Spring washers, or replacing existing
ALL40237 O-Ring 2-Pack cracked, leaking vacuum lines. Size
Outlet
indicated is I.D. of hose.
*Compatible with E-85 fuels
Part No. Description
ALL40340 5/32", 5' Long
ALL40341 5/32", 50' Long
Inlet
Filter Fact: ALL40342 7/32", 5' Long
ALL40343 7/32", 50' Long
Filter element must be installed with the closed end and
the spring toward the INLET end of housing. The open
end faces the OUTLET. Coiled Tubing
Coiled tubing works great for building
1-piece custom fuel lines without
Fuel Filter Brackets unions. Stainless steel tubing is 304
Brackets mount Allstar in-line aluminum grade and double annealed for easy
fuel filters to round or square tubing and flat flaring and bending. Tubing does not
surfaces. Flush-mount bracket fastens to flat include flare nuts (sold separately).
panels like a frame rail or firewall. A locking set ALL40235 Part No. Description
screw holds filter in place. Brackets for round
ALL48327 5/16" Standard Zinc, 25'
and square tubing clamp with caps secured by ALL48328 3/8" Standard Zinc, 25'
Allen head screws. Sold each. ALL48322 3/8" Stainless, 20'
Part No. Tubing Size Tubing Shape
ALL40229
ALL40227
1-1/4"
1-3/8"
Round
Round
Inverted Flare Nuts
ALL40228 1-1/2" Round
Flare nuts are used for building custom
ALL40230 1-3/4" Round length lines.
ALL40232 Zinc
ALL40232 2" x 2" Square Part No. Size Material Qty.
ALL40235 Flush Mount – Flare Nuts for 5/16" Fuel Line
ALL50140 1/2"-20 Zinc-Plated 10-Pack
Aluminum Fuel Line ALL50141 1/2"-20 Stainless 4-Pack
Stainless
Flare Nuts for 3/8" Fuel Line
Aluminum fuel line is seamless and ALL50142 5/8"-18 Zinc-Plated 10-Pack
Steel
available in three diameters. 25' coil. ALL50143 5/8"-18 Stainless 4Pack
Part No. Description
ALL40180 3/8" O.D.
ALL40185 1/2" O.D.
ALL40186 5/8" O.D.

2023 - 2024 HOT ROD AND EARLY MUSCLE 67

Heat Sleeve Aluminum Carb Fittings
High-temperature silicone-coated Convert Holley carburetors with 7/8"-20 threads,
fiberglass sleeving is non-flammable Holley Ultra HP with 3/4"-16 ORB threads, or BG/Demon
and resists temperatures up to 500°F. ALL34284 style with 9/16"-24 threads to an AN-style connection.
An excellent choice for protection of Anodized aluminum fittings simplify plumbing fuel
fuel lines, wiring, cables and various similar systems and building custom fuel lines. Fittings sold
uses. Sleeving is resistant to gasoline and many other each.
chemicals. Sold in 3' lengths. Size referenced is sleeve
I.D. or O.D. of hose to be covered.
Color 1/4" 1/2" 3/4" 7/8" 1"
Orange ALL34280 ALL34282 ALL34284 ALL34285 ALL34286 ALL50890
Black ALL34290 ALL34292 ALL34294 ALL34295 ALL34296 ALL50892 ALL50900 ALL50902 ALL50901

Adjustable Fuel Logs

Adjustable fuel logs
feature over 4" of
ALL50896 ALL50904 ALL50906 ALL50905
adjustment to work
with a variety of dual
inlet carburetors. Black Fittings With: Blue Black
anodized aluminum log ALL26150
Female -6AN End Holley
ALL50890 ALL50892
has a -8AN fuel inlet and a 3/8"NPT plug in rear (7/8"-20)
Male -6AN End Holley
port that can be removed to install a return line or fuel (7/8"-20) Short
ALL50894 ALL50896
pressure regulator. Female -8AN End Holley
ALL50900 ALL50902
Part No. Description (7/8"-20)
ALL26150 Fuel Log with 7/8"-20 Fitting (Standard Holley) Female -8AN End Holley HP
– ALL50907
ALL26151 Fuel Log with 3/4"-16 ORB Fitting (Holley Ultra HP) (3/4"-16 ORB)
Female -8AN End BG/Demon
ALL50901 –
(9/16"-24)
Male -8AN End Holley
Fuel Logs (7/8"-20) Short
ALL50904 ALL50906
Fuel logs efficiently Male -8AN End Holley
ALL50905 –
provide fuel to most (7/8"-20)
4150 series Holley
style carburetors with Replacement Part
7/8"-20 inlet threads Part No. Description
and standard metering ALL26153 ALL50910 Sealing Washer for 7/8" Fittings, 10-Pack
blocks. Choose log with a -8AN male inlet fitting or -8
barbed inlet fitting for use with push lock hose. Logs have
1/2"NPT and 1/8"NPT plugs that can be removed to install
a return line or fuel pressure gauge.
Fuel Line Kits
Dual-feed fuel
Part No. Description ALL26156
line kits include
ALL26152 Fuel Log with -8 Barbed Inlet Fitting
ALL26153 Fuel Log with -8AN Male Inlet Fitting
the correct
fittings and ALL26166
hoses to properly
plumb single carburetor applications when connecting
GM T.P.I. Fuel Injection Fittings to AN-style fittings. Line kits also include a capped -4AN
Special tube O-ring fittings convert GM fitting which can be easily connected to a fuel pressure
Tuned Port Injection fuel systems to gauge. Kits are offered with -6AN or -8AN lines and
-6AN fittings. fittings.
Part No. Description Carb
ALL50950 TPI Return Fitting, 14mm-1.50 Application C To C Red/Blue Black
Thread
ALL50951 TPI Inlet Fitting, 16mm-1.50 -6 Holley (4150 Series) 9-5/16" 7/8"-20 ALL26154 ALL26164
-8 Holley (4150 Series) 9-5/16" 7/8"-20 ALL26156 ALL26166
-8 Holley (4150 Series)* 9-5/8" 7/8"-20 ALL26159 ALL26169
-8 Holley Ultra HP (4150 Series) 9-5/8" 3/4"-16 – ALL26165
-8 Holley Dominator (4500 Series) 11-5/8" 7/8"-20 ALL26158 ALL26168
-8 BG Demon 9-5/8" 9/16"-24 ALL26157 ALL26167
*Designed for carburetors with custom metering block including Willy’s and KB.

68 2023 - 2024 HOT ROD AND EARLY MUSCLE

Throttle Return Spring Brackets Aluminum Carb Linkage
Billet aluminum bracket can be with Return Spring Kit
used with cable or mechanical
linkage. Bracket fastens to ALL54158
carb mounting studs and ALL54201 Linkage kit
includes dual stainless includes
steel return springs which a 24"
are adjustable for tension. A specially designed return linkage with 1/4" rod ends for smooth operation and a
spring arm attaches to the carb for simplified installation return spring kit for 2300 2bbl/4150 4bbl Holley style
and smooth operation. Low-profile design clears most air carburetors. Return spring kit includes correct stepped
cleaner assemblies. bushings, mounting hardware, and heavy and light rate
return springs. Throttle rod is easily formed to fit many
Carb Size Clear Black
4150/Edelbrock ALL54200 ALL54202
applications and may be shortened and rethreaded using
4500 ALL54201 ALL54203 a 1/4"-28 tap.
Note: Longer carburetor studs will be required to accommodate bracket. Replacement Parts
Part No. Description
Adjustable Throttle Brackets ALL54159
ALL54168
Carb Linkage Only
Return Spring Kit
with Return Springs
Billet aluminum throttle
bracket securely mounts ALL54211
Carb Mount
and holds throttle cable
in place. Bracket fastens Return Spring Kit
to carb mounting studs ALL54168
and includes dual stainless steel return springs which Kit includes chrome-plated
are adjustable for tension. Specially designed return steel bracket, springs,
spring arm attaches to the carb for simple installation bushings and hardware to
and smooth operation. Low-profile design clears most fit a variety of applications.
air cleaner assemblies. Optional transmission kickdown Universal.
brackets mount to the underside of throttle cable
brackets.
Carb Size Cable Style Clear Black
Return Spring Bracket
4150/Edelbrock GM ALL54210 ALL54211 ALL54167
4150/Edelbrock Lokar ALL54214 ALL54215 Chrome plated steel bracket provides
4150/Edelbrock Morse ALL54218 ALL54219 mounting location for return spring.
4150/Edelbrock Ford ALL54222 ALL54223
4150/Edelbrock Mopar ALL54224 ALL54225
4500 GM ALL54226 ALL54227
4500 Lokar ALL54230 ALL54231
4500 Morse ALL54234 ALL54235 Universal Return Spring Kit
4500 Ford ALL54238 ALL54239
4500 Mopar ALL54240 ALL54241 ALL54166
Note: Longer carburetor studs will be required to accommodate bracket. Kit includes two springs and mounting
bracket.

Transmission Kickdown Brackets

Kickdown bracket attaches to the bottom of Return Springs
Allstar’s adjustable throttle brackets. Fully
adjustable to achieve correct cable setting. ALL54276 ALL54163
Part No. Description
Universal
ALL54276 GM Style, Clear springs for
ALL54277 GM Style, Black carburetor are 11-1/2" long unextended. Package of 2.
ALL54278 Lokar Style, Clear
ALL54279 Lokar Style, Black Throttle Bushing Kit
ALL54164
Carb Stud Spacers Aluminum bushings are stepped for
clearance and adapt from 1/2" to 1/4" holes.
ALL99388
Spacers provide added clearance
between throttle brackets and carburetors when needed.
Spacers are 5/16" tall with 11/16" I.D. Package of 2.

2023 - 2024 HOT ROD AND EARLY MUSCLE 69

Hot Rod Ford 9" Housings Ford 9" Axle Bearing
Assembly
ALL72315
Replacement rear axle bearing used in many Ford car and
truck rear ends. Bearing measures 3.150" O.D. to fit into
Big Ford housing ends and has an I.D. of 1.565". A seal and
press-on retaining sleeve are included.
Steel Hot Rod housings are built with all new
components. The center section is centered, so the Ford 9" Axle Spacer Plates
pinion yoke is offset approximately 1” to the right allowing Spacer plate takes the place of drum
for symmetric tube bracketry on each side. Housing brake backing plate and properly
includes vent, carrier studs, and axle bearing retainer preloads the tapered style axle
T-bolts. Tube diameter is 3” with 3/16” wall thickness and bearing. Spacers fit large bearing
features large bearing Late/Torino style ends. Axles sold Ford 9" housing ends. Sold each.
separately Part No. Description
ALL72318

Axle Housing Width ALL72318 Late/Torino Style

Part No. Axle Housing Width w/ Axle* ALL72319 Early Style
ALL68830 51" 56"
ALL68832 53" 58"
ALL68834 55" 60"
Ford 9" Axle Retainers
*Width measurements are from axle flange to axle flange when using axles with a 2-1/2" offset.
Retainer bolts to the housing end to
retain the axle/bearing into large bearing
Ford 9" housings. Steel retainer is 3/16"
Ford 9" Cut-to-Fit Flanged Axles thick and designed to fit over axles,
Cut-to-fit 31-spline axles eliminating the need to remove bearing
for Ford 9" rear ends are from axle.
a great alternative to Part No. Description
custom axles for street, ALL72316 Late Torino Style (3/8" Fasteners)
drag racing, and circle ALL72317 Early Style (1/2" Fasteners)
track use. Axles are drilled
for .687" press-in style wheel studs and have multiple 9" Ford Backing Plate T-Bolts
wheel bolt patterns for 5 on 4-1/2", 4-3/4" and 5" bolt Unique T-head bolts are required
circles. Axles have .470" thick flanges with a 5.94" outer to fasten backing plates or brake
diameter and a 3.06" hub register to center most rotors brackets to Ford 9" housing ends.
and drums. Axles with bearings have a 3.150" O.D. bearing Kits include bolts, lock washers
installed for housings with large bearing ends, a press-on and nuts. Package of 8.
sleeve to retain bearing to the axle, and an axle retainer Part No. Description
for large bearing late/Torino-style housing end. Wheel ALL72042 3/8"-24 x 1-1/4" (Late/Torino Style)
studs sold separately. ALL72043 1/2"-20 x 1-1/8" (Early Style)
Part No. Description
ALL67500 Axle, 29-1/2" Long (with 10" of Spline) GM 7.5" Ring Gear Spacer
ALL67501 Axle with Bearing, 29-1/2" Long (with 10" of Spline)
ALL67502 Axle, 33" Long (with 9" of Spline) ALL70100
ALL67503 Axle with Bearing, 33" Long (with 9" of Spline) Spacer allows installation of 3.23
Note: Axle includes a spacer which allows axle to be a replacement for 2.36" or 2.50" offset and numerically higher ratio gear
axles. Spacer is pre-installed between axle flange and bearing assembly for 2.50" offset. sets with standard thickness ring
Related Items gears into 3.08 and numerically
lower carriers. Steel spacer is .3125"
Part No. Description
ALL44111 1/2"-20 Wheel Studs, 5-Pack
thick and includes ten 7/16"-20 x
ALL44117 5/8"-18 Wheel Studs, 5-Pack 1-1/4" UHL LH bolts.
ALL72315 Replacement Axle Bearing
Gear Marking Compound Kit
Ford 9" Housing Ends ALL78250
Housing ends are welded into Gear marking compound kit is a
3/16" wall x 3" O.D. axle tubes good way to identify correct
when building a custom width gear contact area when
housing or converting to larger installing or adjusting ring and
axles. Ends feature a stepped pinion gear sets. Kit includes gear
design with a beveled welding flange to help position marking compound and application
flange in tube for easier installation. brush.
Part No. Description
ALL68308 Late/Torino Style
ALL68309 Early Style

70 2023 - 2024 HOT ROD AND EARLY MUSCLE

Ring And Pinion Installation Kits
Allstar ring and pinion installation kits are available with or without bearings. Kits contain all the hard-to-find individual parts
for a quick, trouble-free installation.
Bearing Kits Include:* Shim Kits Include:*
• Pinion And Side (Carrier) Bearings • Pinion Seal
• Pinion Seal • Pinion Depth Shims
• Pinion Depth Shims • Adjustable Side (Carrier)
• Adjustable Side (Carrier) Shims • Shims, Two (If Applicable)
• Crush Sleeve or Solid Spacer • Crush Sleeve or Solid Spacer
• Pinion Nut • Pinion Nut
• 1-oz Tube of Silicone or Gasket • 1-oz. Tube of Silicone or Gasket
• Gear Marking Compound • Gear Marking Compound
• Ring Gear Bolts • Ring Gear Bolts
*Kit components shown for reference only, specific components will vary depending on application.

Bearing Kit Shim Kit Carrier Type Application

General Motors
ALL68515 ALL68615 10-Bolt 7.5", Passenger and Light Truck S-10 1982-1998
– ALL68616 10-Bolt 7.5", Passenger, Except Monza 1977-1981
– ALL68622 10-Bolt 8.2", Chevy Passenger and G-10 Van, 30-Spline Pinion
ALL68521 ALL68621 10-Bolt 8.5", 30-Spline Pinion Passenger and Light Truck 1964-72
ALL68518 ALL68618 12-Bolt 8.875", Chevy And GMC Truck and Blazer, 1.438" Pinion 1970-98
ALL68519 ALL68619 12-Bolt 8.875", Chevy High-Performance Passenger Axle, 1.625" Pinion
Chrysler
ALL68532 ALL68631 8-3/4" 489 Casting with 2.000" I.D. Carrier Bearings (Large #9 on Side of Casting)
ALL68531 ALL68631 8-3/4" 489 Casting with 1.796" I.D. Carrier Bearings (Large #9 on Side of Casting)
ALL68537 ALL68637 8-3/4" 742 Casting with 1.796" I.D. Carrier Bearings (Large #2 on Side of Casting)
Ford Motor Company
– ALL68639 8" “Pig” Type, 25-Spline Pinion
ALL68513 ALL68613 8.8" Salisbury Type qith 10-Bolt Cover, 30-Spline Pinion
ALL68510 ALL68610 9" 2.893" Carrier Bearing, Stock 28-Spline Pinion Support, Solid Spacer
ALL68511 ALL68611 9" 2.893" Carrier Bearing, Stock 28-Spline Pinion Support, Crush Sleeve
ALL68509 ALL68610 9" 3.062" Carrier Bearing, Stock 28-Spline Pinion Support, Solid Spacer
ALL68512 ALL68611 9" 3.062" Carrier Bearing, Stock 28-Spline Pinion Support, Crush Sleeve
ALL68539 ALL68610 9" 3.062" Carrier Bearing, Daytona 28-Spline Pinion Support, Solid Spacer
ALL68538 ALL68611 9" 3.062" Carrier Bearing, Daytona 28-Spline Pinion Support, Crush Sleeve
ALL68543 ALL68610 9" 3.250" Carrier Bearing, Daytona 28-Spline Pinion Support, Solid Spacer
ALL68542 ALL68611 9" 3.250" Carrier Bearing, Daytona 28-Spline Pinion Support, Crush Sleeve
ALL68540 – 9" 3.250" Carrier Bearing, MW or Strange 28-Spline Pinion Support, No Spacer or Crush Sleeve
ALL68541 – 9" 3.250" Carrier Bearing, MW or Strange 35-Spline Pinion Support, No Spacer or Crush Sleeve
Dana
ALL68533 ALL68633 – Model 44/1967-1997
ALL68534 ALL68634 – Model 60 And 61/1966-1998

Ring and Pinion Gear Sets

Quality differential components are suitable for race, street, and off-road use. Lapped in matched sets for quiet operation.

GM 7.5"
Sets fit 10-bolt with 7.5" ring gear, 1.438" diameter pinion
stem and 27-spline pinion.
Part No. Ratio Tooth Part No. Ratio Tooth
ALL70110* 3.23 42-13 ALL70115† 3.73 41-11
ALL70112* 3.42 41-12 ALL70116* 4.10 41-10
ALL70113† 3.42 41-12 ALL70117† 4.10 41-10
ALL70114* 3.73 41-11 ALL70118* 4.56 41-9
*Set includes standard width ring gear for use with 3.23 and numerically higher ratio carriers or Ford 9"
when using 3.08 and numerically lower ratio carriers and ALL70100 spacer. Sets fit 10-bolt with 9" ring gear, 1.313" diameter pinion
stem and 28-spline pinion.
GM 8.5"
Part No. Ratio Tooth Part No. Ratio Tooth
Sets fit 10-bolt with 8.5" ring gear, 1.625" diameter pinion ALL70010 3.50 35-10 ALL70028 5.14 36-7
stem and 30-spline pinion. ALL70012 3.70 37-10 ALL70030 5.29 37-7
Part No. Ratio Tooth Part No. Ratio Tooth ALL70014 3.89 35-9 ALL70032 5.43 38-7
ALL70120 3.08 40-13 ALL70126 4.10 41-10 ALL70016 4.11 37-9 ALL70034 5.67 34-6
ALL70122 3.42 41-12 ALL70128 4.56 41-9 ALL70018 4.33 39-9 ALL70036 5.83 35-6
ALL70124 3.73 41-11 ALL70020 4.56 41-9 ALL70038 6.00 30-5
ALL70022 4.71 33-7 ALL70040 6.20 31-5
ALL70024 4.86 34-7 ALL70042 6.33 38-6
ALL70026 5.00 30-6 ALL70044 6.50 39-6

2023 - 2024 HOT ROD AND EARLY MUSCLE 71

GM Axle C-Clips Pinion Yokes
Replacement C-clips for popular GM 10 and
12-bolt axles. Package of 2.

Part No. Description

ALL66120 10-Bolt (7.5")
ALL66121 10-Bolt (8.5") and 12-Bolt (8.875")

ALL68380 ALL68382 ALL68384

Ford 9" Housing Studs Part No. Spline U-Joint Width Cap Dia. Material Length
Ford 9" Yokes
ALL72040 ALL68384 28 1310 3-1/4" 1.062" Aluminum Standard
Studs secure the center section ALL68375 28 1310 3-1/4" 1.062" Cast Steel Standard
to the housing and are installed ALL68376 28 1330 3-5/8" 1.125" Cast Steel Standard
by pulling through with a nut for a ALL68377 28 1330 3-5/8" 1.125" Cast Steel 1" Longer
press fit. 3/8"-24 threads. Package ALL68380 28 1350 3-5/8" 1.187" Forged Steel Standard
of 10. ALL68382 35 1350 3-5/8" 1.187" Forged Steel Standard
Quick-Change Yokes
ALL68385 10 1310 3-1/4" 1.062" Cast Steel Standard
Ford 9" Gaskets ALL68386 10 1310 3-1/4" 1.062" Cast Steel 1" Longer
Gaskets are precision die-cut to
ensure a leak free seal. Pinion Nuts
Replace original worn or damaged nuts each
time a gear set is changed. Nut secures
driveshaft yoke to pinion gear.
Part No. Description ALL72044
Part No. Description
ALL72044 Paper ALL72155 Ford 8.8" and Standard 9"
ALL72045 Composite with Steel Core ALL72156 GM 7.5 and 8.5

U-Joints
Performance U-joints are
Cross Pins ALL68120 greasable and fit a variety of
Part No. Description driveshaft
ALL68120 Ford 8.8" and 9" (3/4") combinations.
ALL68167 GM 10-Bolt (7.5" Ring Gear) 1310 Series: 3.218" Wide with 1.062" Diameter Caps
ALL68163 GM 10-Bolt (8.2" Ring Gear) 1330 Series: 3.622" Wide with 1.062" Diameter Caps
ALL68161 GM 10-Bolt (8.5" Ring Gear)
1350 Series: 3.622" Wide with 1.187" Diameter Caps
ALL68165 GM 12-Bolt (8.875" Ring Gear)

U-Joints with Same Cross Width

Ford 9" Pinion Support
Part No. Description
ALL68396 ALL69030 1310 Series
“Daytona” forged aluminum pinion ALL69031 1330 Series
support replaces original equipment ALL69032 1350 Series
cast iron support. Support is furnished
with races installed and is for use with U-Joints with Different Cross Widths
28-spline pinion gears. Part No. Description
ALL69034 1310 to 1330
ALL69037* 1310 to 1330 Width = B, Caps = A
ALL69035 1310 to 1350
Pinion Seals ALL69036 1330 to 1350
Replace leaking or damaged seals *Standard 1330 spread with larger 1.125" diameter caps.
in most popular differentials.
Part No. Description U-Bolt Kits
ALL72145 Quick-Change 5/16" Wide
U-bolt kits for 1310,
ALL72144 Quick-Change 1/2" Wide
ALL72143 Quick-Change 3/4" Wide
1330 and 1350 series
ALL72146 Ford 9" Standard, 28-Spline, 3" O.D. U-joints secure drive-
ALL72147 7.5" GM shaft to pinion yoke.
ALL72148 8.5" GM Sold in pairs with nuts
and lock washers.
Pinion Yoke Wrench U-Bolt U-Joint Stud CTC
Series Cap Thread “A” “B”
ALL68372 Std. ALL69015 1310/1330 1-1/16" 5/16"-24 1-3/4" 1.400"
Wrench fastens to most popular pinion X-Long ALL69017 1310/1330 1-1/16" 5/16"-24 2" 1.400"
flanges and companion flanges to hold Std. ALL69018 1330 † 1-1/8" 5/16"-24 1-7/8" 1.575"
when setting bearing pre-load and Std. ALL69016 1350 1-3/16" 3/8"-24 2" 1.625"
tightening retaining bolt or nut. †
1330 with big caps (1.125")

72 2023 - 2024 HOT ROD AND EARLY MUSCLE

GM U-Joint Strap Kit Two-Point Non-Retractable Seat Belts
ALL69014 Two-point, non-retractable lap
Replacement O.E. style U-joint belt is manually tightened and
strap kit fits popular GM mounts to two points on the
pinion yokes including 7.5", 8.2", 8.5" vehicle floor. Belts feature an
10-bolt and other popular rear ends. Kit easy push-button release and
is designed for 1-1/8" (1.125") diameter caps and are sold individually. Installation
includes (2) 5/8" wide steel straps with 1-7/8" CTC holes hardware kits sold separately.
and (4) 1-1/2" long 5/16"-24 grade 8 bolts. Part No. Description
ALL98110 Black
ALL98111 Gray
Ford 9" U-Joint Girdle Kit ALL98112 Charcoal
ALL69025 ALL98113 Tan

Aluminum U-joint girdles Related Parts

replace standard steel
Part No. Description
U-bolts and provide more
ALL98120 Anchor Plates, 1-Pair
surface clamping area for ALL98121 Installation Hardware Kit
1310 and 1330 (1-1/16") U-joint
caps. Girdle design helps
prevent over-tightening and includes mounting hardware. Three-Point Retractable Seat Belts
Three-point retractable system has three
anchoring points, two on the vehicle floor
Universal Driveshaft Loop and one on the B-pillar. Belts feature an
ALL69000 easy push-button release and are sold
Universal driveshaft loop each. Installation hardware kits
contains the sold separately.
driveshaft if a yoke Part No. Description
or U-joint fails. Loop is 1/4" ALL98115 Black
thick x 2" wide mild steel and ALL98116 Gray
fully adjustable to fit most cars. ALL98117 Charcoal
ALL98118 Tan

Driveshaft Loop for 1979-2004 Mustangs Related Parts

ALL69006 Part No. Description
Driveshaft safety loop bolts on to ALL98120 Anchor Plates, 1-Pair
help retain the front ALL98121 Installation Hardware Kit
ALL98121
of the driveshaft in the
event of a U-joint or other drivetrain Seat Belt Anchors
component breakage. Black epoxy-coated ALL98120
all-steel loop includes mounting hardware and Anchor plates reinforce stock
complete instructions. Loop is designed to fit inside type floor pan when mounting seat
factory tunnel and work with most driveshafts up to 4" in belts. Plates are 1/8" thick and have a 9/16"
diameter. mounting hole. Package of 2.

Swan Neck Mirrors Seat Track Assembly

ALL76400 ALL98100
Beautiful exterior rear view Mount aftermarket seats
mirrors have a 4" diameter quickly and easily. Includes
stainless steel head and a 5" two seat tracks, adjustment
long chrome arm. Mounting handle and hardware.
is blind with one bolt. Sold in
pairs.

4" Peep Mirrors Bolt-In Lower Seat Mount Brackets

ALL76401 ALL98130
Chrome Peep mirrors have a Seat brackets are
4" stainless steel head and can constructed of 3/16"
be slipped over the top edge of aluminum and designed
driver and passenger side doors to fasten an aluminum
and secured with Allen head screws. racing seat to a reinforced
Arm pivots 360° to any position and stock style floor pan. Additional
has a crowned end to lock in the floor reinforcements recommended as
desired position. Includes protective required per sanctioning body rules.
rubber pads. Sold in pairs.

2023 - 2024 HOT ROD AND EARLY MUSCLE 73

“Double D” Steering Shafts Aluminum Lowering Blocks
Solid steel shaft has the appearance of two D‘s stacked Easily adjust ride height on leaf spring cars. Standard
back to back when viewed from the end or simply a 3/4" and adjustable styles are available in extruded or billet
round shaft with flats on opposite sides. Often used with aluminum. Blocks are 2-1/2"W x 5"L. Sold each.
stock-type couplers, this shaft can be used in assemblies Part No. Height Pin Dia.
without welding. Commonly connected to U-joints using Extruded Aluminum
a set screw, the shaft should be dimple drilled to help ALL56130 1" 9/16"
pilot set screws and help prevent the assembly from ALL56131 1-1/2" 9/16"
sliding apart. ALL52132 oversized rod end is commonly ALL56132 2" 9/16"
ALL56131
used to support steering shaft. Consult sanctioning rules ALL56133 2-1/2" 9/16"
to verify proper installation when building a steering ALL56134 3" 9/16"
Billet Aluminum
assembly.
ALL56060 3/4" 5/8"
Part No. Description ALL56061 1" 5/8"
ALL52175 24" Shaft ALL56062 1-1/2" 5/8"
ALL52176 30" Shaft ALL56063 2" 5/8" ALL56065
ALL52177 36" Shaft ALL56064 2-1/2" 5/8"
ALL52178 60" Shaft ALL56065 3" 5/8"
ALL52179 72" Shaft ALL56136* 1-1/2" Adj. 5/8"
ALL56138* 2-1/2" Adj. 5/8" ALL56136
Mustang ll Spindles *Pins on blocks can be adjusted 1-1/4" to the front or rear of center position.
Mustang II/Pinto spindles are direct replacements for
stock O.E. spindles featuring the stock 10° pin inclination Leaf Spring U-Bolt
and upper and lower ball joint tapers. Spindles accept
Granada or Hybrid style rotors with corresponding caliper ALL68344
brackets, calipers and brake pads. Leaf spring U-bolt fits 3" axle
tubes, has a 1/2" diameter and is 10"
Stock Height Spindles long. Heat-treated steel bolt is sold each.
Part No. Description
ALL56307 Spindles, Pair
ALL56308 Spindle LH
ALL56309 Spindle RH U-Bolt Pads
Universal style U-bolt pads fit 3" diameter axle tubes and
2" Dropped Spindles leaf springs Top View
Part No. Description up to 2-1/2"
ALL56305 Spindles, Pair wide using
1/2" U-bolt
Related Components fasteners.
Part No. Description Center
ALL42110 LH Caliper Bracket for Granada Rotor ALL60037 ALL60036
alignment ALL60038
ALL42111 RH Caliper Bracket for Granada Rotor
hole is 5/8" to accept most lowering
ALL42084 LH GM Metric Caliper
ALL42083 RH GM Metric Caliper
blocks or spring bolts. 1/4" thick formed steel pads have a
ALL72308 Granada Master Bearing and Seal Kit
gusseted shock mount with a welded bung to accept 1/2"
mounting hardware.
Part No. Description
ALL60036 RH Pad
ALL60037 LH Pad
ALL60038 Dual Mount Pad

Leaf Spring Shackles

6-hole brackets for mounting leaf
springs are 9"L x 2"W and have 1/2"
diameter holes spaced 1" on center.
Package of 2.
Part No. Description
ALL60055 Steel 1/4" Thick
ALL60056 Aluminum 3/8" Thick

ALL60055 ALL60056

74 2023 - 2024 HOT ROD AND EARLY MUSCLE

Tubing Notcher Deburring Tool
ALL10411 ALL11036
Notcher works with most standard A fast and easy way to
hole saws to creates a notch on end remove burrs from the
of round tubing for properly attaching edges of machined or cut metals.
round tubing to round tubing, often Five-piece kit includes handle,
used when building roll cages, telescopic blade holder, and three unique blades. Handle
bumpers or custom chassis. Notcher has built-in storage for blades. Blade holder adjusts from
features an adjustable holding fixture 1" to 5".
which automatically centers tubing Replacement Part
to create a notch from 90° to 45° Part No. Description
degrees in tubing up to 2". Notcher is ALL99328 Replacement Blades, 3 Pack
commonly clamped into a bench vise or bench mounted
and used with a hand drill. Note: Hole saw used should be Sheet Metal Shrinker
the size of tube accepting notched tube.
Stretcher Combo
Replacement Part Make smooth radius curves
Part No. Description and contours with Allstar’s
ALL10402 5/8"-18 Thread Adapter ALL10402 shrinker/stretcher combo.
Note: Tubing notcher includes a 1/2"-20 arbor thread and 5/8"-18 adapter. Most hole saws up to Shrinker creates
1-1/8" diameter use 1/2"-20, larger hole saws use 5/8"-18 thread. inside curves and
stretcher expands for outside
Hole Saw Set curves. Each completely assembled
tool includes a handle and mounting
ALL10412 hardware for securing to a workbench.
Use with tubing notchers. Does Tools are capable of forming 18-gauge
not include an arbor for a hand mild steel, 16-gauge aluminum and
drill. Set includes one of each 20-gauge stainless. Kit is great for
size: 3/4", 1", 1-1/4", 1-1/2", forming fenders, radiator shrouds, or
1-5/8", and 1-3/4". Hole saws any item needing a smooth radius curve.
up to 1-1/8" diameter use 1/2"- Part No. Description
20 thread, larger hole saws use ALL11023 1 Base with Two Jaws
5/8"-18 thread. ALL11024 2 Bases with Two Jaws
Individual Hole Saws
Part No. Description Part No. Description Step Drill Sets
ALL10413 3/4" ALL10417 1-1/2"
Drill multiple size holes with one bit. Drill
ALL10414 1" ALL10418 1-5/8"
sheet metal and aluminum without
ALL10416 1-1/4" ALL10419 1-3/4"
deforming or distorting. Bits start on
Note: Hole saws up to 1-1/8" diameter use 1/2"-20 thread, larger hole saws use 5/8"-18 thread.
contact, deburr, and chamfer while
drilling, and do not require a center
Tin Snips punch. Titanium nitride coated high
ALL11041
Durable tin snips have speed steel. 1/4" shank.
offset blades to keep ALL11040 (3-Piece Set)
hands clear of metal while Drill Bit Sizes
cutting. Non-slip jaws cut Six Step 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"
through sheet aluminum and up to Nine Step 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"
Thirteen 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32",
18-gauge low-carbon steel. Blade length
Step 7/16", 15/32", 1/2"
1-1/4", total tool length 9-1/4".
Part No. Description ALL11041 (2-Piece Set)
ALL11030 Red, Left Hand Drill Bit Sizes
ALL11031 Green, Right Hand 1/4", 25/64", 35/64", 11/16", 13/16", 7/8", 1", 1-1/8", 1-7/32",
Eleven Step
1-1/4", 1-3/8"
3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4",
Twelve Step
13/16", 7/8"

Cleco Pin Fastener Kits

Cleco pins are reusable and easily
make a temporary connection
between pieces of sheet metal
during fitting. Pins will work with
thicknesses up to 1/4", kits include
pliers and 10 pins.
Part No. Description
ALL18221 Kit with 1/8" Pins
ALL18225 Kit with 3/16" Pins

2023 - 2024 HOT ROD AND EARLY MUSCLE 75

Aluminum Air Tanks Snap-In Rubber Valve Stems
Portable lightweight aluminum tanks provide an Economical rubber valve stems pull through wheel
easy way to air up tires. Welded tanks will not rust for easy installation. Large stem for 5/8" hole is
or corrode and are pressure tested to military the most popular size valve stem used in racing
specifications up to 300 PSI. wheels. Smaller stem for .453" hole is commonly
Part No. Description found in stock steel and utility vehicle wheels.
ALL10531 7" x 10" Horizontal Tank, 1-1/2 Gallon Part No. Description
ALL10532 7" x 24" Vertical Tank, 2-3/4 Gallon ALL44136 Stem for 5/8" (.625") Hole, 4-Pack
ALL10530 9" x 11" Horizontal Tank, 2-3/4 Gallon ALL44139 Stem For .453" Hole, 4-Pack
ALL10534 9" x 20" Horizontal Tank, 5 Gallon

ALL10532
Flush-Mount Valve Stem Kit
Valve Stem Puller
ALL44137
ALL44032 Chrome-finished steel, bolt-in,
Puller threads onto valve stem mounts in standard
valve stem and properly pulls rubber valve stems into valve stem location and provides a
place. Large rubber block protects expensive wheels and clean semi-flush appearance.
creates leverage when pulling. Valve stem features an O-ring
to seal against the outside of the wheel
Valve Core Tool and a rubber grommet, washer, and nut that seals against
the inside of the wheel. Kit includes four valve stems with
ALL44030 dust covers and an extension filler tube. Valve stems are
Easily remove and install new valve designed for use in wheels with .453” valve stem holes.
cores. Base of handle has a machined pattern to aid with
grip. Ergonomically designed and crafted from stainless
steel. Measures 3" overall length.

Amalie Pro High-Performance

Ford Type F Fluid
Ford Type F is an excellent, durable fluid Synthetic Blend Motor Oil
for use wherever a 2-P or M2C33-F fluid is A blend of high-quality synthetics and
recommended. mineral base stocks for outstanding
engine protection under severe driving
1-Quart 1 Case of
Bottle (12) Quarts conditions including high-stress racing
AMA62836-56 AMA160-62836-56 use. API certified for catalytic converter
compatibility.
Chrysler ATF+4 1-Quart 1 Case of
Description Bottle (12) Quarts
Chrysler ATF+4 is recommended for 5W-20 Motor Oil AMA75646-56 AMA160-75646-56
Chrysler and Daimler Chrysler automatic 5W-30 Motor Oil AMA75666-56 AMA160-75666-56
transmissions. 5W-40 Motor Oil — AMA160-65696-56
1-Quart 1 Case of 5W-50 Motor Oil AMA75616-56 AMA160-75616-56
Bottle (12) Quarts 10W-30 Motor Oil AMA75676-56 AMA160-75676-56
AMA62886-56 AMA160-62886-56 10W-40 Motor Oil — AMA160-75686-56
15W-50 Motor Oil AMA75636-56 AMA160-75636-56
20W-50 Motor Oil — AMA160-75696-56

Amalie Imperial Turbo

Amalie EliXir Full-Synthetic Motor Oil
Formula Motor Oils Carefully developed to meet the most current API
Amalie Imperial Turbo Formula motor oil Service Classification. EliXir full-synthetic motor
protects regardless of what the operating oil is formulated with 100% synthetic base stocks
temperatures are. Imperial Turbo meets or and a package of state-of-the-art additives.
exceeds new car manufacturer warranty Versatile formula is well suited for street
requirements. API certified for compatibility or competition racing applications. Sold in
with catalytic converters. quart bottles, or in cases of 12 quarts.
1-Quart 1 Case of (12) 1-Quart 1 Case of
Description Bottle Quarts Description Bottle (12) Quarts
5W-20 Motor Oil AMA71046-56 AMA160-71046-56 0W-40 Motor Oil — AMA160-65776-56
5W-30 Motor Oil AMA71066-56 AMA160-71066-56 5W-30 Motor Oil AMA75766-56 AMA160-75766-56
10W-30 Motor Oil AMA71076-56 AMA160-71076-56 5W-50 Motor Oil AMA75716-56 AMA160-75716-56
10W-40 Motor Oil AMA71086-56 AMA160-71086-56 15W-50 Motor Oil AMA75736-56 AMA160-75736-56

76 2023 - 2024 HOT ROD AND EARLY MUSCLE

Amalie DOT 3 and Elixir Full Synthetic
DOT 4 Brake Fluids 75W-90 Gear Lube
Amalie DOT 3 Premium brake Elixir gear lubricant delivers maximum
fluid minimizes corrosion, protection to gear sets, providing
lubricates, controls seal longer gear life and improved efficiency.
swelling, and operates over a GL-5 lubricant is manufactured from
wide range of temperatures. 100% synthetic base oils and includes
DOT 3 fluid has a minimum a specialized additive system for
boiling point of 450°F and unsurpassed durability. Sold in one-quart
meets or exceeds federal bottles, or in cases of 12 quarts.
motor vehicle safety standards. 1-Quart 1 Case of
Amalie DOT 4 Premium brake fluid also meets or exceeds Bottle (12) Quarts
federal standards, has corrosion inhibitors, and will AMA73166-56 AMA160-73166-56
maintain proper seal longevity and performance. With
a minimum boiling point of 475°F, DOT 4 fluid provides
service over a wide temperature range. Enhanced over Amalie Limited Slip MP
DOT 3, the fluid can be used wherever DOT 3 or DOT 4 Hypoid LS GL-5 Gear Lube
fluids are recommended.
80W-90
1 Case of 1 Case of
12-oz. 8-oz. (12) 12-oz. (24) 8-oz. Formulated for limited slip differentials,
Description Can Can Cans Cans MP contains and additive to prevent
DOT 3
AMA65031-92 — AMA160-65031-92 — chatter. Meets API GL-5 standards.
Brake Fluid
DOT 4 1-Quart 1 Case of
­— AMA65041-92 — AMA160-65041-92 Bottle (12) Quarts
Brake Fluid
AMA73026-56 AMA160-73026-56

Blue Hi-Temp Grease

Amalie Hypoid Gear

Multi-Purpose GL-5 Gear Lube
An economical, competitively priced lube
Lithium complex grease is intended for automotive for basic rear axle performance needs.
applications requiring water resistance and protection Available in 80W-90 and 85W-140.
from extreme pressure, oxidation, and rust. Suitable 1 Quart 1 Case
Description Bottle (12) Quarts
for wheel bearings, ball joints, etc. Sold in 1-pound tubs,
Hypoid Gear
14-ounce cartridges, or in cases of tubs or cartridges. Multi-Purpose AMA73116-56 AMA160-73116-56
1 -lb. 1 Case of 14-oz. 1 Case of 75W-90
Tub (12) Tubs Cartridge (10) Cartridges Hypoid Gear
AMA68326-93 AMA160-68326-93 AMA68321-91 AMA160-68321-91 Multi-Purpose AMA73156-56 AMA160-73156-56
85W-140
Amalie EliXir Synthetic Blend Grease

Amalie EliXir Synthetic

LS GL-5 Gear Lube
Environmentally “green” as well as green in color, EliXir full-synthetic gear lube is a
EliXir protects better than older products and assures wide range, multi-grade gear lube
that leakage will not occur. Outstanding protection (75W-85W-140) with robust additives and
under heavy loads at high and low temperatures. EliXir improved viscosity modifiers. May be used
Synthetic blend grease offers improved protection to replace 75W-90 and 85W-140 lubes
when compared to traditional greases. Sold in 15-ounce currently being used in mixed fleets.
cartridges, or in cases of 10 cartridges.
1 Quart 1 Case
15-oz. Cartridge 1 Case of (10) 15-oz. Cartridges Bottle (12) Quarts
AMA68342-94 AMA160-68342-94 AMA71376-56 AMA160-71376-56

2023 - 2024 HOT ROD AND EARLY MUSCLE 77

Amalie Transmission Fluids Dexron VI Synthetic
DX III-H/M transmission Fluid Automatic Transmission Fluid
DX III-H/M transmission fluid is a premium Dexron VI is a synthetic blend, newly
multi-purpose automatic transmission formulated and licensed and approved
fluid for use in transmissions specifying for universal use in passenger cars and
Dexron III H/Mercon fluid as well as Allison light trucks requiring Dexron IV or earlier
C-3 and C-4 fluids. generation Dexron.
1-Quart 1 Case of 1-Quart 1 Case of
Bottle (12) Quarts Bottle (12) Quarts
AMA72836-56 AMA160-72836-56 AMA72876-56 AMA160-72876-56

Universal Synthetic Mercon V Automatic

Automatic Transmission Fluid Transmission Fluid
Universal Synthetic Automatic Mercon V is a new formulation for use in
Transmission Fluid is a full synthetic new Ford transmissions and transaxles.
reformulated for universal applications V meets the new Ford requirements as
in modern traditional automatic well as requirements of vehicles requiring
transmissions. Mercon ATF, Dexron III, Chrysler ATF+3
1-Quart 1 Case of and ATF+4, and Allison C-3 and C-4.
Bottle (12) Quarts
1-Quart 1 Case of
AMA72866-56 AMA160-72866-56 Bottle (12) Quarts
AMA62856-56 AMA160-62856-56

AntiGravity Batteries offers lithium-Ion batteries that are not only 70% lighter than
comparable lead/acid units, but also offer twice the cranking power. One of the most cost-
effective methods of reducing the weight of a performance/race car, simply changing the
battery can reduce weight up to 35 lbs., while also providing improved handling, shorter
braking distances, and better acceleration. AntiGravity Batteries offers a complete line of
12- and 16-volt lithium-Ion batteries, battery chargers, and accessories.

Lithium-Ion Motorsports Batteries

These lithium-ion starter batteries are offered in both 12- and 16-volt models. Small-case
batteries are ideal for the hot rod market, combining a compact size with high power, while
weighing as much as 70% less than a comparable lead-acid battery. Antigravity Batteries
also offers a number of standard group size batteries with massive starting power at a
greatly reduced weight. Batteries with an RS designation feature wireless jump starting,
allowing users to active integrated reserve capacity via a remote key fob for emergency
starting.
Part No. Group Size Dimensions CCA Weight
12-Volt Batteries
ANTAG-401 — 4-3/8"L x 1-3/8"W x 3-3/4"H 120 1.0 lb.
ANTAG-1601 — 4-1/2"L x 3-1/4"W x 5-1/4"H 480 3.25 lbs.
ANTAG-ATX12-16-R YTX 5-7/8"L x 3-7/16"W x 5-1/8"H 480 3 lbs.
ANTAG-ATX12-20-R YTX 5-7/8"L x 3-7/16"W x 5-1/8"H 600 4.2 lbs. ANTAG-26-16-RS
ANTAG-ATX12-24-R YTX 5-7/8"L x 3-7/16"W x 5-1/8"H 720 5.0 lbs.
ANTAG-ATX20-RS YTX20 6-15/16"L x 3-7/16"W x 5-1/8"H 680 3.8 lbs.
ANTAG-ATX30-RS YTX30 6-1/2"L x 5"W x 6-15/16"H 880 5.75 lbs.
ANTAG-26-16-RS 26 7-3/4"L x 6-1/2"W x 7-1/4"H 850 8.2 lbs.
ANTAG-26-20-RS 26 7-3/4"L x 6-1/2"W x 7-1/4"H 925 8.5 lbs.
ANTAG-35-40-RS 35 9"L x 6-7/8"W x 8-5/8"H 1500 16.5 lbs.
ANTAG-51R-24-RS 51R 9-7/16"L x 5-1/4"W x 8-5/8"H 1000 8.5 lbs.
ANTAG-51R-30-RS 51R 9-7/16"L x 5-1/4"W x 8-5/8"H 1200 11.7 lbs.
ANTAG-H5-40-RS 47 9-1/2"L x 7"W x 7-1/2"H 1500 15.2 lbs.
ANTAG-H6-30-RS 48 10-3/4"L x 7"W x 7-1/2"H 1200 13.9 lbs.
ANTAG-H6-60-RS 48 10-3/4"L x 7"W x 7-1/2"H 1800 18.2 lbs.
ANTAG-H7-40-RS 94R 12-1/4"L x 7"W x 7-1/2"H 1500 15.6 lbs.
16-Volt Battery
ANTAG-VTX-20-R 5-7/8"L x 3-7/16"W x 5-1/8"H 500 5.2 lbs.

78 2023 - 2024 HOT ROD AND EARLY MUSCLE

Micro-Start Jump Starters/Power Supplies
This compact personal power supply will fit in a shirt pocket but has enough power to start an
automotive engine, powersport vehicle, or charge any modern day electronic device (laptop,
tablet, cellphone, or GoPro). Includes a built-in LED flashlight. Complete with carrying case
and accessories.
Power/Peak
Part No. Dimensions Capacity (mAh) Ports Weight
(CCA)
ANTAG-XP-SPT-BLK 5"L x 2-13/16"W x 7/8"H 150/200 7,500 USB 9.8 oz.
ANTAG-XP-3 6"L x 3"W x 1"H 200/400 8,000 USB (x2) 10.5 oz.
ANTAG-XP-1 6-3/4"L x 3-1/4"W x 1"H 200/400 12,000 USB (x2), 12V, 19V 1.0 lb.
ANTAG-XP-10 9"L x 3"W x 1-1/4"H 300/600 18,000 USB (x2), 12V, 19V 1.2 lbs.

Tire Inflator
ANTAG-MSA-9
Designed for use with the MicroStart XP-1 or XP-10, or to plug into a 12V cigarette lighter, this
compact tire inflator is small enough (3.5"W x 1.5"D x 4.25"H) to fit in a glove box or backpack, yet
powerful enough to inflate automotive tires in an emergency. Great for powersports applications,
bicycles, sports equipment, and small inflatables, as well. Includes cable for use with MicroStart
power supplies, 9-ft. cigarette lighter cable, and accessory tips. Weighs just one pound.

Battery Trackers
Monitor the health and charge status of your 12V battery through your smartphone via Bluetooth.
Battery trackers install in minutes, and monitor the voltage, starting performance, and charging
system performance, yet only draw 1 milliamp. Available for lithium-ion or lead-acid batteries.
Antigravity's smartphone app even stores historical data up to 31 days and can provide low-
voltage alerts.
Part No. Battery Type Dimensions Weight
ANTAG-BTR-1 Lithium-Ion 2-3/4"L x 2"W x 3/4"H 0.2 lbs.

Engine and Fastener Kits

Includes fasteners for intake manifold, valve covers, thermostat housing, alternator
bracket, distributor bracket, motor mounts, oil pan, coil bracket, headers, front cover,
water pump, and fuel pump.
Black Oxide Stainless 300
Application
Hex 12-Point Hex 12-Point
Chevrolet
1986 and Earier
ARP534-9801 ARP534-9701 ARP534-9601 ARP534-9501
350-400 CID, with Headers
396-454 CID* ARP535-9801 ARP535-9701 ARP535-9601 ARP535-9501
1987-95 305-350 CID
— — ARP534-9602 ARP534-9502
with Headers*
1996 and Up 305-350
Vortec with Headers, ARP534-9804 — — —
Except LS1 and LS6
Gen III/LS Series Small Block with or without Headers — ARP534-9705 ARP534-9605 —
Chrysler
318-340-360 Wedge* ARP544-9801 — — ARP544-9501
383-440 Wedge ARP545-9801 — — ARP545-9501
Ford
289-302 CID* ARP554-9801 ARP554-9701 ARP554-9601 ARP554-9501
Boss 302 — — — —
351 Cleveland — — — ARP554-9504
351 Windsor* ARP554-9803 ARP554-9703 ARP554-9603 ARP554-9503
390-428 FE Series — ARP555-9702 ARP555-9602 ARP555-9502
429-460 CID* — — ARP555-9601 ARP555-9501
Pontiac
350-455 CID — — ARP594-9601 ARP594-9501
* 1987 and newer EFI engines or those with aftermarket components may require additional fastener purchase.

2023 - 2024 HOT ROD AND EARLY MUSCLE 79

Valve Cover Bolts Stainless Steel
Available for cast aluminum and Distributor Stud Kits
stamped steel valve covers. Stainless
bolts resist rust and discoloration. Application Hex 12-Point
Chevy Distributor Stud ARP430-1702 ARP430-1701
Description Hex 12-Point Ford Distributor Stud ARP450-1702 ARP450-1701
Cast Aluminum Valve Cover Bolt Sets
1/4"-20, 8 Pieces ARP400-7507 ARP400-7503
1/4"-20, 14 Pieces ARP400-7508 ARP400-7504 Stainless Steel Float Bowl Screw Kits
Stamped Steel or Aluminum Valve Cover Bolt Sets ARP400-0310
1/4"-20, 8 Pieces ARP400-7505 —
For Holley carbs, eight per kit.
1/4"-20, 14 Pieces ARP400-7506 ARP400-7502
350 Chevy Centerbolt
ARP400-7509 ARP400-7510
Valve Covers Stainless Steel Fuel Pump Bolts
Application Hex 12-Point
Chevrolet-Pontiac ARP430-1602 ARP430-1601

Oil Pan Bolt Kits

Black Oxide Stainless 300
Air Cleaner Stud Kit Application
Hex 12-Point Hex 12-Point
Keep the air cleaner firmly in Chevrolet
position with an ARP stud kit. Gen III/LS Series SB,
ARP134-6901 ARP134-6902 ARP434-6901 —
Valley Cover Bolts
Application Black Oxide Stainless 300
Chevrolet Small ARP434-
15/16 x 2.700" OAL — ARP400-0302 ARP234-1802 ARP234-1801 ARP434-1801
Block 1802
15/16 x 3.200" OAL — ARP400-0303
Chevrolet Big Block ARP235-1802 ARP235-1801 ARP435-1802 ARP435-1801
1/4 x 2.700" OAL ARP400-7508 —
Chrysler
1/4 x 3.200" OAL ARP400-7508 —
Chrysler Small Block — ARP200-1801 — ARP400-1801
Ford
Timing Cover, Alternator, 289-302, 351W, 351C ARP254-1802 ARP254-1801 — ARP454-1801
and Water Pump Bolt Kits 390-428 FE Series,
ARP255-1802 ARP255-1801 — —
Big Block
Black Oxide Stainless 300
Application
Hex 12-Point Hex 12-Point
Chevrolet
Gen III/LS Series SB, Timing
ARP134-1501 ARP134-1502 ARP434-1501 ARP434-1502
Cover
Gen III/LS Series SB, Water Intake Manifold Bolts
Pump With Thermostat ARP134-3201 ARP134-3202 ARP434-3201 — Black Oxide Stainless 300
Housing Bolts Application
Hex 12-Point Hex 12-Point
Gen III/LS Series SB, Rear
ARP134-1503 ARP134-1504 — — AMC
Motor Cover
AMC 290-390,
Chevrolet V8 All, Timing ARP114-2001 — — ARP414-2101
ARP200-1502 ARP200-1501 ARP400-1502 ARP400-1501 3/8" Socket
Cover Bolt Kit
Chevrolet
Chevrolet V8 All, Water
ARP130-3202 ARP130-3201 ARP430-3202 ARP430-3201 Gen III/LS Series SB,
Pump Bolt Kit ARP134-8001 ARP134-8002 ARP434-8001 ARP434-8002
Valley Cover Boits
Chevrolet V8 All, Alternator
ARP130-3302 — ARP430-3302 — Chevrolet Small
Bracket Bolt Kit ARP134-2001 ARP134-2101 ARP434-2001 ARP434-2101
Ford Block,
Ford 289-302, SBC Vortec, Fits Most
Aluminum Timing Cover ARP154-1504 ARP154-1503 ARP454-1504 ARP454-1503 Aftermarket ARP134-2002 ARP134-2103 ARP434-2002 ARP434-2102
And Water Pump Aluminum Intakes
Ford 351W, Alternator 396-454 CID,
ARP150-3302 — — — ARP135-2001 ARP135-2101 ARP435-2001 ARP435-2101
Bracket Bolt Kit 1,250" U.H.L.
502 CID, 1,500" U.H.L. ARP135-2002 — ARP435-2002 ARP435-2102
Ford
Stainless Steel Ford 260-351W, 3/8"
ARP154-2001 ARP154-2101 ARP454-2001 ARP454-2101
Starter Bolts Socket
Ford SVO 351, 351C,
Application Hex 12-Point ARP154-2004 — ARP454-2004 ARP454-2104
351M-400
Chevrolet V8 All, Standard ARP430-3502 ARP430-3501
Ford 429-460 CID — — — ARP455-2101
Ford 390-428 CID
Stainless Steel Transmission Pan Bolts “FE” Series
ARP155-2002 ARP155-2102 ARP455-2002 ARP455-2102
Pontiac
ARP430-0401 Pontiac 350-400,
Bolts are for Chevrolet and GM Turbo 3/8" Socket
ARP194-2001 ARP194-2101 ARP494-2001 ARP494-2101
350-400, and have 12-point heads.

80 2023 - 2024 HOT ROD AND EARLY MUSCLE

Stainless Steel Stainless Bolts
Rear End Cover Bolt Kits Conveniently packaged
five to a card. Great for
Part No. Description
ARP437-3001 GM 10-Bolt Rear End Stainless Cover Bolts
attaching accessories.
ARP437-3002 GM 12-Bolt Rear End Stainless Cover Bolts Thread Under Head Stainless Steel
Size Length (in.) Hex 12-Point
1/4"-20 0.515" ARP621-0515 —
Stainless Steel Pulley Bolt Kits 1/4"-20 0.750" ARP621-0750 ARP611-0750
Part No. Description 1/4"-20 1.000" ARP621-1000 ARP611-1000
ARP430-6802 5/16"-24 Stainless Water Pump Pulley Bolts, 12-Point 1/4"-20 1.250" ARP621-1250 ARP611-1250
ARP430-6801 SBC, BBC Stainless Crank Pulley Bolts, 12-Point 1/4"-20 1.750" — ARP611-1750
1/4"-20 2.500" — ARP611-2500
1/4"-20 3.000" — ARP611-3000
1/4"-20 3.250" — ARP611-3250
Stainless Steel 1/4"-20 3.750" — ARP611-3750
Motor Mount Bolt Kits 1/4"-20 4.000" — ARP611-4000
1/4"-20 4.500" — ARP611-4500
Part No. Description
5/16"-18 0.560" ARP622-0560 —
ARP430-3102 Chevy Stainless Motor Mount Bolts, Hex
5/16"-18 0.750" ARP622-0750 ARP612-0750
ARP430-3105 Chevy Stainless Motor Mount Through Bolts, Hex
5/16"-18 1.000" ARP622-1000 ARP612-1000
5/16"-18 1.250" ARP622-1250 ARP612-1250
5/16"-18 1.500" ARP622-1500 ARP612-1500
5/16"-18 1.750" — ARP612-1750
Stainless Steel 5/16"-18 2.000" ARP622-2000 ARP612-2000
5/16"-18 2.250" — ARP612-2250
Carburetor Stud Kits 5/16"-18 2.500" ARP622-2500 ARP612-2500
Part No. Description 5/16"-18 2.750" ARP622-2750 ARP612-2750
ARP400-2401 Standard 5/16" x 1.700" O.A.L. 5/16"-18 3.000" ARP622-3000 ARP612-3000
ARP400-2402 1" Spacer 5/16" x 2.700" O.A.L. 5/16"-18 3.500" — ARP612-3500
5/16"-18 4.000" ARP622-4000 ARP612-4000
5/16"-18 5.000" — ARP612-5000
Stainless 3/8"-16 0.500" ARP623-0500 —
3/8"-16 0.750" ARP623-0750 ARP613-0750
Thermostat Housing Bolt Kits 3/8"-16 1.000" ARP623-1000 ARP613-1000
Part No. Description 3/8"-16 1.250" ARP623-1250 ARP613-1250
ARP430-7402 Chevy Thermostat Housing Bolts, Hex 3/8"-16 1.500" ARP623-1500 ARP613-1500
ARP430-7401 Chevy Thermostat Housing Bolts, 12-Point 3/8"-16 1.750" ARP623-1750 ARP613-1750
3/8"-16 2.000" ARP623-2000 ARP613-2000
3/8"-16 2.250" ARP623-2250 ARP613-2250
Wheel Studs 3/8"-16 2.500" ARP623-2500 ARP613-2500
Need the extra 3/8"-16 2.750" ARP623-2750 ARP613-2750
strength of ARP’s 3/8"-16 3.000" ARP623-3000 ARP613-3000
heat-treated, 8740 chrome moly wheel studs? With a tensile 3/8"-16 3.250" — ARP613-3250
3/8"-16 3.500" ARP623-3500 ARP613-3500
strength of 200,000 PSI, these studs will easily handle
3/8"-16 4.000" — ARP613-4000
the acceleration shock loads (shear) and lateral forces
7/16"-14 1.500" — ARP614-1500
(elongation). Sold in 4 or 5-packs, studs are cadmium plated
for extra protection. Available for GM, Ford, Chrysler, and
Honda as well as aftermarket replacement axles. Nuts not
included.
A L2 Thread
Application Knurl Knurl Part No.
Size
Dia. Length
Chrysler
Chrysler Rear .680" .400" 1/2-20" ARP100-7705
Ford
Ford, Rear Disc Brakes/
.625" .400" 1/2-20" ARP100-7703
Chrysler Front
Ford,
.618" 1.000" 1/2-20" ARP100-7707
Front Disc Brakes Early
Mustang II Front .554" .390" 1/2-20" ARP100-7714
GM
Late GM Drum Brake .486" .420" 7/16-20" ARP100-7701

2023 - 2024 HOT ROD AND EARLY MUSCLE 81

Torq-Thrust Original (RWD)
A one-piece, machined alloy wheel
Torq-Thrust II (RWD)
with a light texture, painted center, The one-piece alloy, polished wheel
and a machined lip - not clear includes center cap.
coated. Center cap included. Part No. Backspacing Size Bolt Circle
AMRVN5155661 3-3/8" 15 x 6 5x4-3/4"
Part No. Backspacing Size Bolt Circle AMRVN5155665 3-3/8" 15 x 6 5x4-1/2"
AMRVN3095761 3-3/4" 15 x 7 5"x 4-3/4"
AMRVN5155761 3-3/4" 15 x 7 5x4-3/4"
AMRVN5155765 3-3/4" 15 x 7 5x4-1/2"
AMRVN5155861 3-3/4" 15 x 8 5x4-3/4"
AMRVN5155865 3-3/4" 15 x 8 5x4-1/2"
AMRVN5155866 4-1/2" 15 x 8 5x4-1/2"
Torq-Thrust “D” (RWD) AMRVN5157761 4" 17 x 7 5x4-3/4"
A one-piece, machined alloy wheel AMRVN5157765 4" 17 x 7 5x4-1/2"
AMRVN5157861 4" 17 x 8 5x4-3/4"
with a magnesium colored, gray
AMRVN5157865 4" 17 x 8 5x4-1/2"
center, and a machined lip - not
clear coated. Center cap included.
Part No. Backspacing Size Bolt Circle
AMRVN1055661 3-5/8" 15 x 6 5x4-3/4"
AMRVN1055665 3-5/8" 15 x 6 5x4-1/2"
AMRVN1055765 3-3/4" 15 x 7 5x4-1/2" VN501 - 500 Magnum Wheel
Cast aluminum wheel with gloss
black machined center surfaces.
Includes center cap.
Torq-Thrust M Gloss Black Part No. Backspacing Size Bolt
Pattern
These one-piece alloy American
AMRVN50158012500 4.5" 15 x 8 5x4-1/2"
Racing Torq-Thrust M wheels
are available in black finish with
machined lip and feature the
same 5-spoke design as the Torq-
Thrust wheels.
Part No. Backspacing Size Bolt Circle
Chrome Torq-Thrust
AMRAR105M8861B 4-1/2" 18 x 8 5x4-3/4" “D” (RWD)
The Torq-Thrust “D”, with a
lustrous chrome-plated finish.
Center cap included.
Part No. Backspacing Size Bolt Circle
AMRVN6055761 3-3/4" 15 x 7 5x4-3/4"
AMRVN6055765 3-3/4" 15 x 7 5x4-1/2"

InVision HD Digital Dash Kits

AutoMeter's sleek line of InVision HD digital dash display is like
today's LCD vehicle instrument displays, but built for yesterday's
classic trucks and muscle cars. This complete dash system
comes equipped and ready to monitor the most important vitals:
speedometer, tachometer, oil pressure, water temperature, fuel
level, and voltmeter. All instruments are displayed on a 12.3" high-
definition color LCD screen. Includes pre-terminated, color-coded
universal wiring harness, sensors, adapters, and a panel-mounted
joystick for programming.
Part Number Application Description
ATM7000 Universal Dash Panel with 12.3" LCD Screen, Harness, Sensors, Kit
ATM7005 GM G-Body 1982-87 Dash Panel with 12.3" LCD Screen, Harness, Sensors, Kit
ATM7007 Ford Mustang 1987-93 Dash Panel with 12.3" LCD Screen, Harness, Sensors, Kit
ATM7008 GM F-Body 1969 Dash Panel with 12.3" LCD Screen, Harness, Sensors, Kit

82 2023 - 2024 HOT ROD AND EARLY MUSCLE

Direct Fit Dash Panels
Direct Fit dash panels offer the convenience of factory fit and finish for a variety of applications. Made in the USA from
thermoformed UV-resistant black ABS plastic, they take the hassle and guesswork out updating an original dash with
Autometer gauges. Sold each.

Part Number Application Description

ATM2114 Mercury Cougar 1967-68 Four 2-1/16" Holes, Two 3-3/8" Holes, without Air Conditioning
ATM2119 Mopar A-Body 1967-69 Four 2-1/16" Holes, Two 3-3/8" Holes, without Air Conditioning
ATM2120 Mopar A-Body 1967-69 Four 2-1/16" Holes, Two 3-3/8" Holes, with Air Conditioning
ATM2900 Ford Compact Truck 1967-72 Four 2-1/16" Holes, One 3-3/8" Hole
ATM2901 GM A-Body 1968 Four 2-1/16" Holes, Two 3-3/8" Holes, No Vents
ATM2902 GM A-Body 1968 Four 2-1/16" Holes, Two 3-3/8" Holes, with Vents
ATM2903 GM A-Body 1968 Four 2-1/16" Holes, Two 5" Holes, No Vents
ATM2904 GM A-Body 1968 Four 2-1/16" Holes, Two 5" Holes, with Vents
ATM2905 GM X-Body 1968 Four 2-1/16" Holes, Two 3-3/8" Holes
ATM2906 Pontiac GTO/LeMans 1968 Four 2-1/16" Holes, Two 3-3/8" Holes
ATM2907 Mopar B-Body 1968-70 Four 2-1/16" Holes, Two 3-3/8" Holes
ATM2908 GM A-Body 1969 Four 2-1/16" Holes, Two 3-3/8" Holes, No Vents
ATM2909 GM A-Body 1969 Four 2-1/16" Holes, Two 3-3/8" Holes, with Vents
ATM2910 GM A-Body 1969 Four 2-1/16" Holes, Two 5" Holes, No Vents
ATM2911 GM A-Body 1969 Four 2-1/16" Holes, Two 5" Holes, with Vents
ATM2912 GM F-Body 1969 Four 2-1/16" Holes, Two 3-3/8" Holes
ATM2913 Mercury Cougar 1969-70 Four 2-1/16" Holes, Two 3-3/8" Holes
ATM2914 Pontiac GTO 1970-72 Four 2-1/16" Holes, Two 3-3/8" Holes, without Air Conditioning
ATM2915 Pontiac GTO 1970-72 Four 2-1/16" Holes, Two 3-3/8" Holes, with Air Conditioning
ATM2916 GM X-Body 1977-79 Four 2-1/16" Holes, Two 3-3/8" Holes
ATM2917 Ford Mustang 1979-86 Four 2-1/16" Holes, Two 3-3/8" Holes
ATM2918 Ford Full-Size Truck 1980-86 Four 2-1/16" Holes, Two 3-3/8" Holes, without Air Conditioning
ATM2919 Ford Full-Size Truck 1980-86 Four 2-1/16" Holes, Two 3-3/8" Holes, with Air Conditioning
ATM2920 GM F-Body 1982-84 Four 2-1/16" Holes, Two 5" Holes
ATM2921 GM F-Body 1982-89 Four 2-1/16" Holes, Two 3-3/8" Holes
ATM2922 GM Full-Size Truck 1984-87 Four 2-1/16" Holes, Two 5" Holes, No Vents
ATM2923 GM Full-Size Truck 1984-87 Four 2-1/16" Holes, Two 5" Holes, with Vents
ATM2924 Ford Mustang 1987-89 Four 2-1/16" Holes, Two 3-3/8" Holes
ATM2925 GM Fullsize Truck 1988-94 Four 2-1/16" Holes, Two 3-3/8" Holes, with Vents
ATM2926 GM F-Body 1990-92 Four 2-1/16" Holes, Two 5" Holes
ATM2927 Ford Mustang 1990-93 Four 2-1/16" Holes, Two 3-3/8" Holes
ATM2929 GM A-Body 1964-65 Four 2-1/16" Holes, Two 3-3/8" Holes

ATM2114

ATM2903

ATM2907

ATM2914

2023 - 2024 HOT ROD AND EARLY MUSCLE 83

Auto Meter Street Rod Gauge Kits Wide Band Air/Fuel Monitor
Auto Meter’s Street Rod Gauge Kits are the perfect Accurately monitor EFI and carbureted
addition to any hot rod interior. Five-gauge kits include system air/fuel ratios to prevent engine
all of the senders (except electronic speedometer damage from detonation and lean out
sender) and are ready to install. Kits include 120 MPH conditions. Monitor is adjustable for
speedometer, 0-100 PSI oil pressure gauge, 100-250°F alternate fuels including ethanol, methanol, ATM5778
water temperature gauge, 8-18V voltmeter, and 240/33- propane, and compressed natural gas. Auto-Dim
OHM fuel level gauge, senders, and mounting hardware. Mode automatically adjusts display brightness based on
All gauges have domed lenses for a nostalgic touch. Kits cockpit light levels. Size: 2-1/16"
with electronic speedometers may require purchase of Part No. Description
sender if car does not already have one. ATM3579 Sport Comp Analog
ATM4479 Ultra-Lite Analog
ATM5778 Phantom
Old Tyme White
Bright, white-faced
gauges are easy to
read and look great,
too. Chrome bezels enhance the black pointers and
Billet Dash Panels
numerals. These direct fit billet dash panels and billet dash inserts
allow installation of after market gauges into the stock
Part No. Description
5-Piece Kit, Mechanical Speedometer, Electrical Oil Pressure,
vehicle dash. Gauges are not included.
ATM1601
Water Temp, Volt, Fuel Level
5-Piece Kit, Electrical Speedometer and Oil Pressure,
ATM1602
Water Temp, Volt, Fuel Level ATM7043
ATM1695 3-1/8" Tachometer, 7,000 RPM
Part No. Description
Arctic White ATM7043 1964-66 Chevy Truck, 6 Gauge
With modern ATM7048 1953-55 Ford Truck, 6 Gauge
graphics, red
pointers, and chrome bezels, Arctic White gauges are Billet Dash Inserts
sure to brighten up any gauge panel. Red and green light ATM7039
bulb covers are included for a custom night driving look.
For 1947-53 Chevy truck,polished
Part No. Description aluminum gauge mounting are 5" I.D.
5-Piece Kit, Mechanical Speedometer, Electrical Oil Pressure,
ATM1300 Sold as pair.
Water Temp, Volt, Fuel Level
5-Piece Kit, Electrical Speedometer and Oil Pressure,
ATM1302
Water Temp, Volt, and Fuel Level Tach Pod and Dash Pod
ATM1397 2-1/16" Tachometer, 7,000 RPM
ATM1398 3-1/8" Tachometer, 7,000 RPM ATM49102
Fits 1987-93
Mustangs and is
Programmable Electronic designed to hold
all Auto Meter
Speedometer Senders 5" Tachs with a
Adjust speedometer accuracy, 3-3/8" case. It can be used with the shift light. The dash
regardless of tire size or rear pod replaces the stock clock and fits later models without
end ratio used. For use with clocks.
all Auto Meter electronic
speedometers. Senders are 16
pulse-per-reduction and include
Ford Mustang
pass-through drive for cruise control. Auto Meter Gauge Works™ now
offers a variety of mounting options
Part No. Description
for 1979 to 1993 Ford Mustangs.
ATM5291 7/8"-18 Thread, Hall Effect Sender
ATM5292 Ford Plug-In, Hall Effect Sender
Custom designed for each model, the
mounting accessories provide easy
viewing of the gauges and have a
Light Bulb Covers factory-installed appearance.
Change gauge lighting color with
slip-on light covers. Kits contain
three covers. Gauge Pods
ATM10100
Part No. Color
Gauge pods easily attach to the
ATM3207 Blue A-pillar, providing a clear, quick view
ATM3214 Red of the gauges and the road.
ATM3215 Green Part No. Description
ATM10100 1979-93 2-1/16", Dual Pod
ATM10101 1979-93 2-1/16", Single Pod
ATM10103 1979-93 2-5/8", Dual Pod

84 2023 - 2024 HOT ROD AND EARLY MUSCLE

1987-93 Ford Mustang Gauge Pods
2-5/8" Triple Gauge Cages and Pillar Pods
ATM50100 Single Dual Pods
Car Model Pods
Gauge cages replace the stock 2-1/16" 2-1/16"
vents in 1987-93 Mustangs without Domestic
altering the factory dash. The gauge cage with vents Chevelle, GTO, LeMans 1968-72 — ATM10183 ATM10191
directs airflow around the gauges. Cages accept 2-5/8" Chevy Corvette 1984-96 ATM10191 ATM10190
gauges for a race-inspired look. Grand Prix, Cutlass, Monte Carlo
— ATM10402
1978-87

Chevy Console Pod

Add Auto Meter Gauges to 1968-69
GPS Electric Speedo Interface Module
Camaro and 1968-74 Chevy Nova. ATM5289
The four gauge console pod easily Turns most aftermarket
attaches to the factory shifter electronic speedometers into a
console without having to alter GPS speedo with the push of a
the factory dash. All four 2-1/16" button. Features plug-and-play
gauges (sold separately) are angled toward the functionality, one-touch button
driver. calibration, a lightning fast 10-
Part No. Description Hz sample rate calibration, and
ATM10002 1968-69 Camaro Factory Console Pod a fully sealed module with antenna base seals to keep out
ATM10002 1968-74 Nova Factory Console Pod water and dust.

Auto Meter offers instrumentation for every need... and budget. Call for more information.

Perimeter User Selectable Seven

Incandescent Color LED through Glow in the Dark
the Dial

Perimeter Perimeter
Green LED Full Dial Incandescent Incandescent

Perimeter
Incandescent Green LED through
Blue LED Full Dial
the Dial

Blue LED through

the Dial Perimeter
Red LED through the
Incandescent
Dial

White LED through

Perimeter AMERICAN MUSCLE TM
the Dial
Incandescent White LED Full Dial

White LED through MCX TM

the Dial White LED Full Dial
Perimeter
Incandescent
White LED through CRUISER M
the Dial White LED through
Perimeter
Incandescent the Dial

2023 - 2024 HOT ROD AND EARLY MUSCLE 85

Light-Duty Shaved Door Handle Kit Universal
AULAUTSVPRO2 Power Window Kits
15-pound solenoids and AULAUTPW4650
eight-channel remotes Convert manual windows
that are perfect for to power operation. The
late model original heavy-duty motors connect
equipment latches, or to existing factory window
bear claw latches in crank shafts and exceed
hot rods. factory standards. Both
standard and deluxe kits are available for two-door
Medium-Duty Shaved vehicles. Deluxe kits include switches, switch frames
and mounting cases. Each kit can be upgraded to keyless
Door Handle Kits entry. Kits include instructions and are backed by a
AULAUTSVPRO3 limited lifetime warranty.
Medium-duty kits include
remote, 35-pound One-Touch Windows
solenoids, relays, wire
and hardware.
AULAUTWC1000
One-Touch window operation can now
be an option on any car. Just a single
5-Channel Keyless touch lowers window all the way and
Entry Systems another touch raises it up again.
AULAUTKL550
Locking doors, opening Universal Electric Window Switch
trunk or hood, turning AULAUTEWSU
on headlights, neon Builders of resto-rods will like the
lights, dome lights, look of these switches which closely
activating alarms, resemble regular inside cranks.
operating stereo, engaging remote starter... AutoLoc’s Self-contained switches require only
systems can do it all, and each is backed by a limited 15° of handle movement to operate
lifetime warranty. and are very thin as well. Internally
located positive stops prevent over-
rotating. Aluminum with stainless
2-Door Power Lock Kit fasteners, units are made in the USA.
with Remote Handles not included. Use with factory handles. Sold
individually. Includes five shafts to fit all window cranks.
AULAUTCK2000
Each kit contains everything Power Window Crank Switch for 1960-87 GM
for installation, including
power actuators, wiring, Full-Size Trucks
and hardware. AULAUT9D6AB2
Designed to closely resemble regular inside crank, these
self-contained switches require only
15° of handle movement to operate.
Flat Glass The super-thin modules include
Power Window Kits internally located positive stops to
Power windows up and down prevent over-rotating. Aluminum
with a kit that relies upon a with stainless fasteners, units
smooth operating, stock-type are made in the USA. Handles not
motor with a limited lifetime included. Use with factory handles.
warranty. The high-tech motors Sold as a pair.
drive cables to raise and lower
windows with adjustable bases Billet Door Loom
in reinforced guide tracks. AULAUTDL00MBL
Part No. Description When power windows, shaved door
Standard 2-Door Power Window Kit
AULAUTPW5500 handles, and stereo speakers are
without Switches
AULAUTPW55033 Deluxe 2-Door Power Window Kit with Switches
added, the result is a ton of unsightly
wiring running through the door jambs.
Hide those wires with a 12" billet
aluminum and braided stainless door
loom. Sold in pairs.

86 2023 - 2024 HOT ROD AND EARLY MUSCLE

Suicide 2-Door Hinge System Power Bear Claw Latch
Universal steel hinge kit for Systems
two-door applications. Allows AULAUTBCLGP
up 90° of backward opening
Bolt-in kits will pop both doors
motion. Includes recessed door
open with the push of a button.
pockets, extra bracing, mounting
Kit includes two 13-pound
hard-ware,detailed instructions,
actuators, two Bear Claw
universal sizing, and can be cut
latches and heavy-duty mounting brackets. Latches
and welded to the needed size.
power up with only two wires. Limited lifetime warranty.
Part No. Description
Includes AutoLoc Deadloc Automatic Door Safety Bear Claw Pulley Kit
AULAUTHDHINSK2
System AULAUTSVPULY
AULAUTSDS1 Includes Manual Door Safety System
AULAUTBCLG Large Jaw Bear Claw Latches, Pair
AutoLoc’s latch pulley kit is perfect
AULAUTBCLGKT Large Jaw Bear Claw Latches w/Install Kit, Pair
for difficult latch systems and shaved
door kits. Kit contains everything
necessary to release the door
Manual “Suicide” Door Safety Pins latch, including hardware and Allen
AULAUTDL1000 wrenches.
Safety pins are a very wise addition
to any vehicle with front-opening, Hood/Trunk Latch Kits
rear-hinged doors. A 1/4" diameter Durable and reliable, hood and trunk
stainless steel rod extends into latch kits provide peace of mind by
the door jamb to insure that the keeping hood or trunk secure.
door will not open unexpectedly. Part No. Description
Electric unit can be wired to operate when the ignition
AULAUTBCTR Spring-Type Kit
is turned on, or via a remote to lock the vehicle when
AULAUTBCTR2 Pin-Type Kit
occupants are away. Made of aluminum and stainless
steel in the USA.
AULAUTBCTR

Door Popper
AULAUTD3000 Adustable Cable Clamp
Choose from three styles of door poppers. AULAUTADJCBL
Billet aluminum poppers have a nylon tip. Zinc oxide-plated steel cable clamp
Sold each. with 1/4" adjusting nut.

Bear Claw Latches

Dependable, three-stage
latching system is now Chrome Latch & Cable
available in a larger size
for heavier doors. Lever- AULAUTARM1
action triggers assure Universal chrome-plated steel latch
reliable latching action with 96" long cable.
time after time. The dual
claws firmly grip the extra
strong striker bolt. May AULAUTBCLGKT
be locked and unlocked. Includes two latches and two
striker bolts. Also available with installation kit. Daytona Toggle Switch
Part No. Description AULAUTBBA23
AULAUTBCSM Small Jaw Bear Claw Latches, Pair
AULAUTBCSMKT Small Jaw Bear Claw Latches w/Install Kit, Pair
A 2" x 2" billet aluminum oval
AULAUTBCLG Large Jaw Bear Claw Latches, Pair switch panel with two momentary
AULAUTBCLGKT Large Jaw Bear Claw Latches w/Install Kit, Pair toggle switches and indicator
lights.

Billet LED Interior

Dome Light
AULAUTBWDLBK
Universal billet aluminum
interior dome light.

2023 - 2024 HOT ROD AND EARLY MUSCLE 87

Heavy-Duty Solenoids Flat Glass Power Window
Single-wire, self-grounding
solenoids are great for older
Conversion Kits
latches and high-use items. AULAUTPWWC00
The SL35 delivers a steady This universal kit includes
35 pounds and the SL50 is everything needed to convert
easily adjustable from 50 to 105 pounds of pulling power. flat windows from manual to
Both include wiring, cable, cable guide, self-grounding power operation. Two window
bracket, heavy-duty backup button, and required regulators, billet crank switches,
hardware. Limited lifetime warranty. adjustable tracks, and electronic
Part No. Description processors are all included.
AULAUTSL35 AutoLoc 35-Pound Solenoid
AULAUTSL50 AutoLoc 50- to 105-Pound Adjustable Solenoid
100-Pound Shaved Door Pop Handle/Latch
Power Trunk/Hatch Release Kit Popper Kit
AULAUTPT1500 AULAUTSL100
Kit uses a 15-pound solenoid, is This military-grade power
easily installed, and will convert solenoid, rated up to 100 pounds,
any manually released trunk, will pop open the toughest of
hatch, or rear glass to doors, hoods, and trucks with
power operation. Works a push of a button. Manually or
with aftermarket alarms remotely activated for door pop
for remote operation. or shave door operation.
Includes wiring, hardware,
and instructions. Limited
lifetime warranty. SV-Pro Series Shaved Door Handle Kits
Billet Dome/Courtesy Light AULAUTSVPRO34
This kit opens vehicle
AULAUTBWDL doors via a switch or
Billet aluminum courtesy light gives a remote key fob. The
any interior a touch of elegance and full door opening solenoid
functionality. Sold individually. is adjustable from 35
to 50 pounds. Includes
Radio Antennas two sole-noids,
two key fobs, and
Part No. Description
Hidden Radio Antenna,
everything necessary
AULAUTHAB Mounts under Headliner for a clean installation.
for a Clean Look
AULAUTPAC
Chrome External Power
Antenna
16mm Billet Latching Button
AULAUTPAC
AULAUTSW39R
7" Snake Eye Headlight The ideal push button for
activating any vehicle
AULAUTLENA1AS accessory as well as an engine
Replace the sealed beam headlights start. The 16mm diameter
used in many cars and trucks. billet aluminum switch uses a
Replaceable bulbs give the best red LED light ring to indicate
visibility. Exclusive Omni-View when button is on.
technology provides maximum light
output. Sold individually. Bulb is not
included. 12mm Domed Billet
Momentary Button
7" Tri-Bar Headlight AULAUTSW45
AULAUTLENB1AS This 12mm diameter billet aluminum
Tri-Bar headlights feature the momentary switch offers a positive
highest quality bulbs available tactile feel.
for long-lasting performance and
Omni-View technology provides Universal Tilt Hood Kit
maximum light output. Includes AULAUTTILTHD
detailed instructions and color dots Offers a custom reverse tilt to a
(five different colors). Also available vehicle's hood. The steel frame
with built-in turn signals. Sold and brackets along with all the
individually. Bulb is not included. necessary hardware makes easy
work of the installation.

88 2023 - 2024 HOT ROD AND EARLY MUSCLE

Bullet Wiper Caps Tri-Bar 5-3/4" H4
AULAUTWC1 Headlight for 1958-82
This pair of chromed Chevy Corvette
aluminum bullet-shaped
wiper caps adds that custom AULAUTDC1FA
look to any muscle car or hot Tri-bar headlight with colored
rod. Includes set screws and dots measures 5-3/4" O.D.
installation tool. Includes H4 bulb, harness,
and glass lens assembly. For
1958-82 Corvette. Sold in set
of 4.

Heavy-Duty Power Billet LED 3rd Brake Light

Windshield Wiper Kit AULAUTLED3B1
AULAUTWIPER2 Universal third brake light
This universal kit replaces features a billet aluminum
old, outdated factory wiper housing with 12 red LED
systems with a heavy-duty lights. 7.25"W x 0.50"H.
two-speed setup that will
stand up to whatever mother Black Billet Aluminum GM LS Engine Dipstick
nature has to offer. Each
kit features easy-to-install AULAUTEDB5
plug-in harnesses and is Block-mounted black
backed by a limited lifetime anodized billet aluminum
warranty. engine oil dipstick.

Snake Eye Headlight Heated Seat Kit

Conversion Kit AULAUTHR2000
Replace the 7-inch sealed Manufactured from
beam head-lights with carbon fiber, this kit
these retro Snake Eye offers a lightweight,
headlights fitted with H4 thin, and durable
bulbs. Exclusive Omni- electric heat pad that
View technology provides mounts between the
maximum light output. Sold seat padding and the
individually. seat cover material.
Includes a toggle
Part No. Description
switch and plug to
AULAUTLENA1ABS Headlight adapt to vehicle
AULAUTLENA2AS Headlight with Clear Turn Signal electrical system. Sold
AULAUTLENA3AS Headlight with Amber Turn Signal each.

Bear Claw Trunk/

Hood Latch Kit
Universal Car Cover AULAUTLATCHK
The kit includes the
AULAUTPCC01 Bear Claw release
Universal plastic vinyl car lever, plated steel
cover. latch, as well as the
release cable and
housing.

2023 - 2024 HOT ROD AND EARLY MUSCLE 89

Autolite Spark Plugs
Autolite has provided both original equipment manufacturers and the performance aftermarket with the highest
quality ignition products. Autolite has the right ignition products, regardless of vehicle make or model.
Call for applications.

Tech Tip

• Determine the thread diameter, length (reach), and whether tapered or gasket (flat) seat.
• Select gap style.
• Select heat range.
• Adjust fuel mixture and spark advance timing for maximum performance. Spark Plug Diagnosis Pictures Courtesy Of Autolite
• Inspect plugs and pistons for evidence of detonation, abnormal combustion or
excessive temperatures.
• Stay with the same plug type after final heat range selection unless major
modifications have been made (increasing the horsepower or operating range).
Normal Fuel Fouled Detonation Oil Fouled
Spark Plug Heat Range Tech
A spark plug’s Heat Range, defined as the measure of how fast the tip of the plug dissipates combustion heat, can range
from as low as 500°F to as high as 2,500°F. Manufacturers offer plugs in many heat ranges, from cold through medium hot, to
very hot. It is imperative that the plug stay cool enough to prevent pre-ignition or electrode destruction, and still remain hot
enough to burn off combustion deposits that form at the firing tip. A plug that is excessively cold or hot for the application in
question will eventually cause the engine to misfire. When working with an engine that is stock or mildly modified, it is often
best to use the plug recommended by the car manufacturer. However, if the compression ratio has been altered, a different
heat range plug may be required. Many racers rely upon their engine builder for plug heat range recommendations. If a racer
is unsure of the correct heat range to use, it is always recommended to “stay on the safe side” and use a colder plug. A switch
in heat range can change the temperature of the spark plug tip by 70-120°F. If the plug selected is too cold, it will eventually
foul and misfire, but it will not damage the engine. A plug which is too hot can cause pre-ignition and detonation, often
resulting in a severely damaged engine.

1986-93 5.0L Mustang Mustang 5.0 Liter

Chrome Cold Air BBK1501
Induction System 70mm, throttle body fits all
1986-93 Ford 5.0 liter EFI
BBK1557 applications. 50-state EPA
One of today’s favorite legal. Complete with gaskets
performance bolt-ons, cold air and TPS sensor.
induction systems deliver real
world horsepower gains and great looks.
1990-2004 4.6L Ford Models
Adds 8-15 horsepower and crisper throttle response.
1986-93 Mustang V8 Mass Air Meters Standard on Roush Stage 3 Mustang. Available in 70mm
Starting with a new aluminum casting, and 75mm.
BBK CNC machines and powder coats it Part No. Description
to exacting specifications and then fits 70mm For 4.6L 2-V,
it with a new, electronically calibrated BBK1700
Fits all 1996-04, 4.6L 2-V
mass air sensor module to ensure 75mm for 4.6L 2-V,
BBK1701
precise air/fuel ratio. Gains of up to Fits all 1996-04, 4.6L 2-V
15 rear wheel horsepower have been BBK1703
75mm for 4.6L 2-V,
Fits all 1990-95, 4.6L 2-V
registered in dyno testing. In addition
to use on Mustangs, the meter may also
be beneficial for those retrofitting an EFI engine into an 1997-2003 GM LS1
early muscle car or hot rod. Uses stock cable or wire throttle control. Bolt on 7-10
Part No. Description
horsepower in minutes. 80mm.
BBK8003 76mm 24 lb. - Factory Air Box, 1986-93 Mustang Part No. Description
BBK8004 76mm 24 lb. - Cold Air Calibration, 1986-93 Mustang 80mm LS1 Performance Throttle
BBK1708
BBK8005 76mm 30 lb. - Cold Air Calibration, 1986-93 Mustang Body for 1997-2004
80mm LS1 Performance Throttle
BBK1709 Body for 1998-2003 LS1, with Cable
Style Throttle

90 2023 - 2024 HOT ROD AND EARLY MUSCLE

GM Tuned-Port and LT-1 1-5/8" Street and Strip
Performance Headers
BBK1516
Fits current tuned-port 305/350 and Add 15 to 20 HP and more
LT-1 applications. Direct bolt-on and legal in 50 states. low-end torque. Full-length
headers fit 1979-93 5.0/5.8L
Part No. Description
BBK1543 1994-97 Camaro/Firebird Twin 52mm, LT-1
Mustangs and include gaskets,
BBK1544 1994-97 Camaro/FirebirdTwin 58mm, LT-1 bolts, and screw-in studs.
1989-92 Camaro and Firebird Twin 52mm, TPI Chrome.
BBK1537
1989-91 Corvette Twin 52mm, TPI
X-Pipes
4.6L Ford High-Flow Built from fully aluminized CNC
Throttle Intake mandrel-bent tubing, die-
stamped flanges and unique
BBK1780 die-stamped X-chamber,
Add 10-15 horsepower! High- pipes deliver unmatched sound and
flow 78mm intake elbow can be performance. Full-length X-pipes are designed to bolt
installed on any ’96-04 4.6L in 30 minutes or less. Gaskets on to factory header or shortie headers. Short pipes are
and hardware are included. used with full-length headers. 2-1/2" diameter. Not for
sale in California.
Mustang Exhaust Part No. Description
Short X And H Pipes
1979-93 Mustang 5.0L,
1-5/8" Equal-Length BBK1509
Short Mid H-Pipe, MT Only, with Converters
Shorty Headers for BBK1659 1979-93 Mustang 5.0L, Short Mid X-Pipe, with Converters

1986-93 Mustang, 5.0L 1-5/8” Shorty Headers

BBK1512 for Chevy Impala SS
Equal length chrome headers Designed to fit the 1993-
are mandrel bent from heavy-gauge tubing. 96 Chevy Impala SS, BBK
shorty headers offer
1-5/8" Shorty Headers bolt-on performance with
For 1986-93 Mustang 5.0L. an existing stock exhaust.
Headers are mandrel-bent Made with 1-5/8” mandrel-
heavy gauge tubing. bent tubing for unrestricted
Part No. Description airflow, with a one-piece
BBK1515 Chrome laser-cut 3/8” flange for added strength and durability.
BBK15150 Polished Ceramic Gaskets and hardware included.
Part No. Description
1979-93 351W Swap BBK1595 Chrome
BBK15950 Ceramic
BBK15690
Full-length headers will
bolt on as a direct fit to High-Volume
any 351W swap project. Fits OEM-Style
manual transmission and C4/
C6 automatic transmission,
Electric Fuel Pump Kit
except AOD. 1-3/4" diameter. BBK1607
Part No. Description 1986-93 Mustang V8, 255 LPH
BBK1569 1-3/4" Full Length Hedders, Chrome fuel pump kit. A must for turbo
BBK15690 1-3/4" Full Length Hedders, Silver Ceramic and nitrous models. Kit includes
BBK1509 2-1/2" Hi-Flow Short Mid H-Pipe With Converters a new strainer assembly. Easy to
BBK1659 2--1/2" Hi-Flow Short Mid X-Pipe With Converters install.

Adjustable Fuel Regulators High-Performance

BBK1706 Underdrive Pulley Systems
Regulators fit 1986-93 Ford Mustang
5.0L V8 engines and are made of billet BBK1553
aluminum with a long-life blue anodized Bolt-on 10-15 horsepower in under 30
finish. Precision diaphragm design minutes. Computer-machined
allows full adjustment. aluminum alloy systems deliver
full charging. Kit is 3-piece
and fits 1979-93 5.0 Mustang/
Capri 5.0L.

2023 - 2024 HOT ROD AND EARLY MUSCLE 91

 Adjustable Caster/Camber
Heavy-Duty Adjustable Cable Plate Package
and Quadrant Kits BBK2525
Kits are available with an adjustable Billet aluminum
fenderwell unit. Precisely adjust main body
clutch to eliminate sticky shifts and is precision
hard-to-find reverse gear. machined to
exact tolerances.
Part No. Description Package is
BBK1505 1979-95 Mustang GT and Cobra with 5-Speed lightweight, compact,
BBK15050 1979-04 Clutch Fenderwell Adjuster easy to install, and easy to
BBK15055 1979-95 Mustang with Fenderwell Adjuster adjust. Fits 1979-93 Mustangs.

Lowering Springs Lower Springs for 1964-72 A-Body

for 1967-69 F-Body BMR springs
are specifically
BMRSP055R designed to
Increase the cornering capabilities provide optimal
of your car dramatically by handling without
increasing the spring rate and sacrificing ride
lowering the center of gravity. BMR quality. The
springs lower the car, yet retain the front springs
OE ride quality. Front, 2" drop. Small block. Red. are progressive
wound to provide BMRSP013R
Lowering Springs variable rates. The soft portion of the progressive
for 1978-87 G-Body winding maintains near OE ride quality during normal
driving conditions. When the suspension is loaded during
BMRSP035R aggressive cornering, the springs enter into the stiffer
Increasing the portion of the spring. Additional spring rate has been
cornering capabilities designed into this portion of the spring for better control
of your car dramatically and reduced body roll. All springs are red.
by increasing the Part No. Description
spring rate and lowering the center of gravity. BMR BMRSP013R Front, 1" Drop, 1964-72
springs lower the car while retaining the OE ride quality. BMRSP014R Rear, 1" Drop, 1964-72
Comes with a set of 4 with 1-1/2" drop. Red. BMRSP015R Rear, 2" Drop, 1964-72
BMRSP031R Set Of 4, 2" Drop, 1967-72
BMRSP033R Set Of 4, 2" Drop, 1964-66
Lowering Springs BMRSP034R Front, 2" Drop, 1964-72
for 1979-93 Mustang
BMRSP027R Torque Arms for 1982-92 F-Body
BMR springs are cold Replace your weak, flexible stamped steel
wound from high- torque arm with a BMR tubular version
tensile chrome-silicon and put that power where it
to provide the longest is supposed to be -
lasting, most consistent the pavement!
rate possible. Front springs are linear rate with a 1" drop Bolts directly in
BMRTA002R
and 525 lbs/in. while the rear springs provide a 1" drop and place of factory
235 lbs/in linear rate. Set of 4 with 1" drop. Red. torque arm
using all factory mounting locations. Requires no
welding or drilling and clears all factory or aftermarket
exhausts. Both versions come with a new, low-deflection
polyurethane front mounting bushing.
Part No. Description
BMRTA001R DOM, Adjustable, Bolt-in, Red
BMRTA002R DOM, Non-Adjustable, Bolt-in, Red

92 2023 - 2024 HOT ROD AND EARLY MUSCLE

Tubular Lower Subframe Connectors
Control Arms for 1967-69 F-Body
Engineered to reduce BMRSFC005H
weight, eliminate
Increases chassis rigidity
deflection and
by tying the front and rear
improve steering feel.
subframes together. The
Fabricated from 1-1/4"
bolt-in design installs by
x .095" wall DOM tubing
simply drilling holes, ship with BMR’s popular Delrin solid
with CNC-formed, laser-cut steel plates, control arms
front subframe mounts. Black.
are fitted with ball joints and polyurethane bushings.
Adjustable units include a single rod end. Sold per pair,
with a black powder-coated or black hammertone finish. Lower Control Arms
Sold in pairs. For 1982-92 F-Body
Eliminate wheelhop and improve
Part No. Description traction with BMR’s lower control
BMRAA034H
Non-Adjustable Tubular Lower Control Arm for arms. Comes with high-durometer
1979-93 Ford Mustang. Black Powder-Coated Finish. polyurethane bushings.
Adjustable Tubular Lower Control Arm for 1979-93
BMRAA035H Part No. Description
Ford Mustang. Black Hammertone Finish.
Adjustable Tubular Lower Control Arm for 1979-93 BMRTCA001H DOM, Non-Adjustable, Poly Bushings, Black
BMRAA037H BMRTCA001R DOM, Non-Adjustable, Poly Bushings, Red
Ford Mustang. Black Powder-Coated Finish.

Motor Mounts for Panhard Rods for

1982-92 GM F-Body 1982-92 F-Body
Heavy-duty The panhard rod is
polyurethane motor responsible for locating
mounts are designed the rear end side-to-
to directly replace the side in the chassis.
OEM oil-filled hydraulic Factory F-Body panhard
bushings, eliminating rods are made from
deflection and stamped-U-shaped
resulting in improved material and utilize soft, rubber bushings that allow
throttle and shifting deflection under load. BMR panhard rods are made from
performance. large diameter 1-1/4", heavy-wall DOM tubing and utilize
either greasable polyurethane bushings or HD spherical
Part No. Description bearings by Viking. The adjustable versions use left-hand
Engine Block and Frame Mounts for 1982-92 Camaro/ and right-hand thread to allow easy on-car adjustment.
BMRMM330H Firebird. Polyurethane/Steel. Black Powder-Coated CNC-machined adjusters are made from 4130 chrome-
Finish. Kit. moly and have rolled threads. All rod end spacers are 304
Upper Engine Block Mounts for 1982-92 Camaro/ stainless. The panhard relocation kit replaces the upper
BMRMM331H Firebird, Solid Steel w/ Black Powder-Coated Finish.
Sold as Pair.
panhard rod support and relocates the panhard rod,
1982-92 Camaro/Firebird, Frame Mount, Black Powder allowing room for up to dual 3" exhaust routing over the
BMRMM332H axle.
Coat Steel Bracket/Polyurethane Bushing, Sold as Pair
Part No. Description
Front Control Arm BMRPHR002R DOM, On-Car Adjustable. Polyrethane Bushings, Red
BMRPHR004H Relocation Kit, Black
Hardware Kits
Grade 8 steel, zinc-
oxide hardware kit Transmission Conversion Crossmembers
assures the ultimate BMRTBR001
in strength and long- These bolt-in
lasting looks for both crossmembers replace
upper and lower control the stock factory cross-
arms. Available for GM members allowing
F-Body, GM X-Body, and transmission conversions
GM A-Body vehicles. Fit both stock and BMR control arms. without modifying
Sold only as kit. Made in USA. the factory part and
possibly damaging the
Part No. Description transmission due to mis-
Front Upper and Lower Control Arm Hardware Kit for alignment. Black hammertone finish. Made in USA.
BMRRH006 1982-02 GM F-Body/1968-72 GM X-Body/1964-72 GM
A-Body
Part No. Description
Front Lower Control Arm Hardware Kit for 1982-92 GM
BMRRH010 Crossmember for TH350/PG/700R4/C4/C6/AOD/4L60E
F-Body/ 1978-87 GM G-Body. BMRTC730H
in 1979-93 Ford Mustang.
BMRTC731H Crossmember for TH400/T-56 in 1979-93 Ford Mustang.

2023 - 2024 HOT ROD AND EARLY MUSCLE 93

Torque Arm Adjustable Upper
Relocation Control Arm Kit
Crossmember for 1979-2004
for 1998-2002 Mustang
Camaro BMRUTCA041H
BMRTCC021R Reduce wheel hop and
Bolt-on tubular torque arm improve cornering consistency!
relocation crossmember provides added support and This upper control arm kit features a stiff, tubular
stiffness when swapping a4L80E transmission into an design and polyurethane bushings to eliminate the flex
LS1 equipped 1998-2002 Chevy Camaro. Manufactured and deflection common to stock control arms. Fully
from heavy-duty 1-1/4" DOM steel tubing with laser-cut, adjustable on-car to dial in the optimal pinion angle
CNC-formed 3/16" steel plate, with a red powder-coated for street or track. Manufactured from heavy-duty
finish. Made in USA. 1-1/4" DOM steel tubing with a CNC-cut chromoly center
adjuster for maximum strength and durability. Red
powder-coated finish. Made in USA.

Lowering System Components

Bell Tech’s lowering system components will improve the looks, stance, and handling
of any car. Bell Tech has kits available to lower just the rear so the car sits level, or full
front and rear kits. All Bell Tech kits include all hardware and complete instructions.
CALL FOR APPLICATIONS

Pro Stick Shifter Pro Ratchet Shifter

The Pro Stick offers Full ratchet-action shifter works
versatility and dependability. with standard or reverse-pattern
Interchangeable gate plates are valve bodies and includes neutral
included for 2-, 3-, or 4-speed safety switch, gear position
operation with the same shifter. indicator, and reverse lockout
Ideal for competition-style, that meets NHRA and IHRA
street/strip rods. Includes 5' red requirements. Includes 5' super-
race cable and brushed aluminum duty race cable and aluminum
cover. cover.
Part No. Description Part No. Description
BMM80706 Pro Stick For 3-Speed GM, Ford, and Chrysler BMM80840 Fits Powerglide
BMM80702 Pro Stick for Powerglide Only Fits GM 3-/4-Speed AT, Ford 3-/4-Speed AT, Chrysler
BMM80842*
Accessories 3-Speed AT
BMM70465 Powerglide Transmission Lever * Will fit Ford AOD with BMM40496 installation kit.
BMM80710 3-Speed Reverse Pattern Gate Plate
BMM80713 2-Speed Forward/Reverse Pattern Gate Plate and Cover
BMM80717 Brushed Aluminum Cover with Quick Release Pins

94 2023 - 2024 HOT ROD AND EARLY MUSCLE

Mustang Hammer ™
Console Hammer ™ The multi-position trigger provides
Fits the stock factory full comfort in various positions and
console for 1987-93 Mustangs the base can be trimmed for a
with the AOD and AODE custom fit. Cable operated for
transmission. Factory cables quick installation and accurate
are used so factory interlock shifting. The reverse lockout
mechanisms can be retained. meets NHRA and IHRA requirements
and includes cable, neutral safety
switch, backup light switch, lighted
Part No. Description gear indicator, and polished aluminum
BMM81002 1987-93 Mustang Console with AOD
BMM81020 Mustang Hammer C-4 Conversion Kit
“Hammer Head” handle.
Part No. Description
BMM80885 GM TH400, 350, 250, 200, 700-R4, 200-4R
Starshifter Ford C4, C6 and AOD
BMM80885
BMM80675 (AOD Requires BMM40496 Installation Kit)
A combination detent/ratchet- BMM80885 Chrysler 1966 and Later Torqueflite A727 and A904
style shifter. In the normal mode,
it’s a standard detent shifter. Shift Improver Kit
When the lever is in low, lift the Shift improver kit is inexpensive,
trigger all the way and pull the easy to install, and improves
stick back to convert to ratchet shift feel and quickness on any
action. Fits GM, Ford, and Chrysler stock automatic transmission.
3-Speed Automatics. Sluggish shifts, shift overlap,
and excessive wear on clutches
and bands due to slippage are
Quicksilver Shifter eliminated, and transmission life
is extended.
A top-of-the-line ratchet-action shifter, with
a reverse lockout (NHRA and IHRA Part No. Description
BMM20260 1965-87 Turbo-Hydro 400, 375, and M40
legal). It is cable operated and
BMM30262 1968-81 Turbo-Hydro 350 and M38
has universal floor mounting. BMM70239 1982-93 Turbo-Hydro 700-R4/4L60
Neutral safety and back-up BMM40262 1967-91 Ford C-6
light switches, lighted gear BMM50260 1967-69 Ford C-4
indicator, and chrome knob are BMM50262 1970-82 Ford C-4
all included. Compatible with reverse BMM10226 1966-70 Torqueflite A-727/A-904
pattern valve bodies. BMM10225 1971-77 Torqueflite A-727/A-904
Part No. Description
BMM80683*
Fits GM 3/4 Speed Auto, Ford 3-/4-Speed Auto, Converter
Chrysler 3-Speed Auto
Console Quicksilver Fits 1973-81 Camaro,
Lock-Up Control
BMM80688 Provides dash-
1970-81 Firebird, 3-/4-Speed Auto
BMM81025 Console Quicksilver Fits 1968-69 Camaro mounted control for
* Will fit Ford AOD with BMM40496 installation kit. governing converter
lockup at any speed
Megashifter between 30 and 90
mph. LED tells when
With its manual 4-speed look, the Megashifter is
converter is locked or
one of B&M’s most popular shifters. The
unlocked. For GM TH-
reverse lockout meets NHRA and IHRA
700/4L60, 200, 200-R4, and 350C.
requirements and even works
with reverse pattern valve Part No. Description
GM Auto Transmission
bodies. Universal floor-mount BMM70244
with Lockup Converter and Mech. Speedometer
base can be trimmed to fit GM Auto Transmission
any floor. Includes shifting BMM70248
with Lockup Converter and Elec. Speedometer
cable, neutral safety and back-
up light switches, lighted gear Trans Pan Drain Plug Kit
indicator, and polished aluminum
T-handle. BMM80250
Part No. Description
Install this non-magnetic drain plug in the
BMM80690 Fits Most GM, Ford, and Chrysler RWD 3-/4-Speed Auto transmission pan and minimize the fluid
Console MegaShifter change mess.
BMM80692
Fits 1982-92 Camaro/Firebird with 3-/4-Speed Auto
Console Megashifter Fits 1973-81 Camaro,
BMM80694
1970-81 Firebird with 3-/4-Speed Auto
BMM81035 Console Megashifter Fits 1968-69 Camaro

2023 - 2024 HOT ROD AND EARLY MUSCLE 95

Street Rod Torque Converters Transmission SuperCoolers
A powerful modern V8 engine Pressure tested to 200 PSI
in a lightweight street rod will with a low pressure drop, light
often cause an undesirable and efficient SuperCoolers
“clunk” when the transmission get the job done and always
is put in gear. A B&M Street assure that maximum
BMM70265
Rod Converter will soften the transmission cooling is
shock to driver and driveline provided.
without affecting driveability. Part No. Description
Converters offered in 2000, 2400, and 3000 stall speed. BMM70255 16,000 GVW, 11" x 5-3/4" x 3/4"
Tork Tork Tork BMM70268 19,000 GVW, 11" x 7-1/2" x 3/4"
Transmission Holeshot Holeshot BMM70264 24,000 GVW, 11" x 6" x 1-1/2"
Master Master Master
Application 2000 2400 2000 2400 3000 BMM70266 28,000 GVW, 11" x 8" x 1-1/2"
GM 15,000 GVW Polished with 1/2"NPT Fittings,
BMM20416 BMM20412 BMM20400 BMM20404 BMM20402 BMM70265
TH400,425,375 11" x 4-1/2" x 1-1/2"
GM TH350, 375B BMM20416 BMM20412 BMM20400 BMM20404 BMM20402 BMM80278 Mounting Kit, 4 Rods, 4 Slip-On Nuts, 4 Rubber Pads
GM 1984-91
— BMM70419 BMM70420 BMM70418 —
TH700-R4
Ford AOD — — BMM40437 BMM40438 — GM Throttle Valve/
Chrysler 727 BMM10415 — BMM10417 — — Kickdown Cables
Use these adjustable universal-fit cables
Extra Capacity Transmission Pans in place of stock cables.
Better cooling and built-in drain Part No. Description
plugs make these pans the perfect BMM30287 Universal GM TH-350 Kickdown Cable
replacement for stock items. Available in BMM70242 Universal GM 700R4 Throttle Valve Cable
cast aluminum or chrome-plated steel.
Filter extensions are included where Vacuum Modulator
needed.
BMM20234
Part No. Description BMM20280
Cast Aluminum Transmission Pans
Adjust TH350 or TH400’s shift
BMM20280 GM TH400, Additional 2 Quarts points within a 2-4 MPH range.
BMM30280 GMTH350/TH250, Additional 3 Quarts
BMM70280 GM Powerglide, Additional 2 Quarts Hi-Tek
BMM10280
Chrysler Torqueflite 727/A518,
Additional 4 Quarts
Transmission Cooler
BMM50281 Ford C-4, Additional 2 Quarts The Hi-Tek fin and plate-style
BMM40281 Ford C-6, Additional 2 Quarts cooler does a remarkable job of
Chrome Steel Transmission Pans cooling transmission fluid. Coolers
BMM20289 GM TH400, Additional 2 Quarts have 1/2"NPT and thermal switch
BMM30289 GM TH350, Additional 3 Quarts activates fan at 175°F.
BMM70289 GM 700R4/4L60, Additional 3 Quarts
Part No. Description
13-1/2" x 9" x 3-1/2", 9-1/2" Dia.
BMM70297
Fan at 500 CFM, 6 Amps, 7 lbs.
BMM70298 10" x 7-1/2" x 4", 7" Dia. Fan at 350 CFM, 6 Amps, 5 lbs.

96 2023 - 2024 HOT ROD AND EARLY MUSCLE

EradiSpeed+ Iron-Sport Rear Brake
EradiSpeed+ rotors are a Systems
direct stock replacement. The “plus” indicates a two- Affordable Baer Iron-Sport
piece design for weight reduction. The hat is machined systems cover all popular
from billet or forged aluminum and anodized black. The rear ends and feature single
hats and rotors are joined by the same hardware used in piston calipers and vented,
Indy cars. drilled, slotted, and plated
Note: All BAER EradiSpeed™ rotors have faster thermal recovery, increased heat absorption, 11.625" directional curved
increased friction, low wear, and crossdrilled, slotted, and zinc-washed surfaces. Baer backs vane rotors. Also includes
all EradiSpeed™ rotors with a Limited Lifetime Warranty against warping.
Baer pads, stainless steel lines, aluminum brackets,
hardware, and instructions.
EradiSpeed 1
Systems include larger Baer ReMaster
rotors that still work with
original calipers. The Master Cylinders
advantage is increased A direct replacement for other
performance through master cylinders, the ReMaster
augmented leverage of the provides an optimal balance
one-piece larger rotor. All the hardware to relocate the between pressure and volume for excellent braking
stock calipers outward is provided. Eradi-Speed 1 rotors performance with reasonable pedal effort. Great for
may require larger wheels. most street and performance braking systems. Features
integrated mount for Baer billet proportioning valve.
EradiSpeed+1 Make Part No. Description
Master Cylinder Assembly 15/16" Bore
Larger than stock, two-
Black Anodized, 15/16" Bore, Left
piece aluminum hat and General Fit (2 Bolt) BAE6801272LP
Port
rotor combine benefits of Master Cylinder Assembly 1" Bore
EradiSpeed-Plus (two-piece)
Gray Anodized, 1" Bore,
and EradiSpeed-Plus 1 General Fit (2 Bolt) BAE6801238LP
Left Port
(larger than stock diameter). Black Anodized, 1" Bore,
General Fit (2 Bolt) BAE6801273LP
Left Port
SS4+ GM and Ford Master Cylinder Assembly 1-1/8" Bore
Black Anodized, 1-1/8" Bore,
Front Brake Systems General Fit BAE6801274LP
Left Port
The SS4+front brake system features
all the benefits of the larger Baer brake Baer Adjustable
system designed for 15" wheels. Perfect
for resto-mods and restorations where
Billet Proportioning Valves
modern brakes are needed. Can be Bolt-on proportioning valves allow
used with stock brake drum rear, or matched with a Baer easy adjustment of brake balance.
rear brake offerings. System features the S4, 4-piston Billet aluminum construction, with
calipers, built with stainless pistons and dual seals that 3/8-24 inverted flare inlet and
meet DOT specifications, mounted to a 13" cross-drilled outlet. Handles 100-3,000 PSI.
and slotted 1-piece rotor. All installation parts and Make Part No. Description
hardware included. Prop Valve Assembly
General Fit BAE2000057LP Black Anodized, Left Port
Master Cylinder Plumbing Parts
Track4 GM and Ford Banjo fitting hardline kit includes both lines,
Front Brake Systems General Fit BAE6801311 banjo and seals. Fits RP and LP for 15/16"
and 1" ReMaster.
The Track4 brake system is designed Hardlines for 3/8" fittings. Includes both
for cars with 17" or larger wheels. The General Fit BAE6801312 lines. Fits RP and LP. Fits only 15/16 and
Track4 features the large T4 caliper 1" ReMaster.
with staggered 4-piston sizes to
minimize pad wear, 6-cross bolts, and Push Rod Length Gauge
dual seals that meet DOT specifications, mounted to 13"
cross-drilled and slotted 1-piece rotors. All necessary
BAE6801279
installation parts and hardware included. Designed to easily and accurately
measure the push rod length,
this tool provides a way to set the
Extreme & Extreme- optimum clearance between the
Plus brake booster push rod and the
Massive six-piston, master cylinder.
aluminum mono-block
calipers and eye-dazzling,
cross-drilled 14" and 15"
2-pc. slotted rotors offer
serious stopping power and good looks.

2023 - 2024 HOT ROD AND EARLY MUSCLE 97

 BEC10168

Direct-Fit Series Eliminator Series

Aluminum Radiators Radiators
A minimum 20-40°F Be Cool’s Eliminator Series
temperature reduction over aluminum high-performance
copper/brass/lead radiators radiators have dual 1" cores,
makes these units ideal for billet filler necks, and folded
big inch, high-horsepower and tapered tanks in sizes
muscle cars. Compatible with to fit modern muscle car
all coolants and include cast restorations. All cores
aluminum filler neck. Available are 3" thick. Automatic
for a wide range of applications. transmission radiators have transmission cooler built in.
Call for specific fitment options. Standard Transmission Description
Part No.
BEC10168 1967-69 Camaro/Firebird, 1968-79 Nova BB
1966-67 Chevelle/El Camino, 1959-70 Full-Size
Direct-Fit Series BEC10016
Chevy, 1960-88 Chrysler A, B, E Body SB
Module Assemblies
Each module assembly Cooling Accessories BEC70003
includes a crossflow
aluminum radiator, electric
fan or fans (as horsepower
requires), aluminum fan
mounting brackets, fan BEC70002
wiring harness, diamond- BEC70001 BEC70006 BEC72031
cut vented coolant recovery
tank, billet radiator cap, and installation hardware. The Complete the new radiator installation with
electric fan engages at 195°F and switches off at 175°F. genuine Be Cool accessories including
Man. Auto radiator caps, recovery tanks, and electric
Engine Trans. Trans Fitment fan components.
Year and Model Size HP Module Module Codes
Chevrolet Part No. Description
1967-69 Camaro ALL 700 BEC80168 — D,R BEC70001 Round Style Billet Radiator Cap with Be Cool Logo
BEC70002 Octagonal Style Billet Radiator Cap with Be Cool Logo
Fitment Codes
BEC70006 Sure-Grip Machined Aluminum Radiator Cap
D: With passenger-side water pump outlet. Diamond-Cut Vented Recovery Tank
R: Except BB core support use , BEC61009, or BEC63009. BEC70003
7" x 3" With Inlet Fitting and Mounting Bracket
BEC72031 Aluminum Mounting Brackets for 13" and 16" Electric Fans
Automatic Trans Cooler Module BEC75021 Electric Fan Wiring Harness Kit with 40-Amp Relay

BEC96301
“Cool Max” high-performance
Be Coolant
external transmission BEC25001
cooler includes puller fan, Next generation propylene glycol
mounting brackets, and formula coolant has low toxicity
hardware. and is biodegradeable. Compatible
with all colors and brands of
antifreeze, it’s premixed and ready
to use, protects to -26°F with a
267°F boiling point, and has a
300,000 mile life. Gallon container.
Use of Be Coolant doubles the
warranty on Be Cool Radiators.

TrackMat
BEDTW2X4MAT
Ideal for use in the pits, garage, or trailer, TrackMat is a 2' x 4' folding mat
constructed from an ultra-tough, 3/4" thick foam pad fused with 100% polypropylene
fibers. Stain, oil, and chemical resistant, mat folds down to just 2' x 2' for easy storage.

98 2023 - 2024 HOT ROD AND EARLY MUSCLE

Tru Trac Ultimate Serpentine Top Mount
Serpentine System Conversion Kits for Long
Tru Trac bolts on at the water pump Water Pump Chevys
and aligns perfectly with no need
for stabilizer brackets or adjuster BSPFM2110PC
bars. System includes a 105-amp Polished aluminum billet pulleys
Powermaster alternator, Sanden and brackets are polished and clear powder coated.
SD-7 A/C compressor, Edelbrock Components include stainless steel fasteners, stainless
aluminum water pump, billet aluminum compressor steel turnbuckles, and high-quality QA1 rod ends. All
cover, a serpentine belt, hard-coated polished billet are designed to accept GM 60- to 80-amp alternators
aluminum pulleys with anodized belt surfaces, and Sanden 508 AC compressor. Small block top-mount
tensioners, fasteners, and all brackets. alternator only, passenger side.
Part No. Description
Chevrolet Serpentine A/C Conversion
BSP13220
BSP14220
Small Block, with AC and Power Steering
Big Block, with AC and Power Steering
Kit for Long Water Pump BBC
BSP13450 Top Mount LS, with AC and Power Steering BSPFM1325PC
Ford Manufactured from billet aluminum
BSP13600* Small Block, with AC and Power Steering and polished to a mirror finish,
* Must use Billet Specialties oil dip stick BSP40150. this AC add-on kit includes all the pulleys and brackets
needed to add a Sanden 508 compressor to a BBC with
Sanden A/C Compressor for serpentine belt drive. A dual idler pulley system maintains
Tru Trac Systems proper belt tension and ensures optimal alignment.
Includes stainless steel hardware and polished stainless
BSP12060 turnbuckle.
The same Sanden SD-7 air
conditioning compressor included Serpentine Mid Mount Kit
with Tru Trac serpentine kits.
Features a polished finish and 7-rib pulley. for Long Water Pump Small
Block Chevys
LSA 6.2L Tru Trac Kits are designed for 60 to 80-amp
GM alternators and include alternator
Serpentine System bracket, alternator pulley with fan
BSPBLK13410 and nose cone, water pump pulley with nose cone, crank
The LSA Tru Trac from Billet pulley, and stainless steel fasteners.
Specialties is engineered for Part No. Description
the horsepower of high-tech BSPFM2121PC Keyway Shaft, Polished
supercharged 6.2L engines. BSPFM2122PC Press-On Shaft, Polished
Satin-finish black powder
coating on brackets, black
hard anodized pulleys, and
stainless steel ARP fasteners provide added durability
V-Trac V-Belt Pulley System
and great looks. Includes compressor manifold and GM BSPV3220
factory supercharger tensioner, as well as an ATI Super In addition to the polished billet
Damper. Separate accessory drive and supercharger aluminum compressor manifold,
belts save accessory component bearings. A 170-amp V-Trac includes a Sanden SD-7 A/C
Powermaster alternator, a Sanden SD-7 AC compressor, compressor, compressor clutch
and a new Tuff Stuff Performance power steer pump cover, 105-amp 1-wire alternator,
complete the package. Edelbrock water pump, billet aluminum pulleys, billet
aluminum alternator and compressor mounts, and 12-pt.
170-Amp Alternator for ARP stainless steel fasteners. Kits with power steering
include new pump, pulley, and bracket. Fits small block
Tru Trac Systems Chevy with power steering and AC.
BSP12045
A direct replacement for the Top-Mount Alternator and
alternator included with TruTrac
serpentine kits. Rated at 170 amps,
Power Steering Kits for Big
this 12V one-wire Powermaster Block Chevys
alternator features a polished finish BSPFM2211PC
and gold-plated terminal posts. Not for use with V-Trac Designed for use with long water
pulley systems. pump. Includes top-mount
passenger side alternator bracket,
alternator pulley with fan and nose cone. Water pump
pulley with nose cone and crank pulley. Power steering
pump bracket and pulley. Stainless steel hardware.

2023 - 2024 HOT ROD AND EARLY MUSCLE 99

Small Block Chevy Accessory GM LS/LT Motor Swap
Brackets for Top, Low, and Mid- Mounts
Mount Alternators Precision CNC-machined from
billet 6061-T6 aluminum, mounts
Part No. Description
Low-Mount Alternator Bracket, allow installing a GM LS Gen. III/IV
BSPFM0105PC or LT Gen. V. engine into an early
Short Pump, Passenger Side
Mid-Mount Alternator Bracket, Long Pump, Camaro, Nova, Chevelle, or Impala
BSPFM0107PC
Passenger Side using 3-bolt motor mounts. Mounting points allow the
bellhousing to be located in the same position as a small
block Chevy or in increments of 1/2", 3/4", or 2-1/4" forward
if more firewall clearance is desired. Sold per pair with
necessary hardware. Offered with natural machined or
black anodized finish.
Big Block Chevy Accessory Description Natural Black
Brackets for Top, Low, and GM Gen. III/IV LS Motor Swap Mounts
GM Gen. V LT Motor Swap Mounts
BSP11600
BSP11630
BSP11605
—
Mid-Mount Alternators
Part No. Description A/C and Heat Bulkhead
BSPFM0205PC Low-Mount Alternator Bracket, Short Pump, Driver Side
Mid-Mount Alternator Bracket, Long Pump,
Plates
BSPFM0207PC Polished bulkheads built with
Passenger Side
BSP89120 Polished Billet Reservoir Cap for Saginaw PS Pump O-rings to provide a leak-free
seal, the A/C bulkhead has one
Independent Mount Alternator And A/C -6AN and one -10AN O-ring
connection. The heater hose
Compressor Brackets bulkheads have two -10AN O-ring connections, while the
Finally, brackets designed to mount the combo bulkhead has three -10AN O-ring connections and
A/C compressor and alternator separately one -6AN O-ring connection.
without the use of adjuster bars. The
Description Polished Black
A/C brackets fit Sanden 508-style Two-Port Bulkhead
compressors, while the alternator A/C Bulkhead (-10AN and -6AN Ports) BSP66720 BSPBLK66720
brackets accept GM 60-to 80-amp Heat Bulkhead (2x 5/8" to Push-On Ports) BSP66825 BSPBLK66825
alternators. A/C compressors Four-Port Bulkhead
mount on the passenger side of the Heat + A/C Bulkhead (2x 5/8" to Push-On,
BSP66920 BSPBLK66920
engine; alternators mount on the -10AN, and -6AN Ports)
driver’s side. Stainless hardware included. Heat + A/C Bulkhead (2x 5/8", -10AN, and
BSP66925 BSPBLK66925
-6AN Ports)
Part No. Description
Heat + A/C In-Line Bulkhead (2x 5/8" to
Small Block Chevy Short Water Pump Brackets BSP66935 BSPBLK66935
Push-On, -10AN, and -6AN Ports)
BSP10220 Top-Mount Alternator Bracket
BSP10221 Top-Mount A/C Compressor Bracket
BSP10420 Side-Mount Alternator Bracket
Small Block Ford Dipstick
BSP10421 Side-Mount A/C Compressor Bracket BSP40150
Designed for use with the
BSP13600 Tru Trac billet timing
Plain LS Valley Cover cover only. Features easy to read
Precision-machined from billet level markings and stainless steel
6061-T6 aluminum, the LS valley braided cover with PTFE inner tube.
cover offers a clean, no-frills way
to top off GEN IV LS engine blocks. Works
with OEM LS gasket, and includes stainless steel
fasteners. Natural machined or black anodized finish.
Part No. Description
Streamline Air Cleaners
BSP95059 Machine Finished Billet aluminum top has a three-
BSPBLK95059 Black dimensional machined wing nut
and a single highly polished
raised rib. Complements
Streamline valve covers and fits
all standard 4-barrel carburetors.
Includes integrated wing nut and air filter element. Made
in the USA. Small is 11-7/8"L x 8-3/8"W x 3"H and Large is
15"L x 8-1/2"W x 3"H.
Part No. Description
Streamline Oval Air Cleaner
BSP15324 Small, Matte Black Powder-Coated Finish
BSP15424 Large, Matte Black Powder-Coated Finish
Streamline 14" Air Cleaner
BSP15824 Matte Black Powder-Coated Finish

100 2023 - 2024 HOT ROD AND EARLY MUSCLE

Air Cleaners GM LS Modular Valve
Aluminum air cleaners are offered
in a polished finish with machined Covers
accents, or in satin black powder Add a clean, high-tech
coat. Several styles and sizes are appearance to the LS
available for single or dual-quad engine. Valve covers utilize hidden coils, wire harness
systems. BSP15630 and oil filler cap. Choose from polished or black anodized
finished with or without “Chevrolet” script. Sold per pair
Description Polished Black
Small Oval Air Cleaner with Crossed Flag complete with stainless ARP 12-point fasteners.
BSP15327
Logo, 11-7/8" x 8-3/8" x 3"H Part No. Description
Large Oval Air Cleaner with Crossed Flag BPSP95480 Polished w/Chevrolet Script Valve Covers
BSP15427
Logo, 15" x 8-1/2" x 3"H BSPP95485 Black Anodized w/Chevrolet Script Valve Covers
Round Ball-Milled Air Cleaner,
BSP15120
6-3/8" Diameter x 3"H
Round Ball-Milled Air Cleaner,
Valve Covers
BSP15820 BSPBLK15820 Rugged, stylish billet
14" Diameter x 3-1/2"H
Small Oval Ball Milled Air Cleaner, aluminum valve covers for
BSP15320
11-7/8" x 8-3/8" x 3"H small and big block Chevys
Small Oval Plain Air Cleaner,
BSP15329 are brightly polished (unless
11-7/8" x 8-3/8" x 3"H noted) for exceptional
Large Oval Ball Milled Air Cleaner,
BSP15420 looks and a leakproof seal.
15"L x 8-1/2"W x 3"H
Dual Quad Ball Milled Air Cleaner,
Grommets are included. Bow Tie
BSP15520
17-1/2"L x 9-3/8"W x 3-1/4"H Part No. Description
Small Oval Ribbed Air Cleaner for Single Small Block Chevy
BSP15630 BSPBLK15630
4bbl., 11-7/8" x 8-3/8" x3"H BSP95120 Short, Ball Milled
Large Oval Ribbed Air Cleaner, BSP95123 Short, Chevrolet Script
BSP15640 BSPBLK15640
15"L x 8-1/2"W x 3"H BSPBLK95123 Short, Black Powder Coat w/ Chevrolet Script
Dual Quad Ribbed Air Cleaner with K&N Air BSP95127 Short, Checkered Flag
BSP15650 BSPBLK15650
Filter, 15"L x 8-1/2"W x 3"H BSP95220 Tall, Ball Milled
Round Plain Air Cleaner, BSP95222 Tall, Chevy Power
BSP15829 BSPBLK15829
14" Diameter x 3"H BSP95223 Tall, Chevrolet Script
BSP95229 Tall, Plain
Streamline Valve Covers BSP95620 Tall, Ribbed
A fresh, new look for hot rods BSP95820 Centerbolt, 1-Pc., Ball Milled with Bolts
and customs, offered in Big Block Chevy
stock or short (2-3/4") height. BSP96021 Short, Bow Tie
BSP96022 Short, Chevy Power
Complements any exterior trim. Includes
BSP96023 Short, Chevrolet Script
metal baffles, grommets, and stainless steel BSP96120 Tall, Ball Milled
mounting hardware. Made in the USA. Available in a BSP96121 Tall, Bow Tie
variety of finishes, including matte black powder-coated BSP96123 Tall, Chevrolet Script
or ready-to-finish natural aluminum, both with a polished Small Block Ford
CNC-machined accent, or in a plain polished finish. BSP95320 Ball Milled, for 1962-85 289, 302, 351W and 5.0L
Part No. Description
BSP95124 SB Chevy 262-400, Short Style*, Black LS Valve Cover
BSP95124RTF SB Chevy 262-400, Short Style*, Ready to Finish
Conversion Kit
BSP95129 SB Chevy 262-400, Plain with Polished Finish
Precision-machined from billet
BSP95224 SB Chevy 262-400, Black aluminum, the LS conversion
BSP96124 BB Chevy 396-454, Black kit allows use of perimeter-
BSP95424 LS Engine, Black style small or big block Chevy
Note: Not for use with roller rockers and stud girdles. valve covers on LS motors while
hiding the coils underneath for a
Black Tall Valve Covers clean, classic look. Recessed wire channels to drop wires
into place for ease of installation, the conversion kit will
Made from high-grade aluminum,
also work with large LS3 coils. It retains the factory LS
with given a smooth satin black
gasket for a leak-free seal and includes a hidden oil fill
powder-coated finish. CNC-
cap on each side for easy access.
machined Chevrolet script or
Bowtie logo and rib accents. Metal Part No. Description
BSP95037 LS to SBC Valve Cover Conversion Kit
baffles and grommets included.
BSP96037 LS to BBC Valve Cover Conversion Kit
Part No. Description
BSPBLK95223 Chevrolet, SB Chevy 262-400, Tall, Pair
BSPBLK96123 Chevrolet, BB Chevy 396-454, Tall, Pair

2023 - 2024 HOT ROD AND EARLY MUSCLE 101

GM LS Valve Cover PCV Breathers, 1.220" Dia. BSP21120
Adapters Part No. Description
BSP21120 Plain Polished PCV Breather
Specialized adapters, BSP21720 Crossed Flags PCV Breather
precision machined from BSP21820 Ball Milled, Polished PCV Breather
billet 6061-T6 aluminum, PCV Breathers, 1.250" Diameter
allow use of traditional BSP22120 1-1/4" Polished PCV Valve
small block Chevy or Ford
valve covers on a GM LS Retro Breathers
motor for a classic appearance. Configuration utilizes the
Each retro-style breather is precision
OEM LS valve cover gasket on bottom and a cork gasket
machined from 6061-T6 aluminum. Breathers
on top. Sold complete with required hardware.
work with 1-1/4” diameter valve covers have a BSP20923
Part No. Description two piece design and include grommets. PCV
BSP95030 LS to SBC Valve Cover Adapter*
breathers have a washable filter element and feature a
BSP95032 LS to SBF Valve Cover Adapter
common replaceable valve. Made in the USA.
*Requires coil re-location. Will not work on LS1 cylinder head casting #806 or #933 which use
perimeter mount valve covers. Part No. Description
BSP20923 Retro Breather Chevrolet Script, Polished
BSPBLK20923 Retro Breather Chevrolet Script, Black
Valve Cover Hold-Downs BSPBLK21923 Retro PCV Breather Chevrolet Script, Black
1/4"-20 studs, packs of four.
Part No. Description Oil Fill Caps
BSP95011 Acorn-Style Bolts, Polished Machined from billet aluminum
BSP95013 Hex-Style Bolts, Polished
and available for a variety of
applications. Choose from push-on,
Valve Cover Breathers twist-on, screw-on, or weld-in caps.
Designed for long-lasting performance Weld-in cap includes bung which
and easy care, two-piece billet breathers is welded to the valve cover, rear
have positive O-ring seal. PCV breathers end housing, etc. Weld-in bungs are
use a common, replaceable PCV valve. 1-5/8" diameter.
Part No. Description Part No. Description
BSP20120 Plain Polished, 1-1/4" Dia. BSP23120 Push-On
BSP20220 Bow Tie, 1-1/4" Dia. BSP23220 Twist-On
BSP20720 Crossed Flags, 1-1/4" Dia. BSP23320 Screw-On (Late GM)
BSP20820 Ball Milled, 1-1/4" Dia. BSP24110 Aluminum Weld-In Bung
BSP20825 Ball Milled, 1" Dia.
BSP20920
BSPBLK20939
Oval, 1-1/4" Dia.
Retro Plain Oval, 1-1/4" Dia., Black
Universal Wire Looms
BSP20950 Oval Ribbed, 1-1/4" Dia. Looms neatly organize spark plug
BSP21950 Oval Ribbed with PCV, 1-1/4" Dia. and distributor wires and add a
BSP95003 Breather Grommet, 1" I.D. great amount of detail to the engine
BSPRP2010 Breather Filters, 2" O.D., Pack of 4 compartment. Polished. Fits all
Chevy and Ford V8.
Billet In-Line Fuel Filter Part No. Description
Suitable for carbureted or fuel- BSP69520 Wire Loom, Ball Milled
injected engines, these billet BSP69523 Wire Loom, Bowtie Logo
BSP69529 Wire Loom, Plain
aluminum in-line fuel filters
BSP69600 SB Chevy, Center Bolt Late Model Bracket Kit Center Bolt
feature a 40-micron screen
element that can be cleaned or
replaced. Offered with a choice Billet 8.5mm Plug Wire Separators
of -6AN fittings or hose barbed ends, they are available in All new, snap-in wire guides offer a clean, efficient
polished or black anodized finish. Mounting bracket sold solution to the 8.5mm ignition wire dilemma by
separately. routing the wires in a straightforward
Description Polished Black
fashion. CNC-machined from 6061-T6
40-Micron In-Line Fuel Filter billet aluminum, polished to a mirror
BSP42130 BSPBLK42130 finish. Sold in pairs.
with Hose Barbed Ends
40-Micron In-Line Fuel Filter Part No. Description
BSP42230 BSPBLK42230
with -6AN Fittings BSP69701 1-Wire, Valve Cover Mount, Pair
Mounting Bracket BSP42520 BSPBLK42520 BSP69702 2-Wire, Valve Cover Mount, Pair
BSP69703 3-Wire, Valve Cover Mount, Pair
LS Engine Oil Pick-up Girdle BSP69704 4-Wire, Valve Cover Mount, Pair
BSP69602 2-Wire, Floating, Pair
BSP65710 BSP69601 4-Wire, Floating, Pair
Machined billet aluminum girdle provides BSP69604 4-Wire, Cylinder Head Mount, Pair
equal clamping force to both sides of
the oil pick-up tube for optimal support.
Includes hardware.

102 2023 - 2024 HOT ROD AND EARLY MUSCLE

Polished Billet Chevy OverFlow Tanks
Distributor Hold-Down A perfect complement to aluminum radiator
installations, ribbed overflow tanks have
BSP65920 O-ring sealed caps and adjustable mounting
Fits small block and big block Chevy brackets.
through 1979.
Part No. Description
BSP77910 Smooth Polished Tank with Bracket
Dipstick BSPBLK77910
Smooth Black Anodized Tank
with Bracket
BSP40120
Plain handle, polished dipstick kit for small block
Chevrolet through 1979.
8.75" OverFlow Tanks
100% billet aluminum construction. Mirror-
polished finish or high-gloss black anodized
Fuel Filter Mounting Bracket finish. Exclusive mounting bracket clamps to
BSP42520 the tank with an internal lock. The mounting
Billet aluminum filter bracket fits hardware is completely hidden!
Billet Specialties in-line fuel filters. Note: Bracket must be installed at center of reservoir as shown.
Polished finish. Stainless steel Part No. Description
hardware included. BSP77109 Smooth Polished Tank with Bracket
BSPBLK77109 Black Anodized Tank with Bracket
Fuel Pump Block-Off Plates
Covers fit stock fuel pump openings Notched Grip Radiator Cap
on small and big block Chevrolet, Ford, Machined from billet 6061-T6 aluminum
and Chrysler engines. Fully polished notched sides provide a positive grip and
with stainless hardware. features a Stant internal 16-lb. pressure-
Part No. Description
relief assembly. The billet cover is
BSP41120 Small Block Chevy disassembled for proper positioning.
BSP41220 Big Block Chevy Part No. Description
BSP41620 Small Block Ford 289/302/351W and Big Block 429/460, FE BSP75125 Notched Radiator Cap, Polished
BSPBLK75125 Notched Radiator Cap, Matte Black Powder-Coated Finish

Thermostat Housings Radiator Caps

Conventional and swivel-style Billet dome style radiator caps have 6061-T6
housings are available for Chevys, tops with knurled grip sides. Polished finish
Fords, and Chryslers. Housings unless otherwise indicated.
are machined from billet and then Part No. Description
welded to eliminate any possible BSPBLK75120 Plain, Black Anodized
leaks. O-ring seal eliminates gaskets or sealant. Complete BSP75120 Plain, 16 lb. Cap
with stainless hardware. BSP75220 Circle, 16 lb. Cap
BSP75320 Chevy Logo, 16 lb. Cap
Description Polished Black
BSP75420 V8 Logo, 16 lb. Cap
SB & BB Chevy
BSP76320 Chevy Logo, 7 lb. Cap
Straight Up, -16AN BSP90116 BSPBLK90116
Straight Up, -20AN BSP90119 BSPBLK90119
Straight Up, 1-1/2" BSP90120 BSPBLK90120 A/C Compressor Cover
Swivel Housing, 15°, 1-1/2" BSP90320 BSPBLK90320
BSP87120
Swivel Housing, 45°, 1-1/2" BSP90420 BSPBLK90420
Swivel Housing, 0°, 1-1/2" BSP90220 BSPBLK90220
It’s the small details that count. Dress up
LS a unsightly compressor clutch with one of
Straight Out, 1-1/2", 2004-09 LS BSP90134 BSPBLK90134 these highly polished covers.
Straight Out, 1-1/2", 2010-Up LS BSP90135 BSPBLK90135
Swivel, 15°, 1-1/2", 2004-09 LS BSP90334 BSPBLK90334
Polished Swivel, 15°, 1-1/2", 2010-Up LS BSP90335 BSPBLK90335
SB & BB Chrysler
Straight Up, 1-1/2" BSP90820 —
Straight Up, -20AN BSP90825 BSPBLK90825
SB, BB & FE Ford
Small Block, 0° BSP90620 —
Big Block, 0° BSP90720 —
Big Block, 15° BSP90725 —
FE, 0° BSP90730 —

2023 - 2024 HOT ROD AND EARLY MUSCLE 103

Crankshaft, Water Pump, Power Steering Hose Kit
and Alternator Pulleys Finish a Tru Trac or V-Trac installation
Highly polished single-, double-, and triple- the right way with a premium hose kit.
groove crank pulleys, single- and double- Each kit is supplied with enough adapters
groove water pump pulleys, alternator fan, to cover most popular GM boxes and
pulley and nose cone assemblies are all Ford type racks. Quality fittings and hose from Russell
BSP80120 Performance are used exclusively to ensure reliability.
machined from billet aluminum for strength.
Offered in polished or black anodized finish. For use with
Part No. Description
BSP80120 SB Chevy SWP Single-Groove Water Pump Pulley
Tru Trac or V-Trac systems with GM Type II pumps only.
BSP80220 SB Chevy SWP Double-Groove Water Pump Pulley Part No. Description
BSP84120 SB Chevy SWP Water Pump Pulley Nose Cone Power Steering Hose Kit, Remote Reservoir,
BSP77900
BSP81120 SB Chevy SWP Single-Groove Crank Pulley Polished
BSP81220 SB Chevy SWP Double-Groove Crank Pulley Power Steering Hose Kit, Remote Reservoir,
BSPBLK77900
BSP81320 SB Chevy SWP Triple-Groove Crank Pulley Black
BSP78220 SB Chevy LWP Double-Groove Crank Pulley Power Steering Hose Kit, Pump-Mounted
BSPBLK77905
Reservoir, Black
BSP78230 SB Chevy LWP Triple-Groove Crank Pulley
BSP78110 SB/BB Chevy LWP Single-Groove Water Pump Pulley
BSP78120 SB/BB Chevy LWP Double-Groove Water Pump Pulley Power Steering Adapter Kit
BSP83220 BB Chevy SWP Double-Groove Crank Pulley
BSP83320 BB Chevy SWP Triple-Groove Crank Pulley
BSP77901
BSP82120 BB Chevy SWP Single-Groove Water Pump Pulley Kit adapts power steering hose kit
BSP82220 BB Chevy SWP Double-Groove Water Pump Pulley (BSP77900) to fit most power steering
BSP79210 BB Chevy LWP Single-Groove Crank Pulley rack and pinion and steering box set-ups. Applications:
BSP79220 BB Chevy LWP Double-Groove Crank Pulley 1977-78 Mustang II rack and pinion, up to 1988 T-Bird
BSP79230 BB Chevy LWP Triple-Groove Crank Pulley rack and pinion, Maval Mfg. rack and pinion, Saginaw 600
BSP84220 SB/BB Chevy Long Water Pump Nose Cone steering gear box.
BSP85220 GM Alternator Fan and Pulley, One-Piece

Reservoir Tight Fit Kit

GM Keyed Power Steering Pulleys BSP77902
Fits 1966-74 GM Saginaw power steering Perfect for when space is limited, kit
pump with 1/8" keyway. Available in single- includes -6AN and -10AN 90° fittings for
or two-groove options. Polished finish. use with Billet Specialties remote reservoirs.
Part No. Description
BSP86120 Single-Groove Keyed Power Steering Pulley Billet Bolt-On
BSP86220 Two-Groove Keyed Power Steering Pulley
Power Steering Reservoir
Engineered for use with Billet Specialties
Tru Trac or V-Trac drive systems fitted
to small or big block Chevys, bolt-on
SB Chevy Press-On Power power steering reservoir features double O-ring hose
Steering Pulleys attachments for leak-free service. Choose from polished
For use on long water pump applications or black anodized finished.
that use a GM canister-style power steering Part No. Description
pump. BSP77930 Polished
Part No. Description BSPBLK77930 Black Anodized
BSP86420 Single-Groove Press-On Power Steering Pulley
BSP86520 Two-Groove Press-On Power Steering Pulley Power Steering Reservoirs
Reservoirs have vented caps and internal
Remote Power Steering baffling for foam-free operation. The inlet and
Pump return fittings are -6AN and -10AN respectively.
Pump is brand new (not Mounting brackets are included.
remanufactured), flows 3 GPM with Part No. Description
1100 PSI pressure and includes cad BSP77910 Smooth Reservoir with Bracket
BSPBLK77910 Smooth Black Anodized Reservoir with Bracket
plated -6 and -10AN fittings.
Part No. Description
BSP12020 Natural Polished GM Type II Power Steering Bracket
BSP12025 Polished and Pulley Kit
BSPFM1225PC
Flow Control Valve BB Chevy long water pump applications
BSPRP1300 are for use with billet serpentine
2 GPM flow control valve is for use with conversion kit. Includes a new polished
Ford rack and pinion. 1200 PSI GM Type II power steering
pump with pre-installed polished
billet serpentine pulley and AN fittings, polished billet
aluminum bracket, and stainless steel hardware.

104 2023 - 2024 HOT ROD AND EARLY MUSCLE

Hose Ends Hose Separators
Add even more luster under the hood with Billet Engine compartment and chassis
Specialties hose ends. Each has a built-in clamp for tight hose separators. Made from billet
hose connections and ease of installation. aluminum, separators are available
Part No. Description in polished or black anodized finish. Sold individually.
BSP67425 For 5/8" Rubber Heater Hose Description Polished Black
BSP67625 For 3/4" Rubber Heater Hose Fits Hose O.D. .440" and .540" BSP68020 BSPBLK68020
BSP67825 For 1-1/2" Radiator Hose Fits Hose O.D. .440" and .630" BSP68025
BSP67925 For 1-3/4" Radiator Hose BSP67825 Fits Hose O.D. .500" and .500" BSP68120 BSPBLK68120
Fits Hose O.D. .562" and .562" BSP68220 BSPBLK68220
Line Clamps Fits Hose O.D. .562" and .625" BSPBLK68225
Fits Hose O.D. .625" and .625" BSP68320 BSPBLK68320
Modern plumbing hardware for
Fits Hose O.D. .625" and .781" BSPBLK68325
the serious car enthusiast. Made Fits Hose O.D. .734" and .890" BSPBLK68420
of 6061-T6 aluminum and highly Fits Hose O.D. .734" and .969" BSP68425 BSPBLK68425
polished. Available in five sizes: Fits Hose O.D. .781" and .781" BSP68520 BSPBLK68520
3/16", 1/4", 5/16", 3/8", and 1/2". Four Fits Hose O.D. .781" and .906" BSPBLK68525
to a package. Stainless hardware Fits Hose O.D. .890" and .969" BSPBLK68625
included. Fits Hose O.D. .906" and .906" BSP68720 BSPBLK68720
Part No. Description Fits Hose O.D. .906" and 1.015" BSP68725 BSPBLK68725
BSP65110 3/16" Clamps Fits Hose O.D. .906" and 1.125" BSPBLK68729
BSP65210 1/4" Clamps Fits Hose O.D. 1.015" and 1.015" BSP68820 BSPBLK68820
BSP65410 3/8" Clamps
BSP65510 1/2" Clamps
Hose Separator Technical Data
A/C Hose Diameter Braided AN Line Diameter
Rad Rides Pro Bolts Hose
No. Decimal Fraction
Dash
Size Decimal Fraction
Developed by Rad Rides by Troy, these stainless fender -6 .734" 47/64" -6 .562" 9/16"
washers were designed to avoid paint distortion during -8 .890" 57/64" -8 .625" 5/8"
assembly and add style to your engine compartment. -10 .969" 31/32" -10 .781" 25/32"
Stainless hardware included. Sold in pairs. -12 .906" 29/32"
-16 1.125" 1-1/8"
Part No. Description
Black Heater Hose Diameter
BSPBLK66110 5/16-18 x 1", 3/4" O.D. Size Decimal Fraction
Polished 5/8" .906" 29/32"
BSP66110 5/16-18 x 1", 3/4" O.D. 3/4" 1.015" 1-1/64"
BSP66120 3/8-16 x 1", 7/8" O.D.
BSP66130 1/4-20 x 1", 11/16" O.D.
BSP66140 10-24 x 1", 9/16" O.D.
BSP66115 5/16-18 x 1", 1" O.D.
Billet Battery BSP248910

Through-Frame Fittings Mounts

Clean up brake installations with Billet aluminum mount
gleaming, through-the-frame has a recessed bottom
fittings. Sold in pairs. tray to lock the battery
in place. Includes
Part No. Description
BSP66210 Stainless 3AN x 1/8"NPT, 2" Long
stainless hardware.
BSP66310 Stainless 3AN x 1/8"NPT, 2-3/8" Long Black or polished.
Part No. Description
A/C and Heat Bulkhead Plates Optima Batteries
BSP248910 Black/Clear Anodized
Polished bulkheads built with O-rings BSP248915 Fully Polished
to provide a leak-free seal, the A/C Powermaster
bulkhead has one -6AN and one -10AN S1000/S1600 And D1000/D1600 Batteries
O-ring connection. The heater hose BSP248920 Black / Clear Anodized
bulkheads have two -10AN O-ring BSP248925 Fully Polished
connections, while the combo bulkhead has three -10AN
O-ring connections and one -6AN O-ring connection.
Description Polished Black Floor-Mounted Gas Pedal for 1955-57
Two-Port Bulkhead
A/C Bulkhead (-10AN and -6AN Ports) BSP66720 BSPBLK66720 Chevy
Heat Bulkhead (2x 5/8" to Push-On Ports) BSP66825 BSPBLK66825 Add that finishing touch with this billet aluminum
Four-Port Bulkhead gas-pedal with a CNC-machined non-slip surface.
Heat + A/C Bulkhead (2x 5/8" to Push-On,
BSP66920 BSPBLK66920 Floor-mounted pedal mounts in the factory
-10AN, and -6AN Ports) location with stainless steel hardware (included).
Heat + A/C Bulkhead (2x 5/8", -10AN, and
BSP66925 BSPBLK66925 Available in polished or black anodized finish.
-6AN Ports)
Heat + A/C In-Line Bulkhead (2x 5/8" to Description Polished Black
BSP66935 BSPBLK66935 Floor-Mounted Gas Pedal for
Push-On, -10AN, and -6AN Ports) BSP199250 BSP199255
1955-57 Chevy

2023 - 2024 HOT ROD AND EARLY MUSCLE 105

1955-57 Chevy Pedals Emergency Brake Pedal Pad for
Pedals have machined non- 1958-64 GM B-Body
slip surfaces and are available Replace a worn emergency brake pedal
in polished and durable black pad with one of these stylish billet pads!
anodized finishes. The gas pedal These 2-7/8"W x 2-1/2"W pads feature a CNC-machined
assembly converts old throttle non-slip surface and include stainless steel hardware.
linkage to a more modern cable- Available in polished or black anodized finish with polished
style linkage for extra firewall highlights.
clearance and smooth operation.
Description Polished Black
Gas pedal assembly installs in Emergency Brake Pedal Pad for
factory firewall location with 1958-64 GM B-Body
BSP199640 BSP199645
existing hardware.
Part No. Description
Gas Pedals D-Shaped Select Edition BSP29409
BSP199155 Black Anodized, Rectangle Steering Wheels
Power Brake Pedals
Race-inspired, D-shaped steering
BSP199455 Black Anodized, Large Rectangle
Brake/Clutch Pedals
wheels are precision machined
BSP199315 Black Anodized, Rectangle from billet 6061-T6 aluminum,
BSP199335 Black Anodized, Oval include a leather half-wrap on the
front, and milled finger notches on the rear. Steering
Gas, Brake, and Clutch Pedals wheel bolts directly to Billet Specialties or similar 9-hole
adapters and require purchase of the D-shaped half wrap.
Billet pedals provide Rectangular
multiple mount points, Part No. Description
BSPBLK29402 Camber Steering Wheel, Black Anodized
fully adjustable arms,
BSP29409 Formula Steering Wheel, Polished
and a wider, stable base BSPBLK29409 Formula Steering Wheel, Black Anodized
are just some of the BSPBC29409 Formula Steering Wheel, Contrast Cut
key features that make BSP294091 Formula Steering Wheel, Gunmetal Matte
these pedals stand out. BSP29427 Trans Am Steering Wheel, Polished
Brake/clutch pedals can BSPBLK29427 Trans Am Steering Wheel, Black Anodized
be mounted centered BSP294271 Trans Am Steering Wheel, Gunmetal Matte
or offset. Pedals have BSP29441 Victory Steering Wheel, Polished
machined non-slip BSPBLK29441 Victory Steering Wheel, Black Anodized
surfaces and are available in polished and durable black BSP294411 Victory Steering Wheel, Gunmetal Matte
anodized finishes. BSP29475 Prism Steering Wheel, Polished
BSPBLK29475 Prism Steering Wheel, Black Anodized
Part No. Description BSP294751 Prism Steering Wheel, Gunmetal Matte
BSP199110 Polished, Rectangle
BSP199115 Black Anodized, Rectangle
Half-Wrap Steering Wheels
Flawless polished finishes and milled finger notches on
Full-Size Chevy Gas, the backside of the grip are only two of the features of the
Brake, and Clutch Pedals striking half-wrap steering wheels. Adapter, horn button,
Add the finishing touch to the and leather half-wrap sold separately.
driver’s compartment with Part No. Description
these beauties. Pedals have BSP29825 Eagle 14"
BSP30103 Street Lite 14"
machined non-slip surfaces
BSPBLK30103 Street Lite, Black 14"
and are available in polished BSPP30017 Fury, 14"
and durable black anodized BSP30445 Outlaw 14" BSP29825
finishes. Pedals are easy to BSP30725 Classic 14"
install, just remove the stock BSP30765 Chicayne 14"
pedal, remove the ball pivots, BSP30955 Sniper 14"
and bolt in the new pedal. BSP34725 Classic 15.5"
Part No. Description BSP34005 BLVD 05, 15.5"
Gas Pedals BSP34007 BLVD 07, 15.5"
Fit 1958-64 Bel Air, Biscayne, Impala, 1964-67 Nova, Chevelle, El Camino BSP34042 BLVD 42, 15.5"
BSP199240 Polished, Replacement Gas Pedal BSP34055 Psycho, 15.5"
BSP199245 Black Anodized, Replacement Gas Pedal BSP34065 Phantom, 15.5"
Power Brake Pads BSP34120 Hollowpoint, 15.5"
Fit 1958-64 Bel Air, Biscayne, Impala, 1963-67 Nova BSP34123 Hurricane, 15.5"
BSP199455 Black Anodized, Large Brake Pad BSP34152 Twinspin, 15.5"
BSP34165 Spyder, 15.5"
BSP34322 Stealth, 15.5"
Note: Must use a half-wrap steering wheel with the leather covered half wrap ring.

106 2023 - 2024 HOT ROD AND EARLY MUSCLE

Half-Wrap Profile Collection Horn Buttons
Steering Wheels BSPP30092 Part No. Description
Wheels feature a half-wrapped BSP32120 Smooth, Polished
BSP32125 Large Smooth, Polished
and fully polished aluminum wheel
BSP32320 Bowtie Logo, Polished
with milled finger notches on the BSP32325 Bowtie Logo, Large Polished
backside and a premium leather BSP32620 Billet Logo, Polished
front. Polished billet aluminum BSP32625 Large Billet Logo, Polished
accent pieces rise up from each BSPBLK32625 Large Billet Logo, Black
spoke and flow out over the half-wrap and horn button for Related Component
a great new look. Adapter, horn button, and leather half BSPRP2510 Horn Wire for GM Column
wrap sold separately.
Part No. Description Steering Wheel Adapters
BSPP30092 Stiletto 14" Highly polished adapter allows installation
BSPP34092 Stiletto 15.5" of Billet Specialties or LeCarra 9-bolt
Note: Not for use with simulated carbon fiber or burlwood covers. steering wheels on GM columns.
Part No. Description
Leather Half-Wraps BSP31120
BSP31322
1967-94 GM Steering Wheel Adapter
1949-66 GM Steering Wheel Adapter
Half-wraps are fastened by
hidden bolts recessed in the
back of the wheel. 14" unless
Racing Steering Wheel Adapter
noted otherwise. BSPBLK31030
Part No. Description Red Light Gray Black anodized adapter allows installation
BSP29002 Tan Leather of Billet Specialties steering wheels onto
BSP29003 Light Gray Leather a quick-release hub adapter. Offers 3-, 5-,
BSP29004 Dark Gray Leather and 6-bolt mounting patterns.
BSP29005 Red Leather
BSP29008 Black Leather Accessories
BSP33005 15.5" Red Leather
Tan Dark Gray Part No. Description
BSP33008 15.5" Black Leather
BSPBLK31260 Racing Wheel Center Cap, Plain, Black
Racing Wheel Center Cap,
D-Shaped Half Wraps BSPBLK31265
with Billet Specialties Logo, Black
Designed specifically for BSP28708
Select Edition Steering Billet Dimmer Switch Covers
Wheels, half wraps are offered
in top grain leather as well BSP199875
as in bare plastic to allow a Covers have machined non-slip surfaces,
truly custom finish through a favorite stainless set-screws and fit Chevy and
upholstery shop. Ford applications (7/8" I.D.). Available in
durable black anodized finishes.
Part No. Description
D-Shaped Half Wrap,
BSP28700
14" Bare (No Leather) Polished Dimmer Switch Cover
D-Shaped Half Wrap,
BSP28708
14" Black Leather BSP199860
Profile-polished dimmer switch cover
Billet GM Door Jamb Vents adds a touch of elegance to virtually any
Add some style to 1971-72 GM C & K series trucks, street rod. CNC-machined aluminum
1970-72 A-Body cars, or a 1970-92 Camaro/ cover uses a stainless set screw for
Firebird. CNC-machined billet aluminum door retention. Fits most Chevy and Ford.
jam vents are available in polished or black
anodized finish. Sold each (two needed for A/F- Billet Dash Knobs
Body applications). Small details usually get the most
Description Polished Black attention, so finish off that dash with
Billet Door Jamb Vents BSP171120 BSPBLK171120 some billet dash knobs. Universal
fit, with a 3/16" bore and set screw.
Billet Door Lock Knobs for 1955-57 Chevy Polished to a mirror finish.
CNC-machined billet aluminum door lock knobs Part No. Description
measure 1-5/8" tall, and are available with 10- BSP26002 Classic
BSP26003 Smooth
24 threads for most applications, or with 6-40
threads to fit Tri-Five Chevys. Available with a
mirror-like polished finish, or black anodized.
Sold in pairs.
Description Polished Black
Door Lock Knobs with 10-24 Threads BSP45910 BSPBLK45910
Door Lock Knobs with 6-40 Threads BSP45930 BSPBLK45930

2023 - 2024 HOT ROD AND EARLY MUSCLE 107

Air Conditioning Vents Open Bezel LED Taillights
Choose from three styles. All will fit
standard 2-1/2" hose.
BSP61225
With bezels machined from 6061-T6
Part No. Description aluminum finished to a mirror polish,
BSP38110 Billet Bezel BSP38110 BSP38220
BSP38320 Silhouette
these taillights provide a custom look
and plenty of visibility to hot rods. Steel 6”W x 1-1/4”H x
4-1/2”D housings feature LED1157 bulbs for long life and
Mirror Heads increased brightness.
Machined from 6061-T6
billet, all of these mirror
components are interchangeable and Third Brake Light
have stainless steel swivels supported by BSP73420 BSP62220
nylon inserts. Polished oval third brake light
Part No. Description provides an extra margin of
BSP73420 Rectangular Large, Polished, 1-3/4" x 5-1/4" safety for any street rod or
BSP73520 Oval Mirror Head, Polished, 2-5/16" x 4-3/16" custom.

Door Handles, Vent, and Window Cranks License Plate Frames

Easy to position; just mount the spline on the regulator, Machined from 6061-T6 billet and
slide the aluminum cover over the spline, align the arm recessed on backside to conceal
to the proper position, tighten, and snap on the cover. license plate. Includes stainless
Available in polished, ball milled, or new rail designs. Ball mounting hardware. Choose from
milled handles have an aggressive, high-tech look while BSP55220
plain or logo-style frames.
the rail handles add a touch of elegance. Sold in pairs.
Part No. Description
Part No. Description BSP55020 Slimline Frame, Polished
Door Handles BSPBLK55020 Slimline Frame, Black
BSP45425 Ball Milled, GM To 1948 BSP55120 Plain Frame, Polished
BSP45520 Polished, GM/Ford 1949-Up BSP55220 Lighted Frame, Polished
BSP45525 Ball Milled, GM/Ford 1949-Up BSP55320 Lighted Bowtie, Polished
BSP45520
BSPBLK45525 Ball Milled, Black,GM/Ford 1949-Up BSP55520 Third Brake Light Frame, Polished
BSP45528 Rail, GM/Ford 1949-Up
Window Cranks
BSP46325 Ball Milled, Ford To 1948
1967-69 Camaro
BSP46520 Polished, GM/Ford 1949-Up Billet Taillight Bezels
BSP46525 Ball Milled, GM/Ford 1949-Up BSP46525
BSPBLK46525 Ball Milled, Black,GM/Ford 1949-Up
BSP61737
BSP46528 Rail, GM/Ford 1949-Up Add a custom billet touch
Vent Window Crank to 1969 Camaros RS, flush,
BSP47520 Polished, GM/Ford 1949-Up slotted, polished, pair with
BSP47525 Ball Milled, GM/Ford 1949-Up billet aluminum taillight
BSP47525
bezels. Three dimensionally
ProFile Mirror Kits machined billet 6061-T6
Multiple mounting options and timeless styling make aluminum bezels feature a highly polished finish,
these mirrors the ideal replacements on any car from the one-piece cast acrylic lens, and stainless steel hardware.
twenties through the sixties. Forged Made in the USA.
aluminum arms have four threaded
holes for a rigid, secure mounting Shifter Boot RIngs
on the top or the bottom of the door. Precision machined from billet 6061-T6
The stainless steel swivels and nylon aluminum, these rectangular shifter
BSP74520
bushings assure smooth, positive boot rings measure 5-3/4" x 7-1/8"
adjustment. Oval, and oblique styles and include stainless steel hardware.
are available. Sold in pairs. Suitable for use with leather or rubber shifter boots, they
Part No. Description are offered with a cog pattern or a smooth outer edge
BSP74520 Oval Profile Mirrors Available in polished or black anodized finish.
BSP74820 Oblique Profile Mirrors BSP74820
Description Polished Black
Smooth Shifter Boot Ring BSP279312 BSPBLK279312
Rear View Mirror Mounts Cog Pattern Shifter Boot Ring BSP279310 BSPBLK279310
Mirror mounts are available in
bolt-on or glue-on models for
interior mounting.
BSP72120
Part No. Description
BSP72120 Glue-On, Polished
BSP72220 Bolt-On, Polished BSP72220

108 2023 - 2024 HOT ROD AND EARLY MUSCLE

3-Piece Power Steering Street Lite Wheels
Wrench Set Spun aluminum rims offer
lighter weight, less unsprung
BSP77903 weight, and superior run-
Three-piece, double-ended out for drag racing or street
aluminum power steering use. Billet Specialties new
wrench set includes specialty sizes specifically for Billet Street Lite wheel is a 2-piece,
Specialties power steering hose kits, as well as a -6AN 360° welded wheel with
and -10AN wrench. Red anodized finish. rotary forged centers and a
combination of polished and machined surfaces for an
Aluminum Vise Jaw Inserts aggressive, competition look. The Street Lite is SFI 15-1
BSP77906 approved and offers an outstanding strength to weight
Designed to fit a standard 4" ratio.
vise, these billet aluminum jaw Note: Use mag shank lug nuts.
inserts feature special V-cuts Back
to help grip aluminum fittings Size Spacing 5 x 4.50" BC. Part No. 5 x 4.75" BC
15 x 3.5 1.75" BSPRS035356517N BSPRS035356117N
during assembly to prevent
15 x 4 1.625" BSPRS035406116N —
scratches and damage. Powerful
15 x 4 2.25" — BSPRS035406122N
magnets hold the inserts in 15 x 6 3.5" — BSPRS035606135N
place. Black anodized finish. 15 x 7 4.5" — BSPRS035706145N
15 x 10 3.5" BSPRS035106535N BSPRS035106135N
15 x 10 5.5" — BSPRS035106155N
Billet Hood Hinges 15 x 10 6.5" BSPRS035106565N —
Billet hood hinges are manufactured 15 x 12 3.5" BSPRS035126535N BSPRS035126135N
from three dimensionally machined 17 x 4.5 2.0" — BSPRSF037456120N
billet 6061-T6 aluminum and use
precision sealed bearings and stainless Street Lite Wheels - Lug Nuts
fasteners. Choose from polished, black Street Lite 15"x 3-1/2", 1-3/4" back spacing
anodized, or raw machined. Gas springs must and 15" x 4" 2-1/4" back spacing wheels
be purchased separately. BSP3610HDSS require a 1/2" long shank with small diameter
Part No. Description washer. All other Street Lite wheels use
1967-69 Camaro/Firebird, a 3/4" shank lug nut and small diameter
1965-67 Chevelle/El Camino washer.
BSP3610HDSS Polished Stainless HD Gas Spring Shank Hex
BSP873512 1955-56 Chevy Hood Hinges, Polished Thread Size Size Part No.
BSP873612 1955-56 Chevy Hood Hinges, Raw Machined Gorilla Lug Nuts
12mm X 1.50 1/2" 13/16" GOR73137SMB
Billet Shift Levers BSP264825 12mm X 1.50 3/4" 13/16" GOR73137B
14mm X 1.50 3/4" 7/8" GOR73147B
Billet aluminum shift levers are designed
7/16" 1/2" 13/16" GOR73177SMB
are available in 8" and 10" lengths, with 7/16" 3/4" 13/16" GOR73178
either a grid or outlaw design. They feature 1/2" 3/4" 13/16" GOR73188
a 3/8"-16 shifter grip stud and are designed McGard Lug Nuts
for use with Tremec TKO-500/600 and 7/16" 3/4" 13/16" MCG61001
Borg-Warner T56 transmissions. Choose 1/2" 3/4" 13/16" MCG61000
from straight or angled, with either polished
or black anodized finish. Sold each. BSP264810 Boost Wheels
Description Polished Black From classic to modern
8" Straight Grid Style Shift Lever BSP264840 BSP264845 muscle, the Pro-Touring Series
10" Straight Outlaw Style Shift Lever BSP266130 is bred for high performance,
10" Straight Grid Style Shift Lever BSP266145 with maximum dish for high-
8" Angled Outlaw Style Shift Lever BSP264810 BSP264815
offset applications. 4-piston
8" Angled Grid Style Shift Lever BSP264820 BSP264825
10" Angled Outlaw Style Shift Lever BSP266110 BSP266115
to monster 6-piston disc
10" Angled Grid Style Shift Lever BSP266120 BSP266125 brakes - everything you’ve
done to turn your car into a
corner carving machine is
welcome here. Choose from
the industry’s best polished
finish or from the custom powder-coated options
available to achieve your own look.
Call for applications.

2023 - 2024 HOT ROD AND EARLY MUSCLE 109

Street Lite Black Speedway Wheels
Anodized Wheel Known for great quality
The Street Lite hard coat at a great price, the Billet
black anodized race wheel Specialties Legends series
resists fading. Outstanding of wheels adds a new
strength-to-weight ratio is style: The Speedway. The
designed to be the ultimate Speedway features one-
street and strip wheel piece cast construction with
carrying the hardcore SFI a polished or titanium center
15.1 certification. 360° and a diamond turned lip to
welded 2-piece lightweight add a modern and stylish
construction with forged alloy rim for strength and touch. Available in 18”, 20”, or 22" sizes, with multiple bolt
superior run-out. Bolt-on center cap included. Lug nuts patterns and backspace options.
sold separately. Back
Size Spacing Bolt Pattern Center Part No.
Back 18 x 7" 4.25" 5 x 4.75" Polished BSPAC39002
Size Spacing 5 x 4.50" BC. Part No. 5 x 4.75" BC Part No.
18 x 7" 4.25" 5 x 4.75" Titanium BSPAC39003
15 x 3.5 1.75" BSPBRS035356517N BSPBRS035356117N
18 x 8" 4.50" 5 x 4.5" Titanium BSPAC39005
15 x 4 1.625" BSPBRS035406516N BSPBRS035406116N
18 x 8" 4.50" 5 x 4.75" Polished BSPAC39006
15 x 4 2.25" BSPBRS035406522N BSPBRS035406122N
18 x 8" 4.50" 5 x 4.75" Titanium BSPAC39007
15 x 7 2.25" — BSPBRS035706145N
18 x 8" 5.25" 5 x 4.75" Polished BSPAC39008
15 x 8 4.5" — BSPBRS035806145N
18 x 8" 5.25" 5 x 4.75" Titanium
15 x 8 5.5" — BSPBRS035806155N
20 x 8.5" 4.75" 5 x 4.75" Polished
15 x 10 5.5" — BSPBRS035106155N
20 x 8.5" 4.75" 5 x 4.75" Titanium BSPAC39017
15 x 10 5.5" — BSPBRDB35106145N *
20 x 8.5" 4.75" 5 x 5" Polished BSPAC39018
17 x 4.5 2.0" BSPRSFB37456520N BSPRSFB37456120N
20 x 8.5" 5.50" 5 x 4.75" Polished BSPAC39020
* Double beadlock wheel. 20 x 8.5" 5.50" 5 x 4.75" Titanium BSPAC39021
20 x 8.5" 5.50" 5 x 5" Polished BSPAC39022
20 x 8.5" 5.50" 5 x 5" Titanium BSPAC39023
20 x 10" 5.50" 5 x 4.75" Polished BSPAC39024
20 x 10" 5.50" 5 x 4.75" Titanium BSPAC39025
20 x 10" 5.50" 5 x 5" Polished BSPAC39026
20 x 10" 5.50" 5 x 5" Titanium BSPAC39027
22 x 10" 5.50" 5 x 4.75" Polished
22 x 10" 5.50" 5 x 5" Polished BSPAC39032

355 Cu. In./390 HP Small Block Chevy Crate Engine

Small block Chevy 355 cu. in. crate engine offers 390 dyno-proven horsepower. Seasoned four-bolt main block incorporates
a cast steel 3.480" stroke crankshaft, OEM connecting rods with 150,000 PSI fasteners, hypereutectic 10.0:1 pistons, and a
hydraulic roller camshaft with 220°/224° duration @ .050" with .495"/.502" valve lift. Block is topped with a set of aluminum
195cc intake runner cylinder heads with 64cc combustion chambers and 2.02" intake/1.60" exhaust valves. Long block
includes valve covers, timing cover, and oil pan. Dressed engine features an aluminum intake manifold, HEI distributor, and
600 CFM carburetor or EFI system.
Note: Engines do have a provision for a mechanical fuel pump. Water pump, flywheel/flexplate, fuel pump, and starter not included.
Part No. Description
355 Cu. In. Small Block Chevy Crate Engine w/600 CFM
BPEBP35513CTC1
Carburetor
355 Cu. In. Small Block Chevy Crate Engine
BPEBP35513CTF1
w/EFI System

355 Cu. In./410 HP Specifications

Displacement 383
Bore x Stroke 4.040" x 3.480"
Horsepower 390
Torque, Ft. Lbs. 410
Valve Lift .495"/.502"
Camshaft Duration 220°/224°
Valve Size 2.020"/1.600"
Compression Ratio 10.0:1

110 2023 - 2024 HOT ROD AND EARLY MUSCLE

496 Cu. In./600 HP Big 383 Cu. In./436 HP
Block Chevy Long Block Small Block Chevy
BPEBP4962CT Stroker Crate Engines
Big block Chevy 496 cu. in. long
block stroker engine assembly
BPEBP38313CT1
delivers 600 dyno-proven Small block Chevy 383
horsepower. Remanufactured cu. in. crate engine
OEM block is assembled using a forged 4.250" stroke offers 436 dyno-proven
crankshaft, OEM connecting rods, hypereutectic 9.6:1 horsepower. All-new
pistons, and mechanical roller camshaft with 242°/248° four-bolt main block incorporates a cast steel 3.750"
duration @ .050" and .566" valve lift. Aluminum 316cc stroke crankshaft, OEM connecting rods with 150,000
intake runner cylinder heads include 2.30" intake/1.88" PSI fasteners, hypereutectic 10.0:1 pistons, and a
exhaust valves and 119cc combustion chambers. hydraulic roller camshaft with 230°/236° duration @
Assembly additionally includes valve covers, oil pan, .050" with .544"/.555" valve lift. Block is topped with a
and timing cover. set of aluminum 195cc intake runner cylinder heads with
75cc exhaust runners, 64cc combustion chambers, and
Notes: Engine does not have a provision for a mechanical fuel pump. Intake manifold, 2.02" intake/1.60" exhaust valves. Fully dressed engine is
carburetor, fuel pump, distributor, spark plug wires, water pump, flywheel/flexplate and starter
not included. drop-in ready and includes an aluminum intake manifold,
496 Cu. In./600 HP Specifications 750 CFM carburetor, HEI distributor, spark plugs and plug
Displacement 496 wires, harmonic balancer, long-style standard rotation
Bore x Stroke 4.310" x 4.250" water pump, and fuel pump. Flywheel/flexplate and
Horsepower 600 starter not included.
Torque, Ft. Lbs. 568 Note: These engines features a true 4 inch bore, which mathematically yields 377 CID with a
Valve Lift .566" 3.75 inch stroke.
Camshaft Duration 242°/248°
Valve Size 2.30"/1.88" 383 Cu. In./436 HP Specifications
Compression Ratio 9.6:1 Displacement 383
Bore x Stroke 4.000" x 3.750"
Horsepower 436
383 Cu. In./436 HP Torque, Ft. Lbs. 443
Small Block Chevy Valve Lift .544"/.555"
Camshaft Duration 230°/236°
Stroker Crate Engines Valve Size 2.020"/1.600"
Small block Chevy 383 cu. Compression Ratio 10.0:1
in. crate engine offers 436
dyno-proven horsepower.
All-new four-bolt main block 400 Cu. In./508 HP
incorporates a cast steel
3.750" stroke crankshaft, OEM connecting rods with
Small Block Chevy
150,000 PSI fasteners, hypereutectic 10.0:1 pistons, and Stroker Crate Engine
a hydraulic roller camshaft with 230°/236° duration @ BPEBP4002CT1
.050" with .544"/.555" valve lift. Block is topped with a set Small block Chevy 400 cu.
of aluminum 195cc intake runner cylinder heads with 75cc in. crate engine offers 508
exhaust runners, 64cc combustion chambers, and 2.02" dyno-proven horsepower.
intake/1.60" exhaust valves. Long block includes valve All-new four-bolt main block incorporates a cast steel
covers, timing cover, and oil pan. Dressed engine adds 3.750" stroke crankshaft, OEM connecting rods with
of an aluminum intake manifold, HEI distributor, and 750 150,000 PSI fasteners, hypereutectic 10.3:1 pistons, and a
CFM carburetor or EFI system. hydraulic roller camshaft with 236°/242° duration @ .050"
Notes: These engines features a true 4 inch bore, which mathematically yields 377 CID with with .555"/.576" valve lift. Block is topped with a set of
a 3.75 inch stroke. Engines do have a provision for a mechanical fuel pump. Water pump, aluminum 220cc intake runner cylinder heads with 67cc
flywheel/flexplate, harmonic balancer, fuel pump, and starter not included.
exhaust runners, 64cc combustion chambers, and 2.08"
Part No. Description intake/1.60" exhaust valves. Long block includes valve
383 Cu. In. Small Block Chevy Crate Engine
BPEBP38318CT1
w/750 CFM Carburetor
covers, timing cover, and oil pan.
383 Cu. In. Small Block Chevy Crate Engine Note: These engines features a true 4 inch bore, which mathematically yields 377 CID with
BPEBP35513CTC1 a 3.75 inch stroke. Engines do have a provision for a mechanical fuel pump. Water pump,
w/750 CFM Carburetor
383 Cu. In. Small Block Chevy Crate Engine flywheel/flexplate, harmonic balancer, fuel pump, and starter not included.
BPEBP35513CTF1
w/EFI System
383 Cu. In./436 HP Specifications 400 Cu. In./508 HP Specifications
Displacement 383 Displacement 400
Bore x Stroke 4.000" x 3.750" Bore x Stroke 4.125" x 3.750"
Horsepower 436 Horsepower 508
Torque, Ft. Lbs. 443 Torque, Ft. Lbs. 473
Valve Lift .544"/.555" Valve Lift .555"/.576"
Camshaft Duration 230°/236° Camshaft Duration 236°/242°
Valve Size 2.020"/1.600" Valve Size 2.080"/1.600"
Compression Ratio 10.0:1 Compression Ratio 10.3:1
2023 - 2024 HOT ROD AND EARLY MUSCLE 111
509 Cu. In./640 HP Pro 376 Cu. In./530 HP
Series Big Block Chevy Pro Series Big Block
Crate Engine Chevy Crate Engine
BPEPS5091CT BPEPSLS3760CTF
Big block Chevy 509 cu. in. LS-Series Chevy 376 cu.
crate engine offers 640 in. crate engine offers
dyno-proven horsepower 530 dyno-proven! All-new
and a massive 605 ft.-lbs. aluminum GM six-bolt
of torque! All-new four-bolt main block with standard deck height has a 4.060" bore, a
main block with standard forged steel 3.622" stroke crankshaft, 3.095" connecting
deck height has a 4.500" bore, a forged steel 4.000" rods with 150,000 PSI fasteners, hypereutectic 10.1:7
stroke crankshaft, forged H-beam connecting rods pistons, and a hydraulic roller camshaft with 225°/238°
with 150,000 PSI fasteners, forged 10.1:1 pistons, and a duration @ .050" with .612"/.585" valve lift. Block is topped
hydraulic roller camshaft with 248°/254° duration @ .050" with a set of aluminum 259cc intake runner cylinder
with .647"/.647" valve lift. Block is topped with a set of heads with 102cc exhaust runners, 72cc combustion
aluminum 316cc intake runner cylinder heads with 124cc chambers, and 2.165" intake/1.600" exhaust valves.
exhaust runners, 119cc combustion chambers, and 2.30" Dressed engine includes valve covers, timing cover,
intake/1.88" exhaust valves. Long block includes valve harmonic balancer, GM Musclecar swap oil pan, water
covers, timing cover, harmonic balancer, and oil pan. pump, DBW throttle body, loaded intake manifold, fuel
Notes: Engines do have a provision for a mechanical fuel pump. Water pump, flywheel/ injectors, coil packs, spark, plugs, and plug wires.
flexplate, fuel pump, and starter not included. Notes: Engine does have a provision for a mechanical fuel pump. Flywheel/flexplate, fuel pump,
and starter not included. Engine is not shipped with an engine controller kit.
509 Cu. In./640 HP
Specifications 376 Cu. In./530 HP Specifications
Displacement 509 Displacement 376
Bore x Stroke 4.500" x 4.000" Bore x Stroke 4.060" x 3.622"
Horsepower 640 Horsepower 530
Torque, Ft. Lbs. 605 Torque, Ft. Lbs. 495
Valve Lift .647"/.647" Valve Lift .612"/.585"
Camshaft Duration 248°/254° Camshaft Duration 225°/238°
Valve Size 2.300"/1.880" Valve Size 2.165"/1.600"
Compression Ratio 10.1:1 Compression Ratio 10.7:1

408 Cu. In/450 HP Assembled

Small Block Ford Crate Cylinder Head for
Engines Small Block Ford
Small block Ford Windsor 408 BPEHP9009
cu. in crate engines provide 450 Fully assembled
dyno-proven horsepower. Crate Muscle Series cylinder
engines are assembled using a head is designed to
seasoned two-bolt main block maximize output without breaking the bank! Lightweight
that is fitted with a cast steel 4.000" stroke crankshaft, aluminum heads come fully assembled with heavy-duty
forged I-beam connecting rods, forged pistons, and components including 2.02" intake/1.60" exhaust valves,
a hydraulic roller camshaft with 236°/248° duration 1.437" dual valve springs, retainers, locks, guideplates,
@ .050" with .579"/.579" valve lift. Engines are topped studs, and seals. Standard intake ports with 190cc intake
with aluminum cylinder heads with 60cc combustion runner, 65cc exhaust runners with square port exhaust,
chambers and 2.02" intake/1.60" exhaust valves. Long and 60cc combustion chambers combine to improve
block includes valve covers, timing cover, and oil pan. power and flow. Sold individually.
Dressed engine includes the addition of an aluminum
intake manifold, distributor, and carburetor.
Small Block Chevy
Notes: Engines do have a provision for a mechanical fuel pump. Water pump, flywheel/
flexplate, fuel pump, and starter not included. Harmonic Balancer
Part No. Description BPEBPP400L
BPEBPF4089CT 408 Cu. In. SB Ford Long Block
Designed for Blueprint 383 cu. in.
BPEBPF4089CTC 408 Cu. In. SB Ford Dressed Crate Engine
stroker engines and other crate
408 Cu. In./425 HP Specifications
engines requiring a 400 cu. in.
Displacement 408
balancer, this external balance
Bore x Stroke 4.000" x 4.000"
harmonic balancer measures
Horsepower 450
8" in diameter. Black zinc finish
Torque, Ft. Lbs. 475
with degree marks. Not SFI
Valve Lift .579"/.579"
certified.
Camshaft Duration 236°/248°
Valve Size 2.02"/1.60"
Compression Ratio 9.8:1
112 2023 - 2024 HOT ROD AND EARLY MUSCLE
Shot Premium Octane Booster
This small bottle of octane booster is designed Formulated to increase octane levels up to 100.
for daily driver applications and is capable of Street-legal for nonracing vehicles when high-
increasing pump fuel between 2 and 3 octane octane fuel is not readily available.
numbers. Just empty the four-ounce bottle Part No. Description
into the fuel tank. The ideal solution for lower- BOOOCT16PRE-1 16-oz. Bottle
compression automotive powerplants and two- BOOOCT16PRE Case of 10 16-oz. Bottles
stroke engines when looking to quickly treat BOOOCT16PREBLK Carton of 36 16 oz. Bottles
poor quality fuel.
Part No. Description
BOOOCT04SHOT 4-oz. Bottle Professional Octane Booster
BOOOCT04SHOT10 Case of 10 4-oz. Bottles Formulated to increase octane levels up to 116.
BOOOCT04SHOT100 Carton of 100 4-oz. Bottles This is a racing only octane additive. Not legal
for street-use.
Part No. Description
BOOOCT32PRO-1 32-oz. Bottle
BOOOCT32PRO Case of 6 32-oz. Bottles
BOOOCT32PROBLK Carton of 20 32-oz. Bottles

Single Steering Vibration Reduction Universal Joints

Universal Joints On vibration reduction joints,
Steel the spline size of the reduction
Box/
Column Shaft Part No. end is listed first, followed by the
Steel spline of the yoke.
9/16"-26 3/4" BRG010964 Part No. Description
5/8"-36 3/4" BRG011864 BRG153449 3/4" DD x 3/4"-30, Stainless
11/16"-36 3/4" BRG012564 BRG154952 3/4" DD x 1" DD, Stainless
11/16"-40 3/4" BRG014928 Polished BRG164952 3/4" DD x 1" DD, Polished Stainless
3/4"-30 3/4" BRG013164 Stainless
Stainless Steel BRG033434 3/4"-36 x 3/4"-36, Steel
3/4" DD 3/4" BRG014964 Steel
BRG034934 3/4" DD x 3/4"-36, Steel
3/4" 3/4" BRG016464 BRG034949 3/4" DD x 3/4" DD, Steel
3/4"-36 3/4"-30 BRG013431 Box/ BRG034952 3/4" DD x 1" DD, Steel
3/4"-36 11/16"-36 BRG013425 Shaft Part No.
Column BRG034931 3/4" DD x 3/4-30, Steel
3/4"-36 3/4"-20 BRG013430 Stainless Steel BRG034940 3/4" DD x 3/4-36, Steel
3/4"-36 3/4"-36 BRG013434 3/4"-36 3/4"-36 BRG113434 BRG034943 3/4" DD x 1"-48, Steel
3/4"-36 13/16"-36 BRG013440 3/4"-36 3/4" DD BRG113449
3/4"-36 3/4" DD BRG013449 3/4" DD 9/16"-26 BRG114909
3/4"-36 1" DD BRG013452 3/4" DD 9/16"-36 BRG114912
Steel Coupler
3/4" 3/4" 3/4" DD 5/8"-36 BRG114918 Part No. Description
BRG516464 Chrysler to Borgeson Power
Smooth Smooth 3/4" DD 3/4" DD BRG114949 BRG036425
3/4" DD 11/16"-36 BRG014925 3/4" DD 13/16"-36 BRG114940 Steering Box
3/4" DD 9/16"-26 BRG014909 1"-48 3/4" DD BRG114349 BRG315249 3/4"DD x 1" DD
3/4" DD 5/8"-36 BRG014918 Polished Stainless Steel BRG311800 5/8"-36 x 3/4" Smooth Bore
3/4" DD 13/16"-36 BRG014940 3/4"-36 3/4"-36 BRG123434 BRG311200 9/16"-36 x 3/4" Smooth Bore
3/4" DD 3/4" DD BRG014949 3/4"-36 3/4" DD BRG123449 BRG313100 3/4"-30 x 3/4" Smooth Bore
1" DD 3/4"-30 BRG015231 3/4" DD 9/16"-26 BRG124909 BRG313400 3/4"-36 x 3/4" Smooth Bore
1" DD 3/4" BRG015264 3/4" DD 3/4" DD BRG124949 BRG313449 3/4"-30 x 3/4" DD
1" DD 1" DD BRG015252 3/4" DD 1" DD BRG124952 BRG314900 3/4"DD x 3/4" Smooth Bore
1"-48 3/4"-36 BRG014334
1"-48 3/4" DD BRG014349
1"-48 1" DD BRG014352
Pin and Block Universal Joints
Part No. Description
Steel
Steel Double Steering BRG510964
1" O.D., 9/16"-26 Spline x 3/4"
Smooth
Universal Joints 1" O.D., 1/2" Smooth x 1/2"
BRG515959
Box/ Smooth
Shaft Part No.
Column
3/4"-36 3/4"-36 BRG023434
3/4" DD 3/4" DD BRG024949
3/4" DD 1" DD BRG024952

2023 - 2024 HOT ROD AND EARLY MUSCLE 113

Rag Joints Collapsible Steel Steering Shaft
On older factory applications, a flexible BRG460018
coupling was used to attach the
column to the steering box when there
was perfect alignment. If the original
column or box is changed, the stock Designed to collapse in the event of a collision, this steel
coupling may not work. Rag joints are shaft features a 1" DD end and a 3/4" DD end. Total length
only available in steel. is 18-1/2".
Part No. Description
BRG053152
BRG053449
3/4"-30 Spline x 1" DD
3/4"-36 Spline x 3/4" DD
Application-Specific Telescopic Steel
BRG054052 1" DD x 13/16"-36 Steering Shafts
BRG055043 18mm DD x 1"-48 Spline
BRG055049 18mm DD x 3/4" DD

Half Rag Joint Steering Coupler

BRG990014 Part No. Description
For GM 1978-88 G-body/1982-92 F-body/1978-93 compact
Half rag joint steering coupler includes BRG000315
trucks/SUVs.
the steering box side and rubber disc BRG000932 For 1973-76 GM full-size trucks/SUVs.
with hardware. Fits 3/4"-36.
BRG000933 For 1977-78 GM full-size trucks/SUVs.
BRG000943 For 1979-93 Dodge Ram trucks.
Steel Splined Shafts BRG000976 For 1973-75 Ford Bronco w/power steering.
Shafts are splined 2" on each
end.
Ford Drag Link Adapter
Part No. Description
BRG409206 3/4"-36 x 6" Long BRG990004
BRG409208 3/4"-36 x 8" Long Manual Drag Link adapter. Replaces
BRG409212 3/4"-36 x 12" Long control valve with factory-style
BRG409216 3/4"-36 x 16" Long power steering. Applications include
1961-64 Full Size, 1962-65 Fairlane,
Steel Double “D” Shafts and 1963-65 Falcon and Ranchero. An inner collar
Part No. Description pivots to accommodate any floor angle.
BRG409418 3/4" DD x 18" Long
BRG409436 3/4" DD x 36" Long
Billet Smooth Column Drops
Mount the column where it is most comfortable.
3/4" DD x 22" Long Polished Stainless Steel Drops are machined from aluminum billet. An
Double “D” Shaft adjustable swivel compensates for differing
dash and column angles.
BRG429422
Part No. Diameter/Drop
BRG911202 2" x 2", Polished
BRG911203 2" x 3", Polished
BRG911204 2" x 4", Polished
Telescopic Steel Steering Shafts
Part No. Description 1955-57 Chevy Pivoting
BRG450024 24" Fully Extended Aluminum Floor Mounts
BRG450036 36" Fully Extended Chevys built between 1955 and 1957 have a
large, irregular shaped hole in the firewall
Steering Shaft Supports which makes mounting a later model
Weld-on steering shaft supports are 2-1/2" steering column difficult. The Mullins
long with a 3/4" I.D. spherical bearing. Billet pivoting polished aluminum mount bolts to existing bolt
Steel, 3/4" I.D. holes in the floor and neatly and securely mounts the
Part No. Description
bottom of a 2" diameter column. The mount’s center ring
BRG670000 Weld-On Steering Shaft Support, Natural Steel
swivels for easy alignment.
Part No. Description
Steering Shafts BRG909011 Machine Finish
BRG909012 Polished

Part No. Description

BRG000655 Steel, 1979-93 Mustang with Manual Steering
BRG000656 Steel, 1979-93 Mustang with Power Steering
BRG419436 Stainless Steel, 3/4" DD, 36"
BRG429436 Stainless Polished, 3/4" DD, 36"

114 2023 - 2024 HOT ROD AND EARLY MUSCLE

Solid or Split Floor Column Mount 1955-57 Chevy
Solid, full-circle mount slides over Power Steering
the end of the steering column and
secures the column to the floor. An
Conversion
inner collar pivots to accommodate Borgesion offers a genuine
any floor angle. Split mount separates Delphi 600 based 1955-57
into two halves to clear the column full-size Chevy power steering
shift lever and can also be installed on a column already conversion box. A remanufactured
in the vehicle. Both mounts are machined from solid Delphi 600 steering box features a
aluminum and can be ordered in machined or polished 1-piece case with proper mounting tabs
finishes. to attach directly to the factory mounting
position and a machined sector shaft to
Part No. Description
fit the stock Pitman arm. Offers true modern steering
BRG909004 Swivel Floor Mount, 2"
BRG909008 Split Swivel Floor Mount, 2"
feel with a variable ratio that offers slower speed turning
for stable highway driving and quicker turning for easy
parking and low-speed maneuverability.
Saginaw 700 Variable Ratio Power Steering Box
Part No. Description
BRG800130 Bolt On Delphi 600 Power Conversion Box
BRG800105
Brand new variable ratio for 1955-1957 Chevys
box has a quick ratio for BRG990008
Replacement Column Shaft
easy parking and low-speed for Maintaining Factory Column
Rag Joint Required for Installation
cruising and a slower ratio BRG055052
with Aftermarket Column
for highway driving. Box has Rag Joint for Use of Original Column
3/4"-30 spline and is covered BRG055034
and BRG990008 Column Shaft
by a 3-year warranty. 1955-57 Chevy Column Floor Mount.
BRG909012
Seals Large Irregular Hole and Secures Column Base
Power to Manual Conversion Kits
Each conversion kit contains
a 525 box, Pitman arm, and Saginaw 525
half rag joint. Quick-ratio Manual Steering Box 16:1
steering boxes are also New OEM Saginaw 525
available. steering box manufactured
Part No. Description Borgeson. 3/4"-36 spline input shaft.
1978-88 Malibu, Part No. Description
BRG999001
1982-92 Camaro BRG920040 16:1 Ratio
1970-81 Camaro, 1" Shortened Input Shaft
BRG999003 BRG920011
1975-79 Nova for Street Rods
BRG999004 1968-72 Chevelle, 442, GTO

Saginaw/Delphi 700
OEM Saginaw for 1968-82
Manual Steering Box
Corvette Steering Manual Box Borgeson remanufactured
BRG920038 Saginaw 700 steering box.
This box has a 16:1 ratio and 3/4"-30 spline 3-bolt steering gear. Will bolt
input shaft. A true direct replacement to any 4-bolt Saginaw 700 location.
steering gear for your 1968-82 Corvette. Cars built before 1970 may need a new
rag joint connector. This box will install with either flare
or O-ring hoses with the included adapters. 3/4"-30 spline
input shaft.
Part No. Description
BRG800130 14:1 Ratio
BRG800130 12.7:1 Ratio
GM Vega 140
Manual Steering Box 22:1 GM 525 Manual Steering Box
BRG920004 BRG920010
Remanufactured original Vega A brand new, OEM GM steering
140 steering box. Features an all box. Uses the same
original Vega case and internals. three-hole mounting
22:1 ratio. pattern as the Vega box,
but is beefy enough for
cars weighing more
than 2,500 pounds, especially in 1934
and earlier rods with limited space in the
engine compartment.

2023 - 2024 HOT ROD AND EARLY MUSCLE 115

1967-77 Ford Mid-Size 1963-82 Corvette Modern
Power Steering Conversion Power Steering Conversion
Kit includes power Modern integral
steering box, half power steering
rag joint, drag conversion
link adapter, and kits utilize fully
power steering remanufactured
hose kit. Fits small Delphi 600
block and big block gearboxes, and
Ford applications provide advanced
including 1967-70 power steering
Fairlane, 1967-70 feel, better
Falcon and Ranchero, 1970- response, and a
77 Maverick, and 1968-71 Torino. sporty 12.7:1 turns
Part No. Description ratio. Gear boxes
With Factory Bendix Power Steering are engineered
BRG999053
and Collapsible Steering Column to bolt directly to the OEM mounting location and fit
BRG999052 With Manual Steering and Collapsible Steering Column the stock Pitman arm. Each kit is sold complete with all
hardware and complete instructions.
1958-64 Chevy Car Power Steering Box Part No. Description
Power steering BRG999016 1963-66 Corvette, Small Block, OEM Manual Steering
conversion for 1958-64 BRG999017 1967-82 Corvette, Small Block, OEM Manual Steering
full size Chevys. The BRG999031 1963-66 Corvette, Small Block, OEM Power Steering
Borgeson conversion box BRG999032 1967-82 Corvette, Small Block, OEM Power Steering
is a remanufactured GM Note: The OEM steering column will need to be collapsed or shortened approximately 2-1/2" for
necessary clearance.
Delphi 600 integral power
steering gearbox. The
Delphi 600 represents 1965-66 Mustang
the latest generation of
integral power steering
6-Cylinder
gearbox technology with true modern power steering Power Steering
feel, feedback and a quick 14:1 ratio. Bolts directly to the Conversion
factory mounting location and fits the stock Pitman arm.
A new universal joint and steering shaft will be required BRG999026
for connection to the stock column. Cars with factory Kit fits 1965-
power steering will require a drag link adapter or a manual 66 manual
centerlink. steering Mustang
applications. Will not fit factory Z-Bar clutch linkage.
Requires 2-row crank and water pulleys. Will fit 1967
Power Steering Conversion Box and Mustang with 1" pitman shaft.
Accessories
Part No. Description
1958-64 Chevy Remanufactured Delphi 600,
Complete Conversion Kit
BRG800106
Power Conversion Box for 1958-64 Chevy, SBC/SWP
1958-64 Chevy Manual Drag Link Adapter
BRG990007
Cars with Factory Power Steering BRG999014
Steering Shaft, 3/4"-36 Spline Connects BRG013446 Joint to Includes re-
BRG409216
Stock Column manufactured Delphi
BRG925103 Two-Piece Rubber P/S Hose Kit, GM Pump to GM Box 600 power steering box,
BRG800310 GM Power Steering Pump with Keyway P/S pump,pump bracket,
BRG801001 P/S Pump Pulley GM 2-Row Keyway Style P/S pulley, universal
BRG802400 P/S Pump Bracket, Steel, SBC/SWP
joint, and shaft. For cars
BRG802402 P/S Pump Bracket, Steel, SBC/LWP
with a SBC/SWP and a
3/4"-36 spline column.

116 2023 - 2024 HOT ROD AND EARLY MUSCLE

1965-70 Mustang Modern Self-Contained Saginaw GM
Power Steering Conversion Power Steering Pump
Update classic Remanufactured GM pump is
Mustangs completely self-contained, a bonus for
to modern, limited space situations. Two versions
integral power are available: one is completely stock
steering for for use with GM rack and pinion, the
improved other has the flow control valve reset
steering feel, for compatibility with Mustang II rack
better response and pinion steering.
and a sporty, Part No. Description
16:1 ratio. Kits include fully remanufactured, modern BRG800310 Black Pump with Keyway, Stock GM Rack and Pinion
Delphi 600 power steering gear boxes, which bolt directly BRG800311 Chrome Pump with Keyway, Stock GM Rack and Pinion
to the OEM mounting location and accept the factory BRG800312
Black Pump with Keyway,
Pitman arm. Kits are sold complete with necessary Preset for Mustang II Rack and Pinion
Pressure Reduction Kit,
hardware and complete instructions. BRG899001
GM Pump to Mustang II Rack and Pinion
Part No. Description
BRG999020 1965-66 Mustang 289-351W, OEM Manual Steering
BRG999021 1968-70 Mustang 289-351W, OEM Manual Steering
Power Steering Pump
BRG999023 1965-66 Mustang 289-351W, OEM Power Steering for Hydro-Boost
BRG999024 1968-70 Mustang 289-351W, OEM Power Steering
Related Components/Accessories
Brake Applications
BRG800110 Power Steering Conversion Box, 1" Sector Shaft BRG800323
BRG800111 Power Steering Conversion Box, 1-1/8" Sector Shaft Black powder-coated self-contained power
BRG990003 Drag Link Adapter for ’67-70 Mustang steering pump has two returns for hydro-
BRG990050 1965-66 Mustang Manual Drag Link boost and features a press-on shaft. Pump
1965-66 Mustang V8 Clutch Linkage for Borgeson
BRG990051
Gear Box
pressure is 1450-1550 PSI with a 3.0-3.5 GPM
flow rate.
Notes: The OEM steering column will need to be collapsed or shortened 1"-2" for necessary
clearance. Factory power steering applications will require either manual drag link BRG990050
or drag link adapter BRG990003. 1967 Mustang owners will need to measure that the sector Power Steering Pump Upgrade
shaft is 1" or 1-1/8" prior to purchase. Power steering conversion boxes are not compatible with
OEM Z-bar clutch linkage; use BRG990051 for kit installation. for Ford Y-Block 292/312
BRG800335
1962-82 Mopar This Saginaw power steering pump
Power Steering Conversion upgrade fits Ford 292/312 Y-block.
Kit includes Saginaw P/S pump,
BRG800126 bracket, pulley, and hardware.
The conversion box for 1962-82 Requires use of proper crank and water pump
MOPARs fits both factory power and pulleys for power steering applications.
manual steering applications increases header
clearance and is ten pounds lighter than the
factory unit. The box bolts directly to the stock 1963-77 Ford Mid-Size Power Steering
K-member mounting and uses original 1-1/8" Conversion Box
pitman arm. 14:1 ratio. The steering column BRG800114
must be shortened. Power steering conversion for the
Notes: The original steering column must be cut and shortened for installation. Connection to 1963-77 Ford and Mercury mid-
the box is made by drilling and pinning BRG036425- MOPAR vibration reducing U-joint to the
shortened steering shaft. Drill bit and pins included.
size cars with 1-1/8" sector shaft
offers a remanufactured modern
steering box with a 11/16"-36 spline
1962-66 Chevy II Nova Power input shaft and a 16:1 ratio. Steering
Steering Conversion Box column modification required.
BRG800117
The remanufactured modern power 1963-82 Chevy Corvette Power Steering
steering gearbox for 1962-77 Chevy Conversion Box
II Nova has an 11/16"-36 spline input
shaft/ 16:1 ratio. Steering column
BRG800108
modifications required for installation. Remanufactured Delphi 600 series
power steering box for 1963-82
Notes: Power conversion box is intended for use with stock column. Floor Chevy Corvettes has a 18mm
shift applications only. Any stock column can be modified to fit our box,
however column shift is not possible with added length of steering box. Double-D input shaft and 12.7:1
Borgeson column shaft BRG990041 is recommended for installation. ratio. Steering column modifications
required.

2023 - 2024 HOT ROD AND EARLY MUSCLE 117

1966-77 Ford Bronco Integral Power Steering 1949-51 Mercury Car Power Steering Box
Conversion Box BRG800131
BRG800125 Upgrade to power steering on
The conversion box for 1966-77 1965-77 Ford, Lincoln, and Mercury
Ford Broncos utilizes a modern full-size cars, or replace the
integral steering box for improved vague factory power steering. The
steering feel and feedback, and a Borgeson upgrade box mounts to
quicker 14:1 ratio. Designed to bolt the factory location, and includes a
directly to the factory location and Pitman arm to connect to the factory
work with the stock pitman arm. linkage without modifications to the
Requires use of a new universal frame. Modern box design provides
joint to connect to the stock column, and a new power true modern power steering feel and
steering pump hose kit. Features a 11/16"-36 spline input feedback, and a quick 14:1 ratio. Bolts
shaft, a stock Ford 1-1/4"-32 Pitman shaft, and 14mm x 1.5 directly to the factory mounting location and fits
top seal O-ring pressure and return ports. the stock steering linkage without modifications.
Has 11/16"-36 spline input shaft.
Note: The factory column will need to be shortened, and cars with factory power steering will
1965-79 Mopar require either a drag link adapter or a manual steering center link. Not recommended for use
Power Steering Conversion Box on cars with 3-speed manual column shift.

BRG800127
The conversion box for 1965-79
1968-86 GM Full-Size Truck Power Steering Box
MOPARs fits both factory power BRG800132
and manual steering applications, The Borgeson Street
drastically increases header and Performance power
clearance, and is ten pounds steering box provides
lighter than the factory unit. The improved feel and a quick
box bolts directly to the stock 12.7:1 ratio to 1968-86
K-member mounting and uses C-series trucks as well
original 1-1/4" pitman arm. 14:1 ratio. as 87-91 R-series trucks.
Use of a power steering cooler The Borgeson upgrade box mounts to the factory location
is recommended. The steering and fits the factory power steering Pitman arms. Trucks
column must be shortened. upgrading from manual steering will require a new power
Notes: The original steering column must be cut and shortened for installation. Connection steering Pitman arm. and feedback, and a quick 14:1 ratio.
to the box is made by drilling and pinning BRG036425 MOPAR vibration-reducing U-joint to the Bolts directly to the factory mounting location and fits
shortened steering shaft. Drill bit and pins included with coupler. the stock steering linkage without modifications. Has
11/16"-36 spline input shaft.
1965-77 Ford Full-Size Car Power Steering Box Note: The factory column will need to be shortened, and cars with factory power steering will
require either a drag link adapter or a manual steering center link. Not recommended for use
BRG800128 on cars with 3-speed manual column shift.
Upgrade the power steering
on 1965-77 Ford, Lincoln, and
Mercury full-size cars. The
Power Steering Pump for
Borgeson upgrade box is a 1994-2002 Dodge Ram Trucks
new GM Delphi 600 integral with Cummins Diesel
power steering gearbox that
provides true modern power BRG800328
steering feel and feedback, Black powder-coated self-
and a quick 14:1 ratio. Bolts contained p/s pump with two
directly to the factory mounting location and fits the returns for hydro-boost or vacuum
stock steering linkage without modifications. A new brake applications, and a press-on
factory steering coupler will be required for connection shaft. Pump pressure is 1450-1550
to the input shaft. PSI with a 3.5 GPM flow rate.

Billet Smooth Column Drops

Mount the column where it is most
comfortable. Drops are machined from
aluminum billet. An adjustable swivel
compensates for differing dash and column
angles.
Part No. Diameter/Drop
BRG911202 2" x 2", Polished
BRG911203 2" x 3", Polished
BRG911204 2" x 4", Polished
BRG911205 2" x 5", Polished

118 2023 - 2024 HOT ROD AND EARLY MUSCLE

Saginaw Manual Steering Box Power Steering
for 1963-67 Corvette Conversion Kit for
BRG920039 1962-72 Mopars
New OEM Saginaw steering box Power steering
manufactured by Borgeson is a direct conversion/upgrade
replacement for the original Corvette kits for 1962-72 Mopars
unit. Features a 16:1 ratio and 3/4"-36 include a 14:1 quick ratio
spline input shaft. steering box, pump,
bracket, pulley, hoses,
and steering column
Complete Conversion Kit for 1955-57 Chevy, 1" adapter. Available with for both small block 318/340/360
and 383/440 big block engines.
DD Column and SBC/SWP Part No. Description
BRG999006 BRG999063 P/S Conversion Kit for 1962-72 Small Block Mopars
Includes Borgeson Delphi 600 power BRG999065 P/S Conversion Kit for 1962-72 Big Block Mopars
steering box, P/S pump, pump bracket, Note: Big block kit does not fit with factory air conditioning.
P/S pulley,rag joint, and P/S hoses, and
economy steering column floor mount.
For cars with a SBC/SWP and a 1"DD Mopar 318/340/360 Saginaw Power Steering
column. Pump Bracket
BRG802412
Power steering pump
Power Steering Conversion Kit bracket for attaching
for 1958-64 Chevy a Saginaw-style power
BRG999015 steering pump to small
block Mopar 318/340/360 motors. Includes bracket
Includes Borgeson Delphi 600 power
and hardware for both Metric and SAE Saginaw self-
steering box, steering shaft, and
contained P/S pumps. Pump must have two mounting
universal joint for 3/4"-36 spline
locations on back of reservoir.
column.

Quick Ratio Power Steering Kit for 1968-70

Mustang with Inline 6 Cylinder Power Steering Hose Kits
BRG999025 Original equipment style rubber hose kits for
Includes all necessary parts Borgeson power steering systems.
for conversion to a 14:1 Part No. Description
quick ratio power steering. Two-Piece, GM Self-Contained Pump to 1974-78
BRG925101
For 1968-70 Mustang with Mustang II Rack
200/250 cu. in. I-6 engine. BRG925102
Two-Piece, GM Self-Contained Pump to 1979-97
Mustang Rack
Note: Will not fit applications with factory Z-Bar
BRG925103 Two-Piece, GM Self-Contained Pump to GM Box
clutch linkage.

Power Steering Conversion Kit for 1949-51 Ford Remote Pump Pulleys
Cars And Accessories
Part No. Description
BRG999062 BRG800600
Polished Remote Power Steering
System replaces the stock Reservoir
manual box with a bracket BRG800601
Machined Remote
Power Steering Reservoir
that bolts to the original
Power Steering Pump Pulley, 4-5/8",
frame, and includes a Pitman BRG801202
1-Row, Keyway
arm compatible with the BRG801202
stock steering linkage as well
as some popular aftermarket Press-On Style Shaft GM
upgrades. Works with Power Steering Pump
conventional GM and Ford power steering pumps that can BRG800329
provide the recommended 1100-1250 psi and a flow rate of
Saginaw self contained power steering
2.0-2.5 gpm. Features an 11/16"-36 spline input shaft.
pump with press-on shaft features a
Note: Not recommended for use with Ford flathead engines. straight return tube and steel V-belt
pulley. Preset for standard GM pressure.

2023 - 2024 HOT ROD AND EARLY MUSCLE 119

PR0XS T-304 STainless oval performance mufflers
T-304 stainless steel construction resists rust and is 100% welded for strength.
The free-flow design maximizes performance and is reversible for installation
flexibility. Recommended for car, SUV, and truck applications.
Part No. Inlet Dia. Outlet Dia. Configuration Body Dim. & Body Length
BOR40659 2-1/2" 2-1/2" Center / Offset 4-1/4" x 7-7/8", 14" L
BOR40358 2-1/2" 2-1/2" Center / Offset 4" x 9-1/2", 14" L
BOR40359 3" 3" Center / Offset 4" x 9-1/2", 14" L
BOR40349 3" 2-1/2" (2) Center / Dual 4" x 9-1/2", 19" L

14” Billet Aluminum Billet

Shift Levers Shift Bezels
Bowler’s 14” billet aluminum shift levers have a CNC-machined
19° kickback, and are available in three different from billet 6061
styles. Designed to be a perfect fit for Tremec aluminum with
transmissions, they are a direct bolt-on for the black leather-
TKO-500, TKO-600, and T-56 with standard two- like boots, Bowler shift bezels look great and are easy
bolt flange. They feature .890” center-to-center to install. They include a billet lower mounting plate,
3/8” mounting holes and a 3/8-16 threaded stud billet top ring, boot, 8 stainless steel screws (2mm Allen
with half-nut for shift knob (knob not included). wrench required, not included), and 4 mounting bolts, and
Mounting hardware included. 4 clamp plates. Available in rectangular or round base,
Part No. Style Finish with raw aluminum or black anodized finish.
BOW6014190 Industrial Pocket Raw Aluminum Part No. Style Finish
BOW6014193 Aviation Style Raw Aluminum BOW6210001 Round Black Anodized
BOW6014191 Industrial Pocket Black Anodized BOW6014190 BOW6211000 Rectangular Raw Aluminum
BOW6014194 Aviation Style Black Anodized

Crossmembers for 1967-69

T-56 Transmission Tunnel
Camaro/Firebird 1968-72 Nova
for 1967-69 Camaro
BOW4206769
Designed to provide
the proper driveline
angle when installing
a T-56 transmission
in a 1967-69 Camaro,
this high-quality sheet
steel transmission tunnel This tubular steel crossmember allows use of the popular
features rolled reinforcement Tremec transmissions with small block Chevy, LS, or
beads and the increased height big block Chevy engines in the 1967-69 GM F-body and
to ensure the necessary clearance. 1968-72 Nova. Designed to work with either the factory or
Weld-in installation. a DSE subframe, they accommodate stock or ½-height
body bushings and up to 3” dual exhaust. Black powder-
coated steel, mounting hardware included.
Part No. Transmission Engine
BOW4601006 T-56 Magnum Small Block Chevy/LS
BOW4601008 TKO 500/TKO-600/700R-4 Small Block Chevy
BOW4601009 TKO 500/TKO-600/700R-4 Big Block Chevy

120 2023 - 2024 HOT ROD AND EARLY MUSCLE

Lock-Up Control Modules
Available for 700-R4 and 200-R4 automatic transmissions, Bowler Performance lock-up
control modules provide an easy-to-install solution to control torque converter lock-up.
Designed to lock 8-10 seconds after 4th gear engagement, they improve engine performance
and offer a better feel for lock-up. Powered by one fused two-amp, 12-volt wire, it has an
integrated GM 4-prong connector on the control board, with no vacuum connections required.
Kit includes control module, internal wiring harness with lock-up solenoid, pressure switch,
pan gasket, new transmission filter, and a brake light switch.
Part No. Description
BOW5102000 Lock-Up Control Module for 200-R4 Transmission
BOW5107000 Lock-Up Control Module for 700-R4 Transmission

Universal Fire Extinguisher Bracket

BRTUFEB1317/D
A universal fire extinguisher bracket designed to work with almost any late model or
classic vehicle, no drilling required. From street rods and sports cars to off-road trucks,
daily drivers, and even commercial vehicles, The Bracketeer allows drivers to keep a fire
extinguisher readily at hand for emergencies.

No-Weight Batteries
AGM-style batteries use high-density oxide for true deep-cycling and the heavy-duty,
vibration-resistant power posts will not crack or deteriorate.
Pulse Cranking Cold Cranking
Standard Dimensions Cranking Amps Amps
Part No. Weight (L x W x H) Amps @ 32°F @ 0°F
BRBB106 6.6 lbs. 5.8" x 3.4" x 4.1" 527 283 210
BRBB129 9.5 lbs. 5.8" x 3.4" x 5.1" 813 436 323
BRBB14115 11.5 lbs. 5.8" x 3.4" x 5.8" 904 486 360
BRBB2015 15 lbs. 6.8" x 3.4" x 6.1" 1067 574 425
BRBB2317 17 lbs. 6.8" x 4" x 6.1" 1191 641 475
BRBB2317RP* 17 lbs. 6.8" x 4" x 6.1" 1191 641 475
BRBB3121 21 lbs. 6.6" x 5.2" x 6.8" 1380 742 550
* Battery includes right-side positive terminals, which allows for side-by-side configuration when used with BRBB2317.
Battery Mount Kits
Quickly and easily install Braille No-Weight battery with traditional, or lay down
aluminum mounts.
Part No. Description
BRB211 Conventional Battery Mount for B106/B106C, B14115/B14115C, B2015/B2015C
BRB1018 Laydown Battery Mount for B106/B106C
BRB1218 Laydown Battery Mount for B129
BRB1418 Laydown Battery Mount for B14115/B14115C
BRB1821 Universal Battery Mount Kit, Hold-Downs and 10" J-Hooks
BRB2018 Laydown Battery Mount for B2015/B2015C
BRB2318 Laydown Battery Mount for B2317/B2317R
BRB3118 Laydown Battery Mount for B3121/B3121C

2023 - 2024 HOT ROD AND EARLY MUSCLE 121

Electronic Battery Charger
BRB1232
Safe, reliable electronic charger will extend the life of Braille or other 12-volt
batteries. Battery charger has easy-to-read LED charging indicators, reverse
polarity protection and heavy-duty cables with alligator clips. Compatible with dry
cell, AGM, gel, and flooded lead-acid batteries.

CCD20080R

CCD62442

California Car Duster Products

Part No. Description
CCD62442 The Original California Car Duster—Wood Handle
CCD62443 The Original California Car Duster—Plastic Handle
CCD62445 Auto Detailing Kit with Plastic Handle Car Duster and Dash Duster Bagged
CCD62448 Dash Duster, Plastic Handle, Clam Shell CCD62443
CCD62557 Super Duster with 30" Wood Handle and 360° Head
CCD20080C Jelly Water Blade Clear
CCD20080R Jelly Water Blade Red

Electric Fuel Pump

CARP4070
Dependable electric fuel pump produces
The Original 4-6 PSI of operating pressure, is capable
of 72 gallons per hour of free flow and
“Street Super Pumps” requires no pressure regulator. Compact
The tried-and-true mechanical pump has 1/4"NPSF inlet and outlet ports
pump that hot rodders have located “up top” for easy access. Motor
relied upon for years. With 6 PSI is liquid-cooled for extended armature life. Ideal for use
and 120 gallons per hour free with Carter AFB or Edelbrock carburetors.
flow, the Street Super Pump can
be “clocked” – the bowl, with 1/4"NPT inlet and outlet, can
be rotated for best possible clearance in tight quarters. Competition Series
Aluminum casting dissipates heat and is fitted with heat- Electric Fuel Pump
treated levers and anti-float springs.
CARP4594
Part No. Make Engine High-pressure, high-flow fuel pump is
CARM4891 Chevrolet Small Block
CARM4889 Chevrolet Big Block
a reliable solution for most carbureted
CARM6270 Mopar Small Block muscle cars. Pump delivers 6-8 PSI of
CARM4862 Mopar Big Block pressure and flows up to 72 gallons per
CARM60454 Ford Small Block hour. Requires no pressure regulator. 1/4"NPSF inlet and
CARM6905 Ford “FE” (390,428) outlet ports located “up top”. The liquid-cooled motor
CARM6907 Pontiac All V8’s extends armature life with no leak prone seal located
between the motor and pump body.

Small Block Chevy Competition Series

Fuel Pump “Silver Pump”
CARM6624 CARP4600HP
The perfect choice for a Smaller and lighter than most pumps, the
crate motor or any other “Silver Pump” can free flow 100 gallons
basically stock small block per hour at 6-8 PSI with no need for a
Chevy engine, this is a stock regulator. Includes a hose barb inlet
replacement fuel pump that and 3/8"-18NPSF outlet fitting placed
has one 3/8" hose nipple inlet up top for easy plumbing and there is no leak prone seal
and one 5/8"-18 IF outlet. between motor and pump housing. Silver and black
dichromate coating resists corrosion.

122 2023 - 2024 HOT ROD AND EARLY MUSCLE

Multi US 7002 7-Amp Multi US 4.3
Battery Charger CTE40-206
CTE56-353 The MUS 4.3 offers
Recognized as the smallest features such as battery
12-volt battery charger in the world, the CTEK Multi US diagnosis that shows if a battery can receive and retain
7002 is recommended by Optima for their Yellow Top a charge, a special reconditioning function that restores
battery. Unit uses a thorough 7-step maintenance and stratified and deeply discharged batteries, unique
charging process. Special "recon" mode reconditions maintenance charging, a mode for optimized charging
a drained battery after deep discharging, allowing the during cold winter days, and the charging of demanding
battery to recover better and last longer. Compatible with AGM batteries. The unique display allows the user to
most lead-acid batteries including flooded, maintenance- follow the entire charging process.
free, gel, and AGM. Covered by a 5-year warranty. Sold
complete with lead and color-coded clamps.

Comfort Indicator
The Comfort Indicator simplifies
battery charging by indicating when
battery status decreases or when the
battery needs to be charged. Easy-
to-use unit helps prolong battery life
and prevent harmful stratification.
Comfort Indicators are offered in
three versions; eyelet, clamp-on, and
panel styles. Panel mount version is CTE56-382
ideal for race cars, trailers, RV's, etc.
Part No. Description
CTE56-380 Comfort Indicator Panel, Permanent Mount
CTE56-382 Comfort Indicator Eyelet, Small Batteries, etc.
CTE56-384 Comfort Indicator Clamp, Small Batteries

Centerforce offers a multi-level line of clutches to meet the requirements of a wide

range of vehicles and their intended uses. To obtain the proper system, it is extremely
important to completely qualify and verify the vehicle, not only by its make and model
year, but also by defining its intended use. Please call for specific applications.

Centerforce I DFX Series Clutches

The original – offers up to 30% Aimed at “high-end” clutch users
more holding capacity than a looking for more holding power
stock clutch while maintaining a and higher integrity, the DFX
stock pedal feel. The Centerforce is engineered for and proven
I is recommended as the finest in competition. Choose DFX
quality upgrade from the original packages engineered expressly
equipment clutch. for street/strip or full competition.

Dual Friction Flywheels

Generates up to a 90% increase Centerforce uses high-strength
in holding capacity over stock steel and aluminum billet to
systems. Engineered for use manufacture SFI approved
with engines producing high flywheels. Steel 700 series and
HP and torque and any radically the steel friction surfaces on
altered high-performance street aluminum 800 and 900 series
vehicles. flywheels have been heat treated
for long life. All flywheels have been CAD/CAM designed
and CNC-machined to strict tolerances.
Centerforce II Please call for more information.
Provides up to 60% greater
holding capacity than a standard
factory clutch. It is recommended
for use with mildly modified street and strip vehicles.

2023 - 2024 HOT ROD AND EARLY MUSCLE 123

 Fuel System Cleaners
SynClean Synthetic Blend
and Stabilizer
Motor Oil Champion offers a variety of fuel
SynClean extends engine life by reducing additives to keep the fuel system clean,
wear and resisting thermal breakdown. and free of corrosion and contamination.
Synthetic blend oil meets most new
1 Case of
passenger car engine warranty requirements. Description 1 Bottle (12) Bottles
1-Quart 1 Case of Fuel Stabilizer, 8-oz. CHO4205M CHO4205M
Description Bottle (12) 1-Qt. Bottles Ethanol Treatment, 8-oz. CHO4207M —
5W-20 CHO4230H CHO4230H Fuel Injector Cleaner, 12-oz. CHO4275K CHO4275K
Octane Treatment, 12-oz. CHO4276K CHO4276K
Power Shield 30W Break-In Oil
Power Shield delivers a barrier of protection Brake Fluid
to engine components during the break-in of Developed for extreme racing conditions
engines using flat tappet camshafts. Oil has where a high dry boiling point is required,
a viscosity of 30W, and incorporates anti- 600 series Racing DOT 4 brake fluid has
wear additives and ZDDP to provide superior been proven to perform by domestic and
protection during hard run-in conditions. international top-tier racing teams.
1-Qt. 1 Case of Heavy-duty DOT 3, DOT 4, and DOT 5 are
Bottle (12) 1-Qt. Bottles also available.
CHO4270H CHO4270H
1 Case of 1 Case of
12-oz. 1-Quart (12) 12-oz. (12) 1-Qt.
Description Bottle Bottle Bottles Bottles
Heavy Duty DOT 3
CHO4057K CHO4057H CHO4057K CHO4057H
Brake Fluid
Heavy Duty DOT 4
Universal Automatic Brake Fluid
CHO4054K — CHO4054K —

Transmission Fluid DOT 5 Brake Fluid CHO4055K — CHO4055K —

Racing 600 DOT 4
Multi-functional power transmission fluid CHO4059K — CHO4059K —
Brake Fluid
offers anti-shutter, anti-friction, and
high-and low-temperature protection.
Power Steering Fluid
1-Qt. 1 Case of
Bottle (12) 1 Qt. Bottles Premium quality fluid is designed for
CHO4355H CHO4355H applications where the manufacturer
specifies power steering fluid. Fluid meets
the requirements of major domestic and
foreign automobile manufacturers.
12-oz. 1-Qt. 1 Case of
Bottle Bottle (12) 1-Qt. Bottles
Aerosol Cleaners CHO4182K CHO4182H CHO4182H

1 Aerosol 1 Case of (12)

Description Can Aerosol Cans
Carburetor Cleaner, 13-oz. CHO4121KC CHO4121KC
Engine Degreaser, 16-oz. CHO4123I —
Brake Cleaner,
CHO4525I CHO4525I
Non-Chlorinated, 15-oz.
Brake Cleaner, 19-oz. — CHO4126P

75W-90 Racing
Full-Synthetic Gear Lubricant
Synthetic 75W-90 gear lubricant is engineered
to withstand extreme racing conditions
common to gearboxes and rear differentials.
Lubricant includes Champion’s SLI (Shock Load
Inhibitor) chemistry, which has been proven
to absorb extreme loads while reducing heat,
wear, and friction.
1-Qt. 1 Case of
Bottle (12) 1-Qt. Bottles
CHO4312H CHO4312H

124 2023 - 2024 HOT ROD AND EARLY MUSCLE

Direct-Fit Radiator Module Kits
C&R modules are made in the USA using the latest aluminum core
designs and manufacturing techniques for optimum cooling. Features
include dual 11" SPAL fans and a unique soft upper mounting system.
All radiators include a 10-plate engine oil cooler and an optional,
internal power steering oil cooler used in C&R NASCAR radiators.
Coolers mounted in the radiator add a clean look and reduce oil temps
better than an air-to-oil cooler.
Part No. Description
LS Engine Conversion Kits
1967-69 Camaro/Firebird/Nova LS Engine,
CRR15-11014
10-Plate Eng. Oil and Int. PS Cooler

Coan Transmissions and Converters

Please call for specific applications.

Sky Drive GPS FuelLink Fuel Interface

CLASN81 CLASN34
Program your The FuelLink fuel interface
vehicles to read is a problem solver that acts
in miles per hour, as an interface between fuel
kilometers per hour, senders and gauges to correct
or knots - all with Ohm mis-match and erratic movement
push of a button. due to fuel slosh. Available in eight preset Ohm ranges
An omnidirectional (empty to full): 240-33, 0-90, 0-30, 26-158, 75-10, 90-0,
antenna makes 10-180, 40-250.
mounting easy. Designed to work with electronic
speedometers from Classic Instruments or any other
manufacturers, this product also features two additional
Speed Signal Interface
wire leads. One provides an extra speed signal for cruise CLASN74Z
control, and the other can be used to activate a relay or The perfect complement to a
light, allowing for functions such as automatically locking Classic Instruments speedo or
doors or activating a warning light at a preset speed. tach. The speed signal interface
is compatible to many standard
aftermarket gauges as well.

2023 - 2024 HOT ROD AND EARLY MUSCLE 125

Autocross Series Gauge Kits Velocity Series Gauge Kits
Featuring matte black Available in matte black (unless
low-step bezels and flat otherwise indicated) low-step bezels
lenses, the Autocross and flat lenses, the Velocity collection
line of gauges provides of gauges include adjustable LED
a high-tech look, with lighting and integrated warning lights
adjustable LED lighting that illuminate the entire gauge.
and integrated warning A rugged air core motor combines
lights that illuminate the with microprocessor technology for precision and
entire gauge. A rugged durability, with orange pointers for easy reading. Sets
air core motor combines include required senders. Offered with standard or wider
with microprocessor technology for precision and performance-style bezels.
durability. Available with white pointers and markings and Part No. Size Description
either gray or yellow sweep lines. Sets include required White Markings on Black Face
senders. 6-Gauge Short-Sweep Set w/ Fuel Level, Oil
CLAVS251BBLF 2-5/8" Pressure, Temp, Volt, 4-5/8" Speedometer,
Part No. Size Color Description
and 4-5/8" Tach
5-Gauge Full-Sweep Set w/ Fuel Level,
6-Gauge Full-Sweep Set w/ Fuel Level, Oil
CLAAX100GBLF 2-1/8" Gray Oil Pressure, Temp, Volt, and 3-3/8"
CLAVS151BBLF 2-1/8" Pressure, Temp, Volt, 4-5/8" Speedometer,
Speedometer
and 4-5/8" Tach
6-Gauge Full-Sweep Set w/ Fuel
Black Markings on White Face
CLAAX101GBLF 2-1/8" Gray Level, Oil Pressure, Temp, Volt, 3-3/8"
Speedometer, and 3-3/8" Tach 6-Gauge Short-Sweep Set w/ Fuel Level, Oil
CLAVS251WBLF 2-5/8" Pressure, Temp, Volt, 4-5/8" Speedometer,
CLAAX109GBLF 2-1/8" Gray Full-Sweep Fuel Gauge
and 4-5/8" Tach
CLAAX141GBLF 2-1/8" Gray Full-Sweep Boost/Vac Gauge, 30 psi
CLAVS146WBLF 2-1/8" Full-Sweep Fuel Pressure Gauge, 0-100 PSI
6-Gauge Full-Sweep Set w/ Fuel
Full-Sweep Oil Pressure Gauge, 0-100 PSI,
CLAAX151GBLF 2-1/8" Gray Level, Oil Pressure, Temp, Volt, 4-5/8" CLAVS381WAPF 2-5/8"
Aluminum Performance Bezel
Speedometer, and 4-5/8" Tach
CLAVS381WBLF 2-5/8" Full-Sweep Oil Pressure Gauge, 0-100 PSI
6-Gauge Full-Sweep Set w/ Fuel
CLAAX151YBLF 2-1/8" Yellow Level, Oil Pressure, Temp, Volt, 4-5/8" Full-Sweep Oil Pressure Gauge, 0-100 PSI,
CLAVS381WBPF 2-5/8"
Speedometer, and 4-5/8" Tach Performance Bezel
6-Gauge Short-Sweep Set w/ Fuel Full-Sweep Tachometer, 0-10,000 RPM,
CLAVS383WAPF 2-5/8"
CLAAX251GBLF 2-5/8" Gray Level, Oil Pressure, Temp, Volt, 4-5/8" Aluminum Performance Bezel
Speedometer, and 4-5/8" Tach CLAVS383WBLF 2-5/8" Full-Sweep Tachometer, 0-10,000 RPM
6-Gauge Full-Sweep Set w/ Fuel Full-Sweep Tachometer, 0-10,000 RPM,
CLAVS383WBPF 2-5/8"
CLAAX351GBLF 2-5/8" Gray Level, Oil Pressure, Temp, Volt, 4-5/8" Black Performance Bezel
Speedometer, and 4-5/8" Tach Full-Sweep Water Temp Gauge, 100°-280°F,
CLAVS326WAPF-02 2-5/8" w/ 1/8" NPT Sender, Aluminum Performance
Bezel
G/Stock Series Gauge Kits Full-Sweep Water Temp Gauge, 100°-280°F,
G/Stock gauges feature black faces, CLAVS326WAPF-04 2-5/8" w/ 1/4" NPT Sender, Aluminum Performance
stainless steel (unless otherwise indicated) Bezel
Full-Sweep Water Temp Gauge, 100°-280°F,
low-step bezels, and flat lenses. Designed
CLAVS326WAPF-06 2-5/8" w/ 3/8" NPT Sender, Aluminum Performance
to provide a factory look to most muscle Bezel
cars, they include adjustable LED lighting Full-Sweep Water Temp Gauge, 100°-280°F,
and integrated warning lights that illuminate CLAVS326WAPF-08 2-5/8" w/ 1/2" NPT Sender, Aluminum Performance
the entire gauge. A rugged air core motor Bezel
combines with microprocessor technology for precision Full-Sweep Water Temp Gauge, 100°-280°F,
and durability. Red pointers and white markings ensure CLAVS326WAPF-12 2-5/8" w/ M12x1.5 Sender, Aluminum Performance
Bezel
easy readabilty. Sets include required senders. Full-Sweep Water Temp Gauge, 100°-280°F,
CLAVS326WBLF-04 2-5/8"
Part No. Size Description w/ 1/4" NPT Sender
6-Gauge Full-Sweep Set w/ Fuel Level, Oil Full-Sweep Water Temp Gauge, 100°-280°F,
CLAGS151SLF 2-1/8" Pressure, Temp, Volt, 4-5/8" Speedometer, CLAVS326WBLF-06 2-5/8"
w/ 3/8" NPT Sender
and 4-5/8" Tach Full-Sweep Water Temp Gauge, 100°-280°F,
CLAGS183SLF 2-1/8" 8,000 RPM Full-Sweep Tachometer CLAVS326WBLF-08 2-5/8"
w/ 1/2" NPT Sender
CLAGS281BPF 2-5/8" Short-Sweep Oil Pressure Gauge, Black Bezel Full-Sweep Water Temp Gauge, 100°-280°F,
CLAVS326WBLF-12 2-5/8"
CLAGS181SLF 2-1/8" Full-Sweep Oil Pressure Gauge w/ M12x1.5 Sender
CLAGS281SLF 2-5/8" Short-Sweep Oil Pressure Gauge Full-Sweep Water Temp Gauge, 100°-280°F,
CLAVS326WBPF-02 2-1/8"
Short-Sweep Oil Pressure Gauge, Aluminum w/ 1/8" NPT Sender, Black Performance Bezel
CLAGS281APF 2-5/8"
Bezel Full-Sweep Water Temp Gauge, 100°-280°F,
CLAVS326WBPF-04 2-1/8"
CLAGS383SLF 2-5/8" 8,000 RPM Full-Sweep Tachometer w/ 1/4" NPT Sender, Black Performance Bezel
Short-Sweep Water Temp Gauge, 100°-280°F, Full-Sweep Water Temp Gauge, 100°-280°F,
CLAGS226SLF-02 2-5/8" CLAVS326WBPF-06 2-1/8"
w/ 1/8" NPT Sender w/ 3/8" NPT Sender, Black Performance Bezel
Short-Sweep Water Temp Gauge,100°-280°F, Full-Sweep Water Temp Gauge, 100°-280°F,
CLAGS226SLF-04 2-5/8" CLAVS326WBPF-08 2-1/8"
w/ 1/4" NPT Sender w/ 1/2" NPT Sender, Black Performance Bezel
Short-Sweep Water Temp Gauge,100°-280°F, Full-Sweep Water Temp Gauge, 100°-280°F,
CLAGS226SLF-06 2-5/8" CLAVS326WBPF-12 2-5/8"
w/ 3/8" NPT Sender w/ M12x1.5 Sender, Black Performance Bezel
Short-Sweep Water Temp Gauge, 100°-280°F, Full-Sweep Transmission Temp Gauge,
CLAGS226SLF-08 2-5/8" CLAVS127WBLF 2-1/8"
w/ 1/2" NPT Sender 140°-280°F
Short-Sweep Water Temp Gauge, 100°-280°F,
CLAGS226SLF-12 2-5/8"
w/ M12x1.5 Sender
CLAGS130SLF 2-1/8" Full-Sweep Voltage Gauge

126 2023 - 2024 HOT ROD AND EARLY MUSCLE

Hot Rod Series Gauge Kits
Featuring stainless steel (unless otherwise indicated) low-step bezels and flat lenses, the Hot Rod
collection of gauges include adjustable LED lighting and integrated warning lights that illuminate the
entire gauge. A rugged air core motor combines with microprocessor technology for precision and
durability, while white pointers and markings allow for easy reading. Sets include required senders.

Part No. Size Description Part No. Size Description

5-Gauge Full-Sweep Set w/ Fuel Level, Oil Full-Sweep Water Temp Gauge, 100°-280°F,
CLAHR100SLF 2-1/8" CLAHR126SLF-02 2-1/8"
Pressure, Temp, Volt, 3-3/8" Speedometer w/ 1/8" NPT Sender
6-Gauge Full-Sweep Set w/ Fuel Level, Oil Full-Sweep Water Temp Gauge, 100°-280°F,
CLAHR126SLF-04 2-1/8"
CLAHR101SLF 2-1/8" Pressure, Temp, Volt, 3-3/8" Speedometer, w/ 1/4" NPT Sender
and 3-3/8" Tach Full-Sweep Water Temp Gauge, 100°-280°F,
CLAHR126SLF-06 2-1/8"
6-Gauge Full-Sweep Set w/ Fuel Level, Oil w/ 3/8" NPT Sender
CLAHR301SLF 2-5/8" Pressure, Temp, Volt, 3-3/8" Speedometer, Full-Sweep Water Temp Gauge, 100°-280°F,
and 3-3/8" Tach CLAHR126SLF-08 2-1/8"
w/ 1/2" NPT Sender
6-Gauge Short-Sweep Set w/ Fuel Level, Oil Full-Sweep Water Temp Gauge, 100°-280°F,
CLAHR251SLF 2-5/8" Pressure, Temp, Volt, 4-5/8" Speedometer, CLAHR126SLF-12 2-1/8"
w/ M12x1.5 Sender
and 4-5/8" Tach Short-Sweep Water Temp Gauge, 100°-280°F,
6-Gauge Full-Sweep Set w/ Fuel Level, Oil CLAHR226SLF-02 2-5/8"
w/ 1/8" NPT Sender
CLAHR301APF 2-5/8" Pressure, Temp, Volt, 3-3/8" Speedometer, Short-Sweep Water Temp Gauge,100°-280°F,
and 3-3/8" Tach, Aluminum Bezel CLAHR226SLF-04 2-5/8"
w/ 1/4" NPT Sender
6-Gauge Full-Sweep Set w/ Fuel Level, Oil Short-Sweep Water Temp Gauge,100°-280°F,
CLAHR301BPF 2-5/8" Pressure, Temp, Volt, 3-3/8" Speedometer, CLAHR226SLF-06 2-5/8"
w/ 3/8" NPT Sender
and 3-3/8" Tach, Black Bezel Short-Sweep Water Temp Gauge, 100°-280°F,
CLAHR194SLF 2-1/8" Full-Sweep Air/Fuel Ratio Gauge CLAHR226SLF-08 2-5/8"
w/ 1/2" NPT Sender
CLAHR142SLF 2-1/8" Full-Sweep Boost Gauge, 30 PSI Short-Sweep Water Temp Gauge, 100°-280°F,
CLAHR143SLF 2-1/8" Full-Sweep Boost Gauge, 60 PSI CLAHR226SLF-12 2-5/8"
w/ M12x1.5 Sender
CLAHR141SLF 2-1/8" Full-Sweep Boost/Vacuum Gauge, 30 PSI Full-Sweep Water Temp Gauge, 100°-280°F,
CLAHR326SLF-02 2-5/8"
Full-Sweep Cylinder Head Temp Gauge, w/ 1/8" NPT Sender
CLAHR197SLF 2-1/8"
100°-600°F, w/ 14mm Thermocouple Full-Sweep Water Temp Gauge, 100°-280°F,
CLAHR326SLF-04 2-5/8"
CLAHR212SLF 2-5/8" Short-Sweep Fuel Level Gauge w/ 1/4" NPT Sender
CLAHR109SLF 2-1/8" Full-Sweep Fuel Level Gauge Full-Sweep Water Temp Gauge, 100°-280°F,
CLAHR326SLF-06 2-5/8"
CLAHR146SLF 2-1/8" Full-Sweep Fuel-Pressure Gauge, 0-100 PSI w/ 3/8" NPT Sender
CLAHR145SLF 2-1/8" Full-Sweep Fuel-Pressure Gauge, 0-15 PSI Full-Sweep Water Temp Gauge, 100°-280°F,
CLAHR326SLF-08 2-5/8"
CLAHR181SLF 2-1/8" Full-Sweep Oil Pressure Gauge, 0-100 PSI w/ 1/2" NPT Sender
CLAHR281SLF 2-5/8" Short-Sweep Oil Pressure Gauge, 0-100 PSI Full-Sweep Water Temp Gauge, 100°-280°F,
CLAHR326SLF-12 2-5/8"
Short-Sweep Oil Pressure Gauge, 0-100 PSI, w/ M12x1.5 Sender
CLAHR281APF 2-5/8" Full-Sweep Transmission Temp Gauge,
Aluminum Bezel CLAHR127SLF 2-1/8"
Short-Sweep Oil Pressure Gauge, 0-100 PSI, 140°-280°F
CLAHR281BPF 2-5/8" CLAHR130SLF 2-1/8" Full-Sweep Voltage Gauge, 8-18V
Black Bezel
Full-Sweep Oil Temp Gauge, 140°-320°F, CLAHR230SLF 2-5/8" Short-Sweep Voltage Gauge, 8-18V
CLAHR128SLF 2-1/8" Short-Sweep Voltage Gauge, 8-18V,
w/ 1/8" NPT Sender CLAHR230APF 2-5/8"
Full-Sweep Outside Air Temp Gauge, 0°-120°F, Aluminum Bezel
CLAHR199SLF 2-1/8" Short-Sweep Voltage Gauge, 8-18V,
w/ 1/8" NPT Sender CLAHR230BPF 2-5/8"
Full-Sweep Pyrometer, 0°-1600°F, with Type K Black Bezel
CLAHR198SLF 2-1/8"
thermocouple
CLAHR183SLF 2-1/8" Full-Sweep Tachometer, 0-8000 RPM
CLAHR383SLF 2-5/8" Full-Sweep Tachometer, 0-8000 RPM
Full-Sweep Tachometer, 0-8000 RPM,
CLAHR383APF 2-5/8"
Aluminum Bezel

White Hot Series Gauge Kits

Available with polished stainless steel low-step bezels and flat lenses, the White Hot collection of gauges include
adjustable LED lighting and integrated warning lights that illuminate the entire gauge. A rugged air core motor
combines with microprocessor technology for precision and durability. White faces with black type and black
pointers are easy to read and provide a clean, elegant look. Required senders included.
Part No. Size Description
White Markings on Black Face
CLAWH226SLF-02 2-5/8" Short-Sweep Water Temp Gauge, 100°-280°F, w/ 1/8" NPT Sender
CLAWH226SLF-04 2-5/8" Short-Sweep Water Temp Gauge, 100°-280°F, w/ 1/4" NPT Sender
CLAWH226SLF-06 2-5/8" Short-Sweep Water Temp Gauge, 100°-280°F, w/ 3/8" NPT Sender
CLAWH226SLF-08 2-5/8" Short-Sweep Water Temp Gauge, 100°-280°F, w/ 1/2" NPT Sender
CLAWH226SLF-12 2-5/8" Short-Sweep Water Temp Gauge, 100°-280°F, w/ M12x1.5 Sender
CLAWH127SLF 2-1/8" Full-Sweep Transmission Temp Gauge, 140°-280°F

2023 - 2024 HOT ROD AND EARLY MUSCLE 127

 Muscle Car Brake
and Clutch Assemblies
AC Vents Direct bolt-in brake and clutch
assemblies are machined from
CMWAC-902 forged aluminum for great
These Paul Atkins signature series oval AC Vents are strength and modern aesthetic
the custom choice for hot rod interior aesthetics and looks. The triangular hole
functionality. Offering refined beauty with a chrome- design complements most
plated trim ring and adjustable/directional air flow baffle Camaro, Nova, Chevelle and
that can be painted to match or accent interior highlights. Firebird muscle car and pro
Works with standard 2-1/2" AC duct hoses. Dimensions: 4" touring interiors. Kits include
x 1.6". Sold individually. all installation hardware.
Part No. Description
Interior Aluminum Trim CMWMCP-A2-A 1967 A-Body Pedal Assembly, AT
Add defined detail to door panels, CMWMCP-A2-M 1967 A-Body Pedal Assembly, Manual
dash, and center consoles with MCP Throttle Assembly: Mechanical 1964-67
CMWMCP-P1
Chevelle / 1967-69 Camaro / 1968-74 Nova
a 1/4" diameter aluminum trim.
CMWMCP-P4 MCP Drive-by-Wire Assembly
Available in two finishes, smooth
or grooved. Available 4- or 6-foot
lengths. Sold individually.
Part No. Description
CMWAES-4 Smooth Aluminum Trim, 4' Length
CMWAES-6 Smooth Aluminum Trim, 6' Length
LS Coil Covers
1967-72 GM Truck Bezels These innovative LS coil covers
are machined from 6063
Direct fit instrument bezels
aluminum which mounts directly
for 1967-72 series GM trucks,
to GM LS coil brackets. Sold as a
Blazers, and Suburbans. Can
pair. Black.
be used with stock gauges or a
direct-fit aftermarket gauge cluster of your choice. Part No. Description
CMWLSC-01-B LS Coil Covers—Black (With Oil Fill Cutout)
Part No. Description CMWLSC-02-B LS Coil Covers—Black (No Oil Fill Cutout)
CMW6772-B Brushed CMWLSC-02-M LS Coil Covers—Milled Finish (No Oil Fill Cutout)
CMW6772-C Carbon

Exterior Aluminum Trim

Billet Shifter Handles Made from 6063 billet
The new billet shifter handles are that can be easily
machined from billet aluminum, anodized shaped to any contour.
black or gray then re-machined to create Sold individually or as a
highlights. These shifter handles will look complete kit. Kit includes
great in any interior, from street rods to (2) 8', (2) 6', (2) 4' pieces
muscle cars. Direct bolt-on for Hurst and Tremec shifters and 3M high-strength
using a 2-bolt flange. Includes 3/8"-16 threads size for adhesive backing. Easy installation, no drilling required.
knob attachment. Sold individually.
Part No. Description
Part No. Description CMWTRIM-01-4 Ribbed Exterior Aluminum Trim - 4'
CMWSH-205-10 10" Black Anodized Truss Shifter Handle CMWTRIM-01-6 Ribbed Exterior Aluminum Trim - 6'
CMWSH-205-8 8" Black Anodized Truss Shifter Handle

LS Engine Oil Caps

Door Handles and Window Cranks Machined from billet aluminum, and
Paul Atkins signature series drilled available in a variety of designs and
I-beam door handles and window finishes, these engine oil caps are a
cranks with inserts can be painted stylish finishing touch to any LS series
or upholstered. Durable chrome engine.
plating. Fits GM and Ford, 1949-up.
Sold as a pair. Part No. Description
CMWLSO-01-B LS Engine Oil Cap, Grooved, Black Anodized
Part No. Description CMWLSO-02-B LS Engine Oil Cap, Dished, Black Anodized
Black Anodized with Machined Highlights and Mesh CMWLSO-02-P LS Engine Oil Cap, Dished, Polished Finish
CMWPT-302
Inserts Door Handle-1949 and up GM and Ford CMWLSO-03 LS Engine Oil Cap, Modern, Brushed Finish
Black Anodized with Machined Highlights and Mesh
CMWPT-303
Inserts Window Crank -1949 and up GM and Ford
Black Powder-Coated with Machined Highlights (Truss
CMWPT-402
Style) Door Handle -1949 and up GM and Ford
Black Powder-Coated with Machined Highlights (Truss
CMWPT-403
Style) Window Crank -1949 and up GM and Ford
Black Powder-Coated with Machined Highlights (Truss
CMWPT-404
Style) Vent Window Crank -1949 and up GM and Ford

128 2023 - 2024 HOT ROD AND EARLY MUSCLE

Nostalgic Radials
Coker leads the field in the development of nostalgic radial tires with
wide whitewalls. Enjoy the benefits of modern radial tire technology
and still maintain a car’s original styling and appearance.
Part No. Size Description
COK55515 560-15 Pro-Trac Front Runner Bias Black Sidewall
COK57700 670-15 Coker 2-3/4" Whitewall Bias
COK62243 650R16 Coker 3-1/4" Whitewall Radial
COK62490 FR70-15 Firestone RWL
COK62500 FR70-15 Firestone Red Line
COK538900 P215/75R14 Classic 2-1/2" Whitewall
COK579702 P205/75R15 BF Goodrich Red Line
COK579760 P215/70R15 BF Goodrich Silvertown Radial 2-1/2" Whitewall
COK587050 P215/75R15 Classic 2-1/2" Whitewall
COK587031 P225/75R15 Classic 2-3/4" Whitewall
COK629600 P235/75R15 Classic 3-1/8" Whitewall
COK629711 P285/70R15 BFG Black Wall Tire
COK6308000 P275/60R15 BFG T/A RWL Radial
COK700219 P235/75R15 American Classic 1.6" Whitewall Tire
Tire Accessories
COK3000-15 15" Stainless Steel Trim Ring

1979-93 Mustang Torque Link Weld-In Subframe Connectors

COE4010 Connecting front and
Control engine twist on late rear frame sections on
model 5.0L Mustangs with unibody cars is a must
Competition Engineering’s when rear traction bar and
Torque Link. One bracket crossmembers are used.
is attached to the front of the left cylinder head and the Select 2" square, .083" wall
other is attached to the sway bar mount on the frame. connectors have provisions to move rear springs inboard
The Torque Link joins the two brackets to securely hold for tire clearance. One pair per package.
the engine in place. Part No. Description
COE3012* 1967-69 Camaro, Firebird
COE3013* 1970-81 Camaro, Firebird
Slide-A-Link COE3016* 1968-76 Nova, Ventura
The bolt-on COE3046 1982-92 Camaro/Firebird Without Rear Crossmember
Slide-A-Link is a * Must be used with formed rear frame rails.
revolutionary new
traction device
that is far superior
Bolt-On Subframe Connectors
to traditional leaf Bolt-on subframe
spring traction bars. Adjust pinion angle and pre-load for connectors cure the
improved 60 ft. and 1/4 mile ETs. Includes replacement flex problem common
lower axle mount pads, 1/2" U-bolts, replacement to all unibody cars.
aluminum front spring eye bushings, hardware, and Computer designed
instructions. and fixture welded for
proper fit, connectors are NHRA approved. Connectors
Part No. Description do not move the rear springs inboard.
COE2096 1970-81 Camaro/Firebird
COE2100 1967-69 Camaro/Firebird, 1962-79 Chevy II And Nova Part No. Description
COE3112 1967-69 Camaro/Firebird
COE3113 1970-75 Camaro/Firebird
COE3114 1976-81 Camaro/Firebird
COE3116 1968-76 Nova, Tempest, Apollo, Omega
COE3118 1962-67 Chevy II
COE3140 1964-70 Mustang

2023 - 2024 HOT ROD AND EARLY MUSCLE 129

Cold Case Radiators
A division of Max Performance Inc., a leading supplier of auto
restoration parts, Cold-Case Radiators® is an aluminum radiator
specialist for the muscle car market. All radiators are 100% TIG
welded, offer an oversize two-row design, and are covered by a
limited lifetime warranty.
Part Application Dimensions Inlet Outlet Trans/Note
Radiators
GM
CCRCHC11 1967-68 GM F-Body, BBC 27.5"W x 18.5"H x 3"D Driver Passenger Manual
CCRCHC11A 1967-68 GM F-Body, BBC 27.5"W x 18.5"H x 3"D Driver Passenger Automatic
CCRCHC545 1970-81 GM F-Body 31.5"W x 19"H x 3"D Driver Passenger Manual
CCRCHC545A 1970-81 GM F-Body 31.5"W x 19"H x 3"D Driver Passenger Automatic
CCRCHC547A 1967-69 GM F-Body, LS-Series 30"W x 19"H x 3"D Passenger Passenger
CCRCHC549 1967-69 GM F-Body, SBC 28.8"W x 18.5"H x 3"D Driver Passenger Manual
CCRCHC549A 1967-69 GM F-Body, SBC 28.8"W x 18.5"H x 3"D Driver Passenger Automatic
CCRCHE541A 1964-65 GM A-Body 27.75"W x 20.125"H x 3"D Passenger Passenger Automatic
CCRCHE542 1966-67 GM A-Body 27.75"W x 20.5"H x 3"H x 3"D Driver Passenger Manual
CCRCHE542A 1966-67 GM A-Body 27.75"W x 20.5"H x 3"H x 3"D Driver Passenger Automatic
CCRCHI565A 1961-65 GM B-Body 28.75"W x 23"H x 3"D Passenger Passenger
CCRCHI565A-5 1961-65 GM B-Body 28.75"W x 23"H x 3"D Passenger Passenger 500 Steering Box Cutout
CCRCHI566A 1966-68 GM B-Body 28.75"W x 23.5"H x 3"D Driver Passenger
CCRCHI579A 1994-96 GM G-Body 36"W x 18.5"H x 3"D Driver Passenger
CCRCHN540 1962-67 GM X-Body 22.35"W x 20.7"H x 3"D Driver Passenger Manual
CCRCHN540A 1962-67 GM X-Body 22.35"W x 20.7"H x 3"D Driver Passenger Automatic
CCRCHT562A 1955-57 Chevy Full-Size Car, V8 23.5"W x 23.5"H x 3"D Center Passenger
CCRCHT563A 1955-57 Chevy Full-Size Car, V8 23.5"W x 23.5"H x 3"D Center Passenger
CCRCHT569A 1949-54 Chevy Car 25.2"W x 23.2"H x 3"D Center Passenger
CCRCHV712A 1963-68 Chevy Corvette, SBC 24.5"W x 18"H x 3"D Driver Passenger
CCRCHV716A 1973-76 Chevy Corvette, SBC 33.7"W x 19"H x 3"D Driver Passenger
CCRGMA42 1968-72 GM A-Body 34.75"W x 18.75"H x 3"D Driver Passenger Manual
CCRGMA42A 1968-72 GM A-Body 34.75"W x 18.75"H x 3"D Driver Passenger Automatic
CCRGMA43A 1966-71 Oldsmobile 442 33.75"W x 18.25"H x 3"D Driver Passenger Automatic
CCRGMB57A 1984-87 Grand National/Regal Turbo 32"W x 18.5"H x 3"D Driver Passenger Automatic
CCRGMT555A 1963-66 Chevy/GMC Truck 24.5"W x 22.5"H x 3"D Driver Passenger Automatic
CCRGMT556A 1977-87 Chevy/GMC Truck 34.15"W x 18.6"H x 3"D Driver Passenger Automatic
CCRGMT556A21 1977-87 Chevy/GMC Truck/SUV 28.35"W x 21"H x 3"D Driver Passenger Automatic
CCRGMT558A 1967-76 Chevy GMC Truck 34"W x 18.6"H x 3"D Driver Passenger Automatic
CCRGMT567A 1955-59 Chevy Truck 27"W x 25.7"H x 3"D Center Passenger
CCRGMT568A 1947-54 Chevy Truck 22.6"W x 27"H x 3"D Center Passenger
CCRGPF18 1970-81 Pontiac Firebird 33.2"W x 18.8" H x 3"D Driver Passenger Manual
CCRGPF18A 1970-81 Pontiac Firebird 33.2"W x 18.8" H x 3"D Driver Passenger Automatic
CCRGPG20 1965 Pontiac GTO w/o AC 25.75"W x 20.125"H x 3"D Passenger Passenger Automatic
CCRGPG22 1964-65 Pontiac GTO w/ AC 25.75"W x 20.125"H x 3"D Passenger Passenger Manual
CCRGPG34 1966-67 Pontiac GTO w/o AC 25.75"W x 20.125"H x 3"D Driver Passenger Manual
CCRGPG34A 1966-67 Pontiac GTO w/o AC 25.75"W x 20.125"H x 3"D Driver Passenger Automatic
Ford
CCRFOF585A 1966-67 Ford Fairlane BBF 25.5"W x 21.5"H x 3" Passenger Driver Automatic
CCRFOG580A 1960-63 Ford Galaxie, Side Tank 26.5"W x 20.8"H x 3"D Passenger Driver Automatic
CCRFOM560A 1967-70 Ford Mustang 21.1"W x 20.5"H x 3"D Passenger Driver Automatic
CCRFOM561A 1967-70 Ford Mustang 289/302 22.4"W x 20.5"H x 3"D Passenger Driver Automatic
CCRFOM564 1965-66 Ford Mustang 289 19.6"W x 21"H x 3"D Passenger Passenger Manual
CCRFOM564A 1964.5-66 Ford Mustang 289 18.38"W x 20.50"H x 3"D Passenger Passenger Automatic
CCRFOM588 1967-70 Ford Mustang BBF 25"W x 21.25"H x 3" Passenger Driver Manual
CCRFOM588A 1967-70 Ford Mustang BBF 25"W x 21.25"H x 3"D Passenger Driver Automatic
CCRLMM570-1 1987-93 Ford Mustang 30.175"W x 19.7"H x 3"D Passenger Driver
CCRFOT575A 1969-79 Ford Trucks/Bronco 29.7"W x 26.50"H x 3"D Passenger Driver Automatic
CCRFOT576A 1953-56 Ford F100 w/Inline 6 26.2"W x 25.5"H x 3"D Center Driver
Mopar
CCRMOP750-5 1966-74 Mopar w/ Hemi Swap 29"W x 23"H x 3"D Passenger Passenger Manual
CCRMOP750A 1966-74 Mopar A/B/C/E Body w/ AC 29"W x 23"H x 3"D Driver Passenger Automatic
CCRMOP751A 1962-74 Mopar A/B/C/E Body 26.3"W x 23.5"H x 3"D Center Driver Automatic
CCRMOP754A 1970-74 Mopar E-Body/Challenger 28.85"W x 23.25"H x 3"D Passenger Driver Automatic
CCRMOP755-5 1970-72 Mopar w/Hemi Swap 25"W x 22.5"H x 3"D Driver Passenger Manual
CCRMOP755A 1970-72 Mopar A/B Body SBM 25"W x 22.5"H x 3"D Driver Passenger Automatic
CCRMOP756A 1967-69 Mopar A-Body SBM 25.5"W x 22.5"H x 3"D Driver Driver 1.5"Inlet/Outlet
CCRMOP756A-5 1967-69 Mopar A-Body BBM 25.5"W x 22.5"H x 3"D Driver Driver 1.75"Lower Outlet
CCRMOT561A 1970-79 Dodge Truck/Van w/ AC 25.40"W x 23.25"H x 3"D Driver Passenger Automatic

130 2023 - 2024 HOT ROD AND EARLY MUSCLE

 Part Application Dimensions Inlet Outlet Trans/Note
Radiator and Fan Kits
GM
CCRCHC11AK 1967-68 GM F-Body, BBC 27.5"W x 18.5"H x 3"D Driver Passenger Automatic
CCRCHC11K 1967-68 GM F-Body, BBC 27.5"W x 18.5"H x 3"D Driver Passenger Manual
CCRCHC545AK 1970-81 GM F-Body 31.5"W x 19"H x 3"D Driver Passenger Manual
CCRCHC545K 1970-81 GM F-Body 31.5"W x 19"H x 3"D Driver Passenger Automatic
CCRCHC547AK 1967-69 GM F-Body, LS Series 30"W x 19"H x 3"D Passenger Passenger
CCRCHC557AK 1967-69 GM F-Body, SBC 28.8"W x 18.5"H x 3"D Driver Passenger Automatic
CCRCHE541AK 1964-65 GM A-Body 27.75"W x 20.125"H x 3"D Passenger Passenger Automatic
CCRCHE542AK 1966-67 GM A-Body 27.75"W x 20.5"H x 3"H x 3"D Driver Passenger Automatic
CCRCHE542K 1966-67 GM A-Body 27.75"W x 20.5"H x 3"H x 3"D Driver Passenger Manual
CCRCHN548AK 1968-79 X-Body 28.35"W x 19"H x 3"D Driver Passenger Automatic
CCRCHT562AK 1955-57 Chevy Full-Size Car 23.5"W x 23.5"H x 3"D Center Passenger
CCRCHT563AK 1955-57 Chevy Full-Size Car 23.5"W x 23.5"H x 3"D Center Passenger
CCRGMA42AK 1968-72 A-Body 34.75"W x 18.75"H x 3"D Driver Passenger Automatic
CCRGMA42ASK 1968-77 A-Body 34.75"W x 18.75"H x 3"D Driver Passenger Automatic
CCRGMA42K 1968-72 A-Body 34.75"W x 18.75"H x 3"D Driver Passenger Manual
CCRGMA546AK 1968-72 A-Body LS Swap 34.21"W x 18.82"H x 3"D Passenger Passenger
CCRGMA546ASK 1968-72 A-Body LS Swap 34.21"W x 18.82"H x 3"D Passenger Passenger
CCRGMB57AK 1984-87 Grand National/Regal Turbo 32"W x 18.5"H x 3"D Driver Passenger Automatic
CCRGMG544AK 78-88 GM G-Body 31.5"W x 18.5"H x 3"D Driver Passenger Automatic
CCRGMT554AK 1960-62 Chevy C/K Trucks 26.5"W x 25"H x 3"D Center Passenger
CCRGMT555AK 1963-66 Chevy/GMC Truck 24.5"W x 22.5"H x 3"D Driver Passenger Automatic
CCRGMT556A21LSK 1977-87 GM Truck LS Swap 34.33"W x 21"H x 3"D Passenger Passenger Automatic
CCRGMT558AK 1967-76 Chevy/GMC Truck 34"W x 18.6"H x 3"D Driver Passenger Automatic
CCRGMT558ALSK 1967-76 Chevy/GMC Truck LS Swap 34.2"W x 18.80"H x 3"D Driver Passenger
CCRGMT558ASK 1967-76 Chevy/GMC Truck 34"W x 18.6"H x 3"D Driver Passenger Automatic
CCRGMT568AK 1947-54 Chevy Truck 22.6"W x 27"H x 3"D Center Passenger
CCRGPF18AK 1970-81 Firebird 33.2"W x 18.8"H x 3"D Driver Passenger Automatic
CCRGPF18K 1970-81 Firebird 33.2"W x 18.8"H x 3"D Driver Passenger Manual
CCRGPG34ASK 1964-67 Pontiac GTO w/o AC HO/SD 25.25"W x 20.125"H x 3"D Driver Passenger Automatic
CCRGPG38ASK 1964-67 Pontiac GTO w/ AC HO/SD 25.125"W x 21.875"H x 3"D Driver Passenger Automatic
CCRLMP590AK 1982-92 GM F-Body 32"W x 18.5"H x 3"D Driver Passenger
Ford
CCRFOM588AK 1967-70 Mustang BBF 25"W x 21.25"H x 3"D Passenger Driver Automatic
CCRFOT575AK 1966-79 Ford Truck/Bronco 29.7"W x 26.50"H x 3"D Passenger Driver Automatic
Mopar
CCRMOP755AK 1970-72 Mopar A/B-Body SBM 25"W x 22.5"H x 3"D Driver Passenger Automatic

Electric Fan Wiring Kit Heavy-Duty Drain Petcock

CCREF-1 CCRDC-1
Fans kick on at 190°F. Operates 1/4” NPT. Brass. Sold each.
single or dual-fan setups.
Includes wiring, thermostat,
and relay.

Cyclo produces a complete line of cleaners, chemicals, and lubricants

formulated for use by professionals as well as hobbyists.
Part No. Description Part No. Description
CCLC1 Carb Clean, 13-oz. Spray Carb Cleaner CCLC35 Undercoating, 17-oz. Can
CCLC5 Carb Clean, 19-oz. Spray Carb Cleaner CCLC43 Gas Treatment, 8-oz. Bottle
Break-Away, Penetrates/Lubricates, CCLC47 Octane Boost, 12-oz. Bottle
CCLC10
13-oz. Aerosol Can CCLC52 Radiator Stop Leak, 11-oz. Bottle
CCLC30 Engine Clean, 16-oz. Aerosol Can CCLC55 Brake Fluid, 12-oz. Bottle
CCLC331 Glass Clean, 19-oz. Aerosol Can CCLC111C Brake and Parts Clean, Red Can, 15-oz.
CCLC32 Brake and Parts Clean, Green Can, 18-oz. Aerosol Can CCLC400 HD Faster Super Penetrant, 11-oz. Can
CCLC33V Silicone Spray, 10-oz. Aerosol Can
CCLC34 White Grease, 11-oz. Aerosol Can CCLC1

2023 - 2024 HOT ROD AND EARLY MUSCLE 131

Cat Back Exhaust Systems
Some manufacturers use perforated tubes with packing material, or baffles,
to reduce noise. CORSA uses a straight-through design coupled with
RSC—Reflective Sound Cancellation—to reduce low-frequency resonance
and minimize backpressure, so the engine can make more power and torque.
Systems are made of 304 stainless steel. Most systems are offered as two
different sound levels: TOURING and SPORT. A select number of systems are
available at the XTREME sound level.
Same flow. Same power. Same technology. Three different sounds.
Call For Applications

TOURING SPORT XTREME

Refined, Distinctive Sound. Robust. Bolder, Louder, Meaner.
A notch Below SPORT. Aggressive Sound. More Extreme Than Sport.

Use the chart below to help select which fabric is best suited for your protection needs.
Some indoor fabric can be used on a limited basis outdoors at car shows, etc., but does
not offer the level of protection found in outdoor fabrics. Any of the outdoor fabrics can be
used indoors. Three asterisks in the performance row designates fabrics as available in
both Ready-Fit and Custom Fit covers.
Car Cover Comparison Chart
Car Cover Comparison Chart
Recommended for Indoor Use Recommended for Outdoor Use

Gray Tan Covercraft Covercraft 3‑Layer Covercraft 5‑Layer

Form‑Fit™ Reflec'tect™ WeatherShield® HP Ultra'tect® Sunbrella® WeatherShield® HD
Polycotton Flannel 5‑Layer Indoor Moderate Climate All Climate

Exclusive No No Yes Yes Yes No Yes Yes Yes No Yes

Outdoor Use Fair Fair Fair Fair Good Good Best Best Intense Sun Intense Sun Intense Sun

Indoor Use Good Better Better Best Better Better Best Best — — —

All‑Weather Protection — — — — Good Good Best Best Better Better Best

Rain — — — — Better Better Best Best Better Good Best

Snow — — — — Good Better Best Best Better Minimal Best

Resists

Dirt / Dust Fair Fair Better Best Good Better Best Best Better Fair Best

UV Damage — — — — Good Better Better Better Best Best Best

Bird
— — — — Better Better Best Best Best Better Best
Droppings

Breathability Best Best Best Best Good Good Good Good Good Best Good

Heat Insulation Fair Good Good Good Better Better Best Good Good Good Good

"Soft" Touch Good Best Best+ Best Better Good Best Better Better Good Better

Ding Protection Minimal Better Best Best Good Minimal Better Minimal Minimal Better Fair

Ease of Handling in Wind — — — — Fair Fair Better Fair Better Fair Fair

Mildew / Rot Resistant — — — — YES YES YES YES YES YES YES

Storage Space Required Medium Medium Medium Large Medium Small Large Smallest Small Medium Medium

Wash Home1 Home1 Home1 Comm. Comm. Home1 Comm. Home1 Home1 Comm. Home1
Cleaning

Air/Low Medium
Dry Low Low Low Air Air Air Medium Heat Air Low Heat
Heat Heat

Limited Warranty 2 90 Days 90 Days 4 Years 4 Years 3 Years 3 Years 4 Years 4 Years 5 Years 6 Years 6 Years

1
Smaller covers can be washed at home but commercial washers provide the best cleaning & rinse.
2
Warranty is for defects in material and workmanship & against the fabric becoming unserviceable. We will repair or replace after factory inspection.
#D918 1/22

132 2023 - 2024 HOT ROD AND EARLY MUSCLE

ProFlo Maximum Electric Water Pumps Protorque Starters
Pumps have adjustable cam stops and Starters have 1.9 horsepower
accept stock brackets. Pumps add and a 4:1 gear reduction ratio
horsepower by eliminating the drive for exceptional cranking power.
belt and fan, plus they improve They weigh just 10 pounds and are
cooling efficiency. Suitable for adjustable for best header/oil pan clearance (CVR1337 is
street or strip, aluminum not adjustable).
housings have billet aluminum Part No. Description
impellers, stainless steel shafts CVR1337 Chrysler V8 and I-6
and carbon ceramic seals. Stainless fasteners are CVR5048 Ford 351M-400, 429-460
included. CVR5055 SB Ford 289-351W, AT or MT 4-/5-Speed
CVR5311 Olds 307-455/Pontiac 326-455
Part No. Description
CVR7550 Small Block Chevy 265-400, 60 GPM CVR5323 Chevy V8, 153/168T
CVR7554 Big Block Chevy 396-454, 60 GPM CVR5323OS Chevy V8, 168T, Staggered Mount
CVR6551 GM LT-1, 55 GPM CVR5414 GM LS Series Engines
CVR6540 Big Block Chrysler 383-440, 55 GPM
CVR7426 Big Block Chrysler 383-440, Housing Only
12-Volt Electric Vacuum Pumps
Billet Aluminum Throttle Cable Bracket CVRVP555
CVR64150CL Precision-machined,
CNC-machined from anodized aluminum pumps
billet aluminum, bracket are for vehicles using engine
is easily mounted to base of combinations that provide
Holley 4150 carburetors and little or no manifold vacuum.
accept GM snap-in or Morse 33-C throttle cables. An When vacuum drops below 15"
optional throttle return spring assembly is available of vacuum, the pump activates
separately. Clear anodized finish. and increases the brake
vacuum level to 20". Units are
completely self-contained, just hook up
Billet Aluminum the positive/negative power supply.
Timing Covers
Two-piece covers prevent camshaft Cast Aluminum
movement for accurate timing; cam
may be changed without disturbing the Timing Covers
oil pan seal. Includes bolts, gaskets, Two-piece cast covers prevent
seal, cam button, and shims. Choice of camshaft movement for accurate
clear, red, or black anodized finish. timing; cam may be changed
Description Clear Red Black
without disturbing the oil pan
Small Block Chevy seal. Includes bolts, gaskets, seal,
CVRTC2350CL CVRTC2350R — cam button, and shims. Natural
265-400 Timing Cover
Big Block Chevy 396-
CVRTC2454CL — —
aluminum.
454 Timing Cover
Part No. Description
LS Series CVRTC2327CL — CVRTC2327BK CVRTC2328 LS Series
CVRTC2328S LS Series w/ Cam Sensor

Tech Tip
When the power brakes go away, engine idle is rough, or low RPM throttle response is sluggish at best,
your newly rebuilt engine could be the victim of low engine vacuum. Normal vacuum for a stock
engine is between 17" Hg - 22" Hg at idle with the engine at operating temperature. If the engine
has been modified 15" Hg is acceptable. Low vacuum can be caused by many things, including
worn piston rings, leaking intake gaskets, or leaking carburetor to intake manifold gaskets.
These three conditions are usually found in used engines with high mileage and ready for
a rebuild. Using a vacuum gauge will help pinpoint the possible cause for low vacuum.
When checking vacuum readings keep in mind that above 2,000 feet elevation the reading
will be approximately one inch lower per each 1,000 feet rise in elevation. Here are a few
examples of abnormal vacuum readings: With the engine at steady idle and an intermit-
tent drop of 3"-5", sticky valves could be the culprit. At 3000 RPM's and the pointer changes
rapidly as the RPM's are increased, this is an indication of weak valve springs. Steady 8"-14"
at idle points to incorrect valve timing and steady 14"-16" at idle means incorrect ignition
timing. Low vacuum in a recently rebuilt engine can point to the installation of a camshaft with
too much valve overlap/duration. If the low vacuum condition is determined to be a result of the
short duration camshaft, an electric vacuum pump is the cure. These units are simple to install and
will regulate the vacuum level itself.

2023 - 2024 HOT ROD AND EARLY MUSCLE 133

Ford 9" Housing & Axle Packages
Currie 9" housing & axle packages are
designed as direct bolt-in assemblies, matching stock axle width,
pinion offset, suspension mounting locations, and wheel bolt pattern
for each specified vehicle. Currie Centurion 9" notch-back housing
serves as the basis for the package along with Currie Performance
31-spline axles & wheel nuts, and Timken axle bearings. The Currie
Centurion housing features 3" diameter axle tubes and CNC-machined
face flanges. The 31-spline, 1541 alloy axles are drilled to match the OE
wheel pattern and stud size.
Part No Application
CUECE-FDM6466X 1964-66 Mustang, Housing & Axle Assembly
CUECE-FDM6770X 1967-70 Mustang, Housing & Axle Assembly
CUECE-GMA6466X 1964-66 GM A-Body, Housing & Axle Assembly
CUECE-GMA6872X 1968-72 GM A-Body, Housing & Axle Assembly
CUECE-GMG7887X 1978-88 GM GA-Body, Housing & Axle Assembly

For more than a century, Dana has produced the drivetrain components trusted by OEMs for everything from street cars
to heavy-duty off-road trucks. Through their legendary Spicer brand, Dana offers those same top-quality parts to the
aftermarket. Rely on Dana for rugged axles and axle components, driveshafts, and more to prolong vehicle life and reduce
NVH (noise, vibration, and harshness), no matter where the road takes you.

Transmission Slip Yokes

Premium, direct replacement transmission slip yokes are offered for a variety of
applications.
Part No. Trans. Application Spline U-Joint Series Overall Length
DAN2-3-10431X GM TH-400/Jerico 32 1310 5.500"
DAN2-3-10831X GM TH-400/Jerico 32 1330 6.760"
DAN2-3-4871X Ford C-4/AOD/T-5 28 1310 6.000"
DAN2-3-6041X Ford C-6/T-45/3650 31 1330 6.000" DAN2-3-10431X
DAN2-3-6081X GM Powerglide/TH-350/Borg-Warner/Muncie 27 1310 5.469"

Universal Joints and Related Components

Replacement universal joints are premium, OEM-quality. Sold with snap rings
and grease fitting where specified.
Part No. Description
DAN5-1310-1X* 1310 Series, 1.062" Caps, 3.219" Wide, OSR
DAN5-1310X 1310 Series, 1.062" Caps, 3.219" Wide, OSR
DAN5-1330-1X* 1330 Series, 1.062” Caps, 3.625" Wide, OSR
DAN5-1330X 1330 Series, 1.062" Caps, 3.625" Wide, OSR
DAN5-134X* 1310 To 1330 Conversion, 1.062" Caps, 3.219"/3.625” Wide, OSR
DAN5-153X* 1310 Series, 1.062" Caps, 3.219" Wide, OSR
U-Joint Strap Kits
DAN2-70-18X Spicer 1310/1330 Combination, 1.062" Caps, 1/4" Bolts
DAN2-70-28X Spicer 1350, 1.062" Caps, 5/16" Bolts
Note: “OSR” signifies outside snap rings; “ISR” inside snap rings.
*Include grease fitting
DAN5-1310-1X

134 2023 - 2024 HOT ROD AND EARLY MUSCLE

Fire Wrap 3000 Highly Angled Spark Plug
A heavy iron oxide silicone Protect-A-Boot Sleeves
compounded outer sleeve DEI Protect-A-Boots protect spark
covering a glass fiber inner plug boots and wires against the harmful
sleeve, Fire Wrap 3000 is highly effects of direct and continuous heat, up to
flame resistant. Featuring an 1200°F. Pliable construction allows protection for straight
internally sewn Velcro edge to 90° spark plug boots and wires. Available in silver only.
closure, the wrap is easily installed and can withstand Part No. Description
repeated exposure to 3000°F and direct continuous DSN10551 Protect-A-Sleeves, 2-Pack
heat to 500°F. Use Fire Wrap 3000 to protect wire looms, DSN10552 Protect-A-Sleeves, 8-Pack
hoses, cable bundles, fuel and brake lines, and hundreds
of other items prone to heat and abrasion damage. Titanium Protect-A-Sleeve with LR Technology
Available in 5/8", 1", and 1-1/2" inside diameters.
Part No. Description
DSN10475
DSN10477 Fire Wrap 3000, 5/8" x 2' Developed specifically for any
DSN10478 Fire Wrap 3000, 1" x 2' application where extreme high heat
DSN10479 Fire Wrap 3000, 1-1/2" x 2' is present. These Titanium™ sleeves will
protect wires, lines, and cables when
Hi-Temp Shrink Tubes exposed up to 1800°F direct heat and
Over expanded, flame retardant 2500°F radiant heat.
polyolefin tubing easily fits over the
end of connectors and shrinks down Titanium Protect-A-Boots
to 33% of its original diameter. Fits Advanced proprietary LR (lava
snugly to provide a waterproof, rock) fiber technology, stranded
dust-proof seal while and woven into a strong durable
retaining original length. fabric. The ultimate spark plug
Use a 120°-180°F heat gun boot and wire heat protection up to 1,800°F direct heat
to shrink. Ideal for electrical and 2,500°F radiant heat. The 6" length with reinforcing
wire, hose, and cable bundling. ring allows for easy plug removal while the 8" ringless
Part No. Description style is great for tight bends. Universal for most straight
DSN10832 9mm Shrink Tube, 4' or angled boots. Great for LS motors.
DSN10833 12mm Shrink Tube, 4'
Part No. Description
DSN10834 18mm Shrink Tube, 4' DSN10544 8" Titanium Protect-A-Boots, Ringless, 8 Pack
DSN10542 6" Titanium Protect-A-Boots, 8 Pack
DSN10540 8" Titanium Protect-A-Boots, Ringless, 6 Pack
Protect-A-Boot
Heat from headers and Titanium Protect-A-Boot and Wire Kit
exhaust manifolds can really Everything needed to protect
damage spark plug boots in spark plug boots and wires
short order. Protect-A-Boots from under-hood heat up to
install in seconds on straight 1,800°F direct heat and 2,500°F
or angled boots and can radiant heat. Boots and
protect against 500°F direct, sleeving are constructed from
continuous heat and 1,500°F radiant heat. high temperature-resistant
Description 2-Cylinder Kit 4-Cylinder Kit 8-Cylinder Kit glass fiber material.
Silver DSN10501 DSN10507 DSN10502 Part No. Description
Black DSN10511 DSN10523 DSN10512 Titanium 4-Cylinder Kit, Contains 13' of Line Sleeving, (12)
Red — — DSN10522 DSN10588
Hi-Temp Shrink Tubes, and (4" 6" Protect-A-Boots
Blue — — DSN10532 Titanium 8-Cylinder Kit, Contains 25' of Line Sleeving,
DSN10705
(25) Hi-Temp Shrink Tube,s and (8) 6" Protect-A-Boots

Protect-A-Sleeve
Made from the same proprietary
materials as DEI's Protect-A-Boots,
these sleeves will protect wiring
hosing from temperatures up to
1,800°F direct heat and 2,500°F
radiant heat.
Part No. Description
DSN10589 Black Titanium, 1" x 36" Roll
DSN10591 Black Titanium, 1/2" x 72" Roll

2023 - 2024 HOT ROD AND EARLY MUSCLE 135

Protect-A-Wire Sleeve Versa-Shield
Temperature-resistant glass fiber material DSN10402
sleeve protects spark plug wires and other Aluminized heat-reflective material
wires, lines, and hoses from engine heat. serves as an insulation barrier to
Sleeve has an 8 mm I.D. to cover most prevent starter and solenoid failure.
standard plug wires, and can be cut to Effective to 2,000°F. 7" wide x 24"
length as needed. Kits include DEI boot long.
heat-shrink tubes.
Part No. Description
DSN10611B50 Black Protect-A-Wire, 50' Roll
Ultra Shield MA Starter Shield
DSN10621
2-Cylinder Kit, Red Protect-A-Wire, include DSN10235
7' of Sleeve and 6 Heat-Shrink Tubes
Two-layer construction,
impregnated by molten aluminum
HT Silicone Coating (MA) for highly reflective properties
Choose black or silver to protect exhaust wrap and a fiber woven inside made for
up to 1,500°F. Enough to cover a set of V8 severe-duty heat protection against
headers. Many other uses around the home or extreme heat-soak applications up to 1350°F.
shop. Hook-and-loop fastening system and can be trimmed to
Part No. Description size. Dimensions 24"L x 7"W. Sold each.
DSN10302 Aluminum, 12-oz. Can
Onxy Starter Shield
Locking Tie Tool
DSN10236
DSN10220 Provides reliable heat protection
DEI’s Locking Tie Tool just makes the for starters under severe duty or
installation of stainless steel ties extreme heat. Starters exposed
simpe! Uses a 1/4" drive ratchet and to heat soak often malfunction or
slide the tie into the slot and twist. Made have problems starting reliably.
from hardened steel with a black oxide finish. Dimensions 24"L x 7"W. Sold each.
Sold each.
Titanium Pipe/Exhaust Shield
Stainless Steel Positive Lock Ties Advancement thermal
Made from 316 stainless steel for protection LR (Lava Rock) fiber
high-heat exhaust applications, technology combined with high-
these positive lock ties can hold up temperature silica fabric for
to 350 pounds tensile strength. UV extreme heat protection around
and corrosion resistant, they can exhaust pipes up to 1,350°F. A
withstand temperatures in excess rivet-based stand-off bracket
of 2,500°F. design provides an air gap for
Part No. Description maximum heat dissipation and
DSN10208 Stainless Steel, 7mm x 9", 8 Pack cooling. Includes 4 pipe clamps.
DSN10209 Stainless Steel, 7mm x 14", 4 Pack Sold as a kit.
DSN10210 Stainless Steel, 7mm x 20", 10 Pack
Part No. Description
DSN10212 Stainless Steel, 12mm x 14", 4 Pack
DSN10450 Titanium Pipe Shield 6" Wide X 1' Long, Each
DSN10213 Stainless Steel, 12mm x 20", 10 Pack
DSN10451 Titanium Pipe Shield 6" Wide X 2' Long, Each
DSN10454 Titanium Pipe Shield 4" Wide X 12" Long, Each
Stainless Steel Locking
Ties
Secure exhaust wrap and other
insulated products, among
hundreds of other uses. Made
of 304 stainless steel, ties will
withstand 2,500°F and have a tensile strength of over 100
lbs. per square inch.
Part No. Description
DSN10201 8" Locking Ties, 4-Pack
DSN10202 14" Locking Ties, 4-Pack
DSN10205 Combo Pack 8-8" and 4-14"

136 2023 - 2024 HOT ROD AND EARLY MUSCLE

Gen 3 Titanium Turbo Shields Reflect-A-Cool
Gen 3 Turbo Shields are the Fiberglass material, backed with a
next evolution of turbo heat layer of aluminized reflective foil, can
management. Made with a silicone- handle direct continuous temperature
coated Titanium LR outer layer with of 400°F. Reflect-A-Cool can be
multiple stainless steel and silica trimmed to fit just about any shape. Just
inner layers for maximum strength measure, trim, face reflective side towards
and heat resistance, they are source of radiant heat, and remove self-adhesive
offered in multiple sizes. Available backing. Withstands 2000°F of radiant heat and virtually
individually, or in kits with the Turbo Shield, (1) 2" x 15' roll no clearance is needed.
of Titanium Wrap, (2) 20" stainless steel ties, and (1) 5' roll
Part No. Description
of fastening wire.
DSN10460 12" x 12"
Part No. Description DSN10461 12" x 24"
DSN10241 Gen III T4 Turbo Shield (Shield Only) DSN10462 24" x 24"
DSN10244 Gen III T3 Turbo Shield (Shield Only)
Gen III T25/28 Turbo Shield Kit with Wrap, Ties,
DSN10246
and Fastening Wire Cool-Tape
Cool-Tape protects wiring, cables, and
Universal Heat Shield Mounting Kit hoses from up to 2,000°F of radiant
heat. Aluminized 1 mil thick material
DSN10224 is bonded to fiberglass and includes a
Designed for rigid or semi-rigid self-adhesive backing for quick, easy
heat shields, this mounting application. Sold in 1-1/2" and 2" wide
kit includes (6) stainless steel rolls in 15', 30', and 60' rolls.
standoffs and mounting
Part No. Description
hardware to provide a 1/2" DSN10408 1-1/2" x 15' Roll
standoff. DSN10416 1-1/2" x 30' Roll
DSN10413 2" x 60' Roll
Stainless Steel Pipe Shields
Preformed shield with two Reflect-A-Gold
layers of 304 stainless steel A high-performance reflector
encapsulating high-temperature developed in the aerospace industry
insulation protect against up to for use in extreme temperature
2000°F radiant heat. Stainless swing environments, this state-
steel 1/2" tall air gap standoffs of-the-art polymer is extremely
included. lightweight and capable of handling
Part No. Description continual operating temperatures up to 850°F. Reflects
DSN10254 8-1/2" x 4-1/2" up to 80% of radiant heat and needs virtually no
DSN10255 6" x 12" clearance. Fire-resistant adhesive side rated up to 325°F.
Self-adhesive backing eases installation and removal.
Titanium Turbo Shields Part No. Description
DSN10391 12" x 12" Sheet
Shield looks like carbon fiber
DSN10392 12" x 24" Sheet
and is designed to reduce DSN10393 24" x 24" Sheet
turbo lag. Shields are available DSN10394 1-1/2" x 15' Roll
individually, or in kits with the DSN10395 1-1/2" x 30' Roll
Turbo Shield, (1) 2" x 15' roll of DSN10396 2" x 15' Roll
Titanium Wrap, (2) 20" stainless DSN10397 2" x 30' Roll
steel ties, and (1) 5' roll of fastening wire.
Part No. Description Heat Sheath
DSN10144
DSN10145
T4 Turbo Shield (Shield Only)
T4 Turbo Shield Kit with Wrap, Ties, and Fastening Wire
Gold™
DSN10146 T6 Turbo Shield (Shield Only) These heat sleeves
are constructed to
withstand up to 800°F direct
Gold Heat Shield heat, making them the ultimate protection from
Constructed from high-temperature heat, chemicals, oil and grease. Metalized polyimide
fiberglass base material and “Reflect- lamination bonded to a 20-oz. heat-treated glass-
a-Gold” outer facing, this heat base material keeps components cool in the hottest of
shroud will protect wiring, cables, conditions. Available in five different diameters, the 36"
and hoses from up to 800°F direct lengths are easily trimmed.
continuous heat. The hook-and-
Part No. Description
loop fastening material allows installation without
DSN10914 3/4" Diameter x 36" Long
removing the wire or cable and the 36" long sleeve is DSN10915 1-1/4" Diameter x 36" Long
easily cut to fit. DSN10916 1/2" Diameter x 36" Long
Part No. Description DSN10917 1" Diameter x 36" Long
DSN10458 Gold Heat Shield, 1/2" to 1-1/4" I.D. x 36" DSN10918 2-1/4" Diameter x 36" Long
DSN10924 Gold Heat Shield, 2" to 2-1/2" I.D. x 36"

2023 - 2024 HOT ROD AND EARLY MUSCLE 137

Titanium™ Exhaust Wrap Exhaust Wrap
This exhaust wrap is made from Controlling exhaust temperatures
pulverized lava rock, stranded into can increase horsepower and reduce
a fiber material and woven into under-hood radiant heat. High-
a proprietary weave. Extremely temperature fiberglass composite
pliable, the premium wrap will is coated to enhance heat retention
withstand 1800°F direct and and withstand continuous heat up to 2,000°F.
2500°F intermittent heat. The Part No. Description
high-tech carbon fiber-look material DSN10099 2" Wide x 25' Roll, Black
resists abrasion, oil spills, temperature DSN10101 1" Wide x 50' Roll, Natural
fluctuations, and vibration breakdown. Sold DSN10102 2" Wide x 50' Roll, Natural
each. DSN10105 1" Wide x 15' Roll, Natural
DSN10106 2" Wide x 15' Roll, Natural
Part No. Description
DSN10107 1" Wide x 50' Roll, Black
DSN10125 Titanium Exhaust Wrap, 2" x 33 ft.
DSN10108 2" Wide x 50' Roll, Black
DSN10133 Titanium Exhaust Wrap, 1" x 100 ft.
DSN10116 2" Wide x 100' Roll, Black
DSN10134 Titanium Exhaust Wrap, 4" x 100 ft.
DSN10120 1" Wide x 15' Roll, Black
DSN10135 Titanium Exhaust Wrap, 6" x 100 ft.
DSN10121 2" Wide x 15' Roll, Black
DSN10126 1" Wide x 50' Roll, Titanium
Exhaust Wrap Kit DSN10128 1" Wide x 15' Roll, Titanium
DSN10095 DSN10129 2" Wide x 15' Roll, Titanium
DSN10131 2" Wide x 25' Roll, Titanium
Everything needed DSN10132 2" Wide x 35' Roll, Titanium
for a professional
installation in one kit.
Includes two rolls of 2"
EXO Series™ Exhaust and Pipe Wrap
x 50' titanium exhaust The EXO Series™ unique
wrap, stainless steel construction of high-temp glass
locking ties (eight fiber and 304 stainless steel
8" and four 14"), and creates a premium exhaust wrap
locking tie tool. product designed to withstand
high heat, abrasion, and impact
protection. With its special 1-1/2"
Fuel Injector Reflective width, installation is easy on any application.
Heat Covers Available in black or tan.
Designed to fit most fuel Part No. Description
injectors, covers enable cooler DSN10077 1-1/2" x 10' Black Close up of the
and more efficient injector DSN10078 1-1/2" x 20' Black black wrap
operation, preventing heat soak
and vapor lock. Easily installed Heat Screen GOLD™
without removing the injector. DEI Heat Screen Gold™ wrap is
Part No. Description manufactured from .031" thick, high-
DSN10380 2-Pack temperature metalized polyimide
DSN10382 6-Pack lamination, bonded to 20-oz. heat-
treated glass- fiber material. This
Header/Motorcycle Exhaust Wrap Kit reflective barrier will provide direct
DSN10073 heat protection up to 800°F and radiant
heat up to 1,100°F. Attaches with either
Everything needed for a
mechanical fasteners or DEI Hi-Temp
professional installation in
Adhesive.
one kit. Includes two rolls of
2" x 50' black titanium exhaust Part No. Description
DSN10913 36" x 40"
wrap, stainless steel locking
DSN10919 24" x 24"
ties (eight 4" and four 8"), and
locking tie tool.
Aluminized Plug Wire Sheath
DSN10409
Pipe Wrap Kits Aluminized plug wire sheath,
Pipe wrap kits include the same high- manufactured from high-temp
temperature fiberglass composite wrap as fiberglass fabric that is bonded to a
individual rolls and stainless steel locking reflective, aluminized material, offers
ties. exceptional spark plug wire protection.
Capable of withstanding up to 2,000°F of radiant heat,
Part No. Description
DSN10119 2" Wide x 25' Roll of Black Wrap, (4) 8" Stainless Ties
sheath is equally suited as protection to electrical wiring,
DSN10123 2" Wide x 25' Roll of Titanium Wrap, (4) 8" Stainless Ties hoses or cables. Sold in four packs, 3/4" dia. X 6" long.

138 2023 - 2024 HOT ROD AND EARLY MUSCLE

Heat Shroud Easy Loom™ • Master Kit
Fireproof and easily shaped, Heat DSN10663
Shroud can be installed to protect Everything
cables, hoses, and wires without needed to
removing them. Fits 1/2" to 1-1/4" protect and
diameters. 1" dia. x 3' long. Offered in restore factory
3' or 50' lengths. or aftermarket
Description 3' Long Part No. 50' Long Part No. wire harnesses.
1/2" To 1-1/4" Dia. DSN10405 DSN93404 Easy Loom™
sleeves are split for easy installation without having to
remove wires or cables. This self-closing design with
Heat Sheath™ 30% overlap is far superior in style and function to plastic
Constructed from a high- tubing. Kit includes 5 different Easy Loom™ sleeves from
temp fiberglass fabric 3/16" to 1" diameter, shrink tube ends, silicone tape, lock
bonded to an aluminized ties, and electrical tape.
material with sides sewn together to form a sleeve.
Designed to slide over wires, cables, and hoses to provide
the ultimate fireproof protection from oil, dirt, and road Fire Sleeve and Tape Kit
grime. Five diameters available. Withstands 500°F direct
Woven braided fiberglass sleeve,
continuous and 2000°F of radiant heat. Reflects 90%
covered with 100% iron oxide silicone
of radiant heat away from wires, cables and hoses, and
rubber sleeve is capable of withstanding
easily trim to length. Offered in 3' or 50' lengths.
2,000°F intermittently, 500°F continuously
Description 3' Long Part No. 50' Long Part No. and will protect wires, hoses, oil, and fuel lines from
1/2" Dia. DSN10418 DSN93418
underhood heat. Offered in 3' or 25' lengths.
3/4" Dia. DSN10403 DSN93403
1" Dia. DSN10419 DSN10419B50 Description 3' Long Part No. 25' Long Part No.
1-1/4" Dia. DSN10404 — 3/8" I.D. DSN10470 DSN92470
1-1/2" Dia. DSN10420 DSN93420 5/8" I.D. DSN10472 DSN92472
1" I.D. DSN10474 DSN92474

Vapor Block Sleeve

Designed to help keep fuel
lines cooler and prevent Chill Charger
vapor lock, Vapor Block is DSN40208
made with glass fiber and Chill Charger is a specialized additive
polyester laminated to an aluminum outer layer. A split designed to maximize thermal transfer
design and adhesive flap makes installation easy. Great in intercoolers, lowering the intake
heat protection for wiring, hoses, and other lines, as well. temperature and reducing liquid heat soak
Part No. Description in turbocharger and supercharger systems.
DSN10671 Vapor Block Sleeve, 3/8" x 36" It also helps protect against corrosion,
DSN10672 Vapor Block Sleeve, 1" x 36" electrolysis, and mineral build-up. Sold in
16-oz. bottles.

Ultra Sheath MA™

Constructed from a process that impregnates
molten aluminum (MA) to the core fabric, High-Temperature Spray Adhesive
giving it higher reflective properties.
Can sustain heat up to 1100°F and is
DSN10492
more flexible than standard foil Great for bonding foam, fabric, metals, wood,
or bonded aluminum products. and DEI's heat- and sound-absorbing barriers,
this high-build, pressure-sensitive adhesive
Part No. Description is resistant to radiant heat up to 200°F. Sold in
DSN10230 1/2" I.D. x 3'
DSN10232 3/4" I.D. x 3'
13.3-oz. spray can.
DSN10233 1-1/4" I.D. x 3'

2023 - 2024 HOT ROD AND EARLY MUSCLE 139

Fire Tape Heat Screen™ with Adhesive Backing
DSN10476 DSN10400
Ideally used with Fire Sleeve and other Reflects unwanted heat from areas
DEI line and hose protective sleeving and surfaces needing protection.
products, non-adhesive, silicone Withstands 2,000°F of radiant heat and
rubber tape is self-bonding and self- the adhesive-backed aluminized mylar
curing. Fire Tape is engineered to radiant matting is only .060" thick.
withstand up to 475°F of direct, continuous heat and is
sold in a 1" wide x 36' long roll.

Form-A-Barrier
Vapor Block™ Fuel Line Sleeve This lightweight rigid shield will
DSN10669 provide thermal protection up
This sleeving was developed specifically to 1,300°F. Manufactured with
to prevent fuel line vapor reflective material on both sides
lock. The split design and easily formed to fit odd shapes
sleeving with adhesive and spaces.
flap is manufactured from Part No. Description
glass fiber and polyester DSN11002 Form-A-Barrier, 12" x 12"
DSN11013 Form-A-Barrier, 12" x 24"
laminated to an aluminum
outer layer.
1/2" x 36". Sold each. Under Carpet (UC)
DSN50101
Ideal for use as a second layer over
GM LS Engine Coil Pack Heat Shield Boom Mat acoustical material. Provides
DSN11001 additional sound-deadening benefits,
These semi- while protecting interior from heat and cold. May be
rigid shields are secured in place on vertical surfaces using DEI Hi-Temp
manufactured Spray Adhesive. 48" x 54" (18 sq. ft.).
from double-
sided aluminum Under Carpet Lite (UC Lite)
and high-temperature foam core. Designed to work with Multi-layered lightweight
both factory and aftermarket coils and brackets. Easily composite material offers superior
installed under the coil brackets to reduce engine and thermal and noise insulation.
exhaust heat to the coils. Sold in pairs. Flexible product is well suited to
trunks, door liners, rear decks,
headliners, and more.
Super Bright LED's Part No. Description
Great anywhere an accent light is DSN50111 48" x 60" (20 sq. ft.)
needed, such as license plates,
interior, engine compartment, map Under Hood Thermal Acoustic Lining
lights, etc., and they are easy to install.
DSN50130
Part No. Description
Protect expensive paint jobs while
DSN30301 Satin Lighted License Plate Bolt Kit
DSN30309 Polished Lighted License Plate Bolt Kit
reducing noise and vibration. Peel
and stick installation. Sold in 32" x
54" (12 sq. ft.) roll.
Heat Screen
Aluminized radiant screen is capable of
withstanding heat up to 2000°F. Screen
can be applied with a high-temperature Floor and Tunnel Shield (FT II)
glue or fastened with screws or rivets. Modern, multifaceted aluminum
Each screen is 36" x 40". surface can withstand up to 1,750°F
of direct continuous heat. Works
Part No. Description
DSN10071 Heat Screen, 12" x 24" great on transmission tunnels,
DSN10401 Heat Screen, 36" x 40" firewalls, floor boards, fuel cells, etc.
Part No. Description
DSN50506 21" x 42"
DSN50507 24" x 21" (3.5 sq. ft.)
DSN50508 48" x 21" (7 sq. ft.)

140 2023 - 2024 HOT ROD AND EARLY MUSCLE

Flex Damping Material Kit Air Intake Cover Kit
DSN50225 DSN10486
Designed for applications This 13" x 28" Gold Cool Cover is
needing a damping material that designed to keep air intake tubes
can conform to odd shapes and cool and protected. Designed
tight bends. Made from high- to fit 3"-4" diameter tubes, with
quality 2.5mm thick butyl rubber hook-and-loop closure material for
with a clear poly surface that can simple and quick installation. Easy
be used around curves, inside to cut and trim to size.
wheel wells, and around tubing and pipes. Aggressive
adhesive backing allows it to be shaped and firmly Flexible Exhaust Heat Shields
secured around any surface. Kit includes four 12" x 12" Using a stainless standoff bracket, these upgraded
sheets. flexible heat shields can be
adjusted to fit a wide range
D-Mat Insulation of exhaust pipe diameters.
Extremely Designed to work as OEM
lightweight and replacements, over exhaust
pliable, Advanced wrap, or even doubling up over
Thermal-Acoustic existing metal heat shields
insulation is for the ultimate protection.
designed for under head liners, doors, and package Manufactured with a metal
trays. At only 12MM thick, compressable, and pliable, trim ring for a clean, classy
D-Mat can be used in even the most difficult areas to appearance. Kit includes
insulate, providing thermal protection and keeping a stainless steel mounting hardware.
vehicle’s interior cool. Made from a polymer blend with Part No. Description
a scrim backing, it can be used in applications up to DSN10900 Brushed Black Onyx, 3.5" x 6.5"
325°F while showing up to a 65% reduction in heat. Meets DSN10902 Brushed Black Onyx, 4.0" x 8.0"
flammability rating and is mildew and bacteria resistant. DSN10926 Oynx Double Black, 3.5" x 6.5"
Not recommended for floor use. Sold each. DSN10927 Oynx Double Black, 4.0" x 8.0"
DSN10901 Brushed Titanium, 3.5" x 6.5"
Part No. Description
DSN10903 Brushed Titanium, 4.0" x 8.0"
DSN50411 60" x 70" Sheet, Each

Oil Filter Covers

Floor and Tunnel Shield/Heat Oil filters are often positioned very close to
the engine and oil pan, with little airflow. Oil
and Sound Insulation filter covers install easily to block engine
Perfect as interior covering for floors heat and keep the filter cool, reducing oil
or transmission tunnels, unique temperatures. Two sizes of universal trim-
material is designed to withstand to-fit covers are designed to work on all
direct temperatures up to 1,750°F, filters. Sold in 3-pack.
while capable of reducing road noise
Part No. Description
by up to 50%. Product is manufactured DSN10740 3.5" - 4.5" 3 Pack
using an embossed 10-mil aluminum DSN10741 2.5" - 3.5" 3 Pack
face bonded to composite fiberglass
insulation and backed with an adhesive Oil Rug
for quick, easy application. Shield is just 3/16" thick,
No matter how hard
allowing minimal clearance, easy shaping, and quick
you try, it seems like oil
trimming during installation. Sold in 21" or 42" wide rolls.
gets everywhere when
Part No. Description doing engine work.
DSN50501 2' x 21"
The Oil Rug contains
DSN50502 4' x 21"
DSN50503 4' x 42"
drips and spills,
making clean-up easy.
Great for use on work
benches, under the car
during oil changes, and
more. Sealed edges trap up to 16 oz. of oil. Available in 3
sizes.
Part No. Description
DSN10751 18" x 24" Oil Rug
DSN10752 29" x 48" Oil Rug

2023 - 2024 HOT ROD AND EARLY MUSCLE 141

Street Demon Carburetors Street Demon Calibration Kits
Redefine street carburetors with clean looks and ease of DMN1921
use. They offer enthusiasts a straightforward design to
Calibration kits include an
deliver stable idle, amazingly crisp throttle response, and
assortment of metering rods,
smooth performance. With optimized calibration and a
jets, and step-up springs to fine-
dual mounting pattern, they are ready to run, right out of
tune your application. Kit includes
the box. The carburetors feature an integrated fuel bowl/
primary main jet assortment,
main body design with the gasket above fuel level and
secondary main jet assortment,
have no plugged passages, eliminating all potential leak
metering rod assortment step up
paths. Available with polished or black ceramic coating.
spring assortment, and plastic yellow
Electric choke.
storage case.

Street Demon Carburetor Rebuild Kits

When it's time to rebuild your
Demon carburetor, you'll need
one of these Demon Carburetion
carburetor rebuild kits. They
include every possible gasket
and seal you'll need, along with
many parts not included in other
Black Ceramic
kits, like detailed instructions
Description Polished Finish Bowl Type Polished and a power valve. Kits include
Coating
625 CFM Ball Burnished Aluminum DMN1900 — standard gaskets for fuel bowl,
625 CFM Ball Burnished Composite DMN1901 DMN1901BK metering block, and bowl screws.
750 CFM Ball Burnished Composite DMN1904
Part No. Description
750 CFM Ball Burnished Aluminum DMN1903 —
DMN1920 Rebuild Kit for 625 CFM

Detroit Locker® Detroit Truetrac® Eaton Posi

The Detroit Locker maximizes Truetrac’s proven helical gear Carbon friction discs, located behind each
traction by delivering 100% of design eliminates wearable parts side gear, are pre-loaded with a central spring
the torque to both drive wheels. like friction plates, cones, and assembly, increasing the clamp load on the
It is engineered to keep both springs, providing maintenance- carbon discs as input torque increases. This
wheels in a constant drive free traction. Power transfer is so balanced design ensures that the bias torque
mode, and automatically allows smooth it literally goes unnoticed by of the differential is proportional to the input
wheel speed differentiation. the driver. Proven design, low cost, torque for smoother engagement. Features
Legendary traction and ultimate and effective performance all make race-bred carbon friction technology, precision-
performance. Use any gear lube. the Truetrac limited slip differential forged gears, high-strength case, and superior
Most gear oils are sufficient, the ideal choice for a wide variety rebuildable design. Use a petroleum gear lube with
however, a quality petroleum- of vehicles. A quality, petroleum- a friction modifier. A quality GL5-rated petroleum-
based oil is recommended. mineral based, GL5 rated 80W-90W based oil is recommended. The addition of a
gear oil should be used. Do not use 4-oz. bottle of friction modifier is necessary for
friction modifiers. optimum performance.

Axle Shaft Dia., Ring Gear Detroit Detroit Eaton

Year / Description No. of Splines Pinion Ratio Locker Truetrac Posi
Ford
Detroit
1976-87 9" Dia., R.G. 1.50", 35 All Exc. 2.72 DET187S160A — — Locker
1976-87 9" Dia., R.G. 1.32", 31 All Exc. 2.72 DET187SL17B DET913A586 —
1987-12 8.8" Dia., R.G., C-Clip 1.32", 31 All DET187C145A DET913A561 DET19588-010
1983-12 8.8" Dia., R.G., C-Clip 1.20" 28 All — DET912A562
GM Detroit
1988-05 7.5/7.6" Dia. 10-Bolt R.G., C-Clip 1.20", 28 3.23 And Up — DET912A317 — Truetrac
3.23 And Up DET911A319
1976-88 7.5" Dia. 10-Bolt R.G., C-Clip 1.16", 26 — —
3.08 And Down
1965-83 8-7/8" Dia. 12-Bolt 33 4.10 And Up — DET914A575 —
1968-72 8-7/8", 12-Bolt Car 1.29", 30 3.08-3.90 — DET913A555 DET19554-010
1989-05 8.5", 10-Bolt Car* 1.32", 30 2.73-5.13 — DET913A481 DET19559-010 Eaton
1971-89 8.5", 10-Bolt* 1.20", 28 2.73 And Up — — DET19557-010 Posi
1975-89 7.5", 10-Bolt 1.16", 26 3.23 And Up — — DET19663-010
* All GM 8.5"/8.6" Eaton differentials require special bearings. For axles with small bearing bores (race OD of 2.89"), usually found on vehicles prior to 1999, bearing
LM102949 and race LM102911 are required. For axles with large bearing bores (race OD of 3.06"), usually found on vehicles from 1999 to present, bearing LM603049 and
race LM603012 are required.

142 2023 - 2024 HOT ROD AND EARLY MUSCLE

Tornado Electric Fans
Tornado electric fans with exclusive “Swept Wing” design
are more efficient than conventional straight-blade fans,
and reduce amperage draw. Outer rings reduce operating
vibration and the metal rod mounting systems provide
easy, reliable installation. Tornado fans can be altered to
function as pullers or pushers by turning the blade over and
reversing motor polarity. Replacing a standard belt-driven
fan with a Tornado will improve gas mileage and reduce drag while robbing less
horsepower. Mounting kit included.
Part No. A B C D E F G H RPM CFM Amp Draw
DER16618 8.25" 8" 2.375" 45° — 8" — 1.375" — 500 4.8
DER16619 9.625" 9.5" 2.5" 45° — 9" — 1.25" — 570 5.4
DER16620 11.14" 10.60" 2.60" 45° 5.20" 19.3" 1.26" 1.57" 2700 650 5.3
DER16622 12.52" 11.50" 2.40" 45° 5.87" 17.7" 1.26" 1.42" 2100 880 8.8
DER16624 14.09" 13.54" 3.56" 45° 7.51" 16.93" 1.26" 1.61" 1750 1350 10.5
DER16626 16.69" 15.75" 4.17" 45° 8.13" 24.02" 1.26" 1.73" 1680 2175 18.4

High-Output Extreme High-Output Dual Rad

Curved Blade Fans Molded Shroud Fans
High-performance primary cooling fans High-output 265-watt
have powerful, high-watt/high-torque motors, curved blades,
IP68-certified motors that will last up and injection-molded
to three times longer. All are pullers and shroud make these dual
include mounting kit and instructions. puller-style fans super
Amp coolers. A mounting kit
Part No. Description CFM Draw and dual relay harness are
DER16109 9" High-Output Fan 625 — included.
DER16110 10" High-Output Fan 802 9.2
Part No. CFM RPM AMP Draw Width Height Thickness
DER16112 12" High-Output Fan 1328 14.2
Dual 13"
DER16114 14" High-Output Fan 1864 21.5 DER16927 1670 50.0 26" 18" 3.19"
4000
DER16116 16" High-Output Fan 2024 21.0
Dual 13"
DER16928 1670 50.0 28.5" 13.82" 3.19"
4000
High-Output Extreme Curved DER16934
Dual 14"
1670 50.0 31.62" 15.75" 3.19"
4000
and Paddle Blade Fans
Designed for maximum performance
at high static pressure loads for more High-Output Dual Rad DER16836
effective cooling in puller applications. Aluminum Shroud Fans
Amp High-output 265-watt motor.
Part No. Description CFM Draw Designed for maximum
DER16105 5" High Output Fan 315 3.6 performance at high static
DER16918 12" High Output Fan 1350 16.0 pressure loads for more
DER16818 effective cooling. All include
High-Output Single Rad aluminum shroud, mounting kit,
Aluminum Shroud Fans and illustrated installation instructions.
High-output 265-watt motor. Puller (engine side) applications only.
Designed for maximum performance CFM
at high static pressure loads for more High/ AMP Draw Shroud Overall
Part No. Low High/Low Width Height Depth Depth
effective cooling. All include aluminum DER16836* 4000 24.8/24.8 26-3/8" 16" 2-3/4" 4"
shroud, mounting kit, and illustrated DER16837* 4000 24.8/24.8 27" 18" 2-3/4" 4"
installation instructions. Puller (engine side) applications DER16838* 4000 24.8/24.8 28-1/4" 17" 2-3/4" 4"
only. DER16842* 4000 24.8/24.8 26" 18" 2-3/4" 4"
DER16927† 4000 24.8/24.8 26" 18" 2-3/4" 3-7/16"
AMP
CFM Draw Shroud Overall DER16830† 3750 18.7/18.7 22-1/2" 19" 2-3/4" 4-1/2"
Part No. High/Low High/Low Width Height Depth Depth DER16831† 3750 18.7/18.7 24" 15-1/2" 2-3/4" 4-1/2"
Single Speed Fans DER16833† 3750 18.7/18.7 24" 17" 2-3/4" 4-1/2"
DER16820 2000 24.8 20" 16-3/8" 2" 2-3/4" * Fans require two separate turn-on sources.
DER16827 2000 24.8 23-7/16" 15-7/16" 2" 2-3/4"
† Powder-coated Steel Shroud.
2 Speed Fans
DER16818* 2400/1800 23.5/17.4 18" 18" 1-1/18" 3"
DER16823* 2400/1800 23.5/17.4 21" 16-3/4" 1-1/8" 3"
DER16828* 2400/1800 23.5/17.4 24" 17" 1-1/8" 3"
* Fans require two separate turn-on sources.

2023 - 2024 HOT ROD AND EARLY MUSCLE 143

PWM Integrated Electric Fan Accessories
Powerpacks Hassle-free operation
The ultimate in engine with no manual switch to
temperature control. The remember. Control single
benefits of high-output fans or dual fan configurations.
and the smart technology of the Complete wiring harness
PWM electric fan controller all in for easy installation, blade
one kit. Available with various type fuse and holder.
shroud and fan sizes, including Part No. Description
single or dual fans. Made in USA. Single-Stage Controller—15 Amp
Push-In and 3/8"NPT Thread-In Probes
Part No Width Height Overall Depth DER18735
Preset to “On” at 180°F and “Off” at 165°F
Single Fan
Single-Stage Controller—25 Amp
A17 Powerpack - 2400 CFM @ Full Speed
Push-In and 3/8"NPT Thread-In Probes
DER66821 20-3/4" 17-5/8" 3" DER16735
Preset to “On” at 180°F “Off” at 165°F
DER66822 22-1/4" 17-5/8" 3" Push-In Radiator Probe, Preset to “On” at 180°F.
Dual Fan DER16738
“Off” at 165°F
A12 Powerpack - 4000 CFM @ Full Speed 3/8"NPT Thread-In Probe,
DER66838 28-1/4" 17" 4" DER16739
Preset to “On” at 180°F. “Off” at 165°F
DER66842 26" 18" 4" Adjustable Controller—25 Amp
A11 Powerpacks - 3750 CFM @Full Speed DER16749 3/8"NPT Thread-In Probe, Activation Range of 150° to 240°F
DER66830 22-1/2" 19" 4-1/2" DER16759 Push-In Radiator Probe, Activation Range of 150° to 240°F

PWM Fan Controllers Mounting Rod Kits

Pulse width modulation constantly Mount most electric fans or transmission
adjusts fan speed to maintain coolers to any radiator with one of Derale’s
preset desired temperature mounting rod kits.
regardless of changing needs and Part No. Description
environmental conditions. The fan Nylon, Mount Kit Includes
DER13001
control thermostats can operate 4 Plastic Rods, Pads, and Retainers
multiple fans, are available with Nylon Mounting Kit, Includes DER16744
DER16744
65- or 70-amp capacity, and include multiple built-in 4 Plastic Rods, Clips, and Pads
protections. Black finned 6061 aluminum housing. Same as DER16744,
DER16742
Includes Lighted Toggle Switch
Part No. Description Metal Mounting Kit Includes
DER16795 PWM Fan Controller, 65-Amp Capacity DER13063
4 Metal Brackets w/ 1/4" Hardware
DER16797 PWM Fan Controller, 70-Amp Capacity Metal Mounting Kit, Includes
DER16743
4 Metal Rods, Clips, and Pads.
High-Amperage Adjustable
Fan Controllers Heat Sink Coolers
Available to control on/off External and internal fins transfer
functions of single and dual fan heat with minimal airflow. Small
installations, Derale controllers enough to be mounted to a frame rail,
can handle up to 35 amps radiator bottom or under floorboards. Single-pass (1/2"
per fan. Interchangeable fan NPT female port on each end) or dual-pass (3/8" NPT
probes are available in push-in female ports on one end) coolers are suited for cooling
radiator and 3/8"NPT threaded transmission fluid, fuel, engine oil, power steering, or
DER16788
designs. gear lube. Clear or black anodized finish. Hardware and
hose included.
Part No. Description
DER16778 Single Fan Controller, Adj. 150-240° F, Push-in Probe Part No. Description Finish Dimensions
DER16779 Single Fan Controller, Adj. 150-240° F, 3/8"NPT Probe Single-Pass Coolers
DER16788 Dual Fan Controller, Push-In Probe DER13253 12" Trans Cooler Kit Clear 14-1/4" x 3-1/4" x 3"
DER16789 Dual Fan Controller, 3/8"NPT Probe DER13254 15" Trans Cooler Kit Clear 17-1/4" x 3-1/4" x 3"
DER13255 18" Trans Cooler Kit Clear 20-1/4" x 3-1/4" x 3"
DER13256 24" Trans Cooler Kit Clear 26-1/4" x 3-1/4" x 3"
Relay Wire Harness Kits DER13269 10" Trans Cooler Kit Black 10-1/4" x 3-1/4" x 3"
Relay harness kits have a DER13270 12" Trans Cooler Kit Black 14-1/4" x 3-1/4" x 3"
continuous load rating of 25 amps DER13271 15" Trans Cooler Kit Black 17-1/4" x 3-1/4" x 3"
and peak ratings of 40/60 amps DER13272 18" Trans Cooler Kit Black 20-1/4" x 3-1/4" x 3"
to handle the initial current spike DER16763 DER13277 24" Trans Cooler Kit Black 25-1/4" x 3-1/4" x 3"
when a fan kicks first kicks on. Dual-Pass Coolers
DER13263 12" Trans Cooler Kit Clear 14-1/4" x 3-1/4" x 3"
DER13264 15" Trans Cooler Kit Clear 17-1/4" x 3-1/4" x 3"
Part No. Description
DER13265 18" Trans Cooler Kit Clear 20-1/4" x 3-1/4" x 3"
DER16763 40-/60-Amp Single Relay Wire Harness
DER13266 24" Trans Cooler Kit Clear 26-1/4" x 3-1/4" x 3"
DER16764 40-/60-Amp Relay
DER13280 12" Trans Cooler Kit Black 14-1/4" x 3-1/4" x 3"
DER16765 40-/60-Amp Dual Relay Wire Harness
DER13281 15" Trans Cooler Kit Black 17-1/4" x 3-1/4" x 3"
DER13282 18" Trans Cooler Kit Black 20-1/4" x 3-1/4" x 3"
DER13287 24" Trans Cooler Kit Black 25-1/4" x 3-1/4" x 3"

144 2023 - 2024 HOT ROD AND EARLY MUSCLE

 DER13107

Series 9000 Plate-and-Fin Series 7000

Transmission Coolers and Cooler Kits Transmission
Engineered to extend
transmission life, Coolers
coolers feature high- Silver-brazed copper
flow, 1-1/4" turbolators tubing has aluminum fins for greater heat dissipation.
to maximize cooling Features include a 360° tube-to-fin bond, Derale’s
efficiency, and include patented Turbulators for increased cooling, edge guards,
1/2" NPT female cooler and satin black powder coating. Available in five GVW
ports. Coolers are ratings.
constructed from furnace-brazed aluminum and are Part No. GVW Rating Size Hose End
available with just the cooler, or as a kit complete with DER13101 12,000 lbs. 5"W x 12"L x 3/4"D Push-On
high-pressure/high-temperature hose, required fittings, DER13311 12,000 lbs 13-1/2"W x 15-1/8"L x 3/4"D Push-On
DER13102 14,000 lbs. 5"W x 17"L x 3/4"D Push-On
and hardware.
DER13107 18,200 lbs. 12-3/4"x 10-1/4"x 3/4" Push-On
Part No. Rows BTU Dimensions DER13103 18,500 lbs. 7-1/2"W x 17"L x 3/4"D Push-On
Cooler Kits DER13104 20,500 lbs. 10"W x 17"L x 3/4"D Push-On
DER13611 5 12,500 9-3/4" x 4-1/8" x 1-1/4" DER13318 20,500 lbs 13-1/2"W x 12-5/8"L x 3/4"D Push-On
DER13612 9 14,000 9-3/4" x 6-1/4" x 1-1/4" DER13105 22,500 lbs. 12-1/2"W x 17"L x 3/4"D Push-On
DER13613 13 21,000 9-3/4" x 8-7/16" x 1-1/4"
DER13614 17 23,500 9-3/4" x 10-5/8" x 1-1/4"
Cooler Only
Electra-Cool Remote Oil Cooler
DER33602 9 14,000 9-3/4" x 6-1/4" x 1-1/4" Large-capacity 16-pass tube and fin cooler combines
DER33603 13 21,000 9-3/4" x 8-7/16" x 1-1/4" a copper/aluminum core with a high-flow 650 CFM 10"
Tornado reversible electric fan for maximum cooling in
any environment, for up to 25,000 lbs. GVW. Cooler cores
Transmission Pan Coolers have either -6AN (3/8" I.D.) or -8AN (1/2" I.D.) inlets; hose
Cooler has corrosion-resistant barb adapters are included if not
black PTFE coating and unique using AN hose. Overall size 10"
turbulator in each air tube. tall, 12-1/2" wide, and 4" thick.
Replaces stock pan and uses Cooler kits include fan, cooler
factory filter and pick up tube. Cool air flowing beneath core, and anodized aluminum
vehicle will pass through the cooling tubes, extracting brackets only. Complete kits also
heat. Gasket included. Has 1/8"NPT temperature sending include fan control thermostat,
port and magnetic drain plug. 10' of hose, mounting hardware,
Part No. Description
and adapter fittings.
DER14200 GM Turbo 350 Complete Kit Cooler Kit Description
DER14201 GM Turbo 400 DER13900 DER13700 AN-6, 3/8" I.D. Inlets
DER14202 GM Turbo 400 Deep Pan DER15900 DER15800 AN-8, 1/2" I.D. Inlets
DER14204 GM 700R4/4L60E
DER14207 GM 4L80E Atomic-Cool Remote Oil Cooler
DER14208 Ford 4R100, E40D, 5R110. 5R110W
DER14210 Dodge A618, A727, 46RW, 46RH, 47RE, 48RE
Cooler provides the largest temperature drop of any
fan mounted cooler, and is rated for up to 26,500 lbs.
Electra-Cool Dual Circuit GVW. The high-efficiency “radiator style"fin-and-plate
Oil Cooler/Fan Assemblies cooler core maximizes heat dissipation and minimizes
DER15200 oil pressure drop, especially important on late model
electronic overdrive transmissions. Cooler core has
Dual-circuit reversible 10" fans move
either -6AN (3/8" I.D.) or -8AN (1/2" I.D.) inlets; hose barb
650 CFM through coolers with -8AN
adapters are included if not using AN hose. Overall size
inlets. Each will cool any two systems
10" tall, 12-1/2" wide, and 4" thick.
including engine, transmission, power steering, and fuel.
Cooler kits include a 400 CFM
8" diameter Tornado reversible
19-Row Series 10000 Stack Plate fan, cooler core, and anodized
Transmission Cooler Kit aluminum brackets only.
Complete kits also include fan
DER13403 control thermostat, 10' of hose,
This highly efficient kit extends mounting hardware, and adapter
transmission life by preventing fittings.
heat-related transmission failures
Complete Kit Cooler Kit Description
while also improving shifting
DER13950 — -6AN, 3/8" I.D. Inlets
performance. This kit comes DER15950 DER15850 -8AN, 1/2" I.D. Inlets
with a complete transmission
cooler hardware kit, including
-6AN aluminum fittings and hose
barb adapters, to easily install onto vehicles with 5/16"
transmission cooler lines.

2023 - 2024 HOT ROD AND EARLY MUSCLE 145

Heavy-Duty Engine Oil Cooler Dual-Circuit
Modern engines run hotter Fluid Coolers
and have a higher operating Coolers use 1/2" copper
RPM range. As a result, the tubing expanded into
risk of oil breakdown and loss formed aluminum cooling
of viscosity due to the higher fins. Coolers can cool two
oil temperatures is greater. systems and are available
The Derale heavy-duty engine with push-on or -8AN inlets. Black powder-coated finish.
oil cooler kit assures that the 13302 has (2) 11/32" and (2) 1/2" barbs.
engine will have an extra edge
Part No. Description
of protection against failure. Kits are supplied with 10 DER13302 Dual-Circuit Oil Cooler, 4 and 6 Pass
ft. of high-temp oil line, a thermostatically controlled DER15301 Dual-Circuit Oil Cooler, 8 and 8 Pass, -8AN
sandwich adapter, and all other required hardware.
Part No. Description Stacked Plate Cooler Kits
DER15502 GM 4 Cylinder/V6, Ford, Chrysler
DER15503 Chevrolet Small Block/Big Block DER51910
The most efficient
Series 6000 heat exchangers
currently available.
Aluminum Power Steering Kits Well suited for use as
These all-aluminum coolers are a perfect addition to engine, transmission,
today's hotter running cars power steering, or
and trucks. They help keep differential coolers.
underhood ambient Furnace-brazed
temperatures from aluminum coolers feature four integrated mounting
overheating your points for an easy installation and are offered with choice
power steering pump, of -6, -8, or -10AN ports. Sold complete with required
extending service life fittings.
and maintaining steering
feel and performance. No. Of Rows Inlet Size Width Height Depth
19 -10AN Male 13" 7-9/16" 2"
Part No. Description
1/2" Aluminum Tubing Expanded into Aluminum Cooling Fins,
DER12200
11/32" Hose Barb Inlets, Hardware Kit Included Engine Oil Filter Relocation Kits
1/2" Copper Tubing Expanded into Aluminum Cooling Fins, Oil filter relocation
DER13213 11/32" Hose Barb Inlets, Extruded Plastic Cooling Fin Guards, kits allow for
Hardware Kit Included oil filter to be
moved to a more
In-Line Fluid Thermostats convenient
Thermostats have a 180°F preset DER15749
location for
turn-on temperature and the turn- faster and easier
off temperature is preset at 165°F. filter change
Thermostats are available in -6AN or and is ideal for
-8AN aluminum housing and include engine swaps.
brass hose barb fittings. Kits increase oil
Part No. Description capacity and are
DER13021 -6AN x -6AN available in single
DER15721 -8AN x -8AN and dual filter mounts. Included in kits are 10' of 1/2"
OEM spec hose and the filter mount uses Fram PH8A or
In-Line Fluid Thermostats equivalent. All hardware is included.
with AN Fittings Part No. Engine Filter
Thread Filter Inlet/
Outlet
Premium series thermostats are available with Thread Size Landing
Size Ports
180°F and 190°F turn-on temperature settings Single Mount— Ports Up
and will turn off 15°F below turn-on temperature. DER15717 18 x 1.5 mm 3/4"-16
2-1/2",
1/2"NPT
Choose -6AN, -8AN, or -10AN aluminum fittings 2-3/4"
2-1/2",
with blue anodized swivel housings. DER15718 20 x 1.5 mm 3/4"-16 1/2"NPT
2-3/4"
Part No. Description 2-1/2",
DER35020 In-Line Fluid Thermostat, 180°F, -6AN DER15725 22 x 1.5 mm 3/4"-16 1/2"NPT
2-3/4"
DER35021 In-Line Fluid Thermostat, 180°F, -8AN 3/4"-16, 13/16"-16, 2-1/2",
DER35022 In-Line Fluid Thermostat, 180°F, -10AN DER15748 18 x 1.5 mm, 20 x 1.5 mm, 3/4"-16 2-3/4", 1/2"NPT
DER35025 In-Line Fluid Thermostat, 190°F, -6AN 22 x 1.5 mm 3-1/2"
Dual Mount—Side Ports
3/4"-16, 13/16"-16, 2-1/2",
DER15749 18 x 1.5mm, 20 x 1.5 mm, 3/4"-16 2-3/4", 1/2"NPT
22 x 1.5 mm 3-1/2"

146 2023 - 2024 HOT ROD AND EARLY MUSCLE

Hyper Cool Remote Mount Engine Spin-On
Fluid Coolers Adapter Kits
Extend engine and transmission This spin-on adapter
life! High-efficiency stacked plate provides external oil lines
cooler with 500 CFM reversible for remote filter mounts
tornado electric fan provides and oil coolers. The
optimum airflow. Mounts anywhere space permits. adapter kits have a new DER15747
billet-style design with a
Cooler Assembly - Includes complete cooler assembly, bright, polished finish.
two aluminum AN fittings (-6AN, -8AN or -10AN) and two
brass hose barb fittings (-6AN x 3/8" barb, -8AN x 1/2" Kit Part Ports Engine Thread Sizes O-Ring Dia.
No.
barb, or -10AN x 1/2" barb) DER15704 1/2"NPT 18 x 1.5 mm 2-1/2", 2-3/4"
Transmission Cooler Kit - Includes complete cooler 2-1/2", 2-3/4",
DER15705 1/2"NPT 13/16"-16
3-1/2"
assembly, two aluminum AN fittings (-6AN or -8AN), four
DER15706 1/2"NPT 20 x 1.5 mm 2-1/2", 2-3/4"
brass hose barb fittings (-6AN x 3/8" barb or -8AN x 1/2" DER15724 1/2"NPT 22 x 1.5 mm 2-1/2", 2-3/4"
barb), 180°F in-line thermostat, 10 feet of OEM spec hose. 3/4" -16, 13/16" -16, 18 x 1.5 mm, 2-1/2", 2-3/4",
DER13960 includes two aluminum -6AN cooler fittings, DER15747 1/2"NPT
20 x 1.5 mm, 22 x 1.5 mm 3-1/2"
two 5/16" x 3/8" hose barb compression fittings, and two DER15746 1/2"NPT 3/4" -16 2-1/2", 2-3/4"
3/8" x 3/8" compression fittings. DER15960 includes two
aluminum -8AN cooler fittings, and two 1/2" x 1/2" hose Remote Filter Mounts Standard Series
barb compression fittings. Standard-series filter mounts allow oil filter to
Engine Oil Cooler Kit - Includes complete cooler be remotely mounted anywhere with a three-bolt
assembly, universal thermostatic sandwich adapter and mounting plate, and is available in single or dual filter
adapter plate, 13/16"-16, 3/4"-16, 18mm, 20mm, & 22mm configurations. The mounts are
sleeve nuts, two aluminum -8AN fittings, four brass hose made from high-quality aluminum.
barb fittings, 180°F -8AN in-line thermostat, Filter Inlet/Outlet
Kit Part No.
10 feet of hose, four hose clamps, and hardware. Threads Ports
Single Mount—Ports Up
Cooler Cooler Trans. Engine Oil DER13005 3/4"-16 3/8"NPT
Assembly Inlet Cooler Kit Cooler Kit Width Height Depth
Part No. Size Part No. Part No. DER15708 3/4"-16 1/2"NPT
DER13760 -6 AN DER13960 — 13" 10" 5-5/8" DER15728 13/16"-16 1/2"NPT
DER15860 -8 AN DER15960 DER15660 13" 10" 5-5/8" Single Mount—Side Ports DER15709
DER15865 -10 AN ­— — 13" 10" 5-5/8" DER15709 3/4"-16 1/2"NPT

Hyper-Cool Premium Series Remote Filter Mounts

Dual Remote-Mount Coolers DER35709
This compact cooler set-up The premium-series filter mounts
utilizes a high-performance allow oil filters to be remotely
19-row stack platecooler with mounted anywhere with the new 180°
integrated turbulators, a clear double-mount design. A removable
anodized aluminum shroud, three-hole mounting bracket with
and two 5" waterproof/ a black powder coated finish is
dustproof electric fans. Ideal included.
for engine, transmission, or power steering needs. Every Filter Inlet/Outlet Ports
kit includes two male fittings, two barb fittings. Threads
Single Mount—Side Ports
Part No. Cooler Inlet Width Height Depth Barb Size
3/4" -16 -10AN / 7/8" -14 O-Ring
DER13740 -6AN 13" 7-3/8" 4-7/8" 3/8"
DER15840 -8AN 13" 7-7/16" 4-7/8" 1/2"
DER15845 -10AN 13" 7-9/16" 4-7/8" 1/2" Fuel Filter/Water Separator Kits
Eliminate contamination and water from fuel to improve
Dyno-Cool Remote Coolers engine performance and extend carburetor
Remote coolers can be installed and fuel injector life. Elements have a
virtually anywhere space allows to burst pressure of 100 PSI and a petcock
cool transmissions, power steering, allows water to be drained off without
or fuel. A reversible curved removing the filter. Mounts are
blade fan draws just 5.3 amps included and are available with
to move 350 CFM of air through vertical or horizontal 1/2"NPT
silver-brazed copper tubing with ports.
aluminum fins for maximum heat Part No. Description
dissipation. -6AN male inlets and outlets allow for easy DER13070 Single Mount, Side Ports
connection. Satin black powder-coated finish. DER13075 Replacement Filter

Part No. Description Dimensions

DER12730 6-Pass Remote Fluid Cooler 13-5/8" x 7-5/8" x 3-5/8"
DER12732 8-Pass Remote Fluid Cooler 13-5/8" x 10-1/4" x 3-5/8"

2023 - 2024 HOT ROD AND EARLY MUSCLE 147

Single Mount Universal Oil Filter Relocation Kit High-Output Fans
DER15780 Designed for maximum
Universal single- performance at high static
mount filter kit pressure loads for more effective
allows oil filter cooling in puller applications.
to be relocated Available in a variety of sizes
to a convenient, and blade configurations, all are
easy-access location. Includes a high-quality, die-cast equipped with IP68-certified
aluminum 1/2" NPT ports-up filter mount and a 1/2" NPT motors for long life, even under
ports-up spin-on adapter with most everything you dusty or wet conditions.
need for an easy installation. Filter mount uses Fram Part No. Description CFM Amp
Draw
PH8A oil filter or equivalent, using a 3/4"-16 filter thread. 5" High-Output Paddle
Designed to fit most passenger vehicles on the road DER16105
Blade Fan
315 3.6
today with 2-1/2" to 3-1/2" oil filter landings. Spin-on 8" High-Output Straight
DER16108 366 —
adapters provide external oil lines to allow the addition of Blade Fan
an engine oil cooler and/or remote filter mount, installing DER16918
12" High-Output Skewed
1350 12.0
at the stock engine oil filter location. This all-new version Blade Fan
has a billet-style look and has an ultra-bright polished
appearance.

Series 8000 Plate-and-Fin

Transmission Cooler
Engineered to extend
transmission life, coolers
feature high-flow, 3/4" embossed
turbolators to maximize cooling
efficiency. Coolers are constructed from furnace-brazed
aluminum and are equipped with 11/32" hose barb inlets.
Part No. Rows BTU Dimensions
DER33503 18 21,000 11" x 9-1/4" x 7/8"

Camaro/Firebird/ Subframe Connector Kit for 1979-93 Mustang

Nova DSE010114DS
Subframe DSE weld-in subframe
Connectors connectors use 2"
x 2" x 0.083" square
Weld-in style
tubing and .090" plate
subframe connectors
to increase chassis
increase stiffness by
stiffness with minimal
connecting the front
added weight. The
subframe to the rear
connectors reinforce the torque box and lower link
frame rails. Connectors are fabricated from 2" x 3" x .120"
without impacting ground clearance. Includes seat
wall rectangular steel tubing.
mounting brackets.
Part No. Description
DSE010101DS 1967-69 Camaro/Firebird
DSE010103DS 1970-81 Camaro/Firebird Quadralink Tow Hooks
DSE040305DS
Subframe Connectors The tow-hooks are a direct bolt-on
DSE010105DS for all DSE QUADRALink applications.
DSE weld-in subframe connectors The tow-hooks come with all hardware
increase chassis stiffness by needed for installation, they have a
connecting the front subframe black zinc electroplated finish for
to the rear frame rails. 19641/2- durability, and are 100% TIG-welded for
1970 Mustang. consistency and strength.

148 2023 - 2024 HOT ROD AND EARLY MUSCLE

1968-74 X-Body Front Anti-Roll Bar Mini Wheel Tub Kit for 1979-93 Mustang
DSE031401DS DSE040406DS
The DSE Mini Tubs
inner wheel housings
accommodate wider tire
and wheel packages (up
The larger-than-stock bar will improve cornering and to 315mm) on a 1979-93
reduce body roll. The bar is powder coated black and Mustang. Stamped from
comes complete including polyurethane bushings and 18-gauge steel for a stock
end links. appearance.

Deep Wheel Tub Kit with

Frame Rail Firewall Fill Plate
Sections DSE010901DS
Plate is an excellent
DSE040405DS way to smooth
The DSE Deep Tubs the passenger-
inner wheel housings side firewall when installing
accommodate an aftermarket air conditioning system.
wider tire and wheel 18-gauge steel unit welds-in, has rolled edge, and
packages (up to retains stock cowl to firewall seam. Includes instructions
335mm) on a 19641/2-1970 Mustang. and is stamped with pride in the USA. Fits 1967-69
Camaro/Firebird and 1968-74 Nova.

Deep Tubs
Deep tubs are inner wheel
housings designed to
accommodate wider tire Clutch Master Cylinder Bracket
and wheel packages. The Mounts the GM hydraulic clutch master
Camaro/Firebird tubs are for cylinder to the firewall of GM F-Body
tires as wide as 335mm and cars. Natural steel.
wheels up to 13" wide. Nova tubs
Part No. Description
are for up to 315mm tires and 11" wide
DSE070430DS Bracket for 1970-81 GM F-Body
wheels. Additional parts may be needed for installation.
Part No. Description
DSE040401DS 1967-69 Camaro/Firebird
DSE040402DS 1968-74 Nova
C6 Throttle Pedal Bracket
DSE040403DS 1970-81 Camaro DSE060111DS
DSE040404DS 1962-67 Chevy II A bolt-on bracket that mounts the 2005-12
C6 Corvette electronic pedal in a 1967-69
GM F-body. Black e-coat.
Mini-Tub Kit
DSE041207DS
Less invasive
than traditional
wheel tubs, DSE’s
Mini-Tubs retain a
somewhat stock
appearance in the
trunk area and
allow clearance
for modern low-
profile, wider tires
and wheels. Kit
includes tubs,
upper shock crossmembers and mounts, offset shackles,
leaf springs and adjustable pads, lower shock plates,
U-bolts, installation video CD and even a DSE T-shirt.
Fits 1968-74 Nova, 2" Drop.

2023 - 2024 HOT ROD AND EARLY MUSCLE 149

QUADRALink Rear Solid Body Mounts
Suspension Kit for 1967- The simple solution to eliminating
flex between body and chassis
69 GM F-Body subframe connections on 1967-81
Upgrade the stock rear leaf Camaros/ Firebirds and 1968-74
spring suspension on your Novas is DSE’s billet aluminum body
1967-69 Camaro/Firebird to mounts. Includes CNC-machined
DSE’s new “Swivel-Link” fully beveled stainless steel washers; 17-4 stainless bolts are
articulated four-link setup. an available option. Highly recommended for maximum
QUADRALink uses tuned, rigidity when installing subframe connectors. Kits include
high-durometer rubber 2 radiator core mounts and four body bolts with bevel
bushings instead of Heim joints or squeaky urethane washers.
bushings and the longer upper links provide great pinion Part No. Description
and U-joint angles. The Panhard bar is adjustable as ride DSE010301DS Solid Body Mounts
height changes for roll center control. The upper shock DSE010801DS Stainless Steel Bolt Kit
mount also strengthens the rear body and frame section.
Includes coil-over shocks and springs.
Part No. Description Windshield Washer Pump Kit
QUADRALink Rear Suspension Kit with Base
DSE041703DS
Shocks DSE121102
QUADRALink Rear Suspension Kit, 1967-69 GM Windshield washer pump kit is
DSE041703SDS
F-Body with Single Adjustable Shocks designed to work with DSE Selecta-
Speed Wiper Kits and includes 12V
Rear Upper Shock Mounts washer pump, hose, and fittings.
DSE040501DS
Fabricated upper shock mounts can
be used for tire clearance when a car Steering Shaft Kit for 1978-88
is being mini-tubbed. They will fit shocks with an eyelet- G-Body/1982-92 F-Body
style upper mounting end and will accept a 1/2" bolt. Sold
in pairs; bolts, and nuts are included.
DSE092519DS
Improve steering
feel and underhood
Offset Shackles clearances with this
DSE040901DS 3/4" double D steering
Designed for 1967-81 GM F-body shaft kit. It eliminates
(Firebird/Camaro) and 1968- the factory rag joint,
74 X-body, DSE’s offset billet using special a special vibration-reducing joint to improve
aluminum spring shackles responsiveness without added vibration. Natural steel.
relocate the springs inboard to
provide extra tire clearance. 24.5” Detroit Tuned
Power Rack and Pinion
1967-69 F-Body Hd Poly Rear Shackle Kit DSE090221DS
DSE041501DS Bring the feel
Upgrade your Camaro/Firebird of modern
rear leaf spring and shackle performance vehicles to street and track cars. "Detroit-
bushings with heavy-duty Tuned" power rack-and-pinion systems are valved for
polyurethane bushings. Kit increased effort and responsiveness. Built with all-new
includes spring eye and shackle components, every rack undergoes a strict quality check
bushings, zinc plated steel and performance test. Features include an internal inner
shackles, bolts, and lock nuts. tie rod boot balance tube and polyurethane mounting
bushings.
1967-81 Camaro Rear Leaf Springs
Engineered for popular GM F-body (Camaro/
Firebird) applications. The rear leaf springs
feature a 175 lb./in. spring rate and provide a
lowered stance to improve handling without
sacrificing ride quality. Sold per pair.
Part No. Description
DSE040101PDS 1970-81, 2" Drop
DSE040102PDS 1967-69, 3" Drop

150 2023 - 2024 HOT ROD AND EARLY MUSCLE

Power Steering Hose Kit RS Headlight Door Kit
DSE091302DS DSE070424DS
Pre-crimped stainless steel fittings connect
to -6AN fittings at the steering box. The
-6AN fittings for GM Type II pump (9/16"-18
to -6AN pressure and 5/8"-18 to -6AN return)
must be purchased separately. Kit includes
30" of hose that can be routed and cut to length at the
pump end. Fits DSE subframe for 1979-2004 Ford Fox
chassis.

"Hardline" Pressure Tube

with Banjo Bolt Connector
DSE091702DS
Designed to be neatly routed around power
steering pumps with integral reservoirs, the Eliminate the stock factory vacuum plumbing nightmare
kit has a banjo fitting to the pump, hard tubing for headlight doors on 1969 Camaro RS model and
for routing around the reservoir, and an attachment for improve headlight operation with an electric headlight
hose at the end of the tube. door kit from Detroit Speed and Engineering. The kit
includes everything required for a complete installation:
two electric actuators, a control module, harness,
brackets, and hardware. May be used to convert non-RS
Camaros to hideaway headlights.
9" Dual DIaphragm
Booster/
Master Cylinder Kit
DSE050105DS
Add late model brake
performance and pedal feel to 1967-69 Camaros.
Designed to work with any Baer brake kit, this bolt-on kit
includes 9" booster, master cylinder with reservoir, and
mounting bracket.

Electric Exhaust Stainless Steel

Cut-Out Kits Y-Pipe for 1982-
Uncork the exhaust 92 Camaro
system with the flip of a
switch. Hi-tech stainless DGHD901
steel cut-outs are built to Designed to help
last and feature Dayton balance exhaust
gear reduction motors, pressure for
rack-and-pinion drive maximum low-RPM
mechanisms, self-cleaning knife-edge seats for leak- power, Doug's Y-pipe
proof seal, and wiring harnesses for easy installation. Kits is made with 409 stainless steel and includes all needed
include two cut-outs and two harnesses. hardware for connecting to Doug's headers and the
factory or aftermarket catalytic converter. For 1982-92
Part No. Tube Diameter
DGHDEC250A 2-1/2"
Chevy Camaro equipped with a Small Block Chevy.
DGHDEC300A 3"
DGHDEC250A-1 2-1/2" Single
DGHDEC300ATD 3" SS Turn Down

2023 - 2024 HOT ROD AND EARLY MUSCLE 151

Headers
Every Doug’s header includes mounting hardware, collector reducers or connector pipes,
premium gaskets, and detailed installation instructions. The premium gaskets are extra thick
and rated up to 1,100°F, pressures to 3,700 PSI (255 bar), and have an exact port match with
Doug’s headers. All headers are metallic ceramic thermal barrier-coated unless otherwise noted.
Auto Std. Tube Collector Port
Part No. Models And Years Engines Footnotes AC P/B P/S Col Flr Col Flr Size (In.) Size (In.) Shape
Chevy
DGHD368 Camaro 1967-69 265-400 36, 52, 92, 93 N Y Y N Y N Y 1-3/4 3 Same as Port
DGHD308 Camaro 1967-81 265-400 36, 61, 92, 93, 96 Y Y Y N Y N Y 1-5/8 3 Oval
DGHD313 Camaro 1967-74 396-502 52, 69 Y Y Y N Y N N 1-3/4 3 Same as Port
DGHD320 Camaro 1967-69 396-502 69, 227 Y Y Y Y Y N Y 2 3-1/2 Same as Port
DGHD308 Chevelle/El Camino 1964-87 265-400 36, 92, 93, 96 Y Y Y N Y N Y 1-5/8 3 Oval
DGHD306 Chevelle/El Camino 1968-77 396-502 5, 52, 69 Y Y Y N Y N Y 1-3/4 3 Same as Port
DGHD316 Chevelle 1968-74 396-502 69 Y Y Y Y Y N Y 1-7/8 3-1/2 Same as Port
DGHD317 Chevy II 1962-67 265-400 17, 60, 96 Y Y Y Y Y N N 1-3/4 3 Same as Port
DGHD368 Chevy II, Nova 1968-74 265-400 36, 92, 93 N Y Y N Y N Y 1-3/4 3 Same as Port
DGHD308 Chevy II, Nova 1968-79 265-400 36, 92, 93, 96 Y Y Y Y Y N N 1-5/8 3 Oval
DGHD306 Chevy II, Nova 1968-79 396-502 5, 52, 69 Y Y N N Y N Y 1-3/4 3 Same as Port
DGHD308 Monte Carlo 1970-87 265-400 36, 92, 93, 96 Y Y Y Y Y N N 1-5/8 3 Oval
DGHD306 Monte Carlo 1970-77 396-502 5, 69, 93 Y Y Y N Y N Y 1-3/4 3 Same As Port
Passenger Car, Wagon
DGHD308 265-400 36, 92, 93, 96 Y Y Y N Y Y Y 1-5/8 3 Oval
1965-89
Passenger Car, Wagon
DGHD306 396-502 5, 52, 69 Y Y Y N Y N Y 1-3/4 3 Same as Port
1965-74
Dodge
DGHD452 Challenger 1970-74 426 WDG, 440 127, 215 Y Y Y N Y N Y 2 3-1/2 Same as Port
DGHD452 Charger 1966-72 426 WDG, 440 127, 215 Y Y Y Y Y Y Y 2 3-1/2 Same as Port
DGHD452 Coronet 1962-72 426 WDG, 440 127, 215 Y Y Y Y Y Y Y 2 3-1/2 Same as Port
DGHD452 Super Bee 1968-72 426 WDG, 440 127, 215 Y Y Y Y Y Y Y 2 3-1/2 Same as Port
Ford
DGHD625 Fairlane 1964-73 260-302
DGHD660YA Ranchero 1960-65 260-302 90, 100, 126, 216 Y Y Y 41 41 N N 1-5/8-2 2-1/2 Same As Port
Oldsmobile
DGHD741 Cutlass 1965-75 455 93 Y Y Y Y Y N Y 1-3/4 3 Same as Port
Plymouth
DGHD452 Barracuda 1970-74 426 WDG, 440 127, 215 Y Y Y N Y N Y 2 3-1/2 Same as Port
DGHD452 Belvedere 1962-72 426 WDG, 440 127, 215 Y Y Y Y Y Y Y 2 3-1/2 Same as Port
DGHD452 Fury 1962-72 426 WDG, 440 127, 215 Y Y Y Y Y Y Y 2 3-1/2 Same as Port
DGHD452 GTX 1966-72 426 WDG, 440 127, 215 Y Y Y Y Y Y Y 2 3-1/2 Same as Port
DGHD452 Roadrunner 1968-72 426 WDG, 440 127, 215 Y Y Y Y Y Y Y 2 3-1/2 Same as Port
Pontiac
DGHD581 Firebird, Trans Am 1970-81 326-455 93, 132, 191 Y Y Y N Y N Y 1-7/8 3-1/2 Round
GTO/Lemans/Tempest
DGHD564 326-455 93, 104, 134, 136, 191 Y Y Y N Y N Y 1-3/4 3 D-Port
1964-67
GTO/Lemans/Tempest
DGHD567 326-455 93, 104, 132, 134, 136, 190, 191 Y Y Y N Y N Y 1-7/8 3-1/2 Round
1964-72
DGHD569 GTO/Ventura 1974 326-455 93 Y Y Y N Y N Y 1-3/4 3 D-Port
DGHD590 GTO 1968-72 326-455 93, 104 Y Y Y N Y N Y 1-3/4 3 D-Port
Note: Listed headers are legal only for off-highway use, racing use, or for use on pre-emission-controlled motor vehicles.

Footnotes:
R Raw Steel Some factory heads do not have end bolt holes and should be
104
B Hi-Temp Black drilled and tapped to ensure sealing.
5 Shorty design for maximum ground clearance. 126 Y indicates Tri-Y design.
36 Fits D-port cylinder heads including ZZ4 crate engines. 127 Fits with Mopar mini-starter part numberP5249644.
52 Will not fit Saginaw close ratio with 825 power steering box. 132 Fits Edelbrock Performer, Ram-Air, Super Duty and H.O. heads Only.
60 Will not fit 168-tooth flywheels or kickout aftermarket starters. 133 Does not fit with Powerglide transmission.
61 Does not fit 67-69 Camaro with A/C. Application with scatter shield or factory bell housings with dual starter
136
Big block frame stands and motor mounts must be used to ensure pockets must use Fram oil filter part no. PH3675 or equivalent.
69
proper engine location and header fit. Turbo 400 equipped applications must use shorter aftermarket
190
90 Will not fit with C-6 transmission. modulator valve (2-3/4" long).
92 Will fit most angle plug heads including factory Chevrolet “Bow Tie”. 191 Header fits with Milodon oil pans MIL30355, MIL31660.
Requires removal or modification of locking steering columns, Designed for original heads. 1975 and later models may
93 215
if equipped. require modification to flange.
Installation requires left Side A/C bracket part number H7608. 216 Will not fit new cast iron Ford Dart engine blocks.
96 1979 and later vehicles with short compressors
can use the stock bracket.
100 Will not fit models with air injection hoods.

152 2023 - 2024 HOT ROD AND EARLY MUSCLE

Aluminum Radiator for 1967-69 Mustang Ford Mustang Upper
DRA340-2AL Control Arm Assembly
This two-row down-flow direct- Reproduction upper control
fit radiator features 1-inch tubes arm assembly with greaseable
offering 4-row efficiency and a 5–7 control arm shaft, and
pound weight savings. Includes greaseable riveted ball joint.
automatic transmission cooler, Part No. Description
and measures 20-1/4"W x 16-3/8"H DRAC4DZ-3082-RI 19641/2-66, Black/Gray
x 2-5/8"D, and features passenger DRAC7DZ-3082-RI 1967-73, Black
side inlet and outlet. Natural finish.
19641/2-73 Ford Mustang High-
7" Round Headlight for 19641/2-73 Mustang Performance Coil Spring Perch
DRAC0DZ-13007-A DRAC4DZ-3388-HP
Officially licensed by Ford, these Upgraded spring perch featuring
7-inch round halogen sealed beam greaseable synthetic elastomer
headlamps feature authentic Ford bushings and rotating spring perch.
markings and upgraded halogen
performance. This is a reproduction
of a very desirable and rare 19641/2-68 Ford Mustang
version headlamp used on classic
Mustangs. 50/55-watt dual-filament bulb. Sold each. Aluminum Heater Core
Direct-fit heater cores are
designed for applications
Removable Timing Pointer for 19641/2-73 without factory air
Mustang conditioning. Flat tank design
DRAC2OZ-6023-B features brazed aluminum
Black zinc-plated steel with construction for excellent
stainless steel hardware. Fits 289, thermal efficiency and durability.
302, and 351W engine. Part No. Description Applications
DRAC5DZ-18476-AL Driver Side Inlet/Outlet 19641/2-68 w/o A/C
Passenger Side Inlet/Outlet,
Power Steering Ram DRAC5DZ-18476-ET
Extended Ports
19641/2-68 w/o A/C

Cylinder for 1967-70 Mustang

DRAC3DZ-3A540-A
A concours quality
reproduction of
the original power
steering cylinder. Styled Steel Wheels
Black painted steel Styled wheels recreate the
unit includes protective bellows. look of the original steel
wheels offered on Mustangs. 5
x 4.5" bolt pattern. Sold each.
Part No. Description
Ford Mustang Side-View DRAC5ZZ-1007-BR
14" x 7", 4.000" Backspace,
Charcoal/Chrome
Mirrors 15" x 7", 4.625" Backspace,
DRAC5ZZ-1007-CR
Factory reproduction chrome Black/Chrome
side-view mirror. Includes mounting
hardware.
Part No. Description
DRAC3RZ-17696-A 19641/2-67, Round
DRAC7AZ-17696-A 1967-73, Square 19641/2-70 Ford Mustang
Monotube Shocks
Ford Mustang Lower Control Arm Assembly Monotube gas shocks are a direct replacement
The direct-fit factory for factory units. Red painted steel. Sold each.
replacement lower control arm
Part No. Description
features the original riveted DRAC5ZZ-18124-HP Front
design. Complete with ball DRAC5ZZ-18125-HP Rear
joint, bushing, grease seal,
grease fitting, washer, nut and
cotter key. Black and gray. Sold each.
Part No. Description
DRAC4DZ-3078-A 1964-66 Lower Control Arm
DRAC8OZ-3078-B 1968-69 Lower Control Arm

2023 - 2024 HOT ROD AND EARLY MUSCLE 153

19641/2-66 Ford Mustang Spindles Small Block Ford Aluminum Valve Covers
Carefully 3D scanned and
modeled from original
DRAC5ZZ-6A582-A-B
spindles that were obsoleted Cast aluminum valve
by Ford years ago. Forged covers match stock
from ASTM 5140 grade steel height with improved
with a corrosion-resistant baffling, and allow
black e-coating and precision use of most roller
machined mounting surfaces, rockers. Spark plug
they feature a heat-treated, wire brackets and PCV
induction-hardened straight grommet included.
steel snout. For use with drum Black powder-coated
or disc brakes. Available for crinkle-finish with
right and left sides. Sold each. "Mustang Powered by
Ford" text. For 19641/2-
Part No. Description 72 Mustang. Sold as pair.
DRAC5ZZ-3105-R Right-Hand Spindle
DRAC5ZZ-3106-L Left-Hand Spindle
Big Block Ford Aluminum Valve Covers
19641/2-70 Ford Mustang Adjustable Strut Rod DRAC6OZ-6A582-C
DRAC5ZZ-3468-P Cast aluminum valve
Adjustable rods provide covers match stock
a performance upgrade height with low-profile
over stock units and fit on baffling for improved
either side. Black and silver clearance to allow use
powder-coated finish. with most roller rockers.
Hardware included. Sold Chrome plated with
each. "Mustang Powered by
Ford" text. For 1967-73
Mustang with 390/428.
19641/2-73 Ford Mustang Leaf Springs Sold as pair.

High-quality spring steel units feature O.E.M. style 19641/2-73 Ford

clamps, correct "hot cupped" ends, anti-squeak pads, Mustang Exhaust
and come with front eye bushing installed. Available in Manifolds
standard and heavy-duty. Sold each. Small Block Ford cast
Part No. Description iron exhaust manifolds
DRAC5ZZ-5560 4-Leaf Spring Assembly feature raised part
DRAC5ZZ-5560-HD Heavy-Duty 5-Leaf Spring Assembly numbers and FoMoCo
logo. Hardware
1967-68 Ford Mustang included. Sold in pairs.
Cowl Assembly Part No. Description
DRAC5ZZ-9430-1-B Original OEM-Style Reproduction
DRAC5ZZ-6502010-28 DRAC5ZZ-9430-1-DE OEM-Style
A precise EDP-coated steel reproduction of the original,
with the upper and lower sections spot welded together. 19641/2-68 Ford Mustang
Late 1965 and all 1966 cars will require use of early wiper
transition arms and use early style wiper bezels or modify Tri-Y Stainless Steel Headers
cowl grille assembly. Sold each. DRAC5ZZ-9430-SS
Made from 304 stainless
steel, these Small
1965-66 Ford Mustang Block Ford headers
feature mandrel-bent
Rubber Floor Mat Set 16-gauge pipes, 5/16"
DRAC5ZZ-6513086-BK thick flanges, metal
4-piece set is a direct-fit composite gaskets,
replacement and includes front 1-1/2" diameter primary
and rear mats featuring the tubes, 1-3/4" secondary
classic Running Horse logo, and tubes, and 2-1/2" to 2"
equipped with rubber spikes collector/reducers.
on the back to keep them from Hardware included.
sliding. Black.

154 2023 - 2024 HOT ROD AND EARLY MUSCLE

19641/2-67 Ford Mustang V8 1969-70 Ford Mustang Rear Spoiler
Power Steering Conversion Kit DRAC9ZZ-6344210-KR
DRAC5ZZ-MS-PS-CK
Everything needed
to convert a V8-
powered Mustang
from manual steering
to power steering. Factory-correct thermoplastic polymer constructed
Bolts to factory spoiler. Includes spoiler, pedestals, pads, and mounting
location. 16:1 ratio. hardware. Concours correct reproduction spoiler for
Kit includes steering Boss 302 and Mach 1 Mustangs.
gear, steering
pump, hoses, and all Deluxe 19641/2-93
necessary hardware. Mustang Car Cover
DRACC-2
Ford Mustang Turn Signal Switch Breathable, water-
Factory reproduction for fixed resistant cover features 3
column applications is a direct- layers, including a center
fit replacement, with factory layer of Aptra, to allow
correct terminals and color- excellent protection from
coded wiring. the elements. Gray.
Part No. Description
DRAC7ZZ-13341-F 1967, No-Tilt
DRAC9AZ-13341-B 1969, No-Tilt
Carroll Shelby
CS14 Wheels
Compatible with most late
model, big brake systems,
these stylish pinched split
1967-73 Ford Mustang Front 5-spoke wheels have a 4.5"
Lowering Springs bolt pattern. Cast aluminum
with an anodized gloss black
DRAC7ZZ-5310-P or hyper silver finish, and
Lowers front stance 1-inch. 600-lb./in. featuring the Caroll Shelby
rating. Black. Sold in pairs. logo. Center cap included.
Part No. Size Backspacing Color
DRACS14-215455-B 20" x 11" 7.970" Gloss Black
DRACS14-215455-CP 20" x 11" 7.970" Hyper Silver
DRACS14-295430-B 20" x 9.5" 6.820" Gloss Black
1967 Ford Mustang Horse & Corral Grill Emblem DRACS14-295430-CP 20" x 9.5" 6.820" Hyper Silver

DRAC7ZZ-8213-A Carroll Shelby

Direct-fit replacement
emblem features a
CS5 Wheels
chrome-plated, show- These lightweight (23.5
quality finish. Includes lbs front and 24.5 lbs rear)
mounting hardware. flow-formed wheels feature
sharp, elegant lines, and are
suitable for 2005 and later
Mustangs using a 4.5" bolt
1969-70 Ford Mustang Rear pattern. Forged aluminum
Window Louver Kit wheels are anodized in
DRAC9ZZ-6344268-K gloss black or hyper silver
finish, and accented with
Complete kit includes louvers, hinges,
the Caroll Shelby logo.
latches, gaskets and pads.
Part No. Size Backspacing Color
DRACS5-911550-B 19" x 11" 7.930" Gloss Black
DRACS5-911550-CP 19" x 11" 7.930" Hyper Silver
DRACS5-995534-B 19" x 9.5" 6.820" Gloss Black
DRACS5-995534-CP 19" x 9.5" 6.820" Hyper Silver

2023 - 2024 HOT ROD AND EARLY MUSCLE 155

19641/2-73 Ford Mustang Seat Belts
Magnum 500 Wheels Direct-fit replacement
units with black nylon
DRAD1ZZ-1007-AR webbing.
These reproduction Magnum Part No. Description
500 wheels create the factory 1968-73, 3-Point Retractable,
look of an original steel wheel DRASB-3P-BK-PBSB
Vintage Push Button, Pair
without the OE price. Chrome- DRASB-BK-H
19641/2-73, Lap Belt,
plated finish with satin black Mustang Emblem, Pair
inserts. Center cap sold DRASB-BK-PBSB 19641/2-73, Lap Belt, Push Button, Each
separately.
1965-68 Ford Mustang Vinyl Trunk Mat
19641/2-66 Ford Mustang DRATM-FM-CPCV-65P
This direct-fit replacement
Power Brake Conversion Kit trunk mat is precision cut
DRAPBC-M1 for an exact fit. OEM-style
This new master cylinder material.
with power booster is
easy to install and will
add safety and improved
stopping power.

GP-1 Assembly Gel GP-1 Synthetic Blend

JGP00778 High-Performance Oil
Specialized, no-drip formula stays Engineered for competition or street
exactly where it is applied, delivering performance applications, GP-1 is
critical protection to wrist pins, blended with genuine Pennsylvania
camshafts, valvetrain components Grade base oil, which allows it to achieve
and bearings. Formulated from a higher Pressure-Viscosity Coefficient
Pennsylvania petroleum product, for superior film thickness, while
lubricant safely mixes with break-in oil also incorporating Driven's high-zinc
for added wear protection during initial (ZDDP) additive technology. Available in
start-up. Sold in 1-oz. packet. viscosities of 5W-20, 10W-30, 15W-40,
and 15W-50. One-quart bottle.
Part No. Description
JGP19206 5W-20
JGP19306 10W-30
JGP19406 15W-40
JGP19506 15W-50

GP-1 Single-Weight
Conventional Oils
High-performance motor oils
combine Pennsylvania Grade base
oil with Driven's high-zinc (ZDDP),
low-detergent package for superior
protection. One-gallon jugs.
Part No. Description
JGP19416 40W - Formulated for Military, ORV, and Antique Vehicles
50W - Formulated for Supercharged and Methanol
JGP19516
Fueled Engines

156 2023 - 2024 HOT ROD AND EARLY MUSCLE

GP-1 30 Grade Break-In Oil AT3 Synthetic ATF
JGP19336 JGP04706
Specialty motor oil combines Pennsylvania Full synthetic ATF designed for use
Grade base oil with Driven's high-zinc where Dexron III®, Dexron II®, Mercon®,
(ZDDP), low-detergent package for and Mercon V® fluids are specified.
superior break-in protection. Formula This ATF can also be used in manual
helps protect flat tappet, overhead, and transmissions like the T-5, T-45, and T-56,
roller cam engines during the break-in and transaxles that specify Dexron III or
process, while additionally aiding piston multi-vehicle ATF. One-quart bottle.
ring seating. Viscosity typical of SAE 30W.
One-quart bottle. Hot Rod Oil
Joe Gibbs Driven Hot Rod Oil begins
as their race formulation with critical
LS30 Synthetic additives that protect engines even
Street Performance Motor Oil when they’re not running. Higher
levels of zinc deliver proper anti-wear
JGP02906 protection for pushrod and flat tappet
A new synthetic 5W-30 street engines, superior camshaft wear
performance motor oil designed for protection and the best characteristics
GM LS based engines. Features a high of mineral oil without unwanted
zinc content to protect aggressive cam “saturates” that can lead to sludge and
profiles, and the advanced synthetic varnish. Offered in conventional or
formula delivers high-temperature synthetic formulas. Not for use with
protection. Combined, LS30 provides catalytic converters. Not API certified.
protection for street/strip applications Sold in one-quart bottles.
that call for a 5W-30 viscosity oil. Not API
Description 1-Qt. Bottle Part No.
certified. Catalytic converter compatible. Synthetic
Sold in one- quart bottles. 10W-30 JGP01506
10W-40 JGP03906
15W-50 JGP01606
FR20 Synthetic Performance Conventional
10W-30 JGP02006
Motor Oil 10W-40 JGP03806
JGP03006
A new synthetic 5W-20 performance BR Break-In Oil
motor oil designed for Ford modular JGP00106
engines. FR20 features a high zinc content Petroleum oil provides the right levels
to protect aggressive cam profiles, and the of zinc and phosphorus for flat-
advanced synthetic formula delivers high- tappet engines. The additive package
temperature protection from viscosity promotes ring seal and provides
breakdown. Not API certified. Catalytic maximum protection available for cams
converter compatible. Sold in one-quart and lifters during initial break-in. SAE
bottles. 15W-50 viscosity. Not API certified.
Sold in one-quart bottles.

FR50 BR40 Break-In Oil

JGP04106 JGP03706
FR50 provides the required viscosity for The same high zinc and phosphorus
Ford Coyote oiling and variable timing formula as the original break-in oil, now
systems, delivering the wear protection in SAE10W40 viscosity. Well suited for
needed for performance camshafts. classic muscle car, European sports car,
Low-volatility formula guards against oil and motorcycle engines with flat tappet
vaporization and foaming and prevents and aggressive roller valve trains. Does
inconsistent cam phaser system not require additional ZDDP additives.
performance, especially in supercharged Viscosity typical 10W40. Sold in one-
Ford Coyote engines. Viscosity typical of quart bottles.
5W-50. Sold in one-quart bottles.

2023 - 2024 HOT ROD AND EARLY MUSCLE 157

BR30 Break-In Oil GL-4 Gear Oil 80W-90
JGP01806 JGP04530
Sharing the same formula as Joe Gibbs Conventional GL-4 80W-90 Gear Oil delivers
original break-in oil, BR30 has a 5W30 proven oil technology to provide application-
viscosity for tight clearances and/or low- specific performance for gear boxes,
temperature break-in. Equally effective transaxles, and transmissions that call for
in restrictor plate engines, drag race GL-4 gear oil. Utilizing high-quality base oils,
engines, and OEM rebuilds. Ring seal is it protects yellow metals and provides proper
excellent. Not API certified. Sold in one- synchronization to prevent gear clashing in
quart bottles. synchronized manual transmissions. Sold in
one-quart bottles.

Speed Clean
STF-Synthetic TransFluid
JGP50010
JGP04006 You can use this special formula to clean a car's
STF (Synthetic Transmission Fluid) engine and every cleaning/degreasing need in
protects bearings, gears, clutches, the shop. Sold in 18-ounce can.
valve, and solenoids by reducing friction,
heat, and wear. Improves shifting
characteristics and lowers operating
temperatures. Recommended for manual Brake and Parts Cleaner
transaxles and transmissions that require JGP50020
automatic transmission fluids, multi- Joe Gibbs Driven brake and parts
viscosity or straight grade motor oils. cleaner cleans and dries quickly,
Sold in one-quart bottles. leaving no residue. Sold in 18-
ounce can.

Speed Lube
Power Steering Fluid JGP50090
Speed Lube is an aerosol lubricant
JGP01306 utilizing specialized oils as a carrier to deliver
A fully synthetic formula power steering extreme pressure additives to the surface that
fluid. Provides improved thermal stability are optimized for high-speed metal-to-metal
for less pressure drop. Offers high- contact. Much of this chemistry comes from
temperature foaming resistance for better cutting fluid technology. Can also be used as a
cooling. Sold in one-quart bottles. rust protectant for unpainted frames. Sold in
8-ounce can.

75W-110 Synthetic Gear Oil

JGP00630 HVL (High Viscosity Lubricant)
Reduces operating temperatures by JGP50050
up to 15 degrees compared to other HVL is an ideal assembly lubricant, and
brand gear oils. Sold in one-quart HVL can be added to regular motor oil
bottles. to increase film thickness. Provides
a tenacious yet fluid lubricating film
to protect reciprocating and rotating
components during assembly and initial
break-in. This non-foaming product mixes
Limited Slip Gear Oil with oil and extends film thickness during
the critical break-in process. Apply to
JGP04230 engine bearings, piston skirts, bushings,
Synthetic 75W-90 limited slip gear oil reduces gear drives, etc. Does not harden or cause
drag, resists foaming and maintains viscosity parts to become “sticky”. HVL can also be
under extreme heat and high loads. Exceeds used as a chain lubricant to reduce friction
the performance requirements of API GL-5. but provide grease-like durability. Sold in
Recommended for limited slip differentials. 8-ounce bottles.
Sold in one-quart bottles.

158 2023 - 2024 HOT ROD AND EARLY MUSCLE

Race Wax Assembly Grease
JGP50060 Completely dissolves in oil. Used to pre-
Race Wax leaves a smooth, glossy finish lube cams and lifters. Combined with
that helps shed tire rubber and dirt. Sold in BR, it provides proven protection during
24-ounce bottle. break-in. Available in one-pound tub or
one-ounce tube.
Part No. Description
JGP00728 1-lb. Tub
JGP00732 1-oz. Tube

Carb Defender Fuel Additive Cooling System Protector

Specially formulated additive protects the JGP50030
entire fuel system against harmful ethanol Impurities in well water can cause rust
corrosion, preventing costly repairs and loss and corrosion inside the radiator, block,
of performance. Carb Defender cleans and water pump, and cylinder heads, leading
protects the entire fuel system and intake to a loss of cooling system efficiency. Joe
tract. Ideal for classic vehicles that see Gibbs Driven Cooling System Protector
extended periods of storage. Eight ounces stops the adverse effects of hard water
treats up to 25 gallons of ethanol-based gas. better than the leading brand of coolant
1-ounce packet treats five gallons. additives. Sold in 12-ounce bottle.
8-oz. Bottle Part No. 1-oz. Packet Part No.
JGP70040 JGP70042
Extreme Pressure Grease
JGP70030
A premium extreme pressure
grease with excellent load
carrying ability. Designed for
Injector Defender high temperatures and high
loads. Provides exceptional mechanical stability in a NLGI
Gasoline Fuel Additive #2 grease. Available in 400g cartridge.
JGP70048
This gasoline fuel additive is formulated Storage Defender Gasoline
to protect the entire fuel system from
corrosion caused by ethanol-blended Fuel Additive
fuels and clean any deposits that have JGP70060
accumulated. Designed to work in all Storage Defender gasoline fuel additive
fuel-injected engines. In addition to is to be used when vehicles are stored to
the fuel system protection offered, this prevent the damaging effects of ethanol.
additive also provides fuel stabilization and The special corrosion inhibitors work
preservation. 10-ounce bottle treats up to to counteract the damaging moisture
25 gallons. buildup resulting for the hygroscopic
characteristics of ethanol-blended
fuels. The alcohol-free additive will also
preserve fuel life for up to one year.
The six-ounce bottle will treat up to 25
gallons of fuel.
Defender + Booster Fuel Additive
JGP70056 Storage Defender Oil Additive
The combination of octane booster and fuel JGP70052
system conditioner in one bottle makes this Storage Defender Oil additive is meant to mixed with the
fuel additive from Driven Racing Oils an all-in- vehicle’s oil before it is stored during the
one product. By keeping the fuel system and off-season to prevent corrosion and rust.
combustion chambers free from corrosive Can be used with any oil to prevent rust
deposits and increasing the fuel octane, and corrosion associated with long term
power is restored along with the elimination storage. Great for classic cars and race
of engine detonation, and fuel economy is cars using optimized race oils that have
increased. 10-ounce bottle treats up to 25 minimal anti-corrosion properties. The
gallons. six-ounce bottle will treat up to 10 quarts
of oil.

2023 - 2024 HOT ROD AND EARLY MUSCLE 159

Premium Acrylic Enamel Premium Self-Etching Primer
Acrylic enamels with high-solids formula SHEDAP1690
deliver maximum coverage with ultimate Etches and primes in one easy step. Can
protection as well as gloss and color be used under all of today’s automotive
retention. 12-ounce spray cans. finishes. Perfect for spot repairs. Creates
Part No. Color superior adhesion on most plastics,
SHEDA1600 Black fiberglass, bare steel, aluminum, and
SHEDA1603 Semi Gloss Black
stainless steel. 12-ounce can.
SHEDA1605 Flat Black
SHEDA1610 Medium Grey
SHEDA1630 Leaf Green
SHEDA1640 Cherry Red
SHEDA1663 School Bus Yellow
SHEDA1670 Gloss White SHEDA1640 Premium Primer Sealer
SHEDA1684 Chrome Aluminum
SHEDA1692 Clear SHEDAP1699
Gives maximum corrosion resistance and
bonding of base colors. Provides a smooth,
Premium Lacquer uniform surface for final coating. Ideal for
Fast-drying, premium-quality formula for metal, wood, and fiberglass. 12-ounce can.
quick coverage, weather resistance, and
adhesion the first time. 12-ounce can.
Part No. Color
SHEDAL1607 Flat Black
SHEDAL1608 Semi Gloss Black Rust Fix
SHEDAL1677 Gloss Black
SHEDAL1679 Silver Metallic
SHERF129
SHEDAL1695 Clear Destroys rust on contact.
Sprays on clear and turns to a
black metal protective coating
to fight future rust from
SHEDAL1607 forming. 10.25-ounce can.
Premium Sandable
Filler Primer
Fast-drying, sandable formula provides
a smooth, rust-resistant base coat that
improves adhesion and appearance of the
top-coat. Features high-build and fast-
filling characteristics. Easy to featheredge.
Ideal for metal, wood, and fiberglass
surfaces. 11-ounce can.
Part No. Color Engine Enamel with Ceramic
SHEFP101 Grey Filler Primer A durable formula that resists intermittent
SHEFP102 Red Oxide Filler Primer temperatures up to 500°F. The durable
ceramic resins give maximum heat
dissipation and a high-gloss finish that
resists oil and gas and will not blister, flake,
crack, or peel. 12-ounce cans.
Premium Sandable Part No. Color Part No.
SHEDE1642
Color
SHEFP101
Primer Surfacer SHEDE1601 Ford Blue SHEDE1632 Chrysler Industrial Red
SHEDE1605 Ford Red SHEDE1634 GM Low Gloss Black
All-purpose, fast-drying primer helps achieve
SHEDE1606 Ford Dark Blue SHEDE1635 Ford Semi Gloss Black
top-coat uniformity. Great for smooth fill-in SHEDE1607 Chevy Orange-Red SHEDE1636 Clear
of surface cracks and imperfections. For SHEDE1609 Chevy Blue SHEDE1638 Cummins Beige
use on prepainted or unpainted surfaces. SHEDE1611 New Ford Grey SHEDE1640 Plum Purple
12-ounce. can. SHEDE1613 Gloss Black SHEDE1641 Grabber Green
Part No. Color SHEDE1615 Aluminum SHEDE1642 Daytona Yellow
SHEDAP1689 White Primer SHEDE1616 Pontiac Blue Metallic SHEDE1643 Torque-N-Teal
SHEDAP1692 Gray Hot Rod Primer SHEDE1618 Detroit Diesel Green SHEDE1644 Hunter Green
SHEDAP1694 Red Oxide Primer SHEDE1620 Chevy Orange SHEDE1650 Cast Coat Aluminum
SHEDAP1698 Black Hot Rod Primer SHEDE1621 Old Ford Blue SHEDE1651 Cast Coat Red
SHEDE1622 Chrysler Orange SHEDE1652 Chrysler Hemi Orange
SHEDE1631 Chrysler Blue SHEDE1653 Red

SHEDAP1692

160 2023 - 2024 HOT ROD AND EARLY MUSCLE

Wheel Coating High-Performance Caliper Paint
Customize or restore wheel surfaces Want to dress up calipers? Add color using
quickly and effectively. Specialized coating Dupli-Color’s aerosol Caliper paint to spray a
offers a highly reflective finish to steel, nice, even protective coating. Resistant to heat,
aluminum, and plastic wheels and wheel chipping, chemicals, and brake dust. 12-ounce
covers. Resists cracking, flaking and aerosol.
peeling, while protecting against heat, Part No. Color
brake dust, and the elements. Sold in SHEBCP100 Red
11-ounce aerosol cans. SHEBCP102 Racing Black Satin
Part No. Color SHEBCP104 Blue
SHEHWP100 White SHEBCP200 Caliper Cleaner
SHEHWP101 Silver
SHEHWP102 Graphite Shadow Chrome-Blackout Coating
SHEHWP103 Clear
SHEHWP104 Black SHESHD1000
SHEHWP105 Bronze Use this two-can system to
create a black chrome effect on
High-Performance polished metal or chrome-plated
surfaces. First, a translucent
Caliper Paint Kit black coating is applied, creating
SHEBCP400 a dark shadow effect. Next, a
Caliper Paint Kit goes clear coat adds gloss, depth and
on with a brush. There’s protection from the elements.
no need to remove the The Shadow coating is resistant
calipers. Clean the to brake dust, road abrasion,
calipers, mask with chipping, and fading. The kit
tape, and brush on color. includes two 11-ounce spray cans.
Everything is included;
cleaner, stir stick, brush, Rust Barrier
tape, and instruction
book. Ceramic resins offer SHERBG100
maximum heat dissipation. 32-ounce kit. Apply directly over rusted or bare metal
surfaces to seal away corrosion and
provide a black abrasive- and impact-
Premium Acrylic Enamel Primer + resistant, flexible rubberized finish.
Paint Semi-Gloss Black One-gallon bucket.
SHEPAE101
Prime and paint surfaces in a single step.
This advanced high-solids formula bonds to a
variety of surfaces while delivering excellent
durability for the most demanding projects.
Excellent adhesion on all metals, plastic, Industrial Strength Paint Stripper
wood, fiberglass, masonry, and SHEST300
concrete. 12-ounce spray can.
Powerful solvent quickly removes paint,
varnish, shellac, and lacquer from metal,
Krylon Fusion All-in-One glass, wood, and other hard surfaces. Not
Satin Black for use on plastics or fiberglass. 11-ounce
spray can.
SHE2732
Krylon Fusion bonds to plastics
with 5x stronger adhesion than
conventional spray paints, without
sanding or priming. 12-ounce
spray can. Premium Spray-On Undercoating
SHEUC104
Multipurpose Foaming Prep Spray Reduce road noise and protect against
corrosion with this paintable black
SHEPS200 rubberized undercoating. Great for wheel
Specifically formulated to remove oil, wax, wells, gas tanks, frames and supports, weld
grease, and other contaminants from metal joints, floor pans, doors and quarter panels.
surfaces, Dupli-Color Prep Spray helps High-output 15-ounce spray can.
maximize the gloss and finish for best
performance when used prior to painting.
Works great on OEM finishes, fiberglass, bare
metal, automotive plastics, and aluminum.
11-ounce spray can.

2023 - 2024 HOT ROD AND EARLY MUSCLE 161

A revolutionary line of sound-absorbent and heat-resistant elastomeric materials beneficial in the construction of any hot
rod project.

Dynaliner Hoodliner
DMT11905
Self-adhesive 3/4" thick
sound soaker with an
oil- and water-resistant,
aluminized skin. With high-
An efficient self-adhesive thermo-acoustic foam in 1/8", tack, pressure-sensitive
1/4", and 1/2" thicknesses to absorb sound and insulate adhesive, the Hoodliner is
roof, firewall, floor, quarter panels, and doors from heat. easily applied. 32" x 54" in
Part No. Description size.
DMT11101 Dynaliner 1/8", 1 Sheet, 32" x 54" (12 sq. ft.)
DMT11102 Dynaliner 1/4", 1 Sheet, 32" x 54" (12 sq. ft.)
DMT11103 Dynaliner 1/2", 1 Sheet, 32" x 54" (12 sq. ft.) DynaTape
DMT13100
Xtreme Dynamat DynaTape is a 1-1/2" wide and 2-mil
A patented, elastomeric sound thick finishing tape for seams
deadener with a .060" thick between sheets of Dynamat. It
layer of butyl and a .004" thick prevents butyl migration and adds a
aluminum skin. Very high sound professionally finished appearance.
deadening properties. Self- Tape has a pressure-sensitive acrylic
adhesive. adhesive. Roll is 30 ft. long.
Part No. Description
DMT10415 Xtreme 2-Sheet Pak, 10" x 10" DynaPlate Solid Aluminum
DMT10425 Xtreme 1-Sheet Pak, 1 Sheet 18" x 32", (4 sq. ft.)
DMT10435 Extreme Door Kit, Four 12" x 36" Sheets, (12 sq. ft.) Sound Deadener
DMT10455 Xtreme Bulk Pak, 9 Sheets, 18" x 32", (36 sq. ft.) DMT13105
DMT10465 Extreme Mega Pak, Nine 24" x 48" Sheets, (72 sq. ft.)
DynaPlate is a solid aluminum
DMT19405 Extreme Trunk Kit, Five 18" x 32" Sheets, (36 sq. ft.)
sound deadener that is .014" thick
and weighs less than 0.2 lbs. per
square foot. The self-adhesive
Tools sheets are 24" x 30" (5 sq. ft.) and
Part No. Description packed three to a package.
DMT10005 Dyna-Roller, Economy Hardwood Roller
DMT10007 Dyna-Roller, Professional Rubber Roller
DynaDeck Heavy-Duty Vinyl Flooring
Weatherproof and waterproof
SupEARite carpet replacement has an
Get a quiet, solid ride without embossed vinyl grain to match
adding excessive weight the textured flooring of vintage
with SupEARite, a flexible, cars, Jeeps, and trucks. Will
low-density space-age plastic not absorb water and can be
bonded to an alloy skin. It actually used in street rods, trucks,
converts noise-causing vibrations into and vintage sports cars where
silent energy. Use it on doors, hoods, floors, roofs, and in durable, waterproof floor material is needed. Material is
the trunk. 18" x 32" sheets are available in packs of 3 and 54" wide and available in 3', 6', 9', 12', and 25' lengths.
12.
Part No. Description
Part No. Description DMT21203 36" x 54" (13.5 sq. ft.)
DMT10612 SupEARite, 3-Sheet Pack DMT21206 72" x 54" (27 sq. ft.)
DMT10648 SupEARite, 12-Sheet Pack DMT21209 108" x 54" (40.5 sq. ft.)

DynaPad
DMT21100
A non-adhesive, four-layer
composite with a 1 lb./sq.
ft. vinyl barrier between
two layers of 3/16" thick
acoustic foam with a
urethane facing. Excellent
for low-frequency sound
control and thermal
insulation. 32" x 54" in size.

162 2023 - 2024 HOT ROD AND EARLY MUSCLE

Ultra Flo Stainless Steel Muffler
Take a proven straight-through design for maximum flow and power, add continuous
roving fiberglass technology (CRF) for a deep powerful tone, and house it all in a 100%
stainless steel case for lifelong durability and the result is the Ultra Flo SS Muffler.
Polished to a mirror-like finish, the Ultra Flo looks great and can bring any stock pickup
or sport utility to life.

2-1/2" 3" 2-1/2"

I.D. DYN17219 DYN17221 I.D. DYN17222
2-1/2" I.D. 3"
4-1/2" x 9-3/4" Oval 4-1/2" x 9-3/4" Oval 4-1/2" x 9-3/4" Oval
I.D. I.D. 2-1/2"
I.D.
14" 14" 14"
19" 19" 19"

3"
DYN17223 DYN17224 DYN17225 DYN17229
3" 3" 3-1/2" 3-1/2" 4" 4" I.D.
6" Round 6" Round 6" Round 4-1/2" x 9-3/4" Oval
I.D. I.D. I.D. I.D. I.D. I.D. 3"
I.D.
21" 16" 21" 19"
16" 21" 16" 14"

Part No. Shell Diameter Overall Length Shell Length Inlet Diameter Outlet Diameter Offset Inlet-Outlet
DYN17219* 4-1/2" x 9-3/4" 19" 14" 2-1/2" 2-1/2" Side - Center
DYN17221* 4-1/2" x 9-3/4" 19" 14" 3" 3" Side - Center
DYN17222* 4-1/2" x 9-3/4" 19" 14" 2-1/2" 2-1/2" Side - Side
DYN17223* 6" Round 21" 16" 3" 3" Center - Center
DYN17224* 6" Round 21" 16" 3-1/2" 3-1/2" Center - Center
DYN17225* 6" Round 21" 16" 4" 4" Center - Center
DYN17229* 4-1/2" x 9-3/4" 19" 14" 3" 3" Side - Side
DYN17296* 6" Round 20" 16" 3" 3" Center - Center
* All inlet and outlet diameters listed are inside diameter.

Super Turbo Muffler

The Super Turbo’s patented flow directors channel exhaust flow and reduce
backpressure for maximum power and fuel economy. Fiberglass matting delivers
a mellow, true performance sound and the case and components are 100%
aluminized for long life.
Part No. Shell Diameter Overall Shell Inlet Outlet Offset Inlet-
Length Length Diameter Diameter Outlet
DYN17676* 4-1/4" x 9-3/4" 15-1/2" 14" 2-1/2" 2-1/2" Side - Side
DYN17730* 4-1/4" x 9-3/4" 18-1/2" 14" 2" 2" Side - Center
DYN17731* 4-1/4" x 9-3/4" 18-1/2" 14" 2-1/4" 2-1/4" Side - Center
DYN17732* 4-1/4" x 9-3/4" 18-1/2" 14" 2-1/4" 2-1/4" Side - Side DYN17734
DYN17733* 4-1/4" x 9-3/4" 18-1/2" 14" 2-1/2" 2-1/2" Side - Center
DYN17734* 4-1/4" x 9-3/4" 18-1/2" 14" 2-1/2" 2-1/2" Side - Side
DYN17739* 4-1/4" x 9-3/4" 24" 19" 2-1/2" 2-1/2" (2) Side - Dual
DYN17744* 4-1/4" x 9-3/4" 20" 14" 3" 3" Side - Center
DYN17747* 4-1/4" x 9-3/4" 25-1/2" 20" 2-1/4" 2-1/4" Side - Center
DYN17748* 4-1/4" x 9-3/4" 25-1/2" 20" 2-1/2" 2-1/2" Side - Center
DYN17749* 4-1/4" x 9-3/4" 25-1/2" 20" 2-1/2" 2-1/2" Side - Side
DYN17769* 5-1/2" x 11" 27" 20" 3" 3" Side - Center
DYN17793* 5-1/2" x 11" 23" 16" 3" 3" Side - Center
* All inlet and outlet diameters listed are inside diameter.

2023 - 2024 HOT ROD AND EARLY MUSCLE 163

Thrush Aluminized Muffler Thrush® Rattler
They are 100% aluminized Single-chamber, 100% welded, aluminized steel
and fully welded for long construction. Aggressive sound with high-temp black
lasting performance. finish.
The two-chamber design Part No. Overall Length Inlet/Outlet
produces a deep muscle- DYN24253 18" 2.25" / 2.25"
car tone. All mufflers have a DYN24254 18" 2.50" / 2.50"
9-1/2" x 4" x 13" body and are DYN24255 18" 3.00" / 3.00"
19" long overall. DYN24256 18" 4.00" / 4.00"
Part No. Description
DYN17655 Offset-Center, 2-1/4" Thrush® Turbo Exhaust Systems
DYN17656 Offset-Center, 2-1/2"
DYN17657 Offset-Center, 3"
DYN17658 Offset-Offset, 2-1/4"
DYN17659 Offset-Offset, 2-1/2"
DYN17660 Offset-Offset, 3"
DYN17661 3.00" Center-Dual, 2-1/2"

Systems are made of 2-1/2" smooth-bend full-aluminized

Thrush Hush Mufflers™ tubing and include all hangers, brackets, and related
The improved tri-flow design hardware. Thrush Turbo exhaust systems are a perfect
of the Hush Thrush™ Super match for DynoMax® Blackjack® and Cyclone® headers.
Turbo™ enhances flow and History, horsepower, and unbeatable value – that’s the
performance. Available in Thrush advantage.
today’s most popular sizes,
all mufflers are reversible for
Dual Kit Part
maximum installation and Application Engine No.
flexibility. Buick
Overall Shell Inlet Outlet Skylark 1964-72 265-400CH DYN89023
Part No. Inlet/Outlet Shell Diameter Length Skylark 1964-72 396-454CH DYN89023
Length I.D. I.D.
DYN17631 Side-Center 4-1/4" x 9-3/4" 18-1/2" 14" 2-1/4" 2-1/4" Chevrolet
DYN17633 Side-Center 4-1/4" x 9-3/4" 18-1/2" 14" 2-1/2" 2-1/2" Camaro* 1967-74 265-400 DYN89021†
DYN17635 Side-Center 4-1/4" x 9-3/4" 20" 14" 3" 3" Camaro* 1967-74 396-454 DYN89021†
Chevelle 1964-72 265-400 DYN89023
Thrush Turbo Mufflers Chevelle 1964-72 396-454 DYN89023
Malibu 1964-67 265-400 DYN89023
The Thrush patented “reverse- Malibu 1967-64 396-454 DYN89023
flow” design offers top Monte Carlo 1970 -72 265-400 DYN89023
performance at a reasonable Monte Carlo 1970-72 396-454 DYN89023
price. The time-proven spun- Nova 1967-74 265-400 DYN89021†
locked head provides a leakproof Nova 1967-74 396-454 DYN89021†
seal. All Thrush Turbos are reversible and are packed with Oldsmobile
expandable bushings for maximum installation flexibility. Cutlass 1965-72 350-455OL DYN89023
Side inlet/center outlet. Cutlass 1964-72 265-400CH DYN89023
Cutlass 1964-72 396-454CH DYN89023
Overall Shell Inlet Outlet
Part No. Shell Diameter Pontiac
Length Length I.D. I.D.
DYN17711 4-1/4" x 9-3/4" 18-1/2" 14" 2" 2" Firebird* 1970-74 326-455PO DYN89021†
DYN17713 4-1/4" x 9-3/4" 18-1/2" 14" 2-1/4" 2-1/4" Firebird* 1967-74 265-400CH DYN89021†
DYN17715 4-1/4" x 9-3/4" 18-1/2" 14" 2-1/2" 2-1/2" Firebird* 1967-74 396-454CH DYN89021†
DYN17718 4-1/4" x 9-3/4" 25" 20" 2-1/2" 2-1/2" GTO, LeMans, Tempest 1964-72 265-400CH DYN89023
GTO, LeMans, Tempest 1964-72 396-454CH DYN89023

Thrush Glasspack Mufflers * Except Convertible † Duals with single transverse muffler.

Thrush Glasspacks
are packed with CRF Slant Cut Stainless Steel Tips
(Continuous Roving Made of 304 mirror polished stainless
Fiberglass) for powerful tone and long life. All glasspacks steel with an embossed DynoMax logo. Easy to
are of straight-through design for maximum power and install, clamp-on design, with a stainless steel band
flow. clamp included. Sold individually.
Overall Shell Part No. Type Inlet ID Outlet OD Length
Part No. Length Length Inlet I.D. DYN36484 Single Wall 2.5" 4.0" 6.0"
DYN24200 25" 20" 2" 2" 2" 3-1/2" DYN36505 Double Wall 3.0" 4.0" 6.0"
DYN24201 25" 20" 2-1/4" 2-1/4" 2" 3-1/2" DYN36506 Single Wall 3.0" 4.0" 9.0"
DYN24214 28" 23" 2-1/2" 2-1/2" 2-1/2" 4 DYN36486 Single Wall 2.5" 3.0" 12.0"
DYN36488 Single Wall 2.5" 4.0" 12.0"
DYN36473 Double Wall 2.5" 4.0" 12.0"
DYN36474 Single Wall 3.0" 4.0" 12.0"

164 2023 - 2024 HOT ROD AND EARLY MUSCLE

I.D. – O.D. 45° Elbows Mandrel J-Bends
Part No. Tube O.D. Radius Part No. Tube O.D. Radius Size
Aluminized Steel – 16 Gauge T-409 Stainless Steel – 16 Gauge
DYN42760* 3" 6" DYN42426 2" 3"
* Mandrel bent DYN42432 2-1/2" 4-1/4"
Aluminized Steel – 16 Gauge
DYN42310 2" 3-1/2"
DYN42392 2-1/2" 3-1/2"

O.D. – O.D. 45° Elbows

Part No. Tube O.D. Radius
Aluminized Steel – 16 Gauge Mandrel U-Bends
DYN41428* 3" 6"
Part No. Tube O.D. Radius Size
* Mandrel bent Aluminized Steel – 16 Gauge
DYN42394 2-1/4" 6"
DYN42323 3" 5"

O.D. – Turn Downs

Part No. Diameter Length
Aluminized Steel – 16 Gauge I.D. – O.D. 90° Elbows
DYN41094 2-1/2" 10" Part No. Tube O.D. Radius
Aluminized Steel – 16 Gauge
DYN41001 2" 4"
DYN41002 2-1/2" 4"
Universal Aluminized
X-Pipe
Part No.
DYN88327
Description
2-1/2" O.D.
O.D. – O.D. 90° Elbows
Part No. Tube O.D. Radius
Aluminized Steel – 16 Gauge
DYN41432* 2-1/2" 5"
* Mandrel bent

Clamps

DynoMax® MEGA Clamps

Lap Joint DynoMax® MEGA Clamps Butt Joint
Stainless Steel Stainless Steel AccusealTM 430 Bright Stainless Connects O.D. to Stainless Connects O.D. to O.D.
Size U-Clamps Band Clamps Stainless Steel I.D. Pipes or I.D. to I.D. Pipes
2-1/4" — DYN35621 DYN36437 — DYN33229
2-1/2" DYN32218 DYN35979 DYN36438 DYN33226 DYN33240
2-3/4" — — — DYN33227 DYN33241
3" DYN32219 DYN35978 — DYN33272 DYN33278
3-1/2" — — — DYN33273 DYN33279

Ultra Flo Muffler

DYN17221
Ultra Flo stainless steel performance mufflers feature 100%
welded construction for lifelong durability. The unrestricted,
straight-through design offers proven flow up to 2000 SCFM
and supports up to 2,000 HP. The patented CRF Technology
absorbs unwanted interior noise.

2023 - 2024 HOT ROD AND EARLY MUSCLE 165

Pro-Kits
The Eibach Pro-Kit dramatically improves a vehicle’s performance
and appearance. Often inherent from the factory, or the result
of performance wheels and tires, a huge fender-well gap will
give a “lifted” look. The Pro-Kit reduces the fender gap for a
lower, sportier stance. Pro-Kits offer aggressive good looks and
enhanced vehicle handling without compromising safety or ride
quality. Black powder-coated finish.
Model Year Pro-Kit Front Rear
Chevrolet
Camaro and Z-28, V8 Exc.
1982-92 EIB3801.140 1.0"† 1.0"
Convertible
Ford
Mustang and Cobra 5.0 V8,
1979-93 EIB3510.140 1.2" 1.0"
Exc. Convertible
Mercury
Capri, 4 Cyl. 1979-86 EIB3518.140 1.2" 1.0"
Capri, V8 1979-86 EIB3510.140 1.2" 1.0"
Pontiac
Firebird and Trans Am, V8,
1982-92 EIB3801.140 1.0"† 1.0"
Incl. Convertible
† Varies by engine size and/or model.

Sportline Kits
The Eibach Sportline Kit provide a more aggressive-looking lowered
stance than the Pro-Kits, for a lower center of gravity and improved
handling. Red powder-coated finish.
Model Year Pro-Kit Front Rear
Chevrolet
Camaro and Z-28, V8 exc.
1982-92 EIB4.0138 1.6" 1.3"
Convertible
Ford
Mustang and Cobra V8, exc.
1979-2004 EIB4.1035 1.7" † 1.5"
Convertible
Pontiac
Firebird and Trans Am, V8,
1982-92 EIB4.0138 1.6" 1.3"
exc. Convertible
† Varies by engine size and/or model.

Pro-Lite 350 Hose

Pro-Lite 350 Racing Hose is designed for use with Earl’s Swivel-Seal or Auto-Crimp hose ends.
Hose is ultra lightweight, yet delivers superior durability and resistance to high temperatures.
Provides savings up to 30 pounds when replacing the braided steel oil, fuel, and coolant hoses
on a race car using a dry sump type engine. Manufactured with an abrasion-resistant nylon
sheathing, bonded to the textile inner braid embedded in the synthetic rubber liner.
Hose Max. Oper. Burst Min. Bend 3 Ft. 6 Ft. 10 Ft. 20 Ft.
Size I.D. O.D. Pressure Pressure Radius Part No. Part No. Part No. Part No.
-4 .22" .44" 350 1400 2.00" EAR350304ERL EAR350604ERL EAR351004ERL EAR352004ERL
-6 .35" .55" 350 1400 2.25" EAR350306ERL EAR350606ERL EAR351006ERL EAR352006ERL
-8 .44" .65" 350 1400 3.50" EAR350308ERL EAR350608ERL EAR351008ERL EAR352008ERL
-10 .57" .80" 350 1400 4.00" EAR350310ERL EAR350610ERL EAR351010ERL EAR352010ERL
-12 .69" .94" 350 1400 4.50" EAR350312ERL EAR350612ERL EAR351012ERL EAR352012ERL
-16 .88" 1.16" 300 1200 5.50" EAR350316ERL EAR350616ERL EAR351016ERL EAR352016ERL

166 2023 - 2024 HOT ROD AND EARLY MUSCLE

Ano-Tuff Swivel-Seal Hose Ends
Ano-Tuff hose-ends are made from hard anodized aluminum offer exceptional 45° Swivel
resistance to wear and corrosion. Hose ends have a bright, black anodized finish and 90° Swivel Tube
are compatible with Perform-O-Flex, Auto-Flex, and Pro-Lite 350 hose. Low Profile
Hose 45° 45° 90° 90° 120° 180°
Size Straight Low Profile Tube Low Profile Tube Tube Tube
-6 EARAT800106ERL EARAT804506ERL EARAT804606ERL EARAT809006ERL EARAT809106ERL EARAT812006ERL EARAT818006ERL
-8 EARAT800108ERL EARAT804508ERL EARAT804608ERL EARAT809008ERL EARAT809108ERL EARAT812008ERL EARAT818008ERL
-10 EARAT800110ERL EARAT804510ERL EARAT804610ERL EARAT809010ERL EARAT809110ERL EARAT812010ERL EARAT818010ERL
-12 EARAT800112ERL EARAT804512ERL EARAT804612ERL EARAT809012ERL EARAT809112ERL EARAT812012ERL EARAT818012ERL
-16 EARAT800116ERL — EARAT804616ERL EARAT809016ERL EARAT809116ERL — —

Swivel-Seal™ Aluminum Hose Ends

Swivel-Seal hose ends may be used with Perform-O-Flex, Pro-Lite 350, Auto-Flex,
or Ruff-Stuff stainless braided hoses. The Swivel-Seal has a cutter-style end, 120° Swivel
45° Swivel
used for over forty years in the aerospace industry, and twenty years in automotive Low Profile
Tube
competition. During assembly of cutter-style fittings, the end cuts into the hose,
creating a tight, leakproof seal.
Hose 30° 45° 45° 60° 90° 90° 120° 150° 180°
Size Straight Tube Low Profile Tube Tube Low Profile Tube Tube Tube Tube
-6 EAR800106ERL EAR803106ERL EAR804506ERL EAR804606ERL EAR806106ERL EAR809006ERL EAR809106ERL EAR812006ERL EAR815006ERL EAR818006ERL
-8 EAR800108ERL EAR803108ERL EAR804508ERL EAR804608ERL EAR806108ERL EAR809008ERL EAR809108ERL EAR812008ERL EAR815008ERL EAR818008ERL
-10 EAR800110ERL — EAR804510ERL EAR804610ERL EAR806110ERL EAR809010ERL EAR809110ERL EAR812010ERL EAR815010ERL EAR818010ERL
-12 EAR800112ERL EAR803112ERL EAR804512ERL EAR804612ERL EAR806112ERL EAR809012ERL EAR809112ERL EAR812012ERL EAR815012ERL EAR818012ERL
-16 EAR800116ERL — EAR804516ERL EAR804616ERL — EAR809016ERL EAR809116ERL EAR812016ERL EAR815016ERL EAR818016ERL

Swivel-Seal™ Male Threaded Hose Ends

Swivel-Seal hose ends thread directly into a female port without
adapters. The coupler may be rotated independently of the hose
end, allowing the coupler to be threaded into the port while the Straight
45° 90°
hose and hose end are held stationary.
Use
Male Hose Straight 45° 90°
Thread Size Size Part No. Part No. Part No.
1/8"NPT -6 EAR820162ERL — —
1/4"NPT -6 EAR820106ERL EAR824506ERL EAR829006ERL
3/8"NPT -6 EAR820166ERL EAR824566ERL EAR829066ERL
3/8"NPT -8 EAR820108ERL — EAR829008ERL
1/2"NPT -8 EAR820188ERL — EAR829088ERL

Auto-Fit™ Aluminum Hose Ends

Earl’s Auto-Fit hose ends with nipple ends have the reliability and
appearance of Swivel-Seal ends, but are easier to assemble, and
less expensive. During assembly, the barbed nipple is pushed into
the hose, securing hose between the nipple and socket, providing Straight 45° 90°
a tight, secure seal.
Size Straight 45° Tube 90° Tube 180° Tube
-4 EAR300104ERL EAR304604ERL EAR309104ERL —
-6 EAR300106ERL EAR304606ERL EAR309106ERL EAR318006ERL
-8 EAR300108ERL EAR304608ERL EAR309108ERL —
-10 EAR300110ERL EAR304610ERL EAR309110ERL —
-12 EAR300112ERL EAR304612ERL EAR309112ERL —
-16 EAR300116ERL — EAR309116ERL EAR318016ERL
- 20 — EAR304620ERL EAR309120ERL —

2023 - 2024 HOT ROD AND EARLY MUSCLE 167

Auto-Mate Hose Ends
Auto-Mate hose ends are offered in traditional blue anodized or black Ano-Tuff hard anodized aluminum. Hose ends
are compatible with Auto-Flex or Perform-O-Flex stainless steel braid protected hoses and allow the installation of
professional, reliable plumbing at an economical price. Requires auto crimp collars listed below.
Blue Anodized Part No. Ano-Tuff Part No. Hose End Adapter Size Hose Size
Straight
EAR700106ERL EARAT700106ERL -6 -6 -6
EAR700108ERL EARAT700108ERL -8 -8 -8
EAR700110ERL EARAT700110ERL -10 -10 -10
EAR700112ERL EARAT700112ERL -12 -12 -12
45°
EAR704606ERL EARAT704606ERL -6 -6 -6
EAR704608ERL EARAT704608ERL -8 -8 -8
— EARAT704610ERL -10 -10 -10
EAR704612ERL EARAT704612ERL -12 -12 -12
90°
EAR709106ERL EARAT709106ERL -6 -6 -6
EAR709108ERL EARAT709108ERL -8 -8 -8
EAR709110ERL EARAT709110ERL -10 -10 -10
EAR709112ERL EARAT709112ERL -12 -12 -12

Aluminum Tubing Adapters Auto Crimp Collars

Adapt AN fittings to aluminum tubing. Required for use with the above Auto-Mate hose ends.
Part No. AN Size Tube Size Sold individually.
EAR165056ERL -6 Male 5/16"
Hose Hose
EAR165006ERL -6 Male 3/8" Part No. End Size
EAR165156ERL -6 Female 5/16" EAR798043ERL -4 -4
EAR165106ERL -6 Female 3/8" EAR798063ERL -6 -6
EAR165108ERL -8 Female 1/2" EAR798083ERL -8 -8
EAR798103ERL -10 -10
Super Stock Hose EAR798163ERL -16 -16
Earl’s Super Stock hose is a blue, high-quality synthetic rubber hose reinforced with an internal braided­fabric sheath. For
use with Earl’s Super Stock hose ends only. Super Stock hose is rated at 250 PSI and 250°F and is an excellent replacement
for original equipment applications. Should not be used with brake fluid. On applications where maximum temperature range
is expected, compression­of the Super Stock collar is required.
Max. Min.
Hose Oper. Bend 10 Ft. Length 20 Ft. Length
Size I.D. O.D. Pressure Radius Part No. Part No.
-6 3/8" 5/8" 250 3" EAR791006ERL EAR792006ERL
-8 1/2" 3/4" 250 5" EAR791008ERL EAR792008ERL
-10 5/8" 15/16" 250 6" EAR791010ERL EAR792010ERL

Super Stock Hose Ends

Super Stock hose ends are an attractive, lightweight direct replacement for the brass push-lock type. Fittings are machined
from aluminum alloy and anodized in red and blue, available in many configurations. Use Super Stock hose ends with Earl’s
Super Stock hose (not intended for use with stainless braid pro­tect­ed hoses). Hose ends are a favorite with professional
racers and in limited production stock applications. End collars may be compressed.
Part No. AN Fitting Size Hose Size. Hose Dia. (in.)
Straight
EAR700167ERL -6 -6 3/8"
EAR700109ERL -8 -8 1/2"
EAR700111ERL -10 -10 5/8"
-12 -12 3/4"
45°
EAR704667ERL -6 -6 3/8"
EAR704609ERL -8 -8 1/2"
EAR704611ERL -10 -10 5/8"
90°
EAR709167ERL -6 -6 3/8"
EAR709109ERL -8 -8 1/2"
EAR709111ERL -10 -10 5/8"

168 2023 - 2024 HOT ROD AND EARLY MUSCLE

Aluminum AN to AN Adapters 90° Elbow
Fitting
Part No. Size
Union Male EAR982106ERL -6
Alum. Part No. Ano-Tuff Part No. Fitting Size EAR982108ERL -8
EAR981503ERL — -3 EAR982110ERL -10
EAR981504ERL EARAT981504ERL -4
EAR981506ERL
EAR981508ERL
EARAT981506ERL
EARAT981508ERL
-6
-8
Port Adapters (O-Ring Seal)
EAR981510ERL EARAT981510ERL -10 Available in traditional blue anodized aluminum or Ano-
EAR981512ERL EARAT981512ERL -12 Tuff, black hard anodized aluminum finishes. An O-ring is
EAR981516ERL EARAT981516ERL -16 included.
Standard Ano-Tuff AN Port
Part No. Part No. Size Thread
EAR985064ERL EARAT985064ERL -6 -4
EAR985006ERL EARAT985006ERL -6 -6
Union Reducer EAR985068ERL EARAT985068ERL -6 -8
Large Fitting Small Fitting Std. Part No. Ano-Tuff Part No. EAR985086ERL EARAT985086ERL -8 -6
-4 -3 EAR991902ERL EARAT991902ERL EAR985008ERL EARAT985008ERL -8 -8
-6 -4 EAR991906ERL — EAR985081ERL EARAT985081ERL -8 -10
-6 -5 EAR991907ERL EARAT991907ERL EAR985009ERL EARAT985009ERL -10 -8
-8 -6 EAR991912ERL EARAT991912ERL EAR985010ERL EARAT985010ERL -10 -10
-10 -6 EAR991914ERL EARAT991914ERL EAR985011ERL EARAT985011ERL -10 -12
-10 -8 EAR991915ERL EARAT991915ERL EAR985013ERL EARAT985013ERL -12 -10
-12 -6 EAR991918ERL — EAR985012ERL EARAT985012ERL -12 -12
-12 -8 EAR991919ERL EARAT991919ERL
-12 -10 EAR991920ERL — Straight Bulkhead
-16 -10 — EARAT991922ERL
-16 -12 EAR991923ERL — Fitting Standard Ano-Tuff
Size Part No. Part No.
-3 EAR963203ERL* —
-3 EAR983203ERL EARAT983203ERL
-4 EAR983204ERL EARAT983204ERL
Flare Reducers -6 EAR983206ERL EARAT983206ERL
-8 EAR983208ERL EARAT983208ERL
Male
Female Fitting Fitting Std. Part No. Ano-Tuff Part No. -10 EAR983210ERL EARAT983210ERL
-6 -4 EAR9892064ERL EARAT9892064ERL -12 EAR983212ERL EARAT983212ERL
-8 -4 EAR9892084ERL EARAT9892084ERL -16 EAR983216ERL EARAT983216ERL
-8 -6 EAR9892086ERL EARAT9892086ERL * Steel Part
-10 -4 — EARAT9892104ERL
-10
-10
-6
-8
EAR9892106ERL
EAR9892108ERL
EARAT9892106ERL
EARAT9892108ERL
45° Bulkhead
-12 -6 EAR9892126ERL EARAT9892126ERL Fitting Standard Ano-Tuff
Size Part No. Part No.
-12 -8 EAR9892128ERL EARAT9892128ERL
-3 EAR983703ERL EARAT983703ERL
-12 -10 EAR9892120ERL EARAT9892120ERL
-4 — EARAT983704ERL
-16 -12 EAR9892162ERL EARAT9892162ERL
-6 — EARAT983706ERL
-8 EAR983708ERL EARAT983708ERL
AN Reducer, O-Ring -10 EAR983710ERL EARAT983710ERL
Part No. Female Fitting Male Fitting -12 EAR983712ERL EARAT983712ERL
EAR989443ERL -4 -3
EAR989464ERL -6 -4 90° Bulkhead
EAR989486ERL -8 -6
EAR989404ERL -10 -8 Fitting Fitting
Part No. Size Part No. Size
— -12 -8
EAR963303ERL -3 EAR983308ERL -8
EAR989410ERL -12 -10
EAR983303ERL -3 EAR983310ERL -10
EAR989411ERL -16 -12
EAR983304ERL -4 EAR983312ERL -12
EAR983306ERL -6
Tee
Hose End Std. Part No. Ano-Tuff Part No. Bulkhead Tee
-3 EAR962403ERL* — Fitting Standard Ano-Tuff
-3 EAR982403ERL EARAT982403ERL Size Part No. Part No.
-4 EAR982404ERL EARAT982404ERL -3 EAR963403ERL* —
-6 EAR982406ERL EARAT982406ERL -3 EAR983403ERL EARAT983403ERL
-8 EAR982408ERL EARAT982408ERL -4 EAR983404ERL —
-10 — EARAT982410ERL -6 EAR983406ERL —
* Steel Part * Steel Part

2023 - 2024 HOT ROD AND EARLY MUSCLE 169

Bulkhead Tee on Run AN Tee Female Swivel on Run
Fitting Hose End Std. Part No. Ano-Tuff Part No.
Part No. Size -3 EAR926103ERL EARAT926103ERL
EAR980403ERL -3 -4 EAR926104ERL EARAT926104ERL
-6 EAR926106ERL EARAT926106ERL
Bulkhead Nut -8 EAR926108ERL EARAT926108ERL
-10 EAR926110ERL EARAT926110ERL
Fitting Quantity Standard Ano-Tuff
Size Per Pkg. Part No. Part No. -12 — EARAT926112ERL
-3 2 EAR502403ERL* —
-3 2 EAR592403ERL EARAT592403ERL AN Female Swivel to Male AN
-4 2 EAR502404ERL* —
-4 2 EAR592404ERL EARAT592404ERL
-6 2 EAR592406ERL EARAT592406ERL
-8 1 EAR992408ERL EARAT992408ERL 90° 90° 45° 45°
-10 1 EAR992410ERL EARAT992410ERL Hose Std. 90° Ano-Tuff 90° Std. 45° Ano-Tuff 45°
-12 1 EAR992412ERL EARAT992412ERL End Part No. Part No. Part No. Part No.
-3 EAR921103ERL EARAT921103ERL EAR924103ERL EARAT924103ERL
-16 1 EAR992416ERL EARAT992416ERL
-4 EAR921104ERL EARAT921104ERL EAR924104ERL EARAT924104ERL
* Steel Part -6 EAR921106ERL EARAT921106ERL EAR924106ERL EARAT924106ERL
-8 EAR921108ERL EARAT921108ERL EAR924108ERL EARAT924108ERL
Straight Female AN Swivel Coupling -10 EAR921110ERL EARAT921110ERL EAR924110ERL EARAT924110ERL
-12 EAR921112ERL EARAT921112ERL EAR924112ERL EARAT924112ERL
Hose End Standard Ano-Tuff
Size Part No. Part No.
-3 EAR915103ERL EARAT915103ERL Tube Nut
-4 EAR915104ERL EARAT915104ERL Qty. Per
-6 EAR915106ERL EARAT915106ERL Std. Part No. Fitting Size Tube Size Pkg.
-8, -6 EAR915186ERL EARAT915186ERL EAR561803ERL* -3 3/16" 2
-8 EAR915108ERL EARAT915108ERL EAR581803ERL -3 3/16" 2
-10 EAR915110ERL EARAT915110ERL EAR581804ERL -4 1/4" 2
-12 EAR915112ERL EARAT915112ERL EAR581806ERL -6 3/8" 2
-16 EAR915116ERL EARAT915116ERL EAR981808ERL -8 1/2 1
EAR981810ERL -10 5/8" 1
* Steel PartTube Sleeve
Qty. Per Fitting
45° Female AN Swivel Part No. Pkg. Size Tube Size
EAR561903ERL* 2 -3 3/16"
to Female AN Swivel Tube Low Profile EAR581903ERL 2 -3 3/16"
Hose Std. Low-Profile Ano-Tuff Low Std. Tube Ano-Tuff Tube EAR581904ERL 2 -4 1/4"
End Part No. Profile Part No. Part No. Part No. EAR581906ERL 2 -6 3/8"
-4 — — — EARAT939204ERL EAR981908ERL 1 -8 1/2"
-6 EAR939106ERL EARAT939106ERL — EARAT939206ERL EAR981910ERL 1 -10 5/8"
-8 — EARAT939108ERL EAR939208ERL EARAT939208ERL
* Steel Part
-10 — EARAT939110ERL — EARAT939210ERL
-12 — EARAT939112ERL — — Caps and Plugs
Qty. Per
Fitting Pkg. Std. Part No. Ano-Tuff Part No.
90° Female AN Swivel AN Caps
-3 2 EAR592903ERL EARAT592903ERL
Tube
to Female AN Swivel Low Profile -4 2 EAR592904ERL EARAT592904ERL
Hose Std. Low-Profile Ano-Tuff Low Std. Tube Ano-Tuff Tube -6 2 EAR592906ERL EARAT592906ERL
End Part No. Profile Part No. Part No. Part No. -8 1 EAR992908ERL EARAT992908ERL
-3 — EARAT934103ERL — — -10 1 EAR992910ERL EARAT992910ERL
-4 EAR934104ERL EARAT934104ERL — — -12 1 EAR992912ERL EARAT992912ERL
-6 EAR934106ERL EARAT934106ERL EAR935106ERL EARAT935106ERL -16 1 EAR992916ERL EARAT992916ERL
-8 EAR934108ERL EARAT934108ERL EAR935108ERL EARAT935108ERL AN Plugs
-10 EAR934110ERL EARAT934110ERL EAR935110ERL EARAT935110ERL -3 2 EAR580603ERL EARAT580603ERL
-12 — EARAT934112ERL EAR935112ERL EARAT935112ERL -4 2 EAR580604ERL EARAT580604ERL
-16 — EARAT934116ERL EAR935116ERL EARAT935116ERL -6 2 EAR580606ERL EARAT580606ERL
-8 1 EAR980608ERL EARAT980608ERL
AN Tee Female Swivel on Side -12 1 EAR980612ERL EARAT980612ERL
-16 1 EAR980616ERL —
Hose End Standard Ano-Tuff
Size Part No. Part No.
-3 EAR925103ERL EARAT925103ERL Port Plug with O-Ring
-4 EAR925104ERL EARAT925104ERL Qty. Per
-6 EAR925106ERL EARAT925106ERL Fitting Pkg. Std. Part No. Ano-Tuff Part No.
-8 EAR925108ERL EARAT925108ERL -6 2 EAR581406ERL EARAT581406ERL
-10 — EARAT925110ERL -8 1 EAR981408ERL EARAT981408ERL
-12 — EARAT925112ERL -10 1 EAR981410ERL EARAT981410ERL
-12 1 EAR981412ERL EARAT981412ERL
-16 1 EAR981416ERL EARAT981416ERL

170 2023 - 2024 HOT ROD AND EARLY MUSCLE

Aluminum Pipe Thread to AN Adapters
Available in standard blue anodized or Ano-Tuff black hard anodized finish.
Fitting NPT Standard Straight Ano-Tuff Straight Standard 45° Ano-Tuff 45° Standard 90° Ano-Tuff 90°
Size Size Part No. Part No. Elbow Part No. Elbow Part No. Elbow Part No. Elbow Part No.
-3 1/8" EAR981603ERL — EAR982303ERL — EAR982203ERL —
-4 1/8" EAR981604ERL EARAT981604ERL EAR982304ERL EARAT982304ERL EAR982204ERL EARAT982204ERL
-4 1/4" EAR981644ERL EARAT981644ERL EAR982344ERL — EAR982244ERL EARAT982244ERL
-6 1/8" EAR981662ERL EARAT981662ERL EAR982362ERL — — EARAT982262ERL
-6 1/4" EAR981606ERL EARAT981606ERL EAR982306ERL EARAT982306ERL EAR982206ERL EARAT982206ERL
-6 3/8" EAR981666ERL EARAT981666ERL EAR982366ERL EARAT982366ERL EAR982266ERL EARAT982266ERL
-6 1/2" EAR981668ERL EARAT981668ERL EAR982368ERL — EAR982268ERL EARAT982268ERL
-8 1/4" EAR981607ERL EARAT981607ERL EAR982307ERL EARAT982307ERL EAR982207ERL EARAT982207ERL
-8 3/8" EAR981608ERL EARAT981608ERL EAR982308ERL — EAR982208ERL EARAT982208ERL
-8 1/2" EAR981688ERL EARAT981688ERL EAR982388ERL — EAR982288ERL EARAT982288ERL
-10 3/8" EAR981611ERL EARAT981611ERL — EARAT982311ERL EAR982211ERL —
-10 1/2" EAR981610ERL EARAT981610ERL EAR982310ERL EARAT982310ERL EAR982210ERL EARAT982210ERL
-10 3/4" EAR981609ERL EARAT981609ERL — — EAR982209ERL EARAT982209ERL
-12 1/2" EAR981613ERL EARAT981613ERL — EARAT982313ERL EAR982213ERL EARAT982213ERL
-12 3/4" EAR981612ERL EARAT981612ERL EAR982312ERL EARAT982312ERL EAR982212ERL —
-16 3/4" EAR981615ERL EARAT981615ERL — — — —
-16 1" EAR981616ERL EARAT981616ERL — — — —

Straight AN Swivel to Male NPT 90° Male AN to Male Swivel NPT

Hose NPT Standard Ano-Tuff Hose NPT Standard Ano-Tuff
End Thread Part No. Part No. End Thread Part No. Part No.
-3 1/8" EAR916103ERL EARAT916103ERL -6 1/4" EAR922106ERL EARAT922106ERL
-4 1/8" EAR916104ERL EARAT916104ERL -6 3/8" — EARAT922166ERL
-4 1/4" EAR916144ERL — -8 3/8" EAR922108ERL —
-6 1/8" EAR916162ERL EARAT916162ERL -10 3/8" — EARAT922111ERL
-6 1/4" EAR916106ERL EARAT916106ERL -10 1/2" EAR922110ERL EARAT922110ERL
-6 3/8" EAR916166ERL EARAT916166ERL -12 1/2" EAR922113ERL EARAT922113ERL
-8 3/8" EAR916108ERL EARAT916108ERL
-8 1/2" EAR916188ERL EARAT916188ERL
-10 3/8" EAR916111ERL EARAT916111ERL
-10 1/2" EAR916110ERL EARAT916110ERL Steel Pipe Thread to AN Adapters
-12 1/2" — EARAT916113ERL
-12 3/4" — EARAT916112ERL 90° Elbow
Part No. Hose End Size NPT Thread Size
90° Female AN to Male Swivel NPT EAR962203ERL -3 1/8"
EAR962204ERL -4 1/8"
Hose End NPT
Part No. Size Thread Size
EAR923103ERL -3 1/8"
EAR923104ERL -4 1/8"
EAR923106ERL -6 1/4"
Gauge Head Adapters
EAR923162ERL -6 1/8"
EAR923166ERL -6 3/8"
EAR923108ERL -8 3/8"
EAR923110ERL -10 1/2"
EAR923111ERL -10 3/8"

Tee Part No. Description

EAR968604ERL -4AN Male Fitting to Female 1/8"NPT, 90°
Hose NPT Standard Ano-Tuff
End Thread Part No. Part No.
NPT Thread on Side
-3 1/8" EAR962503ERL* —
-3 1/8" EAR982503ERL EARAT982503ERL
-4 1/8" EAR982504ERL EARAT982504ERL
-6 1/4" EAR982506ERL EARAT982506ERL
-8 3/8" EAR982508ERL EARAT982508ERL
-10 1/2" — EARAT982510ERL
NPT Thread on Run
-3 1/8" EAR962603ERL* —
-3 1/8" EAR982603ERL EARAT982603ERL
-4 1/8" — EARAT982604ERL
-6 1/4" EAR982606ERL EARAT982606ERL
-8 3/8" — EARAT982608ERL
-10 1/2" EAR982610ERL —
* Steel Part.

2023 - 2024 HOT ROD AND EARLY MUSCLE 171

Aluminum Pipe Thread Adapters Reducer Pipe NPT Hex-Head Plug
Bushing Pipe Standard Ano-Tuff
Thread Size Part No. Part No.
Female Pipe Male Pipe 1/8" EAR993301ERL —
Part No. Thread Size Thread Size
EAR991201ERL 1/8" 1/4" 3/8" EAR993303ERL —
EAR991202ERL 1/4" 3/8" 1/2" EAR993304ERL EARAT993304ERL
EAR991203ERL 1/8" 3/8"
EAR991204ERL 3/8" 1/2"
EAR991205ERL 1/4" 1/2"
Hose Barb to
EAR991206ERL 1/8" 1/2" Pipe Thread Adapters
EAR991207ERL 1/2" 3/4"
Hose NPT Straight 45° 90°
EAR991208ERL 3/8" 3/4" Size Size Part No. Part No. Part No.
EAR991210ERL 3/4" 1" 1/4" 1/8" EAR984004ERL — EAR984204ERL
3/8" 1/4" EAR984006ERL — EAR984206ERL
Female Coupling 1/2" 3/8" EAR984008ERL ­— EAR984208ERL
5/8" 1/2" EAR984010ERL EAR984410ERL EAR984210ERL
Pipe Pipe
Thread Thread 3/4" 3/4" EAR984012ERL — EAR984212ERL
Part No. Size Part No. Size
EAR991001ERL 1/8" EAR991004ERL 1/2" Carburetor, Fuel Pump
EAR991002ERL 1/4" EAR991006ERL 3/4"
EAR991003ERL 3/8" and Power Steering Adapters
Thread Hose
Part No. Size End Application
Male Nipple EAR991942ERL 9/16"-24 -6 Single Inlet Holley
Pipe Pipe EAR991943ERL 7/8"-20 -6 Dual Feed Holley
Thread Thread Pwr. Steer./Fuel
Part No. Size Part No. Size EAR991946ERL 1/2"-20 -6
Pump
EAR991101ERL 1/8" EAR991104ERL 1/2"
Pwr. Steer./Fuel
EAR991102ERL 1/4" EAR991947ERL 5/8"-18 -6
Pump
EAR991103ERL 3/8" EAR991948ERL 7/8"-20 -8 Dual Feed Holley
EAR991950ERL 11/16"-18 -6 Power Steering
Internal/External Pipe Thread EAR991954ERL
14mm x
-6 Power Steering
1.50
Pipe
90° 45° Thread 16mm x
EAR991955ERL -6 Power Steering
Part No. Part No. Size 1.50
EAR991401ERL EAR991501ERL 1/8" 18mm x
90° EAR991956ERL -6 Power Steering
EAR991402ERL EAR991502ERL 1/4" 45° 1.50
EAR991403ERL EAR991503ERL 3/8"
Pressure Gauge Adapters
90° Elbow Part No. Description
Internal pipe thread. EAR100192ERL -6 Male to -6 Male, 1/8" NPT in Hex
EAR100193ERL -6 Male to 1/4" NPT Male, 1/8" NPT in Hex
Part No. Pipe Thread Size
EAR991601ERL 1/8" EAR100194ERL -6 Male to 3/8" NPT, 1/8" NPT in Hex
EAR991603ERL 3/8" EAR100196ERL -8 Male to -8 Male, 1/8" NPT in Hex
EAR100198ERL -8 Male to 3/8" NPT, 1/8" NPT in Hex
EAR100199ERL -6 Male to -6 Female, 1/8" NPT in Hex
Tee EAR100200ERL -8 Male to -8 Female, 1/8" NPT in Hex
Internal pipe thread. EAR100201ERL -4 Male to -4 Female, 1/8" NPT in Hex
Part No. Pipe Thread Size
EAR991701ERL 1/8" Fuel Pressure Gauges
EAR991702ERL 1/4"
Part No. Description
EAR991703ERL 3/8"
EAR100189ERL 1/8" NPT Male, Oil Filled
EAR100195ERL 1/8" NPT Male EAR100189ERLEAR100195ERL
NPT Plugs
Internal wrenching. Ano-Tuff Billet Dual
Pipe
Thread Quantity Standard Ano-Tuff Feed Fuel Line Kits
Size Per Pkg. Part No. Part No. Dual-feed fuel line kits
1/16" 2 — EARAT593201ERL feature billet aluminum,
1/8" 2 EAR593202ERL EARAT593202ERL
hard anodized Ano-Tuff fittings with Pro-Lite 350 fuel line.
1/4" 2 EAR593203ERL EARAT593203ERL
3/8" 2 EAR593204ERL EARAT593204ERL
Bowl fittings are contoured for maximum flow. Kits are
1/2" 1 EAR993205ERL EARAT993205ERL designed for Holley 4150/4150 HP and ultra HP carburetors.
3/4" 1 EAR993206ERL — Part No. Description
EARAT101195ERL Pro-Lite 350 Assembly, -6AN Single Inlet 9-1/2" Center
EARAT101295ERL Pro-Lite 350 Assembly, -8AN Single Inlet 9-1/2" Center
EARAT101296ERL Pro-Lite 350 Assembly, -8AN Dual Inlet 9-1/2" Center
EARAT104195ERL Pro-Lite 350 Assembly, -6AN Dual Inlet 9-3/4" Center
EARAT104295ERL Pro-Lite 350 Assembly, -8AN Dual Inlet 9-3/4" Center

172 2023 - 2024 HOT ROD AND EARLY MUSCLE

In-Line Filters Brake Adapter Fittings
Part No. Description Quantity
Part No. Per Pkg. Thread Size
EAR230106ERL -6 Bronze Element Fuel Filter
EAR581531ERL 2 -3AN to 3/8"-24 I.F. Short
EAR230107ERL Replacement Bronze Element
EAR581533ERL 2 -3AN to 3/8"-24 I.F. Long
EAR230108ERL -8 Bronze Element Fuel Filter
EAR591932ERL 2 -3AN to 7/16"-24 I.F.
EAR230206ERL -6 Screen Type Fuel Filter
EAR591941ERL 2 -4AN to 7/16"-20 I.F.
EAR230208ERL -8 Screen Type Fuel Filter
EAR591942ERL 2 -4AN to 7/16"-24 I.F.
EAR230210ERL -10 Screen Type Fuel Filter
EAR591972ERL 2 -4AN to 3/8"-24 I.F. Short
EAR230306ERL -6 Screen Type Oil Filter
EAR591982ERL 2 -4AN to 3/8"-24 I.F. Long
EAR230308ERL -8 Screen Type Oil Filter
EAR592032ERL 2 -3AN to 10mm x 1.0
EAR230310ERL -10 Screen Type Oil Filter
EAR592042ERL 2 -4AN to 10mm x 1.0
-3AN Replacement Olive for Speed-Seal
Shut-Off Valves EAR699030ERL 1
Hose End
350 PSI max valves are ideal for use as EAR972050ERL 1
Junction Block, Two 3/8"-24 I.F. Ports,
emergency fuel shut-off valves, anti- One 3/8"-24 Straight on Branch, 1/4" Mtg. Hole
Junction Block, Three 3/8"-24 I.F. Ports,
theft devices, or as drain valves. EAR972052ERL 1
7/16" Mtg. Hole
Inlet Outlet Overall EAR972054ERL 1 Junction Block “T”, 3/8"-24 I.F.
Part No. Size Size Length Body Material EAR989534ERL 1 -3AN to Female 10mm x 1.0
3/8" NPT Chrome-Plated
EAR230501ERL 3/8" NPT Female 1-3/4" EAR989543ERL 1 -3AN to 3/8"-24 Female I.F.
Female Brass
EAR989545ERL 1 -3AN to 10mm x 1.0 I.F.
3/8" NPT Red Anodized
EAR230502ERL -6AN Bulkhead 2-3/4" EAR989548ERL 1 -4AN to 7/16"-24 I.F..
Female Aluminum
EAR989549ERL 1 -3AN to 7/16"-24 I.F.
3/8" NPT Red Anodized
EAR230503ERL -8AN Bulkhead 2-3/4"
Female Aluminum Note: I.F. signifies inverted flare fitting.
1/2" NPT Red Anodized
EAR230505ERL -10AN Bulkhead 2-3/4"
Female Aluminum
Aluminum and Steel Weld Fittings
Speed-Seal Hose Ends Aluminum
Part No.
Steel
Part No. Size
Hose ends are ideal for use with smooth Male AN
bore PTFE hose on brake fittings. EAR997104ERL EAR967104ERL -4AN
Hose Nut Aluminum Steel Stainless EAR997106ERL EAR967106ERL -6AN EAR997104ERL
Size Size Part No. Part No. Part No. EAR997108ERL EAR967108ERL -8AN
Straight EAR997112ERL EAR967112ERL -12AN
-3 -3 EAR600133ERL EAR600103ERL EAR600193ERL EAR997116ERL EAR967116ERL -16AN
-4 -4 EAR600134ERL EAR600104ERL — EAR997120ERL — -20AN
-6 -6 EAR600136ERL — EAR600196ERL Female AN
90° Non-Adjustable Tube EAR987106ERL — -6AN EAR987106ERL
-3 -3 — EAR609103ERL — EAR987112ERL — -12AN
90° Adjustable Tube Female NPT
-3 -3 — — EAR609293ERL EAR996701ERL — 1/8" NPT
EAR996703ERL — 3/8" NPT
Banjo Fittings EAR996704ERL — 1/2" NPT
EAR996706ERL — 3/4" NPT
Hole EAR996701ERL
Part No. Description Thread Size Dia.
EAR977503ERL Banjo Bolt 3/8"-24 3/8" O-Rings
EAR977504ERL Banjo Bolt 7/16"-20 7/16" Buna N O-rings are compatible with most fuels and
EAR977515ERL Banjo Bolt 10mm x 1.25 10mm lubricants up to 275°F, while Viton O-rings can handle
EAR977517ERL Banjo Bolt 10mm x 1.0 10mm Banjo Bolt 400°F temperatures, synthetic lubricants, oxygen-
EAR997603ERL Banjo -3AN 3/8" bearing fuels, additives and non-ether brake fluids.
EAR997604ERL Banjo -4AN 7/16"
EAR997631ERL Banjo -3AN 10mm Viton Buna N Package Fitting
Part No. Part No. Qty. Size
EAR997634ERL Banjo -3AN 7/16"
EAR176106ERL EAR176006ERL 10 -6
EAR997641ERL Banjo -4AN 10mm Banjo EAR176108ERL EAR176008ERL 10 -8
EAR997643ERL Banjo -4AN 3/8"
EAR176110ERL EAR176010ERL 5 -10
EAR176112ERL EAR176012ERL 5 -12
Crush Washers ­— EAR176016ERL 5 -16
Required with straight threaded adapter fittings or ports
without O-ring relief. Stat-O-Seals
Package Fitting Synthetic rubber O-ring is mechanically locked to the I.D.
Part No. Qty. Size I.D. of an aluminum washer. Compresses when tightening,
EAR177003ERL 10 -3 3/8" forcing the sealing surfaces around the bolt shank.
EAR177004ERL 10 -4 7/16" Temperature range of -85°F to 450°F. Two per pack.
EAR177006ERL 10 -6 9/16"
Inside Inside
EAR177008ERL 5 -8 3/4" Part No. Dia. Part No. Dia.
EAR177010ERL 5 -10 7/8" EAR178005ERL 5/16" EAR178009ERL 9/16"
EAR178006ERL 3/8" EAR178010ERL 5/8"
EAR178007ERL 7/16" EAR178012ERL 3/4"
EAR178008ERL 1/2" EAR178014ERL 7/8"

2023 - 2024 HOT ROD AND EARLY MUSCLE 173

Performer Carburetors Carburetor
Quite possibly the closest Calibration Kits
thing to a “bolt-on and Each kit includes one pair of metering rod retaining
drive it” carburetor springs and assorted pairs of metering rods, jets, and
available anywhere. step-up springs. Kits are available for Thunder Series AVS
Choose from a variety and Performer Series carburetors.
of CFM ratings and
Part No. Description
manual or electric choke
Performer Series
versions. The Edelbrock Performer carburetor provides EDE1479 Calibration Kit for EDE1405
tremendous throttle response, easy starting, and EDE1480 Calibration Kit for EDE1407, EDE1410, EDE1412, EDE1413
excellent economy. EDE1486 Calibration Kit for EDE1404
Part No. Description EDE1487 Calibration Kit for EDE1406
EDE1403 500 CFM, Electric Choke Thunder Series
EDE1404 500 CFM, Manual Choke EDE1840 Calibration Kit for EDE1805, EDE1806
EDE1405 600 CFM, Manual Choke EDE1841 Calibration Kit for EDE1812, EDE1813
EDE1406 600 CFM, Electric Choke
EDE1407 750 CFM, Manual Choke Metering Jets and Metering Rods
EDE1411 750 CFM, Electric Choke
Designed for fine tuning Edelbrock Performer Series and
EDE1412 800 CFM, Manual Choke
Thunder Series AVS carburetors. Sold in pairs.
Part No. Size Part No. Cruise/Power Part No. Cruise/Power
Thunder Series AVS Carburetors Metering Jets Metering Rods Metering Rods
Thunder Series AVS carburetors offer the same EDE1420 0.077" EDE1441 0.062" x .052" EDE1450 0.070" x .042"
features as the dependable Edelbrock Performer Series EDE1421 0.080" EDE1444 0.065" x .037" EDE1451 0.070" x .047"
carburetors with the addition of an Adjustable Valve EDE1422 0.083" EDE1445 0.065" x .047" EDE1418 0.070" x .057"
Secondary (AVS). The AVS EDE1423 0.086" EDE1460 0.065" x .052" EDE1453 0.071" x .047"
also has a machined body EDE1424 0.089" EDE1462 0.067" x .049" EDE1454 0.073" x .037
and black-plated hardware EDE1425 0.092" EDE1463 0.067" x .055" EDE1455 0.073" x .042"
for great looks. AVS carbs EDE1426 0.095" EDE1446 0.068" x .042" EDE1456 0.073" x .047"
may be used with dual fuel EDE1427 0.098" EDE1447 0.068" x .047" EDE1457 0.073" x .052"
EDE1428 0.100" EDE1448 0.068" x .052" EDE1458 0.075" x .037"
inlets for added volume.
EDE1429 0.101" EDE1436 0.068" x .057" EDE1419 0.075" x .042"
Part No. Description EDE1430 0.103" EDE1449 0.070" x .037" EDE1459 0.075" x .047"
EDE1913 800 CFM, Electric Choke EDE1431 0.107"
* Endurashine finish. EDE1432 0.110"
EDE1433 0.113"
AVS2 Series™ Carburetors EDE1434 0.116"
EDE1435 0.119"
These 650 CFM AVS2 Series carburetors feature annular
flow primary boosters with new calibration for improved
off idle and cruising performance. The annular flow
booster design delivers improved fuel atomization to
eliminate flat spots that may be encountered when the Carburetor Accessories
carburetor transitions A wide variety of accessories and maintenance
from idle to full throttle. parts are available for Thunder Series AVS and
Manufactured with both Performer Series carburetors. EDE8089
timed and full vacuum Part No. Description
ports for ignition EDE1464 Step-Up Spring Assortment, (5) Pairs
advance. Available in EDE1465 Off-Road Needles and Seats, Pair
either manual or electric EDE1466 High-Flow Needles and Seats, Pair
choke versions. Made in EDE1467 Accelerator Pump for EDE1407 and EDE1411
USA. EDE1906 EDE1469 Float Kit, Includes (2) Floats, (2) Pins, and Gauge
EDE1470 Accelerator Pump Plunger
Part No. Description
EDE1472 Horn/Main Gasket Kit
EDE1905 650 CFM Square Flange Carburetor, Manual Choke
EDE1473 Performer Series Linkage Kit, (7) Links and (6) Retaining Clips
EDE1906 650 CFM Square Flange Carburetor, Electric Choke
EDE1474 Choke Cap Kit, Cap, Gasket, (3) Screws, and (3) Locking Tabs
EDE1475 (3) Accelerator Pump Nozzles: .024", .033", .043", and Gaskets
EDE1477 Master Rebuild Kit
EDE1478 Electric Choke Kit
EDE1481 Chrysler Throttle Lever Adapter, 1966-Up
EDE1483* Ford Throttle Lever Adapter, 1968-Up
EDE1499 (5) Replacement Air Horn Gaskets
EDE3899 Carburetor Base Gasket
EDE7094 Dual-Quad Progressive Throttle Linkage
EDE8087 -6AN Carb Inlet Fitting
EDE8089 3/8" Banjo Carb Inlet Fitting
EDE8090 3/8" Tube Inverted Flare Fitting
* Requires appropriate throttle cable plate kit.

174 2023 - 2024 HOT ROD AND EARLY MUSCLE

Fuel Line Accessories Victor Series 130 Fuel Pumps
Fuel lines A must for any application that
are ready demands a high-volume fuel
to install. delivery. Produce 10 PSI with
Available for a flow capacity of 130 gallons
single-feed per hour. Must be used with an
Performer external fuel pressure regulator
and dual- such as EDE8190 or EDE1727. For
feed Thunder gasoline only. Clockable lower
Series AVS housing can be rotated for best inlet/outlet alignment.
carburetors. The fuel line and filter kit for Edelbrock Part No. Description
Performer Series carburetors includes a chromed hard EDE1711† Small Block Chevrolet
steel line and Russell fuel filter. The pre-fitted stainless EDE1712† Big Block Chevrolet
lines connect the fuel filter to an Edelbrock street fuel EDE1715† 289-351W Ford
pump with 3/8"NPT. The chromed steel fuel line has a † Not legal for sale or use on pollution-controlled motor vehicles.
barbed end and no fuel filter for universal use.
Part No. Description Quiet-Flo™ Electric Fuel Pumps
Performer Series Single-Feed Fuel Line Kits
EDE8126 Chromed Steel Fuel Line Kit Only
for Carbureted Applications
EDE8131 Chromed Steel Fuel Line and Polished Filter Kit With anodized aluminum housings
EDE8134 Chromed Steel Fuel Line and Blue Anodized Filter Kit and high-quality internals, pumps
Thunder AVS Series Dual-Feed Fuel Line Kits are both strong and durable.
EDE8128 Chromed Steel Fuel Line and Polished Filter Kit Each pump is factory-tested and
EDE8132 Chromed Steel Fuel Line Kit Only includes mounting brackets. The
Fuel Filter Only carbon fiber vanes and composite
EDE8129 Polished Aluminum Filter Only rotors give these pumps the added
EDE8130 Blue Anodized Aluminum Filter Only
boost for maximum performance. This pump is factory
Stainless Lines (From Fuel Filter To Pump)
EDE8123 Small Block Chevys
preset to 12 PSI and requires an external regulator such
EDE8124 Big Block Chevys
as EDE1727.
Installation Accessories Part No. Description
EDE7094 Dual Quad Throttle Linkage Kit EDE1791 120 GPH, 3/8"NPT Inlet/Outlet, Black
EDE8088 Dual Quad Fuel Line Kit EDE1792 160 GPH, 1/2"NPT Inlet/Outlet, Black
Fuel Pressure Regulator
Adjustable Dual-Feed Fuel Line Kit EDE1727 160 GPH with Single 3/8"NPT Inlet and Dual 3/8"NPT Outlets

EDE8101 Quiet-Flo™ Electric Fuel Pumps

Designed State-of-the-art electric
for Holley fuel pumps offer maximum
dual-feed performance in a compact
carburetors, package. Features anodized
fuel line billet aluminum housings,
adjusts from 7-1/2" to 11-1/2" to fit a wide range of models. carbon vanes, and composite
Braided stainless steel assembly includes carburetor rotors, which runs 4-14 db
bowl fittings and 1/8" NPT port for a fuel pressure gauge. quieter than other pumps
at the same pressure.
Street Performer RPM Fuel Pumps Replaceable screen-type
Mechanical pumps match the demands of the Performer inlet filter traps fine particles
Series Carburetors. Pumps have six valves and produce from entering the pump. The 120 GPH free-flow pump
6 PSI with a flow capacity of 110 gallons per hour. Capable with preset pressure at 6.5 PSI supports up to 480
of supporting up to 550 horsepower. Fitted with 3/8"NPT horsepower. The 160 GPH free-flow pump with preset
inlet and outlet. For gasoline and mixed fuels only. pressure at 12 PSI supports 1,000+ horsepower. The
Part No. Description 160 GPH fuel pump requires an external fuel pressure
EDE1720 Small Block Chrysler regulator.
EDE1721 Small Block Chevrolet Part No. Description
EDE1722 Big Block Chevrolet EDE182051 120 GPH, 3/8" NPT Inlet/Outlet, Red
EDE1723 Big Block Chrysler EDE182052 120 GPH, 3/8" NPT Inlet/Outlet, Blue
EDE1724 390-428 FE Ford EDE182061 160 GPH, 1/2" NPT Inlet/Outlet, Red
EDE1725 289-351W Ford EDE182062 160 GPH, 1/2" NPT Inlet/Outlet, Blue
EDE1726 429-460 Ford

2023 - 2024 HOT ROD AND EARLY MUSCLE 175

Adjustable Fuel Pressure Regulator Ford Flathead Components
for EFI Applications Ford Flathead Cylinder Heads
EDE1728 EDE1115
Fully machined aircraft-quality aluminum
regulators are fitted with fluorosilicone
diaphragms for extended durability.
Bypass-type regulator is compatible with
gasoline or methanol, and includes 1/8"NPT gauge port.
Designed for EFI applications, regulator is available with
boost reference fitting for blow-through, supercharger,
turbo, etc. applications, and has a 35-90 PSI adjustment
range.

In-Line Street/Strip Electric Fuel Pump Among the oldest and most famous speed equipment
EDE3594 items of all time: the Edelbrock Ford Flathead Finned
Street/Strip fuel Aluminum Cylinder Heads. These heads offer today’s
pump can work as flathead builder the same rugged, internally ribbed
inline booster or as construction, large water capacity, and excellent
a stand-alone unit. breathing capability that established their reputation
Ideal for EFI applications requiring additional pumping many years ago. Made of T-6 tempered 356 aluminum, the
capability due to upgrades like high compression pistons, heads provide an 8:1 compression ratio on a block with
high flow intake manifold, big bore throttle bodies, cam, 3/16" base relief and stock bore and stroke. Edelbrock
turbo kit, supercharger or nitrous (up to 600 HP). Includes recommends Champion H-9 and H-10 commercial spark
mounting brackets. Match with EDE1728 for adjustability plugs with a 7/16" reach. Fits 1949-53 Ford/Mercury 24-
from 35 to 90 PSI. Stud Cylinder Heads (61cc).

Micro Electric Universal Fuel Pumps

Designed for maximum
“94” Carb Rebuild Kit
performance, simple installation EDE1154
and quiet operation. These 12 This kit has
volt universal micro pumps are everything
available for gasoline, E85 and needed to
feature a simple two wire setup. rebuild any
1/8" NPT inlet and 5/16" outlet Edelbrock 94
port. Kits include fuel pump, carburetor.
filter, mounting hardware and Includes
instructions. fuel inlet
Part No. Description seat, fuel
EDE17301 Micro Pump, Gasoline/E85, 38 GPH, 4 PSI-7 PSI inlet needle,
EDE17303 Micro Pump, Gasoline/E85, 30 GPH, 2 PSI-3-1/2 PSI accelerator
EDE17311
Replacement Filter Element, 40 Micron, pump assembly, accelerator pump spring, accelerator
for EDE17301 And EDE17303 check ball, check ball retainer, power valve assembly,
EDE17312 Replacement Filter Element, 100 Micron, for EDE17302 float gauge, and all necessary gaskets.

Fuel Pump and

Regulator Combo Kits
Assembled to take the “94” Round Chrome Air Cleaner
guesswork out of selecting EDE1202
the right fuel pump and
Edelbrock 94 round air
regulator for either
cleaner is designed to work
carbureted or EFI
with any 2-5/8" diameter two-
applications.
barrel carburetor. It features
Kits include fuel
a high-quality paper element
pump, regulator
and a triple-chrome top with a
and installation
brilliant shine.
hardware. Made in
USA.
Part No. Description
Carbureted Fuel Pump & Regulator Kit, Contains Pump and
EDE17923
EDE1727 Regulator

176 2023 - 2024 HOT ROD AND EARLY MUSCLE

Throttle Lever Adapters Carburetor Adapter Plate
Part No. Description EDE2732
EDE1481 Chrysler Throttle Lever Adapter
Use 1/16" thick steel plate to
EDE1483 Ford Throttle Lever Adapter
mount a square-bore carburetor
on a spread bore aluminum
EDE1481 manifold. Not for use with stock
Uni-Syn Carburetor manifolds.
Balancing Instrument
EDE4025 Heat Insulator Gaskets
The perfect tool for Prevents fuel percolation in
synchronizing two, three, Performer Series Carburetors
four, or six carburetors, exposed to extreme underhood
Uni-Syn is a precision temperatures. Use EDE9265 with
instrument which open plenum manifolds such as
offers a visual method Torker II and Victor. Insulator Gasket
of balancing multiple EDE9266 has a divided center to seal the carburetor to
carburetor setups with a dual-plane Performer manifolds. Both gaskets include
high degree of accuracy. extended carburetor studs and are .320" thick.
Includes instructions. Part No. Description
EDE9265 Square-Bore Heat Insulator Gasket
EDE9266 Divided Square-Bore Heat Insulator Gasket
Phenolic Carburetor Spacers
Open-center carburetor spacers
add more plenum volume for Ford 5.0L High-Flow Throttle Bodies
higher RPM performance. 4-hole 5.0 Ford high-flow throttle bodies are available in three
spacers increase low-RPM torque sizes to suit any application, are street legal
and horsepower. for late model 5.0L Fords, and provide
power gains using aftermarket
Part No. Description
EDE8710 1" Tall Open Center
5.0L components. The 70mm
EDE8711 1" Tall 4-Hole Center is a perfect choice for the
EDE8712 2" Tall Open Center Edelbrock 5.0L EFI intake,
EDE8713 2" Tall 4-Hole Center and the 75mm is best suited
for use with radical engine
combinations and requires port
matching to fit most manifolds.
Complete with gaskets.
Part No. Description
EDE3830 65/70mm Replacement Gasket Set
EDE3831 75mm Replacement Gasket Set

Throttle Body Intake Elbows for LS Series And 5.0L Throttle Bodies
Developed using the latest in computational fluid dynamic software, throttle body elbows are the best way to adapt LS1, LS2,
and Ford 5.0L-based throttle bodies to EFI manifolds with traditional square-bore mounting pads.
Part No. Description
Low- and Ultra-Low-Profile Intake Elbows
EDE3847 Ultra-Low-Profile (Up to 90mm Throttle Body to Square-Bore Flange)
EDE3848 Low-Profile (Up to 90mm Throttle Body to Square-Bore Flange)
EDE38483 Low-Profile Intake Elbow with Black Powder-Coated Finish (Up to 90mm Throttle Body to Square-Bore Flange)
High-Flow Intake Elbows
EDE3849 High Flow (Up to 95mm Throttle Body to Square-Bore Flange)
EDE38493 High-Flow Intake Elbow with Black Powder-Coated Finish (Up to 95mm Throttle Body to Square-Bore Flange)
Installation Note: Use of an LS1 throttle body will require Edelbrock throttle body adapter plate EDE2737.

EDE3847 EDE3848 EDE38493

2023 - 2024 HOT ROD AND EARLY MUSCLE 177

Electronic Fuel Injection Systems
Pro-Flo 4 EFI systems offer a complete solution to convert carbureted or older throttle body injection engines to an
advanced sequential fuel injection system. Plug-and-play, self-learning system doesn’t require complex tuning and adjusts
to driving conditions, including weather and altitude. Systems support up to 800 hp. Available for popular GM, Ford, and
Mopar applications. 7” Android tablet with Edelbrock E-tuner app allows easy set-up and monitoring via Bluetooth.
Systems include fully assembled intake manifold with air valve, fuel rails, and injectors; engine control unit; 7” touch-screen
tablet with E-tuner app, wideband O2 sensor, distributor, wiring harness, gaskets, and hardware.

Systems with Traditional Intake Manifold and 4150-Style Throttle Body

Injector
Part No. Application Max HP Rating Size
Small Block Chevrolet
EDE35760 1986 and earlier, std. cylinder 550 29 lb/hr
EDE35770 heads 625 35 lb/hr
EDE35780 Vortec or E-Tec cylinder heads 550 29 lb/hr
LS Chevrolet
EDE35700 Gen III & IV w/ cathedral port 475 29 lb/hr
EDE35710 cylinder heads 550 35 lb/hr
Gen III & IV w/ rectangular port
EDE35740 550 35 lb/hr
cylinder heads
Big Block Chevrolet
1965-later Mark IV / Gen V/VI
EDE35830 396-502 w/ large oval port cyl- 625 35 lb/hr EDE35760
inder heads
1965-later Mark IV / Gen V/VI
EDE35850 396-502 w/ rectangular port 625 35 lb/hr
cylinder heads
Chrysler
EDE35900 318 – 340 - 360 625 35 lb/hr
Ford
EDE35930 289 – 302 - 347 550 29 lb/hr
EDE35950 351W 625 35 lb/hr
EDE35960 390 – 428 FE 625 35 lb/hr
Pontiac
EDE35980 326-455 V8s 625 35 lb/hr

Systems with a Pro-Flo XT Intake Manifold and 90mm Throttle Body

Injector
Part No. Application Max HP Rating Size
LS Chevrolet
EDE35730 550 35 lb/hr
Chrysler
EDE35920 413 – 426 - 440 625 35 lb/hr
EDE35790

178 2023 - 2024 HOT ROD AND EARLY MUSCLE

Small Block Chevy
E-Force 122 Supercharger Kit
These kits are a positive-displacement supercharger that can produce
500+ horsepower on a small-block Chevy engine, utilizing the Eaton®
H122 rotor assembly for maximum efficiency in a compact package.
Intended for 302-400 cubic inch small-block Chevrolets equipped
with long water pumps and stock-style bracketry. Each kit includes
supercharger assembly with Eaton internals, intake manifold, drive
pulleys, belt, gaskets, and all necessary items for ease of installation.
Does not include carburetor. No fabrication or special tools required.
Made in USA. EDE1551
Part No. Application
EDE1551 1957-86 Small Block Chevrolet, Conventional Cylinder Head

Max-Fire Distributors
Featuring a simple three-wire hook-up, these Ready-to-
Run electronic distributors do not require an external
ignition control box. CNC machined from 6061-T6 aluminum
and assembled with a hardened iron drive gear and fully
adjustable mechanical and vacuum advance. Distributor
includes a cap,rotor, retainer, and mechanical advance
curve kit.
Part No. Application
EDE22751
EDE22750 Max-Fire Ready-to-Run Distributor, Chevy V8 Fixed Collar (exc. 348/409)
EDE22751 Max-Fire Ready-to-Run Distributor, Chevy V8 Adjustable Collar (exc. 348/409)
EDE22763 Max-Fire Ready-to-Run Distributor, Chrysler V8 361/383/400, Short Deck
EDE22762 Max-Fire Ready-to-Run Distributor, Chrysler V8 413/426/440, RB Tall Deck
EDE22755 Max-Fire Ready-to-Run Distributor, Ford V8 260/289/302 (exc. 5.0L)
EDE22758 Max-Fire Ready-to-Run Distributor, Ford V8 351W
EDE22756 Max-Fire Ready-to-Run Distributor, Ford V8 351C
EDE22757 Max-Fire Ready-to-Run Distributor, Ford V8 332-428 FE
EDE22764 Max-Fire Ready-to-Run Distributor, Oldsmobile V8 260-455

Universal EFI Sump Fuel Kits

These completely self-contained systems are designed to
provide the necessary high fuel pressure required for EFI
applications in vehicles equipped with an existing low-pressure
carbureted fuel system. They are ideal for engine swap
applications that require constant 35-90 psi fuel pressure.
The unique design of these systems allows them to deliver a
constant fuel pressure with no fuel return line, external fuel
pressure regulator or fuel tank modifications. Complete kit
EDE36031 includes a durable, lightweight plastic fuel sump
tank with high-pressure fuel pump, wiring harness, hose, and
fittings. Fuel sump tank assembly EDE36032 is for builders and
consumers that want to utilize their own hose and fittings.
Part No. Description
EDE36031 Universal EFI Sump Fuel Kit, 67 GPH 35-90 PSI.
EDE36032 Universal EFI Sump Fuel Tank Only, 67 GPH 35-90 PSI.

EDE36031

2023 - 2024 HOT ROD AND EARLY MUSCLE 179

Performer® and Performer® EPS Manifolds
The Performer is a dual-plane, low-rise intake with a 180° firing order and patented runner design for outstanding
performance in the idle-5000 RPM range. The Performer EPS is similar, but offers an increase of 5 horsepower over the
Performer when used with an Edelbrock Performer Series Carburetor.
Performer® RPM Manifolds
The Performer RPM is a dual-plane, high-rise intake with 180° firing order that produces more top-end horsepower and
retains good low-RPM throttle response. Performer RPM range is 1500-6500 RPM.
Performer Air-Gap® and Performer RPM Air-Gap® Manifolds
The air gap separates the runners from hot engine oil for a cooler, denser intake charge resulting in more power. Performer
RPM Air-Gap range is 1500-to-6500 RPM. Performer Air-Gap range is idle-to 5500 RPM.
Description Natural Polished
Chevy Small Block
1987-95, Performer, Non-EGR, Cast Iron Heads EDE2104 —
1987-95, Performer, EGR, Cast Iron Heads EDE3706 —
1987-95, Performer Air-Gap, Non-EGR, Cast Iron Heads EDE2604 —
1986-Earlier, Performer, Non-EGR EDE2101 —
1986-Earlier, Performer, EGR EDE3701 —
1996-On, Performer EPS Vortech, Non-EGR EDE2716 —
1996-On, Performer Vortech EDE2116 —
1986-Earlier, Performer EPS, Non-EGR EDE2701* EDE27011*
1986-Earlier, Performer Air-Gap EDE2601 EDE26011
1955-88, Performer RPM Q-Jet, Non-EGR EDE7104 —
1986-Earlier, Performer RPM EDE7101 — Endurashine
1996-On, Performer RPM Vortech EDE7116 —
1986-Earlier, Performer RPM Air-Gap EDE7501 —
1996-On, Performer RPM Vortech Air-Gap EDE7516 —
1987-95, Performer T.B.I., 305/350 EDE3704 —
1955-86, C-357-B, Three Deuce, Non-EGR EDE5419 —
Chevy Big Block
Performer 2-O Oval Port EDE2161 —
Performer RPM 2-O Oval Port EDE7161 —
Performer RPM 2-R Rectangular Port EDE7163 — Polished
Performer RPM 2-0 Air-Gap Oval Port EDE7561 —
Performer RPM 2-R Air-Gap Rect. Port EDE7562 —
1975-Earlier, Performer RPM Q-Jet, Oval Port, Non-EGR EDE7164* —
1987-90, Performer 454 T.B.I. Mark IV, EGR EDE3764 —
Chrysler
Performer 318/360, Non-EGR EDE2176 —
1992-Later, RPM Air-Gap 340/360, Non-EGR EDE7576* —
Performer RPM 360, Non-EGR EDE7176 —
1992-On, RPM Air-Gap Magnum, Non-EGR EDE7577 — Natural
1972-78, Performer 383, Non-EGR EDE2186 —
Performer RPM 383, Non-EGR EDE7186* —
Performer RPM 440, Non-EGR EDE7193* —
Ford Small Block
Performer 289 EDE2121 —
Performer RPM 302 EDE7121 —
Performer RPM 302 Air-Gap EDE7521 —
Performer 351W, Non-EGR EDE2181 —
Natural
RPM Air-Gap, 351W, EGR EDE7581* —
Performer RPM 351W, Non-EGR EDE7181* —
1972-82 Performer 351M/400, Non-EGR EDE2171* —
Performer 351C, Non-EGR, 4V EDE2665* —
Performer 351C, Non-EGR, 2V EDE2750* —
RPM Air-Gap 351C, Non-EGR EDE7564* —
Ford FE 332-428
Performer 390, Non-EGR EDE2105 —
Performer RPM FE, Non-EGR EDE7105* —
Ford Big Block
Performer 460, Non-EGR EDE2166 —
Performer RPM 460, Non-EGR EDE7166 —
RPM Air-Gap 460, Non-EGR EDE7566* —
Oldsmobile
Performer Olds 350, EGR EDE3711 —
Performer Olds 455, Non-EGR EDE2151* —
Pontiac 326-455
1965-79, Performer Pontiac, Non-EGR EDE2156 —
1965-79, Performer RPM Pontiac, Non-EGR EDE7156* —
* Not legal for sale or use on pollution-controlled motor vehicles.

180 2023 - 2024 HOT ROD AND EARLY MUSCLE

Racing Series Air Cleaner Kit Signature Series
EDE41663 Chrome Valve Covers
Edelbrock’s Racing Series 14" air Covers are triple chrome
cleaner features a flat black textured plated and carry the
finish with diamond-cut raised famous Edelbrock
racing stripes and Edelbrock racing signature. Baffles prevent
logo. Fits most 5-1/8" diameter oil passage through the PCV valve, and rubber grommets
carburetors and throttle bodies. for the breather hole are included.
Includes a black anodized knurled nut, and a high -quality Std. Height Tall
Application
3" pre-oiled, washable filter. Part No. Part No.
AMC 290-401, No Baffle EDE4431 —
SB Chevy 265-400 EDE4449 EDE4649
Pro-Flo 14" Air Cleaner Assembly BB Chevy 396-454 EDE4480 EDE4680
The Pro-Flo high-flow 14" x 3" SB Chrysler 273-360 EDE4495 —
round air cleaner with chrome BB Chrysler 383-440 EDE4491 —
trim is an excellent full flowing SB Ford 289-351W EDE4460 —
racing air cleaner. The pleated Ford 351C, 351M-400 EDE4461 —
high-flow element top delivered Ford 352-428 “FE” EDE4462 —
Ford 429-460 EDE4463 —
improved engine performance
Oldsmobile 260-455 EDE4485 —
over the traditional air cleaner Pontiac 326-455, No Baffle EDE4456 —
top. Fit 5-1/8" diameter carburetor necks. Available in
black with black trim, red with chrome trim, and blue with
chrome trim. Replacement element sold separately. Signature Series Valve Covers,
Part No. Description Air Cleaners, and Breathers
Air Cleaner Kit Signature Series valve covers have
EDE43660 Red with Chrome Trim, Each stock-style breather baffles
EDE43661 Blue with Chrome Trim, Each and accept all emissions
EDE43662 Black with Black Trim, Each equipment, including PCV
Element Only valve. The Pro-Flo® Series
EDE43666 14" x 3" Air Cleaner Element, Red, Each round air cleaners work with
EDE43667 14" x 3" Air Cleaner Element, Blue, Each
5-1/8" diameter carburetors.
EDE43668 14" x 3" Air Cleaner Element, Black, Each
The 10" and 14" air cleaners
have knock-outs in the base and include an adapter for
Racing Series Valve Covers crankcase ventilation. The push-in style valve cover
A flat black textured breathers contain a foam filter element which allows the
finish brings out the engine to properly breathe, traps oil vapor, and prevents
diamond cut finish engine compartment contamination. Fits any 1-1/4"
raised racing stripe and diameter valve cover hole. Black powder-coated finish
Edelbrock racing logo. with raised Edelbrock signature logo.
Valve covers are 2" taller
Part No. Description
than stock, and clear Small Block Chevy Signature Valve Covers
most roller rocker arms EDE4443
(Overall Height 2.8")
and valve train components. Low-profile design clears EDE1203 10" Air Cleaner with 2" Element (Overall Height 3-1/2")
all air conditioning, alternator brackets and aluminum EDE1223 14" Air Cleaner with 2" Element (Overall Height 3-3/4")
rockers. EDE4403 Valve Cover Breather
Part No. Description
EDE41643
Small Block Chevy 262-400 V8, Tall Profile Racing Series Valve Classic Series Valve Covers
Covers, Black, Pair The Classic Series valve
Small Block Ford 289-351W V8 ,Tall Profile Racing Series Valve
EDE41653
Covers, Black, Pair
covers brings the 1950s dress-
up back with the classic finned
Edelbrock nostalgia look for
Elite Series Aluminum Valve Covers hot rods and early muscle
Heavy, polished die- cars. Made of heavy-gauge
cast aluminum valve sand-cast aluminum and
covers are available finally polished to a brilliant
with Edelbrock shine. Fit most standard
signature. Tall-profile rocker arms. Overall height is
valve covers are 2" taller than stock to clear most roller measured from base to highest point of the fins.
rockers and valvetrain components.
Part No. Description
With Logo Description EDE41409 Chevy 348-409 V8, 1-13/16" Tall, Polished, Pair
EDE4263 1959-Later, Chevy 262-400 V8 Tall Profile
EDE4264 Ford 289/302/351W (Not Boss) V8 Tall Profile

2023 - 2024 HOT ROD AND EARLY MUSCLE 181

Classic Finned GM LS Coil Covers
Aluminum Valve Covers EDE41181
Edelbrock classic finned valve Sand-cast polished
covers recapture the classic aluminum coil covers dress
street rod look of an earlier era. up any LS engine in a street
Covers without breather holes EDE4144 machine or muscle car.
can be easily modified to accept breathers EDE4201. They eliminate stock coil
Part No. Description mounting brackets and fit
Black Powder-Coated Finish the coils directly to the underside of the covers. These
EDE41623 Ford FE are intended for LS engines swapped into muscle cars
or street machines and will not fit stock vehicles. Covers
Victor Series Valve Covers accept GM#12558948 coils or aftermarket equivalent
such as MSD8245.
EDE41723
1968-95 Chevy 262-400
valve covers are black Pro-Flo 1000 Series
powder coated with a Reusable Air Cleaner
finely textured surface
for a pleasing and unique
EDE1002
look. Manufactured Fits most 5-1/8" neck carburetors.
from die-cast aluminum, Strong metal inner frame offers
covers have a 1-1/4" minimal flow restriction and excellent
breather hole (centerbolt). filtering. Cleans with soap and water for low-cost
Overall height is 2.50". maintenance.

Billet Aluminum Breathers

Push-in style valve cover breathers contain
Pro-Flo
a foam filter element. Breathers fit any 1-1/4" Chrome Air Cleaners
diameter valve cover hole. Edelbrock Signature air cleaners
Part No. Description are stamped from 18-gauge steel
EDE4213 Polished Finish EDE42133 and triple chrome-plated for high-
EDE42133 Black Powder-Coated Finish quality finish and great looks. EDE1207
Part No. Description
Aluminum Racing Breather EDE1207 14" Air Cleaner, Low-Profile, 3" Tall Filter
EDE1208 10" Air Cleaner, 2" Tall Filter Element
EDE4203 EDE1209 6" Air Cleaner, 2" Tall Filter Element
Die-cast aluminum breather EDE1221 14" Air Cleaner, Fits Edelbrock Carburetor, 3" Tall
for competition or vintage EDE1235 Oval Air Cleaner for Dual Quad Applications
look. The smooth, polished EDE1236 Oval Style for Single Quad Applications
top with distinctive
Edelbrock script adds a
nice detail when used with our Chrome Triangular
Classic finned aluminum valve covers Air Cleaner
for a period-looking engine compartment.
Great addition to classic series valve covers. EDE1222
14-1/8"W x 13-3/8"L with 3-1/2"
Elite Series Push-In Style Breather tall reusable element. Clears HEI
on small block Chevy.
EDE4204
Die-cast, finned, top mounting
2-1/2" tall breathers have the Elite Series
Edlebrock logo, foam elements,
and match Elite valve covers. Round Air Cleaner
EDE4268
Finned air cleaners match Elite
Series valve covers have 14"
diameter with 3" element and
fit 5-1/8" diameter carb necks.
Black anodized knurled nut and
PCV adapter are included.

182 2023 - 2024 HOT ROD AND EARLY MUSCLE

Classic Series Air Cleaners Aluminum Water Pumps
A new line of air cleaners was created
to perfectly match Edelbrock’s
popular classic aluminum finned
EDE8815*
valve covers. Made with heavy- Short-style pump fits
gauge sand-cast aluminum, Classic all 1984-91 350 cu. in.
Series air cleaners are now available in Corvettes. Has 3/4" pilot
polished and durable black powder coated (polished fins shaft and 3/4" ball/ball
and logo) finishes. bearing. Dimension from
block surface to hub: 5.80"
Part No. Description
Black Powder-Coated Finish
EDE41153 Small Oval Air Cleaner for 4-Barrel Applications EDE8882*
EDE41173 Round Air Cleaner for 4-Barrel Applications Short-style pump is
Satin Finish ideal for street cars with
EDE41179 Round Air Cleaner for 4-Barrel Applications aftermarket serpentine
belt pulleys. Includes 5/8"
Victor Series Air Cleaners pilot shaft and heavy-duty
Air cleaners feature die-cast 3/4" ball/ball bearing.
aluminum, black powder-coated lids Dimension from block surface to hub: 5-5/8"
with a finely textured surface. Air
cleaners work with all popular 5-1/8" GM/LS Water Pump
carburetors or 4-barrel throttle bodies.
A knock-out in the base accepts an adapter EDE8896*
for crankcase ventilation. Two-piece, as-cast
Part No. Description finished pump fits
Oval Air Cleaner, 1997-07 Gen III and IV LS
EDE42203
11-7/8" x 8-1/4" with 2.4" Element, 3-3/4" Total Height engines with two-piece
thermostats and has
Aluminum Water Pumps a 3/4" ball/ball bearing
shaft. Dimension from block surface to hub is 6". A
Small Block Chevy, replacement cartridge (EDE8897) is available separately.
Standard Rotation Pulley EDE8898 is also available for pump.
EDE8810*
EDE8820 (Polished) Big Block Chevy, Standard Rotation
Short-style pump fits all 1955-68 EDE8850*
small block Chevy passenger cars, Fits all 1965-68 big block
1969-70 350 cu. in. Corvettes, Chevy passenger cars, 1966-72
and 1955-72 light duty trucks. Has trucks, and 1969-70 Corvettes.
5/8" pilot shaft and 3/4" ball/roller Has 5/8" pilot shaft and 3/4"
bearing. Dimension from block EDE8810 ball/roller bearing. Dimension
surface to hub: 5-5/8" from block surface to hub:
5-3/4"
EDE8811*, EDE8821 (Polished)
Long-style pump fits all 1969- EDE8851*
87 small block Chevy or 90°V6 Long-style pump fits 1969-87
passenger cars and 1973-86 light- big blocks and some 1988-91
duty trucks. Does not fit Corvettes heavy duty trucks with Mark IV
(use EDE8810 or EDE8812) or late engines. Does not fit Corvettes
model vehicles with serpentine EDE8821 or trucks over 1 ton. Includes
accessory drive belts (use EDE8881). Has heavy-duty 3/4" 5/8" pilot shaft and 3/4" ball/ball
ball/roller bearing and 5/8" pilot shaft. Dimension from bearing. Dimension from block
block surface to hub: 6-15/16" surface to hub: 7-5/16"

EDE8812* EDE8852*
Short-style pump fits all 1971-82 Short-style pump fits all 1971-74
small block Corvettes and has big block Corvettes. Comes
5/8" pilot shaft with heavy- with 3/4" pilot shaft and heavy-
duty 3/4" ball/roller bearing. duty 3/4" ball/ball bearing.
Dimension from block surface Dimension from block surface
to hub: 5-13/16" to hub: 5-3/4"
* As cast natural stain finish.
* As-cast natural satin finish.

2023 - 2024 HOT ROD AND EARLY MUSCLE 183

Big Block Chevy, Reverse Rotation Ford 5.0L Reverse Rotation
EDE8854* EDE8840* (1986-93),
Ideal for street cars with EDE8045* (1993-97)
aftermarket serpentine belt Fits 5.0L V8s using a
pulleys. Includes heavy- serpentine accessory
duty 3/4" ball/ball bearing. drive belt. Reverse
Dimension from block rotation; not for early
surface to hub: 5-3/4" model 289-302 V8s. Has
heavy-duty 3/4" ball/roller
bearing. Dimension from
Chevy 348-409 block surface to hub:
EDE8858* 5-3/4".
Fits 1958-65 348/409
engines and has a 5/8" 429/460 Ford
shaft that relies on a EDE8866*
3/4" ball/ball bearing Left-hand inlet and no
for smooth, trouble- backing plate. Accepts Ford
free operation. The backing plate C8SZ-8508A.
distance from the Fits all 1970-92 429/460 V8s
block surface to the hub is 5-1/2'. in passenger cars, trucks,
vans, and motor homes. Has
heavy-duty 3/4" ball/roller
Big Block Chrysler bearing. Dimension from
EDE8814* block surface to hub is 5-1/2".
* As-cast natural satin finish.
Maximum cooling and performance
for 361-440 engines, water pump is
engineered to directly replace the stock Ford “FE”
pump in the factory cast-iron housing, EDE8805*
or work with the Mopar Performance Fits all 1965-76 Ford
aluminum housing. Includes 5/8" pilot shaft. “FE” V8s. Comes with
heavy-duty 3/4" ball/ball
bearing. Dimension from
Small Block Ford block surface to hub:
EDE8841* 7.56" with 5/8" pilot shaft.
Right-hand inlet with back
plate. Dimension from Pontiac
casting to hub: 5.42". Fits EDE8856*
1965-68 289, 1968-69 302, Fits all 1969-79 389-455 cu. in. with
1969 351W with 5/8" shaft. 11-bolt front timing cover with
back plate. Has 3/4" ball/ball
bearing. Dimension from block
surface to hub: 4-1/2".
EDE8843*
Left-hand inlet with back plate. * As-cast natural satin finish.
Dimension from casting to
hub: 5.70" Fits 1970-78 302
and 1970-87 351-W with 5/8"
shaft.

EDE8844*
Left-hand inlet with no
back plate. Dimension from
casting to hub is 5.71". Fits
1970-79 351-C and 351-
M/400 with 5/8" pilot shaft.
*As cast natural stain finish.

184 2023 - 2024 HOT ROD AND EARLY MUSCLE

Max Fire® Ignition Spark Plug Wire Sets
Max Fire® Ultra Spark® wires are designed with extremely high EMI/RFI
suppression along with very low resistance. Manufactured with 8.5mm,
silicone jacket, kevlar core wire available in two levels, Ultra Spark® 500 and
Ultra Spark® 50, both offering custom fit applications as well as universal
kits. The Ultra Spark® 500 is a good quality OE replacement wire featuring 500
ohms resistance per foot and stainless steel terminals. Designed for high-
performance engines, Ultra Spark® 50 features 50 ohms per foot resistance
and stainless steel terminals.
EDE22712
Part No. Description
Ultra Spark® 50 Custom Fit Wires
EDE22712 Small Block Chevrolet, 1974-79 with HEI 90° Boots, Red
EDE22713 Small Block Chevrolet, 1980 with HEI 90° Boots, Red
EDE22714 Small Block Ford, 1983-95, Red
Ultra Spark® 50 Universal Sets
EDE22711 8 Cylinder HEI and Standard Ignition, 90° Boots, Red
Ultra Spark® 500 Custom Fit Wires
EDE22704 Small Block Ford, 1983-95, Black
EDE22703 Small Block Chevrolet, 1980 with HEI 90° Boots, Black
EDE22702 Small Block Chevrolet, 1974-79 with HEI 90° Boots, Black
Ultra Spark® 500 Universal Sets
EDE22700 8 Cylinder HEI and Standard Ignition, Straight Boots, Black

Indicate color G (Black) or R (Red) when ordering. Example: ENE3-3156R for Red

LS Engine Conversion Mounts 1966-73 Mustang Engine

Bolt an LS-Series GM and Transmission Mount Set
engine into an earlier
small block chassis ENE4-1137G
with HYPER-FLEX Durable yet more compliant
polyurethane than solid mounts, the
performance components will help prevent
motor mounts. drivetrain damage and stabilize
The set includes high-output powerplants.
two mounts, two Zinc-plated metal components
adapters, and ensure longevity.
hardware. Components are chrome or zinc-plated and
the nuts are welded to the plates for easy installation.
Part No. Description GM-Style Urethane
ENE3-1148G LS1 Engine Conversion Mounts (Short-Wide) Zinc Transmission Mount
ENE3-1150G LS1 Engine Conversion Mounts (Tall-Narrow) Zinc
Part No. Description
Black Transmission
Replacement Early Style Chevy ENE3-1108G
Mount
Motor Mounts ENE3-1108R
Red Transmission
Mount
Unique urethane motor mounts with a
safety interlock to control horsepower
are offered in chrome or zinc-plated
metal with choice of black or red
urethane. Fit 1958-72 Chevy V8. 1979-95 Ford-Style Urethane
Part No. Description Transmission Mount
ENE3-1114G
ENE3-1114R
Motor Mounts, Black, Plain
Motor Mounts, Red, Plain
ENE4-1104G
ENE3-1115G Motor Mounts, Black, Chrome
ENE3-1115R Motor Mounts, Red, Chrome

2023 - 2024 HOT ROD AND EARLY MUSCLE 185

Indicate color G (Black) or R (Red) when ordering. Example: ENE3-3156R for Red

Greaseable Sway Bar Bushing Sets

Mustang II Control Arm Bushings Bushings have grease
fittings and a unique
ENE4-3130G channel design which
diverts grease to all
Mustang II inner surfaces, virtually
eliminating squeaking.
Rack Mount Bushing Use the dimensional
ENE4-10101G drawings to determine
the proper size for each
Mustang II application. The bolt slot dimensions were designed for
10mm or 3/8" diameter mounting bolts. Choose the sway
Strut Rod Bushings bar bracket size that most closely matches existing bar.
ENE4-7113G
Bar Diameter “A” Greaseable Set
Mustang II Tie Rod Boots 11/16"/17.5mm
3/4"/19mm
ENE9-5155G
ENE9-5156G
Part No. Description 13/16"/20.5mm ENE9-5157G
ENE9-13101G Black Mustang II Tie Rod Boots, Pair 7/8"/22mm ENE9-5158G
ENE9-13101R Red Mustang II Tie Rod Boots, Pair 15/16"/24mm ENE9-5160G
1"/25mm ENE9-5161G
Complete End Link Kits 1-1/16"/27mm ENE9-5162G
The set includes bushings, zinc-plated 3/8" grade 5 bolts, 1-1/8"/28.5mm ENE9-5164G
1-1/4"/31.5mm ENE9-5165G
“nylock” nuts and heavy gauge washers.
To Determine Fit: Vehicle must be on level ground (not
jacked up) with wheels supporting it. Make sure stabilizer
bar and eyelet (B) are parallel to control arm (C). Many Non-Greaseable Type
times they are not. You may be required to use a slightly
longer or shorter sleeve length than the original. Measure
Sway Bar Bushing Sets
sleeve length (A) and compare to the chart to find the Economical HYPER-FLEX™ bushings with matching
correct set. heavy gauge brackets deliver maximum performance for
a vehicle’s sway bar system. Use the dimension drawings
“A” Length Set Number to determine the proper size for application. The bolt
1" ENE9-8122G
slot dimensions fit 10mm or 3/8" diameter mounting
1-5/8" ENE9-8120G
2" ENE9-8123G
bolts. Choose the sway bar bracket size that most closely
2-3/8" ENE9-8125G matches existing bar.
2-5/8" ENE9-8117G
2-7/8" ENE9-8118G
3-3/8" ENE9-8119G
3-9/16" ENE9-8124G
4-1/2" ENE9-8121G

1960-72 Chevy
C-10 Truck
Rear Tracking Arm Drawing 1 Drawing 2
Bushing Set Drawing 1 Type Drawing 2 Type
Bar Diameter “A” Non-Greaseable Non-Greaseable
ENE3-7104G 5/8"/16mm — ENE9-5104G
3/4"/19mm ENE9-5123G ENE9-5106G
7/8"/22mm ENE9-5126G ENE9-5108G
15/16"/24mm ENE9-5128G ENE9-5109G
1"/25mm ENE9-5129G ENE9-5110G
1-1/16"/27mm — ENE9-5111G
1-1/8"/28.5mm — ENE9-5112G
1-1/4"/31.5mm — ENE9-5113G
1 5/16"/33mm — ENE9-5114G

186 2023 - 2024 HOT ROD AND EARLY MUSCLE

Indicate color G (Black) or R (Red) when ordering. Example: ENE3-3156R for Red
Front End Rear End Rear Leaf Front Strut Front Sway
Control Arm Control Arm Spring Body Rod Bushing Bar Frame Front Tie Rod
Year Bushing Set Bushing Set Bushing Set Mount Set Set Bushings End Links Boots
Buick Regal (RWD), Grand National
1982-87 ENE3-3156 ENE3-3132 — ENE3-4141 — — — ENE9-13101 72
1978-81 ENE3-3156 ENE3-3132 — — — — — ENE9-13101 72
1974-77 ENE3-3105 ENE3-3132 — — — — ENE9-8117 ENE9-13101 72
Chevrolet Full Size - Impala
1991-96 — ENE3-3159 2 — — — — ENE9-8123 ENE9-13101 72
1965-70 ENE3-3150 73 ENE3-3149 2, 79, 86 — ENE3-4138 74 ENE3-7109 — ENE9-8120 ENE9-13101 72
Chevrolet Nova, Chevy II
ENE3-2103 10
1968-74 — — ENE3-4142 — — ENE9-8117 ENE9-13101 72
ENE3-2101 9
1962-67 ENE3-3160 — ENE3-2122 9 — ENE3-7105 — ENE9-8117 ENE9-13101 72
Front End Rear End Rear Leaf Front Sway
Control Arm Control Arm Spring Body Transmission Bar Frame Front Tie Rod
Year Bushing Set Bushing Set Bushing Set Mount Set Mount Bushings End Links Boots
Chevrolet Camaro
1982-92 ENE3-3157 8 — — — ENE3-1108 103 34mm ENE3-5131 ENE9-8117 ENE9-13101 72
1980-81 ENE3-3106 — ENE3-2103 ENE3-4142 ENE3-1108 — ENE9-8117 ENE9-13101 72
1975-79 ENE3-3105 — ENE3-2103 ENE3-4142 ENE3-1108 — ENE9-8117 ENE9-13101 72
1973-74 ENE3-3103 5 — ENE3-2103 ENE3-4142 ENE3-1108 — ENE9-8117 ENE9-13101 72
1970-72 ENE3-3102 — ENE3-2103 ENE3-4142 ENE3-1108 — ENE9-8117 ENE9-13101 72
ENE3-2101 9
1967-69 — — ENE3-4142 ENE3-1108 — ENE9-8117 ENE9-13101 72
ENE3-2102 10
Chevrolet Chevelle, Monte Carlo, Malibu
1978-88 ENE3-3156 ENE3-3132 — ENE3-4141 ENE3-1108 — ENE9-8119 ENE9-13101 72
1968-72 ENE3-3172 67 ENE3-3132 — ENE3-4115 46 ENE3-1108 — ENE9-8118 ENE9-13101 72
Front End Rear End Rear Leaf Rear Front Sway
Control Arm Control Arm Spring Body Strut Rod Bar Frame Front Tie Rod
Year Bushing Set Bushing Set Bushing Set Mount Set Bushing Set Bushings End Links Boots
Chevrolet Corvette
1996 ENE3-3142 — — — — — — ENE9-13101 72
1988-95 ENE3-3142 ENE3-3145 — — — — — ENE9-13101 72
1984-87 ENE3-3142 ENE3-3145 — — — — — ENE9-13101 72
Spring Cushions
1975-82 ENE3-3108 ENE3-3191 ENE3-4126 — — ENE9-8120 ENE9-13101 72
ENE3-2104
Spring Cushions
1973-74 ENE3-3108 ENE3-3191 ENE3-4126 — — ENE9-8120 ENE9-13101 72
ENE3-2104
Spring Cushions
1970-72 ENE3-3108 ENE3-3191 — — — ENE9-8120 ENE9-13101 72
ENE3-2104
Chevrolet 1/2 Ton C-10/C1500 Pickup 2WD
1967-72 — ENE3-3123 — ENE3-4108 — 1-1/16" ENE3-5175 — ENE9-13119
Rear Leaf Front Strut Front Sway
Transmission Spring Body Rod Bushing Bar Frame Front Ball Joint Tie Rod
Year Mount Bushing Set Mount Set Set Bushings End Links Boot Set Boots
Dodge/Plymouth A-Body: Dart, Demon, Duster
1973-76 ENE5-1112 ENE5-2106 81 — ENE5-7109 7/8" ENE5-5113 ENE9-8120 ENE5-13102 ENE9-13101 72
Dodge/Plymouth B-Body: Charger, GTX, Roadrunner, Super Bee
1973-79 ENE5-1112 — ENE5-4111 57 ENE5-7109 30 — — ENE5-13102 ENE9-13101 72
ENE5-2101 25
1970-72 ENE5-1112 — ENE5-7109 — ENE9-8120 ENE5-13102 ENE9-13101 72
ENE5-2104 26
Dodge/Plymouth E-Body: Barracuda and Challenger
ENE5-2101 25
1970-74 ENE5-1112 — — — ENE9-8120 ENE5-13102 ENE9-13101 72
ENE5-2104 26

Footnotes Footnotes Footnotes

2 Must reuse existing outer metal shells. 30 1973-74 only. 81 All with 2" main eye and 5/8" bolt.
5 1-5/8" O.D. front lower. 46 1970-72 Monte Carlo use ENE3-4134. 86 1969-70 with V8 use ENE3-3151.
6 With all round bushings. 57 Must reuse all metal parts. V6 engine requires crossmember modi-
103
8 Lowers only. 67 With oval rear lower bushing. fication.
9 Mono-leaf spring. 72 Two boots per package.
10 Multi-leaf spring. 73 Lowers must reuse all metal parts.
25 Except 426 and 440 models. 74 2 door hard top.
26 426 and 440 models. 79 With two upper control arms.

2023 - 2024 HOT ROD AND EARLY MUSCLE 187

Indicate color G (Black) or R (Red) when ordering. Example: ENE3-3156R for Red
Front End Rear End Rear Leaf Front Strut Front Sway
Control Arm Control Arm Spring Body Rod Bushing Bar Frame Front Tie Rod
Year Bushing Set Bushing Set Bushing Set Mount Set Set Bushings End Links Boots
Ford Fairlane, Grand Torino, Torino, Elite, Ranchero
1967-71 ENE4-3102 2,18 — — — ENE4-7112 — ENE9-8120 ENE9-13101 72
Ford Full Size, Galaxie
1972-78 — — — — ENE4-7117 — ENE9-8118 ENE9-13101 72

Front End Rear End Front/Rear Front

Control Arm Control Arm Motor Transmission Sway Bar Frame Front Tie Rod Ball Joint
Year Bushing Set Bushing Set Mount Mount Bushings End Links Boots Boot Set
Ford Mustang
ENE4-3114 2, 6
1983-93 ENE4-3132 ENE4-1122 ENE4-1104 — ENE9-8121 ENE9-13101 72 ENE9-13130
ENE4-3115 2, 1
Mercury Capri
ENE4-3114 2, 6
1979-86 ENE4-3132 14 — — — ENE9-8121 — ENE9-13101 72
ENE4-3115 2
Oldsmobile Cutlass, 442
1978-88 ENE3-3156 ENE3-3132 — ENE3-4141 — ENE9-8119 — ENE9-13101 72
1974-77 ENE3-3105 ENE3-3132 — — — — — ENE9-13101 72

Front End Rear End Rear Leaf Front Sway

Control Arm Control Arm Spring Body Transmission Bar Frame Front Tie Rod
Year Bushing Set Bushing Set Bushing Set Mount Set Mount Bushings End Links Boots
Pontiac Firebird and Trans Am
34mm
1982-92 ENE3-3157 — — — ENE3-1108 ENE9-8117 ENE9-13101 72
ENE3-5131
1980-81 ENE3-3106 — ENE3-2103 ENE3-4144 ENE3-1108 — ENE9-8117 ENE9-13101 72
1970-72 ENE3-3102 — ENE3-2103 ENE3-4142 ENE3-1108 — ENE9-8117 ENE9-13101 72
ENE3-2101 9
1967-69 ENE3-3101 — ENE3-4142 ENE3-1108 — ENE9-8117 ENE9-13101 72
ENE3-2102 10
Pontiac LeMans, GTO, Tempest, Grand Am to 1981, Grand Prix 1982-88
1982-88 ENE3-3156 71 ENE3-3132 71 — ENE3-4141 ENE3-1108 — ENE9-8117 71 ENE9-13101 72
1978-81 ENE3-3156 ENE3-3132 — — ENE3-1108 — ENE9-8119 ENE9-13101 72
1967-72 ENE3-3172 67 ENE3-3132 — — ENE3-1108 — ENE9-8118 ENE9-13101 72

Footnotes Footnotes
1 With oval front bushing. 14 Except heavy-duty suspension.
2 Must reuse existing outer metal shells. 18 1-7/16" O.D. lower.
6 With all round bushings. 67 With oval rear lower bushing.
9 Mono leaf spring. 71 Grand Prix only.
10 Multi leaf spring. 72 Two boots per package.

ECO ATF
ECO ATF is a fuel-efficient, low-viscosity transmission fluid that meets the requirements of many
American-made vehicles. Manufactured with premium base stocks, low-molecular weight boosters,
and selected additives which provide high resistance to mechanical wear, outstanding friction
characteristics, and anti-shudder protection. Compatible with transmissions requiring GM Dexron III
and Ford Mercon. Not compatible with CVT’s and Ford Type F requirements.
Part No. Description
ENO3103-300 One-Quart Bottle
ENO3103-301 Case of (12) One-Quart Bottles

188 2023 - 2024 HOT ROD AND EARLY MUSCLE

 Fully Synthetic Motor Oil
Manufactured from 100% synthetic
base oil, providing superior thermal
Gear Oil • GL-5 75W-90 and resistance to oxidation and
Formulated for use in manual breakdown. These oils flow better at
transmissions and non-limited cold temperatures, reducing wear
differentials including heavy-duty on critical engine parts at start up.
manual transmissions, axles, and final Formulated with a blend of additives
drives which require API GL-5 and 75W- that help improve fuel mileage by
90 viscosity. keeping the engine clean, protecting
Part No. Description vital engine parts from wear and
ENO3092-300 GL-5, 75W90 One-Quart Bottle reducing internal friction. ENEOS
ENO3092-302
GL-5, 75W90, Case of (6) Fully Synthetic Motor Oils exceed the
One-Quart Bottles latest API Service SN, ILSAC GF-5
classifications.
Part No. Description
0W-16
ENO3251-300 One-Quart Bottle
ENO3251-301 Case of (12) One-Quart Bottles
ENO3251-400 Six Gallons
Street and Track Racing Oil Dexos 1, 0W-20
ENO3701-300 One-Quart Bottle
This fully synthetic Street and Track
ENO3701-301 Case of (12) One-Quart Bottles
racing oil is formulated from high- ENO3701-320 Five-Quart Jug
quality base stock with MoDTC and ZDDP ENO3701-323 Case of (4) Five-Quart Jugs
additives to protect engines during cold ENO3701-400 0W-20, Six Gallons
weather start-ups to extreme race track Dexos 1, 5W-30
temperatures. Maximum horsepower, oil ENO3703-300 One-Quart Bottle
film retention, and anti-wear protection ENO3703-301 Case of (12) One-Quart Bottles
make this oil suitable for every type of ENO3703-320 Five-Quart Jug
motorsport event, including stock cars, ENO3703-323 Case of (4) Five-Quart Jugs
autocross, drifting, and drag cars. Meet ENO3703-400 Six Gallons
5W-30
API specifications.
ENO3241-300 One-Quart Bottle
Part No. Description ENO3241-301 Case of (12) One-Quart Bottles
ENO3901-300 0W-20, API Service SN/RC, One-Quart Bottle ENO3241-320 Five-Quart Jug
ENO3901-302 0W-20, API Service SN/RC, Case of (6) One-Quart Bottles ENO3241-323 Case of (4) Five-Quart Jugs
ENO3902-300 0W-50, API Service SN, One-Quart Bottle ENO3241-400 5W-20, Six Gallons
ENO3902-302 0W-50, API Service SN, Case of (6) One-Quart Bottles 5W-40
ENO3704-300 One-Quart Bottle
ENO3704-301 Case of (12) One-Quart Bottles
ENO3704-320 Five-Quart Jug

Traditional hot rods more or less evolved from “rat rods” and, like
these earlier rods, they often use traditional, vintage V8 engines. Early
Cadillac, Olds, Ford, and Chrysler (as well as DeSoto and Dodge Red
Ram) hemis are all prominently displayed in the engine compartments
of these machines. These engines can still be found quite readily,
but most of their internal replacement parts dropped off the radar of
parts catalogs years ago. Enter Egge Machine Company. The company
offers American-made replacements for pistons, stainless steel
valves, bearings, rings, and even complete rebuild kits for almost
every nostalgic V8. They also have vintage suspension components.
We are an official Egge dealer and we’re set up to special order all of
Egge’s products. Don’t let “unavailable” obsolete parts put a stop to
that next project.

Call us and we’ll call Egge.

2023 - 2024 HOT ROD AND EARLY MUSCLE 189
Gear & Chain Clear Grease G-100 Lithium Grease
ERPP018 High-speed, lithium-complex grease provides
High-quality, soluble grease is designed to protection to wheel bearings and other
form a protective barrier against moisture lubrication requirements. Sold in 14.5-ounce
and extreme temperatures. Lubricant is cartridges or 16-ounce tub.
recommended for all types of chains and Part No. Description
gears, helps reduce wear, and prevents rust ERPP008 14.5-oz. Cartridge
from forming on exposed surfaces. Sold in a ERPP008T 16-oz. Tub
13- ounce aerosol can.

G-200 Synthetic Grease

High-temperature, low-speed
Antifriction Engine Treatment synthetic grease is well suited to
severe applications including disc
Additive has been tested and proven
brake wheel bearings, universal
for over 20 years in gasoline and diesel
joints, fan hubs, fifth wheels, etc.
engines, compressors, power tools,
Sold in a 14.5- ounce cartridge or 16-ounce tub.
heavy equipment, etc. Product treats and
conditions the metal, not the lubricant, Part No. Description
ERPP006 14.5-oz. Cartridge
and when added reduces friction and wear
ERPP006T 16-oz. Tub
between metal components.
Part No. Description
ERPP001 Antifriction Engine Treatment, 5-oz. Bottle
ERPP007 Antifriction Engine Treatment, 8-oz. Bottle
ERPP002 Antifriction Engine Treatment, 16-oz. Bottle
ERPP003 Antifriction Engine Treatment, 1-Gallon Bottle Octane Booster
ERPP033S
Fuel additive is a highly concentrated MMT lead
substitute that also increases the RON octane
rating of gasoline. Product helps eliminate
harmful pre-ignition caused by low octane
Complete Fuel System Cleaner gasoline. Sold in a 16-ounce bottle.
ERPP032
Highly concentrated cleaner removes harmful
fuel system deposits, reduces emissions,
and restores performance. Sold in a 16-ounce
bottle.
Multipurpose Penetrating Lube
ERPP010
Lubricant features the metal conditioning
Citrus Engine Degreaser Plus technology of Energy Release in a
ERPP019 convenient aerosol can. Product guards
Versatile cleaner/degreaser features a citrus- against rust on exposed metal surfaces,
based formula and is safe to use on auto parts, frees bolts and fittings frozen by rust or
tools, machinery, etc. Suitable for use as a corrosion. Sold in a 12-ounce aerosol can.
tough engine degreaser or gentle, all-purpose
cleaner. Rinses completely with water and
leaves no residue. Sold in an 18- ounce aerosol
can. Cutting and Tapping Fluid
ERPP011
Motor Flush Superior cutting formula incorporates
ERPP023 Energy Release to help tools cut through
Engine oil additive cleans and conditions the hardest materials without distortion or
internal engine components, dissolving and tool wear. Fluid reduces heat and provides
eliminating sludge. Product cleans valves, superior protection to cutters, drills, taps,
piston rings, etc. for improved horsepower reamers, and punches. Sold in a 13.75-ounce
and fuel economy while also protecting and aerosol can.
conditioning metal surfaces for reduced
friction. Sold in 15-ounce can.

190 2023 - 2024 HOT ROD AND EARLY MUSCLE

Billet X-treme RT Series Carburetors
Carburetors Designed for exceptional
The all-out performance street performance, the
Billet X-treme Series RT Series Carburetors
carburetors are are perfect for classic
constructed with CNC- muscle cars or street
machined main bodies, rods. Manufactured with
2 circuit billet metering vacuum secondaries and
blocks, center-hung electric chokes, these
floats, and 4 corner idle adjustment. These features pressure forged aluminum
provide a carburetor that is extremely tunable and will carburetors incorporate
work with all common fuels including methanol and the latest technology in air/
ethanol. All Billet X-treme carburetors are manufactured fuel calibrations for great out-of-the box performance.
without chokes and include 2 port fuel bowls, allowing Available in 600, 650, and 750 CFM versions with a factory
installation on virtually any race vehicle. Available with polished finish.
either vacuum or mechanical-operated secondaries. Part No. Description
Vacuum Secondaries
Vacuum Mechanical
Secondary Secondary 600 CFM Square-Flange RT Carb, Electric Choke, Side-Hung
Description FSC40600
Float, Single-Feed Fuel Inlet
Part Part
650 CFM Square-Flange RT Carb, Electric Choke, Side-Hung
750 CFM Carb, Titanium FSC40650
Float, Single-Feed Fuel Inlet
Main / Red Metering Blocks/
FSC41750BB FSC41750BB-1 750 CFM Square-Flange RT Carb, Electric Choke, Center-
Black Throttle Body, 2-Port X FSC41750
Hung Float, Four Corner Idle, Dual-Feed Fuel Inlet
Fuel Bowl
850 CFM Carb, Black Main /Red
Metering Blocks/Black Throttle - FSC41850BB-3
Body, 3-Port Viper Fuel Bowl
RT Plus
Carburetors
Ideal for the weekend
Adjustable Fuel Log warrior, featuring
black electroplated
FSC41650D-3 pressure-forged
Attractively metering blocks and FSC41600P
black anodized bases.
fuel log features
Part Description
an adjustable FSC41600P 600 CFM, Electric Choke, Vacuum Secondary
design to work FSC41600P-1 600 CFM, Manual Choke, Vacuum Secondary
with a variety of popular 4bbl carburetors. Fuel log FSC41600P-3 600 CFM, Manual Choke, Mechanical Secondary
includes a -10AN male inlet, dual 7/8”-20 male outlets, FSC41650P-3 650 CFM, Manual Choke, Mechanical Secondary
and a 3/8” NPT port for a fuel pressure gauge.
RT-X
Carburetors
Affordably priced, RT-X
caburetors are ideal
for both road and track
applications. This fully
tunable carburetor
features red billet
metering blocks and a
black billet base.
Part Description
FSC42750XB 750 CFM, Mechanical Secondary, Black

2023 - 2024 HOT ROD AND EARLY MUSCLE 191

Custom Pop-Up Tents
The ultimate method to provide shade and shelter. Canopies
combine durable, lightweight aluminum frames with attractive
black, fire-retardant and weather-resistant top covers. User-
friendly design allows quick, easy set-up with telescopic legs that
snap into place with the click of a button. Optional wheeled canopy
bag for easier transport and storage may be purchased separately.
Canopies may also be ordered with top covers that feature custom
graphics. Additional available accessories include side skirts,
back, and side walls, as well as custom flags.
Part No. Description Weight Dimensions
FAC30001 10' x 10' 52 lbs. 120"W x 120"D x 137"H
FAC30011 10' x 15' 58 lbs. 180" W x 120"D x 137"H
FAC30021 10' x 20' 68 lbs. 240" W x 120"D x 137"H

Wall Kits for Custom Pop-Up Tents

Designed to keep out dust, dirt, bright sunlight, and even prying
eyes, Wall Kit provides full enclosure of a Factory Canopy.
Convenient center zipper provides access. Black only.
Part No. Description
FAC42001-KIT Wall Kit for 10' x 20' Canopy

Replacement/Accessory Components
Part No. Description
FAC10001 10' x 10' Top
FAC10011 10' x 15' Top
FAC10021 10' x 20' Top
FAC20001 10' x 10' Frame
FAC20011 10' x 15' Frame FAC42001-KIT
FAC20021 10' x 20' Frame

FAST EZ-EF
FST30226-06KIT
FAST EZ-EFI makes it easy to
convert from carburetor to
EFI. Get faster starts, quicker
throttle response, and better
fuel mileage. Designed for easy
installation, kits include all the
necessary components for a
FAST install.

192 2023 - 2024 HOT ROD AND EARLY MUSCLE

Digital Air/Fuel Meter Precision Fuel Injectors
End guessing games to FST303608
determine carburetor Injectors have a wide spray angle
jetting or EFI profiles. for exceptional fuel atomization.
Dual sensor monitors Modern magnetics assure
air/fuel ratios on both accurate injector opening rates
engine banks. A lighted and improved throttle response.
display screen plays back Sold in sets of eight. 36 lb./hr.
recorded information
without downloading to a computer. Wideband oxygen
sensors may be read individually or averaged together. EFI Components
Outputs are for external data loggers and digital gauges. F.A.S.T. offers a wide variety
A narrowband simulator works with the engine computer. of components for the EFI
Air/Fuel Meters include oxygen sensor, 12' cable, and enthusiast.
instructions. Optional RPM input module monitors RPM
Part No. Description
simultaneously with air/fuel ratios. FST307003 CTS (Coolant Temperature Sensor)
Part No. Description FST307004 ATS (Air Temperature Sensor)
FST170401 Single Sensor Air/Fuel Meter FST307005 Ford TPS (Throttle Position Sensor)
FST170402 Dual Sensor Air/Fuel Meter FST307007 1-Bar MAP (Manifold Absolute Pressure) Sensor
Accessories FST307009 3-Bar MAP (Manifold Absolute Pressure) Sensor
FST170408 Replacement Wideband Oxygen Sensor FST307014 GM TPI Style IAC (Idle Air Control) Motor
FST307017 Fuel Injector Bungs, 8-Pack
EZ-EFI
Based on a 4150 LSX 102mm
throttle body the Intake Manifold
system is self- A polymer intake manifold
tuning, requiring for rectangular port GM
no laptop L92/LS3/LS7 engines
computer. EZ-EFI developed by FAST and
works with the RHS to produce gains
stock carburetor of 30+ horsepower and
linkage on any 25+ lb./ft. of torque at
engine up to 550 the flywheel over a stock
horsepower. LS intake. The three-
Base system piece modular design
includes an ECU, allows the manifold to be
wideband oxygen easily disassembled for porting. The runners are longer
sensor, wiring and less restrictive and can be removed individually for
harness, tach and modification.
power adapter,
Part No. Description
temperature sensor and fitting, and the throttle body. FST146102B L92/LS3 Car Rectangle Port
Master Kit includes base kit, fuel pump, and 25' hose and FST146202B LS7 Car Raised Rectangle Port
fitting. Improve mileage, performance, and cold weather
starts.
Part No. Description
FST30226-06KIT EZ EFI Base Kit

Fuel Rails and

Injector Bungs
Extruded aluminum rails are
suitable for engines
with up to 2,500
horsepower.
Bungs may be
fabricated for
use in intake
manifolds.
Part No. Description
FST30700218B Fuel Rail, 18"
FST30700224B Fuel Rail, 24"
FST30700236B Fuel Rail, 36"
FST307017 Injector Adapter Bungs, 8-Pack

2023 - 2024 HOT ROD AND EARLY MUSCLE 193

Go EFI 4 Self-Tuning Fuel Injection Kit Easy Street 600HP System
This system is suitable for FIT30005
engines from 260 HP up The new Easy Street 600HP
to 600HP. The fully self- system rounds out FiTech’s
contained unit mounts street line of fuel injection
to any 4-barrel intake solutions for many popular GM,
manifold. Other features Ford, and Mopar applications
include a handheld using a 4-barrel intake manifold.
controller for quick and easy initial setup, a built-in “Bolt-n-go” technology with pre-programmed settings
fuel regulator, a throttle body-mounted ECU, and spark provides great performance right out of the box, with
control without the need for a special distributor. The minimal input required. The easy tach input reads the
kit includes four Hi-Flow 600 HP injectors, die-cast signal from COIL, HEI, CDI, and other ignition brands.
throttle body, internal MAP sensor, TPS, coolant sensor, Designed for naturally aspirated engines generating 200-
a handheld controller, fuel regulator, O2 sensor and bung, 600HP.
-6AN fuel inlet fitting, and gasket kit.
Part No. Description
FIT30001 Basic Kit, Bright Tumble Finish
Go Street EFI + In-Line
FIT30002 Basic Kit, Matte Black Finish Fuel Pump Master Kit
FIT31003
Go EFI 4-600 HP Kit For a simple, ready-to-
FIT30004 run fuel injection system
This power adder system designed to get the best
is designed for enthusiasts performance and economy
looking to add more out of a street or mild performance engine, the Go Street
horsepower from the use EFI with in-line fuel pump is hard to beat. Designed
of existing turbochargers, to fit most popular GM, Ford, and Mopar applications
superchargers, single-stage nitrous kits, as well as making 150-400HP with a 4-barrel intake manifold, the
aspirated engines. The system includes four Hi-Flow 600 Go Street throttle body includes an EFI-grade 255 lph
HP injectors, die-cast throttle body, internal MAP sensor, inline external fuel pump suitable for up to 600HP. Kit also
TPS, coolant sensor, Pro Laptop software, an advanced includes 40 ft. of EFI grade fuel hose, a 60-micron billet
handheld tuner, fan controllers, voltage fuel pump pre-filter and a 30-micron billet post filter.
control, O2 sensor and bung, -6AN fuel inlet fitting, and
gasket kit. Matte black finish. Go EFI 2-Barrel 400HP System
FIT39001
Go Street EFI - 400 HP System The new Go EFI 2-barrel
FIT30003 system is designed for 4, 6,
The Go Street EFI is a ready-to-run and most 8-cylinder vehicles.
system that strays away from the Eliminates cold start issues,
programmable features and sticks hesitation, vapor lock,
to the basic functions necessary flooding, and other carburetor
to get the best performance and caused problems. Complete
economy out of your street and gold-colored throttle body kit
mild performance engine. FiTech with transmission control combines EFI reliability with
once again allows you to ditch that old-school looks.
old carburetor and advance into
the EFI world. Go EFI Tri-Power 600HP System
FIT39610
Remember that amazing sight of a
6-pack when you pop the hood of
a classic muscle car? Upgrade to
the reliability of EFI while keeping
that impressive look of a trio of
two-barrels. The GoEFI Tri-Power
system bolts to most 6-pack
manifolds and is compatible with
factory air intakes. The simple,
ready-to-run system features
FiTech’s self-learning technology.
Includes three high-flow
aluminum throttle bodies with gold finish, an external
ECU (computer), and a Bosch wideband O2 sensor. All
other sensors are easily sourced replacement GM-style
sensors.

194 2023 - 2024 HOT ROD AND EARLY MUSCLE

Meanstreet EFI – 800 HP Ultra Ram SBC EFI
FIT30008 FIT38301
MeanStreet 800HP 8 injector The new Ultra Ram EFI for
kit to the forefront. Never small block Chevy engines
has so much power been is a self-tuning induction
placed in one compact system designed for everyone
package. Meanstreet from the do-it-yourself hot rodder
offers an onboard ECU and to the professional EFI tuner. Includes
fuel pressure regulator everything needed to convert a carbureted crate, stock,
to bring the user simple, or race SBC to FiTech’s top-of-the-line self-learning EFI
clean wiring, and an easy technology.
install. The FiTech wideband 02 and Annular Swirl Wet
Flow technology to get the most complete atomization Throttle Return Spring
available, bringing the user more power than ever. It fits
any 4-bbl intake manifold and is the most self-contained FIT60011
and full-featured unit of this type. The ECU (computer) This kit includes a bracket
is mounted on the throttle body, which greatly simplifies that bolts to the throttle
installation. No hole in your firewall and no unsightly body and provides a throttle
harness draped across your engine. It also has a built-in return spring. Note that this
fuel pressure regulator. A hand-held controller features a kit only fits the FiTech 4bbl.
touch screen for quick and easy initial set-up. throttle bodies.

Ultimate LS Induction Systems Oxygen Sensor Bung Kit

Complete self- FIT60012
tuning induction
systems for
LS engines
designed for the 340 LPH In-Tank Fuel Pump
do-it-yourself FIT50102
hot rodder to This high-quality in-tank fuel pump is
the professional a replacement for the fuel pump that
EFI tuner. These is used in the Fuel Command Center
complete kits are (FIT40003).
available for 5.3L
LS engines up to 427 strokers and include all necessary
hardware and electronics needed for installation. 255 LPH Inline Frame Mount
Part No. Application Horsepower
FIT70001 LS1/LS2/LS6 500 HP without Transmission Control
Fuel Pump
FIT70002 LS1/LS2/LS6 500 HP with Transmission Control FIT50101
FIT70003 LS1/LS2/LS6 750 HP without Transmission Control This quality EFI fuel pump is a
FIT70004 LS1/LS2/LS6 750 HP with Transmission Control
replacement for the pump that is used in
FIT70013 LS3/LS9 750 HP without Transmission Control
FIT70014 LS3/LS9 750 HP with Transmission Control
the FIT40005 FiTech inline fuel pump kit.

Aluminum Flywheels
CNC-machined aluminum flywheel’s low moment of inertia relieves internal engine stress with no
sacrifice in durability. High-carbon alloy friction surface works with organic, Kevlar, and sintered iron
discs. Heat-treated ring gears secure with Grade 8 fasteners. Meets SFI specs.
Part No. Description
Ford
FID186501 1986-95 Mustang 5.0L, 157 RG, Includes 28.5-oz. and 50-oz. Weights
General Motors
FID198681* 1955-86 for All Models, V8, 168 RG
FID198681 1967-86 Camaro, V8, 168 RG(9)
FID198681* 1955-86 Corvette, All Engines, 168 RG
* For 383 or 400 engine. For 454 engine, must use FID624541 balance plate.

2023 - 2024 HOT ROD AND EARLY MUSCLE 195

Classic Tilt Columns Classic Series
For non-airbag applications Keyed Tilt Steering Columns
only, columns are all stainless All-new columns feature GM
steel and two-inch diameter to mechanical, high-amp ignition
match existing mounting holes. switch with accessory, on, off, and
Standard shaft in these columns is one inch O.D., DD. start positions and standard GM
Horn relay must be installed and ignition switch is not plug module. Columns have a high-
available on column. Installation kits sold separately. strength, all-steel tilt shaft with
PTFE-coated bearings and the exclusive Tru-Torque™
1967-68 GM “F” Body and 1968 “X” Body 30" x 2" locking system. The “key at 3 (won’t hit your knee)”
Floor Shift Columns positioning is possible because of the new one-piece
casting. The Classic Series columns are completely made
Part No. Description
FLAFR20006 Paintable Mill Finished Steering Column
in the USA and have a 3-year/36,000 mile warranty.
FLAFR20006SS Polished Stainless Steering Column Part No. Shaft Size Description
Floor Shift - 2" Dia. Tube
FLAFR30001BK 1" DD 33", Black
33" Muscle Car Floor Shift Tilt Key
Column with 1"- 48 Shaft Tilt Floor Shift Steering Column
FLAFR30009BK A two-inch diameter tube and
Black powder-coated finish. compact shroud add a unique
Description
and clean custom look to this
1969-74 Nova / Skylark column intended for use in hot
1969-72 Chevelle/El Camino (GM A Body) rods with floor shifters. The
1969 and 1970-78 Camaro/Firebird column has a one-inch DD shaft
and includes a stainless steel dress up kit (tilt and turn
1969-81 GM “F” Body signal levers and hazard flasher knob), GM wiring harness,
33" x 2" Floor Shift Columns and an all new turn signal-canceling cam.
Part No. Description
Part No. Description
FLAFR20005 30" Steel
FLAFR20004-69 Paintable Mill Finished Steering Column
FLAFR20005SS 30" Polished Stainless Steel
FLAFR20004-69SS Polished Stainless Steering Column
FLAFR20006 32" Steel
FLAFR20006SS 32" Stainless Steel
1964-66 GM “A” Body and 1962-67
“X” Body 30" x 2" Floor Shift Columns Direct-Fit Steering Column for 1967-68 Camaro
Part No. Description These 30" floor shift tilt
FLAFR20005 Paintable Mill Finished Steering Column steering columns feature a
FLAFR20005SS Polished Stainless Steering Column 1"DD end, and are designed as
a direct fit replacement with
Direct Tilt Steering Columns custom look. Each column
Flaming River Direct-Tilt includes a billet dress up kit
keyed steering columns are with tilt/turn signal levers
a direct-fit replacement for and hazard knob, GM wiring
factory columns. They feature (4-1/4 " connector), and an all
stainless steel construction, new canceling cam. Offered in 3 finish options.
2” tube diameter, integrated Part No. Description
hazard and turn signal switches, FLAFR21027BK
Steering Column for 1967-68 Camaro,
and ignition switch with key. Offered in black Black Powder-Coated Finish
powder-coated or paintable mill finish, with
different end and shifter options.
Part No. Application Length Shift End Finish
GM C/K 20
FLAFR30006-48BK 1973-87 Truck 48” Floor 1”-48 Black
FLAFR30006-48BK GM C/K 20 48” Column 1”-48 Black
1973-87 Truck
GM F-Body
FLAFR30015BK 33” Floor — Black
1970-81
Jeep CJ
FLAFR30019 30” Floor — Milled
1979-86
Jeep CJ
FLAFR30019BK 30” Floor — Black
1979-86

196 2023 - 2024 HOT ROD AND EARLY MUSCLE

Plug Adapter Kit Billet Steering U-Joints
FLAFR20118 Rugged billet steering U-joints are available for just about
Female plug is supplied with any steering combination. All have outside
terminals and can be used to diameter of 1-1/4".
mate any existing harness with a Box Shaft Part No.
Column
Flaming River 4-1/4" connector.
3/4" 3/4" FLAFR1700
9/16"-26 3/4" FLAFR1701
Floor Mount 9/16"-26 3/4" DD FLAFR1709DD
Aluminum billet ball and collar swiveler floor mount allows 5/8"-36 3/4" FLAFR1704
columns to be mounted at up to a 60° angle. Available for 5/8"-36 3/4" DD FLAFR1722DD
3/4"-30 3/4"DD FLAFR1733DD
1-3/4" or 2" columns.
3/4"-30 3/4" FLAFR1702
Part No. Description 3/4"-36 3/4" DD FLAFR1715DD
FLAFR20100 1-3/4" Floor Mount 3/4"-36 3/4"-36 FLAFR1711
FLAFR20101 2" Floor Mount 13/16"-36 3/4" DD FLAFR1719DD
FLAFR20101FB 1967-69 Camaro Satin 1"-48 3/4" FLAFR1705
1"-48 3/4" DD FLAFR1712DD
3/4" DD 3/4" DD FLAFR1716DD
Column Drops 3/4" DD 3/4" DD FLAFR2516DD*
Column drops are machined from billet 3/4" DD 3/4" FLAFR1706DD
3/4" DD 17mm DD FLAFR1759DD
aluminum with a smooth radius edge. This
1" DD 3/4" FLAFR1707DD
hinged sleek design is available in satin
1" DD 3/4"-36 FLAFR1714DD
or mirror finish and in 1-3/4" or 2" inside 1" DD 3/4" DD FLAFR1717DD
diameter. Add to the end of the part number: FR Pyramid 3/4" DD FLAFR1789P**
“PL” for Polished or “S” for Satin finish. * Stainless steel
Size 2" Dia. ** Specialty joints fit Flaming River Power Rack.
2-1/2" Drop FLAFR20107
3-1/2" Drop FLAFR20108
Splined Steering Shafts, 3/4"-36
Mounting Clamp Box/Column
Splined Both Ends
Length
8"
Part No.
FLAFR1870-8
Use clamp to mount column under OEM Splined Both Ends 12" FLAFR1870-12
dashes. Made from billet aluminum and Splined Both Ends 36" FLAFR1871-36
available in 1-3/4" or 2" versions.
Part No. Description
FLAFR20114-2 1-3/4" Mounting Clamp
FLAFR20114 2" Mounting Clamp
FLAFR20114K 2" OEM Key Column Satin
Double D Style
Strap Clamp Steering Shafts
Part No. Description
FLAFR20300 Stainless Steel
Clamp is compatible with 1969-up FLAFR1850SS 18" Long Double D Shaft
OEM mounts on most GM steering Polished Stainless Steel
column mounts (except 1967-68 FLAFR1850SSPL 18" Long Double D Shaft
Camaro) and includes a rubber FLAFR1851SSPL 36" Long Double D Shaft
vibration absorber. Unplated Steel
FLAFR1850 18" Long Double D Shaft
FLAFR1851 36" Long Double D Shaft
Horn Contact Kit
FLAFR20120HN Spline Size Reference Chart
Includes spring-loaded wire Configuration Applications
contact for use with steering 9/16"-26 Manual Pinto/Mustang II/Omni R/P
columns. The turn signal Manual GM 1976-Later, Manual Power Ford Box, Small GM/
canceling cam is not included. 3/4"-36 Ford, Corvette 1958-64, 1968-83 Power Mustang/Pinto/
R/P Chrysler
Corvette 1963-67, Manual 122 GM Box 1965-68,
Steering Wheel Adapter 3/4"-30
Manual 525 Saginaw 1968-Later
Tapered adapter fits both 5- and 6-bolt 1"-48 Large GM Splined Column
steering wheels and bolts directly to 13/16"-36 Chrysler, GM Power Box 800 1977-Earlier
Flaming River column. Adapter is 2-1/2" 5/8"-36 Vega 140, GM R and P 1979-Later
total height. 5/8"-36 Chrysler (Spline Pitch Is Different)
3/4"-48 Sweet Rack and Pinion, MGB
Part No. Description 17mm Corvette, Fiero
FLAFR20119TA Polished
3/4" DD Small GM/Ford
FLAFR20119TAS Satin
1" DD Large GM/Ford

2023 - 2024 HOT ROD AND EARLY MUSCLE 197

Steering Shaft Support Bearings Universal Power Rack and Pinion
Bearings provide support to extended FLAFR40022PLN
shafts and result in safer, smoother
steering systems.
Part No. Description
FLAFR1810 Support Bearing, 3/4" Zinc
FLAFR1811 Support Bearing, 3/4" Stainless Steel

Measuring 45" long with 6" of travel, this power rack

and pinion unit is dimensionally interchangeable with
Vega Manual Steering Box Mustang or Omni racks, with improved mounting
FLAFR1500 versatility. Featuring all new components, it includes
All new Vega box features stronger casting, braided stainless pressure lines and billet pillow blocks.
bolt-in capability, new Pitman arm shaft, and Hoses, pump, U-Joint, and reservoir are not included.
new worm and sector gear.
GM Power Rack and Pinion Hose Kit
Vega Box Mounting FLAFR1610
Bracket
FLAFR1500MP
Heavy steel mounting plate for
Vega steering box includes a
gusset. Mount must be welded in
place.

Pitman Arms
Part No. Description
FLAFR1493 Vega Style Pitman Arm, 6", Double Tapered
FLAFR1493C Corvair Pitman Arm
Remote reservoir style hose kits include stainless
braided lines with fittings. Kits add a clean, polished
appearance and simplify installation of Flaming River
Mustang Power Rack and Pinion power rack and pinion kits.

Power Steering Pump Bracket

Bracket is for Stage
II style pumps
The rack uses Mustang II 16" center mounts, FLAFR1601 and features a
outer ends and is rated for a maximum front end vehicle revolutionary new
weight of 1,750 pounds. Hoses, pump, pyramid style design, made of
U-Joint and reservoir are not included. black oxide steel and
available for small
Part No. Description
FLAFR40001 1974-78 Mustang Rack Only/16" Mounting
block and big block
FLAFR1789P Pyramid Style U-Joint To 3/4" DD
Chevy applications.
Adjustable design
allows use with short
Mustang II Manual Rack and Pinion and long water pumps. Includes a billet aluminum tension
adjuster and mounting hardware.
Part No. Description
FLAFR1612 Power Steering Pump Bracket for Small Block Chevy
FLAFR1613 Power Steering Pump Bracket for Big Block Chevy

Among the most popular steering systems with street

rodders, unit features 4.15 turns lock-to-lock with 5-1/4" Aluminum Power Steering
of rack travel. Rack tube is polished stainless steel. Pump Pulleys
Two outer tie rod ends and bushings are necessary for Polished aluminum power steering
installation. New, not rebuilt. pulleys are 6" in diameter and available
Part No. Description in both V-belt and serpentine belt
FLAFR1502 Mustang II Manual Rack And Pinion, 1974-78 Style configurations.
FLAFR1600 Mounting Bushing (Sold Individually, Two Required) Part No. Description
FLAFR1601 Outer Tie Rod Ends (Sold Individually, Two Required) FLAFR1574 V-Belt P/S Pulley for KRC Pump

198 2023 - 2024 HOT ROD AND EARLY MUSCLE

 The Little Switch
1979-93 5.0L Mustang Manual
Rack and Pinion Deluxe Kit FLAFR1002
Inexpensive switch serves a dual
function as a battery disconnect and
an anti-theft device. Rated at 100 amps,
switch is water resistant and locks
with a removable key.

The BIG SWITCH

A bolt-in replacement for 1979-93 Mustang. Eliminates FLAFR1003
the stock power rack, pump, pulley, and rag joint, reduces A heavy-duty battery disconnect
overall vehicle weight by 30 pounds, and provides smooth, switch is designed for complex
responsive steering. Kit includes manual rack, high- electrical systems or 16-volt batteries.
performance needle bearing U-joint and shaft, manual Rated at 250 amps continuous service
tie rod ends, and 2-piece mounting bushings. Rack and (12/16/24-volt) and 2500 amps for
pinion unit is available separately. 5-second surges. This spring-loaded,
Part No. Description waterproof, and vibration-resistant
FLAFR1503 1979-93 Manual Rack And Pinion Only switch can take hard use. An easy-grip
T-handle, anodized aluminum bracket and zinc-plated
High-Performance Steering Shaft Kits hardware are included.
for 1979-93 Mustangs
The Light
FLAFR1001
Self-powered timing light
uses two D-cell batteries,
eliminating bulky battery
leads. Single wire inductive
pickup and Xenon bulb make
timing marks clear even
Available for Flaming River manual rack or stock 1979-93
in bright sunlight. Lens is
Mustang’s power rack to eliminate rag joint and improve
surrounded by a flexible rubber guard.
appearance and steering response. Shafts are a must
when large tube headers are to be installed. Fitted with
two needle bearing U-joints, shafts bolt directly into the “Electro Wizard” Automatic Battery
column and weldless intermediate shaft. Overall length of Disconnect Switch
both shafts is 13".
FLAFR1052
Part No. Description
FLAFR1504M 1979-93 Mustang Hig- Performance Manual Shaft
Add peace of mind without
FLAFR1504P 1979-93 Mustang High-Performance Power Steering Shaft the trouble associated
with traditional battery
disconnect switches.
Heavy-duty, 12-volt battery
Outer Tie Rod Ends disconnect switch wires
and Mount Bushings directly into the vehicle’s ignition switch, providing
Ideal for use with Flaming River rack complete electrical system shut-down the moment
and pinion units. the ignition is shut-off. Specialized passive magnetic
Part No. Description solenoidoperation allows instant activation/deactivation
FLAFR1600 Bushings To Mount Mustang II Rack and Pinion once the ignition is turned “On” or “Off”. Comes with
FLAFR1601 1974-78 Mustang II Tie Rod End Set battery terminal covers and plastic cover.
FLAFR1603 1979-93 Mustang Tie Rod End Set

Microsteer Universal
VDOG Variable-Angle Manual Steering Box Electric Power
FLAFR20303 Steering Kit
The VDOG variable angle FLAFR40200
steering box features a 90° Add electric assisted
design with a 35° variable power steering to
angle shaft and 3/4"-36 output virtually any vehicle, even those with a manual steering
shaft. The articulating ball system. Assist amount can be adjusted via the included
design allows for maximum tuning box, or make the system speed sensitive by
adjustability, and the cast aluminum housing can be connecting a wheel speed sensor. 12V system draws an
mounted vertically or horizontally. Fully gear-driven average of less than 2 amps. Includes motorized gearbox
articulating ball design has a 1:1 ratio. with 11/16"-36 input/output shafts, control unit, tuning
box, wiring harness, and speed sensor.

2023 - 2024 HOT ROD AND EARLY MUSCLE 199

FIREAID
FireAde® 2000 is the most complete and user friendly firefighting agent produced worldwide.
The Green Agent Technology™ is environmentally friendly using 98% organic compounds and is
biodegradable. Aerosol container.
Part No. Description
FIR16FA2K 16 oz. Ground Shipment Only
FIR30FA2K 30 oz.

Universal Kits Pre-Cut Kits

FTLFB12

Part No. Description

FTLFB12 12" x 36", Set of Four
FTLFB20 18" x 32", Set of Five
FTLFB36 18" x 32", Set of Nine FTLTABF2017 FTLTABT4015
FTLFB72 24" x 48", Set of Nine Part No. Description
FTLTABF2017 1968-69 GM F-Body, Convertible, Complete
Pre-Cut Kits FTLTABF2018 1976-81 GM F-Body T-Top, Complete
FTLTABF2019 1993-02 GM F-Body, Floor
FTLTABF2020 1993-02 GM F-Body, Doors
FTLTABF2021 1993-02 GM F-Body, Roof
FTLTABF2022 1993-02 GM F-Body, Trunk
FTLTABF2023 1993-02 GM F-Body, Complete
FTLTABF2024 1982-92 GM F-Body, Floor
FTLTABF2025 1982-92 GM F-Body, Doors
FTLTABF2026 1982-92 GM F-Body, Trunk
FTLTABA1001 FTLTABF2027 1982-92 GM F-Body, Roof
FTLTABA1011 FTLTABF2028 1982-92 GM F-Body, Complete
FTLTABF2029 1982-92 GM F-Body, Full
Part No. Description FTLTABF2030 1993-02 GM F-Body, T-Top, Complete
FTLTABA1001 1964-72 GM A-Body, Roof
FTLTABF2031 1970-73 GM F-Body, Roof
FTLTABA1003 1964-67 GM A-Body, Doors/Quarter Panels
FTLTABF2032 1970-73 GM F-Body, 2-Door, Complete
FTLTABA1004 1968-72 GM A-Body, Doors/Quarter Panels
FTLTABT4001 1967-72 Chevy/GMC Truck, Complete
FTLTABA1005 1964-67 GM A-Body, Floor
FTLTABT4002 1973-80 Chevy/GMC Truck, Complete
FTLTABA1006 1968-72 GM A-Body, Floor
FTLTABT4003 1981-87 Chevy/GMC Truck, Complete
FTLTABA1007 1964-67 GM A-Body, Trunk
FTLTABT4004 1967-72 Chevy/GMC Truck, Floor, High Tunnel
FTLTABA1008 1968-72 GM A-Body, Trunk
FTLTABT4005 1967-72 Chevy/GMC Truck, Doors
FTLTABA1011 1964-67 GM A-Body, 2-Door, Complete
FTLTABT4006 1967-72 Chevy/GMC Truck, Cab Panels
FTLTABA1012 1968-72 GM A-Body, 2-Door, Complete
FTLTABT4007 1973-87 Chevy/GMC Truck, Doors
FTLTABA1013 1964-67 GM A-Body, Convertible, Complete
FTLTABT4008 1973-87 Chevy/GMC Truck, Cab Panels
FTLTABA1014 1968-72 GM A-Body, Convertible, Complete
FTLTABT4009 1973-80 Chevy/GMC Truck, Floor, Low Tunnel
FTLTABF2001 1967-69 GM F-Body, Roof
FTLTABT4010 1981-87 Chevy/GMC Truck, Floor, Low Tunnel
FTLTABF2002 1974-81 GM F-Body, Roof
FTLTABT4011 1967-72 Chevy/GMC Truck, Floor, Low Tunnel
FTLTABF2003 1968-69 GM F-Body, Doors/Quarter Panels
FTLTABT4012 1967-72 Chevy/GMC Truck, Complete, Low Tunnel
FTLTABF2004 1970-81 GM F-Body, Doors/Quarter Panels
FTLTABT4013 1973-80 Chevy/GMC Truck, Floor, High Tunnel
FTLTABF2005 1967 GM F-Body, Doors/Quarter Panels
FTLTABT4014 1973-80 Chevy/GMC Truck, Complete, High Tunnel
FTLTABF2007 1967-68 GM F-Body, Trunk
FTLTABT4015 1981-87 Chevy/GMC Truck, Floor, High Tunnel
FTLTABF2008 1969 GM F-Body, Trunk
FTLTABT4016 1981-87 Chevy/GMC Truck, Complete, High Tunnel
FTLTABF2009 1970-81 GM F-Body, Trunk
FTLTABT4017 1973-87 Chevy/GMC Truck, Roof
FTLTABF2011 1967-69 GM F-Body, Floor
FTLTABF2012 1970-81 GM F-Body, Floor
FTLTABF2013 1967 GM F-Body, 2-Door, Complete
FTLTABF2014 1968-69 GM F-Body, 2-Door, Complete
FTLTABF2015 1974-81 GM F-Body, 2-Door, Complete
FTLTABF2016 1967 GM F-Body, Convertible, Complete

200 2023 - 2024 HOT ROD AND EARLY MUSCLE

Zinc Radiator Anode S-Blade Fans
FLE106781 S-shaped blades deliver the
Protects cooling system from maximum air flow and strong
corrosion. Just screw in place of enough to replace a belt-driven
1/4"NPT drain petcock. fan and fan clutch. Electric fans
operate independently from any
engine accessories so they can
Black Magic Xtreme Fan, focus on cooling without hindering
Ford Mustang 5.0 water pump operation or robbing
horsepower and torque. All listed models are pusher/
FLE105401 puller fans. Adjustable thermostat and A/C relay not
Pulling in a whopping 3300 CFM, included.
the Black Magic Xtreme 1979-93
Mustang fan has 185°F on/off Fan AMP Mounting
Part No. Dimensions Dia. RPM CFM Draw System
adjustable thermostat and an air FLE116530 11-1/2" x 10-7/8" x 2-5/8" 10" 3375 775 5.2 Through Core
conditioning relay. It is 21-1/2" FLE104359 12-5/8" x 11-3/4" x 2-5/8" 12" 2245 925 7.7 Through Core
x 17-1/2" x 4-3/16" and draws 18 FLE104360 14-1/2" x 13-7/8" x 3-3/4" 14" 2275 1530 9.2 Through Core
amps. Includes a 40-amp fuse. FLE104637 16-5/8" x 15-3/4" x 4" 16" 2250 1980 13.5 Through Core
FLE105317 16-5/8" x 15-3/4" x 4" 16" 2340 2500 17 Through Core

Black Magic
Flex-Wave Electric Fans
X-Treme Electric Fan Flex-Wave fans feature a
Larger and more powerful than revolutionary sine-wave blade
any other single fan currently design that moves more air with
available, the 3300 CFM puller greater efficiency and less noise
style fan features a 16" curved than conventional straight or S-blade
blade housed in a rigid nylon electric fans. 10-bladed design
shroud. Dimensions are 21-1/2" x moves up to 2660 CFM (16” models).
17-1/2" x 4-4-3/16". Available in standard reversible
Part No. Description Thermostat Mounting CFM models, or LoBoy pusher or puller
Bracket
FLE104811 Puller Adj. 160°-240°F Universal 3300
styles. LoBoys are only 3-3/16" deep.
FLE104367 Puller None Universal 3300 Controls not included.
Reversible Models
Black Magic Part No. Dimensions Air Flow (CFM) Amps Fan Dia.
FLE116542 12” x 13” x 3-1/2” 1,325 8 12”
Electric Fans FLE104364 14-1/4” x 14-3/4” x 3-1/2” 1,900 9.5 14”
Flex-A-Lite’s most powerful 15" FLE116544 16” x 16-1/2” x 3-3/4” 2,660 11 16”
electric fan provides constant air LoBoy, Puller
FLE105390 2,660 11 16”
flow regardless of engine RPM or 16” x 16-1/2” x 3-3/16”
vehicle speed. The lightweight FLE105391
LoBoy, Pusher
2,660 11 16”
plastic shroud has a full contact 16” x 16-1/2” x 3-3/16”
rubber seal which improves fan
efficiency and prevents radiator
core damage. Dimensions are 18" x
16" x 4-1/4".
Mounting
Part No. Description Thermostat CFM
Bracket
FLE109304 Puller Adj. 160°-240°F Universal 3000 Trimline Reversible
FLE104310 Puller None Universal 3000
Electric Fans
An excellent fan for tight spaces.
Each fan has ten blades set at a 21°
LoBoy Electric Fan angle.
A powerful 16" cooling fan with a
Mounting Surface Fan AMP Mounting
maximum depth of only 3-3/16" for Part No. Required Dia. RPM CFM Draw System
use in tight engine compartments. FLE116538 11-1/4" x 10-3/4" x 2-1/2" 10" 2460 800 6.5 Through Core
It can be positioned off-center to FLE104362 13" x 12" x 3-1/2" 12" 2150 1105 8 Through Core
fit in areas with as little as 2" of FLE105386 14-3/4" x 14-1/2" x 3-1/2" 14" 2220 1585 9.5 Through Core
clearance. FLE105387 16-1/2" x 16" x 3-3/4" 16" 2200 2215 11 Through Core
Fan AMP
Part No. Description Dia. CFM Mounting
RPM Draw
FLE104358 LoBoy Fan, Puller 16" 2,280 2500 18.5 Nylon Bracket
FLE104692 LoBoy Fan, Pusher 16" 2,280 2500 18.5 Nylon Bracket

2023 - 2024 HOT ROD AND EARLY MUSCLE 201

In-Line Hose Adapters Variable Speed Control with
Provides a threaded fitting for screw- Threaded Temp Sensor
in temperature sensors. Features two
1/4"NPT threaded ports and a 1/4" brass FLE107012
FLE107078
plug. Unit measures
coolant temp
Part No. Description
FLE107078 Fits 1-1/2" ID Radiator Hose
flowing into
FLE108426 Fits 1-3/4" ID Radiator Hose the radiator
and provides
Mojave Heater thermostatic
control over
FLE117306 electric fans. Includes 3/8" and 1/2"NPT adaptors and
Compact in-car heater uses vehicle 1/4"NPT probe for a direct fit to in-line hose adaptors or
cooling system to heat the air and is a can be installed directly into engine.
great choice for a street machine. Unit moves 140 CFM,
has 12,000 BTU of output and measures 12" x 9" x 5". Adjustable
Temperature Sensor
Extreme S-Blade Electric Fans
FLE107006
FLE105308 Turns fan on/off at the desired
High-output motor temperature. Dial-adjustable
and aggressive blade 180°-240°F. Gives the freedom
pitch pulls 20% more to set one temperature for
air. Eight-blade occasional high-demand use,
reversible fans are then reset for day-to-day driving.
a universal fit with a
depth of only 4".
Dimensions CFM AMP Draw Controls Included
Variable Speed Fan Control
Dual Fans With Gray Shroud FLE123241
26-1/4" x 15-1/2" x 4" 3000 17.5 To 29
Adjustable Thermostat, Mount on
A/C Relay And VSC† or near the
† Equipped with a Variable Speed Control (VSC) 31165 which matches fan motor speed to cooling electric engine-
demand.
cooling fan.
Senses coolant
Low-ProFile S-Blade Electric Fans temperature via
Ideal fans for probe in radiator
critical clearance. core and sets
Eight-blade 12-1/8" fan speed from 60% to 100%, depending on setting.
diameter fans Allows greater control over engine temperature; reduces
are a universal fit charging spikes and current load on charging system.
and available in Directs fan to run 30 seconds after vehicle is turned off.
pusher or puller
configurations with Variable Temperature Control
the lowest profile
on the market. with Quick Start
Temperature control
AMP
Part No. Dimensions CFM Draw Controls Included unit senses coolant
Single Puller Fan temperature and
FLE105400 13-1/2" x 15" x 2-5/8" 1250 11
Adj. Thermostat and regulates fan speed
A/C Relay with an adjustable,
FLE116550 13-1/2" x 15" x 2-5/8" 1250 11 No Controls 160°-220°F
Single Pusher Fan thermostat. Fan will
Adj. Thermostat and
FLE104726 13-1/2" x 15" x 2-5/8" 1250 11 continue to run for
A/C Relay
Dual Puller Fans
30 seconds after engine is shut-off. Unit is designed for
15-1/2" x 26-1/4" x Adj. Thermostat, A/C 12-volt systems only and includes a 45-amp maximum
FLE116551 2500 14-22 load rating.
2-5/8" Relay and VSC†
15-1/2" x 26-1/4" x Adj. Thermostat, A/C Part No. Description
FLE104308 2500 14-22
2-5/8" Relay FLE107185 Variable Temperature Control, Screw-In Sensor
15-1/2" x 26-1/4" x FLE106999 Variable Temperature Control, Probe Sensor
FLE105422 2500 14-22 No Controls
2-5/8"
Dual Pusher Fans
15-1/2" x 26-1/4" x Adj. Thermostat, A/C
FLE105399 2500 14-22
2-5/8" Relay and VSC†
† Equipped with a Variable Speed Control (VSC) 31165 which matches fan motor speed to cooling
demand.

202 2023 - 2024 HOT ROD AND EARLY MUSCLE

Molded Nylon Fans Advanced Transmission
Lightweight eleven-ounce molded nylon fans are eco­
nom­i­c al and en­gi­neered for strength and du­ra­bil­i­t y.
and Engine Oil Coolers
8000 RPM rating.
Part No. Description
FLE104715 14" Diameter
FLE104458 15" Diameter
FLE116562 16" Diameter
FLE116567 17" Diameter
FLE104465 18" Diameter

The Race Fan

An inexpensive, easy-to-replace belt-driven fan for
racers. Fans have steel centers, six steel or aluminum
blades, and are available in 15", 17", 18, or 19" with black
powder coat finishes. Pitch width is 1-3/4". All have a
standard automotive mounting
pattern. Flex-A-Lite
stacked-plate
Part No. Description coolers are made
FLE101584 17" Fan, Steel Blades
of 100% aluminum
FLE106285 19" Fan, Steel Blades
FLE101576 15" Fan, Aluminum Blades
for added strength,
FLE101581 17" Fan, Aluminum Blades durability, and reduced weight.
FLE101351 18" Fan, Aluminum Blades The design nearly doubles cooling
FLE101588 19" Fan, Aluminum Blades performance compared to traditional tube
coolers, while greatly reducing oil pressure drop.
Reverse Rotation Fans Unique turbulator and dimpled-plate design mixes oil as it
Use reverse rotation fans on serpentine belt systems. flows, significantly improving cooling.
Rated to 10,000 RPM, the fans provide maximum airflow Available in standard and remote-mount versions.
at low RPM, and reduce engine loads at highway speeds. Remote mount models include electric cooling fan.
Fans have standard automotive Part No. Description GVWR Type Of Fitting CFM
mounting pattern and a projected Transmission Coolers
17-Row
depth of 2-1/4". FLE113802 Up to 7,000 3/8" Barbed Fittings —
11x6x3/4"
Part No. Description 30-Row
16" Gold/Stainless Reverse FLE113800 Up to 32,000 3/8" Barbed Fittings —
FLE106275 11x10 x 3/4"
Rotation Fan 8-Row
17" Gold/Stainless Reverse FLE119857 Up to 4,500 -6 AN Fittings —
FLE102113 11x3 x 5/32"
Rotation Fan Remote Mount Stacked Plate
17-Row 11x6x3/4"
FLE113803 Up to 26,000 3/8" Barbed Fittings 600
Standard Rotation Fans with Electric Fan
With the industry’s highest RPM rating (10,000), the Engine Oil Coolers
7-Row -8,-10, and -12
1300 Series fans are perfect for high-performance FLE104431
11x2-3/4"x1-3/4"
Up to 7,000
AN Fittings Included
—
and heavy-duty applications. The 17-Row -8,-10, and -12
1300’s stainless steel blades flex at FLE104432 Up to 17,000 —
11x5-3/4"x1-3/4" AN Fittings Included
higher RPM, reducing drag, adding 21-Row -8,-10, and -12
FLE104120 Up to 26,000 —
horsepower, and improving fuel 11x7-1/2"x1-3/4" AN Fittings Included
economy. Blue center. Remote Mount Stacked Plate
32-Row
Part No. Description -8,-10, and -12
FLE116323 with Electric Fan Up to 26,000 800
FLE101254 16" Diameter AN Fittings Included
11x11"x4-1/4"
FLE101567 17" Diameter
FLE101259 18-3/8" Diameter

Engine Fan Spacer Kits

Sometimes, it is necessary to space the Tranny Cooler Remount Kit
fan closer to the radiator and that’s where
these spacer kits come in handy. Each kit FLE117768
contains a spacer, shim, cap screws, and Cooler mounting kit includes
lockwashers. All spacers have 5/8" pilot unless specified. Plastro rods, nuts,and
Part No. Description
spacers.
FLE107081 1/2" Thick, Fits Chrysler Products
FLE107083 1" Thick, Fits Chrysler Products
FLE108431 2" Thick, Fits Chrysler Products
FLE108432 2" Thick, Corvette, Ford, 3/4" Pilot
FLE106786 1/2" Thick, Fits GM, Ford Products
FLE106880 1" Thick, Fits GM, Ford Products
FLE106883 2" Thick, Fits GM, Ford Products

2023 - 2024 HOT ROD AND EARLY MUSCLE 203

American Thunder and Force II™ Exhaust Systems
American Thunder will deliver an aggressive tone and outstanding performance. The Force II system will provide plenty of
Flowmaster tone under acceleration, but will produce lower sound levels while cruising. All systems aluminized unless noted.
Pipe Dia. American Tailpipe Exit
Model Years Force II Type
In/Out Thunder Location
Buick
Skylark/GS V8 1964-72 2-1/2"/2-1/2" FLO17119 — CMB DOR
Chevrolet
C10 Pickup 1963-66 2-1/2"/2-1/2" FLO817937 7, 8 — CMB DOR/DOS
Camaro V8 1967-68 2-1/2"/2-1/2" FLO17129 — CMB DOR
Camaro V8 1967-74 2-1/2"/2-1/2" FLO17104 2 — CMB DOR
Camaro V8 1969 2-1/2"/2-1/2" FLO17139 5,2 — CMB DOR
Camaro 1970-73 2-1/2"/2-1/2" FLO17149 — CMB DOR
Camaro w/ 2-1/2" Cat 1986-91 3"/3" FLO17234 — CAT DOR
Camaro V8 1986-91 3"/3" FLO17233 1,3 — CAT DOR/SOR
Chevelle/El Camino V8 1964-72 2-1/2"/2-1/2" FLO17119 — CMB DOR
Chevy II/Nova V8 1968-74 2-1/2"/2-1/2" FLO17104 — CMB DOR
Nova V8 1968-74 2-1/2"/2-1/2" FLO817158 6 — CMB DOR
Corvette V8 1986-90 2-1/4"/2-1/2" — FLO17153 1 CAT DOR
Impala 1966-68 2-1/2"/2-1/2" FLO17655-FM 1 — CMB DOR
Ford
F100 Pickup 1967-72 2-1/2"/2-1/2" FLO817938 7, 8 — CMB DOR/DOS
Mustang 1967-70 2-1/2"/2-1/2 FLO817281 1, 7 — CMB DOR
Mustang (Exc. Conv. and GT) 1964-66 2-1/2"/2-1/2" FLO17273 — CMB DOR
FLO17113 CAT
Mustang GT 5.0 1986 DOR
2-1/2"/2-1/2" FLO17213 1 — CAT
Mustang LX V8 1986-93 DOR
FLO817213 7 CAT
Mustang GT 5.0 1987-93 2-1/2"/2-1/2" FLO17116 — CAT DOR
Oldsmobile
Cutlass/4-4-2 V8 1964-72 2-1/2"/2-1/2" FLO17119 — CMB DOR
Pontiac
GTO/LeMans 1964-72 2-1/2"/2-1/2" FLO17119 6 — CMB DOR
Firebird V8 1967-68 2-1/2"/2-1/2" FLO17129 5 — CMB DOR
Firebird V8 1967-74 2-1/2"/2-1/2"" FLO17104 2,5 — CMB DOR
3"/3" FLO17233 1,3 CAT DOR/SOR
Firebird V8 1986-91 —
2-1/2"/2-1/2" FLO17234 1 CAT DOR
LeMans/GTO V8 1964-72 2-1/2"/2-1/2" FLO17119 — CMB DOR

Footnotes Type Tailpipe Exit Key

1 Stainless Tips CAT Cat-Back SOR Single outlet, rear exit
2 Transverse Mounted Muffler CMB Crossmember Back DOR Dual outlet, rear exit
3 Single 3" In, Dual 3" Out DOS Dual outlet, side exit
5 Not for Convertible Models
6 No Stainless Tips
7 409 Stainless Steel
8 Fits Short & Long Bed

Crossmember-Back Dual Exhaust Systems

Crossmember-back dual exhaust systems are
available for GM, Ford, and Chrysler vehicles and
feature mandrel-bent 2-1/2" aluminized steel tubing
, extra-long front pipes, all clamps, hangers, and
necessary hardware. Choose your mufflers separately.
FLO17107

204 2023 - 2024 HOT ROD AND EARLY MUSCLE

U-Fit Dual Pipe Kits Stainless Steel Exhaust Tips
Kits have all the pipes Flowmaster’s line of stainless steel exhaust tips are a
needed to build a great way to let people know that you have Flowmasters
custom dual exhaust under your ride! They come in a variety of styles from
system in 2-1/4", brushed to polished and will greatly enhance the look of
2-1/2", and 3" pipe your vehicle. Sold individually
diameters. U-fit kits
include front adapter
pipes, intermediate
pipes, H-pipe assembly, over the axle pipes and your
choice of optional tailpipe exits. Each piece has a slip-
fit connection for easy assembly and is mandrel bent,
16-gauge aluminized steel.
Part No. Diameter
FLO15935 2"-1/4
FLO15936 2"-1/2
FLO15937 3" Exhaust
Part No. Tip Design Tip Dia.
Dia.
Super HP-2™ FLO15361 Stainless Rolled Edge 2.5" 3"
Starting with the FLO15362 Stainless Angle Cut 2.5" 3"
FLO15363 Stainless Rolled Edge 3" 3.5"
laminar core of the
FLO15365 Stainless Rolled Edge 2.5" 4"
classic HP-2 muffler
FLO15366 Stainless Rolled Edge 3.5" 4"
and wrapping it in a new compact square case. The
FLO15380 Turn Down2 2.25" 2.5"
new Super HP-2 Series muffler offers the same great
FLO15385 Oval Polished2 2.5" 4.25" x 2.5"
performance benefits and moderate tone that you would
FLO15391 Angle Dual1 2.5" Dual 4"
expect from the laminar flow mufflers, now in a new sleek
1 - Weld on. 2 - Clamp on.
styling. These mufflers are available in either a 409S
stainless steel case or a polishable 304S stainless steel
case.
Header Collector
T409 Stainless Part No. T304 Stainless Part Description
No.
SUPER HP-2™ “Standard”– 4" x 5-1/2" x 18" Case
Ball Flange Kit
FLO12518409 FLO12518304 2-1/2" Dia. Inlet/Outlet FLO15925
SUPER HP-2™ “Shorties”– 4" x 5" x 12" Case Convert leaky, messy header-
FLO12412409 — 2-1/4" Dia. Inlet/Outlet to-street exhaust hookup with
FLO12512409 FLO12512304 2-1/2" Dia. Inlet/Outlet a OEM -style ball-and-socket
connection. Adapts a 3" header
Scavenger Series Elite Headers collector to a 2-1/2" ball-and-
Flowmaster now offers high-quality shorty and long socket style connection.
tube headers to go with their proven exhaust products.
Formed from 14-gauge 409S stainless steel and ceramic
coated for maximum durability, headers are backed by Super 10™ Series Delta Flow ®
a one-year limited warranty and include all gaskets and
hardware. Stainless Steel Mufflers
The Super 10 Series of mufflers is designed for those
looking for the loudest most aggressive tone they can
Long Tube Headers find. Designed for off-highway use only, they incorporate
Elite Long Tube headers Flowmaster's proven Delta Flow technology for maximum
feature 3/8" thick performance . Welded 409S stainless steel with a black
warp-resistant painted finish. 4" thick, 9-1/2" wide, 12-1/2" overall length,
header flanges 6-1/2" case length.
and ball flange
collectors for leak-
free connections.
Part No. Application
Chevy
396-454 BBC, 1967-74 Camaro, 1965-72 Chevelle,
1968-74 Nova, 1965-72 El Camino, 1970-74 Monte
FLO814111
Carlo, 1-3/4" Primary,
3" Collector
396-454 BBC, 1968-74 Chevelle/El Camino, 2" In/Out Part No.
FLO814114 3"/3" FLO843016
Primary, 3-1/2" Collector
396-454 BBC, 1964-72 Chevelle/GTO with LS
FLO814116
Engine, 1.75" Primary, 3" Collector

2023 - 2024 HOT ROD AND EARLY MUSCLE 205

Super 40 Series™ Aluminized Mufflers
The Super 40 Series outflows the older two chamber mufflers. Has more horsepower, less interior sound, and deeper
exterior sound. 5" thick, 10" wide, 19" overall length, 13" case length.

In/Out Part No. In/Out Part No. In/Out Part No. In/Out Part No.
2-1/4" FLO952445 2-1/4" FLO952446 2-1/2" FLO952547 2-1/2" FLO952548
2-1/2" FLO952545 2-1/2" FLO952546 3" FLO953047 3" FLO953048
3" FLO953045 3" FLO953046

In/Out Part No. In/Out Part No.

3" FLO953049 3" FLO9530452

40 Series ™ The Original Flow ® Aluminized Mufflers

40 Series The Original Flow is one of the more aggressive sounding street and strip mufflers in Flowmaster’s product line.
Black finished aluminized steel. 4" thick, 9-3/4" wide, 19" overall length, 13" case length.

In/Out Part No. In/Out Part No. In/Out Part No. In/Out Part No.
2-1/4" FLO42441 2-1/4" FLO42442 2-1/4" FLO42443 2-1/2" / 3" FLO425403
2-1/2" FLO42541 2-1/2" FLO42542 2-1/2" FLO42543

40 Series ™ Delta Flow ® Stainless Steel Mufflers

The 40 Series Delta Flow is a milder sounding street and strip muffler, generating a powerful, aggressive sound outside the
vehicle and a lower sound level inside. 4" thick, 9-3/4" wide, 19" overall length, 13" case length.

In/Out Part No. In/Out Part No.

2-1/2" FLO842541 2-1/2" FLO842543

40 Series™ Stainless Steel Performance Mufflers

Seven original 40 Series Flowmasters are now available in stainless steel for longer life. Choose from a variety of inlet and
outlet configurations and mufflers with 2-1/4", 2-1/2", and 3" inlet and outlet diameters.
4" thick, 9-3/4" wide, 19" overall length, 13" case length.

In/Out Part No. In/Out Part No. In/Out Part No.

2-1/2" FLO8042541 2-1/2" FLO8042543 3" FLO80430402
3" FLO8043041 3" FLO8043043

206 2023 - 2024 HOT ROD AND EARLY MUSCLE

Super 44 ™ Delta Flow ® 409S ® Stainless Steel Mufflers
Super 44™ muffler series is now available in 409S® stainless steel and covered by a 10-year limited warranty. This
favorite among performance enthusiasts delivers improved engine efficiency and throttle response, along with
a deep, powerful tone. Using Flowmaster’s Delta Flow® technology for optimum exhaust scavenging and sound
quality, the Super 44 Series is the most aggressive, highest performing street muffler.
4" thick, 9-3/4" wide, 19" overall length, 13" case length.

In/Out Part No. In/Out Part No. In/Out Part No.

2-1/2" FLO842546 2-1/2" FLO842548 3"/2-1/2" FLO8430452
3" FLO843046 3" FLO843048

Super 44 ™ Delta Flow ® Aluminized Steel Mufflers

The Super 44 has the most aggressive, deepest tone Flowmaster has ever made. Black-finish mufflers have improved flow
path radius which translates into more torque and power! 4" thick, 9-3/4" wide, 19" overall length, 13" case length.

In/Out Part No. In/Out Part No. In/Out Part No. In/Out Part No.
2-1/4" FLO942445 2-1/4" FLO942446 2-1/4" FLO942447 2-1/4" FLO942448
2-1/2" FLO942545 2-1/2" FLO942546 2-1/2" FLO942547 2-1/2" FLO942548
3" FLO943045 3" FLO943046 3" FLO943047 3" FLO943048

In/Out Part No. In/Out Part No. In/Out Part No. In/Out Part No.
2-1/2" FLO942549 3" FLO9430452 2-1/2" FLO9425472 2-1/2" FLO8425454 *
3" FLO943049 3"/2-1/4" FLO9430472 * 9-1/2" case Width

50 Series ™ Delta Flow ® Aluminized Steel Mufflers

The 50 Series is designed to produce a mellow, deep sound in most vehicle applications. It is milder than the 40 Series
muffler on the outside of the vehicle, and is significantly quieter inside the vehicle. Aluminized steel. 4" thick, 9-3/4" wide,
23" overall length, 17" case length.

In/Out Part No. In/Out Part No.

2-1/4" FLO942450 2" FLO942051
2-1/2" FLO942550 2-1/4" FLO942451
3" FLO943050 2-1/2" FLO942551
3" FLO943051
In/Out Part No.
In/Out Part No. 2-1/4" FLO942452
In/Out Part No.
3"/2-1/4" FLO9430522 2-1/2" FLO942552
2-1/4" FLO942453
3"/2-1/2" FLO9430502 3" FLO943052
2-1/2" FLO942553
3" FLO943053

2023 - 2024 HOT ROD AND EARLY MUSCLE 207

50 Series™ Delta Flow ® Stainless Steel Mufflers
The 50 Series is designed to produce a mellow, deep sound in most vehicle applications. It is milder than the 40 Series
muffler on the outside of the vehicle, and is significantly quieter inside the vehicle. Stainless steel. 4" thick, 9-3/4" wide,
23" overall length, 17" case length.

In/Out Part No.

2-1/2" FLO842551
3" FLO843051 In/Out Part No.
2-1/4" FLO842453
2-1/2" FLO842553
In/Out Part No.
2-1/4" FLO842452

FlowFX Muffler
FlowFX mufflers provide a moderate performance sound level that is a bit
different than the traditional chambered tone that Flowmaster is known for.
These straight through style mufflers have a 409 stainless steel case.
Part No. Inlet Outlet Case (L x W x H) OAL
FLO71225 2-1/4” Offset 2-1/4” Center 14" x 9" x 4" 21"
FLO71226 2-1/2” Offset 2-1/2” Center 14" x 9" x 4" 21"
FLO71229 3” Offset 3” Center 14" x 9" x 4" 21"
FLO71235 2-1/4” Offset 2-1/4” Offset 14" x 9" x 4" 21"
FLO71236 2-1/2” Offset 2-1/2” Offset 14" x 9" x 4" 21"
FLO71249 3" Center 3" Center 18" x 9" x 4" 24"
FLO71415 2-1/4” Center 2-1/4” Center 14" x 4" Round 21"
FLO71419 3" Center 3" Center 14" x 4" Round 21"
FLO72198 3” Offset 2-1/2” Dual 14" x 9" x 4" 21"

Race Readies™ Red Hots

Race Readies keep the exhaust systems closed Red Hots
for street use, but may be quickly opened for may be the
competition. Fully welded, Race Readies best muffler value on the market
include 3/8" Grade 8 studs, washers, today. Back pressure is decreased
FLT53026
and gaskets, and are sold in pairs only. to increase flow and help boost
Part No. Description power. Red Hots are only available in a red finish.
Fits 2-1/2" Headers/2-1/2" with Exhaust Pipes, Part No. “A” “B” “C” “D”
FLT53026
Including Two 2-1/2" 3-Hole Flanges FLT50250 2" 2" 18" 24"
FLT50251 2-1/4" 2-1/4" 18" 24"
FLT50252 2-1/2" 2-1/2" 18" 24"

Purple Hornies

FLT50225 - Figure 1 FLT50231 - Figure 3

FLT50232 - Figure 4
FLT50230 - Figure 2
The classic Purple Hornies tubular glasspack mufflers provide impressive sound and performance gains.
Part No. “A” “B” “C” “D”
FLT50225 3" 3" 29" 32"
FLT50230 3" 2.25" 18" 24"
FLT50231 3" 3" 29" 32"
FLT50232 3" 3" 29" 32"

208 2023 - 2024 HOT ROD AND EARLY MUSCLE

Raptor Long-Tube Headers
An inexpensive, turbo- for 1975-91 GM
style muffler for budget Truck/SUV with SBC
projects. Aluminized
Long-tube headers with
construction and free-
1-1/2" primaries and 3"
flow design make this
collector pipes feature
muffler a performance
FlowTech's s exclusive thick, mandrel-formed Power
bargain. Case measures
Plenum collector and leak-proof O-ringed port seals.
13" long x 10" wide x 4-1/2"
Black painted mild steel. Mounting hardware included.
thick. Sold individually.
Sold in pairs.
Part No. Description
FLT50051 2-1/4" Inlet, 2-1/4" Outlet Muffler Part No. Description
FLT43006FLT Black Painted Headers for 1975-91 GM Trucks/SUVs w/SBC
FLT50052 2-1/2" Inlet, 2-1/2" Outlet Muffler

Long-Tube Headers Block Hugger Headers

for 1969-74 Ford Available in satin black painted
or metallic ceramic coated,
2WD F100 with SBF headers are complete with all nuts,
Long-tube headers bolts, and gaskets.
with 1-1/2" primaries
Part No. Description
and 3" collector pipes
FLT11000 Small Block Chevy, Black Painted
feature FlowTech's FLT31000 Small Block Chevy, Coated Ceramic
exclusive, thick,
mandrel-formed Power
Plenum collector and leak-proof O-ringed port seals.
Hugger Toobs
Silver metallic ceramic-coated steel. Include mounting FLT10010
hardware. Sold in pairs. Hugger Toobs connect Block
Part No. Description Hugger Headers to the exhaust
FLT32500 Ceramic-Coated Headers for 1969-74 Ford F100 w/302 system. Built from 16-gauge mandrel-bent tubing,
Hugger Toobs are for use with small block Chevy. Sold in
pairs, complete with flanges and gaskets.

Exhaust Headers
Headers are engineered and leak-tested to get maximum performance and fuel
economy from an engine. Afterburner headers contain a turbo chamber. Headers
include all mounting hardware, bolts, nuts, and quality gaskets. Available with
electrostatically applied PPG satin black paint finish or specially formulated, NASA-
developed silver luster ceramic coating.
Standard Ceramic Primary
Models Engine Headers Headers Col Size AC COL FLR COL FLR Footnotes
Chevrolet Full-Length Headers Footnotes:
1967-69 Camaro 283-400 FLT11100 FLT31100 1-5/8" x 3" 12 Y Y N Y 1, 4, 32, 58 Also Available with A.i.r. Welded
1970-81 Camaro 283-400 FLT11100 FLT31100 1-5/8" x 3" 23 Y Y N Y 1, 3, 4, 58 1 in Place, Add “S” to Part No. When
1970-72 Camaro 396-454 FLT11130 FLT31130 1-3/4" x 3" Y N Y N Y 1, 4 Ordering.
1964-77 Chevelle 283-400 FLT11100 FLT31100 1-5/8" x 3" 23 Y Y Y Y 1, 4, 32, 58 Must Modify Stock Exhaust
3
1978-87 Chevelle 283-400 FLT11104 FLT31104 1-5/8" x 3" 23 Y Y Y Y 1, 3, 4, 58 to Retain Catalytic Converters.
1964-74 Chevelle 396-454 FLT11130 FLT31130 1-3/4" x 3" Y N 43 N Y 1, 3, 4 Not Legal for Use on
4
1968-79 Chevy II/Nova 283-400 FLT11100 FLT31100 1-5/8" x 3" 23 Y Y Y Y 1, 3, 4, 32, 58 Pollution Controlled Motor.
1970-77 Monte Carlo 305-400 FLT11100 FLT31100 1-5/8" x 3" 23 Y Y N N 1, 3, 4, 58 27 Will Not Fit in Vehicles with Ram Air.
1978-87 Monte Carlo 283-400 FLT11104 FLT31104 1-5/8" x 3" 23 Y Y N N 1, 3, 4, 58 Pre-1970 Vehicles with Exhaust
1965-70 Passenger 283-400 FLT11100 FLT31100 1-5/8" x 3" 23 Y Y Y Y 1, 4, 32, 58 32 Manifold Mounted Alternator/Generator
Ford Mustang GT/LX 5.0L Full-Length Headers Use Bracket FLT10031.
1979-93 Equal Length 5.0L FLT12104 — 1-5/8"x30"x 3 Y N Y N Y 1, 3, 4, 66, 70, 71 End Holes on Head Must Be Drilled and
37
Pontiac Full-Length Headers Tapped to Assure Proper Seal.
1970-79 Firebird-TA 350-455 FLT11170 — 1-5/8" x 3" Y N Y N Y 1, 3, 4, 27, 37 51 Chevrolet Small Block V8 Engine.
283- 58 Will Not Fit Angle Plug Heads.
1982-90 Firebird-TA FLT11102 — 1-1/2" x 2.5" Y N Y N Y 1, 3, 4, 51, 58, 66 Header Is Equipped
400CH 66
1964-75 Grand Am 326-455 FLT11170 — 1-5/8" x 3" Y Y Y N Y 1, 3, 4, 27, 37 with an Oxygen Sensor Fitting.
283- Will Fit with Dart/Windsor Cylinder
1978-87 Grand Prix FLT11104 FLT31104 1-5/8" x 3" 23 Y Y N N 1, 3, 4, 51, 58 70
400CH Heads.
1964-75 GTO 326-455 FLT11170 — 1-5/8" x 3" Y Y Y N Y 1, 3, 4, 27, 37 Equal Length “Tuned” Style Header
71
1964-75 LeMans 326-455 FLT11170 — 1-5/8" x 3" Y Y Y N Y 1, 3, 4, 27, 37 Design.
283-
1978-87 LeMans FLT11104 FLT31104 1-5/8" x 3" 23 Y Y N Y 1, 3, 4, 51, 58
400CH

2023 - 2024 HOT ROD AND EARLY MUSCLE 209

Tall Polished Distributor Hold-Down Clamp
Aluminum FRDM12270-A302
FRDM6582-C460§ Chrome clamp fits 2.3L HSC, V6, and V8
Fits 429 and 460. 4-1/2" tall covers will clear stud girdle exc. “FE”.
and roller rocker arms.
Ignition Coil Bracket
Tall Polished Aluminum FRDM12044-A2
FRDM6582-Z351§
Fits 302 Boss, 351C, 351M,
and 400 and has new logo.
Tall covers will clear stud
girdle and roller rocker arms.
Auto Transmission
Black Satin Dipstick and Tube
FRDM6582-LE302BK* Part No. Description
Fits 289, 302, and 351W. Die- FRDM6750-D303 C-4
cast aluminum with baffle. FRDM6750-E303 C-6

Black Satin Oil Filter Adapter

FRDM6582-A* FRDM6880-B50
Fits 289, 302, and 351W. Rotates filter toward front of engine
to provide clearance for engine swaps
and chassis modifications. Fits most
* Direct replacement part.
Ford engines that use Motorcraft FL-1A
§ Not legal for sale or use on pollution-controlled motor vehicles. oil filter. Blue anodized aluminum.

Blue Satin 429-460 Oil Pan Kit

FRDM6582-LE302BL* FRDM6675-A460
Fits 289, 302, and 351W. Die- Rear sump oil pan kit
cast aluminum with baffle. fits 429-460 in 1979-93
* Direct replacement part. Mustangs and Fox-chassis
cars. Kit includes pan,
dipstick, tube, and pickup
1979-93 Mustang Performance with special attaching bolt.
Front/Rear Spring Kits Requires 1980-86 F-Series 460 oil pump (M6600-A460 -
Spring kits may be used to lower not included).
1979-93 Mustangs and improve their
handling. Ride quality will become 351W Oil Pan Kit
somewhat firmer.
FRDM6675-A58
Lower Spring Rate
Part No. Year Front Rear Front Rear Includes rear sump oil pan,
FRDM5300-B 1979-93 7/8"† 1/2"† 425/530 200/300 dipstick, tube and pickup
FRDM5300-C 1979-93 7/8"† 1/2"† 650 200/300 with special attaching
bolt. Fits 1979-93 Mustang
EFI Heat Spacer and Fox-chassis cars. Ideal for
engine swaps or for extra clearance on
FRDM9486-A51 modified vehicles. This is the oil pan used on
Type C phenolic spacer fits between Ford Racing FRDM6007-B351 engine assembly.
the upper and lower manifolds to
help dissipate heat and significantly
increase performance. Longer Off-Road Idler Bracket
bolts are included. For Stock 5.0L FRDM8604-A50*
manifold half. Competition idler bracket fits
1979-93, 302, and 351 Mustang
Engine Oil Dipstick engines when catalytic converters
are not used. For off-road use only.
FRDM6750-C303 Bracket is a direct replacement for stock air pumps and
Fits 1983-93 5.0L Mustang. uses a standard (stock) serpentine belt.

210 2023 - 2024 HOT ROD AND EARLY MUSCLE

A/C Eliminator Kit Short V-Belt Water Pump
FRDM8511-A50* FRDM8501-E351S
Relocates the power steering Eliminates the excessive length
where A/C compressor problem which often requires
was formerly. Fits 1985-93 firewall modifications when
Mustang. Requires new belt swapping Ford 289/302/351W
(not included). Hardware small blocks. Pump shortens
included. engine length by 1-1/2".
* Not legal for sale or use on pollution-controlled vehicles.
Polished Aluminum
351W Engine FRDM8511-A351 Spark Plug Wire Looms
Swap Accessory Drive Kits FRDM12297-L900
Kits fit 1985-93 Mustang and allow
use of 5.0L front-end accessory drive
components when swapping to a 351W
engine. Simply replace production
brackets using the existing bolts and Looms fit 8mm or 9mm wires and have adjustable
hardware. Serpentine belt selection will vary, brackets to fit all small or big block engines. Polished
depending on use of optional underdrive pulleys. finish.
Part No. Description
FRDM8511-A351 Power Steering Bracket Only 9mm Spark Plug
FRDM8511-B351 Power Steering and AC Bracket
Wire Sets
Wire-wound custom
ignition wire sets have
low resistance for
Flywheels minimum spark loss.
Ford Racing has 157-tooth stock Part No. Engine Color End Config. Wire Dia.
replacement and SFI-approved FRDM12259-C301 5.0/5.8L V8 Blue 45° Boot 9mm
flywheels available. FRDM12259-C462 4.6L 2V, V8 Blue 45° Boot 9mm

Part No. Description Material Unbalance

Pre-1981 302 and 351 Engines Clutch Linkage
Billet
FRDM6375-A302B†‡ Using 157T Flywheels.
Meets SFI 1.1
Steel
28.2 oz. in. Upgrade Kit
FRDM6375-C302B§
1981 and Later 302 Engines. Billet
50.0 oz. in.
FRDM7553-A302
Meets SFI 1.1 Steel Kit consists of
† Diaphragm clutch uses metric bolts and dowel pins a beefed-up clutch release fork and heavy-duty,
‡ Has bolt-on counter weight 4" long self-adjusting PTFE-lined clutch cable. Fits 1979-93
§ Has bolt-on counter weight 7.2" long Mustangs.
Notes: 1984 and later cars have heavy-duty cable as original equipment. 1986 and later cars
have beefed-up clutch release fork as original equipment. To install kit in 1979-81 vehicles with
Air Cleaner manual adjustment clutch mechanisms, the (1982 and later) self-adjusting quadrant mechanism
FRDM9600-C302 must be installed (not included in kit).

Black ribbed aluminum oval

singlequad air cleaner with “Cobra” Adjustable
logo. Not legal for sale or use on Clutch Linkage Kit
pollution-controlled vehicles. Includes all parts required to
convert stock non-adjustable
High-Torque Starter clutch cable to fully adjustable type.
Fits 1982-93 Mustangs.
FRDM11000-B51
Part No. Description
1.1kw high-torque starter is small
FRDM7553-B302 1982-93 Cable and Quadrant
in diameter, but cranks out more FRDM7553-C302 1982-93 Service Cable
power than a stock starter. It’s a lot
lighter, too. Fits small block Ford
with automatic transmission.
Topside Clutch Adjuster
FRDM7554-A
Adjust clutch engagement without going
under the car. Eliminates the rubber
bushing at the engine compartment
bulkhead for more precise clutch action.

2023 - 2024 HOT ROD AND EARLY MUSCLE 211

Double-Hook Clutch 8.8" Axle Installation Kit
Quadrant FRDM4050-B
FRDM7583-A Kit includes two bushings, two
Fits 1982-93 V8 Mustangs. Double- C-locks and one 4-ounce bottle
hook design permits use of an of friction modifier. These parts
adjustable clutch cable or topside clutch adjuster and are included with every Ford
stock cable. CNC machined from billet aluminum. Racing 8.8" axle assembly. Now
they are available separately.
HD Throwout Bearing
11" Brake Drum
FRDM7548-A
Fits 1979-93 Mustangs with manual FRDM1126-B
transmission and V8 engine. New brake drum measures 11" x
2-1/4", has a 5-lug x 4-1/2" bolt
circle, and a 2.780" pilot hole. Sold
Roller Pilot Bearings individually.
Production pilot bearings are pre-greased
(do not add extra grease – damage may occur).
FRDM7600-A HD Aluminum Driveshaft
Part No. Description
FRDM7600-A
Fits 289, 302, 351C and 351W Crankshaft Assembly
(0.669" Input Shaft)
FRDM7600-B Fits 4.6L Modular Engines
FRDM4602-GA

8.8" Ring and Pinion

Gear Sets Natural aluminum driveshaft assembly measures
45-1/2" long x 3-1/2" O.D., and includes 1330 U-joints
Gear sets fit popular Mustangs,
and 28-spline yoke. Fits 1979-1995 Mustang/Capri 5.0L
Rangers, and F-150's fitted with
vehicles with T-5/SROD/C-4/A0D, and 1979-1993 with
8.8" rears.
Tremec transmissions and 7.5" or 8.8" axles.
Part No. Description
FRDM4209-88373 3.73 Ring & Pinion Set
FRDM4209-88410 4.10 Ring & Pinion Set Mustang Wheels

8.8" Ring And Pinion

Installation Kit
FRDM4210-A
Use kit for changing ring-and-
pinion gear or differential.
Fits IRS. Includes: pinion and
carrier shims, crush sleeve,
pinion seal, pinion nut, ring
gear bolts, and cover gasket
Ford Racing Wheels are now available and in stock.
8.8" Axle/IRS Bearing
Call for styles and sizes.
and Seal Kits
Use kits to rebuild an 8.8"
differential.
Part No. Description
Fits 1986-93 Mustang (Non-IRS), Includes: 2 Outer Axle
FRDM1225-B
Shaft Bearings and Seals (2.256" OD Bearing)
Fits IRS, Includes: 2 Stub Shaft Pilot Bearings and
FRDM4413-A
Housing Seals

8.8" Traction-Lok Rebuild Kit

FRDM4700-B
Kit includes clutch pack,
shims, friction modifier
and instructions. Fits
all 8.8" Traction-Lok
differentials.

212 2023 - 2024 HOT ROD AND EARLY MUSCLE

Series 3000 Direct-Fit Hose Ends
Series 3000 direct-fit hose ends use the "cutter" method of hose attachment, shaving valuable inches in tight applications.
Designed exclusively for use with Series 3000 hose. Offered with black finish only.
Part No Description
FRG189010-BL 90° Fitting, -10AN Hose End to 7/8"-14 (-10AN)
FRG190106-BL Straight Fitting, -6AN Hose End to 1/4" MPT
FRG190166-BL Straight Fitting, -6AN Hose End to 3/8" MPT
FRG194510-BL 45° Fitting, -10AN Hose to 1/2" MPT

Series 3000 Hose Ends

The Series 3000 hose ends use a "cutter" method of hose attachment as the socket draws the hose over the nipple and into
the cutter. The seal is formed by the cutter embedding itself into the end of the hose. Designed exclusively for use with
Series 3000 hose. Offered with black or blue/red finish.
Blue/Red Blue/Red
Hose Size Black Part No. Part No. Hose Size Black Part No. Part No.
Straight 90° Bent Tube
-4 FRG100104-BL — -4 FRG109004-BL —
-6 FRG100106-BL FRG100106 -6 FRG109006-BL —
-8 FRG100108-BL — -10 FRG109010-BL —
-10 FRG100110-BL FRG100110 -12 FRG109012-BL —
-12 FRG100112-BL — -16 FRG109016-BL —
-16 FRG100116-BL — -20 FRG109020-BL —
-20 FRG100120-BL — 90° Low-Profile
45° Bent Tube -6 FRG109106-BL —
-10 FRG104510-BL — -8 FRG109108-BL —
-10 FRG109110-BL —
-12 FRG109112-BL —
Series 3000 Stainless Race Hose
Engineered exclusively for use with Series 3000 hose ends, aerospace-quality hose is compatible with all hydrocarbon and
alcohol-based fuels, along with synthetic and petroleum-based lubricants. Hose features an operating range of -40°F to
300°F, and combines a CPFE inner liner with two layers of woven stainless steel.
Working Vacuum
AN Size Hose I.D. Pressure Rating 3' Length 6' Length 10' Length 20' Length
-4 7/32" 1500 27" — FRG706004 — —
-6 11/32" 1500 27" FRG703006 FRG706006 FRG710006 FRG720006
-8 7/16" 1250 27" FRG703008 — FRG710008 FRG720008
-10 9/16" 1250 27" FRG703010 — FRG710010 —
-12 11/16" 1000 27" FRG703012 FRG706012 — —

FRG703006
Premium Black Nylon Race Hose
Designed for use with FPS Series 2000 hose ends, black nylon race hose incorporates a synthetic rubber
core that has an operational range of -40° to 300°F and up to 500 PSI of working pressure, allowing for use
with most oils, coolants, and fuels. Lightweight and durable, braided nylon hose is reinforced with a single
braid of bright corrosion-resistant type 302 stainless steel wire braid for added strength.
Note: Hose is not intended for use with 3000 Series hose ends.
Working Vacuum Min. Bend
Hose Size I.D. Pressure Rating Radius 3' Length 6' Length 10' Length 15' Length 20' Length
-4 7/32" 500 28" 2.0" FRG840304 FRG840604 FRG841004 FRG841504 FRG842004
-6 11/32" 500 28" 2.5" FRG840306 FRG840606 FRG841006 FRG841506 FRG842006
-8 7/16" 500 28" 3.5" FRG840308 FRG840608 FRG841008 FRG841508 FRG842008
-10 9/16" 500 28" 4.0" FRG840310 FRG840610 FRG841010 FRG841510 FRG842010
-12 11/16" 350 28" 4.5" FRG840312 FRG840612 FRG841012 FRG841512 FRG842012
-16 7/8" 350 28" 5.0" FRG840316 FRG840616 FRG841016 FRG841516 FRG842016

EZ Street Hose EZ Street Hose Ends

Manufactured to SAE 30R9 Compatible with a wide range of fuels
specifications, hose is compatible including pump gas, E85, E98, ethanol, diesel,
with all of today’s available pump and methanol, hose ends utilize a single hose
fuels including ethanol, diesel, and retention barb made to SAE specifications,
methanol fuels. The nitrile-based which allows compatibility with virtually any
tube prevents 99% of hydrocarbon fuel vapors from SAE 30R9 or 30R10 low-permeation fuel hose. Popularly
escaping, while the Aramid reinforcing braid keeps used with EZ Street 30R9 hose. Double-swivel design
the hose from collapsing. Suitable for applications allows clocking as desired. Offered in black only.
up to 175 PSI with a temperature range of -29° to Size Straight 45° Tube 90° Tube 120° Tube 180° Tube
275°F. -6 FRG750106-BL FRG754506-BL FRG759006-BL FRG751206-BL FRG751806-BL
Size 10' Length 15' Length 20' Length -8 FRG750108-BL — FRG759008-BL — —
-6 FRG731006 FRG731506 FRG732006

2023 - 2024 HOT ROD AND EARLY MUSCLE 213

Series 2000 Pro-Flow Hose Ends
Reusable, Pro-Flow hose ends utilize a single-nipple, which allows the socket to draw the hose over the long, tapered nipple,
effectively sealing the hose between the inside of the socket and the outside of the nipple. Offered in black or blue/red
anodized finishes.

Blue/Red Hose Blue/Red

Hose Size Black Part No. Part No. Size Black Part No. Part No.
Straight 90°
-4 FRG220104-BL FRG220104 -4 FRG229004-BL FRG229004
-6 FRG220106-BL FRG220106 -6 FRG229006-BL FRG229006
-8 FRG220108-BL FRG220108 -8 FRG229008-BL FRG229008
-10 FRG220110-BL FRG220110 -10 FRG229010-BL FRG229010
-12 FRG220112-BL FRG220112 -12 FRG229012-BL FRG229012
-16 FRG220116-BL FRG220116 -16 FRG229016-BL FRG229016
30° 120°
-4 FRG223004-BL — -4 FRG231204-BL FRG231204
-6 FRG223006-BL FRG223006 -6 FRG231206-BL FRG231206
-8 FRG223008-BL FRG223008 -8 FRG231208-BL FRG231208
-10 FRG223010-BL — -10 FRG231210-BL FRG231210
-12 FRG223012-BL FRG223012 -12 FRG231212-BL FRG231212
-16 FRG223016-BL — -16 FRG231216-BL —
45° 150°
-4 FRG224504-BL FRG224504 -4 FRG231504-BL —
-6 FRG224506-BL FRG224506 -6 FRG231506-BL FRG231506
-8 FRG224508-BL FRG224508 -8 FRG231508-BL —
-10 FRG224510-BL FRG224510 -10 FRG231510-BL FRG231510
-12 FRG224512-BL FRG224512 -12 FRG231512-BL FRG231512
-16 FRG224516-BL FRG224516 -16 FRG231516-BL —
60° 180°
-4 FRG226004-BL — -4 FRG231804-BL FRG231804
-6 FRG226006-BL FRG226006 -6 FRG231806-BL FRG231806
-8 FRG226008-BL FRG226008 -8 FRG231808-BL FRG231808
-10 FRG226010-BL FRG226010 -10 FRG231810-BL FRG231810
-12 FRG226012-BL FRG226012 -12 FRG231812-BL FRG231812
-16 FRG226016-BL — -16 FRG231816-BL —

Series 2000 Expander Pro-Flow Hose Ends Series 2000 Reducer Pro-Flow Hose Ends
Desirable where space is at a premium and it becomes Used where it becomes necessary to change from one
necessary to change from one hose size to the next larger hose size to the next smaller size. Hose ends utilize a
size. Hose ends utilize a single-nipple design, allowing the single- nipple design of hose attachment, allowing the
socket to draw over the hose between the inside of the socket to draw over the hose between the inside of the
socket and the outside of the nipple. socket and the outside of the nipple..
Black Blue/Red Black Blue/Red
Description Description
Part No. Part No. Part No. Part No.
Straight Straight
-6 Nut x -8 Hose — FRG220105 -8 Nut x -6 Hose — FRG220107
-10 Nut x -12 Hose — FRG220111 -10 Nut x -8 Hose — FRG220109
60° 45°
-12 Nut x -16 Hose FRG226013-BL — -10 Nut x -8 Hose — FRG224509
90° 90°
-6 Nut x -8 Hose — FRG229005 -8 Nut x -6 Hose — FRG229007
-10 Nut x -12 Hose — FRG229011 -10 Nut x -8 Hose — FRG229009
-12 Nut x -16 Hose — FRG229013 120°
120° -8 Nut x -6 Hose FRG231207-BL —
-6 Nut x -8 Hose FRG231205-BL FRG231205 150°
-12 Nut x -16 Hose FRG231213-BL FRG231213 -8 Nut x -6 Hose FRG231507-BL —
180° -10 Nut x -8 Hose FRG231509-BL —
-10 Nut x -12 Hose FRG231811-BL — 180°
-8 Nut x -6 Hose FRG231807-BL —

214 2023 - 2024 HOT ROD AND EARLY MUSCLE

Real-Street Hose Ends
Fully reusable hose ends, engineered for use with PTFE hose, eliminates permeation issues common to aftermarket racing
hose. Hose ends include a double-swivel design and have a bright, black anodized finish.
Part No. Hose Size Part No. Hose Size Part No. Hose Size
Straight 60° 150°
FRG680104-BL -4 FRG686006-BL -6 FRG681506-BL -6
FRG680106-BL -6 FRG686008-BL -8 FRG681508-BL -8
FRG680108-BL -8 FRG686010-BL -10 FRG681510-BL -10
FRG680110-BL -10 FRG686012-BL -12 FRG681512-BL -12
FRG680112-BL -12 90° 180°
30° FRG689006-BL -6 FRG681806-BL -6
FRG683006-BL -6 FRG689008-BL -8 FRG681808-BL -8
FRG683008-BL -8 FRG689010-BL -10 FRG681810-BL -10
45° FRG689012-BL -12 FRG681812-BL -12
FRG684506-BL -6 120°
FRG684508-BL -8 FRG681206-BL -6
FRG684510-BL -10 FRG681208-BL -8
FRG684512-BL -12 FRG681210-BL -10
FRG681212-BL -12

6000 Series PTFE Hose

Durable PTFE hose has the ability to endure high temperatures and pressures, while cycling over and over without failure.
Hose is well suited for use with engine, transmission, brake, or power steering lubricants, and is fully compatible with nitrous
oxide. Offered with or without black outer covering.
AN Size Hose I.D. Cover 3' Length 6' Length 10' Length 15' Length 20' Length
-6 5/16" None FRG603006 FRG606006 FRG601006 FRG601506 FRG602006
-6 5/16" Black FRG603026 FRG606026 FRG601026 FRG601526 FRG602026
-8 13/32" None FRG603008 FRG606008 FRG601008 FRG601508 FRG602008
-8 13/32" Black FRG603028 FRG606028 FRG601028 FRG601528 FRG602028
-10 1/2" None FRG603010 FRG606010 FRG601010 FRG601510 FRG602010

AN Flare Adapters AN Flare Adapters

“A” “B” Black Blue “A” “B”
Black Blue Dash Dash Part No. Part No. Dash Size Dash Size
Part No. Part No. Size Size Aluminum Female Swivel
Aluminum Union FRG496103-BL FRG496103 -3 -3
— FRG581503* -3 -3 FRG496104-BL FRG496104 -4 -4
FRG481503-BL FRG481503 -3 -3 FRG496106-BL FRG496106 -6 -6
FRG481504-BL FRG481504 -4 -4 A B A
FRG496107-BL FRG496107 -6 -8
FRG481506-BL FRG481506 -6 -6 FRG496108-BL FRG496108 -8 -8
FRG481508-BL FRG481508 -8 -8 FRG496109-BL FRG496109 -8 -10 A
FRG481510-BL FRG481510 -10 -10 FRG496110-BL FRG496110 -10 -10
FRG481512-BL FRG481512 -12 -12 A B
FRG496112-BL FRG496112 -12 -12
FRG481516-BL FRG481516 -16 -16 FRG496116-BL — -16 -16 B
Aluminum 90° Union Aluminum 45° Female Coupler
FRG482103-BL FRG482103 -3 -3 — FRG496206 -6 -6
A A
FRG482104-BL — -4 -4 — FRG496208 -8 -8 B
FRG482106-BL FRG482106 -6 -6 FRG496212-BL — -12 -12
FRG482108-BL FRG482108 -8 -8 A FRG496216-BL — -16 -16
FRG482110-BL FRG482110 -10 -10 Aluminum 90° Female 90° Coupler A
FRG482112-BL — -12 -12 FRG496306-BL FRG496306 -6 -6
B
— FRG482116 -16 -16 FRG496308-BL FRG496308 -8 -8 B
Aluminum Male Reducer — FRG496310 -10 -10
FRG491902-BL — -3 -4 B — FRG496312 -12 -12 B
FRG491906-BL FRG491906 -4 -6 Aluminum 90° Female Tube-Style Coupler
FRG491912-BL FRG491912 -6 -8 FRG496321-BL — -4 -4 A
A B
FRG491913-BL — -4 -10 FRG496317-BL — -6 -6
FRG491914-BL FRG491914 -6 -10 FRG496318-BL — -8 -8 A
FRG491915-BL FRG491915 -8 -10 FRG496319-BL — -10 -10
FRG491916-BL — -4 -12 FRG496320-BL — -20 -20
— FRG491918 -6 -12 Aluminum Swivel Reducer
A B
FRG491919-BL — -8 -12 FRG497204-BL FRG497204 -3 -4
FRG491920-BL FRG491920 -10 -12 FRG497206-BL FRG497206 -4 -6
FRG491922-BL — -10 -16 FRG497218-BL FRG497218 -4 -8
FRG491923-BL FRG491923 -12 -16 FRG497208-BL FRG497208 -6 -8
*Signifies steel fitting. FRG497210-BL FRG497210 -6 -10 A B
FRG497211-BL FRG497211 -8 -10
FRG497212-BL FRG497212 -8 -12
FRG497213-BL FRG497213 -10 -12
A B
FRG497216-BL FRG497216 -10 -16
FRG497217-BL FRG497217 -12 -16

2023 - 2024 HOT ROD AND EARLY MUSCLE 215

AN Flare Adapters - Continued AN Flare Bulkhead Adapters
“A” “A” “B”
Black Blue Dash “B” Black Blue Dash Dash
Part No. Part No. Size Dash Size Part No. Part No. Size Size
Aluminum Swivel Flare Expander Aluminum Straight Bulkhead
A B
FRG497304-BL FRG497304 -3 -4 FRG483203-BL FRG483203 -3 -3
FRG497306-BL FRG497306 -4 -6 A B FRG483204-BL FRG483204 -4 -4
FRG497308-BL FRG497308 -6 -8 FRG483206-BL FRG483206 -6 -6
FRG497310-BL FRG497310 -8 -10 FRG483208-BL FRG483208 -8 -8 A B
FRG497312-BL FRG497312 -10 -12 FRG483210-BL FRG483210 -10 -10
FRG497316-BL — -12 -16 A B FRG483212-BL FRG483212 -12 -12
FRG497320-BL FRG497320 -16 -20 FRG483216-BL — -16 -16 A
Aluminum Female to Male 90° Swivel FRG483220-BL — -20 -20
FRG498101-BL FRG498101 -3 -3 Aluminum 45° Bulkhead
FRG498102-BL — -4 -4 FRG483703-BL — -3 -3 B
FRG498104-BL — -8 -8 A Aluminum 90° Bulkhead
FRG498105-BL — -10 -10 FRG483303-BL FRG483303 -3 -3
A
FRG498106-BL — -12 -12 FRG483304-BL FRG483304 -4 -4
FRG498108-BL — -16 -16 FRG483306-BL FRG483306 -6 -6
FRG483308-BL FRG483308 -8 -8 A
Aluminum Female to Male 45° Swivel B
— FRG498001 -3 -3 FRG483310-BL FRG483310 -10 -10 B
— FRG498002 -4 -4 FRG483312-BL — -12 -12
FRG498003-BL FRG498003 -6 -6 B FRG483316-BL — -16 -16
B
— FRG498004 -8 -8 “A” “B” “C”
— FRG498005 -10 -10 Black Blue Dash Dash Dash
FRG498008-BL — -16 -16 A Part No. Part No. Size Size Size
Aluminum Male to Male 90° Swivel Aluminum Bulkhead Tee on the Side
FRG499268-BL — -6 -6 (3/4"-16) FRG483403-BL FRG483403 -3 -3 -3
FRG483404-BL — -4 -4 -4 A B
FRG499207-BL — -8 -8 (9/16"-18)
FRG499208-BL — -8 -8 (3/4"-16) FRG483406-BL — -6 -6 -6
FRG499210-BL — -10 -10 (7/8"-14) FRG483408-BL FRG483408 -8 -8 -8
FRG499212-BL — -12 -12 (1-1/16"-12) A FRG483410-BL — -10 -10 -10 C
B
FRG499213-BL — -12 -10 (7/8"-14) Aluminum Bulkhead Tee on the Run
FRG480403-BL FRG480403 -3 -3 -3 C
— FRG580403* -3 -3 -3 B A
“A” “B” “C”
Black Blue Dash Dash Dash FRG480404-BL — -4 -4 -4
Part No. Part No. Size Size Size *Signifies steel fitting.
Aluminum Tee, Female Swivel on Run
FRG498302-BL FRG498302 -4 -4 -4 Black Blue
Part No. Part No. Dash Size
FRG498303-BL — -6 -6 -6 Fuel Cell Bulkhead
FRG498304-BL — -8 -8 -8 FRG483106-BL — -6
FRG498305-BL — -10 -10 -10 FRG483108-BL — -8
A B
FRG498306-BL — -12 -12 -12 FRG483110-BL — -10
FRG498308-BL — -16 -16 -16 FRG483112-BL — -12
Aluminum Tee, Female Swivel on Side Aluminum Bulkhead Nut
FRG498201-BL FRG498201 -3 -3 -3 C
FRG492403-BL FRG492403 -3
FRG498202-BL FRG498202 -4 -4 -4 FRG492404-BL FRG492404 -4
FRG498203-BL FRG498203 -6 -6 -6 A FRG492406-BL FRG492406 -6
B
FRG498204-BL FRG498204 -8 -8 -8 FRG492408-BL FRG492408 -8
Aluminum Tee FRG492410-BL FRG492410 -10
FRG482403-BL FRG482403 -3 -3 -3 FRG492412-BL FRG492412 -12
FRG482404-BL FRG482404 -4 -4 -4 C FRG492416-BL — -16
FRG482406-BL FRG482406 -6 -6 -6 FRG492420-BL — -20
FRG482408-BL FRG482408 -8 -8 -8
FRG997408-BL* — -8 -8 -8
FRG482410-BL FRG482410 -10 -10 -10 A Nylon Sealing Washers
B
FRG482412-BL FRG482412 -12 -12 -12 Part No. Description
FRG482416-BL FRG482416 -16 -16 -16 FRG999126 9/16" I.D. (-6AN), 10-Pack
*Signifies fitting with 1/8" FPT port. FRG999128 3/4" I.D. (-8AN), 10-Pack
C FRG999130 7/8" I.D. (-10AN), 10-Pack
FRG999132 1-1/16" I.D. (-12), 10-Pack
Aluminum Hose Barb to AN Adapters
Black Blue Hose AN
Part No. Part No. Size Size
FRG484104-BL FRG484104 1/4" -4
FRG484106-BL FRG484106 3/8" -6
FRG494108-BL FRG484108 1/2" -8
FRG484110-BL — 5/8" -10
FRG484112-BL — 3/4" -12

216 2023 - 2024 HOT ROD AND EARLY MUSCLE

AN Caps and Plugs AN Flare to ORB Adapters
Black Blue Black Part No. Blue Part No. “A” Dash Size “B” SAE Size
Part No. Part No. Dash Size Aluminum O-Ring Boss
Aluminum Flare Cap FRG495124-BL — -4 3/8"-24 (-3) A B
FRG492903-BL FRG492903 -3 FRG495125-BL — -4 7/16"-20 (-4)
FRG492904-BL FRG492904 -4 FRG495110-BL — -4 9/16"-18 (-6)
FRG492906-BL FRG492906 -6 FRG495111-BL — -4 3/4"-16 (-8)
FRG492908-BL FRG492908 -8 FRG495112-BL — -4 7/8"-14 (-10)
FRG492910-BL FRG492910 -10 FRG495100-BL FRG495100 -6 9/16"-18 (-6)
FRG492912-BL FRG492912 -12 FRG495101-BL FRG495101 -6 3/4"-16 (-8)
FRG492916-BL FRG492916 -16 FRG495113-BL FRG495113 -6 7/8"-14 (-10)
FRG492920-BL — -20 FRG495114-BL — -6 1-1/16"-12 (-12)
Aluminum Flare Plug FRG495102-BL FRG495102 -8 9/16"-18 (-6)
FRG480603-BL FRG480603 -3 FRG495103-BL FRG495103 -8 3/4"-16 (-8)
FRG480604-BL FRG480604 -4 FRG495104-BL FRG495104 -8 7/8"-14 (-10)
FRG480606-BL FRG480606 -6 FRG495115-BL — -8 1-1/16"-12 (-12) A B
FRG480608-BL FRG480608 -8 FRG495116-BL — -8 1-5/16"-12 (-16)
FRG480610-BL FRG480610 -10 FRG495105-BL FRG495105 -10 3/4"-16 (-8)
FRG480612-BL FRG480612 -12 FRG495106-BL FRG495106 -10 7/8"-14 (-10)
FRG480620-BL — -20 FRG495107-BL FRG495107 -10 1-1/16"-12 (-12)
Aluminum Port Plug (O-Ring Included) FRG495117-BL — -10 1-5/16"-12 (-16)
FRG481403-BL FRG481403 -3 FRG495122-BL — -12 3/4"-16 (-8)
FRG481406-BL FRG481406 -6 FRG495108-BL FRG495108 -12 7/8"-14 (-10)
FRG481408-BL FRG481408 -8 FRG495109-BL FRG495109 -12 1-1/16"-12 (-12)
FRG481410-BL FRG481410 -10 FRG495118-BL — -12 1-5/16"-12 (-16)
FRG481412-BL — -12 FRG495120-BL — -16 1-1/16"-12 (-12)
Aluminum Port Plug (O-Ring Included) with 1/8" FPT FRG495119-BL — -16 1-5/16"-12 (-16)
FRG481403-BL FRG481403 -3 FRG495123-BL — -20 1-5/16"-12 (-16)
FRG481426-BL — -6
FRG481428-BL — -8 ORB to ORB Adapters
A B
FRG481430-BL — -10 Black Part No. "A" Dash Size "B" Dash Size
Aluminum Socket Hex Port Plug FRG494110-BL -10 -10
FRG481304-BL — -3 FRG494111-BL -12 -12
FRG481306-BL — -6 FRG494112-BL -10 -8
FRG481308-BL — -8
FRG481310-BL — -10 AN 90° Swivel to AN Straight Thread
FRG481312-BL — -12 Part No. Hose Size AN Thread
Aluminum Tube Nut FRG499268-BL -6 3/4"-16 (-8)
FRG481803-BL FRG481803 -3 FRG499207-BL -8 9/16"-18 (-6)
FRG481804-BL FRG481804 -4 FRG499210-BL -10 7/8"-14 (-10)
FRG481806-BL FRG481806 -6 FRG499212-BL -12 1-1/16"-12 (-12)
FRG481808-BL FRG481808 -8 FRG499213-BL -12 7/8"-14 (-10)
FRG481810-BL FRG481810 -10
FRG481812-BL* — -12 Viton O-Rings Sold in Packs of 10
Aluminum Tube Sleeve
Part No. Size
FRG481903-BL FRG481903 -3 FRG999108 -3
FRG481904-BL FRG481904 -4 FRG999109 -4
FRG481906-BL FRG481906 -6 FRG999110 -6
FRG481908-BL FRG481908 -8 FRG999112 -10
FRG481910-BL FRG481910 -10 FRG999113 -12
FRG481912-BL** — -12
* Most tube nuts are also available in 10-packs by adding "-10" to part no. Weld Bungs
** Most tube sleeves are also available in 10-packs by adding "-10" to part no. Often required when fabricating breather tanks, etc. Offered
in aluminum or steel.
Billet Aluminum Flare to Aluminum Part No.
FRG497104
Steel Part No.
FRG597104
AN Size
-4
Flare Y Fittings FRG497106 FRG597106 -6
Fittings have a bright black anodized FRG497108 FRG597108 -8
finish unless noted. FRG497110 FRG597110 -10
FRG497112 FRG597112 -12
Part No. Description
FRG900604* -4AN Male, All Weld Bungs with 1.0" Dia. Step
FRG900606-BL -6AN Male, All
Part No. Size
FRG900607-BL -6AN Male Inlet x -4AN Male Outlets
FRG499558 -8 Male (3/4"-16)
FRG900608-BL -8AN Male, All
FRG499560 -10 Male (7/8"-14)
FRG900609-BL -8AN Male Inlet x -6AN Male Outlets
FRG499562 -12 Male (1-1/16"-12)
FRG900611-BL -10AN Male Inlet x -8AN Male Outlets
FRG499566 -16 Male (1-5/16"-12)
FRG900612-BL -12AN Male Inlet x -12AN Male Outlets
FRG900617-BL -16AN Male Inlet x -12AN Male Outlets Weld Bung with .750" Dia. Step
*Signifies blue anodized fitting. Part No. Size
FRG499506 3/8" FPT

2023 - 2024 HOT ROD AND EARLY MUSCLE 217

Oil Pressure Adapters Automatic Transmission Cooling
Part No. Description Line Fittings
FRG481710-BL -10AN x 1/2" NPT, 3.25" Long Allows converting cooling lines to popular
FRG481712-BL -12AN x 1/2" NPT, 3.25" Long
AN-sizing. Offered in black only.
FRG481713-BL -10AN x 1/2" NPT, 4.4" Long
FRG481714-BL -12AN x 1/2" NPT, 4.4" Long Part No. Description
FRG491930-BL -10AN x -10AN ORB, 3.25" Long FRG481670-BL -6AN x 1/4" NPS, Most GM & Aftermarket Case Powerglide
FRG581690 -4AN x 1/8" NPT, 2.00" Long Steel FRG481672-BL -6AN x 1/4" NPS, for Rear of GM 4L80E Trans.
FRG481673-BL -8AN x 1/4" NPS, Most GM & Aftermarket Case Powerglide

Steel AN to NPT Adapters Metric to AN Adapters

Part No. Hose Size NPT Size AN Metric Black Blue
FRG581603 -3 1/8" Size Size Part No. Part No.
FRG581605 -4 1/4" -4 10 x 1.0 FRG460408-BL —
-6 10 x 1.25 FRG460606-BL —
-8 12 x 1.5 FRG460812-BL —
Replacement Olives -8 14 x 1.5 — FRG460814
Replacement aluminum olives are designed for use with
Fragola PTFE hose ends. Sold each.
Part No. Description
FRG999306 -6AN
FRG999308 -8AN
FRG999310 -10AN
FRG999312 -12AN

Aluminum AN to NPT Adapters

Straight Black Straight Blue 45° Black 45° Blue 90° Black 90° Blue
Hose Size NPT Size Part No. Part No. Part No. Part No. Part No. Part No.
-3 1/8" FRG481603-BL FRG481603 FRG482303-BL FRG482303 FRG482203-BL FRG482203
-3 1/4" FRG481634-BL FRG481634 — — FRG482234-BL FRG482234
-4 1/8" FRG481604-BL FRG481604 FRG482304-BL FRG482304 FRG482204-BL FRG482204
-4 1/4" FRG481605-BL FRG481605 FRG482344-BL FRG482344 FRG482244-BL FRG482244
-4 3/8" FRG481644-BL FRG481644 — FRG482338 — FRG482238
-6 1/8" FRG481662-BL FRG481662 FRG482362-BL FRG482362 FRG482262-BL FRG482262
-6 1/4" FRG481606-BL FRG481606 FRG482306-BL FRG482306 FRG482206-BL FRG482206
-6 3/8" FRG481666-BL FRG481666 FRG482366-BL FRG482366 FRG482266-BL FRG482266
-6 1/2" FRG481668-BL FRG481668 FRG482368-BL FRG482368 FRG482268-BL FRG482268
-8 1/4" FRG481607-BL FRG481607 FRG482307-BL FRG482307 FRG482207-BL FRG482207
-8 3/8" FRG481608-BL FRG481608 FRG482308-BL FRG482308 FRG482208-BL FRG482208
-8 1/2" FRG481688-BL FRG481688 FRG482388-BL FRG482388 FRG482288-BL FRG482288
-8 3/4" FRG481617-BL FRG481617 — — — —
-10 3/8" FRG481611-BL FRG481611 FRG482311-BL FRG482311 FRG482211-BL FRG482211
-10 1/2" FRG481610-BL FRG481610 FRG482310-BL FRG482310 FRG482210-BL FRG482210
-10 3/4" FRG481609-BL FRG481609 — — FRG482209-BL FRG482209
-12 3/4" FRG481612-BL FRG481612 FRG482312-BL FRG482312 FRG482212-BL —
-12 1/2" FRG481613-BL FRG481613 FRG482313-BL FRG482313 FRG482213-BL FRG482213
-16 3/4" FRG481615-BL FRG481615 — — FRG482215-BL —
-16 1" FRG481616-BL FRG481616 — — FRG482216-BL FRG482216

Aluminum AN to NPT Adapters - Aluminum AN to NPT Adapters - Continued

Continued Black “A” “B”
Dash
“A” Part No. NPT Size
Black Blue “B” Size A
Dash
Part No. Part No. NPT Size Aluminum 90° Swivel to Male NPT
Size
Aluminum Female AN Swivel to Pipe FRG499104-BL -4 1/8"
— FRG499303 -3 1/8" FRG499144-BL -4 1/4"
A B FRG499162-BL -6 1/8"
— FRG499304 -4 1/8"
— FRG499344 -4 1/4" FRG499106-BL -6 1/4"
A
FRG499306-BL FRG499306 -6 1/4" FRG499166-BL -6 3/8" B
— FRG499362 -6 1/8" FRG499168-BL -6 1/2"
A B
— FRG499366 -6 3/8" FRG499107-BL -8 1/4"
— FRG499307 -8 1/4" FRG499108-BL -8 3/8"
FRG499308-BL FRG499308 -8 3/8" FRG499111-BL -10 3/8"
FRG499310-BL FRG499310 -10 1/2" FRG499110-BL -10 1/2"
B
FRG499311-BL — -10 3/8" FRG499113-BL -12 1/2"

218 2023 - 2024 HOT ROD AND EARLY MUSCLE

 Black Blue “A”
Dash
“B”
Dash
“C”
NPT
Carburetor and Fuel Injection Adapters
Part No. Part No. Size Size Size Blue Part
Aluminum Tee Pipe On-The-Side Black Part No. Description
No.
FRG482503-BL FRG482503 -3 -3 1/8" A C FRG491940-BL — -6AN x 1/2"-20 Female I.F.
— FRG482504 -4 -4 1/8" FRG491942-BL — -6AN x 5/8"-18 Female I.F.
— FRG482506 -6 -6 1/4" B FRG491948-BL FRG491948 -8AN x 7/8"-20 Male, Holley 4150
— FRG482508 -8 -8 3/8" FRG491950-BL FRG491950 -6AN x 5/8"-20 Male, Carter
FRG482510-BL — -10 -10 1/2" FRG491951-BL FRG491951 -6AN x 9/16"-24 Male, Holley/Demon
Aluminum Tee Pipe On-The-Run FRG491952-BL FRG491952 -6AN x 7/8"-20 Male, Holley 4150
FRG482603-BL FRG482603 -3 -3 1/8" FRG491955-BL FRG491955 -6AN x 1/2"-20 Male, 5/16" Tube I.F.
— FRG482604 -4 -4 1/8" A C FRG491956-BL FRG491956 -6AN x 5/8"-18 Male, 3/8" Tube I.F.
— FRG482608 -8 -8 3/8" FRG491957-BL FRG491957 -8AN x 7/8"-20 Male, Holley
B FRG491960-BL FRG491960 -6AN x 1"-20 Male, Rochester Q-Jet
FRG491962-BL FRG491962 -6AN x 14mm x 1.5 Male, Fuel Inj.
NPT Adapters FRG491963-BL FRG491963 -6AN x 16mm x 1.5 Male, Fuel Inj.
FRG491964-BL FRG491964 -6AN x 18mm x 1.5 Male, Fuel Inj.
“A” “B” FRG491965-BL FRG491965 -8AN x 1"-20 Male, Rochester Q-Jet
Black Blue NPT NPT
Part No. Part No. FRG491966-BL FRG491966 -8AN x 9/16"-24 Male, Holley/Demon
Size Size
Aluminum NPT Reducer B A FRG491967-BL FRG491967 -8AN x 5/8"-20 Male, Carter/Edelbrock
FRG491201-BL FRG491201 1/8" 1/4" FRG491971-BL FRG491971 -6AN x 16mm x 1.5 Female, O-Ring Seal
FRG491202-BL FRG491202 1/4" 3/8" -8AN x 7/8"-20 Holley Carb Adapter, Female
FRG491974-BL —
FRG491203-BL FRG491203 1/8" 3/8" Nut
FRG491204-BL FRG491204 3/8" 1/2" FRG491975-BL FRG491975 -6AN x 7/8"-20 Male, 3" Long
FRG491205-BL FRG491205 1/4" 1/2" B A FRG491976-BL FRG491976 -8AN x 7/8"-20 Male, 3" Long
FRG491206-BL FRG491206 1/8" 1/2" — FRG491977 -6AN x 9/16"-24 Male, 3" Long
FRG491207-BL — 1/2" 3/4" FRG491978-BL — -8AN x 9/16"-24 Male, 3" Long
FRG491208-BL — 3/8" 3/4" FRG491980-BL FRG491980 7/8"-20 Inlet Plug, Blank
FRG491209-BL — 1/4" 3/4" FRG491989-BL — -6AN x LT-1, 3/8" Line, Feed Side, Fuel Inj.
FRG491990-BL — -6AN x LT-1, 5/16" Return, Fuel Inj.
Black Part No. Blue Part No. NPT Size FRG491992-BL — -8AN LT-1, FI 3/8" Line, Feed Side
Aluminum Male NPT Nipple
FRG491101-BL FRG491101 1/8"
FRG491102-BL — 1/4" Premium Fuel
FRG491103-BL
FRG491104-BL
FRG491103
FRG491104
3/8"
1/2"
Line Kits
Aluminum Female NPT Coupler Assembled fuel lines include
FRG491001-BL FRG491001 1/8" high-flow black anodized
Aluminum Female to Male 45° Elbow aluminum adapters, braided FRG920002-BL
FRG491501-BL — 1/8" stainless steel braided
Aluminum Internal Allen NPT Plug line, EZ system of detachment, and a plugged cap with a
FRG493201-BL — 1/16" provision for a fuel pressure gauge. Gauge not included.
FRG493202-BL FRG493202 1/8"
Blue/Red Part
FRG493203-BL FRG493203 1/4" Black Part No. Description
No.
FRG493204-BL FRG493204 3/8" -6AN x 7/8"-20, Dual-Inlet Holley 4150,
FRG493205-BL FRG493205 1/2" FRG920002-BL FRG920002
9.3" Center Distance
FRG493206-BL FRG493206 3/4" -8AN x 7/8"-20, Dual-Inlet Holley 4150,
FRG920003-BL FRG920003
FRG493207-BL — 1" 9.3" Center Distance
Aluminum Hex NPT Plug -6AN x 7/8"-20, Dual-Inlet Holley 4500,
— FRG920004
FRG493301-BL — 1/8" 11.35" Center Distance
— FRG493302 1/4" -8AN x 7/8"-20, Dual-Inlet Holley 4500,
FRG920005-BL —
FRG493303-BL FRG493303 3/8" 11.35" Center Distance
FRG493304-BL FRG493304 1/2" -6AN x 9/16"-24, Demon, 9.5" Center
FRG920006-BL —
FRG493306-BL FRG493306 3/4" Distance
-8AN x 9/16"-24, Demon, 9.5" Center
FRG920007-BL —
Distance

Aluminum Hose Barb to Pipe Adapter

Black Blue Hose NPT Premium Black-on-
Part No.
FRG484004-BL
Part No.
FRG484004
Size
1/4"
Size
1/8"
Black Fuel Line Kits
FRG484006-BL FRG484006 3/8" 1/4" Assembled fuel line kits use
FRG484008-BL FRG484008 1/2" 3/8" high-flow black anodized
FRG484010-BL FRG484010 5/8" 1/2" aluminum adapters black FRG930002-BL
FRG484012-BL FRG484012 3/4" 3/4" nylon race hose, EZ system
of detachment, and a plugged cap with a provision for a
fuel pressure gauge. Gauge not included.
Part No. Description
FRG930002-BL -6AN x 7/8"-20 Dual-Inlet Holley 4150, 9.3" Center Distance
FRG930003-BL -8AN x 7/8"-20 Dual-Inlet Holley 4150, 9.3" Center Distance
FRG930006-BL -6AN x 9/16"-24, Demon, 9.5" Center Distance
-8AN x 7/8"-20, Dual-Inlet Holley 4500, 11.35" Center
FRG930005-BL
Distance

2023 - 2024 HOT ROD AND EARLY MUSCLE 219

Billet Fuel Filter Double Open-Ended
FRG960001-BL Wrench Set
Billet 6061-T6 FRG900100
aluminum fuel filter Durable, heat-treated
includes -6AN ports aluminum wrenches are
and a 40-micron element. Black powder-coated finish. Filter perfect for tightening
is 3-3/4" long x 1-3/4" O.D. and is sealed with Viton O-rings. aluminum AN fittings,
even in tight spaces.
Each wrench includes
two different angles for
Gauge Adapters ease of use. Set of five
includes -6, -8, -10, -12,
Black Part No. Blue Part No. Description
-4AN Male x -4AN Male Inline, 1/8" Female and -16AN.
FRG495000-BL FRG495000
NPT on Side
-6AN Male x -6AN Male Inline, 1/8" Female NPT
FRG495001-BL FRG495001
on Side Koul Tool
FRG495002-BL FRG495002
-6AN Male x 3/8" Male NPT Inline, 1/8" Female Specialized composite tool
NPT on Side eases the assembly of AN
-8AN Male x -8AN Male, Inline, 1/8" FPT on fittings to stainless steel
FRG495003-BL FRG495003
Side
braided hose. Simply open
FRG495004-BL FRG495004 -8AN Male x 3/8" NPT, Inline, 1/8" FPT on Side
clamshell of the tool, insert
-6AN Male x -6AN Female Inline, 1/8" Female
FRG495005-BL FRG495005
NPT on Side the socket, clamp the tool in a
-8AN Male x -8AN Female Inline, 1/8" Female vise or secure with Vise-Grips.
FRG495006-BL FRG495006
NPT on Side Proceed by pushing the hose
FRG495020-BL FRG495020 -3AN x 1/8" Female NPT, Straight through the opening with a
FRG495021-BL FRG495021 -4AN x 1/8" Female NPT, Straight twisting motion. Finish by removing FRG900510
FRG495022-BL FRG495022 -3AN x 1/8" Female NPT, 90° the assembly and tightening the
FRG495023-BL FRG495023 -4AN x 1/8" Female NPT, 90° fitting.
Part No. Description
FRG900510 Koul Tool, Fits -4, -6, -8
FRG900511 Koul Tool, Fits -10, -12, -16
Padded Line Clamps
Part No. Description
FRG900953 5/8", 10-Pack Hose Pressure Test Kit
FRG900954 3/4", 10-Pack
FRG900955 7/8", 10-Pack FRG900060
FRG900956 1", 5-Pack Handy kit allows the
FRG900958 1-1/2", 5-Pack quick testing of AN
hose assemblies. A
compressed air source
P.T.F.E. Hose Assemblies and water bath to
submerge assemblies is
Pre-assembled, -3AN hose assemblies save precious time
all that is needed to check
when plumbing brake systems.
for leaks. Kit includes
Part No. Description individual line testers
FRG310008 -3AN, 8" Long
for -3 through -16. Individual line testers may also be
FRG310016 -3AN, 16" Long
purchased separately.
FRG310020 -3AN, 20" Long
FRG310030 -3AN, 30" Long Part No. Hose Size
FRG310048 -3AN, 48" Long Individual Line Testers
FRG900663 -3
FRG900664 -4
FRG900666 -6
FRG900668 -8
FRG900670 -10
Brake Adapters FRG900672 -12
Part No. Description
FRG650103 Steel Banjo Adapter, -3 x 3/8"
FRG650115 Steel Banjo Adapter, -3 x 12mm 37° Flaring Tool
Steel Banjo Adapter, 1/8" Female NPT x 1/2", Chrysler
FRG650123
Master Cylinder FRG900500
FRG650124
Steel Banjo Adapter, 1/8" Female NPT x 9/16", Chrysler Economical flaring tool allows
Master Cylinder forming an AN specification 37°
FRG650155 Steel Banjo Bolt, 10mm x 1.0
JIC flare to 3/16" through 5/8"
FRG650157 9/16"-20 Banjo Bolt, Chrysler Master Cylinder
FRG650304 Steel Brake Adapter, -3 x 7/16"-24
diameter hard-line tubing.
FRG650310 Steel Brake Adapter, -3 x 10mm x 1.0 B.F.

220 2023 - 2024 HOT ROD AND EARLY MUSCLE

High-Performance Oil Filters
Filters feature an anti-drainback valve and a relief valve which functions as an internal bypass. When inlet pressure exceeds outlet
pressure, the valve opens and oil bypasses the filter. Filters have a maximum pressure of 200 PSI with a 22 PSI safety valve.
Max. Flow
Part No. Application(s) Dimensions O.D. x Ht. Thread Mic. Rat. Rate Burst PSI Gasket
FRAHP1 Ford/Chrysler 3-5/8" x 5-1/2" 3/4"-16 18 10 GPM 500 Inboard
FRAHP2 AMC/Buick/Olds 3-5/8" x 5-1/2" 13/16"-16 18 10 GPM 500 Inboard
FRAHP3 Ford/Chrysler 3-5/8" x 4" 3/4"-16 18 10 GPM 500 Inboard
FRAHP4 Chevrolet 3-5/8" x 5-1/2" 13/16"-16 18 10 GPM 325 Outboard
FRAHP6A* Remote Mt. 4-1/2" x 6-1/8" 1-1/2"-12 12 20 GPM 400 Outboard
FRAHP8 Chevrolet 3-5/8" x 4" 13/16"-16 18 10 GPM 325 Outboard
FRAHP16 Ford 4.6/5.4L, Dodge 5.7L 3-5/8" x 4" 22mm-1.25 — — — —
FRAHP18 GM LS3/LS7/LS9 3" x 3-38" 22mm-1.5 — — — —
FRAHP20 GM LS1/LS6 3" x 3-3/8" 13/16"-16 — — — —
*No anti-drain valve and no safety valve screen.

Popular Fram Oil Filters Standard Fuel Filters

Performance Part No. Description
Application Filter Standard Filter FRAG2 Plastic Housing with 5/16" Ends
Ford FRAHP1 FRAPH8A FRAG3 Plastic Housing with 3/8" Ends
Chevy, Long FRAHP4 — FRAG15 Steel Housing with 3/8" Ends
Chevy, Short — FRAPH30
Chrysler, 1959-86 FRAHP1 —
Buick, Olds, Pontiac V8 FRAHP2 FRAPH25

Frame Rail Extension for 1978-83 G-Body Cars Engine Mock Up—LS/LT Block
GFCFE-100 GFCGF-EJGM-LS
Simplify fabrication
work with this
lightweight mock-up
of Gen III/IV Vortec LS
Designed to replicate the longer driver's side frame engine block. Equipped
rail on 1984 and later GM B-Body cars, this bolt-on with all the proper
frame extension kit allows use of longer transmissions mounting holes, it
by providing the needed mounting points for the allows mounting of the
crossmember. Black powder-coated steel. Includes transmission, oil pan,
mounting hardware. motor mounts, headers, etc. to easily verify dimensions
and clearances without having to move a heavy engine.
Adjustable Transmission Mount for 1978-98 Black powder-coated steel construction is durable and
heat resistant, allowing fabrication of custom motor
Mustang mounts right on the "block".
GFCGF-FMATM
Make engine and
transmission swaps 1979-93 Mustang Billet Aluminum
easier with this adjustable Crossmember
transmission mount. With
1"–2" of movement and 1" GFCRCMFB
to over 2-1/2" of offset, it
helps avoid the hassle of
swap misalignment. Fits
1978-98 Ford Mustang
with SROD, T5, T45, TR-
3650, T56, TR6060, MT82, or TR3160 transmissions and This transmission crossmember provides unique G-Force
transmission crossmembers with a dual stud pattern with styling with the strength of billet aluminum. Direct
2-1/4" center spacing. Black powder-coated steel with a replacement for 1979-93 Ford Mustang Fox bodies, and
red polyurethane bushing. provides clearance for dual exhaust systems. The billet
construction eliminates the OEM style inserts, and bolts
in solid for a chassis-stiffening assembly. Natural finish.
Sold individually.
2023 - 2024 HOT ROD AND EARLY MUSCLE 221
Transmission Crossmembers
G-Force heavy-duty steel bolt-in transmission cross-members are
engineered with a patented double-hump design for use with true dual
exhaust systems without sacrificing ground clearance. Manufactured
from 2" x 3" boxed steel and 1/2" steel plate for added frame stiffening.
Black powder-coated finish. Includes new mounting hardware.
Purchase transmission mount separately. Works with stock mount.
Part No. Description
Ford
GFCRCM1L 1967-73 Mustang, With AOD, TREMEC
General Motors
GFCRCF1-400 1967-69 Camaro/Firebird, with TH400 Short Tail, TH200R4
GFCRCF1-700 1967-69 Camaro/Firebird, with TH700R4, 4L60, and Early 4L60E, TK0500/600
GFCRCF2E-400 1970-74 Camaro/Firebird, with TH400, 200R4
GFCRCF2E-4L80 1970-74 Camaro/Firebird, with 4L80, 4L80E
GFCRCF2E-700 1970-74 Camaro/Firebird, with 700R4, 4L60, and Early 4L60E
GFCRCF2E-T56 1970-74 Camaro/Firebird, with T56
GFCRCF2L-400 1975-81 Camaro/Firebird, Nova, Ventura with TH400, 200R4
GFCRCF2L-4L80 1975-81 Camaro/Firebird, Nova, Ventura with 4L80, 4L80E
GFCRCF2L-700 1975-81 Camaro/Firebird, Nova, Ventura with 700R4, 4L60, and Early 4L60E
GFCRCG-350 1978-88 Chevelle/Monte Carlo/Cutlass/Regal with TH350, Muncie, Powerglide, T-10, Super T-10, Saginaw, TH200
GFCRCG-400K 1978-88 Chevelle/Monte Carlo/Cutlass/Regal with TH400 Short Tail, TH200R4
GFCRCG-700 1978-88 Chevelle/Monte Carlo/Cutlass/Regal with 700R4, 4L60, and 4L60E, TK0500/600
GFCRCG-400 1978-88 Chevelle/Monte Carlo/Cutlass/Regal with TH400 Short Tail, TH200R4
GFCRCS-10-2 1967-72 Chevy C10, 2WD Pickup with 700R4, 4L60, 4L60E, 2004R, TH400, Powerglide, TH350, 4L80E, 6L80E, Muncie, T10, TKO, and T56
GFCRCS-10-3 1973-87 Chevy C10, 2WD Pickup with 700R4, 4L60, 4L60E, 2004R, TH400, Powerglide, TH350, 4L80E, 6L80E, Muncie, T10, TKO, and T56
GFCRCS-10 1982-05 GM S10/S15, TH350, Muncie, Powerglide, T-10, Super T-10, Saginaw, TH700R4, 4L60, 4L60E, TH200, TK0500/600
GFCRCF1-400 1968-74 Nova, with TH400 Short Tail, TH200R4
GFCRCF1-700 1968-74 Nova, with TH700R4, 4L60, and Early 4L60E, TK0500/600
GFCRCAE-NG-BLK * 1964-72 GS, Skylark, 442, Cutlass, F85, Grand Prix, GTO, LeMans, Tempest, Chevelle, Malibo, Monte Carlo with T-56
GFCRCAEC1-T56 1964-67 Convertibles GS, Skylark, Grand Prix, GTO, LeMans, Tempest, 442, Cutlass, F85, Chevelle, El Camino, Malibu with T-56
1968-72 GS, GTO, LeMans, Tempest, 442, Cutlass, F85, Skylark, Chevelle, El Camino, Malibu, Monte Carlo, with TH350, Muncie, Powerglide,
GFCRCAEC2
T-10, 700R4, 4L60, 4L60E, Th400, 200R4, Super T-10, Saginaw, TH200
GFCRCAEC2-4L80 1968-72 GS, GTO, LeMans, Tempest, 442, Cutlass, F85, Skylark, Chevelle, El Camino, Malibu, Monte Carlo, with 4L60E, 4L85E
GFCRCAL-4L80 1973-77 GS, GTO, LeMans, Tempest, 442, Cutlass, F85, Skylark, Chevelle, El Camino, Malibu, Monte Carlo, with 4L80E, 4L85E
GFCRCAL-700 1973-77 GS, GTO, LeMans, Tempest, 442, Cutlass, F85, Skylark, Chevelle, El Camino, Malibu, Monte Carlo, with 700R4, 4L60, 4L60E
1973-77 GS, GTO, LeMans, Tempest, 442, Cutlass, F85, Skylark, Chevelle, El Camino, Malibu, Monte Carlo, with TH350, Muncie, Powerglide, T-10,
GFCRCAL
700R4, 4L60, 4L60E, Th400, 200R4, Super T-10, Saginaw, TH200
1977-90 Caprice, Impala, Biscayne, Electra, Le Sabre, Catalina, Bonneville, Delta 88, Starfire, Delmont, Custom Cruiser, Estate Wagon,
GFCRCB3-400
Parisienne, Riviera, Safari with TH400 Short Tail, 2004R, 700R4 with B-Body Tailshaft Mount
1969-70 Bel-Air, Caprice, Impala, Biscayne, Electra, Le Sabre, Catalina, Bonneville, Delta 88, Starfire, Delmont, Grand Prix, Wildcat, Executive,
GFCRCBE-8L90
Dynamic 88, Jetstar 88, Kingswood with 8L90E Slip Yoke and OEM-Equipped TH400
GFCRCC10-2 1967-72 C10 2WD with 700R4, 4L60, 4L60E, 2004R, TH400, Powerglide, TH350, 4L80E, 6L80E, Muncie, T10, TKO, and T56
1973-87 C10 2WD with TH350, TH200, TH250, Muncie, T10, Super T10, Powerglide, Saginaw, 700R4 (Case mount trans only), 4L60, 4L40E, T5,
GFCRCC10-3
TH400 Short Tail, TH375, 2004R, 4L80E, 485E, T-56, TR6060, 6L80E Slip Yoke, 6L90E Slip Yoke, 8L90E Slip Yoke
GFCRCF1-4L80 1967-69 Camaro, Formula 400, Trans Am, Firebird and 1968-72 Ventura, Omega, Apollo with 4L80, 4L80E, 4L85, 4L85E
GFCRCG-350NG- 1978-88 Malibu, Monte Carlo, El Camino, Cutlass, Grand Prix, Regal, Century, LeMans, Caballero, Bonneville with TH350, Muncie, Powerglide,
BLK T-10, Super T-10, Saginaw, TH200
GFCRCG-700NG-BLK 1978-88 Malibu, Monte Carlo, El Camino, Cutlass, Grand Prix, Regal, Century, LeMans, Caballero, Bonneville with 700R4, 4L60, 4L60E
GFCRCG-400NG-
1984-88 Malibu, Monte Carlo, El Camino, Cutlass, Grand Prix, Regal, Century, LeMans, Caballero, Bonneville with TH400, 2004R
BLK
GFCRCG-8L90 1984-88 Malibu, Monte Carlo, El Camino, Cutlass, Grand Prix, Regal, Century, LeMans, Caballero, Bonneville with 8L90E Slip Yoke
GFCRCG-400NG-
1978-83 Malibu, Monte Carlo, El Camino, Cutlass, Grand Prix, Regal, Century, LeMans, Caballero, Bonneville with 8L90E Slip Yoke
BLK-8L90K
1962-67 Chevy II, Chevy II 100, Chevy II 300, Chevy II Nova, Chevy II Nova SS, Nova, Nova SS, Nova Super-Sport, Skylark, Apollo, Omega,
GFCRCNV-T56
Ventura, Ventura II, Phoenix with T56, 6L80E
GFCRCS-10-400 1982-2005 S10, S15, and Sonoma 2WD with TH400 Short Tail, 2004R
* Hardtops only—will not fit convertible.

222 2023 - 2024 HOT ROD AND EARLY MUSCLE

Stainless Tailpipe Tips
Gibson’s exclusive design features a
built-in clamp at the end of each tip. Easy
installation for a very clean, custom look.
Gibson Tips are 100% polished T-304
stainless steel which will dramatically
outlast chrome! Stainless steel delivers
the brilliant “show look” and will not chip, flake, or rust like chrome.
Overall
Part No. Inlet Size Outlet Size Length
Turndown Tip
Black Ceramic
GIB500384 3" 3-1/2" 12" Outlet Overall
GIB500415 1-1/2" 1-1/2" 10" Part No. Inlet Size Size Length
Angle Cut
Round Tip
GIB500379-B 3" 4" 12"
GIB500362 2-1/2" 3" 8"
Round Tip
GIB500392 2-1/2" 3-1/2" 6-1/2"
GIB500637-B 2-3/4" 4" 12"
GIB500395 2-1/4" 3-1/2" 12"
GIB500641-B 3" 4" 12"
GIB500419 2-1/2" 4" 12"
GIB500643-B 2-3/4" 4" 12"
GIB500420 2-3/4" 3-1/2" 10"
GIB500421 2-1/2" 4" 8"
GIB500554 3" 5" 12"
GIB500558 2-1/4" 4" 8"
Splash Tip
GIB500370 2-1/4" 3" 8"
GIB500361 2-1/2" 3" 8"
GIB500374 2-1/2" 3-1/2" 12"
GIB500372 2-3/4" 3-1/2" 12"
GIB500360 3" 3-1/2" 12"

Tubular Control Arms for 1967-69

F-Body Upper Arms with Del-A-Lum
Subframe Connectors Bushings
for 1967-79 GM F-Body GLOCTA79A
Tubular upper
GLO900 and lower front
control arms
increase camber
and improve roll
camber, keeping
the tires flat during
acceleration and cornering.
Tying the unibody chassis together improves all around Direct bolt-on upgrade for factory control arms, each set
performance and rigidity. Global West subframe is available with polyurethane or Del-A-Lum bushings for
connectors weld to the rear frame rail, instead of the stock coil spring or QA1 coil-over versions.
spring pocket, and bolt to the front subframe.

Subframe Connectors
for 19641/2-66 Ford Mustang
GLO910

Tying the unibody chassis together improves all-around

performance and rigidity. Subframe connectors weld to
the rear frame rail instead of the spring pocket. Both ends
must be welded into place.

2023 - 2024 HOT ROD AND EARLY MUSCLE 223

Small Diameter Lug Nuts Replacement Washers for
Thread size is stamped on every lug nut for Mag-Style Lug Nuts GOR79912
easy identification. The external pattern design Mag-style lug nuts also require the proper washers for
produces better torque and prevents breakage. safe installation on a vehicle. Gorilla offers several styles
Small diameter lugs are heat treated. to fit every need, even some hard-to-find washers for
Thread 20 Lug Nut Kit 24 Lug Nut Kit 32 Lug Nut Kit wheels that have been out of production for many years.
Size Decription with Socket with Socket with Socket
12 x Black
All are chrome plated unless otherwise noted. 5 pack.
GORK5CS-12125BGR — —
1-1/4 Chrome Part No. Description
Chrome GORK5CS-12150GR GORK6CS-12150GR — GOR79903B Short-Shank Mag Washer—Zinc Coated
12 x GOR79912B Cragar Mag Washer, Centered—Chrome
1.50 Black
GORK5CS-12150BGR GORK6CS-12150BGR —
Chrome
Chrome GORK5CS-00012GR — — Valve Stems
1/2 Black Gorilla valve stems are available in six different
GORK5CS-00012BGR — —
Chrome
configurations to fill a variety of tire inflation
14 x Chrome GORK5ES-14150GR GORK6TS-14150GR GORK8TS-14150GR
needs.
1.50 Black
— GORK6TS-14150BGR — Part No. Description GORVS401
Duplex Chrome
14 x 2.0 GORVS401-C Bolt-in Outer Mount Style - 4 Pack
Chrome GORK6TS-14200GR GORK6TS-14200GR GORK8TS-14200GR GORVS402-C Bolt-in Inner Mount Style - 4 Pack
Duplex
GORVS404-C Pull-thru Chrome - Short - 4 Pack
GORVSC-C Chrome Valve Stem Cap, 4-Pack
Power Wrench 1" 1.10"

Remove even the

toughest lug nuts
Thin Wall Sockets
3" 3"
with the Power Wrench. The Part No. Description
GOR34SKT 3/4"
telescopic, 22" hardened
GOR1316SKT 13/16"
steel handle provides the leverage
needed and can be collapsed to 14" for easy storage. GOR34SKT GOR1316SKT
GOR1721 Includes GOR1334 Includes
Wheel Locks
1/2" Power Wrench 1/2" Power Wrench Made from hardened steel & triple-
2 Dual Sockets Fit: 2 Thin Wall Sockets chrome plated with a precise lock
17mm 3" Extension and key engagement. Gorilla 4-pack.
19mm (3/4")
Part No. Size Description Part No. Size Description
21mm (13/16")
GOR71631N 12mm x 1.50 Chrome GOR71601N 14mm x 2.0 Chrome
23mm (7/8")
GOR71631NBC 12mm x 1.50 Black Chrome GOR71671N 7/16" Chrome
GOR71641N 14mm x 1.50 Chrome GOR71681N 1/2" Chrome
GOR71641NBC 14mm x 1.50 Black Chrome

Gorilla Lug Nuts—Sold In 4-Packs

Gorilla stocks over 200 different styles and sizes of lug nuts. Among these are specialty lugs and washers for aftermarket
wheels such as Cragar, Keystone, Appliance, and E-T. They also manufacture “bulge” style acorn nuts which provide 60%
more surface area than a standard acorn lug nut. The Gorilla bulge acorn nut is designed for aluminum wheels without a steel
insert, where seating surface is critical. Bulge nuts can be used in all applications that require an acorn nut.
Standard Mag Short Shank
Acorn Duplex Acorn For use with custom Duplex Mag For custom steel
For use with steel
For use with 8-lug aluminum wheels that For use with 8-lug wheels having an oval
and aluminum
wheels with are 9/16" to 7/8" thick at wheels without slotted hole where
wheels with
tapered seats the stud hole, without tapered seats the stud passes
tapered seats
tapered seat through the wheel

2.3" Long 2.4" Long 1.9" Long 1.4" Long 1.4" Long 1.4" Long 2.0" Long 1.9" Long 1.7" Long 1.4" Long 1.9" Long
1 2 2 4

A B C D F G H I J K
13/16" Hex 7/8" Hex 7/8" Hex 13/16" E 13/16" Hex 7/8" Hex 13/16" Hex 13/16" Hex Acorn Acorn Bulge
Cragar Duplex Acorn Duplex Hex Acorn Bulge 13/16" Short Duplex Extended Standard Bugle Extra Long
Size SST X-Long Acorn Seat Hex Acorn Shank Mag Mag Mag 3/4" 3/4"
12mm x 1.25 — — — — GOR71127B — — — — — —
12mm x 1.50 GOR84137B — — — GOR71137B — — GOR74137B GOR73137B GOR41137B —
14mm x 1.50 — — GOR76147B GOR91147B GOR71147B — — — GOR73147B GOR41147B GOR41147XLB
7/16" GOR84177B — — GOR91177B GOR71177B — — GOR74177B GOR73177B — —
GOR91187XLB
1/2" GOR84187B — — GOR71187B GOR72187B GOR75187B GOR74187B GOR73187B* GOR41187B GOR41187XLHTB
GOR91187B
9/16" — GOR75197XLB — — — — GOR75197B — — — GOR41197XLHTB
GOR91107B
14mm x 2.00 — — — — — — — — — GOR41107XLHTB
GOR91107XLB
* 7/8" Hex HT: Heat Treated 11.38" Shank 21" Shank 37/8" Hex, Shank Diameter .740 43/4" Shank 61.9" Long.

224 2023 - 2024 HOT ROD AND EARLY MUSCLE

 Classic Foam Wheels
GRT1139
GRT832 GRT836 GRT857

The Collector's Edition

3-Spoke Wheel
Part No. Description Dia. Dish
Part No. Description Dia. Dish Black Cushion Grip with Three,
Black Leather Grip, 3-3/4" GRT334 11-1/2" 3-3/4"
GRT1130 14" 3-Hole Black Spokes
Polished Aluminum (Including Styling Sleeve) Black Cushion Grip with Three,
Black Leather Grip, 3-3/4" GRT338 13-1/2" 3-1/2"
GRT1139 14" 3-Hole Black Spokes
Polished Aluminum (Including Styling Sleeve) Black Cushion Grip with Three,
GRT829 8-1/2" 4-1/2"
Note: Call for installation kit. 3-Hole Chrome Spokes
Black Cushion Grip with Three
GRT830 13-1/2" 3-1/2"
Solid Chrome Spokes
Black Cushion Grip with Three
GRT831 13-1/2" 2"
Solid Chrome Spokes
Black Cushion Grip with
GRT832 14-1/4" 3-1/2"
Three Solid Chrome Spokes
Black Cushion Grip with Three,
GRT833 10" 5-1/2"
3-Hole Chrome Spokes
The Collectors Edition GRT834
Black Cushion Grip with Three,
11-1/2" 3-3/4"
3-Hole Chrome Spokes
4-Spoke Wheel Black Cushion Grip with Three,
GRT836 12-1/2" 3-1/2"
Part No. Description Dia. Dish 3-Hole Chrome Spokes
Black Leather Grip, 3-3/4" Black Cushion Grip with Three,
GRT1150 14" GRT838 13-1/2" 3-1/2"
Polished Aluminum (Including Styling Sleeve) 3-Hole Chrome Spokes
Note: Call for installation kit. Black Cushion Grip with Four
GRT857 12-1/2" 4"
Solid Chrome Spokes
Note: Call for installation kit.
Challenger
Wood Wheel Classic Cruisin' Wheels
GRT405 Part No. Description Dia. Dish
With its three-dimensional, Classic Cruisin’
two-plane 4-spoke design, the Wheel with
Black Vinyl Grip
Challenger offers a world-class GRT502 13-1/2" 3-1/2"
and Three,
look. Hardwood grips and silver 3-Hole Chrome
satin anodized spokes present Spokes
a timeless effect, equally Classic Cruisin’
at home in a muscle car or a Wheel with
street machine. Wheel is 13- Black Vinyl Grip
GRT802 12-1/2" 3"
and Three,
1/2" diameter with a 2-1/4" dish. 3-Hole Chrome
Spokes

GRT414 Classic Chain Wheels

Part No. Description Dia. Dish
Chrome Chain
GRT740 Grip with Chrome 11" 3-1/2"
4-Spoke Design
Chrome Chain
Challenger Foam Grip GRT741 Grip with Chrome 10" 5-1/2"
3-Spoke Design
Models
Part No. Description Dia. Dish
Black Cushion Grip
Classic 5 Wheel
GRT414 13-1/2" 3"
with Matte Black Spokes GRT993
Black Cushion Grip
GRT415
with Satin Silver Spokes
13-1/2" 3" Classic hot rod styling
Black Cushion Grip
characterizes the Classic 5.
GRT440 13-1/2" 3" Equally spaced black powder-
with Matte Chrome Spokes
Note: Call for installation kit. coated spokes and matching
trim ring with Grant horn button
complement the foam-cushioned,
hand-stitched, leather-grain black
vinyl grips. Wheel is 14-1/2" diameter
with a 2-3/4" dish.

2023 - 2024 HOT ROD AND EARLY MUSCLE 225

 GRT213 GRT969

Classic Wood Wheels Classic Nostalgia

Genuine walnut-finished hardwood
grips with chrome CRS spokes, and
Wheel/Horn Button
anodized aluminum rivets. Combination Models
Part No. Description Dia. Dish Part No. Description
GRT201 Classic Wood Wheel 15" 4-1/8" Classic Combination
GRT966
with GRT966-0 Wheel, GRT5847 Mustang Horn Button
GRT213 Classic Wood Wheel 13-1/2" 3-3/4"
Classic Combination
GRT967
with GRT967-0 Wheel, Chevrolet Horn Button
Classic Combination
GRT968
with GRT968-0 Wheel, GRT5847 Mustang Horn Button
Classic Combination
GRT969
Classic Nostalgia Wheels GRT966-0 with GRT969-0 Wheel, Chevrolet Horn Button

Recalling the 1960s muscle car era,

the wheels have brushed stainless Metal Flake Steering Wheels
steel spokes, chrome horn buttons, The durable vinyl metal flake grip three-spoke steel
and a choice of hardwood or foam steering wheel is back. The wheel is available with
grips. chrome or black spokes along with a wide variety of
Part No. Description Dia. Dish metal flake wraps.
GRT963-0 Classic Nostalgia, Hardwood Rim 13-1/2" 3-3/4" Part No. Description
GRT966-0 Classic Nostalgia, Hardwood Rim 15" 4-1/8" 13-1/2" Diameter, Chrome Spokes
GRT967-0 Classic Nostalgia, Hardwood Rim 15" 4-1/8" GRT8442 Green
GRT8445
GRT968-0 Classic Nostalgia, Foam Grip 15" 4-1/8" GRT8443 Purple
GRT969-0 Classic Nostalgia, Foam Grip 15" 4-1/8" GRT8445 Red
GRT8446 Blue
GRT8447 Gold
Retro GM 13-1/2" Diameter, Black Spokes
GRT8452 Green
Steering Wheels GRT8453 Purple
These retro combination GRT8455 Red
models include a classic GRT8456 Blue
nostalgic steering wheel and GRT8457 Gold
Grant brushed stainless steel 15" Diameter, Chrome Spokes GRT8455
horn button on 3-bolt wheels GRT8462 Green
GRT8463 Purple
only. These wheels are modeled GRT929
GRT8465 Red
after the designs from 1960s GRT8466 Blue
muscle cars. 14-1/2" diameter with 3" dish. 6-bolt version GRT8467 Gold
is a direct bolt-on and uses stock horn button while 3-bolt 15" Diameter, Chrome Spokes
pattern is a universal fit with the standard (3000/4000) GRT8472 Green
series install kit. GRT8475 Red
Part No. Description
GRT929 Dark Mahagony, 6-Bolt Mounting Signature Series
GRT930 Light Walnut, 6-Bolt Mounting
GRT974 Light Walnut, 3-Bolt Mounting
Collector's Edition GRT1175
GRT976 Gloss Black Stain, 3-Bolt Mounting Mahogany Wheels
Beautifully grained, deep-
dish mahogany wheels are
set off by polished aluminum
spokes. Several diameters
are available. Dish dimensions
GRT8510 include styling sleeve.
“Gripper Series” Part No. Description Dia. Dish
The Gripper Series steering GRT1170 Collector’s Edition Wheel, 3-Spoke 14-1/2" 3"
wheel offers a diamond- GRT1175
Collector’s Edition Wheel, Light Stain
14" 3-1/2"
textured, vinyl-covered wheel with Rivets
that offers maximum four- GRT1178 Collector’s Edition Wheel, Black Stain 14-1/2" 3"
season control.
Part No. Description
GRT8510 4-Slotted Spokes, 13" Diameter, 1" Dish
GRT8511 3-Spokes, 13-1/2" Diameter. 1" Dish

226 2023 - 2024 HOT ROD AND EARLY MUSCLE

Billet Series Corvette Wheel
Leather Steering Wheels GRT1901
GRT791
These 14-3/4" diameter, three- Corvette wheels are direct bolt-
spoke steering wheels feature on replacements for the factory
a billet horn button with vehicle wheel and use the Corvette
manufacturer logo. The black bolt pattern and factory horn
leather-wrapped, hand-stitched button—no installation kit
aluminum wheel also includes needed. Wheels are 14-3/4"
an installation kit. Available with in diameter with a 1-1/4" dish
Chevy Bowtie, Ford Oval, or Jeep and feature three aluminum spokes and hand-stitched
logos. leather or Mahogany rims.
Part No. Description Description Dia. Dish
GRT1901 1968-94 Chevrolet, Bowtie Logo 1963-75 and 1977-82 Corvette Wheel,
14-3/4" 1-1/4"
GRT1902 1969-80 Ford Passenger Cars, Oval Logo Black Leather Rim
GRT1903 1965-77 Ford Pickup, Oval Logo
GRT1904 1976-95 Jeep, Logo
Club Sport
Steering Wheel
Aluminum GRT600 GRT457
Performance Club Sport model steering wheel
features a 13-1/2" diameter and
Steering Wheels 3-1/2" dish design. A molded
Constructed of 6061-T6 polyurethane wheel rim with
aluminum, these black foam textured leather-grain finish
grip wheels feature 3-spoke and polished accents surround
unidirectional designs and a clear anodized polished
universal three-hole mounting aluminum spokes.
pattern.
Note: Requires GRT4009 Adapter Ring for installation. This wheel will not work with Billet Style
Part No. Description Horn Buttons.
GRT600 13" Aluminum Racing Wheel
GRT601 15" Aluminum Racing Wheel
GRT602 16-1/2" Aluminum Racing wheel
Signature Series
GT Rally Wheels
GRT1906 Molded cushion grips are GRT760
Billet Aluminum contoured to the shape of
Steering Wheel Kits the hand and patterned after
popular rally car styling.
Black anodized, 14-3/4"
Anodized aluminum alloy
diameter, 3-spoke, billet
spokes, in black or silver,
aluminum steering wheels.
highlight the matte black
These wheels feature hand-
leather-grained rubber styling
stitched, full-wrapped black
sleeves.
leather grip for ultimate driving
comfort. Kits include billet Part No. Description Dia. Dish
GRT748 GT Rally Wheel, Four Silver Spokes 14" 3-3/4"
horn button and installation kit.
GRT760 GT Rally Wheel, Three Silver Spokes 13" 3"
Part No. Description GRT761 GT Rally Wheel, Three Black Spokes 13" 3"
3-Spoke Billet Steering Wheel GRT1108 GT Rally Wheel, Four Polished Spokes 14" 3-3/4"
GRT1906 with Chevrolet Logo Horn Button, Fits GM Passenger Cars
1969-94, Pickups 1974-94 ***
3-Spoke Billet Steering Wheel
GRT1907 with Ford Logo Horn Button, Fits Ford Passenger Cars 15" Classic Steering Wheel
1970-80, Pickups 1978-91 ***
3-Spoke Billet Steering Wheel
GRT277
GRT1908 with Ford Logo Horn Button, Fits Ford Pickups Classic-style steering wheel
1965-66/1968/1970-77 *** offers a chromed steel 3-spoke
3-Spoke Billet Steering Wheel design with a high-gloss black
GRT1909 with Jeep Logo Horn Button, Fits Jeep CJ, Wrangler, vinyl grip. 15" diameter with a
Cherokee and Pickup 1976-95 *** 3-1/2" dish.
*** Consult catalog for additional applications

2023 - 2024 HOT ROD AND EARLY MUSCLE 227

Banjo Style Mopar Style Classic
Steering Wheel Nostalgia Wheels
Nostalgia wheels feature CRS GRT246
GRT1057 steel, nickel plated spokes
The Banjo Style is an update of (matte finish) that are patterned
an original Ford wheel design after the classic Mopar Tuff
that looks as good today as it wheel from the 1960s muscle car
did seventy years ago. Graceful era. Wheels are available with
stainless steel spokes combine walnut-finished hardwood grips
with a highly polished center or thick foam-cushioned grips.
hub and sculptured stainless steel retainers to attach The retro-style horn button, sold
the spokes to either soft, hand-stitched leather, polished separately, completes the look. Wheels have the original
stainless steel, or hand-rubbed mahogany rims. Mopar Tuff wheel bolt pattern and can be installed as a
14-3/4" diameter with a 3" dish. replacement using the original hardware and column.
Part No. Description Dia. Dish
GRT246 Three Spokes, Hardwood Grip 15" 1-3/4"
GRT846 Three Spokes, Black Foam Grip 15" 1-3/4"
Elite GT Wheels GRT742 GRT1004 Black Leather, Baseball Stitch 14-5/8" 1-1/2"
Highly polished aluminum spokes GRT5699
Horn Button Only,
for Original Mopar Tuff Wheel, GRT246 and GRT846
and machined aluminum trim
rings nicely accent the hand-
stitched leather-grain vinyl grips
and matte black styling sleeves. Horn Buttons
Part No. Description Dia. Dish
Grant has a wide selection of horn buttons that are
GRT739 3-Spoke Elite GT 14" 3-3/4" designed to personalize virtually any steering wheel
GRT742 4-Spoke Elite GT 14" 3-3/4" installation and are available to fit a variety of popular
steering wheels.
Signature Series Formula GT Wheels

GRT5640 GRT5685 GRT5693 GRT5661 GRT5668

GRT764 GRT773 Part No. Description
Fit Classic and Challenger Steering Wheels
GRT5640* Chevy, Red/Black
GRT5643* Chevy, Red/White/Blue Stainless
GRT5644* Chevy, Blue /Silver Stainless
GRT5649* Chevy, SS Super Sport Emblem
GRT5682† Ford V-8
GRT5685† Ford Oval, Chrome
GRT5688† Ford Mustang
The Formula GT wheels feature hand-stitched, black GRT5690 Mopar, Chrome
leather-grained vinyl grip and anodized aluminum spokes. GRT5693 Chrysler Pentastar, Chrome
GRT5790 Mopar, Black
Part No. Description Dia. Dish
Fit Signature Steering Wheels
GRT1760 Formula GT Wheel, Three Silver Spokes 15" 3-1/2"
GRT5650* Chevy, Blue/Silver
GRT764 Formula GT Wheel, Three Silver Spokes 14" 3-1/2"
GRT5652* Corvette, Black/Red/Silver
GRT763 Formula GT Wheel, Three Silver Spokes 13" 3"
GRT5654* Oldsmobile, Red/Gray
GRT771 Formula GT Wheel, Three Polished Spokes 13" 3"
GRT5657* Chevy, Red/White/Blue
GRT1770 Formula GT Wheel, Three Black Spokes 15" 3-1/2"
GRT5660* Chevy, Red/Black
GRT774 Formula GT Wheel, Three Black Spokes 14" 3-1/2"
GRT5661* Camaro, Silver/Black
GRT773 Formula GT Wheel, Three Black Spokes 13" 3"
GRT5662† Ford V8, Black/Silver
GRT772 Formula GT Wheel, Three Black Spokes 12" 3"
GRT5665† Ford Oval, Black
GRT5668† Ford Mustang, Black
GRT5674 Plymouth, Black
GRT5870 Smooth Polished Billet
GRT1071 GRT5876* Bowtie Logo Polished Billet
Signature Series * GM officially licensed product. † Ford officially licensed product.
LeMans Wheels
Wheels have polished Banjo Wheel Installation Kits
aluminum spokes and horn Kits feature polished stainless hub adapter that
button. Wheels include black smooths the transition between the Banjo wheel
hand-stitched, leather-grained and the existing steering column.
vinyl grip or mahogany rim.
Part No. Description
Part No. Description Dia. Dish GRT5701 1957-68 GM Steering Columns, Excludes Tilt/Telescopic
GRT1070 Four Single Split Spokes, Black Grip 14" 3-3/4" GRT5702 1969-94 GM Steering Columns, Excludes Tilt/Telescopic
GRT1071 Four Single Split Spokes, Mahogany Rim 14" 3-3/4"

228 2023 - 2024 HOT ROD AND EARLY MUSCLE

Steering Wheel Adapters Real Carbon Fiber Sheet
Adapts popular steering wheels to Grant Lightweight but exceptionally
Racing quick-release units. rigid, real carbon fiber sheet is
Part No. Description ideal when fabricating custom
Adapts Grant 5-Bolt Steering Wheel dashes or gauge panels. Dry
GRT3073
to Grant 3-Bolt Racing Quick Release vacuum pressed for durability.
GRT3075
Adapts Momo/Sparco/Nardi 6-Bolt Steering Wheel Offered with low-gloss matte or high-gloss finish.
to Grant 3-Bolt Racing Quick Release
Part No. Description
GRT205 24" x 39", Low-Gloss Matte Finish
Billet Style GRT211 19.4" x 48", High-Gloss Finish
GRT215 24" x 39", High-Gloss Finish
Installation Kits
An optional styling
upgrade, billet-style Real Carbon Fiber
kits have Grant’s 5-hole Tube Protectors
mounting pattern and can Genuine carbon fiber
only be used with Grant tube protectors may be
Signature wheels. Styling installed directly over roll
sleeves are offered in cage tubing, preventing
highly polished natural tubing from becoming scratched when entering or exiting
aluminum. A standard GRT5162-1 the driver's compartment. Offered in several different
adapter is also available. sizes.
Part No. Description Part No. Description
GRT3196 Standard Adapter, Fits 1969-94 GM GRT220 1-1/2" Dia. x 59" Long, Fits 1-1/4" to 1-1/2" Dia. Tubing
GRT5162-1 Polished Billet,1957-68 GM Steering Column GRT225 1-1/2" Dia. x 48" Long, Fits 1-1/4" to 1-1/2" Dia. Tubing
GRT5196-1 Polished Billet, 1969-94 GM Steering Column GRT230 1-1/2" Dia. x 30" Long, Fits 1-1/4" to 1-1/2" Dia. Tubing
GRT235 2" Dia. x 59" Long, Fits 1-5/8" to 2" Dia. Tubing
GRT240 2" Dia. x 48" Long, Fits 1-5/8" to 2" Dia. Tubing

454 Cu. In./425 Horsepower Crate Engine

LS Series Center-Bolt Valve Cover GMP12568774
GMP25534398 Affordable 454 cu. in.
Valve covers are big block delivers 425
cast aluminum with horsepower and 500 lbs./
a breather hole. ft. of torque, and is fully
Sold individually. capable of street or strip
duty. Durable engine
includes an updated iron
LS Series Center-Bolt Valve Cover block, forged crankshaft,
GMP25534399 forged connecting rods,
Valve covers are 8.75:1 compression ratio forged pistons, hydraulic
cast aluminum roller camshaft, iron rectangular port cylinder heads,
with no breather dual-plane aluminum intake manifold, water pump,
hole. Sold and flexplate. Carburetor, ignition, and starter are not
individually. included.
454/425 Horsepower Crate Engine Specifications
BB Chevy Custom Aluminum Horsepower 425
Compression Ratio 8.75:1
Valve Covers Camshaft Hydraulic Roller
GMP12495488 Camshaft Duration 211°/230° @ .050"
Valve Lift .510"/.540"
Die-cast aluminum
Intake/Exhaust Valve Sizes 2.190"/1.880"
covers have raised
Chevrolet and
Bow-Tie logos. Two covers, oil cap, two grommets, and 14 LS Series Front Distributor Drive Cover Kit
retaining bolts are included. For 1965-94 engines. GMP88958679
For engines where a carburetor and
distributor are used.

2023 - 2024 HOT ROD AND EARLY MUSCLE 229

Air Cleaner Assemblies Air Filter Cleaning Kits
Green Filter air cleaner Maximize the performance and life of
assemblies feature a chrome- Green Filter air filer elements.
plated steel base in a variety
Part No. Vehicle
of sizes and flat or drop styles, Air Filter Cleaner & Oil Kit w/ 12-oz.
and Green Filter's distinctive GRE2000
Cleaner and 8-oz. Oil
washable and reusable green filter elements. GRE2140 Air Filter Cleaner 1-Gal Refill
Part No. Description GRE2100 Air Filter Cleaner 12-oz.
GRE2195 14" x 4" Flat Base GRE2008 Air Filter Cleaner 32-oz. Refill
GRE2196 14" x 6" Flat Base GRE2001 Air Filter Oil, Synthetic, 12-oz.
GRE2343 14" x 3" Drop Base GRE2028 Air Filter Oil, Synthetic, 8-oz.
GRE2194 14" x 3" Flat Base
GRE2344 14" x 4" Drop Base
GRE2345 14" x 5" Drop Base

Air Filters
Designed to maximize air flow and
engine performance, Green Filter
air filters feature a distinctive green
cotton-gauze element that allows for
easy cleaning and reuse.
Part No. Description
GRE2350 Air Filter Round, 11" x 6"
GRE2073 Air Filter Round, 12" x 2-1/2"
GRE2012 Air Filter Round, 14" x 3"
GRE2071 Air Filter Round, 14" x 5"
GRE2160 Air Filter Round, 14" x 6"
GRE2064 Air Filter Round, 14" x 2.31"
GRE7113 Air Filter Round, 16-1/4" x 7"
GRE2030 Air Filter Round, 14" x 4"

GT Pro-Touring/Autocross GT Retro Cobra Style

GTP54-5815 GTP38-4247
The GT Pro-Touring modular design is The GT Cobra Retro 15" diameter
handcrafted with a special tiered wheel has redefined the 60s
3-spoke design, elongated lightening sports car spirit with its one-
slots, and genuine black leather or hand piece forged billet aluminum
rubbed, stained mahogany finger grip rim. construction, genuine laminated
Well-balanced 15" diameter, CNC-machined wood grip with nine rivets sealed
6061-T6 aluminum with black /silver/black anodized in polyurethane clear coat for
finish give the professional Pro-Touring and Autocross beautiful gloss finish. 9-bolt mounting pattern. Horn
competitor a true competition feel. 2" dish, 3-bolt button sold separately.
mounting pattern. Horn button sold separately.
GT Retro Banjo Style
GT Retro Series Wood Wheel GTP21-4245
GTP36-5457 The GT Banjo style 15-1/2" diameter
The GT Retro wheel inspired by wheel is symbolic of the wheels
the muscle cars of the 1960s and from the 30s and 40s. It features a
1970s. It features a 15" diameter one-piece forged billet aluminum
stainless steel construction, construction, black leather top with
brushed finished spokes with billet finger grips. 1-3/4" dish, 9-bolt
polished edges, and genuine mounting pattern. Horn button sold
hardwood walnut stained grip. separately.
4" dish, 3-bolt mounting pattern.
Horn button sold separately.

230 2023 - 2024 HOT ROD AND EARLY MUSCLE

GT Classic Foam Chrome GT Retro Wood
GTP14-4331 GTP36-5459
The GT Classic Foam features a This wheel is inspired by the GM
polished chrome center 3-spoke pony and muscle cars of the 60s
design with four chamfered and 70s. This 15" diameter, 4"
lightening holes. Large 14-1/2" dish GT Retro Wood Dark Finish
diameter thick foam grip to view wheel features stainless steel
gauges clearly. 3-1/2" dish, 3-bolt construction, brushed finished
mounting. Horn button sold strokes with a “slot” design, polished
separately. spoke edges, and a unique V-shape,
genuine wood grip finished with a
GT Classic Foam Black hand rubbed, dark walnut stain, and a 3-bolt mounting
pattern. Horn button sold separately.
GTP14-4311
The GT Classic Foam pay tribute
to a timeless performance
GT Classic Wood
design. This wheel features black GTP14-4337
powder-coated spokes with four This 15" diameter wheel with a 4"
chamfered lightening holes, a dish features polished chrome
larger hole to view gauges clearly, spokes with four chamfered
an originally vintage thick foam lightening holes, a larger
grip and a 3-bolt mounting pattern. diameter to view gauges clearly,
14-1/2" diameter. 3-1/2" dish. Horn a genuine mahogany wood grip
button sold separately. with a hand-rubbed dark walnut
stain and polyurethane clear
GT Classic Foam Mustang Style coat. 3-bolt mounting. Horn button sold separately.
GTP35-5431
The timeless performance design
GT Classic Wood Slotted
features polished chrome spokes GTP14-5437
with four chamfered lightening This 15" diameter wheel with
holes, polished spoke edges, and a 4" dish features slotted
polished laser-cut horn button polished chrome spokes and
accents at the end of each spoke. a genuine wood grip with
The grip is an original vintage sculpted finger grips, finished
recipe thick foam. 15" diameter. with a hand-rubbed dark walnut
4-1/8" dish. Horn button sold stain and polyurethane clear
separately. coat. 3-bolt mounting. Horn
button sold separately.

GT Classic Foam Slotted Pro-Touring

Spokes Sport Steering Wheel
GTP36-5431 GTP52-5375
This wheel design features 15" Inspired by the GM factory-
diameter with 4-1/8" dish, polished optional Sport wheel found
chrome spokes with a slot design, on the 70s era Camaro,
an original vintage recipe, thick Corvette, Chevelle, and Nova.
foam grip for comfort and a 3-bolt Designed with a GT black
mounting pattern. Horn button anodized spokes perforated
sold separately. leather hand grips, and 9-bolt
mounting pattern. 14-1/2"
diameter. 2-3/8" dish.

GT Competition Bell Style GT Retro

GTP91-4040 Leather Steering Wheel
This wheel is patented after the GTP36-5445
historic “Bell” racing wheel. It The genuine leather with
features a one-piece 15" diameter perforated hand grip
polished chrome moly frame with sections pay tribute to
chrome-plated edges. 3-bolt a timeless performance
pattern. Flat dish. Horn button era with stainless steel
sold separately. design with slots. GT3
3-bolt mounting pattern. 15"
diameter. 4-1/8" dish.
2023 - 2024 HOT ROD AND EARLY MUSCLE 231
GT9 Retro Banjo Style GT3 Horn Buttons
GTP11-1000 GTP21-1004
Steering Wheel Designed for use on all 3-bolt GT
steering wheels. Features “sure-lock”
GTP21-4247 O-Ring design that ensures they don’t
This design is symbolic of pop off and are interchangeable with
steering wheels from the 30s all other brands of 3-bolt steering
and 40s. 9-nine bolt mounting wheels. Made from billet 6061-T6 GTP11-2000 GTP11-1522
pattern. Polished aluminum aluminum and grade 8 hardware.
spokes with wood grip. 15" Available in a brilliant polish or black anodized finish.
diameter. 1-3/4" dish.
Part No. Description
Standard Polished Series, 1-1/2" High
GT3 Retro Cobra Style GTP11-1002 Chevrolet Bow Tie Engraved
Steering Wheel GTP11-1022 Chevrolet Red Bow Tie Color Emblem
Standard Black Anodized Series 1-1/2" High
GTP32-4247 GTP21-1004 GT Logo Engraved
This forged billet aluminum Low Profile Series, 1-1/4" High
3-spoke steering wheel with GTP11-2000 Plain Polished
a polished finish features a Polished Hi-Rise Series 1-1/2" High
GTP11-1500 Black Center
laminated wood grip secured
GTP11-1522 Chevrolet Red bow Tie Emblem
with 9 rivets for true retro feel.
GTP11-1525 Ford Mustang Color Emblem
6-bolt mounting design includes
6-bolt to 3-bolt adapter. 14"
diameter with 3-1/8" dish. Horn GT9 Horn Button
button and installation hub sold GTP21-1162
separately. Designed for all GT9 steering wheels. The
button is interchangeable with all other
GT3 Retro 4-Spoke Satin 9-bolt brands. Black anodized finish. Button
is large at 4-7/16" diameter x 3/8" high with
Steering Wheel Chevy Emblem.
GTP32-4265
Muscle car design with one- GT9 Polished Horn Buttons
piece forged billet aluminum Designed for use on all 9-bolt wheels. Same
4-spoke steering wheel great feature as the GT3.
measures 13-3/4" in diameter
Part No. Description
with a 3-1/4" dish. The smudge-
Small Size, High-Tech Look. Shows 9 Bolt Pattern.
proof satin finish is accented GTP11-1121 Ford Oval Color Emblem
by a black leather-wrapped grip GTP11-1125 Ford Mustang Color Emblem
and the included horn button. Large Size, Elegant Look Covers 9 Bolt Pattern.
9-bolt design includes 9-bolt to GTP11-1162 Chevrolet Red Bow Tie Emblem
3-bolt adapter. Banjo Style, Elegant Look Covers 9 bolt pattern.
GTP11-1223 Ford V8 Logo Engraved
Euro Horn Buttons
Designed to fit the Installation Kits
GT Pro-Touring Feature a one-piece construction
Switchback model adapter hub with a 3-bolt or
as well as most 9-bolt mounting pattern that is
aftermarket 5- and interchangeable with any standard
6- bolt steering 3-bolt or 9-bolt steering wheel or
wheels, the Euro line horn button. Complete with horn
of horn buttons are wiring leads, mounting bolts, and
made from black anodized aluminum, and feature complete installation instructions.
heavy-duty terminal connectors. GT3 GT3 GT9
Description Black Polished Polished
Part No. Description 1967-69
GTP21-1622 Chevrolet BowTie Color Emblem GTP20-5002 GTP10-5002 —
GM/AMC All Models
GTP21-1625 Ford Mustang Color Emblem 1969-94
GTP20-5006 GTP10-5006 GTP10-5506
GM/AMC All Models
1965-70 Ford All Models — GTP10-6004 —
1963-1/2-1964 Ford
GTP20-6005 — —
Mustang, Falcon, Comet
1970-80 Ford All Models GTP20-6009 GTP10-6009 —

232 2023 - 2024 HOT ROD AND EARLY MUSCLE

Here’s a Cool Suggestion:
When installing a Griffin radiator, make it a part of an overall cooling system upgrade. Consider these items: a good electric
fan, a fan shroud, a high-performance water pump, and a bottle of Redline RED80204 or Royal Purple ROY01600 wetting
agent.

Direct Fit Radiators Ford Universal Radiators

Griffin’s direct fit radiators Ford* radiators have two rows
bolt in place of the stock of 1" diameter cooling tubes.
radiator and provide a vast Outlets are top right, bottom
improvement over stock left.
cooling. Some applications Part No. Description
have internal oil coolers for GRI126182X 19" x 22" x 3"
automatic transmissions. Available in the Standard series GRI126241X 16" x 27-1/2" x 3"
with 1" tubes or the Pro-Series with 1-1/4" cooling tubes. GRI126242X 19" x 27-1/2" x 3"
GRI126272X 19" x 31" x 3"
Part No. Description
General Motors * Will also fit some Mopar applications.
A-G Body, LS1/LS2 And Early LS3,
GRI8-00008
1-1/4" Tubes without Trans. Cooler, 28" Wide Core
1967-81 C/K Series Trucks, Early LS1/LS2 And LS3,
Pro-Series Universal Radiators
GRI8-00013-LS
1-1/4" Tubes without Trans. Cooler, 28" Wide Core Two rows of 1-1/4" diameter cooling tubes for greater
cooling.
GM Universal Radiators Part No. Description
GM – Outlets Top Left,
GM radiators have two rows of 1" diameter cooling tubes. Bottom Right
Outlets are top left, bottom GRI155222X 19" x 26" x 3"
right. GRI155241X 16" x 27-1/2" x 3"
Part No. Description GRI155242X 19" x 27-1/2" x 3"
GRI125182X 19" x 22" x 3" GRI155272X 19" x 31" x 3"
GRI125202X 19" x 23-1/2" x 3"
GRI125222X 19" x 26" x 3"
GRI125241X 16" x 27-1/2" x 3"
GRI125242X 19" x 27-1/2" x 3"
GRI125272X 19" x 31" x 3"

Non-Slip Tool Mats

High-performance, non-magnetic, and anti-static rubber tool mats are manufactured with a unique chemistry that keeps
them from slipping or sliding on any surface they are placed, while still allowing for easy removal. Being extremely flexible,
the Grypmat can be bent, folded, or rolled, and will always return to its original shape. A polymer-silicone bend with specific
properties makes these tool mats resistant to all types of chemicals along with being flame resistant. Offered in several
different configurations and sizes in orange or green.
Part No. Description
Orange Grypmats
GRYRFGM-CR01S Tool Mat, 12" x 22", One Large and Four Small Compartments
GRYRFGM-CR02S Tool Mat, 8" x 12", One Large Area for Tools and Two Small Compartments
GRYRFGM-CR03S Tool Mat, 6" x 12", Six Individual Compartments
GRYRFGM-TP3 Trio Pack, One Each of All Three Orange Grypmats
Green Grypmats
GRYGMPM Tool Mat, 9-1/2" x 7-1/2", One Large Area for Tools and Three Small Compartments
GRYGMPS Tool Mat, 9" x 4-1/4", One Large Area for Tools and Three Small Compartments
GRYGMP2P Duo Pack, One Each of Both Green Grypmats

2023 - 2024 HOT ROD AND EARLY MUSCLE 233

Grip Lock Ties
Ideal for bundling wires, cables, etc., innovative, rubber-lined nylon zip ties incorporate deep
teeth that deliver a significant click from the extra-tough locking head. A built-in release tab
allows loosening and releasing the tie when necessary. Following tightening, the excess strap
may be cut off as desired. Choose from 8" or 12" long zip ties with blue, orange, or red rubber
lining.
Part No. Description Part No. Description Part No. Description
Blue Orange Red
8" Long 8" Long 8" Long
GLT2908BKBUHB15 8" Long, Blue, 15-Pack GLT2908BKOGHB15 8" Long, Orange, 15-Pack GLT2908BKRDHB15 8" Long, Red, 15-Pack
GLT2908BKBUHB40 8" Long, Blue, 40-Pack GLT2908BKOGHB40 8" Long, Orange, 40-Pack GLT2908BKRDHB40 8" Long, Red, 40-Pack
GLT2908BKBUHB100 8" Long, Blue, 100-Pack GLT2908BKOGHB100 8" Long, Orange, 100-Pack GLT2908BKRDHB100 8" Long, Red, 100-Pack
12" Long 12" Long 12" Long
GLT2912BKBUHB15 12" Long, Blue, 15-Pack GLT2912BKOGHB15 12" Long, Orange, 15-Pack GLT2912BKRDHB15 12" Long, Red, 15-Pack
GLT2912BKBUHB40 12" Long, Blue, 40-Pack GLT2912BKOGHB40 12" Long, Orange, 40-Pack GLT2912BKRDHB40 12" Long, Red, 40-Pack
GLT2912BKBUHB100 12" Long, Blue, 100-Pack GLT2912BKOGHB100 12" Long, Orange, 100-Pack

Dry Chemical Fire Extinguishers Universal Fire Extinguisher Seat Mount

MaxOut™ dry chemical fire extinguishers have a H3RSM01BK
proven track record extinguishing the types of This fully adjustable fire
fires likely to occur in an automotive environment. extinguisher seat mount
Rechargeable, made in USA. with high-quality steel installs easily in most vehicles,
cylinders, all-metal valve construction and 6-year attaching to the seat rail bolts
warranty. UL listed and rated. or above the slider. Available
Part No. Agent Weight (lbs.) Finish UL Rating in lightweight, durable aluminum
H3RMX100R 1.0 Red 2B:C with a black anodized finish, it accepts all
H3RMX100C 1.0 Chrome 2B:C
H3R standard and billet aluminum performance fire
H3RMX250R 2.5 Red 1A:10B:C
H3RMX250C 2.5 Chrome 1A:10B:C
extinguisher brackets. Sold individually.
H3RMX250B 2.5 Black 1A:10B:C

Extinguishers
HalGuard™ extinguishers contain a“clean” extinguishing agent that leaves no residue to clean up. Ideal
protection for race cars and hot rods. All extinguishers are made in USA, with high-quality rechargeable steel
cylinders, all-metal valve construction, and a one-year warranty. UL-listed and rated.
Part No. Agent Weight (lbs.) Finish UL Rating Part No. Agent Weight (lbs.) Finish UL Rating
H3RHG100R 1.4 Red 1B:C H3RHG250C 2.5 Chrome 2B:C
H3RHG100C 1.4 Chrome 1B:C H3RHG250B 2.5 Black 2B:C
H3RHG100B 1.0 Black 1B:C H3RHG500R 5.0 Red 5B:C
H3RHG250R 2.5 Red 2B:C

Billet Steel Flywheels

Machined from certified billet steel to withstand the stress of racing. Most Hays flywheels are
drilled for Borg & Beck and long-style clutch patterns, and precisely balanced to neutral (internal)
or Detroit (external) specifications. Certified under SFI spec 1.1. Call for applications.

Street/Strip Clutch Discs and Pressure Plates

Designed for high-performance use and to exceed original equipment specifications, pressure plates have
heavier springs and most have centrifugal assists to reduce slippage. Discs use a higher strength friction
material. Call for applications.

Performance Clutch Kits

Engineered and built as matched assemblies, each kit will provide exceptional performance,
durability, and long-term dependability. Kit includes: pressure plate, throw-out bearing, disc,
alignment tool and bolt kit.
Call for applications.
234 2023 - 2024 HOT ROD AND EARLY MUSCLE
Brake Pads
Performance Ceramic – Compound Code “Z”
Specially formulated ceramic composite matches the low-dust, low-noise performance
of OE ceramic brake pads. A fade-resistant linear friction profile produces improved
braking over OE with smooth engagement characteristics.
HPS Performance Street – Compound Code “F”
Unique Ferro-Carbon compound combines motorsports braking technology with the qualities of an OEM pad. Expect a little
more brake dust than Performance Ceramic, but a touch better braking performance.
HP Plus Autocross – Compound Code “N”
The perfect pad for the enthusiast who wants to drive to the race track, race, then drive home and not have to change brake
pads. This pad gives superb stopping performance but with a trade-off of higher rotor wear, pad wear, and brake dust than a
street pad. Not the pad for everyone, but possibly the perfect pad for the rest of them. This is recommended for Autocross,
Solo II, and track day events.

When ordering please insert the compound code in place of the “x” in part number.
Compound Insert the Compound
Brake Pad Code Code Here Year and Application Front Rear
Performance Ceramic Z Chevrolet
HPS Performance Street F 1967-82 Corvette HAWHB126x505 HAWHB126x505
HAWHB245x631
HP Plus Autocross N Pontiac
Note: The last three digits in the part number determines the pad thickness. For example, 1967-68 Firebird HAWHB126x505 —
HAWHB245x631 has a .631" pad thickness.

LS3 Intake Manifold Heat Heatshield Mat

Shield HSP721202
HSP140021 Ideal for applications with one
inch of airspace and ample airflow,
Keep intake temperatures lower
this aluminized self-adhesive matting
on any LS3 powerplant utilizing
will reflect up to 90% of radiant heat. Uses
a factory intake. The shield
include firewalls, floorpans, air intakes as well
creates a heat barrier between
as unfinished fiberglass and carbon fiber components.
the top of the engine and the
Protects up to 1100°F continuous/2000°F intermittent
bottom of the intake, maximizing
temperatures. 24" x 24".
the horsepower potential of the
engine. Made in the USA.
Lava™ Starter Heat Shield
HP Heat Shrink Designed with crushed volcanic rock
fibers, this heat shield will extend the
HSP353019 life of the starter motor and solenoid
Designed to protect wirelooms, from high underhood temperatures
cables, and hoses from commonly found on high horsepower
damaging high temperatures. engine applications. Protects up to
This 1-1/2" diameter heat shrink is made from polyolefin 1200°F continuous/2000°F intermittent
tubing and meets all AMS-DTL-23053/5C, UL, and CSA temperatures. Installation doesn't require starter
specifications. Made in the USA. removal.
Part No. Description
HSP501070 7-1/4" x 21-3/4"
HSP501071 3-1/2" x 18", Small Gear Reduction

2023 - 2024 HOT ROD AND EARLY MUSCLE 235

Heat Shield Armor Fire Shield Sleeve
Protect hoses and wires from heat damage,
This 4-mil thick layer reduces radiant
500°F continuous/900°F intermittent.
heat up to 70%. Ideal for exhaust system
Depending on its use, the silicone covered
components. Made in the USA.
wrap can dissipate as well as retain heat.
Part No. Description 36" long. Black. Made in the USA. Various
HSP170001 1/4" x 6" x 60"
diameters.
HSP170102 1/4" x 12" x 24"
HSP170105 1/4" x 12" x 60" Part No. Description
HSP172252 Pipe Kit, 2-1/2" Diameter x 24" Long HSP210040 3/8" I.D.
HSP175102 1/2" x 12" x 24" HSP210042 1/2" I.D.
HSP175110 1/2" x 18" x 48" HSP210044 3/4" I.D.
HSP176001 1/2" x 12" x 36"
HSP177201 12" x 10", With Ties Thermaflect™ Sleeve
HSP179002 Tape, 2" x 39" Designed for easy slide on/slide off
installation, the chrome fiberglass sleeve
Sticky™ Shield heat barrier, reflects radiant heat away from
Designed to reflect 90% of radiant components. Works well protecting wires
heat, this ultra thin lightweight and cable from 1100°F continuous/2000°F
sheet is ideal for off-road vehicles, intermittent temperatures. Various diameters.
race cars, and other performance Part No. Description
applications. The adhesive backing HSP270101 1" I.D., 120"L, Sewn Seam
allows for easy application. HSP274012 1/2 " I.D., 36"L, Hook & Loop Seam
Offers 1100°F continuous/2000°F HSP274034 3/4" I.D., 36"L, Hook & Loop Seam
intermittent protection. Made in the USA. HSP274100 1" I.D. x 36"L, Hook & Loop Seam
HSP274112 1-1/2" I.D. x 36"L, Hook & Loop Seam
Part No. Description
HSP274200 2" I.D. x 36"L, Hook & Loop Seam
HSP180020 1/8" x 12" x 23"
HSP180021 1/8" x 23" x 24"
HSP180025 1/8" x 36" x 47" Lava™ Turbo T4 Flange Heat Shield
HSP300074
Hose & Wire Sleeve HP Builders Kit Reduces underhood temperatures up
HSP204002 to 60% while retaining heat inside the
This fiberglass woven heat sleeve is designed turbocharger housing. Allows for consistent
to protect small diameter wires and hoses boost even when "pedaling". Protects up
up to 1100°F. Black. 1/2" I.D. x 24" Long. to 1200°F continuous/2000°F intermittent
temperatures. Fits T4 turbocharger flange,
V-band in and out turbines.

Hot Rod Sleeve Thermaflect Tape

Longer,10-foot bulk length of the popular Aluminized fiberglass cloth heat barrier tape.
Hose & Sleeve shield. Black. Available in a Protects up to 1100°F continuous/2000°F
variety of diameters. intermittent temperatures. Reflects up to
90% of radiant heat.
Part No. Description
HSP204011 3/8" I.D. Part No. Description
HSP204012 1/2" I.D. HSP340020 1-1/2" x 20 ft.
HSP204013 1/4" I.D. HSP340410 4" x 10 ft.
HSP204014 3/4" I.D.
HSP204018 1" I.D. Thermal Tie
These stainless steel locking ties are
Heat Sleeve with Carbon designed to secure insulation to exhaust
Fiber Look-Lava™ Tube components. Handles continuous
temperatures up to 1800°F. Special tools
HSP280010 not required.
A specially formulated fibrous
Part No. Description
thermal barrier weave created HSP351001 5/16"W x 8"L, 8-Pack
from volcanic rock, this tube HSP351007 5/16"W x 20"L, 6-Pack
shaped guard can protect
components up to 1200°F continuous/2000°F Lava™ Exhaust Wrap Kit
intermittent temperatures. Ideal for shielding turbo oil
lines, fuel lines, hydraulic lines, and other components HSP372051
adjacent to exhaust heat.1-1/2" ID. 36" long. Made in the A straightforward exhaust wrap kit
USA. that increases engine scavenging and
reduces underhood temperatures
up to 50%. includes stainless
steel ties. Protects up to 1200°F
continuous/2000°F intermittent
temperatures. 2" x 50 feet.
236 2023 - 2024 HOT ROD AND EARLY MUSCLE
Standard Series Hedders
Hedman Hedders include gaskets, bolts, reducers, and easy-to-follow instructions. Hedders listed in
application guide are painted black. Certain hedders are available with HTC coating on a special order basis.
Auto Auto Std. Std. Tube And
Application Year Engine Part No. Footnotes A/C P/S Column Floor Column Floor Collector Size
American Motors
Gremlin 1972-75 290-401 HED98310* 1, 6, 30, 45 Y Y Y Y Y Y 1-5/8", 3"
Javelin - AMX 1968-74 290-401 HED98310* 1, 6, 30, 45 Y Y Y Y Y Y 1-5/8", 3"
Buick
Regal 1978-87 283-400 HED68310* 1, 6, 45, 121, 131 Y Y Y Y N Y 1-1/2", 3"
Regal 1978-87 283-400 HED68600* 1, 6, 15, 45, 103, 121, 131 Y Y Y Y N N 1-5/8", 3"
Chevrolet
Camaro 1967-81 283-400 HED68270* 1, 6, 45, 49, 104, 121 7, 26 Y Y Y N Y 1-5/8", 3"
Camaro 1967-81 283-400 HED68600* 1, 6, 15, 45, 49, 103, 121 7, 26 Y Y Y N N 1-5/8", 3"
Camaro 1967-69 283-400 HED65003* 1, 6, 42, 45, 49, 103, 26 Y Y Y Y Y 1-3/4", 3"
Camaro 1970-81 283-400 HED65104* 1, 6, 42, 45, 103 26 Y Y Y Y Y 1-3/4", 3"
Camaro 1967-69 396-502 HED68190* 1, 20, 45, 49 Y N Y Y Y Y 1-3/4", 3"
Camaro 1967-81 396-502 HED68610* 1, 6, 15, 20, 45, 49 Y Y N Y Y N 1-5/8", 3"
Camaro 1970-81 396-502 HED65105* 1, 6, 45 N Y Y Y N Y 2", 3"
Camaro 1982-92 283-400 HED68460* 1, 6, 45, 103, 109, 121, 135 Y Y Y Y N N 1-5/8", 3"
Camaro 1982-92 283-400 HED68470* 1, 6, 15, 45, 103, 121 Y Y Y Y N Y 1-5/8", 3"
Camaro 1998-02 5.7L (LS1) HED68534* 1, 6, 45, Full Length Y Y N Y N Y 1-1/2"-1-5/8",3"
Chevelle/El Camino 1964-77 283-400 HED68290* 1, 6, 45, 49, 103 26 Y Y Y N Y 1-5/8", 3"
Chevelle/El Camino 1964-87 283-400 HED68600* 1, 6, 15, 45, 49, 103, 121 26 Y Y Y N N 1-5/8", 3"
Chevelle/El Camino 1964-77 396-502 HED68190* 1, 6, 20, 45, 49 Y Y Y Y N Y 1-3/4", 3"
Chevelle/El Camino 1968-77 396-502 HED68610* 1, 6, 15, 20, 45, 49 Y Y N Y N Y 1-3/4", 3"
Chevelle/El Camino 1978-87 283-400 HED68310* 1, 6, 45, 121 26 Y Y Y N Y 1-1/2", 3"
Chevelle/El Camino 1964-77 396-502 HED65002* 1, 6, 45, 49 N Y N Y N Y 2", 3"
Chevy II - Nova 1964-67 283-350 HED68160 1, 128 26 Y N Y N Y 1-1/2", 3"
Chevy II - Nova 1968-79 283-400 HED68270* 1, 6, 45, 49 N Y Y Y N Y 1-5/8", 3"
Chevy II - Nova 1968-79 283-400 HED68600* 1, 6, 15, 45, 49, 103 N Y Y Y N N 1-5/8", 3"
Chevy II - Nova 1968-74 283-400 HED65003* 1, 6, 42, 45, 49, 103 N Y N Y N Y 1-3/4", 3"
Chevy II - Nova 1968-74 396-502 HED68190* 1, 6, 20, 45, 49 Y N Y Y N Y 1-3/4", 3"
Chevy II - Nova 1968-79 396-502 HED68610* 1, 6, 15, 20, 45, 49 N N N Y N Y 1-3/4", 3"
Corvette 1962-82 283-400 HED66281† Long Tube, SIde Exit Y Y Y Y N Y 1-5/8", 3"
Corvette 1963-82 283-400 HED68300* 1, 6, 45, 100, 103 26 Y Y Y N Y 1-5/8", 3"
Corvette 1965-82 396-502 HED68090* 1, 6, 15, 45 Y Y Y Y N Y 2", 3"
Corvette 1963-82 396-502 HED68210* 1, 9, 20, 45 26 Y Y Y N Y 1-3/4", 3"
Corvette 1984-91 283-400 HED68440* 1, 6, 45,103,121 Y Y N Y N Y 1-5/8", 3"
Monte Carlo 1970-77 283-400 HED68290* 1, 6, 45, 103 26 Y Y Y N Y 1-5/8", 3"
Monte Carlo 1978-87 283-400 HED68310* 1, 6, 45, 104, 121 26 Y Y Y N Y 1-1/2", 3"
Monte Carlo 1970-87 283-400 HED68600* 1, 6, 15, 45, 103, 121 26 Y Y Y N N 1-5/8", 3"
Monte Carlo 1970-77 396-502 HED68610* 1, 6, 15, 20, 25, 45 Y Y N Y N Y 1-3/4", 3"
Dodge and Plymouth
Barracuda 1967-74 273-360 HED78050* 1, 13, 129 Y Y Y Y Y Y 1-5/8", 3"
Barracuda 1970-74 361-440 HED78030* 1, 129 Y Y Y Y Y Y 1-3/4", 3"
Challenger 1970-74 273-360 HED78050* 1, 6, 13, 45, 129 Y Y Y Y Y Y 1-5/8", 3"
Challenger 1970-74 361-440 HED78030* 1, 129 Y Y Y Y Y Y 1-3/4", 3"
Charger 1966-77 273-360 HED78050* 1, 6, 13, 45, 129 Y Y Y Y Y Y 1-5/8", 3"
Charger 1966-74 361-440 HED78030* 1, 129 Y Y Y Y Y Y 1-3/4", 3"
Duster 1970-76 273-360 HED78050* 1, 6, 13, 45 Y Y Y Y N Y 1-5/8", 3"
Road Runner 1968-74 361-440 HED78030* 1, 129 Y Y Y Y Y Y 1-3/4", 3"
Road Runner 1968-74 273-360 HED78050* 1, 6, 13, 45, 129 Y Y Y Y Y Y 1-5/8", 3"
Ford
Fairlane 1966-73 260-351W HED88300* 1, 108 Y 27 N Y N Y 1-5/8", 3"
Mustang 1979-93 5.0 Liter HED88390* Full Length Hedder Y Y Y Y N Y 1-5/8", 3"
Mustang 1964-73 260-302W HED88400* 1, 6, 15 Y Y N/A Y N/A Y 1-1/2", 2-1/2"
Mustang 1964-73 260-302W HED88300* 1, 19, 108 Y 27 N N N Y 1-5/8", 3"
Mustang 1964-73 260-302W HED88406† 1, 19, 108, Shorty Y Y N Y N N 1-1/2", 2-1/2"
Mustang 1969-73 351W HED88300* 1, 108 Y 27 Y Y N N 1-5/8", 3"
Mustang 1964-73 351W HED88650* 1, 15 Y Y N N N Y 1-5/8", 3"
Mustang 1979-93 302W-5.0L HED88390* Full Length Hedder Y Y Y Y N Y 1-5/8", 3"
Mustang (T.E.M.S.) 1986-93 5.0 Liter HED88600* Stock Replacement Y Y Y Y N Y 1-5/8", Stock
1, 129, 214, 221, 222,
Mustang 1964-73 351 Windsor (Swap) HED88658* Y Y N Y N Y 1-5/8", 3"
Mid-Length Hedder
Mustang 1970-73 351 Cleveland HED88326* 1, 107, 108, Long Hedder Y Y Y Y N N 1-5/8", 3"
Oldsmobile
442, Cutlass, F85 1968-76 400-455 HED58156† 1, 108, Long Hedder Y Y Y Y N Y 1-3/4", 3"
Note: All Hedman Hedders can be HTC coated, they may need to be special ordered if not in stock.
† Part listed is HTC coated.
* Not applicable or intended for street or highway use. Legal only for racing vehicles. Footnotes: Following Elite Series chart.

2023 - 2024 HOT ROD AND EARLY MUSCLE 237

Elite Series Hedders
Elite hedders are built with the finest materials, including heavy ceramic-coated 14-gauge tubing
and 3/8" thick flanges, and include gaskets, bolts, reducers, and instructions.
Auto Auto Std. Std.
Application Year Engine Part No Footnotes A/C P/S Tube Sizes
Column Floor Column Floor
Buick
Regal 1978-87 283-400 HED68608* 1, 6, 15, 45, 103, 131, 212 Y Y Y Y Y Y 1-5/8", 3"
Chevrolet
Camaro 1967-81 283-400 HED68278* 1, 6, 45, 49, 104, 121, 212 7, 26 Y Y Y N Y 1-5/8", 3"
Camaro 1967-81 283-400 HED68608* 1,6,15,45,49,103,121, 212 7, 26 Y Y Y N N 1-5/8", 3"
Camaro 1967-69 396-502 HED68198* 1, 20, 45, 49, 208, 213 Y N Y Y Y Y 1-3/4", 3"
Camaro 1967-81 396-502 HED68618* 1, 6, 15, 20, 45, 49, 208, 213 Y Y N Y N Y 1-3/4", 3"
Chevelle 1964-77 283-400 HED68298* 1, 6, 45, 49, 103, 212 26 Y Y Y N Y 1-5/8", 3"
Chevelle 1964-87 283-400 HED68608* 1, 6, 15, 45, 49, 103, 121, 212 26 Y Y Y N N 1-5/8", 3"
Chevelle 1964-77 396-502 HED68198* 1, 6, 20, 45, 49, 208, 213 Y Y Y Y N Y 1-3/4", 3"
Chevelle 1968-77 396-502 HED68618* 1, 6, 15, 20, 45, 49, 208, 213 Y Y N Y N Y 1-3/4", 3"
Nova 1968-79 283-400 HED68608* 1, 6, 15, 45, 49, 103, 212 N Y N Y N N 1-5/8", 3"
Nova 1968-74 396-502 HED68198* 1, 6, 20, 45, 49, 208, 213 Y N Y Y N Y 1-3/4", 3"
Nova 1968-79 396-502 HED68618* 1, 6, 15, 20, 45, 49, 208, 213 N N N Y N Y 1-3/4", 3"
Monte Carlo 1970-77 283-400 HED68298* 1, 6, 45, 103, 212 26 Y Y Y N Y 1-5/8", 3"
Monte Carlo 1970-87 283-400 HED68608* 1, 6, 15, 45, 103, 121, 212 26 Y Y Y N N 1-5/8", 3"
Monte Carlo 1970-77 396-502 HED68618* 1, 6, 15, 20, 25, 45, 208, 213 Y Y Y Y N Y 1-3/4", 3"
Full Size 1958-64 283-400 HED68238 103, 212 26 Y Y Y Y Y 1-5/8", 3"
Full Size 1965-70 396-502 HED68198 1, 20, 208, 213 Y Y Y Y Y Y 1-3/4", 3"
Full Size 1965-74 396-502 HED68618 1, 6, 15, 20, 45, 208, 213 Y Y N Y N Y 1-3/4", 3"
Full Size 1971-94 283-400 HED68298* 1, 6, 45, 103, 121, 212 26 Y Y Y N N 1-5/8", 3"
Full Size 1971-94 283-400 HED68608* 1, 6, 15, 45, 49, 103, 121, 212 26 Y Y Y N N 1-5/8", 3"
Corvette 1963-82 283-400 HED68308* 1, 6, 45, 100, 103, 212 26 Y Y Y N Y 1-5/8", 3"
Dodge And Plymouth
Barracuda 1970-74 361-440 HED78038 1, 129 Y Y Y Y Y Y 1-3/4", 3"
Belvedere 1967-74 361-440 HED78038 1, 129 Y Y N Y N Y 1-3/4", 3"
Challenger 1970-74 361-440 HED78038 1, 129 Y Y Y Y Y Y 1-3/4", 3"
Charger 1966-74 361-440 HED78038 1, 129 Y Y Y Y Y Y 1-3/4", 3"
Road Runner 1968-74 361-440 HED78038 1, 129 Y Y Y Y Y Y 1-3/4", 3"
Super Bee 1967-74 361-440 HED78038 1, 129 Y Y Y Y Y Y 1-3/4", 3"
Ford
Fairlane 1966-73 260-351W HED88308 1, 108, 204 Y 27 N Y N Y 1-5/8", 3"
Fairlane 1966-73 260-351W HED88408 1, 6, 15, 42 Y Y N Y N N 1-1/2", 2-1/2"
Falcon 1962-70 260-302W HED88408 1, 6, 15, 42 Y Y N Y N N 1-1/2", 2-1/2"
Falcon 1966-69 260-302W HED88308 1, 108, 204 Y 27 N Y N Y 1-5/8", 3"
Maverick 1969-77 260-302W HED88308 1, 6 Y 27 N Y N Y 1-5/8", 3"
Maverick 1969-77 260-302W HED88408 1, 6, 15, 42 Y 27 N Y N N 1-1/2", 2-1/2"
Mustang 1964-73 260-302W HED88308 1, 19, 108 Y 27 N Y N Y 1-5/8", 3"
Mustang 1969-73 351W HED88308 1, 108 Y Y N Y N N 1-5/8", 3"
Mustang 1964-73 260-302W HED88408 1, 6, 15, 42 Y Y N Y N N 1-1/2", 2-1/2"
Torino 1966-73 260-351W HED88308 1, 108 Y 27 N Y N Y 1-5/8", 3"
Cougar 1964-73 260-302W HED88408 1, 6, 15, 42 Y Y N Y N Y 1-1/2", 2-1/2"
Cougar 1967-73 260-302W HED88308 1, 19, 108 Y 27 N Y N N 1-5/8", 3"
Pontiac
Grand Prix 1978-87 283-400 HED68608* 1, 6, 15, 45, 103, 131, 212 Y Y Y Y N N 1-5/8", 3"
* Not applicable or intended for street or highway use. Legal only for racing vehicles.

Footnotes: 100 Will Not Fit with Steering Damper Inside Front Crossmember.
0 T.E.M.S.tm Tubular Exhaust Manifold System. 103 Will Fit with Angle Plug Heads. (Chevy Aluminum Only.)
1 Without Smog Injection or Injection Heads. 104 On Some Models It May Be Necessary to Remove Z Bars (Ss Series).
6 Modification to Stock Exhaust Required to Retain Catalytic Converter. 108 With Automatic Transmission, C-4 Only.
7 Will Not Fit 1967-69 Camaro with A/C. 109 Dual Exhaust Only, Limited Ground Clearance.
9 Factory Side Exhaust, Cut and Welding Required. 121 Must Modify Rotary A/C Bracket.
13 A-Type Engine Only. Fits 1964-67 Models with Factory Stock Transmissions and
128
15 Shortie Style Hedder (Maximum Ground Clearance). 153-Tooth Flywheel Only.
19 Will Not Fit 1971-73 with Stick Shift. 129 Modification to Shift Linkage May Be Required.
20 Not Recommended for Use with Aluminum Heads. 131 Chevy Engine
25 Engine Swap, All Parts Must Be Factory Stock. 135 Transmission Limited to 700R-4 Or Th-350.
A/C Equipped Vehicles Require Bracket Hed20110. 157 When Equipped with 4-Speed, Will Not Fit Top Loader.
26
(Large Piston-Type Compressor) 204 With EGR.
27 Power Steering Bracket Hed20120 Required. Due yo Cylinder Heads (Aluminum), Gen 6 Engines,
208 502 Big Block Chevy May Have Clearance Problems. Bottom of Header
30 Dog Leg Port Only. Flanges May Hit Head Bolts (Notching May Be Necessary).
42 Square Port Hedder, Will Not Fit D-Port. 212 Use Elite Replacement Gasket HED27520.
Not Legal for Sale or Use in California 213 Use Elite Replacement Gasket HED27550.
45
On Pollution Controlled Motor Vehicles. 221 Engine Must Be Centered between the Rails.
49 Will Not Fit (Saginaw) P/S Close Ratio. 222 Modifications to Clutch Linkage May Be Required.

238 2023 - 2024 HOT ROD AND EARLY MUSCLE

Hot Rodz Hedders for Non-Factory Engine/Vehicle Combinations
Hedman’s line of Hot Rodz Hedders was developed to help Hot Rodders solve the problem of finding
headers to fit those engine/vehicle combinations that the factory didn’t offer. Available with
multiple finish options and designed to allow for options such as power steering, A/C, and manual or
automatic transmissions, Hot Rodz Hedders make that custom build a little easier.
Transmission
Automatic Standard Standard-Duty Hedders
Footnotes
Tube Tube Collector on Page Black
Application Year Engine Style Dia. Size A/C P/S Column Floor Column Floor 238 Uncoated HTC Silver Maxx
Chevy/GM Passenger Cars
LS
Camaro 67-69 Mid 1-3/4" 3" Y Y N Y N Y 45 HED68710 HED68716 HED68713
Series
LS
Camaro 70-81 Mid 1-3/4" 3" Y Y N Y N Y 45 HED68720 HED68726 HED68723
Series
300,
LS
Camaro 70-81 Mid 1-5/8" — Y Y N Y N Y Cast Iron HED68740 — —
Series
Manifolds
Chevelle, LS
64-67 Mid 1-1/2" 2-1/2" — — — — — — 231 HED68540 — HED68543
El Camino Series
300,
Chevelle, LS
64-67 Mid 1-5/8" — Y Y N Y N Y Cast Iron HED68740 — —
El Camino Series
Manifolds
Chevelle, LS
68-72 Mid 1-3/4" 3" Y Y Y Y N N — HED68140 HED68146 —
El Camino Series
Chevelle, LS
68-72 Long 1-3/4" 3" Y Y Y Y N N — HED68150 — —
El Camino Series
Chevelle, LS
78-88 Mid 1-3/4" 3" Y Y Y Y N Y 45 HED68020 HED68026 HED68023
El Camino Series
Chevy Trucks
LS
S-10.S15 2WD 82-04 Mid 1-1/2" 2-1/2" Y Y N Y N Y 45,51,123 HED69040 — HED69043
Series
LS
S-10.S15 2WD 82-04 Long 1-1/2" 3" Y Y N Y N Y 45,51,123 HED69050 — —
Series
1/2 -1-Ton Truck LS
67-87 Mid 1-3/4" 3" Y Y N Y N Y 45 HED69710 HED69716 HED69713
(2WD Only) Series

Early Model Chevy 1/2 -Ton 2WD Truck 2WD Street Headers
Increase low-end torque, improve throttle response, and improve fuel economy thanks
to maximized exhaust flow. Made in USA. Lifetime warranty. For Chevy 1/2-ton truck
with 283-400 CID.
Part No. Description
HED69010 1967-87, Mid Length, 1-5/8" Diameter, 3" Collector, Bare
HED69016 1967-87, Mid Length, 1-5/8" Diameter, 3" Collector, HTC Coated
HED69020 1967-87, Mid Length, 1-3/4" Diameter, 3" Collector, Bare
HED69080 1967-91, Long, 1-3/4" Diameter, 3" Collector, Bare
HED69086 1967-91, Long, 1-3/4" Diameter, 3" Collector, HTC Coated
HED69088 1967-91, Long, 1-3/4" Diameter, 3" Collector, Elite HD
HED69090 1967-91, Long, 1-5/8" Diameter, 3" Collector, Bare
HED69096 1967-91, Long, 1-5/8" Diameter, 3" Collector, HTC Coated

Street Hedders
Choose from two finishes—painted or HTC coated—and two Hedder designs
Block Huggers or Tight Tubes. Tight Tubes use a unique, flat collector and tuck in closer
than “Hugger” type hedders to create maximum room for steering, motor mounts, etc.
Tube And
Part No. Application Footnotes Collector Size
Black Painted Hedders HED68366
HED68360 Chevy 283-400 15 1-1/2", 2-1/2"
HED68400 Chevy 283-400 15, 103 1-5/8", 2-1/2" Footnotes
HED68500* Chevy 283-400 15, 103 1-5/8", 2-1/2" 13 “A” Type Engine Only
HED68510* Chevy 396-454, Rect. Port Head 15,151,208 2", 3" 15 Shortie Style Hedder
HED68370 Chevy 396-454, Rect. Port Head 15,208 1-3/4", 3" 51 Under Chassis Exit
HED88420 Ford 260-351W 15,126 1-1/2", 2-1/2" 103 Fit Angle Plug Heads (Chevy Aluminum Only)
HED78500* Chrysler 318-360 13,15,151 1-5/8", 2-1/2" 126 Must Use Mount Kit TRA9716
“HTC” Coated Hedders 151 Must Use Mini Starter
HED68366 Chevy 283-400 15 1-1/2", 2-1/2" Gen Vi 502 Will Have Clearance Problem Involving Spark Plugs,
HED68506* Chevy 283-400 1,15 1-5/8", 2-1/2" 208 Wires, Starter, and Frames on Some Applications. Bottom of
* Tight tubes design Flanges May Hit Head Bolts. Notching May Be Necessary.

2023 - 2024 HOT ROD AND EARLY MUSCLE 239

Replacement Catalytic Converter Y-Pipes Hedder Reducers
Y-pipes fit Camaros Available in 16-gauge mild
and Firebirds (Z28 and steel or aluminized steel HED21100
Trans-Am) listed in with bright zinc flanges. Sold two per
chart. HED17478 package with necessary flanges, gaskets, and hardware.
Collector Fit Standard Reducers with O2
Part No. Year Engine Pipe Size Reducers Sensor Bung
Style Hedders
HED17470† 1982-92 5.0/5.7L 2-1/4" To 2-1/2" Gasket HED68470 Flange 3-Bolt Ball and 3-Bolt Ball and
HED17478† 1982-92 5.0/5.7L 2-1/4" To 2-1/2" Ball — Description Thickness Flange Socket Flange Socket
† Tubular Exhaust Manifold System (T.E.M.S.™) Mild Steel Reducers
3" Collector to
2-1/4" Exhaust 1/4" HED21100 HED21114 HED21107 HED21117
X-TREME Exhaust Equalizer Systems Tube
3" Collector to
HED18830 2-1/2" Exhaust 1/4" HED21103 HED21115 HED21142 HED21143
The universal fit 3" Tube
diameter X-TREME 3" Collector to
1/4" — HED21119 HED21133 HED21134
equalizer system 3" Exhaust Tube
splits exhaust flow 3-1/2" Collector
to 2-1/2" 1/4" HED21104 — — —
so the pressure Exhaust Tube
on both banks will Aluminized Reducers
be equal and pulse-free after crossover, regardless of 3" Collector to
RPM. The volumetric efficiency of the exhaust system is 2-1/2" Exhaust 5/16" HED21110 HED21112 — —
improved at all engine speeds, which means more power! Tube

Tailpipe Tips
Single outlet with resonator.
Exhaust Cutouts
Part No. Description HED17120
Cutouts plumb right into the HED17120 9" Length, 2" Inlet 2-1/2" Outlet
exhaust system behind collector HED17121 9" Length, 2-1/4" Inlet, 2-1/2" Outlet
and allow quick opening of street HED17122 9" Length, 2-1/2" Inlet, 2-1/2" Outlet
Hedders for competition use.
Sold in pairs. 90° Bends
Part No. Description
Tube Size
HED16250 2-1/2" Diameter Easy Open Exhaust Cutout Part No. Diameter O.D. Radius Leg Length
HED16300 3" Diameter Easy Open Exhaust Cutout HED12010 1-1/2" 2-1/4" 3-1/2" - 17-1/2"
HED12011 1-5/8" 2-1/2" 3-1/2" - 17"
HED12014 2" 3" 3-1/2" - 16"
HED21151 HED12015 2-1/8" 3-1/4" 4" - 15-1/2"
Ball-and-Socket Exhaust HED12016 2-1/4" 3-3/8" 5" - 14-1/2"
HED12017
Flange Kit HED12018
2-3/8"
2-1/2"
3-3/4"
4"
4-1/2" - 11"
9" - 16"
Turn any exhaust connection HED12007 3" 6" 6-1/2" - 8-1/2"
into a hassle-free, gasket-free
connection. Available in mild, 120° Bends
aluminized, or 304 stainless
steel. Hardware included. Tube Size
Part No. Diameter O.D. Radius Leg Length
Flange Mild Aluminized Stainess HED12076 1-7/8" 3" 3-1/2" - 14-1/2"
Diameter Gauge Thickness Steel Steel Steel HED12079 2-1/4" 3-3/8" 5" - 12-1/2"
2-1/2" 16 5/16" HED21151 HED21153 —
HED12080 2-3/8" 3-3/4" 4-1/2" - 12-1/2"
3" 16 5/16" HED21152 HED21154 HED21156

180° Bends
Stainless Steel Headers for LS Swaps
Designed specifically for Tube Size
Diameter
providing proper clearance Part No. O.D. Radius Leg Length
and fit for LS engine swap HED12053 1-1/2" 2-1/4" 3-1/2" - 14"
projects, these mid-length HED12054 1-5/8" 2-1/2" 3-1/2" - 13-1/2"
stainless steel headers HED12055 1-3/4" 3" 3-1/2" - 11-1/2"
feature 1-3/4" primaries HED12056 1-7/8" 3" 3-1/2" - 12"
HED12057 2" 3" 3-1/2" - 12"
and 3" collectors. Available
HED12058 2-1/8" 3-1/4" 4" - 11"
in natural or HTC silver HED12059 2-1/4" 3-3/8" 5" - 10"
ceramic-coated finish. HED12060 2-3/8" 3-3/4" 4-1/2" - 8-1/2"
Part No. Description HED12061 2-1/2" 4" 7-1/2" - 11"
HED62710 1967-69 Camaro w/ LS, Natural Stainless HED12063 3" 6" 6-1/2" - 6-1/2"
HED62740 1967-87 C10/C20 2WD Truck/SUV w/ LS, Natural Stainless
1967-87 C10/C20 2WD Truck/SUV w/ LS, Stainless w/ HTC
HED62746
Ceramic Coating

240 2023 - 2024 HOT ROD AND EARLY MUSCLE

 Tubular Upper A-Arms
Dropped Spindles
HEICA-101
HEISP-101-K Tubular control arms are
Heat-treated 1045 alloy steel a direct replacement for
Mustang II 2" dropped spindle stock items and provide
uses stock rotors, bearings, more clearance for stock
calipers, etc. for ease of sheet metal. Plain steel
installation. Pair. or stainless steel arms
are heli-arc welded for
Coil-Over Mustang II maximum strength and
Lower Control Arms appearance. Upper A-arms are fully assembled including
ball joints, bushings, and cross shafts. Arms fit Heidt’s
HEICA-103-M-S Mustang II IFS kits as well as most others.
Tubular mild steel arms will
accept any standard aftermarket Mustang II Upper
coil-over with sway bar mount
shock. Control Arm T-Bolt Kit
HEIMP-001-A
Adjustable Power Steering Valve
HEIPS-101 Mustang II
A turn of the knob is all it takes to fine tune Stainless Steel
the feel and responsiveness of the steering.
Tie Rod Ends
Motor Mounts HEIMP-017-SS
Sold in pairs.
HEIMM-130
Motor mounts are for the
Mustang II crossmember
and fit small block Ford Mustang II
installations. Trim to fit. Steering Rack Extension
Pair. HEIMP-037-1-4
Extends the Mustang
Power Steering II manual steering
Rack and Pinion Assembly rack for applications
where additional length
HEIMP-038-3-K is needed. Includes
extensions, boots, and clamps.

Front Suspension Kit for 19641/2-70 Mustang

HEIPM-320-E-K
New Mustang-style power rack and pinion, includes Modernize and
bushings. 3/4"-36. dramatically
improve handling
Motor Mount Kit for 19641/2-70 Mustang performance with
this independent
HEIMM-263 front suspension kit. Complete kit includes front
Bolt-on motor mount crossmember, 11'' iron rotors with single piston calipers,
kit with motor stands tubular control arms, shocks and springs, 2'' drop
includes bushings and spindles, and manual rack and pinion steering. Red
installation hardware. powder-coated steel crossmember.
Natural steel. For
19641/2-70 Mustang
with SBF. Nova Inner Fender Panels
HEICX-325
Mustang II Inner fender panels are a
great way to complete the
Steering Spacer 1962-65 Nova subframe
HEIMP-023 installation. Panels bolt
Steering rack spacer for Mustang II power rack-and- directly to the fenders, core
pinion. 3/4" diameter. support, and frame rails, and
include hood hinge mounting
plates, firewall seals, and
hardware. Sold in pairs.

2023 - 2024 HOT ROD AND EARLY MUSCLE 241

1967-87 Chevy C-10 4-Link Bolt-In Rear 1967-87 Chevy C-10 Bolt-On Independent Front
HEIRB-114 Suspension Kit
Improve the handling of HEIBX-660
1967-87 C-10 trucks with
Heavy-duty series
this 4-link bolt-in rear
independent front
end kit. With a 64” track,
suspension kit
adjustable ride height,
features a one-
double-adjustable link
piece 7-gauge HRPO steel crossmember with internal
tubes, and an adjustable 3-position pan hard bar, it improves
gussets, designed as a direct bolt-in replacement for
responsiveness. Additional features include 1” rod ends, billet
the factory crossmember. Kit includes crossmember,
aluminum shock mounts, billet coil-over Pro-G shocks, and an
A-arms, coil-over shocks, brakes, spindles, and steering
optional fabricated housing with an integrated drive shaft loop.
rack. Additional options are available.
Designed to fit factory coil spring trucks. Additional fabrication
required for trucks with factory leaf springs. Note: Short bed frames may require additional modifications for fit.

Tubular Sway Bars

Reduced body roll means better vehicle control and greatly improved traction for cornering. Developed and engineered for
a particular application, the Hellwig sway bar is a fast, easy bolt-in installation and is made of high-strength DOM steel with
polyurethane bushings installed. Rear bars have three-point adjustability.
Bar
Make Year Front Sway Bar Diameter Rear Sway Bar Bar Diameter
Chevrolet/GMC
A-Body 1973-77 HEL55703 1-5/16" — —
A-Body (Pro Touring) 1964-67 HEL55703 1-5/16" — 1-1/8"
A-Body (Pro Touring) 1968-72 HEL55703 1-5/16" HEL55868 Adjustable Rear Sway Bar 1-1/8"
A-Body (Pro Touring) 1973-77 HEL55703 1-5/16" — 1-1/8"
A/G Body 1978-88 — 1-5/16" HEL55809 1"
Camaro, Firebird (Pro Touring) 1967-69 HEL55705 1-1/8" HEL55824 3/4"
Camaro, Firebird (Pro Touring) 1970-81 HEL55703 1-5/16" HEL5816 3/4"
X-Body (Pro Touring) 1968-74 HEL55705 1-1/8" HEL55824 3/4"
X-Body (Pro Touring) 1975-79 HEL55703 1-5/16" HEL55824 3/4"
Notes: 1964-72 GM A Body Models: Chevelle, Malibu, El Camino, Monte Carlo, Cutlass, F85, LeMans, GTO, Skylark. 1973-77 GM A Body Models: Regal, Century, Chevelle, Malibu, Monte Carlo, Cutlass, LeMans, El
Camino, F85, Grand Prix, Grand Am. 1978-88 GM A/G-Body Models: Regal, Century, Grand National, Malibu, Monte Carlo, Cutlass, LeMans, Grand Prix. 1968-79 GM X-Body Models: Nova, Ventura, Apollo, Skylark,
Omega.

Tubular Sway Bars

Reduced body roll means better vehicle control and greatly improved HEL6706
traction for cornering. Developed and engineered for a particular
application, the Hellwig Sway Bar is a fast, easy bolt-in installation and is
made of high-strength DOM steel with polyurethane bushings installed. Rear bars have three point adjustability.
Front Bar Bar
Make Year Sway Bar Diameter Diameter
Ford
Mustang-Adjustable Rear Sway bar 1965-66 HEL6706 1-1/8" 3/4"
Mustang, Cougar-Adjustable Rear Sway bar 1967-70 HEL6707 1-1/8" 3/4"
Mustang, Cougar-Adjustable Rear Sway bar 1971-73 — 1-1/8" 3/4"
Falcon, Comet-Adjustable Rear Sway bar 1963-65 HEL6706 1-1/8" 3/4"
Falcon, Comet-Adjustable Rear Sway bar 1966-70 HEL6707 1-1/8" 3/4"
Fairlane, Torino, Montego, Ranchero 1966-69 HEL6707 1-1/8" —
Fairlane, Torino, Montego, Ranchero 1970-71 — 1-1/8" —
Dodge, Chrysler, Plymouth
Mopar B-Body 1971-72 HEL55904 1-1/4" 7/8"
Mopar B-Body 1970 HEL55904 1-1/4" 7/8"
Mopar B-Body 1964-69 HEL55903 1-3/8" 7/8"
Mopar A-Body 1973-76 HEL55905 1-1/8" 3/4"
Mopar A-Body 1967-72 — 1-1/4" 3/4"
Mopar A-Body (Pro Touring FSB) Provides clearance for 18" wheels with up to 5-3/4" backspace
1967-72 HEL55917 1-1/4" 3/4"
(WILL NOT FIT FACTORY END LINK TABS)
Mopar A-Body 1963-66 — 1-1/4" 3/4"
Mopar E-Body 1970-74 HEL55904 1-1/4" —
Notes: Mopar A-Body: Dart, Duster, Valiant, Demon, Swinger, Scamp, 1964-69 Barracuda. Mopar B-Body: Charger, Super Bee, GTX, Road Runner, Belvedere, Coronet, & Satallite. Mopar E-Body: 1970-74 Challenger
& Cuda.

242 2023 - 2024 HOT ROD AND EARLY MUSCLE

Ultra Double Pumper Carburetors Ultra Street HLY0-86670BL
Holley’s best all-around Avenger Carburetors
carburetors, in a variety of CFM Anodized billet aluminum metering blocks/base plate
ratings, are now offered in a new, provide great looks and gasket sealing. Features include
“retro-style” package for good an optimized street calibration that works out of the box,
looks and a tie to the company’s and a factory preset electric choke for easy starting of
rich heritage. vehicles. The quick-change vacuum housing cap allows
Part No. Description you to tune for performance or fuel economy (springs
HLY0-76650BK 650 CFM, Black included).
HLY0-76650BL 650 CFM, Blue
Part No. Description
HLY0-76750BK 750 CFM, Black
HLY0-86670BK 670 CFM, Black
HLY0-76750BL 750 CFM, Blue
HLY0-86670BL 670 CFM, Blue
HLY0-76750RD 750 CFM, Red
HLY0-86770BK 770 CFM, Black

850 CFM Ultra Double Pumper Street Avenger Series

Carburetor 4150 Carburetors
Featuring an optimized street/
Better throttle response,
strip calibration that works
acceleration and economy.
out-of-the-box. Four corner idle
“No trouble” technology offers
allows you to precisely control
power valve protection, easily
your idle system. Built in, clear
adjusted floats, adjustable HLY0-80570
fuel level sight glass for easy fuel
vacuum advance, 4 vacuum ports, Ford A/T kickdown,
level adjustments. Mechanical
and secondary fuel filters. (Dual inlet fuel line HLY34-150
secondaries. 100% wet-flow tested by Holley technicians
is available separately).
to assure it arrives ready to run!
Part No. Description
Part No. Description HLY0-80570 570 CFM, Electric Choke
Electric Choke
HLY0-81570 570 CFM, Manual Choke
HLY0-76850BK Black Billet
HLY0-80670 670 CFM, Electric Choke
HLY0-76850HB Hard Core Gray & Black Billet
HLY0-81670 670 CFM, Manual Choke
HLY0-80770 770 CFM, Electric Choke
Double Pumper 4150 Carburetors HLY0-81770 770 CFM, Manual Choke
HLY0-80870 870 CFM, Electric Choke

Standard Silver Universal

Finish HLY0-3310S
4160 Carburetors
The Holley 4160 Series carb with a
silver exterior. Vacuum secondaries
use metering plates and no jets,
Shiny
Finish
power valves, or accelerator pumps.
All metal parts.
Carbs are calibrated for out-of-the-box performance.
Mechanical secondaries. Part No. Description
600 CFM, Manual Choke, Fast Idle Adjustment,
Description Standard Part No. Shiny Part No. HLY0-1850S
Single Inlet
600 CFM Manual Choke HLY0-4776C HLY0-4776S 600 CFM, Electric Choke,
650 CFM Manual Choke HLY0-4777C HLY0-4777S HLY0-80457S
Ford Auto. Trans. Kickdown, Single Inlet
700 CFM Manual Choke HLY0-4778C ­— 750 CFM, Manual Choke,
750 CFM Manual Choke HLY0-4779C HLY0-4779S HLY0-3310S
Fast Idle Cam and Speed Adjustment, Dual Inlet
800 CFM Manual Choke HLY0-4780C ­— 750 CFM, Electric Choke,
HLY0-80508S
850 CFM Manual Choke HLY0-4781C HLY0-4781S Ford Auto. Trans. Kickdown, Dual Inlet

2023 - 2024 HOT ROD AND EARLY MUSCLE 243

Aluminum Street Avenger Aluminum Street
Carburetors Carburetors
Street carburetion taken to the next The tried and true Holley
level! The Aluminum Street Avenger single inlet vacuum secondary
carburetors save weight and look and carburetor is now available in
perform fantastically. Only 7.85 pounds, aluminum. Offering a weight
the feature a tumble polished exterior to HLY0-83770 savings of over five pounds,
keep them looking new for a long time. the aluminum carbs feature an HLY0-80459SA
Avenger features include vacuum ports, electric choke.
quick-change vacuum secondaries, built-in fuel filters, Part No. Description
and factory set electric choke. HLY0-80458SA 600 CFM, Electric Choke, V-Bowl
Part No. Description HLY0-80459SA 750 CFM, Electric Choke, Square Bowl
HLY0-83770 770 CFM Aluminum Street Avenger, Electric Choke
Chrysler Six-Pack
Street HP 4150 Replacement HLY0-4365-1
Series Carburetors Carburetors
Double pump carburetors have Original list number
contoured venturi inlets for carburetors remain
maximum air flow, adjustable air available for highly
bleeds, dual inlet, dual accelerator collectible muscle cars
pumps, power valve blowout protection, including popular Chrysler
and a shiny tumble-polished finish. six-pack applications.
Part No. Description Nearly exact reproductions
HLY0-82751 750 CFM Mechanical Secondaries of the originals.
Part No. Description
Aluminum Ultra HP Carburetors HLY0-4144-1 350 CFM "Center" Carb for 1969-70 Chrysler 440 CI Engine
All-aluminum Ultra HP carburetors offer 30 new upgrades HLY0-4365-1
500 CFM "Outboard" Carb for 1969-70 Chrysler
over traditional 4150 HP carbs including redesigned fuel 440 CI Engine
bowls with a 20% increase in capacity, billet base plates HLY0-4670 350 CFM "Center" Carb for 1970-71 Chrysler 340 CI Engine
HLY0-4672 500 CFM "Outboard" Carb for 1971 Chrysler 440 CI Engine
and metering blocks, adjustable metering blocks, a race-
only throttle lever, a choice of progressive or 1:1 linkage
and dual bolt pattern mounting holes. Main bodies have Sniper EFI Self-Tuning Kit
integrated idle bypass valves and the air bleeds have This economically priced self-tuning
been moved outward for a smoother transition of air flow. kit takes the guesswork out of
Carburetors are available anodized in Hard Core Gray with installing and tuning an EFI system.
black billet metering blocks and base plates, or in natural, Designed to fit single and dual four-
tumble-polished (shiny) with black or red metering blocks barrel carb manifolds. With the four- HLY550-510
and base plate. All require dual-feed fuel lines with a 9.75" injector version capable of handling
center distance. up to 650 HP, these kits are ideal for street rods, muscle
cars, and off-road trucks. Outstanding features include
throttle body-mounted ECU, integrated fuel pressure
regulator and hand held EFI monitor. Installation is simple
and easy with 4-wire hook-up, wide-band oxygen sensor,
and an easy-to-use calibration program. Available in
shiny or popular black ceramic finish.
Part No. Description
Part No. Description HLY550-510 Sniper EFI Tuning Kit, Shiny Finish
HLY0-80802HBX 650 CFM Carburetor, Hard Core Gray with Black Billet HLY550-511 Sniper EFI Tuning Kit, Black Ceramic Finish
HLY0-80803BKX 750 CFM Carburetor, Shiny with Black Billet
HLY0-80803HBX 750 CFM Carburetor, Hard Core Gray with Black Billet EFI Camshaft Sync System
HLY0-80804BKX 850 CFM Carburetor, Shiny with Black Billet
HLY0-80804HBX 850 CFM Carburetor, Hard Core Gray with Black Billet
for Belt Drive Kits
HLY0-80804RDX 850 CFM Carburetor, Shiny with Red Billet HLY556-114
HLY0-80805BKX 950 CFM Carburetor, Shiny with Black Billet Big block Chevy, standard cam
HLY0-80805HBX 950 CFM Carburetor, Hard Core Gray with Black Billet height. The kit will provide a plug-
HLY0-80805RDX 950 CFM Carburetor, Shiny with Red Billet
and-play cam position signal to
Note: New longer fuel line required. Use Earl’s AT104195, AT104286, or AT104295 Holley EFI systems as well any
EFI system that reads a digital
square-wave cam input signal. The bracket assembly
allows for mounting in a variety of locations. This system
is designed for use with Jesel and similar external, dry
timing belt, cam-drive systems. The components in the
kit include a 3-wire Hall Effect sensor, a billet aluminum
bracket, mounting hardware, a mating connector, and a
stainless steel flying magnet screw.

244 2023 - 2024 HOT ROD AND EARLY MUSCLE

Sniper EFI 2300 Self-Tuning Kits Sniper EFI Quadrajet™ Kits
HLY550-849
Advanced Sniper EFI throttle body fuel These bolt-on Quadrajet™ EFI kits are
injection unit features a Holley model capable of supporting up to 500
2300 flange, allowing it to directly horsepower with four 100 lb./hr.
replace the popular 2bbl carburetor injectors. Designed with a self-
found on many Fairlanes, Mustangs, tuning ECU that eliminates
Cougars, F-100’s, and more. Affordable the need for a computer or
EFI kits put an end to cold starting, laptop for initial setup, tuning,
hesitating, vapor lock, and flooding issues. and changing gauge displays
Easily installed unit requires just four wiring on the 3.5" high-resolution HLY550-868
connections, while the internal fuel pressure full-color touchscreen. No additional adapters, sealing
regulator simplifies plumbing. Use the Calibration plates, or intake swaps are required and most stock
Wizard's full-color high-resolution touchscreen to create Q-Jet air cleaners fit with no modification. Each kit
a base map for initial set-up. Choose the standard kit, or includes brake booster adapter, clamp-on oxygen
select the master kit to add an electric fuel pump, fuel sensor kit, Bosch oxygen sensor, and universal throttle/
filter, hose, fittings, and related hardware. Offered with kickdown bracket. Made in USA.
shiny, black ceramic, or classic gold finish. Part No. Description
Part No. Description HLY550-867 Shiny Finish
HLY550-849 Self-Tuning Kit, Shiny Finish HLY550-868 Black Finish
HLY550-849K Self-Tuning Master Kit, Shiny Finish HLY550-869 Gold Finish
HLY550-850 Self-Tuning Kit, Black Ceramic Finish
HLY550-850K Self-Tuning Master Kit, Black Ceramic Finish In-Tank RetroFit
HLY550-851K Self-Tuning Master Kit, Classic Gold Finish
Fuel Modules
These drop-in kits are
1971-86 Jeep CJ 258ci 6-Cylinder designed to convert any
HLY12-130

Sniper EFI BBD Master Kit fuel cell or factory tank to

HLY550-858K an in-tank EFI fuel system.
Designed as a direct bolt-on The black anodized billet
replacement for the Carter BBD aluminum module with 1/4" NPT ports includes a billet
carburetor, this self-tuning, shiny pump hanger bracket to reduce vibration and low-
finish EFI system will support up to profile 1.275" thick above-the-tank design to fit where
350 horsepower via two 100 lb./hr. space is at a premium. Easily installed in any tank 6.5"
injectors. Includes throttle body- to 12" deep. These kits include Holley's revolutionary
mounted ECU, internal fuel pressure regulator (preset Hydramat® pickup assembly, taking the guess work out of
to 58.5 psi) and requires only four wiring connections pickup location. Available in 255 lph or 450 lph return or
ensure a clean, professional-looking installation. High- returnless style versions.
resolution 3.5" full-color touchscreen makes easy work Part No. Description
of initial setup, tuning, and maintaining gauge output HLY12-130 255 LPH, Return Style Kit
HLY12-131 255 LPH, Returnless Style Kit
displays. This master kit also includes 20 ft. of 3/8" vapor
HLY12-132 450 LPH, Return Style Kit
guard fuel hose, EFI fuel pump, filters, Bosch wideband
oxygen sensor, clamp-on oxygen sensor kit for 2.25"
exhaust pipe, and all required fittings to complete the
installation. Made in USA. Throttle Position Sensor Kit
HLY534-202
Terminator Stealth EFI with Install the new Holley
GM Transmission Control TPS kit and make it work
with modern electronic
Designed for V8 engines rated
overdrive transmissions
at 250-600 hp, the Terminator
like the 4L60E and
Stealth EFI provides the
4L80E. The sensor
reliability and simplicity of
supplies the needed
throttle body fuel injection with
signal to an electronic transmission and a carburetor. It
the look of a classic carburetor,
drives off the primary throttle shaft for accurate voltage
even with today’s modern fuels.
readings. All installation hardware and an instruction
Features a 4150-style 4bbl.
HLY550-443 guide are included.
mounting flange for direct
replacement of a stock carb, and includes a self-tuning
ECU and 3.5” touchscreen LCD for basic and advanced Fuel Pressure Gauges
tuning. An integrated timing control option for GM Small 1-1/2" diameter gauges have chromed
Cap HEI and Ford TFI distributors, as well as connections steel cases and 1/8"NPT brass fittings
for Ford, GM TH350, 700R4, and other transmission for use with Holley chromed fuel lines
linkages, make installation and setup easy. and fuel blocks.
Part No. Description Part No. Description HLY26-500
HLY550-443 Terminator Stealth EFI in Hard Core Gray HLY26-500 0-15 PSI
HLY550-442 Terminator Stealth EFI in Gold Polished

2023 - 2024 HOT ROD AND EARLY MUSCLE 245

Sniper EFI Fuel Tank System Kit Choke Conversion Kits
Holley and Sniper make (Electric and Hot Air)
EFI swaps even easier Convert Holley carburetors
with EFI conversion fuel originally equipped with hot
tanks. Direct fit tanks air or manually-operated
mean no modifications. chokes to full automatic/
Sender has 1/4”NPT HLY19-100 electric operation. For
supply and return ports for easy fuel carburetors with an
line connections, as well as a barbed vent fitting. The “internal vacuum source”
included fuel level sender has the correct Ohm range for such as HLY0-1850, HLY0- HLY45-223
the factory gauges. Fuel pump and sender are recessed 3310.
in the tank for easy installation, and EFI-style tank
Part No. Description
baffling includes a 4.3 liter internal tray to prevent fuel
HLY45-223 Standard Finish
pump starvation. These tanks are designed to fit and look HLY45-223S Shiny Finish
like OE tanks when installed, and are even available as
a notched tank for Gen 1 F-bodies with rear suspension
mods and oversize tires. Kit includes powder-coated Heat Shield
tank, 255 lph or 400 lph fuel pump , internal baffling, fuel HLY108-70
level sender, and new tank straps.
Shield fits all square-flange carbs.
Part No. Description
Kits with 255 LPH Fuel Pump
HLY19-100 1967-68 Chevy Camaro/Firebird Power Valves
HLY19-102 19641/2-68 Ford Mustang Single-stage, standard flow.
HLY19-104 1969 Chevy Camaro/Firebird Part No. Description
HLY19-105 1964-67 Chevelle/Malibu HLY125-25 2-1/2" Hg.
HLY19-107 1970-72 Chevelle Malibu HLY125-35 3-1/2" Hg.
HLY19-109 1955-56 Chevy Coupe Sedan HLY125-45 4-1/2" Hg.
HLY19-112 1962-65 Chevy II/Nova HLY125-50 5.0" Hg.
HLY19-117 1969-70 Ford Mustang HLY125-55 5-1/2" Hg. HLY125-65
HLY19-118 1961-64 Impala/Bel Air
HLY125-65 6-1/2" Hg.
HLY19-135 1970-76 Dodge Dart
HLY19-138 1968-70 Dodge Charger HLY125-75 7-1/2" Hg.
HLY19-140 1978-81 Chevy Camaro HLY125-85 8-1/2" Hg.
HLY19-144 1978-88 Chevy Monte Carlo HLY125-95 9-1/2" Hg.
HLY19-147 1963-67 Chevy Coupe/Sedan HLY125-105 10-1/2" Hg.
HLY19-148 1968-74 Corvette
Kits with 400 LPH Fuel Pump
HLY19-402 19641/2-68 Ford Mustang
Power Valve Check Valve Kit
HLY19-405 1964-67 Chevelle/Malibu HLY125-500
Power valve
Sniper EFI Stock Replacement Fuel Tank for “blow-out”
1974-81 GM G-Body protection
can be added
HLY19-504 to pre-1992
A direct replacement 4150 and 4160 Series
for the stock fuel tank, carbs. Kit includes a spring, brass seat, check ball, and
this 21-gallon steel tank instructions.
is powder-coated for
corrosion resistance.
Includes tank sending
Holley Standard Main Jets
unit lock ring. Tank Holley main jets are threaded for ease
straps NOT included. of installation. To order, use prefix
HLY122- followed by the two digit HLY122-40
number which denotes jet size.
Choke Kits Jet No. Hole Size Jet No. Hole Size Jet No. Hole Size
Choke kits for carburetors 40 .040" 57 .056" 71 .076"
with an “external vacuum 44 .044" 58 .057" 72 .079"
source” such as HLY0-4412, 45 .045" 59 .058" 73 .079"
HLY0-4776, HLY0-4777, 46 .046" 60 .060" 74 .081"
HLY0-4778, HLY0-4779, 47 .047" 61 .060" 75 .082"
HLY0-4780, HLY0-4781. 48 .048" 62 .061" 76 .084"
49 .048" 63 .062" 77 .086"
Part No. Description
50 .049" 64 .064" 78 .089"
HLY45-224 Standard Finish
51 .050" 65 .065" 79 .091"
HLY45-224S Shiny Finish
52 .052" 66 .066" 80 .093"
HLY45-224 53 .052" 67 .068" 81 .093"
54 .053" 68 .069" 82 .093"
55 .054" 69 .070"
56 .055" 70 .073"

246 2023 - 2024 HOT ROD AND EARLY MUSCLE

Chrome Fuel Lines GM Muscle Series
Use on any Holley model Air Cleaners
4150/4160 carburetor with HLY34-150 Holley’s GM Muscle series of
center hung “cathedral” fuel air cleaners are constructed
bowls. Lines have 5/8"-18 of die-cast aluminum with
inverted flare fuel fittings and a stamped steel SureFlo
1/8"NPT pressure gauge taps. style base with knockout
Part No. Description provisions for a fresh
HLY34-150 Fuel Line for 4150 Series Carburetor air adapter. The simple, HLY120-210
HLY34-160 Fuel Line for 4160 Series Carburetor modern style with raised GM
“Chevrolet” and “bowtie” logos. 14” diameter universal
HLY37-1542 round air cleaner is available in 3” or 4” filter heights, and
Quick Kits fits Holley 4150 and 4160 and other carburetors with 5.12”
The economical way diameter neck. Premium mesh-reinforced pleated cotton
to rebuild virtually any gauze filter element is pre-oiled and ready to install.
Holley 4bbl carburetor. Includes carburetor gasket and all mounting hardware.
Kits include fuel bowl Part No. Description
gaskets, metering HLY120-210 14"x3" w/Paper Filter Natural Machined
block gaskets, base HLY120-212 14"x3" w/Premium Filter Satin Black Machined
gaskets, throttle body HLY120-216 14"x3" w/Premium Filter Factory Orange Machine
gasket, accelerator HLY120-218 14"x3" w/Premium Filter Satin Natural Machined
pump diaphragm(s), needle and seat assemblies, power HLY120-220 14"x3" w/Premium Filter Satin Black Machined
valves, bowl screw gaskets, and instructions. HLY120-222 14"x3" w/Premium Filter Polished
HLY120-224 14"x3" w/Premium Filter Factory Orange Machine
Part No. Description HLY120-215 14"x4" w/Paper Filter Polished
HLY37-1542 Model 4160 Vacuum Secondary HLY120-219 14"x4" w/Premium Filter Natural Machined
HLY37-1544 Model 4150 Double Pumper HLY120-221 14"x4" w/Premium Filter Satin Black Machined
HLY120-223 14"x4" w/Premium Filter Polished
Jet Assortment Kit HLY120-225 14"x4" w/Premium Filter Factory Orange Machine
HLY36-181
The Holley jet assortment kit is the
professional way to tune a carburetor Vintage Series
for top performance. Kit contains two GM Licensed
each of 36 different jet sizes, ranging Air Cleaner
from 64 to 99, packaged in a plastic case Achieve a retro look with
to keep them organized for easy access. the Holley Vintage series of
air cleaners. GM licensed
Chrome Carburetor with classically inspired
Dress-Up Parts finned design and high-
definition retro branding,
Part No. Description
Chrome Throttle Cable Bracket and Dual they are available in a range
HLY20-88 of finishes. 14” diameter
Springs, Fits 4150 and 4160 Models
HLY120-166
HLY20-89 Stainless Dual Springs universal round die cast
aluminum air cleaner is available in 3” or 4” filter heights,
Chrome Round Air Cleaner HLY20-88 and fits Holley 4150 and 4160 and other carburetors with
5.12” diameter neck. Available with replacement paper
HLY120-146 filter or reusable red cotton gauge filter elements.
A longtime standard, Holley’s 14" Part No. Description
diameter triple-chrome-plated HLY120-166 14"x3" w/Premium Filter Polished
air cleaner is 3" tall and fits carbs HLY120-172 14"x3" w/Premium Filter Satin Black Machined
with the standard 5-1/8" neck. HLY120-174 14"x3" w/Premium Filter Polished
HLY120-176 14"x3" w/Premium Filter Factory Orange Machined
14" Round Finned Air HLY120-164
HLY120-173
14"x4" w/Paper Filter Satin Black Machined
14"x4" w/Premium Filter Satin Black Machined
Cleaner Assembly HLY120-175 14"x4" w/Premium Filter Polished
The 14" round finned air cleaner HLY120-177 14"x4" w/Premium Filter Factory Orange Machined
features a die-cast aluminum
cover, a stamped steel SureFlo
style base with knockout
provisions for a fresh air adapter,
a filter element, and includes
carb gasket as well as mounting
hardware. Fits Holley 4150 and
4160 carburetors with a 5-1/8" diameter neck.
Part No. Height Finish Element
HLY120-153 3" Black Oiled Cotton Gauze

2023 - 2024 HOT ROD AND EARLY MUSCLE 247

 HLY12-801-1 Electric In-Line Fuel Pumps
Electric Fuel Pumps For easier installation,
HLY12-920
Holley electric fuel pumps have been universal electric fuel
the industry standard for years. pumps install in-line, not
Recently redesigned, they are an in the fuel tank. Pumps
excellent choice for street or strip hot are designed for high-
rods. pressure fuel injection
Part No. Description applications, and are
HLY12-801-1 Red 97 GPH Fuel Pump, Pre-Set at 7 PSI rated for continuous-duty
Blue 110 GPH Fuel Pump, Pre-Set at 14 PSI,
HLY12-802-1
Includes HLY12-803 Regulator
service and have been tested up to 2,500 hours. Sold
HLY12-815-1 Black 140 GPH Fuel Pump, Pre-Set at 14 PSI complete with 3/8" barbed fittings, mounting clamps,
rubber isolator and required hardware.
Fuel Pressure Regulator Note: Pumps should be mounted below the fuel level of the tank for a good gravity feed on the
inlet side.
HLY12-803 Part No. Description
Used to regulate fuel pressure of high- HLY12-920 In-Line Fuel Pump, 80 GPH @ 15 PSI
pressure fuel pumps. HLY12-927 In-Line Fuel Pump, 43 GPH @ 15 PSI

High-Performance EFI Fuel Pressure Regulators

80 GPH Mechanical Fuel Pumps HLY512-501
High-performance fuel pumps offer great performance Chevy Camaro / Pontiac Firebird
with 80 GPH (free flow). The lower housing is adjustable 5.0L TPI. Dedicated EFI fuel
for 360° rotation of fuel inlet-outlet fittings. pressure regulators are designed to
Triple chrome plated. mount in the stock location, while
HLY12-834
allowing fuel pressure adjustment
Part No. Description
Chevrolet from 35-65 PSI Constructed from
HLY12-834 1958-78 Small Block Chevy durable, CNC-machined billet aluminum, regulators are
HLY12-835 1966-76 Big Block Chevy offered in clear coat finishes.
Ford/Mercury
HLY12-833 221, 260, 289, 302, 351W
Remote LS Coil
Street Avenger 110 GPH Relocation Brackets
Designed to eliminate coil-on-
Mechanical Fuel Pumps cover clutter, these lightweight
Holley’s high-output pumps use six high-flow valves to aluminum brackets include coil
ensure ad­e­quate and con­tin­u­ous flow up to 110 GPH (free mounting hardware. Sold in
flow). Pumps have 3/8" inlets and outlets. Body casting pairs, in black or natural finish.
can be rotated for easy plumbing. Regulator is not Coils not included. HLY561-123
required.
Part No. Description Coil Reference Numbers
Part No. Description HLY561-123 Natural Finish
HLY12-327-11 Chevy 283-400 HLY561-129 Black 12573190
HLY12-454-11 Chevy 396-454 HLY561-130 Black
HLY12-360-11 Chrysler 318-360
HLY12-440-11
HLY12-289-11
Chrysler 383-440
Ford 289-351W
Holley Smart Coil Remote
HLY12-390-11 Ford “FE” 390-428 Relocation Brackets
HLY12-460-11 Ford 429-460 HLY12-327-11 Made from lightweight
HLY12-389-11 Pontiac 326-455 aluminum, these convenient
brackets allow users to remote
Electric In-Tank Fuel mount Holley EFI Smart Coils
Pumps in the location of their choice.
High-output, in-tank fuel Available in black or natural HLY561-125
pumps use a proven, gerotor finish.
HLY12-914
design and are compact Part No. Description
enough to fit existing HLY561-125 Natural Finish
HLY561-131 Black
hanger assemblies. Pumps
are offered in 155, 190, and 255 lph (liters per hour) flow
ratings. Each pump is sold complete with all drop parts,
inlet filter for improved filtration, accessories, and
instructions.
255 LPH Forced Induction
Application Year Engine Part No.
1992-85 5.0L TPI HLY12-914
Chevrolet Camaro
1992-85 5.7L TPI HLY12-914

248 2023 - 2024 HOT ROD AND EARLY MUSCLE

Aluminum Tall LS Valve Covers GM Licensed Vintage Series
These aluminum valve SBC Valve Covers
covers feature angled Available in a variety of
coil mounts for a great finishes for your custom
high-tech look while build, these die-cast
eliminating OE-style coil aluminum valve covers
brackets. Include a billet feature a classically
aluminum oil fill cap and inspired finned design and
use original gaskets and high-definition retro Chevrolet
bolts. Fit all LS engines HLY241-110 script logo. Designed to fit all 1958-86
using LS1, LS2, LS3, LS6, small block Chevy engines with a perimeter
and LS7 or similar coils with 72mm bolt spacing. Available bolt pattern, they are 3.3” high with a solid body for non-
in polished, satin black, gloss red, and natural cast. emissions applications custom crankcase ventilation
Part No. Description setups.
HLY241-110 Natural Cast
Part No. Description
HLY241-111 Polished
HLY241-106 Natural Cast Finish
HLY241-112 Satin Black
HLY241-107 Polished
HLY241-113 Gloss Red
HLY241-108 Black
HLY241-109 Orange

Tall LS Valve Covers Small Block Chevy Vintage Style

With an additional 0.54”
of internal clearance
HLY241-402 Finned Die-Cast Aluminum Valve Covers
over factory-height HLY241-242
valve covers, these The die-cast finned
tall LS valve covers aluminum construction
eliminate the OE creates a small block Chevy
coil-on-cover look and retro look while reducing
instead features a bold valve cover flange warping that
Chevrolet and Bowtie or lead to oil leaks. The 3-1/2" tall valve
LSX logo. Designed to HLY241-405 covers feature pre-installed oil baffles and
fit LS1, LS2, LS3, LS6, are built with emission port. Holley script logo. Satin
and LS7 engines, these black.
valve covers are ready
to install, with on OE- Muscle Series Valve Covers
style baffle, lengthened
factory-style mounting Small Block Chevrolet 1958-86
hardware, and a billet aluminum oil HLY241-134
fill cap. Requires use of remote coil relocation brackets Die-cast finned aluminum stock
(not included). Available in multiple finish options. height valve covers with
Part No. Description internal baffles and twist-in
w/ Bowtie/Chevrolet Logo oil fill cap. Natural finish.
HLY241-401 Polished Sold in pairs.
HLY241-402 Satin Black Machined
HLY241-403 Factory Orange
HLY241-404 Gloss Red GM Muscle Series Center
w/ LSX Logo Bolt Valve Covers
HLY241-405 Natural Machine Finish These die-cast aluminum
HLY241-407 Satin Black Machined
center-bolt valve covers
HLY241-408 Factory Orange
HLY241-409 Gloss Red
for small block Chevy
applications (Vortec,
ZZ4, ZZ5, and ZZ6) resist
LS Valve Covers warping and leaks. The
HLY241-90 clean, modern styling with
Cast aluminum, a high-definition Chevrolet
polished valve and Bowtie logos is accented by
covers include a polished mounting hardware. With
radiused shape and plenty of internal height for exceptional valve
angled coil mounting train clearance, they include pre-installed internal
location for a clean, baffling, polished mounting hardware, and oil fill/PCV
professional appearance. Coils grommets.
mount directly to the valve covers, Part No. Description
eliminating the need for brackets. Sold per HLY241-292 Black
pair, complete with billet oil fill cap. HLY241-293 Orange

2023 - 2024 HOT ROD AND EARLY MUSCLE 249

GM Licensed Track Series LS Valley Cover with Oil Fill
Valve Covers Made of billet aluminum,
Constructed of TIG- each valley cover is custom
welded 6061T5 machined for either LS1/
sheet aluminum, LS6 (10-bolt) or LS2/
and featuring LS3/LS7/LSX (11-bolt)
a laser-etched applications. Modern,
Chevrolet and race-inspired design is
trussed for increased HLY241-362
Bowtie logo, the GM
Track Series of valve strength, and features an
HLY241-286
covers provides a integrated oil fill neck with billet
high-end, fabricated look for Chevy engines. oil fill cap. Smooth underside allows
Lightweight and tough, these valve covers are available in for elimination of displacement on demand and provides
several finishes, mounting configurations, and clearance ample gasket sealing surface. Gaskets and upgraded
heights. Mounting hardware included. mounting hardware sold separately.
Part No. Description Part No. Description
Small Block GM LS2/LS3/LS7/LSX
HLY241-285 Silver, 1987-97 Chevy 305-350 No Hole HLY241-362 Black
HLY241-287 Silver, 1958-86 Chevy 283-400 No Hole GM LS1/LS6
HLY241-284 Black, 1958-86 Chevy 283-400 HLY241-367 Natural Finish
HLY241-286 Black, 1987-97 Chevy 305-35 No Hole HLY241-368 Polished
HLY241-288 Black, 1958-86 Chevy 283-400
Big Block GM LS Retro-Fit
HLY241-280
HLY241-278
Silver, 1965-00 Chevy 396-454 Smooth Top w/Hole
Silver, 1965-2000 Chevy 396-454
Engine Oil Pan
HLY241-281 Black, 1965-2000 Chevy 396-454 HLY302-1
HLY241-279 Black, 1965-2000 Chevy 396-454 Engineered specifically
LS for installing modern
HLY241-294 Satin Black Finish LS Valve Covers w/OEM Coil Stands
LS engines into popular
1955-87 GM passenger
cars/pickups, cast
Sniper Fabricated aluminum, machined
Aluminum Valve Cover oil pan offers complete OEM fitment. Pan includes a 6-qt.
Constructed of TIG-welded capacity (with oil filter) and is sold complete with oil pump
6061T5 sheet aluminum pick-up and all required hardware.
and featuring a laser-
etched Sniper logo, HP In-Line Billet Electric Fuel Pump
these valve covers
provide a high-end, HLY12-890
fabricated look for Versatile pumps deliver sufficient fuel
a variety of popular to a wide variety of high-powered
engines. Lightweight and carbureted or fuel injected
tough. Mounting hardware vehicles. Lightweight,
included. HLY890002B quiet, and durable, billet
aluminum-bodied pumps
Part No. Description
Small Block Part No. Description are offered in two versions.
Chevy Big Block HP in-line high-flow fuel
HLY890008 Silver, Tall w/Baffles Chevy pump supports up to 900 EFI HP or 1,050
HLY890009B Black, Tall 1987-97 HLY890002 Silver, Tall w/o Baffles carbureted HP.
HLY890010 Silver, Tall HLY890002B Black, Tall w/o Baffles
HLY890004 Silver, Tall w/Baffles
HLY890010B Black, Tall
HLY890004B Black, Tall w/Baffles
Billet Electric Fuel Pumps
Ford
HLY890011 Silver, Tall, Plain Top Ford Reliable gerotor-style pumps use black,
HLY890011B Black, Tall, Plain Top HLY890001 Silver, BBF FE Tall hard anodized billet bases and chrome
HLY890012 Silver, Tall HLY890001B Black, BBF FE Tall plated 12V motors. Offered in 125 GPH and
HLY890012B Black, Tall HLY890007 Silver, 429/460 Tall 150 GPH versions, pumps include 3/8"NPT
Silver, Tall, One Side HLY890007B Black, 429/460 Tall inlet and outlet ports.
HLY890013 Mopar
Tapered Edge Part No Description
Black, Tall, One Side HLY890005 Silver, Short
HLY890013B 125 GPH Billet Base HP Electric Fuel Pump,
Tapered Edge HLY890005B Black, Short HLY12-125
Up to 750 HP, Internally Regulated to 7 PSI
Mopar HLY890006 Silver, Tall 150 GPH Billet Base HP Electric Fuel Pump,
HLY890003 Silver, Tall 1964-91 HLY890006B Black, Tall HLY12-150*
Up to 900 HP, Includes HLY12-803 Regulator
HLY890003B Black, Tall 1964-91 LS
* Use HLY12-843 Regulator for applications with over 750 horsepower.
HLY890014 Silver, Tall
HLY890014B Black, Tall

250 2023 - 2024 HOT ROD AND EARLY MUSCLE

170 GPH Billet HP Billet Fuel Filters
Mechanical Fuel Pumps Designed as an integral part of the HP fuel system line,
Reliable gerotor-style billet aluminum fuel filters feature black anodized bodies
mechanical fuel pumps deliver and clear anodized end caps. Filters are offered in 100
170 GPH of free flow and include GPH and 175 GPH versions with choice of 10-, 40-, or
a pre-set fuel pressure of 7-1/2 100-micron elements.
PSI. Fuel pressure regulator not required. Description 10 Micron 40 Micron 100 Micron
Part No. Part No. Part No.
Part No Description 100 GPH Billet HP, 3/8"NPT HLY162-550 HLY162-562 HLY162-551
HLY12-327-25 Small Block Chevy 175 GPH Billet HP, 3/8"NPT HLY162-552 HLY162-563 HLY162-553
HLY12-454-25 Big Block Chevy 175 GPH Billet HP, -8AN HLY162-554 HLY162-555 HLY162-564
Notes: 10-micron filters are recommended for use as a post filter in EFI applications.
Billet Fuel Pressure 40-micron filters are recommended for use as a post filter in carbureted systems. 100-micron
filters are recommended as a pre filter in carbureted or EFI systems.
Regulators
Precision CNC-machined regulators
are manufactured from rigid billet GM LS Mid-Mount Complete
aluminum and are engineered to Accessory Drive System
deliver reliable, consistent fuel
pressure. All regulators include an
HLY20-185
3/8"NPT inlet/outlet ports (unless specified) Complete all-in-one accessory
and an 1/8"NPT gauge port. drive system pulls accessories
in tighter, providing a cleaner
Part No Description underhood appearance. Patent-
HLY12-840 Fuel Pressure Regulator, Carbureted 4.5-9 PSI
HLY12-841 Fuel Pressure Regulator, Carbureted Bypass 4.5-9 PSI
pending, “bracketless” integrated design secures all
Fuel Pressure Regulator, Carbureted Bypass with Idle Bleed,
accessories to the water pump. Swap-friendly system
HLY12-842 shares alternator and water pump designs with the
4.5-9 PSI
HLY12-843* Fuel Pressure Regulator, Carbureted 4.5-9 PSI C7 Corvette. Includes water pump, A/C compressor,
*Regulator includes (1) -10AN inlet port and (2) -8AN outlet ports alternator, P/S pump with reservoir, crank damper,
pulleys, belt, and necessary hardware.
Mid-Mount Complete Accessory Systems
Designed for easy installation, Dash Bezels for Holley EFI 6.86" Dashes
these accessory systems are a Bezels provide an attractive
great way to dress up an engine way to integrate Holley EFI
and boost performance. They dashes. Made from durable
include everything needed for 5/32" thick UV-resistant
installation: brackets, water ABS composite, these bezels feature a matte black finish
pump, a compact Sanden SD7 that will accent any vehicle interior.
A/C compressor, 150-amp Part No. Description
alternator, power steering HLY553-400 Dash Bezel for 1966-67 Nova
pump with reservoir, 6-rib HLY553-401 Dash Bezel for 1978-81 Malibu/Monte Carlo
serpentine belt and pulleys, HLY553-402 Dash Bezel for 1982-88 Malibu/Monte Carlo
damper, brackets, adapters, and hardware. HLY553-404 Dash Bezel for 1967-72 Ford Ranger Truck
HLY553-405 Dash Bezel for 1970-81 Firebird
Part No. Description HLY553-406 Dash Bezel for 1987-93 Ford Mustang
HLY20-180BK LS Mid-Mount Accessory System,with SFI-Certified Damper
HLY20-185BK LS Mid-Mount Accessory System, with Cast-Iron Damper
LS Race-Ready Mid-Mount Accessory System, with Cast- In-Tank Fuel Pump Modules
HLY20-186BK
Iron Damper Holley EFI fuel tank modules
HLY20-240BK SBC Mid-Mount Accessory System include a high-performance 255
HLY20-242BK BBC Mid-Mount Accessory System lph in-tank electric fuel pump with
pre-calibrated fuel level sender,
LS Two-Piece Valve Covers and all the parts needed for
Cast aluminum valve covers installation.
feature a radiused 2-piece Part No. Description
design to hide the coils. Base HLY12-300 1967-69 GM F-Body
fits LS1, LS2, LS3, LS6, and HLY12-301 1970-73 GM F-Body
LS7 engines with clearance HLY12-302 1964-67 GM A-Body
for .750” lift cam with stock HLY12-304 1974-81 GM F-Body
HLY12-305 19641/2-70 Ford Mustang
style rocker arms, while the
HLY12-306 1978-88 GM G-Body
base features an internally
HLY12-308 1973-87 GM Full-Size Truck w/1/4" NPT Inlet
baffled ventilation system. Available in multiple finishes. HLY12-309 1955-57 Chevrolet
Sold in pairs. Low-profile oil fill cap included. HLY12-310 1963-67 Corvette
Part No. Description HLY12-311 1968-74 Corvette
HLY241-172 Satin Black with Machined Finned Tops and Holley Logo HLY12-312 1975-77 Corvette
HLY241-177 Satin Black with Chevrolet Script Logo HLY12-314 1968-70 Mopar B-Body
HLY241-179 Gloss Red with Chevrolet Script Logo HLY12-317 1961-64 Chevy Bel Air/Biscayne/Impala
HLY241-182 Satin black with Machined Finned Tops HLY12-319 1963-76 Mopar A-Body

2023 - 2024 HOT ROD AND EARLY MUSCLE 251

GM A/G Body LS Swap Hooker Exhaust Manifolds
These cast-iron exhaust
Engine Mount Brackets manifolds feature a
HKR12643 2.5” outlet for improved
These mounts provide an engineered 3 to 3-1/2 degree exhaust flow. Designed
engine/transmission inclination angle that is critical to to hug close to the engine
obtaining correct U-joint angle. The installation requires block for use in a variety
new stock OE clamshell engine mounts. Applications of replacement or engine
include 1978-88 A/G-body vehicles with small block. swap applications, they
are intended for GM LS
engine installations where durability, quiet operation,
1978-88 GM A/G Body LS Swap and leak-free sealing is desired. Available in black or
Transmission Crossmember silver ceramic finish, they include nickel-plated steel
HKR12644 mating flanges, MLS mating flange gaskets, and mating
The CAD designed high-strength low-alloy flange hardware.
crossmember Part No. Description
allows for the HKR8502-1 Silver Ceramic Finish
HKR8502-3 Black Ceramic Finish
installation of
a 4L60/4L80/
TH400/2004R/T56/T56 Magnum Exhaust Manifold
transmission. Additional bracket Intended for all GM LS (except
may be required. LS7 and LS9) engine swap
Part No. Description
applications where
Additional Components durability, quiet
HKR12655 Crossmember Add-On Bracket for 4L60 Transmission operation, emissions
complianc,e and
Blackheart Super Long Tube Headers leak-free sealing is
These headers make it easier desired. 304 stainless steel mating flanges
than ever to install an LS- are included. 2-1/4" outlet diameter.
based engine into classic Part No. Description
muscle cars including the HKR8501-4 Titanium Ceramic Finish
HKR8501-3 Black Ceramic Finish
1967-69 Camaro/Firebird,
HKR8501-5 Cast Iron Gray Ceramic Finish
1968-72 GM A-body, 1968-
74 GM X-body, and 1982-92
Camaro/Firebird. With 1-7/8” 3-Bolt Flanged Reducers
primaries and 3” collectors, Just pick the reducer size that matches the diameter of
these long tube headers the header collector. Bolt it
include gaskets and mounting hardware. to the collector ring, and weld
on the tailpipe. On headers
Part No. Description
HKR70101508HKR Gen 1 F And X Body Black Ceramic
without collector ring, use
HKR70101508-1HKR Gen 1 F And X Body Metallic Ceramic Ceramic Coated Hooker slip-on reducers.
HKR70101518-1 1968-72 GM A-Body Ceramic Coated They’re swaged to slip over
the collector and weld to the
exhaust pipe.
Part No. Description
HKR11025 2-1/2" Collector to 2" Tailpipe, Pair
HKR11026 2-1/2" Collector to 2-1/2" Tailpipe, Each
HKR11030 3" Collector to 2-1/8" Tailpipe, Pair
HKR11032 3" Collector to 3" Tailpipe, Pair
HKR11040 3" Collector to 2-1/2" Tailpipe, Each
HKR11035 3-1/2" Collector to 2-1/2" Tailpipe, Each
HKR11036 3-1/2" Collector to 3" Tailpipe, Each

Collector Ring Kits

For use when building headers
and exhaust systems. Kits
include two 3-bolt rings,
gaskets, and six bolts.
Part No. Description
HKR11425 2-1/2" Collector Rings
HKR11430 3" Collector Rings
HKR11435 3-1/2" Collector Rings

252 2023 - 2024 HOT ROD AND EARLY MUSCLE

Competition Headers
Hooker Competition headers are made from durable 16-gauge steel tubing and are finished with a
heat-cured, heat-resistant black paint, optional metallic ceramic thermal barrier coating or the new
"Darksides" black ceramic coating. Complete with gaskets, bolts, and collector gaskets.
"Darksides" Transmission
Metallic Black
Ceramic Ceramic Auto Auto Tube Size Coll. Size
Years Engine Part No. Coating Coating Footnotes P/S P/B A/C Col. Flr. Std. Col. Std. Flr. O.D. In O.D. In
Chevrolet Passenger (Full Size)
1965-70 265-400 HKR2451 HKR2451-1 HKR2451-3 127 Y Y 9 Y Y Y Y 1-5/8" X 30" 3"
1971-89 265-400 HKR2451 HKR2451-1 HKR2451-3 117, 127 Y Y 9 N N Y Y 1-5/8" X 30" 3"
1965-70 396-502 HKR2457 HKR2457-1 — — Y Y Y Y Y Y Y 2" X 27" 3-1/2"
1971-74 396-502 HKR2455 HKR2455-1 — 90 Y Y Y N N Y N 2" X 30" 3-1/2"
Chevrolet Chevelle, El Camino
1964-87 265-400 HKR2451 HKR2451-1 HKR2451-3 117, 127 Y Y 9 Y Y Y Y 1-5/8" X 30" 3"
1964-74 396-502 HKR2455 HKR2455-1 — — Y Y Y Y Y Y Y 2" X 30" 3-1/2"
Chevrolet Monte Carlo
1970-87 265-400 HKR2451 HKR2451-1 HKR2451-3 117, 127 Y Y 9 N N Y Y 1-5/8" X 30" 3"
1970-74 396-502 HKR2455 HKR2455-1 — — Y Y Y N N Y Y 2" X 30" 3-1/2"
Chevrolet Chevy II, Nova
1968-79 265-400 HKR2451 HKR2451-1 HKR2451-3 127 Y Y 9 Y Y Y Y 1-5/8" X 30" 3"
1968-74 396-502 HKR2457 HKR2457-1 — — Y Y Y Y Y Y Y 2" X 30" 3-1/2"
Chevrolet Camaro
1967-69 265-400 HKR2451 HKR2451-1 HKR2451-3 127 Y Y 9 N Y Y Y 1-5/8" X 30" 3"
1967-69 396-502 HKR2457 HKR2457-1 — — Y Y Y N Y Y Y 2" X 27" 3-1/2"
1970-81 265-400 HKR2451 HKR2451-1 HKR2451-3 117, 127 Y Y 9 N Y Y Y 1-5/8" X 30" 3"
1970-72 396-502 HKR2455 HKR2455-1 — — Y Y Y N Y N Y 2" X 30" 3-1/2"
1982-92 265-400 HKR2460 HKR2460-1 — 62, 92 Y Y Y N Y N Y 1-5/8" 3"
Chevrolet Corvette
1955-82 265-400 HKR2456 HKR2456-1 — 22, 127 Y Y 9 N Y N Y 1-5/8" X 24" 3"
1/2, 3/4, 1 Ton Truck (2WD)
1963-72 265-400 HKR2452 HKR2452-1 — 117, 127 Y Y Y Y Y Y N 1-5/8" X 27" 2-1/2"
1973-87 265-400 HKR2452 HKR2452-1 — 117, 127 Y Y Y Y Y Y N 1-5/8" X 27" 2-1/2"
1/2, 3/4, 1 Ton Truck (4WD)
1967-72 265-400 HKR2453 HKR2453-1 — 127 Y Y 9 N Y Y N 1-5/8" X 27" 2-1/2"
1973-87 265-400 HKR2452 HKR2452-1 — 117, 127 Y Y 9 N Y Y N 1-5/8" X 27" 2-1/2"
Dodge/Plymouth Passenger (B And E Bodies)
1967-74 383-440 HKR5903 HKR5903-1 — 10, 200 Y Y Y Y Y Y Y 1-7/8" X 36" 3"
Dodge Challenger/Plymouth Barracuda
1970-74 383-440 HKR5903 HKR5903-1 — 10, 200 Y Y Y Y Y Y Y 1-7/8" X 36" 3"
Dodge/Plymouth All B And E (A And F Bodies)
1967-82 273-360 HKR5901 — — 10, 201 Y Y Y N Y Y Y 1-5/8" X 34" 3"
Ford/Mercury Cyclone, Falcon, Fairlane, Montego, Torino, Ranchero
1966-73 255-302W HKR6901 HKR6901-1 — 44, 68 83 Y Y N Y Y Y 1-5/8" X 28" 3"
Ford Mustang/Mercury Cougar
1967-73 351W HKR6901 HKR6901-1 — 44, 68 83 Y Y N N N Y 1-5/8" X 28" 3"
Oldsmobile 442, Cutlass
1968-77 350-403 HKR3901 — — 214 Y Y Y N Y Y Y 1-5/8" X 29" 2-1/2"
1978-87 265-400CH HKR2451 HKR2451-1 HKR2451-3 117, 127 Y Y Y N N Y Y 1-5/8" X 30" 3"
Pontiac Firebird, Trans Am
1970-79 350-455 HKR4901 HKR4901-1 — 126 Y Y Y N Y N Y 1-5/8" X 28" 3"
1978-81 265-400CH HKR2451 HKR2451-1 HKR2451-3 117, 127 Y Y 9 N Y Y Y 1-5/8" X 30" 3"
1982-92 265-400CH HKR2460 HKR2460-1 — 62, 92 Y Y Y N Y N Y 1-5/8" X 15" 3"
Pontiac GTO, LeMans, Grand Am
1964-75 326-455 HKR4901 HKR4901-1 — — Y Y Y N Y Y Y 1-5/8" X 28" 3"
Footnotes
9 Installation requires A/C bracket HKR10925 left side or HKR10926 right side. On 1979 and up, use stock bracket.
10 Will not fit engines equipped with air injection pump without modification.
22 Header dual system will not fit Turbo 400 applications.
44 Will not fit with C-6 automatic transmissions.
62 Will fit with angle plug heads.
68 Will not fit Dart/Windsor head.
83 Installation requires power steering bracket HKR10961
90 See Hooker catalog for info on Hooker exhaust systems.
92 This header is equipped with a fitting to accept the stock oxygen sensor.
Reducers available with oxygen sensor on 1980 and up models.
117
2-1/2" bolt-on HKR11035HKR, 3" bolt-on HKR11032HKR.
126 Some factory heads do not have bolt hole in end. Holes must be drilled and tapped to assure proper seal.
Hooker headers for Chrysler 383-440 engines will bolt on the popular aftermarket B-S heads.
However, because the exhaust port centerline on these heads is 5/8" higher and 3/8" out from the engine centerline compared to stock heads,
200
some header modifications will be required for installation. Custom header applications will be required to fit the B-1 heads because of angled
spark plug location.

2023 - 2024 HOT ROD AND EARLY MUSCLE 253

Electric Dual Exhaust Polyurethane
Cut-Out Kits Transmission Mounts
Hooker electric exhaust Durable polyurethane
cut-outs create an transmission mount is
instant performance designed to handle high-
boost when opened! horsepower applications on the street or strip. Can be
Stainless steel tubing used on various 1- or 2- bolt GM and Jeep applications.
and 6061-T6 aluminum Grade 8 hardware included.
motor and valve bracket provide great looks and weather Part No. Description
resistance. Remote controlled operation and a Y-cable Polyurethane Transmission Mount for 1958-2004 GM
HKR71223029HKR
make installation and operation easy. Vehicles and 1980-95 Jeep CJ/YJ/Wagoneer—Black
Polyurethane Transmission Mount for 1958-2004 GM
Part No. Description HKR71223030HKR
Vehicles and 1980-95 Jeep CJ/YJ/Wagoneer—Red
HKR11051 Dual Cut-Out Kit, 2-1/2"
HKR11052 Dual Cut-Out Kit, 3"
Transmission Crossmembers and Adapters
Engine Mounting Brackets Designed to facilitate
Zinc-plated steel brackets the installation of the
ensure the proper engine/ transmission into vehicles
transmission angles and with swapped engines.
clearances and are optimized When used with other
for use with Holley and Hooker Hooker Blackheart swap
BlackHeart components. components, they help
Zinc-plated steel. Mounting ensure proper angle and alignment, and provide
hardware included. necessary clearances. Black powder-coated steel.
Part No. Description Part No. Description
Engine Mount, LS Engine into 1975-81 Transmission Crossmembers
HKR12613 For 1970-81 GM F-Body, LS with 4L60 (multi-piece
GM F-Body HKR12614
Engine Mount, LS Engine into 1975-87 case only, 4L65, 4L70, 4L75
HKR12621 For 1970-81 GM F-Body, LS with 4L80E, 4L85E,
GM Full-Size Trucks/SUVs HKR12616
Engine Mount, LS Engine into 1982-92 TH400, 2004R
HKR71221003 For 1967-69 GM F-Body / 1968-74 GM X-Body, LS with
GM F-Body HKR12626
Engine Mount, LS Engine into 1968-72 T56/T56 Magnum
HKR71221006HKR For 1978-88 GM A-Body/ G-Body, LS with 4L60E,
GM A-Body, Forward Position HKR12644HKR-1
Engine Mount, LS Engine into 1968-72 4L65, 4L70, 4L80, TH400, T56, T56
HKR71221007HKR HKR71222005 For 1984-92 GM F-Body, LT1/LT4 with T56
GM A-Body, Stock Position
Engine Mount, LS Engine into 1964-67 For 1964-67 GM A-Body, LS with T56, TH4L80,
HKR71221008 HKR71222008
GM A-Body, Forward Position TH4L85
Engine Mount, LS Engine into 1964-67 HKR71222024HKR-1 For 1967-72 GM Full-Size Truck, LS with 4L80, TH400
HKR71221009 For 1967-72 GM Full-Size Truck, LS with 4L60E, 6L80,
GM A-Body, Rearward Position HKR71222024HKR-2
Engine Mount, Coyote into 1984-95 Mustang with 700R4
HKR71221025HKR For 1999-04 Ford Mustang, Ford Coyote/GM LS with
Stock K-Member HKRBHS507
Engine Mount, LS Engine into 1982-2004 GM S-10/ 4L60E, 4L70E, Powerglide, TKO, TH350
HKR71221029HKR For 1972-93 Dodge Full-Size Truck/SUV 2WD, Gen III
Sonoma Truck
Engine Mount, Gen III Hemi into 1966-72 Mopar HKRBHS525 Hemi with 8HP70, 8HP90, 9HP75, NAG1, TR6060, TKX
HKRBHS531 (Ford), 545RFE/46, or A727
B-Body with V8 K-Member
Engine Mount, 1973-87 GM C10/C15/C20 Series 2WD For 1966-70 Mopar B-Body, Gen III Hemi with A727,
HKRBHS540 HKRBHS532
Trucks/SUVs, GM LS or Gen-V LT NAG1 , or 8HP70
Crossmember Adapter Brackets

Heavy-Duty LS Clamshell- HKR71223003 Crossmember Adapter Bracket for 4L60, 4L70

Style Engine Mounts HKR71223018HKR
Crossmember Adapter for 1979-93 Ford Mustang,
A direct-fit replacement for GM Gen Coyote with 4R79W, 4R75E, T45
4 F-Body cars, these engine mounts Crossmember Adapter for 1979-93 Ford Mustang,
HKR71223019HKR
Coyote with 6880, MT82
ensure proper drivetrain geometry. Crossmember Adapter for 1979-93 Ford Mustang,
Two-piece bolt-together design HKR71223025HKR
Coyote with TKO 500/600
works with Hooker Blackheart Crossmember Adapter for 1972-93 Dodge D100/D150
polyurethane inserts. Black powder- HKRBHS527 2WD Truck, or 1987-04 Dodge Dakota 2WD Truck, Gen
coated 11-gauge steel. Sold each - III Hemi with NAG1 6-Speed Automatic
two required per vehicle. Crossmember Adapter for 1972-93 Dodge D100/D150
HKRBHS528 2WD Truck, or 1987-04 Dodge Dakota 2WD Truck, Gen
Part No. Description III Hemi with TR6060 6-Speed Manual
Polyurethane Engine Mount Inserts for Use with Clamshell Engine Crossmember Adapter for 1972-93 Dodge D100/D150
HKR71221016 For GM LS/LT and Gen III Hemi Swap Kits, Black, Each 2WD Truck, or 1987-04 Dodge Dakota 2WD Truck, Gen
HKR71221017 For GM LS/LT and Gen III Hemi Swap Kits, Red, Each HKRBHS529
III Hemi with 545RFE 5-Speed Automatic, 46RH or
46RE 4-Speed Automatic
Crossmember Adapter for 1972-93 Dodge D100/D150
HKRBHS530 2WD Truck or 1987-04 Dodge Dakota 2WD Truck, Gen
III Hemi with A727 3-Speed Automatic
Crossmember Adapter for 1966-70 Mopar B-Body,
HKRBHS536
Gen III Hemi with 8HP70

254 2023 - 2024 HOT ROD AND EARLY MUSCLE

Steering Shaft for LS-Swapped Stainless Steel
S10/Sonoma Exhaust Headers
Required for the installation of Hooker LS-Swap Hooker Blackheart long-tube
headers, these bolt-on steering shafts eliminate the headers are designed for LS and
stock rag joint. May also be used as a direct factory Gen III Hemi swaps. Natural finish
replacement. E-coated steel. stainless steel construction.
Part No. Description Hardware included.
Steering Shaft for 1994-2004 NOTE: Some applications may require use of Hooker Premium engine mounting brackets, sold
HKR71223021
GM S-10/Sonoma separately.
Steering Shaft for 1982-93 GM S-10/S15/
HKR71223022 Part No. Description
Sonoma and 1982-88 GM G-Body
LS Swap Headers, 1-7/8" Tubes, 3" Collector, for
HKRBH13239
1975-87 GM C-10/C20 2WD Trucks
LS Swap Headers, 1-7/8" Tubes, 3" Collector, for
HKRBH13243 1968-72 Narrow Frame GM C-10/C20 2WD Trucks and
all 1973-74 GM C-10/C20 2WD Trucks
Exhaust Manifold Set HKRBH13253
LS Swap Headers, 1-3/4" Tubes, 3" Collector, for
Cast iron exhaust manifolds feature 1975-87 GM C-10/C20 2WD Trucks
a 2-1/2" outlet and are offered with LS Swap Headers, 1-3/4" Tubes, 3" Collector, for
multiple finishes and fitment options. HKRBH13285 1968-72 Narrow Frame GM C-10/C20 2WD Trucks and
Sold in pairs. Gaskets and hardware all 1973-74 GM C-10/C20 2WD Trucks
included. HKRBH2358
Gen III Hemi Swap Headers, 1-7/8" Tubes, 3" Collector,
for 1966-72 Mopar B-Body
Part No. Description
HKR8502 LS, Natural Finish
HKR8525-1HKR SBC, Rectangular Port, Silver Ceramic Coating Driveshaft Loop for Gen III Hemi Swaps
HKR8525-3HKR SBC, Rectangular Port, Black Ceramic Coating
HKR8527-1HKR SBC, Raised D-Port, Silver Ceramic Coating
HKRBHS539
HKR8527-3HKR SBC, Raised D-Port, Black Ceramic Coating Bolt-on driveshaft loop is designed
for Gen III Hemi swaps into 1966-70
Mopar B-Body cars. Black powder-
coated steel. Hardware included.

Pro-Street DOT Radial Tires

Pro-Street radials deliver the comfort and ride stability highway travel demands. Exclusive
“Pro-Street" tread pattern distributes water away for better wet traction and stability. For the
ultimate in style and performance, count on the Hoosier Pro-Street radial.
Part No. Tire Size Rim Width Diameter Section Width Tread Width
Front
HOO19050 26 x 7.50 R-15 LT 5"-6" 25.875" 7.25" 5.25"
Rear
HOO19200 29 x 15.50 R-15 LT 10"-12" 29.5" 14.75" 12.125"
HOO19275 31 x 12.50R-15 LT 8.5"-11" 31" 13.4" 10.3"
HOO19300 31 x 16.50 R-15 LT 10"-12" 31" 15.625" 12.75" Plus UPS
HOO19350 31 x 18.50 R-15 LT 12"-14" 31" 17.5" 14.125" Freight Charges

Quick Time DOT Tires

Hoosier Quick Time tires are designed for drag or pro-street competition where a street- legal
DOT tire is required. The Quick Time's full, standard tread and soft compound offer maximum
traction.
Part No. Tire Size Rim Width Diameter Circumference Section Width Tread Width
Rear
HOO17110 275/60D-15 8"-10" 27" 85" 11" 9"
HOO17125 295/60D-15 8"-10" 29" 92" 12" 10"
HOO17140 31 x 16.50-15 LT 12"-14" 30.9" 97" 17" 13"
HOO17150 31 x 18.50-15 LT 14"-15" 30.9" 97" 18.6" 15"

Plus UPS
Freight Charges

2023 - 2024 HOT ROD AND EARLY MUSCLE 255

Quick Time Pro DOT Tires
Engineered for heads-up, street-legal classes where a DOT-legal tire is mandatory. A true soft
compound drag tire, ideal for NMCA competition. Not intended for daily street operation.
Part No. Tire Size Rim Width Diameter Circumference Section Width Tread Width
HOO17421 26 x 11.50-15 LT 8"-10" 26.4" 83" 10.8" 10"
HOO17500 27/10.5-15 LT 8-10" 27" 85" 10.6" 9"
HOO17510 27/11.5-15LT 8-10" 27" 85" 11.2" 10"
HOO17601 28/11.5-15 LT 8-10" 28" 88" 11.2" 10"
HOO17606 28 x 13.50-15 LT 10-12" 28" 88" 12.7" 11"
HOO17611 28/14.5-15 LT 10-12" 28" 88" 13.1" 12"
HOO17700 29/11.5-15 LT 8-10" 29.3" 92" 11.9" 10"
HOO17710 29/14.5-15 LT 10-12" 29.3" 92" 13.6" 12" Plus UPS
HOO17800 31/16.5-15 LT 12-14" 30.9" 97" 16" 13" Freight Charges
HOO17810 31/18.5-15 LT 14-15" 30.9" 97" 18.2" 15"
HOO17910 33/22.5-15 LT 15-16" 33" 104" 19.8" 17"

DOT Drag Radials

DOT Drag Radials are designed to provide more traction than conventional bias ply “street" type
tires.
Rim
Part No. Tire Size Diameter Circumference Section Width Tread Width
Width
HOO17335DR2 P335/35R-17 11-13" 25.6" 80.4" 13.6" 12.4"
Notes: DOT Labeled Hoosier Racing Tires meet Department of Transportation requirements for marking and performance only and are NOT INTENDED FOR HIGHWAY
USE. It is unsafe to operate any Hoosier Racing Tire including DOT tires on public roads. The use of Hoosier Racing Tires on public roadways may result in loss of
traction, unexpected loss of vehicle control, or sudden loss of tire pressure, resulting in a vehicle crash and possible injury or death.
Plus UPS
Freight Charges

1968-72 GM A-Body
TVS suspension products for
Chevelle, El Camino, Olds Cutlass,
Buick Skylark, Pontiac GTO, etc.
HOT1302 is recommended when
using HOT2202.
1964-67 GM A-Body Part No.
HOT1102
Description
Tubular Upper A-Arms, Stock Spindle
TVS suspension products HOT1104 Tubular Lower A-Arms, Stock Spindle
for Chevelle, El Camino, HOT1202AA Double Adjustable Upper Trailing Arms
Olds Cutlass, Buick HOT1302 Lower Trailing Arms
Skylark, Pontiac GTO, etc. HOT1402 Trailing Arm Mount Braces
Part No. Description HOT1601 Tie Rod Sleeves, 1968-70
HOT1102 Tubular Upper A-Arms, Stock Spindle HOT1612 Tie Rod Sleeves, 1971-72
HOT1104 Tubular Lower A-Arms, Stock Spindle HOT1702 Trailing Arm Hardware, for HOT1302
HOT1302 Lower Trailing Arms HOT1803A* Adjustable Rear Suspension Package
HOT1601 Tie Rod Sleeves HOT1901 Spring Set, Front and Rear 1968-72 Small Block
HOT1901F Front Springs, 1" Drop, SBC HOT1901F Front Springs (1" Lower), Small Block
HOT1916F Front Springs, 1" Drop BBC HOT1901R Rear Springs (1" Lower)
HOT2202F Sway Bar, Front HOT1916F Front Springs, 1" Drop BBC
HOT79020002 1.5 Street Performance Shocks, Set Front and Rear HOT2282 Sway Bar Set, Front and Rear
HOT2282 Sway Bar Rear
HOT2202F Sway Bar, Front
1967-69 GM F-Body HOT79020002 1.5 Street Performance Shocks, Set Front and Rear
TVS suspension products for Camaro and Firebird. * Includes upper trailing arms, lower trailing arms, trailing arm mount braces and hardware kit.
Part No. Description
HOT80015 TVS Complete Suspension Kit, Small Block
1970-81 GM F-Body
HOT1107 Tubular Upper A-Arms TVS suspension products for Camaro and Firebird.
HOT1109 Tubular Lower A-Arms Part No. Description
HOT1404 Convertible “X" Brace, 20" x 20"x 4" HOT1106 Tubular Upper A-Arm
HOT1906F Sport Coil Springs, Big Block, Front Only (2" Lower) HOT1908F Sport Coil Springs, Small Block, Front Only (2" Lower)
HOT1907F Sport Coil Springs, Small Block, Front Only (2" Lower) HOT1909F Sport Coil Springs, Big Block, Front Only, (2" Lower)
HOT2207C Sport Sway Bar, Front 1-1/8" and Rear 7/8" Set, Hollow Sport Sway Bar Set, 1-3/8" Hollow Front,
HOT2207F. Sport Sway Bar, Front Only, 1-1/8" Hollow HOT2236
7/8" Hollow Rear
HOT2207RC Sport Sway Bar, Rear Only, 7/8" Hollow HOT2236F Front Sway Bar
HOT2407C Sport Leaf Springs (1-1/2" Lower) HOT2408C Sport Leaf Springs (1-1/2" Lower)
HOT2413C Sport Leaf Springs (3" Lower) HOT2409C Sport Leaf Springs 1974-81 Firebird 1-1/2" Lower
HOT4007 Coupe Sub-Frame Connectors HOT4013 Sub Frame Connectors for 1974-81
HOT4008 Convertible Sub-Frame Connectors
HOT79020004 1.5 Street Performance Shocks, Set Front and Rear

256 2023 - 2024 HOT ROD AND EARLY MUSCLE

1978-88 GM A/G Body 1982-92 GM F-Body
TVS suspension products TVS suspension products for
for Malibu, El Camino, Monte Camaro and Firebird. HOT1601
Carlo, Cutlass, Regal, etc. Part No. Description
HOT1301 is recommended HOT1301 Lower Trailing Arms
when using HOT2201. HOT1601 Tie Rod Sleeves
Part No. Description
HOT1301 Lower Trailing Arms 1955-57 Chevy Sport Sway Bars
HOT1601 Tie Rod Sleeves
HOT1901R Rear Springs, 1" Drop HOT22105
Durable 1-3/8" front
and 15/16" rear tubular
sway bars are 60%
stiffer than stock
bars with end links. Features TIG-welded construction
1967-72 GM C-10 and urethane bushings with grade 8 bolts. Bars offer
more stability for improved traction and less body roll.
Pickup Mounting hardware includes stainless steel U-bolts and
Part No. Description laser-cut axle mounts. Easily installed.
HOT22108F Front Sway Bar

1968-74 GM X-Body 19641/2-66 Ford Mustang

TVS suspension TVS suspension products for Ford
products for Mustang.
Nova, Ventura,
Omega, Part No. Description
HOT2207F HOT14414 Strut Rod Kit
and Apollo.
HOT1614 Adjustable Tie Rod Sleeves
Part No. Description HOT1930F Coupe Fastback/Conv Small Block Front Springs
HOT4009 Sub Frame Connectors HOT22114F Front Sway Bar Set
HOT1906F Sport Coil Springs, Big Block, Front Only (2" Lower) HOT22114R Rear Sway Bar Set
HOT1907F Sport Coil Springs, Small Block, Front Only (2" Lower) HOT2430 Coupe Fastback and Conv Sport Leaf Springs
HOT2207F Sport Sway Bar, Front Only, 1-1/8"
HOT4017 Sub Frame Connectors
HOT2260 Front (1-1/8") / Rear (7/8") Sport Sway Bar Kit
HOT71020016 Tuned 1.5 Street Performance Series Rear Shocks
HOT2407C Sport Leaf Springs (1-1/2" Lower)
HOT1107 Tubular Upper A-Arms
HOT1109 Tubular Lower A-Arms
1967-70 Ford Mustang
TVS suspension products
for Ford Mustang.
Part No. Description
Chrysler/Dodge/ HOT1118U Upper A-Arms
Plymouth Products HOT14416 1968-70 Mustang Adjustable Strut Rod Kit
HOT1614 Machined Adjustable Tie Rod Sleeves
Part No. Description HOT22115 1967-70 Mustang Sway Bar Set
1967-72 Dodge A-Body HOT22115F 1967-70 Mustang Front Sway Bar Set
HOT22385F Front Sway Bar 1967-70 Mustang Coupe Fastback
1967-70 B-Body, Charger, Roadrunner, HOT2431
and Conv Sport Leaf Springs
Super Bee, GTX
HOT3018 Lock Plate Kit
HOT2255F Front Sway Bar
HOT4017 Sub Frame Connectors
HOT2255R Rear Sway Bar
HOT4010 Sub Frame Connectors HOT71020016 Tuned 1.5 Street Performance Series Rear Shocks
HOT19367 Torsion Bars
1970-74 E-Body, Challenger, 'Cuda 19641/2-66 Ford Mustang
HOT14366 Adjustable Strut Rods TVS suspension products
HOT23367 Front Control Arm Sway Bar Mounting Bracket
for Ford Mustang.
HOT79020015 1.5 Street Performance Shocks, Set Front and Rear

Part No. Description

HOT1117L-A Tubular Lower Control Arms w/Polyurethane Bushings, Pair
HOT14414 Strut Rod Kit
HOT1614 Adjustable Tie Rod Sleeves
HOT1930F Coupe Fastback/Conv Small Block Front Springs
HOT22114F Front Sway Bar Set
HOT22114R Rear Sway Bar Set
HOT2430 Coupe Fastback and Conv Sport Leaf Springs
HOT4017 Sub Frame Connectors
HOT71020016 Tuned 1.5 Street Performance Series Rear Shocks

2023 - 2024 HOT ROD AND EARLY MUSCLE 257

How-To Books
From carburetor tuning to complete engine rebuilds, HP has books for the novice or
HPPHP42 HPPHP36
the seasoned professional. Every book is packed full of photos and illustrations. HPPHP1566

Part No. Description Part No. Description

HPPHP36 How to Rebuild Ford V8 Engines HPPHP1190 How to Rebuild Big Block Mopar Engines
HPPHP42 How to Hot Rod Big Block Chevys HPPHP1302 Big Block Mopar Performance Handbook
HPPHP49 Turbocharger Handbook HPPHP1393 Rebuild Chevy LT-1/LT-4 Engines
HPPHP89 How to Rebuild Small Block Ford Engines HPPHP1400 Small-Block Chevy Engine Buildups
HPPHP473 Holley Carburetor Handbook (4150/4160) HPPHP1405 Hot-Rod Small-Block Mopar Engines
HPPHP511 Turbo Hydramatic 350 HPPHP1407 Chevy LSI/LS6 Performance
HPPHP708 How to Rebuild Big Block Ford Engines HPPHP1525 How to Rebuild & Modify Chrysler 426 Hemi Engines
HPPHP755 How to Rebuild Big Block Chevy Engines HPPHP1528 Mopar Six-Pack Engine Handbook
HPPHP1029 How to Rebuild Small Block Chevy Engines HPPHP1555 Rebuild and Powertune Carter/Edelbrock Carburetors
HPPHP1052 Holley Carburetors, Manifolds, & Fuel Injection HPPHP1559 Building Chevy LS Motors
HPPHP1566 Chevy LS Conversion

Neutral/Park Start Safety Switch

Pistol-Grip
HUR248-8600
Quarter Stick Shifters Kit includes switch and mounting hardware
The rugged pistol-grip handle is for easy installation with all existing Quarter
CNC-machined from aluminum and Sticks. (Newer Quarter Sticks and Pistol Grip Shifters have
has a precise, snap-action switch the switch already installed.) Fits front- and rear- exit cable
that is ideal for operating a Hurst Roll shifters.
Control, nitrous system, or trans brake.
Controlled detent activation.
Direct Fit T-Handles
Transmission Valve Body Part No.
Powerglide (Aluminum Case Only) Forward/Reverse HUR316-2001 HUR153-0040
TH250, 350, 375, and 400 Forward HUR316-2006 T-handles are quality die-cast aluminum 3/8"-16
TH250, 350, 375, and 400 Reverse HUR316-2001 thread size with polished finish and bold HURST identification.
Chrysler/AMC A727, A904 Reverse HUR316-2014
Ford C-4, C-6 Reverse HUR316-2014
B-4 Boot And Plate
Aluminum Cover Kit HUR114-4580
HUR130-0041 Popular boot is adaptable to most shifter
installations and includes chrome trim plate and
Add a professional, finished look to
mounting hardware. Measures: 3-1/2" x 4-1/2".
Quarter Stick and Pistol Grip installations.
Kit connects to shifter with quick-release pins (included)
and may be used with the aluminum mounting plate kit. Super Boot and Plate
Does not fit Quarter Stick 2 or Pistol Grip 2. HUR114-7494
Designed for large-hole shifter installations,
Classic Shifter Knobs unit includes chrome ID plate and mounting
Knob is the original Hurst classic design and hardware. Measures: 7-3/4" x 8-3/4".
is solid high-gloss, high-strength plastic
with an engraved inlaid shift pattern (1-3/4" Shifter Stick Thread Size
diameter).
Reference Chart
Thread Size 4-Speed (White) 5-Speed (White)
3/8"-16 HUR163-0003 HUR163-0008 Description Stick Thread Size
3/8"-24 HUR163-0002 — Hurst Shifters
12mm x 1.75 — HUR163-0014** Billet/Plus with Chrome Stick 3/8"-16
Billet/Plus with Black Stick Factory Original
** 2-1/4" diameter.
Comp/Plus (Early) 3/8"-24
Comp/Plus (Late) and OEM 3/8"-16
Pistol Grip Handles and Sticks Pro-Matic Before 1987 1/2"-13
Pro-Matic Since 1987 3/8"-16
HUR538-8575 Quarter/Stick and Q/S 2 7/16"-20
Handles and sticks are available for 1971-74 V-Matic 2 Since 1987 3/8"-16
“B" and 1970-74 “E" body Mopars, console OEM Shifters
and non-console applications. Ideal Camaro 6 Speed Internal Rail with OEM Stick 16mm x 1.50
replacements for original equipment, they Firebird 6 Speed Internal Rail with OEM Stick 16mm x 1.50
feature simulated wood grain handles and Mustang 5 Speed Internal Rail with OEM Stick 12mm x 1.75
angled levers. B&M Shifters, Most Automatic Shifters 1/2"-20

258 2023 - 2024 HOT ROD AND EARLY MUSCLE

Competition/Plus Shifters
Racetrack-proven design and reliability with a heat-treated linkage and adjustable gear stops to prevent overshifts and
prolong transmission life. Bolt-on, chrome-plated stick has an attractive custom white knob. Complete with all hardware and
easy to follow installation guide. For most popular 4-, 5-, and 6-speed transmissions.
Year/Model Description Transmission Shifter Only Installation Kit
Chevrolet
1967-68 Camaro With and without Console Saginaw HUR391-4339 HUR373-4531
1967-68 Camaro With and without Console Muncie HUR391-4339 HUR373-4529
1969 Camaro With and without Console Muncie HUR391-7438 HUR373-7437
1970-72 Camaro With and without Console Muncie HUR391-6848 HUR373-7897
1973-74 Camaro With Console Muncie HUR391-8791 HUR373-8605
1973-77 Camaro With Console Saginaw HUR391-7438 HUR373-8607
1964-67 Chevelle/Malibu With and without Console Muncie HUR391-7308 HUR373-3163
1968 Chevelle/Malibu With and without Console Muncie HUR391-8014 HUR373-3163
1969-72 Chevelle/Malibu With and without Console Muncie HUR391-8014 HUR373-7834
1978-79 Chevelle/Malibu With and without Console Saginaw HUR391-8794 —
1965-67 Chevy II/Nova With and without Console Muncie HUR391-7308 —
1968 Chevy II/Nova With Console Muncie HUR391-4339 HUR373-4529
1968 Chevy II/Nova Without Console Muncie HUR391-6848 HUR373-4529
1969-70 Chevy II/Nova Without Console Muncie HUR391-6848 HUR373-7131
1969-79 Corvette All Muncie And BW HUR391-7992 HUR373-8611
Ford
1967-69 Mustang 390, 428, 429 V8 with and without Console Ford T And C HUR391-3180 HUR373-5587
1970-73 Mustang 302, 351 V8 with and without Console Ford T And C HUR391-3180 HUR373-7637
Oldsmobile
1966 442 Without Console Muncie HUR391-7308 HUR373-3163
1978-79 442 With and without Console Saginaw HUR391-8794 —
Plymouth
1965-72 Belvedere/GTX Without Console New Process HUR391-6789 HUR373-4089
1968-72 Roadrunner Without Console New Process HUR391-6789 HUR373-4089
Pontiac
1967-68 Firebird With and without Console Saginaw HUR391-4339 HUR373-4531
1967-68 Firebird With and without Console Muncie HUR391-4339 HUR373-4529
1969 Firebird With and without Console Muncie HUR391-7438 HUR373-7437

Universal Roll/Control Quarter Stick Shifters

HUR174-5000 Excellent choice for an automatic
With a stainless steel valve transmission-equipped street
assembly and fully enclosed driver that may see occasional
molded electrical coil for drag strip action. A Quarter
reliability. The finned housing helps dissipate heat. Fully Stick is available to work with
rebuildable. Kit includes solenoid valve, switch, indicator forward or reverse-pattern valve
light, fuse, mounting screws, and instructions. bodies, and each includes neutral
safety switch and spring-loaded
reverse-lockout mechanism.
Roll/Control Adapter Fitting Kits
Transmission Valve Body Part No.
Adapter fitting kits simplify the Powerglide Forward/
installation of Roll-Control or HUR316-0001
(Aluminum Case Only) Reverse
Line-Loc systems in late model TH 250, 350, 375, and 400 Forward HUR316-0006
Camaros, Firebirds or Mustangs TH 250, 350, 375, and 400 Reverse HUR316-0001
with metric brake line fittings. Chrysler/AMC A727, A904 Forward HUR316-0009
Ford C4, C6 Forward HUR316-0009
Part No. Year/Model
Chrysler/AMC A727, A904 Reverse HUR316-0014
HUR567-1515 1985-96 Chevrolet Corvette
Ford C-4, C-6 Reverse HUR316-0014
HUR567-1516 1983-93 Ford Mustang

Roll/Control Installation Kit

HUR567-1510
Used for installation of most brake holding devices on
American made vehicles. Includes brake lines and various
brass fittings, connectors, adapters, unions, and plugs.

2023 - 2024 HOT ROD AND EARLY MUSCLE 259

Blackjack Shifter Kit for 1967 Blackjack Short-Throw
Camaro Shifter for Borg-Warner T5
HUR391-2004 Transmissions
The Blackjack shifter places the shifter HUR391-6045
handle in the proper location for 1967 Designed specifically for the Borg-Warner T5
Camaros with a Tremec TKO 500/600 or TR3550 5-speed transmissions from 1982-95 GM S10/S15 trucks being
transmission. Features a chrome flat bar stick with white used in transplant applications, this short-throw shifter
shift ball in a black anodized billet aluminum housing. offers smooth, precise shifts and easy installation.
Dual stick centering pins, hardened chromoly pivot pins, Features include a black anodized billet aluminum
and a Delrin pivot ball ensure quiet, positive operation. housing, a hardened chromoly stick adapter, dual stick
Can be used with or without factory center console. centering pins, hardened chromoly pivot pins, and a
Delrin pivot ball ensure quiet, positive operation. Includes
mounting hardware.

Door Kit
Kit has ten 12" x 12" sheets of
HushMat Ultra (10 square feet) and
is available with black or silver foil.
Starter Kit A door kit effectively treats two
Kit has four 12" x 12" sheets of doors, covering 65% of the door
HushMat Ultra (4 square feet) and skin surface area.
is available with black or silver foil. A starter kit is perfect
for treating a single panel or treating a repair. Excellent for Part No. Description
HMT10201 Silver Door Kit
treating a door, quarter panel or hot tunnel.
HMT10200 Black Door Kit
Part No. Description
HMT10151 Silver Starter Kit
HMT10150 Black Starter Kit
Bulk Kit
Kit has thirty 12" x 23" sheets of
HushMat Ultra (58 square feet) and
Hoodliner Insulating Kit is available with black or silver foil.
HMT50100 A bulk kit is enough to treat a mid-
A constrained-layer damper that uses size or smaller vehicle covering
foil film to reflect heat away from the approximately 60% of the sheet metal surface area.
hood and custom paint job. The liner Part No. Description
adheres with high-temp butyl polymer HMT10501 Silver Bulk Kit
adhesive rated to 400°F and conforms beautifully to the HMT10500 Black Bulk Kit
contours of the hood surface. Contains six 12" x 23" Sheets.
Silencer Megabond™ Foam
Trunk Kit Silencer Megabond foam
Kit has ten 12" x 23" sheets of HushMat insulates against heat and high-
Ultra (19 square feet) and is available frequency sound, and is backed
with black or silver foil. A trunk kit with an aggressive butyl-based
effectively treats the trunk floor, spare adhesive.
tire well, rear quarter panels and rear 1/2" Thick Silencer Megabond
deck. This eliminates road noise, vibration and exhaust noise
entering the vehicle through the trunk. HMT20300
Includes four 12" x 23" sheets (8 square feet) for treatment
Part No. Description
HMT10301 Silver Trunk Kit
of high thermal transfer areas of the vehicle interior (hot
HMT10300 Black Trunk Kit firewalls, tunnels, and trunk floors). Sticks to sheet metal
or directly onto aluminum surface of HushMat Ultra for a
Floor/Dash Kit cool and quiet interior.
Kit has twenty 12" x 23" sheets of 1/4" Thick Silencer Megabond
HushMat Ultra (39 square feet) and HMT20200
is available with black or silver foil. A Includes two 23" x 35" sheets (11.5 square feet) for
floor/dash kit treats the front of the reducing heat transfer and quieting wind noise (back of
dash panel, driver front and rear floor, door trim panels and back of the headliner).
passenger front and rear floor, and
tunnel. This reduces heat and eliminates vibration entering
through the dash and floor. Hush Pro Roller
Part No. Description HMT90100
HMT10401 Silver Floor/Dash Kit Use this flexible, translucent installation
HMT10400 Black Floor/Dash Kit tool to apply HushMat hood insulation kits.
260 2023 - 2024 HOT ROD AND EARLY MUSCLE
Universal LS/LT LS Engine Oil & Coolant Sensor Gauge Master
Heater Core Hose Set Adapter Kit
ICT551065 ICT551156
A must for LS/LT swaps Adapters allow the use of
that retain the heater core. all SBC/BBC sensors in all
Designed to work with OEM water pump outlet sizes, this LS-series powerplants. Made
set includes a 5/8” I.D. hose and a 3/4” I.D. hose. from aerospace grade billet
60" length. aluminum. The 6-piece kit
includes the following adapters: M16-1.5 male to 1/8" NPT
Universal LS/LT Swap Remote Coil Ignition (oil pressure), M16-1.5 male to 1/4" NPT (oil pressure),
M12-1.5 male to 1/8" NPT (coolant temperature sensor),
Wire Set M12-1.5 male to 3/8" NPT (coolant temperature sensor),
ICT551083 extended length M12-1.5 male to 3/8" NPT (coolant
This universal kit will temperature sensor), and M12-1.5 male to 1/2" NPT
create a complete (coolant temperature sensor).
ignition wire set for LS/LT
powerplants, regardless TH350/400 Converter Hub-to-LS1 Flexplate
of the coil locations. Kit
includes (8) 60” long spiral
Crankshaft Adapter
core 8mm ignition wires with 135° coil ends, (8) 90°spark ICT551165
plug boots with terminals, and (8) straight spark plug This steel hub adaptor allows a
boots with terminals. Works with standard spark plug Powerglide, TH400, 4L80E, TH350,
wire crimper. Made in the USA. 2004R, 700R4, 4L60, and 4L60E
(from non-LS engine) torque
Transmission Adapter Fitting converter snout to mate with a LS/
Replaces factory quick LT powerplant.
disconnect hard lines. GM TH400/ Note: Not required for 99-00 6.0L.
TH350/4L60E/4L80E and Ford AOD
CR5/4R70W applications. LS Extended-Length Water Temperature
Part Description Sensor Adapter
ICT551114 1/4" NPSM to -6AN Hose, Pair
ICT551124 -6AN to -6AN Flare, Pair ICT551179L
Adapts SBC/BBC (3/8" NPT)
SBC to LS Heavy-Duty coolant temperature sensors to
fit into LS series cylinder head.
Engine Mount Adaptor Extends 1.7". Aerospace billet
ICT551128-301 aluminum. Made in the USA.
Positions an LS-powerplant in
the same crankshaft position LS Truck Oil Drain Adapter
as the small block Chevy.
Aerospace-grade billet aluminum plates bolt directly ICT551208
to the small block Chevy engine mounts. Actual motor Allow use of -10AN male adapter to
mounts not included. Made in the USA. add oil pan drain hose.

LS Harmonic Balancer LS Cathedral Port Cylinder Head to Rectangular

Installation Tool Port Intake Manifold Adapters
ICT551141 ICT551316
Compatible with all Exclusively for
1997-newer LS/LT series engines. Tool includes threaded cathedral cylinder
stud, washers, and a flange nut. heads and adapts
to rectangular
port intakes,
LS Hamonic Balancer supercharger, or
Removal Tool blower. The kit
ICT551329 includes (2) 1.2”
The three-jaw puller thick adapter plates,
attaches to the rear balancer tangs, allowing for removal O-rings, and 70mm
of harmonic balancer. Tool includes puller, threaded bolts with sealing washers. Aerospace billet aluminum.
screw, and three dowels. Made in the USA.

2023 - 2024 HOT ROD AND EARLY MUSCLE 261

SBC to 2014-Newer LT/LT1 Engine LS/LT/Gen 5 LT1/LS3 Remote Mount Coil
Swap Brackets Relocation Brackets
ICT551363X ICT551532
Allows a LT-series engine Ideal for turbocharged
to be bolted into a vehicle applications. Only fits D580
that was originally built with and D510C coils. Kit includes
a small block Chevy. The two sets of billet aluminum
billet aluminum plates move brackets with necessary
the crankshaft centerline bolts, and spacers. Coils not
up 0.72.” Includes two plates, (8) flat-head bolts, and (6) included. Made in the USA.
flanged M10-1.5 bolts. Made in the USA.
Oil Pressure
Relocation Adapter
LS1/LS6 Fuel Injector Spacer Set Billet aluminum adapter with
ICT551371 hardware.
Typically used when Part Description
swapping an LS1 or LS6 ICT551534 LS/LS1 (Except GTO Front Sump Oil Pans and LS4 Oil Pans)
intake Into an LS-powered ICT551541
LS Truck, G8, & LS3 Camaro Oil Pans with Dual 1/8” NPT
truck. Adds 17.3mm (0.69”) Ports
to the injector length. The
set of eight billet aluminum Small Block Chevy Valve Cover Adapters
spacers is made in the USA. ICT551542
Allows 1955-86 Chevy
LSA/LS9/LT4 Supercharger MAP Port Plug perimeter bolt valve covers
ICT551383 to bolt-on 1987 and newer
The billet aluminum plug fits small block Chevy center
both MAP sensor ports. Plug bolt applications. Billet
includes bolt and O-ring. Made aluminum. Not for use with
in the USA. full roller rocker arms.

75mm LS Throttle
Body Adapter
This aluminum plate for
75mm throttle body adapts
a 4-bolt intake to a 3-bolt
throttle body. Includes
gasket.
Part Description
ICT551511XG Drive by Cable, 75mm
ICT551513 Drive by Wire and Drive by Cable, 92mm tapers to 75mm
ICT551567 Drive by Wire, Compatible up to 102mm Intake Manifold

LS Truck Alternator &

Power Steering Kit
ICT551519X-3
This set of components
relocates the alternator
to the driver’s side of the
engine and moves the power
steering pump one inch
closer to the engine on 1999-14 GM trucks equipped with
an LS-powerplant. Kit includes billet aluminum bracket,
idler pulley, and mounting hardware.

262 2023 - 2024 HOT ROD AND EARLY MUSCLE

LS-Engine MAF Sensor Bung LS Engine-
ICT551545 Transmission Bell
Billet aluminum. Radius cut to Housing Bolt Set
accept 4-inch tubing. Compatible
with GM LS3/LS7 and LT as well as
ICT551652
Ford Coyote. Includes two bolts. Fits all compatible GM automatic and manual
Each. transmissions. The zinc-coated Grade 10.9, JIS head
bolts are 35mm long. Torque specification: 37 ft./lb.
Quantity 8.
Oxygen Sensor
LS Coil Bracket Set for D581 Coils
Bung & Plug Set
ICT551654
ICT551548 This pair of billet aluminum
M19-1.5 mild steel oxygen sensor brackets will mount D581 coils
plug and bung. Set includes two 1-1/8” lower toward the center
bungs and two plugs. Made in the of the valve cover from the
USA. original factory location. Not
compatible with LSA or LS9
valve covers. Made in the USA.
LS Gen IV Valley Pan Cover Plate for DOD Delete
ICT551605 LS1 Dual Oil Feed Plate
Billet aluminum ICT551666
O-ringed cover plate Heavy-duty ½” thick aluminum plate
is compatible with with two 1/8”-27 NPT ports. O-ring and
Gen IV LS engine mounting bolts.
blocks. No need to
drill, tap, or plug DOD oil port. Must relocate oil pressure
sensor. Includes O-rings, stainless steel bolt, and valley
pan. Made in the USA. LS1 Camaro Low-Mount Alternator Bracket
ICT551667EWP-2
LS1 Turbo Oil Port Adapter Designed for 1998-02 Camaro
Used for an oil pressure LS1 applications with electric or
sensor or turbocharger remote water pump, this billet
oil feed line. This plate Is aluminum low-mount alternator
compatible with all LS oil bracket includes tensioner,
pans, except GTO front-sump idler pulley, and necessary
oil pans, dry-sump oil pans hardware. Made in the USA.
(LS7, LS9, etc), and LS4 oil
pans. The billet aluminum LS Truck Low-Mount
plate has a 1/8” NPT port and Alternator Bracket Kit
includes an O-ring and mounting bolts. Made in the USA.
Part Description
ICT551668-3
ICT551608 Oil Supply Port Designed forLS3/L99 truck and
ICT551621 Oil Cooler Port SUV applications, the kit includes
two billet aluminum brackets,
and idler pulley, and necessary
Billet LS Valley hardware. Made in the USA.
Pan Cover Plate
Designed specifically
for Gen III LS LS Coolant Steam Crossover Hose Kit
powerplants, this ICT551675
billet aluminum valley Installs on the
pan cover plate and is packaged with stainless steel front or rear of the
mounting bolts. Gasket not included. Made in the USA. cylinder heads.
Part Description This kit includes
ICT551629 Gen III, Knock Sensor Delete a passenger side
ICT551629G Gen III, Knock Sensor Delete, with Gasket adapter with two
ICT551646 Gen IV, DOD Delete, Requires 1/8” NPT Plugs 1/8” NPT ports, a driver side adapter with one 1/8” NPT
port, as well as (2) O-rings, (2) coolant ports, one ¼” hose
barb fitting, and stainless braided hose. Adapter is made
from billet aluminum. Made in the USA.

2023 - 2024 HOT ROD AND EARLY MUSCLE 263

LS-Series Oil Pan Bolt Set LS/LT Header
ICT551680 Installation Bolt Set
This set of 15 clear zinc-coated ICT551696
grade 10.9 flanged steel bolts This set of metric flanged
for 1997-14 LS Series engines Is header installation bolts Is compatible with all 1997 and
made in the USA. newer LS and LT series engines. Clear zinc-coated grade
10.9 steel bolts. Set of 12.
LS1 Starter Bolt Kit
ICT551681 LS/LT Heater Core Delete Hose
This clear zinc-coated, ICT551699
grade 10.9 three-bolt set, The specially designed molded
two long and one short, is rubber hose is designed to loop
designed to accommodate the heater hose outlets on a LS/LT
factory-style starters. water pump when the heater core
Made in the USA. is not needed.

LS1 Camaro to Truck Water Pump Adaptor

Swap Kit LS Front Motor Plate
ICT551690-71 One-piece 1/4”
Used for mounting thick aluminum
1998-02 LS1 Camaro front motor plate
water pumps onto designed for LS-
LS Truck/SUV series applications.
applications. The .70” 14” tall x 36” wide.
wide billet aluminum adapters keep belt properly aligned. Part Description
The kit includes (2) spacers, (4) gaskets, a 1/8” NPT steam ICT551802 Lightened
ICT551805 Standard
port plug, and necessary bolts. Made in the USA.

LS Coolant/Steam Port Crossover Kit V8 Chevy Mid Plate

ICT551692 ICT551804
Works with all LS-series Compatible with
engines. Kit includes two all V8 Chevy
billet aluminum threaded powerplants. 1/4”
coolant ports and plugs thick x 12” tall x 36”
as well as (4) bolts, (4) wide.
O-rings, and a steel
braided hose.
LS Oil Pump Pickup Girdle
LS Coolant/Steam Port Block ICT551910
Off Plate Set This improved design
supports the oil pump pickup
ICT551693 flange with two bolts (OE
Works with all LS-series engines. design uses only one). Billet
Set includes two billet aluminum aluminum constructed girdle
block off plates, bolts, and O-rings. bracket includes the two
Set of two. mounting bolts. Made in the
USA.

TH350 Kick-Down Cable Plug

LS Coolant/Steam ICT551916
Port Crossover Kit This billet aluminum
ICT551694H plug is needed onTH350
Works with all LS-series transmissions with a manual
engines. Kit includes two valve body when a detent
billet aluminum threaded cable being used. Include bolt
coolant ports, two bolts, and O-ring. Made in the USA.
two O-rings, and a braided
steel hose.

264 2023 - 2024 HOT ROD AND EARLY MUSCLE

LS/LT Crankshaft & Damper Fuel Injector
Drill Pinning Fixture Harness Adapter
ICT551917 Electrical wire connections
for USCAR EV6 fuel injectors.
Strengthen and minimize
Assembled with OEM tooling.
slip with this crankshaft
Made in the USA. Set of eight.
and damper drill pinning
fixture. A must when Part Description
ICTWAINJ31 Jetronic EV1 style connector to USCAR EV6 Injectors
adding a supercharger.
ICTWAINJ32 Mini Delphi Multec 2 Harness to USCAR EV6 Injectors
Compatible with Gen III,
IV, and V powerplants.
The kit includes the drill
sleeve fixture, a high-grade drill bit, tool hold-down bolt,
and (4) 1/4” diameter dowel pins. Made in the USA. Harness Adapter LS
Gen III to Gen IV Map
LS Flexplate Bolt Set Sensor
ICT551926 ICTWAMAP31-6
LS1/2/3/6 and 7 series powerplants 6” long plug and play
with 6-bolt crankshaft. Six high- adapter harness.
strength grade 12.9 bolts. Made in the
USA.
Extended Length LS Coil Wire Harness
ICTWEC0I30
Ideal for relocating coils
Top Radiator Hose Steam Port Adapter under the engine. Compatible
Adds a 1/8” NPT port into the LS with LS1, LS2, LS3, LQ4
engine top radiator hose. Ideal for and LSX (Gen III and Gen IV)
steam port recirculation or gauge powerplants. OEM grade TXL
sensor mounting. Billet aluminum. wire. 24” long. One per coil.
Made in the USA.
Part Description
ICTAN627-20X125 1-1/4” to 1-1/4” Hose Barb
ICTAN627-20X125 1-1/4” to 1-1/2” Hose Barb Coil Wire Harness Extension
ICTWEC0I34-30
Ideal for creating a
M16-1.5 to -4AN custom look. Compatible
Turbocharger Oil with LS2, LS3 (Gen II and
Gen IV) powerplants.
Feed Adapter Not compatible with LS1
ICTAN816-04-M16 Camaro D580 coils. TXL
Works with all LS-series powerplants. Supplies oil to wire. 30” long. One per
turbocharger. Billet aluminum. Made in the USA. engine bank.

Steering Columns
All columns have a 2“ diameter tube and 1"
DD lower shaft unless noted otherwise.
Part No. Description
Universal Paintable Steel Steering Columns
IDI1010280010 28” Steel Non-Tilting Column, No Shifter
IDI1120300010 30" Steel Tilting Column, No Shifter
IDI1120320010 32" Steel Tilting Column, No Shifter
IDI1130330010 33" Steel Tilting Column with Shifter
IDI1130350010 35" Steel Tilting Column with Shifter
Universal Chrome Steel Columns
IDI1120320020 32" Chrome Steel Tilting Column, No Shifter
Universal Black Powder Coated Steering Columns
IDI1120300051 30" Steel Tilting Column, No Shifter
IDI1120320051 32" Steel Tilting Column, No Shifter

2023 - 2024 HOT ROD AND EARLY MUSCLE 265

 Collapsible Underdash Mount
IDI2301310010
30" Classic Column Designed specifically for use with
IDI1011300010 Ididit’s collapsible series steering
The steel-finished Classic is a straight steel column for columns, these mounts feature aluminum
the traditional street rod. With a 1-3/4" diameter tube and release blocks that will slip or release in an impact to
3/4" 36-spline, the column accepts standard steering allow the mount to collapse forward away from the driver
wheel adapters, but looks best with 3-, 5-, or 6-bolt along with the rest of the steering system.
Corvette adapter. The column is wired for turn signals,
four-way flashers, and horn using a 3-7/8" GM-style plug. Sidestep
Safely and easily relocate the
Old School Steering Column position of the steering shaft
to provide added clearance
IDI1012360010 under the hood, or in the cab for more leg room. Made
Old School cut-to-length column is a sleek of aircraft-grade billet aluminum, the Sidestep uses a
design, perfect for roadsters. It is 36” but double roller chain that withstands 10x the OEM failure
can be cut down to as short as 6". Paintable load, based on in-house testing. The Sidestep measures
finish. Made in the USA. 3" wide x 2" deep (not including splines), with 3/4"-36
spline output shafts and a choice of 8", 12", or 16" lengths,
PRO-Lite Steering Column and is available with raw or polished aluminum finish.
Weighing under six pounds, this Part No. Desc. Size Finish
steering column is loaded with great IDI2805080030 Sidestep Steering Box 8” Raw Aluminum
features for both the street and IDI2805120030 Sidestep Steering Box 12” Raw Aluminum
racetrack. Driver safety is enhanced IDI2805160030 Sidestep Steering Box 16” Raw Aluminum
with five inches of collapsibility
and designed to work with most quick release steering GM Replacement Column Drop
wheel hubs. Other features include turn signals, four- IDI2310000030
way flashers, wiring for a horn, and Ididit’s plug-in wiring A direct replacement for the unattractive
connectors. Columns are manufactured for specific stock column mounts found in 1969 and
vehicle applications, with a durable matte black finish. later cars and trucks. Easy to install. Has a
Steering wheel adapters sold separately. Made in USA. brushed finish.
Part No. Description
IDI1350680056 1967-68 Camaro
IDI1350642056 1965-66 Mustang Collapsible Floor Mount with Plate
IDI1350646056 1962-66 Nova Mount an Ididit collapsible steering column
IDI1350790056 1969 Camaro to the floor or firewall. Can be installed on
IDI1350860056 1970-75 Camaro either side of the body. Made of steel.
Part No. Description
Steering Column Mounts IDI2401110010 1-1/2" Collapsible Floor Mount with Plate
IDI2401010010 2" Collapsible Floor Mount with Plate
Adjustable
Floor Mount
Swivel Ball Style Aluminum
Steel Column
Adjustable Lower Column Mounts
Floor Mount
Drop, Weld-On with Trim Kit Part No. Description
Style IDI2401500040 2" I.D. Polished Aluminum Swivel Ball Floor Mount
IDI2402500040 2-1/4" I.D. Polished Aluminum Swivel Ball Floor Mount
Part No. Description
Column Drops
IDI2302470040 2" Column Drop, 2-1/2" Polished Cable Operated Column Shift Linkage
IDI2303470040 2" Column Drop, 3-1/2" Polished
IDI2302370040 2-1/2" Column Drop, 2-1/4" Polished IDI2802000010
IDI2302370030 2-1/2" Column Drop, 2-1/4" Brushed AL The solution to the clearance
Adjustable Floor Mounts problems encountered when
IDI2400300010 Adjustable Floor Mount for 1-3/4" Dia. Column building a hot rod. Versatile cable-
IDI2401300010 Adjustable Floor Mount for 2" Dia. Column operated shifting mechanism
IDI2401800010 Adjustable Floor Mount with Trim Kit for 2" Dia. Column will attach to the bottom of most
IDI2402300010 Adjustable Floor Mount for 2-1/4" Dia. Column aftermarket columns. This kit is
Black Boot
for a 2-1/4" diameter column and
IDI2405810010 Black Boot for Trim Kit
works with all GM transmissions except Powerglide.
Drop Under Dash Mounts
IDI2302680010 2-1/2" Drop under Dash Mount
IDI2310000040 GM 1969 or Newer 2" Column Drop, Polished AL
IDI2301050010 1947-54 Chevy Truck Dash Bracket
IDI2302170030 GM 2-1/2" Column Drop, 2-3/8" Brushed AL
GM 1969 or Newer Underdash Mount 2" Column Drop,
IDI2310000040
Polished AL

266 2023 - 2024 HOT ROD AND EARLY MUSCLE

 IDI1140680051

Retrofit Steering Columns

Make it a full restoration by adding a new steering column. Application specific. Easy to install: just remove
the old column, save the original dash and mounts, connect to the old wiring harness and the job is done.
Standard features include: tilt, self-cancelling turn signals, 4-way flashers, knobs, handles, and wiring
connectors
Floor Shifter Columns Column Shifter Columns
Shaft Paintable Black Powder Chrome Polished Paintable Black Powder
Year/Model Size Steel Column Coated Column Column Aluminum Steel Column Coated Column
Chevrolet
1959-60 Impala/El Camino 3/4"-36 IDI1120600020
1962-66 Nova 3/4"-36 IDI1120646051 IDI1120646020
1965-66 Impala 3/4"-36 IDI1120660020
1967-68 Camaro/Firebird 1"-48 IDI1120680010 IDI1120680051 — — —
1969 Camaro 3/4"-36 — IDI1520790051* IDI1520790020* — —
1964-65 Chevelle/El Camino/
1"-48 IDI1120640010 — — — —
GTO
1967-68 Chevelle/El Camino/
1"-48 IDI1120680010 — — — IDI1140680051
GTO
1969-72 Chevelle/El Camino/
1"-48 IDI1520690010* IDI1520690051* — — —
GTO
1963-66 Corvette 3/4"-36 — IDI1120770051 — — —
1967 Corvette 1"-48 IDI1300710051
1969-76 Corvette Extendable 3/4” DD IDI1520710051*
1967-72 Chevy Truck 3/4"-36 — IDI1120657051 — IDI1070658040 IDI1140657010 IDI1140657051
1967-72 Chevy Truck with Rack IDI1140658010
1947-54 Chevy Truck — IDI1120651010** — IDI1120651020 — —
1955-59 Chevy Truck — IDI1120652010** — — IDI1140652010** —
1955-59 Chevy Truck — IDI1120651010 — — — —
1960-66 Chevy Truck — IDI1120650010 — — — —
1963-64 Impala 3/4"-36 Lower Shaft — — IDI1120670020 — —
Jeep
1976-86 with Key 1" 48 Lower Shaft — — IDI1520800020 — —
Ford
1965-66 Mustang with Rack 3/4"-36 IDI1120644010 IDI1120644051 — — IDI1120647151
1967 Mustang with Rack 3/4"-36 IDI1120645010 IDI1120645051 — — —
1969 Mustang 3/4"-36 IDI1300646010 — — — —
1968-69 Mustang 3/4"-36 — IDI1300644051 — — —
1965-66 Ford 1/2 Ton Truck 3/4"-36 Lower Shaft IDI1170825010 IDI1130821051
1967-72 Ford 1/2 Ton Truck with
3/4"-36 Lower Shaft IDI1170740010 — — IDI1130741010 IDI1130741051
Power Steering
1967-72 Ford 1/2 Ton Truck with
3/4"-36 Lower Shaft IDI1130731051 IDI1130731010
Manual Steering
1973-77 Ford 1/2 Ton Truck 3/4"-36 Lower Shaft IDI1130751010 IDI1130751051
1978-80 Ford 1/2 Ton Truck 3/4"-36 Lower Shaft IDI1130811051
Plymouth
1970-74 Cuda/Challenger 3/4"-36 — IDI1620810051* — — —
* Includes column ignition switch. 1 Uses stock Mustang wheel and wiring harness ** Includes DD Lower Shaft

Steering Column Column Dress-Up Kit

Shift Indicators and Dash Knobs
Made from high-quality Deco-style knobs have a
acrylic, this easily installed stepped appearance and look
IDI2600200051
indicator is inexpensive like they are right out of the
and works great. 1930s, while the standard knob IDI2500000040

Part No. Description is a simple tapered style.

IDI2600000010 Clear Shift Indicator for 3-Speed Automatic Transmission Part No. Description
IDI2600050010 Clear Shift Indicator for 4-Speed Automatic Transmission Column Dress-Up Kits
IDI2600200020 3-Speed Indicator with Chrome Housing Standard Style Column Dress-Up Kit.
IDI2600200051 3-Speed Indicator with Black Housing IDI2500000020 Includes Turn Signal Knob and Lever, Tilt Knob and Lever,
IDI2600250020 4-Speed Indicator with Chrome Housing and 4-way Flasher Button, Chrome Plated
IDI2600250051 4-Speed Indicator with Black Housing Dash Knobs
IDI2503100040 1/4" Bore, Polished Aluminum

2023 - 2024 HOT ROD AND EARLY MUSCLE 267

Steering Column Accessories
Year/Model Description Part No.
1969 Camaro With Ignition Rag Joint for Mating 3/4"-36 Column to 3/4"-30 Manual Box IDI3000053431
1969-73 Nova With Ignition Rag Joint for Mating 3/4"-36 Column to 3/4"-30 Manual Box IDI3000053431
1955-68 GM Horn Kit for Mating 1955-68 GM Stock Steering Wheel to Ididit Column IDI2612100040
Installation Kit U-Joint Manual Box 3/4DD x 3/4"-36 IDI3000013449
IDI3000053431

Steering Wheel Adaptors

Ididit steering wheel adaptors allow installation of 3, 5, 6, or 9-bolt steering wheels on the tapered, splined top shaft of a
steering column. Designed to fit all Ididit columns, as well as most 1969 or newer GM passenger cars, they secure in place
with a single nut, and include a horn wire for most applications.

9-Bolt Adaptors
9-bolt pattern adaptors fit aftermarket steering wheels
from Lecarra, Billet Specialties, Budnik, Colorado
Custom, and others.
Description Brushed AL Polished AL IDI2201300040
Standard No Horn — IDI2201300040
Standard with Horn IDI2201310030 —

5 and 6-Bolt Adaptors

5-bolt adaptors for Grant and 6-bolt adaptors for Lecarra
steering wheels include a horn button. Corvette 6-bolt
adaptors do NOT include a horn button because one is
integrated into the steering wheel.
Description Brushed AL Polished AL Chrome AL
6 Bolt Lecarra IDI2201300030 — IDI2202310020 IDI2202360040
6 Bolt Nardi IDI2202340030 —
6 Bolt 1956-62 Corvette — IDI2202360040
5 Bolt Universal IDI2207310030

3-Bolt Adaptors
Common applications for standard 3-bolt adaptors
include Grant and Wheel Shoppe.
IDI2208310030

Description Brushed AL Polished AL

3-Bolt Standard IDI2208310030 IDI2208310040

Quick-Release Steering Hub

Quick-release steering hubs make mounting and removal of the steering wheel fast and easy, improving entry and exit from
the vehicle.
Part No. Description
IDI5010000015 5-Bolt 3/4 Smooth Kit
IDI5010000019 5-Bolt OE Chevy Kit
IDI5010000020 5-Bolt OE Ford Kit
IDI5010000018 6-Bolt 3/4 Smooth Kit
IDI5010000022 QRSH 6-Bolt OE Chevy Kit
IDI5000001020 3-Bolt Squeeze-Style Quick-Release Hub 1/4-28
IDI5000001060 5-Bolt OE-Type Quick-Release Hub
IDI5000001050 5-Bolt Squeeze-Type Quick-Release Hub
IDI5000001070 6-Bolt OE-Type Quick-Release Hub
IDI5000001040 6-Bolt Squeeze-Type Quick-Release Hub

IDI5010000012

268 2023 - 2024 HOT ROD AND EARLY MUSCLE

Performance Drop Column Mount Shift Indicator
Designed for use with tube Part No. Description
chassis or rollcage equipped IDI2600150010 4-Speed, P-R-N-D-1-2, Clear Acrylic Indictor
vehicles utilizing a Pro-Lite IDI2600270030
1992 & Newer Ford AODE, P-R-N-D-3-2-1, Aluminum
or 2” diameter steering Housing with Clear Acrylic Indicator
column. Mounts to 1-3/4”
or 1-5/8” diameter tubing.
Billet aluminum construction
with required stainless steel
hardware. Black anodized
finish.
Part
IDI2320300050
Description
3” Drop
Rag Joint Flexible
IDI2320550050 5-1/2” Drop Steering Coupler
IDI2320800050 8” Drop Part No. Description
IDI3000053449 3/4" -36 Spline x 3/4" Double-D
Horn Relay IDI3000053434 3/4" -36 Spline x 3/4"-36 Spline

IDI2620000013
12-volt. 3 pin. Cruise Control Steering Column Lever
IDI3100005024
Rosta cruise control steering
GM Turn Signal Switch Harness column lever for 1982 and
earlier ididit GM steering
IDI2620000101 columns.
Replacement turn signal switch
harness for GM ididit steering
columns.
Steering Column Wiring
GM Shift Linkage Cable Kit Harness Kit
This harness allows the
IDI2801050010 ididit steering column to
For use with ididit GM 2” column to GM be used with the vehicle’s
transmission. Kit includes 72” long factory wiring. The kit has
standard shift cable, brackets, and the added convenience and
hardware. safety of a 4-way flasher.
Part No. Description
IDI3100035775 1955 Chevy/1953-62 Chevy Corvette
IDI3100035785 1957-58 Chevy
Billet Lever Kits IDI3100037616 1959-62 Chevy/1963 Chevy Corvette
Machined from 6061 Billet Aluminum, these kits are
designed for quick and easy installation. Each kit comes Cruise Control Kits
with a turn signal lever, tilt lever, 4-way flasher knob, and IDI3100010000
installation hardware. Rostra electric servo unit uses solid-state electronics
for accuracy and reliability. Servo and control unit are
small enough
to fit under
any dash. Kits
include pulse
Part No. Description generator
Grip Style and control
IDI2500300030 Brushed Aluminum handle. For
IDI2500300051 Black Anodize
computerized
IDI2500300060 Gold Anodize
Truss Style
engines
IDI2500310030 Brushed Aluminum
IDI2500310051 Black Anodize 1967 Ford Mustang Column Floor Mount
IDI2500310060 Gold Anodize
IDI2400010210
Direct replacement for original
1964-66 Ford Mustang Column Dash Mount floor mount.
IDI2312310010
Two-piece dash mount.
Natural steel.

2023 - 2024 HOT ROD AND EARLY MUSCLE 269

 Flat Bottom Fuel Cells
Aluminum Fuel Cells Cells have seamless rotomolded
cross-linked polyethylene
outer shells, D-ring handle cap
assemblies with check valve
vent, fuel level sending units JAZ201-016-01
(installed), one anodized -8AN
outlet fitting with internal pickup hose,
and one anodized -8AN tip valve vent
fitting.
JAZ210-620-03 JAZ210-510-03
Size Length Width Depth Ohms With Foam Mount Kit
JAZ fuel cells are made of .090" 5052 aluminum alloy. All 12 Gal. 17-1/2" 16" 10" 0-90 — JAZ400-012-03
cells are complete with foam, -8 male inlets/outlets, and 16 Gal. 25" 17" 10" 70-10 — JAZ400-016-03
a two-inch deep sump. 16 Gal. 25" 17" 10" 0-90
JAZ202-
JAZ400-016-03
016-01
Description Length Width Height Part No.
JAZ202-
10-Gal. Aluminum Fuel Cell 17" 17" 9" JAZ210-510-03 22 Gal. 33" 17" 10" 0-90 JAZ400-122-03
122-01
15-Gal. Aluminum Fuel Cell 20" 18" 10" JAZ210-515-03
15-Gal. Aluminum Fuel Cell
With Sender
20" 18" 10" JAZ210-615-03** Fuel Cell Accessories
20-Gal. Aluminum Fuel Cell Part No. Description JAZ350-301-03
20" 24" 10" JAZ210-620-03**
With Sender JAZ850-200-01 Aircraft Cap Gasket
** Cells have 0 to 90 ohms (GM Type) fuel level sending units. JAZ340-200-06 Aircraft Cap
JAZ850-201-01 6-Bolt Aircraft Flange Gasket
JAZ350-201-06 6-Bolt Aircraft Cap Assembly
14-Gallon Street Rod Cell JAZ850-300-01 Bail Handle Cap Gasket
JAZ210-614-03 JAZ340-300-06 Bail Handle Replacement Cap
Made from 5051 aluminum and TIG-welded for strength, JAZ350-301-06 Bail Handle Cap Assembly
unit has mounting tabs for easy installation, JAZ850-301-01 12-Bolt Flange Gasket
0-90 Ohm sending unit and three
-8AN fittings. Fuel Level Senders JAZ850-201-01
Cell measures Part No. Length Ohm
9-1/2" x 12-1/4" x 30-1/4". JAZ378-070-03 8-1/2" 70-10
JAZ378-090-03 8-1/2" 0-90
JAZ378-240-03 8-1/2" 240-33
JAZ371-070-03 11" 70-10
JAZ371-090-03 11" 0-90
Fuel Cells with JAZ378-090-03
Sump One-Quart OverFlow
Includes flush mount Seamless cross-linked polyethylene shell has 1/4"-20
aircraft-style cap assembly, two-inch deep sump in threaded mounting inserts, 1/4" barbed inlet fitting in the
rear for better fuel pickup, two anodized -8AN fast flow top and 1/4" barbed lever handle petcock in the bottom.
outlet fittings, one Overflow tanks meet all sanctioning requirements for a
anodized -6AN vent one-quart overflow.
fitting, pre-installed
Part No. Color
fuel level sending unit, JAZ600-025-01 Black
and 360° mounting JAZ600-025-05 Natural
strap recesses. Cells JAZ600-025-06 Red
are available with 0-90 JAZ600-025-11 Blue
Ohm, 70-10 Ohm, or JAZ600-025-11
240-33 Ohm sending One Quart Recovery
units. JAZ252-016-01 Seamless cross-linked polyethylene shell has molded in
Size Length Width Depth Ohms With Foam Mount Kit 1/4"-20 threaded mounting inserts. Includes 1/4" barbed
12 Gal. 17-1/2" 16" 10" 70-10 — JAZ400-012-03 inlet fitting in the bottom and 1/4"
12 Gal. 17-1/2" 16" 10" 0-90 JAZ252-012-01 JAZ400-012-03
barbed vent fitting with hose in
16 Gal. 25" 17" 10" 70-10 JAZ251-016-01 JAZ400-016-03
16 Gal. 25" 17" 10" 0-90 JAZ252-016-01 JAZ400-016-03
the top. Radiator recovers fluid as
16 Gal. 25" 17" 10" 240-33 — JAZ400-016-03 needed.
16 Gal. 18-1/2" 18-1/2" 12" 70-10 — JAZ400-016-03 Part No. Color
16 Gal. 18-1/2" 18-1/2" 12" 0-90 JAZ252-116-01 JAZ400-116-03 JAZ602-025-01 Black
16 Gal. 18-1/2" 18-1/2" 12" 240-33 — JAZ400-116-03 JAZ602-025-06 Red
JAZ602-025-11 Blue

JAZ602-025-01

270 2023 - 2024 HOT ROD AND EARLY MUSCLE

Mid-Pipes for 1965-73 1965-73 Ford Mustang Cat4ward Shorty
Ford Mustang 289-302 Stainless Headers
Bolt-on replacement, stainless steel
JBA1650SH Cat4ward headers open up
Formed from durable stainless the exhaust for increased
steel, JBA mid-pipes have high-flow, performance without
mandrel-bent tubing with heavy- compromising the OEM emissions
duty flanges, OEM-style hangers, equipment. Extra-thick 3/8" CNC laser-
and oxygen sensor provisions. Available for use with JBA cut flanges ensure a tight seal and
full-length or Cat4ward headers. Mid-pipes are not emissions trouble-free performance without
legal and are for off-road use only. 2-1/2" H-Pipe. Use with leaks from warping. Each kit includes
JBA1650S headers. gaskets and hardware for installation.
Part No. Description
1965-73 Ford Mustang 289-302 Long Tube JBA1650S 289-302
Stainless Headers JBA1653S 351W

JBA6610S
Bolt-on replacement, 1-3/4” diameter
stainless steel Long Tube headers with
oversized exhaust ports offer increased
performance without compromising
the OEM emissions equipment. Extra-
thick, 3/8" CNC laser-cut flanges
ensure a tight seal and trouble-free
performance without leaks from warping. Gaskets and
installation hardware included.

Stage 2 Rochester Quadrajet

750 CFM 4-Barrel Carburetor
JET35002
Remanufactured carburetor offers
improved idle quality, instant throttle
Big Block Rochester Quadrajet response, maximum horsepower and torque
800 CFM 4-Barrel Carburetor for street/strip cars. Ideal with headers, ignition, and
JET36003 mild camshaft improvements.
Quadrajet 800 CFM carburetor is
specifically tuned for Chevrolet Stage 3 Rochester Quadrajet
396+ cubic inch big block engines. 750 CFM 4-Barrel Carburetor
Main well size is increased, circuit
modifications performed and a
JET35003
.149" needle and seat make this Suitable for street/strip vehicles,
carburetor perform well through remanufactured carburetor is fitted with
the entire RPM range. Works best oversized .149" needle and seat, enlarged
with a dual-plane intake, headers, 8.5-9.5:1 compression, and balanced main wells, and performance
and mild ported or aftermarket heads. Likes a camshaft calibration. Extensive circuit modifications
with at least 210° duration @ .050" lift with a max of 240° provide a superior fuel curve throughout entire RPM range.
degrees and lobe separation angle of 110-114°.
Divorced Choke Rochester
Quadrajet Rebuild Kits Quadrajet 750 CFM 4-Barrel Carburetors
Rebuild kits include complete needle and seat assembly, Quadrajet carburetors for 1966-78 applications with a
accelerator pump, fuel filter divorced choke. Available in either Stage 1 or Stage 2 units;
gasket, choke seals, body Stage 1 carburetors are direct replacement and are custom
and base gasket, air horn built to restore stock performance JET34001
gasket, carburetor to intake and reliability. Stage 2 units have idle,
gasket, and air cleaner main, accelerator pump, and high-
gasket. Rebuild kit is for speed circuits to take advantage of
35002, 35003, and any non- intake manifold, headers, ignition, and
electronic M4 Series Quadrajet. camshaft modifications.
Part No. Description Part No. Description
Kit for 35001, 35002, 35003, 35004, JET34001 1966-1973 Stage 1
JET201003
36002, & 36004 Carburetors JET34002 1966-1973 Stage 2
JET201004 Kit for 34001, 34002, 34003, 34005 & 36006 Carburetors JET34005 1974-1978 Stage 1

2023 - 2024 HOT ROD AND EARLY MUSCLE 271

No-Load Blinker Speed Flashers 40- and 80-Amp Relays
Convert to LED! No load flasher is great for LED Keep It Clean's heavy-duty relays are the best
tail lights! Plugs directly into all brands of fuse choice for any type of 12-volt wiring project.
panels. These flashers retain the reliability of a The single-pole/double-throw relay will never
552 flasher, stay extra cool, consume very little get stuck or short out on you.
power and have an extra-long life! Part No. Description
KICKICRA1000 40 Amp
Part No. Description
KICKICFF552NLF No Load Non-Adjustable Blink Speed Flasher
LED Bulbs
Billet Headlight Switch LED bulbs are the ideal choice
for any vehicle. The 19 individual
KICKICBSW1B001 LED bulbs surpass the industry
Billet headlight switch features a color accent ring standard 12 for ultimate brightness, color, and clarity.
around the knob and bezel. Each kit includes red, blue, Use with no-load blinker speed flasher.
black, and tan ring to match the interior. CAD CAM
Part No. Description
technology ensures a long life and smooth operation. Fits
KICKIC1157LEDA Super Bright Amber, 12V Bulb, Replaces Std. 1157
stock and after-market wire harnesses. KICKIC3157LEDA Super Bright Amber, 12V Bulb, Replaces Std. 3157

Ignition Switch with Coded Keys Switches

KICKICIGNSW
Each switch has four heavy-duty
copper terminals and four locking nuts
for ignition, accessory, battery, and
starter.

Floor-Mounted Dimmer Switch

KICKICDMRSW KICKICSW1 KICKICSW24Y KICKICSW25R KICKICSW30B

Keep It Clean’s unique, old-fashioned floor Part No. Description Part No. Description
mounting presents a smooth look and greatly simplifies Illuminated Aluminum Tip
installation. Zinc-plated switch is three-pin design. Power Window LED Toggle
KICKICSW1 Switch KICKICSW25R Red
All Aluminum Illuminated Rocker 4
Single Relay Socket LED Toggle KICKICSW30B Blue
KICKICRAS12 KICKICSW24Y Yellow
Heavy-duty relay sockets make
installation a snap! Simply plug in any standard 5-pin
relay. Adjustable Brake Light Switch
KICKICBLSW
GM-Style Headlight/Dimmer Switch Adjustable electric brake light
switch works with floor-mounted
KICKICEC1E6 pedals. Includes mounting bracket,
Kit includes floor-mounted hardware, and connectors.
dimmer switch, GM headlight
switch, 4-1/4" shaft for
headlight switch, ignition 12-Volt Power Port/Cigarette
switch with coded keys, wiper Lighter
switch, and two billet knobs. KICKICCIGLIGHT
Mounts on a flat surface.
12-Volt Heavy-Duty Flasher
KICKICFF552 Door Jam Wire Loom
No load, fixed pulse, FF552-style, 12-volt Hides and protects door wiring.
flasher. 2-pin. Ideal for power windows, stereo
installs, and shaved door kits.
Stainless Steel Line Clamps Sold in pairs.
Improve wires and tubing organization. Part No. Description
Set of 12. KICKICDLOOM Rubber, 7-1/4" Long, 1/2" Diameter
KICKICDLOOMBL Steel, 12" Long, 3/8" Diameter
Part No. Description
KICKICLC2500 1/2", Double
KICKICLC3187 3/16", Single
KICKICLC3250 1/4", Single
KICKICLC3375 3/8", Single
KICKICLC3500 1/2", Single

272 2023 - 2024 HOT ROD AND EARLY MUSCLE

Fused Wiring Dual-Port USB Charger
Harness Designed to replace the dash-mounted 12-volt power port
Each wiring kit includes with a dual-port USB charger. Offering both a 1-amp and a
a compact fuse block 2.1-amp charging port, it is ideal for charging multiple cell
along with color-coded phones while in the vehicle.
and labeled wire, and Part No. Description
detailed instructions. KICKICUSB01 Silver
KICKICUSB02 Black
Part No. Description
KICKICPROCOMP12B 12 Fuse
KICKICPROCOMP6 6 Fuse UltraWrap™ Ultra Wrap Wire Loom Variety Pack
KICKICPROCOMP8 8 Fuse Keep wires organized, protected, and looking great! Built
for strength and durability. UltraWrap wire looms are
Set of 3 12-Volt LED Dash Indicator Lights engineered to withstand underhood extremes. Braided
from 10-mil polyethylene terepthalate monofilament
KICKICSWIND2DASH yarns, they are resistant to chemicals, abrasion, UV
Includes two green turn signal radiation, and heat up to 400°F.
indicators and one blue high-beam
Part No. Description
indicator. Each light has an easy-to- KICKICWFABK0025L010 1/4" Diameter, 10 Feet, Wire Loom Only
install snap-In plastic bezel. Each light KICKICWFABK0125L010 1/8" Diameter, 10 Feet, Wire Loom Only
requires an 8mm diameter mounting
hole.

Koolmat Insulation
Koolsox Koolmat is a durable mat that eliminates heat build-up
Double-layer fiberglass socks protect in the driver compartment area by up to 75%. Koolmat
spark plug boots up to 1200°F and provide prevents burns, stops hot foot, and helps improve driver
an easy way to detect potential burn areas per­for­mance. Installs easily with pop rivets or weather
before they occur. The sock, rather than the plug stripping ad­he­sive. Just measure, cut, and rivet or glue to
boot, absorbs the burn and eliminates misfire. An the floor.
adjustable ring allows the sock to be rotated, increasing Part No. Size
its usable life. Fits straight or angled plug boots. KOO07031 30" x 12"
Part No. Description KOO07032 30" x 36"
Chevy (exc. 18° or LS1) / Ford, KOO07033 30" x 48"
KOO7500 KOO07061 30" x 96"
Universal Koolsox (1-1/2" x 5-1/2")

Dampers
KONI Special Dampers offer the best compromise between road handling and comfort. If only a Special damper is listed, it
may be adjusted for all driving requirements.
KONI Sport Dampers are intended for aggressive driving, or cars with suspension upgrades, but will still offer a comfortable
ride. If a KONI Sport is listed as an alternative to the KONI Special, choose the Sport for aggressive handling characteristics.
Sold in single units.
Note: Sport Shocks are identified by the suffix (Example, KON8040-1026 SPORT).
Year/Model Front Rear Year/Model Front Rear
Chevrolet Mopar
1989-92 Camaro KON8741-1030SPORT KON30-1265SPORT 1965-72 B-Body KON80-1538 —
1970-81 Camaro/Z-28 KON8040-1017 KON8040-1018 Oldsmobile
1977-96 Caprice, Impala SS 1968-77 Cutlass 4-4-2 KON8040-1087 KON8040-1088*
KON8040-1087 KON8040-1088*
Sedan And Wagon Pontiac
1968-77 Chevelle, 1970-81 Firebird KON8040-1017 KON8040-1018
KON8040-1087 KON8040-1088*
Malibu Sedans 1969 Firebird KON80-1914 —
1968-74 Chevy II, 1968 Firebird KON80-1914 KON80-1953
KON8040-1087 KON8040-1088*
Nova With Multi-Leaf Springs 1968-77 GTO, LeMans
1970-77 Monte Carlo KON8040-1087 KON8040-1088 KON8040-1087 KON8040-1088*
Except Wagon
Ford
* Remove bump rubber prior to adjusting.
1987-93 Mustang V8,
KON8741-1121SPORT —
Except Cobra R
1964-70 Mustang KON82-1388SP3 KON82-1389

2023 - 2024 HOT ROD AND EARLY MUSCLE 273

Shocks and Strut Assemblies
KYB's Gas-A-Just Shocks have higher gas pressure to keep tires glued to the road. High-strength
monotube configuration provides extra-rugged durability and fade-free performance. KYB's Excel-G Strut
Series' patented check valve minimizes foaming and aeration to make sure the ride stays smooth, even under
rough conditions.
Front Rear
Year/Model
Gas-A-Just Excel-GStrut Gas-A-Just Excel-GStrut
Buick
1984-87 Grand National KYBKG4513 — KYBKG5548 —
Chevrolet
1971-96 Impala, Caprice, Bel Air KYBKG4515 KYB343127 KYBKG5507 KYB343130
1970-81 Camaro, Z28, IROC KYBKG4515 KYB343128 KYBKG5526 —
1967 Camaro, Z28, IROC KYBKG4515 KYB343127 KYBKG5524 KYB343135
1993-02 Camaro, Z28, IROC KYBKG9310 — KYBKG5562 KYB343211
1982-92 Camaro, Z28, IROC — KYB236001 — KYB343211
1968-69 Camaro, Z28 With Multi-Leaf Spring KYBKG4515 KYB343127 KYBKG5521 KYB343135
1978-83 Chevelle, Malibu KYBKG4513 KYB343127 KYBKG5548 KYB343157
1968-72 Chevelle, Malibu KYBKG4513 KYB343127 KYBKG5504 KYB343157
1963-82 Corvette KYBKG4550 KYB343127 KYBKG5501 —
1989-96 Corvette (Exc. Adj. Susp.) KYBKG5570 — KYBKG5571 —
1988 Corvette — — KYBKG5571 —
1984-87 Corvette KYBKG4537 — KYBKG5564 —
1970-77 Monte Carlo, SS KYBKG4513 KYB343127 KYBKG5504 KYB343157
1978-88 Monte Carlo KYBKG4513 KYB343127 KYBKG5548 KYB343157
1968-73 Nova, Chevy II with H.D. Suspension KYBKG4515 KYB343127 KYBKG5504 KYB343157
1974-79 Nova KYBKG4515 KYB343127 — —
Dodge
1970-74 Challenger KYBKG4510 — KYBKG5512 —
1965-72 Charger, Coronet KYBKG4510 — KYBKG5512 —
1963-76 Dart, Demon KYBKG4509 — KYBKG5511 —
Ford
1964-70 Mustang/Shelby KYBKG4517 — KYBKG5517 —
Oldsmobile
1978-88 Cutlass (RWD) KYBKG4513 — KYBKG5548 —
Plymouth
1970-74 Barracuda KYBKG4510 — KYBKG5512 —
1962-72 Belvedere, GTX KYBKG4510 — KYBKG5512 —
1971-72 Road Runner KYBKG4510 — KYBKG5512 —
1968-70 Road Runner KYBKG4510 — KYBKG5512 —
Pontiac
1982-92 Firebird, Formula Trans Am — KYB236001 — KYB343211
1970-81 Firebird, FormulaTrans Am KYBKG4515 — KYBKG5526 —
1968-69 Firebird, FormulaTrans Am KYBKG4515 — KYBKG5521 —
1968-73 GTO KYBKG4513 — KYBKG5504 —
1964-67 GTO Exc. H.D. Suspension KYBKG4515 — KYBKG5507 —
1964-67 GTO With H.D. Suspension KYBKG4515 — KYBKG5504 —

274 2023 - 2024 HOT ROD AND EARLY MUSCLE

Street/Strip Traction Bars for Leaf Spring Cars
Traction bars increase traction by simply eliminating or reducing wheel hop, keeping more contact between the tire and the
road.
Part No. Description
Ford
LWI21602 1964-73 Mustang with 3" Diameter Axle Tubes
LWI21604 1964-73 Mustang with 2-3/4" Diameter Axle Tubes
LWI21604 1970-77 Maverick
Chevy
LWI21606* 1967-69 Camaro
LWI21607* 1970-81 Camaro
LWI21606
LWI21606* 1962-79 Nova LWI21602
LWI21606* 1955-57 Passenger
Buick
LWI21606* 1973-75 Apollo
Oldsmobile
LWI21606* 1973-78 Omega
Pontiac
LWI21606* 1967-69 Firebird
LWI21607* 1970-81 Firebird LWI20470
LWI21606* 1971-78 Ventura LWI20475
Universal Fit
LWI20470 Universal, Chrome-Plated, 28" Long
LWI20475 Universal, Yellow, 28" Long
* Not to be used with stabilizer bars or mono-leaf springs.

Driveshaft Safety LWI18000 Traction Bars for Coil Spring Cars

Loops Traction bars
LWI20188
Required and approved increase traction
by NHRA and IHRA, by eliminating or
drive shaft safety loops reducing wheel hop,
contain the driveshaft in promoting more
case of a U-joint failure. contact between the
tire and the road.
Part No. Description
LWI18020 1982-92 Camaro/Firebird, No Modifications Needed Part No. Description
Universal Fit, Adjustable to Fit Many Applications with Minor LWI20188 1964-77 GM A-Body Adjustable
LWI18000 LWI20189 1978-87 GM G-Body Adjustable
Modifications

Accessories for Traction Bars Rear Upper

LWI20570
and Lower
Control Arms
Heavy-duty control arms,
boxed or tubular, enhance performance
compared to factory stamped steel arms.
LWI20510 Part No. Description
Part No. Description GM
LWI20500 2° Wedge Kit for Narrow Ford and Mopar Perches LWI20140 1982-92 Camaro/Firebird Non-Adjustable Lower Arms
LWI20510 4° Wedge Kit for Narrow Ford and Mopar Perches
LWI20530 Large Rubber Snubbers for All Other Bars
Non-SFI Transmission Bellhousings
LWI20570 Replacement U-Bolt Kit for Leaf Spring Traction Bars
LWI20730 Large Urethane Snubbers for All Other Bars LWI77-150
Ideal for the street/strip or drag racers
running 11.50 ET or slower in the quarter
mile. These transmission adapters are
one-piece steel construction but are
not supplied with a block plate and are
not SFI-approved.
Description
Chevy 90° V6, Small Block Chevy (Non-LS) & Big Block Chevy, Block
Mounted Starter, Mechanical Clutch Linkage. Fits Transmissions: GM
Muncie & Saginaw, GM Borg Warner T-10 & GM Tremec TKO 500/600.

2023 - 2024 HOT ROD AND EARLY MUSCLE 275

 EZ-Adjust Dowel Pins
SF-Certified Safety Bellhousings EZ-Adjust dowel pins correct
Hydroformed 1/4" thick steel one-piece improper register bore like standard
bellhousings are tested to meet or exceed offset dowel pins, but can be rotated
SFI standards for anyone running 11.49 without having to pound them in and
ET or quicker. Housings are mandated by out of the engine block. Slip them
NHRA/IHRA and include block plate and into the engine block, rotate them
grade 8 hardware. with an end wrench until desired offset is found, then
securely tighten the set screw.
Part No. Description
Chevy 90° V6, SB Chevy (non-LS) & BB Chevy, Block Mounted Part No. Description
LWI15000 Starter, Mechanical Clutch Linkage. Fits Muncie & Saginaw, GM .621" Diameter
Borg Warner T-10 & Tremec TKO 500/600. LWI15907 0.007" Offset
1984-92 Camaro/Firebird, Chevy 90° V6, SB Chevy (non-LS) LWI15914 0.014" Offset
& BB Chevy, Block Mounted Starter, Hydraulic Clutch Slave
LWI15020 Cylinder, Drilled For 17° Canted T-5. Fits Borg Warner T5
(17°canted), Borg Warner T-10, Muncie & Saginaw, & Tremec
TKO 500/600.
Clutch Fork Boot
1965-77 Oldsmobile & Pontiac, all V8’s (Except Diesel), Starter LWI15510
LWI15100 Pocket Located on Driver’s Side. Fits Muncie/Saginaw, GM Borg Boot fits all Chevrolet Lakewood
Warner T-10 & Tremec TKO 500/600.
Ford 289-351C/W, All 6-Bolt Blocks. Fits Ford Top Loader, Borg
bellhousings and is made of soft pliable
LWI15200
Warner T-10 & Ford Tremec TKO500/600. rubber to keep dirt, dust, and moisture from
contaminating the clutch.
Early Transmission to Tremec TKO Interchange
Model Part No. Application Transmission Heavy-Duty Clutch Forks
TKO-500 TRETCET4616 GM GM Muncie/Saginaw/GM BW T-10 Clutch forks are heavy- gauge steel
TKO-600 TRETCET4617 Ford Ford Top Loader/Ford BW T-10 to prevent flex and are
TKO-600 TRETCET4618 GM GM Muncie/Saginaw/GM BW T-10
recommended when
TKO-600 TRETCET5008 Ford Ford Top Loader/Ford BW T-10
TKO-600 TRETCET5009 GM GM Muncie/Saginaw/GM BW T-10
installing a high-
performance or heavy-
duty clutch. Durable zinc dichromate finish helps resist
Standard Offset Dowel Pins rust and corrosion.
Offset dowel pins can be rotated as needed
Part No. Description
to correct improper register bore alignment 1973-81 GM Passenger Cars,
of bellhousing to crankshaft center line. LWI15500
Replaces OE Numbers 14066235 And 340278
These are a must for accurately dialing in LWI15535 1979-93 Ford Mustang, Diaphragm Style Clutch
bellhousings.
Adjustable Clutch Fork Pivot
Part No. Description Part No. Description
GM .625" Diameter Ford/Mopar .500" Diameter
Ball
LWI15930 0.014" Offset LWI15945 No Offset (Stock) Adjustable clutch fork pivot
LWI15940 0.021" Offset LWI15950 0.007" Offset ball adjusts release fork pivot
LWI15960 0.014" Offset height when installing a high-
LWI15970 0.021" Offset performance clutch and is
recommended for use with
Pilot Bearings Lakewood bellhousings.
Pilot bearings should always be replaced when changing
Part No. Description
a clutch. They smooth out shifting and reduce the chance LWI15501 Most GM Applications
of a missed shift. LWI15503 1979-02 Ford Mustang, 2.317" Long, 1/2"-13 Thread
Part No. Description LWI15504 1979-02 Ford Mustang, 2.645" Long, 1/2"-13 Thread
LWI15976 Bronze, Chevy V8
LWI15977 Roller, Chevy V8
LWI15976 LWI15977

276 2023 - 2024 HOT ROD AND EARLY MUSCLE

Billet Aluminum Horn Buttons Billet Aluminum Steering
Machined from billet and polished to a Wheel Adapters
brilliant shine, these horn buttons fit Easily install Lecarra steering
Lecarra Vette 6-bolt steering wheels. wheels on OE columns with
Each. these billet aluminum adapters.
Part No. Description Available with 6- or 9-bolt
LEC3630 Horn Button, Polished, No Logo mounting, and in black anodized
LEC3631 Horn Button, Polished, Lecarra Logo or polished finishes, they include
a horn button wire and mounting
hardware.
Specialty Steering Wheels
Part No. Mount Vehicle Finish
Offered in a number of styles to
OE Column 1992-99 Ford Full-Size
fit virtually any style interior from LECB-12411 9
Truck/SUV
Black
classic to nostalgic to modern, OE Column 1978-91 Ford Full-Size
Lecarra steering wheels are LECB-12412 9 Black
Truck/SUV
made in the USA with premium LECB-16400 9 OE Column 1961-80 International Scout Black
materials such as billet aluminum LECB-16402 9 OE Column 1949-66 GM Black
or stainless steel, and wrapped in LECB-16422 9
OE Column 1954-66 GM Full-Size
Black
luxurious leather. Truck/SUV
OE Column 1992-99 Ford Full-Size
Part No. Description Dia. Dish Mount LECB-22411 9 Polished
Truck/SUV
Billet Aluminum Steering Wheels OE Column 1978-91 Ford Full-Size
Mark 4 Standard, 3-Spoke, Polished. LECB-22412 9 Polished
LEC41201 14" 1-1/2" 9 Truck/SUV
Black Grip LECB-26400 9 OE Column 1961-80 International Scout Polished
Trans-Am, 3-Spoke, Polished, Black LECB-26402 9 OE Column 1949-66 GM Polished
LEC61501 14" Flat 6
Wrap OE Column 1954-66 GM Full-Size
Trans-Am, 3-Spoke, Clear Anodized, LECB-26422 9 Polished
LEC62312 14" Flat 6 Truck/SUV
Red Wrap Vette 3 3-Spoke to OE Column 1967-
Mark 9 Standard, 4-Spoke, Polished, LECB-26457 6 Polished
LEC91201 14" 1-1/2" 9 94 GM
Black Grip LECB-26458 6 2-Spoke to OE Column 1967-94 GM Polished
LEC92201 Mark 9 GT, 4-Spoke, Polished, Black Grip 14" 1-1/2" 9 OE Column 1948-57 Ford Full-SIze
Mark 9 Supreme, 4-Spoke, Polished, LECBA-22455 9 Polished
LEC94301 14" 1-1/2" 9 Truck
Black Grip
Stainless Steel Steering Wheels
LEC63201 Vette 3, 3-Spoke, Polished, Black Grip 14" 1-1/2" 6
Two Smooth, 2-Spoke, Polished, Black
LEC63401 14" 1-1/2" 6
Grip
LEC63501 SS, 2-Spoke, Polished, Black Grip 14" 1-1/2" 6
LEC63601 Hot Rod, 3-Spoke, Black Grip 14" 1-1/2" 6
Two Smooth, 2-Spoke, Polished, Black
LEC66601 15" 1-1/2" 6
Grip
LEC66701 SS, 2-Spoke, Polished, Black Grip 15" 1-1/2" 6
LEC66801 Hot Rod, 3-Spoke, Polished, Black Grip 15" 1-1/2" 6

Bandit Series Electric Vacuum Pump

Bandit series vacuum pump provides an efficient, quiet,
and vibration-free solution for vacuum-assist braking
requirements. Rotary vane-style pump is up to 60%
quieter than traditional “piston-style" pumps, while also
being up to 30% more efficient, ultimately improving
safety and drivability. Pumps are offered concealed with
black or chrome ABS plastic housings, or as the Naked
Bandit, which lacks a container and allows mounting the
unit into the tightest of locations. Pump includes a two-
wire power hook-up and integrated mounting plate to
provide simplified installation.
Part No. Description LEEVP001B LEEVP002
LEEVP001C
LEEVP001B Black Bandit
LEEVP001C Chrome Bandit
LEEVP002 Naked Bandit

2023 - 2024 HOT ROD AND EARLY MUSCLE 277

Brake Proportioning Valves Brake Pressure Gauge Kit
LEEBPG001
Often required in the diagnosis
of brake systems, pressure
gauge kit attaches directly
to the caliper or wheel
LEEPV2C
LEEPV2-B cylinder and then used
to determine proper
Valves are precision engineered to properly meter disc/ master cylinder bore
drum-equipped vehicles to ensure proper braking, while size, master cylinder and
preventing nose diving or rear wheel lock-up in panic stop power booster function,
situations. Available disc/disc proportioning valve allows proportioning valve
maximum braking pressure to all four calipers. Offered in function, front to rear
brass or chrome. brake bias, and much
more. Kit is sold complete with a variety of popular brake
Part No. Description fitting adapters, instructions, and solutions guide.
LEEPV2-B Disc/Drum, Brass
LEEPV4-B Disc/Disc, Brass

Adjustable Proportioning Valves Brake Line Fittings & Kit

LEEFKPV

LEEFT3824316 LEEFT71624316 LEEFT1220316

LEEAPV02

LEEPVC-B LEEFT9161814 LEEFT91618316

Similar to the above units, but allowing precise Universal brake line kit includes many of the correct
adjustment to rear wheel braking, improving safety and fittings to flare onto your brake lines for most
drivability. Proportioning valve/combo block includes aftermarket five-port brass and aluminum proportioning
the addition of a hydraulic switch that may be used to valves, eliminating the need to add complex adapters to
activate the taillights. the brake system. Kit includes (2) 3/8”-24 for 3/16” line, (1)
Part No. Description 9/16”-18 for ¼” line, (1) 7/16”-24 for 3/16” line and (1) ½”-2 for
LEEAPV02 Adjustable Proportioning Valve 3/16” line. A variety of individual fittings and adapters may
LEEPVC-B Adjustable Proportioning Valve/Combo Block also be purchased separately.
Part No. Description
Individual Fittings:
Universal Pushrod Kit LEEFT3824316 3/8-24 for 3/16" line
LEEFT71624316 7/16-24 for 3/16" line
LEEPRE113 LEEFT9161814 9/16-18 for 1/4" line
LEEPL3824

LEEFT91618316 9/16-18 for 3/16" line

Individual Adapters:
LEEPL3824 3/8-24 Plug
LEEFT7828 3/8 Male to 7/16 Female
LEEFT7909 1/2 Male to 3/8 Female LEEFT7828

Build more than 10 different common pushrod

combinations to work with virtually any brake pedal and
power brake booster or master cylinder and achieve the LEEFT7909
optimal pedal height. The included 3/8"-24 threaded
coupler allows connection to most aftermarket power
brake boosters, and the bullet-style male end works with
most manual master cylinders.

278 2023 - 2024 HOT ROD AND EARLY MUSCLE

Power Brake Booster/Master Cylinder Kits with Dual Integral Reservoirs
Upgrade manual brake systems to power, or upgrade an existing power brake system with LEED Brakes power brake
booster/dual reservoir master cylinder kits. Each kit is pre-assembled to ensure ease of installation and top quality. Kits
are available in 7", 8", and 9" sizes with single- or dual-diaphragm styles and include a master cylinder with dual integral
reservoirs.
LEE1K1 LEEH61A3

Application Part No. Bore Diameter Diaphragm Valving Finish

GM Applications
GM 64-74 A/X 67-69 F-Body LEE1E1A1 1-1/8" 9" Single Disc/Drum Zinc
GM 64-74 A/X 67-69 F-Body LEE1E1A3 1-1/8" 9" Single Disc/Disc Zinc
GM 64-74 A/X 67-69 F-Body LEE1K1 1-1/8" 7" Dual Disc/Drum or Disc/Disc Zinc
GM 64-74 A/X 67-69 F-Body LEE1K105 1-1/8" 7" Dual Adjustable Zinc
GM 64-74 M A/X 67-69 F-Body LEE1K1A1 1-1/8" 7" Dual Disc/Drum Zinc
GM 64-74 A/X 67-69 F-Body LEE2L6B4 1-1/8" 7" Dual Disc/Disc Chrome
GM 60-66 Truck LEE3Q1 1-1/8" 9" Single Disc/Drum Zinc
GM 60-66 Truck LEE3Q1A1 1-1/8" 9" Single Disc/Drum Zinc
GM 60-66 Truck LEE3S105 1-1/8" 7" Dual Disc/Drum or Disc/Disc Zinc
GM 60-66 Truck LEE3S1A1 1-1/8" 7" Dual Disc/Drum Zinc
GM 60-66 Truck* LEE4R6 1-1/8" 9" Single Disc/Drum or Disc/Disc Chrome
GM 60-66 Truck* LEE4R6B4 1-1/8" 9" Single Disc/Disc Chrome
GM 67-72 Truck LEE761 1-1/8" 7" Dual Disc/Drum or Disc/Disc Zinc
GM 67-72 Truck LEE761A3 1-1/8" 7" Dual Disc/Disc Zinc
GM 67-72 Truck* LEE796 1-1/8" 8" Dual Disc/Drum or Disc/Disc Chrome
GM 67-72 Truck* LEE796B4 1-1/8" 8" Dual Disc/Disc Chrome
GM 67-72 Truck/SUV LEEH61A3 1-1/8" 7" Dual Disc/Disc Zinc
GM 67-72 Truck/SUV LEEH76B2 1-1/8" 7" Dual Disc/Drum Zinc
Ford Applications
Ford 641/2-66 Mustang LEE5H8 1" 7" Single Drum/Drum Zinc
Ford 66-77 Bronco LEEB83 1" 8" Dual Disc/Drum or Disc/Disc Zinc
Ford 57-59 F Series, 60-72 F100 LEEE61 1-1/8" 7" Dual Disc/Drum or Disc/Disc Zinc
Ford 57-59 F Series, 60-72 F100 LEEE63A3 1" 7" Dual Drum/Drum Zinc
Ford 57-59 F Series, 60-72 F100* LEEE96B2 1-1/8" 8" Dual Disc/Drum Chrome
Ford 57-59 F Series, 60-72 F100* LEEE96B4 1" 8" Dual Disc/Disc Chrome
Ford 61-72 Galaxie LEEG81A1 1-1/8" 8" Dual Disc/Drum or Disc/Disc Zinc
Ford 61-72 Galaxie LEEG83 1" 8" Dual Disc/Drum or Disc/Disc Zinc
Mopar/Jeep Applications
Mopar 62-74 A, 62-64 C, 70-74 E- Body LEEA84 1" 8" Dual Disc/Drum or Disc/Disc Zinc
Mopar 62-74 A, 62-64 C, 70-74 E- Body LEEA96 1-1/8" 8" Dual Disc/Drum or Disc/Disc Zinc
Jeep 76-86 CJ LEEC83 1" 8" Dual Disc/Drum or Disc/Disc Zinc
Jeep 76-86 CJ LEEC83A1 1" 8" Dual Disc/Disc Zinc
Jeep 76-86 CJ* LEEC9FB2 1" 8" Dual Disc/Drum Chrome
* Flat-top Master Cylinder.

Power Brake Boosters

Upgrade manual brake systems to power, or upgrade an existing power brake system with
LEED Brakes power brake boosters. Boosters are available in 7", 8", and 9" sizes with single- or
dual-diaphragm styles. Brackets included.

Application Part No. Diameter Diapragm Finish

Ford 641/2-66 Mustang LEE6J 7" Single Zinc
GM 67-72 Truck/SUV LEE79 8" Dual Zinc
Ford 61-72 Galaxie LEEG8 8" Dual Zinc

2023 - 2024 HOT ROD AND EARLY MUSCLE 279

Ford Front Disc Brake Conversion Kits To upgrade to MaxGrip XDS cross-
drilled rotors, add an “X” to the end
LEED Brakes complete front disc brake conversion kits include of any part number.
everything needed for easy installation. Ford front disc brake kits use
Upgrade to red (R) or black (B)
an OEM-style 4-piston caliper with a zinc-plated finish and stainless powder-coated calipers by adding
steel pistons. All kits will fit 14” and larger styled steel wheels. Factory “R” or “B” to the beginning of any
14”x5” drum brake wheels will not clear. part number ending with “X”.
19641/2-73 Mustang, Falcon, Cougar, Comet, Cyclone
Part No. Description Applications Notes
LEEFC0001-405 Manual Front Brake kit 1964-66 Mustang, Falcon, Fairlane, Ranchero, Mercury Comet, Cyclone ­—
LEEFC0001-H405A Power Front Brake Kit 1964-66 Mustang Only 1
LEEFC0001-H405ALK Power Brake kit w/line kit 1964-66 Mustang Only - Kit Includes Brake Lines for Entire Vehicle 1
LEEFC0002-405 Manual Front Brake Kit 1967-69 Mustang, Fairlane, Torino, Ranchero, Comet, Cyclone, Cougar —
LEEFC0002-3405A Power Front Brake Kit 1967-69 Mustang, Mercury Cougar 2
LEEFC0002-X405M Power Front Brake Kit 1967-69 Mustang, Mercury Cougar 3

1957-68 Ford Full Size Cars such as Galaxie, Fairlane, Cyclone, Sunliner, Custom, Edsel, eTC.
Part No. Description Applications
1957 Ford Custom - 1957-1958 Ford Del Rio Wagon - 1957-1959 Ford Ranchero, Skyliner - 1957-1960 Ford
LEEFC0025-405 Manual Brake Kit Courier Sedan Delivery, Custom 300, Sunliner, Victoria - 1957-1961 Ford Fairlane - 1957-1968 Ford Country
Sedan, Squire, Ranch Wagon - 1958-1960 Ford Thunderbird -1959 Edsel Corsair, Villager -1959-1960 Edsel
Ranger, Villager - 1959-1968 Ford Galaxie, Galaxie 500 - 1960 Ford Starliner - 1961 Mercury Meteor - 1961-
Brake Kit for Factory Power 1968 Mercury Colony Park, Commuter, Monterey - 1962-1967 Mercury Villager - 1963 Ford 300 - 1963 Mercury
LEEFC0025-405P Brake Cars - Country Cruiser -1963-1968 Mercury Marauder - 1964-1966 Mercury Cyclone - 1964-1968 Ford Custom, Custom
Uses tock Power Booster 500, LTD, Mercury Montclair, Park Lane - 1966-1967 Mercury Voyager - 1967 Mercury Brougham - 1967-1968
Mercury Marquis

Power Brake Kit - for NON 1957 Ford Custom - 1957-1958 Ford Del Rio Wagon - 1957-1959 Ford Ranchero 1957-1959 Ford Skyliner - 1957-
LEEFC0025-8307
Y-Block Cars 1960 Ford Courier Sedan Delivery - 1957-1960 Ford Custom 300 - 1957-1960 Ford Victoria - 1957-1961 Ford
Fairlane - 1957-1962 Ford Country Squire - 1957-1968 Ford Country Sedan - 1957-1968 Ford Ranch Wagon
- 1958-1960 Ford Sunliner -1959 -1960 Edsel Ranger -1959-1967 Ford Galaxie - 1960 Edsel Villager - 1960 Ford
Starliner - 1961 Meteor - 1961-1968 Colony Park - 1961-1968 Commuter - 1961-1968 Monterey - 1962-1967 Villager
Power Brake Kit for Y Block
LEEFC0025-Y307 - 1962-68 Ford Galaxie 500 - 1963 Ford 300 - 1963 Country Cruiser - 1963-1968 Ford Country Squire - 1963-1968
Cars
Marauder - 1964-1968 Ford Custom - 1964-1968 Ford Custom 500 - 1964-1968 Montclair - 1964-1968 Park

Notes: 1. Automatic Transmission Cars Only - Manual Transmission if using aftermarket cable style clutch. 2. Automatic Transmission Only 3. Manual Transmission Only
Ford Rear Disc Brake Kits
A great addition to Ford 8” or 9” rear axles, LEED Brakes bolt-on kits include an 11” rotor and a large 54mm single-piston rear
caliper with built-in parking brake. The precision CNC-machined mounting bracket has multiple mounting holes to allow the
caliper to be positioned as desired. This provides the ability to add aftermarket suspension components without interfering
with the brake system.
Part No. Description
LEERC0001 8" & 9" Small Bearing Kit To upgrade to MaxGrip XDS cross-drilled rotors, add an “X” to the end of any part
number.
LEERC0002 9" Large Bearing Kit
*Always confirm your axle type before ordering. Upgrade to red (R) or black (B) powder-coated calipers by adding “R” or “B” to the
beginning of any part number ending with “X”.

Ford Power Brake Boosters & Master Cylinder

Power Hydraulic Kits Power Brake Boosters
LEED Brakes power hydraulic kits are designed for easy Part No. Description
installation. Many include pre-bent brake lines and a LEEPB0013 67-70 Mustang/Manual Tran
proportioning valve for great braking performance with LEEPB0012 71-73 Mustang
minimal installation effort.
Part No. Description
LEEFC0002HK 65-66 Mustang Auto Trans. Only
LEE5H473 65-66 Mustang Auto Trans 4 wheel disc
LEEFC0004HK 67-70 Mustang/Cougar Auto Trans. Only
LEEFC0008HK 67-70 Mustang/Cougar Manual Trans. Only
LEEFC0024HK 57-68 Ford Full-Size - non Y Block

Manual Hydraulic Kits

Part No. Description
LEEFC0001 HK 65-66 Mustang/Falcon
LEEFC0025HK 67-68 Full Size Ford
LEEFC0045HK 57-68 Ford Full-Size Cars

280 2023 - 2024 HOT ROD AND EARLY MUSCLE

Ford Mustang Master Cylinder and Brake Booster Kits
Upgrade manual brake systems to power, or upgrade an existing power brake
system with LEED Brakes master cylinders and power brake booster kits. Each
kit is pre-assembled to ensure ease of installation and top quality. Some kits may
include additional accessories such as pre-bent brake lines, pedal-rod extension,
and proportioning valves.

Application Part No. Bore Diameter Diaphragm Valving Finish

Ford 641/2-66 Mustang LEE5H4 A 1" 7" Single Disc/Drum or Disc/Disc Zinc
Ford 641/2-66 Mustang - Master Cylinder Only LEEFC0001HK 1" N/A N/A Disc/Disc Zinc
Ford 641/2-66 Mustang LEEFC0002HK A 1" 7" Single Disc/Drum or Disc/Disc Zinc
Ford 641/2-66 Mustang - Master Cylinder Only LEEFC0006HK 1" N/A N/A Disc/Drum Zinc
Ford 641/2-66 Mustang LEEFC0007HKA 1" 7" Single Disc/Drum or Disc/Disc Zinc
Ford 67-72 Mustang - Master Cylinder Only LEEMC004 1" N/A N/A Disc/Drum or Disc/Disc Zinc
Ford 67-70 Mustang LEE034 C 1" 9" Single Disc/Drum or Disc/Disc Zinc
Ford 67-70 Mustang LEE034PA D 1" 9" Single Disc/Drum or Disc/Disc Zinc
Ford 67-70 Mustang LEEFC0019HK C 1" 8" Dual Disc/Drum or Disc/Disc Black
Ford 67-70 Mustang LEEFC0022HK 1" 8" Dual Disc/Drum or Disc/Disc Black
Ford 71-73 Mustang LEEFC0018HK 1" 7" Single Disc/Drum or Disc/Disc Zinc
Ford 641/2-66 Mustang LEEFC0035HK 1" 7" Single Drum/Drum Zinc
Ford 641/2-66 Mustang LEEFC0042HK B 1" 8" Dual Disc/Drum or Disc/Disc Zinc

NOTES:

A Auto Transmission Only

B Factory manual transmission w/ "Z Bar" linkage

C Power Brake Pedal Required

D Auto. Transmission Brake Pedal Included

E Manual Transmission Only, Brake Pedal Included

Front Disc Brake Kit for 1966-75 Ford Bronco

LEEFC5001-405
LEED Brakes makes this high-performance disc brake kit to give
an early Ford Bronco the stopping power it needs! With quality
2-piston calipers, this kit works with stock or aftermarket locking
hubs to provide great braking performance at an affordable price.
Recommended front wheel size is 15” or larger.
Kits include:
• 2-piston zinc-plated cast-iron calipers
• 12” rotors
• Zinc-plated caliper mounting brackets
• Grade 8 mounting hardware
• Brake hoses
• Master cylinder
• Brake lines
• Adjustable proportioning valve
• All necessary hardware

Power Booster Brackets for GM 1964-72

A/X Body, 1967-69 F-Body
LEEAFX6472-C
Made of chrome-plated stamped steel. Sold as pair.

2023 - 2024 HOT ROD AND EARLY MUSCLE 281

GM Front Disc Brake Conversion Kits
(A-Body, F-Body, X-Body)
Give GM muscle cars the stopping power of disc brakes! LEED Brakes disc
brake kits provide optimal stopping power at an affordable price, with top-
shelf components that undergo rigorous quality checks. Designed to fit
most 14”x7” or larger disc brake wheels, kits include:
• Single-piston, zinc-plated 72mm • Zinc-plated caliper mounting • Top-quality bearings and seals
calipers. brackets • Bearing retainer and grease caps
• 11” vented rotors • Grade 8 mounting hardware • Hydraulic solution as listed in the
• Zinc-plated rotor splash shields • Semi-metallic brake pads chart

7" Dual Power 9" Power Disc/ 8" Dual Power

Spindle Mount Disc/Disc Drum Disc/Drum
Stock Height LEEFC1002SM LEEFC1002-K1A3 LEEFC1002-E1A1 LEEFC1002-M1A1

8" Dual Power

Adjustable
Chrome LEEFC1003-N605

Upgrade to MaxGrip XDS cross-drilled rotors, add an "X" to the end of any part number, for example LEFC1002SMX.
Powdercoat your calipers red (R) or black (B) by adding an "R" or "B" at the begining of any part number that ends with "X"

GM Rear Disc Brake Kits

These complete bolt-on drum-to-disc conversion kits make it easy to add disc
brakes to GM 10-bolt and 12-bolt rear axles. A large 63.5mm single-piston rear
caliper with built-in parking brake provides plenty of clamping force. Designed
to fit most 15” and larger wheels, kits include:
• Single 63.5mm zinc-plated piston calipers with parking brake
• 11.25” vented brake rotors
• Zinc-plated brake rotor dust shields
• Zinc-plated caliper brackets
• D.O.T-approved flex hoses
• Grade 8 mounting hardware
• Parking brake provisions (by application)
Part No. Application Description
LEERC1001 67 Camaro/Firebird & 64-77 Chevelle, A-Body Rear Disc Brake Kit - Non Staggered Shocks
LEERC1007 55-68 GM Full-Size Cars/B-Body
LEERC1009 82-92 Camaro/Firebird Rear Disc Brake Kit - 3 Bolt Axle Flange
To upgrade to MaxGrip XDS cross-drilled rotors, add an “X” to the end of any part number, for example, LEERC1001X
Powdercoat your calipers red (R) or black (B) by adding an "R" or "B" at the begining of any part number that ends with "X"

GM Power Brake Booster Kits

Upgrade manual brake systems to power, or upgrade an existing power brake system with LEED Brakes power brake booster
kits. Each kit is pre-assembled to ensure ease of installation and top quality. Kits are available in 8” dual-diaphragm models
(listed in chart), as well as in 7” dual-diaphragm and 9” single-diaphragm styles.

With
Application Booster Only Booster I Master Adjustable Valve With Disc/Drum Valve With Disc/Disc Valve
LEE3K105
64-74 GM A/X 67-69 F Body LEE1M — — —
LEEPBKT1034*
7" Chrome LEE4L — — — —
55-68 GM Bel Air, Impala LEE3M LEE3M1 — LEE3M1A1 —
67-72 GM Truck — — — LEEH81A1 —
LEE2N6B2 LEE2N6B4
8" Chrome — — —
LEEH96B2** LEEH96B4**
* Non-adjustable
** Compact Style

282 2023 - 2024 HOT ROD AND EARLY MUSCLE

GM Front Disc Brake Conversion Kits
(Full-Size Impala or Bel Air)
Upgrade classic full-size GM cars with the stopping power of disc
brakes! LEED Brakes disc brake kits provide optimal stopping power at
an affordable price, with top-shelf components that undergo rigorous
quality checks. Designed to fit most 14”x7” or larger disc brake wheels,
kits include:
• Single-piston, zinc-plated 72mm calipers.
• 11” vented rotors
• Zinc-plated rotor splash shields
• Zinc-plated caliper mounting brackets
• Grade 8 mounting hardware
• Semi-metallic brake pads
• Top-quality bearings and seals
• Bearing retainer and grease caps
• Hydraulic solution as listed in the chart
7" Dual 7" Dual Power
Year Power Adj. Disc/Disc
1955-58 LEEFC1010-K105 —
1959-64 LEEFC1011-K105 LEEFC1011-K1A3

Upgrade to MaxGrip XDS cross-drilled rotors, add an "X" to the end of any part number, for example LEFC1002SMX.
Powdercoat your calipers red (R) or black (B) by adding an "R" or "B" at the begining of any part number that ends with "X"

Leed 7" Dual Power Booster and 1-1/8" Bore Master Cylinder Combo is a factory-style
replacement system for disc/drum brake applications, complete with proportioning valve.
Top-quality power brake booster is designed to mount directly to the car's firewall.

2023 - 2024 HOT ROD AND EARLY MUSCLE 283

Mopar Front Disc Brake Kits 1962-72 B-Body Dodge & Plymouth
Why deal with older drum brakes when LEED
Part No. Description
Brakes makes high-performance disc brake
LEEFC2002-8405 Power Front Disc Brake Kit
kits that give Mopar cars the stopping power
they deserve? With quality 4-piston calipers, Power Front Disc Brake kit
these kits provide great braking performance
Part No. Description
at an affordable price. Designed to fit most LEEFC2003-C05 Manual Front Disc Brake Kit
factory 14” or 15” drum brake wheels, kits LEEFC2003-8405 Power Front Disc Brake kit
include: * A-Body kits only fit 10" Drum Brake Spindles and include large 5 x
• 4-piston zinc-plated cast-iron calipers with 4.5" bolt pattern
stainless pistons
• 11” rotors
• Zinc-plated caliper mounting brackets
• Grade 8 mounting hardware
• Brake hoses
• Top-quality wheel bearings and seals
• Master cylinder
• Brake lines
• Power booster (where applicable)
• Adjustable proportioning valve
• All necessary hardware
To upgrade to MaxGrip XDS cross-drilled rotors, add an “X” to the end of any part number., for example LEEFC2002-8405X
Upgrade to red (R) or black (B) powder-coated calipers by adding “R” or “B” to the beginning of any part number ending with “X”.
1965-72 A Body Dodge & PlyMouth
Mopar Rear Disc Brake Kits Part No. Description
These complete bolt-on drum-to-disc LEERC2001 8-3/4 & 9-3/4 Rear Disc Brake Kit
conversion kits greatly improve stopping LEERC4001 8-1/4 & 9-1/4 Rear Disc Brake Kit
power and overall braking performance.
Designed for easy installation, kits
include:
• Single-piston zinc-plated calipers with
parking brake
• 11.25” vented brake rotors
• Zinc-plated brake rotor dust shields
• Precision-machined, zinc-plated
caliper brackets
• Brake hoses
• Weld-on brake hose tab
• Mounting hardware
To upgrade to MaxGrip XDS cross-drilled rotors, add an “X” to the end of any part number.
Upgrade to red (R) or black (B) powder-coated calipers by adding “R” or “B” to the beginning of any part number ending with “X”.

Mopar Power Brake Booster Kits

LEED Brakes offers a complete line of master cylinders, power brake boosters, and hydraulic kits for 1964-74 Mopar vehicles,
all designed to provide the look and feel of factory-equipped power brakes.
Easy bolt-on kits make converting from manual to power brakes a snap, using the existing 4-bolt mounting pattern on the
firewall. A pushrod passes through the existing pushrod hole to connect the factory brake pedal, with no modifications
needed. For vehicles with existing power brakes, some modifications may be required to ensure proper fit.

Description With Disc/Disc Valve

1" Bore - 8" Dual Diaphragm LEEA8473

Description Booster Only With Adjustable Valve

1" Bore - 8" Dual Diaphragm LEEA9 LEEA9F05

284 2023 - 2024 HOT ROD AND EARLY MUSCLE

Lightweight Racing Batteries
Lightweight, maintenance-free Valve Regulated Sealed Lead Acid Battery (VRSLAB) was
originally developed for military aircraft where weight, power, and safety are priorities. May
be mounted in any position and will not leak, even if the case is damaged.
Reserve
Part No. CCA Dimensions
Capacity
LFBLL-1236TB 36 Mins. 385 7.71"L x 5.18"W x 6.89"H
LFBLL-1257TB 57 Mins. 495 9.78"L x 4.97"W x 6.38"H

Quick Paint Cleaning System Kit Glazing Polish

LIQ10201 LIQ20101
A unique, easy-to-use Liquid Glow Glazing Polish combines both
3-step system that glaze and polish into one easy-to-use product.
effortlessly cleans paint, This car polish is also a swirl-removing glaze
glass, and chrome. Easily that is safe for all vehicles, non-abrasive, and
removes dull oxidized paint, won’t harm paint. Designed to be easy to use
water spots, tree sap, bugs, for the non-professional, but with results that
and other contaminants would make any pro detailer happy. Liquid Glow
leaving behind perfectly Glazing Polish will give your paint a deep, liquid glow and
clean, smooth paint. Better mirror-like depth that makes it look better than it did
than clay bars. Kit contains brand new. 16-oz. squeeze bottle.
Quick paint cleaning bar, Quick detailer and spray wax,
and microfiber cloth. Sealant Wax
LIQ30101
Wheel Cleaner Sealant Wax combines the best qualities of
LIQ10202 both carnauba wax and a synthetic polymer
Manufactured with a non-acid formula that is sealant. This combination produces the
tough on dirt but gentle on wheels. When used long-lasting durability and hard shine of
as directed, Liquid Glow Wheel Cleaner busts synthetic polymer sealant with the amazing
through brake dust and rinses away clean, depth and glow of genuine carnauba wax.
leaving wheels sparkling clean. Safe for all 16-oz. squeeze bottle. Sold each. Made
wheel types including painted, clear coated, in USA.
powder coated, steel, modular, or chrome
22-oz. spray bottle. Sold each. Quick Detailer and Spray Wax
with Genuine Carnauba
Car Wash with Carnauba Wax
LIQ30202
LIQ10302 Quick Detailer is the fastest and easiest
This liquid car soap is extremely gentle way to clean paint while waxing it too.
on a vehicle’s paint, yet tough on dirt Manufactured with a premium-grade Brazilian
and grime. Ordinary soap can strip away carnauba wax that provides a deep, rich wet
wax and actually harm the paint surface. looking shine. Can even be applied in direct
Liquid Glow Car Wash with Carnauba Wax sunlight without any fear of streaking or
is designed just for vehicles, with a pH- hazing. 22-oz. spray bottle. Sold each.
balanced formula that is biodegradable Made in USA.
and high suds that suspend dirt away
from the paint. Not only is this soap gentle
and cleansing, it also contains genuine
carnauba wax to replenish the vehicles
existing coat of wax. 64-oz. bottle. Sold each.

2023 - 2024 HOT ROD AND EARLY MUSCLE 285

Sound Control Formula Coating Ceramic Insulation Coating
Water-based Lizard Skin SC reduces noise Water-based, environmentally friendly
and can protect surfaces from moisture and spray-on insulation is Class A fire rated
corrosion. Capable of withstanding 300°F and and can cover hard-to-reach areas like
Class A fire rated, SC is ideal for firewalls, floor inner fender and door panels. Two-gallon
pans, transmission tunnels, etc. A two-gallon container covers 45-50 square feet at a thickness of
container covers approximately 100 square .040". Once it's in place, Lizard Skin can withstand 500°F,
feet at .020" thickness. Should be applied with reduce road noise by 10-12 decibels, and protect surfaces
Lizard Skin Spray Gun Kit. from moisture and corrosion. Should be applied with
Part No. Description Lizard Skin spray gun kit for best results.
LIZ50111 1-Gallon Pail Part No. Description
LIZ50115 2-Gallon Pail LIZ50100 Black Ceramic Insulation Coating, 2-Gallon Pail
LIZ50101 White Ceramic Insulation Coating, 2-Gallon Pail
LIZ50105 Black Ceramic Insulation Coating, 1-Gallon Pail
LIZ50106 White Ceramic Insulation Coating, 1-Gallon Pail

Super Pro Application Kit TopCoat

LIZ50125 This spray-on coating provides a textured, non-
A professional-quality, siphon-feed spray gun that can skid, glossy finish that improves the durabuilt
handle the high density and viscosity of Lizard Skin. Kit and appearance of any Lizard Skin project.
includes extra nozzles, one stir paddle for electric drill, Black only.
two hose clamps, and one threaded hose barb. 15-oz. Aerosol Can Case(6) 15-oz. Aerosol Can
LIZ3010.1 LIZ3010.6

Medium-Strength High-Strength
Blue Threadlocker 242 Red Threadlocker 262
All-purpose medium-strength blue Permanent, high-strength threadlocker is
threadlocker is well suited to bolt and compatible with fasteners up to 3/4" prior
nut applications from 1/4" to 3/4". Locks to assembly. Secures parts that must
threads and seals, while preventing endure heavy shock, vibration, or extreme
parts from loosening due to vibration. chemical conditions. Localized heating
Disassembly may be performed using may be required to separate parts.
hand tools. Part No. Description
Part No. Description LOC487231 Threadlocker 262, 6 ml Tube
LOC487229 Threadlocker 242, 6 ml Tube LOC492141 Threadlocker 262, 36 ml Bottle
LOC492140 Threadlocker 242, 36 ml Bottle
Heavy-Duty Red Threadlocker 271
Surface Insensitive/Medium- Red Threadlocker 271 is engineered
Strength Threadlocker 243 for heavy-duty fasteners up to 1",
General-purpose, medium-strength adding 3,000 PSI of holding power to
blue threadlocker features improved oil slip or press-fit components. Prevents
tolerance, making it ideal for use with loosening due to vibration, while
rocker studs, rocker adjuster nuts, etc. eliminating the need for set screws and
Designed for fasteners from 1/4" to 3/4". snap rings. Localized heating may be
Disassembly may be performed using required to separate parts.
hand tools. Part No. Description
LOC487232 Threadlocker 271, 6 ml Tube
Part No. Description
LOC492142 Threadlocker 271, 36 ml Bottle
LOC1330799 Threadlocker 243, 6 ml Tube
LOC1330906 Threadlocker 243, 36 ml Bottle

286 2023 - 2024 HOT ROD AND EARLY MUSCLE

Locweld™ Bonding Compound High-Temperature
LOC495540 Red Threadlocker 272
A 15-minute, two-part adhesive system that
eliminates the need for welding or brazing. Can
LOC492143
be drilled, sanded, painted, or filed. Resists Threadlocker 272 withstands temperatures
automotive, shop, and cleaning fluids. up to 450° F. and is formulated for heavy-
duty applications using bolts up to 1-1/2".
Prevents fasteners from loosening due to
shock, severe vibration, and heat stress.
Localized heating may be required to
RTV Black Silicone separate parts. Sold in a 36 ml bottle.
General-purpose, black indoor/outdoor
sealant. Seals, bonds, repairs, mends and
secures glass, metal, plastics, fabric, vinyl,
Heavy-Duty Threadlocker
weatherstripping and vinyl wiring. Waterproof 277 LOC555353
and flexible to 450°F. Resists oil, water, High-strength threadlocker is designed
weather, vibration, and grease. for locking 1" and larger bolts or studs
Part No. Description including frame brackets, shock mounts,
LOC491979 RTV Black Silicone, 80 ml Tube or suspension fasteners. Localized heating
LOC495315 RTV Black Silicone, 300 ml Cartridge may be required to separate parts. Sold in
a 36 ml bottle.
RTV Clear Silicone
General-purpose, clear indoor/ outdoor High-Temperature
sealant. Seals, bonds, repairs, mends and
secures glass, metal, plastics, fabric, vinyl, PST 592 Thread Sealant
weatherstripping and vinyl wiring. Waterproof Locks and seals threaded fittings,
and flexible to 450°F. Not for use on copper, eliminating leakage and loosening. Thread
brass, and galvanized metals. sealant PST 592 won't shred or wear like
tape and works with temperatures up to
Part No. Description
LOC491981 RTV Clear Silicone, 80 ml Tube
400°F. Ideal for through-hole head bolts,
LOC495076 RTV Clear Silicone, 300 ml Cartridge
oil sending units, rear axle fill plugs, etc.
Part No. Description
LOC483631 PST 592 Thread Sealant, 6 ml Tube
LOC483630 PST 592 Thread Sealant, 50 ml Bottle

Weatherstrip Adhesives High-Performance

Silicone Gasket Makers
High-performance, fast-curing formulas
are non-corrosive, more flexible than cork/
composite gaskets and more oil resistant
than conventional silicones. Sold in 80
ml tubes, 300 ml cartridges and 190 ml
Fast-drying, high-strength, waterproof adhesive for aerosol cans.
bonding automotive weatherstripping and moldings.
Withstands temperature extremes. Resistant to fuels, 80 ml 300 ml
oils, grease, and most solvents. 5-fl. oz. tube Temperature Tube Cartridge
Description Range Part No. Part No.
Part No. Description RTV 587 Blue -75°–500°F LOC491983 —
LOC495541 Black Weatherstrip Adhesive, 5 fl. oz. Tube
RTV 5699 Grey -75°–625°F LOC491982 —
LOC782111 Yellow Weatherstrip Adhesive, 5 fl. oz. Tube
RTV 598 Black -75°–625°F LOC491985 LOC495074
RTV 5920 Copper -75°–700°F LOC491984 —
RTV Sensor
-65°–500°F LOC491980 —
Safe Blue
Copper Anti-Seize Stick RTV Sensor
-75°–600°F LOC492001 —
Safe Red
LOC504468
Same performance as traditional Loctite®
copper anti-seize paste in a semisolid stick
form, offering more portability and less
mess to 1800°F.

2023 - 2024 HOT ROD AND EARLY MUSCLE 287

Ready Gasket Penetrating
Make leakproof, blowout resistant gaskets in Threadlocker 290
just one minute. Specified on the production Green, low-viscosity threadlocking liquid
lines by GM, Ford, and Chrysler, elastomeric wicks along the threads of pre-assembled
rubber gasket maker is sensor safe and fasteners to secure them in place. Heat
outperforms pre-cut gaskets. Sold in 5-oz. required for removal.
cartridge or 190ml aerosol can. Temperature
Part No. Description
range of -75° to 450°F. LOC487234 Threadlocker 290, 6 ml Tube
5-oz. Cartridge LOC492144 Threadlocker 290, 36 ml Bottle
Part No.
LOC494150
High-Performance
Anaerobic Gasket Makers Thread Sealant PST® Stick
Flexible gasket material eliminates pre- LOC504467
formed, pre-cut paper and cork gaskets. Semi-solid pipe sealant. Immediate low-
Ideal for water pumps, thermostat housings, pressure sealing, eases disassembly, will
transmissions pans, etc. Gasket Maker 515 is not contaminate/clog lines. For metal
designed for rigid, machined surfaces with tapered pipe threads/fittings.
less than .015" gap, while the Gasket Maker
518 is for use on flanged mating surfaces with
gaps up to .050". Sold in 50 ml tubes.
Part No. Description
LOC555352 Gasket Maker 515, 50 ml Tube
Bearing Mount Stick
Aviation Gasket Sealant LOC640482
LOC1525607 Semi-solid bearing mount for bonding
Non-hardening brushtop gasket dressing non-threaded, cylindrical metal
resists gasoline, oil, and grease, and assemblies.
is designed for close-fitting machined
surfaces, sealing hoses and solid gaskets.
Sold in a 16-oz. brushtop can.

High-Flex Gasket Maker Rearview Mirror Adhesive

LOC555354 LOC487865
Anaerobic form-in-place gasket maker that Bonds rear view mirror to windshield
fills gaps to 0.020" and cures to a tough quickly and effectively.
solvent-resistant gasket that flexes with
flange movement caused by vibration,
pressurization, or thermal change.
Temperature resistant to 350°F. 50 ml tube.

Medium-Strength Quick Gel® Super Glue

Blue Stick Threadlocker LOC483624
Semi-solid threadlocker works just like Gel formula super glue designed for fast,
traditional blue liquid. Well-suited for heavy-duty repairs to vertical surfaces.
difficult repairs, as in overhead applications. Works on porous and non-porous
Medium strength, removable. materials.
Part No. Description
LOC506166 Blue Stick Threadlocker, 9 g
LOC504466 Blue Stick Threadlocker, 19 g

High-Strength
Red Stick Threadlocker Quicktite® Super Glue Gel
High-strength semi-solid threadlocker.
Where resistance to heavy shock, vibration,
LOC636095
and stress is required. Heat required for Gel formula super glue in a controlled
removal. dispense, clog-free package. Ideal for
porous surfaces and vertical applications.
Part No. Description
LOC511537 Red Stick Threadlocker, 9 g
LOC511535 Red Stick Threadlocker, 19 g

288 2023 - 2024 HOT ROD AND EARLY MUSCLE

Silver Anti-Seize Stick Disc Brake Quiet Sticks
LOC504469 LOC718808
Same performance as traditional Loctite® Unique wax-like stick dampens brake pad
silver anti-seize paste in a semisolid stick vibrations and eliminates squeaking and
form, offering more portability and less noise, without the sticky smelly mess of
mess to 1600°F. traditional products. Water-resistant. 19g
stick.
Copper Anti-Seize Lubricant
LOC555336 Dielectric
Copper anti-seize and thread lubricant is Tune-Up Grease
used to prevent seizing, corrosion, and galling Provides a moisture-proof barrier
under high temperatures. Ideal for spark plug that lubricates and protects electrical
threads installed in aluminum heads, exhaust connections/wiring from salt, dirt, and
components and bolts, etc. Sold in an 8-oz. corrosion. Extends life of bulb sockets.
brushtop can. Prevents voltage leakage around electrical
connections.
Silver Anti-Seize Lubricant Part No. Description
LOC495545 .33-oz. Tube
LOC501000 LOC495549 80 ml Tube
A heavy-duty, temperature-resistant
(to 1600°F), petroleum-based lubricant
compound fortified with graphite and metallic Heavy-Duty Rubberized
flakes. Will not evaporate or harden in
extreme cold or heat. Use during assembly to Undercoating
prevent seizing, galling, and corrosion. LOC502908
A heavy-duty undercoating that seals,
protects, and insulates. Rubberized for
maximum durability.

Flexible Transmission Dipsticks

Transmission dipsticks are available for all popular
transmissions, in firewall or transmission-mount Anchor-Tight™ Locking
styles. Dipstick assemblies do not have locking feature. Flexible Trans Dipsticks
Available in Brite or black finish. NHRA-approved dipsticks have
Brite Black a locking mechanism to prevent
Description Part No. Part No. the handle from blowing out
Turbo 350, 400 Firewall Mount LOKTD-3350400FM LOKXTD-3350400FM under pressure. Brite- or black-
Turbo 350, Trans. Mount LOKTD-3350TM —
finished dipsticks have bolt-in
Turbo 400, Trans. Mount LOKTD-3400TM —
sealed pan fitting and extra
Powerglide, Firewall Mount LOKTD-30PGFM LOKXTD-30PGFM
Powerglide, Trans. Mount LOKTD-30PGTM —
handle for quick transmission changes and storage.
700-R4, Firewall Mount LOKTD-3700FM LOKXTD-3700FM Brite Black
Transmission Style
700-R4, Trans. Mount LOKTD-3700TM — Part No. Part No.
Powerglide OEM
200-R, Firewall Mount LOKTD-3200RFM — 3" Direct Mount LOK1209124 —
& Aftermarket
GM 4L80E, Firewall Mount LOKTD-34L80FM LOKXTD-34L80FM
Powerglide OEM
GM 4L60E, Firewall Mount LOKTD-34L60EFM LOKXTD-34L60EFM Transmount LOK1210134 —
& Aftermarket
GM 4L60E, Trans. Mount LOKTD-34L60ETM —
Powerglide OEM
GM 6L80E/6L90E, 36" — LOKXTD-36L80FM36 Firewall Mount LOK1210144 LOKX1210147
& Aftermarket
Ford C-4, Firewall Mount LOKTD-30C4FM LOKXTD-30C4FM Bottom Fitting
Ford C-4, In Pan Dipstick LOKTD-30C4FMPAN — Powerglide OEM
Assembly LOK1208114 —
Ford C-6, Firewall Mount LOKTD-30C6FM — & Aftermarket
for Spare Trans
Ford C-6, Trans. Mount LOKTD-30C6TM — TH-350/400 3" Direct Mount LOK1209144
Ford FMX, Firewall Mount LOKTD-3FMXFM — TH-350/400 Firewall Mount LOK1211144 LOKX1211147
Ford AOD, Firewall Mount LOKTD-3AODFM LOKXTD-3AODFM TH-400 Transmount LOK1213134 —
Ford AOD, Firewall Mount, 36" — LOKXTD-3AODFM36 Bottom Fitting
Ford AOD, Trans. Mount LOKTD-3AODTM — TH-350/400 Assembly LOK1208144 —
Chrysler 518 Torqueflite, FIrewall Mount — LOKXTD-3518FM for Spare Trans
Chrysler 727 Torqueflite, Firewall Mount LOKTD-3727FM — Chrysler 727 Firewall Mount LOK1211444 —
Chrysler 727 Torqueflite, Trans. Mount LOKTD-3727TM — Anchor-Tight Transmission Dipstick Accessories
Chrysler 904 Torqueflite, Firewall Mount LOKTD-3904FM — Trans Dipstick Plug, Clear Anodized LOKATA-6906 —

2023 - 2024 HOT ROD AND EARLY MUSCLE 289

Anchor-Tight™ Locking Flexible Billet Aluminum Direct-Mount LS
Engine Dipsticks Series and Ford Coyote Gauge-to-Fit
NHRA accepted for use in all Engine Dipsticks
categories of competition! Locking With its billet aluminum handle and E-Z read
mechanism eliminates expulsion flexible inner cable, Lokar’s billet aluminum
of dipstick handle under pressure. direct-mount LS Series and Coyote gauge-
PTFE-lined stainless braided outer to-fit engine dipsticks are ideal replacements
housing. E-Z to read flexible inner for factory dipsticks and handles. Designed to
dipstick measuring cable. Choose from bright or black mount directly into the factory dipstick tube,
finish. the direct-mount LS Series and Coyote gauge-
Engine Year Style Brite to-fit engine dipsticks feature billet aluminum
Part No.
handles and a "U-Cut-To-Fit" E-Z read flexible inner
Chevy 502
Big Block
N/A Push into Pan LOK1220054 cables for accurate engine oil measurement.
Chevy Hi-Tech Black
N/A Push into Pan LOK1220024 Engines
Big Block Part No. Part No.
Chevy 1980 & Push into Block LS Series Engines LOKED-5000LS1 LOKXED-5000LS1
LOK1220004 Ford Coyote Engine LOKED-5000COY LOKXED-5000COY
Small Block Later Passenger's Side
Chevy 1979 & Push into Block
LOK1220014
Small Block Earlier Driver’s Side Transmission Dipstick Funnel Adapter
Push into Block
Ford 302 5.0 1986-95
Driver’s side
— LOKATA-6900
GM LS1
1997 & Push into Block
LOK1220074 Designed to fit into most standard transmission dipstick
Later Passenger's Side tubes too small for a standard funnel, this aluminum and
1/4" NPT Pan Fitting Gauge to Fit, clear vinyl helps make adding transmission fluid easy and
Universal N/A 12" Housing Length, Extra-Long LOK1220174
Inner Rod
spill-free.

Throttle Cables
Stainless steel and universal
Flexible Engine Dipsticks black housings have specially
extruded liners for extended
cable life. Aluminum fittings
and ferrules eliminate fraying.
Brite Black Cut-to-fit universal housing is
Description Part No. Part No. 24" long, with stainless ends and
Small Block Chevy (1979 and Earlier)
LOKED-5000ESB — adapts to stock or custom pedals.
No Tube, Directly into Block.
Small Block Chevy (1979 and Earlier) LOKED-5002 LOKXED-5002 Part No. Description
LOKTC-1000HT High Tech Throttle Cable, 24" Stainless Steel
Small Block Chevy (1980 and Later) LOKED-5001 LOKXED-5001
LOKTC-1000U Universal Throttle Cable, Black Housing
Small Block Chevy Vortec Ram Jet
LOKED-5009 LOKTC-1000TP Tuned Port High Tech Throttle Cable, Stainless Steel
350
Dart Small Block Chevy SHP, Block LOKTC1000BLD High Tech Throttle Cable, Blower Drive
LOKED-5018 LOKXED-5020 LOKTC-1000HT36 High Tech Throttle Cable, 36"
Mount
LS Series (1997 and Later) LOKED-5008 LOKXED-5008 LOKTC-1000U36 Universal Throttle Cable, 36" Black Housing
Big Block Chevy 396-454 LOKED-5003 LOKXED-5003 LOKTC-1000LS1 LS1 Throttle Cable, Stainless Housing
Big Block Chevy 502 LOKED-5006 — LOKTC-1000LS1U LS1 Throttle Cable, Black Housing
Small Block Ford 289-302
(1962-69 Through Timing Chain LOKED-5010 — Polished Hi-Tech Throttle Cables
Cover)
Polished cables are available in
Small Block Ford 302 (1970-85) LOKED-5013 —
Small Block Ford 5.0L (1986-95) LOKED-5004 LOKXED-5004
stainless steel braided housing or
Small Block Ford 4.6L Modular
black housing. They are designed
LOKED-5014 — with a specially extruded liner
(1994-04)
Small Block Ford 351W (Screw into for extended cable life – not to be
LOKED-5005 —
Pan) confused with ordinary braided
Ford FE LOKED-5012 — brake hose. Cables are equipped
Big Block Ford 460 & 514 (Crate
LOKED-5011 — with polished aluminum fittings LOKTCP-1000HT
Engines Only)
and polished aluminum ferrule to eliminate fraying.
Ford Flathead V8 1937-1953, Screw
into Pan
LOKED-5016 — “U-Cut-to-Fit” outer housing is available in 24" or 36"
LS Series 1999 and Later, Truck LOKED-5019 — lengths with a “U-Cut-to-Fit” stainless inner wire.
Big Block Mopar, Front Sump Only LOKED-5026 — Stainless Steel Black Housing
Description Part No. Part No.
24" Hi-Tech Throttle Cable LOKTCP-1000HT LOKTCP-1000U
36" Hi-Tech Throttle Cable LOKTCP-1000HT36 LOKTCP-1000U36
Tuned-Port 1985-91 & LT1/LT4
LOKTCP-1000TP —
Hi-Tech Throttle Cable
36" LS1 Hi-Tech Throttle Cable
LOKTCP-1000LS1 LOKTCP-1000LS1U
(also use for Ram Jet 350)

290 2023 - 2024 HOT ROD AND EARLY MUSCLE

Edelbrock Carburetor Duo Pak Throttle Cable Kits
Billet Throttle Cable Bracket Kit is equipped with either a
CNC-machined from billet Hi-Tech stainless steel braided
6061-T6 aluminum, available in cable or a black universal
clear or black anodized finish. throttle cable... plus the Lokar
Designed to fit single or dual- stainless steel carb bracket
quad carburetors. Includes dual and return spring kit. Fits Holley, Edelbrock, Carter AFB,
stainless steel return springs Q-Jet, and in-line dual quads.
for use with Lokar cable, and all Part No. Description
installation hardware. Hi-Tech Stainless Steel Throttle Cable, With SS Bracket
LOKDP-1000HT
And Springs
Part No. Description LOKDP-1000U Universal Black Cable With SS Bracket And Springs
LOKTCB-40DQ Edelbrock Carb Bracket With Dual Springs, Clear
LOKXTCB-40DQ Edelbrock Carb Bracket With Dual Springs, Black
LS1 Billet Aluminum
Turbo 350 Black Stainless Throttle Cable Bracket
Billet aluminum clear or midnight black
Kickdown Bracket anodized throttle bracket mounts to the side
LOKXKDB-4350 of the LS1 manifold. Available with a single stud
Bolts directly onto a 4-barrel type small for throttle only or double to add cruise control cable.
block Chevy intake manifold. For use Designed to be used with Lokar cables.
with all GM square-style kickdown cable Part No. Description
assemblies. Black stainless steel finish. LOKTCB-40LS13 2000-02, Cable Bracket, Single Stud, Aluminum
LOKXTCB-40LS1 1998-99, Cable Bracket, Single Stud, Black
LOKXTCB-40LS13 2000-02, Cable And Cruise Control, Single Stud, Black
TH-350 Stainless Kickdown
Bracket And Cable
Standard adjustable GM detent cable with
black housing includes Lokar's stainless
mounting bracket for
installation on the back two intake manifold
bolts on a small block Chevy. Designed for Chevy
4-barrel carburetors, kit includes extender for more Kickdown Kits
cable adjustment versatility. Stainless bracket is sold Part No. Description
separately. Turbo 350 Black
LOKKD-2350U
Part No. Description Kickdown Cable/Bracket
LOKKD-2350U TH-350 Stainless Kickdown Bracket And Cable LOKKD-2350HT High Tech Turbo 350 Kickdown Kit
LOKKD-B4350 TH-350 Stainless Bracket Only LOKKD-2400HT Turbo 400 Electric Kickdown Kit
LOKKD-20PGHT High Tech Powerglide Kickdown Kit
TH-400 Electric Kickdown Kit LOKKD-2700HT
LOKKD-2700TP
High Tech 700-R4 Kickdown Kit
TPI High Tech 700-R4 Kickdown Kit
LOKKD-2400HT LOKKD-2200RHT High Tech 200-R4 Kickdown Kit
Cable-operated electric switch is LOKKD-20C4HT High Tech Ford C-4 Kickdown Kit
housed in a billet aluminum box that LOKKD-20C6HT High Tech Ford C-6 Kickdown Kit
LOKKD-2FMXHT High Tech Ford FMX Kickdown Kit
mounts to transmission pan bolts.
LOKKD-2AODHT High Tech Ford AOD Kickdown Kit
A “U-Cut-To-Fit” stainless steel
LOKKD-2727HT High Tech Chrysler 727 Kickdown Kit
sheathed cable allows mounting LOKKD-2904HT High Tech Chrysler 904 Kickdown Kit
anywhere within 48" of the carburetor. Kit
includes instructions and eliminates mounting unsightly
switches on the carburetor, intake manifold or gas pedal.

Throttle Brackets and Springs

Part No. Description
LOKKD-B4350 Stainless Steel Turbo 350 Kickdown Bracket
LOKSRK-4000 Stainless Steel Throttle Cable Bracket And Springs
LOKSRK-4001 Stainless Steel Throttle Cable Bracket
LOKSRK-4002 Stainless Steel Springs
Stainless Steel EFI Bracket, Fits 1986-93 Ford 302 And 351 Electronic Fuel Injection Systems That Have Installed LOKSRK-4000
LOKTCB-40EFI
The Mustang EGR Spacer
LOKTCB-40LS1 LS1 Throttle Cable, Single Stud
LOKTCB-40LS12 LS1 Throttle Cable And Cruise Control Bracket, Double Stud
LOKTCB-40LT4 LT-4 Throttle Cable And Kickdown Bracket
LOKTRP-4003 Stainless Steel Tri-Power Throttle Cable Bracket And Springs

2023 - 2024 HOT ROD AND EARLY MUSCLE 291

Vintage Series Throttle and Kickdown Cables
Designed for use with most factory and aftermarket throttle assemblies, these throttle and
kickdown cables combine retro styling with modern functionality. Underneath a vintage-style
lacquer-coated braided cotton, an extruded PTFE inner liner provides smooth operation. Made in
the USA and covered by a lifetime warranty.

Part No. Description Part No. Description

Throttle Cables Kickdown Kits
24" Black Fittings, Black Wrap w/White Tracers Ford C4 Black Aluminum Fittings Black Wrap
LOKVS-1003 LOKVS-20C45
for Carburetor w/Red Tracers
24" Black Fittings, Black Wrap w/Blue Tracers Ford C6 Black Aluminum Fittings Black Wrap
LOKVS-1004 LOKVS-20C63
for Carburetor w/White Tracers
24" Black Fittings, Black Wrap w/Red Tracers Ford C6 Black Aluminum Fittings Black Wrap
LOKVS-1005 LOKVS-20C64
for Carburetor w/Blue Tracers
36" Black Fittings, Black Wrap w/Blue Tracers Ford C6 Black Aluminum Fittings Black Wrap
LOKVS-100436 LOKVS-20C65
for Carburetor w/Red Tracers
36" Black Fittings, Black Wrap w/Red Tracers Ford AOD Black Aluminum Fittings Black Wrap
LOKVS-100536 LOKVS-2AOD4
for Carburetor w/Blue Tracers
48" Black Fittings, Black Wrap w/WhiteTracers Ford AOD Black Aluminum Fittings Black Wrap
LOKVS-100LS1348 LOKVS-2AOD5
for GM LS1 w/Red Tracers
48" Black Fittings, Black Wrap w/Blue Tracers Chrysler 727 Black Aluminum Fittings Black Wrap
LOKVS-100LS1448 LOKVS-27274
for GM LS1 w/Blue Tracers
48" Black Fittings, Black Wrap w/Red Tracers
LOKVS-100LS1548
for GM LS1

Goolsby Edition Pedal Pads Throttle, Brake, and

and Assemblies Dimmer Switch Components
Goolsby Edition pedal pads and
Part No. Description
assemblies add a classy touch to any LOKBAG-6004 Billet Gas Pedal with Rubber Insert
custom project! Brake and clutch pads LOKBAG-6005 Billet Brake Pedal Pad with Rubber Insert
are compatible with most aftermarket LOKBAG-6006 Billet Dimmer Switch Cover with Rubber Insert
brake and clutch arms. The throttle Chrome Steel Spring Loaded Gas Pedal with
LOKSG-6007
assembly arms are splined for right or left Rubber Insert
adjustment of mounting bracket. Edge LOKSG-6008
Chrome Steel Brake Pedal Pad with
Series pads are made with billet aluminum Rubber Insert
Chrome Steel Dimmer Switch Cover with
with a brushed or black anodized finish, and feature LOKSG-6009
Rubber Insert
removable inserts for customization. Lucille Series pads LOKSPO-6070 Spoon Gas Pedal
and assemblies are chromed steel with rubber inserts,
with or without ribs on the pedal pad surface.
“XL” Series
Description Part No. Throttle LOKBFG-6012
Edge Series
Brake/Clutch Pedal Pad (Pair), Brushed LOKBAG-6194 Assemblies
Throttle Pedal Pad, Brushed LOKBAG-6195 “XL” pedals have larger
Throttle Pedal Pad, Black LOKBAG-6196 pedal pads than standard
Lucille Series pedals, for improved
Throttle Pedal Assembly, with Ribs LOKBAG-6207 comfort and safety.
Throttle Pedal Assembly LOKBAG-6208
Part No. Description
Brake/Clutch Pedal Pad, with Ribs (One) LOKBAG-6209
LOKBFG-6012 XL Billet Throttle Pedal with Rubber Insert
Brake/Clutch Pedal Pad (One) LOKBAG-6210
LOKBFG-6013 XL Billet Brake Pedal Pad with Rubber Insert
XL Chrome Steel Throttle Pedal, Spring Loaded
LOKSG-6016
with Rubber Insert
LOKSG-6017 XL Chrome Steel Brake Pedal Pad with Rubber Insert
Eliminator Floor-Mounted Gas Pedal LOKXBFG-6012 XL Black Billet Throttle Pedal with Rubber Insert
Pulls the throttle cable from under the LOKXBFG-6013 XL Black Billet Brake Pedal Pad with Rubber Insert
floorboard. Pedal has a splined shaft for
precise adjustment, and a built-in pedal stop.
Requires a 36" throttle cable. Competitor Series
Part No. Description Throttle Assembly
LOKFMG-6097 XL Billet Throttle Pedal
LOKFMG-6098 XL Billet Throttle Pedal With Rubber Pad LOKBAG-6148
Competitor Series throttle assembly
is designed with a unique internal
spanner nut ensuring perfect pedal
tension and eliminating excessive ‘slop’
in the throttle pedal. Billet aluminum
competitor throttle pedal assembly with rubber,
centered mounting, brushed.

292 2023 - 2024 HOT ROD AND EARLY MUSCLE

1967-72 Chevy/GMC C-10 Drive-by-Wire Electronic
Direct-Fit Brake and Clutch Throttle Control Pedal Assembly
Arms with Standard Pads Programmable
electronic throttle
LOKBCA-9508 pedal uses a
Billet aluminum curved contactless solid-
direct-fit automatic brake state Hall Effect
pedal arm with standard pads. sensor for use in
most applications.
Made of aluminum
and stainless steel,
the assembly
includes a splined pedal arm for versatile
mounting. Sensor programmed on pedal to
Lakester Steel Pedals optimize electrical output for quick throttle response and
Lakester pedals feature improved performance over OEM pedals.
curved pads and arms, and Note: All Drive-by-Wire Electronic Throttle Control Pedal Assemblies require (1) Electronic
the removable lower arm Throttle Control and (1) Drive-by-Wire Pedal Set to make the complete assembly.
is splined for versatility Part No. Description
in mounting to the right Drive-By-Wire,
or left of the mounting Electronic Throttle Control with Harness
bracket. The nostalgic- LOKBDBW-GM02 2006-Up Corvette
style pedals are available Drive-By-Wire Spring Loaded Throttle Pedal Set
LOKDBW-6012 XL Billet Alum with Rubber Pads
chromed, black, and
LOKXDBW-6012 Black XL Billet Aluminum with Rubber Pads
raw. Pedals have Delrin
bushings for smooth
operation.
Raw Chromed Black
Part No. Description Color
LOKBAG-6151 Throttle Pedal Chromed
LOKXBAG-6151 Throttle Pedal Black
LOKBAG-6154 Throttle Pedal Raw

Pedal Pads and Assemblies

Throttle pedal assemblies bolt into the stock location to change rod linkage to cable linkage. The throttle pads are spring-
loaded like original and splined for right or left adjustment of the foot pad. Pads and assemblies are billet aluminum with
rubber inserts and available in polished aluminum and black powder-coated finish. The pedal pads are machined to fit over
the stock steel pads.
Black Brushed
Application Description Part No. Part No.
Chevrolet
1967-69 Camaro/Firebird Gas Pedal Assembly LOKXBAG-6096 LOKBAG-6096
1967-69 Camaro/Firebird Emergency Brake Pad Only — LOKBAG-6099
1955-57 Chevy Brake/Clutch Pad — LOKBAG-6076
1955-57 Chevy Automatic Power Brake Pad — LOKBAG-6078 LOKXBAG-6123
1964-67 Chevelle Throttle Pedal — LOKBAG-6129
1964-72 Chevelle Brake/Clutch Pad — LOKBAG-6132
1962-67 Chevy II/Nova Throttle Pedal — LOKBAG-6127
1968-72 Chevy II/Nova Throttle Pedal Assembly — LOKBAG-6142
1967-72 C-10 Pickup Emergency Brake Pad — LOKBAG-6169
1967-70 C-10 Pickup Throttle Pedal — LOKBAG-6164
1967-72 C-10 Pickup Throttle Pedal — LOKBAG-6165
Ford
1964-68 Mustang Gas Pedal Assembly LOKXBAG-6115 LOKBAG-6115
1969-70 Mustang Gas Pedal Assembly — LOKBAG-6117
1964-68 Mustang Brake Pedal Pad, A/T LOKXBAG-6123 LOKBAG-6123
1964-70 Mustang Brake And Clutch Pedal Pads, M/T — LOKBAG-6121
1964-68 Mustang Throttle Pedal — LOKBAG-6115
1969-70 Mustang Throttle Pedal — LOKBAG-6117

2023 - 2024 HOT ROD AND EARLY MUSCLE 293

Oval Interior Universal Door Latch
Door Handles Release Kit
Handles operate very smoothly LOKDLR-2100
and will work with most door A cut-to-fit stainless cable
hardware and latches. with an adjustable connection
Part No. Description makes installation easy. Solid rods and bell cranks are
LOKIDH-2000 Oval Billet Interior Door Handles eliminated. Kit is compatible with most door handles and
LOKIDH-2001 Oval Polished Interior Door Handles latches.

Polished Billet Crescent Oval

Arm Rest Door Pulls Billet Aluminum
LOKIDP-2003 Window Cranks
Door pulls complement Replacement window cranks are
Lokar oval door handles, offered in brushed or polished
pedals, and dash inserts. finishes, and fit most 1949 and
Door pulls recess into arm later GM and Ford applications.
rest, have a deep, four- Sold in pairs.
finger pocket and install Part No, Description
with just two screws. Mounting bracket and stainless LOKIDH-2014 Window Cranks, Brushed Finish
steel screws are included.
LOKIDH-2015 Window Cranks, Polished Finish

Billet Aluminum Dash Knobs and Dash Knob Bezels

Billet aluminum dash knobs and mathing bezels are available in multiple styles and finishes. Knobs feature a 3/16" hole and
set screw, while bezels are available with either male or female threaded options.
Brushed Black Polished Chromed
Description Part No. Part No, Part No. Part No.
Deco Style
Dash Bezel w/ 7/16"-20 Male Threads — LOKDK-002P —
Dash Bezel w/ 7/16"-28 Male Threads — LOKXDK-009 LOKDK-004P —
Dash Bezel w/ 7/16"-28 Female Threads — LOKXDK-005 — —
Hi-Tech Style — —
Dash Knob w/ 3/16" Hole and Set Screw LOKDK-006 LOKXDK-006 — —
Dash Bezel w/ 7/16"-20 Male Threads LOKDK-007 LOKXDK-007 — —
Dash Bezel w/ 7/16"-20 Female Threads LOKDK-008 — —
Dash Bezel w/ 7/16"-28 Female Threads LOKDK-010 — —
Lucille Style
Dash Knob w/ 3/16" Hole and Set Screw — — LOKDK-011P —
Dash Bezel w/ 7/16"-20 Male Threads — — LOKDK-012P —
Dash Bezel w/ 7/16"-20 Female Threads LOKDK-013 — LOKDK-013P —
Dash Bezel w/ 7/16"-28 Female Threads LOKDK-015 — LOKDK-015P LOKDK-015C

Goolsby Edition "Lucille" Series Door Handles, Window Cranks, and Seat Levers
Goolsby Edition door handles and window cranks offer a stylish solution for classic and custom cars alike. Made of chrome-
plated billet aluminum, they are designed for perfect fit, easy installation, and concours-quality looks. Sold in pairs.

Interior Door Window Vent Window Seat

Application Handles Cranks Cranks Adjustment
Levers
GM & Ford 1949-Up LOKGSE-2166 LOKGSE-2167 LOKGSE-2168
LOKGSE-2169
GM Pre-1949 LOKGSE-2170 LOKGSE-2171 LOKGSE-2172 (for all)
Ford Pre-1949 LOKGSE-2173 LOKGSE-2174 LOKGSE-2175

294 2023 - 2024 HOT ROD AND EARLY MUSCLE

Manual Transmission Shifter
Shifter Boot Kits
LOKMSL6B2 Lokar shifter boots are made of black
16" double-bend chrome tubular shifter fits Naugahyde. All sets include a boot,
Tremec/Borg Warner, T5, T4, and T56 stock and stainless base ring, or billet aluminum
aftermarket 5- and 6-speed transmissions ring with ball milled edge and stainless
with 2-bolt flanges and 7/8" center-to-center screws. Stainless boot rings are available in polished
bolt holes. Levers are billet steel with stainless or black powder coat. Aluminum boot rings are
counter sunk studs for cap screws and available in brushed aluminum or black anodized finish.
3/8"-24 threads for knob (not included). Boot Ring Dimensions
Outer Inner
Description Dimension Dimension
Stainless Round Shifter Boot Ring 5" 4"
Billet Aluminum Billet Aluminum Round Shifter Boot Ring 5-1/4" 4"
Stainless Rectangular
Tremec Shifter Levers Floor Mount Shifter Boot Ring
6-3/4" x 5-1/4" 5-1/2" x 4"

Window-style aluminum shifter levers fit Billet Aluminum Rectangular

6-3/4" x 5-1/4" 5-1/2" x 4"
factory and aftermarket Tremec T5, T45, Floor Mount Shifter Boot Ring
T56, and TKO transmissions with 2-bolt Stainless Black Black
flanges. A machined groove accepts Description Ring Billet Ring Anodized Ring Stainless Ring
Lokar boot attachment, and 3/8"-16 Classic
LOK70-CLB — — —
Shifter Boot
threads fit shift knob (not included).
Hot Rod
Brushed chrome finish. Shifter Boot LOK70-HRB LOK70-BHRB — —
Brushed Part No. Description - Round
Tremec/Borg Warner T5, T45, T56 Rectangular
LOKMSL6C Shift Lever 12" Floor Mount LOK70-FMB LOK70-BFMB LOKX70-BFMB LOKX70-BFMB
LOKMSL6B2 Shift Lever 16" Double Bend Shifter Boot
Tremec TKO/Magnum
LOKMSL602C Shift Lever 12" Adjustable Column
LOKMSL604B2
Billet Aluminum TKO 500-600/Magnum
Shift Lever 16" Double Bend
Shift Linkage
LOKMSL611D Manual Shift Lever 10"
Ease connection of
Billet Aluminum Tremec T5, T45, T56
a column shift to an
LOKMSL620F Shift Lever 6 Straight automatic transmission
with an aluminum
adjustable column shift linkage kit. Works with all GM-
Hi-Top Shifter Boot style factory or aftermarket columns. The rigid, clean
LOK70-BAF1 design assures proper ratio adjustment between the
Rectangular boot with aluminum bezel. transmission and the indicator on the column.
Boot includes bezels that attach to the Part No. Description
shifter and double as jam nuts. Receiver LOKACA-1800 TH350/400/700-R4/TH200/TH4L60/4L60E
grooves ease boot attachment. Available LOKACA-1801 Ford C4/C6
with 3/8"-24 threads. Boot covers an LOKACA-1807 Ford AOD
entire 6" or 8" Lokar lever. Boot rings
(sold separately). Ford AOD Selector Shaft and Arm
Designed for the Ford AOD
Deluxe Top Shifter Boots automatic transmission,
Boot’s sliding bezels have O-rings to replacement selector shaft and arm
fasten boot anywhere along the length standardize the shift linkage for easy
of the lever. The bezel receiver groove installation of virtually any aftermarket
eases boot attachment. Sliding bezel shifter. Zinc plated for corrosion resistance,
LOKATA-1001
works on Lokar’s 5/8" shifter levers. shaft and arm replace the OEM unit, and are
Boot rings sold separately. adjustable for use with multiple applications.
The kickdown seal is installed and stainless
Part No. Description
Deluxe Top Rectangular Boot hardware is included.
LOK70-BAF3
with 5/8" Billet Aluminum Sliding Bezel Part No. Description
Individual Bezels LOKATA-1000 1/4" Slot And Hole
LOK70-BAB3 5/8" Round Billet Aluminum Sliding Bezel LOKATA-1001 5/16" Slot

5-Speed Manual Shift Knob

LOKSK-6876
Round two-inch diameter shift knob fits
five- and six-speed shifters. Black knob
has 3/8"-24 threads.

2023 - 2024 HOT ROD AND EARLY MUSCLE 295

Automatic Transmission Shifters Shift Knob Adapter
Lokar Shifters combine old-time styling with modern Lokar developed a shifter knob
technology and are designed especially for street rods. adapter which allows you to express
Exclusive safety lock-out button prevents accidentally yourself with highly custom knobs,
shifting from Park into Reverse or Drive. The mount is yet still retain all of the safety
completely adjustable front to rear and can be mounted features and benefits of a Lokar
where it fits the best. shifter, including the positive lock-
out in Park and Neutral.
Part No. Description
LOKSK-6878 Chrome Shifter Knob Adapter, 3/8"-16 Knob
Transmission LOKSK-6879 Chrome Shifter Knob Adapter, 3/8"-24 Knob

Mounted Shifters Knobs for

Shifters mount directly to LOKSK-6914
transmission case. Sold Shifter Knob Adapter
complete with installation Each knob includes aluminum 3/8"-16
hardware and brushed and 3/8"-24 thread inserts with polished
mushroom knob. Nostalgia jam nuts.
lever has two bends. Part No. Description
Part No. Description LOKSK-6883 2 1/4" Plain White Shift Knob, 3/8"-16 and 3/8"-24
LOKCM350AM TH-350 Shifter, 23" Lever, Mushroom Knob LOKSK-6914 2" Solid Round Polished Shift Knob, 3/8-24 Thread
TH-350 Shifter,
LOKCM350ANMB
3" Nostalgia Lever, Mushroom Knob Premium Aluminum
LOKCM350BM TH-350 Shifter, 16" Lever, Mushroom Knob
LOKCM350CM TH-350 Shifter, 12" Lever, Mushroom Knob
Shifter Knobs
700R-4 Shifter, All Premium shifter knobs are designed
LOKCM700ANMB
23" Nostalgia Lever, Mushroom Knob with our Teflon®-lined safety lock-out
LOKCM700AM 700R-4 Shifter, 23" Lever, Mushroom Knob button and function with the same
LOKCM700BM 700R-4 Shifter, 16" Lever, Mushroom Knob smooth operation as our original
LOKCM700CM 700R-4 Shifter, 12" Lever, Mushroom Knob factory installed knobs.
Part No. Description
LOKSK-6920 2" Solid Round Satin Shift Knob with Plain Button
LOKSK-6921 2" Solid Round Black Shift Knob with Plain Button
LOKSK-6922 2" Solid Round Polished Shift Knob with Plain Button

Floor Mount Shifters Back-Up Light/

Shifters may be installed above or below the
floor or the transmission tunnel. Shifters Neutral Safety
have positive safety lock-outs in park and Switch
neutral, built-in neutral safety switches, LOKBL1400U
chrome- plated levers, and brushed
Use kit as back-up
mushroom knob. Kits include quad arm
light switch or neutral
with quad offsets for mounting on left
safety switch (cannot
or right.
function as both). Fits
Part No. Description TH-350, TH-400, and 700-R4.
LOKFM350BM TH-350 Shifter, 16" Lever
LOKFM350CM TH-350 Shifter, 12" Lever
LOKFM350DM TH-350 Shifter, 10" Lever Emergency Brake Warning
LOKFM700DM 700-R4 Shifter, 10" Lever Indicator Switch Kit
LOKFM700EM 700-R4 Shifter, 8" Lever
LOKEHB-7001
Kit includes micro switch,
AxiShift™ Shift Lever Adapters warning indicator trigger,
Designed to provide precise shifter lever electrical terminals,
placement for optimal control and driver E-clip and pin, and
comfort, AxiShift Shift Lever Adapters stainless mounting
allow the the lever to be rotated 360° with hardware.
up to 15° of tilt in in any direction. Made of
high-strength steel, AxiShift bolts onto
Tremec TKO-500/600, T-56, and TKX transmissions,
while the AxiShift Pro is a direct-fit replacement for the
Tremec TKO-500/600 and TKX control lever.
Part No, Description
LOKMSL700 AxiShift Shift Lever Adapter
LOKMSL701 AxiShift Pro Shift Lever Adapter

296 2023 - 2024 HOT ROD AND EARLY MUSCLE

Oval LED Taillights Trunk Release Cable Kit
LOKTL-1911 LOKTR-1200U
CNC-machined from 6061-T6 aluminum Kit includes cable stop and 15 feet of
and chrome plated, LED lights have three black outer housing with 16 feet of
functions; taillight, turn signal, and brakes. Lights are inner wire. Must be used with cable-
assembled for easy installation and include stainless activated latches.
hardware and instructions. XL Oval LED Taillights (Outer
Bezel Measures 3" x 6-1/2") . Sold in pairs. Hood Release Cable Kits
Includes aluminum firewall fittings, cable stop and cut-
Column Cable Shift Linkage to-fit cable. Cable outer housing is 18 inches inside the
Kit includes an vehicle and six feet under the hood. Inner wire is nine
aluminum billet arm feet. For use with cable-activated latches.
that can be mounted Part No. Description
on either side of the Stainless Steel Hood Release
LOKHR-1100HT
column – great in Cable Kit
tight spaces, and a LOKHR-1100U
Black Housing Hood Release
60" long cable with a Cable Kit
stainless steel inner
wire and a black, Hood Prop
PTFE-lined housing. LOK0401014
Compatible with the Lokar shift indicator system and Stainless steel hood prop has three-level prop
back-up light/neutral safety switch kit (LOKBL1400U). which increases the opening of the hood by
Part No. Description about 12 inches.
LOKACA-1804 2" Aftermarket GM Column Shift Linkage
LOKACA-1805 2-1/4" Aftermarket GM Column Shift Linkage
Goolsby Edition 12-Volt Door
Billet Handbrake Boot Handles
LOK70-BHBF LOKGSE-2106
Black naugahyde boot includes Goolsby Edition exterior 12-volt
stainless round base ring and door handles add a classy,
stainless screws. Polished upscale touch. Billet aluminum
stainless bezel on top fits over handles feature a 12-volt
shaft and tightens with a pull-tie. pressure pad switch to trigger
electric-actuated door latches.
Sold in pairs
Floor-Mounted
Lokar expands its Midnight Series
Emergency Brake Handle product line with brand new black
LOKEHB-7000F stainless steel housing and black
Floor-mounted aluminum fittings for many of the
emergency product lines. Great for that all-
brake handle black look.
has a chromed Black Hi-Tech Throttle Cables
steel handle and a zinc-plated Part No. Description
bracket for corrosion resistance. Versatile mount allows LOKXTC-1000HT 24" Throttle Cable
for floor or side mounting. Cables are sold separately. LOKXTC-1000HT36 36" Throttle Cable
LOKXTC-1000LS1 36" LS1 Throttle Cable

Black Hi-Tech Kickdown Kits

U-Cut-to-Fit Part No. Description
Speedometer Cable Kits LOKSP-1500U
LOKXKD-2350HT GM TH-350 Kickdown Kit
LOKXKD-2400HT GM TH-400 Electric Kickdown Kit
Part No. Description LOKXKD-2700HT GM 700-R4 Kickdown Kit
Fits GM TH-350, TH-400, 700-R4, Powerglide, LOKXKD-20C6HT Ford C-6 Kickdown Kit
LOKSP-1500U
TH-200, 200-R4, 4L60, Chrysler 727 and 904
LOKXKD-2AODHT Ford AOD Kickdown Kit
LOKSP-1502U Fits Ford C-4, C-6, AOD and FMX
LOKXKD-2727HT Chrysler 727 Kickdown Kit

Black Throttle Cable Brackets

Part No. Description
Stainless Steel Carburetor Bracket
LOKXSRK-4000
and Stainless Springs
LOKXSRK-4001 Stainless Steel Carburetor Bracket

2023 - 2024 HOT ROD AND EARLY MUSCLE 297

Emergency Brake Cable Kits Black Eliminator Floor
Mounted Gas Pedal
LOKXFMG-6098
Black billet pedal with rubber pad pulls the
throttle cable from under the floorboard. It
has a splined shaft for precise adjustment,
and a built-in pedal stop. Requires a 36-inch
LOKEC-80FHT LOKEC-80FU
throttle cable.
Universal emergency brake cable kits are for use with
Lokar's emergency brake handles. Kits include two 8-foot
long cut-to-fit cables, adjustable cable lock, and clevis.
These are available in either a black nylon or stainless Black Transmission
braided outer housing.
Dipsticks
Black Stainless Clevis Kit
Application Part No. Part No. Part No. Part No. Description
Chevy Drum LOKEC-80FU LOKEC-80FHT — Firewall Mount
Ford Drum LOKEC-80FU LOKEC-80FHT — LOKXTD-3350400FM Hi-Tech Trans Dipstick, GM 350/400
Chrysler Drum LOKEC-80FU LOKEC-80FHT — LOKXTD-30PGFM Hi-Tech Trans Dipstick, GM Powerglide
Dana Drum LOKEC-80FU LOKEC-80FHT — LOKXTD-3700FM Hi-Tech Trans Dipstick, GM 700-R4
Lincoln Versailles LOKEC-80FU LOKEC-80FHT — LOKXTD-34L60EFM Hi-Tech Trans Dipstick, GM 4L60E
Corvette 1984 to 1987* LOKEC-80FU LOKEC-80FHT LOKEC-80CC LOKXTD-34L80FM Hi-Tech Trans Dipstick, GM 4L80E
Corvette 1988 and Later* LOKEC-80FU LOKEC-80FHT LOKEC-80WC LOKXTD-30C4FM Hi-Tech Trans Dipstick, Ford C-4
Thunderbird 1987 to 1988 LOKEC-80FUTB Special Order — LOKXTD-3AODFM Hi-Tech Trans Dipstick, Ford AOD
Ford Racing with Internal
LOKEC-81FU LOKEC-81FHT LOKEC-81FC
Drum E-Brake* Black Anchor-Tight Locking
Wilwood with Internal Drum
E-Brake
LOKEC-81FU LOKEC-81FHT — Flexible Engine Dipsticks
Wilwood with Stand Alone
LOKEC-80FU LOKEC-80FHT LOKEC-80WC
E-Brake Caliper*
Baer Brakes LOKEC-80FU LOKEC-80FHT —
Part No. Description
SSBC with Standard
LOKEC-80FUTB Special Order — LOKX1220077 LS1, 1997 and Later
Calipers
LOKX1220177 1/4" NPT Fitting, Universal Gauge-to-Fit
SSBC with Integrated
LOKEC-80FU LOKEC-80FHT LOKEC-80WC
E-Brake*
SSBC with Stand-Alone
LOKEC-80FU LOKEC-80FHT LOKEC-80WC
E-Brake Caliper* Black Flexible Engine Dipsticks
* Clevis kit required to fit application.

Billet Aluminum Air Cleaner Nuts

NHRA accepted for use in all categories of competition.
Part No. Description
Chevy
LOKXED-5001 1980 and Later, Small Block Chevy
Machined billet aluminum air cleaner nuts with protective LOKXED-5002 1979 and Earlier, Small Block Chevy
LOKXED-5003 Big Block Chevy
O-ring and 1/4"-20 threads
LOKXED-5008 LS1
Part No. Description Ford
LOKACN-001P Lokar Style, Polished FInish LOKXED-5004 302 Ford
LOKACN-002C Lucille Style, Chromed FInish
LOKACN-002P Lucille Style, Polished Finish
LOKXACN-001 Lokar Style, Black FInish
Black Anchor-Tight Locking
LOKXACN-002 Lucille Style, Black Finish Flexible Transmission Dipsticks
LOKXACN-003 Deco Style, Black Finish
LOKX1210147
Black XL Series Pedal Assemblies
XL pedals have larger pedal pads than
NHRA-accepted for use in all catagories of competition.
standard pedals to provide improved comfort
Firewall-mount, for OEM and aftermarket GM Powerglide.
and safety.
Part No. Description
XL Black Billet Aluminum Throttle
LOKXBFG-6012
Pedal with Rubber Insert
XL Black Billet Aluminum Brake Pedal
LOKXBFG-6013
Pad with Rubber Insert

298 2023 - 2024 HOT ROD AND EARLY MUSCLE

 Synthetic Oils
A formulation of top-quality synthetic bases
and exclusive, high-performance additives
Petroleum Break-In Oil to deliver extra protection, reduced drag,
Available in three viscosities, all capable better fuel mileage, and more horsepower
of eliminating wear from metal-to-metal for street or racing use.
contact in new engines. Not API certified. 1-qt. Bottle (6) 1-qt. Bottles
Case of Case of (6) Description Part No. Part No.
1-qt. Bottle 5-qt. Jug (3) 5-qt. Jugs 1-qt. Bottles 0W-30 LUC10179 LUC10179-6
Description Part No. Part No. Part No. Part No. 5W-20 LUC10082 LUC10082-6
30W LUC10630 LUC10631 LUC10631-3 LUC10630-6 5W-30 LUC10049 LUC10049-6
5W20 LUC11033 LUC11034 LUC11034-3 LUC11033-6 10W-30 — LUC10050-6
20W-50 — LUC10636 LUC10636-3 — 20W-50 LUC10054 LUC10054-6

Engine Break-In Oil Additive TB Zinc Plus Sure-Shift Semi-Synthetic ATF

TB Zinc Plus protects camshaft, lifters, and Base stocks blend with synthetics,
valvetrain during engine break-in – excellent for detergents, and anti-wear agents for longer
flat-tappet camshaft break-in or as an oil additive fluid life and less friction. Withstands high
to prevent premature wear. Add one bottle with temperatures and reduces foaming for
every oil change to increase the zinc content of smooth, precise shifting. 1-quart bottle.
your motor oil. One 16-oz bottle. 1-qt. Bottle Case of (6) 1-qt. Bottles
Part No. Part No.
Description (1) 16-oz. Bottle (12) 16-oz. Bottles
Part No. Part No. LUC10052 LUC10052-6
30W LUC10063 LUC10063-12

Sure Start Premium Starting Fluid

Type F Semi-Synthetic High ether blend with upper cylinder lubricant
Automatic Transmission Fluid helps start stubborn engines down -65°F.
Specially blended fluid is ideal for racing Suitable for all gasoline and diesel engines.
applications where a quick, positive shift is Sold in 10.7-oz. aerosol can.
required. Fluid includes anti-wear, anti- (1) 10.7-oz. Can Case of (12) 10.7-oz. Cans
oxidants and corrosion inhibitors, and Part No. Part No.
LUC11238 LUC11238-12
resists shear thinning under heat and stress.
1 Case of
Description 1-qt. Bottle (6) 1-qt. Bottles
Type F Automatic Transmission Fluid LUC11020 LUC11020-6
Slick Mist Ceramic Speed Wax
A professional-quality UV-resistant paint
sealant and protectant, Slick Mist Ceramic
Tire Inflator Speed Wax can be used on exterior painted
Non-flammable tire inflator and sealer surfaces, as well as glass, chrome, and even
will quickly seal punctures and re-inflate a vinyl wraps, aluminum, and matte finishes.
damaged tire. 16-oz. aerosol can with hose Provides a super-glossy appearance with
applicator. long-lasting results. Overspray will not harm
rubber or plastic trim. Sold in 24-oz. trigger-
(1) 16-oz. Can Case of (12) 16-oz. Cans pump spray bottle.
Part No. Part No.
LUC11180 LUC11180-12 (1) 24-oz. Bottle Case of (6) 24-oz. Bottles
Part No. Part No.
LUC11294 LUC11294-6

Red‘N’Tacky Grease
Especially good for sliding surfaces and open gears, Lucas Red’N’Tacky Grease contain a high level of extreme
pressure additives to give it a TRUE Timken load much higher than other greases of this type. Water-resistant
formula contains a rust and oxidation inhibitor for excellent mechanical stability and a long storage life.
14-oz. Cartridge Case of (30) Cartridges
Part No. Part No.
LUC10005 LUC10005-30

2023 - 2024 HOT ROD AND EARLY MUSCLE 299

 Pure Synthetic Oil Stabilizer
Formulated for racing use with synthetic oil,
Hot Rod and Classic Pure Synthetic oil stabilizer reduces friction
and wear in engines, transmissions and
Vehicle Motor Oils differentials for increased horsepower and
Perfect for the Hot Rod and fuel mileage.
Classic vehicles crowd, this
Case of (12) Case of (4)
formula offers an increased 1-qt. Bottle 1 Gallon Jug 1-qt. Bottles 1-Gallon Jugs
zinc value of 2100 PPM. Because Part No. Part No. Part No. Part No.
many of these very special LUC10130 LUC10131 LUC10130-12 LUC10131-4
machines often spend long
periods (all winter, for example, Upper Cylinder Lubricant
in same parts of the country) Formulated for gas or LPG engines, special
off the roads, a number of additive cleans and lubricates the entire fuel
the components of the additive package used in Lucas' system using a high-detergent action.
Marine oils to provide rust and corrosion protection have 5.25-oz. Bottle Case of (24) 5.25-oz. Bottles
been included in this unique formula. Not API certified. Part No. Part No.
LUC10020 LUC10020-24
Case of (6) Case of (3)
1-qt. Bottle 1-qt. Bottles 5-qt. Jug 5 -qt. Jugs
Description Part No. Part No. Part No. Part No. Octane Booster
10W-30 LUC10687 LUC10687-6 LUC10679 LUC10679-3
10W-40 LUC10688 LUC10688-6 LUC10683 LUC10683-3
A genuine performance enhancer that
20W-50 LUC10689 LUC10689-6 LUC10684 LUC10684-3 eliminates spark knock and dieseling.
Suitable for fuel-injected, carbureted,
High Mileage Oil Stabilizer throttle body, rotary, or turbocharged
engines. Equally safe for oxygen sensors
Designed to eliminate the noise, emissions, and
or catalytic converters. One bottle treats
oil consumption common in worn, high-mileage
up to 25 gallons of fuel.
engines, oil stabilizer mixes with engine/
transmission oil in a 1:4 ratio. Effectively fights Case of (24) Case of (12)
5.25-oz. Bottle 5.25-oz. Bottles 15-oz. Bottle 15-oz. Bottles
off sludge, raises oil pressure, and lubricates Part No. Part No. Part No. Part No.
all internal parts. Sold in one-quart bottles or LUC10930 LUC10930-24 LUC10026 LUC10026-12
cases of 12 bottles.
1-qt. Bottle Case of (12) 1-qt. Bottles
Part No. Part No. Power Steering Stop Leak
LUC10118 LUC10118-12
Put an end to leaks and add new life to old rack
and pinion units. Compatible with all power
steering fluids. 12-oz. bottle.
Heavy-Duty Oil Stabilizer 12-oz. Bottle Case of (12) 12-oz. Bottles
Formulated to eliminate dry starts, resist Part No. Part No.
thermal breakdown and reduce smoke, leaks, LUC10008 LUC10008-12
knocks, and blow-by. May also be used in
transmissions, differentials, and transfer cases
to reduce heat and noise. Penetrating Oil Aerosol
Case of (12) Case of (4) Superior low-odor penetrant formula dissolves
1-qt. Bottle 1-Gallon Jug 1-qt. Bottles 1-Gallon Jugs corrosion and rust without drying, and leaves
Part No. Part No. Part No. Part No.
LUC10001 LUC10002 LUC10001-12 LUC10002-4 a microscopic film that rustproofs for up to a
year, indoors or out. Fortified with anti-seize
agents, it even protects against salt water.
Engine Oil Stop Leak Sold in 11-oz. flip-up tube aerosol can or cases
of 12 cans.
Compatible with petroleum, semi-synthetic,
and full-synthetic motor oils, engine oil stop 11-oz. Can Case of (12) 11-oz. Cans
Part No. Part No.
leak renews worn seals, raises oil pressure, LUC11043 LUC11043-12
and reduces engine noise and oil consumption.
Contains no harmful solvents to damage or Assembly Lube
corrode seals or engine components.
Use as an initial lubricant for metal surfaces. It
Case of (12) Case of (4) mixes with oil and will not plug filters. Clings to
1-qt. Bottle 1-Gallon Jug 1-qt. Bottles 1-Gallon Jugs
Part No. Part No. Part No. Part No. all surfaces and is an excellent rust inhibitor,
LUC10278 LUC10279 LUC10278-12 LUC10279-4 especially for items in long-term storage. Use
whenever torque or tension are applied. 8-oz.
bottle.
8-oz. Bottle Case of (12) 8-oz. Bottles
Part No. Part No.
LUC10153 LUC10153-12

300 2023 - 2024 HOT ROD AND EARLY MUSCLE

 Slick Mist Tire & Trim Shine
80/90 and 85/140 Plus Gear Oils Water-based, pH-neutral solution restores
Anti-wear and anti-seize agents lengthen tires, bumpers, and trim to look new. Use on
component life and reduce power draw. rubber, plastic, leather, and vinyl. UV additives
“Climbing” additives resist breakdown and blend protect exterior trim and tires and the product
with synthetics. 85/140 Plus will stop leaks and leaves no oily residue. Pleasant citrus scent,
reduce lash in worn gears. 24-oz. bottle.
1-Gallon Case of (12) Case of (4) 24-oz. Bottle Case of (6) 24-oz. Bottles
1-qt. Bottle Jug 1-qt. Bottles 1-Gallon Jugs Part No. Part No.
Description Part No. Part No. Part No. Part No. LUC10513 LUC10513-6
85/140 LUC10042 LUC10045 LUC10042-12 LUC10045-4
85/90 LUC10043 LUC10046 LUC10043-12 LUC10046-4 Metal Polish
Metal polish cleans, polishes and protects
75/90 and 75/140 Synthetic Gear Oils aluminum and other metals. It has built-in
Synthetic, non-foaming oil has additives to resist enhancement elements that keep the treated
“squeezing out”. Formulated specifically for surface from fading, oxidizing, or tarnishing.
high-performance use. Available in 75/90 and Get maximum luster with minimum effort. Sold
75/140 grades to maintain lubricity under extreme in 16-oz. bottle.
temperatures. 16-oz. Bottle Case of (12) 16-oz. Bottles
1 -qt. 1-Gallon Case of (12) Case of (4) Part No. Part No.
Bottle Jug 1-qt. Bottles 1-Gallon Jugs LUC10155 LUC10155-12
Description Part No. Part No. Part No. Part No.
75/90 LUC10047 LUC10048 LUC10047-12 LUC10048-4
75/140 LUC10121 LUC10122 LUC10121-12 LUC10122-4
Transmission Fix
Stops slipping, hesitation, and rough shifting,
eliminates leaks and lowers operating
Slick Mist temperatures. May also be used for preventive
Slick Mist is a polymer paint gloss intensifier maintenance. 24-oz. bottle.
which can also be used on glass, chrome, and
vinyl decals. Use as a traditional wax, quick 24-oz. Bottle Case of (12) 24-oz. Bottles
Part No. Part No.
detail spray, or spray on vehicle before drying LUC10009 LUC10009-12
for the easiest polish job ever. Just spray on
wet or dry surface then wipe off for a slick, Super Coolant
shiny, long lasting and protective finish.
Super Coolant has been scientifically formulated
24-oz. bottle.
to provide the ultimate protection in automotive
24-oz. Bottle Case of (6) 24-oz. Bottles and racing cooling systems. It protects the entire
Part No. Part No.
LUC10160 LUC10160-6 system from rust, corrosion, and electrolysis
including aluminum. Prevents deposits that
can cause overheating, and has been proven to
reduce coolant tempoeratures up to 20°F. Lower
Slick Mist Combo Detailing Kit cylinder head temperatures means advanced
The detailing kit includes all ignition and more horsepower. For street vehicles
three Slick Mist products; (1) requiring freeze protection, add one bottle to
24-oz. bottle of Speed Wax, 50/50 mix. For racing and high-performance
(1) 24-oz. bottle of Interior applications, add two bottles to straight water
Detailer, (1) 24-oz. bottle of coolant for maximum temperature reduction.
Mist Tire and Trim Shine, a
microfiber towel, and a tire 16-oz. Bottle Case of (12) 16-oz. Bottles
Part No. Part No.
sponge in a POP display box. LUC10640 LUC10640-12
Part No Description
LUC10558 Slick Mist Combo Detailing Kit, Each Safeguard Ethanol Fuel
LUC10558-4 Slick Mist Combo Detailing Kit, 4-Pack
Conditioner and Stabilizer
Slick Mist Interior Detailer Safeguard was developed specifically to address
issues associated with using ethanol-based fuels
Water-based, pH neutral solution restores interior to like
and includes effective additives to prevent rust
new condition. Use on rubber, plastic, leather
and corrosion. Specialized additive is designed
and vinyl. Applies easily and leaves no heavy,
for use with E-10, E-15, E-85, pure ethanol, and
oily residue. UV additives prevent cracking and
other mixtures. A single 16-oz. bottle treats up to
fading. Pleasant piña colada smell.
80 gallons of ethanol fuel.
24-oz. bottle.
16-oz. Bottle Case of (12) 16-oz. Bottles
Case of (6) Part No. Part No.
24-oz. Bottle 24-oz. Bottles
Part No. Part No. LUC10576 LUC10576-12
LUC10514 LUC10514-6 2-oz. Bottle Case of (18) 2-oz. Bottles
Part No. Part No.
LUC10929 LUC10929-18

2023 - 2024 HOT ROD AND EARLY MUSCLE 301

 Brake Parts Cleaner
Effectively removes brake fluid, grease, brake
Power Steering Fluid dust, and other contaminants from brake linings,
Formulated using special base oils and a unique pads, springs, and drums without leaving any
additive package to maintain smooth power residue. Safe for use on all disc and drum brake
steering operation, while preventing wear and systems, including ABS. 50-state compliant and
leaks. Sold in 12-oz. or one-quart bottles, and in label compliant with GHS regulations.
cases. Case of (12)
14-oz. Spray Can 14-oz. Spray Cans
12-oz. Case of (12) 1-qt. Case of (6) Part No. Part No.
Bottle 12-oz. Bottles Bottle 1-qt. Bottles
Part No. Part No. Part No. Part No. LUC10906 LUC10906-12
LUC10823 LUC10823-12 LUC10824 LUC10824-6
Multi-Purpose Parts Cleaner and Degreaser
Brake Fluid Deposits such as gum, varnish, oil, brake fluid,
A high-quality blend of polyethylene glycol and grease, dirt, and sludge can result in loss of
special additives, which combine to provide power, rough idle, high emissions, and hard
a product that meets or exceeds industry starting. Lucas Multi-Purpose Parts Cleaner
minimum standards. Fluid prevents seal and Degreaser uses advanced polyretheramine
hardening and softening, while protecting (PEA) detergents to remove deposits from
against rust and corrosion. Fully compatible carburetors, chokes, brake calipers, rotors, air
with all types of brake fluids. Sold in 12-oz. or intakes, throttle bodies, and unpainted metal
one-quart bottles, and in cases. parts. 50-state VOC-compliant formula does not
12-oz. Case of (12) Case of contain CFCs or chlorinated solvents, and will
Bottle 12-oz. Bottles 1-qt. Bottle (12) 1-qt. Bottles not harm catalytic converters or oxygen sensors.
Description Part No. Part No. Part No. Part No. Fast-drying spray is even suitable for cleaning
DOT 3 Brake Fluid LUC10825 LUC10825-12 LUC10826 LUC10826-12
brake parts for improved performance. Sold in 12-oz.
DOT 4 Brake Fluid LUC10827 LUC10827-12 — —
spray can, and in cases of 12 cans.
Case of (12)
16-oz. Spray Can 16-oz. Spray Cans
Part No. Part No.
LUC11115 LUC11115-12

Front Runner Tire

M & H Racemaster bias-ply front
runner tires have a street-legal tread
design and a DOT certification. Black
sidewall.
Part No. Size T.W. S.W Cir. Rim
MHTMSS-021 3.5/22-15 4.0 5.5 69.5 4.0
MHTMSS-022 3.6/24-15 4.0 6.2 74.9 4.0
MHTMSS-017 4.5/26-17 4.5 6.0 81.7 4.0

Drag Slicks
M & H Racemaster drag slicks for
front-wheel drive import, sport
compact, rear-wheel, and all-wheel Radial Drag Tires
drive applications. The HB11 rubber M & H Racemaster tubeless,
compound is very soft to provide radial drag tires are street legal
maximum traction for race cars and DOT Certified.
weighing 3500 pounds or less.
Part No. Size T.W. S.W Dia. Cir. Rim
Light or moderate burnouts are MHTROD-16 275/60R-15 9.5 10.9 28.0 88.0 8.0
recommended. Tube type. MHTROD-19 275/50R-17 9.5 10.5 28.0 88.0 11.0
Part No. Size Comp. T.W. S.W Cir. Rim MHTROD-20 325/45R-17 11.3 12.6 28.0 88.0 12.0
MHTMHR-004 8.0/23.0-13 HB11 8.0 10.0 72.5 8.0 MHTROD40 305/35R-20 11.0 12.0 28.6 90.0 11.0
MHTMHR-025 8.5/24.5-15 HB11 8.5 10.0 77.0 8.0 MHTROD41 305/40R20 9.0 10.6 28.6 90.0 10.0
MHTMHR173 10.5/28-17 704 10.5 11.7 88.8 10.0 Front
MHTMHR174 10.5/28-18 704 10.0 11.5 88.0 10.0 MHTROD-11 185/55R-17 5.0 6.6 26.0 81.7 5.0

302 2023 - 2024 HOT ROD AND EARLY MUSCLE

 Axle Straps

Part No. Description

MTD121724 24", Black
MTD121736 36", Black

Pro Pack Combination Axle Straps

Includes (4) 10K MTD121409
2" ratchet straps, 2" x 8'. Black.
(4) 10K axle straps, (4) strap wraps, (4) protective fleece
sleeves, and a large paddled duffle bag.
Part No. Description
MTD511618 24" Axle Straps and Direct Hook Ratchet, 8' Length, Black
40" Through-the-Wheel Straps and Direct Hook Ratchet,
MTD511658
8' Length, Black

Ultra Pack with Strap Wraps

Direct Hook MTD416007
Perfect for
Ratchet organizing straps,
MTD511218 tarps, extension
Includes (4) 10K 8'L x cords, air hoses,
2" ratchet straps, (4) and more.
10K 24" axle straps, Webbing with Velcro˜ backing and square ring features
(4) strap wraps, and a an embossed rubber pull handle for easy release. For 2"
Mac's black duffle bag. Black. straps only.

Protective Fleece Sleeves

Super Pack The ultimate protection for fine
finishes. The sleeve features
integrated foam padding.
Velcro™ closure secures over
2" webbing.
Part No. Length
MTD416002 20"
MTD416006 32"

1" Soft Loops

Perfect addition
MTD511118
to a ratchet or cam
buckle strap.
Includes (4) 10K 2" combination axle straps, (4) strap Part No. Length
wraps, and a Mac's black duffle bag. MTD111218 18", Pair
Part No. Length MTD111224 24", Pair
MTD511118 With Direct Hook Ratchet, 8' Length, Black
MTD511218 With Twisted Hook, 8' Length, Black VersaTie™ Anchor Plate
Assembly Four Pack
MTD520415
They are as slick as they are
secure. Take the ring out, and
2" Ratchet Straps you have a low-profile round
anchor plate that won't get
in the way of other loads.
Slide the ring in and you are ready for a 1,000 pound load!
Part No. Description
Perfect for hauling motorcycles, carts, and just about
MTD121108 Ratchet Strap with Flat Snap Hook, 2" x 8' anything else that fits in the back of a truck! Comes with
MTD121009 Ratchet Strap with Direct Hook, 2" x 8' 4-pack and 1-1/2" stainless hardware.

2023 - 2024 HOT ROD AND EARLY MUSCLE 303

VersaTie™ Track Kits Soft-Touch Tow
They are convenient all-in-one track MTD522148
Point
packages. Provide everything
from the tack to the single MTD123800
stud tie-down rings as well Manufactured from
as stainless steel fastener 10,000-lb. webbing, this bolt-on polyester strap is 11-
sets for the precision 13/16" long and has a 7/16" steel mount. Made in USA.
drilled and countersunk
mounting holes. Mac’s Pads
Part No. Description Protect trailers
MTD522112
1' Track Kit Includes (2) Single Stud Tie-Down Rings, and cargo during a
1/4" x 1-1/2" Stainless Fasteners standard tie-down
2' Track Kit Includes (2) Single Stud Tie-Down Rings,
MTD522124
1/4" x 1-1/2" Stainless Fasteners
situation. The
4' Track Kit Includes (4) Single Stud Tie-Down Rings, durable rubber pads
MTD522148 literally grip the load,
1/4" x 1-1/2" Stainless Fasteners
adding stability when
VersaTie™ Connectors hauling cargo or
Provides fast, secure tie-down other types of loads.
points at one-inch increments in Made in the USA.
any profile of VersaTie™ track. MTD310004 Part No. Length
The easy-to-use fasteners can MTD700020 6” x 6”, 4-Pack
MTD700021 12” x 12”, 4-Pack
be quickly positioned along tracks anywhere they are
MTD700022 (4) 6” x 6”, (4) 12” x 12”, Mega Pack
needed.
Part No.
MTD310001
Length
Single Stud Tie-Down Ring, Rotates 360°
Monkey Face Anchor Point
MTD310004 Double Fitting with Pear-Shaped Ring MTD712000
MTD310015 Single Hook, Nylon Composite, 75-lb. Capacity The Monkey Face is a drop-in, stake
pocket multi-mount, designed to
Canopy/Awning Cinch Tie-Down Straps receive all Mac's tie-down end-
A cinch style tie down fittings. Laser-cut from 0.375"
strap constructed with steel and welded to a 0.1875" thick
high-strength webbing steel tube, the Monkey Face has
offering a soft cordura 10,000-pound minimum breaking
line loop at one end and an strength. Simple to use: just slide the Monkey Face into
easy-release ratchet at the the stake pocket and secure it with the included linchpin.
other. 100,000 lb. minimum Without low-profile lashing winch.
breaking strength rating.
12 ft. long. Made in the Spinnaker End
USA.
Part No. Description
MTD632301
MTD121532 Strap Only Cast aluminum
MTD121940 Strap with Tent Stake, Stake Fitting, & Strap Wrap construction. Designed
4-Pack, Straps, Stakes, Fittings, $ Strap Wraps, Includes to fit 2” x 3” x .125”
MTD511003
Storage Bag diameter tubing with
internal cable routing.
Gusseted Pad Eye Ring
MTD471002 Floor Jack Cradle
Tig-welded stainless-steel MTD700001
construction with four mounting Secures jack on trailer
holes. Overall size: 2” x 4”. floor when on the
road. Made from tough
elastomer, the mounts
will fit most floor jacks.

304 2023 - 2024 HOT ROD AND EARLY MUSCLE

Universal Stainless Steel Mufflers Stainless Steel Catalytic Converters
Available with a fully polished or satin finish stainless steel case,
MagnaFlow Universal Mufflers feature a straight-through, 16"
wide-open design. All have a lifetime warranty. 12"

4" x 9" Oval Polished Stainless Steel

20"
14"
Part No. Inlet/Outlet
4" x 6-1/2" No Air Tube Stain Body
MAG94005 2.25"
MAG94006 2.5"
MAG94009 3"

Inlet/
Part No. Outlet
14" Offset/Center Universal Satin Finish
MAG14326 2.5"
Stainless Steel Mufflers
5" x 8" Oval Stainless Steel 4" x 9" Oval
24"
20" 20"
18"
Part No. Inlet/Outlet 14" 14"
18" Dual/Dual
MAG12468* 2.25" Dual
* Trux-X Perforated

Part No. Inlet/Outlet Part No. Inlet/Outlet

5" x 8" Oval Polished Finish 14" Center/Center 14" Offset/Offset
20" MAG11215 2.25" MAG11235 2.25"
14" MAG11216 2.5" MAG11236 2.5"
Part No. Inlet/Outlet
MAG11219 3"
14" Offset/Offset
MAG14239 3"
20" 24"
14" 18"

5" x 11" Oval Stainless Steel

28"
22"
Part No. Inlet/Outlet
22" Center/Offset Part No. Inlet/Outlet Part No. Inlet/Outlet
MAG12589 3" 14" Offset/Center 18" Offset/Center
MAG11225 2.25" MAG11255 2.25"
MAG11226 2.5" MAG11256 2.5"
MAG11229 3"

Round Polished Stainless Steel 5" x 11" Oval Satin Finish

20" 20"
14" 20"
14"
14"
Part No. Inlet/Outlet
14" Center/Dual
MAG12580 2.5" 2.25"

Inlet/ Inlet/
Part No. Outlet Part No. Outlet
4" Center/Center 6" Offset/Center
MAG14416 2.5" MAG14619 3"
4" Round Satin Finish
MAG14419 3"
20"
12"
14"
6"

Inlet/ Part No. Inlet/Outlet

Part No. Outlet 14" Center/Center
6" Center/Center MAG10444 2" 2"
MAG14156 2.5"

2023 - 2024 HOT ROD AND EARLY MUSCLE 305

XL Mufflers Multi-Chamber Stainless Exhaust Kits
Wide-open polished mufflers
4" x 9" 3-Chamber and mandrel-bent pipes
with OEM-barbed hangers
20" 20"
14" 14"
can be installed with no
modifications. Kits include
hardware and a polished,
double-wall stainless steel
tip to prevent long term
discoloration.
Part No. Year/Model Engine Tubing Tip
Part No. Inlet/Outlet Part No. Inlet/Outlet
Chevrolet
14" Center/Offset 14" Offset/Offset
MAG16643 1967-72 C10 Pickup Crossmember Back V8 2-1/2" Dual
MAG13219 3" MAG13239 3"
MAG15894 1968-73 Chevelle/Malibu V8 2-1/2" Dual
MAG15898 1968-73 Chevelle/Malibu V8 3" Dual
MAG15893 1964-67 Chevelle/Malibu V8 2-1/2 Dual
Glass Pack Mufflers MAG15896 1967-69 Camaro with Tru-X Crossover V8 2-1/2" Dual
MAG15899 1967-74 Camaro with Tru-X Crossover V8 3" Dual
SMALL MEDIUM LARGE MAG16842 1968-73 Corvette Crossmember Back V8 2.5" Dual
22" 26" 30" MAG16724 1961-64 Impala Crossmember Back V8 2.5" Dual
18" 22" 26" MAG15896 1968-73 Nova V8 2-1/2" Dual
MAG15894 1970-73 Monte Carlo V8 2-1/2" Dual
MAG15898 1970-73 Monte Carlo V8 3" Dual
Ford
MAG15816 1967-70 Mustang with Tru-X Crossmember V8 2-1/2" Dual
Proudly made in the USA, Magnaflow glass pack MAG15815 1964.5-66 Mustang V8 2-1/2" Dual
mufflers utilize a straight-through design for increased Oldsmobile
horsepower and a true performance sound. Mufflers are MAG15894 1968-73 Cutlass with Tru-X Crossmember V8 2-1/2" Dual
robotic CNC welded and are constructed using a non- MAG15898 1968-73 Cutlass with Tru-X Crossmember V8 3" Dual
fiberglass acoustic packing material. Offered in small, MAG15893 1964-67 Cutlass with Tru-X Crossmember V8 2-1/2" Dual
medium, and large case designs. Pontiac
MAG15894 1968-73 GTO with Tru-X Crossmember V8 2-1/2" Dual
Body Overall MAG15898 1968-73 GTO with Tru-X Crossmember V8 3" Dual
Part No. In/Out Length Length Diameter MAG15893 1964-67 GTO with Tru-X Crossmember V8 2-1/2" Dual
Small Case Mufflers
MAG15897 1964-67 GTO with Tru-X Crossmember V8 3" Dual
MAG18124 2"/2" 18" 22" 3-1/2"
MAG15896 1967-69 Firebird with Tru-X Crossmember V8 2-1/2" Dual
MAG18125 2-1/4"/2-1/4" 18" 22" 3-1/2"
MAG15899 1967-74 Firebird with Tru-X Crossmember V8 3" Dual
MAG18129 3"/3" 18" 22" 4"
Medium Case Mufflers
MAG18134 2"/2" 22" 26" 3.5"
MAG18135 2-1/4"/2-1/4" 22" 26" 3.5" Stainless Steel
Large Case Mufflers
MAG18145 2-1/4"/ 2-1/4" 26" 30" 3-1/2" Tru-X Crossovers and Y-Pipes
MAG18146 2-1/2"/2-1/2" 26" 30" 4"

Part No. Inlet Outlet Length

Tru-X Crossovers
MAG10791 2 x 2-1/2" 2 x 2-1/2" 12"
MAG10792 2 x 3" 2 x 3.0" 14"
Y-Pipes
MAG10768 2 x 2-1/2" 2-1/2" 10"
MAG10798 2 x 3" 3" 10-1/4"

Universal Catalytic Converter

American engineered and manufactured,
the MagnaFlow catalytic converter
offers the highest standards of
product performance and efficiency
in the industry. Not legal for sale or
installation in California.
Part No. Description
MAG99006HM Chevy, Dodge, Ford, Oldsmobile, Plymouth

306 2023 - 2024 HOT ROD AND EARLY MUSCLE

Small Block Chevy "Ultra" Serpentine Kit for
“Sport Track”
Standard Rotation Long Water Pump
Kit includes crank
Serpentine Systems
pulley, water pump Designed for the budget-
pulley with nose cover, minded engine builder,
alternator pulley and Sport Track Serpentine
fan with nose cover Systems come with crank
and power steering and water pump pulleys
kit with brackets and and a strong, compact,
pulley. Since it works one-piece combination
with standard rotation and economically finished
pumps, the kit is ideal 6061-T6 aluminum
for mid-1950s and 1960s alternator and A/C bracket,
Chevys and 1969 and later Camaros and Novas. a 105-amp alternator,
Sanden A/C pump, water
Saginaw pump, and mounting
Water Keyway Saginaw Press Fit
Part No. Alternator Pump P/S Pump P/S Pump hardware. Kits with power
Performance Series (Increases Horsepower) steering include a power
MPP22020 X X X — steering pump, power steering pulley, and mounting
MPP22030 X X — X hardware. The serpentine belt system eliminates belt
High Water Flow Kits (Increases Cooling) throwing and the larger crank pulley improves cooling and
MPP22050 X X X —
electrical system charging at low speeds.
Note: March offers many other items, including pulley kits for long water pump, serpentine
pulley systems for Chrysler, Ford, and Chevy, and specialized brackets. Call for details. Water Remote Canister
Part No. Color Alternator A/C
Pump P/S Style P/S
Small Block Chevy - Long Water Pump
Small Block Chevy "Ultra Drive" (Standard Rotation)

Serpentine “Front Mount” Kit MPP21690-08 Black X X X — X

MPP21690-09 Silver X X X — X
MPP20260
Mount accessories MPP21695-08 Silver X X — — X
below the valve covers
and within the width of “Pro Track” Serpentine System
the cylinder heads. A MPP20035
complete package that
Designed for
will work on Ram Jet
use on high-
and tuned-port as well
performance
as single and multiple
Chevy LS-based
carb setups. Includes
hot rod and street
Sanden compressor, alternator, aluminum water pump,
rod applications.
Type 2 power steering pump, OEM tensioner, all brackets,
CNC-machined
P/S housing cover, crank pulley, water pump pulley with
with clear
fairing and nose cover, alternator pulley with fan and
powder coat,
nose cover, and polished A/C lines. All components are
with no polishing
polished billet aluminum and clear coated.
required.
High Water Flow A/C Kits - Driver's Side
The kit includes
Alternator (Increases Cooling)
an aluminum
Alternator Water Pump A/C Power Steering water pump, 140-amp alternator, alternator pulley with
X X X X
fan and nose cover, Sanden A/C unit and bracket, Type
II power steering pump, power steering pulley and nose
Small Block Ford “Ultra 2” Mid Mount Pulley Kit cover, crank pulley, idlers, and mounting hardware. Made
This billet aluminum in USA.
bracket and serpentine Note: LS3 requires water pump backing plate hardware to be changed. Call for specs. Will not
pulley kit is designed to work with Variable Valve Timing (VVT). Also requires additional hub for mounting crank pulley.
work with carbureted
Alternator Water Pump A/C P/S
and fuel injected X X X X
applications. The
alternator mounts
high on the passenger
side with the powers
steering pump and A/C
compressor are mid-
mounted allow for a reverse rotation water pump. Fits
Ford 289-302, 351W powerplants.
Part No. Description
MPP35127 With Saginaw P/S Pump

2023 - 2024 HOT ROD AND EARLY MUSCLE 307

“Style Track” Serpentine Serpentine Conversion Pulley Kits
Systems Performance Series
The “Style Track” serpentine serpentine pulley kits replace
systems are designed with low stock V-belts to eliminate
price and style in mind. The belt throwing and retain
one-piece alternator and air the standard rotation water
conditioning bracket provides pump. A 12 to 15-horsepower
a rigid support and a separate increase through reduction
bracket is for power steering. System includes 105- of accessory drag is typical.
amp chrome alternator, alternator pulley with fan and CNC-machined to run
nose cover, matching chrome A/C compressor, A/C perfectly true, pulleys are MPP6210
compressor nose cover, water pump and hardcoated 6061-T6 aluminum for extra
pulley, alternator and A/C bracket, large diameter crank strength and wear resistance and are finished with a
pulley, belt tensioning tool, power steering pump with clear powder coat. Kits includes crank, water pump, and
bracket, and mounting hardware. alternator pulleys.
Part No. Description Part No. Description
MPP21150 Small Block Chevy, SWP, ALT, W/P. A/C, Remote P/S MPP6210 Small Block Chevy, Standard Rotation, Short Water Pump
MPP21250 Big Block Chevy Remote P/S, ALT, W/P, A/C MPP6310 Small Block Chevy, Standard Rotation, Long Water Pump
Camaro/Firebird Balancer, Small Block Chevy, Standard Rotation, Long Water Pump,
MPP355 MPP6330
Block to Face of Balancer is 4.875" Includes P/S Pulley
Note: Hubs are based on factory style balancers, aftermarket balancers may require
modifications to hubs for installation. V-Belt Pulley Sets – Performance Ratio
Performance ratio pulleys
“Style Track Custom” increase horsepower by
slowing down the accessories
Serpentine Systems and reducing drag. A gain of
Affordably priced, this serpentine 12-15 horsepower is typical.
system offers the components as CNC-machined from 6061-
the “Style Track” systems, but with T6 aluminum clear powder
black powder-coated brackets and coated for low maintenance. MPP1630
pulleys and natural finishes on the
Optional
Sanden a/c compressor and 140- Part Crank W/P Alt. Optional P/S Optional
amp alternator. Engine No. Pulley Pulley Pulley P/S Pulley Pulley Alt. Fan
GM
Part No. Description
MPP513 MPP531
Small Block Chevy with Engine Mounted P/S Pump, SBC, LWP MPP6070 2V 1V 1V MPP221
MPP21855-08 (Keyway) (Press)
Includes Saginaw P/S Pump
SBC, SWP MPP6010 1V 1V 1V N/A N/A MPP221
SBC, 71-82 Use OE Use OE
Serpentine Pulley Kits Corvette
MPP5070 3V 2V 1V
Number Number
MPP221
MPP513 MPP531
BBC, LWP MPP7015 2V 1V 1V MPP221
(Keyway) (Press)
MPP30180 MPP513 MPP531
BBC, LWP MPP7020 2V 2V 1V MPP221
(Keyway) (Press)
Pontiac MPP540
MPP13030 2V 2V 1V N/A MPP221
350-455 (Keyway)
Ford
SBF,
Performance Series Pulley Kits increase horsepower by 69-1/2-78
MPP1610 1V 1V 1V N/A N/A MPP221
reducing accessory drag. Up to 12-1/2 horsepower at the SBF, MPP504 MPP502
MPP1625 2V 1V 1V MPP221
rear wheels is typical. Helps eliminate troublesome belt 69-1/2-78 (302) (351)
throwing. Kits are designed for normal street driving. SBF,
MPP1630 2V 2V 1V
MPP504 MPP502
MPP221
69-1/2-78 (302) (351)
Steel Pulley sets run perfectly true. Pulleys are iron Mopar
phosphate dipped prior to being gloss black powder MPP530 MPP531
SBM, 318-360 MPP10250 2V 1V 1V N/A
coated for corrosion protection. (Keyway) (Press)
BBM, 383- MPP530 MPP531
Aluminum Pulley sets are machined from 6061-T6 billet 440
MPP10050 2V 2V 1V
(Keyway) (Press)
N/A
aluminum for extra strength and wear resistance, hand
polished, and protected by a clear powder coat.
Water Alternator
Crank Pump Alternator Pulley w/
Part No. Description Pulley Pulley Pulley Cover
Performance Series Pulley Kits
1969-1/2 - Later Ford 289-302 4-Bolt Damper, Drivers Side Lower Radiator
Hose Water Pump
MPP30180 3-Pc. Alum. Kit Yes Yes — Yes
1979-93 Ford Mustang 5.0L
Non-Rib
MPP2010 3-Pc. Alum. Kit 4-3/8" — 2-3/8"
5-1/2"

308 2023 - 2024 HOT ROD AND EARLY MUSCLE

V-Belt Pulley Sets – V-Belt Power Steering Pulleys
High Water Flow Ratio Pulleys are clear powder-coated polished aluminum.
MPP6170
High-water flow ratio pulleys
target cars that spend more time
at lower speeds cruising or have
cooling issues by speeding up
the water flow and fan speed.
CNC-machined from 6061-T6
aluminum, clear powder coated
for low maintenance. “B” “C” “D” “E” “F”
Crank W/P Alternator Optional Optional Optional “A” Key 1st 2nd O.D. 1st 2nd
Engine Part No. Shaft Way Groove Groove Size Groove Groove
Pulley Pulley Pulley P/S Pulley P/S Pulley Alt. Fan
GM Chevy
MPP513 MPP531 MPP511 3/4" No 1.15" — 5-3/4" — —
SBC, LWP 2V 1V 1V MPP221
(Keyway) (Pulley) MPP513 5/8" Yes 1.05" — 5-3/4" -.300" —
MPP520 3/4" No 1.55" 2.175" 5-3/4" — —
MPP521 5/8" Yes 1.07" 1.690" 5-3/4" -.320" -.940"
MPP522 3/4" No 1.35" 1.960" 6" — —
Ford
Fans and Pulley Covers MPP502 11/16" No 1.336" — 5-1/2" — —
Part No. Description
Footnotes
MPP221 Alternator Fan, Fits GM/Ford
A Bore
MPP314 Water Pump Pulley Cover, Fits GM Serpentine
B Face to center of first groove
MPP360- Pulley Cover, Fit March Pulleys, Black Powder Coat
08 Billet Aluminum C Face to center of second groove
MPP395 A/C Clutch Cover, Fits Sanden 508 Compressor D Diameter of stock pulley
Diameter from crank power steering groove to back of power
E
steering pulley shaft
F Same as E (second groove)
Note: Use dimension E and F to find proper pulley if you have a keyway power steering pump
mounted to the engine and no pulley.
Small Block Chevy “Low Mount”
Power Steering Pumps MPPP304
Alternator Bracket Part No. Description
MPP20215 MPPP300
GM Saginaw Canister Style Pump
CNC-machined aluminum with a Keyed Shaft
GM Saginaw Canister Style Pump
bracket fits small block Chevys MPPP304
with Keyed Shaft, Chrome
with short water pumps. High- Pressure Regulator Kit, Allows
strength stainless steel tensioning rods with chrome MPPP306 Regulation of Pressure to Rack
moly rod ends assure perfect fit and alignment. Bracket or Gear Box
must be used with an alternator having 6 and 12 o'clock
mounting positions. Billet Remote
Power Steering Reservoir
Small Block Chevy High Performance
MPP450
Alternator Brackets Machined aluminum reservoir for Type 2 power
CNC-machined aluminum brackets provide steering pump is clear powder coated for easy
perfect belt alignment on serpentine or cleaning. Mounting bracket is included.
V-belt small block Chevy applications.
Outward mount bracket kit is ideal
for wide-bodied, low-hood 1955-up Big Block Chevy
applications. Front Mounted Power Steering Bracket
Part No. Description MPP20150
MPP20120 Small Block Chevy Alternator Bracket, Long Water Pump
The perfect replacement for
Small Block Chevy Outward Mount Alternator Bracket,
MPP20130
Short Water Pump wrap-around or header-mount
power steering brackets on
long water pump, big block
Small Block Chevy Front Mounted Chevys with 1966-78 Saginaw
Power Steering Brackets power steering pumps.
A perfect replacement for wrap-around or Compatible with V-belt or
header-mount power steering brackets. serpentine set-ups.
Available for early and late-style small
block Chevy V8s.
Part No. Description
MPP20160 1966-76 Upper and Lower Bracket Kit, Saginaw Pumps

2023 - 2024 HOT ROD AND EARLY MUSCLE 309

Big Block Chevy High-Performance Small Block Ford 5.0L Adjustable
Alternator Brackets Alternator Bracket Kit
Billet aluminum brackets MPP1465-09
provide perfect belt alignment Kit also includes stainless steel
for big block Chevy V-belt or adjusting rod, chrome moly rod
serpentine setups. Includes end and mounting hardware for
stainless steel tensioning rods serpentine or V-belt set-ups.
and chrome moly rod ends.
Part No. Description
MPP20125 Long Water Pump
MPP20135 Short Water Pump

Small Block Ford 5.0L A/C and Power Steering Eliminator Bracket
MPP1460-09
Bracket can eliminate up to 45 pounds, improving front-to-rear weight transfer for better traction
(for serpentine applications). Bracket helps clean up engine compartment, mounts between water
pump and power steering pump and includes hardware. Requires 1986-93 Mustang tensioner.

Semi-Syn Motor Oils Performance Break-In

High-performance oil is a complex Motor Oils
blend of highly refined base stocks and Engineered specifically for the critical
a complex blend of synthetic esters that break-in process, lubricant includes
protects critical engine components an elevated high zinc/phosphorous
beyond conventional oils. Semi-Syn formula that is blended with pure
is a fully formulated race oil that is petroleum base stocks and anti-wear
compatible with petroleum or synthetic additives. Well suited to flat tappet or
engine oils. High zinc/phosphorous roller camshaft engines, break-in oil
formula is ideal for use in flat tappet or is perfectly balanced and requires no
roller camshaft engines. Sold in 1-quart other additives. Sold in 1-quart bottles,
bottles, gallon jugs, or in cases. 1 gallon jugs, 5 gallon pails, or in cases.
1-qt. Case of (12) Not recommended for street use.
Description Bottle 1 -qt. Bottles) 1-qt. Case of (12)
10W-40 MAX39-34901BS MAX39-34901B Description Bottle 1-qt. Bottles
20W-50 MAX39-35901BS MAX39-35901B 5W16 — MAX39-09901
10W-30 MAX39-10901S MAX39-10901
Case of (4)
Description 1-Gallon Jug 1-Gallon Jugs 15W-50 MAX39-11901S MAX39-11901
10W-40 MAX39-349128BS MAX39-349128B Case of (4)
Description 1-Gallon Jug 1-Gallon Jugs 5-Gallon Pail
15W-50 MAX39-119128S MAX39-119128 MAX39-11505
Performance Motor Oils
High-performance petroleum oil is
formulated using a technologically Pro Gear
advanced additive package that is Full-synthetic, high-performance ester
combined with a blend of highly refined racing gear oil provides unsurpassed
petroleum base stocks. Lubricant performance and protection.
resists mechanical break-down and Lubricant resists shearing, mechanical
viscosity loss, while reducing wear on break-down, and loss of viscosity.
lifters, cams, and bearings. High zinc/ Recommended in any differential where
phosphorous formula is ideal for use in an API GL-5 gear oil is specified. Sold in
flat tappet or roller camshaft engines. 1-quart bottles, gallon jugs, or in cases.
Sold in 1-quart bottles or in cases. 1-qt. Case of (12)
Description Bottle 1-qt. Bottles
1-qt. Case of (12)
Description Bottle 1-qt. Bottles) 75W-90 MAX49-45901S MAX49-45901
10W-30 MAX39-33901S MAX39-33901 Case of (4)
10W-40 MAX39-34901S MAX39-34901 Description 1-Gallon Jug 1-Gallon Jugs
20W-50 MAX39-35901S MAX39-35901 75W-90 MAX49-449128S MAX49-449128

310 2023 - 2024 HOT ROD AND EARLY MUSCLE

RS Series Motor Oils MTL Trans Lube
Full 100% synthetic triple-ester race-grade Engineered for use in high-
oil incorporates an industry-leading additive performance, two-cycle kart
system that provides both maximum transmissions, lubricant prevents
performance and increased protection. clutch slippage and minimizes
Advanced formula uses special anti- wear. Safe for use on aluminum
wear/extreme-pressure additives to or steel clutch plates, MTL offers
provide superior engine protection, exceptional lubrication and
even under extreme loads and peak wear protection to all clutch and
temperatures. Sold in 1-gallon jugs or in transmission components. Sold in
cases. Not recommended for street use. 1-liter bottles or in cases.
Case of (4)
Description 1-Gallon Jug 1-Gallon Jugs 1-Liter Case of (12)
Bottle 1-Liter Bottles
10W30 MAX39-019128S MAX39-019128
MAX42901S MAX42901
10W-40 MAX39-169128S MAX39-169128
15W-50 MAX39-329128S MAX39-329128

Multi-Purpose Penetrant Lube

SC1 MPPL is an all-purpose, spray-on penetrating
lubricant that delivers light lubrication, while
Cleans and polishes plastic, fiberglass, and
providing a barrier from rust and corrosion.
painted surfaces. Excellent for use as a clear
Displaces moisture and helps loosen rusted
coat to prevent mud, dirt, and rubber from
fasteners.
adhering to body panels. Sold in 12-oz. aerosol
cans, or in cases. Case of (12)
15.5-oz Aerosol Can 15.5-oz. Aerosol Cans
12-oz. Case of (12) MAX73920S MAX73920
Aerosol Can 12-oz. Aerosol Cans
MAX78920S MAX78920

Speed Wax FFT (Foam Filter Treatment)

All-in-one detailer conditions, shines MAX60916S
and protects painted surfaces, Race proven Foam Filter Treatment
chrome and plastic. Sets-up quickly catches dirt and fine dust without
and easily wipes from smooth restricting air flow. Will not plug foam
surfaces. Sold in 15.5-oz. aerosol cells or migrate off of filter. 16-oz.
cans, or in cases. bottle.
15.5-oz. Case of (12)
Aerosol Can 15.5-oz. Aerosol Cans
MAX70-76920S MAX70-76920

Air Filter Cleaner

Ready-to-use emulsion-type cleaner is
Contact Cleaner designed to thoroughly clean foam or
A blend of cleaning agents that displace moisture, fabric air filters without damaging the
while removing grease, grime, and oil. Heavy- foam, paper, or glue.
duty aerosol cleaner is outstanding for use on
64-oz. Case of (6)
ignitions, spark plugs, electrical components, etc. Bottle 64-oz. Bottles
Sold in 13-oz. aerosol cans, or in cases. MAX70-79964S MAX70-79964
13-oz. Case of (12)
Aerosol Can 13-oz. Aerosol Cans
MAX72920S MAX72920
Fab 1
Spray-on air filter oil delivers unsurpassed
Suspension Clean protection from the elements. 13-oz.
Unique formula makes cleaning aerosol cans.
suspension components quick and easy,
Case of (12)
leaving no residue. Product incorporates 13-oz.Aerosol Can 13-oz. Aerosol Cans
strong industrial cleaners with a powerful MAX61920S MAX61920
spray and will not harm O-rings or seals.
Case of (12)
13-oz.Aerosol Can 13-oz. Aerosol Cans
MAX71920S MAX71920

2023 - 2024 HOT ROD AND EARLY MUSCLE 311

Air Filter Cleaner Assembly Lube
Heavy-duty, emulsion-type cleaner has the Specially formulated to protect highly
ability to clean foam or fabric air filters without loaded engine components during engine
damaging foam cells, paper, or glue. Removes oil, assembly and the break-in period. Sold in
dust, and dirt, and washes out with water. Sold in 4-oz. bottles, or in cases.
15.5-oz. aerosol cans, or 64-oz. containers. 4-oz. Case of (12)
15.5-oz. 64-oz. Case of (6) Bottle 4-oz. Bottles
Aerosol Can Container 64-oz. Containers MAX69-01904S MAX69-01904
MAX79920S MAX70-79964S MAX70-79964

Fuel Enhancer
Air Filter Care Kit Fuel performance enhancer is
Clean and oil air filters quickly and designed to prevent and cure
effectively for increased air flow and problems caused by ethanol,
horsepower. All-in-one two-pack includes due to ethanol's corrosivity
Air Filter Cleaner (15.5-ounce aerosol) and and high affinity for water.
Fab 1 (13-ounce aerosol) spray-on air filter Formulated to prevent water
oil. and ethanol from reaching
2-Pack Case of (6) critical components, stabilize
Kit 2-Pack Kits fuel against oxidation, extend
MAX70-799202S MAX70-799202 fuel life, and prevent corrosion
where water has previously
been introduced. Made in USA.
Street and Off-Road Brake Fluid Part No. Description
DOT 4/DOT 5/DOT 5.1 MAX80-89901S 1-Quart Bottle, Each
High-performance brake and clutch fluid
designed to lubricate and protect critical
brake system components while providing Waterproof Grease
reliable stopping power. Anti-vapor lock High-temperature, multi-purpose
formulation maintains responsiveness lithium grease complex provides
and performance by fighting both water superior lubrication and water
contamination and vaporization. Advanced resistance, and clings to metal
chemistry resists corrosion and oxidation. surfaces even under the most severe
Exceeds the requirements for DOT 3, DOT conditions. Sold in 16-oz. containers,
4, DOT 5, or DOT 5.1 street and off-road or in cases.
applications. 16-oz. Case of (12)
Part No. Description Container 16-oz. Containers
MAX80-81916S DOT 5 16.9-oz. Bottle MAX80916S MAX80916
MAX80-81916 DOT 5, Case of (24) 16.9-oz. Bottles

Syn PSF
(Power Steering Fluid)
Syn PSF is a high-performance, synthetic
power steering fluid that is engineered
to endure the severe stress and high
temperatures common to racing.
Fluid prevents wear, thermal
breakdown, and oxidation.
Case of (12)
1-qt Bottle 1-qt Bottles
MAX89-01901S MAX89-01901

312 2023 - 2024 HOT ROD AND EARLY MUSCLE

Biowash Hi-Test
A biodegradable all-purpose cleaner that Concentrated octane booster readily mixes
removes grime and oil with ease. Tough, yet with all gasolines, alcohol, or nitro mixtures,
gentle on paint, plastic, chrome, anodizing, suppressing detonation and pre-ignition. One
rubber, carbon fiber, etc. Sold in 32-oz. ounce per gallon raises the octane number
bottles, or in cases. of gasoline approximately four points. May
Case of (12) be used in concentrations of one to four
32-oz. Bottle 32-oz. Bottles ounces per gallon of gasoline. Sold in 16-oz.
MAX80-85932S MAX80-85932 containers, or in cases.
Case of (12)
16-oz. Container 16-oz. Containers
MAX83916S MAX83916

Wheel Locks & Lug Nuts

The McGard name has meant quality and safety for over thirty years. Built to last a lifetime, McGard lug nuts and wheel locks
provide long-lasting beauty and the highest level of protection against costly wheel and tire theft. McGard’s triple-nickel
chrome plating is guaranteed for life against rusting, chipping, or peeling. Sold in packs of 4.

Bulge Series Tough Nuts Thread Size

Cone Seat
Locks Lug Nut Bulge Lug Nut

Bulge lug nuts have an extended seating surface 1/2" MCG24130 (2) MCG64000 (2) MCG64010 (1)
that is designed to match the wider seating 7/16" MCG24132 (1) MCG64001 (2) MCG64011 (1)
surfaces used on some aluminum wheels. Bulge 12mm x 1.5 MCG24137 (1) — MCG64012 (1)
lug nuts have a 3/4" hex. 12mm x 1.75 — MCG64019 (2) —
MCG64014 (4)
14mmx 1.5 MCG24210 (4) —
MCG64021 (2)
Cone Seat 14mm x 2.0 MCG24205 MCG64020 —
Cone seat-style wheel locks and lug nuts are * Regular Shank .746" Shank
for use with steel and aluminum wheels with 1/2" — MCG61000 (2) —
exposed chrome lug nuts that are tapered at the 7/16" — MCG61001 (2) —
bottom. * Long Shank .946" Shank
1/2" — MCG62000 (2) —
7/16" — MCG62001 (2) —
Regular Shank * Extra-Long Shank 1.365" Shank
Regular shank lug nuts and wheel locks are for 7/16" MCG23180 MCG63015 (2) —
use with custom replacement cast or forged 1/2" — MCG63014 (2) —
aluminum wheels that are between 9/16" and 7/8" 12mm x 1.5 — MCG63016 (2) —
thick at the stud hole. Warning: When installing wheel locks or lug nuts, verify correct seating surface style (cone, shank,
etc.) and thread size. Also verify that fastener has not bottomed out on wheel stud before tightening
against wheel.
Long Shank
Footnotes
Long shank-style lug nuts and wheel locks are 1 3/4" Hex
for use with custom replacement cast or forged 2 13/16" Hex
aluminum wheels that are at least 7/8" thick, but 3 7/8" Hex
less than 1-1/4" thick at the stud hole. 4 22mm Hex
* Shank Style Nut sets come with washers
Extra-Long Shank
Lug nuts are available to fit extra-long
applications such as Cragar SST, Superlite,
Supertrick, etc. Shank length is 1.365" and shank
diameter is .680". Kits include stainless steel
washers.

2023 - 2024 HOT ROD AND EARLY MUSCLE 313

For over 35 years, Mechman Alternators has been manufacturing high-performance alternators for any and all types
of vehicles. Focused on producing the most reliable and best-performing product in the marketplace, each Mechman
alternator is hand-built in the U.S. and dyno-tested prior to shipment. They offer five different series of products available to
fit any application including drag race, road race, street rod, diesel performance, pro touring, or car audio.
,

S Series
With applications available for a broad range of both domestic and import
vehicles these cast-aluminum, six-phase alternators offer incredible
output in a very compact unit. Highly efficient, the units use less
horsepower than conventional three-phase alternators and are available
with 170-, 240-, or 320-amp ratings. 12 diodes, twin rectifier plates, and twin
cooling fan construction ensures long life in any application or operating
environment.
Part No. Description
1963-85 GM, Single Groove Pulley,
MEC7127170
170 Amp, Internal Regulator, 1-Wire

Hydraulic Clutch Conversion Kits Direct Bolt-In Clutch Master Cylinders

Adjustable master cylinders have a

13/16" bore. Available for 1986-02 LT1/
LS1 with LS-X quick disconnect fitting
or LT-Style roll pin fitting. Threaded mounting studs. All
use stainless AN-4 braided lines.
Part No. Description
MCL139301 1998-02 LS with GM Quick Disconnects
MCL139305 1986-97 TPI/LT-1 with Roll Pin Fitting

McLeod Racing has developed several kits to convert

stock Mustang cable clutches to hydraulic activation.
Benefits include softer pedal effort, smoother clutch
operation, and better clutch performance under
high-speed driving. Kits are self-adjusting and use
braided steel lines for heat resistance around exhaust
components. Two styles are offered: an external slave
cylinder arrangement and one using a hydraulic throw-out
bearing.
Part No. Description
MCL14-325 1979-93 Mustang, Internal Slave Cylinder
MCL14-326 1979-93 Mustang w/External Slave Cylinder

314 2023 - 2024 HOT ROD AND EARLY MUSCLE

 RST Street Twin Clutch Kit

Ball Studs
Part No. Description
Adjustable Ball Stud Assy., 1955-83 GM, Stock/Steel
MCL16908
Bellhousing, Enlarged Head, 1/2"-13 Threads
MCL16909 Adjustable Ball Stud Assy., Mustang with Cable Linkage

The RST is a street clutch that is quiet with minimal pedal

effort, and can easily handle up to 800 horsepower. The
Street Twin is a dual-disc diaphragm-style clutch and
Steel SFI Flywheels the best choice for the street car equipped with nitrous,
Offered in standard or heavyweight, steel supercharger, or turbocharger.
flywheels are engineered for street and Part No. Description
strip duty. Heavier units are ideal for MCL6911-07 GM 1955-85, Lg. Diameter Flywheel, 1-1/8"- 26 Input
improving elapsed times on heavy cars MCL6912-03 Ford 2001.5-10 V8, Modular 4.6/5.4L, 1-1/16"- 10 Input
with small displacement engines. Please call for specific applications before ordering.
Ring Ring

Part No. Application

Weight Gear
lbs. Teeth
Gear
O.D.
RXT Twin Street Disc Clutch Kit
MCL460130
1955-03 Chevy 265-454, Neutral
28-33 168 14.096" MCL6932-07
Bal.
The ideal clutch for the
MCL460530 1997-06 Chevy Gen. III 5.7 LS1 28-33 168 14.096"
1964-69 SB Ford 260-289, Ext. Bal.,
street machine with
MCL463100
28 oz., Sm. Flywheel
22-27 157 13.294" plenty of horsepower,
MCL463100 1964-69 SB Ford 260-289, Int. Bal. 22-27 157 13.294" and the need for an
1963-74 BB Ford “FE” 332-427 Int. inexpensive, durable
MCL463215 28-33 184 15.503"
Balance clutch to handle all that
power. Ceramic facings on
Throw-Out Bearings the discs provide aggressive
Collar Bearing
engagement with light pedal
Part No. Application Height pressure, making the kit suitable
I.D. Face
GM, Use with for use on street rides that have been "kicked up a notch".
MCL16010
Diaphragm
1.225" 1.375" 2.640" The kit includes a pressure plate, two ceramic friction
or 12" B&B Pressure discs, floater plate, McLeod's patent-pending adapter
Plates
MCL16505 GM, Adjustable 1.580-1.930" 1.375" 2.750"
ring, and pilot tool. The flywheel is not included unless
1.586"-
noted. Fits: 1997-10 GM LS1; 2001.5-10 Ford 4.6/5.4L,
MCL16515 Ford, Adjustable 1.435" 2.750" 1-1/8"-26 Input.
1.940"

MCL16505
Street Twin Clutch Series Super Street Pro Clutch Kit
When engine
modifications
are moderate
and street tires
are being used,
the Super Street
Pro is the perfect
street/strip
clutch. Engine
modifications can
include upgraded exhaust
Capable of handling up to 1,200 horsepower, the Street and intake, cam and cylinder head
Twin Clutch Series is for street/strip vehicles with work, and engine programming. Slightly heavier pedal
nitrous, superchargers, or turbochargers. Special effort than stock, but with excellent holding capability.
floater straps provide improved dampening and quieter Part No. Description
operation. Kit includes discs, floater plate, flywheel, MCL75225 1955-85 Chevy, All V8, 1-1/8"x 26, 10.4" Disc, Diaphragm
pressure plate, and throw-out bearing where applicable. MCL75221 1955-85 Chevy, All V8, 1-1/8"x 26, 11" Disc, Diaphragm
Ring
Trans.
Part No. Application Gear Pressure Flywheel
Spline Plate
Teeth
1955-85 SB Chevy
MCL6400107 265-427 (Exc. 400), 1-1/8"-26 168 Diaphragm Steel
Int. Bal.

2023 - 2024 HOT ROD AND EARLY MUSCLE 315

 Bolt-On Shown

Hydraulic Throwout Bearings

Bolt-On
Designed for 6.500" or shallower bellhousings.
Stock Master Cyl. &
Street Pro Application Spline
Collar
I.D.
T.O.
Bearing
T.O. Bearing
Package
Clutch Kit GM, Tremec TKO 500/600,
1-1/8"-26 4.680" MCL1364 MCL13645
The Street Pro 3550 TKO, 2057
can handle basic Ford, Tremec TKO
1-1/8"-26 4.680" MCL1364 MCL13645
500/600, 3550 TKO, 2057
performance
Note: Always measure prior to ordering. Measure from the outside surface of the bellhousing to the
modifications like crown of the fingers of the pressure plate.
headers and cold air intakes
with street tires. Slightly heavier Slip-On Shown
than stock pedal effort and improved holding capacity. Slip-On
Part No. Description
OEM T.O. T.O.
MCL75117 1955-85 Chevy, All V8, 1-1/8" x 10, 10.4" Disc, Diaphragm Application Spline Bearing I.D. Bearing
MCL75124 1955-85 Chevy, All V8, 1-1/8" x 10, 11" Disc, Diaphragm Ford, B-W T-5 Through
Chrysler 318, 360, 340, 383 V8, 1-1/16"-10 1.430" MCL1400-30
MCL75109 1995/1996-Up T-45
1" x 23, 10.5" Disc, Diaphragm Ford, B-W T-56
1-1/8"-26 1.430" MCL1400-30
Aftermarket

PLUS UPS
Sportsman S/T Radial™ FREIGHT CHARGES
Developed to answer the demand of muscle car owners for a stylish, high-quality performance tire.
Raised white letters, or black sidewall out, the Sportsman S/T radial™ tire offers a wide, low-profile
look with great handling and performance. The S/T radial™ tires are "T" speed rated at 118 mph.
Approved Measuring Section Tread Overall
Part No. Size Sidewall Rims Rim Width Width Diameter
MIC90000000178 P215/70R15 RWL 5.5-7.0" 6.5" 8.7" 7.0" 26.7"
MIC90000000180 P225/70R15 RWL 6.0-7.5" 6.5" 9.1" 7.2" 27.4"
MIC90000000181 P235/60R15 RWL 6.5-8.5" 7.0" 9.2" 7.6" 26.1"
MIC90000000182 P245/60R15 RWL 7.0-8.5" 7.0" 9.5" 8.0" 26.6"
MIC90000000183 P255/60R15 RWL 7.0-9.0" 7.5" 10.24" 8.2" 27.0"
MIC90000000184 P275/60R15 RWL 7.5-9.5" 8.0" 10.7" 8.9" 28.1"
MIC90000000185 P295/50R15 RWL 8.0-10.0" 9.5" 12.22" 10.1" 26.8"

ET Street S/S
DOT-approved street tire which provides excellent traction at the dragstrip. Proven polyester-ply, steel-belted, tubeless
radial construction provides strength and durability for excellent ride control on the street. Proven R2 compound provides
quick and consistent traction at the strip with little burnout required. Minimal tread void for excellent dry traction,
strategically placed to aid in hydroplane resistance.
Part No. Tire Size Approved Rims Overall Diameter Section Width Tread Width Circumference
MIC90000024528 P235/60R15 (7.0) 6.5 - 8.5 26.1" 9.4" 7.7" 82
MIC90000024550 P275/50R15 (8.5) 7.5 - 9.5 25.9" 11.2" 9.7" 81
MIC90000024552 P255/60R15 (7.5) 7.0 - 9.0 27.1" 10.2" 8.6" 85
MIC90000024554 P275/60R15 (8.0) 7.5 - 9.5 28.0" 11.0" 9.3" 88
MIC90000024555 P295/55R15 (9.5) 8.0 - 10.5 27.8" 12.2" 10.6" 87
MIC90000024556 P295/65R15 (8.5) 8.0 - 10.5 30.1" 11.8" 10.9" 95
MIC90000024557 P255/50R16 (8.0) 7.0 - 9.0 26.1" 10.4" 9.4" 82
MIC90000024558 P275/40R17 (9.5) 9.0 - 11.0 25.7" 10.9" 10.0" 81
MIC90000024570 P305/35R18 (11.0) 10.0 - 12.0 26.4" 12.3" 11.5" 83
MIC90000024573 P345/35R18 (12.0) 11.5 - 13.5 27.5" 13.8" 12.5" 87
MIC90000024575 P305/35R19 (11.0) 10.0 - 12.0 27.4" 12.3" 10.2" 86
MIC90000024577 P275/40R20 (9.5) 9.0 - 11.0 28.7" 10.9" 9.1" 90
MIC90000024578 P305/35R20 (11.0) 10.0 - 12.0 28.4" 12.1" 10.0" 89

316 2023 - 2024 HOT ROD AND EARLY MUSCLE

ET Street R
DOT-approved race tire which can be driven on the street. Proven R2 compound on the radialsizes with M5 and X5
compounds on bias sizes to provide superior performance at the strip with little burnout required. Tubeless “Radial Pro”
technology used in radial sizes to provide the ultimate traction. Tube-type bias-ply sizes available for the most consistent
performance in manual transmission and Pro Street applications. Minimal tread void for the ultimate dry traction.
Overal
Part No. Tire Size Approved Rims Diameter Section Width Tread Width Circumference
MIC90000024650 P225/50R15 (7.0) 6.0 - 8.0 23.9" 9.2" 8.1" 75"
MIC90000024641 P275/50R15 (8.5) 7.5 - 9.5 25.9" 11.2" 9.9" 81"
MIC90000024642 P255/60R15 (7.5) 7.0 - 9.0 27.1" 10.2" 8.6" 85"
MIC90000024643 28X11.50-15LT (8.0) 8.0 - 10.0 27.7" 11.0" 8.7" 87"
MIC90000024644 P325/50R15 (10.0) 9.0 - 11.5 27.8" 13.2" 11.6" 87"
MIC90000024649 P315/35R17 (11.0) 10.5 - 12.5 25.7" 12.6" 11.4" 81"
MIC90000024660 P305/45R17 (10.0) 9.5 - 11.5 27.8" 11.9" 10.2" 87"
MIC90000024661 P305/45R18 (10.0) 9.5 - 11.5 28.8" 11.9" 10.2" 90"

Street Comp™
The Street Comp tire is built for ultra-high-performance applications. Incredible traction, crisp
handling, and high-speed cornering ability with outstanding appearance you’d expect from Mickey
Thompson. Asymmetric tread design for both wet and dry performance, and a 300 AA A UTQC
rating.
Approx. Measuring Sidewall Tread Overall
Part No. Size Weight Rim Width Width Diameter
MIC90000001600 275/40R17 29 lbs. 9.5" 10.9" 9.9" 25.6"
MIC90000001618 275/40R20 34 lbs. 9.5" 10.9" 9.9" 28.6"

Sportsman S/R™ Radial

A unique flame tread pattern and radial construction combine to bring a new style and a smooth ride
to Pro Street. Available for 15", 18", and 20" diameter wheels. Fronts also may be used with the M/T
ET Street Radial™.
Section Overall
Part No. Size Approx. Weight Measuring Rim Width Tread Width Diameter
MIC90000000230 26 X 6.00R15LT 20 lbs. 4.0" 6.5" 5.7" 26.0"
MIC90000000228 26 X 8.00R15LT 20 lbs. 6.0" 8.5" 7.0" 26.1"
MIC90000000241 26 X 6.00R18LT 18 lbs. 5.0" 6.3" 5.7" 26.0"

Sportsman Front™
A street-legal tire that is also suitable as a front drag tire. The nylon Sportsman Front™ tire is light
enough for the drags and durable enough for the rigors of daily street use.
Approx. Measuring Sidewall Tread Overall
Part No. Size Weight Rim Tube Size Width Width Diameter
MIC90000000593 26/7.50-15 16 lbs. 3.5-6.5" Tubeless 6.3" 4.8" 26"
MIC90000000594* 26/7.50-15 19 lbs. 3.5-6.5" Tubeless 6.3" 4.8" 26"
MIC90000000595 28/7.50-15 20 lbs. 3.5-6.5" Tubeless 6.9" 5.5" 28"
* Eight-ply construction suggested for use on cars 3,000 lbs. or heavier.

2023 - 2024 HOT ROD AND EARLY MUSCLE 317

Low-Profile Oil Pans Ford Front Sump
Oil pans have a triangular design for maximum oil Front sump oil pans are designed
capacity without compromising ground clearance. to fit pre-1974 chassis. MIL30925
Designed to fit stock chassis, pans include horizontal Part No. Description
baffles to provide oil control under acceleration or MIL30925 289-302, Front Sump
braking. MIL30926 351W, Front Sump
MIL30927 351C, Front Sump
MIL30929 429-460, Front Sump
Chevy Small Block Related Components
Part No. Description 289-302 Pickup for MIL18800
MIL30900 LH Dipstick, 1955-79 MIL18375
MIL30900 or MELM68HV Pumps
RH Dipstick, Dart SHP, 9-1/2" Deep Oil Pump Pickup
MIL30901 MIL18355
1980-85 Tube
MIL30902 RH Dipstick, 1986-Up 351W Pickup for MIL18810 or
MIL18365 MIL30927
Related Components MELM83HV Pumps
Pickup for MIL18750 429-460 Pickup for MIL18845 or
MIL18314 MIL18398
or MELM55HV Pumps MELM84HV Pumps
Pickup 289-351W Dipstick into Timing
MIL18311 MIL22030
for Melling M55 Pump Cover
Stainless Dipstick, 289-302 Windage Tray,
MIL22000 MIL32210
1955-79 Blocks Front Sump
Stainless Dipstick, MIL81157 289-302 Windage Tray Studs
MIL22005 MIL30929
1980-Up Blocks MIL81167 351W Windage Tray Studs
Windage Tray, LH MIL81190 429-460 Windage Tray Studs
MIL32100 MIL22000
Dipstick, 1955-79
Windage Tray, RH
MIL32102
Dipstick, 1980-Up
Ford Rear Sump
MIL81150 Windage Tray Studs Rear sump oil pans fit popular late model Ford engines.
Part No. Description
Small Block Chevy Stroker MIL32100 MIL31125 289-302, 1979-Up
MIL31126 351W
Pan accepts up to a 4" stroke with steel rods. MIL31127 357C
Part No. Description Related Components
RH Dipstick, Dart SHP, 289-302 Pickup for MIL18800 or
MIL30907 MIL18380
1980-85 MELM68HV Pumps
MIL30908 LH Dipstick, 1955-79 351W Pickup for MIL18810 or
MIL30909 RH Dipstick, 1986-Up MIL18385 MIL31125
MELM83HV Pumps
Pickup for MIL18750 Or 351W Pickup for MIL18810 or
MIL18316 MIL18387
MELM55HV MELM83HV Pumps
351W Pickup for MIL18810 or
MIL18388
Big Block Chevy MELM83HV Pumps
MIL30907 289-351W, 429-460 Stainless
Part No. Description MIL22040
Dipstick, Into Pan
MIL30950 Gen. IV 1965-90 MIL32227 429-460 Windage Tray
Gen. IV 1965-90, with Oil MIL81157 289-302 Windage Tray Studs
MIL30951
Filter Notch MIL81167 351W Windage Tray Studs
MIL30955 Gen. V & VI 1991-Up MIL81190 429-460 Windage Tray Studs
Gen. V & VI 1991-Up, with
MIL30956
Oil Filter Notch
396-454 Mark IV Engine Small Block Chrysler
MIL30970
1965-90 MIL30950 Part No. Description
454-502 Mark V & VI MIL30935 318-340
MIL30975
Engine 1965-90 MIL30936 318-340 A, B, & E Bodies
Related Components MIL30940 360
Pickup for MIL18760 or MIL30941 360 A, B, & E Bodies MIL30935
MIL18301
MELM77HV Pumps Related Components
MIL22010 Stainless Dipstick Pickup for MIL18780
MIL32200 Windage Tray MIL18345
or MELM72HV Pumps
MIL81151 Windage Tray Studs MIL30951
MIL22060 Stainless Dipstick
MIL32230 Windage Tray
MIL30936
AMC MIL81151 Windage Tray Studs

Part No. Description

MIL30250 304-401 Oldsmobile
Related Component Part No. Description
MIL18400 Pickup MIL30305 330-455
Related Components
Pickup for MIL18865 or MIL30305
MIL18411
MELM22FHV Pumps
MIL32245 400-455 Windage Tray
MIL30250

318 2023 - 2024 HOT ROD AND EARLY MUSCLE

Big Block Chrysler Pontiac
Part No. Description Part No. Description MIL30355
383-440 B-Body, Stock MIL30355 326-455
MIL30761
Replacement Related Components
MIL30930 383-440, 426 Hemi MIL18425 Pickup for MIL18850 Pump
383-440, 426 Hemi, MIL30930 MIL32240 Windage Tray
MIL30931
External Oil System MIL81151 Windage Tray Studs
383-440, 5" Deep with
MIL31151
Tubular K Member
383-440, 6" Deep with Oil Pumps
MIL31161
Tubular K Member Milodon oil pumps feature strengthened
Related Components MIL30761 necks. All small block Chevy pumps are made
MIL18325 Pickup with Stock 3/8" NPT Inlet of heavy-duty, 40,000 PSI "G-10" material
MIL18335 Pickup with 1/2" NPT Inlet to put an end to pump body breakage.
MIL22070 Stainless Dipstick All pumps are CNC-machined for precise
Oil Pump Drive Shaft with Steel MIL18750
MIL21505 tolerances and 100% flow tested. Choose
Gear Big Block Chrysler 383-440
Oil Pump Drive Shaft with Bronze
from standard volume, high-volume, and high-pressure
MIL21525 Distributor Gear Big Block /Hemi MIL31151
applications.
Chrysler, Dodge Plymouth 383-440 Part No. Description
Small Block and Big Block Chevy Oil Pump
MIL18740 High Volume 3/4" Inlet, Small Block Chevy
MIL18750 High Volume, Small Block Chevy
MIL18755 Standard Volume, Small Block Chevy
MIL18756 High Pressure, Small Block Chevy
MIL18760 High Volume, Big Block Chevy

Synthetic Gear Lube Full Synthetic Oil

Both Mobil Synthetic Gear Lube LS 75W-90 Mobil 1 advanced ful-synthetic motor oils
and LS 75W-140 are supreme performance, deliver exceptional performance and
synthetic, multi-purpose automotive gear protection for vehicles of all ages and for all
lubricants. They have been designed to driving conditions – normal to extreme. Keep
meet the highest level of performance engines running like new by helping combat
requirements of modern passenger vehicles sludge and deposit buildup, reduce wear,
in all types of operating conditions, including and control oil breakdown. Provides a full
limited-slip applications. range of temperature protection from cold
Case of (12) starts to high-temperatures.
Description 1-qt. Bottle 1-qt Bottles Case of (6) Case of (3)
LS 75W-90 MOB104361-1 MOB104361 Description 1 qt. Bottle 5-qt. Jug 1-qt Bottles 5-qt. Jugs
LS 75W-140 MOB102490-1 MOB102490 5W50 FSX2 MOB122075-1 — MOB122075 —
15W-50 MOB122377-1 — MOB122377 —
Synthetic Grease 5W-20 MOB103008-1 — MOB103008 —
5W-30 MOB124315-1 — MOB124315 —
MOB121071-1 5W-30 — MOB124317-1 — MOB124317
Lithium complex NLGI No. 2 grease 10W-30 — MOB122326-1 — MOB122326
incorporates extreme-pressure properties 15W-50 — MOB122377-1 — MOB122377
and superior resistance to wear, water wash,
rust, and corrosion. Synthetic base oil provides Extended Performance
maximum performance at low and high Mobil 1 Extended Performance is a high-
temperatures, and effective lubrication and performance synthetic motor oil that keeps
bearing protection over extended periods. Sold your engine running like new and provides
in 13.4-oz. cartridges, or in cases of (10) 13.4-oz. protection for up to 15,000 miles between
cartridges. oil changes. This advanced full synthetic
formulation helps extend engine life, reduce
oil breakdown, and minimize engine wear.
API certified.
Case of (6) 1-qt Case of (3)
Description 1 qt. Bottle 5-qt. Jug Bottles 5-qt. Jugs
0W-20 EP MOB120926-1 MOB120926 MOB120903-1 MOB120903
5W-20 EP MOB102989-1 MOB102989 MOB120765-1 MOB120765
5W-30 EP MOB112627 — — —
10W-30 EP MOB102990 — — —

2023 - 2024 HOT ROD AND EARLY MUSCLE 319

High Mileage ATF D/M
Premium, advanced fully synthetic motor Mobil ATF D/M is recommended by
oil is designed to help extend engine life in ExxonMobil for use in applications requiring
high-mileage engines. Lubricants include a GM DEXRON® IIIH or Ford MERCON®.
higher base viscosity and boosted levels of Case of (6)
seal conditioners to help reduce leaks, while 1-qt. Bottle 1-qt. Bottles
also providing improved high temperature MOB123130-1 MOB123130
protection. Sold in one-quart bottles, five-
quart jugs, or in cases. Multi-Vehicle ATF
Case of (6) 1-qt Case of (3) Mobil Multi-Vehicle ATF is a premium
Description 1 qt. Bottle 5-qt. Jug Bottles 5-qt. Jugs synthetic blend lubricant formulated for
5W-20 MOB120455-1 MOB120455 MOB120768-1 MOB120768 use in a wide variety of North American,
5W-30 MOB103767-1 MOB103767 — — European, and Asian vehicles, and meets
10W-30 MOB103535-1 MOB103535 MOB120770-1 MOB120770 Allison C4, GM Dexron IIIH, IIIG, IIE, IID, II,
10W-40 MOB103536-1 MOB103536 — —
Dexron, and Ford Mercon specifications. It is
not recommended for applications requiring
Advanced Fuel Economy Ford Mercon® LV, Mercon® SP, or GM Dexron®
Mobil 1 Advanced Fuel Economy, available VI.
in 0W-20 viscosity, helps improve fuel Case of (6)
economy while providing outstanding 1-qt. Bottle 1-qt. Bottles
engine protection. API certified. MOB123034-1 MOB123034
Case of (6)
1-qt. Bottle 1-qt. Bottles Type F ATF
MOB124184-1 MOB124184
Mobil Type F ATF is an automatic
transmission fluid which is made from
high-quality base oils with viscosity
index improvers, antioxidants, anti-
wear agents, defoamants, and special
additives to provide the controlled
frictional characteristics of a Type F fluid in
Mobil 1 Synthetic Blends automatic transmission applications.
Mobil 1 5W-20, 5W-30, and 10W-30 is Case of (6)
made with a proprietary blend of high- 1-qt. Bottle 1-qt. Bottles
performance synthetic base stocks MOB122974-1 MOB122974
fortified with a precisely balanced additive
component system. API certified. Extended
Case of (6) 1-qt Case of (3) Performance Oil Filters
Description 1 qt. Bottle 5-qt. Jug Bottles 5-qt. Jugs
5W-20 MOB103008-1 MOB103008 — — Mobil 1 extended-
5W-30 MOB124315-1 MOB124315 MOB124317-1 MOB124317 performance oil filters use
10W-30 — — MOB122326-1 MOB122326 synthetic fibers to provide
three times the capacity for
Synthetic ATF capturing dirt and other contaminants. This increased
Mobil 1 Synthetic ATF combines high- capacity helps provide the performance needed for
performance synthetic hydrocarbon base engines to perform better and last longer. Please call for
oils and a superior balanced additive system additional applications.
to provide significantly higher levels of Engine Year Part No.
performance above conventional fluids. GM
Camaro/Firebird
Case of (6) V8 1967-97 MOBM1-111A
1-qt. Bottle 1-qt. Bottles
MOB112980-1 MOB112980 Chevelle
V8 1968-75 MOBM1-111A
Malibu
V8 1978-88 MOBM1-111A
Dodge
Charger/Cornet
V8 1966-72 MOBM1-301A
V8 1973-76 MOBM1-204A
Challenger
V8 1970-72 MOBM1-301A
V8 1973-74 MOBM1-204A
Ford
Mustang
V8 1986-93 MOBM1-301A
V8 (4bbl Carb
1984 MOBM1-204A
VIN Code M Only)

320 2023 - 2024 HOT ROD AND EARLY MUSCLE

 Jet
MOMJET35BK0B
The black leather-wrapped
steering wheel features an
Prototipo airleather grip and carbon
This three-spoke black insert with black spokes.
leather-covered steering The black horn button is
wheel includes a black accented with a carbon
Momo logo horn button. outer ring. 350mm
350mm / 13-3/4" dia. (13-3/4") dia.
Part No. Description
MOMPRO35BK0S
MOMPRO35BK2B
Silver Three Spoke
Black Three Spoke
Competition
MOMCOM35BK0B
This black three-spoke
steering wheel features a
black airleather wrap with
a generous grip. Black horn
button. 350mm (13-3/4") dia.
Tuner
This black leather-covered
wheel features three spokes.
Available in 320mm (12-1/2") or
350mm (13-3/4") diameter.
Part No. Description
MOMTUN32BK0B 320mm (12-1/2") Dia., Black Race
MOMTUN35BK0B 350mm (13-3/4") Dia., Anthracite This anthracite three-spoke
steering wheel is wrapped
in a black airleather grip.
Anthracite horn button.
Part No. Description
MOMRCE32BK1B 320mm (12-1/2") Dia.
MOMRCE35BK1B 350mm (1 3-3/4"") Dia.

Montecarlo
This black three-spoke
steering wheel is covered in Quark
black leather and offers a red This black urethane-wrapped
or black Momo horn button. steering wheel features
Part No. Description leather inserts with black
MOMMCL32BK1B 320mm (12-1/2") Dia., Black Horn Button spokes and black center
MOMMCL35BK1B 350mm (13-3/4") Dia., Black Horn Button button. 350mm (13-3/4") dia.
MOMMCL32BK3B 320mm (12-1/2") Dia., Red Horn Button
MOMMCL35BK3B 350mm (13-3/4") Dia., Red Horn Button Part No. Description
MOMQRK35BK0BU Blue
MOMQRK35BK0R Red
MOMQRK35BK0B Black
Team
MOMTEA30BK0B
Black leather-wrapped
steering wheel with
airleather insert, black
spokes, and black horn
button. 300mm (12") dia. MOD. 30
Black suede. 320mm
(12-1/2") dia. 2.04 lbs.
Part No. Description
MOMR1960/32S Without Buttons
MOMR1960/32SHB With Buttons

2023 - 2024 HOT ROD AND EARLY MUSCLE 321

Mod 07 Daytona Evo
MOMR1905/35S This is the most advanced Momo seat
The Mod. 07 features a available. This black Hans® compatible
350mm (13.8”) dia. wheel fiberglass shell seat has black fabric over
with black leather or the rear and front portions of the seat
suede glued to the rim for while the Airnet® technical material
enhanced grip and durability covers the central portion,
over stitched wraps. The including the Kinder Point of
smooth wheel maximizes the seat. The particular shape
steering flow, while cutouts of the halo area reduces lateral
in the spokes reduce weight. movements of the helmet and
72mm (2.83”) dish, with protects the driver's head. The
orange centering line. anatomical backseat pads offer
comfort and airflow to assist in the reduction of driver
fatigue. The removable double leg cushion optimizes
Mod. 88 support as well. Five seat belt openings.
MOMR1988/35S Part No. Description
The Mod. 88 features race- MOM1075BLK Standard, 15.55" Wide
inspired elements such as a MOM1076BLK XL, 16.34" Wide
flat-bottom design for easier
driver entry and exit, black Daytona
anodized three-spoke center, This black Hans® compatible fiberglass
and a thick grip covered in shell seat has black fabric over the rear
premium suede to deliver and front portions of the seat while
maximum control in even pleated Airnet® technical material
the most driving extreme covers the central portion, including the
conditions. Wheel is 350mm Kinder Point of the seat. The particular
(13.8”) diameter, with a 43mm (1.69”) dish. shape of the halo area reduces
lateral movements of the helmet
Super Grand Prix and protects the driver's head.
The removable double-leg
Steering Wheel cushion optimizes support as
MOMGRA35WDOP well. Five seat belt openings.
These mahogany wood Part No. Description
steering wheels with walnut MOM1073BLK Standard, 15.55" Wide
finish feature polished chrome MOM1074BLK XL, 16.34" Wide
aluminum spokes. The semi-
matte finished wheels are 350 Supercup
mm (13-3/4") in diameter with This black Hans® compatible
a 37mm (1-1/2") dish. Includes fiberglass shell seat has black
Momo logo horn button. fabric over the rear and front
portions of the seat while pleated
Airnet® technical material covers
the central portion, including the
Kinder Point of the seat. The
removable double-leg cushion
optimizes support as well.
Five seat belt openings. Side
mounting.
Part No. Description
MOM1071BLK Standard, 15.35" Wide
MOM1082BLK XL,17.32" Wide

Start
MOM1070BLK
This Hans® compatible
fiberglass seat offers five
seat belt openings and four
mounting points. 15.55"
wide.

322 2023 - 2024 HOT ROD AND EARLY MUSCLE

Race Airleather Gotham
MOMRACAIR MOMGOTBK1
Black airleather shift knob with black This shift knob is covered with top grain
Momo logo cap and aluminum collar. leather, dark chrome, and a rubberized Momo
logo insert, the Gotham logo, and a dark
chrome collar.
Nero
This shift knob features
a black leather top with
a black enamel insert Combat Evo
featuring rubberized Momo These ergonomically shaped shift knobs
logo top along with the offer a black leather top with a chrome colored
yellow Momo logo. Also for insert with matching stitches. Momo Italy logo
“reverse lift system.” with a black collar.
Part No. Description Part No. Description
MOMNERBK1 Standard MOMCTECBN Carbon Look Insert, Black Collar
MOMNERBK1-R Reverse Lift MOMCTEBLU Blue Insert, Black Collar
MOMCTERED Red Insert, Black Collar
Automatico MOMCTESIL Silver Insert, Black Collar

An automatic transmission shift knob with

chrome inserts and a chrome collar.
Part No. Description
MOMAUTOBK1 Leather
MOMAUTOALU Satin Aluminum

Anatomico
This anatomically shaped shift knob is
covered in top grain leather and features an
embossed Momo logo.
Part No. Description
MOMALBK1 Standard, 3.94"
MOMASBK1 Short Version, 2.95"

Flexplate Moly-Coated Fuel Pump Eccentric

MOPP4529751AB MOPP4120484
SFI-approved flexplate is drilled Small block Chrysler, "A" engine fuel pump
for 7/16" converter bolts for use eccentric includes a moly coating that
with a six-bolt crank flange and significantly reduces friction and wear.
a Hemi, B&M, or Turbo Action
converter.

Engine Enamel
Engine enamel is matched to factory colors to keep engine compartment original. Each aerosol can contains 16
ounces of quick drying enamel for painting engines, or fast touch-up of engine components.
Part No. Description
Race Hemi Orange, Bright Orange Used on Cars with Max Wedge Engines (413 and 426 Cross Ram) from 1962-64, Also Used on
MOPP4120751AB
426 Race Hemis 1964-65
Turquoise, Medium Blue-Green Used on All “B/RB” Big Block Engines 1962-71 with the Exception of 1969-71 Hi-Perf 383/440
MOPP4120752AB
Engines (Street Hemi Orange)
MOPP4349218AB Red, Bright Red Used on All 273 Engines from 1964-69, Also the 1968-69 340 Engines and Most Mid-1960s 318 Engines

2023 - 2024 HOT ROD AND EARLY MUSCLE 323

 Distributor Drive Gear Assemblies
Assemblies feature hardened tip shaft with full radius
blend from hex to round,
XHD Leaf Springs and a pinned distributor
Extra heavy-duty leaf springs are direct replacements gear. Available for small
for old worn-out units. Perfect for bringing crisp handling block, big block, and
performance back to your muscle car. These are just like Hemi.
the units used on 1967-71 B-Body 440 and 426 Hemi and
Part No. Description
1970-74 E-Body 440 and 426 Hemi cars. Springs include MOPP3690715 Small Block, Flat Tappet Camshafts
front bushings installed. Big Block and Hemi
MOPP3571071
with Stock Oil Systems, Flat Tappet Camshafts
Big Block and Hemi
MOPP3690875
with Stock Oil Systems, Roller Camshafts

Part No. Vehicle Side

MOPP4452982 1966-72 B-Body Right High-Performance
MOPP4452983 1966-72 B-Body Left
Oil Filter
Rear Spring MOPP4452890
Mounting Seats Mopar oil filter works well on
street or strip vehicles and
MOPP4120074 fits “A”, “B”/“RB”, Hemi, Slant
New leaf spring mounting seats for 6 and 3.9L V6 engines.
XHD leaf springs with 8.25", 8.75", 9.25",
and 9.75" rear ends.

Oil Pan Bolts

Distributor Clamps MOPP4120613
Dress up the engine compartment Standard OEM-grade oil pan
of any Mopar with a heavy-duty, bolt package with thread sealer
chrome-plated distributor hold-down installed. Fits all small block, big
clamp. Complete with bolt. block, and 426 Hemi engines.
Part No. Description
MOPP4349278 273-360 “A” Engines
MOPP4349279 383-440 “B”/“RB” Engines Chrome Oil Dipsticks and Tubes
MOPP4349628
Plug Tube and Seal Set
MOPP4120294 Chrome dipsticks and tubes finish and dress up your oil
Designed specifically for Chrysler 426 pans (for center sump pans).
Hemi engines, set includes eight spark Part No. Description
plug tubes and eight seals. MOPP4349628 Fits 273-360 Engines
MOPP4349629 Fits 383-440 Engines
Lightweight Starter
MOPP5249644AC Windage Trays
Small block Chrysler "A" Designed to increase
engine starter weighs just 7 horsepower while improving
pounds and is roughly half the engine lubrication. Package
weight of 1960s-70s vintage includes tray and two pan
units. May require some gaskets.
header, exhaust, or block modifications on some cars. Part No. Description
MOPP4120998 383-440 and 426 Hemi, 3.750" Stroke

324 2023 - 2024 HOT ROD AND EARLY MUSCLE

 Small Block Chrysler “A”
Polished Valve Cover Set
Oil Pumps MOPP5007613AB
High-output oil pump provides The same high-quality
25% more oil volume than a aluminum valve covers
stock unit. Ideal for replacing polished to a chrome-like
a stock pump in a high- finish with the raised Mopar
performance engine. Performance logo. The perfect
Part No. Description addition to any show car. Complete
MOPP4286589 Fits 273-360 Engines with oil filler caps. Fits all
“A” engines.
Oil Pressure Relief Springs
These pressure relief springs are designed to Valve Cover Hardware Kit
increase the oil pressure in high-performance
applications. Includes the spring, cap, and MOPP4120272
instructions. Designed for stamped steel
Part No. Description
valve covers only, kit includes
MOPP3690944 Fits 273-360 Engines 12 chrome-plated screws and
washers, one chrome-plated
oil filter cap, and two rubber
grommets. Fits all Chrysler V8s.
Big Block Chrysler “B/RB” Cast
Aluminum Black Wrinkle Valve Covers Chrome Breather Caps
MOPP5007614
Rugged, black wrinkle-
finished cast aluminum
valve covers look
good in any engine
compartment. Set Part No. Description
includes two valve MOPP4529880
Twist-On Style, Bottom Vented
covers, and oil filler caps. Fit for Use with Mopar Cast Aluminum Valve Covers
Push-In Style, Use to Fill Extra Holes in Mopar Cast
all “B”/“RB” series engines. MOPP4529881
Aluminum Valve Covers

Chrome Timing Chain Cover

Big Block Chrysler “B/RB” Chrome-plated steel cover is the
Polished Cast Aluminum Valve Covers perfect finishing touch for “B” and
“RB” engines.
MOPP5007616 Part No. Description
Polished aluminum Chrome
MOPP4349816AB
valve covers proudly Timing Chain Cover
wear the Mopar MOPP4452795
Chrome Attaching Bolt
Performance logo. Package “B” Engine
Set includes two valve
covers and oil filler
caps. Fits all “B”/“RB”
series engines.

2023 - 2024 HOT ROD AND EARLY MUSCLE 325

Small Block Chevy, Small Block Chevy,
6-Quart Deep Sump 7-Quart Kicked-Out
Oil pans fit most Chevy Sump
chassis with small block except Oil pans fit most Chevy chassis with small
1962-67 Chevy II and V8 Vega/Monza. 8-1/4" MOR20180 MOR20190
blocks except 1962-67 Chevy II and V8 Vega/
deep pans have a six-quart capacity and trap door oil Monza. 8-1/4" deep pans have a seven-quart
control baffle. Pans accept up to 3.800" stroke with most capacity, kicked-out sump, and trap door oil control
steel rods and fit with most starters/flywheels. baffle. Pans accept up to 3.800" stroke with most steel
Part No. Description rods and fit with most starters/flywheels.
Pre-1980 Blocks
MOR20180 Part No. Description
With Driver-Side Dipstick, Clear Zinc-Plated Steel
Pre-1980 Blocks
1980-85 Blocks MOR20190
MOR20181 With Driver-Side Dipstick, Clear Zinc-Plated Steel
With Passenger-Side Dipstick, Clear Zinc-Plated Steel
1980-85 Blocks
1986-Up Blocks MOR20200
MOR20182 With Passenger-Side Dipstick, Clear Zinc-Plated Steel
With One-Piece Rear Main Seal, Clear Zinc-Plated Steel
1986-Up Blocks
Recommended Pickups and Accessories MOR20205
With One-Piece Rear Main Seal, Clear Zinc-Plated Steel
MOR24170 Pickup for Stock Oil Pumps or MOR22101
Recommended Pickups and Accessories
MOR24350 Pickup For SB Chevy HV Race Pump MOR22111
MOR24170 Pickup for Stock Oil Pumps or MOR22101
Pickup for BB Chevy Race Pump
MOR24320 MOR24350 Pickup for SBC HV Race Pump MOR22111
MOR22150, MOR22160, or MOR22162
Pickup for BBC Race Pump MOR22150, MOR22160,
MOR23020 Windage Tray MOR24320
or MOR22162
MOR23000 Oil Pan Baffle
MOR23020 Windage Tray
MOR25800 Crank Scraper
MOR23000 Oil Pan Baffle
MOR25800 Crank Scraper
Small Block Chevy, 7-Quart Deep Sump
Oil pans fit most Chevy Small Block Chevy,
chassis with small blocks
except 1962-67 Chevy 6-Quart Vega/Monza
II and V8 Vega/Monza. MOR20230
9-1/2" deep pans have Clear zinc-plated
a seven-quart capacity steel pan fits pre-
and trap door oil control MOR20160 1980 blocks with
baffle. Pans accept up driver-side dipstick
to 3.800" stroke with most steel rods and fit with most V8 Vega/Monza chassis.
starters/flywheels. 8-1/4" deep pan has a 6-quart capacity,
Part No. Description notched sump to clear crossmember, and trap door oil
MOR20160
Pre-1980 Blocks control baffle. Pan accepts up to 3.480" stroke with most
With Driver-Side Dipstick, Clear Zinc-Plated Steel steel rods and fits with most starters/flywheels.
1980-85 Blocks
MOR20165 Part No. Description
With Passenger-Side Dipstick, Clear Zinc-Plated Steel
Recommended Pickups and Accessories Recommended Pickups and Accessories
MOR24150 Pickup for Stock Oil Pumps or MOR22101 MOR24170 Pickup for Stock Oil Pumps or MOR22101
MOR24340 Pickup for SBC HV Race Pump MOR22111 MOR24350 Pickup for SBC HV Race Pump MOR22111
MOR23020 Windage Tray Pickup for BBC Race Pump MOR22150, MOR22160,
MOR24320
or MOR22162
MOR23000 Oil Pan Baffle
MOR23000 Oil Pan Baffle
MOR25800 Crank Scraper
MOR25800 Crank Scraper

Small Block Chevy, LS1/LS6, 7-Quart Kicked-Out Sump

6-Quart Chevy II
Oil pans fit 1962-67 Chevy
MOR20140
II chassis without power Clear zinc-plated
steering. 9" deep pans steel pan fits
have a six-quart capacity LS1/LS6 block in
and notched sump to clear 1968-72 Nova, 1965-72
steering linkage. Pans accept up to 3.800" A-body and 1967-69 F-body. Six-inch
stroke with most steel rods and fit with most MOR20211
deep pan has a seven-quart capacity,
starters/flywheels. kicked-out sump, -10AN fitting (for remote filter) and trap
door oil control baffle. Pan accepts up to 4-1/8" stroke
Part No. Description
with most steel rods and uses stock dipstick.
Pre-1980 Blocks
MOR20211
With Driver-Side Dipstick, Clear Zinc-Plated Steel Part No. Description
1986-Up Blocks Recommended Pickup and Pump
MOR20212
With One-Piece Rear Main Seal, Clear Zinc-Plated Steel MOR24050 Pickup for Stock Oil Pumps or MOR22101
Recommended Pickups And Accessories MOR22120 Moroso HV Race Oil Pump
MOR24120 Pickup for Stock Oil Pumps or MOR22101
MOR24122 Pickup for SBC HV Race Pump MOR22111
MOR23000 Oil Pan Baffle
MOR25800 Crank Scraper

326 2023 - 2024 HOT ROD AND EARLY MUSCLE

Big Block Chevy Gen IV, Big Block Chevy Gen IV,
6-Quart Short Sump 6-Quart Kicked-Out Sump
MOR20412 MOR20403
Clear zinc-plated steel Clear zinc-plated steel
pan fits most Gen IV pan fits most Gen IV
blocks in GM chassis except blocks in GM chassis
1962-67 Chevy II, V8 Vega/Monza, and 1955-57 except 1962-67 Chevy II, V8 Vega/Monza,
Chevy. 8" deep pan has a 6-quart capacity, 1-1/4" shorter and 1955-57 Chevy. Eight-inch deep pan has a six-quart
sump to clear crossmember, and trap door oil control capacity, kicked-out sump, windage screen, crank
baffle. Pan accepts up to 4-1/2" stroke with most steel scraper, and trap door oil control baffle. Pan accepts up
rods, clears rear-steer A-body center links, and fits with to 4.500" stroke with most steel rods and fits with most
most starters/flywheels. starters/flywheels.
Part No. Description Part No. Description
Recommended Pickups and Accessories Recommended Pickups and Accessories
Pickup for Stock Oil Pump or MOR22150, Pickup for Stock Oil Pump or MOR22150,
MOR24440 MOR24440
MOR22160, or MOR22162 MOR22160, or MOR22162
Same as Above except Offset for Consistent Oil Pressure Same as Above except Offset for Consistent Oil Pressure
MOR24446 MOR24446
under Braking under Braking
MOR23030 Windage Tray MOR23010 Oil Pan Baffle
MOR23010 Oil Pan Baffle MOR25970 Universal Dipstick
MOR25830 Crank Scraper
MOR25970 Universal Dipstick
Big Block Chevy Gen V/VI,
6-Quart Kicked-Out
Big Block Chevy Gen IV, Sump
7-Quart Kicked-Out Sump MOR20411
MOR20401 Fabricated, clear
Clear zinc-plated steel zinc-plated steel
pan fits most Gen IV pan fits most Gen V/VI blocks in GM chassis, including
blocks and all GM chassis 1965-72 Chevelle, Cutlass, Skylark, and Tempest/GTO.
except 1962-67 Chevy II, V8 Eight-inch deep pan has a six-quart capacity, kicked-
Vega/Monza and 1955-57 Chevy. Eight-inch out sump, removable anti-slosh tray, and trap door oil
deep pan has a seven-quart capacity, kicked-out-sump control baffle. Pan accepts up to 4-1/4" stroke with most
and trap door oil control baffle. Pan accepts up to 4-1/4" steel rods, accommodates stock GM main cap mounted
stroke with most steel rods and fits with most starters/ windage tray, and fits with most starters/flywheels.
flywheels. Part No. Description
Part No. Description Recommended Pickups and Accessories
Recommended Pickups and Accessories Pickup for Stock Oil Pump or MOR22150,
MOR24440
Pickup for Stock Oil Pump or MOR22150, MOR22160, or MOR22162
MOR24440
MOR22160, or MOR22162 Same as Above except Offset
MOR24446
Same as Above except Offset for Consistent Oil Pressure for Consistent Oil Pressure under Braking
MOR24446
under Braking MOR25970 Universal Dipstick
MOR23030 Windage Tray
MOR23010 Oil Pan Baffle Big Block Chevy
MOR25830 Crank Scraper
MOR25970 Universal Dipstick Gen V/VI, 6-Quart
Kicked-Out Sump
Oil Pan for Mark IV Big Block Chevy MOR20413
MOR20416 Clear zinc-plated steel pan fits most Gen V/VI blocks in
Steel six-quart 1965-72 Chevelle, Cutlass, Skylark and Tempest/GTO.
capacity oil pan Eight-inch deep pan has a six-quart capacity, kicked-out
for wet sump sump, and trap door oil control baffle. Pan accepts up to
applications is 4-5/8" stroke with most steel rods, accommodates stock
8” deep and has GM main cap mounted windage tray, and fits with most
a T-sump and starters/flywheels.
windage tray. Part No. Description
Designed to fit big block Chevy Mark IV engines (except Recommended Pickups and Accessories
Gen V and Gen VI) in most GM A-body chassis, including MOR24440
Pickup for Stock Oil Pump or MOR22150,
1968-72 Chevelle, Cutlass, Skylark, Tempest, and GTO. MOR22160, or MOR22162
Does not fit 1962-67 Chevy II, V8 Vega/Monza, or 1955- Same as Above except Offset for Consistent Oil Pressure
MOR24446
under Braking
57 Chevy.
MOR23030 Windage Tray
MOR23010 Oil Pan Baffle
MOR25830 Crank Scraper
MOR25970 Universal Dipstick

2023 - 2024 HOT ROD AND EARLY MUSCLE 327

Big Block Chevy Gen 4, Ford 5.0L Fox Body,
7-Quart Chevy II 7-Quart Kicked Out Sump
MOR20431 MOR20506
Clear zinc-plated Clear zinc-plated
steel pan fits Gen steel pan fits 289-
IV block and 1962-67 302 block 1979-93
Chevy II without power Mustang, 1981-88
steering and 1955-57 Chevys. Thunderbirds and
Transmission must be in the stock location. Nine-inch Cougars and 1979-86 Capris that require a rear sump.
deep pan has a seven-quart capacity and notched rear 7-1/2" deep pan has a seven-quart capacity, kicked-out
sump (clears steering linkage). Pan accepts up to 4-1/4" sump, oil retention baffle, and a universal dipstick. Pan is
stroke with most steel rods and fits with most starters/ engineered to supply oil at all times, clears 4-bolt mains
flywheels. (centers only), and fits with most starters/flywheels.
Part No. Description Part No. Description
Recommended Pickups and Accessories Recommended Pickup and Accessory
Pickup for Stock Pump or MOR22150, MOR24517 Pickup For Ford SVO M-6600-D2 Or Melling M68HV Pumps
MOR24430 MOR22928 Main Cap Girdle
MOR22160, or MOR22162
MOR23010 Oil Pan Baffle
MOR25970 Universal Dipstick Ford 5.0L Fox Body, 7 Quart Deep Sump
Small Block Ford 289-302, 9-Quart MOR20521
Clear zinc-
MOR20503 plated steel
Pans fit all Ford, rear sump pan
Mercury and Cobra fits 289 block in
kit cars that require 1979-93 Mustang,
a front sump. 1981-88 Thunderbird
Each eight- inch and Cougar, and
deep pan has a 1979-86 Capri. Nine-inch deep pan has a
nine-quart capacity, seven-quart capacity, oil sump retaining system, and
kicked-out sump, oil control system (for both street/strip a universal dipstick. Pan is engineered to supply oil at
or road racing), and a universal dipstick. Pans clear 4-bolt all times, clears 3.400" stroke with most steel rods and
mains (centers only) and fit with most starters/flywheels. 4-bolt mains (centers only), and fits with most starters/
Part No. Description flywheels.
Recommended Pickups Part No. Description
Pickup for MOR20503 Pan (289-302) Recommended Pickups and Accessories
MOR24523
with Melling M68 Pump MOR22928 Main Cap Girdle
MOR22930 Louvered Windage Tray (Does Not Fit R4 Block)
Small Block Ford, MOR38191 Windage Tray Mounting Studs
7-Quart Kicked-Out Sump
Pans fit all Ford Ford 5.0L Fox Body, 7-Quart Deep Sump
and Mercury MOR20511
cars and trucks Fabricated, clear
originally zinc-plated rear
equipped with sump steel pan fits
front sump 289-302 block in
pans. Each eight-inch deep pan 1979-93 Mustang,
has a seven-quart capacity, kicked- 1981-88 Thunderbird
out sump, oil retention baffle, and a universal dipstick. and Cougar, and
Pans clear 4-bolt mains (centers only) and fit with most 1979-86 Capri. Nine-inch
starters/flywheels. deep pan has a seven- quart capacity, oil
Part No. Description sump retaining system, and a universal dipstick. Pan is
MOR20502 289-302 Blocks, Clear Zinc-Plated Steel engineered to supply oil at all times, clears 3.400" stroke
MOR20507 351W Blocks, Clear Zinc-Plated Steel with most steel rods and 4-bolt main caps, and fits with
Recommended Pickups and Accessories most starters/flywheels.
MOR24520 Pickup for 20502 Pan (289-302) with Melling M68 Pump
Part No. Description
MOR24507 Pickup for 20507 Pan (351W) with Melling M83 Pump
Recommended Pickups and Accessories
MOR22930 Louvered Windage Tray for MOR20502 Pan MOR24516 Pickup for Melling M68 or M68HV Pump
MOR22935 Louvered Windage Tray for MOR20507 Pan MOR22930 Louvered Windage Tray (Does Not Fit R4 Block)
MOR38191 Windage Tray Mounting Studs for MOR20502 Pan MOR38191 Windage Tray Mounting Studs
MOR22928 Main Cap Girdle

328 2023 - 2024 HOT ROD AND EARLY MUSCLE

Ford 351W Fox Body, 7-Quart Deep Chrysler 360, 8-Quart Deep Sump
Sump MOR20730
MOR20523 Clear zinc-plated
Clear zinc-plated steel steel pan fits most
rear sump pan fits 351W 360 blocks in Chrysler
block in 1979-93 Mustang, muscle car chassis.
1981-88 Thunderbird and Ten-inch deep pan has an eight-
Cougar, and 1979-86 Capri. Nine-inch deep pan has a quart capacity and anti-slosh
seven-quart capacity, oil sump retaining system, and a baffle. Pan clears 4.00" stroke with steel rods and fits
universal dipstick. Pan clears 351W 4-bolt center mains. with most starters/flywheels.
Part No. Description
Part No. Description
Recommended Pickup
Recommended Pickups and Accessories
MOR24700 Pickup for Stock or Chrysler MOR2468489 Pump
MOR24532 Pickup for Melling M83 or M83HV Pump
MOR22935 Louvered Windage Tray (Use with MOR24532 Pickup)
MOR38192 Windage Tray Mounting Studs Chrysler 361-440, 7-Quart Deep Sump
MOR20760
Ford 351W Fox Body, 7-Quart Deep Sump Clear zinc-plated
MOR20520 steel pan fits 1966
Fabricated, clear zinc-plated and newer muscle
steel rear sump pan fits 351W car chassis with 361-440 wedge
block in 1979-93 Mustang, and 426 street Hemi engines.
1981-88 Thunderbird and Cougar, Seven-inch deep pan has a seven-
and 1979-86 Capri. Nine inch deep quart capacity, anti-slosh baffle, and fits with most
pan has a seven-quart capacity, notched pan rail to clear starters/flywheels.
SVO caps, oil sump retaining system, and a universal Part No. Description
dipstick. Pan clears 4-bolt main caps. Recommended Pickups
MOR24750 Pickup for Stock B/RB Pumps (3/8-18 Thread)
Part No. Description
MOR24800 Pickup for Stock Hemi Pumps (1/2-14 Thread)
Recommended Pickups and Accessories
MOR24532 Pickup for Melling M83 or M83HV Pump
MOR22935 Louvered Windage Tray (Use with MOR24532 Pickup) Fabricated Aluminum Oil Pan
MOR38192 Windage Tray Mounting Studs for Chrysler 5.7/6.1L
Ford FE, 7-Quart Deep Sump MOR21161
Fabricated
MOR20609 aluminum,
Clear zinc-plated wet-sump pan has
steel pan fits a large, “T”-style sump
most 352-428 FE with an eleven-quart capacity.
blocks in front sump Pan includes an anti-slosh baffle,
production chassis oil temperature fitting, and
except Mustang II. supercharger drain back fitting.
7-1/2" deep pan has a seven- Designed to be used in LX Platform Chassis.
quart capacity, oil sump retaining system, removable oil
sump tray, and magnetic drain plug.
Oldsmobile, 7-Quart Deep Sump
Part No. Description
Recommended Pickup and Accessory MOR20480
MOR24609 Pickup for Melling M57HV Pump Pans fit all 1965-later
MOR22940 Louvered Windage Tray 330-455 Oldsmobile
engines in most stock
Chrysler 273-340, 8-Quart Deep Sump GM chassis without
modifications. Each pan has a seven-
MOR20710 quart capacity, anti-slosh baffle, and fits
Clear zinc-plated steel pan fits most with most starters/flywheels.
273-340 blocks in Chrysler
muscle car chassis. Part No. Description
Recommended Pickup
Ten-inch deep pan has MOR24460 Pickup for MOR20480 Pan with Stock Oil Pump
an eight-quart capacity,
anti-slosh baffle, and
fits with most starters/
flywheels.

2023 - 2024 HOT ROD AND EARLY MUSCLE 329

Pontiac, 7-Quart Deep Sump Timing Cover Bolts
MOR20500 MOR38590
Clear zinc-plated Grade 8 high-strength steel
steel pan fits Pontiac timing cover bolts fit small and
301-455 blocks in 1967- big block Chevy. Cadmium-
81 Firebird, 1964-87 mid-and full-size plated for corrosion resistance,
chassis. 8-1/2" deep pan has a seven-quart bolts are 1/4"-20 hex head with self-locking integral
capacity, oil sump retaining system, and fits with most serrated washers.
starters/flywheels.
Part No. Description Header Bolts
Recommended Pickup
MOR24482 Pickup for 3/4" Inlet Pumps MOR38710
Grade 8 high-strength steel header
Fabricated Aluminum bolts are 7/16" hex head with black
oxide finish for corrosion resistance.
Transmission Pans Bolts fit small and big block Chevy and small
Extra-capacity aluminum block Ford.
pan lowers temperatures
and has a one-piece
billet rail, dual fittings
Harmonic Balancer Bolt
with magnetic plugs, and MOR38770
includes filter spacer and Grade 8 high-strength steel bolt has
hardware. thick 3/4" hex head for better socket
Part No. Description engagement and is gold iridite-finished for corrosion
MOR42010 GM TH-350 Transmission Pan resistance. Fits small block Chevys.
MOR42020 GM TH-400 Transmission Pan
MOR42080 Chrysler TF-727 Transmission Pan
Flywheel/Flexplate/
Perm-Align Transmission Gaskets Torque Converter Bolts
Full 3/16" thick gaskets are 40-durometer rubber, Bolts are grade 8 and heat
vulcanized to a rigid steel treated for maximum strength
frame, and require no sealants. and black oxide finished for
corrosion resistance.
Part No. Description
MOR93102 GM TH-350 Part No. Description
MOR93103 GM TH-400 MOR38760 Small Block Chevy, 7/16"-20 x 3/4" Long, Flex Plate Bolts
MOR93105 Ford E40D/4R100 All GM, TH-350 and TH-400, 3/8"-24 x 5/8" Long,
MOR38764
Ford AOD/ Torque Convertor Bolts
MOR93106
AODE/4R70W
MOR93107 Ford C-4 Electric Water Pump for GM LS
MOR93108 Ford C-6
MOR93110 Chrysler 727 MOR63566
Efficient and lightweight,
Oil Pan Bolts electric water pump mounts
Grade 8 oil pan bolts have self- directly to the stock pump
locking washers and are cadmium- location. Horsepower is
plated. improved by eliminating the
drive belt, while cooling is improved
Part No. Description
MOR38550 Small Block Chevy and All Oldsmobile V8s
under all driving conditions. Unit draws only 7 amps and is
MOR38560 Big Block Chevy and All Pontiac V8s compatible with 12- or 16-volt systems.
Note: Requires use of a remote thermostat housing such as MOR63425
Intake Manifold Bolts or MOR63426.

Grade 8 high-strength steel

intake manifold bolts are 3/8" Aluminum Water Pumps
with 12-point head for tight 356-T6 aluminum pumps
clearances. Bolts are gold have reinforced housings.
iridite-finished for corrosion Lightweight, low-
resistance. MOR38400
drag impellers add 14
Part No. Description horsepower and have a
Small Block Chevy and Small Block Chrysler high flow rate for consistent
MOR38400
with Single Plane Manifold cooling.
MOR38410 Big Block Chevy with Dual-Plane or Tunnel Ram Manifold Part No. Description
MOR38420 Big Block Chevy with Single-Plane Manifold Small Block Chevy, 1955-68 Short 5.603",
MOR63500
5/8" Diameter Shaft

330 2023 - 2024 HOT ROD AND EARLY MUSCLE

Race/Street Air Cleaners Low-ProfIle Air Cleaner
MOR66310 Anodized aluminum low-profile air
PCV adapter and matching wing nut cleaner has unique radiused air inlet
are included with each air cleaner. that equalizes air pressure past the
Air cleaners fit Holley, Thermoquad, boosters for uniform airflow. Overall
Quadrajet and all carburetors with a height is only 2-1/2" with a three-inch
5-1/8" diameter carburetor neck. tall element. Fits all carburetors with a 5-1/8" diameter neck.
Includes stud, wing nut, three-inch tall element, and PCV
Note: Not legal for sale or use on pollution-controlled vehicles originally equipped with a adapter.
thermostatic air cleaner.
Part No. Description
MOR65906 Blue Power-Coated Finish, 14" Diameter with 3" Element
MOR65910 Chrome-Plated, 14" Diameter with 3" Element

Big Block Chevy Valve Covers

MOR68112 MOR68333 MOR68425

MOR68426 MOR68481
Part No. Description
MOR68112 Chrome-Plated Steel, Tall, No Baffles
MOR68113 Chrome-Plated Steel, Tall, Baffled
MOR68425 Polished Cast Aluminum, Smooth Finish, Tall, No Holes
MOR68426 Gray/Black Cast Aluminum Carbon Fiber, Extra Tall, No Holes
MOR68333 Fabricated Aluminum, Rigid Rail, 3-1/2" Tall, No Holes
MOR68481 Fabricated Aluminum, Billet Rail, 3" Tall, Tubes on Intake Side and Pockets on Exhaust Side

Small Block Chevy Valve Covers

MOR68405 MOR68411 MOR68102 MOR68401

MOR68006 MOR68335 MOR68326

Part No. Description

MOR68006 Red Stamped Aluminum, 3-1/2" Tall, 1" Hole Each Corner, Perimeter Bolts
MOR68102 Chrome-Plated Steel, 3-1/2" Tall, No Baffles, Perimeter Bolts
MOR68103 Chrome-Plated Steel, 3-1/2" Tall, Baffled, Perimeter Bolts
MOR68401 Polished Cast Aluminum, Moroso Logo, 3-1/2" Tall, No Holes, Perimeter Bolts
MOR68405 Polished Cast Aluminum, Smooth Finish, 3-1/2" Tall, No Holes, Perimeter Bolts
MOR68411 Black Cast Aluminum, Moroso Logo, 3-1/2" Tall, No Holes, Perimeter Bolts
MOR68335 Fabricated Aluminum, Rigid Rail, 4" Tall, No Holes, Perimeter Bolts
MOR68326 Fabricated Aluminum, Billet Rail, 3-3/8" Tall, No Holes, Perimeter Bolts

2023 - 2024 HOT ROD AND EARLY MUSCLE 331

GM LS Series Valve Covers Big Block Ford 429-460
Valve Covers

Part No. Description

Part No. Description MOR68349 Fabricated Aluminum, Billet Rail, 3-1/2" Tall, No Holes
MOR68471 Billet Aluminum, 2-1/2" Tall without Coil Mounts

Small Block Ford Valve Covers

Small and Big Block Chrysler
Valve Covers

MOR68201 MOR68450
MOR68181 Part No. Description
MOR68161 MOR68201 Chrome-Plated Steel, 3-1/2" Tall, Baffled
MOR68202 Chrome-Plated Steel, 3-1/2" Tall, Not baffled
Part No. Description Polished Cast Aluminum, Smooth Finish, 3-1/2" Tall,
MOR68161 Small Block, Chrome-Plated Steel, 3-3/8" Tall, Baffled MOR68450
No Holes
MOR68181 Big Block, Chrome-Plated Steel, 3-3/8" Tall, Baffled
* Must use 2006-up 5.7 or 6.1L coil packs. Pontiac 301-455 Valve Covers
Big Block Ford 302/351W Valve Covers

Part No. Description

MOR68281 Chrome-Plated Steel, 3-1/2" Tall, Baffled
Part No. Description
MOR68475 Fabricated Aluminum, Billet Rail, 2-3/4" Tall

Valve Cover Accessories MOR68817

Part No. Description

Perm-Align Valve Cover Gaskets
MOR93020 SB Chevy Rubber-Coated Valve Cover Gaskets, 3/16" Thick, Reusable, Pair
MOR93040 BB Chevy Rubber-Coated Valve Cover Gaskets, 3/16" Thick, Reusable, Pair
MOR93060 SB Ford Rubber-Coated Valve Cover Gaskets, 3/16" Thick, Reusable, Pair
Valve Cover Hold-Down Tabs
MOR93020
MOR68506 SB Chevy Blue Powder-Coated, Four 5" Tabs
MOR68510 SB Chevy Chrome-Plated, Four 5" Tabs
MOR68516 BB Chevy Chrome-Plated, Four 3" Tabs And Three 4" Tabs
MOR68512 SB Mopar Chrome-Plated, Three 4" Tabs (Use 1/4" Washer Face Nuts for End Holes)
SB Ford Chrome-Plated, Three 3" Tabs and One 4" Tab (Use 1/4" Washer Face Nuts
MOR68519
for End Holes)
MOR68530 Pontiac Chrome Plated, Four 5" Tabs
Valve Cover Hold-Down Studs
MOR68550 Chrome Plated Hex Head Hold-Down Studs, 1/4-20" Stud Thread, 4-Pack MOR68603
MOR68561 Chrome Acorn Head Hold-Down Studs, 1/4-20" Stud Thread, 8-Pack
MOR68603 Black Anodized Extra-Long “T” Hold-Down Studs, 1/4-20" Stud Thread, 4-Pack
MOR68610 Chrome Plated Extra-Long “T” Hold-Down Studs, 1/4-20" Stud Thread, 4-Pack
Valve Cover Breathers
MOR68660 Chrome-Plated Push-In Oil Filler Cap, Fits Covers with 1.22" Hole, 1-Pack Ford Mustang Applications
MOR68740 Chrome-Plated Push-In Breathers, Fits Covers with 1.22" Hole, 2-Pack
MOR68741 Chrome-Plated Push-In PCV Breather, Fits Covers with 1.22" Hole, 1-Pack
Racing Oil Filter
MOR68813 Chrome Half-Shielded Open Element Breather, Push-In 1.22" Hole, 1-Pack MOR22463
MOR68817 Chrome Non-Shielded Open Element Breather, Push-In 1.22" Hole, 1-Pack Fits all 1996-2010 Ford
4.6/5.4L modular V8s
with 22mm threads.

332 2023 - 2024 HOT ROD AND EARLY MUSCLE

Automatic Transmission Distributor Hold-Down Clamp
Oil Cooler/Filter MOR26200
MOR41200 Clamp is slotted for quick
Combination cooler/filter distributor removal and mounts
uses space-age “heat sink” to on a stud to eliminate thread wear
dissipate the excessive heat build-up in in the intake manifold. Fits Chevy
racing transmissions. Made of aluminum with engines.
500 square inches of radiating surface for high heat
transfer. Filter with magnet removes all wear particles Battery Terminal Disconnect
over 4 microns. Three-inch diameter, twelve inches long, Switch
and weighs only one pound.
MOR74103
Unique battery post cuts power to
Roller Pilot Bearing the vehicle with the turn of a knob
MOR41100 and is a handy theft deterrent.
High-speed bearing is a direct
replacement in all Chevy V8s, 90° V6s, and 1976 and later Firewall Grommets
V6 Buicks. Eliminate premature bearing failure, ensure
clean clutch release, and maintain true disc to flywheel MOR39050
alignment. Bearing is packed with high temperature Thermoplastic grommets
grease. No modification to crank or input shaft is provide insulation
required. protection as well as
protection from chafing.
Outside dimensions range
Climbing Gear Lube from 1/2" to 1", inside dimension from .41" to .89". Pack of
MOR34800 25; five of each size.
A high-performance, extreme-pressure gear
lube is designed for manual transmissions Battery Cable Kit
as well as conventional and positive-traction
differentials. Increased speed of rotating MOR74005
parts causes film of oil to “climb” and spread Moroso 2-gauge copper battery
over surface for complete lubrication of cable kit will withstand the high
gears, bearings, bushings, shift yokes, and amperage loads necessary to
synchronizers. One-quart bottle. start high-performance racing
engines, even if the battery is
located in the trunk. The 20 feet
Replacement Ignition Module of cable includes four terminal ends.
MOR97857
Fits Moroso DuraFire Remote Fitting End Kit
distributors MOR72231 and any
4-pin GM HEI distributor for MOR74170
4-, 6-, and 8-cylinder engines. High-quality, screw-together
High-output module delivers consistent dwell, accurate
MOR68561 battery cable ends are ideal for
timing, extended durability, and high spark output. any side post battery connection or
for splicing in a battery disconnect
switch, remote jumper terminals, or
DuraFire Distributors junction blocks.
MOR72231
Complete Bolt-In Replacements Battery Post
for HEI Chevy V8s
Moroso’s DuraFire distributors are Terminal End Kit
equipped with everything needed to MOR74175
customize the ignition timing curve Similar to 74170, except these are
for street or strip. Features include designed for top-post batteries.
Moroso’s ProCoil that provides more
complete combustion for easier
starts, smoother idle, improved
Starter Heat Shield
acceleration, and more horsepower MOR74300
without vacuum advance. Aluminum shield provides protection
Not legal for sale or use on pollution- from heat on race car, tow vehicle, or
controlled vehicles. street car starters. Fits small and big
block Chevys using stock Delco starters.

2023 - 2024 HOT ROD AND EARLY MUSCLE 333

Carburetor Accessories Plastic and Phenolic
Carburetor Cover Carburetor Spacers
MOR65802 Carburetor spacers are made of
Keep dust and other foreign material out advanced plastic or phenolic
of carburetors during transport or storage. compounds with insulating
Made of durable, high-impact plastic, cover fits all properties ten times greater
carbs with 5-1/8" diameter neck. Installs with included than aluminum. Reduced fuel
thumbscrew. temperature results in a denser mixture
and more power. Spacers fit standard square
flange bolt pattern. Mounting hardware (less gaskets) is
Metering Plate Gasket included.
MOR65222 Part No. Description
Reusable metering plate gasket (108- MOR64930 1" Plastic, 4-Hole Plenum With 1.75" Bores
29) fits Holley 4150/4160 carbs. MOR64940 1" Plastic, Open Plenum
MOR64943 1/2" Phenolic, 4-Hole Plenum with 1.75" Bores
MOR64945 1/2" Phenolic, 4-Hole Plenum with 1.467" Bores
Float Bowl Gaskets
MOR65224 Aluminum Carburetor Spacers
Reusable float bowl gaskets (108-
32, 33) are made of a high-grade
Buna-N compound with an anti-
wicking nylon backing. Use with
alcohol or gasoline. Fits Holley 4150/4160 carbs. Two
gaskets per kit. MOR64970 MOR64980 MOR37950
Carburetor spacers extend the length of the intake
Float Bowl Washer Kit column to improve fuel distribution on 4-barrel
MOR65225 manifolds. Moroso spacers include dowel pins for
Nylon float bowl washer kit fits Holley positive alignment. For use with standard flange 4-barrel
carburetors (10-pack). carburetors.
Part No. Description
MOR64970 2" Tall Fits Holley 4150/4160, AFB, Edelbrock, Open Plenum
Clear-View Sight Plugs MOR64980 1" Tall Fits Holley 4150/4160, AFB, Edelbrock, Open Plenum
MOR65226 MOR37950 Stud Kit, 5/16" x 1-3/8" Long, 4-Pack
Note: 2" tall spacers require two stud kits.
Clear sight plugs fit Holley carburetors
(2-pack).
Exhaust Block-Off Storage Plates
Throttle Return Spring Kit Precision-machined durable aluminum plates keep
engines sealed up from foreign contaminants during
MOR64925 storage or when painting.
Return spring kit fits Holley 2-
or 4-barrel single carburetors
for small block Chevy V8 and
90° V6. Chrome brackets
bolt to water outlet and
throttle arm. Kit includes two
bushings and fasteners. MOR25154

Part No. Description

Throttle Return Spring Kit MOR25154 Nissan/Datsun L24/L26/L28, Single
MOR64927 MOR25155 SB Chevy, Conventional 23° Cyl. Heads, Pair
MOR25157 GM LS, Pair
Throttle return spring kit MOR25158 GM LT1, Pair
works with Holley 2300 or 2305 MOR25160 BB Chevy Gen IV
series 2-barrels as well as MOR25165 SB Chrysler 273-360, Pair
4150 and 4160 series 4-barrel MOR25166 BB Chrysler 361-440, Pair
carburetors. Heavy and light MOR25168 Chrysler Gen. III Hemi 5.7/6.2/6.4L, Pair
springs are included. MOR25169 SB Ford 260-351W, Conventional Heads, Pair
MOR25170 Ford Modular 4.6/5.4L, Pair
MOR25171 Ford Coyote 5.0L, Pair
Carburetor Linkage Bushing Set MOR25172 BB Ford "FE" 390-428, Pair
MOR64920 MOR25173 BB Ford 429-460, Conventional Heads, Pair
Steel linkage bushing set adapts a
1/4" fastener to the 1/2" diameter hole
found in the throttle linkage arm on
Holley carburetors.

334 2023 - 2024 HOT ROD AND EARLY MUSCLE

Engine Storage Plate for GM LS Engines Spark Plug Wire Tools and Accessories

High-Temperature Boot Sleeves

Sleeves protect spark plug
boots up to 1200°F and are
1" I.D. x 5-3/4" long (sold in
pairs)
MOR25179
Conveniently seal off the lifter valley area from dirt and .
foreign objects when in storage. Made of corrosion-
Part No. Description
resistant zinc-plated 1/8” thick steel, plate includes all MOR71992 High-Temp Boot Sleeves, Blue
mounting hardware. Fits LS1, LS2, LS6, and C5R engines. MOR71993 High-Temp Boot Sleeves, Red
MOR71994 High-Temp Boot Sleeves, Black

Wheel Studs Insulated Wire Sleeve and Shrink Sleeves

Moroso wheel studs are manufactured from high-grade Insulated sleeve protects plug wires
SAE 8740 steel to withstand shear loads of 190,000 PSI and from header heat and adds up to
(exceeding Grade 8 specs). Use studs with “thick hub” 8,000 Ohms of insulation. Sleeve is
wheels, 5 per package. packaged in 25 foot rolls and available
to fit 7mm, 8mm, or 8.65mm wires. For
MOR46150 best results in sealing the plug wire to MOR72002
Press-in 7/16"-20 x 2-7/8" stud with the boot, use Moroso's shrink sleeves.
a .480" diameter knurl fits most late Part No. Description
model GM drum brake hubs. Requires hole size of .472" MOR72000 Wire Sleeve, Fits 7 and 8mm Diameter Wire, Blue
MOR72002 Wire Sleeve, Fits 7 and 8mm Diameter Wire, Red
to .479".
MOR72011 Wire Sleeve, Fits 8.65mm Diameter Ultra 40 Wire, Blue
MOR72030 Shrink Sleeves, Blue, 18-Pack
MOR46160 MOR72031 Shrink Sleeves, Black, 18-Pack
Press-in 7/16" x 2-7/8"stud with a MOR72020
Shrink, Wire Cylinder Markers, Marked 1 through 8,
.560" diameter knurl fits most late Two Each
model GM disc brake and early drum brake hubs. Required
hole size is .552" to .559". Spark Plug Wire Tools and Looms
Wire Building Tools
MOR46180
Press-in 1/2"-20 x 3" stud with .615" MOR62260
diameter knurl fits most disc brake
Ford front and rear and Chrysler front hubs. Hole size is
.606" to .613".
MOR62268

MOR46190
Press-in 1/2"-20 x 3" stud with .685"
diameter knurl fits most Chrysler Part No. Description
MOR62260 General Purpose Wire Crimper
rears with 1/2" stud. Hole size is .676" to .683".
MOR62268 Super-Duty Ratcheting Wire Crimper
Note: Stud lengths are measured from the base of the knurl to the end of the stud. Do not use
these studs with wheel spacers.
Universal Loom Kits
Kits include four 2-hole looms, two 3-hole looms, and four
chrome-plated brackets which secure to the valve cover
bolts.

Part No. Description

MOR72150 Blue, Universal Loom Kit, 7-9mm
MOR72151 Red, Universal Loom Kit, 7-9mm
MOR72153 Black, Universal Loom Kit, 7-9mm

2023 - 2024 HOT ROD AND EARLY MUSCLE 335

Show Car Loom Kits Small Block Chevy
Kits include eight 2-hole looms, two 4-hole separators,
and four chrome-plated brackets which secure to valve Center Bolt Loom Kits
cover bolts. Designed for small block Chevys using center bolt valve
covers, kit includes two right side and two left side
chrome plated brackets, two 4-hole looms, six 2-hole
looms, two 4-hole separators, and two 2-hole separators.

Part No. Description

MOR72170 Blue, Show Car Loom Kit, 7-9mm
MOR72168 Red, Show Car Loom Kit, 7-9mm
MOR72167 Black, Show Car Loom Kit, 7-9mm Part No. Description
MOR72140 Blue, Small Block Chevy, Center Bolt, 7-9mm
Big Block Chevy Loom Kits MOR72141 Red, Small Block Chevy, Center Bolt, 7-9mm
MOR72143 Black, Small Block Chevy, Center Bolt, 7-9mm
Kits include four right side and four left side chrome-
plated brackets, two 1-hole looms, two 2-hole looms, two
3-hole looms, two 4-hole looms, two 4-hole separators, Four-Hole Universal Loom Kits
and two 2-hole separators. Includes two chrome-plated brackets and two 4-hole
looms.

Part No. Description Part No. Description

MOR72175 Blue, Big Block Chevy Loom Kit, 7-9mm MOR72180 Blue, Four-Hole Loom Kit, 7-9mm
MOR72176 Red, Big Block Chevy Loom Kit, 7-9mm MOR72181 Red, Four-Hole Loom Kit, 7-9mm
MOR72178 Black, Big Block Chevy Loom Kit, 7-9mm MOR72183 Black, Four-Hole Loom Kit, 7-9mm

Super Loom Kits Replacement Wire Looms

Includes two right-side and two left-side chrome-plated Looms are direct replacements for Moroso loom kits and
brackets, two 4-hole looms, six 2-hole looms, two 4-hole fit other brand loom kits, packaged two per card.
separators, and two 2-hole separators. Part No. Description
MOR97830 Blue, 2-Hole, 7-9mm
MOR97832 Blue, 4-Hole, 7-9mm
MOR97833 Red, 2-Hole, 7-9mm
MOR97835 Red, 4-Hole, 7-9mm

Replacement Wire Separators

Packages include two each of 2-hole, 3-hole, and 4-hole
Part No. Description separators, for use with 7-9mm wires.
MOR72171 Blue, Super Loom Kit, 7-9mm
MOR72172 Red, Super Loom Kit, 7-9mm
MOR72174 Black, Super Loom Kit, 7-9mm

Small Block Ford Loom Kits

Includes three 4-hole looms, one 3-hole loom, one 2-hole Part No. Description
loom, one 1-hole loom, two 4-hole separators, one 3-hole MOR72160 Blue, Wire Separators, 7-9mm
separator, one 2-hole separator, and six chrome- plated MOR72161 Red, Wire Separators, 7-9mm
brackets. MOR72163 Black, Wire Separators, 7-9mm

Part No. Description

MOR72130 Blue, Small Block Ford Loom Kit, 7-9mm
MOR72131 Red, Small Block Ford Loom Kit, 7-9mm
MOR72133 Black, Small Block Ford Loom Kit, 7-9mm

336 2023 - 2024 HOT ROD AND EARLY MUSCLE

Ultra 40 Race Wire Sets Blue Max Spiral Core Sleeved Wire Sets
Plug wire sets are 7mm or Custom fit, sleeved plug wire
8.65mm diameters (7mm sets sets are 8mm diameter
fit factory wire looms) and have with corrosion-
nickel-copper alloy for high resistant spark
spark energy. Sets feature high plug terminals,
temp +600°F silicone boots, high-temp
only 40 Ohms of resistance silicone boots,
per foot, Kevlar center core for 800-Ohm wire, shrink tubing,
ultra-high tensile strength, and MOR73600 and cylinder markers. Sleeving adds 8,000 -Ohms of
are spiral wound for minimized RF interference. Sets are insulation. All sets are Moroso's blue color.
available in universal or custom fit, with or without heat Part No. Description
sleeving. SB Chevy, 8mm, Sleeved,
MOR72402
Part No. Description Over Valve Covers, 90° Plug/HEI Cap
MOR73536 GM LS-Series, 7mm, Sleeved, 12.0" Wire Length SB Chevy, 8mm, Sleeved,
MOR72405
MOR73811 GM LS-Series, 7mm, No Sleeve, Universal Kit, 48" Wire Lengths Under Headers, 90° Plug/Socket Cap
SB Chevy, 8.65mm, Sleeved,Over Valve Covers, 90° Plug/ SB Chevy, 8mm, Sleeved,
MOR73600 MOR72407
Socket Cap Under Headers, 90° Plug/HEI Cap
MOR73602 SB Chevy, 8.65mm, Sleeved, Over Valve Covers, 90° Plug/HEI Cap BB Chevy, 8mm, Sleeved,
MOR72416
Under Headers, 90° Plug/HEI Cap
MOR73605 SB Chevy, 8.65mm, Sleeved,Under Header, 90° Plug/Socket Cap
SB Ford 289-302, 8mm, Sleeved,
MOR73607 SB Chevy, 8.65mm, Sleeved, Under Header, 90° Plug/HEI Cap MOR72430
Over Valve Covers, 135° Plug/HEI Cap
BB Chevy, 8.65mm, Sleeved, Over Valve Covers, Straight Plug/
MOR73615 SB Ford 351W, 8mm, Sleeved,
HEI cap MOR72426
Over Valve Covers, 135° Plug/HEI Cap
MOR73616 BB Chevy, 8.65mm, Sleeved, Under Header, 90° Plug/HEI Cap
MOR73630 SB Ford 289-302, 8.65mm, Sleeved, 135° Plug/HEI Cap
MOR73626 SB Ford 351W, 8.65mm, Sleeved, 135° Plug/HEI Cap Blue Max Spiral Core Universal Wire Sets
MOR73800 Universal, No Sleeve, 90° Plug/Socket and HEI Cap Universal fit plug wire sets are
MOR73801 Universal, No Sleeve, Straight Plug/Socket and HEI Cap 8mm or 11mm in diameter and
MOR73802 Universal, No Sleeve, 135° Plug/Socket and HEI Cap feature snap-on plug terminals,
high-temp silicone plug boots,
Blue Max Spiral Core Vehicle-Specific Wire 800 OHM wire and high dielectric
Sets for 1986-94 Ford Mustang 5.0L distributor boots. Sets are available in blue, red, yellow
and black.
MOR72645
Part No. Description
Vehicle-specific plug MOR73225 8mm, 90° Plug/Socket and HEI Cap, Blue
wire sets are 8mm in MOR73217 8mm, 90° Plug/Socket and HEI Cap, Yellow
diameter and feature MOR73219 8mm, 90° Plug/Socket and HEI Cap, Red
snap-on plug terminals, MOR73231 8mm, 90° Plug/Socket and HEI Cap, Black
high-temp silicone plug MOR73226 8mm, Straight Plug/Socket and HEI Cap, Blue
boots, 800-Ohm wire, MOR73218 8mm, Straight Plug/Socket and HEI Cap, Red
high-temp silicone plug MOR73232 8mm, Straight Plug/Socket and HEI Cap, Black
boots, and high-dielectric distributor boots. All sets are MOR73220 8mm, 135° Plug/Socket and HEI Cap, Blue
MOR73214 8mm, 135° Plug/Socket and HEI Cap, Red
Moroso's blue color.
MOR73233 8mm, 135° Plug/Socket and HEI Cap, Black
Note: Wire sets for earlier vehicles are also available. Please call for details!

Ultra Spark Plug Wire Sets

Designed to meet or exceed auto manufacturers’ specifications while offering a
cost-effective price. Available in red or black wiring. Select applications are available
with high-temperature sleeving. Made in the USA.
Part No. Description Dia. Boot Type Terminal
Black
MOR51000 Universal 8-Cylinder 8 mm Straight HEI Socket Style
MOR51001 Universal 8-Cylinder 8 mm Straight HEI Style Terminal
MOR51002 Universal 8-Cylinder 8 mm Straight Socket Style
MOR51003 Universal 6-Cylinder 8 mm Straight Socket Style
MOR51004 Universal 4-Cylinder 8 mm Straight Socket Style
MOR51005 Universal 8-Cylinder 8 mm 90° HEI Socket Style
MOR51006 Universal 8-Cylinder 8 mm 90° HEI Style Terminal
MOR51007 Universal 8-Cylinder 8 mm 90° Socket Style
MOR51008 Universal 8-Cylinder 8 mm 135° HEI Socket Style
MOR51009 Universal 8-Cylinder 8 mm 135° HEI Style Terminal
MOR51010 Universal 8-Cylinder 8 mm 135° Socket Style MOR51000
MOR51011 GM LS-Series 8 mm 135° Factory Style Boots
MOR51025 Small Block Chevy, Over the Valve Cover 8 mm 90° HEI Style Terminal
MOR51026 Small Block Chevy, Over the Valve Cover 8 mm 90° Socket Style
MOR51027 Small Block Chevy, Over the Valve Cover 8 mm 135° HEI Style Terminal

2023 - 2024 HOT ROD AND EARLY MUSCLE 337

Ultra Spark Plug Wire Sets Continued
Part No. Description Dia. Boot Type Terminal
MOR51028 Small Block Chevy, Under the Header 8 mm 90° HEI Style Terminal
MOR51029 Small Block Chevy, Under the Header 8 mm 90° Socket Style
MOR51030 Small Block Chevy, Under the Header 8 mm 135° HEI Style Terminal
MOR51032 GM LS-Series, 9.75 in Long 7 mm 90° Factory Style Boots
MOR51034 GM LS-Series, 11.00 in Long 7 mm 90° Factory Style Boots
MOR51040 Big Block Chevy, Over the Valve Cover 8 mm Straight HEI Style Terminal
MOR51041 Big Block Chevy, Over the Valve Cover 8 mm Straight Socket Style
MOR51042 Big Block Chevy, Over the Valve Cover 8 mm 135° HEI Style Terminal
MOR51043 Big Block Chevy, Under the Header 8 mm 90° HEI Style Terminal
MOR51044 Big Block Chevy, Under the Header 8 mm 90° Socket Style
MOR51045 Big Block Chevy, Under the Header 8 mm 135° HEI Style Terminal
MOR51055 Small Block Mopar 8 mm Straight HEI Style Terminal
MOR51056 Small Block Mopar 8 mm Straight Socket Style
MOR51060 Mopar B/RB-Series 8 mm Straight HEI Style Terminal
MOR51061 Mopar B/RB-Series 8 mm Straight Socket Style
MOR51070 Small Block Ford 8 mm 135° HEI Style Terminal MOR51071
MOR51071 Small Block Ford 8 mm 135° Socket Style
MOR51072 Small Block Ford 8 mm 135° HEI Style Terminal
MOR51073 Small Block Ford 8 mm 135° Socket Style
MOR51074 Big Block Ford 8 mm 135° HEI Style Terminal
MOR51075 Big Block Ford 8 mm 135° Socket Style
Red
MOR52000 Universal 8-Cylinder 8 mm Straight HEI Socket Style
MOR52001 Universal 8-Cylinder 8 mm Straight HEI Style Terminal
MOR52002 Universal 8-Cylinder 8 mm Straight Socket Style
MOR52003 Universal 6-Cylinder 8 mm Straight Socket Style
MOR52004 Universal 4-Cylinder 8 mm Straight Socket Style
MOR52005 Universal 8-Cylinder 8 mm 90° HEI Socket Style
MOR52006 Universal 8-Cylinder 8 mm 90° HEI Style Terminal
MOR52007 Universal 8-Cylinder 8 mm 90° Socket Style
MOR52008 Universal 8-Cylinder 8 mm 135° HEI Socket Style
MOR52009 Universal 8-Cylinder 8 mm 135° HEI Style Terminal
MOR52010 Universal 8-Cylinder 8 mm 135° Socket Style
MOR52011 GM LS-Series 8 mm 135° Factory Style Boots
MOR52025 Small Block Chevy, Over the Valve Cover 8 mm 90° HEI Style Terminal
MOR52026 Small Block Chevy, Over the Valve Cover 8 mm 90° Socket Style
MOR52027 Small Block Chevy, Over the Valve Cover 8 mm 135° HEI Style Terminal
MOR52028 Small Block Chevy, Under the Header 8 mm 90° HEI Style Terminal
MOR52029 Small Block Chevy, Under the Header 8 mm 90° Socket Style
MOR52030 Small Block Chevy, Under the Header 8 mm 135° HEI Style Terminal
MOR52032 GM LS-Series, 9.75" Long 7 mm 90° Factory Style Boots
MOR52034 GM LS-Series, 11.00" Long 7 mm 90° Factory Style Boots
MOR52000
MOR52040 Big Block Chevy, Over the Valve Cover 8 mm Straight HEI Style Terminal
MOR52041 Big Block Chevy Over the Valve Cover 8 mm Straight Socket Style
MOR52042 Big Block Chevy, Over the Valve Cover 8 mm 135° HEI Style Terminal
MOR52043 Big Block Chevy, Under the Header 8 mm 90° HEI Style Terminal
MOR52044 Big Block Chevy, Under the Header 8 mm 90° Socket Style
MOR52045 Big Block Chevy, Under the Header 8 mm 135° HEI Style Terminal
MOR52055 Small Block Mopar 8 mm Straight HEI Style Terminal
MOR52056 Small Block Mopar 8 mm Straight Socket Style
MOR52060 Mopar B / RB-Series 8 mm Straight HEI Style Terminal
MOR52061 Mopar B / RB-Series 8 mm Straight Socket Style
MOR52070 Small Block Ford 8 mm 135° HEI Style Terminal
MOR52071 Small Block Ford 8 mm 135° Socket Style
MOR52072 Small Block Ford 8 mm 135° HEI Style Terminal
MOR52073 Small Block Ford 8 mm 135° Socket Style
MOR52074 Big Block Ford 8 mm 135° HEI Style Terminal
MOR52075 Big Block Ford 8 mm 135° Socket Style
Black with High-Temperature Sleeving
MOR51525 Small Block Chevy, Over the Valve Cover 8 mm 90° HEI Style Terminal
MOR51526 Small Block Chevy, Over the Valve Cover 8 mm 90° Socket Style
MOR51527 Small Block Chevy, Over the Valve Cover 8 mm 135° HEI Style Terminal
MOR51528 Small Block Chevy, Under the Header 8 mm 90° HEI Style Terminal
MOR51529 Small Block Chevy, Under the Header 8 mm 90° Socket Style
MOR51530 Small Block Chevy, Under the Header 8 mm 135° HEI Style Terminal
MOR51532 GM LS-Series, 9.75" Long 7 mm 90° Factory Style Boots
MOR51534 GM LS-Series, 11.00" Long 7 mm 90° Factory Style Boots
MOR51540 Big Block Chevy, Over the Valve Cover 8 mm Straight HEI Style Terminal
MOR51541 Big Block Chevy, Over the Valve Cover 8 mm Straight Socket Style
MOR51542 Big Block Chevy, Over the Valve Cover 8 mm 135° HEI Style Terminal
MOR51525

338 2023 - 2024 HOT ROD AND EARLY MUSCLE

Ultra Spark Plug Wire Sets Continued
Part No. Description Dia. Boot Type Terminal
MOR51543 Big Block Chevy, Under the Header 8 mm 90° HEI Style Terminal
MOR51544 Big Block Chevy, Under the Header 8 mm 90° Socket Style
MOR51545 Big Block Chevy, Under the Header 8 mm 135° HEI Style Terminal
MOR51555 Small Block Mopar 8 mm Straight HEI Style Terminal
MOR51556 Small Block Mopar 8 mm Straight Socket Style
MOR51560 Mopar B / RB-Series 8 mm Straight HEI Style Terminal
MOR51561 Mopar B / RB-Series 8 mm Straight Socket Style
MOR51570 Small Block Ford 8 mm 135° HEI Style Terminal
MOR51571 Small Block Ford 8 mm 135° Socket Style
MOR51572 Small Block Ford 8 mm 135° HEI Style Terminal
MOR51573 Small Block Ford 8 mm 135° Socket Style
MOR51574 Big Block Ford 8 mm 135° HEI Style Terminal
MOR51575 Big Block Ford 8 mm 135° Socket Style
Red with High-Temperature Sleeving
MOR52525 Small Block Chevy, Over the Valve Cover 8 mm 90° HEI Style Terminal
MOR52526 Small Block Chevy, Over the Valve Cover 8 mm 90° Socket Style
MOR52527 Small Block Chevy, Over the Valve Cover 8 mm 135° HEI Style Terminal
MOR52528 Small Block Chevy, Under the Header 8 mm 90° HEI Style Terminal
MOR52529 Small Block Chevy, Under the Header 8 mm 90° Socket Style
MOR52530 Small Block Chevy, Under the Header 8 mm 135° HEI Style Terminal
MOR52532 GM LS-Series, 9.75" Long 7 mm 90° Factory Style Boots
MOR52534 GM LS-Series, 11.00" Long 7 mm 90° Factory Style Boots
MOR52540 Big Block Chevy, Over the Valve Cover 8 mm Straight HEI Style Terminal
MOR52541 Big Block Chevy, Over the Valve Cover 8 mm Straight Socket Style
MOR52542 Big Block Chevy, Over the Valve Cover 8 mm 135° HEI Style Terminal
MOR52543 Big Block Chevy, Under the Header 8 mm 90° HEI Style Terminal
MOR52544 Big Block Chevy, Under the Header 8 mm 90° Socket Style
MOR52545 Big Block Chevy, Under the Header 8 mm 135° HEI Style Terminal
MOR52555 Small Block Mopar 8 mm Straight HEI Style Terminal
MOR52556 Small Block Mopar 8 mm Straight Socket Style
MOR52560 Mopar B / RB-Series 8 mm Straight HEI Style Terminal
MOR52561 Mopar B / RB-Series 8 mm Straight Socket Style
MOR52570 Small Block Ford 8 mm 135° HEI Style Terminal MOR52525
MOR52571 Small Block Ford 8 mm 135° Socket Style
MOR52572 Small Block Ford 8 mm 135° HEI Style Terminal
MOR52573 Small Block Ford 8 mm 135° Socket Style
MOR52574 Big Block Ford 8 mm 135° HEI Style Terminal
MOR52575 Big Block Ford 8 mm 135° Socket Style

Hydraulic Brake and Clutch

Pressure Bleeder Power Extractor™
The easiest way to bleed brakes or clutch MTP1702
cylinders. One person can operate the The hand pump creates a vacuum to extract
Power Bleeder™ to flush the entire system engine oil, transmission fluid, brake fluid,
in minutes. Includes HDPE tank for use with coolant and other fluids. A dipstick tube
standard or synthetic fluids, built-in hand for changing oil and stretchable tubing for
pump, and integrated pressure gauge for safe vacuum brake bleeding are included. Tank
operation. Available for many vehicles. has an eight-quart capacity and includes a
Part No. Description pressure gauge and carrying handle.
MTP0100 Most Tilton and Wilwood with 45mm Threaded Reservoir Caps
Most Tilton and Wilwood with 45mm Threaded Reservoir Caps
MTP0109 (Includes Extra Long Tubing and Machined Aluminum Cap with Deluxe
Swivel Fitting)
MTP0101
Late Model American Cars with 3-1/4" Or Smaller Round Reservoir Catch Bottle Kit
Caps
Late Model Chrysler Vehicles with Round 3-Tab Reservoir Caps
MTP1820
MTP0103 A stainless lanyard holds the
Including Tandem Caps
Domestic Cars with Rectangular or Elongated Master Cylinder bottle and a return nipple
MTP0105 Reservoirs up to 4-1/4" x 6-3/4", Many 1967-Mid 80s Ford, GM and prevents spills. Set of two.
Chryslers
Late Model Fords and Some Late Model Chryslers with 3-Tab
MTP0107
Reservoir Cap

2023 - 2024 HOT ROD AND EARLY MUSCLE 339

Performance Rear End Covers C-Clip Eliminator Kits
Aluminum rear end covers improve ring Eliminates the factory C-clip and
and pinion life by reducing gear deflection. provides a safety hub with sealed, press-on
Covers weigh just 6 pounds and include bearings. Required when replacing original C-clip
bolts, washers, and gasket. axles with aftermarket performance units. Sold in pairs.
Part No. Description Part No. Description
MEI7105 10-Bolt GM, 7.5" All GM 10/12-Bolt,
MEI9000
MEI7106 8.8" Ford Exc. Impala or Trucks, For Moser Axles, 1.533" Seat
MEI7107 10-Bolt GM, including 8.2" and 8.5" Axles All GM 10/12-Bolt,
MEI9200
MEI7110 12-Bolt Chevy, Passenger Only Exc. Impala or Trucks, for Stock Axles, 1.400" Seat
MEI7112 Dana 60 MEI9300 Ford 7.5"/8.8" Mustang/Capri, for Stock Axles, 1.400" Seat

Axle Bearings, Housing Ends, and Retainer Plates

Part No. Description
Axle Bearings
MEI9400M 8-3/4" Chrysler/Dana 60, Non-Adjustable, with Snap Ring, 2.875" OD/1.562" ID
MEI9507F Small Ford, Stock 1.377" ID
MEI9508B Big Ford; Olds/Pontiac Ball Bearing, 3.150" OD/1.531" ID
MEI9508T Big Ford; Olds/Pontiac Ball Bearing, 3.150" OD/1.562" ID
Housing Ends
MEI7750 Big Ford, New Style (Torino)
MEI7800 Big Ford, 1/2" Holes
Retainer Plates
MEI9750 Small/Big Ford, New Style (Torino)
MEI9800 Big Ford, 1/2" Holes

C-Clip Axles
Replacement axles are made of forged steel with non-tapered, hardened bearing seats, and machined
C-clip grooves for use with stock carriers. Sold in pairs, unless specified.
Part No. Description Applications
MEIA102601 10-Bolt 7.5" GM 26-Spline Axles, 28-7/16" 1978-81 Malibu/Cutlass/Grand Prix/Regal
MEIA102803 10-Bolt 8.5" GM 28-Spline Axles, 30-1/16" 1970-81 Camaro/Firebird; 1968-72 Chevelle/Skylark/Cutlass/LeMans
MEIA102812-1* 10-Bolt 8.5" GM 28-Spline Axle (Single), 30-5/16" 1973-77 Monte Carlo/Malibu/Regal/Cutlass/Grand Am
* Sold Individually

PowerBall Polishing Tool PowerBall 4Lights

Polish aluminum billet and
diamond plate as well as stainless Headlight Restoration Kit
steel with the PowerBall. Requires MTH07251
a 3/8" drill. For best results, Removes scratches, yellowing, and other
use with Mothers PowerMetal discoloration on headlights. Works on all
aluminum polish. types of plastic and acrylic headlights.
Part No. Description Includes polishing tool, PowerPlastic polish,
MTH05140 PowerBall Polishing Ball two restoration pads, and 15" x15" microfiber
MTH05141 PowerBall Mini Polishing Ball towel. Use with drill.
Powerball 2
MTH05143
(Offers More Usable Area)
MTH05146 Powerball Polishing Cone CMX Ceramic Spray Coating
MTH01024
PowerPlastic 4Lights® Mothers CMXTM ceramic spray coating is
MTH08808 an affordable, user-friendly, professional-
Quickly and easily polish a variety of hard or grade, ultra-durable, super-hydrophobic
flexible clear plastics in one step. It features a protection formula. Just spray on and wipe
special blend of oxidation inhibiting polymers, off!
UV shields and an ultra-fine polish that work
in unison to clean and clarify headlights,
taillights and more. 8-ounce bottle.

340 2023 - 2024 HOT ROD AND EARLY MUSCLE

Polishes, Waxes, and Cleaners
Part No. Description MTH09224 MTH06024
MTH05100 Mag and Aluminum Polish, 5 oz. Part No. Description
MTH05101 Mag and Aluminum Polish, 10 oz. MTH06024 Polished Aluminum Wheel Cleaner, 24 oz.
MTH05112 California Gold Metal Polish, 12 oz. MTH06110 Back to Black Restorer, 10 oz.
MTH05212 California Chrome Polish, 12 oz. MTH06208 Plastic Polish, 8 oz.
MTH05222 California Gold® All Chrome, 12 oz. MTH06312 Leather Conditioner, 12 oz.
MTH05316 Protectant, 16 oz. MTH06412 Leather Cleaner, 12 oz.
MTH05500 California Gold® Carnauba Cleaner Wax, Paste, 12 oz. MTH06512 All-In-One Leather Care, 12 oz.
MTH05600 California Gold® Car Wash, 16 oz. MTH06524 VLR Vinyl Leather Rubber Care, 24 oz.
MTH05632 California Gold® Car Wash, 32 oz. MTH06924 Back to Black Tire Shine, 24 oz.
MTH05644 California Gold® Waterless Wash and Wax, 12 oz. MTH07100 California Gold® Pre-Wax Cleaner - Step 1, 16 oz.
MTH05674 California Gold® Carnauba Wash and Wax, 64 oz. MTH08100 California Gold® Sealer And Glaze - Step 2, 16 oz.
MTH05701 California Gold® Carnauba Cleaner Wax, Liquid, 16 oz. MTH05550 California Gold® Pure Carnauba Wax - Step 3, Paste, 12 oz.
MTH05716 California Gold Synthetic Wax, 16 oz. MTH08216 California Gold® Showtime® Instant Detailer, 16 oz.
MTH05724 California Gold® Spray Wax, 24 oz. MTH09224 R3 Racing Rubber Remover, 24 oz.
MTH05750 California Gold® Pure Carnauba Wax - Step 3, Liquid, 16 oz. MTH09324 Back to Black Tire Renew 24 oz.
MTH05824 Wheel Mist® Chrome/Wire, 24 oz. MTH18324 Speed Interior Detailer, 24-oz. Bottle
MTH05924 Wheel Mist® All Wheel, 24 oz. MTH09324 Speed All Purpose Cleaner, 24-oz. Spray Bottle

Ring and Pinion Sets

Heavy-duty standard-weight
ring and pinion sets are made of
8620 steel and heat treated for
extra strength and durability.
Full Spools and Mini Spools
Popular with dirt track racers, drag racers, DANA 60
and off-road competitors, spools are an economical and
10-3/4" x 11-1/2" oval, 1966-72 passenger cars, 10-bolt.
effective alternative to limited slip differentials as a traction
and performance enhancement. Motive Gear spools are Part No. Ratio Teeth Description
MOTD60-373 3.73 41-11 Ring and Pinion Set
manufactured from durable 4140 forged steel that has been
MOTRA29RMK — — Master Installation Kit
fully heat treated and CNC-machined, resulting in decreased
deflection and increased gear life. Spools are offered for
a wide variety of applications in standard and lightweight Chrysler 8.75"
versions. (489) Early housing, 8-11/16" x 10-19/32" cover,
1957-1968 passenger cars, 10-bolt.
Part No. Description
Full Spools Part No. Ratio Teeth Description
MOTFS10-28 GM 8.5" 10-Bolt, 28-Spline MOTC887355L 3.55 39-11 Ring and Pinion Set
MOTFS10-30 GM 8.5" 10-Bolt, 30-Spline MOTC887373L 3.73 41-11 Ring and Pinion Set
MOTFS8.8-31 Ford 8.8", 31-Spline MOTC887410L 4.10 41-10 Ring and Pinion Set
MOTFS9-28LW Ford 9", 28-Spline, Lightweight MOTR8.75RLMK — — Master Installation Kit
MOTFS9-31LW Ford 9", 31-Spline, Lightweight
Mini Spools Chrysler 8.75"
MOTMS10-28 GM 8.5" 10-Bolt, 28-Spline (742) Early Housing, 8-11/16" x 10-19/32" Cover,
MOTMS10C-28 GM 8.2" 10-Bolt, 28-Spline
1957-1968 Passenger Cars, 10 Bolt
MOTMS12C GM 8.875" 12-Bolt, 30-Spline
MOTMS7.5-26 GM 7.5" 10-Bolt, 26-Spline Part No. Ratio Teeth Description
MOTMS7.5-28 GM 7.5" 10-Bolt, 28-Spline MOTC887373E 3.73 41-11 Ring and Pinion Set
MOTMS88-28 Ford 8.8", 28-Spline
MOTMS88-31 Ford 8.8", 31-Spline Chrysler 8.75"
MOTMS9-28 Ford 9", 28-Spline, Lightweight (741) Early housing, 8-11/16" X 10-19/32" cover, 1957-68
MOTMS9-31 Ford 9", 31-Spline, Lightweight passenger cars, 10-bolt.
Part No. Ratio Teeth Description
Spider Gears MOTC887355M 3.55 39-11 Ring and Pinion Set
Kits include all of the components required MOTR8.75RMMK — — Master Installation Kit
to replace the axle and spidergears in
popular differentials. Each kit includes Ford 8"
axle gears, spider gears, axle and spider 11" cover, 1962-69 passenger cars, 10-bolt.
gear washers, cross pin, and cross pin
Part No. Ratio Teeth Description
retaining bolt. Kits are offered for open MOTF880325 3.25 39-12 Ring and Pinion Set
differentials only. MOTF880355 3.55 39-11 Ring and Pinion Set
Part No. Description MOTF880380 3.80 38-10 Ring and Pinion Set
MOTF8.8BI Ford 8.8", 31-Spline Axles, Open Differential, 1987-Up MOTRA310RMK — — Master Installation Kit
MOTGM10BI GM 8.5" 10-Bolt, 28-Spline Axles, Open Differential, 1972-87
MOTGM10BI-30 GM 8.5" 10-Bolt, 30-Spline Axles, Open Differential, 1988-99
MOTGM7.5BI GM 7.5" 10-Bolt, 26-Spline Axles, Open Differential, 1975-88

2023 - 2024 HOT ROD AND EARLY MUSCLE 341

Ford 8.8" GM 8.20" B.O.P.
10-9/16" X 10-13/16" cover. 10-5/8" irregular, 1964-71 Buick, Olds, & Pontiac, 10-bolt.
Part No. Ratio Teeth Description Part No. Ratio Teeth Description
MOTF888355 3.55 39-11 Ring and Pinion Set MOTBP882355 3.55 39-11 Ring and Pinion Set
MOTF888373 3.73 41-11 Ring and Pinion Set MOTBP882373 3.73 41-11 Ring and Pinion Set
MOTF888390 3.90 43-11 Ring and Pinion Set MOTR8.5PRMK — — Master Installation Kit
MOTF888410 4.10 41-10 Ring and Pinion Set
MOTF888456 4.56 41-9 Ring and Pinion Set GM 8.20"
MOTF8.8BI — — Differential Gear Kit, 31 Spline (Open)
10-5/8" irregular or 11" oval, 1964-72 Chevy cars, 10-bolt.
MOTF8.8CPK — — Clutch Pack, 31 Spline
MOTR8.8RMK — — Master Installation Kit Part No. Ratio Teeth Description
MOTG882336 3.36 37-11 Ring and Pinion Set
MOTG882355 3.55 39-11 Ring and Pinion Set
Ford 9" MOTG882411 4.11 37-9 Ring and Pinion Set
11-3/4" cover, passenger cars, 10-bolt. MOTR10CRMK — — Master Installation Kit
Part No. Ratio Teeth Description
MOTF890325 3.25 39-12 Ring and Pinion Set GM 8.5"
MOTF890350 3.50 35-10 Ring and Pinion Set
11" cover, 1970-92 passenger cars, 10-bolt.
MOTF890370 3.70 37-10 Ring and Pinion Set
MOTF890411 4.11 37-9 Ring and Pinion Set Part No. Ratio Teeth Description
MOTF890430 4.30 43-10 Ring and Pinion Set MOTG885342 3.42 41-12 Ring and Pinion Set
MOTF890457 4.57 32-7 Ring and Pinion Set MOTG885373 3.73 41-11 Ring and Pinion Set
MOTR9R28MK — — 28-Spline Axle Master Installation Kit MOTG885410 4.10 41-10 Ring and Pinion Set
MOTR9RMK — — 31-Spline Axle Master Installation Kit MOTG885456 4.56 41-9 Ring and Pinion Set
MOTR10RMK — — Master Installation Kit
MOTGM10BI — — Differential Gear Kit, 28 Spline (Open)
GM 7.5" - 7.625" MOTGM10BI-30 — — Differential Gear Kit, 30 Spline (Open)
8-5/16" x 10-9/16" passenger cars, 10-bolt 3.23 & up.
Part No. Ratio Teeth Description GM 8.875"
MOTG875342 3.42 41-12 Ring and Pinion Set
10-7/8" cover, 1965-72 passenger cars, 12-bolt.
MOTG875373 3.73 41-11 Ring and Pinion Set
MOTG875390 3.90 43-11 Ring and Pinion Set Part No. Ratio Teeth Description
MOTG875410 4.10 41-10 Ring and Pinion Set MOTG888355 3.55 39-11 Ring and Pinion Set
MOTGM7.5BI — — Differential Gear Kit, 26 Spline (Open) MOTG888373 3.73 41-11 Ring and Pinion Set
MOTR7.5GRBMK — — 1977-81 Master Installation Kit MOTG888411 4.10 41-10 Ring and Pinion Set
MOTR7.5GRLMK — — 1999-02 Master Installation Kit MOTR12CRMK — — Master Installation Kit
Note: 3.90 and lower numerically for three series carrier, 4.10 and higher numerically for four series
carrier.

DOT 5.1 Brake Fluid RBF 600 Racing Brake Fluid

100% synthetic brake fluid on polyglycol A DOT 4, 100% synthetic, non-silicone racing
basis for all types of hydraulic actuated brake fluid that is engineered to endure the
brake and clutch systems in accordance with high temperatures common to racing brake
DOT 5.1, DOT 4, and DOT 3 manufacturers' and clutch systems. RBF 600 has a dry boiling
recommendations. Specially designed for point of 593°F, superior to DOT 5 silicone-
anti-lock brake system (ABS). Dry boiling based fluids. Viscosity is lower than DOT 3 and
point of 522°F (272°C). Sold in a 16.9-oz. DOT 4 fluids, allowing easier fluid circulation
bottle, or in cases. in micro-valves and anti-lock systems. Sold in
Case of (12) 16.9-oz. bottles, or in cases.
16.9-oz. Bottle 16.9-oz.Bottles
Case of (12)
MTL100951 MTL100951-12 16.9-oz. Bottle 16.9-oz. Bottles
MTL100949 MTL100949-12
Note: Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).

342 2023 - 2024 HOT ROD AND EARLY MUSCLE

RBF 660 Racing Brake Fluid 90 PA Limited-Slip
RBF 660 resists the extreme temperatures Differential Lubricant
common to carbon and ceramic race Specially formulated for use in all
car brakes, minimizing reliance on air hypoid differentials, with or without
for brake cooling. 100% synthetic, non- limited-slip, 90 PA decreases friction
silicone DOT 4 fluid has a 617°F dry boiling and wear, and resists extreme
point. Greatly exceeds DOT 3, DOT 4, pressure, wear, corrosion, and
and DOT 5.1 standards. May also be used foaming. Meets API GL4 and GL5
with conventional steel rotors and clutch standards.
systems. Sold in 16.9-oz. bottle, or in cases.
Case of (12)
Case of (12) 2-Liter Bottle 2-Liter Bottles
16.9-oz. Bottle 16.9-oz. Bottles MTL100122 MTL100122-12
MTL101667 MTL101667-12
Note: Do not mix with silicone (DOT 5 silicone base), mineral (LHM) or polyglycol based brake
fluids. Classic Performance 20W50
This specially formulated 20W50
high-performance oil is suitable
for classic cars with 2001 and older
Break-In Oil 10W-40 engines, and includes a higher level of
Specially formulated performance ZDDP for extra wear protection. Sold
break-in oil incorporates balanced in two-liter cans, and in cases.
friction modifiers and increased Case of (10)
levels of ZZDP (Zinc-Phosphorous) to 2-liter Can 2-liter Cans
MTL110621 MTL110621-10
reinforce engine protection. Polymers
resistant to high heat and shear help
maintain optimum lubricating film and
ring seal. Sold in one-quart bottles, or in 4100 Power Engine Oils
cases. Not API certified. High-performance synthetic blend
Case of (12)
lubricant, engineered for both
1-qt.Bottle 1-qt. Bottles gasoline or diesel engines, is well
MTL108080 MTL108080-12 suited for use in modern, high-
performance applications with fuel
Multi ATF Transmission Fluid injection and catalytic converters.
Synthetic-based fluid is formulated 4100 Power incorporates the highest
with anti-wear, anti-corrosion and film strength and extreme-pressure
anti-foaming properties for use in a package currently available, and the
variety of automatic transmissions. synthetic stock is designed to handle
It reduces friction for longer gear life extreme running temperatures,
and may also be used in power steering resulting in less volatility and reduced
and other hydraulic systems. Meets GM consumption. Not API-certified.
Dexron II/III and Ford Mercon/Mercon V 1-Liter Case of (12)
specifications. Sold in one-liter bottles, Description Bottle 1-Liter Bottles
15W50 MTL102773 MTL102773-12
or in cases.
Case of (12)
1-Liter Bottle 1-Liter Bottles
MTL105784 MTL105784-12

8100 Eco-Nergy Oils

A 100% synthetic, ester-based
oil that delivers maximum fuel
economy to modern turbo diesel
direct injection and gasoline engines.
Fully compatible with leaded or
unleaded gasoline, diesel fuels and
LPG. Not API-certified.
1-Liter Case of (12) 5-Liter Case of (4)
Description Bottle 1-Liter Bottles Jug 5-Liter Jugs
5W30 MTL102782 MTL102782-12 MTL102898 MTL102898-4

2023 - 2024 HOT ROD AND EARLY MUSCLE 343

8100 Eco-Lite 0W20 Oil 8100 X-Max 0W40 Oil
“Fuel Economy” lubricant with low Specially designed for the latest and
viscosity for the latest generation of high-powered models equipped with
gasoline engines. Recommended for turbocharged or naturally aspirated
many Honda, Mazda, and Subaru SOHC engines. Suitable for turbo diesel direct
engines. injection or gasoline engines.
1-Liter Case of (12) Case of (4) 5-Liter Case of (4)
Description Bottle 1-Liter Bottles 5-Liter Jug 5-Liter Jugs Bottle 5-Liter Jugs
0W20 MTL108534 MTL108534-12 — — MTL104533 MTL104533-4
5W30 MTL108212 MTL108212-12 MTL108214 MTL108214-4
8100 X-Power
Full-Synthetic Oil 10W60
8100 X-Power full-synthetic oil is a
8100 X-Cess 5W40 Oil 10W60 lubricant specially designed
8100 X-Cess is a 100% synthetic oil for high-performance cars with
engineered for powerful, late model naturally aspirated, compressed, or
cars using gasoline or direct-injection turbocharged gasoline engine.
turbo diesel engines, and catalytic
Case of (4)
converter equipped cars. Advanced 5-Liter Jug 5-Liter Jugs
lubricant provides exceptional wear and MTL106144 MTL106144-4
high temperature protection. Not API-
certified.
1-Liter Case of (12) Case of (4) Classic Nineties Oil
Bottle 1-Liter Bottles 5-Liter Jug 5-Liter Jugs
Premium semi-synthetic multi-
MTL109774 MTL109774-12 MTL109776 MTL109776-4
grade engine oil specially engineered
for vehicles built in the late 1980s and
1990s.
Classic Oil Part No. Description
A modern version of classic single- 10w30
weight engine oil engineered for MTL110620 2-Liter Can
vintage engines and select gearboxes. MTL110620-10 Case of (10) 2-Liter Cans
Formulated with a high ZDDP content to
provide superior anti-wear protection of
critical components including high-lift
flat-tappet camshafts. Classic Performance Oil
Part No. Description
Premium mineral multi-grade engine
SAE 30 oil, specially designed for classic
MTL104509 2-Liter Can vehicles built between the 1950s and
SAE 50 1970s.
MTL104510 2-Liter Can Part No. Description
20w50
MTL110621 2-Liter
2100 Classic Oil MTL110621-10 Case of (10) 2-Liter Cans
An updated version of the first semi-
synthetic oil formulated with a modern
technology detergent level.
Part No. Description
15W50
MTL104512 2-Liter Can
MTL104512-10 Case of (10) 2-Liter Cans

Classic Eighties Oil Vehicle System Additives

Premium semi-synthetic multi-grade engine oil specially Specially designed additives for targeted
engineered for vehicles built in the vehicle systems dissolve existing deposits and
1980s. help prevent new deposits from forming when
used regularly. Compatible with all types of
Part No. Description
10w40 gasoline and diesel engines.
MTL110619 2-Liter Can Part No. Description
MTL110619-10 Case of (10) 2-Liter Cans MTL109541 Engine Clean, 10-oz. Bottle
MTL109544 Radiator Clean, 10-oz. Bottle
MTL109545 Automatic Transmission Clean, 10-oz. Bottle
MTL109615 Throttle Body Clean, 16.9-oz. Aerosol Can

344 2023 - 2024 HOT ROD AND EARLY MUSCLE

Valve Cover Hold-Down Bolts Valve Cover Grommets
T-Bar Style and Plugs
Chromed-plated steel wing bolts have Grommets and plugs are for use with chrome breathers.
an extra-long stud to accommodate extra thick valve Neoprene material will remain soft and pliable to ensure
cover gaskets or hold-down clamps. Bolts are available in positive oil seal. Made to fit most stamped or die cast
two lengths for short or tall valve covers, 4-pack. valve covers, 2-pack.
Part No. Description Part No. Description
MRG9818 T-Bar Wing Bolts, 3-1/2" Long, 1/4"-20 Thread, 4-Pack MRG6375 Valve Cover Plugs, 1-1/4" OD
MRG9820 T-Bar Wing Bolts, 5" Long, 1/4"-20 Thread, 4-Pack MRG6376 One Valve Cover Grommet, One PCV Grommet
MRG6377 PCV Grommets, 1-1/4" OD x 3/4" ID
Late Model Small Block Chevy
Hold-Down Bolts Baffled Breather Grommets
MRG9822 MRG5425
Give 1987 and later Chevy 305-350 Grommets are made to fit most
engines the finishing touch with valve covers with 1-1/4" O.D. x 1" I.D.
these valve cover hold-down bolts. grommets. Grommets extend 1-1/4" into
Bolts are chrome plated with button the valve covers and will not clear stud girdles, 2-pack.
head and measure 1/4"-20 x 3-3/8" (four per kit).
Master Cylinder Covers
Valve Cover Clamps Steel covers include chrome-plated bail wires
These long competition-style clamps (no gasket).
are ideal for use on valve covers using
only four hold-down bolts. The smaller
style clamps are for use on covers using
more than four hold-down bolts. Both
styles will accommodate up to a 5/16"
MRG5271 MRG5272 MRG5274
hold-down bolt.
Reservoir Description Cover
Part No. Description Part No. Application Nominal Size Retainer Material
MRG9817 Competition, Long Style, 4-Pack MRG5271 GM 3" x 5-5/8" Single Bail Steel
MRG9899 Custom, Short Style, 8-Pack MRG5272 GM 3" x 5-3/4" Dual Bail Steel
MRG5273 GM - Corvette 3" x 5-3/4" Dual Bail Steel
Twist-On Style MRG5274 Ford 2-3/4" x 5-3/4" Single Bail Steel
Valve Cover Breathers
Each chrome-plated, twist-on Chrome Plated Water Necks
breather/oil filler cap houses a O-Ring Style MRG2667
high-porosity filter and an internal
MRG2660
baffle.
Part No. Description
MRG2061 2-3/8" Diameter x 1-3/4" Tall, No Logo
MRG2069 2-3/4" Diameter x 2-1/8" Tall with Mr. Gasket Logo Chromed die-cast water necks have O-ring style seals
prevent water leaks. Machined for a great fit, water necks
Oil Filler Cap Plug are first polished to a high luster, then chrome plated for
lasting beauty. O-ring and mounting bolts are included.
MRG9815
Plug fits all GM or aftermarket valve covers Part No. Description
MRG2660 Chevy V8, Early
with 1-1/4" hole. MRG2661 Chevy V8, Late
MRG2662 Ford 289-302-351W
Twist-On Oil Filler Cap MRG2663 Ford 351C-Straight Neck
MRG2667 Pontiac V8, 1964 to 1981
MRG2062 Replacement O-Rings for MRG2660, MRG2661, MRG2663,
Cap fits most popular valve covers. MRG2668
and MRG2667

Chrome Plated Push-On Quick-Change Cam Cover Kit

Breather MRG1099
MRG2068 Mr. Gasket's own quick-change
Internally baffled, with a high-porosity cam kits eliminate removing the
filter, the breather fits factory and oil pan during replacement of
aftermarket valve covers with 1-1/4" hole. the timing chain and gears. Fits
Breather measures 2-1/2" x 2-1/8" and has all 200-229 V6 and 283-400 V8
logo. Chevys.

2023 - 2024 HOT ROD AND EARLY MUSCLE 345

Chrome-Plated Timing Covers Chrome-Plated Fuel Pump
and Timing Tabs Mounting Plate
Dress up the front of the engine MRG1514
with one of Mr. Gasket's timing Chrome plated mounting plate fits 265-400 cubic inch
covers. Kits include gaskets, small block Chevy, is ideal for mounting a stock OEM
seals, and bolts. Timing tabs are pump, and includes gasket.
available separately. MRG4590
Part No. Description
MRG4590* Timing Cover Kit, Small Block Chevrolet
Chrome-Plated Fuel Pump
MRG4591* Timing Cover Kit, Big Block Chevrolet Block-Off Plates
Timing Tab, Small Block Chevrolet 7" Balancer Block-off plates are precision cut to
MRG4592
for 1978 and Newer
cover stock fuel pump openings, gasket included.
MRG4593 Timing Tab, Small Block Chevrolet 8" Balancer
MRG4594 Timing Tab, Big Block Chevrolet 8" Balancer Part No. Description
MRG1515 Chevrolet 265-400
* For use with OEM style timing chain only. Double roller-type chains
or gear drives require checking for adequate clearance. Chevrolet 396-427-454 and Most V6 and V8
MRG1516
with 1-3/4" Bolt Spacing
MRG1517 Ford 351C, 351M-400
Chrome-Plated Timing Tabs
with Adjustable Pointer
Ideal for setting correct top dead Chrome-Plated
center, pointer is red anodized and can
be easily adjusted with a screwdriver.
Chevy Alternator Brackets
MRG4598 Similar to stock Chevrolet units,
Part No. Description
brackets are made from heavy-
MRG4597 Small Block Chevrolet 7" Balancer
MRG4598 Small Block Chevrolet 8" Balancer
gauge steel, polished to a high
MRG4599 Big Block Chevrolet 8" Balancer luster, then chrome plated for
lasting beauty.
Precision Timing Tape Part No. Description
MRG5170 Small Block Chevrolet OEM Style, LWP, 1976-84
Avoid the expense of indexing the harmonic
MRG5171 Small Block Chevrolet OEM Style, LWP, 1969-75
balancer. Tapes are used in timing high-
performance engines for increased efficiency and for
setting valve lash.
Wheel Dust Shields
Part No. Description
Wheel dust shields conceal rusty brake
MRG1588 Chevy, 6-3/4" For 283-400
MRG1589 Chevy, 7" For 1965-69 396-427, 1970 400 Small Block
components and stop unsightly brake
Chevy, 8" for 1970-73 396-427-454, dust from staining aluminum wheels.
MRG1591 Shields are ideal for use on most domestic
1965-68 327 High Performance, 1970-73 350
MRG1594 Ford, 6-3/8" 289-302-351 and import cars with alloy or custom wheels,
MRG1593 Mopar, 7-1/4" All 383 through 440 two per set. Will not fit most front-wheel-drive
applications.
Chrome-Plated Oil Dipstick/Tubes Part No. Wheel Wheel Lugs Bolt Circle Range Nominal O.D.
Size
MRG6235 MRG6905 15" 5 4-1/2" or 5" 13-3/16"
MRG6906 16" 5 4-1/2" or 5" 14-3/16"

Similar to stock dipsticks, hand tools are required

for installation. Disc Brake Wheel Spacers
Part No. Description Die-cast aluminum wheel spacers
MRG6235 Small Block Chevrolet (Block Mounted) for 1965-79 provide the necessary clearance for
MRG6237 Small Block Chevrolet (Passenger Side) for 1980-82 disc brake and mag/chrome wheel
MRG6236 Big Block Chevrolet (Pan Mounted) installations, two per kit.
MRG6923 Small Block Chrysler (273-360)
MRG6924 Big Block Chrysler (383-440) Part No. Description
MRG2370 7/32" Thick, Fits 4-1/2"-5" Bolt Pattern
MRG6920 Small Block Ford (260-302) for 1962-78
MRG2371 5/16" Thick, Fits 4-1/2"-5" Bolt Pattern
MRG6921 Ford 351 Windsor
MRG2372 7/16" Thick, Fits 4-1/2"-5" Bolt Pattern
MRG6925 Oldsmobile 350-455

GM TH350 Dispstick with Tube Magnetic Oil Drain Plug

Preventing engine damage, the
MRG9764 magnetic drain plug attracts and holds metal
Chrome-plated particles that may be in the oil. 1/2"-20 plug fits
dipstick and all Chevy, Chrysler 1962-83; Ford 1957-83; all Pontiac V8;
tube includes Olds 1966-83; and Buick 1959-83.
O-ring seal. Part No. Description
27" long. MRG15 Magnetic Oil Drain Plug
MRG16 Replacement Nylon Drain Plug Washers, Pack of 5.

346 2023 - 2024 HOT ROD AND EARLY MUSCLE

High-Performance Aluminum Carb Spacer Kits
Electric Cooling Fans Kits fit the standard Holley/Carter
Mr. Gasket fans provide more bolt pattern. The one-inch open-
efficient cooling at low speeds, center spacer MRG6005 has a 1/4"
where it is needed most. Fans also knockout hole if an additional
free up more usable horsepower vacuum port is required.
to the rear wheels, and increase Part No. Description
fuel economy. The motor rides on MRG6005 1" Open Center
MRG6005
dual ball bearings, not on bushings like some others. MRG6006 1" 4-Hole Center
MRG6007 2" Open Center
Reversible fan blades are engineered to provide
maximum air flow.
Part No. Size CFM RPM Amp Draw
MRG1987 14" 1800 2100 10.3 Throttle Cable Bracket Kit
MRG6039
Electric Depth (D) Height (H) Width (W) Chrome-plated throttle cable
Fan
Overall Fan Assembly Dimensions
bracket will make carburetor swaps
14" 3.40" 14.69" 14.00"
a breeze and add the finishing touch
16" 3.40" 16.56" 16.00" to any engine compartment. Kit
includes a secondary bracket for
Replacement Fan automatic transmission kickdown
cable.
Mounting Kit
MRG1994 Universal Dual Throttle Return
The same mounting kit included with all Mr. Gasket fans. Spring Kit
Kit fits most electric fans.
MRG19
Thermocap Temperature The dual throttle return spring and
bracket kit is engineered for positive
Reading Thermostat throttle return to assure safety.
MRG2470S
This cap can be the difference Chrome Plated Fuel Lines with Fuel
between safely opening a radiator Pressure Gauge
cap and serious injury from steam
The fuel lines incorporate a compact,
burns. Domestic Radiators, 13 PSI
convenient 1-1/2" fuel pressure
gauge that reads out in 1/2 pound
High-Performance Thermostats increments with a range of 0-15
High-performance thermostats resist large variations PSI. Inverted flare female inlet
in coolant pressures. At high RPM, coolant temperature thread size is 5/8"-18.
and coolant pressure fight for control of the thermostat, Part No. Description
often keeping it from opening at the designated MRG1558 Fits Holley with 8-21/32" Centers
temperature. Thermostats listed are for 1995 and MRG1559 Fits Holley with 9-5/16" Centers
earlier models only.
Part No. Description Fuel Pressure Gauge
GM/Ford/AMC
MRG4363 160°F
MRG1561
MRG4364 180°F Compact 1-1/2" gauge will fit almost
MRG4365 195°F anywhere. Reads out in 1/2 pound
Chrysler/Dodge/Plymouth increments with a range of 0-15 PSI.
MRG4366 160°F Gauge has a 1/8"NPT male fitting.
MRG4367 180°F

Chrome Gas Line Kits

Carburetor Adapter Kits Kits include copper tubing,
Adapters are made of die-cast brass fittings, and silver-brazed
aluminum and include gaskets, studs, connections, all chrome-plated.
nuts, and washers. Installation is
Note: For a positive seal use PTFE tape.
quick and easy
. Part No. Description
MRG1551 Dual-Inlet Holley, 3/8" Tube, 8-21/32" Centers
Part No. Description MRG1552 Dual-Inlet Holley, 3/8" Tube, 9-5/16" Centers
Adapts Holley 350/500 2bbl carburetor
MRG1929
to Quadrajet bolt pattern, 1-1/8" tall
Any 4bbl. Carb. to any 4bbl manifold except Holley 4500 and OEM
MRG1932
manifolds with exposed exhaust crossover tube, 3/4" tall
Fits any 4-bolt, 4bbl to any small 4-bolt, 2bbl manifold and/or
MRG1933 4-bolt, 2bbl to any 4-bolt, 4bbl manifold
(except spread bore applications), 1" tall

2023 - 2024 HOT ROD AND EARLY MUSCLE 347

Fuel Pressure Gauge with Competition Wire Loom Kit
In-Line Adapter MRG6015
MRG1560 The looms are compatible
Ideal for in-line hook-up of fuel with tall valve covers and will
pressure almost anywhere, gauge accommodate 7mm and 8mm
has a 3/8" inlet and outlet. Unit ignition wires. Kit includes two
includes in-line adapter and 1-1/2" 3-hole dividers, four 2-hole
gauge that reads out in 1/2 pound dividers, and four chrome
increments with a range of 0-15 PSI. brackets.

Fuel Pressure Regulator Wire Markers

MRG9710 MRG4472
Dial-type regulator adjusts from 1 to 6 Eliminate firing order confusion with
PSI and fits 5/16" and 3/8" I.D. fuel line. Mr. Gasket's wire markers. Easy-to-
Included are fittings, hose and clamps. read markers are oil- and grease-
Not for fuel-injected systems. resistant and fit wires up to 8mm. Set of eight.

Clearview Fuel Filter Kits Advance Curve Kits

The kits allow full advance
Part No. Description
Universal,
between 2,000 and 2,800 RPM.
MRG9706 Fits 1/4", 5/16" and 3/8" I.D. Hose, Get maximum power and engine
Does Not Include Hose or Clamps acceleration.
Fits 5/16" I.D. Hose, Part No. Description
MRG9747 Includes 4 Chrome-Plated Clamps Mopar Kit with 1 Set of Springs Only,
and 2 Short Lengths of Hose MRG9706 MRG925B
1959 and Later, 6 and 8 Cylinders
Ford Kit with 1 Set of Springs Only,
MRG925D
Chrome Fuel Filter 1965 and Up, Most Applications

MRG9746 Chevy Chrome-Plated

Filter fits 3/8" I.D. hose. Openings
on each end have safety beads for Distributor Clamp
positive fuel line retention. Not for MRG6197
fuel injection systems. Rolled edges add extra strength
to clamp which is ideal for use on
Coil Covers and magnetos as well as point-type or
electronic distributors. For small and
Mount Bracket MRG9767 big block Chevy V8s and 200/229 V6s.
Universal chrome-plated steel
coil covers accept most stock
coils and include chrome-plated Ford Chrome-Plated
mounting brackets. Distributor Clamp
Part No. Description MRG2502
MRG9767 Universal GM-Style Vertical Mount with Bolt and Nut
MRG9777 Universal Coil Cover Horizontal Mount
Add a touch of sparkle and hold the
distributor timing where it's set.
Competition clamp with stud and
nut fits Ford 260-351W.
Custom Wire Loom Kit
MRG6016
The kit will Trunk-Mounted Battery
accommodate 7mm
and 8mm ignition wire Installation Kit
and includes two 4-hole MRG6279
wire separators, eight Kit includes a polyethylene
2-hole wire dividers, plastic battery case, battery
and four chrome-plated hold-down and brackets, 20
steel brackets. feet of 4-gauge stranded
copper battery cable, 4 lugs, a
pair of cable ends, and related
hardware. Case measures 12"
x 6-3/4" x 10" high.

348 2023 - 2024 HOT ROD AND EARLY MUSCLE

Chevy Starter Motor Heat Shield Twelve Point Intake Manifold Bolts
MRG3678 Grade 8 bolts with twelve-point, smaller-
Heat shield is designed with heat- than-standard heads and flanges, include
resistant material sandwiched extra-thick flat washers for optimum
between two aluminum plates. Shield clamping pressures. Bolts are ideal for
protects the starter from exhaust use where space is at a minimum, as with
system heat buildup, especially larger runner race manifolds. Bolts and
important when using headers. Shield washers are zinc plated for protection
fits all Chevy V8s and 90° V6s. and appearance.
Part No. Description
Small Block Chevy 265-400, 90° V6 Engines
Ring Gear Spacer Kit MRG6091
3/8"-16 x 1", 12 Bolts and Washers
MRG902A MRG6091
Chrysler 273-440 Wedge, A, B, and RB Engines,
3/8"-16 x 1", 12 Bolts and Washers
Stamped ring gear spacers are AMC 290-343-360-390-401 Engines,
Blanchard ground to ensure parallel MRG6091
3/8"-16 x 1", 12 Bolts and Washers
surfaces for perfect alignment. Kits
include spacer and bolts. Carburetor Studs
Application Spacer Bolt Hole Bright zinc-plated studs help prevent
Thickness Diameter
12-Bolt Chevrolet, 1965-75;
stripped out threads in aluminum intake
.305" To .315" .437" manifolds. The studs are threaded
12-Bolt Chevelle, Camaro, Firebird
5/16"-18 at one end and 5/16"-24 at the
Shifter Boot opposite end. Each package contains
four each of studs, nuts, and washers.
MRG1651 Part No. Description
Small 5-1/2" boot is a replacement MRG59 Standard, 1-3/8" Length
for the Eliminator 3-speed shifter MRG60 Medium, 1-1/2" Length
boot. Trim plate and mounting MRG61 Long, 2" Length
screws are included. MRG62 Extra Long, 2-1/2" Length

Hex-Head Header Bolts

Heat-treated for extra strength, bolts are grade 5 with a Oil Pan and
7/16" hex-head and a protective black finish. Timing Cover Bolts
Part No. Description Bolts are zinc plated, grade 5.
MRG915 3/8"-16 x 3/4", Set of 12 Part No. Description
MRG917 3/8"-16 x 1", Set of 12 Oil Pan Bolt Kits
MRG919G 3/8"-16 x 3/4", Set of 16 Small Block Chevy and 90° V6 Engines and Olds V8,
MRG6085
1/4"-20 x 1/2" (14 Pieces), 5/16"-18 x 3/4" (4 Pieces)
Big Block Chevy and Pontiac V8,
MRG6086
Hex-Head Intake Manifold Bolt Kits 1/4"-20 x 1/2" (2 Pieces), 5/16"-18 x 3/4" (20 Pieces)
Ford 289-302-351 C/W and AMC 290-343-360-390-401,
Grade 5 hex-head intake bolts MRG6087
5/16"-18 x 3/4" (6 Pieces), 1/4"-20 x 1/2" (18 Pieces)
are zinc plated for protection and Timing Cover Bolts
appearance. Kits include hardened MRG6090 Small and Big Block Chevy, 1/4"-20 x 1/2" (10 Pieces)
flat washers for uniform torque
and to prevent galling on aluminum
intake manifolds. Torque Converter
Part No. Description
Small Block Chevy 265-400, 12 Bolts and Washers,
to Flexplate Bolts
MRG955G
3/8"-16 x 1" Hex Head Grade 8 fasteners are a must for all high-
Big Block Chevy 396-454, 16 Bolts and Washers, performance applications. Sets include lock
MRG954G
3/8"-16 x 1-1/4" Hex Head washers.
Chrysler 273-440 Wedge, A, B, and RB Engines, Qty. Per
MRG955G Part No. Application Size
12 Bolts and Washers, 3/8"-16 x 1" Hex Head Set
Ford 260-289-302-351W., 12 Bolts MRG6715 GM TH400 3/8"-16 x 1/2" 3
MRG958G
with Semi-Captured Washers, 5/16"-18 x 2" Hex Head GM TH350/Powerglide
AMC 290-343-360-390-401, 12 Bolts and Washers, MRG6716 3/8"-24 x 5/8" 3
MRG955G (Nuts Included)
3/8"-16 x 1" Hex Head Ford (with Flanged Lock
MRG6717 3/8"-24 4
Nuts Only)
MRG6718 Chrysler (except Hemi) 5/16"-24 x 7/16" 4

2023 - 2024 HOT ROD AND EARLY MUSCLE 349

Hilborn Style Air Scoops Air Cleaner “Spin Nuts"
High-quality, polished aluminum
castings are available to fit single
and dual carbs with 5-1/8" diameter
necks. The dual carburetor scoop has
an adjustable base to fit carburetors with MRG9862 MRG9863 MRG9868
7-5/8" to 9-1/4" center line spacing.
Part No. Description Length Width Height
The perfect touch for any air cleaner assembly, spin nuts
MRG5232 Single Four Barrel 13-5/8" 9-3/4" 5-9/16" fit all 1/4"-20 and 5/16"-18 studs.
Replacement Part No. Description
MRG1485 — — —
Air Filter Element MRG9862 Small Spin Nut
MRG9863 Large Spin Nut
Easy-Flow Air Cleaners MRG9868 Tri-Bar Spin Nut
Air cleaners fit 2 and 4-barrel
carburetors with 5-1/8" diameter Hood and Deck Pinning Kits
neck and include PCV attachment Secure hoods and give the
assembly. car a competition look. Kit
Part No. Description permits quick removal of
MRG1480 14", 2-1/4" High Filter MRG1480 hood or deck. Includes two
MRG1487 9", 2-3/4" High Filter chromed safety pins, scuff
plates, and hardware. Overall
Competition Air Cleaner pin length is four inches with
2-1/2" of threads.
MRG9790 Part No. Description
14" diameter x 3" tall, chrome- plated MRG1016 7/16"-20 Thread, Safety Pins with Screw-On Scuff Plates
steel air cleaner fits 2, 3 and 4-barrel MRG1017 7/16"-20 Thread, Torsion Pins with Screw-On Scuff Plates
carburetors with 5-1/8" diameter
neck.

Chrome-Plated
Valve Covers
Chrome-plated steel valve covers
have a flat, smooth top.
Part No. Description
Chevrolet 1987 and Up Small Block, Center Hold Down,
MRG9415*
Car Application
MRG9800* Chevrolet Small Block, OEM Height
MRG9801 Chevrolet Small Block, Tall
* Covers are baffled.

Ready-to-Run Pro-Billet Ready-To-Run Pro-Billet

Ford Distributors Chrysler Distributors
Ready-to-run distributors are perfect Ready-to-run distributors are the
replacements for bulky or breaker point perfect upgrade from breaker points
electronic distributors. Connect with or weak electronic ignitions. No
three wires. Built-in module. No ignition ignition control required.
control required. Part No. Description
Part No. Description MSD8388 273, 318, 340, 360
MSD8352 289, 302 MSD8391 Early Hemi 331, 354
MSD8354 351W MSD8386 383, 400
MSD8350 351C-460 MSD8389 Early Hemi 392
MSD8595 Ford “FE” MSD8387 426, 440
Replacement Parts Replacement Parts
MSD8431 Cap MSD8431 Cap, MSD8386, MSD8387
MSD8467 Rotor MSD8410 Cap, MSD8388
MSD85812 Gear For 351C-460 MSD8467 Rotor
MSD85832 Gear For 289-302 MSD8433 Cap, MSD8391, MSD8389
MSD85852 Gear For 351W MSD8467 Rotor, MSD8391, MSD8389

350 2023 - 2024 HOT ROD AND EARLY MUSCLE

Pro-Billet Distributors Billet Distributor Replacement Parts
Machined aluminum housing has an upper
sealed ball bearing that eliminates shaft
wobble. Features include Rynite distributor
cap, adjustable mechanical advance,
hardened 10,000 RPM plus shaft, extra
advance springs, advance bushings, and
high-output magnetic pickup for years of MSD8481 MSD8467 MSD8531
reliable service. MSD ignition control is Distributor Cap Rotor Gear
required. Part No.
MSD8381 MSD8481 MSD8481 is a cap and rotor set —
Ignition
Part No. Application Advance MSD83811 MSD84811 MSD84811 is a cap and rotor set —
System
Mechanical/ MSD8360 MSD8433 MSD8467 MSD8531
MSD8519 American Motors 290-401 MSD MSD8365 MSD84111 MSD84101 MSD8531
Vacuum
MSD8381 GM 1992-94 LT-1 (Early) Adjustable OEM MSD8366 MSD8406 MSD8406 is a cap and rotor set MSD8531
MSD83811 GM 1994-96 LT-1 (Late) Adjustable OEM MSD8361 MSD8433 MSD8467 MSD8531
Mechanical/ MSD8393 MSD8433 MSD8467 MSD8531
MSD8360 Chevrolet Ready-to-Run OEM/MSD
Vacuum MSD85551 MSD8433 MSD8467 MSD8531
Mechanical/ MSD85561 MSD8433 MSD8467 MSD8531
MSD8365 Chevrolet HEI OEM/MSD
Vacuum MSD85501 MSD8433 MSD8467 MSD8472
Chevrolet 1987-95, MSD8570 MSD8431 MSD8467 MSD8531
MSD8366 Electronic OEM/MSD
Ready-to-Run
MSD8572 MSD8433 MSD8467 MSD8531
Mechanical/
MSD8361 Chevrolet 1987-93 EFI MSD MSD8456 MSD8408 MSD8070 MSD85834
Vacuum
MSD8455 MSD8408 MSD8070 MSD85834
MSD85551 Chevrolet Mechanical MSD
MSD8577 MSD8431 MSD8467 MSD85812
MSD85561 Chevrolet With Slip Collar Mechanical MSD
MSD85501 Chevrolet Locked Out MSD MSD8578 MSD8431 MSD8467 MSD85852
MSD8570 Chevrolet Small Dia. Mechanical MSD MSD8579 MSD8431 MSD8467 MSD85832
MSD8393 Chevy 348/409 Mechanical MSD MSD8477 MSD8431 MSD8467 MSD85812
MSD8572 Corvette 1963-74 Vacuum MSD MSD8478 MSD8431 MSD8467 MSD85852
MSD8456 Ford 1986-93 5.0L Electronic OEM/MSD MSD8479 MSD8431 MSD8467 MSD85832
MSD8455 Ford 1994-95 5.0L Electronic OEM/MSD MSD8580 MSD8408 MSD8423 MSD85812
MSD8577 Ford 351C-460 Small Dia. Mechanical MSD MSD8598 MSD8408 MSD8423 MSD85832
MSD8477 Ford 351C-460 Vacuum MSD MSD8582 MSD8408 MSD8423 MSD85832
MSD8478 Ford 351W Vacuum MSD MSD8584 MSD8408 MSD8423 MSD85852
MSD8578 Ford 351W Small Dia. Mechanical MSD MSD85805 MSD8408 MSD8423 MSD85852
MSD8579 Ford 302 Small Dia. Mechanical MSD MSD8594 MSD8433 MSD8467 MSD85812
MSD8580 Ford 351C, 351M-400, 429-460 Mechanical MSD MSD8534 MSD8431 MSD8467 —
MSD8582 Ford 289-302 Mechanical MSD MSD8545 MSD8431 MSD8467 —
MSD8479 Ford 289-302 Vacuum MSD MSD8546 MSD8431 MSD8467 —
MSD84791 Ford 289-302W/Steel Gear-Hydraulic Cams Mechanical MSD
Ford 289-302
MSD8598* Mechanical MSD
With Steel Gear For Hydraulic Roller Cams
MSD8584 Ford 351W Mechanical MSD
MSD85805 Ford 351W with Victor Jr. Intake Mechanical MSD
MSD8594 Ford “FE” 390-428 Mechanical MSD
MSD8534 SB Chrysler 273-360 Mechanical MSD
MSD8545 BB Chrysler, 383-400 Small Dia. Mechanical MSD
MSD8546 BB Chrysler 413-426-440 Small Dia. Mechanical MSD
MSD8517 BB Buick 400-455 Mechanical MSD
MSD8563 Pontiac 326-455 Mechanical MSD
MSD8566 Oldsmobile 260-455 Mechanical MSD
* Not legal for use or sale on pollution controlled vehicles.

2023 - 2024 HOT ROD AND EARLY MUSCLE 351

Black Pro-Billet™ Distributors Super HEI Kit
These black machined aluminum MSD85001
distributors feature a Rynite cap, The solution to power
adjustable mechanical advance, extra loss and lack of
springs, and high-output magnetic response on vehicles
pickup. Requires MSD ignition control fitted with GM HEI distributors, the kit bypasses the
box. low-powered HEI module and coil, replacing them with
Part No. Description a Digital 6AL ignition-control and Blaster 2 high-output
MSD83653 Chevy HEI, Mechanical Vacuum Advance coil, adding increased spark energy and performance.
Chevy 1987-93, EFI Mechanical Vacuum
MSD83613
Advance
Includes Digital 6AL ignition with Soft Touch Rev Control,
MSD85555 Chevy V8, Mechanical Advance
Blaster 2 coil, coil wire, and dust cover.
MSD85505 Chevy V8, Locked Out Advance
MSD85703
Chevy V8, Small Diameter Locked-Out HEI Vacuum Advance Stop Plate
Advance
MSD84563 Ford 1986-93 5.0L, Electronic Advance MSD84281
MSD85773
Ford 351C-460, Small Diameter, Designed for use on MSD Pro-Billet HEI
Mechanical Advance MSD8365 or Street Fire HEI MSD8362.
Ford 351W, Small Diameter, Mechanical Small plate limits vacuum advance.
MSD85783
Advance
Ford 302, Small Diameter, Mechanical
MSD85793
Advance HEI Advance Curve Kit
MSD85463
Chrysler 413-426-440, Small Diameter,
Mechanical Advance
MSD8428
Kit includes new advance weights,
Black Ready-to-Run springs and bushings. Fits stock
HEI distributors and will deliver
Pro-Billet™ Distributors solid ignition timing. Will not
Now available in black, these ready-to-run work with MSD8365 Pro-Billet HEI
distributors are the perfect upgrade from distributor.
breaker points and weak electronic ignitions.
Simple three-wire hook-up and no ignition
control box required.
Street Fire Economical Performance
Street Fire® delivers quality products at a budget price.
Part No. Description All of the Street Fire components meet MSD engineers'
Chevy V8 (except 348/409), with Built-In
MSD83603
Rev Limiter
specifications and will provide the top performance for
MSD83523 Ford 289, 302, with Built-In Rev Limiter the price. The quality of each part is backed with a one-
MSD83503 Ford 351C-460, with Built-In Rev Limiter year warranty!
MSD83873 Chrysler 426-440, with Built-In Rev Limiter
Street Fire GM HEI Distributor
Crate Ignition Kits MSD8362
MSD crate engine ignition kits are supplied with
The Street Fire distributor is all
everything
new, with coated weights and
including a ready-
welded (not pressed in) weight
to-run distributor,
pins in the advance assembly and
Blaster SS coil,
the same gear used in Pro-Billet
8.5mm spark
distributors. Vacuum advance
plug wires with
can be custom tailored to match
separators, and a
engine and driving needs.
billet hold-down
clamp. The ready- Part No. Description
Replacement Parts
to-run distributor
MSD5501 Cap and Rotor
with a high-output MSD5596 Module
module produces MSD5525 Coil
a vigorous, consistent spark. Installation is easy with
just three wires to connect. The Blaster SS coil is
compact, efficient, and easy to mount. The system is
Street Fire GM
complemented by red 8.5mm Super Conductor wires, EFI Distributor
supplied as a universal fit with straight/multi-angle MSD5591
boots and terminals on the spark plug side. Pro-Clamp Popular distributor found in
separators keep the wires neat and secure. GM trucks beginning in 1988
Part No. Description and carrying over to cars
MSD84741 Chevy Ready-to-Run for Limited Space Areas through the mid-1990s. Also
MSD84745 Ford 289, 302 many EFI systems require this
MSD84746 Ford 351W
distributor.
MSD84747 Ford 351C-460

352 2023 - 2024 HOT ROD AND EARLY MUSCLE

Street Fire GM Street Fire Spark Plug Wires MSD5554

Vortech Distributor Street Fire spark plug wires have a

low-resistance conductor wrapped
MSD5592 in a sleek and durable black sleeve.
Unique, flat cap distributor, as used by The terminals are covered in black
GM in the late 1990s, features a "correct- boots to protect the conductor
a-cap" with all even numbered spark plug from engine heat.
wires on the passenger side and odd
Part No. Description
numbered wires on the driver side. Chevy
MSD5554 Small Block 350 HEI
MSD5560 454, 1974-76 HEI
Street Fire MSD5561 366-454, Socket
MSD5563 1984-91, Corvette, 350TPI
Ford TFI Distributor MSD5564 Small Block, Socket Cap, Under Exhaust Manifold
MSD5594 MSD5565 Small Block, Socket Cap, Over Valve Covers
MSD5566 1975-82, Corvette 305-350 HEI
One of the most popular Ford
MSD5567 454, 1975-Up HEI
distributors. Commonly used on MSD5569 454, 1988-Up
1986-94 5.0L Mustangs and other MSD5570 1988-92 Chevy Caprice/Camaro
Ford vehicles. MSD5572 1997-Up GM F-Body, Corvette, LS-Series
MSD5575 1993-96 GM, LT1
Chrysler
Street Fire CDI Ignition MSD5530 318-360, 1973-On, Socket
MSD5531 383-440, 1973-On, Socket
MSD5520 Ford
A CDI ignition perfect for budget-minded enthusiasts. MSD5540 351W, 400, 460, 1977-On HEI
Ignition has capacitive-discharge technology MSD5541 302, 351W, HEI
which fires a series of multiple MSD5542 351C-460, Socket
sparks that last for 20° of MSD5543 289-302, Socket
MSD5544 1994-Up, Mustang, 5.0L
crankshaft rotation while
Universal Fit
under 3,000 RPM. This ensures MSD5550 8-Cylinder, Multi-Angle Plug, HEI Cap
combustion and produces great MSD5551 8-Cylinder, Multi-Angle, Socket/HEI
throttle response and smooth MSD5552 8-Cylinder, 90° Plug/90° Plug
idle. MSD5553 8-Cylinder, 90° Socket/HEI Cap

Multiple Spark Discharge

Street Fire Coils
Coils mount directly in place of the factory
coils and accept the factory connectors. Digital 6A and 6AL
Choose Ford TFI or GM dual connector type. Ignition Controls
Part No. Description MSD kept the same footprint
MSD5524 Canister Coil as the traditional 6AL but
MSD5525 Internal HEI Coil lowered the profile for a
MSD5526 GM Dual Connector Coil sleek look. The wiring is all
MSD5527 Ford TFI Coil routed out one end of the
MSD5528 1994-00 Ford 6 Tower Coil Pack
unit through a sealed and
MSD5529 2001-04 Ford 6 Tower Coil Pack
locking connector, easing
MSD5524 installation and keeping
the wiring neat and clean. The rev limiter was moved to
Street Fire Cap the top of the housing for easy access to the two rotary
and Rotor Kits dials that allow setting the limit in 100 rpm increments.
Cap and rotor kits offer quality at an Inside the Digital 6AL is a microprocessor that monitors
affordable price. and controls every firing and rev limit, and the ignition
Part No. Description produces more power while drawing less current! The
GM Points-Style V8 Distributor new Digital 6A and 6AL are supplied with the wiring
MSD5500
with Socket Cap harness and the components for installation. The 6AL is
MSD5501
MSD5501 GM HEI V8 with Internal Coil also supplied with vibration mounts. Both ignitions are
MSD5502 GM V8 EFI with External Coil compatible on 4-, 6-, or 8-cylinder engines with 12-volt,
MSD5504 Ford V8 Duraspark negative-ground electrical systems. Compatible with
MSD5505 Ford/MSD V8 TFI breaker points, amplifiers and magnetic pickups.
MSD5506 Ford V8 Socket Cap
Part No. Description
MSD6201 Digital 6A™ Ignition Control, Red
MSD62013 Digital 6A™ Ignition Control, Black
MSD6425 Digital 6AL™ Ignition Control, Red
MSD64253 Digital 6AL™ Ignition Control, Black

2023 - 2024 HOT ROD AND EARLY MUSCLE 353

Multiple Spark Discharge - Cont. Coil Wire Retainer
MSD8217
Digital 6AL-2 Retainer keeps the coil boot firmly connected to the coil
Ignition Controls tower on canister-style coils.
The next generation of 6-Series
ignition controls! This unit Blaster SS Ignition Coil
still has the 20° duration of MSD8207
multiple sparks, but with higher
A compact high-performance coil packed
output to ensure complete
with power. The Blaster SS produces
combustion. There is a two-
300 milliamps with a 40,000-volt maximum
step, built-in rev control, but
output. Unique winding reduces the chances of voltage
no RPM modules are needed.
breakdown between the primary and secondary
Adjustments are made in 100
windings. Brass terminals and a sturdy Rynite housing
RPM increments via four rotary
make up a rugged coil package that is compatible with
dials. Available in black or red.
stock or capacitive ignitions. Vibration mounts included.
Part No. Description
MSD6421 Red
MSD64213 Black Blaster HVC Coil
MSD8252
Digital-6 Plus The Blaster HVC provides maximum
Ignition Controls power to street/strip vehicles equipped
The Digital-6 Plus ignition with MSD 6 ignition units. Coil windings
control's advanced digital are efficient and voltage can be stepped up
ignition technology offers for higher output because of the Blaster's low primary
outstanding power and resistance. Vibration-proof mounts are included.
efficiency. A 15 Megahertz
micro-controller quickly
analyzes critical ignition
functions, outputs 135
millijoules and draws only
.7 amps per 1000 RPM. Ideal The all-new Atomic EFI system is easy to install (like
for street/strip or race only installing a carburetor) and program (it's self-learning).
vehicles, the Digital-6 Plus Enjoy enhanced performance with improved drivability
has two built-in rev limiters, from idle to full throttle blasts. Program without a laptop
a single retard stage and a start retard, both of which to select parameters to match the engine, control fuel
adjust with rotary switches rather than chips. Should be pump and electric fans, and adjust timing.
used with MSD8252 HVC coil. Available in black or red. Atomic EFI Master Kit
Part No. Description MSD2900
MSD6520 Red, Non-Programmable Box
MSD65303 Black, Programmable Box
The Master Kit
includes every
component for an EFI
conversion, including:
Atomic Throttle Body,
Atomic Power Module,
wide-band oxygen
Blaster Ignition Coils sensor, Atomic hand-
Blaster ignition coils are the best choice for held programmer/monitor, and fuel pump kit with a 525
dramatically improving the ignition system. All horsepower maximum fuel pump, filters, brackets, high-
coils include coil boot, terminal, and ballast pressure hose, and installation hardware.
resistor (when required).
Part No. Description Ignition Applications
MSD8203 Blaster 2 Red Coil MSD 6, 7 Or Stock Points
Atomic EFI Basic Kit
MSD8202 Blaster 2 Red Coil Late Model Electronic MSD2910
Blaster 3 Red Coil The Basic Kit is for
MSD8223 Late Model Electronic
With Tall Coil Tower
vehicles that already
MSD8222 Blaster High Vibration Coil MSD 6 or 7
MSD8226† Blaster GM Dual Connector Coil Late Model GM Electronic
use an electric fuel
Late Model Ford pump (with return
MSD8227† Blaster TFI Coil line), provides all the
Electronic
† Use MSD8876 for a direct plug-in installation. parts to convert to Atomic Power.
Kit includes: throttle body, power module, wide band
oxygen sensor, and handheld programmer/monitor.

354 2023 - 2024 HOT ROD AND EARLY MUSCLE

Atomic AirForce Ford Blaster
Intake Manifolds Coil-On-Plugs
Available for GM LS and LT1 engines, The new blaster coil-
Atomic AirForce intake manifolds on-plugs are bolt-in
were designed using Computational replacements for many
Fluid Dynamic Modeling to optimize plenum volume and SOHC modular motors. The
airflow paths for more power and responsiveness. The housing and installation are
two-piece design provides easy access to runners for the same as the factory.
porting, while the direct flow path runner design helps Sold in sets of eight.
maximize airflow. CARB-approved and 50-state legal. Part No. Description
MSD82428 1999-04, 4.6L SOHC Ford
Part No. Description
MSD82448 1999-04, 4.6L DOHC Ford
MSD2700 Manifold LT1
MSD82438 2005-07, SOHC Ford
MSD2701 Manifold LS7
MSD27004 Gray LT1 Intake Manifold
MSD27003 Black LT1 Intake Manifold
MSD27013 Black LS7 Intake Manifold Late Model Blaster Coils for Gen III Hemi
MSD2702 LS1/LS2/LS6Intake Manifold Fire up the late model Hemi with a set of MSD’s Blaster
MSD27014 Gray LS7 Intake Manifold Coil packs. The coils are a direct
MSD27023 Black LS1/LS2/LS6 Intake Manifold bolt-in and deliver more spark energy
than the factory models. Sold in
GM LS Engine Ignition Components
packages of eight.
One of the hottest engines around is undoubtedly GM's
Gen III, often referred to as the LS1, LS6, and LS7. Check Part No. Description
MSD82568 2003-05, Early Model
out these fine MSD components that will make the LS
MSD82558 2006-08, Late Model
Series engine even better.
Replacement Coils
LS Series Ignition Controller Improved materials and windings create a stronger spark
This new and improved LS ignition controller has all to burn the fuel mixture more efficiently for a smooth idle
the great benefits of the 6LS controller. Programmable and improved mid-range RPM power.
step retard, launch retard, and RPM rev limiters, plus
many new features. Designed to fit
most LS engines these new
features include six
pre-programmed timing
tables, high- speed data
acquisition, idle timing MSD8241 MSD8225
MSD8231
MSD8224
control, and individual
Part No. Description
cylinder timing. The rotary timing selector switch allows
Ford 4-Tower Coil
timing changes to be made on the fly. Compatible with all MSD8241 Ford Coil Pack, 4-Tower, 1995-98 4.6L, DOHC/SOHC
MSD, Accel, and GM LS coils, these new units are available GM DIS Coil
in either black or red. MSD8224 GM 2-Tower Coil Pack (Mid 1980s-Late 1990s)
Part No. Description INSTALLATION TIP!
MSD6014 LS Series Engine Controller, Red For installation of an MSD DIS Ignition, use Interface Module MSD8870.
MSD60143 LS Series Engine Controller, Black HEI GM
MSD8225 High Energy Unitized Coil For GM HEI Distributors
GM Single Connector
Ford Modular Engine Ignition Components MSD8231 GM Single Connector Coil, Used on 1996-99 Vehicles
INSTALLATION TIP!
6-Mod Ford Modular To install an MSD Ignition with this coil, use MSD8877 Harness for a direct plug-in
Ignition Controller installation.

MSD6011 Coil Interface Module

Retrofit a Ford 4.6L or 5.4L (SOHC/
DOHC) with a carbureted intake MSD8870
manifold and use this new controller Install the interface module
to handle the ignition chores. Unit between factory GM ignition
plugs into the coil packs and sensors module and MSD8224 coils.
of the engine for a direct installation. Color- coded wires connect to the
With a PC using Pro-Data+ software, the unit can be factory terminals and are made of
programmed for a custom timing curve, a step retard, Dupont Rynite, noted for its high
two-step rev limiter, and even adjust vacuum advance. dielectric strength.

2023 - 2024 HOT ROD AND EARLY MUSCLE 355

Soft Touch Rev Control Noise Filter
MSD8728 MSD8830MSD
Don't risk over-revving an Quiets radio noise caused by the power
expensive engine. MSD Soft cables of an MSD ignition system. The noise filter also
Touch Rev Control works with removes voltage surges that could interfere with the
standard points or inductive operation of other MSD accessories, such as the Two
ignition systems. Smooth rev-limiting Step.
action “holds” engine at selected RPM
without harsh backfires. Compatible with GM HEI, Ford, Mini-Stripper-Crimper
or Chrysler electronic, breaker point, or MSD 5 ignition
systems. Adjust rev limit with plug-in modules. Modules MSD3503
for 6,000, 7,000, and 8,000 RPM are included. The mini-stripper-crimper is used with a vise
and single-edge razor blade to strip heli-
core and super conductor wire. As the vise is
RPM Module Selectors tightened, even pressure is applied to the tool
Plug this selector into an MSD Soft to make good, tight crimps.
Touch Rev Control, or any other
accessory that uses a plug-in module,
and turn the knob to select from 12
RPM limits. Pro-Crimp Tool
Part No. Description MSD8673
MSD35051
MSD8670 3000-5200 RPM Module Selector The Pro-Crimp tool is a must for
MSD8671 4600-6800 RPM Module Selector any tool box. Interchangeable
MSD8672 6000-8200 RPM Module Selector jaws offer a variety of crimps.
MSD8673 7600-9800 RPM Module Selector Hardened steel frame has
molded hand grips.
Adjustable Low RPM Module
MSD8677
Plugs into MSD Soft Touch Rev Control, 2- or Cylinder Markers
3-step module selector, RPM-activated switch, or shift MSD3414
light for selection of any RPM between 1000 and 3000 Cylinder markers save time
at the turn of a knob. Ideal for cars with automatic and ensure that the plug
transmissions. wires are installed correctly.
Molded plastic markers are
RPM Module Kits available in 8.5mm wire sizes.
Each RPM module kit contains Set of 8.
five modules. Modules are
compatible with all MSD
accessories that require Wire Separators
modules. Kits are available in MSD's wire separators keep plug
even and odd increments. wires away from hot exhaust, and
Part No. Description from each other to prevent inductive
Even Increments crossfire.
MSD8743 3000, 3200, 3400, 3600, 3800
Part No. Description
MSD8744 4000, 4200, 4400, 4600, 4800
MSD8841 Dual Plug Wire Separators, 8mm
MSD8745 5000, 5200, 5400, 5600, 5800
MSD8842 Dual Plug Wire Separators, 8.5mm
MSD8746 6000, 6200, 6400, 6600, 6800
MSD8747 7000, 7200, 7400, 7600, 7800
MSD8748 8000, 8200, 8400, 8600, 8800 Weathertight Sealed Connectors
MSD8749 9000, 9200, 9400, 9600, 9800
Weatherproof
MSD8750 10,000, 10,200, 10,400, 10,600, 10,800
Odd Increments
nylon connectors
MSD87431 3100, 3300, 3500, 3700, 3900 are indexed
MSD87441 4100, 4300, 4500, 4700, 4900 to prevent
MSD87451 5100, 5300, 5500, 5700, 5900 mismatching and
MSD87461 6100, 6300, 6500, 6700, 6900 can withstand
MSD87471 7100, 7300, 7500, 7700, 7900 temperatures from -40°F to +257°F. Each terminal has
MSD87481 8100, 8300, 8500, 8700, 8900 its own tower, protected by self-lubricating seals to
MSD87491 9100, 9300, 9500, 9700, 9900 eliminate shorting. Positive locks emit an audible CLICK
when they are securely connected. Five sizes, each with
Shift Light male tower, female shroud, pins, and seals are available.
MSD8952 Part No. Description
The MSD Shift Light will light up at MSD8170 6-Pin Connector
whatever RPM is specified by the RPM MSD8171 4-Pin Connector
MSD8172 3-Pin Connector
module installed. Uses any RPM module.
MSD8173 2-Pin Connector
MSD8174 1-Pin Connector

356 2023 - 2024 HOT ROD AND EARLY MUSCLE

Pin Extraction Tool Universal Super Conductor
MSD8193 8.5mm Spark Plug Wire Sets
When terminals must be removed from a Weathertight Sets are for V8 engines and have factory installed spark
connector, the extraction tool can do the job without plug boots and terminals. Distributor end boots and
destroying the connector. terminals are supplied, but not crimped on. Wires are
extra long to fit most applications. Mini-stripper crimper
Timing Light is included to ease installation.

MSD8992 Black Super Conductor Wire Set MSD31223

Uses solid state circuitry Red Super Conductor Wire Set MSD31229
and a SCR (Silicon For late model HEI spark
Controlled Rectifier) to plug-top distributor caps
provide accurate and (Ford Duraspark or MSD Cap-
stable timing signals A-Dapt). 90° spark plug boots installed. 90° distributor
from 0-8000 RPM. A boots and terminals included.
linear Xenon flash tube and
focused Fresnel lens supply Black Super Conductor Wire Set MSD31193
a light that is intense enough for daytime use. Chrome- Red Super Conductor Wire Set MSD31199
plated metal housing with rubber nose cone protects the Includes terminals for 8-cylinder
lens. Also uses a metal inductive pickup that will not melt engines with early-type (socket)
if touched by hot parts and may be connected to the plug and late-type (HEI spark plug-
wires in either direction so there is no chance of false top) distributor caps. Multi-angle boots and terminals are
readings. Light has 6-ft. lead, and can be used on 4-, 6-, factory installed on one end.
and 8-cylinder engines with points or electronic ignitions.
Black Super Conductor Wire Set MSD31233
DynaForce™ Starters Red Super Conductor Wire Set MSD31239
Dynaforce Starters have a Set includes terminals for
3.4 HP motor and 4.4:1 gear engines with early type (socket)
reduction to easily turn over and late-type (HEI spark plug-
high-compression engines. top) distributor caps. 90° boots and terminals are factory
Downsized design installed on one end.
solves clearance
issues with oil pans Black Super Conductor Wire Set MSD31183
and exhaust. Billet Red Super Conductor Wire Set MSD31189
aluminum mount For engines with late model-type
can be clocked to (HEI spark plug-top) distributor
provide various caps. Multi-angle boots and
mounting options. terminals are installed on one end. 90° boots and
Ball bearing-supported armature and pinion gear help terminals are included.
ensure long life.
Red Super Conductor Wire Sets
Part No. Description
For late model LT-1 engines,
MSD5095 Chevy V8, 153- and 168-Tooth Flywheels, Red
Note: Mount is for straight bolt pattern
sets have boots and terminals
MSD50951 Chevy 168-Tooth, Staggered Mount, Red installed with a choice of straight or 90° boots loose.
MSD5096 GM LS-Series Engines, Red Part No. Description
MSD5090 Ford Small Block, 289-351W, Red MSD32129 LT-1 V8, Straight Plug Boots
MSD50901 Ford Small Block, V8, 3/8" Depth, Red MSD32139 LT-1 V8, 90° Plug Boots
MSD5092 Ford Big Block, 351M, 400, 429, Red
MSD5097 Pontiac/Olds 326, 455, Red Black Super Conductor Wire Set MSD31523
MSD50903 Black Ford 289-351W Red Super Conductor Wire Set MSD31529
MSD50933 Black Ford FE Engines For early Chrysler Hemi V8
MSD509503 Black Chevy V8 Starter Mount engines, kits include Hemi tubes
MSD50963 GM LS1-LS7, Black and HEI-style boots and terminals for distributor cap.
MSD509513 Chevy V8 Staggard Mount, Black
MSD509813 Chrysler 318-440, Black
Black Super Conductor Wire Set MSD32073
Red Super Conductor Wire Set MSD32079
For GM Gen-III engines
including the LS1 or LS6, wires
are ideal when relocating the coils. Both 90° and multi-
angle boots are supplied.

Red Super Conductor Wire Set MSD31889

A wire set made specifically
for Ford 4.6/5.4 DOHC modular
engines.

2023 - 2024 HOT ROD AND EARLY MUSCLE 357

Custom Fit 8.5mm Super Conductor Super Conductor 8.5 mm Race
Spark Plug Wire Sets Spark Plug Wire Sets
8.5mm Super Conductor wire has extremely low resistance 8.5 mm Spark Plug Wires have
and high RFI (radio frequency interference) suppression; extremely low resistance and
a combination which would seem to defy the laws of high RFI (radio frequency
physics. The low resistance is achieved through a helically interference) suppression.
wrapped, copper-alloy conductor which is then wrapped The low resistance is
around a ferromagnetic-impregnated center core. achieved through use of
Super Super a helically wrapped,
Model/Engine Conductor Conductor copper alloy
Red Black conductor which is
Chevrolet
1971-74 307, 327, 350, V8 Socket,
then wrapped around
Wires Over Valve Covers
MSD31659 MSD31653 a ferro-magnetic
1975-82 267, 305, 350, 400 V8 with HEI, impregnated core.
MSD31359 MSD31353
Wires Over Valve Covers Super Conductor wire
1975-82 All 350 Corvette, V8 with Long Wires
MSD31769 MSD31763
sets are available in red (part number ends in 9) or black
Below Exhaust Manifold (part number ends in 3).
1977-87 All 366, 427, 454, V8 with HEI MSD31779 MSD31773
Super Super
1984-91 Corvette 350 TPI, V8 with HEI MSD31459 — Conductor Conductor
Chrysler/Plymouth/Dodge Application Style Set Set
1973-On 318, 340, 360 with Stock Distributors, Red Black
MSD31309 — Small Block Chevy
Socket Style
Ford MSD/Socket Cap,
Socket MSD31599 MSD31593
1977-93 Mustang, Thunderbird, LTD, Wires Under Headers*
MSD31329 MSD31323 MSD/Socket Cap,
Granada, 302 (5.0L), V8 with HEI Socket MSD31659 MSD31653
1970-76 302 Cars with HEI MSD35399 — Wires Over Valve Covers*
1965-76 351C, 351W, 352, 390, 400, 429, 460 MSD/HEI Style Cap,
MSD31389 MSD31383 HEI MSD31359 MSD31353
Car Socket Style Wires Over Valve Covers†
1965-76 351C, 351W, 352, 390, 400, 429, 460 MSD/HEI Style Cap,
MSD35389 MSD35383 90° MSD31249 MSD31243
Car with HEI Cap Wires Under Headers†
Oldsmobile MSD/HEI Style Cap,
HEI MSD31769 MSD31763
1974-83 Cutlass, Delta, Tornado, X-Long Wires Under Headers†
MSD31369 MSD31363 Crab Cap With HEI Terminals,
All 260, 307, 350, 403, 455 with HEI HEI MSD30479 —
Pontiac Wires Under Headers
1975-92 Firebird, Grand-Am, LeMans, Small Block Ford
MSD31369 MSD31363 Late MSD/HEI Style Cap HEI MSD31329 MSD31323
All 260, 265, 301, 350 without Turbo, with HEI
1981-Up Firebird, Grand Am, LeMans, Grand Prix MSD31409 — * Early style. † Late style.

Carbureted Applications
“Hitman” System for Holley 4bbl “Phase 3" System for Holley 4bbl
NXS40040-10 NXS30040-10
The “Hitman” is an An entry-level
economical beginner system, the “Phase
system with a Pure- 3” has six power
Flo bottle valve and settings for 50-
stainless steel bottle 500 horsepower.
brackets. It’s adjustable System includes
to 100, 150, and 200 spray bar plate,
horsepower levels. large nitrous and
Fits Holley 4150 series fuel solenoids, 14
4-barrel carburetors feet of stainless
and includes spray bar plate, nitrous and fuel solenoids, steel line, ten-
stainless steel line, ten-pound bottle, brackets, hardware, pound bottle
and installation instructions. with stainless steel brackets, heavy-duty 6-amp relay,
hardware, and instructions. Race fuel required beyond
150 horsepower setting.

358 2023 - 2024 HOT ROD AND EARLY MUSCLE

Remote Bottle Opener Ford 4.6L 2-Valve Plate System
NXS11107 NXS20946-10
After five years Boost 4.6L V8
of research and output by 50 to
development, Nitrous 150 horsepower
Express introduces and tons of
the “Next Generation” torque at the
remote bottle opener, rear wheels.
which prevents surging Kit uses “spray
and horsepower loss. barless”
Complete with a Weatherpack wiring kit and hardware. technology
and includes
Pure-Flo 45 bottle valve, a ten-pound bottle, billet nitrous
EFI Applications plate and all horsepower settings, hardware, and full-
color instruction manual.
Stage One EFI Single Nozzle
“Shark” System 5.0L Foxbody EFI Nitrous Plate System
NXS20922-10 NXS20955-10
Stage One Ford Designed for the 1986-93
EFI system is for Mustang GT, the Nitrous
import or domestic Express plate system
applications. The replaces spraybars
patented “Shark” with a billet plate for
nozzle is fully maximum atomization
adjustable in 35, 50, and distribution. The
and 75 horsepower 75mm inner diameter
increments for plate installs in place of
4- and 6-cylinder the factory EGR spacer
engines. Add up to for easy installation. Smaller inner diameter inserts are
150 horsepower for V8s. Kit includes stainless steel line, available, if needed. Included fuel line adapter simplifies
nitrous filter, fittings, ten-pound bottle, Pure-Flo bottle installation and eliminates the need to cut fuel lines.
valve, stainless steel bottle brackets, switches, hardware, Systems include extra-long braided stainless steel N2O
and instructions. and fuel lines, master arming switch, relay, relay harness
jetting for 35, 50, 75, 100, 125, 150, 200, and 250 WHP, and
required installation hardware.

Nitrous Accessories
Part No. Description
NXS15509 -4AN Nitrous Flo-Thru Pressure Gauge, Includes Manifold
NXS15600 -4AN Nitrous Purge Valve, Includes Manifold, Push Button and Vent Tube NXS15509
NXS15601 -6AN Nitrous Purge Valve, Includes Manifold, Push Button and Vent Tube NXS15600
NXS11712L Blow-off Safety Disc 3000 psi
NXS11721 -4AN Bottle Nipple for New Lightening 45 Valve NXS11721
NXS11722 -6AN ORB Bottle Nipple Fitting
NXS11724 -4AN Bottle Nipple for Lightning 500 Valve
NXS11725 -6AN Bottle Nipple for Lightning 500 Valve
NXS11712L

2023 - 2024 HOT ROD AND EARLY MUSCLE 359

Phoenix Direct Drive System
All NVU 6-gauge kits with programmable speedometer have the new unique Phoenix Direct Drive
system. NVU Direct Drive is a new way to wire up multiple gauge kits to make installation easier,
faster and trouble-free. Step 1: Connect power, ground, lights, and sensors (this is the hardest
part). Step2: Plug AMP connectors into the speedo and tach. Step 3: Plug the 2-1/16” gauge harness
into the appropriate socket on the drive board, program, and that’s it!

Gen II 1970-78 Camaro Gauge Package 1967-72 GM Truck Retro Package

NVG01670-03 NVG73731-01
Engineered The handcrafted Retro
as a direct gauge package is a
replacement direct replacement that
for the offers that factory look.
1970-78 Gen Best of all, there is no
II Camaro need for any cutting
gauge or modifications. The
packages offer a factory installed look without the package includes 4-3/8" diameter speedometer, 4-3/8"
need for any modifications or cutting. Each package diameter tachometer, a fuel gauge 0-90 Ohms, water
is sold complete with 4-3/8" diameter speedometer, temperature gauge, oil pressure gauge, volt meter, all
4-3/8" diameter tachometer, water temperature gauge, necessary senders, a remote programming button,
oil pressure gauge, volt meter, fuel level gauge, center brackets, and mounting hardware. Phoenix Direct Drive
mount shift indicator, necessary senders, and mounting System.
bracket. Come in white and black faced dials. Phoenix
Direct Drive System. 1969-70 Mustang
Part No. Description 67 Series
NVG01670-01 1970-78 Camaro, Performance, Black
NVG01670-03 1970-78 Camaro, Performance, White NVG67408-01
1969-70 Mustang gauges
and kits from NVU offer a
Woodward Series factory installed finish with
The Woodward Series, the original period style graphic styles to suit the theme of your ride. Each kit has
instruments. everything you need to install in the factory gauge bezel.
The Brackets install in about 15 minutes, with no grinding or
Woodward cutting. Phoenix Design System.
Series
features Performance & Performance II Series
bold, wrap- Direct-Fit Truck Gauge Kits
around Deco Performance
stainless Series
steel styled gauges
bezels with NVG37205-02 offer great
30’s -40’s OEM-style
style gauge face graphics and an exclusive chrome performance
inner accent ring that stands out under the domed glass graphics
lens. The Woodward Series adds a luxurious look to any with a NVG73026-01
classic truck build. Programmable speedometer features modern and
stepper motor technology that is easy to configure: hit racy look, a perfect match for Pro-touring builds or any
the button, drive a mile, hit again, and you’re done! The vehicle that wants an updated look. They feature bold
programable fuel level gauge has dip switches to set the design with modern pointers, perimeter incandescent
correct sender Ohm rating. Features Phoenix Direct Drive lighting, and new ranges to match today's power plants.
System. Made in the USA. Performance II Series Instruments have the combined
Part No. Description style of European sports car and racing gauges. This
NVG47372-01 1947-53 Chevrolet/GMC Truck 3-1 Black performance look has a classic gauge feel without
NVG47372-02 1947-53 Chevrolet/GMC Truck 3-1 Beige the look of a racing gauge. Full-sweep stepper motors
NVG37205-02 Universal 4-3/8" Gauge Kit, Beige provide higher dial resolution, with blue LED back-lighting
at night. 6-gauge kit panels OEM dash fitment. Phoenix
Direct Drive System.
Part No. Description
NVG73011-01 1967-72 Chevy Truck Performance Black
NVG73026-01 1973-87 Chevy F/S Performance II Black
NVG89101-03 1988-94 GM Truck F/S Performance Speedo White

360 2023 - 2024 HOT ROD AND EARLY MUSCLE

Hurricane Engine-Driven Fan Shrouds GM LS1 Problem Solver Connection Kit
Hurricane fan shrouds are designed for a precise
fit with many popular Northern radiators.
NRAZ17625
Constructed from fully formed, .063" aircraft Problem Solver kit includes the
aluminum, shrouds utilize an adjustable, 3"-tall necessary radiator connections
collar for use with 15"-20" diameter fans, and may to allow compatibility with GM LS1
be used with crossflow or downflow radiators. engines. Kit includes aluminum 1-3/8"
Sold complete with necessary hardware and and 1-1/2" hose connections, and
instructions. coolant temperature bung.
Part No. Northern Radiator Applications
205147, 205152, 205165, 205166, 209601B, 209613, Stic-Tite Radiator Repair
NRAZ40021
209617, 209671, 209675, 209635, 209636
NRAZ12156
205148, 205153, 205167, 205168, 205186, 209602B, 209614,
NRAZ40022
209618, 209624, 209625, 209638, 209639, 209672, 209676 Repair aluminum radiator leaks
205027, 205056, 205062, 205063, 205066, 205149, quickly and effectively. Stic-Tite is
NRAZ40023 205154, 209603B, 209615, 209619, 209626, 209627, easy to use and apply; simply heat
209640, 209641, 209673, 209677 surface until product begins to melt
NRAZ40026 205026, 205060, 205061, 205065 and follow by applying a generous
amount to desired area.
Silicone V8 Engine Coolant
Plumbing Kit Radiator Modification Kit
NRAZ71051 NRAZ12013
Universal kit includes straight, 45° and Includes all of the components
90° reinforced silicone coolant hoses, and from the Custom Radiator Kit: one
straight and 45° angle mandrel-bent, aluminized steel 1-1/2" hose connection, one 1-3/4"
tubes. connection, one billet aluminum
filler neck, one overflow tube, one
High-Efficiency Transmission Oil Cooler Kits weld-on bung, and one draincock.
Lightweight, compact, and
efficient, coolers provide Relay and Temperature Switch Kit
reduced transmission oil NRAZ40078
temperatures, thereby
Designed for fan assemblies
increasing durability. Each
drawing less than 40 amps,
kit is sold complete with
switch is set to activate fan at
mounting hardware, hose,
185°F and turn it off at 165°F.
and fittings.
Includes wiring harness and
Part No. Description single-wire 3/8"NPT stainless steel temperature switch.
NRAZ18027 Transmission Oil Cooler Kit, 9-3/4" x 5-3/4" x 1-1/4" Overall
NRAZ18028 Transmission Oil Cooler Kit, 16-1/4" x 8" x 1-1/2" Overall

High-Efficiency Fan Control Kit Radiator Accessories

NRAZ18350 Part No. Description
Cooling fan controller uses pulse NRAZ12014 Radiator Flange Mounting Brackets, 2 Pcs.
width modulation to help maximize NRAZ21230 Universal Rubber Mounting Pads, 1-3/4" x 6-3/16", 2 Pcs.
cooling efficiency. Features a 40-amp NRAZ21260*
Radiator Mounting Kit, Includes (2) Upper
capacity, A/C override, and overheating & (2) Lower Mounts
protection. Included 180°F temperature *Requires use of (2) NRAZ21230 rubber mounting pads
sensor.

Dual 11" Electric Fan and Shroud Kit

NRAZ40075
Dual 12V 11" electric fans
work with mounted in
durable aluminum shroud
move up to 2726 CFM of air
while drawing just 28 amps.
Overall dimensions 18-1/8"
x 22-3/8" x 4-3/8". Wiring
harness and controller not
included.

2023 - 2024 HOT ROD AND EARLY MUSCLE 361

Muscle Car & Hot Rod Radiators
Application-specific aluminum radiators are lighter than OEM copper/brass units, yet offer up to 75% more cooling capacity.
Radiators are manufactured using reinforced, die-stamped tanks, thick hose connections, billet-machined filler necks, and
all-welded construction. Models for automatic transmissions include high-performance, 7-plate internal oil coolers.

Part No. Description Overall Dimensions Inlet Outlet

Muscle Car Radiators
NRA205026* 1964-86 GM Cars 33" x18-3/8" x 3-1/8" Dual 1-5/16"/1-1/2" 1-1/2"
NRA205055* 1964-85 GM Cars 32-15/16" x 18-3/8" x 3-1/8" Dual 1-5/16"/1-1/2" 1-1/2"
NRA205027* 1967-87 GM Full-Size Cars/1973-81 Trucks, A/T 30-3/4" x 18-3/8" x 3-1/8" 1-5/16"-1-1/2" 1-1/2"
NRA205056* 1967-87 GM Full-Size Cars/1973-81 Trucks, M/T 30-3/4" x 18-3/8" x 3-1/8" 1-5/16"-1-1/2" 1-1/2"
NRA205072 1967-69 Camaro/Firebird, A/T 25-7/8" x 18-7/8" x 3-1/8" 1-1/2" 1-3/4"
NRA205125 1967-69 Camaro/Firebird, M/T 25-7/8" x 18-1/2" x 3-1/8" 1-1/2" 1-3/4"
NRA205133 1967-69 Camaro SS, A/T 27-3/4" x 18-7/8" x 3-1/8" 1-1/2" 1-3/4"
NRA205184 1967-69 Camaro SS, M/T 27-3/4" x 18-7/8" x 3-1/8" 1-1/2" 1-3/4"
NRA205028* 1966-88 GM Cars, A/T 25-3/8" x 18-5/8" x 3-1/8" Dual 1-5/16"/1-1/2" 1-1/2"
NRA205179 1967-72 Chevy Truck A/T 32-3/4" x 18-3/8" x 3-1/8" 1-1/2" 1-3/4"
NRA205030 1964-66 Mustang/1963-68 Comet, A/T 20-1/4" x 18-1/2" x 3-1/8" 1-1/2" 1-3/4"
NRA205132 1967-69 Ford Mustang, A/T or M/T 19-7/8" x 25-1/2" x 3-1/8" 1-1/2" 1-3/4"
NRA205064 1964-66 Ford/1960-65 Mercury, A/T or M/T 20-1/4" x 18-1/2" x 3-1/8" 1-1/2" 1-3/4"
NRA205070 1971-76 Chrysler Cars, A/T 26-1/4" x 18-1/2" x 3-1/8" 1-1/2" 1-3/4"
NRA205071 1966-78 Mopar, Dodge, Dart, Charger, Challenger 26-1/4" x 18-1/2" x 3-1/8" 1-1/2" 1-3/4"
NRA205065 1973-91 GM HD Trucks 33" x 18-1/8" x 3-1/8" Dual 1-5/16"/1-1/2" 1-1/2"
NRA205069 1992-93 Blazer, 1988-200 C/K Pickup, 1992-93 Suburban 38-1/2" x 18-5/16" x 3-1/8" 1-1/4" 1-1/2"
1967-70 Mustang, 1968-70 Cougar, 1971-73 Maverick, Comet, 1-3/4"
NRA205214 19-3/4" x 21-7/8" (Includes Brackets x 2-1/2" 1-1/2" Upper Right
1964-68 Galaxie Lower Right
NRA205137 1967-69 Mustang, 1968-69 Mercury Cougar 19-7/8" x 25-1/2" x 3-1/8" 1-1/2" 1-3/4"
NRA205138 1982-94 Ford Ranger W/V8 Conversion 21-5/8" x 15-7/8" x 3-1/8" 1-1/2" 1-1/2"
1955-57 Chevy Belair, Caprice, Impala
NRA205183 31" (36 Including Brackets) x 15-1/4" x 3" 1-3/8" Right 1-1/2" Right
with LS Engine Conversion
NRA205066 1977-82 Corvette, A/T 29-7/8" x 18-1/2" x 3-1/8" 1-1/4" 1-1/2"
NRA205059 19641/2-66 Mustang, 1960-67 Ford/Mercury, M/T 20-1/4" x 18-1/2" x 3-1/8" 1-1/2" 1-3/4"
NRA205198 1960-76 Dodge/Plymouth "A" Body, 318/340, A/T 21-3/4" x 21-3/4" x 3-1/4" 1-1/2" 1-3/4"
NRA205199 1960-76 Dodge/Plymouth "A" Body, 318/340, M/T 21-3/4" x 21-3/4" x 3-1/4" 1-3/4” 1-3/4”
NRA205122 1955-57 Chevy, A/T 22-3/4" x 22-1/2" x 3-1/8" 1-1/2” 1-3/4”
NRA205142 1955-57 Chevy w/ Crossflow Conversion, A/T 31" x 16" x 3-1/8" 1-1/2” 1-3/4”
Hot Rod Downflow Radiators
NRA205155 1950s-60s Medium/Compact, Ford/Chrysler Hose, A/T 20-1/4" x 19-3/4" x 3-1/8" 1-1/2" 1-3/4"
NRA205156 1950s-60s Medium/Compact, GM Hose, A/T 20-1/4" x 19-3/4" x 3-1/8" 1-1/2" 1-3/4"
NRA205159 1930s-50s Medium, GM Hose, A/T 27" x 19-3/4" x 3-1/8" 1-1/2" 1-3/4"
23-5/8" x 25-3/8"
NRA205191 Mopar B & E Body Style with Original 26" Core 1-1/2" 1-3/4"
(29 1/4" Including Brackets) x 3-1/8"
* Radiators include 5/8" capped heater return.

Battery Charging Accessories

Part No. Description
Battery Corrosion Preventative,
NOCA202
for Battery Terminals, Cables, Etc., Aerosol 12.25 oz.
Battery Corrosion Terminal Protectors,
NOCB603
Provides a Barrier against Acid Fumes, Package of 50
X-Connect Battery Clamp Connector,
NOCGC001
Allows Quick Battery Charger Connection
X-Connect Eyelet Terminal Connector,
NOCGC002
Allows Quick Battery Charger Connection
NOCGC004 X-Connect 10' Extension Cable NOCGC004
NOCA202 NOCB603 NOCGC001

362 2023 - 2024 HOT ROD AND EARLY MUSCLE

GENIUS5 5-Amp Battery GENIUS2X4 4-Bank Battery
Charger and Maintainer Charger and Maintainer
NOCGENIUS5 NOCGENIUS2X4
Compact, lightweight, and portable, Capable of charging four different
the 5-amp Genius5 may be used to batteries at thesame time with 2 amps
charge 6V and 12V lead-acid and per bank, the G4 automatic battery
12V lithium-ion batteries up to 120 charger and maintainer may be used
amp-hours. Unit may also be used to charge 6v and 12V lead-acid and AGM batteries, and
as a battery maintainer to keep starter and deep-cycle 12V lithium-ion batteries up to 40 amp-hours. Safely
batteries fully charged. Safely monitors battery actively monitors battery status with zero overcharge.
with zero overcharge, and can charge completely dead
batteries.
GENIUS2 2-Amp Battery
GENIUS10 10-Amp Battery Charger and Maintainer
Charger and Maintainer NOCGENIUS2
Weighing just over a pound, the
NOCGENIUS10 Genius2 2.0-amp charger and
Automatic portable battery charger maintainer is compact and easy-
is compatible with 6V and 12V lead- to-use. May be used to charge
acid and 12V lithium-ion batteries. motorcycle, ATV, snowmobile, personal watercraft,
Capable of charging batteries up and lawn mower and other small batteries, while also
to 230 amp-hours, unit may also functioning as a battery maintainer for cars, boats, and
be used as a battery maintainer RV’s. Use the Force Mode to charge even completely
to keep starter and deep-cycle batteries fully charged. drained batteries. Charges 6V and 12V lead-acid, AGM,
Force Mode allows charging of even completely dead and lithium-ion batteries up to 40 amp-hours.
batteries.
GB70 2,000-Amp UltraSafe
GB40 1,000-Amp UltraSafe Lithium
Lithium Jump Starter
Jump Starter Powerful, lightweight GB70
NOCGB40 has the ability to jump start
Portable lithium-ion gas engines up to 8 liters and
powered battery jump diesel engines up to 6 liters.
starter offers 1,000 amps Unit additionally doubles as
for jump starting a dead a portable power source for recharging USB devices
battery in seconds. Safe including phones, tablets, etc. Safe and easy to use, unit
and easy to use, unit provides spark-proof connections and reverse-polarity
provides spark-proof protection. Heavy-duty molded EVA case available (sold
connections and reverse polarity protection. Jump separately).
starter has the ability to jump gas engines up to 6 liters
Part No. Description
and diesel up to 3 liters. NOCGB70 GB70 UltraSafe Lithium Jump Starter
Note: For use with lead-acid batteries only. NOCGBC014 EVA Protective Case for GB70 Jump Starter
Note: For use with lead-acid batteries only.
GB150 4,000-Amp UltraSafe Lithium Jump
Starter 1-Bank 5-Amp On-Board Battery
Powerful lithium-ion Charger
battery jump starter
delivers 4,000 amps of
NOCGEN5X1
power, sufficient to jump Innovative, GEN5X1 on-board
gas and diesel engines up battery charger is designed
to 10 liters and more. The to charge and maintain a
GB150 can also power tire single 12-volt battery. Unit can
inflators, power inverters, and more. May also be used to charge starter and deep-cycle
charge USB devices including phones, tablets, etc. Easy batteries up to 120 amp-
and safe to use, unit includes spark-proof connections hours. Includes spark-proof
and reverse polarity protection. Heavy-duty molded EVA technology and reverse-polarity protection. Compatible
case available (sold separately). with Wet, Gel, AGM, lithium-ion, and maintenance-free
batteries. Available AC port plug eases on-board battery
Part No. Description charger power access.
NOCGB150 GB150 UltraSafe Lithium Jump Starter Part No. Description
NOCGBC015 EVA Protective Case For GB150 Jump Starter Related Component
Note: For use with lead-acid batteries only. NOCGCP1 AC Port Plug with Extension Cord

2023 - 2024 HOT ROD AND EARLY MUSCLE 363

Powershot™ Cheater™
NOS05001 NOS02001
Gain up to 125 Meets the needs of
horsepower. the serious street
Powershot 1/2" enthusiast using a
injector plate fits Holley 4-barrel who
between carburetor wants an extra 150 to 250 horsepower. Utilizes a 1/2" thick
and intake manifold. injector plate that fits between the carb and manifold.
Built-in spray bars Includes a full ten pound nitrous oxide bottle, NOS and
simultaneously inject fuel solenoids, filters, four stages of jets, hoses, and all
fuel and nitrous at the hardware for installation.
touch of a button. Easily installed kit includes a ten-
pound bottle, nitrous and fuel solenoids, injector plate, Nitrous Accessories
filters, fittings, switches, braided stainless steel AN
hose, and hardware. For V8 Holley 4-Barrel only.
Purge Valves
Super Powershot™ The primary purpose
of a purge valve is
NOS05101 to release trapped air or
Super Powershot’s gaseous nitrous from feed line(s) to
has adjustable ensure consistent performances.
power levels of 50
Part No. Description
to 150 additional
NOS16030 -4AN Line
horsepower. Thin NOS16032 -6AN Line
1/2" injector plate
fits between the
carburetor and intake
Ntimidator™ Illuminated LED
manifold. Includes Purge Kit
ten-pound nitrous NOS16039
bottle, nitrous and Unique purge kit has a bright blue LED to
fuel solenoids, illuminate a four-foot plume of nitrous
injector plate, filters, fittings, jets, switches, stainless from the purge nozzle. Installs easily with
steel hose, and installation hardware. For V8 Holley common hand tools. Fits all nitrous kits with
4-barrel only. a -4AN feed line.

Sniper™
NOS07001 Bottle Brackets
Take out the competition Steel construction, black vinyl-coated
with an economical “plain brackets securely hold bottle at the
wrap” nitrous system, proper angle for maximum flow.
capable of an additional Part No. Description
50-150 horsepower. NOS14125 10 lb. and 15 lb. New Style Bottle, 7" Dia. Steel
Includes ten-pound NOS14140 10 lb. and 15 lb. Quick-Release Hinged Aluminum Bracket
nitrous bottle, -6AN
stainless steel line,
injector plate, solenoids,
fittings, switches,
filters, and hardware for
installation. For Holley 4-barrel. NOS16160 NOS16169
Bottle Components
Part No. Description
NOS16160 Nitrous Bottle Valve Blow Down Tube
NOS16169 Racer Safety Blow-Off Cap with Diffuser, -8AN, 2nd Gen.

Micro Throttle Switch

NOS15640
Full-throttle activation is
possible with the NOS Micro
Switch. Prevents system
activation at less than full
throttle.

364 2023 - 2024 HOT ROD AND EARLY MUSCLE

Optima Batteries
The OPTIMA RedTop battery delivers high-power cranking ability with greater resistance to the biggest
causes of battery failure. The RedTop is commonly used in hot rods, off-road vehicles, and other
applications where a leak-proof, high-power, long-lasting starting battery is ideal.
Cold
Cranking Cranking Capacity Dimensions
Amps @ Amps @ Reserve (C/20 Internal Weight Post Group/
Part No. Voltage 0°F 32°F Capacity Rate) Resistance Length Width Height (lbs.) Type Type #
OPT8004-003 12V 800 1000 100 50 .0030 10-1/16" 6-15/16" 7-7/8" 38.8 Dual SAE/GM 34/78
OPT8022-091 12V 720 910 90 44 .0030 9-3/8" 6-13/16" 7-3/4" 33.1 Dual SAE/GM 75/25
OPT8025-160 12V 720 910 90 44 .0030 9-3/8" 6-3/4" 7-11/16" 31.7 SAE Post 25
OPT8002-002 12V 800 1000 100 50 .0030 10-1/16" 6-7/8" 7-7/8" 37.9 SAE Post 34
OPT8003-151 12V 800 1000 100 50 .0030 10-1/16" 6-7/8" 7-7/8" 37.9 SAE Post 34R
OPT8020-164 12V 720 910 90 44 .0030 9-3/8" 6-3/4" 7-11/16" 31.7 SAE Post 35
OPT8078-109 12V 800 1000 100 50 .0030 10-1/16" 7-5/16" 7-1/4" 39.5 Side Terminal 78
OPT8010-044 6V 800 1000 100 50 .0019 10-1/16" 3-5/8" 8 -1/8" 18.5 SAE Post N/A

The OPTIMA YellowTop is one of the only true dual-purpose batteries available. It is commonly used in
any application that demands cranking power and heavy cycling.
Cold
Cranking Cranking Capacity Dimensions
Amps @ Amps @ Reserve (C/20 Internal Weight Group/
Part No. Voltage 0°F 32°F Capacity Rate) Resistance Length Width Height (lbs.) Post Type Type #
OPT8014-045 12V 750 870 120 55 .0028 10-1/16" 6-15/16" 7-7/8" 43.5 Dual SAE/GM 34/78
OPT8042-218 12V 620 770 100 48 .0030 9-3/8" 6-13/16" 7-3/4" 37.8 Dual SAE/GM 75/25
OPT8012-021 12V 750 870 120 55 .0028 10-1/16" 6-7/8" 7-7/8" 42.9 SAE Post 34
OPT8040-218 12V 620 770 100 48 .0030 9-3/8" 6-3/4" 7-11/16" 36.4 SAE Post 35
OPT8071-167 12V 450 575 66 38 .0046 9-5/16" 5-1/16" 8-15/16" 26 SAE Post 51
OPT8073-167 12V 450 575 66 38 .0046 9-5/16" 5-1/16" 8-15/16" 26 SAE Post 51R
OPT8171-767 12V 450 575 66 38 .0046 9-5/16" 5-1/16" 8-15/16" 26 Thin Post T1 S46B24R
OPT8050-160 12V 900 1125 155 75 .0025 12-13/16" 6-9/16" 9-3/8" 59.8 3/8" Stainless Stud 31T
OPT8051-160 12V 900 1125 155 75 .0025 12-3/16" 6-9/16" 9-3/8" 59.8 SAE Post 31A
OPT8037-127 12V 830 1025 140 66 .0025 12-3/16" 6-13/16" 8-3/4" 53.2 SAE Post 27F

The OPTIMA BlueTop battery has all the valuable characteristics of its two brothers - the RedTop and
YellowTop. It’s perfect for on-board electronics or stereo systems and RV’s with “creature comforts”
that tend to drain batteries quickly. The BlueTop is the battery for those who simply need a sure-
starting, strong-cranking, maintenance-free power source.
Cold
Cranking Cranking Capacity
Amps @ Amps @ Reserve (C/20 Internal Dimensions Weight Group/
Part No. Voltage 0°F 32°F Capacity Rate) Resistance Length Width Height (lbs.) Post Type Type #
OPT8027-127 12V 800 1000 140 66 .0025 12-3/16" 6-13/16" 8-3/4" 53.8 Dual SAE 5/16" Stainless Stud 27
OPT8006-006 12V 800 1000 100 50 .0030 10-1/16" 6-7/8" 7-15/16" 38.4 Dual SAE 5/16" Stainless Stud 34
OPT8016-103 12V 750 870 120 55 .0028 10-1/16" 6-7/8" 7-15/16" 43.5 Dual SAE 5/16" Stainless Stud 34
OPT8052-161 12V 900 1125 155 75 .0025 12-13/16" 6-9/16" 9-3/8" 59.8 Dual SAE 5/16" Stainless Stud 31

2023 - 2024 HOT ROD AND EARLY MUSCLE 365

Odyssey Battery
Odyssey batteries provide up to twice the overall power and three times the life compared to
traditional batteries. 12-volt batteries are offered for a wide variety of applications including
automotive, racing, marine, commercial, and powersports.
Battery Type Terminal CCA CA BCI Group Size Length in. (mm) Width in. (mm) Total Height in. (mm) Weight (lbs)
Extreme Series
ODYPC310 M4 Receptacle 100 200 — 5.43 (138.0) 3.90 (99.0) 3.98 (101.0) 5.9
ODYPC545 M6 Female 185 240 — 7.00 (177.8) 3.38(85.9) 5.17 (131.3) 11.5
ODYPC545MJ M6 Female 185 240 — 7.00 (177.8) 3.38(85.9) 5.17 (131.3) 12
ODYPC680 M6 Female 220 300 — 7.27 (184.7) 3.11 (79.0) 6.67 (169.4) 15.4
ODYPC680MJ M6 Female 220 300 — 7.27 (184.7) 3.11 (79.0) 6.67 (169.4) 16
ODYPC625 M6 Stud 265 350 — 6.70 (170.2) 3.90 (175.0) 13.2 (6.0) 13.2
ODYPC925 M6 Female 380 500 — 6.64 (168.6) 7.05 (179.0) 5.04 (128.0) 26
ODYPC925T SAE 330 610 — 6.64 (168.7) 7.05 (179.1) 5.83 (148.0) 23.8
ODYPC925MJT SAE 380 500 — 6.64 (168.6) 7.05 (179.0) 5.04 (128.0) 26.5
ODYPC950 M6 Stud 400 600 — 9.8 (250.0) 3.8 (97.0) 6.1 (156.0) 20.0
ODYODS-AGM40E M6 Stud 500 650 — 9.8 (250.0) 3.8 (97.0) 8.1 (205.7) 27.5
ODYPC1200MJT SAE 550 725 — 7.87 (199.9) 6.66 (169.1) 6.80 (172.7) 40
ODYPC1700MJT SAE 875 1175 — 13.02 (330.7) 6.62 (168.2) 6.93 (176.0) 63
ODYPC1700T SAE 875 1175 — 13.02 (330.7) 6.62 (168.2) 6.93 (176.0) 60.9
ODY34-PC1500T SAE 880 1050 34 10.85 (275.6) 6.99 (177.5) 7.82 (198.6) 49.5
ODY34/78-PC1500DT SAE/GM Side 880 1050 34/78 10.85 (275.6) 6.99 (177.5) 7.82 (198.6) 49.5
ODYODX-AGM34R SAE 850 1050 34R 10.9 (277) 6.8 (173) 7.8 (198) 50.9
ODYODX-AGM65 SAE 930 1070 65 11.8 (300) 7.2 (183) 7.6 (193) 54
Performance Series
ODY49-950 SAE 950 1150 — 13.9 (353) 6.9 (175) 7.4 (188) 62.8
ODY94R-850 SAE 840 1000 — 12.4 (315) 6.9 (175) 7.4 (188) 54.8
ODYODP-AGM34 SAE 792 990 34 10.8 (274) 6.8 (173) 7.9 (201) 46.6
ODYODP-AGM78 GM Side 792 990 78 10.8 (274) 6.8 (173) 7.4 (188) 47.1
ODYODP-AGM96R SAE 600 700 96R 9.5 (241) 6.9 (175) 6.8 (173) 40.3
Note: Batteries with MJ suffix include a metal case for added heat protection.

Spacer for Group 34 Batteries

ODY2220-1251
Black plastic spacer allows use of ODY34-PC1500 batteries where a Group 24 or 27 is required.

Pre-Assembled Sealed Beam Illuminated Wheel Rings

This quality glass lens sealed beam A “head-turning" street modification
includes a pre-installed Oracle SMD Halo that lights up wheel wells offers just
and offers a composite reflector housing. enough sophistication and flare.
The unit accepts a H4 bulb and is covered The LED flex strips mount to brake
by a one-year full-replacement warranty. rotor dust shield and are designed
Sold individually. to withstand high temperatures. 12V
Part No. Description powered, 15-1/2" diameter, universal
5-3/4" Diameter Round Sealed Beam fitment, and includes mounting
ORA6904-001 White hardware. One-year warranty.
ORA6904-002 Blue
Part No. Description
ORA6904-003 Red ORA4215-001 White
ORA6904-004 Green
7" Diameter Round Sealed Beam
ORA6905-001 White
ORA6905-002 Blue
Rectangular Sealed Beam
ORA6908-001 7" x 6", White

366 2023 - 2024 HOT ROD AND EARLY MUSCLE

LED Fiber Optic Interior Lighting Kits ColorShift™ Underbody Lighting Kit
Create dynamic interior
lighting effects with Oracle ORA4229-332
fiber optic kits. They Use Oracle's patented
combine flexible fiber optic Colorshift technology
cables with LED light heads to achieve dramatic
to create accent lights lighting effects on
that can follow virtually show cars! Use the
any interior contour and free smartphone app
are controlled via the to select the color and
included remote or Oracle's choose from more than
free smartphone app. 200 pre-programmed
Sold in complete kits with motion patterns. Set includes (2) 4-foot and (2) 6-foot LED
Colorshift™ light heads, color-changing strips, Bluetooth controller, and mounting
fiber optic cable, Bluetooth hardware.
controller with remote, switched power plug, and
installation tool. Additional ColorSHIFT or single-color
lightheads available separately. LED Turn Signal/Tail Lamp Bulbs
Part No. Description LED bulbs achieve brighter, crisper
Complete Fiber Optic Kits
light while using only 1/10th of the
Lighting Kit with 2 ColorSHIFT LED Light Heads,
ORA4233-333-2
Controller, and 10' of Fiber Optic Cable
power of an incadescent bulb, and
Lighting Kit with 4 ColorSHIFT LED Light Heads, can last up to 100,000 hours. These
ORA4233-333-4 13 LED bulbs are suitable for brake
Controller, and 20' of Fiber Optic Cable
Lighting Kit with 6 ColorSHIFT LED Light Heads, lamps, tail lights, turn signals,
ORA4233-333-6
Controller, and 30' of Fiber Optic Cable reverse lights, marker lights, etc.
Additional LED Light Heads Sold each.
ORA4230-002 LED Light Head, Blue, Each
Note: When used as a turn signal bulb, a load equalizer is
ORA4230-003 LED Light Head, Red, Each
required to prevent rapid flash.
ORA4231-333-1 ColorSHIFT Light Heads, 2-Pack
ORA4231-333-2 ColorSHIFT Light Heads, 4-Pack Part No. Description
ORA4231-333-6 ColorSHIFT Light Heads, 6-Pack Type 1156 Style Bulbs
ORA5005-001 13-LED Bulb, Cool White, Each
ORA5005-005 13-LED Bulb, Amber, Each
Type 1157 Style Bulbs
ORA5007-001 13-LED Bulb, Cool White, Each
ORA5007-005 13-LED Bulb, Amber, Each

Street Rod Non Coil-Over Shocks

Polished, chrome-plated steel-body shocks have urethane
bushings, and steel sleeves for 1/2" mounts. Sold Individually.

Ride Height Mounted

Part No. Closed Compression Length Open Extended Length Mounting Ends
Length
PROSM400 10" 8" 12-1/10" Stud/Eye
PROSM500 12" 9-1/2" 14-1/2" Eye/Eye
PROSM600 13-1/2" 10-1/2" 16-1/2" Eye/Eye

2023 - 2024 HOT ROD AND EARLY MUSCLE 367

Steel Automotive Driveshafts
Steel automotive driveshafts can be built to fit any application. Seamless DOM (Drawn Over Mandrel) tubing is the basis for
producing finely balanced driveshafts. Determine the following information to order a driveshaft including transmission type
for the yoke, rear U-joint series, and shaft measurements. If there are any questions feel free to contact us.
A part number from each step provided is needed to order a driveshaft.
Step 1
Identify the transmission for the slip yoke part number
Part No. Description
PST100005 28 Spline C4, Toploader, Tremec T-5, Ford AOD
PST100006 31 Spline C6, Tremec T-45, Ford T-56, TKO 3650
27 Spline GM Powerglide, T-200, T-350, 700R4, 4L60E,
PST100007
Muncie 4 Speed, GM T-56.
PST100008 32 Spline GM T-400, 4L80E, Richmond, Super T-10

Step 2 Step 3
Driveshaft Length Identify Rear U-Joint
This measurement is from the transmission case to the • GM joints with placement tabs – 1310 series.
center line of rear U-joint. See the diagram below. • GM joints without placement tabs – 3R Saginaw series.
• Ford – measure distance between placement tabs –
x 3-1/4" 1310 series or 3 5/8" 1330 series.
• All 1350 joints are 3 5/8" between tabs with 1-3/16" cup
diameter.

Part No. Description

3" Steel Driveshaft
PST300455 45.25" to 45.75"
PST300465 46.25" to 46.75"
PST300475 47.25" to 47.75"
PST300485 48.25" to 48.75"
PST300495 49.25" to 49.75"
PST300505 50.25" to 50.75"
Part No. Description
PST300515 51.25" to 51.75"
PST100310 1310 Rear Joint
PST300525 52.25" to 52.75"
PST100030 1330 Rear Joint
PST100015 3R Saginaw Rear Joint
PST100050 1350 Rear Joint

Ford C-4 Street

Smart Package
PAMPASS26103
The C-4 Street Smart package includes the C-4 Super Streeter
transmission, an 11" torque converter, Pro Fit bellhousing, locking
filler tube and dipstick, and is guaranteed forever!

Ford AOD Throttle

Pressure Cable
PAMPA53500
A worn or stretched out TV cable will cause shifting problems or
complete transmission failure in 1987-93 Fox Body 5.0 Mustangs.
The new, heavy-duty cable is redesigned for easier installation and
adjustment.
368 2023 - 2024 HOT ROD AND EARLY MUSCLE
21 Circuit Classic Wiring Harness 28-Circuit Classic-Plus
This most widely used Wiring Harness
customizable chassis harness Versatile enough
adapts to almost any vehicle. to adapt to most
This kit comes with as well as vehicles, this kit
without a preterminated includes most
GM column-mounted all the power
ignition switch accessory circuits needed for your vehicle. Includes with
connector. Included the harness is a GM-engineered fuse block and Painless
with the harness is a mounting bracket, GM turn signal connectors, pre wired
GM-engineered fuse plugs for the headlights and dimmer switch, and each
block and Painless mounting bracket, GM turn signal wire is printed with the circuit identification as well as
connectors, pre-wired plugs for the headlights and using GM color codes.
dimmer switch, and each wire is printed with the circuit Includes circuits for:
identification as well as using GM color codes. Includes
circuits for: • Air Conditioning/Heat • Electric Choke
• Accessory • Electric Fuel Pump
• Air Conditioning/Heat • Headlights • Accessory/Cigarette • Emergency Flashers
• Accessory/Cigarette • Horn Relay Lighter • Fan Relay Power Source
Lighter • Ignition Coil • Accessory/Trunk Light • Fused Power Source
• Backup Lights • Instrument Panel • Backup Lights • Headlights
• Brake Lights • Parking Lights • Brake Lights • Horn Relay
• Charging • Radio/Clock • Charging • Ignition Coil
• Dome Light • Starting • Cruise Control • Instrument Panel
• Electric Choke • Tail Lights • Dome Light
• Emergency Flashers • Third Brake Light Part No. Description
• Fan Relay Power Source • Turn Signals PWI10201 GM Keyed Column Harness
• Fused Power Source • Wipers PWI10202 Non-GM Keyed Column Harness
PWI10204 Pickup Chassis GM Keyed Column Harness
Part No. Description
PWI10101 GM Keyed Column Harness
PWI10102 Non-GM Keyed Column Harness
Pro Series Harness Kits
PWI10104 Pickup Chassis Keyed Column Harness The Painless 23- and
25-circuit Pro Series
12-Circuit Fuse Block harness kits provide
everything needed
PWI30001 to properly wire any
Use in addition to existing wiring, or as custom vehicle.
a starting point for a custom harness. Manufactured with
Block includes fuses, flashers, horn over 25 GM factory-
relay, terminals, anti-theft feature, style connectors used
and instructions. Pre-wired for the on most 60’s to early '90’s GM switches, making the Pro
following circuits: Series harness kit a direct fit for the project vehicle.
• Turn Signals • Horn Other important features include LED ATC-bladed fuses
• Air Conditioning/Heat • Radio which light-up when blown, 6-gauge charge wire with
• Emergency Flashers • Wipers midi-fuse to handle today's high-amperage alternators,
• Brake Lights • Headlights and front/rear grounding harnesses ensuring a well-
• Coil (Anti-Theft) • Electric Fan grounded system. Many GM connectors, insulated and
• Dome Light • Instruments non-insulated butt splices, heat shrink, grommets, cable
ties, ground straps, and cable tie clips are also included
18-Circuit Fuse Panel to make the installation as simple as possible. Kits are
available with either a grommet-style firewall pass-
PWI30003 through or GM bulkhead-style firewall pass-through.
Same as PWI30001 with extra circuits for
power windows, door locks, and other Part No Description
23-Circuit Pro Series Kits
optional accessories.
PWI10401 GM Keyed Column, Grommet Firewall Pass-Through
PWI10402 Key In Dash, Grommet Firewall Pass-Through
PWI10403 GM Keyed Column, Bulkhead Firewall Pass-Through
CirKit Boss PWI10404 Key In Dash, Bulkhead Firewall Pass-Through
Add extra circuits to an existing PWI10405 Truck Kit, GM Keyed Column, Bulkhead Firewall Pass-Through
PWI10406 Truck Kit, Key In Dash, Bulkhead Firewall Pass-Through
wiring system without overloading
25-Circuit Pro Series Kits
the wiring or the ignition switch. PWI10411 GM Keyed Column, Grommet Firewall Pass-Through
Choose a 3-circuit or a 7-circuit kit. PWI10412 Key In Dash, Grommet Firewall Pass-Through
Part No. Description PWI10413 GM Keyed Column, Bulkhead Firewall Pass-Through
PWI70114 3-Circuit High-Amp CirKit Boss PWI10414 Key In Dash, Bulkhead Firewall Pass-Through
PWI70118 7-Circuit High-Amp CirKit Boss PWI10415 Truck Kit, GM Keyed Column, Bulkhead Firewall Pass-Through

2023 - 2024 HOT ROD AND EARLY MUSCLE 369

Fuel Injection Wiring Harness Fan-Thom II Electric Fan Relay
Run the factory engine management with Thermostat Protection
computer and save a bunch
Don’t want to probe your radiator?
of hassles. Color-coded,
The Fan-Thom II comes with a
labeled harness provides an
threaded thermostat that screws
easy installation. Extra-length
into the engine block or manifold for
harnesses have a total of eight
a professional installation. Thermostat
feet of wire as measured from
thread size: 3/8”-18 NPT fitting.
the rear of the engine to the computer
connector. Part No. Description
PWI30102 Relay Turns Fan On at 200°F, Off at 185°F
Part No. Application PWI30103 Relay Turns Fan On at 185°F, Off at 170°F
PWI60101 GM TBI 4.3L, 5.0L, 5.7L, 7.4L, 1986-93 Replacement Fan Thermostat Switches
PWI60102 GM TPI 5.0L and 5.7L, 1985-89 PWI30110 3/8"NPT Fan Switch, On at 200°F, Off at 185°F
PWI60103 GM TPI 5.0L and 5.7L, 1990-92 PWI30111 3/8"NPT Fan Switch, On at 185°F, Off at 170°F
GM Vortec V8 4.8, 5.3, 6.0L, 1999-Later Mechanical
PWI60217
Throttle Body
GM Vortech V-8, 4.8L, 5.3L, 6.0L, 2003-2006, Throttle by Wire, A/C-Activated Cooling Fan Relay
PWI60221
Uses Factory ECM (Will Support Flex Fuel Engines) Fan will activate when the engine
PWI60502 GM LT-1, 1992-97 reaches the preset temperature,
PWI60505 GM LT-1, 1992-97 (Extra Length Harness) or when the A/C comes on.
PWI60508 GM LS1, 1999-02, Mechanical Throttle Two thermostats are available,
PWI60510 Ford 5.0L V8, 1986-95
200°/180°F and 185°/170°F.
Part No. Application
Vehicle Speed Sensors PWI30114 A/C Activated Fan Relay, 200°/180°F
PWI60116 PWI30115 A/C Activated Fan Relay, 185°/170°F
4-pulse speed sensor for late GM TPI
and LT-1 systems backed by TH350, TH400, or 700R-4 Dual Fan/Dual Activation Relay Kits
transmission. Dual activation fan turns on when the proper temperature
is reached, or any time the air
Neutral Safety/Backup Light Kit conditioning is on, regardless of
engine temperature, to protect
PWI80175 the A/C system. Proper airflow
For use with GM TH350, TH400 and through the condenser is critical
700R-4 transmissions. to proper air conditioning
operation. Three kits are available.
Universal Gauge Harness Part No. Description
PWI30116 Dual Activation, Dual Fan Kit, On at 195°F, Off at 185°F
PWI30302 PWI30117 Dual Activation, Dual Fan Kit, On at 185°F, Off at 175°F
Keep the area under the dash PWI30118 GM LS & Gen III Relay Kit, On at 205°F, Off at 195°F
organized and make occasional
gauge removal an easy process. GM GEN III LS Engine Fan
Harnesses connect to all popular
gauges and work with most dash layouts. Universal Relay Kits
Gauge Harness For Electric Speedometer (With Kits include a thermostat that
Speedometer Connections) turns on at 205°F and off at 190°F.
Part No. Description
700R-4 Converter Harness Kit PWI30106
PWI30127
Fan Relay Kit
Waterproof Fan Relay Kit,
PWI60109
Install a 700R-4 transmission LS Engine Coil
in a car not wired for a lock-up Extension
converter, enabling converter
to function properly. Includes Harness
fourth gear oil pressure switch, PWI60127
lock-up solenoid, vacuum Includes two 24"pigtails to allow relocating coils
switch, brake switch, transmission pan gasket, wiring off the valve covers.Factory color-coded wires and
harness, and instructions. weatherproof connectors. One driver's side, one
passenger side pigtail.
Adjustable Electric Fan Thermostat Kit
PWI30104 Electric Fan 30-Amp
Adjust the thermostat with the twist of a Relay Kit
knob. Versatile sensor can function as a
probe or be mounted to the radiator. Includes
PWI30101
thermostat with bracket, 30-amp relay, 30- Protect the electric fan and
amp circuit breaker, wiring, terminals, and electrical system. Includes 30-
mounting hardware. amp circuit breaker, heavy-duty relay, wiring harness,
and terminals.
370 2023 - 2024 HOT ROD AND EARLY MUSCLE
Electric Fan 70-Amp Relay Kit Ultra High-Amp Alternator
PWI30100 Kit (140-190 amps)
Kit is ideal for use with high- PWI30700
amperage fans or in dual cooling fan In most cases, your factory
applications. 70-amp relay protects wiring or even a Painless
the electrical system from voltage spikes and prevents Performance chassis harness is
the fan from feeding back through the system. only rated for an alternator with
80 amps or less. Connecting
DuraSpark II Harness your new high-amperage alternator using too small a
charge wire will lead to inadequate charging and/or over
PWI30812 heating of the charge wire, possibly leading to a fire.
Easily convert Ford points ignitions The Ultra High Output Alternator Kit will let you safely,
to DuraSpark II electronic system with this reliably, and “Painlessly” install an alternator with up to
harness. Requires DuraSpark II distributor and yellow 190 charging Amps. The kit includes a high-amp inline
or blue ignition module. fuse with protected fuse holder, all necessary ring
terminals, heat shrink, and a detailed set of diagrams
Universal Fuel Pump Relay and step by step instructions to provide a professional
PWI50102 installation.
A relay will prevent voltage drops at
the electric fuel pump to maintain High-Amp Alternator
constant pressure and prevent amperage overloads from Shutdown Relay
damaging the electrical system. It's a good idea to relay
fuel pump for the street or in racing situations. PWI50105
This kit has a 250-amp solenoid and
will handle alternator feedback from
30-Amp Single-Pole/Single-Throw Relay the highest amperage alternators. Eliminates engine
PWI80130 run-on when the master disconnect is turned off. Easy to
Replacement relay for use with CirKit boss, horn install with all hardware and instructions.
relay, or fan relay kits.
Ceramic Voltage Reducer
Relay Base Port PWI40027
PWI80133 If an engine with 12-volt starter and
The same high-impact ABS plastic relay base ignition has been swapped into a
used on all Painless products. Terminals are car with a 6-volt system, the voltage
provided. reducer will allow accessories like the original heater
and radio to be retained. The reducer carries a 4-amp
maximum current, but can be run in parallel to increase
LED No-Load Flasher load capacity. Will not work with gauges.
PWI80230
LED bulbs do not draw enough power to Courtesy Light Kit
activate a flasher. The LED no-load flasher
solves this problem, and turn signals PWI30702
operate as expected. Kit includes GM door switches,
wires, and light sockets to
install courtesy lights inside
Remote Master Disconnect Switch the vehicle.
PWI30204
Kit uses a small toggle switch to activate a Universal Courtesy Light Kit
250-amp continuous-duty solenoid. It can also
be easily hidden for security purposes. Solenoid PWI30710
mounts anywhere along the positive battery Kit Includes wires and light
cable run. Kit includes toggle, solenoid, sockets to install courtesy
wiring, switch fuse, battery cable lights inside your vehicle.
terminals, and mounting hardware.
Universal Convertible
Delco Alternator Pigtail Top Wiring Harness Kit
PWI30706 PWI30730
A replacement pigtail with original plug Kit includes high-grade 12-gauge
for the DelcoTron alternator. It's pre- TXL wiring to complete the circuit
terminated with an ignition input wire from the battery to the included
and the voltage sensing wire. circuit breaker, then to the factory switch and on to the
existing hydraulic convertible top motor.

2023 - 2024 HOT ROD AND EARLY MUSCLE 371

GM Steering Column and Dimmer Switch GM Pickup • Blazer • Suburban
Pigtail Kit Headlight Socket/Pigtail Kits
PWI30805
Original factory connectors replace
worn out or damaged ones on early
GM keyed columns. Wires are GM color-coded.

Early GM Column PWI30350 PWI30353

Conversion Kit Kits include all terminals and connections required to
wire GM pickups, Blazers, and Suburban exterior lighting.
PWI30806
Includes two ignition switch Part No. Application
1973-80 GM Pickup/Blazer/Suburban
connectors, two turn signal connectors, and one dimmer
PWI30350 Single Round Headlights
switch connector plus terminals for each one.
1980-87 GM Pickup/Blazer/Suburban
PWI30351 Single Square Headlights
Universal Ignition Switch PWI30352 Dual Square Headlights
PWI80153 1988-91 Suburban or Suburban Front End Swap
Dash-mounted ignition switch with two keys. PWI30353 Dual Square Headlights

GM Style Jamb Switch Hydraulic

PWI80170 Brake Light Switch
PWI80171
Momentary Start Switch 1/8"NPT fitting.
PWI80528
Push-button start switch for extreme
Push Button
conditions. Brake Light Switch
PWI80172
Headlight Switch
with Aluminum Knob Low-Pressure
PWI80151 Brake Switch
Three-positions: dash light, dim, no PWI80174
dome light control. Includes plug-in pigtail. Threads are 1/8"NPT.

Replacement Switch Kit Universal Windshield Wiper Switch

PWI80120 PWI80173
Three-position headlight switch, a Three-position switch with on-off and
floor-mounted dimmer, and two GM- windshield washer functions.
style grounding door jamb switches.
Replacement Rocker Switches
Headlight Switch with GM-Style Control special lighting applications with a sleek looking
Black Knob rocker switch.
PWI80152 Part No. Description
PWI80401 On/Off, Red Light
Three position; dash light, dim and dome
PWI80402 On/Off, Momentary On, Green Light
light control.
PWI80403 On/Off/On, Red Light
PWI80405 On/Off, Blue Light
Halogen Headlight Harnesses
The factory headlight wiring in most older Battery Cable Kit
vehicles is not designed to handle
high-power halogen headlights.
PWI40100
Painless headlight harnesses draw Kit includes high-quality 1-gauge
power directly from the battery through battery cable, (fifteen feet of red,
a relay, providing full power to H4 and three feet of black cable)
conversion or halogen sealed-beam with pre-installed terminals,
headlights. side-post adapters, and crimp-
style ring terminals.
Part No. Description
PWI30814 Harness for H-4 Halogen Bulbs 4-headlight system
PWI30815 Harness for H-4 Halogen Bulbs 2-headlight system
Note: PWI30815 is for use on vehicles with a 2-headlight system using dual filament sealed
beams or H-4 headlight conversions.

372 2023 - 2024 HOT ROD AND EARLY MUSCLE

Remote Battery Junction Terminal Kit 1967-68 Camaro/Firebird
PWI40106 24-Circuit Chassis Harness
Positive (red) and negative PWI20101
(black) terminal blocks with 24-circuit harness for
3/8" studs allow connection the 1967-1969 Camaro/
of battery cables through a Firebird uses a 1969-and-
bulkhead. Provides a safe, newer-style bulkhead
convenient connection connector. It includes
point for batteries near the blade fuses and enough
firewall or in the trunk. circuits to wire up just
about any installed
Dash Indicator Lights upgrade to your first generation F-Body. Some minor
Part No. Description bulkhead modifications required. Factory original quick-
PWI80200 1/8" Amber LED connect terminals are included for the in-dash printed
PWI80201 1/8" Red LED circuit board.
PWI80202 1/8" Green LED
PWI80208 1/2" Amber
PWI80209 1/2" Red
26-Circuit Direct Fit Harness
PWI80210 1/2" Green for 1969 Camaros
PWI80211 1/2" Blue
PWI80203 5/16" Amber
PWI10413
PWI80204 5/16" Red Featuring 26 circuits with
PWI80205 5/16" Green virtually every connector
PWI80206 5/16" Blue installed on the
harness out of the box.
This harness covers
all common options
Extreme Condition Wires and even features a
Stranded copper core high-temperature wire with fully integrated ground
cross-linked polyethylene insulation exceeds original circuit. Included
equipment specifications for underhood use. Choose are provisions for the RS headlights and taillights, cowl
from several attractive colors. hood, and even a complete console harness! Installing
Part No. Description the harness is made clear with an included 120+ page
10-Gauge Wire, 25-ft. Rolls manual full of color schematics, photos, and step by-step
PWI70700 Red instructions!
PWI70701 Black
14-Gauge Wire, 50-ft. Rolls
PWI70800 Red 19641/2 to 1966 Mustang Chassis Harness
PWI70801 Black PWI20120
PWI70807 Gray
PWI70812 Purple
Owners and
restorers of
19641/2 to 1966
1970-81 Second Generation Camaro first-generation
26-Circuit Chassis Harness Mustangs can take
26-circuit wiring harness for the second-generation comfort in the
Camaro (1970-81) has fact that there is
all the standard factory now an electrical
components in addition system upgrade from Painless to completely rewire this
to upgrades like a large, classic car. It includes a fully assembled 22-circuit fuse
6-gauge charging wire block, complete with 12 modern blade-type ATO fuses.
for high-amperage
charging systems.
Fully integrated ground
circuit ties all of the
grounds to the battery.
Complete with the
correct connectors for the headlamp switch, wiper
switch, ignition switch, dimmer switch, wiper motor,
gauges, and more. The in-depth, step-by-step 150-
page manual is broken down into three parts: engine
compartment, interior, and tail.
Part No. Description
PWI20112 1970-73 Camaro 26-Circuit Harness
PWI20114 1978-81 Camaro 26-Circuit Harness

2023 - 2024 HOT ROD AND EARLY MUSCLE 373

1967-70 Mustang Chassis Harness Customizable Classic Tri-Five Chevy Chassis
This all-new Harness
harness is a These circuit kits
factory upgrade are designed for the
for 1967-70 Ford 1955-67 “Tri-Five”
Mustangs. The Chevy and include
harness features a additional circuits for
modern 22-circuit power options and
fuse block using accessories. These
ATO blade-type harnesses feature a factory-location Painless mounting
micro fuses. plate for the fuse block, and special dash and turn signal
Following original Ford color codes, the harness is divided connectors.
into five sections to include under-dash, instrument
Part No. Description
panel, engine, and tail sections, and additional circuits
PWI20105 27-Circuit
such as radio, courtesy lights, and tach.
Part No.
PWI20121
Description
1967-68 Mustang 22-Circuit
21-Circuit Customizable Harness
PWI20122 1969-70 Mustang 22-Circuit These 21-circuit
customizable
harnesses have
1969-74 GM Muscle Car Harness many of the factory
PWI10413 connectors already
This 25-circuit installed on the
universal harness, right out of
harness fits the box. Also featured
the following is a 20-amp relay for
1969-74 GM accessories such as fog lights or an electric fuel pump.
Muscle cars: Part No. Description
Camaro/ 1966-76 Ford Galaxie, LTD,
PWI10123
Firebird, Nova, Falcon, Fairlane, Mustang, Maverick, Torino, Ranchero
El Camino, Monte Carlo, Apollo, Chevelle, Cutass, Skylark, 1966-76 Chrysler/Dodge, Barracuda, Imperial,
Tempest, and GTO. The harness features a pre-wired PWI10127 Belvedere, Satellite, Charger, GTX, Dart,
Road Runner, Challenger, Demon, Duster
factory-style bulkhead connector that plugs directly into
the back of the fuse block in the factory location.
Classic-Plus Customizable GM Pickup Harness
21-Circuit Classic Customizable 27/28-Circuit
Muscle Car Harness PWI10206
The GMC/Chevy
PWI20103 harness is designed
This circuit kit is to fit 1967-72 GM
adaptable to fit pickups with 28
the 60s, 70s, or circuits. It features a
80s GM, Ford, or factory-style bulkhead
Chrysler muscle connector and has
cars where a many of the factory
bulkhead connector connectors already installed on the harness. The harness
is required. Some includes the headlight connectors and switch, dimmer
minor bulkhead modification may be required. switch, wiper motor, ignition switch, blower motor and
switch, blower resistor, and instrument cluster. Each wire
28-Circuit Classic-Plus Customizable Muscle is custom printed with the circuit identification as well as
Car Harness using GM color codes for easy installation.
PWI20104
This circuit kit is
Direct Fit 1967-77 Ford F-Series Truck Harness
adaptable to fit 21-Circuit
the 60s, 70s, or PWI10118
80s GM, Ford, or This 21-circuit direct-fit
Chrysler muscle harness uses many of
cars that are the factory connections
equipped with that are already-pre-
power options and terminated. Each wire is
where a bulkhead custom printed with circuit identification as well as color
connector is required. Some minor bulkhead modication coded for easy installation.
may be required.

374 2023 - 2024 HOT ROD AND EARLY MUSCLE

19-Circuit Classic Customizable ClassicBraid
1963-66 GMC/Chevy Pickup Harness Clean up and protect the wiring in your vehicle with this
lightweight cloth-like material. The knitted construction
PWI10112 provides good drainage and superior abrasion resistance,
This 19-circuit 1963- while keeping its rugged smooth texture and appearance.
1966 GMC/Chevy Pickup The covering has a temperature rating from -94°F to
harness has many of 257°F with a 482°F melting point.
the factory connectors
Part No. Description
already installed PWI70956 1/8" Dia., 20 ft.
including the headlight PWI70957 1/4" Dia., 20 ft.
connectors and switch, PWI70958 1/2" Dia., 10 ft.
dimmer switch, brake switch, wiper motor and switch, PWI70959 3/4" Dia., 6 ft.
horn, dash light sockets and bulbs, and warning lights. PWI70960 1" Dia., 12 ft.
Works with single and dual dash turn signal indicators.
Each wire is custom printed with the circuit identification. ClassicBraid Chassis and EFI Kits
Chassis Kit (PWI70970) includes: 20' of 3/16" dia., 30' of
27-Circuit Chassis Wiring Harness Kit 5/16" dia., 30' of 3/8" dia., 30' of 1/2" dia. 10' of 3/4" dia., and
for 1973-87 GM Pickup 6' of 1" dia., heat shrink, tie wraps, and tape.
EFI Kit (PWI70971) includes: 25' of 3/16" dia., 25' of 5/16"
PWI20205 dia., 25' of 3/8" dia., 15' of 1/2" dia. 8' of 3/4" dia., and 8' of 1"
Designed to dia., heat shrink, tie wraps, and tape.
fit C10/C20/ Part No. Description
C30 trucks, PWI70970 Classic Chassis Braid Kit
Blazers, and PWI70971 Classic EFI Braid Kit
Suburbans
featuring a PowerBraid Wire Wrap
factory-style Braided, laterally split black wire wrap closes securely
bulkhead connector, kit allows easy mounting of the fuse around wire and needs no additional taping or fasteners.
block in the OEM location. Each wire is custom printed
Part No. Description
with the circuit identification. Kit includes connectors PWI70910 1/8" Dia., 20 ft. PowerBraid
for the headlight switch, dimmer switch, wiper motor, PWI70901 1/4" Dia., 20 ft. PowerBraid
ignition switch, blower motor & switch, blower resistor, PWI70902 1/2" Dia., 10 ft. PowerBraid
and instrument cluster. Includes circuits for A/C/heat, PWI70903 3/4" Dia., 6 ft. PowerBraid
camper cover light, cigarette lighter, 4x4 switch, backup PWI70916 1" Dia., 12 ft. PowerBraid
lights, brake lights, charging, cruise control, dome light, PWI70904 2" Dia., 4 ft. PowerBraid
electric choke, electric fuel pump, emergency flashers, PWI70921 EFI Harness Kit
fan relay, fused power source, headlights, horn, ignition
coil, instrument panel lighting, park lights, power door PowerBraid Chassis Harness Kit
locks, power windows, radio/clock, starting, tail lights,
third brake light, turn signals, and wipers/washer pump.
PWI70920
Protect and clean up any
harness installation with the
26-Circuit Direct Fit Harness new braided wire wrap. This kit
for 1967-72 Chevelle/Malibu includes 10' of 1/8", 60' of 1/4",
30' of 1/2" and 6' of 1" high-tech
PWI20130 woven loom; 3/8" and 1/2" heat-shrink tubing; 140 cable
1970-72 Chevelle/ ties; and a roll of stretch-and-seal tape. PowerBraid
Malibu, 26-circuit protects the harness from abrasion and wear, plus adds a
harness gives you nice finished look to the installation.
everything you need
and more! Not only are
there provisions for PowerBraid Tools
connecting standard PWI70941
factory components, The easy way to enclose any wiring in
we also provide what PowerBraid (or other standard wire
you will need for loom). Ideal for the professional installer.
aftermarket components. Includes options like a console
sub-harness, a gauge cluster pigtail for the SS and base
model, and an integrated ground circuit. Extra length has Quick Connect Terminal Kits
even been added to even allow the headlight section to be Each kit contains one male and one female connector,
routed behind the driver side inner fender for a cleaner and the appropriate number of quick-
look. Also included is a 130+ page manual full of color connect wire terminals.
schematics, photos, and step-by-step instructions! Part No. Description
PWI40006 2-Wire
PWI40007 3-Wire
PWI40008 4-Wire
PWI40009 6-Wire

2023 - 2024 HOT ROD AND EARLY MUSCLE 375

GM Turn Signal Parts Kit AC/Heat Control Wiring
PWI30840 Harness Kit for 1973-87
Includes all connectors and terminals GM Trucks/SUVs
for an early GM steering column turn
signal switch.
PWI30902
Direct replacement wiring
harness for 1973-87 GM
trucks and SUVs including
C10/C15, Blazer, and Suburban.

Exhaust Products
High in quality and priced affordably. Patriot Exhaust Products have it all. Headers are manufactured from heavy-duty
16-gauge tubing, and available in a plain, raw steel finish or metallic ceramic coated. Headers include gaskets, header bolts,
and collector reducers.

Tight Tuck Headers

Part No. Application Footnotes Tube and Collector Size
Chevy
PEPH8027 265-400 Raw 1, 11, 15, 16, 24 1-5/8", 2-1/2"
PEPH8027-1 265-400 Coated 1, 11, 15, 16, 24 1-5/8", 2-1/2"
PEPH8027-
PEPH8037-1 265-400 Coated 11, 15, 16, 17, 24 1-5/8", 2-1/2" 1
Ford
PEPH8427 289-351W 6, 7, 11, 16 1-5/8", 2-1/2"
PEPH8090 Flathead 11, 16 1-3/4", 2-1/2"
Chrysler
PEPH8205 318-360 11, 15 1-5/8", 2-1/2"

Tri-5 Chevy Headers

Tube and Collector PEPH8025-1
Part No. Application Footnotes Size
PEPH8025 1955-57 Chevy 265-400 Raw 1, 3, 5, 19, 23, 60, 192 1-5/8", 2-1/2"
PEPH8025-1 1955-57 Chevy 265-400 Coated 1, 3, 5, 19, 23, 60, 92, 192 1-5/8", 2-1/2"
PEPH8023 1955-57 Chevy 396-502 Raw 3, 19, 23, 37, 105, 192 1-7/8", 3"
Footnotes:
1 Will not fit angle plug heads.
3 Fits 605 steering box with aftermarket engine mounts and rear transmission cross member.
5 Maximum ground clearance for cars lowered up to 4".
Due to production variations on motor mounts,
6
left mount may have to be ground to provide the proper 1/4" clearance between the motor mount and header collector.
7 Must use Ford short starter for right side collector clearance.
11 Universal for most street rods.
15 Can be used with any oil filter system or transmission and starter combination.
16 Tucks very close to engine.
17 Will fit angle plug heads.
19 Check motor mount position before ordering.
23 Will not fit if engine is located more than 3/4" forward for HEI.
24 Tight tuck headers do not fit 1955-57 Chevys, Camaros or other modern vehicles which have a crossmember below the engine’s center two exhaust ports.
37 Fits standard deck big block only.
60 Will not fit with 168 tooth flywheels or kickout aftermarket starters.
92 Will fit most angle plug heads including factory Chevrolet “Bow-Tie” heads.
105 Original bellhousing frame mounts must be removed.
Header is designed to fit cars using original V8 Pitman arm part number 3719487, not 6 cylinder Pitman arm number 3709877.
192
Aftermarket Pitman arms must be same configuration as OE for proper fit.

376 2023 - 2024 HOT ROD AND EARLY MUSCLE

Headers
Built with surface-machined thick steel flanges and mandrel-bent mild steel tubing.
Available raw or with metallic ceramic coating which is easy to keep clean, resists rust and
corrosion, and will not discolor. Complete with installation hardware, collector reducers,
gaskets, and instructions.
Metallic Auto Trans Std Trans
Ceramic Tube Collector Port
Years Engines Uncoated Coated Footnotes AC PB PS Column Floor Column Floor Size Size Shape
Chevrolet
Camaro
1967-81 265-400 PEPH8021 PEPH8021-1 5, 17, 52, 61, 96, 202 Y Y Y Y Y N N 1-5/8" 3" RD
1967-81 265-400 PEPH8047 PEPH8047-1 36, 61, 92, 93, 96, 202 Y Y Y Y Y N Y 1-5/8" 3" OVL
1967-81 396-502 PEPH8012 PEPH8012-1 5, 52, 53, 54, 69, 202 Y Y Y N Y N Y 1-3/4" 3" SAP
1970-72 396-502 — PEPH8024-1 54, 69 Y Y Y N Y N Y 1-7/8" 3-1/2" SAP
1970-72 396-502 PEPH8026 PEPH8026-1 54, 69 Y Y Y N Y N Y 2" 3-1/2" SAP
Chevelle, Malibu, El Camino
1964-87 265-400 PEPH8021 PEPH8021-1 5, 17, 52, 96 Y Y Y Y Y N N 1-5/8" 3" RD
1964-87 265-400 PEPH8047 PEPH8047-1 36, 92, 93, 96 Y Y Y Y Y N Y 1-5/8" 3" OVL
1968-74 396-502 PEPH8026 PEPH8026-1 69 Y Y Y Y Y N Y 2" 3-1/2" SAP
1968-77 396-502 PEPH8012 — 5, 52, 53, 54, 69 Y Y Y N Y N Y 1-3/4" 3" SAP
1968-77 396-502 — PEPH8013-1 5, 52, 53, 54, 69 Y Y Y N Y N Y 1-7/8" 3" SAP
Corvette
1955-82 265-400 PEPH8025 PEPH8025-1 1, 5, 60, 96 Y Y Y Y Y N Y 1-5/8" 2-1/2" RD
1970-87 265-400 PEPH8021 PEPH8021-1 5, 17, 52, 96 Y Y Y Y Y N N 1-5/8" 3" RD
1970-87 265-400 PEPH8047 PEPH8047-1 36, 92, 93, 96 Y Y Y Y Y N Y 1-5/8" 3" OVL
1970-74 396-502 — PEPH8024-1 69 Y Y Y Y Y N N 1-7/8" 3-1/2" SAP
1970-74 396-502 PEPH8026 PEPH8026-1 69 Y Y Y Y Y N N 2" 3-1/2" SAP
1970-77 396-502 PEPH8012 PEPH8012-1 5, 52, 53, 54, 69 Y Y Y N Y N Y 1-3/4" 3" SAP
1970-77 396-502 — PEPH8013-1 5, 52, 53, 54, 69 Y Y Y N Y N Y 1-7/8" 3" SAP
Nova
1968-79 265-400 PEPH8021 PEPH8021-1 5, 17, 52, 96 Y Y Y Y Y N N 1-5/8" 3" RD
1968-79 265-400 PEPH8047 PEPH8047-1 36, 92, 93, 96 Y Y Y Y Y N N 1-5/8" 3" OVL
1968-79 396-502 PEPH8012 PEPH8012-1 5, 52, 53, 54, 69 Y Y Y N Y N Y 1-3/4" 3" SAP
1968-79 396-502 — PEPH8013-1 5, 52, 53, 54, 69 Y Y Y N Y N Y 1-7/8" 3" SAP
Passenger Car, Wagon and Nomad
1955-57 265-400 PEPH8025 PEPH8025-1 1, 3, 5,19, 23, 60, 192 Y Y Y Y Y N Y 1-5/8" 2-1/2" RD
1965-89 265-400 PEPH8047 PEPH8047-1 92, 93 , 96 Y Y Y Y Y N Y 1-5/8" 3" OVL
1971-94 265-400 PEPH8021 PEPH8021-1 5, 17, 52, 96 Y Y Y Y Y N N 1-5/8" 3" RD
1955-57 396-502 PEPH8023 — 3, 19, 23, 37, 105, 192 Y Y Y Y Y N N 1-7/8" 3" SAP
1955-57 396-502 PEPH8035 — 4, 13, 14, 15, 19 Y Y Y Y Y N Y 2" 3-1/2" SAP
1965-70 396-502 — PEPH8062-1 69 Y Y Y Y Y Y Y 2" 3-1/2" SAP
1965-74 396-502 PEPH8012 PEPH8012-1 5, 52, 53, 54, 69 Y Y Y N Y N Y 1-3/4" 3" SAP
1965-74 396-502 — PEPH8013-1 5, 52, 53, 54, 69 Y Y Y N Y N Y 1-7/8" 3" SAP
1971-74 396-502 — PEPH8024-1 49, 69 Y Y Y Y N N N 1-7/8" 3-1/2" SAP
1971-74 396-502 PEPH8026 PEPH8026-1 49, 69 Y Y Y Y N N N 2" 3-1/2" SAP
Dodge/Plymouth
Chrysler Cordoba
1975 400 — PEPH8207-1 203 Y Y Y N Y N N 1-7/8" 3" SAP
Ford/Mercury
Mustang/Cougar
260-
1964-73 PEPH8433 PEPH8433-1 5, 196, 197 Y Y Y Y Y N Y 1-1/2" -1-3/4" 2-1/2" OVL
302W

Footnotes: 60 Will not fit with 168-tooth flywheels or kickout aftermarket starters.
1 Does not fit angle plug hHeads. 61 Does not fit 1967-69 Camaro with A/C.
Fits with stock or 605 steering boxes, aftermarket side engine mounts, Big block frame stands and motor mounts must be used to ensure
3 69
and rear trans cross member. proper engine location and header fit.
4 Fenderwell exit. Will fit most angle plug heads including factory Chevrolet “Bow-Tie”
92
5 Shorty design for maximum ground clearance. heads.
13 May require smaller front tires to avoid contact. Requires removal or modification of locking steering columns if
93
14 1937-57 Chevy applications require alteration of emergency brake rod. equipped.
17 Fits most angle plug heads. Installation requires left side A/C bracket PEPH7608.1979 and later
96
19 Check motor mount position before ordering. vehicles with short compressors can use the stock bracket.
Will not fit if engine is locatedmore than 3/4" forward for HEI firewall 196 Lakewood bellhousing requires clearancing for header tubes.
23 clearance. Fits with TCI engine mount kit Part No. 725-7005-80 and with Use C52216a052e "export brace" if shock mount centers less
197
the equivalent Danchuk mounts. than 33-3/4".
36 Fits D-port cylinder heads including ZZ4 Crate Engines. Will fit Detroit Speed & Engineering front subframes with
202
49 Fits 1971-74 passenger cars and wagons with auto trans column shift only. rack and pinion steering.
52 Will not fit Saginaw close ratio with 825 power steering box. 203 Will not fit models with air injection pump (modifications required).
Not recommended for Generation Six 502 CID engines with 214 Must use non-shell type motor mounts.
53
aluminum heads.
54 Fits with manual and auto trans floor shifts only.

2023 - 2024 HOT ROD AND EARLY MUSCLE 377

Low-Line Lake Pipes “Smithy's” Mufflers
Recapture the spirit of the fifties With nostalgia rides becoming so
with classic chrome plated popular, it's only right that they sound like
Lake pipes. they did years ago. Double end-cap construction
with 3-1/2" diameter hammertone finished case assures
PEPH1283 the original “Smithy's” look.
PEPHPC200 Part No. Inlet Dia. Core Dia. Case Length Case Dia.
PEPH3010 2" 1-3/4" 22" 3 1/2"
PEPH3012 2" 1-3/4" 30" 3 1/2"
Inlet/Outlet
Part No. Description Diameter Length PEPH3013 2-1/4" 2-1/4" 22" 3 1/2"
PEPH1283 Single Outlet Lake Pipes 2" In/2" Out 80" PEPH3015 2-1/4" 2-1/4" 30" 3 1/2"
PEPH1284 Triple Outlet Lake Pipes 2" In/2" Out 80" PEPH3016 2-1/2" 2-1/2" 22" 3 1/2"
PEPHPC200 Mounting Clamp for Lake Pipes, 2" Diameter PEPH3017 2-1/2" 2-1/2" 26" 3 1/2"

Mild Steel Exhaust Tubing Exhaust Components

Leg 304 Stainless Steel Tubing
Part No. Tube O.D. Radius Length
U-Bends and Bends
PEPH7007 1-1/2" 16 Gauge 2" 6"-6" Tube
PEPH7010 1-1/2" 18 Gauge 2" 6"-6" Part No. O.D. Radius Leg Length
PEPH7015 1-5/8" 16 Gauge 2-1/2" 6"-6" 45° Bends
PEPH7016 1-5/8" 18 Gauge 2-1/2" 6"-6" PEPH6951 2-1/2" 4" 6"-6"
PEPH7023 1-3/4" 18 Gauge 2-1/2" 6"-6" 90° Bends
PEPH7024 1-3/4" 18 Gauge 3" 6"-6" PEPH6954 2-1/2" 4" 6"-6"
PEPH7068 1-3/4" 16 Gauge 6" 12"-12" PEPH6955 3" 6" 6"-6"
PEPH7030 1-7/8" 18 Gauge 3" 6"-6" U-Bends
PEPH7037 2" 18 Gauge 3" 6"-6" PEPH6938 2-1/2" 4" 6"-6"
PEPH7064 2" 16 Gauge 6" 12"-12" PEPH6942 3" 6" 6"-6"
PEPH7046 2-1/8" 16 Gauge 3-1/2" 6"-6"
PEPH7050 2-1/4" 16 Gauge 4" 6"-6" Tubing
PEPH7052 2-1/4" 16 Gauge 6" 12"-12"
PEPH7055 2-1/2" 16 Gauge 4" 6"-6"
PEPH7057 2-1/2" 16 Gauge 5" 12"-12" Each length of tubing is 5 feet long.
PEPH7056 2-1/2" 16 Gauge 6" 6"-6" Part No. Tube O.D. Gauge
PEPH7060 3" 16 Gauge 6" 6"-6" Mild Steel Tubing
PEPH7065 3-1/2" 16 Gauge 7" 6"-6" PEPH7756 2" 18
PEPH7066 4" 16 Gauge 7" 6"-6" PEPH7757 2" 16
J-Bends PEPH7760 2-1/4" 18
PEPH7008 1-1/2" 16 Gauge 2" 6"-15" PEPH7761 2-1/4" 16
PEPH7013 1-1/2" 18 Gauge 2" 6"-15" PEPH7762 2-1/2" 18
PEPH7019 1-5/8" 16 Gauge 2" 6"-15" PEPH7763 2-1/2" 16
PEPH7018 1-5/8" 18 Gauge 2" 6"-15" PEPH7764 3" 18
PEPH7021 1-3/4" 16 Gauge 2" 6"-15" PEPH7765 3" 16
PEPH7020 1-3/4" 18 Gauge 2" 6"-15" PEPH7767 3-1/2" 16
PEPH7022 1-3/4" 18 Gauge 2-1/2" 6"-15" PEPH7768 4" 16
PEPH7032 1-7/8" 16 Gauge 2-1/2" 6"-15" 304 Stainless Steel Straight Tubing
PEPH7028 1-7/8" 18 Gauge 2-1/2" 6"-15" PEPH7715 2-1/2" 16
PEPH7029 1-7/8" 18 Gauge 3" 6"-15" PEPH7717 3" 16
PEPH7042 2" 16 Gauge 3" 6"-15"
PEPH7036 2" 18 Gauge 3" 6"-15"
PEPH7041 2" 18 Gauge 4" 6"-15"
PEPH7044 2-1/8" 16 Gauge 3" 6"-15"
Collector Flanges
PEPH7043 2-1/8" 18 Gauge 3" 6"-15" Sold in pairs.
PEPH7048 2-1/8" 16 Gauge 4" 6"-15" Part No. Description
PEPH7053 2-1/4" 16 Gauge 3-1/2" 6"-15" PEPH7258 3-Bolt 2" Diameter Collector Ring
PEPH7049 2-1/4" 18 Gauge 3-1/2" 6"-15" PEPH7259 3-Bolt 2-1/2" Diameter Collector Ring
PEPH7059 2-1/2" 16 Gauge 3" 6"-15" PEPH7260 3-Bolt 3" Diameter Collector Ring
PEPH7054 2-1/2" 18 Gauge 3" 6"-15" PEPH7261 3-Bolt 3-1/2" Diameter Collector Ring
PEPH7058 2-1/2" 16 Gauge 4" 6"-15"
Universal Grommets
Header Flanges To be used as an isolator bushing
Sold in pairs. PEPH7864
when mounting exhaust from a
Part No. Description bracket. Keeps vibrations to a
PEPH7864 Small Block Chevy Header Flanges for 1-5/8" Tube minimum.
PEPH7894 Small Block Chevy Header Flanges for 1-3/4" Tube
Part No. Description
PEPH7899 Big Block Chevy Header Flanges for 2" Tube PEPH7240 Universal Male Style Grommet
PEPH7870 Ford 289-351W Header Flanges for 1-3/4" Tube PEPH7241 Universal Female Style Grommet
PEPH7842 Ford 289-351W Header Flanges for 1-1/2" Tube
PEPH7871 Ford 429-460 Header Flanges for 2" Tube

378 2023 - 2024 HOT ROD AND EARLY MUSCLE

Collector Reducers Electric Exhaust
Sold in pairs. Cut-Outs
With stainless steel construction and easy bolt-on
Part No. Description installation, Patriot Exhaust electric cut-outs allow
PEPH7248 2-1/2" Inlet, 2" Outlet Collector, 1-3/4" Long maximum performance and convenience. The compact
PEPH7250 2-1/2" Inlet, 2" Outlet Collector, 5" Long design with leak-free butterfly valve allows for use on a
PEPH7242 2-1/2" Inlet, 2-1/2" Outlet Collector, 5" Long
broad range of applications, including lowered vehicles.
PEPH7251 3" Inlet, 2-1/4" Outlet Collector, 5" Long
PEPH7243 3" Inlet, 2-1/2" Outlet Collector, 5" Long
Available in 2-1/2" or 3" diameters, for single or dual
PEPH7244 3" Inlet, 3" Outlet Collector, 5" Long
exhaust systems.
PEPH7252 3-1/2" Inlet, 2-1/2" Outlet Collector, 5" Long
Part No. Description
PEPH7245 3-1/2" Inlet, 3" Outlet Collector, 5" Long
PEPPEC250K Dual 2-1/2" Electric Cut-Out with Remote
PEPH7246 3-1/2" Inlet, 3-1/2" Outlet Collector, 5" Long
PEPPEC250K-1 Single 2-1/2" Electric Cut-Out with Remote
PEPPEC300K Dual 3" Electric Cut-Out with Remote
PEPPEC300K-1 Single 3" Electric Cut-Out with Remote

MaxProHD Secret Weapon Combo Kit V12 Reverse Brake

PHS2001HD-B and Clutch Bleeder
Everything required to test PHS2003-B
and bleed brakes. All-in- The V12 reverse brake
one kit includes the MaxPro bleeding system is
reverse brake and clutch designed for light-duty
bleeder, BrakeStrip brake professional use. Reverse brake bleeder is manufactured
fluid test with 100 test strips from Zytel nylon that is virtually as strong as steel.
and BrakeFree, the specialty Rebuildable unit offers a virtual lifetime of use. Sold
tool that removes stuck bleeder complete with required tubing, adapters, and users
screws. manual.

MaxProHD Reverse Brake BrakeStrip

and Clutch Bleeder PHS3001-B
PHS2002HD-B Test brake fluid quickly and effectively,
New and improved, the MaxProHD ensuring safety and preventing
Reverse Brake Bleeder allows troublesome brake system problems before
performing one-person brake they begin. Innovative, easy-to-use kit
services. System functions by allows testing for fluid contamination in just
removing trapped air in the brake 60 seconds. Includes (100) test strips.
system by pushing it up and out the
master cylinder for a firm pedal. Die- Brake Fluid Test Kit
cast steel and aluminum bodied unit
features an improved check valve system and spring
PHS3006-B
tension adjustment, while optimized hydraulic ratios Specialty kit includes
provide smooth operation with minimal hand force. Sold (100) BrakeStrip strips
complete with required tubing, adapters, and user's and (100) color rating
manual. cards to provide a quick
yet effective means of
accurate testing brake
V5 DIY Reverse Brake and Clutch Bleeder fluid. Kit helps prevent brake problems before they arise,
PHS2104-B while preventing costly brake system issues.
Economical and powerful reverse
brake bleeding system is designed
for the do-it-yourselfer. Compact
system performs all standard
bleeding operations. Sold complete
with required tubing, adapters, and
user's manual.

2023 - 2024 HOT ROD AND EARLY MUSCLE 379

High-Performance Wiring Systems and Accessories
Electric Fans Thermal switch
Ideal for use as primary coolingfan, and thermal sensor
these reversible "push/pull" fans systems include all
mount on either side of the radiator, components for single
making them perfect for engine fan installation: 185°F
swaps. Includes patented nylon automatic thermal
mounting system. Wiring kits with switch, (two different styles)
automatic thermal switch sold insulated wire, wire connectors, fuse
separately. block power taps, and in-line fuse holder with 30-amp
fuse. Includes illustrated instructions with wiring
Part No. Description
12" Electric Fan, 12-1/2" x 12-1/2" x 3-3/4"
diagrams for single and dual fan installations. Dual
PRM19112
RPM 2100, Amp Draw 10.0, 3300 CFM fans require a 30-amp relay, part number 18902, sold
14" Electric Fan, 14" x 14" x 3-3/4" separately.
PRM19114
RPM 1900, Amp Draw 11.0, 2950 CFM Wiring System PRM19001
PRM19115
16" Electric Fan, 16" x 16" x 3 3/4" 185°F thermal switch with tie-wrap mount. 15-amp max
RPM 1800, Amp Draw 11.0, 2950 CFM rating.
18" Electric Fan, 17-3/4" x 17-3/4" x 3-3/4" 30-Amp A/C Relay PRM19002
PRM19117
RPM 1650, Amp Draw 10.5, 2900 CFM
30-amp air conditioning relay activates electric fan when
air conditioning is turned on.
Standard Electric Fans
All electric fans require a 30-
amp fuse for start-up protection.
Adjustable Wiring Systems
Reversible "push/pull" fans can Adjustable wiring
mount on either side of the radiator, systems include all
perfect for use as auxiliary cooling of the components
fans. Includes patented nylon for single fan
mounting system. Wiring kits with installation.
automatic thermal switch sold 170°F–210°F
separately. adjustable thermal
switch module with
Part No. Description
unique silicon chip
8" Electric Fan,
PRM19128
8-1/4" x 8" x 2-1/4", Amp Draw 4.0, 2400 CFM temperature sensor ensures accurate temperature
10" Electric Fan, readings to within ±1°F. Pre-wired module wiring
PRM19120
11" x 10" x 2-1/4", Amp Draw 4.7, 2350 CFM harness, fuse block power taps, in-line fuse holder with
PRM19122
12" Electric, Fan 30-amp fuse, wiring diagrams for single and dual fan
13-3/4" x 12-1/2" x 2 1/2", Amp Draw 8.0, 2300 CFM applications, and illustrated instructions are included.
14" Electric Fan, Dual fans require an additional relay, part number 18902,
PRM19124
5-1/2" x 14" x 3-3/4", Amp Draw 9.8, 2450 CFM
sold separately. 21-amp maximum rating.
16" Electric Fan,
PRM19126
17" x 16" x 3-3/4", Amp Draw 11.0, 2350 CFM Adjustable Wiring System PRM18905
Probe-type temperature sensor locates between the
radiator fins.
Metal Fan Mounting System Adjustable Wiring System PRM18907
PRM104 Includes threaded thermal sensor with 3/8"male pipe
Contains four 10" galvanized steel threads and 1/2" male pipe thread bushing.
universal mounting brackets and
mounting hardware. Ideal for Power Steering and
positive mounting.
Fuel Cooler Systems
PRM997
Prevents premature
power steering pump
failure. Ideal for circle
track, off road, sprint
car, and road racing
steering systems.
Applications also include RVs and 4WD vehicles. Cools
fuel for better engine performance. Lowers fuel density
and prevents vapor lock. Coils are flushable. Two-pass
system, coil size: 1-1/2" x 2-1/2" x 12".

380 2023 - 2024 HOT ROD AND EARLY MUSCLE

 PRM13215

Thin Line Transmission Cooler Kits Maxi-CoolTM Junior

Transmission Coolers
Similar to the Maxi-Cool, but
with a more compact design, and equipped with -6AN
male fittings. Available in 6-pass model with 8” 2400 CFM
electric fan, or in 8-pass model with 10” 2350 CFM electric
fan.
Part No. Description
6-Pass Cooler/Electric Fan Module, with 8" Electric Fan
PRM13215 Module, 2400 CFM, Unit Size; 3" 7 1/2" x 15 1/2"
with -6 AN Male Fittings

In-Line Thermoswitch -6AN Style

PRM18899
For use with Max-CoolTM Junior coolers with -6AN
fittings, this relay automatically activates a 12V electric
fan at 185°F and turns it off at 165°F.
Kits improve performance and extend transmission life. Able to handle up to 15-amp fans, it
Lightweight, compact, 3/4" thick coolers are perfect eliminates a separate 12V relay.
for limited space. Cooler kits include fluid hose and
installation hardware. 11/32" barb fittings. Transmission Fluid
Part No. Description and Engine Oil Thermostats
Standard Transmission Coolers,
11/32" Multi-Barb Fittings Thermostats automatically regulate oil or fluid
PRM1011 14,000-16,000 GVW, 5" x 15-1/2" temperatures to provide quicker warm-
PRM1060
ups to operating temperature, and prevent
Competition Transmission Coolers,
-6AN Male Fittings over-cooling in cold climates. For use with
PRM1024 22,000-24,000 GVW, 10" x 15-1/2" transmission or engine coolers, thermostat
Transmission Cooler Installation Accessories helps improve powertrain efficiency and
Metal Mounting Kit, Includes fuel mileage.
PRM104
Two Zinc-Plated Steel Mounting Brackets and Hardware
Thin Line Trans Coil Only Part No. Description
12,000-14,000 GVW, 3/4" x 5" 12 1/2", PRM1060 Transmission Fluid Thermostat with 3/8" NPT Ports
PRM1020 PRM1070 Engine Oil Thermostat with 1/2" NPT Ports
Cooler Coil with -6 AN Male Fittings
14,000-16,000 GVW, 3/4" x 5" 15 1/2",
PRM1021
Cooler Coil with -6 AN Male fittings Engine Oil Cooler Systems
22,000-24,000 GVW, 3/4" x 10" 15 1/2", Engine oil cooler systems fit engines with the following
PRM1024
Cooler Coil with -6 AN Male fittings
spin-on filter thread sizes: 3/4"-16, 13/16"-16, 1"-12,
M18x1.5, M20x1.5, and M22x1.5. Systems are available
Frame Rail Trans Coolers with our best-selling sandwich style filter system which
retains the factory
oil filter location
or a remote-style
filter system
which relocates
the oil filter to a
more convenient
location in
the engine
compartment.
Designed for street rod use, frame rail transmission Both full-flow
coolers feature a compact design that mounts to the systems use oil filters with 3/4"-16 thread such as
frame near the transmission. The flushable 1/2” tube Perma-Cool® 81008, Fram® PH8A, or equivalent (oil
cooler has -6AN male fittings and includes AN to barbed filter not included). Systems include oil hose, illustrated
fittings for use with hose or braided steel lines. instructions, and all necessary mounting hardware.
Part No. Description Description Sandwich Systems
PRM1000 Coil with -6 AN Male Fittings, 1-1/2" x 2-1/2" x 15" Light Duty Trucks and Vans
PRM1004 Coil with -6 AN Male Fittings, 1-1/2" x 2-1/2" x 24" 300 Horsepower, Coil Size:
PRM10189
1-1/2" x 7" x 14" with 1/2" Hose Barbs

2023 - 2024 HOT ROD AND EARLY MUSCLE 381

Heavy-Duty Power Steering Turbo-Flex® High-Performance Flex Fans
and Fuel Coolers Perfect for applications
that require extra cooling
PRM1002 such as turbo- or super-
Competition-ready coolers can charged vehicles or
be used with street, strip, and full-sized trucks used
racing power steering systems. for towing, fans help
Flushable two-pass coil measures 1-1/2” x 2-1/2” x 7-1/2” improve gas mileage and
and attaches with NPT or -6AN fittings. engine performance.
Available with chrome-
Automatic Transmission plated or black powder-
Fluid Filter Systems coated centers, they are
offered in standard or reverse rotation formats.
Standard System Part No. Description
PRM10678 Right-Hand Rotation
System features cast PRM85170 17" Black
aluminum filter mount, Perma- PRM85180 18" Black
Cool® transmission fluid filter, high- Left-Hand Rotation
pressure/high-temperature 11/32" transmission hose, PRM86180 18" Black Reverse
brass fittings, stainless steel hose clamps, mounting
hardware and illustrated instructions. Turbo-Flex® Universal Flex Fans
Fans feature a narrow blade width and moderate pitch
Street and High-Performance that improves air flow with minimal horsepower loss,
while special blade tips
Fuel Filter System minimize fan noise. A
High-Performance Filter Head two-piece center hub
PRM81794 ensures positive blade
Ideal for dual fuel pumps or carburetors, attachment. Available
system features dual inlets and outlets to with stainless steel blades
allow choice of flow direction and flows up and a black center hub,
to 5 GPM. Includes a cast aluminum filter or with red anodized
mount with 1/2”NPT ports, Perma-Cool 24,000 mile filter aluminum blades and a
element, and two pipe plugs. black powder-coated
center hub.
Part No. Description
18" Aluminum Flex Fan
Fan Spacer Systems PRM83182 Red Blades/Black Center
and Fan Clutch Replacer 15" Stainless Steel Flex Fans
PRM84150 Black Center

Sandwich Oil Adapter

Die-cast, CNC-finished aircraft-grade aluminum adapter
installs between the oil filter landing on the engine block
and the oil filter to route
oil to a remote oil cooler,
without relocating the oil
filter. Made in the USA.
Part No. Description
Adapter Fits M18 X 1.5 Thread Designed to Fit Most GM V6s.
PRM182 1" Thick. 3/8" NPT Ports for Use with 1/2" Oil Lines.
Die-cast aluminum fan spacers with 5/8" male pilot and 2-1/2" O-Ring Included.
3/4" female pilot hole. Comes with bushing to reduce
5/8" female pilot and 5/16" plated NC and NF mounting
hardware.
Part No. Description
PRM24150 1-1/2" Universal System
PRM24250 2-1/2" Universal System

382 2023 - 2024 HOT ROD AND EARLY MUSCLE

Spin-On Oil Adapters Bolt-On GM Canister Adapter
Die-cast, CNC-finished aircraft- PRM1134
grade aluminum converts the oil
Converts the stock canister-
filter landing on the engine block
style filter to a 13/16”-16 spin-on
to an oil passage that routes oil to a remote filter or oil
filter with 3-1/8” O-ring. Includes
cooler. Universal kits fit 90% of automotive applications
O-ring, gasket, and bolts for early
and include O-rings and illustrated instructions. Brass
and late model applications.
fittings and AN adapters sold separately. Made in the
USA.
Part No. Description
Universal Engine Oil Filter
PRM114
Fits 13/16"-16 Thread 1/2" NPT Ports 2-1/2" Relocation System
and 3-1/8" O-Rings Included
Fits 1"-16 Thread 1/2" NPT Ports 2-1/2" and 3-1/8" O-Rings
PRM1156
Included for Dodge Cummins® 5.9L, 6.7L

Dual-Port Oil Adapters

PRM2791
Dual-port oil adapters have fixed
port orientation, and include right
and left 1/2”NPT ports and a 2-1/2”
O-ring. 3/4"-16 Thread

Remote Oil Filter Mounts Oil filter relocation system moves the oil filter to a more
accessible location, adds extra clearance for engine
Available for single or
swaps, and increases oil capacity. Available as a single
dual filter applications,
or dual remote oil filter mount, the kit covers 90% of
remote oil filter mounts
all automotive applications. Fits engines with 3/4”-16,
allow filter placement in a
13/16”-16, 1”-12, M18x1.5, M20x1.5, and M22x1.5 spin-on
more accessible location.
oil filter thread sizes. Designed for use with filters with
Polished aluminum mount is made in PRM1211 13/16”-16 thread, such as Perma-Cool® PN 81008, Fram®
the USA and available in multiple sizes.
PH-8A, or equivalent. Oil filters not included.
Part No. Description
Part No. Description
Single Filter Mounts
PRM10695 Universal Single Filter System
PRM1211 1/2" NPT Ports Up, 3/4"-16 Thread
Custom-Fit Dual Filter System, 1"-16 Thread
PRM1213 1/2" NPT Ports Up, 13/16"-16 Thread PRM10756
(Dodge Cummins with 3/4" Thread Filters)
PRM1701 1/2" NPT Ports Left, 3/4"-16 Thread
Four Port Filter Mounts
PRM1791 1/2" NPT Ports Right and Left, 3/4"-16 Thread
Dual Filter Mounts
PRM1221 1/2" NPT Ports Right and Left, 3/4"-16 Thread

Full Synthetic Hypoid Gear/Blower “Classic” Multi-Purpose

High-Performance GL-4 SAE 80W-90 Gear Oil
GL-4 SAE 80W-90 gear oil is specially
Lubricant SAE 75W90 blended using high-grade Penn-Grade
Formulated for the ultimate protection in supercharger, mineral base stocks and select additive
blower, and hypoid gear applications. 100% synthetic, the technology. Recommended for use in all manual
oil is designed for use with self-contained systems where transmissions with brass, bronze, and copper “soft”
SAE75W, SAW 80W-90 or SAE90 grade gear oils are metal parts such as synchronizers, bushings, and
recommended. It is suitable for use in Roots and Lysholm transaxles. Not intended for use in limited slip
Screw type superchargers and may be used in manual applications. Does not contain friction modifiers.
transmissions and hypoid differentials where high shock
Part No. Description
loading is a concern.
BPO77296 1-qt. Bottle
Part No. Description BPO77296-12 Case of (12) 1-qt. Bottles
BPO77666 1-qt. Bottle
BPO77666-12 Case of (12) 1-qt. Bottles

2023 - 2024 HOT ROD AND EARLY MUSCLE 383

Break-In Oil SAE 20W-50
SAE 30 mono-grade oil formulated Designed to offer higher performance
specifically to meet the critical lubrication engines the cold temperature operational
needs of new engines during break-in benefits of an SAE “20W” engine oil while
while allowing proper seating of rings and providing the desired film strength; sealing
component “run-in”. Enhanced levels of abilities; bearing, crankshaft, piston
“zinc” (zinc dialkyldithiophosphate a.k.a. ring, and valvetrain component anti-wear
ZDDP) and superior oil film strength from protection of an SAE 50 weight oil at normal
Penn Grade™ base oils offer protection for engine operating temperatures. Not for use
even the most demanding of applications in vehicles with catalytic converters.
such as those presented by break-in of Part No. Description
engines with “flat tappet” cams. BPO71196 1-qt. Bottle
Part No. Description BPO71196-12 Case of (12) 1-qt. Bottles
BPO71206 1-qt. Bottle
BPO71206-12 Case of (12) 1-qt. Bottles
SAE 30
SAE 10W-30 A lighter straight-grade viscosity oil
characterized by its proven protection
A truly versatile high-performance oil
and performance. Along with its Penn
suitable for engines used both on the
Grade 1® straight-grade counterparts,
street and/or the track. The multi-viscosity
this high-performance oil offers excellent
grade and synthetic components facilitate
film strength and an effective detergent
cold starting and quicker engine warm-up
package, and is a good choice for the muscle
while ensuring adequate engine protection
car/street rod. Excellent oil for vintage and
during competition. Not for use in vehicles
air-cooled applications requiring a straight
with catalytic converters.
grade oil. Not for use in vehicles with
Part No. Description catalytic converters.
BPO71506 1-qt. Bottle
BPO71506-12 Case of (12) 1-qt. Bottles Part No. Description
BPO71396 1-qt. Bottle
BPO71396-12 Case of (12) 1-qt. Bottles
SAE 10W-40
Designed to meet the lubrication demands SAE 40
of traditional classic and muscle car engines
Formulated with the unique cut from our
as well as high-performance competition
Penn-Grade stocks, this heavy-viscosity
engines. Partial synthetic SAE 10W-40
straight-grade motor oil is designed to
high-performance oil offers the multi-
provide excellent protection for street
viscosity advantages of faster oil flow and
and competition engines. Its superior
engine warm-up as well as excellent film
film strength, highly effective detergent
strength and engine component anti-wear
package, and foam inhibitors make it an
protection. Not for use in vehicles with
optimal lubrication choice for muscle
catalytic converters.
car/hot rod enthusiasts. The increased
Part No. Description ZDDP provides outstanding antiwear/
BPO71446 1-qt. Bottle
anti-scuffing protection for older push rod-
BPO71446-12 Case of (12) 1-qt. Bottles
style engines with flat tappet cams. Excellent option for
vintage car lubricant and air-cooled applications where a
SAE 15W-40 mono-grade viscosity is preferred. Not for use in vehicles
A multi-viscosity option for engines exposed with catalytic converters.
to higher temperatures and mixed ambient
Part No. Description
conditions. Partial synthetic SAE 15W-40 BPO71406 1-qt. Bottle
high-performance oil possesses excellent BPO71406-12 Case of (12) 1-qt. Bottles
film strength and proven additive chemistry
to provide required performance in a wide SAE 50
range of operating situations. Not for use in
Heavy-viscosity, straight-grade motor oil
vehicles with catalytic converters.
designed to provide superior lubrication
Part No. Description for high-performance competition
BPO71586 1-qt. Bottle
engines fueled by gasoline, methanol, or
BPO71586-12 Case of (12) 1-qt. Bottles
nitromethane. Not for use in vehicles with
catalytic converters.
Part No. Description
BPO71156 1-qt. Bottle
BPO71156-12 Case of (12) 1-qt. Bottles

384 2023 - 2024 HOT ROD AND EARLY MUSCLE

Titan Blue Lithium Grease PennGrade Select
Designed for extreme lubrication conditions. A blend of high-performance synthetic
Its unique Micro Technology system provides base oils and balanced detergent systems,
a controlled release of microencapsulated antioxidants, and dispersants to minimize
particles to deliver a protective barrier that harmful deposit and sludge. Protect against
prevents metal-to-metal (boundary) contact. timing chain wear and low-speed pre-
Part No. Description ignition.
BPO12267T 14-oz. Cartridge Part No. Description
BPO12267T-50 Case of (50) 14-oz. Cartridges 5W30
BPO61516 1-qt. Bottle
Magnaplex NLGL #2 0W20
BPO61516-12 Case of (12) 1-qt. Bottles

A multi-use lithium complex grease. BPO61526 1-qt. Bottle

Waterproof and offers high-temperature BPO61526-12 Case of (12) 1-qt. Bottles
protection.
Part No. Description PennGrade Syn Blend
BPO12727T 14-oz. Cartridge
Premium base oils are combined with the
BPO12727T-50 Case of (50) 14-oz. Cartridges
latest high-performance additive technology
to protect against premature valvetrain wear
and extend the life of catalytic emissions
Reliant Premium Semi-Synthetic components. Designed for new and late
Diesel Engine Oil model gasoline-powered applications.
Formulated to exceed basic diesel engine Part No. Description
oil industry standards. 5W20
BPO62716 1-qt. Bottle
Part No. Description
BPO52004 15W40, 1-Gallon Jug BPO62716-12 Case of (12) 1-qt. Bottles
BPO52004-4 15W40, Case of (4) 1-Gallon Jugs 5W30
BPO52204 10W30, 1-Gallon Jug BPO62726 1-qt. Bottle
BPO52204-4 10W30, Case of (4) 1-Gallon Jugs BPO62726-12 Case of (12) 1-qt. Bottles
10W30
BPO62736 1-qt. Bottle
BPO62736-12 Case of (12) 1-qt. Bottles

Autotrans G3 Transmission Fluid PennGrade Full Synthetic

Automatic transmission fluid that meets The latest high-tech additive technology
Dexron® III H, Allison Type C-4, and Ford and premium quality synthetic base oils are
Mercon® requirements. formulated for today’s late model applications.
Part No. Description ILSAC GF-6.
BPO54506 1-qt. Bottle Part No. Description
BPO54506-12 Case of (12) 1-qt. Bottles 0W20
BPO62816 1-qt. Bottle
BPO62816-12 Case of (12) 1-qt. Bottles
AutoTrans Super Plus 5W20
BPO62826 1-qt. Bottle
High-viscosity full-synthetic automatic BPO62826-12 Case of (12) 1-qt. Bottles
transmission fluid designed for Allison, 5W30
BMW, Honda, Ford, Mercedes Benz, BPO62836 1-qt. Bottle
Mitsubishi, Nissan, Toyota, Volkswagen, BPO62836-12 Case of (12) 1-qt. Bottles
Voith, Volvo, and ZF applications.
Part No. Description Brad Penn Motor Oil
BPO54566 1-qt. Bottle The choice of many professional engine
BPO54566-12 Case of (12) 1-qt. Bottles builders, this break-in oil provides critical
wear control for engines while allowing
the engine components to seat, resulting
in maximum engine performance and life.
AutoTrans Super LV Suitable for gasoline and diesel engines.
Low-viscosity full-synthetic automatic Part No. Description
transmission fluid designed for Allison, BMW, 30W
Honda, Ford, Mercedes Benz, Mitsubishi, BPO70306 1-qt. Bottle
Nissan, Toyota, Volkswagen, Volvo, and ZF BPO70306-12 Case of (12) 1-qt. Bottles
applications.
Part No. Description
BPO54586 1-qt. Bottle
BPO54586-12 Case of (12) 1-qt. Bottles

2023 - 2024 HOT ROD AND EARLY MUSCLE 385

“Ignitor” Conversion Kits “Ignitor 3” Module
Great for muscle cars or nostalgia An adaptive dwell maintains peak
vehicles! Retains “factory look” energy throughout the entire
with the reliability of RPM range, reducing misfires,
modern electronics. improving engine performance
Kit replaces the stock and creating maximum energy
points and condenser without coil destroying heat
with Hall Effect build-up. Spark timing and rev limit
integrated circuitry to is adjustable. Five times more spark than points. Ignition
deliver twice the voltage of a points system and control box performance without the box.
dwell accuracy to within 1/4°. No external boxes required Part No. Description
- the ignitor fits entirely under the distributor cap, and will PRT71181 Delco 8 Cylinder
also work with an MSD amplifier box. Use with a “Flame- PRT71281 Ford 8 Cylinder
Thrower” coil. PRT71281D Ford 8 Cylinder, Dual Point
PRT71381A Chrysler 8 Cylinder
Part No. Description
GM 1957-74 V8 Most Single Points Distributors, PRT7ML-181 Mallory 25 and 26 Series
PRT1181
Uses a Magnetic Ring
PRT1181LS
GM 1957-74 V8 Most Single Points Distributors, Ignitor Points Eliminator Kit
Uses Cam Sensor
PRT1183 Chevy 1957-61 V8 Dual Point Distributors
for 1949-74 Ford 6-Cylinder
PRT1181LS Olds/Pontiac 1957-74 Single Points Distributors PRT1261
PRT1281 Ford 1957-74 V8 Single Points Distributors Provides increased voltage
PRT1381A Mopar 1960-72 V8 Single Points Distributors
for improved performance
PRTML-181 Mopar 1959-71 383, 413, 426 Dual Point Distributors
and fuel efficiency. The system
completely eliminates the contact
“Ignitor II” points and fits neatly underneath
Conversion Kits the distributor cap for a "stock" look.
Compared to a breaker Compatible with all 12-volt negative
points system, the Ignitor ground systems.
II averages four times
more available energy Flame-Thrower Coils
between 3000 and 5000 Flame-Thrower coils put out 40,000 volts and
RPM. With a Hall Effect are available in black or chrome. For use with
integrated circuit, the Ignitor II has on average three induction ignition systems.
times more available energy than the original Ignitor, and
Part No. Description
twice the available spark plug voltage. The best choice
PRT40001 Chrome Flame-Thrower Coil, Oil-Filled, 1.5 OHM
for a hot rod that will frequently see 3000 RPM and above. PRT40011 Black Flame-Thrower Coil, Oil-Filled, 1.5 OHM
Use with a “Flame-Thrower II” ignition coil. PRT40111 Black Flame-Thrower Coil, Epoxy, 1.5 OHM
Part No. Description
PRT91181 GM 1957-74 V8 Most Single Points Distributors Flame-Thrower II Coils
PRT91281 Ford 1957-74 V8 Single Points Distributor
PRT91381A Mopar 1960-72 V8 Single Points Distributor
Flame-Thrower II coils put out an incredible
45,000 volts. Compatible with capacitive
discharge systems.
Flame-Thrower Plug Wires
Part No. Description
Flame-Thrower wires have a low,
PRT45001 Chrome Flame-Thrower II Coil, Oil-Filled, 0.6 OHM
500-Ohm-per-foot resistance PRT45011 Black Flame-Thrower II Coil, Oil-Filled, 0.6 OHM
and are available in red, blue, PRT45111 Black Flame-Thrower II Coil, Epoxy, 0.6 OHM
and black. Universal kits include
terminals and boots for both Flame-Thrower Digital Rev Limiter
male- and female-style caps.
Part No. Description
PRT600
PRT808280 8mm Black Straight Boot Universal Wires Digital Rev Limiter is
PRT808380 8mm Blue Straight Boot Universal Wires compatible with any
PRT808290 8mm Black 90° Boot Universal Wires 4-, 6-, or 8-cylinder
PRT808390 8mm Blue 90° Boot Universal Wires engine using points,
PRT808490 8mm Red 90° Boot Universal Wires OEM electronic (GM
PRT808210 8mm Black Plug Wires SB Chevy with HEI, Over Valve Covers HEI, Ford, Chrysler) or
PRT808216 8mm Black Plug Wires BB Chevy with HEI
aftermarket inductive
PRT708101 7mm “Stock Look” Wires, Black for SB Chevy with Points Cap
ignition systems
PRT708102 7mm “Stock Look” Wires, Black for BB Chevy with Points Cap
PRT708103 7mm “Stock Look” Wires, Black for SB Chevy with Points Caps
including the popular Ignitor and
7mm “Stock Look” Wires, Black for SB Ford/BB Ford with Ignitor II. The unit’s small size (2.5" x
PRT708104 3" x 1.4") and four-wire hook-up enable
Points Cap
7mm “Stock Look” Wires, Black for SB Ford/BB Ford with an easy installation. Setting is easy with external digital
PRT708105
Points Cap rotary switches which eliminate the need for RPM “chips”.
PRT708107 7mm “Stock Look” Wires, Black for SB/BB Mopar

386 2023 - 2024 HOT ROD AND EARLY MUSCLE

High-Performance Module Flame-Thrower HEI Distributors
PRTD2000 Brand new HEI Distributors offer superb,
Develops 67% more energy than reliable performance up to 7500 RPM,
a stock HEI module and, when delivering twice the spark energy
teamed with the Flame-Thrower of stock HEI units. Flame-Thrower
high-performance coil, will operate misfire-free to 7500 distributors include: brass terminals
RPM and beyond. in cap and rotor, nylon rotor screws,
two extra sets of advance springs,
adjustable vacuum advance, hardened
GM HEI 50,000 Volt Coils distributor gear, centerless ground shaft
Windings maximize spark gap with bronze bushings, and an A384 alloy
current and available voltage and, housing.
when teamed with the Flame-
Part No. Description
Thrower module, will deliver twice Chevy V8 (Exc. 348-409) Cast Finish,
the energy across the spark gap compared PRTD1000
Black Cap
to the stock HEI. Chevy V8 (Exc. 348-409) Cast Finish,
PRTD1001
Part No. Description Red Cap
PRTD3000* Chevy 90° V6, Most V8, Cadillac V8 PRTD1100 Olds V8, Cast Finish, Black Cap
PRTD3001† Buick V6 and V8, Olds V8, Pontiac V8, 1981-91 Corvette PRTD1101 Olds V8, Cast Finish, Red Cap
PRTD1200 Pontiac V8, Cast Finish, Black Cap
* Replaces coils with red and yellow wire leads.
† Replaces coils with red and white wire leads. PRTD1201 Pontiac V8, Cast Finish, Red Cap

Flame-Thrower Coil-on-Plug Flame-Thrower Billet

Ignition Coils for Ford Engines “Plug-N-Play” Distributors
Direct OEM replacement coils for modular Billet Flame-Thrower distributor offers the
engines. Features include an optimized coil design hot rodder affordable technology without
that increases spark energy by 15% over stock and dependence upon an ignition box. Choose
are epoxy molded to prevent premature failure from from vacuum or non-vacuum advance,
moisture or winding fatigue. Available individually or female or male cap and red or black cap and
in sets of eight. experience Plug-n-Play technology.
Description Black Cap Red Cap
Part No. Description
Vacuum Advance Distributors
PRT30721 4.6L/5.4L Modular V8 2 Valve, Single
SB And BB Chevy
PRT30731 4.6L/5.4L Modular V8 3 Valve, Single PRTD100700 PRTD100701
(Std. Deck Height, Female Cap)
SB And BB Chevy (Std. Deck Height, Male
HEI Tune-Up Kits Cap)
PRTD100710 PRTD100711

Kits contain everything to wake Ford FE (Std. Deck Height, Male Cap) PRTD133700 —
up stock HEI distributors: coil and Non-Vacuum Distributors
module, premium cap and rotor, coil SB And BB Chevy
PRTD100800* —
(Std. Deck Height, Female Cap)
cover, adjustable vacuum advance SB And BB Chevy (Std. Deck Height, Male
canister, high-performance advance Cap)
PRTD100810* PRTD100811*
kit, wire harness, and capacitor. * Non-vacuum advance distributors do not have an E.O. number and are not legal for sale or
Part No. Description use on pollution-controlled vehicles.
PRTD8000 Chevy/Cadillac V8 with Black Cap
PRTD8001 Chevy/Cadillac V8 with Red Cap
PRTD8002 Chevy/Cadillac V8 with Blue Cap
Contour Starter
PRTD8010 Buick/Olds Pontiac, and 1981-91 Corvette with Black Cap PRTS3000P
Using powerful Nippondenso
Flame-Thrower motors with over 200 foot pounds
“Stock-Look” Distributors of torque and all new parts, the
Pertronix Flame-Thrower “stock-look” Contour starter will easily handle
distributors are loaded with features, high-compression performance
yet maintain the original look for the engines. It features fully enclosed
ultimate “sleeper”. All-new lightweight cast solenoids and a starter body that
aluminum OEM-style housing with hardened gear, can be rotated for clearance issues. Offered in polished
adjustable vacuum canister, optimized phasing for or black powder-coated finish. For use on Chevy 1963-74
maximum energy to spark plug, tailored curve kit, L6 and 1964-2000 SB/BB V8 engines with 153-/168-tooth
maintenance-free Ignitor electronics, trouble- flywheels.
free high dielectric-strength cap and rotor with
brass terminals, is ready to run right out of the
box!
Part No. Description
PRTD104600 Chevy V8 283-454, (Exc. Tall block)
PRTD134600 SB Ford 289-302
PRTD7104600 Chevy V8 283-454, Ignitor III (Exc. Tall block)
PRTD7134600 SB Ford 289-302

2023 - 2024 HOT ROD AND EARLY MUSCLE 387

Street and Strip “Live Wires” Spark Plug Wires
H.E.I. Distributors Live Wires have a spiral-
Single-piece ignition delivers consistent, wound core, durable silicone
reliable performance up to 7,000 RPM. No outer jacket, and space-age,
other ignition box is needed. Distributor heat-resistant sleeving for
has an internal coil and Dyna-Module for optimum spark travel and
maximum spark energy and a customized prevention of electronic
advance curve delivers exceptional interference. Sleeving is
throttle response. The long duration effective from 76° to +1,400°F,
spark increases horsepower, but draws and offers resistance to DUIC9053RD
only 2-3 amps from the battery. moisture and chemicals.
Part No. Description
Offered in red only, plug wires are custom fit with no
Chevy V-8, 1985-91 with Screw-Down Style Cap, assembly required.
DUI12611BK
Internal Coil Part No. Description
DUI12720RD Chevy V-8, Red Cap SB Chevy, Under Headers, HEI Distributor/
DUIC9051RD
90° Plug Boots
GM HEI Distributor DUIC9052RD SB Chevy, Long, HEI Distributor/90° Plug Boots
SB Chevy, Over Valve Covers, HEI Distributor/
Accessories DUIC9053RD
90° Plug Boots
D.U.I. offers a full selection of DUIC9054RD
SB Chevy, Around Front, HEI Distributor/
high-performance components for 90° Plug Boots
popular 1974-Up GM HEI distributors.
Part No. Description
Dyna-Module, High-Performance 4-Pin Module
DUI000222
for 1974-90 GM Without Computer
Battery and Tach Connectors,
DUI111111
Includes (1) Terminal and (1) Connector
Racing Coil Kit, Capable of 9,000 RPM,
DUI121000RD
Includes Cap, Rotor, and Coil
DUI333333 Vacuum Advance Eliminator
DUI444444 Nylon Rotor Hold-Down Screws, Help Prevent Misfire

Fast Orange Hand Cleaners Decal and Adhesive Remover

The #1 selling, biodegradable, waterless PEX80025
solvent-free hand cleaner. Contains no harsh
Quickly remove decals, adhesive residue,
chemicals, mineral oils, or ammonia that can
bumper stickers and window stickers.
irritate cuts and abrasions.
Contains no acetone and is safe for use
Part No. Description on glass, painted metal, plastic surfaces,
PEX25108 Fine Pumice Cleaner, 7.5-oz. Bottle
vinyl, leather, fabric, and wood. Pleasant
PEX25219 Fine Pumice Cleaner, 1-Gal. Bottle with Pump
citrus scent is safe for indoor use. 5-oz.
aerosol can.
Gear Oil RTV Sealant
PEX81182 Gear Oil RTV Gasket Maker
Withstands the harsh gear oil environment
in differentials and transfer cases. Friction PEX81182
modifiers in gear oils break down normal RTV OEM specified. Formulated to withstand
sealants, but not Permatex RTV Sealant. 3-oz. the harsh gear oil environment found in
tube, carded. differential and transfer cases, with or
without cut gaskets. 5-oz. cartridge.

Automatic Transmission Liquid Electrical Tape

RTV Sealant PEX85120
Weatherproof protectant for wiring
PEX81180 and electrical connections. Brush top
Complies with OEM specs and extended applicator covers without gaps, unlike roll
warranty requirements. Sealant resists aging, tape and shrink tubing. 4-oz. can.
weathering, and thermal cycling without
hardening, shrinking, or cracking. Sealant
offers good adhesion, remains flexible, and is
sensor-safe. 3-oz. tube, carded.
388 2023 - 2024 HOT ROD AND EARLY MUSCLE
Gasket Makers PermaPoxy
In­creased use of alu­mi­num, bi-metal alloys, PEX84101
and high-tech plastics has created the need for Easy-to-use, two-part epoxy bonds metal,
su­pe­ri­or RTV sil­i­cone gas­ket makers. Permatex fiberglass, rubber, plastic, etc. Sold in a .84-
offers carded tubes or cartridges. oz. carded syringe.
Carded Cartridge Cartridge Temp. (°F)
Description Carded oz. oz.
Ultra Black PEX82180 3.35 PEX24105 10.6 -65° to 500°
Ultra Blue
PEX81724 3.35 — — -65° to 500°
Thread Sealant with PTFE
No Leak A general-purpose fitting sealant.
Ultra Copper
PEX81878 3 — — -75° to 700° Remains pliable at high or low
Hi-Temp
Ultra Grey PEX82194 3.5 — — -65° to 500°
temperatures. Effective from -65° to
Blue Sensor 300°F.
PEX80022 3 — — -65° to 500°
Safe Part No. Description
Clear PEX80050 3 PEX80855 11 -75° to 400° PEX80631 1-oz. Tube
Black PEX81158 3 — — -75° to 400° PEX80632 4-oz. Can
Hi-Temp PEX81160 3 PEX81409 11 -65° to 650°
Sensor Safe
PEX81422 3 — — -65° to 650°
Hi-Temp
Threadlockers
De­vel­oped to pos­i­tive­ly lock­ and seal­
The Right Stuff Gasket Maker threaded fasteners. Threadlockers fill the
Repair leaks quickly with The Right Stuff space between threads on metal parts and
leakproof gasket maker. Modern rubber gasket then hard­en for a tough adhesive bond and
technology is incorporated in this product seal.
which is used on production lines by GM, Ford,
Part No. Description
and Chrysler. Temperature range is -75° to
PEX24200 Medium Strength Blue, Carded 6 ml Tube
450°F. PEX24300 Medium Strength Blue, Carded 10 ml Bottle
Part No. Description PEX24240 Medium Strength Blue, Carded 36 ml Bottle
PEX25223 4-oz. Tube PEX27100 High Strength Red, Carded 6 ml Tube
PEX25224 7-oz. Tube PEX27140 High Strength Red, Carded 36 ml Bottle
PEX33694 10-oz. Tube PEX27200 Hi-Temp/Hi-Strength Red, Carded 10 ml Bottle
PEX29208 5-oz. Cartridge
Anti-Seize Lubricant
Copper Spray-A-Gasket Blend of aluminum, copper, and graphite
PEX80697 lubricants prevents galling, corrosion and
Sealant helps dissipate heat, improves heat seizing for easier disassembly. Works well
transfer, and prevents gasket burnout. Seals anywhere, including lubrication of slip-on
minor surface imperfections instantly. Ideal collectors, adjustable header tubes or any
for head, exhaust manifold and carburetor other exhaust tubing for easier disassembly.
gaskets. Temperature range -50° to 500°F. Effective from -60° to 1200°F.
Sold in a 12-oz. aerosol can. Part No. Description
PEX80078 8-oz. Brush-Top Bottle
PEX81343 1-oz. Carded Tube
High-Performance
Thread Sealant Ultra-Slick Engine Assembly Lube
PEX56521 PEX81950
Formulated for tapered pipe fittings, Ultra-Slick prevents galling and scuffing
sealant replaces PTFE tape or pipe dope. during critical initial engine start-up.
Works well on head bolts (that pass through Superior adhesion qualities meet or exceed
water jackets), sending units, sensors, fuel stock performance specifications for
fittings, oil and coolant lines, and rear axle engine assembly lubricant. Use on bearings,
fill plugs. 50 ml tube. camshafts, lifters, valves, guides, and rocker
shaft assemblies. 4-oz. bottle.
High-Temperature
Thread Sealants
Sealant is used to lock and seal threaded
fittings or bolts. Often used on head bolts
(that enter water jackets), oil sending units,
fuel fittings, rear axle plugs, brake and
power steering fittings, etc.
Part No. Description
PEX59214 6 ml Carded Tube
PEX59235 50 ml Carded Tube

2023 - 2024 HOT ROD AND EARLY MUSCLE 389

Drag F/X Slicks
Phoenix Drag F/X slicks are Front F/X Tires
manufactured with Firestone
racing technology. The F9
PHOPH180
medium-soft compound is ideal Lightweight bias-ply front tires
for drag race cars over 2,500 made of DE compound, DOT
pounds. certified for street/strip racing
classes. Tires have solid white
Part No. Size CO. T.W. RIM T.D. T.W. CIR.
letters.
PHOPH337 12.2/31.25-15W* F9 33 lbs. 14" 31.8 13.4 99.5
PHOPH55R 13.6/32.0-15RAD** F9 30 lbs. 14" 32.2 13.6 101.25 Size T.W. RIM T.D. T.W. CIR.
PHOPH335 14.0/32.0-15 F9 33 lbs. 14" 32.5 14.2 101.0 4.5/26.0-15 12 lbs. 4" 26.7 5.2 84.0
PHOPH56R 14.5/32.0-15RAD** F9 31 lbs. 14" 32.3 14.9 101.5
* W = Wide / ** RAD = Radial

Metal Prep Brake Caliper Painting Kits

Use Prep & Ready to guarantee the best Make old, corroded looking
paint adhesion on any metal surface, calipers look better than new
including polished aluminum. Etches with bright ceramic-like colors
surface and leaves a zinc phosphate that can withstand temperatures
coating for application of POR-15 rust up to 350°F! Caliper painting
preventive paint. Sold individually. kits include everything needed,
Part No. Description including POR-15 cleaner/
POR40204 1 Quart, Each degreaser, metal prep, rust
POR40201 1 Gallon, Each preventative, caliper paint, gloves, and applicators.
Part No. Description
Rust Remover POR42639 Brake Caliper Painting Kit, Black
Remove even heavy rust from steel POR42839 Brake Caliper Painting Kit, Black
without sanding or scrubbing. Reusable,
biodegradable water-based formula works
in as fast as 20 minutes, and will not harm Car Care Products
metals, plastics, PVC, Viton, and most POR-15 brings their expertise in car restoration
paints. Non-corrosive and solvent-free. and rust prevention to professional-grade
Part No. Description car care products. With formulas designed
POR40704 Rust Remover, 1 Quart, Each to maximize shine without harming paint and
POR40701 Rust Remover, 1 Gallon, Each finishes, POR-15's line of cleaners and polishes
helps maintain beauty that lasts for any hot rod
Engine Enamel or show car.
With rich colors that flow easily, POR 15 Part No. Description
produces some of the most beautiful engine POR51020 Car Shampoo Concentrate, 16-oz. Bottle
enamels available. Non-flammable formula POR53012 1-Step Polishing Compound, 16-oz. Bottle
is available in a variety of colors and is sold POR53020 Detailer Spray Wax, 16-oz Bottle
in either pint or quart containers. POR54020 Interior Cleaner and Detailer, 16-oz. Bottle
Part No. Description Size POR56020 Wheel Cleaner, 16-oz. Bottle
POR42034 Black 1 Quart POR56520 Tire Cleaner/Dressing Crème, 16-oz. Bottle
POR42238 White 1 Pint
POR42264 Chevy Orange 1 Quart Fuel Tank Repair Kit
POR42268 Chevy Orange 1 Pint
POR49239
2K Urethane Fuel tank repair kit includes
everything needed to completely
POR43504 repair a steel fuel tank. Kit includes
Clear urethane is a tough, glossy two- Marine Clean (removes gum,
component coating that helps protect sludge, varnish from tank), Prep
surfaces, even in high moisture and & Ready (removes rust/prepares
humidity. 1 quart. tank), U.S. Standard Fuel Tank
Sealer (permanently seals tank),
Fuel Preservative & Stabilizer, and
detailed instructions. Sold as a kit.

390 2023 - 2024 HOT ROD AND EARLY MUSCLE

Matte Clear Coat POR Patch
This premium-quality two-part, low- POR49013
sheen sealer is specifically designed
This incredibly strong
to deliver extreme resistance to
permanent seam, hole, and channel
scuffing and burnishing. Formulated
filler actually adds strength to weakened metal.
with low-VOC, waterborne
Bonds steel to plastic, wood, or concrete. Dries rock
polyurethane clear coat technology
hard, remains flexible, and is totally impervious to fuels
that is silica-free and has excellent weathering
and solvents once dry. Will not absorb moisture and swell
properties. Can be used on any substrate that can be
like conventional body fillers. 4-oz. tube.
cleared with a traditional clear coat.
Part No. Description
POR44901 Matte Clear Coat Kit, One Gallon
POR44904 Matte Clear Coat Kit, One Quart Top Coat
Pro-15 Top Coat may be applied directly to
POR-15 a clean prepped metal surface but,
No need to remove rust first! The secret lies when used as a top coat over POR-15
in POR-15’s curing process. POR-15 dries Rust Preventive Coating it provides
faster when moisture is present. It has the toughest, most permanent
the opposite chemistry of ordinary paints. protection against rust and corrosion
POR-15’s incredible hardness, toughness, ever developed. It won't crack, chip or
and flexibility is practically indestructible. peel and will look terrific.
Perfect for auto restoration, POR-15 protects POR45008 Part No. Description Size
metal areas from reoccurring rust and POR45808 Gloss Black Pint
abrasion. Available in black, gray, silver, and semi-gloss POR45804 Gloss Black Quart
POR45908 Chassis Black Pint
black colors. Sold individually.
POR45904 Chassis Black Quart
Part No. Description POR45718 Clear 14-oz. Aerosol Can
POR45008 Black, Pint, Each POR46018 Silver 14-oz. Aerosol Can
POR45004 Black, Quart, Each
POR45208 Gray, Pint, Each
POR45204 Gray, Quart, Each
High-Build Primer
POR45308 Silver, Pint, Each Tie-Coat is a buildable and sandable
POR45304 Silver, Quart, Each primer to paint over well-cured POR-15.
POR45408 Semi-Gloss Black, Pint, Each Easy to apply primer has great adhesion
POR45404 Semi-Gloss Black, Quart, Each qualities. Sands smoothly when leveling
and filling surface irregularities.
POR-15 Stop Rust Kit Compatible with all paint systems and bake
ovens. Sold individually.
POR40909
Try it first! The super starter Part No. Description
POR41108 Pint, Each
kit is an entire 3-step rust- POR41104 Quart, Each
stopping system. You’ll get a 4-oz.
can of POR-15 (12 sq. ft. coverage),
half-pint of Marine Clean, half-pint of Prep
& Ready, two wooden handle paint brushes High-Temp Paints
and a pair of special high-dexterity surgical latex gloves. Designed to withstand extreme
Sold as a kit. temperatures up to 1200°F, POR 15 high-
temp paints provide a rich color that won’t
burn off under extreme conditions. Can
POR-15 Six Pack be brushed or sprayed, and is available in
POR45006 standard containers or spray can.
The POR-15 Six Pack contains six Part No. Description Size
4-oz. cans of black POR-15. Each POR44116 Flat Black 8-oz. Can
can covers 12 sq. ft. Open each can POR44118 Flat Black 1-oz. Aerosol Can
as needed for small rust preventive POR44204 Manifold Gray Quart
projects to prevent waste. POR44216 Manifold Gray 8-oz. Can
POR44304 Aluminum Quart
POR44318 Aluminum 15-oz. Aerosol Can
Detail Paint
Spray-on metallic paint has excellent adhesion
properties and will not crack, chip, or peel. Non-
porous finish is scratch and abrasion resistant.
Sold in 15-oz. spray cans.
Part No. Description Size
POR41618 Cast Aluminum 15-oz. Aerosol Can
POR41718 Cast Iron 15-oz. Aerosol Can

2023 - 2024 HOT ROD AND EARLY MUSCLE 391

OE-Style GM Alternators PowerMAX Plus Starters
OE-style 12V alternators with a big Compact, lightweight starters
boost in power for GM applications. have a 3.7:1 gear-reduction ratio
Available in multiple finishes, including and are compatible with most
black powder coat, polished, and headers and kick-out oil pans. Adjustable mounting block
chrome finish. allows solenoid to be inverted down.
Part No. Description Part No. Description
GM AD-Style 220- Amp Alternator with OEM 4-Pin Chevy Mini Starter, 153- or 168-Tooth Flywheels,
PWM482378 PWM19000
Connection and 6-Rib Serpentine Pulley. Natural Finish. with Bolts, Chrome Plated
GM AD-Style 165-Amp Alternator with 6-Rib Serpentine Chevy Mini Starter, 153- or 168-Tooth Flywheels,
PWM482478 PWM9000
Pulley. Natural Aluminum Finish. with Bolts, Plain
GM LS-Style 220-Amp Alternator with 6-Rib Serpentine PWM9002 1953-62 Ford Y-Block
PWM582378
Pulley. Black Powder-Coated Finish. PWM9162 Ford 289-351W with AT or 5-SPD Permanent Magnet Starter
GM LS-Style 165-Amp Alternator with 6-Rib Serpentine PWM9109 Chevy/Pontiac LS, LSX, 168-Tooth Flywheels
PWM582478
Pulley. Black Powder-Coated Finish. PWM9182 Ford 429-460 Permanent Magnet Starter
GM 105-Amp Alternatorwith 1-Wire Connection, Internal PWM9201 Chevy/Pontiac LS Engines, Plain
PWM7802-111
Regulator, and Single V-Belt Pulley. Natural Finish.
PWM9300 Chrysler V8 Mini Starter

Ford PowerStroke Alternator

PWM48479 Racing Starters
Powermaster offers three racing starters. All have
Ford 155-amp 12V alternator has an
4.4:1 gear reduction ratios and many have the patent-
8-rib serpentine pulley. For 2004-07
pending Infi-Clock feature to provide maximum header
Ford Powerstroke engines.
and oil pan clearance with an adapter block and clocking
system.
Small Block Ford Alternator
Bracket Kit Mastertorque
PWM729 Weighs 10.5 lbs. and has 180 ft./
Straight mount-style lbs of cranking power for engines
bracket kit for Small Block with up to 12:1 compression
Ford engines is made ratios.
from lightweight aluminum and includes all necessary
mounting hardware. Polished finish.
XS Torque
Powergen Alternators Weighs 8.5 lbs. and has
The look of your generator with 200 ft./lbs. of cranking power
the performance and reliability for engines with up to 18:1
of an alternator. Benefits compression ratios.
include one-wire hookup, easy
installation, and an internal
regulator. Designed to provide
a huge amp increase and stop
dimming lights. Billet aluminum for half the weight. Ultra Torque
Available in black powder-coated, polished, or chrome Weighs 10.5 lbs. with a 2.5KW,
finish. 3.4 horsepower motor delivering
Part No. Description 250 ft./lbs of power.
PWM82051 GM Long, Chrome, 90-Amp
PWM82051-2 Same As PWM82051, with Light Terminal
180 ft./lbs. 200 ft./lbs. 250 ft./lbs.
PWM82011 Black Ford Flathead, 1939-48 Application Mastertorque XS Torque Ultra Torque
PWM82011-2 Black Ford Flathead, 1939-48, with Light Terminal Part No. Part No. Part No.
Chevy, 153-/168-Tooth Flywheel PWM9600 — PWM9450
Ford, 390,427,428, FE PWM9606 PWM9506 —
1964-66 Buick Nailhead — PWM9501 —
1965-87 Chrysler PWM9613 — PWM9413
Oldsmobile/Pontiac V8 PWM9610 — —

392 2023 - 2024 HOT ROD AND EARLY MUSCLE

Alternators
Powermaster offers a wide selection of alternators for your street rod or muscle car. Offered in natural,
polished, chrome, black wrinkle, or the latest brushed finish. With output from 70 amps to 300 amps
Powermaster has a unit to do the job for you. All Powermaster alternators are 100% new and made in
the USA. Every unit is Dyno tested and comes with a proof-of-performance tag for that particular unit.
Part No. Description
PWM8-37100 100-Amp Ford Upgrade GM Style, 70 Amps at Idle, Chrome Plated
PWM17078 60-Amp Ford Early Style, 40 Amps at Idle, Chrome Plated
PWM17509 75-Amp Mopar, 50 Amps at Idle, Chrome Plated, Double Groove Pulley Included
PWM17519 75-Amp Mopar, 50 Amps at Idle, Chrome Plated, Single Groove Pulley Included
PWM17294* 100-Amp GM, 70 Amps at Idle, Chrome Plated
PWM27294* 100-Amp GM, 70 Amps at Idle, Polished Finish
PWM17802 105-Amp GM for Tuned Port SB Chevy, 70 Amps at Idle, Chrome Plated, V-Belt and Serpentine Pulleys Included
PWM378021 140-Amp GM, Chrome Plated, One Wire, Straight Mount, V-Belt and Serpentine Pulleys Included
* Can be used in 1-wire or 3-wire configuration.

Vehicle Chemical Solutions

Part No. Description
PJ115-202 Foam Filter Care Kit, 28-oz.
PJ116-HIT Flat Black Hi-Temp Paint, 2000°F, 11-oz.
PJ116-ENG Gloss Black Engine Paint, 500°F, 11-oz.
PJ116-SAT Satin Black Engine Paint, 500°F, 11-oz.
PJ116-GLS Gloss Black Epoxy Paint, 250°F, 11-oz.

Pro-Tuff Gear Lube

40 Below PRB8398
PRB4032 Eliminates Ring and Pinion Failure.
Stops Overheating. Reduces gear lube temperature by up to
Reduces water temperature by up to 40°F. 60°F. Triples gear life in transmissions,
Keeps temperature under control under rear ends, and transaxles and stops
all off-road driving conditions. 32-oz. blueing and galling. Absorbs shock and
container. loading. 16-oz. container.

2023 - 2024 HOT ROD AND EARLY MUSCLE 393

Sportsman
Pro Series 1615
Pro Series seat is perfect for any
style vehicle, from a show quality
Sportsman Series
Corvette, to daily driven hot rod. The 1605, 1606, 1610
all-new Stealth Sport Seat Recliner This awesome sport seat has all
is a perfect solution. Micro recliner the great features found in our
mechanism allows adjustment of the Rave Seat with sleek lines and a
seat back to ensure your maximum slightly different feel.
comfort. Sold each. Please specify right or left seat.
Part No. Description Part No. Description
SCA80-1615-71 Black Velour/Black Vinyl SCA80-1605-61 Black Vinyl Inside, Black Velour Wings & Side Bolsters
SCA80-1615-73 Grey Velour/Black Vinyl SCA80-1605-62 Black Vinyl Inside, Grey Velour Wings & Side Bolsters
SCA80-1615-90 Red Velour/Black Vinyl SCA80-1605-64 Black Vinyl Inside, Red Velour Wings & Side Bolsters
SCA80-1606-61 Black Velour Inside, Black Velour Wings & Side Bolsters
SCA80-1606-62 Black Velour Inside, Grey Velour Wings & Side Bolsters
SCA80-1606-64 Black Velour Inside, Red Velour Wings & Side Bolsters
SCA80-1606-65 Black Velour Inside, Blue Velour Wings & Side Bolsters
SCA80-1610-51 Black Synthetic Leather
PRO-90 Series
1300 Compact Seat
SCA80-1300-51
An unbeatable combination of style,
comfort, and affordability, the
black vinyl PRO-90 has built-in
headrests.
Please specify right or left seat. Custom Seat Adapters
Part No. Description
Chevrolet
SCA81204 1967-69 Camaro, Driver
SCA81205 1967-69 Camaro, Passenger
Lowback Series SCA81176 1970-74 Camaro, Driver
1400 Compact Seat SCA81177 1970-74 Camaro, Passenger
SCA81178 1975-81 Camaro, Driver
A variation of the PRO-90, the Lowback
SCA81179 1975-81 Camaro, Passenger
is equally at home in pre-1948 resto-rods
SCA81168 1982-92 Camaro, Driver
or 50s customs. Without a headrest, the SCA81169 1982-92 Camaro, Passenger
seat is only 24" tall, making it ideal SCA81512 1964-67 Chevelle, Driver
for earlier, smaller cars. SCA81513 1964-67 Chevelle, Passenger
Please specify right or left seat. SCA81704 1968-72 Chevelle, Driver
Part No. Description SCA81705 1968-72 Chevelle, Passenger
SCA80-1400-52 Gray Vinyl SCA81184 1978-87 Chevelle, Driver
SCA80-1400-51 Black Vinyl SCA81185 1978-87 Chevelle, Passenger
SCA80-1400-99 Frame and Foam Only SCA81104 1966-67 Nova, Driver
SCA81105 1966-67 Nova, Passenger
SCA81506 1968-74 Nova, Driver
SCA81507 1968-74 Nova, Passenger
Dodge
Rally Series 1000 Hot Seat SCA81342 1966-77 Charger, Driver
Pronounced side bolstering and SCA81343 1966-77 Charger, Passenger
bold, vertical stitching combine to Ford
create a seat with a vintage look and SCA81266 1965-70 Mustang, Common Driver/Passenger
the support and comfort of a late SCA81828 1978-93 Mustang, Common Driver/Passenger
model bucket.
Please specify right or left seat.
Part No. Description
SCA80-1000-54 Beige Vinyl
SCA80-1000-51 Black Vinyl
SCA80-1000-99 Frame and Foam Only

394 2023 - 2024 HOT ROD AND EARLY MUSCLE

Alignment Cam Bolt Kits
Moog
Part No. Description Ref # Position Vehicle Applications
Chevrolet Chevy II (1962-1967), Ford Fairlane (1966-1970),
Ford Falcon (1966-1970), Ford Granada (1975-1980), Ford Maverick (1970-1977),
Front Lower
Upper Cam Bolt Kit K8243A Ford Mustang (1967-1973), Ford Ranchero (1966-1971),
Control Arm
Ford Thunderbird (1967-1973), Ford Torino (1968-1971),
Mercury Comet (1966-1969,1971-1977), Mercury Cougar (1967-1973)
Upper Cam Bolt Kit K8243A Rear Upper Chevrolet Corvette (1963-1982)
PFG120-10009
Dodge Charger (1966-1972), Dodge Coronet (1959,1965-1972),
Ford Mustang (1967-1973), Plymouth Barracuda (1964-1969),
Front Upper
Upper Cam Bolt Kit K8243A Plymouth Belvedere (1959-1970), Plymouth Belvedere II (1965-1967),
Control Arm
Plymouth Cuda (1970-1974), Plymouth Duster (1970-1976), Plymouth GTX (1967),
Plymouth Roadrunner (1968-1975)
Upper Cam Bolt Kit K8243A Front Upper Dodge Challenger (1970-1974)

Body Mount Set

Part No. Description Position Vehicle Applications
Billet Aluminum Chevrolet Camaro (1967-1981), Chevrolet Chevy II (1968),
PFG134-10005 Front
Subframe Bushing Kit Chevrolet Nova (1969-1974), Pontiac Firebird (1967-1981)

Steering Center Links

Moog
Part No. Description Ref # Vehicle Applications (not all applications listed)
PFG106-10066 Center Link DS829 Chevrolet Camaro (1972-1981), Chevrolet Nova (1975-1979), Pontiac Firebird (1980-1981)
E-Coated
PFG106-10103 — Chevrolet Camaro (1967-1969), Chevrolet Nova (1968-1974), Pontiac Firebird (1967-1968)
Center Link
E-Coated Buick Gran Sport (1965-1967), Chevrolet Chevelle (1964-1967), Chevrolet El Camino (1964-1967),
PFG106-10108 —
Center Link Chevrolet Malibu (1964-1967), Oldsmobile 442 (1964-1965), Oldsmobile Cutlass (1964-1965)
Chevrolet Chevelle (1968-1972), Chevrolet El Camino (1968-1972), Chevrolet Monte Carlo (1970-1972),
E-Coated
PFG106-10062 DS749 Oldsmobile 442 (1968-1971), Oldsmobile Cutlass (1968-1972), Pontiac GTO (1968-1972),
Center Link
Pontiac Grand Prix (1969-1972), Pontiac LeMans (1968-1972), Pontiac Tempest (1968-1970)
Chevrolet Chevelle (1964), Chevrolet El Camino (1964), Chevrolet Malibu (1964), Oldsmobile 442 (1964-1967),
E-Coated
PFG106-10060 — Oldsmobile Cutlass (1964-1967), Oldsmobile Cutlass Supreme (1967), Pontiac GTO (1964-1965),
Center Link
Pontiac LeMans (1964-1965), Pontiac Tempest (1964-1965)
E-Coated
PFG106-10011 DS1049 Chevrolet Camaro (1982-1992), Pontiac Firebird (1982-1992)
Center Link
E-Coated
PFG106-10063 — Pontiac GTO (1966-1967), Pontiac LeMans (1966-1967), Pontiac Tempest (1966-1967)
Center Link

Steering Idler Arms

Moog
Part No. Description Position Vehicle Applications
Ref #
E-Coated Chevrolet Camaro (1968-1969), Chevrolet Chevy II (1968), Chevrolet Nova (1970-1974), Pontiac
PFG102-10008 K6099 Front
Idler Arm Firebird (1968)
Chevrolet Chevelle (1964,1968-1972), Chevrolet El Camino (1964,1968-1972),
E-Coated
PFG102-10006 K5143 Front Chevrolet Malibu (1964), Chevrolet Monte Carlo (1970-1972), Pontiac GTO (1964-1971),
Idler Arm
Pontiac Grand Prix (1969-1972), Pontiac LeMans (1964-1972), Pontiac Tempest (1964-1970)
Chevrolet Bel Air (1965-1966), Chevrolet Biscayne (1965-1966), Chevrolet Caprice (1966),
PFG102-10070 Idler Arm — Front
Chevrolet Impala (1965-1966)
Chevrolet Bel Air (1967-1970), Chevrolet Biscayne (1967-1970), Chevrolet Caprice (1967-1970),
PFG102-10069 Idler Arm — Front
Chevrolet Impala (1967-1970)
E-Coated
PFG102-10003 — Front Chevrolet Camaro (1967), Pontiac Firebird (1967)
Idler Arm
PFG102-10009 Idler Arm K6100 Front Chevrolet Corvette (1963-1982)

2023 - 2024 HOT ROD AND EARLY MUSCLE 395

Steering Linkage Assemblies
Part No. Description Vehicle Applications
PFG116- E-Coated Performance Steering Chevrolet Chevelle (1964-1966), Chevrolet El Camino (1964-1967), Chevrolet Malibu (1964-1967),
10009 Rebuild Kits Oldsmobile 442 (1965), Oldsmobile Cutlass (1964-1965)
E-Coated Performance Steering Chevrolet Chevelle (1968-1970), Chevrolet El Camino (1968-1970), Chevrolet Monte Carlo (1970), Oldsmobile 442 (1968-1970),
PFG116-10013
Rebuild Kits Oldsmobile Cutlass (1968-1970), Pontiac GTO (1968-1970), Pontiac LeMans (1968-1970), Pontiac Tempest (1968-1970)
E-Coated Performance Steering Buick GS (1971-1972), Buick Skylark (1971-1972), Chevrolet Chevelle (1971-1972), Chevrolet El Camino (1971-1972),
PFG116-10015
Rebuild Kits Chevrolet Monte Carlo (1971-1972), Oldsmobile 442 (1971), Pontiac GTO (1971-1972), Pontiac LeMans (1971-1972)
E-Coated Performance Steering Buick Regal (1978-1988), Chevrolet El Camino (1978-1987), Chevrolet Monte Carlo (1978-1988), GMC Caballero (1978-1987),
PFG116-10011
Rebuild Kits Oldsmobile Cutlass (1978-1981), Pontiac Grand Prix (1978-1988), Pontiac LeMans (1978-1981,1988)
E-Coated Performance Steering
PFG116-10010
Rebuild Kits
Buick Roadmaster (1991-1996), Chevrolet Caprice (1978-1995), Chevrolet Impala (1978-1985,1994-1996)
PFG116- E-Coated Performance Steering Chevrolet Chevelle (1964-1966), Chevrolet El Camino (1964-1966), Chevrolet Malibu (1964-1966), Oldsmobile 442 (1966-1967),
10008 Rebuild Kits Oldsmobile Cutlass (1964-1967), Pontiac GTO (1964-1965), Pontiac LeMans (1964-1965)
E-Coated Performance Steering
PFG116-10019
Rebuild Kits
Chevrolet Camaro (1968-1969), Chevrolet Chevy II (1968), Chevrolet Nova (1969-1974)
E-Coated Performance Steering
PFG116-10014
Rebuild Kits
Chevrolet Camaro (1970-1981)
E-Coated Performance Steering
PFG116-10016
Rebuild Kits
Chevrolet Camaro (1982-1992), Pontiac Firebird (1982-1992)
PFG116- Dodge Challenger (1970-1972), Dodge Charger (1968-1972), Dodge Coronet (1968-1972), Plymouth Barracuda (1970-1972),
Fast Ratio Pitman and Idler Arm Kit
10026 Plymouth Belvedere (1968-1971), Plymouth Cuda (1970-1972)
PFG116- E-Coated Performance Steering
10020 Rebuild Kits
Pontiac Firebird (1970-1981)
E-Coated Performance Steering
PFG116-10012
Rebuild Kits
Pontiac GTO (1966-1967), Pontiac LeMans (1966-1967), Pontiac Tempest (1966-1967)

Steering Pitman Arms

Moog
Part No. Description Ref # Vehicle Applications (not all applications listed)
E-Coated Chevrolet Chevelle (1964-1967), Chevrolet El Camino (1964-1967), Chevrolet Malibu (1964-1967), Oldsmobile 442 (1965),
PFG103-10040 —
Pitman Arm Oldsmobile Cutlass (1964-1965),
Chevrolet Chevelle (1964,1968-1972), Chevrolet El Camino (1964,1968-1972), Chevrolet Malibu (1964), Chevrolet Monte Carlo (1970-1972),
E-Coated
PFG103-10041
Pitman Arm
— Oldsmobile Cutlass (1964-1972), Oldsmobile Cutlass Supreme (1967-1972), Pontiac GTO (1964-1971), Pontiac Grand Prix (1969-1972),
Pontiac LeMans (1964-1972), Pontiac Tempest (1964-1970)
PFG103-10012 Pitman Arm K6582 Chevrolet Camaro (1967-1969), Chevrolet Chevy II (1968), Chevrolet Nova (1970-1972), Pontiac Firebird (1967-1968)
Dodge Challenger (1973-1974), Dodge Charger (1973-1977), Dodge Dart (1973-1976), Plymouth Barracuda (1973-1974), Plymouth Duster
PFG103-10015 Pitman Arm K7076
(1973-1976), Plymouth Roadrunner (1973-1975)
Dodge Challenger (1970-1972), Dodge Charger (1966-1972), Dodge Dart (1962), Plymouth Barracuda (1970-1972),
PFG103-10030 Pitman Arm —
Plymouth Cuda (1970-1972), Plymouth GTX (1967-1971), Plymouth Roadrunner (1968-1972),
Fast Ratio
PFG103-10031
Pitman Arm
— Dodge Challenger (1970-1972), Dodge Charger (1968-1972), Plymouth Barracuda (1970-1972), Plymouth Cuda (1970-1972)
E-Coated
PFG103-10044
Pitman Arm
— Buick Skylark (1964-1967), Buick Gran Sport (1965-1967), Buick Special (1964-1967)
E-Coated
PFG103-10045
Pitman Arm
— Buick Skylark (1968-1972)
E-Coated
PFG103-10047
Pitman Arm
— Chevrolet Camaro w/ Manual Steering (1970-1981)
E-Coated Buick LeSabre (1977-1990), Buick Roadmaster (1991-1996), Chevrolet Caprice (1977-1996), Chevrolet Impala (1977-1996),
PFG103-10049 —
Pitman Arm Oldsmobile Delta 88 (1977-1984), Pontiac Bonneville (1977-1981), Pontiac Catalina (1977-1981)
E-Coated
PFG103-10050
Pitman Arm
— Ford F100/F150/F250 RWD (1975-1979)
E-Coated
PFG103-10051
Pitman Arm
— Chevrolet Camaro w/ Power Steering (1970-1981)
E-Coated
PFG103-10052
Pitman Arm
— Ford Mustang (19641/2-1966)
E-Coated
PFG103-10053
Pitman Arm
— Dodge Dart (1963-1966), Dodge Lancer (1962), Plymouth Barracuda (1964-1966), Plymouth Valiant (1962-1966)
Buick Regal (1978-1987), Chevrolet Camaro (1982-1992), Chevrolet El Camino (1978-1987), Chevrolet Malibu (1978-1983),
E-Coated
PFG103-10055
Pitman Arm
— Chevrolet Monte Carlo (1978-1988), GMC Caballero (1978-1987), Oldsmobile Cutlass (1978-1988), Pontiac Bonneville (1982-1986),
Pontiac Firebird (1978-1992), Pontiac Grand Prix (1978-1987)
E-Coated
PFG103-10057
Pitman Arm
— Ford Mustang (1971-1973), Mercury Cougar (1971-1973)
E-Coated
PFG103-10058
Pitman Arm
— Chevrolet Corvette (1963-1982)

396 2023 - 2024 HOT ROD AND EARLY MUSCLE

Steering Tie Rod Ends
Part No. Description Moog Ref # Position Vehicle Applications (not all applications listed)
Chevrolet Camaro (1967-1969), Chevrolet Chevelle (1964-1970), Chevrolet Chevy II (1968),
Chevrolet El Camino (1964-1970), Chevrolet Monte Carlo (1970), Chevrolet Nova (1970-1974),
E-Coated Inner Tie Rod
PFG104-10382 ES681N Front Inner Oldsmobile 442 (1968-1970), Oldsmobile Cutlass (1964-1970), Pontiac Firebird (1967-1968),
End
Pontiac Grand Prix (1969-1970), Pontiac LeMans (1964-1965,1968-1970),
Pontiac Tempest (1964-1965,1968-1970)
E-Coated Outer Tie Rod
PFG104-10373 ES441RL Front Outer Chevrolet Camaro (1975-1981), Chevrolet Nova (1975-1979), Pontiac Phoenix (1977-1979)
End
E-Coated Right Inner Tie Front Right Buick Skylark (1975-1979), Chevrolet Camaro (1975-1981), Chevrolet Nova (1975-1979),
PFG104-10375 ES443L
Rod End Inner Pontiac Phoenix (1977-1979)
Chevrolet Chevelle (1971-1973), Chevrolet El Camino (1971-1977),
E-Coated Inner Tie Rod Chevrolet Impala (1977-1985,1994-1996), Chevrolet Monte Carlo (1971-1977),
PFG104-10016 ES2020RLT Front Inner
End Oldsmobile 442 (1971), Oldsmobile Cutlass (1971-1977), Pontiac GTO (1971),
Pontiac Grand Am (1973-1975), Pontiac Grand Prix (1971-1977), Pontiac LeMans (1971-1977)
PFG104-10076 Outer Tie Rod End ES234RL Front Outer Chevrolet Bel Air (1955-1957)
See Chevrolet Bel Air - Front Outer (1958-1962), Chevrolet Chevy II - Front Inner (1962),
PFG104-10138 Tie Rod End ES3121RL
Applications Chevrolet Corvair - Front Outer (1960), Chevrolet Impala - Front Outer (1959-1962)
PFG104-10380 Inner Tie Rod End ES597 Front Inner Chevrolet Bel Air (1958-1964), Chevrolet Impala (1959-1964)
PFG104-10162 Tie Rod End ES323L Front Outer Chevrolet Bel Air (1963-1964), Chevrolet Impala (1963-1964)
Chevrolet Camaro (1968-1969), Chevrolet Chevy II (1968), Chevrolet Nova (1970-1974),
PFG104-10529 Tall Outer Tie Rod End — Front Outer
Pontiac Firebird (1968)
See Chevrolet Chevy II - Front Inner (1963-1967), Chevrolet Corvette - Front Left Inner, Front
PFG104-10162 Tie Rod End ES323L
Applications Right Outer (1963-1982), Chevrolet Corvair - Front Outer (1963-1964)
Chevrolet C10 Truck (1971-1972), Chevrolet Blazer (1971-1972), Chevrolet/GMC Suburban
PFG104-10363 Outer Tie Rod End — Front Outer
(1971-1972), GMC C15/1500 Truck (1971-1972)
PFG104-10371 Outer Tie Rod End — Front Outer Ford Mustang II (1974-1978), Ford Pinto (1973-1980), Mercury Bobcat (1975-1980)

Steering Tie Rod End Adjusting Sleeves

Moog
Part No. Description Ref # Position Vehicle Applications
Chevrolet Caprice (1971-1996), Chevrolet Chevelle (1971-1973), Chevrolet El Camino (1971-1977),
Chevrolet Impala (1971-1985,1994-1996), Chevrolet Monte Carlo (1971-1977), Chevrolet Nova (1975-1979),
PFG105-10035 Billet Aluminum Tie Rod Sleeves — Front
Ford Falcon (1963-1970), Ford Falcon Sedan Delivery (1963-1965), Ford Mustang (1965-1973),
Ford Ranch Wagon (1960-1962), Ford Ranchero (1963-1971), Ford Torino (1968-1971)
Mercury Cougar (1967-1972), Oldsmobile Cutlass (1971-1977), Pontiac Firebird (1969-1981),
PFG105-10035 Billet Aluminum Tie Rod Sleeves — Front Pontiac GTO (1971), Pontiac Grand Am (1973-1975), Pontiac Grand Prix (1962-1968,1971-1977),
Pontiac LeMans (1971-1977)
Chevrolet Camaro (1967-1969), Chevrolet Caprice (1966-1970), Chevrolet Chevy II (1968),
PFG105-10037 Billet Aluminum Tie Rod Sleeves — Front
Chevrolet Impala (1965-1970), Chevrolet Nova (1970-1974), Pontiac Firebird (1967-1968)
Chevrolet Camaro (1982-1992), Chevrolet Chevelle (1964-1970), Chevrolet Chevy II (1962-1967),
Chevrolet El Camino (1964-1970,1978-1987), Chevrolet Malibu (1978-1983),
Chevrolet Monte Carlo (1970,1978-1988),Chevrolet Vega (1971-1977),
PFG105-10036 Billet Aluminum Tie Rod Sleeves — Front
Oldsmobile Cutlass (1964-1970,1978-1981,1985-1987), Pontiac Firebird (1982-1992),
Pontiac Grand Am (1978-1980), Pontiac Grand LeMans (1981-1982),
Pontiac Grand Prix (1969-1970, 1978-1987)
Front Ford Falcon (1964-1965), Ford Falcon Sedan Delivery (1963-1965), Ford Mustang (1965-1966),
PFG105-10004 Tie Rod End Adjusting Sleeve ES2004S
Right Ford Ranchero (1964-1965), Mercury Comet (1965)
PFG105-10050 Billet Aluminum Tie Rod Sleeves — Front Chevrolet Corvette (1963-1982)
Dodge Challenger (1970-1974), Dodge Charger (1966-1972), Plymouth Barracuda (1964-1974),
PFG105-10048 Billet Aluminum Tie Rod Sleeves — Front
Plymouth GTX (1967,1970-1971), Plymouth Roadrunner (1968-1972)
Front
PFG105-10035 Billet Aluminum Tie Rod Sleeves — Ford Falcon (1964)
Right
PFG105-10004 Tie Rod End Adjusting Sleeve ES2004S Front Left Ford Falcon (1965)
PFG105-10035 Billet Aluminum Tie Rod Sleeves — Front Left Ford Falcon (1965)

Suspension Stabilizer Bar Link Kits

Part No. Description Moog Ref # Position Vehicle Applications
Chevrolet Camaro (1970-2002), Chevrolet Caprice (1971-1996), Chevrolet Cavalier (1982-1994),
Chevrolet Chevelle (1973), Chevrolet Chevy II (1968), Chevrolet Corsica (1987-1996),
Chevrolet El Camino (1973-1977), Chevrolet Impala (1971-1985,1994-1996),
PFG113-10010 Sway Bar End Link K5252 Front
Chevrolet Malibu (1973-1977), Chevrolet Monte Carlo (1973-1977), Chevrolet Nova (1970-1979),
Oldsmobile Cutlass (1975-1977), Oldsmobile Cutlass Supreme (1975-1977),
Pontiac Firebird (1970-2002), Pontiac Grand Prix (1973-1977),Pontiac LeMans (1973-1977)
PFG113-10010 Sway Bar End Link K5252 Rear Chevrolet Camaro (1982-2002), Pontiac Firebird (1982-2002)

2023 - 2024 HOT ROD AND EARLY MUSCLE 397

Suspension Ball Joints
Moog
Part No. Description Ref # Vehicle Applications (not all applications listed)
Chevrolet Camaro (1967-1969), Chevrolet Chevelle (1964-1972), Chevrolet Chevy II (1968), Chevrolet El Camino (1964-1972),
E-Coated
Chevrolet Malibu (1964-1967), Chevrolet Monte Carlo (1970-1972), Chevrolet Nova (1970-1974), Oldsmobile 442 (1965-1971),
PFG101-10013 Lower Ball K5103
Oldsmobile Cutlass (1964-1972), Pontiac Firebird (1967-1969), Pontiac GTO (1964-1972), Pontiac Grand Prix (1969-1972),
Joint
Pontiac LeMans (1964-1972), Pontiac Tempest (1964-1970)
Chevrolet Camaro (1967-1969), Chevrolet Chevelle (1964-1972), Chevrolet Chevy II (1968), Chevrolet El Camino (1964-1972),
E-Coated
Chevrolet Malibu (1964-1967), Chevrolet Monte Carlo (1970-1972), Chevrolet Nova (1969-1974), Oldsmobile 442 (1965-1971),
PFG101-10015 Upper Ball K5108
Oldsmobile Cutlass (1964-1972), Pontiac Firebird (1967-1969), Pontiac GTO (1964-1972), Pontiac Grand Prix (1969-1972),
Joint
Pontiac LeMans (1964-1972), Pontiac Tempest (1964-1970)
Chevrolet Camaro (1967-1969), Chevrolet Chevelle (1964-1972), Chevrolet Chevy II (1968), Chevrolet El Camino (1964-1972),
Tall Upper Chevrolet Malibu (1964-1967), Chevrolet Monte Carlo (1970-1972), Chevrolet Nova (1969-1974), Oldsmobile 442 (1965-1971),
PFG101-10016 —
Ball Joint Oldsmobile Cutlass (1964-1972), Pontiac Firebird (1967-1969), Pontiac GTO (1964-1972), Pontiac Grand Prix (1969-1972),
Pontiac LeMans (1964-1972), Pontiac Tempest (1964-1970)
Chevrolet Bel Air (1971-1975,1981), Chevrolet Camaro (1970-1981), Chevrolet Caprice (1971-1996), Chevrolet Chevelle (1973),
E-Coated Chevrolet El Camino (1973-1987), Chevrolet Impala (1971-1985,1994-1996), Chevrolet Malibu (1973-1983),
PFG101-10019 Upper Ball K5208 Chevrolet Monte Carlo (1973-1988), Chevrolet Nova (1975-1979), Pontiac Firebird (1970-1981), Pontiac GTO (1973),
Joint Pontiac Grand Am (1973-1975,1978-1980), Pontiac Grand LeMans (1981-1982), Pontiac Grand Prix (1973-1987),
Pontiac LeMans (1973-1981)
Chevrolet Camaro (1970-1981), Chevrolet Caprice (1971-1996), Chevrolet Chevelle (1973), Chevrolet El Camino (1973-1987),
Chevrolet Impala (1971-1985,1994-1996), Chevrolet Malibu (1973-1983), Chevrolet Monte Carlo (1973-1988),
Tall Upper
PFG101-10020 — Chevrolet Nova (1975-1979), Oldsmobile Cutlass (1973-1981,1985-1987), Oldsmobile Cutlass Calais (1978-1984),
Ball Joint
Pontiac Firebird (1970-1981), Pontiac GTO (1973), Pontiac Grand Am (1973-1975,1978-1980), Pontiac Grand Prix (1973-1987),
Pontiac LeMans (1973-1981)
Chevrolet Camaro (1970-2002), Chevrolet Caprice (1977-1996), Chevrolet Chevelle (1973), Chevrolet El Camino (1973-1987),
E-Coated
Chevrolet Impala (1977-1985,1994-1996), Oldsmobile Cutlass (1973-1981,1985-1987), Pontiac Firebird (1970-2002),
PFG101-10049 Lower Ball K6145T
Pontiac GTO (1973), Pontiac Grand Am (1973-1975,1978-1980), Pontiac Grand LeMans (1981-1982),
Joint
Pontiac Grand Prix (1973-1987)
Chevrolet Chevelle (1964-1972), Chevrolet El Camino (1964-1972), Chevrolet Malibu (1964-1967),
Tall Lower
PFG101-10014 — Chevrolet Monte Carlo (1970-1972), Oldsmobile 442 (1965-1971), Oldsmobile Cutlass (1964-1972), Pontiac GTO (1964-1972),
Ball Joint
Pontiac Grand Prix (1969-1972), Pontiac LeMans (1964-1972), Pontiac Tempest (1964-1970)
Tall Lower Chevrolet El Camino (1978-1987), Chevrolet Malibu (1978-1983), Chevrolet Monte Carlo (1978-1988),
PFG101-10048 —
Ball Joint Oldsmobile Cutlass (1978-1981,1985-1987), Pontiac Grand Prix (1978-1987), Pontiac LeMans (1978-1981)
Right Lower
PFG101-10128 K781 Dodge Charger (1966-1972), Plymouth Barracuda (1970-1974), Plymouth Roadrunner (1968-1972)
Ball Joint
Left Lower
PFG101-10129 K783 Dodge Charger (1966-1972), Plymouth Barracuda (1970-1974), Plymouth Roadrunner (1968-1972)
Ball Joint
E-Coated
Chevrolet C10 Truck (1963-1970), GMC C15/1500 Truck (1967-1970),
PFG101-10036 Lower Ball K6023
Chrevrolet/GMC Suburban (1968-1970), GMC Jimmy (1970)
Joint
E-Coated
Chevrolet C10 Truck (1963-1970), GMC C15/1500 Truck (1967-1970),
PFG101-10037 Upper Ball K6024
Chrevrolet/GMC Suburban (1968-1970), GMC Jimmy (1970)
Joint
E-Coated
Chevrolet C10 Truck (1971-1999), Chevrolet C15 Truck (1975-1978), GMC C15/1500 Truck (1971-1974),
PFG101-10040 Lower Ball K6117T
Chrevrolet/GMC Suburban (1971-1991), Chevrolet K5 Blazer (1975-1982), GMC Jimmy (1971-1982)
Joint
E-Coated
Chevrolet C10 Truck (1971-1972), GMC C15/1500 Truck (1971-1972), Chrevrolet/GMC Suburban (1971-1972),
PFG101-10044 Upper Ball K6124
Chevrolet K5 Blazer/GMC Jimmy (1971-1972)
Joint
Lower Ball Chevrolet C20/C25 Truck (1971-1978), Chevrolet C30 Truck (1975-1986), GMC C35/2500 Truck (1971-1986),
PFG101-10045 K6129T
Joint Chevrolet/GMC Suburban (1971-1986)
E-Coated
Dodge Dart (1963-1972), Dodge Lancer (1961-1962), Plymouth Barracuda(1964-1969), Plymouth Duster (1970-1972),
PFG101-10086 Upper Ball —
Plymouth Valiant (1960-1972), Plymouth Scamp (1971-1972)
Joint
E-Coated
Ford Galaxie 500 (1968-1974), Ford Ranchero (1972-1979), Ford Thunderbird (1967-1979), Ford Torino (1972-1976),
PFG101-10151 Lower Ball —
Mercury Montego (1972-1976), Mercury Cougar (1974-1979)
Joint
E-Coated
Buick Skyhawk (1975-1980), Chevrolet Monza (1975-1980), Chevrolet Vega (1975-1977), Oldsmobile Starfire (1975-1980),
PFG101-10299 Lower Ball —
Pontiac Astre (1975-1977), Pontiac Sunbird (1976-1980)
Joint
E-Coated
PFG101-10301 Lower Ball — Chevrolet Vega (1971-1974)
Joint
Lower Ball Ford LTD (1967-1972), Ford Galaxie 500 (1968-1972), Ford Thunderbird (1967-1972), Lincoln Continental (1970-1972),
PFG101-10302 —
Joint Lincoln Mark III/IV (1968-1972), Mercury Marquis (1967-1972), Mercury Montego (1972), Mercury Monterey (1967-1972)
Lower Ball Chrysler Lebaron (1977-1981), Chrysler Cordoba (1976-1983), Chrysler 300 (1962-1964), Dodge Charger (1973-1978),
PFG101-10369 K719
Joint Dodge Dart (1960-1961), Plymouth Fury (1960-1961, 1975-1978), Plymouth Gran Fury (1980-1989)
E-Coated
PFG101-10384 Upper Ball — Buick Electra (1959-1960), Buick Lesabre (1959-1960), Buick Roadmaster (1958)
Joint

398 2023 - 2024 HOT ROD AND EARLY MUSCLE

Suspension Ball Joints Cont.
Part No. Description Moog Ref # Vehicle Applications (not all applications listed)
E-Coated Lower
PFG101-10385 — Buick Electra (1959-1960), Buick Lesabre (1959-1960), Buick Roadmaster (1958)
Ball Joint
Ford Fairlane (1968-1970), Ford Falcon (1968-1970), Ford Granada (1975-1980), Ford Mustang (1968-1973),
E-Coated Lower
PFG101-10439 — Ford Ranchero (1968-1971), Ford Torino (1968-1971), Mercury Comet (1967-1977), Mercury Cyclone (1968-1971),
Ball Joint
Mercury Cougar (1968-1973)
E-Coated Upper Buick Regal (1978-1987), Chevrolet El Camino (1978-1987), Chevrolet Malibu (1978-1983),
PFG101-10469 Ball Joint, 1" — Chevrolet Monte Carlo (1978-1988), GMC Caballero (1982-1987), Oldsmobile Cutlass (1978-1988),
Taller Stud Pontiac Bonneville (1978-1988), Pontiac Grand Prix (1978-1987)
E-Coated Upper
Chevrolet Bel Air (1955-1970), Chevrolet Biscayne (1958-1970), Chevrolet Corvette (1963-1982),
PFG101-10477 Ball Joint, 1/2" —
Chevrolet Impala (1959-1970)
Taller Stud

Suspension Control Arm and Ball Joint Assemblies

Moog
Part No. Description Ref # Position Vehicle Applications
Polyurethane Lower Control Arm
PFG115-10034 — Front Lower Dodge Challenger (1970-1974), Plymouth Barracuda (1964-1974)
Bushings
Dodge Challenger (1970-1974), Dodge Charger (1966-1972),
Greasable Lower Control Arm Pivot
PFG120-10005 — Front Lower Plymouth Barracuda (1970-1974), Plymouth Cuda (1970-1974),
Shaft Kit
Plymouth Roadrunner (1968-1972)
Greasable Lower Control Arm Pivot
PFG120-10003 — Front Lower Dodge Dart (1965-1976), Plymouth Barracuda (1965-1969)
Shaft Kit

Control Arm Shaft Kits

Moog
Part No. Description Ref # Position Vehicle Applications (not all applications listed)
Offset Upper Chevrolet Camaro (1967-1969), Chevrolet Chevelle (1964-1972), Chevrolet El Camino (1973),
Upper Control
PFG120-10047 Control Arm — Chevrolet Monte Carlo (1973), Oldsmobile Cutlass (1965-1972), Pontiac Firebird (1967-1969),
Arm
Shaft Kit Pontiac GTO (1964-1972), Pontiac Grand Prix (1969-1972), Pontiac LeMans (1964-1972)
Offset Upper Chevrolet Camaro (1970-1973), Chevrolet Chevelle (1973), Chevrolet El Camino (1964-1972),
Upper Control
PFG120-10048 Control Arm — Chevrolet Impala (1971-1973) Chevrolet Monte Carlo (1970-1972), Oldsmobile Cutlass (1973-1977),
Arm
Shaft Kit Pontiac Firebird (1970-1973), Pontiac GTO (1973), Pontiac Grand Prix (1973), Pontiac LeMans (1973)
Control Arm Dodge Dart (1963-1976), Dodge Lancer (1962), Plymouth Barracuda (1964-1969), Plymouth Duster
PFG120-10049 — Front Lower
Shaft Kit (1970-1976), Plymouth Valiant (1962-1976)
Dodge Charger (1966-1972), Dodge Challenger (1970-1974), Dodge 440 (1963-1964),
Control Arm
PFG120-10050 — Front Lower Plymouth Cuda (1970-1974), Plymouth Fury (1962-1964), Plymouth Road Runner (1968-1972),
Shaft Kit
Plymouth Superbird (1970)

2023 - 2024 HOT ROD AND EARLY MUSCLE 399

LS Slant Edge Covers Slant-Edge Die-Cast Valve PFM141-923
These new valve covers are Covers
taller than stock valve covers Small block Chevy cast aluminum valve covers feature
and can accommodate a wide varity of large valve train an innovative mold design that provides spacious inner
applications. Fits GM LS engines only. clearances for roller rockers and stud girdles. Baffles
Part No. Description are removable and rubber grommets are included. Some
PFM141-256 Chevy Black Crinkle with Raised LSX Logo have Chevrolet and bow tie emblems for small block
PFM141-257 Chevy Ornage, Raised LSX Emblem Chevy, 1959-86. Sold in pairs.
PFM141-261 Chevy Orange, Raised Emblem
PFM141-262 Black Crinkle, Raised Emblem Part No. Description
PFM141-263 Cast Gray, Raised Emblem PFM141-920 Polished, Raised Emblem
PFM141-266 Polished, No Emblem PFM141-921 Black Crinkle, Raised Emblem
PFM141-922 Chrome, Raised Emblem
PFM69520 PFM141-923 Metallic Gray, Recessed Blue/Red Emblem
Integrated Coil Brackets PFM141-924 Chevy Orange, Raised Emblem
What to do with those pesky coils in PFM141-925 Cast Gray Crinkle, Raised Emblem
such a confined space? A unique rail PFM141-927 Polished, Recessed Red/Black Emblem
mounting system attaches to the PFM141-928 Black Crinkle, Recessed Red/Black Emblem
threaded holes on the valve cover, PFM141-930 Chrome, Recessed Red/Black Emblem
and the individual coils attach to PFM141-931 Yellow, Raised Emblem Milled
the rail so they can be mounted in PFM141-939 Powder Coat Ready, Raised Emblem
multiple positions. All necessary
hardware included. Late Model Die-Cast
Part No. Description Valve Covers
PFM69520 Coil Bracket for LS 1 Style Coils 1987-up small block Chevy
PFM69521 Coil Bracket for LS 3 and 7 Style Coils centerbolt design, tall valve covers are manufactured
from rigid, die-cast aluminum. Supplied with mounting
Slant-Edge Valve Covers bolts, stainless steel and rubber washers (available
Small block center-bolt valve separately below). All valve covers include baffle and
covers feature generous internal grommets. 2-9/16" tall. Sold in pairs.
clearance for larger valve train Part No. Description
setups and raised/recessed PFM141-840 PFM141-130 Polished with Baffle
logos. Tall with removable PFM141-131 Black Crinkle with Baffle
baffles and mounting hardware included. PFM141-132 Chrome with Baffle
Replacement Bolt and Washer Kit for Centerbolt Design Valve
Part No. Description PFM141-133
Covers (PFM141-130, PFM141-131, and PFM141-132)
PFM141-840 Black Crinkle, Raised Logo
PFM141-843 Polished, Recessed Red/Black Logo PFM141-102
PFM141-845 Black Crinkle, Recessed Red Logo Stamped Steel Valve
Covers
Chevy Bowtie Chevrolet script and bow
Slant-Edge Aluminum Breather Caps tie items have always been
These new slant- popular with hot rodders. Made to General Motors
edge aluminum specifications, the quality is great! Sold in pairs.
push-in breather Part No. Description Finish/Color
caps are available Small Block Chevy, Short
in five different PFM141-102 With Baffle, Bow Tie Logo Chrome
finishes with just PFM141-750 With Baffle, Red Bow Tie Emblem Black Crinkle
With Baffle, Red Bow Tie Emblem/
about every bowtie emblem configuration imaginable: PFM141-899
Black Chevrolet Lettering
Chrome
raised and milled, recessed with inlaid paint, the unique Small Block Chevy, Tall
recessed/raised blackfield, even no emblem at all. The PFM141-101 Without Baffle, Bow Tie Logo Chrome
2.5" diameter cap fits a 1.22" hole. Grommet not included. PFM141-103 With Baffle, Bow Tie Logo Chrome
Part No. Description PFM141-751 With Baffle, Red Bow Tie Emblem Black Crinkle
PFM141-850 No Emblem, Polished With Baffle, Red Bow Tie Emblem/
PFM141-905 Chrome
PFM141-851 No Emblem, Chrome Black Chevrolet Lettering
PFM141-852 Recessed Black Bowtie Emblem, Chrome Small Block Chevy, 1987-Up
PFM141-853 Recessed Red Bowtie Emblem, Chrome Centerbolt Design,
PFM141-107 Chrome
PFM141-854 Recessed Black Bowtie Emblem, Polished Short With Baffle, Red Bow Tie
PFM141-855 Recessed Red Bowtie Emblem, Polished PFM141-907 Centerbolt Design, Short With Baffle Black Crinkle
PFM141-856 Blackfield Bowtie Emblem, Chrome Big Block Chevy, Short
PFM141-857 Blackfield Bowtie Emblem, Polished PFM141-114 With Baffle, Bow Tie Logo Chrome
PFM141-858 Raised Bowtie Emblem, Black Crinkle PFM141-810 With Baffle Black Crinkle
PFM141-859 Raised Bowtie Emblem, Chevy Orange With Baffle, Red Bow Tie Emblem/
PFM141-812 Chrome
Black Chevrolet Lettering
PFM141-860 Raised Bowtie Emblem, Cast Gray Crinkle
Big Block Chevy, Tall
PFM141-861 Recessed Red Bowtie Emblem, Black Crinkle
PFM141-811 With Baffle Black Crinkle
PFM141-862 No Emblem, Black Crinkle
With Baffle, Red Bow Tie Emblem/
PFM141-813 Chrome
Black Chevrolet Lettering

400 2023 - 2024 HOT ROD AND EARLY MUSCLE

Die-Cast Valve Covers Street Performance Chrome Series
Die-cast valve covers
are manufactured to GM
specifications, with internal oil PFM141-140
drippers, GM designed baffles,
and attractive Bow Tie and Chevrolet emblems. Sold in
pairs. PFM141-900

Part No. Description

PFM141-108 Small Block Chevy Polished for 1959-86 1959-86 small block Chevy kit components.
Small Block Chevy Black Crinkle for 1959-86, Part No. Description
PFM141-116
Recessed Emblem Full Kit Includes a 14" Chrome Air Cleaner, Two Tall Baffled
Small Block Chevy Chrome Plated for 1959-86, PFM141-900 Valve Covers, Timing Chain Cover, Chrome Valve Cover
PFM141-117
Recessed Emblem Breather, (8) Wing Nuts, and (8) Hold-Downs
Small Block Chevy Orange, Recessed Emblems, PFM141-616 Chevy Bow Tie Push-In Breather
PFM141-118
Black Lettering and Bowtie Emblem Chevy Bow Tie Wing Nuts with Black and Red Emblems,
PFM141-119 Small Block Chevy Black Crinkle, Raised Emblem PFM141-902
4 Pcs.
PFM141-120 Small Block Chevy Orange, Raised Emblem Chevy Bow Tie Hold-Downs with Black and Red Emblems,
PFM141-903
PFM141-140 Big Block Chevy Chrome Plated, Recessed Emblem 4 Pcs.
PFM141-904 Chevy Bow Tie Timing Chain Cover
Two-Piece Die-Cast Polished PFM141-905 Chevy Bow Tie Valve Covers, Tall, Black and Red Emblems
PFM141-906 Chevy Bow Tie 14" Chrome Air Cleaner
Aluminum Valve Covers
PFM141-615 Carbon-Style Kits
Two-piece tall, small block valve covers Charcoal-colored carbon fiber
with the popular Chevrolet and bow is one of the most popular
tie emblems. Easily check valve materials used in manufacturing
train while the engine is running. today because of its strength
The diagonal cut of the top section and attractive looks. Proform's
ensures no mess. Each valve cover new carbon-style engine dress-
features oversize bolts for fast removal, a top and up products are stamped steel
bottom section, and a retained gasket for a tight seal. parts with a carbon fiber film
Will clear roller rockers and stud girdles. Valve covers adhered to the exterior surface
come equipped with baffle and grommets. Fits 1959-86 to give the parts the look
engines. 2-9/16" tall. Sold in pairs. customers crave at a reasonable
Technical Note: Will not fit cylinder head 12340034 or similar (with three rectangular raised price with the strength of steel.
internal sections near the valve cover mounting surface), unless such sections are milled off. Part No. Description
Chevy 14" Classic, Carbon-Style
PFM141-713
Chevrolet High-Tech Collector’s Series Air Cleaner Kit with Bowtie Center Nut
PFM141-361 PFM66013 3" Carbon-Style Push-In Air Breather Cap
Small block Chevy
stamped steel bolt-
on components are Black Crinkle Series
electrostatically Distinctive, durable,
painted and baked and one of the most
with durable high- popular dress-up kits
tech gray epoxy, finished with Bow Tie and Chevrolet available for 1959-86
emblems. small block Chevy.
Both SBC and BBC
Part No. Description
Bow Tie Timing Chain Cover for 1969-91 SB Chevy V8
components are also
PFM141-363
and V6-90° Engines available individually.
Bow Tie Valve Cover Wing Nuts for SB, BB, Part No. Description
PFM141-364
and V6 Chevy Engine, 4 Per Pack Full Kit Including One Set of Valve Covers,
PFM141-758 14" Air Cleaner, Timing Chain Cover, Breather Cap,
(8) Wing Nuts, and (8) Hold-Down Clamps
PFM141-750 Chevy Bow Tie, Short Baffled Valve Covers
PFM141-751 Chevy Bow Tie, Tall Baffled Valve Covers
PFM141-752 Chevy Bow Tie Classic 14" Air Cleaner
Chevy Bow Tie Black Timing Chain Cover,
PFM141-753
1966-91 Small Block
PFM141-754 Chevy Bow Tie Push-In Air Breather Cap, 3" Dia.
Chevy Bow Tie Wing Nuts, Small Block and Big Block,
PFM141-756
4 Pcs.
Chevy Bow Tie Valve Cover Hold-Down Clamps, Small Block
PFM141-757
and Big Block through 1986, 8 Pcs.
Chevy Bow Tie Black Timing Chain Cover, 1965-1990 Big
PFM141-219
Block, Includes Oil Seal

2023 - 2024 HOT ROD AND EARLY MUSCLE 401

Chevy Orange Kits Valve Cover Wing Nuts
The complete kit includes an The Bow Tie emblem is cut
air breather, two tall baffled sharply into the top of each wing
valve covers, timing chain chain nut. The lower ends of the shafts
cover, 14-inch air cleaner, eight are manufactured with wide shoulders for broad load
mini nuts, and eight hold-downs distribution. Each wing nut is supplied with a separate
bearing the popular Chevrolet stud which permits precise gasket positioning on the
and Bow Tie Emblems in black. head prior to mounting the valve covers. Fits Chevrolet
Part No. Description small and big block, and V6 with 1/4" x 20 threads. Four
Full Kit. Includes One Set of Tall Valve Covers, per package.
PFM141-780 Air Cleaner Kit, Timing Chain Cover, Breather Cap,
(8) Hold-Down Clamps, and (8) Mini Nuts Part No. Description
PFM141-364 Metallic Gray
Valve Covers, Chevy Bowtie, Orange,
PFM141-784 PFM141-600 Chrome
Tall with Tall Baffle, Chevy SB
Chevy 14" Classic, Orange Air Cleaner Kit with Bowtie PFM141-756 Black Crinkle
PFM141-785 PFM141-902 Chrome with Red Bow Tie
Center Nut
PFM141-786 Chevy Bowtie Push-In Air Breather Cap, Orange, 3" Dia.
PFM141-783
Chevy Bowtie Timing Chain Cover, Orange, Grommet Set
1966-91 Small Block
Chevy Bowtie Valve Cover Hold-Down Clamps, PFM141-615
PFM141-782**
Orange, SB and BB, V-6/90° through 1986 Set includes one grommet for push-in air
PFM141-601**
Chevy Bowtie Valve Cover Mini Nuts, breather and one grommet for PCV valve.
Orange, SB and BB, V-6/90° through 1986
Chevy Bowtie Timing Chain Cover, Orange,
PFM141-220
1965-90 Big Block Valve Cover Mini Nuts
** Package contains 4 pieces. Order 2 packages per engine. Custom valve cover mini
nuts feature a Bow Tie
logo on the top of each
Shark Gray Series fastener. Separate studs are
The shark gray finish is the included for precise gasket
latest from Chevrolet, and positioning. The wing nuts fit Chevrolet big block, small
features striking inset logos block, and V6 cylinder heads. Sold four per package.
in Chevrolet red. Available as
a full kit, or as individual SBC Part No. Description
PFM141-601 Chevy Orange
and BBC components. PFM141-759 Black Crinkle
Part No. Description PFM141-909 Chrome with Red Bow Tie
Full Kit Including One Set of Valve Covers,
PFM141-880
14" Air Cleaner, Timing Chain Cover, Breather Cap, PFM141-903
(8) Wing Nuts, and (8) Hold-Down Clamps
Valve Covers, Chevy Bowtie, Shark Gray,
PFM141-881
Tall with Tall Baffle, Chevy SB Valve Cover
PFM141-882
Chevy 14" Classic, Shark Gray Air Cleaner Kit with Bowtie
Center Nut
Hold-Down Clamps
PFM141-884 Chevy Bowtie Push-In Air Breather Cap, Orange, 3" Dia. Fits small block Chevy stamped
Chevy Bowtie Valve Cover Hold-Down Clamps, valve covers, V8 and V6 90° engines
PFM141-885** through 1986. Four per package.
Shark Gray, SB and BB, V-6/90° through 1986
Chevy Bowtie Valve Cover Mini Nuts, Part No. Description
PFM141-886**
Shark Gray, SB and BB, V-6/90° through 1986 PFM141-610 Chrome
Chevy Bowtie, Shark Gray, Valve Covers, PFM141-757 Black Crinkle with Red Bow Tie
PFM141-888
Tall with Baffle, 1965-1990 Chevy Big Block PFM141-903 Chrome with Red Bow Tie
Chevy Bow Tie, Shark Gray Timing Chain Cover, 1965-1990
PFM141-889
Big Block, Includes Oil Seal
** Package contains 4 pieces. Order 2 packages per engine.
Breather Caps
Push-in, three-inch diameter air
breather caps are embossed on
Small Block Chevy Engine the top with a Bow Tie emblem to
Dress-Up Kits match the genuine factory-parts
PFM141-616 PFM141-754
Includes Chevrolet Bow Tie appearance of the engine. For
logo valve covers, timing use in valve covers with grommets fitting 1.22" holes.
cover, wire looms, breather, Part No. Description
dipstick, timing tab, and PFM141-616 Chrome
grommets. For 1959-86 small PFM141-754 Black Crinkle
block Chevys.
Part No. Description Freeze Plug Inserts
PFM141-001 Chrome Steel
PFM141-758 Black Crinkle Steel
PFM141-233
PFM141-900 Street Performance Chrome Give the engine block the ultimate
trick look with machined billet
aluminum freeze plug inserts featuring a recessed red
Bow Tie emblem. Package of 2.
TECHNICAL NOTE: This is not a freeze plug replacement.

402 2023 - 2024 HOT ROD AND EARLY MUSCLE

Filtered Air Timing Chain Covers and Pointers
Breathers
Push-in filtered
air breathers, with
the raised Bow Tie
PFM141-614 PFM141-621 PFM141-622 PFM141-200
emblem stamped
prominently in the top, are offered in two styles: with
the heat-shield hood and without. Breathers are 3" in
diameter and fit valve covers with 1.22" holes. PFM141-363

Part No. Description

PFM141-614 Black Crinkle, without Hood Part No. Description
PFM141-621 Push-In Filter, with Hood Timing Covers
PFM141-622 Push-In Filter, without Hood PFM141-215 1969-91,SB Chevy and V6/90°, Chrome
PFM141-216 1965-90 BB Chevy, Chrome
1969-91, SB Chevy and V6/90°, Metallic Gray, Blue Bow Tie,
Push-In Oil Filler Cap PFM141-363
Red Chevrolet
PFM141-630 PFM141-753 1969-91, SB Chevy, Black Crinkle
PFM141-904 1969-91, SB Chevy, Chrome, Red Bow Tie, Black Chevrolet
Chevrolet Bow Tie embossed and raised on
Timing Pointers
top. For valve covers with 1.22" diameter PFM141-200* 1969-91,SB Chevy V8 or V6/90° with 6-3/4" or 7" Balancer
hole. PFM141-201 1965-90, BB Chevy with 8" Balancer
PFM141-202* 1965-90, SB Chevy V8 or V6/90° with 8" Balancer
Ignition Wire Looms * TECHNICAL NOTE: May be used for some pre-1969 engines by relocating top dead center on
the balancer.
PFM141-636
Red Chevrolet and Bow Tie
emblems are molded onto the black
Air Cleaner
nylon head of each wire loom. Looms are Wing Nuts
mounted on chrome stems. Fit Chevrolet A nice addition PFM141-322 PFM141-328 PFM141-327
1959-86 small block V8 and Chevrolet 1965-90 to any hot rod.
big block V8. 4-wire looms, two per package. Nuts have 1/4"-20 threads. Small nuts are 1-1/2" dia. Large
nuts are 2-1/4" dia.
Linear Ignition Wire Looms Part No. Description
PFM141-322 Bow Tie, Small
Using the valve cover
PFM141-323 Hi-Tech Bow Tie, Large
mounting bolts, these
PFM141-327 Hi-Tech GM, Large
handsome Chevrolet PFM141-328 Hi-Tech Bow Tie, Small
PFM141-638
chrome looms are PFM141-332 Hi-Tech GM, Small
positioned along PFM141-333 Bow Tie, Large
the valve cover to PFM141-369 Bow Tie, Large, Black Crinkle
hold the wires in a neat parallel
arrangement. X-Large Air Cleaner Wing Nuts
Part No. Description These custom designed Chevy bowtie and GM emblem air
PFM141-638 1959-91, Small Block Chevy V8, Chrome Finish cleaner wing nuts are available in three different versions.
PFM141-639 1965-96, Big Block Chevy, Chrome Finish The aluminum wing nuts are manufactured to fit both
PFM141-709 1965-96, Big Block Chevy, Black Crinkle Finish w/Red Logo
1/4"-20 and 5/16"-18 carburetor studs. 5-5/8"W x 3/4"H.
Chrome Oil Dipstick Kits
PFM141-553

Part No. Description

PFM141-335 Bowtie Emblem, Black Crinkle/Red
Kits include dipstick and tube and are available for PFM141-336 Bowtie Emblem, Large Chrome/Gold
small and big block Chevrolet. Dipsticks have classic PFM141-339 Bowtie Emblem, Black Crinkle/Black
hook handles and the Chevy logo stamped near the fill
indicator mark. Classic 14" Air Cleaner Kits
Part No. Description Classic air cleaners are supplied
PFM141-550 1977 & Earlier, Chevrolet Small Block V8 with genuine GM (AC) air filter
PFM141-551 1978-81, Chevrolet Small Block V8 elements for maximum airflow and
PFM141-553 1965-90, Chevrolet Big Block V8
a choice of Chevrolet logo. Each
includes mounting hardware (stud
and gasket).
Part No. Description
PFM141-302 Chevrolet Logo On Top And Bow Tie Nut, Chrome
PFM141-307 High Performance Air Cleaner, Plain Finish and Wing Nut
PFM141-906 Black Crinkle with Bow Tie
PFM141-752 Black Crinkle, Bow Tie Nut, Red Chevrolet Inlaid

2023 - 2024 HOT ROD AND EARLY MUSCLE 403

Super-Light Aluminum 14" Air Cleaners S-Blade 15" Universal Fan
Available with or without the famous
Bow Tie and Chevrolet emblems, with Thermostat
in clear anodized or black, Super- PFM67029
Light 14" air cleaners offer good Your stock fan robs your engine
looks and excellent air flow for of up to 15 or more horsepower!
maximum performance. All have Replace it with a rugged fan
super-deep aluminum bases for hood equipped with an adjustable 180°-
clearance with high-rise manifolds. 240°F thermostat. Bolts to your
Part No. Description radiator supports using sturdy
PFM141-690 14" Black Aluminum Air Cleaner, No Logo brackets. With a heavy-duty motor,
PFM141-692
14" Black Aluminum Air Cleaner, and 15” diameter, this unit pulls up to 2,800 CFM of air,
Bow Tie and Chevrolet Logos cooling vehicles with up to 250+HP (without air) and 220+
14" Clear Anodized Aluminum Air Cleaner,
PFM141-693 HP (with air). Overall: 18” x 16-1/8” x 4”. Draw: 14 amps.
Bow Tie and Chevrolet Logos
Note: Always lower the hood slowly to confirm clearance. The 14" air cleaner kits have 3" tall
filter and bases are recessed for a low profile and hood clearance. Minimum clearance of 3-3/4"
is required from the top of the carburetor to the underside of the hood. Adjustable Electric Fan
Controller
Slant-Style This adjustable fan
controller allows you to set
Aluminum Air Cleaners fan activation. Adjustable
These 14" x 3" low-profile air cleaner between 150 - 240°F.
assemblies with Chevrolet Bow Tie, Part No. Description
raised or recessed emblems and PFM69598 Thread-In Probe, 3/8” NPT
logos are a great way to dress up PFM69599 Push-In Probe
any engine compartment. Each kit
contains all necessary hardware needed for installation.
Part No. Description
PFM141-830
Chevrolet Script and Bow Tie Emblem, Black Crinkle, Bow Tie Electric Water Pumps
Raised Emblem
Eliminate unnecessary weight
Chevrolet Script and Bow Tie Emblem, Chevy Orange,
PFM141-831 and high RPM impeller drag
Raised Emblem
Chevrolet Script and Bow Tie Emblem, Polished, Recessed
which can rob horsepower.
PFM141-833
Red and Black Emblem Electric water pumps can
Chevrolet Script and Bow Tie Emblem, Black Crinkle, move up to 35 gallons per
PFM141-834
Recessed Red Emblem minute and increase cooling
PFM141-835
Chevrolet Script and Bow Tie Emblem, Chrome, Recessed dramatically. Durable die-cast aluminum pumps have
Red and Black Emblem polished, chrome or epoxy powder coated finishes.
Pumps have a bright red Bow Tie emblem imprinted. 1"
High-Performance pipe to 1-3/4" hose fitting included.
Electric Fans Part No. Description
These fans help prevent Small Block Chevy
overheating in stop-and-go PFM141-651 Black
Big Block Chevy
traffic. Designed to fit the most
PFM141-674 Black
popular cars and trucks, ithey
help increase gas mileage,
improve engine performance, Fuel Pump
and free the water pump pulley Block-Off Plates
for more RPM. Install in minutes For use on Chevrolet V8.
with simple hand tools. Stamped with the Chevrolet
Part No. Description Bow Tie, these plates include
PFM141-210 PFM141-211
PFM67011 10" Electric Fan, S-Blade, 1000 CFM gaskets.
PFM67013 12" Electric Fan, S-Blade, 1200 CFM Part No. Description
PFM67027 16" Electric Fan, S-Blade, 2100 CFM PFM141-210 Small Block Chevy
PFM67010 10" Electric Fan, Straight Blade, 1000 CFM PFM141-211 Big Block Chevy
PFM67012 12" Electric Fan, Straight Blade, 1200 CFM
PFM67014 14" Electric Fan, Straight Blade, 1650 CFM
PFM67016 16" Electric Fan, Straight Blade, 2100 CFM

404 2023 - 2024 HOT ROD AND EARLY MUSCLE

 PFM141-500
Water Necks Chevy Racing Distributor with Coil
Chevrolet water necks utilize neoprene A distributor with a 50,000 volt coil that
O-ring gaskets instead of regular gaskets, produces spark through 7,500 RPM with
eliminating leakage. Supplied with chrome true spark alignment for instantaneous
bolts. response. High-performance curve, a
Part No. Description premium cap with brass terminals, and
PFM141-501 1966-75 Chevrolet, Camaro, and Chevelle V8s a low-saturation ignition module are
included. Die-cast aluminum housing is
Alternators available polished, except where noted.
Chrome alternators are 100% new with Fits all 1955-82 Chevy V8.
no rebuilt parts. They have machined Part No. Description
pulleys, red Chevy Bow Tie emblems, PFM66941BK Polished Distributor With Black Cap
and individually prepared operating PFM66941BKU Unpolished Distributor With Black Cap
performance graphs for a new level of
functionality. Conversion Ignition Kits
Part No. Description Convert old points-style ignition
PFM141-659 80-Amp Alternator to modern electronic ignition. Kit
PFM141-657 100-Amp Alternator includes distributor with high-
PFM141-660 120-Amp Alternator performance advance curve,
electronic control unit, wiring
GM Performance harness, ballast resistor, and
Parts Licensed Distributors instructions.
Distributor's sintered steel weights, Part No. Description
melonized gears, and validated harnesses PFM66991 273, 318, 340, 360
and capacitors provide reliable energy PFM66993 361, 383, 400
PFM66995 413, 426W, 440, 426 Hemi
flow and long life. Adjustable vacuum
advance allows fine tuning to improve
performance and eliminate potentially Distributor Clamps
harmful detonation. Fits all Chevrolet V8 Aluminum clamps keep the distributor on
(except 348-409) standard deck height. Chevy V8s locked in place.
HEI coil is included. Available with red or Part No. Description
black caps PFM66985 Billet Look Distributor Clamp
PFM66986 Blue Anodized Distributor Clamp
Part No. Description
PFM141-682 Black Cap HEI Distributor with Coil PFM66987 Red Anodized Distributor Clamp
PFM141-683 Red Cap with HEI Distributor with Coil
Harmonic Balancer Covers
GM HEI Street/ Proform balancer covers have etched
timing marks and are available in chrome
Strip Distributors and billet-look finishes. Offered for
Units offer calibrated advance curves V8s with 6-3/4" or 8" diameter harmonic
that are optimized for maximum balancers.
combustion efficiency and to eliminate
detonation. Each unit includes a high- Part No. Description
PFM66517CC 6-3/4" Chrome Balancer Cover
power coil, high-dielectric red cap with PFM66518CC 8" Chrome Balancer Cover
brass terminals, and a low-saturation
ignition module.
Part No. Description
PFM67080 Chevy V6, 262 CID
Electric Water Pumps
PFM67081 Chevy Inline 6 Cylinder
PFM66953 Pontiac V8
Cast aluminum pumps can supply over
PFM66955 Oldsmobile V8 35 gallons of water per minute and
are available in chrome, blue, black,
Chevy HEI High-Performance red, and polished versions for race or
street use. 1" pipe to 1-3/4" hose fitting
Distributor included.
PFM66940 Finish/ PFM66225B
Buy a 100% brand new distributor at an Part No. Color Part No. Finish/Color
Chevy Small Block Chevy Big Block
affordable price for 1955-up small and big block PFM66225P Polished PFM68230P Polished
Chevy. Coil not included, use PFM66943C. PFM66225B Blue PFM68230B Blue
PFM66225BK Black PFM68230BK Black
PFM66225R Red PFM68230R Red
Ford Small Block
PFM68220B Blue
PFM68220BK Black
PFM68220R Red

2023 - 2024 HOT ROD AND EARLY MUSCLE 405

Street Series Carburetors Direct Replacement
High-quality, die-cast Holley Main Bodies
aluminum fuel bowls have Add 25-50 horsepower in less than 30
fuel level windows for quick minutes. Direct replacement, 100%
visual reference. Float level new main bodies have adjustable,
adjustments do not require sight screw-in air bleeds and horsepower
plug removal, eliminating fuel down leg boosters. Available to fit 650, 700, 750, 800,
spillage. Bowls have 3/8" inverted 850, and 950 CFM Holley carburetors.
flare fuel inlet fittings and will accept all conventional Part No. Description
dual feed fuel lines compatible with Holley® carburetors. For Holley 650 CFM (Model 4777), 700 CFM (Model 4778),
Carburetors have provisions for a choke assembly and PFM67100C 750 CFM (Model 4779) and 800 CFM (Model 4780), Double
changeable idle air bleeds for easy calibration changes. Pumper, Mechanical Secondaries
PFM67101C For Holley 750 CFM (Model 3310), Vacuum Secondaries
Part No. CFM
Mechanical Secondary For Holley 850 CFM, Double Pumper,
PFM67107C
Mechanical Secondaries
PFM67212 650
PFM67213 750
PFM67214 850 Chrome Alternators
Easily identified by their machined
Mechanical Secondary Race pulleys, 100% new alternators cost
no more than a rebuilt. Each unit is
Series 4-Barrel Carburetors supplied with a quality assurance graph
Affordable, high-performance documenting its performance.
carburetors are hand assembled
in the U.S. using Proform Part No. Description
PFM66445N GM, 60 AMP, 1973-86 Internal Regulator
components. Each carburetor PFM66445.1N GM 100 Amp, 1-Wire
includes a high-flow main body, PFM66445.6N GM 60 Amp, 1-Wire
and billet metering blocks and PFM66445.8N GM 80 Amp, 1-Wire
throttle base plates. Carburetors
have power valve blow-out protection, GM Delco Style 1-Wire
down-leg style boosters, adjustable screw-in air bleeds,
timed and full vacuum ports, and welded throttle shafts. 100-Amp Alternators
Proform alternators are assembled
Part No. CFM
PFM67199 650
using 100% new components and
PFM67200 750 machined V-belt pulleys. Before
PFM67201 850 packaging, they are completely
tested. Delco style 1-wire is an easy
Billet Throttle Base Plates hook-up for any 12-volt application.
Billet base plates are Part No. Description
stronger and more durable PFM66434 GM 100-Amp Alternator, Natural FInish
than die-cast base plates. PFM141-662 GM 100-Amp Alternator, Black Crinkle FInish
Base plates include timed
and full vacuum ports, Mini-Alternators
adjustable secondary air PFM66432
flow cam brackets, button These small but powerful 1-wire
head Torx throttle plate screws alternators weigh just six lbs. and
and power valve blow-out protection. produce over 50 amps. Manufactured
Part No. Description with 100% new components including
PFM67155 650/700/750/800 CFM Replacement Base Plate machined V-belt pulley. Available in
PFM67156 850 CFM Replacement Base Plate black crinkle finish.

Billet Metering Block GM Delco Style 1-Wire 160-Amp Alternator

PFM67150C PFM66430.16BK
Block has changeable idle feed
Proform alternators are assembled
restrictions and other racing
using 100% new components and
upgrades to enhance performance.
machined V-belt pulleys. Delco
Machined from solid aluminum to
CS130 case-style alternator with
eliminate porosity and warping. Fits
1-wire hook-up and available PLFS
Holley 4777, 4779, and 3310 series carbs.
terminal is suitable for small block
and big block Chevy applications.
Black crinkle finish.

406 2023 - 2024 HOT ROD AND EARLY MUSCLE

Mini-Alternators No-Mess Funnel
These small but powerful 1-wire PFM68068
alternators weigh just six lbs. and The funnel’s patented “ball-n-hook”
produce over 50 amps. Manufactured design stops flow and keeps excess
with 100% new components including fluid inside the funnel.
machined V-belt pulley. Available in
chrome or black crinkle finish. No-Mess Oil Pan Drain Plug
PFM66960
Part No. Description
PFM66431 GM 50-Amp Alternator, Chrome FInish
1/2"-20 plug has a rubber extension that acts as
PFM66432 GM 50-Amp Alternator, Black Crinkle FInish a sealing “cork”. As the plug is unscrewed the
“cork” seals the drain hole, reducing mess and contact
Ford 1-Wire 100-Amp Alternator with hot oil. A firm tug releases the oil.
PFM66448.1F
Using a modified GM 10si design, this
Soft Conforming Aluminum
all-new 100-amp alternator with 1-wire 3" Collector Gasket Kit
hook-up is designed to fit 1962-1987 PFM67927
Ford 260-460 CID V8 engines. Black Easily conforms to the collector flanges
crinkle finish. for a superior seal. Comes with two
gaskets and six nuts and bolts.

Small Block Chevy

Aluminum Header Gasket Kit
Mini Starters PFM66259
PFM67921
Compact starters have 40-50% more Easily conforms to the
torque and 3.75 gear reduction drive. header flanges for a
Part No. Description superior seal. Comes
PFM66256 Plain, SB and BB Chevy with 153- or 168-Tooth Flywheels with two gaskets. Fits
PFM66259 Chrome, SB and BB Chevy with 153- or 168-Tooth Flywheels all small block Chevy,
PFM66270 Plain, Small Block Ford with Automatic Transmission square port.

Chevy High-Compression Perfect Launch Aluminum

Racing Starters Adjustable Rear End Cover
For engines with large displacement or The reinforced, lightweight aluminum
high compression ratios. Gear reduction rear end cover strengthens the rear
starters have 100% new components. housing case. Each cover increases
4.4:1 ratio, and are capable of cranking lube capacity and includes two bolts
engines with an up to 18:1 compression ratio. to stabilize bearing main caps. Covers
Part No. Description are fitted with a magnetic drain plug
PFM67050 Chevrolet, 168-Tooth Flywheel/Flexplate and a fill plug. All have a black painted finish.
PFM67052 Chevrolet, 168-Tooth Flywheel/ Flexplate, Staggered Mount
Part No. Description
PFM69502 GM 12-Bolt Rear End Cover, Adjustable
Chrysler Starter PFM69501 Ford 8.8 Rear End Cover, Adjustable
PFM66269 PFM69504 Dana 60 Rear End Cover, Adjustable

Lightweight, high-torque starter fits all

Chrysler V6 and V8 applications. Offers
increased header and oil pan clearance.
Chevy Bowtie Differential Covers
These black crinkle-coated
Adjustable RPM Shift Lights differential covers are manufactured
Shift lights allow setting the desired from lightweight aluminum with
shift points without a tachometer or an officially licensed GM Bowtie
RPM modules. May be set from 3,000 to logo. Designed to strengthen the
12,000 RPM. rear housing case and stiffen main
cap area. Covers include two main
Part No. Description
PFM67005C Black bearing cap bolts, fluid capacity plug, magnetic drain
PFM67005SC Silver plug and Grade 8 mounting bolts.
Part No. Description
PFM141-695 Chevy Bowtie Differential Cover, GM 7.5" 10 Bolt
PFM141-696 Chevy Bowtie Differential Cover, GM 8.2"/8.5" 10 Bolt
PFM141-697 Chevy Bowtie Differential Cover, GM 12 Bolt

2023 - 2024 HOT ROD AND EARLY MUSCLE 407

Wedge-Locking Header Bolts Socket Assist
Put an end to loose
header bolts, once and PFM67575
for all. Wedge-Locking Use Socket Assist with a box
header bolts incorporate wrench and 12-point socket to
specialized, super- turn fasteners in areas with no
hardened washers with clearance for a ratchet. Includes set of three (1/4" x 1/4",
external teeth that grip and secure the bottom of the 1/4" x 3/8", and 3/8" x 3/8").
bolt head to the surface of the header. Fasteners require
no special locks; simply torque to 28+ ft./lbs. Fasteners Mopar 1-Wire 110-Amp Alternators
may be removed in the normal manner with a wrench, Assembled using 100% new components
lubricated, and reused. and machined V-belt pulleys, ProForm
Part No. Description alternators feature a 1-wire hookup and
PFM66751 Wedge-Locking Header Bolts, 3/4"L X 3/8", 12 Pcs. internal regulator. For Chrysler square
PFM66752 Wedge-Locking Header Bolts, 3/4"L X 3/8", 16 Pcs. back OEM-style (1960-1987) V8 & Slant
PFM66753 Wedge-Locking Header Bolts, 1"L X 3/8", 12 Pcs. Six. Available in satin,black crinkle, or
PFM66754 LS Engines, Nickel-Plated, .984" L x 8mm Thread, 12 Pcs. chrome finish.
PFM66755 LS Engines, Nickel-Plated, 1.181" L x 8mm Thread, 12 Pcs.
PFM66756 Universal Application, Black Oxide 1" L x 3/8" Thread, 16 Pcs. Part No. Description
PFM440-471 Mopar 110-Amp Alternator, Satin FInish
PFM440-472 Mopar 110-Amp Alternator, Black Crinkle FInish
Mustang High-Performance Components PFM440-473 Mopar 110-Amp Alternator, Chrome FInish
Heavy-Duty Control Arms
PFM68070 Black Crinkle Mopar Engine Dress-Up
Engineered to fit Components
popular 1979- Customize Mopar engines with
98 Mustangs, these officially licensed Mopar
heavy-duty upper accessories and components
and lower control arms, fabricated from .120" wall steel, designed for a factory fit
eliminate wheel hop and aid traction. with a custom look. Black
crinkle finish with blue Mopar
emblem.
Small Block Ford Part No. Description
Small Block Mopar/Universal
Street and Strip Oil Pan Engine Dress-Up Kit with Tall Baffled Valve Covers, 14" Air
Designed for 1981-93 Mustang, T-Bird, PFM440-758 Cleaner, Push-In Breather, (2) Valve Cover Grommets, and
and Cougar. The small block Ford rear (10) Valve Cover Nuts. For Small Block (LA) Mopar Engines.
sump style oil pan is 8-1/4” deep with a PFM440-339 Deluxe Air Cleaner Nut
seven-quart capacity and is zinc iridite PFM440-751 Stamped Steel Tall Valve Covers with Baffles for SBM. Pair
finished. PFM440-752 Classic 14" Air Cleaner
PFM440-754 Push-In Breather Cap
Part No. Description PFM440-756** Valve Cover Wing-Nuts, Pack of 4
PFM68050 Small Block Oil Pan
PFM440-830 Slant-Edge 14" Air Cleaner with Raised Silver Logo
PFM68051 Pick-Up for PFM68050
PFM440-834 Slant-Edge 14" Air Cleaner with Blue Logo
Big Block Mopar
Ford 289-302-351W Engine Dress-Up Kits Engine Dress-Up Kit with Tall Baffled Valve Covers, 14" Air
Give Ford engines a PFM440-812
Cleaner, Timing Chain Cover, Push-In Breather, (2) Valve
complete makeover Cover Grommets, and (12) Valve Cover Nuts. For Big Block
Mopar Engines.
with new Ford Racing PFM440-811 Stamped Steel Tall Valve Covers with Baffles for BBM. Pair.
dress-up kits! Available
** Package contains 4 pieces. Order 3 packages per engine.
in two styles, perfect
for customizing the Ford
engine. Standard Kits
include valve covers, air
cleaner, air breather cap
and (12) mini nuts, while
the Deluxe Kits include all
of the components from
the Deluxe Kit plus an oil
dipstick and spark plug wire looms.
Included Dress-Up Kit:
Components: PFM302-500 PFM302-510 PFM302-515
Valve Covers PFM302-072 PFM302-071 PFM302-070
Air Breather Cap PFM302-215
12 Mini Nuts PFM302-315 x3

408 2023 - 2024 HOT ROD AND EARLY MUSCLE

Mopar Omega “M” Timing Cover Slim-Fit Direct-Fit
Engineered for popular big block Chrysler 383- Radiator Systems
440 engines, high-quality steel timing cover With a total thickness
is emblazoned with the blue Mopar Omega “M” of less than 4" including
emblem. Offered with choice of black crinkle or radiator, fan, and
chrome finish, timing cover includes the timing shroud, Slim-Fit Direct-
tab and installed oil seal. Fit radiator systems
Part No. Description are designed to fit the
PFM440-219 BB Mopar Timing Cover, Black Crinkle Finish factory space, but bring
PFM440-216 BB Mopar Timing Cover, Chrome Finish
modern cooling power
to classic muscle cars. Featuring single-pass radiators
Mopar Emblem Slant-Edge with Tig-welded tanks and billet radiator caps, they
Aluminum Breather Caps include an integrated high-capacity fan and a thread-in
These officially licensed, Mopar adjustable thermostat. Natural aluminum.
slant-edge aluminum push-in Part No. Description
breather caps are available in three different finishes, with Slim-Fit Direct-Fit Radiators
raised and milled or recessed with inlaid painted emblems. Radiator, 28-7/64"W x 18-1/2"H x 4"D, Driver Side Inlet,
The 3D Mopar Omega “M” emblem gives this 2.5" breather cap a PFM69600.1 Passenger Side Outlet. For 1967-69 GM F-Body
w/ Manual Transmission.
bold, clean look. Designed to fit twist-on hole, and 1.22" push-
Radiator, 28-7/64"W x 18-1/2"H x 4"D, Driver Side Inlet,
in holes. Special twist-on grommet included. PFM69600.4 Passenger Side Outlet. For 1967-69 GM F-Body
Part No. Description w/ GM LS-Series and Automatic Transmission.
PFM440-440 “M” Black Crinkle with Raised Machined Emblem Radiator, 31-13/64"W x 16-51/64"H x 4"D, Driver Side Inlet,
PFM440-441 Mopar Omega “M” Polished with Recessed Black Emblem PFM69625.1 Passenger Side Outlet. For 1968-77 GM-A-Body
PFM440-442 Mopar Omega “M” Chrome with Recessed Black Emblem w/ Manual Transmission.
Radiator, 31-13/64"W x 16-51/64"H x 4"D, Driver Side Inlet,
PFM69625.2 Passenger Side Outlet. For 1968-77 GM-A-Body
Chrome Mopar Engine w/ Automatic Transmission.
Dress-Up Components Radiator, 29-7/64"W x 18-7/64"H x 4"D, Passenger Side Inlet,
PFM69680.1 Driver Side Outlet. For 1979-93 Ford Mustang
Customize Mopar engines with
w/ Manual Transmission.
these officially licensed Mopar Radiator, 26-1/2"W x 18-1/2"H x 4"D, Driver Side Inlet,
accessories and components PFM69695.1 Passenger Side Outlet. For 1960-88 Mopar A-Body/B-Body
designed for a factory fit with a custom look. Chrome finish w/ Manual Transmission.
with blue Mopar emblem unless otherwise noted. Radiator, 26-1/2"W x 18-1/2"H x 4"D, Passenger Side Inlet,
PFM69696.1 Driver Side Outlet. For 1960-88 Mopar A-Body/B-Body
Part No. Description
w/ Manual Transmission.
Small Block Mopar/Universal
Radiator, 26-1/2"W x 18-1/2"H x 4"D, Passenger Side Inlet,
Engine Dress-Up Kit with Tall Baffled Valve Covers, 14" Air
PFM69696.2 Driver Side Outlet. For 1960-88 Mopar A-Body/B-Body
PFM440-900 Cleaner, Push-In Breather, (2) Valve Cover Grommets, and
w/ Automatic Transmission.
(10) Valve Cover Nuts. For Small Block (LA) Mopar Engines.
Radiator Accessories
Tall Style Valve Covers with Baffles. Chrome Finish with
PFM440-301 Billet Aluminum Radiator Overflow Canister w/90° Hose
Stamped "Direct Connection" Logo. For SBM. Pair. PFM69527
Barb Fittings. 6-3/4"H x 3" O.D. Black Crinkle Finish.
Deluxe Air Cleaner Nut with Chrome Finish and Blue
PFM440-337 Billet Aluminum Radiator Overflow Canister w/90° Hose
Omega "M" Logo PFM69528
Barb Fittings. 6-3/4"H x 3" O.D. Natural Finish.
Deluxe Air Cleaner Nut with Chrome Finish and Black
PFM440-338
Omega "M" Logo
Slant-Edge 14" Air Cleaner with Polished Finish and
PFM440-832
Recessed Blue Logo
Slant-Edge 14" Air Cleaner with Polished Finish and
PFM440-833
Recessed Black Logo
Slant-Edge 14" Air Cleaner with Chrome Finish and
PFM440-835
Recessed Black Logo
PFM440-902** Valve Cover Wing-Nuts, Pack of 4
PFM440-905 Stamped Steel Tall Valve Covers with Baffles for SBM. Pair.
Classic Style 14" Air Cleaner with Chrome Finish and Blue
PFM440-906
Mopar Logo
Big Block Mopar
Engine Dress-Up Kit with Tall Baffled Valve Covers, 14" Air
Cleaner, Timing Chain Cover, Push-In Breather, (2) Valve
PFM440-814
Cover Grommets, and (12) Valve Cover Nuts. For Big Block
(B/RB) Mopar Engines.
PFM440-813 Stamped Steel Tall Valve Covers with Baffles for BBM. Pair.
** Package contains 4 pieces. Order 3 packages per engine.

2023 - 2024 HOT ROD AND EARLY MUSCLE 409

Premium Series Gauges EVO Series Gauges
ProSport Gauges Premium Series ProSport Gauges EVO
gauges feature a black face with Series gauges offer
a gray bezel and red pointer. The precise monitoring of
270° dial sweep allows precise critical engine functions
monitoring of critical engine with a 290° dial sweep
functions at a glance. These race- for quick one-glance
proven gauges use electric senders accuracy. These race-
(included) to keep hazardous fluids out of the passenger proven gauges use electric
compartment, and have a peak recall ability. They also senders (included) to keep
include a programmable warning feature with a blinking hazardous fluids out of the passenger compartment,
warning light and an audible warning that you can silence. and include a fully programmable warning feature with a
Premium Series gauges feature selectable white or blinking warning light as well as an audible warning that
amber LED lighting format and multi-level dimming to you can silence.
adjust for any lighting situation. When off, the gauges are EVO gauges have black faces and bezels, and are
blacked out. available in Premium format with integrated 4-color
Premium Series gauges are offered in 2-1/6" format with selectable (red/blue/green/white) LED lighting or red/
available matching 3-3/8" and tachometer. blue or green/white LED lighting options, they offer
Part No. Description multi-level dimming to adjust for any lighting situation.
PSG216SMBOSWL270-PK.PSI Boost w/ Sender, 30 in HG-35 psi When off, the gauges are blacked out.
PSG216SMFPSWL270-PK.PSI Fuel Pressure w/Sender, 0-100 psi EVO Series gauges are offered in low-profile 2-1/6"
PSG216SMOPSWL270-PK.PSI Oil Press w/ Sender, 150 psi format with available matching 3-3/8" digital
PSG216SMOTSWL270-PK.F Oil Temperature w/ Sender, 100-300°F GPS-enabled speedometer and tachometer.
Wideband Air Fuel w/ Sensor, 10.0:1-
PSG216SMWAAFR-WO-SF Part No. Description
20.0:1 AFR
EVO Series Premium Gauges
PSG216SMTASWL270-PK 3-3/8" Tachometer 0-10,000 rpm
Wideband Air Fuel w/Sensor, 10.0:1-
PSG216EVOAFRPK4.9-WO
20.0:1 AFR
Dual Intercooler Air Temperature Gauge PSG216EVOBO-PK-R.PSI Boost w/Sender, 30 in HG-35 psi
PSG216EVOFL-PK-R Fuel Level
PSGPSDITLCD-BL.F PSG216EVOFP-PK-R.PSI Fuel Pressure w/Sender, 0-100 psi
Accurately measure air PSG216EVOOP-PK-R.PSI Oil Pressure w/ Sender, 0-150 psi
temperature both entering and PSG216EVOOT-PK-R.F Oil Temperature w/ Sender, 100-300°F
exiting the intercooler with PSG216EVOEGT-PK-R.F EGT w/ K-Type Probe, 400-2400°F
this 2-1/6" gauge. Digital blue PSG216EVOVO-PK-R Voltmeter, 8-18V
readout can display be set to PSG216EVOWT-PK.R.F Temperature w/ Sender, 80-280°F
display Fahrenheit (68°-300°F) PSG338EVOSP-PK 3-3/8" Digital Speedometer 0-200 mph
or Celsius (20°-149°C). Includes PSG338EVOTA-PK 3-3/8" Digital Tachometer 0-11,000 RPM
two instant read sensors with EVO Red/Blue Lighting Gauges
Wideband Air Fuel w/Sensor, 10.0:1-
3/8" NPT threads. PSG216EVOAFRWB4.9-WO
20.0:1 AFR
PSG216EVOBO.PSI Boost w/Sender, 30 in HG-35 psi
PSG216EVOFL Fuel Level
PSG216EVOEFP.PSI Fuel Pressure w/Sender, 0-100 psi
PSG216EVOEOP.PSI Oil Pressure w/ Sender, 0-150 psi
Fuel Level Senders PSG216EVOOT.F Oil Temperature w/ Sender, 100-300°F
PSG216EVOEGT.F EGT w/ K-Type Probe, 400-2400°F
Designed to fit most standard fuel tanks PSG216EVOVO Voltmeter, 8-18V
from 5" to 27" deep, these senders are PSG216EVOWT.F Temperature w/ Sender, 80-280°F
2-3/4" across the mounting flange. EVO Green/White Lighting Gauges
Offered with two different resistance Wideband Air Fuel w/Sensor, 10.0:1-
PSG216EVOWGAFRWB4.9-WO
ranges. 20.0:1 AFR
Part No. Description PSG216EVOWGBO.PSI Boost w/Sender, 30 in HG-35 psi
PSGPSYFLTS Fuel Level Sender, 240 (E) - 33 (F) Ohm PSG216EVOWGEFP.PSI Fuel Pressure w/Sender, 0-100 psi
PSGPSYFLTS-90 Fuel Level Sender, 0 (E) - 90 (F) Ohm PSG216EVOWGEOP.PSI Oil Pressure w/ Sender, 0-150 psi
PSG216EVOWGOT.F Oil Temperature w/ Sender, 100-300°F
PSG216EVOWGEGT.F EGT w/ K-Type Probe, 400-2400°F
Adapter Tee Fitting for Fuel Pressure Sender PSG216EVOWGVO Voltmeter, 8-18V
PSGPSFPSTF-8 PSG216EVOWGWT.F Temperature w/ Sender, 80-280°F
Brass Tee fitting features Accessories
PSGPSGPS GPS Sensor for EVO Speedometer
8mm hose barb x 8mm hose
barb x 1/8" NPT female to
connect a fuel pressure
sender into the fuel line.

410 2023 - 2024 HOT ROD AND EARLY MUSCLE

 PTN7-1050BL
Corvette C5
Rear Leaf Spring and Radiator Isolators
Shackle Bushings PTN7-1717BL
Part No. Description Direct replacement isolators securely
Chrysler mount the radiator. Fits all C5 Corvette.
PTN4-1002BL
1960-72 “B” Body/1970-Up “E” Body, Black only.
1-1/2" Main Eye Bushing Diameter
General Motors
1967-81 Camaro/Firebird, Chrysler B/E-Body Front Strut
PTN7-1050BL
Spring Eye and Shackle Bushing Kit, Multi-Leaf Rod Bushings
1968-69 Camaro/Firebird,
PTN7-1708BL
Upper and Lower Multi-Leaf Spring Pads PTN4-1207BL
PTN7-1709BL
1970-81 Camaro/Firebird, Heavy-duty urethane bushings fit all
Upper and Lower Multi-Leaf Spring Pads 1966-72 B-Body and 1970-74 E-Body
Dodge/Plymouth. Black only.

5" Jack Pad Heavy-Duty

PTN19-1405BL Transmission Mounts
Replace the rubber pad on the floor jack with Heavy-duty, black urethane
this durable, polyurethane version. transmission mounts control
drivetrain twist. PTN6-1604BL
Vise Jaw Pads Part No. Description
PTN4-1602BL Chrysler, 1967-72 A-Body/1966-70 B-Body, Insert Only
PTN19-1450BL Chrysler, 1970-74 E-Body/1971-74 “B” Body/
PTN4-1603BL
Protect delicate projects that must be 1973-Up A-Body, Complete Mount
clamped in a vise. Strong magnets keep PTN6-1604BL 1979-93 Mustang V8/V6
the pads in place and they are easily cut PTN6-1605BL 1965-73 Mustang V8
PTN6-1608BL Ford, Trans. Conversion, 1979-93 Mustang/Tremec 6-Speed
to fit. Sold in pairs.
PTN7-1604BL GM, Most V8 Rear Wheel Drive

Heavy-Duty Engine Mounts Control Arm Bushing Kits

Durable, black urethane mounts limit Each kit includes eight control arm
movement and control torque for bushings, complete with shells
improved handling. Mounts perform like (unless specified). Bushings listed
steel mounts, but without the vibration. are black only.
Sold in pairs.
Part No. Description
Part No. Description Front Control Arm Bushings
PTN4-504BL Chrysler, Most 1973-Up, Inserts Only 1975-79 Camaro/Firebird, 1974-77 Malibu/Cutlass/Regal/
PTN6-501BL Ford Mustang, 1984-95 5.0L PTN7-214BL
LeMans, 1.625" O.D. Ft. Lower
PTN6-503BL Ford Mustang, 1965-73 260-351W 1967-72 Chevelle/Skylark/Cutlass,
PTN7-504BL Chevrolet, Short and Wide Design PTN7-217BL
1967-69 Camaro/Firebird, Round Lowers
PTN7-506BL Chevrolet, Small Clamshell, Inserts Only Rear Control Arm Bushings
1965-88 Chevelle/Malibu/Monte Carlo/Skylark/Regal/
PTN7-225BL
1970-81 Camaro Bump Stop Cutlass/LeMans/Grand Prix

PTN7-1302BL Sway Bar Bushing Kit for

Designed for the front lower control arm
on all 1970-81 Camaros. Black only. 1967-81 Camaro/Firebird
PTN7-1124
Improve handling and
Body Mount Bushing Kits reduce body roll with
Durable urethane bushings replace new urethane sway bar
worn body mounts for a quieter, bushings. Kit includes
smoother ride. Includes cadmium- nongreasable 3/4" I.D.
plated steel hardware. sway bar mounting
Part No. Description
brackets and end link bushings.
PTN7-118-BL 1963-66 GM C10 2WD Trucks w/Standard Cab, Black
PTN7-127 1976-81 Firebird, Red

2023 - 2024 HOT ROD AND EARLY MUSCLE 411

Performance Exhaust Kits
Systems use 16-gauge, mandrel-bent pipes for maximum exhaust
gas flow and feature stainless steel X-pipes, mufflers and tailpipes to
resist corrosion. Mufflers are precisely matched for ultimate sound and
performance. Pypes systems include mufflers, factory fit tailpipes, and
cadmium-plated plated clamps and hangers.
Part No. Description
Ford
PYPSFM03S 19641/2-70 Mustang V8 2-1/2" Crossmember Back System with X-Pipe, Street Pro Mufflers
PYPSFM03T 1965-70 Mustang 2-1/2" Crossmember Back System with X-Pipe, Turbo Pro Mufflers
PYPSFM43S 1965-70 Mustang 2-1/2" Crossmember Back System with H-Bomb H-Pipe, Street Pro Mufflers
PYPSFM29V 1979-93 Mustang 5.0L 2-1/2" Pype Bomb Cat Back System with M-80 Mufflers
PYPSFM10V 1986-93 Mustang 5.0L 2-1/2" Cat-Back System, Violator Mufflers
PYPSFM29VB 1979-04 Mustang Pype Bomb Cat-Back System Black with M-80 Mufflers and Resonated Tips
Dodge/Plymouth
PYPSMA10S 1967-74 Mopar A-Body V8 2-1/2" Crossmember Back System with X-Pipe, Street Pro Mufflers
PYPSMA10T 1967-74 Mopar A-Body V8 2-1/2" Crossmember Back System with X-Pipe, Turbo Pro Mufflers
PYPSMA910SE 1975-76 Mopar A-Body 2-1/2" Crossmember Back with X-Pipe, Street Pro Mufflers
1966-74 Mopar B-Body 2-1/2" Crossmember Back System with X-Pipe, Dual Rear Exit, No Mufflers, No
PYPSMB10
Tips
PYPSMB10S33 1966-74 Mopar B-Body 2-1/2" Crossmember Back System with X-Pipe, 18" Street Pro Mufflers
PYPSME11S 1970-74 Mopar E-Body, 2-1/2" with Valance Cutout System, Includes Pypes Street Pro Mufflers
GM
PYPSGA30S 1964-72 A-Body 2-1/2" Crossmember Back System without X-Pipe, Street Pro Mufflers
PYPSGA10V 1964-72 A-Body 2-1/2" Crossmember Back System with X-Pipe, Violator Mufflers
PYPSGA10 1964-72 A-Body, 2-1/2" Crossmember Back System with X-Pipe, No Mufflers
PYPSGA10S 1964-72 A-Body V8 2-1/2" Crossmember Back System with X-Pipe, Street Pro Mufflers
PYPSGA13R 1964-72 A-Body V8 3" Crossmember Back System with X-Pipe, Race Pro Mufflers
PYPSGA13S 1964-72 A-Body V8 3" Crossmember Back System with X-Pipe, Street Pro Mufflers
PYPSGA10T 1964-72 A-Body V8 2-1/2" Crossmember Back System with X-Pipe, Dual Rear Exit, Turbo Pro Mufflers
PYPSGA13T 1964-72 A-Body 3" Crossmember Back System with X-Pipe, Dual Rear Exit, Street Pro Mufflers
PYPSGA30T 1964-72 A-Body 2-1/2" Crossmember Back System with X-Pipe, Dual Rear Exit, Turbo Pro Mufflers
1964-72 A-Body 2-1/2" Crossmember Back System with H-Bomb H-Pipe, Dual Rear Exit, Street Pro
PYPSGA40S
Mufflers
PYPSGB10S 1965-69 A-Body V8 2-1/2" Crossmember Back System with X-Change, Street Pro Mufflers
1967-69 F-Body, 2-1/2" Crossmember Back System with H-Bomb H-Pipe, Dual Rear Exit, Street Pro
PYPSGF42S
Mufflers
PYPSGF60S 1967-69 F-Body V8 2-1/2" Crossmember Back System with X-Pipe, Street Pro Mufflers
PYPSGF60T 1967-69 F-Body 2-1/2" Crossmember Back System with X-Pipe, Dual Rear Exit, Turbo Pro Mufflers
PYPSGF63R 1967-69 F-Body, 3" Quarter Panels Exit with X-Pipe System, Race Pro Mufflers
PYPSGF60V 1967-69 2-1/2" F-Body Quarter Panel Exit with X-Pipe System, Violator Mufflers
PYPSGF63S 1967-69 F-Body V8 3" Crossmember Back System with X-Pipe, Street Pro Mufflers
PYPSGF70 1967-81 F-Body V8 2-1/2" Crossmember Back System with X-Pipe, Race Pro Mufflers
PYPSGF11R 1970-74 F-Body V8 2-1/2" Crossmember Back System, Race Pro Mufflers
PYPSGF11S 1970-74 F-Body V8 2-1/2" Crossmember Back System with X-Pipe, Street Pro Mufflers
PYPSGF11T 1970-74 F-Body 2-1/2" Crossmember Back System with X-Pipe, Dual Rear Exit, Turbo Pro Mufflers
PYPSGF11V 1970-74 F-Body 2-1/2" Crossmember Back with X-System, Violator Mufflers
PYPSGF13R 1970-74 F-Body 2-1/2" Crossmember Back with X-System, Dual Rear Exit, Race Pro Mufflers
PYPSGF13S 1970-74 F-Body V8 3" Crossmember Back System with X-Pipe, Street Pro Mufflers
PYPSGF13T 1970-74 F-Body 3" Crossmember Back System with X-Pipe, Dual Rear Exit, Turbo Pro Mufflers
PYPSGF43S 1970-74 F-Body 3" Crossmember Back System with H-Bomb H-Pipe, Dual Rear Exit, Street Pro Mufflers
PYPSGF911SE 1975-81 F-Body 2-1/2" Crossmember Back System with X-Pipe, Dual Rear Exit, Turbo Pro Mufflers
1975-81 F-Body 2-1/2" Crossmember Back Crossflow System with H-Pipe, Dual Rear Exit, Race Pro
PYPSGF940E
Mufflers
PYPSGF970E 1975-81 F-Body/X-Body 2-1/2" Crossmember Back System with X-Pipe, Dual Rear Exit, Race Pro Muffler
PYPSGG50R 1978-88 G-Body V8 2-1/2" Cat-Back System, Dual Side Exit, Race Pro Mufflers
PYPSGG50T 1978-88 G-Body V8 2-1/2" Cat-Back System, Dual Side Exit, Turbo Pro Mufflers
PYPSGG13 1978-88 G-Body V8 3" Crossmember Back System with X-Pipe, No Mufflers
PYPSGN10S 1962-67 Nova V8 2-1/2" Crssmember Back System with X-Pipe, Street Pro Mufflers
PYPSCC12R 1968-73 Corvette C3 2-1/2" Crossmember Back System with X-Pipe, Race Pro Mufflers
PYPSCC10S 1974-81 Corvette C3 2-1/2" Crossmember Back System with X-Pipe, Street Pro Mufflers
PYPSCC10T 1974 Corvette C3 2-1/2" Crossmember Back System with X-Pipe, Dual Rear Exit, Turbo Pro Mufflers
1970-71 GTO/1968-72 442 2-1/2" Crossmember Back System with X-Pipe and Valance Exit, Street Pro
PYPSGA12S
Mufflers
PYPSGT79T 1967-74 Full-Size Truck 2-1/2" Crossmember Back with X-Pipe System, Dual Side Exit, Turbo Pro
Note: X-Change systems include additional race cut-outs

412 2023 - 2024 HOT ROD AND EARLY MUSCLE

Exhaust Headers Stainless Steel 2-1/2" and 3"
All headers are formed Exhaust System Builder Kits
from 304 stainless steel
and have a tube diameter
of 1-5/8" (except where
noted). High-quality
gaskets and hardware are included with each pair of
headers.
Part No. Description
1987-93 Mustang Short Tube Headers,
PYPHDR50S
Polished, 2-1/2" Collector

Street and Race Mufflers

Street Pro: Great street/strip
muffler that maintains its The builder kit is perfect for assembling custom,
rich sound. Race Pro: Not mandrel-bent, performance exhaust systems. It contains
much attention at idle but all of the 304 stainless steel bends, straight pipe, clamps,
upon acceleration, look hangers, and flanges needed to build a great exhaust
out! Violator: Unique and system. The possibilities are endless—ideal for street
aggressive sound is the PYPMVR10 rods and other applications that require that special
result of oversized 3" combination of high-quality components. The Tunnell
internal louvered tube with X-Pipe tucks up into the driveshaft tunnel. The dump legs
sound reflectors. replace the front legs on the popular X-pipe.
Part No. Description Part No. Description
PYPMVR10 Race Pro 14" 2-1/2" Offset/Offset PYPSVV10 2-1/2" Stainless Exhaust System Builder Kit
PYPMVR13 Race Pro 14" 2-1/2" Offset/Center PYPSVV13 3" Stainless Exhaust System Builder Kit
PYPMVR16 Race Pro 14" 3" Offset/Offset
PYPMVS10
PYPMVS13
Street Pro, 2-1/2", Offset/Offset
Street Pro, 3", Offset/Offset
Universal Stainless Steel X-Pipes
PYPMVS16 Street Pro, Offset/Offset The X-Pipe, an improved version of the old “balance
PYPMVV10 Violator Pro, 2-1/2", Offset/Offset tube” or “H-pipe”
PYPMVV16 Violator Pro, 3", Offset/Offset design, offers
increased exhaust
Round Case Mufflers scavenging for added PYPXVA10

Round case mufflers horsepower and

fit where there torque. Constructed
PYPMVR200S from 409 stainless
isn’t a lot of space.
They feature the steel, X-Pipes are
same straight-through perforated pipe and provide offered in traditional PYPXVX10
excellent flow and an aggressive sound. Ideal for street or X-Change design,
rod applications. which features
an open exhaust
Part No. Description
outlet after the
PYPMVR200S 14", 2-1/2" In/2-1/2" Out, 4" Round Case
PYPMVR203S 14", 3" In/3" Out, 4" Round Case
X-pipe. Open the
dumps for a quick
exit of the exhaust
Electric Exhaust Cut-Out Kits gases and get the PYPXVF10
Cut-out kit full effect of the
comes with two rumbling sound and
electric exhaust great performance
cut-outs, wiring associated with open
PYPXVX10F
harness to control exhaust. The Tunnell
both with one X-Pipe tucks up into
switch, stainless the driveshaft tunnel. The dump legs replace the front
steel mounting legs on the popular X-pipe.
hardware, extra
Part No. Description
thick gaskets,
PYPXVA10 2-1/2" X-Pipe
and a limited PYPXVA13 3" X-Pipe
lifetime warranty. PYPXVA14 3.5" X-Pipe
The cut-outs are PYPXVX10 2-1/2" X-Change
manufactured PYPXVX13 3" X-Change
to the highest standards with only the highest quality PYPXVF10 2-1/2" Tunnel X-Pipe
materials. PYPXVF13 3" Tunnel X-Pipe
Part No. Description PYPXVX10F 2-1/2” Dump Legs
PYPHVE10 Dual, Electric Cut-Out Kit PYPXVX13F 3" Dump Legs
PYPHVE10K3 Dual, Electric Cut-Out Kit with 3" Y-Pipes

2023 - 2024 HOT ROD AND EARLY MUSCLE 413

Downpipes Polished Exhaust Tips
Add a finishing touch to any performance
exhaust system. Polished stainless
steel exhaust tips provide a
model-correct or universal PYPEVT80
installation. Sold per pair.
Constructed from mandrel-bent, 2-1/2” diameter Part No. Description
stainless steel. The downpipes complete the installation PYPEVT34 1968-72 Olds 442, 2-1/2" Trumpet Exhaust Tips
of a performance exhaust system to the OEM exhaust PYPEVT35 1968-71 Olds 442, 3" Trumpet Exhaust Tips
manifolds. PYPEVT49 2-1/2" x 9" Slip-Fit Tips Trans-Am Style
PYPEVT50 3" x 9" Slip-Fit Tips Trans-Am Style
Part No. Description
PYPEVT54 1969-72 Chevelle 2-1/2" Slip-Fit Tips
PYPDGF13S 1967-72 Pontiac, Standard Manifold Downpipes, 2-Bolt
PYPEVT56 1969-72 Chevelle 3" Slip-Fit Tips
1964-73 Pontiac LeMans/GTO and
PYPDGA10S PYPEVT58 1969-81 Camaro/Firebird 2-1/2" Slip-Fit Tips, Long
1970-81 Pontiac Firebird, 2-Bolt Flanges
PYPEVT59 1969-81 Camaro/Firebird 2-1/2" Slip-Fit Tips, Short
1964-77 Pontiac LeMans/GTO/Firebird,
PYPDGA20S23 PYPEVT61 1969-81 Camaro/Firebird 3" Slip-Fit Tips, Short,
H/O or Ram Air Manifolds,(1) 2-Bolt and (1) 3-Bolt Flange
1964-77 Pontiac LeMans/GTO/Firebird, PYPEVT80 Mopar Style 2-1/2" Rectangle Slant Cut Slip-Fit Tips
PYPDGA20S33 1970-74 Challenger 2-1/2" Dual Rectangle Slant
H/O or Ram Air Manifolds, (2) 3-Bolt Flanges PYPEVT86
PYPDGU13S 1978-88 GM G-Body, SB Chevy 3-Bolt Flanges Cut Split-Fit Tips
1970-81 Camaro/Chevelle, 2008-11 Challenger 3" Dual Rectangle Slant
PYPDGU14S PYPEVT88
Small Block Chevy 3-Bolt Flanges Cut Split-Fit Tips
PYPDGU20S 1970-81 Camaro/Chevelle, Big Block Chevy 3-Bolt Flanges
PYPDCC10S
1967-81 Corvette, Small Block Chevy 3-Bolt Flanges, Clamps and Hangers
Ram Horn Manufactured from heavy-duty long-lasting stainless
19641/2-66 Mustang with 289-302 (except 289 Hi-Po), steel.
PYPDFM12S
2-Bolt Flanges
1967-72 GM 2WD Trucks, Small Block Chevy with 3-Bolt
PYPDGU16S Flanges. Only for Use with the Factory Angled GM Ram PYPHVH11S
Horn-Style Manifolds. PYPHGH11
1968-72 Olds 442, 400, and 455 ci or Earlier Models with
PYPDOF10S
Late Style Manifolds. 2-Bolt Flanges.
PYPHGH10 PYPHVC21

Part No. Description

PYPHFM79 1979-93 Mustang Tailpipe Hangers
Collector PYPHGH10 1964-72 GM “A” Body Tailpipe Hangers
PYPHGH11 1968-72 Chevelle Tailpipe Hangers
Reducers PYPHGH13 GM “A” Body Muffler Hangers
Fully polished stainless steel PYPHVC21 2-1/2” x 1” Band Clamp
pipes connect headers to exhaust PYPHVC24 3” x 1” Band Clamp
pipes. Reducers are 12 inches long and PYPHVH11S Universal Hanger, 2-1/2”
fully TIG welded. PYPHVH13S Universal Hanger, 3”
PYPHVH20S Universal Hanger
Part No. Description
PYPPVR10S 3" Header Collector to 3" Exhaust PYPHVH30 1970-81 GM “F” Body Tailpipe Hangers
PYPPVR16S 3" Header Collector to 2-1/2" Exhaust PYPMHV6 Mustang Muffler Hangers
PYPTPHV6 Universal Tailpipe Hangers

Turbo Pro Mufflers

Turbo Pro mufflers
Band Clamp Butt Connectors feature unique flow
Manufactured from heavy-duty long- control channels that
lasting stainless steel, these clamps permit the CFM flow of
will support the ends of two same- a straight pipe without
diameter pipes as securely as welding. the drone or resonance,
resulting in a quiet, mellow tone with a true performance
Part No. Description
sound. 409 stainless steel welded case can handle the
PYPHVC65 2-1/2" Band Clamp Butt Connector
PYPHVC66 3" Band Clamp Butt Connector
demands of modern performance engines. 9-1/2" x 4-1/2"
oval body.
Part No. Description
PYPMVT10 Turbo Pro, 14" long with 2-1/2" Offset/Offset
PYPMVT13 Turbo Pro, 14" long with 2-1/2" Offset/Center
PYPMVT16 Turbo Pro, 4" long with 3" Offset/Offset
PYPMVT30 Turbo Pro, 18" long with 2-1/2", Offset/Offset

414 2023 - 2024 HOT ROD AND EARLY MUSCLE

Stocker Star® Simultaneous Single-Adjustable GM
Deflective disc valving provides increased response, Front Coil-Over Conversion Systems
control, and consistency for true adjustable, bolt-in
performance. Shock compression and rebound
valving can be adjusted to 18 settings, front and rear,
while the shocks are on the car. Brightly anodized,
one-piece forged aluminum shock bodies are
lightweight and strong. The 5/8" centerless-ground,
hard chrome-plated piston rod eliminates flex, and a
unique double lip seal eliminates seal drag and keeps
dirt out. Made in the U.S.A.
Year/Model Front Rear
Chevrolet
1967-69 Camaro (Single Leaf) QA1TS505 QA1TS703
1968-69 Camaro (Multi Leaf) QA1TS505 QA1TS802
1970-81 Camaro QA1TS507 QA1TS702
1982-02 Camaro — QA1TS704
1964-67 Chevelle/Malibu QA1TS507 QA1TS801
Conical springs mount easily with the lower end seated
1968-83 Chevelle/Malibu QA1TS505 QA1TS801
1962-67 Nova/Chevy II — QA1TS703
on the coil-over shock and the upper end in the original
1968-79 Nova/Chevy II QA1TS505 QA1TS801 spring bucket for easy, bolt-in installation. Spring has
Dodge more stored energy and offers increased weight transfer.
1970-74 Challenger QA1TS501 QA1TS901 Kit includes two Proma Star shocks with 18 adjustment
1965-72 Charger, Coronet QA1TS501 QA1TS901 settings, two conical springs, and mounting hardware.
Ford Made in the U.S.A.
1979-83 Mustang QA1HS601S QA1TS706 Front End Front End Front End
1994-04 Mustang QA1HS603S QA1TS706 1701-1900 lbs. 1901-2100 lbs. 2101-2300 lbs.
Plymouth 350# Spring 450# Spring 550# Spring
1964-74 Barracuda QA1TS501 QA1TD901 Year/Model Rate Rate Rate
Pontiac Buick
1867-69 Firebird/Trans-Am (Single Leaf) QA1TS505 QA1TS703 1973-77 Regal QA1GS401-10350C QA1GS401-10450C ­—
1868-69 Firebird/Trans-Am (Multi Leaf) QA1TS505 QA1TS802 1978-87 Regal QA1GS401-10350C QA1GS401-10450C ­ —
1970-81 Firebird/Trans-Am QA1TS507 QA1TS702 1964-67 Skylark QA1GS501-10350A QA1GS501-10450A QA1GS501-10550A
1982-92 Firebird/Trans-Am — QA1TS703 1968-72 Skylark QA1GS401-10350B QA1GS401-10450B QA1GS401-10550B
1975-79 Skylark QA1GS401-10350C QA1GS401-10450C ­—
Ultra Ride Coil-Over Shocks Chevrolet
1967-69 Camaro QA1GS401-10350A QA1GS401-10450A QA1GS401-10550A
The Ultra Ride is an 1970-81 Camaro QA1GS501-10350C QA1GS501-10450C ­—
externally adjustable 1964-67 Chevelle /
shock with deflective QA1GS501-10350A QA1GS501-10450A QA1GS501-10550A
El Camino
disc valving to respond 1968-72 Chevelle /
QA1GS401-10350B QA1GS401-10450B QA1GS401-10550B
to changes in road conditions. All Ultra Ride shocks have El Camino
polyurethane bushings with a 5/8" I.D. and an 18-position 1973-77 Chevelle /
QA1GS401-10350B QA1GS401-10450B QA1GS401-10550B
El Camino
external adjustment knob. Coil-over spring mounting
1978-83 Chevelle /
hardware is also included. Made in the U.S.A. El Camino
QA1GS401-10350C QA1GS401-10450C ­—
Mounting Ride Compressed Extended Recommended 1955-57 Full Size QA1GS501-10350A QA1GS501-10450A QA1GS501-10550A
Part No. Location Height Length Length Spring 1970-72 Monte Carlo QA1GS401-10350B QA1GS401-10450B QA1GS401-10550B
QA1US302 Front 9.75" - 10.25" 8-5/8" 11.125" 7" 1973-77 Monte Carlo QA1GS401-10350C QA1GS401-10450C ­—
Front/ 1978-88 Monte Carlo QA1GS401-10350C QA1GS401-10450C ­—
QA1US402 11.75" - 12.25" 10-1/8" 14" 9"-10"
Rear
1968-74 Nova/Chevy II QA1GS401-10350A QA1GS401-10450A QA1GS401-10550A
QA1US502 Rear 13.75" - 14.25" 11-5/8" 17" 12"
1975-79 Nova/Chevy II QA1GS401-10350C QA1GS401-10450C ­—
Oldsmobile
Aluma Matic Coil-Over Shocks 1964-67 Cutlass / 442 QA1GS501-10350A QA1GS501-10450A QA1GS501-10550A
Essentially the same 1968-72 Cutlass / 442 QA1GS401-10350B QA1GS401-10450B QA1GS401-10550B
shock as the Ultra Ride, 1973-77 Cutlass / 442 QA1GS401-10350C QA1GS401-10450C ­—
the Aluma Matic shocks 1978-87 Cutlass / 442 QA1GS401-10350C QA1GS401-10450C ­—
are non-adjustable yet 1973-74 Omega QA1GS401-10350A QA1GS401-10450A QA1GS401-10550A
1975-79 Omega QA1GS401-10350C QA1GS401-10450C ­—
retain all of the other features found on the higher priced
Pontiac
shocks. 1967-69 Firebird QA1GS401-10350A QA1GS401-10450A QA1GS401-10550A
Mounting Compressed Extended Recommended 1970-81 Firebird QA1GS501-10350C QA1GS501-10450C ­—
Part No. Location Ride Height Length Length Spring 1964-67 GTO / Tempest /
QA1ALN3855P Front 9-3/4" - 10-1/4" 8-5/8" 11-1/4" 7" QA1GS501-10350A QA1GS501-10450A QA1GS501-10550A
La Mans
QA1ALN5855P Rear 13-1/2" - 14" 11-1/8" 16-1/4" 12" 1968-72 GTO / Tempest /
QA1GS401-10350B QA1GS401-10450B QA1GS401-10550B
La Mans
1973-77 Gran Prix /
QA1GS401-10350C QA1GS401-10450C ­—
LeMans
1978-87 Gran Prix /
QA1GS401-10350C QA1GS401-10450C ­—
LeMans
1974-77 GTO / Ventura QA1GS401-10350C QA1GS401-10450C ­—

2023 - 2024 HOT ROD AND EARLY MUSCLE 415

Coil-Over Springs 1963-87 Chevy C-10
QA1 coil-over springs are made from high-quality chrome Front Coil-Over
silicone steel, then powder coated with a polished
appearing finish.
Conversion Kits
These complete front coil-
Rate
(lbs) 7" 10" 12" 14" over conversion kits include
95 — — QA112HT095 QA114HT095 black powder coated upper
110 — — QA112HT110 QA114HT110 and lower control arms
130 — — QA112HT130 QA114HT130 manufactured from 12-gauge
150 — — QA112HT150 QA114HT150 HSLA steel tubing along with
170 — — QA112HT170 — QA1 performance ball joints
175 — — — QA114HT175 and maintenance-free polymer bushings. The kits add up
200 — QA110HT200 QA112HT200 QA114HT200 to 7° of caster for more stability and allows for optimum
225 — — — QA114HT225
camber adjustment in a lowered truck. Manufactured
250 QA17HT250 QA110HT250 QA112HT250 QA114HT250
300 QA17HT300 QA110HT300 QA112HT300 QA114HT300
with either single- or double-adjustable coil-over shocks
350 QA17HT350 QA110HT350 QA112HT350 — that allow changing the valving to meet specific needs,
450 QA17HT450 — — — along with a variety of high-travel spring rates. Hardware
and all required nuts and bolts are included. Made in USA.
MOD Series Shock Absorbers Spring Double-Adjustable Part No. Single-Adjustable Part No.
Rate
Innovative, multi-patent- 650 QA152611-D650 QA152611-S650
pending MOD series shocks, 750 QA152611-D750 QA152611-S750
suited to high-performance, 850 QA152611-D850 —
drag racing, or pro-touring
applications, may be
revalved in literally minutes, Trailing Arms and Tubular Braces
while being left in place on Lower trailing arms are
the car, saving precious constructed from .120"
time and money. Made in wall rectangular or 1-1/4"
the USA, shocks include diameter cold-rolled steel
24-click independent tubing and fitted with
QA15249
compression and rebound greaseable, graphite/
adjustments with low-speed polyurethane bushings
bleed. Choose from shocks for strength and superior
with left or right-placed traction. Lower trailing
piggyback or remote-style Remote Canister Piggyback arms are drilled for OEM
canisters. Each shock is Left Right sway bar mount on GM “A”
QA15204
sold complete with thrust and “G” body applications.
bearings. Choose standard or
Part No. Description Comp. Height Ext. Height Travel
adjustable upper trailing
Remote Canisters arms, which allow setting
QA1M411CL Left 10.125" 14" 3.875" desired pinion angle for
QA1M411CR Right 10.125" 14" 3.875" maximum traction. Tubular QA15211
QA1M511CL Left 11.5" 16.875" 5.375" braces join the front
QA1M511CR Right 11.5" 16.875" 5.375" mounting points of the
QA1M611CL Left 12.5" 18.75" 6.25" upper and lower trailing arms to help strengthen the
QA1M611CR Right 12.5" 18.75" 6.25" chassis.
QA1M711CL Left 12.875" 19.5" 6.625"
Part No. Description
QA1M711CR Right 12.875" 19.5" 6.625"
Lower Trailing Arms
QA1M911CL Left 14.875" 23.625" 8.75"
1982-02 Camaro/Firebird/1978-88 GM A/G-Body,
QA1M911CR Right 14.875" 23.625" 8.75" QA15204
Use EDE5215 Hardware Kit
Piggyback
QA15205 1964-72 GM A-Body
QA1M511PL Left 11.5" 16.875" 5.375"
Upper Trailing Arms
QA1M511PR Right 11.5" 16.875" 5.375"
QA15247 1978-88 GM A/G-Body, Adjustable
QA1M611PL Left 12.5" 18.75" 6.25"
QA15248 1968-72 GM A-Body, Adjustable
QA1M611PR Right 12.5" 18.75" 6.25"
QA15249 1964-67 GM A-Body, Adjustable
QA1M711PL Left 12.875" 19.5" 6.625"
Tubular Braces
QA1M711PR Right 12.875" 19.5" 6.625"
QA15210 1978-88 GM A/G-Body
QA1M911PL Left 14.875" 23.625" 8.75"
QA15211 1968-72 GM A-Body
QA1M911PR Right 14.875" 23.625" 8.75"
Note: 1964-72 GM “A” body cars include Chevelle/Malibu, Cutlass/442, Skylark/GS and LeMans/
GTO. 1978-88 GM “A” and “G” body cars include Monte Carlo, Malibu, Cutlass, Regal, LeMans, and
Grand Prix.

416 2023 - 2024 HOT ROD AND EARLY MUSCLE

GM 2.0 Tubular Tubular Control Arms
Control Arms QA1’s tubular steel
QA1’s 2.0 tubular steel control arms reduce
control arms reduce unsprung weight and
unsprung weight and improve handling.
improve handling. Eco Street arms have
Street Performance arms have urethane bushings for compressed rubber
improved control and smoother ride, while an aluminum bushings for control
cross shaft provides added stiffness with minimal added and smooth ride. Race-proven Pro-Comp arms have
weight. heat-treated, XM Heim ends with PTFE/Kevlar linings
Pro-Touring arms feature a billet aluminum cross-shaft for performance and durability. Spacers for forward and
for reduced weight and added rigidity, as well as low- rearward wheel base adjustment are included.
friction ball joints with 1" longer upper ball joints. Ultra- Part No. Description
low friction composite bushings eliminate flex, providing Eco Street Tubular Control Arms
bind-free movement and superior performance. QA1MU1ESA 1979-93 Mustang, 4.6/5.0L
QA1MU2ESA 1994-04 Mustang, 4.6/5.0L
Both styles are coil-over ready. Black powder-coated
finish. Sold in pairs. Note: Require QA1 coil-over struts and caster/camber plates.

Part No. Description

Street Performance Tubular Control Arms Struts
QA152717 Upper Control Arms for 1967-69 GM F-Body/1968-74 X-Body Aluminum-bodied, mono-tube struts are three
QA152719 Lower Control Arms for 1967-69 GM F-Body/1968-74 X-Body
pounds lighter and compatible with stock or
Upper Control Arms for 1970-81 GM F-Body/1973-77
QA152718
A-Body/1975-79 B-Body/1975-79 X-Body aftermarket K-members. Externally adjustable
Lower Control Arms for 1970-81 GM F-Body/1973-77 valves are accessible from under the hood. Sold
QA152720 individually.
A-Body/1975-79 B-Body/1975-79 X-Body
QA152722 Upper Control Arms for 194-72 GM A-Body Part No. Description
QA152737 Lower Control Arms for 1964-72 GM A-Body QA1HS601S 1979-93 Mustang 5.0L
QA152765 Upper Control Arms for 1978-88 GM G-Body QA1HS603S 1994-04 Mustang 5.0L, 2" Lowered
QA152764 Lower Control Arms for 1978-88 GM G-Body
QA152767 Upper Control Arms for 1982-04 GM S-10 Truck
QA152766 Lower Control Arms for 1982-04 GM S-10 Truck
Caster and Camber Plates
Pro-Touring Tubular Control Arms Plates use PTFE-lined, replaceable
QA152517 Upper Control Arms for 1967-69 GM F-Body/1968-74 X-Body bearings in housings that are TIG-
QA152519 Lower Control Arms for 1967-69 GM F-Body/1968-74 X-Body welded for maximum strength and
QA152518
Upper Control Arms for 1970-81 GM F-Body/1973-77 durability. Change camber and
A-Body/1975-79 B-Body/1975-79 X-Body caster for street use as well as drag
Lower Control Arms for 1970-81 GM F-Body/1973-77 or road racing.
QA152520
A-Body/1975-79 B-Body/1975-79 X-Body
QA152522 Upper Control Arms for 194-72 GM A-Body Part No. Description
QA152537 Lower Control Arms for 1964-72 GM A-Body QA1CC100MU 1979-89 Mustang
QA152565 Upper Control Arms for 1978-88 GM G-Body QA1CC102MU 1990-93 Mustang
QA152564 Lower Control Arms for 1978-88 GM G-Body QA1CC104MU 1994-04 Mustang
Note: Require QA1 coil-over struts and caster/camber plates.
Bump Steer Kit
Correct bump
Rear Suspension Anti-Hop Bars steer caused by
QA15213 changes in toe-in
Anti-Hop bars relocate the upper during suspension
trailing arms, changing the instant travel. "X" series
center of the rear suspension to rod ends with jam nuts, anodized
improve chassis reaction and traction. aluminum adjusting sleeves with jam
One of the most effective means of improving 1964-72 GM nuts, special spindle studs with washer
A-Body rear coil spring-equipped cars. and lock nut, and bump steer spacer
assortment are included in kit.
GM F-Body Torque Arms Part No. Description
Strong, tubular QA1BAX102 1979-93 Mustang 5.0L, Including Cobra
QA15282 QA1BAX104 1994-04 Mustang 4.6/5.0L Including Cobra
constructed
torque
arms reduce wheel hop and aid traction under hard
acceleration. Fit all 1984-02 Camaro/Firebird with GM
10-bolt rear ends in which the front locator of the OE
torque arm has lips facing away from the driveshaft.
Offered in standard and adjustable versions. Adjustable
torque arm allows easy pinion angle changes.
Part No. Description
QA15280 1984-02 Camaro/Firebird Torque Arm
QA15282 1984-02 Camaro/Firebird Torque Arm, Adjustable

2023 - 2024 HOT ROD AND EARLY MUSCLE 417

 QA15249
GM Suspension Quick Guide
Front Rear Upper
Control Arms Trailing Arms Sway Bar
Make/ Upper Lower Tie Rod
Model Year Street Street Adj. Tubular Sleeves Front Rear Kit
A-Body 1964-67 QA152722 QA152737 QA15249(N) QA15269(N) QA15250 QA152870 QA152871 QA152873
A-Body 1968-70 QA152722 QA152737 QA15248 QA15268 QA15250 QA152870 QA152871 QA152873
A-Body 1971-72 QA152722 QA152737 QA15248 QA15268 QA15252 QA152870 QA152871 QA152873
A/G-Body 1978-88 QA152765 QA152764 QA15247 — QA15250 — — —
F-Body 1967-69 QA152717 QA152719 — — QA15251 QA152816 — —

QA152303
Mopar Suspension Quick Guide
Front
Control Arms
Make/ Dynamic
Model Year Upper Lower K-Members Strut Bars
A-Body 1964-66 QA152303 QA152307(B) — QA152311
A-Body 1967-72 QA152303 QA152307(B) QA152313 QA152311
A-Body 1973-76 QA152301(A) QA152307(B) — QA152311
A-Body 1977-79 — — — — QA152307
B-Body 1962-65 QA152305 QA152308(C) — QA152312
B-Body 1966-70 QA152305 QA152308(C,E) QA152315 QA152312
B-Body 1971-72 QA152305 QA152308(C) QA152314 QA152312
E-Body 1970-74 QA152305 QA152308(C) QA152314 QA152312

Footnotes For GM Suspensions

A Add Coil Spring Adapter part #7720-168 for control arm to accept stock springs.
B Add Coil Spring Adapter part #7720-203 for control arm to accept stock springs.
N 1964 GM A-Bodies require upper trailing arm bushing part #9032-383.
Footnotes For Mopar Suspensions
A Fits A-body with 1973-76 disc brake spindles (large ball joint).
B Will work on 1967-72 A-body with QA1 K-member and sway bar, and 64-72 A-body without sway bar.
C Direct fit for 1970-72 B-body. Will work on 1966-69 B-body with QA1 K-member and sway bar, and 1962-72 B-body without sway bar.
E Only recommended for use with #52315 and 1971-72 B-Body or E-Body sway bar or with factory K-member and no sway bar.

1968-72 GM A-Body 1978-88 GM G-Body

Suspension Kit Suspension Kit

Handling Kit with Shocks Handling Kit with Shocks

QA1HK22-GMA2 QA1HK22-GMA1

INCLUDES THE FOLLOWING SUSPENSION COMPONENTS: INCLUDES THE FOLLOWING SUSPENSION COMPONENTS:
• QA1GS401-10400A Front Single- Adjustable • QA1GS401-10450C Front Single-Adjustable
Pro Coil Shock System Pro Coil Shock System
• QA1RCK52340 Rear Single-Adjustable • QA1RCK52352 Rear Single-Adjustable
Pro Coil Shock System Pro Coil Shock System
• (2) QA17888-109 Thrust Bearing Kit • (2) QA17888-109 Thrust Bearing Kit
• QA152873 Front and Rear Sway Bars • QA1T115W Spanner Wrench
• QA15205 Boxed Lower Trailing Arms • QA15204 Boxed Lower Trailing Arms
• QA15268 Tubular Upper Trailing Arms • QA15267 Tubular Upper Trailing Arms
• QA152422 Upper Street Control Arms • QA152465 Upper Street Control Arms
• QA152437 Lower Street Control Arms • QA152464 Lower Street Control Arms
• QA152399 Lower Control Arm Hardware Kit • QA152397 Lower Control Arm Hardware Kit
• QA15211 Tubular Braces • QA15250 Tie Rod Adjuster Sleeves
• QA15217 Trailing Arm Hardware Kit • QA15210 Tubular Brace
• QA15215 Trailing Arm Hardware

418 2023 - 2024 HOT ROD AND EARLY MUSCLE

Chevy C-10 Chevy C-10 1963-87 Rear Sway Bar Kit
Tubular Street Control Arm Kits QA152897
These black powder- This rear sway bar
coated tubular control is manufactured
arms use factory from 1-1/4"
replacement ball joints heavy-duty
and polyurethane pivot solid-core (1045)
bushings. The upper cold-formed steel
arms feature an offset for maximum
cross shaft allowing quick and easy camber adjustment. strength. Includes
Designed to add 3°-4° of caster and 0.5° to 1° of negative greaseable graphite
camber when upper and lower kits are used together. polyurethane bushings, U-bolts and high-quality plated
When used independently, they will add approximately hardware. Black powder-coated finish only. Made in USA.
half of the preceding numbers. Kits contain all necessary
mounting hardware. Made in USA. Sold in pairs. Chevy C10 1963-72
Part No. Application
1963-87 Chevy C10 Lower Control Arm Kit, with OE-Style
Rear Suspension Systems
QA152601 Designed
Spring Pockets
QA152602 1963-87 Chevy C10 Upper Control Arm Kit to convert
1963-72 trucks
Chevy C-10 Front Coil-Over coil-spring
suspension
Conversion Kits to coil-overs.
These complete front coil-over This system
conversion kits include black powder- relocates the
coated upper and lower control arms coil-overs outside of
manufactured from 12-gauge HSLA the frame rail, closer to the wheel
steel tubing along with QA1 performance providing more cornering ability. The stock factory
ball joints and maintenance -free arms are replaced with 7-gauge DOM steel tubular
polymer bushings. The kits add up to 7° design arms with an integrated pinion angle adjustment,
of caster for more stability and allows eliminating the need for angled shims. Kits are available
for optimum camber adjustment in a lowered truck. with either single or double adjustable Pro Coil shocks.
Manufactured with either single- or double-adjustable Bolt-in C-notch allows for up to 6" of total drop. Kits
coil-over shocks that allow changing the valving to meet include adjustable shocks, high-travel springs, coil-over
specific needs, along with a variety of high-travel spring hardware, truck arms, panhard bar, brace bar, C-notch
rates. Hardware and all required nuts and bolts are kit, and all necessary installation hardware. Made in USA.
included. Made in USA.
Part No. Description
Part No. Application Rear Suspension Kit, Single-Adjustable Pro Coil
1963-87 Chevy C10 Coil-Over Conversion Kit, QA1R110-200
QA152611-D750 Shocks, 200-lb. Spring Rate
Double-Adjustable Shocks, 750-lb. Spring Rate Rear Suspension Kit, Double-Adjustable Pro Coil
1963-87 Chevy C10 Coil-Over Conversion Kit, QA1R210-200
QA152611-S750 Shocks, 200-lb. Spring Rate
Single-Adjustable Shocks, 750-lb. Spring Rate

Chevy C-10 1963-87 Front Sway Bar Kit

Chevy C10 1963-72
Rear Coil-Over Conversion Kits QA152896
Manufactured
These rear coil-over
from lightweight
conversion kits include
hollow-core 1-3/8"
specially designed
4130 chromoly steel
mounting brackets
for maximum strength and
and single- or double-
durability. CNC forming ensures
adjustable aluminum
easy bolt-on installation with no drilling required. Kit
shocks, as well as an
includes greasable graphite polyurethane bushings and
adjustable vehicle-
high-quality plated hardware. Black powder-coated finish
specific panhard bar.
only. Made in USA.
Shocks utilize a fully
threaded body to allow ride height adjustability. Kits
include all necessary hardware required for installation.
Made in USA.
Part No. Description
Rear Coil-Over Conversion Kit, Single-Adjustable Pro Coil
QA1RCK52612
Shocks, 200-lb. Spring Rate
Rear Coil-Over Conversion Kit, Double-Adjustable Pro
QA1RCK52616
Coil Shocks, 200-lb. Spring Rate

2023 - 2024 HOT ROD AND EARLY MUSCLE 419

 Engine Mounts for 1965-72 Ford F100 Coil-Over
Rear Coil-Over Conversion System Conversion Kits
for 1973-87 Chevy C10 Interchangeable engine mounts
A true bolt-on, rear coil- allow use of a variety of engines
over conversion system with the QA1 coil-over conversion
that offers dramatically kit. Make installation of FE,
improved ride and Windsor, MOD/Coyote, or LS
handling. System utilizes engines easy and eliminate the
a torque arm design that allows guesswork and fabricating.
smooth suspension travel without Part No. Engine
the possibility of bind. A fully fabricated differential QA17740-251 FE
cover with integrated mount provides seamless torque QA17740-252 5.0 Windsor
arm mounting. Panhard bar, torque arm, trailing arms, QA17740-253 Modular / Coyote
bracket mounts and shocks are all adjustable, and truly
independent of each other. Kits offer 4"-7" lowered Rear Coil-Over Conversion Systems for 65-72
stance and are offered with choice of single- or double-
adjustable shock absorbers for pickups using GM 10-,
Ford F100
12-bolt or Ford 9" differentials.
Part No. Description
Coil-Over Suspension, Single-Adjustable Shocks
QA1R130-200 10-Bolt GM Rear, 200-lb. Spring Rate
QA1R131-200 12-Bolt GM Rear, 200-lb. Spring Rate
QA1R132-200 Ford 9" Rear, 200-lb. Spring Rate
Coil-Over Suspension, Double-Adjustable Shocks
QA1R230-200 10-Bolt GM Rear, 200-lb. Spring Rate
QA1R231-200 12-Bolt GM Rear, 200-lb. Spring Rate
QA1R232-200 Ford 9" Rear, 200-lb. Spring Rate

Rear Sway Bar Kit for 1973-87 Chevy C10

QA152899
Engineered specifically
for 1973-87 Chevy
C10's fitted with QA1's Improve ride and handling with this bolt-in kit! The QA1
new rear suspension conversion kit uses a torque arm design that provides
system, 1-1/4" dia. x smooth suspension travel and eliminates bind. Achieves
3/16" wall chrome moly a 4”-7” lower stance with independent adjustments to
steel sway bar reduces panhard bar, torque arm, trailing arms, bracket mounts,
body roll and improves and shock absorbers. Available with single- or double-
cornering ability. Sway bar has a gloss black powder coat adjustable coil-over shocks.
finish, and includes greasable polyurethane bushings and
necessary hardware. Part No. Description
Coil-Over Suspension, Single-Adjustable Shocks
QA1R120-200 200-lb. Spring Rate
Front Coil-Over Conversion Systems for QA1R120-250 250-lb. Spring Rate
1965-79 Ford F100 Coil-Over Suspension, Double-Adjustable Shocks
QA1R220-200 200-lb. Spring Rate
Upgrade the QA1R220-250 250-lb. Spring Rate
performance and
handling and dial
in the perfect
Rear Sway Bar Kit for 1965-72 Ford F100
stance with an QA152866
adjustable ride Designed for use with
height! Bolt-in the QA1 rear coil-over
system saves over 150 conversion kit, this
lbs. compared to stock and chrome moly steel
allows use of larger wheels and tires sway bar reduces
without issues. Kits include upper and lower tubular body roll and
control arms, upper and lower crossmembers, rack and improves
pinion steering, single- or double-adjustable coil-over cornering. With
shocks and springs, and standard or drop spindles. a gloss black
Spring powder-coated finish for
Double-Adjustable Part No. Single-Adjustable Part No.
Rate corrosion protection, the
With Standard Spindles (3"-5" of Drop) sway bar includes greasable
500 — QA152620-S500 polyurethane bushings and all needed mounting
With Drop Spindles (5"-7" of Drop)
hardware.
500 QA152621-D500 QA152621-S500
600 QA152621-D600 —

420 2023 - 2024 HOT ROD AND EARLY MUSCLE

Pro-Coil Single Adjustable Pro-Coil Rear Coil-Over
Front Coil-Over Conversion Conversion Systems
Systems Pro Coil systems feature twin-tube shocks
Pro Coil systems feature twin-tube with a threaded aluminum body, paired
shocks with a threaded aluminum with lightweight high-travel springs, for
body, paired with lightweight improved handling and reduced unsprung
high-travel springs, for improved handling and reduced weight. 18-stage rebound adjustment allows for precise
unsprung weight. 18-stage rebound adjustment allows setting to match driving style and road/track conditions.
for precise setting to match driving style and road/track Threaded shock body allows ride height adjustment to
conditions. Threaded shock body allows ride height set the perfect stance or tweak the weight balance for
adjustment to set the perfect stance or tweak the weight optimal handling. Made in the U.S.A.
balance for optimal handling. Made in the U.S.A. Part No. Description Rate
(lbs-in)
Rate GM Applications
Part No. Description (lbs-in)
Front Shock Kit for 1964-72 GM A-Body/
GM Applications QA1RCK52336 150
G-Body, Double-Adjustable
QA1GS401-10400B Front Shock Kit for 1968-72 GM A-Body 400
Front Shock Kit for 1964-72 GM A-Body/
QA1GS401-10400C Front Shock Kit for 1973-83 GM A-Body 400 QA1RCK52341 175
G-Body, Single-Adjustable
QA1GS401-10500A Front Shock Kit for 1967-74 GM F-Body 500
Rear Shock Kit for 1978-96 GM B-Body,
QA1GS501-10400C Front Shock Kit for 1967-81 GM F-Body 400 QA1RCK52384 250
Single-Adjustable
QA1GS507-09450D Front Shock Kit for GM A-Body/G-Body 450 Ford Mustang
Replacement Shock Front Shock Kit for 1979-04
QA1GS501 Single-Adjustable Shock Only, Each QA1RCK52348 110
Ford Mustang, Single-Adjustable

Rear Trailing Arms

Rear trailing arms are manufactured from .120" wall steel tubing for maximum strength and
fitted with greasable, graphite/polyurethane bushings for strength and maximum traction.
Adjustable trailing arms allow setting desired pinion angle for maximum traction.
Part No. Description
Lower Trailing Arms
QA15221 1979-93 Mustang; 1979-86 Capri; 1980-88 T-Bird/Cougar, Box Style
Upper Trailing Arms
QA15255 1979-93 Mustang; 1979-86 Capri, Adjustable

Billet Metering Blocks

Metering blocks are CNC-machined
from aluminum billet, eliminating
porosity. Standard calibration
metering blocks have race breed emulsion calibration
directly pre-drilled. Adjustable units feature screw-in
emulsion bleeds that may be changed to optimize fuel
Performance Carb Rebuild Kits curve.
QFT3-200 Part No. Description
Performance rebuild kits include Single Inlet/Side Pivot Float 4bbl, Vacuum Secondary 4bbl,
QFT34-2
Center Squirter 4bbl. Includes Notched Float
precision die-cut, non-stick
QFT34-106 E85 Billet Metering Block Conversion Kit
gaskets, ISO-9000 machined
needle and seat assemblies,
and quality accelerator pump Billet Fuel Pressure Regulator
diaphragms. QFT30-1803
Description CNC-machined billet aluminum pressure
Fits Model 4160 (Secondary Metering Plate) 390-850 CFM Vacuum regulator relies upon high-flow ball-and-
Secondary Carburetors; Road Demon, Road Demon Jr., and Vacuum stem activation and has sufficient flow to
Secondary Speed Demon. Replaces Holley 37-119, 37-720, 37-754 and supply engines with up to 900 horsepower.
37-1542, And Barry Grant 190003

Carburetor Gaskets SS-Series Dual Feed Fuel Line

Recommended for racing QFT34-6000SS
applications, non-stick, blue fuel Fuel line kit incorporates
bowl and metering block gaskets silver anodized AN fittings
are coated with fluorocarbon. and durable, stainless steel
Part No. Description braided hose. Accepts
QFT8-134
Fuel Bowl Gaskets, Model 2300, 4150, 4150HP, 4500, -6AN hose. Fits Q-series,
4500HP, Pair SS series, and all other 4150-style carburetors with dual
QFT8-25 Power Valve Gasket, Non-Stick, Each metering blocks and 7/8"-20 threaded fuel bowls.
2023 - 2024 HOT ROD AND EARLY MUSCLE 421
Hot Rod Series Super Street Carburetors
Carburetors Specifically designed for
Hot Rod Series die-cast high-performance street or
aluminum bodied 4-barrel street/strip operation, Super
carburetors combine Street carburetors have been
exceptional performance with developed using years of
show-winning appearance. successful race track experience.
Carburetors are offered in choice Carbs combine billet metering blocks,
of mechanical or vacuum secondary billet throttle body, all-aluminum Proform main body,
design and feature electric chokes, built-in sight glasses, and dual inlet aluminum fuel bowls. Changeable air
dual metering blocks, and four-corner idle. Tumble bleeds, tuneable secondary opening rate, and power
polished finish provides a long-lasting shine. valve channel restrictions allow exceptional tuneability.
Offered in vacuum and mechanical secondary versions
Part No. Description
with conventional or annular boosters.
Vacuum Secondary Models
QFTHR-580-VS 580 CFM, 1.312" Venturi, 1-9/16" Throttle Bore Mechanical
Mechanical Secondaries/ Vacuum
QFTHR-680-VS 680 CFM, 1.312" Venturi, 1-11/16" Throttle Bore Secondaries Annular Secondaries
QFTHR-780-VS 780 CFM, 1.375" Venturi, 1-11/16" Throttle Bore Description Part No. Part No. Part No.
Mechanical Secondary Models 650 CFM QFTSS-650 QFTSS-650-AN —
QFTHR-600 600 CFM, 1.312" Venturi, 1-9/16" Throttle Bore 680 CFM — — QFTSS-680-VS
QFTHR-650 650 CFM, 1.312" Venturi, 1-11/16" Throttle Bore 735 CFM — — —
QFTHR-750 750 CFM, 1.375" Venturi, 1-11/16" Throttle Bore 750 CFM QFTSS-750 QFTSS-750-AN —
780 CFM — — QFTSS-780-VS
Black Diamond SS-
Series Carburetors Street Q-Series Carburetors
Five pounds lighter than other Lightweight die-cast aluminum
carburetors, Black Diamond components. Changeable idle and
SS-Series carburetors feature high-speed air bleeds. Vacuum &
a unique, satin black PTFE mechanical secondary models.
coating that actually reduces 2-circuit metering - 4-Corner
fuel temperature and resists idle system. Downleg boosters.
impact and scratches. The billet Universal throttle lever design fits Ford
throttle bodies with secondary idle adjustment, metering A/T Kickdown, 700-R4 mounting holes -
blocks with changeable idle feed, power valve restrictors, accepts brackets for Chrysler vehicles.
and idle and high-speed air bleeds provide ultimate Part No. Description
tuning. Other standard features include a 4-corner idle QFTSQ-650 650 CFM
system and secondary jet extensions with notched QFTSQ-750 750 CFM
QFTSQ-850 850 CFM
secondary floats and fuel bowls with a single sight glass
QFTSQ-950 950 CFM
window. Mechanical secondary carburetors have dual-
inlets, dual-sight glasses, and 4500-style fuel bowls.
Fuel Pressure Regulator
Part No. Description
Mechanical Secondary Models QFT30-803
QFTBD-650 600 CFM, Electric Choke, 4-Barrel Capable of satisfying the fuel supply needs
QFTBD-750 750 CFM, Electric Choke, 4-Barrel of single four-barrel applications with up
QFTBD-850 850 CFM Electric Choke, 4-Barrel to 900 horsepower. Regulator features
Vacuum Secondary Models
ball-and-stem activation and incorporates
QFTBD-680-VS 680 CFM, Electric Choke, 4-Barrel
QFTBD-780-VS 780 CFM, Electric Choke, 4-Barrel
a high quality, GFLT diaphragm assembly for steady,
consistent fuel flow.
Black Diamond Q-Series Carburetors
Extremely tunable, Slayer Series Carburetors
Q-Series carburetors have The Slayer Series offers affordable
4-corner idle systems, aluminum carburetors for
secondary jet extensions, performance enthusiasts on a
and notched secondary tight budget. Features include
floats. The Black Diamond's changeable idle air and high-
satin black PTFE coating speed bleeds, built-in sight glass
reduces fuel temperature 6% for float adjustment, 3-stage
and resists impacts, scratches, emulsion circuits in the primary
and underhood chemicals. The Q-series also features metering block, and changeable primary idle feed
Proform main bodies, downleg boosters, screw-in idle restrictions and power valve channel restrictions. Both
and high-speed air bleeds, accelerator pump discharge the 600 and 750 CFM models have vacuum secondaries
nozzles, and blended venturii areas. and adjustable, one-wire electric chokes.
Part No. Description Part No. Description
QFTBDQ-750 750 CFM, Mechanical Secondary, 4-Barrel QFTSL-600-VS 600CFM, 1.312" Venturi, 1-9/16" Throttle Bore
QFTBDQ-850 850 CFM, Mechanical Secondary, 4-Barrel QFTSL-750-VS 750CFM, 1.375" Venturi, 1-11/16" Throttle Bore
QFTBDQ-950 950 CFM, Mechanical Secondary, 4-Barrel

422 2023 - 2024 HOT ROD AND EARLY MUSCLE

Ring & Spade Terminals Heavy-Duty Automatic
Ideal for custom wiring tasks, ring, and spade Wire Stripper Pliers
terminals are available in a variety of sizes. QRP57-450
Terminals are complete with heat-shrink. Sold QRP50-393
in pairs. Heavy-duty 6" pliers quickly strip 8-18 gauge wires for
termination. A bolt-on depth-adjustment guide provides
Wire QRP57-470
Part No. Description Range Stud Size Tab consistent, reliable strip length.
Width
(Gauge)
QRP57-450 Ring Terminal #12-10 #6 (.148") —
QRP57-470 Ring Terminal #12-10 #10 (.200") — QRP57-471 Terminal Buss Bar
QRP57-801
QRP57-471 Ring Terminal #16-14 #8 (.174") — Glass-filled nylon Buss Bar
QRP57-472 Ring Terminal #16-14 #10 (.200") — with 12 connection terminals,
QRP57-473 Ring Terminal #16-14 3/8" — QRP57-475 each able to handle up to
QRP57-474 Ring Terminal #10-8 3/8" — 15 amps continuously. 1/4"
QRP57-475 Ring Terminal #10-8 #10 (.200") — stainless steel terminal post
QRP57-476 Ring Terminal #22-16 #6 (.148") — and (12) #8-32 stainless steel
QRP57-478 Ring Terminal #16-14 1/4" — QRP57-476
attaching screws. QRP57-802
QRP57-479 Ring Terminal #16-14 5/16" —
QRP57-481 Ring Terminal #8 1/4" — Part No. Description
QRP57-801 Red Buss Bar
QRP57-490 Ring Terminal #8 5/16" — QRP57-472
QRP57-802 Black Buss Bar
QRP57-510 Ring Terminal #8 3/8" —
QRP57-8012 Red Terminal Buss Bar with Covers
QRP57-942 Female Spade #16-14 — .259"
QRP57-8022 Black Terminal Buss Bar with Covers
QRP57-943 Male Spade #12-10 — .250"
QRP57-473
QRP57-944 Female Spade #12-10 — .259"
QRP57-945 Male Spade #16-14 — .250" Stud Feed-Through
QRP57-474 QRP57-800
Rubber Firewall Grommet Set Designed for use where a
QRP50-008 12-volt power source must
Protect wires pass through a panel (i.e.
and gauge lines firewall). Requires a 1-1/4"
from sharp metal diameter hole. Includes a
edges. Three-piece 3/8"-16 stainless steel stud.
firewall grommet set includes one each of 3/4", 1-1/8", and Red. Each.
1-5/8" O.D. grommets. Black rubber. Part No. Description
QRP57-700 Stud Feed-Through, Black
QRP57-800 Stud Feed-Through, Red
HEI Distributor Lead
QRP50-2009 Pass-Through Posts
Four-foot-long lead easily Pass-through post allows running electrical
connects a HEI distributor to wires neatly through firewall or other panels.
ignition switched power and the Post has a nickel-plated, 3/8" stud and a
tachometer signal wire. 250-amp max rating. Offered in red or black.
Each.
In-Line ATC Fuse Holder Part No. Description
QRP57-803 Pass-Through Post, Red
QRP50-955 QRP57-804 Pass-Through Post, Black
Waterproof fuse holder is built
into 12-gauge wire. Includes 5, 10, Multi-Recall Digital Tachometer
15, 20, 25, and 30-amp ATC fuses.
QRP611-106
Alternator Wire Kits Innovative
tachometer
Universal alternator wire kit
combines the
includes 9' of 8-gauge wire,
benefits of a
ring terminals, and boot. Kit
compact, 4”W
with quick disconnect eases
x 2-1/2”H size
engine swaps.
with an easy-to-
Part No. Description read, digital backlit display and a programmable RPM
QRP57-105 Alternator Wire Kit with Quick Disconnect
warning/shift light. Once the engine is shut off, the tach
QRP57-106 Alternator Wire Kit
displays the (10) highest and (10) lowest RPM readings
from the previous race, aiding car set-up. An RPM graph
allows scrolling, selecting, and replaying all RPM events
as desired. Compatible with multiple engine cylinder
configurations.

2023 - 2024 HOT ROD AND EARLY MUSCLE 423

Power Rings Battery Cable Boots
Heavy-duty, gold-plated copper ring terminals. Sold in QRP57-604
pairs with heat-shrink tubing.
Cover the terminals on small
Part No. Description terminal batteries or starter solenoid
2-Gauge
connections. The boots accommodate
QRP57-540 5/16"
QRP57-550 3/8"
up to 2-gauge cable. Sold as a pair, one red, and one
QRP57-560 1/2" black.
4-Gauge
QRP57-520 5/16" Remote Jumper Posts
QRP57-525 1/4" Provides remote access to the
QRP57-530 3/8"
battery. Terminals have insulated
QRP57-535 1/2"
covers to prevent accidental
contact from parts with opposing
Impact Crimper polarity.
QRP64-020 Part No. Description
Excellent for crimping standard power QRP57-701 Red
rings onto battery cables for permanent QRP57-702 Black
termination.
Charging Post Mounting Brackets
Battery Cable Kits Charging post brackets
These kits include fifteen feet of allow QRP57-703 remote
red power cable, two feet of charging posts to be
black ground cable, one pair of conveniently mounted.
nickel-plated marine-style Machined aluminum
battery terminals, nine brackets are black anodized
gold-plated power ring and offered in flat, for mounting to a
terminals, and heat shrink flat surface, or bent for mounting on firewall or inside
tubing. Copper battery of a trunk, The brackets have two holes to accept red
cables. and black remote charging posts. Brackets may also be
purchased with charging posts.
Part No. Description
QRP57-008 4-Gauge, Side Mount Part No. Description
QRP57-009 4-Gauge, Top Post Mount QRP57-708 Flat Mounting Bracket
QRP57-010 2-Gauge, Top Post Mount QRP57-709 Bent Mounting Bracket
QRP57-011 2-Gauge, Side Mount QRP57-718 Flat Mounting Bracket With Charging Posts
QRP57-719 Bent Mounting Bracket With Charging Posts

Side-Mount Battery Terminals

QRP57-660 Battery Quick Disconnects
Battery terminals are 24K gold- Allows for quick battery
plated for optimum conductivity. change as well as battery
Side mount terminals allow you to charging and anywhere a
attach cables to GM-style side- quick disconnect is helpful.
mount batteries. Comes with nut Typically three are used on a
and lock washers for 5/16" studs. Long stud allows use of race car, one for the battery
multiple or thick power ring connectors. Pair. end, one for the car end, and
one for a spare battery or battery
Top-Mount charger.
Battery Terminals Part No. Description
QRP57-705 2AWG
Made from solid brass and 24K
QRP57-706 4AWG
gold- or nickel-plated for optimum QRP57-704 8AWG
conductivity. The terminals allow
attaching battery cables to top-
mount batteries. Sold in pairs.
Firewall Grommets
Part No. Description
QRP57-610 Brass/Nickel-Plated Terminals
Mounts to the firewall and locks onto the
QRP57-620* Brass/Gold-Plated Terminals wire that passes through the bushing.
QRP57-630 Nickel/Brass Terminals, Bolt-On Water- and Vibration-proof.
QRP57-640 Nickel/Brass Terminals, Solder-On Part No. Description
QRP57-607 Battery Terminal Covers—Contoured (1 Red, 1 Black) QRP57-810 8-12 AWG
QRP57-627 Battery Terminal Covers—Flat (1 Red, 1 Black) QRP57-820 2-4 AWG
* QRP57-620 has two extra ports for accessory wires. QRP57-830 1/0 AWG

424 2023 - 2024 HOT ROD AND EARLY MUSCLE

Battery Disconnect Boots Weatherproof Switches
Protects battery disconnect from Part No. Description
being accidentally shorted. Pair. QRP50-400 Momentary Micro Switch
Part No. Description QRP50-401 Momentary-Off-Momentary Single-Pole Micro Switch
QRP57-601 Red QRP50-402 Momentary- Off-Momentary Double-Pole Micro Switch
QRP57-602 Black QRP50-410 Single-Pole Micro Switch
QRP50-415 On-Off-On Micro Switch
Heavy-Duty QRP50-417
QRP50-420
On-On Micro Switch
On-On Double-Pole Micro Switch
Starter Solenoid QRP50-422 20-Amp Circuit Breaker
QRP50-430
Impervious to dirt, heat, and Fuel Pressure Isolator
vibration this durable solenoid will QRP61-300
still function while others fail. Specialized isolator eliminates the
hazards associated with driver’s
Master Disconnect compartment-mounted fuel
QRP55-031 pressure gauges. Typically
mounted to the engine side of
Rotary-style battery disconnect
firewall, the isolator is plumbed with
handles up to 160 amps. Panel-
the pressure source on the inlet
mounted 12V switch features a
side and the outlet side uses an anti-freeze/water mix
removable silver-colored key. Sold
to actuate the gauge. Compatible with gasoline, alcohol,
each.
and methanol fuels. The black billet aluminum isolator is
capable of monitoring pressures up to 80 PSI. The unit
HD Switch with Flip-Up includes -4AN adapter fittings, mounting brackets and
Switch Cover necessary hardware.
QRP50-520
Heavy-duty switch features an Pressure Gauge Line Kits
aircraft-type, flip-up switch cover. Each kit contains two 1/8" NPT to
-4AN adapter fittings along with
-4AN stainless steel braided line to
HD Switch with Black Switch connect pressure gauges. Available
Cover in several lengths.
QRP50-522 Part No. Description
Heavy-duty switch includes a QRP61-71012 12"
QRP61-71024 24"
weatherproof black switch cover.
QRP61-71036 36"
QRP61-71048 48"
QRP61-71060 60"
Mini Fuel Pressure Gauges
Ideally mounted to fuel pressure 8-Terminal Power Distribution Post
regulators or fuel logs, mini 1-1/2"
diameter fuel pressure gauges are
QRP57-806
liquid-filled for added durability. 180-amp maximum with 20 amps
per connection max. Glass-filled
Part No. Description nylon base with nickel-plated copper
QRP611-9015 0-15 PSI QRP611-9015
QRP611-90100 0-100 PSI
connection plate. 5/16" stainless
steel connection post and (8) #8-32
stainless steel screws.

Power Distribution Stud

QRP57-807
Connect two or more voltage cables
QRP611-90100 together. Glass-filled nylon base
with 3/8" stud. 160 amps maximum.

2023 - 2024 HOT ROD AND EARLY MUSCLE 425

1/8"NPT Pressure Gauge Weather Pack Pin Tool Remover
Line Kits QRP50-399
The kits are designed to The handy tool removes contact pins from
connect pressure gauges and Weather Pack connector housings.
are offered with copper or nylon
tubing. Complete with required fittings. Top-Post Battery Master Disconnect
Part No. Description QRP57-650
QRP61-710 Nylon Gauge Line Kit
QRP61-7101 Copper Gauge Line Kit
Solid brass terminal connects to the
QRP61-724 1/8"NPT Female to -4AN Male Gauge Adapter (Each) negative post for easy installation
QRP61-725 1/8"NPT Male to -4AN Male Gauge Adapter (Each) and quick power disconnection.
Simply loosen knob to disconnect
Pressure and Temperature power, tighten to reconnect. Rated for 125
amps on standard 12VDC systems.
Gauge Panel Switches
Deutsch Connectors
Fuel Pressure Kit Durable, precision connectors
include male and female housing
QRP61-719 ends with indexed locks. The
Kit includes a green secure-locked connection seals
warning light, pressure out out dirt and moisture. Kits
sending unit that are sold complete with terminals,
activates the warning silicone rubber seals, and strong
light if fuel pressure drops below 4 PSI, brass in-line tee, crimp tabs for 12-18 gauge wires.
and necessary pre-terminated wiring.
Part No. Description
QRP71-322 2-Pin
Oil Pressure Kit QRP71-332 3-Pin
QRP71-342 4-Pin
QRP61-711 QRP71-362 6-Pin
Kit includes a red warning
light, pressure sending
unit that activates
Electric Fan Relay Kit
the warning light if oil QRP60-039
pressure drops below 20 PSI, brass in-line tee for oil The kit includes 40-amp
pressure line, and necessary pre-terminated wiring. relay, adjustable water
temperature sender, and
Water Temperature Kit wiring harness.
QRP61-712
Kit includes a blue warning
Throttle Stop Bracket
light, temperature sending unit QRP64-157
that activates the warning light if CNC-machined black
water temperature exceeds 235°F, and anodized aluminum bracket
necessary pre-terminated wiring. with adjustable throttle
stop for 4-barrel Holley
Oil Temperature Kit carburetors.
QRP61-714
Kit includes an amber warning
Throttle Return
light, temperature sending unit Spring Kit
that activates the warning light if QRP65-096
oil temperature exceeds 280°F, Includes carburetor
and necessary pre-terminated count bracket, four
wiring. return springs, and
required hardware.
Weather Pack Kit
QRP50-380 Throttle
230-piece kit includes a wide Return Springs
variety of 1-, 2-, 3-, 4-, and 6-pin
connectors, housing cable
QRP64-169
seals, and contact pins. Two throttle return springs.
Includes plastic carrying
case.

426 2023 - 2024 HOT ROD AND EARLY MUSCLE

SFI-Approved Lightweight Steel Bellhousings
Spun steel bellhousings are light and extremely strong. Work hardened to over 80,000 PSI, they will
maintain their rigidity to prevent horsepower loss and excessive wear. Bellhousings meet stringent SFI 6.1
specifications and include inspection cover, pivot ball, and grade 8 hardware.
Part No. Engine Clutch Transmission Wt.
QTMRM-6010 SB/BB Chevy, 153-T 10-1/2" Dia., Internal Hyd. Only Jerico/B-W T-10/TKO 500/600 18 lbs.
Muncie, Richmond, Saginaw, Jerico
QTMRM-6020 SB/BB Chevy, LT-1 10-1/2" Dia. Stock Shifter Fork and Throwout Bearings 18 lbs.
5-6 Spd.
QTMRM-6022 SB/BB Chevy, 153/168-T 11" Dia., LH Clutch Fork/Hyd. Rel. Bearing Jerico/BW-T-10/TKO 500/600 22 lbs.
QTMRM-6023 SB/BB Chevy, 153/168-T 11" Dia., Hyd. Release Bearing T-56 LS1 22 lbs.
QTMRM-6036 Chevy LS, 153/168-T 11" Dia., LH Clutch Fork/Hyd. Rel. Bearing Jerico/BW-T10/TKO 500/600 22 lbs.
SB Ford 302-351W,
QTMRM-6060 10-1/2" Dia., Mech. Fork Linkage T-5 Mustang/TKO 500/600/TR 3550 20 lbs.
351C, 157-T
QTMRM-8020* GM LS 11" Dia., Mech. Fork Linkage LS1/T-56/T-56 Magnum 22 lbs.
QTMRM-8031 SB Ford, 157-T 10-1/2" Dia., Ford Clutch Fork or Cable T-56, Clutch Fork at 7:00 Position 20 lbs.
QTMRM-6065 SB Ford, 157-T 10-1/2" Dia., Ford Clutch Fork or Cable TKO 500/600/TR-3550/T-5 22 lbs.
QTMRM-6035 Chevy LS, LT1-1, LT-4 1997-04 Corvette Manual Transmission —
* Bellhousing eliminates hydraulic clutch, using Chevy push style clutch fork.

Exhaust Cut-Outs Electric Exhaust Cut-Out Kits

Polished stainless steel, weld-on, and These electric aluminum exhaust cut-
includes block-off plates as well as out kits include an electric motor, a
hardware. Each. wiring harness with an interior toggle
Part No. Description switch, and are designed to bolt-on
QTP10225 2-1/4" Dia. (except for low-profile oval design) to
QTP10250 2-1/2" Dia. the exhaust system.
QTP10300 3" Diameter Part No. Description
QTP10350 3-1/2" Dia. QTPQTEC25 3-Bolt,2-1/2" Dia., Each
QTPQTEC30 3-Bolt, 3" Dia., Each
Exhaust Cut-Out Cap QTPQTEC33
Low-Profile Oval, 2-1/2" to 3" Dia., Weld-On,
Zinc-plated steel. Bolt-on. Each. Aluminum/Stainless, Each
QTPQTEC35 3-Bolt, 3-1/2" Dia., Each
Part No. Description QTPQTEC40 3-Bolt, 4" Dia , Each
QTP10250C 2-1/2" Dia. QTPQTEC50 3-Bolt, 2-1/2" Dia., Pair
QTPQTEC60 3-Bolt, 3" Dia., Pair
Low-Profile Oval, 2-1/2" to 3" Dia., Weld-On,
QTPQTEC66
Exhaust Turn Downs Aluminum/Stainless, Pair
Bolt-on. Polished stainless steel. Each.
Part No. Description Wireless Exhaust Cut-Out Remote Kit
QTP11250 3-Bolt, 2-1/2" Dia. Control the exhaust cutouts with a variable control
QTP11300 3-Bolt, 3" Dia. wireless remote key fob. Kit includes Quicktime
Performance electric cutout kit, the cut-out receiver,
Header Flanges and two key fobs.
Round port. Zinc-plated steel. Each. Part No. Description
QTP10900 Black
Part No. Description
QTP10250F 2-1/2" Dia. QTP10901 Red
QTP10300F 3" Dia.
QTP10400F 4" Dia.
Electric Exhaust Cut-Out Components
Collector Gaskets Part No. Description
3-inch diameter. Graphite. Each. QTPIWIRE Wiring Harness, 14' Long, Each
Part No. Description QTPMOTORKIT Electric Motor, Each
QTP10300G 3-Bolt Collector, Each QTPSWITCH2 Dual Toggle Switch, Each

QTPSWITCH2
Electric Exhaust Cut-Out Butterfly
Stainless steel construction.
Part No. Description
QTP30BFLYKIT 3" Dia.
QTP33BFLYKIT Low-Profile Oval

2023 - 2024 HOT ROD AND EARLY MUSCLE 427

Small Block Chevy Engine Dress-Up Kit Small Block Chevy Polished
Kit fits 1959-86 small block Aluminum Valve Covers
Chevy 283-350. Offered with Heavy-duty cast
choice of short or tall valve aluminum valve covers
covers. look great and provide
Kit Includes: excellent gasket seal.
• One Pair Chrome Steel Choose from short (2-
Valve Covers (Baffled) 11/16") or tall (3-11/16"), RPCR6131
• One Chrome Steel Timing Chain Cover and baffled or unbaffled
• One Chrome Steel Timing Tab styles. Tall covers will clear stud girdles. Includes
• One Chrome Steel Engine Dipstick with Tube grommets.
• One Chrome Steel Push-In Breather Cap
Part No. Description
• One Rubber Push-In Breather and PCV Grommet RPCR6130 Ball Milled with Hole, Tall, Unbaffled
Part No. Description RPCR6130C Ball Milled with Hole, Tall, Baffled
RPCR3023 Short RPCR6131 Ball Milled with Hole, Short, Baffled
RPCR3024 Tall RPCR6030-1 Plain, No Hole, Tall, Unbaffled
RPCR6130-2 Plain with Hole, Tall, Baffled
Big Block Chevy RPCR6131-2 Plain with Hole, Short, Baffled

Engine Dress-Up Kit

Small Block Chevy Aluminum
RPCR3026
Kit fits 1965-95 big block
Recessed Valve Covers
Chevy 396-502. Tall valve Baffled aluminum valve
covers. covers fit 1958-86 small
Kit Includes: block Chevy 283, 305, 327, RPCR6154

• One Pair Chrome Steel Valve Covers (Baffled) and 350. Covers are polished
• One Chrome Steel Timing Chain Cover and tall (3-11/16"). Includes grommets.
• One Chrome Steel Timing Tab Part No. Description
• One Chrome Steel Engine Dipstick with Tube RPCR6152 Plain With Hole
RPCR6154 Ball Milled With Hole
• One Chrome Steel Push-In Breather Cap
• One Rubber Push-In Breather and PCV Grommet
Small Block Chevy Polished Aluminum
Chevy Chrome Centerbolt Valve Covers
Dress up the later 1987-up small
Valve Covers block Chevy with rugged,
Sold in pairs, complete with inexpensive valve covers
grommets. RPCR9518 designed specifically RPCR6046
Part No. Description for the centerbolt-style
Small Block Chevy OEM Style, cylinder heads. Bolt kit
RPCR9518
1978-86 305-350, Short with Baffles
Big Block Chevy OEM Style,
and grommets included.
RPCR9503
1965-72 396-454, Short with Baffles Part No. Description
Big Block Chevy OEM Style, RPCR6036 Plain with No Holes, Short, Polished
1965-72 396-454, Short with Baffles and RPCR6037 Ball Milled with Hole, Short, Unbaffled
RPCR9504
Recessed Corner to Fit Corvettes and Cars RPCR6046 Plain with No Holes, Tall, Polished
with Power Brakes RPCR6047 Ball Milled with Holes, with Baffles, Tall, Polished
RPCR6136-1 Plain with Hole, Short, Unbaffled
Chevy Finned Valve RPCR6146-1 Plain with Holes, Tall, Polished
RPCR6046BOLT Stainless Bolt Kit for Tall Covers
Covers
Nostalgic finned covers Valve Cover Hold-Down Tabs
have breather holes
Steel valve cover hold-down tabs for 1987-up small block
and are available to fit
Chevy engines are
small block (1958-86
4-3/4" long. Set of 4.
traditional, and 1987-up
center bolt style) and big
block Chevrolets (1965- RPCR6181
95). Package includes a pair of covers,
fasteners, and one each PCV and breather grommet.
Part No. Description
RPCR6181 Small Block Chevy, 1958-86, Breather Hole, Tall Part No. Description
RPCR4993BK Hold-Down Tab, Black Powder-Coated Finish
RPCR6186 Small Block Chevy, 1958-86, Breather Hole, Short
RPCR4993 Hold-Down Tab, Chrome-Plated Finish
RPCR6191 Small Block Chevy Centerbolt, 1987-Up, Breather Hole, Tall
RPCR6196 Small Block Chevy Centerbolt, 1987-Up, Breather Hole, Short
RPCR6280 Big Block Chevy, 1965-95, Breather Hole, Tall

428 2023 - 2024 HOT ROD AND EARLY MUSCLE

Big Block Chevy Polished Big Block Ford Aluminum Valve Covers
Aluminum Valve Covers Attractive, heavy-duty
Attractive, heavy-duty aluminum tall valve
cast aluminum tall covers provide an
valve covers provide an inexpensive alternative
inexpensive alternative to higher priced covers.
RPCR6330
to higher priced covers. Available in multiple
Smooth, ball milled, and flamed covers are available and finishes, and all include
all include hardware. Includes grommets. hardware and grommets,
if applicable. Sold in
Part No. Description
RPCR6230-1 Plain, No Hole, Tall, Unbaffled
pairs.
RPCR6231 Ball Milled With Holes, Short, Baffled Part No. Description
RPCR6231-2 Plain With Holes, Short, Baffled Cast Aluminum Valve Covers
RPCR6330 Ball Milled, With Hole, Tall, Baffled RPCR6288 429-460, Clear Anodized, Tall, with Holes
RPCR6288BK 429-460, Black Anodized, Tall, with Holes
RPCR6288POL 429-460, Polished, Tall, with Holes
Small Block Chevy RPCR7680 390-428, Polished, Top Finned, with Holes
“Flat Top" Valve RPCR7680BK 390-428, Black Anodized, Top Finned, with Holes
Covers RPCR7681
390, Polished, Top Finned w/ 390 CID Logo, Baffled,
with Holes
Fits 1958-86 small 390, Black Anodized, Top Finned w/ 390 CID Logo, Baffled,
block Chevy 283-400. RPCR7681BK
with Holes
Constructed with 1/4" 427, Polished, Top Finned w/ 427 CID Logo, Baffled,
RPCR7682
thick billet rail. Comes with Holes
with a breather hole. RPCR7682BK
427, Black Anodized, Top Finned w/ 427 CID Logo, Baffled,
RPCR6145 with Holes
Part No. Description
428, Polished, Top Finned w/ 428 CID Logo, Baffled,
RPCR6145 3-3/4", Tall, Clear Anodized RPCR7683
with Holes
RPCR6145C 3-3/4", Tall, Chrome
428, Black Anodized, Top Finned w/ 428 CID Logo, Baffled,
RPCR6145POL 3-3/4", Tall, Polished RPCR7683BK
with Holes
Fabricated Aluminum Valve Covers
RPCR6355 460, Satin Finish, Clear Anodized, Tall, No Holes
RPCR6355POL 460, Polished, Tall, No Holes
Big Block Chevy Valve RPCR6355C 460, Chrome, Tall, No Holes
RPCR6357POL 429-460, Polished, Tall, with Holes
Covers Replacement Hardware Kit for Fabricated Valve Covers,
Fits 1965-95 396, 427, 454, RPCR6355BOLT
RPCR6248 Allen Head
and 502 engines.
Part No. Description Ford Finned Valve Covers
RPCR6248 3-1/2", Tall, Clear Anodized
RPCR6248C 3-1/2", Tall, Chrome RPCR7638
RPCR6248POL 3-1/2", Tall, Polished Nostalgic finned covers have breather holes and are
available to fit for the 351 Cleveland engine. Package
includes a pair of covers with fasteners. Polished finish.
Big Block Chrysler
Valve Covers LS-Series Cast Aluminum Valve Covers
Fits 1958-78 big block Heavy-duty cast aluminum valve covers look great
Chrysler V8 350, 361, 383, and provide excellent
426, 413, and 440 wedge. gasket seal. Low-profile
Hardware included. (2-1/2") will clear most
aftermarket valve trains.
Part No. Description
3-1/4", Tall,
Includes billet oil fill
RPCR6247 cap, O-ring gaskets, and
Clear Anodized
RPCR6247POL 3-1/4", Tall, Polished mounting hardware.
Sold in pairs.
Big Block Ford Engine Dress-Up Kit Note: Ignition coil relocation required.

RPCR3041 Part No. Description

RPCR6369BK Valve Cover Set, Black Anodized Flinish
Kit fits 1968-Up big block
RPCR6369C Valve Cover Set, Chrome Finish
Ford 429-460. Tall valve RPCR6369G Rubber Gaskets for LS-Series Valve Covers (Pair)
covers.
Kit Includes:
• One Pair Chrome Steel
Valve Covers (Baffled)
with Hold-Downs
• One Chrome Steel Push-In
Breather Cap
• Two Rubber Push-In Breather and PCV Grommets

2023 - 2024 HOT ROD AND EARLY MUSCLE 429

GM LS-Series Engine Polished Aluminum Push-In Oil Cap
Valley Cover Plates RPCR6250
Valley cover plate, made Fits valve covers with 1-1/4" holes when
from 1/4" thick billet using grommets.
aluminum, is required when
converting from EFI to
carburetion on late model GM Nostalgic Polished
LS engines. Sold complete with stainless fasteners, plate
is offered with natural, polished, or black finish. Billet Aluminum Breathers
Part No. Description
Fits valve covers with 1-1/4" holes. Use
RPCR5310 † LS1 Engine Valley Cover Plate, Natural Aluminum RPCR4996 or RPCR9358X grommets.
RPCR5310BK † LS1 Engine Valley Cover Plate, Black Anodized Part No. Description RPCR6504
RPCR5315 LS3 Engine Valley Cover Plate, Finned, Polished Aluminum RPCR6504 With PCV Tube
RPCR5315BK LS3 Engine Valley Cover Plate, Finned, Black Anodized RPCR6509 Without PCV Tube
RPCR5320 LS1/LS6 Engine Valley Cover Plate, Polished Aluminum
RPCR5320BK LS1/LS6 Engine Valley Cover Plate, Black Anodized Billet PCV Valve
† Eliminates knock sensors; does not fit Gen. IV engines.
RPCR6008
PCV valve with 3/4" neck, fits 1-1/4" valve cover
GM LS-Series hole when using a grommet.
Adjustable Motor
Mount Adapters Push-In Oil Plug/Cap
Special 3/8" thick billet Fits valve covers with 1-1/4" holes.
aluminum adapter plates No grommet required.
allow installing a 1997-2013 Part No. Description
GM LS Gen. III/IV engine into RPCR9170 No Logo on Top, Chrome Top and Rubber Base
most early GM muscle cars RPCR9787 “Oil” Logo on Top, Chrome Top and Rubber Base
using the popular, 3-bolt
motor mount. Adapters allow four different mounting Valve Cover Rubber Grommet Sets
positions including the OEM location, and three forward Has one PCV grommet and one breather
positions with 7/16" to 2-1/4" of adjustment. Sold complete grommet. Fit valve covers with 1-1/4".
with necessary hardware. Part No Application O.D. I.D.
Part No. Description RPCR4886 Aluminum V/C, 2-Pieces 1-1/4" 3/4"
RPCR5140 Adjustable LS Motor Mount Adapter, Natural Aluminum RPCR4887 Steel V/C, 2-Pieces 1-1/4" 3/4"
RPCR5140BK Adjustable LS Motor Mount Adapter, Black Anodized
Valve Cover Rubber Grommets
Aluminum Linear Wire Looms Fits valve covers with 1-1/4" holes.
RPCR6039 Part No Application O.D. I.D.
PCV Type
Universal looms fit RPCR4998X
RPCR4997* Steel V/C, 2-Pieces 1-1/4" 3/4"
up to 8mm diameter RPCR4998X Aluminum V/C, 2-Pieces 1-1/4" 3/4"
spark plug wire. Plain RPCR4998 Steel V/C, 2-Pieces 1-1/4" 3/4"
polished finishMounting hardware is included. RPCR9760** Steel V/C, 2-Pieces 1" 3/4"
Sold in pairs. Breather Type
RPCR4878* Steel, 2-Pieces 1-1/4" 1"
Aluminum Valve Cover Bung RPCR4880 Steel, 2-Pieces 1-1/4" 1"
RPCR4996 Aluminum V/C, 2-Pieces 1-1/4" 15/16"
RPCR9969 * Must cut bottom of grommet off to work.
Universal bolt-on or weld-on mounting. ** Ford Applications - Fits 1" diameter holes.
Includes oil cap.
Valve Cover Rubber Grommets
Polished Aluminum Push-In Breather with Oil Baffles
RPCR9359
RPCR6101 Fits valve covers with 1-1/4" holes.
Ball-milled, 3/4" neck breather fits 1-1/4" hole. Part No Application O.D. I.D.
PCV Type
RPCR9359X Aluminum V/C, 2-Pieces 1-1/4" 3/4"
Polished Billet Breathers RPCR9359 Steel V/C, 2-Pieces 1-1/4" 3/4"
Breathers for crankcase and PCV have Breather Type
machined, billet aluminum tops and RPCR9358X Aluminum V/C, 2-Pieces 1-1/4" 1"
provide the finishing detail on engines. RPCR9358 Steel, 2-Pieces 1-1/4" 1"
Both versions have rubber bases and
screw-on housings and fit 1-1/4" holes.
Part No. Description
RPCR6500 Polished Finned Billet PCV Breather
RPCR6505 Polished Finned Billet Breather

430 2023 - 2024 HOT ROD AND EARLY MUSCLE

Chrome Steel Push-In Oil Pan Hardware Kits
Open Filter Breather Part No. Description
Rubber base with steel top. Fits valve covers RPCR0006 Small Block Chevy
with 1-1/4" holes. No grommet required.
Part No Style Flexible Engine Dipsticks
RPCR7192 Without Shield, Tall, 2"
RPCR9308 Without Shield, Tall, 3"
Stainless steel dipsticks feature aluminum handles,
braided housings, and bolt to the block of small and big
Chrome Steel Push-In Breathers block Chevys. In natural or black finish.
Fits valve covers with 1-1/4" holes. Part No. Description
RPCR5001 1980-Up, SB Chevy, Natural Finish
Part No. Description
RPCR4870 Push-In Breather, 2-3/4" Dia. with 1" Neck RPCR5001BK 1980-Up, SB Chevy, Black Finish
RPCR9169 Push-In Breather with 5/8" Tube, Mopar Style with 1" Neck RPCR5002 Pre-1979, SB Chevy, Natural Finish
RPCR9171 PCV Push-In Breather, 2-3/4" Dia. with 3/4" Neck RPCR5003 1965-90, BB Chevy, 396, 427, 454, Natural Finish
RPCR9241 Push-In Breather with 5/8" Tube, 2-3/4" Dia. with 1" Neck
LS Engine
Chrome Steel Push-In Oil Filler Cap Oil Bypass Adapter
RPCR4802 RPCR5301
2-3/8" diameter and fits in oil filler tube. Designed to fit Gen III and Gen IV
LS-series engines, 6061 aluminum
Chrome Steel Wing Nuts adapter has -10AN fittings, and includes ports for
temperature sensor and oil feed line. Available with
Part No Style Threads Height
RPCR1006 Deluxe, 4-pieces 1/4"-20 x 1-3/8" 4" male ports.
RPCR4936 T-Bar, 4-pieces 1/4"-20 x 1-3/8" 5-3/8"
RPCR9120 T-Bar, 4-pieces 1/4"-20 x 1-3/8" 4-1/4"
RPCR1006 Chrome Steel Oil Filter Cover
Chrome Steel Mini Tab Protect oil filters and dress up the engine
RPCR9067 compartment! Chrome-plated steel fits over
the existing filter and secures in place with
1-1/2" wide. Comes with 8 pieces.
included set screw.
Part No. Description
RPCR1070 Oil Filter Cover 4-9/32”H x 3-11/16” dia.
RPCR1067 Oil Filter Cover 5-3/16”H x 3-11/16” dia.
Small Block Chevy
Steel Oil Pans Engine Dipsticks
Part No. Description Dipstick and tube included. Black or chrome finish
RPCR9005P
1965-79, Orange, 283-350 available.
(4 Qts., Driver Side Dipstick)
1980-85, Black, 283-350
RPCR9092P 4 Qts., (Passenger Side RPCR9005P
Dipstick), 2-Pc. Rear Seal Part No. Description
1986-Up, Unplated, 283-350 Small Block Chevy
RPCR9414RAW (4 Qts., Passenger Side RPCR4957 1955-79, 283-350, Block Mount, Chrome Steel, 19" Long
Dipstick), 1-Pc. Rear Seal RPCR4957BK 1955-79, 283-350, Block Mount, Black Steel, 19" Long
RPCS4957BK 1955-79, 283-350, Black Steel, 19" Long
RPCR9420 1980-82, 305-350, Chrome Steel, 23" Long
Big Block Chevy
Ford Steel Oil Pans RPCR4958 1965-90, 396, 427, 454, Block Mount, Chrome Steel, 23" Long
Part No. Description RPCR4958BK 1965-90, 396, 427, 454, Block Mount, Black Steel, 23" Long
1965-87, SB Ford,
RPCR9078
260-302, Chrome
1958-76, BB Ford, Flexible Transmission Dipsticks
RPCR9330RAW 352, 390, 406, 427, 428, Flexible dipsticks are available for bellhousing or 29" long
Unplated
RPCR9078 firewall mount. Aluminum handle, steel braided housing
RPCR9343P
1968-73, BB Ford, has a PTFE dipstick that’s a push-in style with an O-ring
429-460, Blue seal. Bracket on handle mounts to either bell housing or
1968-73, BB Ford,
RPCR9343Z firewall.
429-460, Zinc Plated
Part No. Description
Bellhousing Mount
RPCR5004 GM TH-350
RPCR5005 GM TH-400
RPCR5006 GM 700-R4
Firewall Mount
RPCR5101 Ford C-6
RPCR5104 GM TH-350/TH-400
RPCR5106 GM 700-R4

2023 - 2024 HOT ROD AND EARLY MUSCLE 431

Transmission Oil Pans Stainless Steel Black Radiator Hose Kits
RPC transmission oil pans are made of with Black End Caps
stamped steel or cast aluminum. Chrome- Each kit includes one stainless steel
plated steel pans are available plain or finned. Finned hose— 1-3/4" O.D. (length varies), two
aluminum pans are highly polished. All include magnetic black aluminum end cap covers, two
oil drain plug. rubber hose sleeve adapters— 1-3/4"
Part No. Description I.D., four rubber reducers - two 1-1/4"
RPCR9074 Turbo 350 Chrome-Plated Steel, Plain I.D. and two 1-1/2" I.D. and four hose
RPCR9122 Turbo 350 Chrome-Plated Steel, Finned
clamps.
RPCR7589 Turbo 350 Polished Aluminum, Finned
RPCR8492 Turbo 400 Polished Aluminum, Finned Part No. Description
RPCR9121 Turbo 400 Chrome-Plated Steel, Finned RPCR7301BK 12" Hose Length, Black End Caps
RPCR7588 Turbo 400 Polished Aluminum, Finned RPCR7304BK 24" Hose Length, Black End Caps
RPCR8493 Turbo 700R4/4L60E Polished Aluminum, Finned RPCR7307BK 36" Hose Length, Black End Caps
RPCR7599 Turbo 700R4/4L60E Chrome-Plated Steel, Finned RPCR7310BK* 48" Hose Length, Black End Caps
RPCR7591 GM PowerGlide, Polished Aluminum, Finned * 48" kit has double quantities of end caps, sleeve adapters, reducers and clamps.
RPCR7590 Chrysler 727, Polished Aluminum, Finned
Stainless Steel Heater
TH-350 Aluminum Transmission Pan Hose Kits
RPCR8491 Each kit includes two
Polished aluminum transmission pan stainless steel hoses (3/4"
includes gasket and bolts. O.D. x 44"L), four aluminum end cap
covers (chrome or polished), four rubber hose
Aluminum Hose End Caps sleeve adapters - 3/4" I.D., four rubber reducers - 5/8" I.D.,
and eight hose clamps.
Part No. Description
RPCR7318 Polished Radiator Hose Cap, 2 Pieces Part No. Description
Chrome Radiator Hose Cap, 2 Pieces RPCR7313 Polished Kit
RPCR7319 RPCR7314 Chrome Kit
(Fits over 1-3/4" Hose Sleeve Adapter)

Rubber Hose Sleeve Adapters Braided Hose Sleeve

Part No. Description Kit
Radiator Hose Adapter Kit Includes Protect hoses and provide
RPCR7317 1-3/4" Sleeve Adapters, 1-1/4" and a high-performance look.
1-1/2" Reducers and Two Clamps
Kit includes 3 ft. of vacuum
Radiator Hose Adapter Kit Includes 2"
RPCR7315 Sleeve Adapters, 1-1/2" Reducers
line sleeve with 1/4” clamps,
and Two Clamps 4 ft. of fuel line sleeve with
RPCR7315 5/8” clamps, 12 ft. of heater
hose sleeve with 3/4”
Stainless Steel Radiator Hose Kits clamps, and 4 ft. of upper radiator hose sleeve with 1-1/2”
Each kit includes one stainless steel hose— 1-3/4" O.D. clamps. Available in chrome or red finish.
(length varies), two aluminum end cap covers stained or
polished, two rubber hose sleeve adapters— 1-3/4" I.D., Description Chrome Red
Hose Sleeve Kit RPCR6678 RPCR6676
four rubber reducers —two 1-1/4" I.D. and two 1-1/2" I.D.,
and four hose clamps.
Part No.
RPCR7303
Description
24" Hose Length, without End Caps
Slim Vertical Coolant
RPCR6072
RPCR7304 24" Hose Length, Polished End Caps Recovery Tank
RPCR7305 24" Hose Length, Chrome End Caps Compact vertical coolant recovery tanks are
RPCR7307 36" Hose Length, Polished End Caps available in stainless steel or aluminum and are
RPCR7308 36" Hose Length, Chrome End Caps RPCR7303
designed to fit in tight spaces. Twist-on cap and
RPCR7310* 48" Hose Length, Polished End Caps
mounting hardware included.
RPCR7311* 48" Hose Length, Chrome End Caps
* 48" kits have double quantities of end caps, sleeve adapters, reducers, and clamps. Size Capacity Stainless Aluminum
2" x 13" 1.25 Pint RPCR6072X RPCR6072
2" x 15" 1.50 Pint RPCR6073X RPCR6073
2" x 17" 1.75 Pint RPCR6074X —
3" x 10" 2.25 Pint RPCR6076X RPCR6076

Radiator Fluid Reservoir Tank

RPCR6570
Tank is chrome aluminum 3" x 9", 1.50 pint
(24-oz.) capacity.

432 2023 - 2024 HOT ROD AND EARLY MUSCLE

Polished Aluminum Water Necks Aluminum Pulleys for Long Water
Part No. Description Pump
Small Block and Big Block Chevy
RPCR6002 Straight Up, O-Ring Style, (O-Rings, Bolts Included) Part No. Diameter Groove Bolt Circle Finish
RPCR6003 45° Swivel, O-Ring Style (O-Rings, Bolts Included) Water Pump Pulleys for 1969-85 Engines
RPCR6009 90° Swivel (O-Rings, Bolts Included) RPCR9482 6.6" Single 2.30" Satin
RPCR6015 15° Swivel, 1966-75 283-350, (O-Rings, Bolts Included) RPCR9483 6.6" Double 2.30" Satin
LS-Series Engines Crankshaft Pulleys for 1969-85 Engines
RPCR6212 Straight Up, O-Ring Style, (O-Rings, Bolts Included) RPCR9484 6.6" Single 2.30" Satin
RPCR6213 45° Swivel, O-Ring Style (O-Rings, Bolts Included) RPCR9485 6.6" Double 2.30" Satin
RPCR9486 6.6" Triple 2.30" Satin

Chrome Steel Water Necks Single- and Double-Groove

Part No. Description
Small Block and Big Block Chevy Aluminum Pulleys for Big Block
RPCR9228 1955-64, (O-Rings, Bolts Included) Chevy Short Water Pump
RPCR9647 Straight Up, (O-Rings, Bolts Included) Fits big block Chevy engines.
Small Block Ford
1965-75 260, 289, 302, 351W, Bypass Bolt
RPCR9440 Part No. Diameter Groove Finish
Circle
Provision (O-Rings, Bolts Included) RPCR9647 Water Pump Pulley for 1965-68 Engines
RPCR9415 429-460 (O-Rings, Bolts Included)
RPCR8840 6.6" Single 1.75" Satin
RPCR8842 6.6" Double 1.75" Satin
Gilmer Drive Pulley Sets Crankshaft Pulley for 1965-68 Engines
CNC-machined billet aluminum pulley set includes a 1.5” RPCR8841 6.6" Single 2.30" Satin
belt, crank, water pump, and alternator pulleys. Available RPCR8843 6.6" Double 2.30" Satin
for small or big block Chevy engines, or Ford small block
283/302 and big block 460 engines. Chrome Power Steering Pulley
Part No. Description RPCR8948
Small Block Chevy Pulley fits early GM thru 1984. With keyway
RPCR8710 Short Water Pump
and 5/8" diameter shafts.
RPCR8711 Long Water Pump

Small Block Chevy Pulleys Polished Aluminum

Chrome Pulleys for Short Alternator Pulley Fan
Water Pump RPCR8867
Part No. Diameter Groove Bolt Circle
Fits GM and Ford. Will not fit trucks.
Water Pump Pulleys
for 1955-68 Engines
RPCR9600 7.1" Single 1.75" Sanden Style A/C Compressors
RPCR9601 6.4" Double 1.75"
Crankshaft Pulleys
Sanden 508 12-volt air conditioning
for 1955-68 Engines compressors are available with
RPCR9602 6.8" Single 1.75" either serpentine or V-belt pulleys, in
RPCR9603 7.3" Double 1.75" polished aluminum, chrome-plated,
or black anodized finishes. Sanden
Chrome Pulleys for Long Water Pump 7176(SD7) 12-volt serpentine drive models are available in
satin or black anodized finish.
Part No. Diameter Groove Bolt Circle
Water Pump Pulleys Description Type Polished Chrome Satin Black
For 1969-85 Engines Sanden 508
Serpentine RPCR8751 — — RPCR8751BK
RPCR9604 6.3" Single 2.30" 12v
RPCR9605 6.3" Double 2.30" Sanden 508
Serpentine — RPCR8752 — —
Crankshaft Pulleys 12v
For 1969-85 Engines Sanden 508
V-Belt — — — RPCR8753BK
RPCR9606 6.9" Single 2.30" 12v
RPCR9607 6.9" Double 2.30" Sanden 7176
Serpentine — — RPCR8755 RPCR8755BK
(SD7) 12v
RPCR9608 7.8" Triple 2.30"

Small Block Chevy Pulleys GM Power Steering Pump

Aluminum Pulleys for Short Water Pump Brackets Long Water Pump
Part No. Diameter Groove Bolt Circle Finish
Part No. Description Finish
Water Pump Pulleys for 1955-68 Engines
RPCR3830 Small Block Chevy Chrome
RPCR9479 6.6" Double 1.75" Satin
RPCR3831 Small Block Chevy Black
Crankshaft Pulleys for 1955-68 Engines
RPCR3832 Big Block Chevy Chrome
RPCR9480 6.6" Single 1.75" Satin
RPCR3833 Big Block Chevy Black
RPCR9481 6.6" Single 1.75" Satin

2023 - 2024 HOT ROD AND EARLY MUSCLE 433

GM Power Steering Pump Brackets Driver's 14" Muscle Car Style Round Air Cleaner Kits
Side—Short Water Pump
Part No. Description Finish
RPCR3814 Small Block Chevy Chrome
RPCR3815 Small Block Chevy Black
RPCR3816 Big Block Chevy Chrome
RPCR3817 Big Block Chevy Black

14" black powder-coated finish or chrome steel top with

Power Steering Pumps steel base, they fit single 4bbl. carburetors with 5-1/8"
A-can type GM Saginaw pump set up for neck. Includes steel mounting stud with wing nut and
bolt-on pulley. Fits early and late GM cars paper filter element.
and trucks.
Part No. Description
Part No. Description Chrome Steel Top w/Steel Base
RPCR3913 Chrome RPCR2195
Fits a Single 4bbl Carb
RPCR3913X Zinc Black Powder-Coated Finish, Stamped Steel Top
RPCR2195BK-BOX
RPCR3914 Power Steering Accessory Hose Kit w/Recessed Base Fits a Single 4bbl Carb

Polished Aluminum Hilborn Style Scoop 14" Finned Round

RPCR5233 Air Cleaner Kits
Aluminum dual-quad Finned and polished, the base fits
Hilborn- style scoop is highly polished, carburetors with a 5-1/8” neck.
has an adjustable mounting plate to fit Available with 3" paper elements.
most dual-quad setups and includes air Includes polished steel mounting
filters and hardware. Fits carburetor with stud.
5-1/8" diameter necks. Part No. Description
RPCR6720 With 3" Paper Element, Recessed Base
12" Finned Oval Air Cleaner Kits RPCR6722 With 3" Paper Element, Flat Base

Finned top is polished and base accepts paper or

washable elements. Air cleaners fit all 14" Polished Aluminum
5-1/8" carburetor flanges and polished Round Air Cleaner Kits
steel mounting stud is included. 14" X 3" air cleaner kits with paper
Part No. Description elements. Includes polished steel
RPCR6320 12" x 2" Tall with Paper Element mounting stud. Fits carburetors with
RPCR6321 12" x 2" Tall with Washable Element 5-1/8" diameter necks.
Part No. Description
12" Polished Aluminum RPCR6801 Ball Milled, Polished, 3" Tall Paper Element, Recessed Base
Oval Air Cleaner Kits RPCR6802
RPCR6902
Ball Milled, Polished, 3" Tall Paper Element, Flat Base
Plain, Polished, 3" Tall Paper Element, Flat Base
Aluminum top with polished aluminum
base, kits fit single-quad carburetors
with 5-1/8" neck. Includes polished 14" Louvered Style
steel mounting stud. Air Cleaner Kits
Part No. Description RPCR4195
RPCR6020 Ball Milled, Polished, 2" Tall Paper Element Includes polished steel mounting stud
RPCR6020-1 Plain, Polished, 2" Tall Paper Element
with wing nut and 3" tall paper element.
Fits carburetors with 5-1/8” neck.
14” x 3" Super Flow Air Cleaner Kits
All-in-one kits combines a Super
Flow top plate, 14" x 3" pre-oiled
washable element, chrome plated
Chrome Steel Triangular
steel base, and necessary hardware. Air Cleaner Kit
Choose from kits with red or blue RPCR7148
elements, and recessed or flat base. 14" x 3" triangular air cleaner with
RPCR2029X
Part No. Description recessed base and paper element.
RPCR2029X
14" x 3" Air Cleaner Kit, Red Element with Chrome Lip, Includes steel mounting stud with
Recessed Base wing nut. Fits all carburetors with
14" x 3" Air Cleaner Kit, Blue Element with Chrome Lip,
RPCR2225 5-1/8" neck.
Recessed Base
14" x 3" Air Cleaner Kit, Blue Element with Chrome Lip,
RPCR2226
Flat Base
14" x 3" Air Cleaner Kit, Blue Element with Black Lip,
RPCR2227
Recessed Base
14" x 3" Air Cleaner Kit, Red Element with Black Lip,
RPCR2350
Recessed Base

434 2023 - 2024 HOT ROD AND EARLY MUSCLE

Cadillac/Oldsmobile Retro Style Chrome Alternator Bracket
Air Cleaner Kits RPCR7758
These retro-style air 1955-69 small block Chevy 283-350
cleaner kits designed low-mount bracket (left side).
to fit 5-1/8" neck
4bbl. carburetors are Plastic Carburetor Cover
available in either black or chrome-plated finish. Each kit
contains filter element, steel stud, and wing nut. RPCR2012
Cover fits 5-1/8” neck for Holley 2- and
Part No. Description
RPCR2194 Black Finish
4-barrel carbs.
RPCR2194C Chrome Plated
Chrome Universal Dual
14" x 3" Performance Style Round Air Throttle Return Spring Kit
Cleaner Kits RPCR6052
RPCR2351
Designed to Chrome Steel Carb Mount Throttle
fit single 4bbl Return Kit
carburetors with a
5-1/8" neck, this kit
RPCR2083
features a black powder-coated finish steel and recessed Fits Holley 2300/2305 2bbl
base. Includes steel mounting stud with wing nut and red carburetors and 4150/4160
washable filter element. 4bbl carburetors Includes
both heavy and light spring
sets.
GM Power Steering Pump Flow
Chevy
Control Valve
Chrome Distributor Clamp
RPCR3157
Natural steel flow control valve for GM-
RPCR4116
style power steering pumps flows up to Clamp fits Chevy V8 1963-up factory
2 gpm. style.

Fuel Filters
Not for use with fuel injection.
Part No. Description
RPCR9245 Clear/Chrome Fuel Filter, 3/8" Inlet And Outlet
SBC Accessory Bracket Kits RPCR9247 Clear/Chrome Fuel Filter, 5/16" Inlet And Outlet
Black anodized aluminum bracket
kits are designed for small block Small Block Chevy
Chevy engines with long water pumps. Timing Cover Kit
Fasteners included.
RPCR6040
Polished aluminum cover
Part No. Description
is complete with gaskets,
Power Steering Pump Bracket Kit, Block Mount,
RPCR4302BK
Driver's Side seal and fasteners. Will
RPCR4304BK Alternator Bracket Kit, Mid-Mount, Passenger Side not clear double-roller
timing chains. Fits 283-
350.

Aluminum Timing Tab

RPCR6041
Fits small block Chevy 283-350 with
6" or 7" balancer.

Chrome Timing Chain Cover

RPCR4934
Chrome-plated steel timing cover fits
small block Chevy 283-350. Will not clear
double-roller timing chains. Includes
cover, seal, gaskets, and bolts.

2023 - 2024 HOT ROD AND EARLY MUSCLE 435

Two-Piece Chrome Polished Aluminum Pedals
Timing Chain Cover
RPCR7122
Chrome-plated steel timing cover fits SB Chevy 283-350.
Will not clear double-roller timing chains. Includes cover,
seal, gaskets, and bolts. Allows changing cam without oil
pan removal.

Chrome Timing Tab RPCR8500POL RPCR8600POL RPCR8601X RPCR8504 RPCR9507X

RPCR4960 Part No. Description

Rectangular Brake Pad with Rubber Insert
Fits SB Chevy 283-350 and chrome 6", 7", RPCR8500POL
(Automatic Transmission)
or 8" balancer. Gas Pedal with Rubber Insert, Chrome Aluminum,
RPCR8504
Floor-Mount-Style
Aluminum Optima™ RPCR9507X Gas Pedal with Rubber Insert, Firewall-Mount-Style
Gas Pedal with Rubber Insert and Steel Arm
Battery Trays RPCR8600POL
(Automatic Transmission)
Lightweight, attractive battery Gas Pedal with Rubber Insert and Aluminum Arm
RPCR8601X
trays are designed specifically (Manual Transmission)
to mount Optima size 34/78
batteries. Available with ball-
milled, chrome ball-milled, and Turn Signal
polished smooth finishes.
Chrome
RPCR31-581
Ball-Milled Ball-Milled Polished Smooth Small turn signal with amber lens and
Description Part No. Part No. Part No.
Group 34/78 RPCR6323 RPCR6323C RPCR6326 single filament bulb. Chrome plated.

Aluminum Optima™
Black Battery Trays Chrome License Plate
These lightweight aluminum Frames
trays are designed specifically RPCR6071
to fit Optima™ group size 34/78 Chrome-plated aluminum license plate frame.
batteries.
Part No. Description
RPCR6323BK Ball-Milled Black
Blue Dot Taillight Insert
RPCR6326BK Smooth Black RPCR9472
Requires a 15/16" hole drilled in taillight lens
Stainless Steel for installation. One to a package.
Battery Tray
RPCR9323
Includes tray and hold-downs. Safety Wire Pliers and Safety Wire
Size is 7-1/2" x 13-1/4". Safety wire
pliers allow
you to grip,
cut, and twist
Stainless Steel safety wire
Kickdown Cable easily. Steel safety wire is available in 350 ft. rolls (sold
Assemblies separately).
Kickdown cable assemblies for small Part No. Description
block Chevy have durable, braided RPCR809 9" Safety Wire Pliers
RPCR811 350-ft. Roll of Safety Wire
stainless steel housings.
Part No. Description
RPCR6051 SB Chevy, Carburetor, 700-R4 Transmission Street Rod Wiper Motor
RPCR6053 SB Chevy, Carburetor, TH-350 Transmission RPCR6558
12-volt stainless housing has 110°
Stainless Steel Throttle Cable Assemblies of arm swing, metal gearing, and
Throttle cables with braided stainless auto park, for use with 11” arm and
steel housings fit carbureted 10” blade. Single speed.
systems and 1986-93 Ford EFI. Part No. Description
Part No. Description Replacement Component
RPCR6054 24" Housing Length RPCR6057 Replacement Wiper Blade, Middle Insert Style
RPCR6054X 36" Housing Length

436 2023 - 2024 HOT ROD AND EARLY MUSCLE

"California Classic" Adjustable Electric Fan
Door Mirrors Controller Kit
RPCR6607 RPCR3106
Hardware and various "wedges" to properly position For use with fans up to 20
mirrors included. amps, this 12-volt controller
allows adjustment from
Chrome Peep Mirrors 160°F up to 220°F. Includes
controller, wire, connectors, mounting bracket,
with Short Arm and stainless steel thermostat sensor.
RPCR6610
Chrome 4" peep mirrors have a short arm and Electric Fan Mounting
fit driver or passenger side. Kits
Swan Neck Mirrors RPCR1019
Mounting kit includes zip-
RPCR6615 tie mounts and retainers
Four-inch retro “Swan Neck” needed to install a
mirrors have a chrome- standard RPC electric fan.
plated stem with a polished
stainless steel head. Mirror Electric Fan Control
uses two stud mounting.
Sold per pair. Relay Kit
RPCR3103
5" Oval Interior Mirror Universal fan control relay activates
at 185°F and switches off at 165°F.
RPCR6616 Includes harness and temperature
Screw-on style chrome steel mirror. sensor with 1/2" NPT threads.

Universal Fit Aluminum

Universal Electric
Radiators
Cooling Fan Lightweight single-pass
Available in chrome or aluminum radiators are
black finish, these 12-volt designed to provide
reversible fans feature improved cooling in high-
curved and black straight- performance applications.
blade versions and are TIG-welded and furnace-
offered in 10”, 12”, 14”, or brazed radiators are available in overall widths from 23”
16” sizes. Mounting hardware to 31”, feature a 1.5” driver-side inlet and 1.75” passenger-
included. side outlet, and feature a passenger-side billet filler neck.
Blade
Finish Type 10" 12" 14" 16" Tank Core Core Core Filler
Part No. Width Thickness Width Height Thickness Location
Chrome Curved RPCR1201 RPCR1203 RPCR1205 RPCR1207
RPCR1020 23" 3" 17.75" 19" 2.25" Right
Black Curved RPCR1009 RPCR1012 RPCR1014 RPCR1016
RPCR1024 31" 3" 25.75" 19" 2.25" Right
Black Straight - RPCR1202 - RPCR1206

Electric Fan Early Ford Aluminum

Thermostat Switch Kits Radiators with
For use with 12-volt systems,
thermostat kits are available Transmission Cooler
for either 200°F on/185°F off or Clear anodized aluminum radiator
185°F on/170°F off applications. with built-in mounts is 16.5”W x
Includes circuit breaker. Relay 2.25”D. It is available for ’32 High-
with harness sold separately. Boy applications with a 22” core
Part No. Circuit Breaker On/Off
height, 1.5” center inlet, and 1.75”
RPCR3101 50 amp 200°/185° passenger-side outlet.
RPCR3102 30 amp 185°/170° Inlet Outlet
Accessory Core Core Size and Size and
Part No. Style Width Depth Height Location Location
Part No. Type Type
1.5"
RPCR1018 20A/30A Relay w/Harness RPCR1032 '32 High-Boy 16.5" 2.25" 22" 1.75" Right
Center

2023 - 2024 HOT ROD AND EARLY MUSCLE 437

Proportioning Valve Steering Wheels
Residual pressure valve provides Steering wheels feature matching
even brake feel and provides proper horn button and horn wire, and
fluid transfer. Non-adjustable valve is designed for use on fit most 6-hole steering adapters
disc/drum brake applications. (steering wheel adapter not
Part No. Material Style Adjustable included). Wood grip steering wheels
RPCR4500 Brass Disc/Drum No feature a polished mahogany grip
with special heat-resistant urethane
finish for lasting beauty. Sold each. RPCR5860

GM-Style Brake Boosters Part No.

RPCR5311
Description
14" Aluminum Steering Wheel with Leather Wrap
Compact-design, dual-diaphragm boosters RPCR5313 14" Aluminum Steering Wheel with Wood Grip
fit on firewall or under floor. Available in 7” or RPCR5314 14" Aluminum Steering Wheel with Wood Grip
8” sizes with 3.75” x 3.75” bolt pattern with 3/4” 14" 3-Spoke Steering Wheel with 1-1/2" Dish.
RPCR5868
studs. Chrome- or zinc-plated finish. Chromed Steel with Wood Grip.
15" 3-Spoke Steering Wheel with 1-1/2" Dish.
Part No. Style Material Finish RPCR5872
Brushed Stainless with Wood Grip.
RPCR3907 7" Dual Steel Chrome
RPCR3907X 7" Dual Steel Zinc
RPCR3908 8" Dual Steel Chrome
RPCR3908X 8" Dual Steel Zinc Differential Covers
Chrome-plated steel differential covers
without plugs are available for 12-bolt
and 10-bolt GM applications.
Part No. Pattern Style
Stainless Steel Overflow Tanks RPCR4787 12 Bolt GM Intermediate Differential Cover
Stainless steel overflow tanks have a RPCR4786 10 Bolt
1964-72 Intermediate- 1967-72 Camaro K,G,C,
compact footprint and feature 1/4" hose and B Axles
barb inlet and outlet connections. Mounting
hardware included. Available in polished or Radiator Caps
black powder-coated finish. Chromed aluminum cap has a knurled grip
and is rated for 16 psi.
Part No. Description Pressure
Part No. Description RPCR5010 Polished Aluminum 16 lbs.
Coolant Recovery Tank, 17" H x 2" Dia., 28-oz. Capacity. RPCR5011 Chrome Aluminum 16 lbs.
RPCR6074BK
Black Powder-Coated Finish.
Coolant Recovery Tank, 19" H x 2" Dia.,
RPCR6075BK
Black Powder-Coated Finish.
Coolant Recovery Tank, 16" H x 3" Dia., 28-oz. Capacity.
RPCR6078BK
Black Powder-Coated Finish.
Coolant Recovery Tank, 10" H x 2" Dia.,
RPCR6081BK
Black Powder-Coated Finish.
Coolant Recovery Tank, 10" H x 2" Dia.,
RPCR6081X
Polished Finish.

7" Trailer Ramps with Flap Cut-Out

RMPRR-TR-7-FLP
Flap, cut-out ramps are
Trailer Ramps designed for enclosed
Lightweight and durable, trailer doors with an extension flap up to 16" long.
specially designed Trailer Ramps reduce approach angle up to 5.2°, support up
Ramps allow loading low- to 6,000 pounds, and accommodate up to a 12" wide
slung race cars into trailers without damaging noses, etc. tire. Lightweight ramps include built-in straps to ease
Just place the trailer door on the recess at the leading transport and storage. Sold in pairs.
edge of the ramps to decrease the angle of approach by
as much as 4° and load car. Sold in pairs. Trak-Jax
Part No. Description Trak-Jax get low-slung cars high
RMPRR-TR-4 46"L x 4"H x 14"W, 5.5° Incline enough to fit a standard floor
RMPRR-TR-5 67"L x 5"H x 14"W, 4° Incline jack under the car. They weigh
RMPRR-TR-6 45"L x 6"H x 14"W, 7.8° Incline just 5 pounds each. Sold in pairs,
RMPRR-TR-7 74"L x 7"H x 14"W, 5.2° Incline Trak-Jax are 30.1"L x 3"H x 12"W.
RMPRR-TR-8 54.75"L x 8"H x 16"W, 8.4° Incline
Part No. Description
RMPRR-TR-9-FLP 95"L x 14"W x 8"H 5.5° Incline
RMPRR-TJ Trak-Jax
RMPRR-TJ-S Trak-Jax, with 1.5" Stop

438 2023 - 2024 HOT ROD AND EARLY MUSCLE

Trailer-Mate 67" Race
RMPRR-TM-FRT Ramp XTs
Eases tie down of low ground Ramps are
clearance race cars to trailer by adding 3" of ground ideal for low-
clearance. Typically used to allow car door to clear trailer ground-clearance
wheel wells. Sold in pairs, Trailer-Mates have a 10.79° vehicles with up to 12"
incline. wide tires. Ramps hold up to
3,000 lbs. per set and have a 10.75° incline. 67"L x 10"H x
Flatstoppers 14"W. Two-piece ramp sets allow front side of ramps to be
removed, allowing easier inder car access. Sold in pairs.
RMPRR-FS
Part No. Description
Helps keep tires from flat spotting during RMPRR-XT 1-Piece Set
long periods of storage. Flatstoppers won’t conduct heat RMPRR-XT-2 2-Piece Set
or cold to tires despite floor temperature changes and
won’t damage floor. Sold as four-piece set, 22.3"L x 3.5"H 56" Race Ramps
x 14"W.
Ramps are ideal for
low-ground-clearance
10" Flatstoppers vehicles with up to 10"
RMPRR-FS-10 wide tires and lift car up
Prevents tire flat spotting when to 8". Ramps hold up to 3,000 lbs. per set and have a 10.75°
vehicle is stored for an extended time. Lightweight incline. 56"L x 8"H x 12"W. Two-piece ramp sets allow
construction, non-slip and won’t damage floor. Fits tires front side of ramps to be removed, allowing easier under
up to 8" wide and up to 28" in diameter. Set of four. car access. Sold in pairs.
Part No. Description
RMPRR-56 1-Piece Set
Supercar RMPRR-56-2 2-Piece Set
FlatStoppers®
RMPRR-FS-16-SC 40" Sport Ramps
Designed to RMPRR-40
accommodate tires up to 14" wide and 30" diameter these Sport Ramps are for small
FlatStoppers® will preserve tire shape when storing a sports cars that don’t have 12"
vehicle for thirty days or more. Once the tires are set wide tires or low front ends,
in FlatStoppers® on a level surface, they settle into the but still can benefit from other
pad’s concave depression, which evenly disperses the Race Ramp features. Ramps
weight of the car across the tires and prevents flat spots. have 16° incline and accommodate up to 8" wide tires and
Sold in sets of four. Made in USA. raise car up to 7", while holding 3,000 lbs per set. 40"L x
7"H x 10"W. Sold in pairs.
67" XT Race Ramps
RMPRR-XT-2-HD Roll-Ups
Gives an additional 2" of RMPRR-RU
lift and width. With a total weight capacity of 10,000 Designed to be
pounds and 10.8° incline, they work exceptionally well used with 56" or 67"
for Corvettes and other low-to-the-ground sports cars Race Ramps or 40"
with up to 12" wide tires. Constructed with a high-density Sport Ramps. They
expanded polystyrene that is coated with a hybrid raise the opposite
polyuria, these ramps are extremely lightweight, yet end of vehicle up 4" for oil changes or even allow use of a
strong and durable. Two-piece design, sold in pairs. Made standard floor jack. Small enough to fit in the trunk of a
in USA. C5 or C6. 32.75"L x 4"H x 14"W with 10.79° incline. Sold in
pairs.

Xtenders
Attaches to 56" or
67" Race Ramps,
giving an approach angle of only 6.8° for low-ground-
clearance vehicles. Sold in pairs
Part No. Description
RMPRR-EX-12 56", 45"L x 12"W
RMPRR-EX-14 67", 45"L x 14"W

2023 - 2024 HOT ROD AND EARLY MUSCLE 439

Wheel Cribs Show Rocks
Wheel Cribs are a safe, lightweight RMPRR-ROCK-6-FS
alternative to jack stands. Each This 6" high fieldstone gray
Crib supports 1,500 pounds and textured imitation rock is
accommodate 12" wide tires. Available extremely lightweight, weighing only
in 8", 10", or 12" high versions. Cribs allow car to be level 25 pounds, yet able to support 2500 pounds The rock is
for oil changes or while displaying. Sold in pairs strong, durable and will not scratch or damage any floor
Part No. Description surface. Made in USA.
RMPRR-WC-8 15"L x 8"H x 12"W
RMPRR-WC-10 15"L x 10"H x 12"W
RMPRR-WC-12 15.75"L x 12"H x 12"W Rally Ramp
RMPRR-30
24" Trailer Step Ideal for displaying cars
RMPRR-TR-SP-24 and smaller sport cars with
Can be used as a free-standing short noses. Also great for
step with non-slip coating on all quick oil changes and trackside work. 30"L x 10"H with a
sides. Includes strap for easy 16° angle of approach. Fits tires up to 8" wide. Set of two.
carrying and also fits in the step
well of the trailer. 24"L x 11"H x
16"W. Sold individually. Pro-Stop Parking Guide
Made from recycled semi tires,
Racer Chock these wheel stops grip to the floor on
even the smoothest of surfaces. With pre-drilled holes
RMPRR-RC-5 on the front they can be permanently mounted to the
Lightweight construction, tire- garage or trailer floor. Sold individually or as a set of two
contoured surface. Sold each. 10"L x 12"W x 5"H. or four. Made in USA.
Part No. Description
Wheel Chocks RMPRR-PS-2 Pro-Stop Parking Guide, 2-Pack
RMPRR-PS-4 Pro-Stop Parking Guide, 4-Pack
RMPRR-WC-2
100% recycled rubber. Non-slip, for
use on all types of floors. One size fits
all. Sold as a pair.

440 2023 - 2024 HOT ROD AND EARLY MUSCLE

HDX and Powergrip Clutch Sets True Balance
Ram HDX clutch sets RAM88760HDX
Billet Flywheels
feature increased Ram flywheels are ready to bolt in
clamp loads and a high- right out of the box. Each unit is CNC
performance street machined, surface ground parallel
organic disc. Discs are to the crank flange, and precision
built with the exclusive balanced.
eight-spring hub and poly
Make Ring Gear Balance Steel Aluminum
coil springs for excellent
Chevrolet
strength and durability. Small And Big Block 168-Tooth Internal RAM1501 RAM2501
HDX sets provide the Small Block 400 168-Tooth External RAM1523 —
smoothest engagement Small And Big Block 153-Tooth Internal RAM1511 —
for street driven cars. For Small Block '86-Up 168-Tooth External RAM1530 —
performance street/strip cars, Powergrip sets include Big Block 454 168-Tooth External RAM1521 —
the same increased clampload pressure plates with a Big Block 502 168-Tooth External RAM1532 —
900/300 series friction material for a balance between Big Block 572 168-Tooth Internal RAM1501 RAM2501
driveability and holding power up to 550 horsepower at Small Block LS1 168-Tooth Internal RAM1550 —
the wheels. Ford
Small Block 164-Tooth 28 oz./in. RAM1505 —
Make Size Spline HDX Powergrip
Small Block 164-Tooth Internal RAM1507 —
GM
Small Block 5.0L 157-Tooth 50 oz./in. — RAM2525
Early GM Cars Diaphragm 10.5" x 1-1/8" 10 RAM88760HDX RAM98760
Small Block 157-Tooth 28 oz./in. RAM1527 RAM2527
Early GM Cars Diaphragm 11.0" x 1-1/8" 10 RAM88762HDX —
Small Block 4.6L 8-Bolt 164-Tooth Internal RAM1545 —
Early GM Cars Diaphragm 10.5" x 1-1/8" 26 RAM88761HDX —
Big Block 184-Tooth Internal RAM1519 —
Early GM Cars Diaphragm 11.0" x 1-1/8" 26 RAM88764HDX RAM98764
Chrysler
GM LS 1997-10 11.0" x 1-1/8" 26 RAM88931HDX RAM98931
6-Bolt Crank 130-Tooth Internal RAM1503 —
Ford
8-Bolt Crank 130-Tooth Internal RAM1583 —
Early Ford
10.5" x 1-1/16" 10 RAM88502HDX RAM98502 8-Bolt Crank 143-Tooth Internal RAM1593 —
Lever Style
Early Ford
Lever Style
11.0" x 1-1/16" 10 RAM88769HDX RAM98769
Hydraulic System
Ford Mustang 5.0L 1986-93 10.5" x 1-1/16" 10 RAM88794HD RAM98794
Adjuster
Chrysler
All 10.5"
10.5" x 1" 23 RAM88766HDX —
RAM78300
Lever Style Allows adjusting clutch
All 11.0" pedal position in virtually
11.0" x 1-3/16" 18 RAM88504HDX —
Lever Style Hemi
any vehicle using an internal
hydraulic slave cylinder.
Street Hydraulic Release Bearings Unit plumbs inline with the feed line from the slave
For applications where the standard cylinder and is compatible with all factory or aftermarket
release mechanism may not fit. Bearings hydraulic clutch-release bearings.
feature .700" travel, and work with up to
a 3/4" master cylinder. T56 kits include
all hardware to adapt to the OEM master
GM LS Complete
cylinder. Clutch
Part No. Application Packages
RAM78125 GM For Muncie, Saginaw, T-10, 1.375" Collar A complete
RAM78130 Ford T-5, 1.435" Collar clutch package
RAM78132 Ford Tremec, 1.435" Collar engineered
RAM78160 GM - Ford T56
exclusively for
street-driven GM
Concept 10.5 LS applications
Clutches capable of
Modular, dual-disc withstanding up to
Concept 10.5" clutches 500 horsepower.
utilize a poly-coil Offering high
sprung hub top disc that clamping load
provides dampening with excellent pedal feel, package includes billet steel
upon engagement, easing pedal effort, while eliminating flywheel, heavy-duty 12" pressure plate, and helix center
harsh starts and transmission fatigue. Precision- hub organic clutch disc.
machined billet modular stands eliminate distortion, Part No. Application
resulting in a stable clutch mounting platform. Clutches RAM25-831 GM LS, 6-Bolt Crank, 168-Tooth
listed below feature an organic design, will fit most flat
flywheels and require no adjustments.
Part No. Application
Chevy
RAM50-2125 Chevy, 168T-Tooth, 1-1/8"-26 Spline
RAM50-2127 Chevy, 153-Tooth, 1-1/8"-26 Spline

2023 - 2024 HOT ROD AND EARLY MUSCLE 441

Ring and Pinion Installation Components Pinion Setting Tool RAT10003
Ratech offers a complete line of differential service Quickly install aftermarket gear sets with checking
parts. Whether installing a new set of gears or making a distance marked on the pinion head.
repair, Ratech has just what is needed. Part No. Description
RAT10003 GM 7.5"/7.625" 10-Bolt
Installation Kits RAT10004 GM 8.5" 10-Bolt
RAT10005 GM 8.875" 12-Bolt, Except Trucks
Basic Kit: Pinion shims, crush sleeve, RAT10006 Ford 8.8"
pinion seal, cover gasket
Installation Kit: Pinion shims, carrier Solid Pinion Bearing Spacers
shims, crush sleeve, pinion seal, pinion Reusable spacers replace the stock crush
nut, ring gear bolts, cover gasket sleeve and eliminate pinion bearing failure.
Bearing Kit: Pinion and carrier bearings Available with or without shim kits.
Complete Kit: All small parts and bearings to com­plete a Pinion Bearing Spacer Pinion Bearing Spacer
ring and pinion installation. Description Only and Shim Pack
Chrysler 8.75" (Late) — RAT4103
Basic Installation Bearing Complete Ford 8.8" and 9" RAT4104 RAT4105
Housing Inst. Kit Kit Kit Kit
Ford 9", 35-Spline — RAT4113
GM 7.5" (1980-96) RAT408K RAT108K — RAT308TK
GM 12-Bolt Auto — RAT4101
GM 7.5" (1977-81) RAT408K RAT108K RAT208B RAT308K
GM 10-Bolt 8.5" RAT4109 —
GM 8.2" (1964-71) — RAT119K RAT208B —
GM 8.5" 10-Bolt Passenger — RAT110K RAT204B RAT310K
GM 8.875" 12-Bolt Passenger RAT415K RAT115K RAT205B RAT315K Ford 9" Pinion Pilot Bearing
Corvette (1963-79) — — RAT205B — Pinion pilot bearing fits all Ford 9".
Ford 9" Open 2.891" Carrier
RAT406K RAT106K — RAT306K Part No. Description
Bearings LM 102949
RAT9015 Pinion Pilot Bearing
Ford 9" Open 3.062" Carrier
RAT406K RAT106K — — RAT9015-A Pinion Pilot Bearing Retainer
Bearings LM 603049
Ford 9" Open 2.891" Carrier
Bearings LM 501349
RAT406K RAT106K — —
Ford 9" Reusable
Ford 9" 3.250" Carrier Bearings
Ford 8.8" Auto
RAT406K
—
RAT106K
RAT105K
—
RAT205B
—
RAT305K
Differential Housing Gasket
Ford 8" — — — RAT334K RAT5107R
Chrysler 8.75" Casting #489 — — — RAT302K Reusable gasket fits all
Dana 60 RAT424K RAT124K — RAT324K common Ford 9" housings.

Individual Component Parts

Whether it's carrier bearings or just a pinion nut, Ratech components will complete the rear
end overhaul.
Carrier
Pinion Carrier Crush Sleeve/ Pinion Pinion Ring Gear Cover Head Tail Bearing
Housing Shims Shims SmartSleeve Seal Nut Bolt Gasket Bearing Bearing Set
Chrysler
8.75" Early Style Casting #742 — — RAT1107 RAT6103 RAT1500 RAT1304 RAT5101 RAT7006 RAT7007 —
8.75" Late Style Casting #489 RAT1102 — RAT3102 RAT6102 RAT1500 RAT1304 RAT5101 RAT7008 RAT8003 RAT9004
Dana 60 RAT1110 RAT1106 RAT1118 RAT6117 RAT1505 RAT1309 RAT5116 RAT7001 RAT8006 RAT9008
Ford
7.5" RAT1100 — RAT3104 RAT6105 RAT1502 — RAT5122 — RAT8003 RAT9001
8.8" — — RAT3101 RAT6121 RAT1502 RAT1302 — RAT8001 RAT8001 RAT9021
Ford 9"
Trac Lock 1957-84 RAT2100 — RAT3104 RAT6110 RAT1502 RAT1305 RAT5107 See Below See Below See Below
Trac Lock 1985-90 RAT2100 — RAT3104 RAT6105 RAT1502 RAT1305 RAT5102* " " "
Open 1957-84 RAT2100 — RAT3104 RAT6110 RAT1502 RAT1302 RAT5107 " " "
Open 1985-90 RAT2100 — RAT3104 RAT6105 RAT1502 RAT1305 RAT5102* " " "
2.891" Carrier Bearing LM102949-Common — — — — — — — RAT8003 RAT8003 RAT9011
2.891" Carrier Bearing LM501349-Thicker Stack — — — — — — — RAT8003 RAT8003 RAT9021
3.062" Carrier Bearing LM603049 — — — — — — — RAT8003 RAT8003 RAT9012
3.250" Carrier Bearing — — — — — — — RAT8003 RAT8003 RAT9010
Daytona Pinion — — — — — — — RAT7007 RAT8003 —
Daytona Pinion with Pro Gear — — — — — — — — RAT8003 —
Standard Diameter (28-Spline) Pinion RATHM804846 RAT2790
— — — — — — — —
(Pinion Supports Strange/Mark Williams/Moser) RATHM804810† RAT2729†
Large Diameter (35-Spline) Pinion RATHM804846 RAT2788
— — — — RAT1509 — — —
(Pinion Supports Strange/Mark Williams/Moser) RATHM804810† RAT2729†
GM
8.2" 1964-72 OEM Gear Set (2.440" Crush Sleeve) RAT1104 RAT1105 RAT3106 RAT6107 RAT1503 RAT1301 RAT5106 RAT7004 RAT8001 RAT9002
8.2" 1964-72 Aftermarket Set (2.440" Crush Sleeve) RAT1104 RAT1105 RAT3107 RAT6107 RAT1503 RAT1301 RAT5106 RAT7004 RAT8001 RAT9002
8.5" Auto RAT1100 RAT1105 RAT3109 RAT6108 RAT1501 RAT1303 RAT5106 RAT7005 RAT8003 RAT9002
8.875" 12-Bolt Auto RAT1100 RAT1101 RAT3111 RAT6109 RAT1503 RAT1306 RAT5104 RAT7005 RAT8003 RAT9001
Camaro 2010-Up (218mm) RAT1100 RAT1101 — — — RAT1303 — — — —
* O-Ring. † Bearing race (cup) part number only.

442 2023 - 2024 HOT ROD AND EARLY MUSCLE

Motor Oils ShockProof Gear Oils
The most stable synthetic components give the highest Available in Heavy, Lightweight, and Super
degree of protection and cleanliness with the lowest Light viscosities. Heavy gear oil resists
friction. Red Line Oils provide superior wear protection throw-off and prevents tooth breakage.
and friction reduction over a wide temperature range for Ideal for high temp and extreme pressure
excellent performance in hot running engines. in differentials and manual transmissions.
Case of (12) Lightweight gear oil is excellent in low
1-qt. Bottle 1-qt. Bottles temps and may be used to obtain maximum
Description Part No. Part No.
power transfer in racing differentials.
OW-20 RED11804 RED11824
OW-30 RED11114 RED11144
Super Light oil has the viscosity of
OW-40 RED11104 RED11124 automatic transmission fluid. Ideal when
5W-20 RED15204 RED15224 maximum power output is required.
5W-30 RED15304 RED15324 Case of (12)
5W-40 RED15404 RED15424 1-qt. Bottle 1-qt. Bottles 5-Gallon
10W-30 RED11304 RED11324 Description Part No. Part No. Part No.
Heavy Gear Oil RED58204 RED58224 RED58206
10W-40 RED11404 RED11424
Lightweight Gear Oil RED58404 RED58424 —
10W-60 —­ RED11724
Super Light Gear Oil RED58504 RED58524 —
15W-50 RED11504 RED11524
20W-50 RED12504 RED12524

WaterWetter®
Can reduce water temperatures as Gear Oils
much as 30°F. Add to new or used Formulated for limited slip differentials
an­ti­freeze to improve the heat and manual transaxles. Additional
transfer of ethylene and propylene limited slip additives are not required.
glycol systems. De­signed for The 75W90 is recommended for street
modern alu­mi­num, cast iron, brass, or racing differentials, while 80W140 is
and bronze radiators. 12-oz. bottle. recommended for heavily loaded or low-
speed differentials. one-quart container.
Case of (12)
12-oz. Bottle 12-oz. Bottles 1 Qt. Bottle (12) 1 Qt. Bottles
Description
Part No. Part No. Part No. Part No.
RED80204 RED80224 75W-90 RED57904 RED57924
75W-140 RED57914 RED57934
80W-140 RED58104 RED58124
SuperCool™ Pre-Mixed
Performance Coolant
Convenient pre-mixed coolant High-Performance Synthetic
for automotive and motorsports
applications—pour and go! Blended Brake Fluid
with purified, deionized water and the Redline high-performance synthetic
optimal WaterWetter percentage. brake fluid is designed to handle the heat
Reduces rust, corrosion, and of track days, providing solid pedal feel
electrolysis, cleans and lubricates and providing immediate response. Both
water pump seals. Compatible with all antifreeze and formulas are DOT 4 rated, with RL600
coolant. Also available as undiluted concentrate. offering a minimum dry boiling point of
Case of (4)
594°F, and RL700 having a dry boiling point
1/2 Gallon 1/2 Gallon 1-Gallon Case of (4) of 626°F. Sold in 16.9-oz bottles or cases.
Jugs Jugs Jugs 1-Gallon Jugs
Case of (6)
Pre-Mix RED80205 RED80225 RED81215 RED81255 16.9-oz. 16.9-oz.
Concentrate — — RED81205 — Bottles Bottles
RL600 Street/Track Brake Fluid RED90404 RED90414
RL700 Racing Brake Fluid RED90405 RED90415

2023 - 2024 HOT ROD AND EARLY MUSCLE 443

Limited Slip Friction Power Steering Fluid
ModifIer/Break-in Additive Red Line’s power steering fluid
Additive will significantly reduce friction provides improved wear protection
as well as break-in temperatures in and resists thermal breakdown. Fully
differentials by as much as 50°F. For use in synthetic fluid also resists evaporation
all differentials, conventional or limited-slip, and foaming at high temperatures.
and compatible with petroleum or synthetic Suitable in most power steering units.
gear oils. One-quart bottles.
Case of (12) Case of (12)
4-oz. Bottle 4-oz. Bottles 1-qt Bottle 1-qt Bottles
Part No. Part No. Part No. Part No.
RED80301 RED80331 RED30404 RED30424

MT-90 and MTL CV-2 Synthetic Grease

CV-2 grease has a very high melting point,
Manual Transmission Lubricant excellent water washout resistance, and
Use in manual transmissions and transaxles superior anti-wear characteristics. Lubricant
for excellent protection of gears and contains an organic moly and is great for
synchronizers and a superior coefficient of wheel bearings, high-angle and conventional
friction. MTL is a 75W80 GL-4 gear oil that CV-joints, chassis lubrication and high temp
is similar in viscosity to SAE 5W30/10W30 industrial equipment, 14-oz. cartridge.
engine oil. MT-90 is a 75W90 GL-4 gear oil.
Case of (12)
One-quart bottles. 14-oz. Cartridge 14-oz. Cartridges
Part No.
Case of (12) Part No.
1-qt. Bottle 1 -qt. Bottles RED80402 RED80421
Description Part No. Part No.
MTL (75W-80) RED50204 RED50224
MT-90 (75W-90) RED50304 RED50324
GL-4 (75W-85) RED50504 RED50524
Engine Break-In Additive
Add anti-wear components zinc and
phosphorus (ZDDP) for protection of camshaft
Racing, Synthetic and and valvetrain during initial break-in. Break-in
is especially critical in flat-tappet engines with
High-Temp Automatic larger camshafts and high spring pressures.
Transmission Lubricants Piston rings will also seat properly. 16-oz.
Racing ATF is a synthetic fluid for bottle.
automatic transmissions that require Case of (12)
the positive shift that Type-F fluid 16-oz. Bottle 16-oz. Bottles
Part No. Part No.
provides. Synthetic ATF is a Dexron RED81403 RED81423
II/Mercon fluid that meets the
requirements of most manufacturers.
High-Temp is a synthetic ATF where
Dexron II/Mercon is recommended and
Liquid Assembly Lube
is specifically formulated for effective Prevents metal to metal contact and wear
operation at 70°F and above. One-quart bottles. before adequate lube is supplied. Will not plug
filters after initial startup and provides three
Case of (12)
1-qt. Bottle 1-qt. Bottles times more protection than conventional
Description Part No. Part No. molybdenum disulfide greases.
Synthetic ATF RED30504 RED30524
Case of (12)
High-Temp ATF RED30204 RED30224 12 Oz. Bottle 12-oz. Bottles
Racing ATF RED30304 RED30324 Part No. Part No.
Lightweight ATF RED30314 RED30315 RED80319 RED80329

Assembly Lube
Assembly lube has three times
greater film strength than
conventional molybdenum
disulfide greases. May be used on
camshafts, lifters, piston skirts,
main and rod bearings, etc.
4-oz. Lube 16-oz. Lube
Part No. Part No.
RED80312 RED80313

444 2023 - 2024 HOT ROD AND EARLY MUSCLE

1970-81 GM F-Body Control Arms Brake Rotors
Stamped steel control arms with The fully machined hats of
press-in lower ball joints, bolt-in upper these factory replacement
ball joints, bushings, and hardware. brake rotors are treated
Part Description with a black E-coat that
REKRK100-21 Upper, Lower, Complete Set is designed to pass a 400-hour salt spray test without
REKRK100-21L Lower Set rusting. The friction surface has a non-directional double
REKRK100-21U Upper Set disc ground finish and are mill balanced to achieve the
REKRK100-20
Delrin Control Arm Bushing best possible braking characteristics. Sold in pairs.
Set
Part Description
REKRK400-06 Front, 1965-82 GM F-Body/Corvette
1967-81 GM F-Body 2" REKRK400-07 Rear, 1965-82 GM F-Body/Corvette
Drop Leaf Springs
REKRK200-02 1970-81 GM F-Body Rear JL8
This pair of multi-leaf springs is designed to lower the Disc Brake Caliper Upgrade Adapters
vehicle two inches. The stiffer than stock 175 lb./in. REKRK400-09
spring rate offers improved handling and less body roll. Upgrade the rear brakes with
4-piston REKUDO JL8 rear
1967-81 GM F-Body Rear Spring disc brakes. This premium
Shackle Kit rear brake system can be
used with the complete
REKRK200-08 REKUDO suspension
Reduce wheel hop and body roll with system for the GM 2nd Gen
a complete set of black polyurethane F-Body. Set of (2) rear cast
bushings with zinc-plated steel iron caliper adapters with
hardware and bolts. Synthetic grease hardware. Fits applications
included. with staggered rear shocks.
The adapters must be used with the following parts:
1970-81 GM F-Body RK400-16 rear dust shield; RK400-07 rear brake rotors;
1968-1982 Corvette C3 style 4-piston rear calipers, and
Front Lowering Springs one of the follow rear axles; GM 10-bolt 8.2", 10-bolt 8.5",
Improve handling and stance with or 12-bolt rear axle (all axles with staggered rear shocks).
a pair of front lowered coil springs.
Black powder coat.
Part Description
1970-81 GM F-Body
REKRK200-11 -1" Lower OE Replacement Front Sway Bar
REKRK200-12 -2" Lower
REKRK500-02
1-3/8" diameter
GM A/F-Body Adjustable Monotube Shocks carbon steel
Designed with firmer valving for a more performance- sway bar with
oriented ride, this high-pressure nitrogen-filled polyurethane
monotube shock can be adjusted while on the vehicle to greaseable frame
increase or decrease firmness. Bushings and hardware bushings and
included. Gray corrosion-resistant paint. Made in the replacement end
Netherlands. 24-month limited warranty. Sold each. links.
Part Description
GM F-Body
REKRK300-01 1967-69, Front
1970-81 GM F-Body
REKRK300-02 1967-69, Rear 1" Drop Spindles
REKRK300-03 1970-81, Front
REKRK300-04 1970-81, Rear
REKRK600-02
GM A-Body These Autocross-
REKRK300-05 1968-72, Front inspired spindles
REKRK300-06 1967-72, Rear retain the OE
appearance and
1965-82 Chevy Corvette JL8 Disc Brake Pads strength with
a taller than
REKRK400-08 stock forging for
Non-asbestos organic improved camber gain and lowers the front of the vehicle
brake pads. Fits front and by one inch. The spindles are forged 4140 chrome-moly
rear for 1965-82 Corvette. steel construction with black EDP coating. Sold in pairs.
One set per axle.

2023 - 2024 HOT ROD AND EARLY MUSCLE 445

1972-93 Dodge Truck 1500 JL8 Disc Brake Caliper
Lower Control Arms Upgrade Components
REKRK100-27 Part Description
Stamped steel lower control Brake Dust Shield
REKRK400-16 Rear
arms with press-in lower ball
REKRK400-17 Front
joints. Sold in pairs. REKRK400-24 Brake Caliper Bracket O-Ring, 1.82" Bore
REKRK400-25 Brake Caliper Bracket O-Ring, 1.32" Bore
2017-22 Tesla Model 3 Sway Bar Kit REKRK400-26 Bleeder Screws, 5/16"-24 Thread, Set of 4
REKRK400-27 Brake Bleeder Dust Cap, Rubber, Set of 4
REKRK500-04 REKRK400-28 Caliper Hardware, Clips/ Pins, Each
Designed to reduce REKRK400-29 Brake Caliper Piston, 1.82" Diameter, Each
body roll for improved REKRK400-30 Brake Caliper Piston, 1.32" Diameter, Each
handling and ideal for REKRK402-1
Front Brake Hose Kit, Flexible Brake Hose, Washers, Clips,
street driving, autocross, Set of 2
and track days. The kit Rear Brake Hose Kit, Flexible Brake Hose, Washers, Clips,
REKRK402-2
Set of 2
includes an adjustable
REKRK402-3 Rear Brake Hard Line Kit, Hard Brake Lines, Clamps, Clips
front 32mm tubular sway REKRK402-4 Front & Rear Disc Brake Hoses & Hardline Kit
bar, an adjustable rear Front Wheel Hub Assembly with Bearings, Seal, Cap, Nut,
22mm tubular rear sway bar, billet aluminum bushing REKRK600-01
Washer, Pin, Each
mounts, high-durometer polyurethane bushings, and
synthetic bushing lubricant.

2017-22 Tesla Model 3 1" Lowering Kit

REKRK200-10
Improve handling with a complete
set of front and rear 1-inch
lowering springs. Black
powder-coated finish.

H4 Non-Standard Plug – LED Sealed Beam Headlight

Pin-Out Swap Sold each.
RTBH820 Part
RTBLFRB100
Description
4" Tall x 6" Wide, Yellow Lens
RTBLFRB105 5-3/4" O.D., Yellow Lens
RTBLFRB110 5" Tall x 7" Wide, Yellow Lens
RTBLFRB115 7" O.D., Yellow Lens
RTBLFRB120 4" Tall x 6" Wide, Classic White Lens
LED Turn Signal Bulbs RTBLFRB125
RTBLFRB130
5-3/4" O.D., Classic White Lens
5" Tall x 7" Wide, Classic White Lens
Bulbs available in Classic White for a warm RTBLFRB135 7" O.D., Classic White Lens
classic hue (3000K), Modern White for a RTBLFRB140 4" Tall x 6" Wide, Modern White Lens
cleaner modern look (5700K), amber, and RTBLFRB145 5-3/4" O.D., Modern White Lens
red. Sold in pairs. RTBLFRB150 5" Tall x 7" Wide, Modern White Lens
Part Description RTBLFRB155 7" O.D., Modern White Lens
RTBHLED04 Modern White, 1156
RTBHLED05 Classic White, 1156 Aluminum Sealed Beam Headlight Housing
RTBHLED09 Modern White, 1157 Sold each.
RTBHLED10 Classic White, 1157
RTBHLED15 Amber, 1156 Part Description
RTBHLED20 Amber, 1157 RTBLFRB160 7" O.D.
RTBHLED25 Red, 1156 RTBLFRB165 4" Tall x 6" Wide
RTBHLED30 Red, 1157 RTBLFRB170 5" Tall x 7" Wide
RTBHLED34 Modern White, T10/194 RTBLFRB175 5-3/4" O.D.
RTBHLED35 Classic White, T10/194

446 2023 - 2024 HOT ROD AND EARLY MUSCLE

Exhaust Gaskets
Flexible graphite material gaskets deliver up to 50% crush and
withstand over 2,000°F, eliminating burn-out and the need to re-torque. Gaskets offer superior sealing, even on exhaust
header flanges that are warped or distorted. Weld Bead gaskets are offered for use with headers that use a weld bead to seal
the flange. Sold per pair.
Part No. Description Part No. Description
American Motors REM6002 361-440, 1957-80, 1-7/8" x 1-3/8" Square Port, Header/Manifold
REM1001 304-401, 1970-79, Header/Manifold Applications 440, Indy Cyl. Head, Square Port, 1-7/8" x 1-5/8", Header
REM6019
REM1002 290-390, 1966-69, Header/Manifold Applications Applications
304-401, 1970-79, Modified "Dog Leg" Port, Weld Bead 426 Hemi, 1964-71, 1-27/32" x 1-3/4" Square Port,
REM1003 REM6023
Header Applications Header/Manifold Applications
Buick Ford Modular
REM13-001 400-455, 1967-76, Square Port, Header/Manifold Applications 4.6L DOHC, 1993-04 Cobra/Mustang/Mach 1, Oval Port, Header
REM3019
REM13-006 364-425, 1957-66, "Nail Head", Header/Manifold Applications Applications
Small Block Chevrolet (Including Gen. III LS) 1991-04 Triton 4.6L SOHC; 1997-04 5.4L SOHC, 1-9/16” Round Port,
REM3022
REM2004 262-400, 1-9/16" Dia. Round Port, Header Only Header/Man. Applications
REM2005 262-400, 1-17/32" x 1-19/32" Square Port, Header Applications Only 1991-04 4.6L SOHC; 1997-04 5.4L SOHC, 1-1/2" Dia. Round Port,
REM3025
REM2006 262-400, 1-3/8" x 1-1/2" Stock Port, Header/Manifold Applications Header Only
262-400, Brodix Track 1, 1-1/2" 1-5/8" D-Port, 2005-Up 4.6L SOHC, 1-13/16" x 1-11/16" D-Shaped Port, Header/
REM2007 REM3027
Header Applications Only Manifold
4.8-6.0L Gen. III LS, LS1/LS6, 1-7/8" Round Port, Weld Bead REM3034 4.6L 4V, 1996-04, For Bassani Headers 46049C, 8-Piece Set
REM2008 5.0L, 2011-Up Coyote, 1-13/16" Round Port, Header Applications
Header REM3069
305-350 Vortec L31, 1-3/8" x 1-1/2" Square Port, Only
REM2011 Small Block Ford
Header Applications Only
262-400, Brodix Spread Port, Stahl 7-Bolt Pattern, Header 302-351W, 1-1/8" x 1-1/2" Square Port, Header/Manifold
REM2014 REM3003
Applications Applications
262-400, 1-5/16" x 1-3/8" Square Port, Weld Bead Header REM3004 289-302, 1-1/8" x 1-27/32" Oval Port, Header/Manifold Applications
REM2016 351C, 1970-74 2BBL, 1-1/2" x 2" Oval Port, Header/Manifold
Applications REM3006
REM2017 262-400, Oval Port, 1-9/16"W x 1-7/8"H, Header Applications Applications
REM2021 262-400, Oval Port, 1-1/2"W x 1-3/4"H, Header Applications 351C, 1970-74 4BBL, 1-15/16" x 2-5/32" Square Port, Header/
REM3007
262-350, LT1/LT4/ZZ4 Crate, 1-7/16" x 1-3/8" D-Shaped, Header Manifold
REM2022 289-351W, Aftermarket Heads, 1-1/4" x 1-5/8" Square Ports,
Only REM3028
REM2031 262-400, 1-7/16" Round Port, Weld Bead Header Applications Header/Man.
REM2032 262-400, 1-1/4" x 1-5/8" Oval Port, Weld Bead Header Applications 289-351W, Dart/Canfied/Pro Topline Cyl. Heads, 1-3/8” x 1-7/16” Sq.
REM3035
REM2040 262-400, Stahl/Hooker Adapter Flange Gasket, 7-Bolt Pattern Ports, Header Applications
REM2042 350, '92-96 LT-1, '96 LT-4, Header Applications 289-351W, Fits Cyl. Heads With 3" Bolt Spacing, AFR/Dart Heads,
REM3039
Header Applications
REM2043 262-400, 18° Cyl. Head, Stahl 7-Bolt Pattern, Header Applications
289-351W, Kook's Header Adapter Plate Gasket, 1-15/16" Round
262-400, 18° Cyl. Head, 1-5/8"W x 1-3/4"H, Square Port, REM3043
REM2044 Port, Header Applications
Header Applications
289-351W, Trick Flow Twisted Wedge, "R" Series, 1-3/4" Round
4.8/5.3/5.7/6.0/6.2L LS, 1-1/2" Dia., "Weld Bead" Header REM3066
REM2048 Port, Header Applications
Applications
Big Block Ford
REM2049 4.8-6.0L Gen. III LS, LS1/LS6, 1-3/4" Round Port
REM3009 332-428 “FE”, 1958-76, 1-9/32" x 2" Square Port, Weld Bead Header
6.2L LS9/7.0L LS7, 2006-13 Corvette, D-Port, 2"W x 1-3/4"H,
REM2066 429-460, 1968-95 Exc. CJ, 1-1/4" x 2-3/32" Oval Port, Header/
Header Applications REM3010
Manifold
262-400, AFR 23° Cyl. Head, Non-Spread Port, 1.465"H x 1.570"W,
REM2081 460, 1993-98, 1-5/8" x 1-29/32" D-Port, Header/Manifold
Header Applications REM3013
Applications
Big Block Chevrolet
332-427 "FE", 1958-65, 1-5/16" x 1-7/8" Square Port, Header/
REM2002 396-502, 1-7/8" Round Port, Header Applications Only REM3015
Manifold
396-502, 1-13/16" x 1-7/8" Square Ports, Header/Manifold
REM2003 460, 1988-98, 1-1/2" x 1-7/16" Square Port, Header/Manifold
Applications REM3018
Applications
396-502, Lg. Race Port, 2-5/32" Round Port, Headers Applications
REM2013 332-428 "FE", 1958-76, Square Port, 1-3/8" W. x 2-1/32" H., 16-Bolt
Only
REM3047 Pattern,
454-502, Mark IV/V/VI, 2" x 1-7/8" Irregular Stock Port,
REM2030 Header Applications
Header/Manifold
332-428 "FE", 1958-76, Square Port, 1-1/2" W. x 1-13/16" H., 16-Bolt
REM2035 396-502, D-Port, AFR Magnum, Header Applications REM3050
Pattern, Weld Bead Headers
REM2036 396-454, 1-3/4" Round Port, Weld Bead Header Applications
390 GT/GTA, Square Port, 1-3/16" W. x 1-13/16" H., 16-Bolt Pattern,
REM2047 396-502, Large Round Race Port, 2.40" Dia., Header Applications REM3051
Header Applications
454-496, 1996-09 Vortec, 1-7/8” x 1-15/16” Sq. Port, Honda
REM2058
Header/Man. Applications
2.0/2.4L DOHC, 2003-09, 2" x 1-3/4" Oval Port, Header
REM2068 396-454, 2” Round Port, Header Applications REM53-008
Applications,Single Gasket
Chrysler Late Hemi
Oldsmobile
5.7/6.1/6.4 Hemi, 2005-14, D-Shaped Port, 1-15/16" x 1-3/8",
REM6022 260-455, 1964-90, Separated Center Ports, Header Applications
Header Applications REM11-001
Only
Small Block Chrysler
Pontiac
318-360, 1968-92, 1-1/16" x 1-25/32" Square End Ports,
REM6003 REM12-001 326-455, 1958-79, Exc. Ram Air IV, SD And HO, Header/Manifold
Weld Bead Header
REM12-002 400-455, 1968-74 Ram Air IV, SD, HO, 1-7/8” Round Port
318-360, 1992-02 Magnum, 1-7/32" x 1-25/32" Sq. End Ports,
REM6004 326-455, 1958-79, Exc. Ram Air IV, SD And HO, Lg. "D"-Shaped
Header/Man. REM12-004
Center Port, Header Application
318-360, 1968-92, 1-3/16" x 1-27/32" Square End Ports,
REM6009 Toyota
Header/Manifold
2.4L, 1989-95 L4 22RE, 1-11/32" x 1-25/32" Egg-Shaped Port,
318-360, 1968-92, Edelbrock Performer RPM, 1-1/4" x 1-3/4" End REM7002
REM6027 Header Only
Ports, Header Applications
2.2/2.4L, 1975-90 L4 20R/22R, 1-9/16" Round Port, Header/
Big Block Chrysler REM7003
Manifold Application

2023 - 2024 HOT ROD AND EARLY MUSCLE 447

Turbo Gaskets
Manufactured from the same premium flexible graphite material as Remflex exhaust gaskets, turbo gaskets offer up to 50%
crush and can withstand over 2,000°F, eliminating burn-out and the need to re- torque. Sold
each.
Part No. Description
REM13-008 Buick 231 V6, 1986-87, 2-1/4" Turbo Up-Pipe Gasket, 3-Bolt Gasket
REM13-011 Buick 231 V6, 1986-87, Turbo-To-Down Pipe Gasket, 4-Bolt Gasket REM18-021
REM13-015 Buick 231 V6, 1986-87, Turbo-To-Down Pipe Gasket, Open Plenum, 4-Bolt Gasket
REM18-006 Garrett/Greddy T4, Turbo Inlet/Up-Pipe, Open Plenum, 4-Bolt Gasket
REM18-010 Tial 38mm Wastegate Gasket, 1-3/8" Outlet, 2-Bolt Gasket, Pair
REM18-021 Basic T-6 Inlet Gasket, Divided Plenum With (2) Ports, 4-Bolt Gasket
REM18-022 Basic T-4 Inlet Gasket, Open Plenum, 4-Bolt Gasket
REM18-023 Basic T-3 Inlet Gasket, Open Plenum, 1.83" W. x 2.35" H., 4-Bolt Gasket
REM18-024 Basic T-3 Inlet Gasket, Open Plenum, 1.75" W. x 2.25" H., 4-Bolt Gasket

Ring and Pinion Gear Sets Ford 8.8"

Chrysler 8.75" (Early) • Housing, 10 holes, 10-9/16" x
• Housing, 10 holes, "742" 10-13/16"
casting, 8-11/16" x 10-19/32" • 8.8" diameter ring gear
• 12-bolt carrier • 1.626" diameter pinion, 30-spline
• 8.75" diameter ring gear • 1985-93 Mustangs
• 1.75" diameter straight pinion, Installation Kit RIC83-1043-1
10-spline Part No. Ratio Teeth
• 1957-68 Chrysler, Plymouth, RIC49-0103-1 3.55 39-11
RIC49-0104-1 3.73 41-11
and Dodge passenger cars
RIC69-0310-1 4.10 41-10
Installation Kit RIC83-1037-1
Part No.
RIC69-0375-1
Ratio
3.91
Teeth
43-11
Ford 9"
RIC69-0045-1 4.10 41-10 •Oval housing, 10 holes
•10-bolt carrier
Chrysler 8.75" (Late) •9.00" diameter ring gear
•1.313" diameter pinion, 28-spline
• Housing, 10 holes, "489" casting,
•1965-73 Cougar, 1965-67
8-11/16" x 10-19/32"
Comet, 1957-73 Mercury, Ford,
• 12-bolt carrier
Thunderbird, 1962-73 Fairlane,
• 8.75" diameter ring gear
1965-73 Mustang
• 1.875" diameter tapered pinion,
Installation Kits RIC83-1011-1
10-spline
(2.891" Carrier Bearing) and
• 1969-73 Chrysler, Plymouth,
RIC83-1013-1 (3.062" Carrier Bearing)
and Dodge passenger cars
Installation Kit RIC83-1031-1 Part No. Ratio Teeth Part No. Ratio Teeth
RIC69-0195-1 3.55 39-11 RIC69-0161-1 4.33 39-9
Part No. Ratio Teeth RIC69-0361-1 3.70 37-10 RIC69-0185-1 4.56 41-9
RIC69-0371-1 3.55 39-11 RIC69-0179-1 4.11 37-9
RIC69-0058-1 3.91 43-11
RIC69-0059-1 4.10 41-10
GM 7.5" and 7.625"
Ford 8" •Housing, oval cover, 10 holes
•7.5" and 7.625" diameter ring gear
• Housing, 10 holes, 11"
•1.438" diameter pinion, 27-spline
• 8" diameter ring gear
•1982-92 Camaro, Firebird, 1977-87
• 1.188" diameter pinion, 25-spline
El Camino
• 1962-70 Falcon, 1965-79
Installation Kits, 1977-81
Mustang,1964-72 Comet, 1967- 72
and 1982-98 RIC83-1044-1
Cougar, 1960-72 Fairlane
Part No. Ratio Teeth
Part No. Ratio Teeth RIC49-0045-1† 3.42 41-12
RIC49-0101-1 3.55 39-11
RIC49-0046-1† 3.73 41-11
RIC49-0007-1* 3.73 41-11
RIC69-0322-1† 4.10 41-10
* Fits 3.08 and numerically lower carrier.
† Fits 3.23 and numerically higher carrier.

448 2023 - 2024 HOT ROD AND EARLY MUSCLE

GM 8.2" GM 8.875"
• Housing, (top) oval cover, 10 holes, • Housing, oval cover 10-7/8",
11", (bottom) irregular cover, 10 holes, 12 holes
10-5/8" • 8.875" diameter ring gear
• 10-bolts • 1.625" diameter pinion, 30-spline
• 8.20" diameter ring gear • 1965-72 Chevrolet/Chevelle/
• 1.438" diameter pinion, 25-spline Chevy II/El Camino, 1967-72
• 1965-70 Chevrolet, 1964-72 Chevelle, Camaro, 1970-72 GTO/Firebird/
1964-70 Chevy II, 1967-70 Camaro, Nova
1970-72 Nova Installation Kit: RIC83-1019-1
Installation Kit: RIC83-1022-1 Part No. Ratio Teeth Part No. Ratio Teeth
Part No. Ratio Teeth RIC49-0095-1‡ 3.55 39-11 RIC69-0304-1‡ 4.10 41-10
RIC49-0015-1 3.55 39-11 RIC49-0039-1‡ 3.73 41-11 RIC69-0031-1§ 4.10 41-10
RIC49-0112-1 3.73 41-11 RIC49-0096-1§ 3.73 41-11
RIC69-0159-1 4.11 37-9 ‡ Fits 3.07 to 3.73 ratio carrier.
§ Fits 3.90 ratio and numerically higher carrier.
GM 8.2" “B” or “P” Axle
• Housing, (top) oval cover, 10 holes, 11"
• (Bottom) irregular cover, 10 holes, 10- Installation Kits Include:
5/8" A Cover Gasket
• 10 bolts B Ring Gear Bolts and Washers
• 8.20" diameter ring gear, 27-spline C Crush Sleeve
• “B” or “P” axle only D Marking Compound and Brush
• 1964-71 Tempest/GTO, 1967-71 Firebird E Pinion and Carrier Bearings
Installation Kit: RIC83-1040-1 F Pinion Nut and Washer
G Pinion Seal
Part No. Ratio Teeth H Thread Locking Compound
RIC49-0082-1 3.55 39-11
I Silicone Sealer
Note: Use higher series carrier when replacing 2.56, 2.79, J Pinion and Carrier Shims
2.93, 3.08, and 3.23 ratios. Use 3.36+ carrier, 3/8" holes.

Gear Oils
GM 8.5" Richmond petroleum gear
• Housing, (top) oval cover, 10 holes, oils are designed to provide
11", (bottom) irregular cover, 10 maximum protection and
holes, 10-5/8" performance under the most
• 8.50" diameter ring gear demanding conditions. GL-4
• 1.626" diameter pinion, 30-spline multi-purpose petroleum gear
• 1970-76 Chevrolet, Chevelle, 1970- oil is formulated for use in
75 Chevy II, 1970-81 Camaro/ transaxles and transmissions
Firebird, 1972-81 Z-28, Trans Am, where specified. Will not
1973-76 El Camino harm brass, bronze, copper, and other soft metals used in
Installation Kit: RIC83-1021-1 synchronizers, bushings, and other components typically
found in classic manual transmissions and transaxles;
Part No. Ratio Teeth
RIC49-0017-1 3.08 40-13 contains no friction modifiers. GL-5 high-performance
RIC49-0019-1 3.23 42-13 petroleum gear oil is engineered for use in high-
RIC49-0278-1 3.42 41-12 performance racing differentials and posi-traction units.
RIC49-0041-1 3.73 41-11 Richmond gear oils are not compatible with synthetic oils
RIC69-0165-1 4.10 41-10 or additives.
Note: When replacing a stock 2.56 and numerically lower, the carrier must be replaced with a Part No. Description
carrier of 2.73 or higher. RICRICHGL4 GL4 80W90 Multi-Purpose Petroleum Gear Oil, One Quart
RICRICHGL5 GL5 80W90 High Performance Petroleum Gear Oil, One Quart
GM 8.5" “O” Axle
• Housing, irregular cover, 12 holes,
10-5/8" x 11", 10 bolts
• 8.5" diameter ring gear
• 1.626" diameter pinion, 27-spline
• “O” axle only
• 12-bolt cover, 10-bolt gear
• 1968-70 Cutlass, 4-4-2
Part No. Ratio Teeth
RIC49-0049-1 3.42 41-12

2023 - 2024 HOT ROD AND EARLY MUSCLE 449

Super T10 and Super T10 Plus 4-Speed Super Street 5-Speed
Transmissions with Overdrive
The original performance The Super Street 5-speed
transmission, born in provides the ultimate
the Muscle Car era of the blend of performance and
1960’s and upgraded to handle economy. Low gear ratios in
modern high-torque engines, the gears 1-4 ensure powerful
Richmond Super T10 and Super T10 Plus acceleration, while a high 5th
transmissions can handle up to 375 lb-ft. of torque, all in gear ratio yields a smooth
a lightweight 70-lb. (dry) package. and economical highway ride.
The robust side-lever rail-shift mechanism and four- Strong enough to handle up to
speed countershaft helical gears provide smooth, 600 lb-ft. of torque, it weighs
consistent shifts. The Super T10 Plus adds upgraded in at only 106 lbs. (dry). A durable
brass race synchro assemblies and a billet front bearing side-lever rail-shift mechanism
retainer for the shifting smoothness and strength and a lightened 1st gear result in
demanded by road racers. Both are available with easy, consistent shifts.
multiple gear ratio options. Part No. 1st 2nd 3rd 4th 5th Torque
Super T10 RIC7020526B 2.89 1.85 1.31 1.23 0.77 600 ft.lb.
Super T10 1st 2nd 3rd 4th Rev. Torque
Plus
RIC7021510 RIC1304000070 2.43 1.61 1.23 1.00 2.35 375 ft.lb.
RIC7021520 RIC1304000069 2.64 1.75 1.34 1.00 2.55 325 ft.lb.
— RIC1304000072 2.88 1.91 1.33 1.00 2.78 300 ft.lb.

Spark Plug Wire Looms

Custom billet plug wire looms attach to lower valve cover bolts and keep wires routed to
their proper terminations. Choose from several finishes, including: Polished (-P), Blue
Anodized (-B), Chrome Plated (-C), Gold Anodized (-G), Black Anodized (-K), Red Anodized
(-R), and Satin (-S). Add the proper suffix to the part number. Fits 7-9mm wires.
Part No. Description
Original Style
RMW1101 Small Block Chevy Except Centerbolt-Style Covers
RMW1120 Small Block Chevy With Center-Bolt Valve Covers
RMW1102 Big Block Chevy
RMW1103 Small Block Chrysler
RMW1104 Big Block Chrysler
RMW1108 Ford 429, 460
RMW1110 Pontiac
RMW1113 Olds, 1965-Up
Vertical Style
RMW1102-90 Big Block Chevy

450 2023 - 2024 HOT ROD AND EARLY MUSCLE

Hood Adjusters Stainless Door Striker Kits
Adjusters are machined from billet aluminum and Sold in pairs, the striker kits
will replace stock adjusters. Available in three include hardware and are a
finishes: natural, grey, and black, and two lengths. direct replacement for the
Sold in pairs. stock striker. GM strikers
Part No. Description are designed around 1967-81
RIB99000-5700B Black Adjusters, 7/8" Long Camaro.
RIB99000-5700N Natural Adjusters, 7/8" Long Part No. Description
RIB99000-5750N Natural Adjusters, 1-1/4" Long RIB50656-2150 1964.5-1966 Mustang
RIB92000-2191N 1967-81 Camaro, Natural Finish

Universal Hood Pin Kit

RIB99000-5501N GM Clutch Reservoir
Natural finished kit uses stainless RIB99000-4501B
steel ball lock pin for secure Machined from billet aluminum,
hood closure and easy-to- follow reservoir replaces the stock GM
instructions. plastic reservoir for hydraulic clutch.
Available in black finish: Includes
bracket and 5/16" nickel-plated hose
barb fitting. Accepts 1/8" NPT to AN
fitting. Black reservoir.

Billet Hood Hinge Kits

Elaborate fixtures, highly specialized machining processes, and years of experience have helped Ring Brothers engineer
these billet 6061-T6 aluminum hood hinge kits for popular muscle car applications. Available in two styles, solid and air frame
for steel or fiberglass hoods. Direct replacements for original factory hood hinges. Available in natural or black anodized
finish.
Part No. Type Hood Finish Part No. Type Hood Finish
1967-1969 Camaro 1968-72 Chevelle
RIB1031NS Solid Arm Steel Natural RIB1051NS Solid Arm Steel
RIB1032NS Air Frame Steel Natural RIB1052NS Air Frame Steel Natural
RIB1032BF Air Frame Fiberglass Black 1955-56 Chevy
RIB1032BS Air Frame Steel Black RIB1082BS Air Frame Steel Black
1970-81 Camaro 1965-66 Mustang
RIB1102NS Air Frame Steel Natural RIB1011NS Solid Arm Steel Natural
RIB1102NS Air Frame Fiberglass Natural
1965-67 Chevelle
RIB1031NS Solid Arm Steel Natural
RIB1032NS Air Frame Steel Natural

RIB1032NS RIB1051NS
Air Frame Solid

2023 - 2024 HOT ROD AND EARLY MUSCLE 451

StreetGrip Suspension System for Dual Rate StreetGrip Lowering Springs for
1963-82 Corvettes 1963-82 Corvette
ART11535010 ART11532350
From restorations to Dual rate (480/700) springs
restomod/pro-touring offer a softer rate for a more
cars, the Ridetech comfortable ride, transitioning
StreetGrip suspension to a stiffer rate for improved
system gives classic C2 cornering.CNC cold-wound
and C3 Corvettes greatly steel with a corrosion-resistant
improved handling and powder-coated finish.
ride quality. For the rear,
the kit includes lightweight composite leaf springs, Air Suspension Components for 1965-72 Ford
spring mounting blocks, and self-lubricating Delrin
bushings. The front suspension benefits from a heavy- Galaxie 500
duty larger diameter sway bar, dual-rate coil springs, Ridetech knows air suspension
and adjustable HQ Series monotube shocks. Kit includes components, and these air spring/
all necessary hardware as well as Delrin control arm shock kits for the 1965-72 Ford
bushings for use with stock control arms. Galaxie 500 are no exception.
Designed for bolt-in installation
and easy ride-height adjustability,
Complete Coil-Over Suspension System for they include rebound-adjustable
1963-68 Corvette monotube shocks and all needed
ART11520201 mounting hardware. Air compressor
Improve handling and system sold separately.
ride quality with bolt-on Part No. Description
ease. Complete coil-over Shockwave HQ Series Air Spring/Shock Kit with
ART12302401
Stud/T-Bar Mounting.
system includes front CoolRide HQ Series Rear Air Spring Kit with Air
and rear HQ series coil- ART12304010
Springs, Shocks, Spring Cups, and Hardware.
over monotube shocks
with springs, upper and HQ-Series Rear Coil-Over Systems for 1963-72
lower StrongArm tubular
A-arms, TruTurn steering Chevy C10
components, front Musclebar sway bar, bolt-on 4 Link ART11336510
rear trailing arm , and all necessary installation hardware. HQ (handling quality) coil-over systems
feature a monotube gas-pressure
Bolt-On 4-Link System design with a large 1.834" piston and
for Gen. II GM F-Body a 2-1/2" spring for outstanding ride
ART11177150 quality with fade-free performance.
The impact-forged aluminum body
Bolt-on
offers superior strength and has a
4-link
corrosion-resistant anodized finish
system
for long, reliable life. A 5/8" chrome
delivers a
shock shaft and double-sealed guide
lowered ride
rod with dust cover provide smooth
height and
movement and eliminate oil leakage, while the 1/2" bore
smooth,
and 1" Kevlar-lined bearings offer noise-free operation.
effective
RideTech StrongArms required for proper installation.
handling
to 1970-
81 Chevy Universal Coil-Overs
Camaro/Pontiac Firebird. Kit requires no welding or The ultimate in ride quality, handling, and
cutting and offers an easy installation. Complete system performance. Anodized, monotube gas shocks
includes link bars with rubber bushings, powder-coated offer fade-free performance, and double-sealed
brackets, and necessary hardware. rod guides with dust covers eliminate leakage.
Note: May be used with coil-over shock absorbers, if desired. Available as fixed valve or rebound single-
adjustable units, all are CNC-machined and
include 5/8" chrome shafts and 5/8" Kevlar-lined
Power Steering Box bearings. Two sets of inserts included to provide
Reinforcement Bracket 1/2" and 5/8" mounting. Inserts fit in 1-1/4" wide
for 1963-82 Corvette coil-over mounts. Sold individually. Springs are
not included.
ART11539535 Extended Compressed
This bolt-on bracket is designed to work with Part No. Description Length Length
Borgeson power steering boxes to eliminate ART24149901 Non-Adjustable Coil-Over 14.225" 10.125"
any flexing issues of the steering box. ART24149901 Adjustable Coil-Over 14.225" 10.125"
ART24159901 Adjustable Coil-Over 16.425" 11.25"

452 2023 - 2024 HOT ROD AND EARLY MUSCLE

HQ Series Shocks for Musclebar™ Front Sway Bar Kit
1963-72 Chevy C10 for 1988-98 GM C1500
HQ (handling quality) Monotube design with ART11379120
large piston, heavy-duty shaft, and impact Improve control
forged, hard anodized body provides and handling, and
superior damping and responsiveness. minimize body roll!
Rebound adjustable. Available for stock Easy-to-install
and lowered ride height. spherical end links
Part No. Description combined with
1963-1987 Chevy C10 2WD Front Coil Over System precision CNC-
ART22149841
HQ Series Stock Height
1963-1987 Chevy C10 2WD HQ Series Front Shock
bent 1.5” dia. tubing
ART22139841
Lowered Ride Height ensure proper fit.
Delrin-lined frame-
mount bushings
Tru Turn Steering Upgrade Package for 1967-69 provide smooth, consistent movement compared to
rubber and polyurethane. Exact bar rates are included
Camaro/Firebird, 1968-74 Nova with each bar, leaving nothing to guess.
ART11169525
The three major Coil-Over Suspension System for 1988-98 GM
components that C1500 2WD
comprise this kit
(steering arms, ART11370201
draglink bracket, and Improve handling and
tie rod assemblies) are ride quality with bolt-on
designed to upgrade ease. Complete coil-over
the poor geometry system includes front
design of the early and rear HQ series coil-
Camaro/Firebird and over monotube shocks
Nova vehicles. The results with springs, upper and
of these modifications are lower StrongArm tubular
outstanding. The redesigned A-arms, heavy-duty drop
steering arms correct bumpsteer and allow use of up to spindles, front sway bar,
10" wide wheels with 5-3/4" backspacing. The draglink rear wishbone, and all
bracket bolts onto the OEM draglink to relocate the inner necessary installation
tierod end to minimize bumpsteer. Finally the tie-rod hardware.
assemblies allow bolt-on installation of the redesigned
steering arms and draglink bracket. Must use Ridetech
spindles.

Universal Parallel Rear Aluminum Gas Filler

Suspension System Billet aluminum gas
filler/cap assemblies are
ART18988899 anodized (clear or black)
Four-link suspension is with locking caps (2
offered in parallel style. keys) and all installation
Similar in construction to the hardware. Direct fit
tri link with rubber bushings, on 1967-68 Camaro and 1962-67 Nova. Universal filler
heavy tubing, and laser assemblies may be easily adapted to custom installations
cut brackets, but with the addition of a Panhard bar to as well.
position the rear axle side-to-side. Components include
Part No. Description
a durable, powder-coated finish. Welding required for ART81000033 1967-68 Camaro Gas Filler, Black Anodized
installation.
Coolcap Universal Gas Filler
Universal Triangulated
ART84000000
Rear Suspension Universal gas filler/cap assembly is made of
System polished stainless steel and may be mounted
ART18987999 in bed floor or fender. Three-inch flange
diameter and an O-ring seals the cap.
The triangulated version
four-link is a tubular version of the tried and true that GM
has used since 1964. Highly adaptable to a wide variety
of custom applications. Components feature a durable,
powder-coated finish. Welding and basic fabrication
skills are required for installation.

2023 - 2024 HOT ROD AND EARLY MUSCLE 453

StrongArm™ Tubular Control Arms Wishbone Rear Suspension System
for 1988-98 GM C1500 for 1988-98 GM C1500
ART11371499
Bolt-on tubular control arms make
easy installation easy with included
ball joints and bushings. Designed to
provide proper camber adjustment
without a stack of shims, StrongArm
control arms are made of tough,
precision-bent tubular steel and black powder coated for
corrosion resistance. Lower control arms are available
for use with CoolRide air springs or HQ-series coil-over
shocks. Upper control arms can be used with either
application. Sold in pairs. Bolt-on wishbone rear suspension system replaces the
stock leaf springs for dramatically improved handling and
Part No. Description ride quality. System lowers the rear end while eliminating
ART11371499 Lower Control Arms for CoolRide Air Springs
binding and noise, and allows extremely tight wheel and
tire fitment. System includes lower bars, wishbone,
RidePro E5 Air Compressor Systems crossmembers, mounting brackets, and installation
hardware. Shocks not included. Available for 10-bolt or
14-bolt axles.
Part No. Description
ART11376510 Wishbone Suspension System for 14-Bolt Axle
ART11377199 Wishbone Suspension System for 10-Bolt Axle

2” Drop Spindles for 1988-98 GM C1500

ART11379300
Heavy-duty spindles
provide a 2” drop and
are designed for use
with stock HD (1.25”
thick rotors) brakes.
RidePro E5 air compressor systems are designed for easy
installation and setup. Offered with 3-gallon or 5-gallon R-Joint Rod Ends
aluminum tanks, the 12V compressor and digital 4-corner Constructed with an RTX10 composite cage
gauge and controller allow easy ride height adjustments and a spring-loaded closure, R-Joint rod
at the push of a button. System includes a full-color 3.5" ends offer low-friction movement and quiet
TFT display for easy control, or enjoy remote operation operation. With a full-range of articulation
with a smart phone using the RidePRO E5 app. 3-gallon in three planes, they have 360° axial rotation
systems are suitable for vehicles under 3,500 lbs., while and 30° of total lateral articulation. The self-
5-gallon systems are recommended for vehicles over cleaning design maintains smooth movement
3,500 lbs. Included sensors constantly manage pressure; and resists water, dirt and debris. Available in a variety of
add ride-height sensors for the ultimate in control! common sizes.
Offered in pre-wired, platform-mounted systems, or
Part No. Description
with individual components. ART90002771 R-Joint Rod End ¾”-16 RH x 5/8” I.D.
Part No. Description ART90002772 R-Joint Rod End ¾”-16 LH x 5/8” I.D.
Ride-Pro-HP Ride Height Sensor Upgrade Kit with ART90002773 Weld-On R-Joint, 5/8” I.D. x 1-3/4” Wide
ART30400036
4 Sensors, Linkage, and Wiring Harnesses. Each.
RidePro E5 Control System with 3.5" TFT Screen,
ART30518000
Control Module, Wiring Harness, and Hardware
RidePro E5 5-Gallon Air Compressor Kit, 1970-81 GM F-Body
ART30514100
Dual Compressors, 1/4" Valves, Platform Mounted
ART11170202
RidePro E5 5-Gallon Air Compressor Kit,
ART30514700
Dual Compressors, 3/8" Valves, Platform Mounted Improve handling and ride
RidePro E5 3-Gallon Air Compressor Kit, quality with bolt-on ease.
ART30534000
1/4" Valves Complete coil-over system
ART30534100
RidePro E5 5-Gallon Air Compressor Kit, includes front and rear HQ
Dual Compressors, 1/4" Valves series coil-over monotube
RidePro E5 5-Gallon Air Compressor Kit, shocks with springs, upper
ART30534700
Dual Compressors, 3/8" Valves
and lower StrongArm
tubular A-arms, TruTurn
steering components,
front Musclebar sway bar,
bolt-on 4 Link rear trailing
arm , and all necessary installation hardware.

454 2023 - 2024 HOT ROD AND EARLY MUSCLE

Front Suspension Components Suspension Upgrade Components
for 1967-81 GM F-Body for Chevy C10 Pick-Ups

High-performance control arms and sway bars improve

handling on the street and on the track. Ridetech
components feature a corrosion-resistant black
powder-coated finish and bolt-on installation.
Part No. Description
From StrongArm™ tubular control arms to Musclebar™ StrongArm Front Lower Tubular Control Arms for
ART11342199
sway bar kits, Ridetech offers a full range of proven 1963-70 GM C10/C15/C1500 Trucks/SUVs
suspension components to improve handling and ART11352199
StrongArm Front Lower Tubular Control Arms for
responsiveness. Featuring corrosion-resistant black 1971-91 GM C10/C15/C1500 Trucks/SUVs
powder-coated finishes and bolt-on installation, Ridetech
suspension components are designed for excellent Air Ride System Airline
performance, on or off the track.
1/4" Inflation Valve
Part No. Description
ART11162199
StrongArm Front Lower Tubular Control Arms for ART31957005
1967-69 GM F-Body/1968-74 GM X-Body
MuscleBar Front 1-1/8" Sway Bar for
ART11169120
1967-69 GM F-Body/1968-74 GM X-Body Air Line Cutter
ART11167300 Bolt-On Subframe Connectors ART90001081
StrongArm Front Lower Tubular Control Arms for
ART11172199
1970-81 GM F-Body
No more jagged cuts.
Delrin/Aluminum Subframe Bushing Set for
ART81001000
1967-81 GM F-Body
Airline Fittings
Suspension Upgrade Components for 1964-72 Description 1/4" Line Size 3/8" Line Size
GM A-Body 1/8" NPT Female Straight ART31952150 —
1/4" NPT Male Straight ART31954000 ART31956000
1/4" NPT Male Swivel Elbow ART31954201 ART31956201
Straight Splice ART31954300 —
Tee Fitting ART31954400 —

Ridetech offers high-performance components to

upgrade both front and rear suspension systems for
improved handling on both the street and the track.
Ridetech components feature a corrosion-resistant black
powder-coated finish and bolt-on installation.
Part No. Description
StrongArm Front Lower Tubular Control Arms
ART11222199
for 1964-72 GM A-Body
MuscleBar Front 1-3/8" Sway Bar for
ART11249120
1968-72 GM A-Body
Adjustable Tubular Trailing Arm Brace
ART11237299
for 1964-67 GM A-Body
Adjustable Tubular Trailing Arm Brace
ART11247299
for 1968-72 GM A-Body

2023 - 2024 HOT ROD AND EARLY MUSCLE 455

GM Front Disc Brake Conversion Kits 4-Wheel GM Stock Height Conversion Kits
Available in standard The kit includes
and Show 'N' Go 11" front rotors,
versions, complete forged spindles,
packages include: Timken bearings,
11" vented rotors, front calipers,
forged spindles, caliper brackets,
“loaded” calipers, dust caps, castle
brackets, bearings, seals, dust caps, backing plates, nuts & pins,
flex-hoses and clips, steering arm bolts, master cylinder washers, grease
combination valve, valve bracket, brake switch and seals, spindle
pigtail, and all hardware. The Show 'N' Go option adds gaskets, organic
11" zinc-plated, drilled and slotted rotors, black powder- pads, backing
coated calipers, and stainless steel brake hoses. plates, flex hoses
Part No. Description & clips, pedal
1967-69 Camaro/Firebird, 1968-74 Nova, rod extension,
RSDAFXWK02C
Stock Height Master banjo bolts & copper washers, steering arm bolts, master
RSDFSC55WKC
1955-64 Full-Size Chevy, Stock Height Master, cylinder, 9" brake booster, combination valve, valve
GM A/F/X-Body bracket/hardware, brake switch pigtail, 11" rear rotors,
1964-74 GM A/F/X-Body "At the Wheel" Kit w/ 10.5" rear calipers, rear bracket spacers, e-brake cables, and
RSDAFXWK14
Rotors, for Factory 14" Wheels
1964-72 A-Body Chevelle-El Camino,
weld-on hose brackets.
RSDAFXWK01CS
Show ’N Go Part No. Description
1967-69 Camaro/Firebird, with 11" Booster, 1964-72 Skylark, Chevelle, Eledorado, Malibu, Monte
RSDAFXDC02C RSDAFXDC41C
Stock Height Master Carlo, Cutlass, GTO, LeMans Non Standard Shocks
RSDAFXDC03C 1962-67 GM X-Body, with 9" Booster, Stock Height Master RSDFSC654DCC 1965-68 Chevrolet Bel Air, Biscayne, Impala
RSDAFXDC06C 1967-72 GM A-Body, with 11" Booster, Stock Height Master RSDAFXDC42C 1967 Chevrolet Camaro/Pontiac Firebird
1965-68 Chevy Full Size, with 9" Booster, Stock Height 1968-69 Chevrolet/Pontiac Firebird, 1968 Chevy II,
RSDFSC65DCC RSDAFXDC45C
Master 1969-74 Nova
1968-69 Chevrolet/Pontiac Firebird, 1968 Chevy II, 1969-
RSDAFXDC45CSX
74 Nova, w/ Chrome Master Cylinder and Black Calipers
1967-69 Camaro Front Mini Kits RSDFSC554DCC 1955-57 Chevrolet Bel Air/Impala
Mini kits consist of RSDFSC65WKD 1965-68 Chevrolet Bel Air/Impala
spindles, caliper
brackets, and backing GM Rear Disc Brake Conversion Kit
plates, and may be used
The kits
for restoration and for
include 11"
conversion of drum brake
rotors, new,
cars to single-disc GM
“loaded”
calipers.
calipers,
Part No. Description brackets,
RSDAFXMD 1967-69 Camaro, Standard Height Spindles spacers,
RSDAFXMD4 1967-69 Camaro, 2" Drop Spindles
backing plates,
hardware, flex
Mopar Front Disc Brake Conversion Kits hoses, weld-on hose brackets, and emergency brake
cables. Use with 15" and larger wheels.
Part No. Description
GM A/F/X-Body 10/12 Bolt, Non-Staggered Shocks,
RSDAFXRD01
with E-Brake
GM A/F/X-Body 10/12 Bolt, Non-Staggered Shocks,
RSDAFXRDM1
without E-Brake
RSDAFXRD05 GM A/F/X-Body 10/12, Staggered Shocks, with E-Brake
GM A/F/X-Body 10/12 Bolt,
RSDAFXRDM5
Staggered Shocks without E-Brake
1978-88 G-Body, 1982-92 F-Body,
The Mopar front conversion package, in non-power RSDAFXRD78
10 Bolt without Staggered Shocks
and power versions, includes 11" vented rotors (5 x 4.5"), RSDFSCRD01 1955-64 Full-Size Chevy, Non C-Clip 10/12 Bolt
standard forged spindles, New “loaded” single-piston RSDAFXDS01 1964-72 A-Body, with E-Brake
calipers with organic brake pads, caliper brackets, RSDAFXDS78
1978-88 G-Body, 1982-87 Camaro /Firebird 10 Bolt,
bearings, seals, dust caps, backing plates, flex-hoses 1990-92 Camaro/Firebird, and 1982-92 10 Bolt S10
and clips, steering arm bolts, and all hardware. The 1962-79 X-Body 1967 GM F-Body, 1965-73 GM A-Body,
RSDAFXRD01S
Non-Staggered Shocks, Black Calipers
power disc kit includes an 8" power brake master cylinder
1962-79 X-Body 1967 GM F-Body, 1965-73 GM A-Body,
assembly and an adjustable brake valve to complete the RSDAFXRD01Z
Non-Staggered Shocks, Black Calipers
system. Use with 15" and larger wheels. 1978-81 A-Body, 1982-92 F-Body, 1978-88 G-Body, With
RSDAFXRD78Z
Part No. Description E-Brake, Drilled/Slotted Rotors, Red Calipers
RSDMDC62WKC 1962-67 B/E Body, Disc Brake Conversion Kit 1982-92 F Body, 1978-88 G-Body. No E-Brake. 10/12 Bolt
RSDAFXRDM78
RSDMDC62DC 1962-67 B/E Body, Power Disc Brake Conversion Kit w/ Larger Ford Bearing.
RSDMDC62SD 1962-74 B/E Body, Disc Brake Conversion Kit

456 2023 - 2024 HOT ROD AND EARLY MUSCLE

Mopar Rear Disc Brake Conversion Kit Ford 9" Rear Disc
RSDMDCRD01 Brake Conversion
Fits Dana 60 and Kits
8-3/4" axle bearing The kits include 11-1/4"
flanges on most rotors, new loaded
1962-72 Mopars. calipers, brackets,
Kit includes 11-1/4" spacers, hardware, flex
rotors, new, “loaded” hoses, and weld-on hose
calipers, brackets, spacers, emergency brake cables, flex brackets.
hoses, weld-on brackets, and all hardware. Use with 15" Part No. Description
and larger wheels. RSDZDCRD01 Large Bearing without Staggered Shocks
RSDZDCRD02 Small Bearing without Staggered Shocks
GM Brake Line Kits RSDZDCRDM1 Large Bearing with Staggered Shocks, without E-Brake
Ford 9" Rear Disc Conversion Large Bearing w/ Staggered
Pre-bent RSDZDCDS05
Shocks, w/ 4-Lug Drilled Slotted Rotors
and flexible RSDZDCRD03 Ford 8.8" Rear Disc Conversion, Requires 5 Lug Axles
braided
brake lines 1968-69 Camaro
make restoring or upgrading the braking systems of older
vehicles faster and easier. Part numbers ending with "S" Brake Cable Set
indicate stainless steel. RSDRSBCF02
Part No. Description Set includes front,
Pre-Bent Hard Lines center, and two rear parking brake cables, olive green
RSDFIN7801
Power Disc Front to Rear Brake Line, Steel, center pull, two center to rear silver connectors, three
for 1977-81 GM F-Body parking brake black clips, 12-ft. silver hook, and two jam
Power Disc Front to Rear Brake Line,
RSDFIN7801S nuts.
Stainless Steel, for 1977-81 GM F-Body
Rear Axle Brake Line Kit for 1969 Camaro
RSDFRA6902
with Multi-Leaf Suspension, Steel New Dual
Master Cylinders
Master Cylinder Kit for 1964-72 GM A-Body 1-1/8" diameter new master
cylinder has a gray toned cast iron
RSDG0571 finish with two ports. The cover
Kit includes OEM style and cover bail wire are both zinc
master cylinder with a plated. Use DOT 3, 4, or 5 fluid.
1" bore and valving for
Part No. Description
front disc/rear drum RSDDBMC01 Disc/Drum, Single Bail, Dual Reservoir, Short Pocket
brakes. Bracket and RSDDBMC09 Disc/Drum, Dual Bail, Dual Reservoir, Deep Pocket
proportioning valve Disc/Drum, Dual Bail, Dual Reservoir, With Bleeders,
included. RSDDBMC11
Licensed GM Restoration Product

Chrome GM Brake New Chrome Slimline

Boosters/Master Dual Master Cylinders
Cylinder Combos New chrome dual master cylinder
Combos feature master boasts a slim line body with
cylinders with dual integral smooth rounded and reflective
reservoirs, and include edges. The oval shaped chrome
proportioning valves, cover is fastened with screws. Use
brackets, and installation DOT 3, 4, or 5 fluid.
hardware. Chrome finish. Part No. Description
RSDDBMC51C Disc/Drum, 1-1/8" Dia.,Deep Pockets
M.C.
Part No. Applications Dia. Diaphragm Bore RSDDBMC56C Disc/Disc, 1" Dia., Deep Pockets
RSDJ85315171 Universal 8" Single 1-1/8"
1967-72 GM Full-Size
RSDJ86810572 8" Single 1"
Truck/SUV - Disc/Disc
1967-72 GM Full-Size Proportioning/Distribution Valves
RSDJ86810971 8" Single 1-1/8"
Truck/SUV - Disc/Drum Part No. Description
RSDJ96810572 TBA TBA" Single TBA RSDPV01 Proportioning Valve, Adjustable
RSDJ96810971 TBA TBA" Single TBA RSDPV05 1967-69 Camaro, Distribution Block
* Includes low-rise booster bracket. RSDPV71 Proportioning Valve, 2-Wheel Disc Brakes
RSDPV71B Proportioning Valve, 2-Wheel Disc Brakes, Black
RSDPV72 Proportioning Valve, 4-Wheel Disc Brakes
RSDPV72B Proportioning Valve, 4-Wheel Disc Brakes, Black
RSDPV72C Proportioning Valve, 4-Wheel Disc Brakes, Chrome
RSDPVK71BLK Proportioning Valve Kit, 2-Wheel Disc Brakes, Black
RSDPVK72 Proportioning Valve Kit, 4-Wheel Disc Brakes
RSDPVK72BLK Proportioning Valve Kit, 4-Wheel Disc Brakes, Black

2023 - 2024 HOT ROD AND EARLY MUSCLE 457

Brake Boosters Brake Booster Brackets for 1967-72 GM
Part No. Description Full-Size Trucks and SUVs
RSDRPB1001 11" Delco Style Booster with Stamp Firewall-mounted brake
RSDRPB1003 11" Delco Style Booster without Stamp
booster brackets are made of
RSDRPB7537C 7" GM Dual Diaphragm Booster, Chrome
black powder-coated steel and
feature and adjustable pedal
Electric Vacuum Pump Kit extension rod. Available in two
different heights.
RSDEVP01
Part No. Description
Pump will activate at 14 in./hg and RSDBBK067 High-Rise Brake Booster Bracket
turn off at 20 in./hg. Kit includes RSDBBK068 Low-Rise Brake Booster Bracket
shockproof mounts, hose,
vacuum switch, relay, and wiring.

Stainless Steel Gravel Guard Drum Backing Plates for GM

10-/12-Bolt Axles
RSDGGS316S-20 Black painted steel drum backing plates
Flexible convoluted stainless are 9-3/4" in diameter and feature a 2-1/2"
steel guard fits over exposed center hole. For 1964-72 GM A-/X-Body
brake lines to protect them from cars and 1967-69 F-Body.
gravel and other road debris. 3/16"
Part No. Description
I.D. x 20 ft.
RSDDBBP81L Left-Side Drum Backing Plate
RSDDBBP81R Right-Side Drum Backing Plate
Ford Mustang
Disc Brake Brake Booster/Master Cylinder Combos
Conversion Kits Combos feature master
cylinders with dual integral
The kits include 11"
reservoirs, and
rotors, new calipers,
include proportioning
brackets, spacers,
valves, brackets, and
hardware, flex
installation hardware.
hoses, and weld-on
Zinc-plated finish.
hose brackets.
M.C.
Part No. Description Part No. Applications Dia. Diaphragm Bore
RSDZDC6405 1964-66 Mustang Power Front Disc Brake Kit RSDG10060171 1971-81 GM F-Body 11" Single 1-1/8"
1964-73 Mustang "At-the-Wheel" Front/Rear Kit for RSDG10060572 1971-81 GM F-Body 11" Single 1"
RSDZWK6455S Small Ford 9" or 8" Rear End, Drilled/Slotted Rotors,
RSDG10070171 1971-81 GM F-Body 11" Single 1"
Black Calipers
RSDG16720572 1967-70 GM B-Body 11" Single 1"
RSDG16720971 1967-70 GM B-Body 11" Single 1-1/4"
GM Master Cylinder Kits RSDG16820572 1967-70 GM B-Body 11" Single 1"
Available with valving for RSDG16820971 *
1967-72 GM Full-Size Truck/
11" Dual 1-1/8"
disc/drum or disc/disc SUV
configurations, these RSDG800110 1970-76 Mopar A-Body 8" Dual 1-1/16"
1967-72 GM Full-Size Truck/
master cylinders feature RSDG86810572 8" Dual 1"
SUV
an integrated reservoir and 1967-72 GM Full-Size Truck/
either an OE-style cover RSDG86810971
SUV
8" Dual 1-1/8"
or screw-on style cover. 1964-72 A-/X-Body, 1967-69
RSDG91020971 9" Single 1-1/8"
A proportioning valve is GM F-Body
included to fine-tune front/ RSDG91210572
1964-72 A-/X-Body, 1967-69
9" Single 1"
rear balance. GM F-Body
1964-72 A-/X-Body, 1967-69
Part No. Description RSDG91210971 9" Single 1"
GM F-Body
1962-68 GM X-Body w/ OE-Style Cover, 1955-70 Chevy Impala/
RSDB1871 RSDG94210572 9" Single 1"
Disc/Drum Bel Air
1962-68 GM X-Body w/ OE-Style Cover, 1967-72 GM Full-Size Truck/ Dual -
RSDB1872 RSDG96720572 9" 1"
Disc/Drum, Disc/Disc SUV - Disc Disc Slimline
1962-68 GM X-Body w/Screw-On Cover, 1967-72 GM Full-Size Truck/ Dual -
RSDB5671 RSDG96720971 9" 1-1/4"
Disc/Drum SUV - Disc/Drum Slimline
1962-68 GM X-Body w/Screw-On Cover, 1967-72 GM Full-Size Truck/
RSDB5672 RSDG96810572 * 9" Single 1"
Disc/Disc SUV - Disc/Disc
1967-72 GM Full-Size Truck/
RSDG96810971 * 9" Single 1-1/4"
SUV - Disc/Drum
1967-72 GM Full-Size Truck/ Single -
RSDG96820572 * 9" 1"
SUV - Disc/Disc Slimline
1967-72 GM Full-Size Truck/ Single -
RSDG96820971 * 9" 1"
SUV - Disc/Drum Slimline
* Includes low-rise booster bracket.

458 2023 - 2024 HOT ROD AND EARLY MUSCLE

HPS™ – High-Performance Max ATF Transmission Fluid
Street Motor Oil Replaces GM Dexron Type III or Ford
Royal Purple HPS Series motor oil is Mercon applications. Non-foaming fluid
specifically formulated to maximize withstands extreme heat, has long-life
performance and meet the demands characteristics and is extremely stable
of high performance and modified at high temperatures. Experience
engines. HPS is recommended for unbelievably smooth shifts due to the
vehicles no longer under manufacturer lower friction of Max ATF. Sold in one-
warranty and for those seeking a quart bottles or a case.
higher level of performance and Case of (6)
1-qt. Bottle 1-qt. Bottles
protection. This unique blend enables ROY01320 ROY06320
HPS to outperform leading synthetics
and conventional lubricants for both
gasoline and diesel engines. Royal Purple’s HPS is
HMX™ – High Mileage
fortified with a high level of zinc/phosphorus anti-wear Motor Oil
additive. For vehicles under warranty, Royal Purple Royal Purple HMX is specifically
recommends its API-licensed oils. Not API certified. formulated with robust zinc/
Case of (6) phosphorus anti-wear additives and
Description 1-qt. Bottle 1-qt. Bottles Royal Purple’s proprietary additive
5W-20 ROY31520 ROY36520 technology Synerlec to minimize wear
5W-30 ROY31530 ROY36530 and restore lost engine performance.
10W-30 ROY31130 ROY36130 HMX is chemically enhanced to
10W-40 — ROY36140
revitalize hardened seals reducing
20W-50 ROY31250 ROY36250
oil consumption common in higher
mileage engines. Stout detergents
remove engine deposits and maintain
cleanliness promoting engine
Synthetic Motor Oil longevity.
One of the Best synthetics available
Case of (6) Case of (3)
for original equipment. Specially Description 1-qt. Bottle 1-qt. Bottles 5-Qt. Jug 5-qt. Jugs
formulated SAE grades are suitable for 5W-20 HMX ROY17511 ROY67511 ROY17518 ROY37518
everything from general transportation 5W-30 HMX ROY11744 ROY11745 ROY11748 ROY11749
to budget-minded racing. A long-life oil, 10W-30 HMX ROY11746 ROY11747 ROY11750 ROY11751
it keeps engines cleaner for better gas
mileage and reduced oil consumption.
One-quart container, unless specified. Max-EZ Power Steering Fluid
API certified. Max-EZ is a consistent high-performance
Case of (6) Case of (3) power steering fluid that resists high
Description 1-qt. Bottle 1-qt. Bottles 5-qt.Jug 5-qt. Jugs temperatures and pressures that develop
30W ROY01030 ROY06030 — — in power steering units. Non-foaming,
40W ROY01040 ROY06040 — —
Max-EZ actually reduces temperatures and
50W ROY01050 ROY06050 — —
0W-20 ROY01020 ROY06020 ROY51020 ROY53020
increases pump life. Sold in 12-oz. bottles
0W-40 ROY11484 ROY06484 — — or a case.
5W-20 ROY01520 ROY06520 ROY51520 ROY53520 Case of (12)
5W-30 ROY01530 ROY06530 ROY51530 ROY53530 12-oz. Bottle 12-oz. Bottles
5W-40 ROY01540 ROY06540 — — ROY01326 ROY12326
10W-30 ROY01130 ROY06130 ROY51130 ROY53130
20W-50 ROY31250 ROY36250 — —
Max-Tuff
Engine Break-In Oil Max-Tuff is an ultra-tough synthetic
Because anti-scuff additives have been lubricant. It’s designed for engine builds
removed from modern motor oils, Royal and repairs, specifically crankshaft,
Purple has developed a new break-in camshaft, and rod bearing assembly. Max-
formula to protect flat tappet engines Tuff utilizes unique synthetic molecules
from severe damage. Fortified with that adhere to metal surfaces to create
zinc and phosphorous additives, this a formidable, load-bearing physical
break-in oil will prevent premature wear barrier between surfaces. This minimizes
on cams and lifters. Sold in one-quart the metal-to-metal contact and wear
bottles or a case. Not API certified. in boundary lubrication conditions, and
Case of (6)
provides excellent protection against
1-qt. Bottle 1-qt. Bottles rust and corrosion of both ferrous and
ROY11487 ROY06487 nonferrous metals.
Case of (12)
8-oz. Bottle 8-oz. Bottles
ROY01335 ROY12335

2023 - 2024 HOT ROD AND EARLY MUSCLE 459

Manual Transmission Fluid Max-Boost™ Octane Booster
Synchromax™ and Fuel System Stabilizer
Synochromax™ is recommended for manual Max-Boost is a high-performance octane
transmissions that require an automatic booster and fuel treatment for racing
transmission fluid or motor oil. Improves shift applications that increases gasoline octane,
quality over a wide temperature range and reduces emissions, and enhances engine
reduces gear noise. Sold in one-quart bottles performance while stabilizing fuel. Max-
or a case. Boost delivers the best octane enhancement
Case of (6) to help eliminate engine damaging
1-qt. Bottle 1-qt. Bottles detonation, pre-ignition, and pinging or
ROY01512 ROY06512
knocking from low-octane gasoline. Raises
octane rating up to 30 points or 3 numbers.
Max-Gear Gear Oil One can of Max-Boost treats up to 25 gallons of gasoline.
The ideal high-performance gear oil, Max- Max-Boost is a racing formula and is not street legal.
Gear has an impact absorbing, non-shearing Case of (6)
molecular structure to reduce internal friction 16-oz. Bottle 16-oz. Bottles
and resultant heat and wear. Sold in one-quart ROY11757 ROY06757
bottles or a case.
Case of (6)
Description 1-qt. Bottle 1-qt. Bottles Max-Tane™
75W-90 ROY01300 ROY06300
75W-140 ROY01301 ROY06301 Diesel Fuel Injection Cleaner
Max-Tane is for year-round use in all types
Purple Ice Radiator of light, medium, and heavy-duty diesel
engines, and is compatible with any type or
Super Coolant grade of diesel fuel, including #1 diesel and
Purple Ice reduces the surface tension of #2 diesel, biodiesel, and ultra-low-sulfur
the coolant so it can penetrate the porous diesel (ULSD). 5 ounces treats 25 gallons.
metal surfaces in vital heat transfer areas
Case of (6)
of the radiator. An exclusive ingredient, 20-oz. Can 20-oz. Cans
Molybdate, provides a protective coating ROY11755 ROY06755
for aluminum parts, preventing corrosion
and erosion. Ideal for use where glycol
(anti-freeze) is not used. Sold in 16-oz. Max-Clean™ Fuel System
bottles or as a case.
Cleaner and Stabilizer
Case of (12) Max-Clean is a state-of-the-art synthetic
16-oz. Bottle 16-oz. Bottles
ROY01600 ROY12600 fuel system clean that deeply penetrates
and cleans injectors, carburetors, intake
Maxfilm® valves and combustion chambers to restore
fuel veconomy and reduce emissions.
Maxfilm is a high film strength, multipurpose,
Recommended treat rate and usage: add
synthetic lubricant/penetrant that excels in
6 oz. to 20 gallons of fuel every 3,000 miles,
a wide array of applications. Maxfilm deeply
or add a 20-oz. can to 20 gallons of fuel every
penetrates, cleans, and loosens rusted parts.
10,000 miles.
Once applied, its solvent carrier evaporates
and leaves a tenacious thixotrophic Case of (6)
20-oz. Can 20-oz. Cans
lubricating film on all metal surfaces, ROY11722 ROY11723
providing long-lasting protection against
wear, rust, and corrosion. Sold in
11-oz. aerosol cans.
Case of (12)
11-oz. Can 11-oz. Cans
ROY05000 ROY15000

460 2023 - 2024 HOT ROD AND EARLY MUSCLE

 Proflex Stainless
Endura™ Finish Hose Steel Braided Hose
Ends Chlorinated polyethylene
Endura gives aluminum synthetic rubber liner is
hose ends the appearance surrounded by a heat-
of polished stainless steel. resistant nylon inner
Unique tapered design eases braid and a stainless
assembly and the ends steel outer braid for
are completely reusable. maximum resistance to
Russell Endura ends are abrasion and corrosion.
interchangeable with those We offer Proflex in pre-
from other manufacturers. packaged rolls of 3-, 6-, 10-, 15-, and 20-foot lengths in
Part No. AN Size -4, -6, and -8AN sizes.
Straight AN
RUS610021 -6 3 Ft. 6 Ft. 10 Ft. 15 Ft. 20 Ft. Size
RUS610031 -8 Proflex Pre-Packaged Rolls
45° — RUS632010 — — — -4
RUS610091 -6 RUS632050 RUS632060 RUS632070 RUS632080 RUS632090 -6
90° RUS632100 RUS632110 RUS632120 RUS632130 RUS632140 -8
RUS610161 -6
RUS610171 -8 Speed Bleeder Bag
120°
RUS610221 -6 RUS639500
EPA-approved, 7" x 7" bag
Endura Flare to Pipe Straight Adapters with plastic tubing and
a tube connector holds
Part No. AN Size Pipe Size
RUS660411 -3 1/8" NPT
approximately 12 ounces
RUS660421 -4 1/8" NPT and makes brake bleeding
RUS660431 -4 1/4" NPT a no-spill, no-mess
RUS660441 -6 1/4" NPT operation.
RUS660461 -6 3/8" NPT
RUS670151
RUS660481
-6
-8
1/2" NPT
3/8" NPT
Speed Bleeder
RUS660491 -8 1/2" NPT
The easy way to bleed hydraulic brake and
clutch systems. The Speed Bleeder has a
spring-loaded, one-way check valve to
Endura Flare to allow old fluid to pass while preventing
Pipe Adapter incoming air.
45° 90° AN Pipe Length Thread Part No.
Part No. Part No. Size Size 1.25" 7/16"-20 RUS639510
RUS660931 RUS660791 -3 1/8" NPT 1" 1/4"-28 RUS639540
— RUS660801 -4 1/8" NPT 35mm 10mm x 1.0 RUS639560
— RUS660821 -6 1/4" NPT 34mm 7mm x 1.0 RUS639570
— RUS660831 -6 1/8" NPT 30mm 10mm x 1.5mm RUS639580
RUS662391 RUS660841 -6 3/8" NPT 1" 3/8"-24 RUS639590
33mm 10mm x 1.25 RUS639610
33mm 10mm x 1.0 RUS639630

Endura Carb/ RUS640381

Fuel Pump Adapters
Part No. Description
-6AN for Ford, Chrysler and Early Chevy Fuel Pumps
RUS640331
with 1/2"-20 Inverted Flare Threads
-6AN for 1970 and Later Chevy Fuel Pumps and Inline Filters
RUS640381
with 5/8"-18 Inverted Flare Threads
-6AN for Holley Single Feed 600-660 Series,
RUS640201 Dual Feed 4010-4011 Series, All Two-Barrel Series
and Demon with 9/16"-24 Threads
-6AN for Edelbrock Thunder Series, Performer Series
RUS640241
and Carter AFB Carburetors with 5/8"-20 Threads

2023 - 2024 HOT ROD AND EARLY MUSCLE 461

Pre-Assembled, Direct Bolt-On Brake Hose Kits
Direct bolt-on brake hoses bring the ultimate in braking performance. They improve
pedal feel and consistency for competition or everyday driving. Replacing the O.E.
rubber hoses with Russell brake hoses reduces brake hose expansion for more
consistent braking. Featuring stainless steel braided hose with zinc-plated fittings,
these brake hoses are factory assembled for convenient installation. They meet the
guidelines of the U.S. Dept. of Transportation MVSS-571.106 requirements.
Brake Hose Speed Bleeders
Year and Model Part No. Front Rear Hoses Per Kit Front Rear
Chevrolet
1969-76 Camaro (Except 1969 Z/28) RUS692080 Disc Drum 3 RUS639530 RUS639530
1984-88 Camaro RUS692050 Disc Drum 3 RUS639580 —
1984-88 Camaro RUS692360 Disc Disc 4 RUS639580 —
1989-92 Camaro RUS692050 Disc Drum 3 RUS639580 —
1989-92 Camaro RUS692370 Disc Disc 5 RUS639580 RUS639560
1969-72 Chevelle RUS692080 Disc Drum 3 RUS639590 RUS639530
1963-82 Corvette RUS692000 Disc Disc 4 RUS639530 RUS639530
1988-92 Corvette (Including 1990-92 ZR-1) — Disc Disc 4 RUS639630 RUS639630
1997-04 Corvette C5 (Including Z06) — Disc Disc 4 RUS639630 RUS639630
1970-72 Monte Carlo RUS692080 Disc Drum 3 RUS639590 RUS639530
1979-88 Monte Carlo RUS692100 Disc Drum 3 RUS639580 RUS639520
1969-72 Nova RUS692080 Disc Drum 3 RUS639590 RUS639530
Pontiac
1969-76 Firebird/Trans Am RUS692080 Disc Drum 3 RUS639590 RUS639530
1984-88 Firebird/Trans Am RUS692050 Disc Drum 3 RUS639580 RUS639520
1984-88 Firebird/Trans Am RUS692360 Disc Disc 4 — —
1989-92 Firebird/Trans Am RUS692050 Disc Drum 3 RUS639580 —
1979-81 Grand Am RUS692100 Disc Drum 3 — —
1979-87 Grand Prix RUS692100 Disc Drum 3 RUS639580 RUS639520
1969-72 GTO RUS692080 Disc Drum 3 RUS639590 RUS639530

Russell Performance offers an array of AN fittings and braided hose for applications
from stripped to street to show! Choose from the traditional blue/red, nickel-plated,
black/silver, or black anodized fittings and combine with Russell braided hose to get
that custom plumbing look.

462 2023 - 2024 HOT ROD AND EARLY MUSCLE

S-A Design Books
We are showing just a sampling of what S-A DESIGN has
to offer. Many more titles are available. Give us a call.
Part No. Title Part No. Title
Automotive Performance Books Automotive Performance Books
SABSA26 How to Rebuild the SB Chevy SABSA248 How to Restore C3 Corvette: 1968-1982
SABSA57 How to Build Max Performance SB Chevy on a Budget SABSA251 Modern Engine Blueprinting Techniques
SABSA86 How to Build High Performance Chevy LS1/LS6 V8s SABSA255 How to Use & Upgrade to GM LS Series Powvertrain
SABSA102 How to Rebuild the Small Block Ford SABSA278 How to Build & Modify Muncie 4-Speed Transmission
SABSA113 How to Rebuild & Modify Quadrajet Carburetors SABSA279 Ford AOD Transmission: Rebuild and Modify
SABSA116 Rebuilding the Small Block Chevy: Step-by-Step Videobook SABSA310 GM Differentials: How to Rebuild the 10 and 12 Bolt
SABSA117 How to Paint Your Car on a Budget SABSA313 Media Blasting and Metal Prepartation
SABSA123 Real World High-Performance Turbocharger Systems SABSA326 GM Turbo Trans How to Rebuild And Modify
SABSA135 Engine Management: Advanced Tuning SABSA327 1966-70 Mopar B-Body Restoration
SABSA140 GM Automatic Overdrive Transmission Builder's and Swapper's Guide SABSA330 How to Build Holley Carburetors
SABSA147 How to Rebuild GM LS-Series Engines SABSA345 Automotive Wiring and Electrical Systems Vol. 2
SABSA156 How to Swap GM LS-Series Engines into Almost Anything SABSA379 How to Build Ford Flathead Engines
SABSA160 Automotive Wiring and Electical Systems SABSA393 Automotive Upholstery and Interior Restoration
SABSA161 Designing and Tuning High-Performance Fuel Injection Systems SABSA379 How to Build Ford Flathead Engines
SABSA166 Automotive Bodywork & Rust Repair
SABSA170 High-Performance Differentials, Axles, & Drivelines Part No. Title
SABSA183 How To Build Max-Performance Ford FE Engines Histories and Personalities Books
SABSA204 Performance Automotive Engine Math SABCT558 1970-74 Barracuda and Challenger Guide
SABSA215 David Vizard’s How to Port Cylinder Heads SABCT569 Kar-Kraft Fords Specialty Vehicle Activity
SABSA216 How to Tune & Modify Holley Carburetors SABCT581 1970 Plymouth Road Runner: Muscle Car in Detail
SABSA227 How to Rebuild and Modify Ford C4/C6 Transmissions SABCT589 1969 Ford Mustang Mach 1 : Muscle Cars in Detail
SABSA371 Muscle Car Brake Upgrades: How to Design, Select, and Install SABCT608 Chevrolets of the 1950's
SABSA411 How to Swap GM LT-Series Engines into Almost Anything SABCT618 1964-67 The Definitive Pontiac GTO Guide
SABSA420 How to Paint Muscle Cars & Show Cars Like a Pro SABCT620 COPO Chevrolets Ultimate Muscle Cars
SABSA429 How to Rebuild and Modify Chrysler Slant Six Engines The American Speed Shop: Birth and
SABCT595
SABSA447 Patina: How to Create & Preserve Evolution of Hot Rodding
SABSA456 How to Build Killer Chevy Small-Block Engines SABCT644 Lost Muscle Car Dealerships
SABSA458 How to Repair Automotive Air-Conditioning & Heating Systems SABCT650 Carroll Shelby: A Collection of My Favorite Racing Photos
SABSA460 How to Restore Your Chevy Truck: 1947-1955 SABCT663 Bullitt: The Cars and People Behind Steve McQueen
SABSA462 High-Performance Automotive Cooling Systems SABCT667 Oldsmobile W-Powered Muscle Cars
SABSA472 Ford Inline Six: How to Rebuild and Modify SABCT669 Muscle Cars in Detail No. 12 1969 Chevrolet Chevelle SS 396
SABSA475 How to Install Automotive Interior Kits Hemi Under Glass: Bob Riggle and
SABCT670S
SABSA477 How to Build Affordable Hot Rods His Wheel-Standing Mopars
SABSA501 Chevrolet Trucks 1955-1959: How to Build and Modify SABCT681 1966 Pontiac GTO: Muscle Cars in Detail No. 13
SABSA502 Oldsmobile V-8 Engines 1964-1990: How to Rebuild
SABSA504 AMC V-8 Engines 1966-1991: How to Rebuild & Modify
SABSA507 How to Build Max-Performance Ford 429/460 Engines

STBSTBSB3RSBK
Seat Belts and Anchor Plate Kits
Advanced, CAD-engineered seat belt system built with quality components.
Perfect for street rods or older street machines not originally equipped with
seat belts. Available in several colors, with standard or airplane-style buckle.
Choose 2-point, 2-point retractable, or 3-point retractable styles. Limited
lifetime warranty.
Part No. Description
Accessories
STBSTBSBHP Seat Belt Anchor
STBSTBSBHPA Angled Anchor Bracket Standard Airplane Style

2023 - 2024 HOT ROD AND EARLY MUSCLE 463

Pro Copper Gaskets
Tired of changing header gaskets? Try SCE Pro-Copper
Gaskets and never change them again. Pro Copper Gaskets
offer unparalleled protection from leakage
Part No. Description Part No. Description
SCE4011 Small Block Chevy, Round Port Exhaust Gaskets SCE4035 Ford 429-460 Oval Port Exhaust Gaskets
SCE4211 Small Block Chevy, Square Port 1.4" x 1.4" Exhaust Gaskets SCE4064 Big Block Chrysler, 1.7" x 1.475" Exhaust Gaskets
SCE4611 Small Block Chevy LT-1, “D” Port Exhaust Gaskets SCE4164 Big Block Chrysler 383-440, Stock Port Exhaust Gaskets
SCE4013 Big Block Chevy, 1-7/8" Round Port Exhaust Gaskets SCE4128 Pontiac 326-455, “D” Port Exhaust Gaskets
SCE4113 Big Block Chevy, Stock Square Port Exhaust Gaskets SCE4250 2-1/2" Collector Gasket
SCE4213 Big Block Chevy, Round Port 2.4" Exhaust Gaskets SCE4300 3" Collector Gasket
SCE4036 Small Block Ford 289-351W Including GT-40 Exhaust Gaskets SCE4350 3-1/2" Collector Gasket
SCE4034 Ford FE 352-428, Exhaust Gaskets

Street Rod Headers

Sanderson builds headers just for street rods! No matter what engine is
being used, the chances are that Sanderson has a header to fit. Headers are
16-gauge tubing with a virtually leak-proof, 3/8" thick mating flange. We only
stock the headers listed, but don't hesitate to call for a particular application.
We'll be happy to order it.
Primary Collector Standard Coated
Description Dia. Dia. Part No. Part No.
SB Chevy, Block Hugger 1-1/2" 2-1/2" — SANCC1C
SB Chevy, D-Port ZZ4/Fastburn 1-5/8" 3" SANCC1DP-P —

Shaved-40 Shaved Door Kit Power Door Replacement Solenoid

SPASHAVED-40 SPASIL40K
Solenoid has over 40 pounds
of force and a small mounting
size, making it perfect for
early street rods with small
doors, antique vehicles, and
many more. Sold individually.

DP-3 Door Popper

SPADP-3
The DP-3 door popper features
Door kit has it all for those looking to upgrade the look aluminum and stainless
of a vehicle. The 40- pound solenoids will open virtually steel construction and is
any door on the market today. Seven-channel receiver designed for a flush or surface
can also be used to control up to seven vehicle functions mounting. The tips of the
remotely. Kit includes seven-channel reciever, two poppers can be cut down to give the exact push required.
remote transmitters, two solenoids with 40 pounds of Sold individually.
pull, and hardware.

464 2023 - 2024 HOT ROD AND EARLY MUSCLE

 Cooling Fans
Fan Harness Kits Recognized worldwide, SPAL
Designed fans are among the finest
to safely performance fans available. Curved
integrate with Mounting brackets included. Style
OEM wiring,
kits feature Blade Overall
Part No. Diameter CFM Depth
Style Diameter
a waterproof SPA30103009 4" Pusher Paddle 124 4.29" 2.36"
10/50-amp SPA30103011 5.2" Puller Paddle 313 5.51" 2.36"
relay and SPA30103013 5.2" Pusher Paddle 313 5.51" 2.36"
printed SPA30100393 7.5" Pusher Straight 437 8.27" 2.05"
markings on SPA30102061 9" Puller Paddle 826 9.74" 3.76"
wires to ease SPA30102053 9" Pusher Paddle 767 9.74" 3.76"
installation. SPA30100392 9" Puller Straight 590 9.72" 2.05"
SPA30100452 9" Puller Curved 708 9.72" 1.1"
Kits include:
SPA30100381 9" Pusher Straight 590 9.72" 2.05"
fan relay
SPA30100435 10" Puller Curved 802 11.16" 2.01"
harness, fan pigtail, fuse holder, thermal switch, 3/8" to SPA30100360 10" Puller Straight 749 11.20" 2.05"
1/2" adapter, 30-amp fuse, yellow butt connector, yellow SPA30102057 10" Puller Paddle 1115 10.94" 3.75"
ring connector, and blue ring connector. SPA30102058 10" Pusher Paddle 1115 10.94" 3.75"
Part No Description SPA30100374 10" Pusher Straight 649 11.20" 2.05"
SPA185FH SPA185-TS Thermal Switch (Fan On 185°F, Off 165°F) SPA30100320 10.5" Puller Curved 7.97 11.16" 2.01"
SPA195FH SPA195-TS Thermal Switch (Fan On 195°F, Off 175°F) SPA30102040 11" Pusher Paddle 1363 12.36" 3.70"
Thermal Switches SPA30100365 11" Pusher Straight 808 12.20" 2.05"
SPA185-TS Thermal Switch, Fan On 185°F, Off 165°F SPA30102800 11" Puller Curved 1604 11.70" 4.39"
SPA185-2TS 2-Wire Thermal Switch, Fan On 185°F, Off 165°F SPA30100411 11" Puller Curved 844 12.20" 2.05"
SPA195-TS Thermal Switch, Fan On 195°F, Off 175°F SPA30101500 11" Puller Straight 962 12.20" 2.48"
SPA30100364 11" Puller Straight 808 12.20" 2.05"
Fan Pigtail with SPA30101502 11" Pusher Straight 962 12.20" 2.48"
SPA30102052 Dual 11" Puller Paddle 2780 23.46" 4.25"
Metri-Pack 280 SPA30102025 12" Pusher Paddle 1640 13.03" 3.76"
Connector SPA30100375 12" Puller Straight 861 13.19" 2.05"
SPA30101522 12" Puller Curved 1328 13.23" 2.48"
SPAFR-PT15300027 SPA30100467 12" Puller Curved 909 13.23" 2.05"
The SPAL fan pigtail is for SPA30102029 12" Puller Curved 1328 13.03" 3.43"
use with the SPA30102113 SPA30100384 12" Pusher Straight 861 13.19" 2.05"
(Extreme Performance 16") SPA30102030 12" Pusher Curved 1360 13.03" 3.43"
and SPA30102130 (High-Performance Dual 12") fans. SPA30101504 12" Puller Straight 1227 13.23" 2.48"
SPA30101505 12" Pusher Straight 1227 13.23" 2.48"
SPA30102130* Dual 12" Puller Curved 3168 25.83" 4.02"
SPA30101507 13" Puller Straight 1220 14.17" 2.48"
Fan Relay SPA30101508 13" Pusher Straight 1250 14.17" 2.48"
Harnesses SPA30100399 13" Pusher Curved 1032 14.17" 2.05"
SPA30102044 13" Puller Curved 1777 14.17" 3.45"
The SPAL fan relay SPA30100398 13" Puller Straight 1032 14.17" 2.05"
wiring kits are a must- SPA30100382 14" Pusher Curved 1038 15.04" 2.05"
have when installing SPA30101509 14" Puller Straight 1274 15.04" 2.48"
an electric fan. Safely SPA30101510 14" Pusher Straight 1274 15.04" 2.48"
integrates with OEM SPA30100385 14" Puller Straight 1038 15.04" 2.05"
wiring. SPA30102042 14" Puller Curved 1652 15.04" 3.47"
SPA30102056 14" Pusher Curved 1840 15.04" 3.47"
Part No. Description
SPAFRH Fan Relay Harness Safely Integrates with OEM Wiring SPA30102041 14" Puller Straight 1623 15.04" 3.47"
Fan Jumper Harness For SPA30102800, SPA3010320, SPA30100401 16" Pusher Straight 1298 16.30" 2.05"
SPAFR-PT-HO SPA30102803 16" Puller Curved 1953 15.70" 4.41"
SPA30102803
SPA30102047 16" Pusher Straight 2030 16.30" 3.47"
SPA30102048 16" Pusher Curved 1959 16.30" 3.47"
Fan Pigtail SPA30102082 16" Pusher Paddle 1876 15.71" 3.74"
with AMP Connector SPA30101516 16" Puller Straight 1604 16.30" 2.48"
SPA30101517 16" Pusher Straight 1604 16.30" 2.48"
SPAFR-PT SPA30102113* 16" Puller Curved 2467 16.30" 3.65"
The SPAL fan pigtail is our standard pigtail and features * Use Spal Pigtail SPAFR-PT15300027.
an AMP connector. It is for
use with the majority of
our fan line. Electric Fan Accessories
Part No. Description
SPA30130013 Fan Mounting Rod with Cushion
SPA30130032 Fan Mounting Bracket, 1.13" Raised
SPA30130033 Fan Mounting Bracket, 2.31" Raised

SPA30130032

2023 - 2024 HOT ROD AND EARLY MUSCLE 465

Hi-Tech Engine Enamel Rust Converter
Heat-resistant, fast-drying, gas/oil-resistant SEY16-45
engine paint matches original factory color. Formulated to penetrate rust and turn it into
Sold each. a protective black coating, this converter
Part No. Description and primer can be applied to any iron or steel
SEYEN-42 Universal Black, 12-oz. Aerosol surface. The protective coating will resist
SEYEN-43 Ford Gray, 12-oz. Aerosol
moisture and prevent any further rust from
SEYEN-44 Ford/Chrysler Red, 12-oz. Aerosol
SEYEN-46 Ford Blue, 12-oz. Aerosol
occuring. Compatible with most top coats.
SEYEN-48 Chevy Orange, 12-oz. Aerosol 12-oz. aerosol. Sold each.
SEYEN-50 Universal Gold, 12-oz. Aerosol
SEYEN-56 Ford/Mustang Blue, 12-oz. Aerosol Hi-Tech Primers
SEYEN-59 General Motors Red, 12-oz. Aerosol Fast drying, phenolic resin primer provides
SEYEN-63 Chrysler Blue, 12-oz. Aerosol
maximum rust protection and finishing top coat
SEYEN-67 General Motors Blue, 12-oz. Aerosol
SEYEN-70 Clear Gloss, 12-oz. Aerosol
adhesion. Can be used with lacquer, enamel, and
SEYEN-71 Dull Aluminum, 12-oz. Aerosol acrylic paints. Sold each.
SEYEN-76 Hemi Orange, 12-oz. Aerosol Part No. Description
SEY16-805 White, 12-oz. Aerosol
Hot Spot High Heat Paint SEY16-828
SEY16-831
Black, 12-oz. Aerosol
Light Gray, 12-oz. Aerosol
Heat-resistant paint designed to withstand
temperatures up to 1200°F. Creates a
porcelain-like bond at high temperatures.
Resists peeling, loss of adhesion, and Tool Crib®
blistering. Sold each. Toolmaker's Layout Ink Remover
Part No. Description SEY620-1559
SEY16-1202 White, 12-oz. Aerosol
A special formulation of solvents that delivers
SEY16-1203 Black, 12-oz. Aerosol
SEY16-2668 Cast Iron Gray, 12-oz. Aerosol
quick and easy removal of layout ink. Can also be
used as a lacquer remover, degreaser, and metal
parts cleaner. 16-oz. aerosol. Sold each.
PBE Professional Trim Paint
SEY20-1678
This flat black acrylic lacquer is formulated Tool Crib® Brake Cleaner
using an acrylic resin that resists fading
from ultraviolet light and degradation from SEY620-1548
chemicals. A heavy coat applied over enamel This fast-drying cleaner removes dust and
may cause lifting. Several light coats produce grease from brake parts and other metal objects,
a better finish than one heavy coat. 12-oz. contains no chlorinated solvents and is VOC
aerosol. Sold each. compliant. 15-oz. aerosol. Sold each.

PBE Self-Etching Primer

SEY20-1682 Tool Crib® Cleaner and Degreaser
Specially formulated to chemically etch bare
metal and aluminum in one easy step. Easily SEY620-1568
wiped down with mineral spirits or isopropyl. Heavy-duty cleaner quickly removes grease, oil,
16-oz. aerosol. Sold each. strips wax, and cleans without leaving a residue.
It is environmentally formulated and does not
contain caustic acids or chlorinated solvents.
Safe to use on most surfaces. 15-oz. aerosol.
Sold each.

Rubberized Undercoating
SEY20-046
A paintable black undercoating that forms a
rubberized skin to protect metal surfaces and
reduce road noise. Dries fast and does not bleed
through when topcoated. 18-oz. aerosol. Sold
each.

466 2023 - 2024 HOT ROD AND EARLY MUSCLE

Standard Oil Coolers
Standard, air-cooled oil cooler is the most flexible high-performance oil cooler on the market.
Setrab offers three different series with many types of height/width applications. All Setrab
coolers feature an in-line turbulator to gently stir the fluid being cooled, Setrab air fin, fully brazed construction, and proline
mounting brackets. All oil coolers are equipped with special M22 low-profile female fittings. AN fittings sold separately.
Part No. Oil Cooler Size Typical Application HP Engine Dimensions
SET50-113-7612 Series 1, 13 Row, M22 Diff/Gb/Ps/Vs Cooler N/A 8.25 x 6.325 x 4 x 2.5
SET50-119-7612 Series 1, 19 Row, M22 Diff/Gb/Sm Eng 100-150 8.25 x 6.325 x 5.75 x 2.5
SET50-610-7612 Series 6, 10 Row, M22 Diff/Gb/Compact Eng 90-130 13 x 11.125 x 3 x 2.5
SET50-613-7612 Series 6, 13 Row, M22 Diff/Gb/Sm Street Eng 170-200 13 x 11.125 x 4 x 2.5
SET50-616-7612 Series 6, 16 Row, M22 Diff/Gb/Mid Street Eng 190-220 13 x 11.125 x 4.375 x 2.5
SET50-619-7612 Series 6, 19 Row, M22 Diff/Gb/Sm Perf. Eng 220-310 13 x 11.125 x 5.375 x 2.5
SET50-625-7612 Series 6, 25 Row, M22 Diff/Gb/Hi Perf Eng 325-425 13 x 11.125 x 7.5 x 2.5
SET50-634-7612 Series 6, 34 Row, M22 Hgh Perf Eng 400-475 13 x 11.125 x 10.250 x 2.5
SET50-915-7612 Series 9, 15 Row, M22 Diff/Gb/Sm Hi Perf Eng 220-310 16 x 14.125 x 4.5 x 2.5
SET50-920-7612 Series 9, 20 Row, M22 Diff/Gb/Hi Perf Eng 300-400 16 x 14.125 x 6 x 2.5

Fanpacks
Setrab fanpacks combine the already high-performing oil cooler with high-volume, low-profile fans with unparalleled
performance, versatility, and ease of installation.

Oil Cooler Fanpack

SETFP119M22I
This lightweight compact performer features a Setrab Series 1, 19-row oil cooler and a low-profile
SPAL fan. Perfect for use as a low-HP engine oil cooler, high-HP auxiliary EOC, ATV/motorcycle EOC,
differential OC, trans OC, power steering OC, and fuel cooler. Dimensions 8.27" x 6.10" x 4.38". Weighs
only 3.55 pounds.

Two-Pass Oil System Fanpack

SETFP920M22I
This two-pass Setrab Proline 9-series, 20-row oil cooler and a 342 CFM SPAL fan is designed for stock
car racing for use in differential and transmission oil cooling at the most demanding race tracks.
Dimensions: 16" x 6.35" x 4.38". Weighs only 7.55 pounds.

Sprint Seat R100 Seat

Affordable, entry-level New entry level STEEL model seat
competition seat designed features re-designed bolsters, new
for the weekend racer, padding for improved comfort and
combining safety, styling, modern styling with reclining back.
and value. The lightweight Tubular steel construction with
shell is fitted with a rigid, bottom mounting. Seat comes with
tubular steel frame and a adjuster.
fire-retardant, no-slip cover.
Part No. Description
The seat offers openings SCO009014NRNR Black/Black
for five-point and six-point SCO009014NRGR Black/Gray
harnesses. Meets FIA
standards. SCO008235NR
Part No. Description
SCO008234LNR X-Large, Black Cloth
SCO008235NR Standard Large, Black Cloth SCO008235NRSKY
SCO008235NRSKY Standard Large, Black Vinyl

2023 - 2024 HOT ROD AND EARLY MUSCLE 467

Medium Size QRT Evo Seat Side Mount Seat Brackets
SCO008007RNR
Updated with the new ultra-light QRT
shell that is 7 pounds lighter than the
previous version, the QRT Evo series
of seats have been redesigned with a
reduced shoulder bolster dimension
for installation into tighter
cockpits, and raised shoulder
harness belt openings to fit taller
drivers comfortably. The QRT
Evo series also features the most Part No. Description
back angle rake of all Sparco SCO004902 Steel, Black (per seat)
SCO600W Aluminum, Black (per seat)
seats for a very comfortable
driving position. FIA-approved,
the Evo are Hans device Seat Track Set
compatible, and feature fire-retardant, non-slip fabric. SCO00493
This sliding track set
Grid Q Seat allows any bottom-
mounted seat to
SCO008009RNR slide forward and
Designed to provide the ultimate back. Can be used
lateral support, racing with 400 or 500
ergonomics, and safety, the Grid series direct-fit seat
Q features removable Velcro- bases. Sold per seat.
attached padding that allows
for ventilation channels.
Deep side bolsters and Seat Hardware Kit
supportive shoulder SCO50001
bolsters provide excellent This kit contains all nuts, bolts, and
lateral support, while washers to mount any seat to any
removable side cushions track or base. Sold per seat.
and larger harness slots
add an extra level of
adjustment for drivers
of all sizes. Built with the
ultra-light fiberglass QRT
shell for a 30% weight savings, the Grid Q is Hans device
compatible, and uses non-slip, fire-retardant fabric.

Stage 2 Boost Cooler for Gasoline Boost Cooler

Forced Induction Applications SNO310
SNO20010 This water-methanol injection kit is
Suited to fuel-injected or applicable to any forced induction
carbureted forced induction or traditional EFI engine. System
applications, Stage 2 methanol- features an LCD display screen and
water injection kit uses boost on-the-fly adjustability, making it
pressure to progressively inject easy to set up right from the driver’s
water-methanol into the engine, seat. Kit includes Ultra-High-Output
providing an improvement in pump, three-quart reservoir, digital
horsepower and torque over a wide variable mapping controller, nozzles, and necessary
range of RPM. Cooler intake charge hardware. Offered in universal or application specific
combines to offer increased performance and detonation kits.
suppression. Kit is sold complete with Ultra-High-Output
pump, three-quart reservoir, digital variable controller,
nozzles, and necessary hardware.

468 2023 - 2024 HOT ROD AND EARLY MUSCLE

Solenoid Upgrade Low Level Indicator
SNO40060 SNO40035
Shut-off style solenoid is required Provides notice when the
when mounting the injection nozzle reservoir is running low on
lower than the reservoir or when the fluid. Simple to install and wire
reservoir is rear-mounted, to prevent in any reservoir.
gravity flowing. Solenoid is also used to
prevent siphoning when the injection nozzle 2.5-Gallon Reservoir Upgrade
is mounted, after the throttle body and is
exposed to vacuum. SNO40014
Still fairly small in size,
2.5-gallon tank provides much
Dual Nozzle Upgrade more range than standard
SNO40040 3-qt. units. Tank is 13" long x
Kit allows adding another nozzle to 9-1/2" high x 7-1/2" wide and is
any Boost Cooler kit, often required sold complete with mounting
when more volume than a single straps, 15' of tubing and
nozzle can provide, or when dual required fittings. Includes a
plenum/throttle body/carburetor set- solenoid upgrade (SNO40060)
ups are employed. Includes tee junction, quick connect which should be used with any
fittings, nozzle holder, and hose. application that uses a rear-mounted reservoir.

Hyper-Sonic Water-Methanol Injection Nozzle

Constructed with 100% methanol-resistant nickel plating, the patented Hyper-Sonic design spins the fluid to supersonic
levels before forcing it through two venturi orifices to create the Hyper-Sonic micron droplet mist that has become the
industry leader in water-methanol technology. Removeable 80-micron filter. 1/8” NPT threads.
Part No. Description
SNON0100 1.0 GPH
SNON0150 1.5 GPH
SNON0350 3.5 GPH
SNON0400 4.0 GPH
SNON0600 6.0 GPH
SNON1400 14.0 GPH

HEI Distributors
Designed to make the conversion from breaker point ignition to high-energy ignition as painless as possible! Built with the
same great quality and performance as the ready-to-run distributors from Specialty Products, HEI distributors feature fully
adjustable mechanical advance and a reliable high-output 4-pin HEI module.
Cap Color
Application Black Red
Corvette 327 1962-68 (5.3L), 350 1973-75 (5.7L) — SPC3081R
Chevy SB/BB w/OEM Cap 262 1975-76, 283 1957-6, 327 1962-69, 350 1967-93, 396 1965-70, 427 1966-69, 454 1970-96 SPC3099BK —
Chevy SB/BB w/Super Cap 262 1975-76, 283 1957-67, 327 1962-69, 350 1967-93, 396 1965-70, 427 1966-69, 454 1970-96 SPC3100BK —
Ford SB 221 1962-63 (3.6L), 260 1962-65 (4.3L), 289 1963-68 (4.7L), 302 1968-95 (5.0L) SPC3101BK SPC3101R
Ford SB 351 Windsor V8 1969-91 (5.8L) SPC3102BK SPC3102R
Ford FE 352 1958-66 (5.8L), 390 1961-71 (6.4L), 406 1962-63 (6.6L), 410 1966-67 (6.7L), 427 1963-68 (7.0L) FE 428 1966-
SPC3109BK SPC3109R
70 (7.0L)
SB/BB Pontiac 301 1977-81 (4.9L), 326 1963-67 (5.3L), 389 1959-66 (6.4L), 421 1961-66 (6.9L) SB/BB Pontiac 428 1967-
SPC3104R
69 (7.0L), 455 1970-76 (7.5L)
SB/BB Oldsmobile 260 1975-82 (4.3L), 330 1964-67 (5.4L), 455 1968-73 (5.4L), 455 1968-76 (7.5L) SPC3105R

2023 - 2024 HOT ROD AND EARLY MUSCLE 469

 SPC7442

Chrome Valve Covers Chrome Oil Pans

Brightly plated, stamped SPC offers chrome-plated oil pans
steel covers add a touch of for a variety of modern V8s, many of
brilliance without breaking the which are hard to find anywhere else.
bank. Choose from short or tall, Part No. Description
baffled or unbaffled covers for SPC8331 SPC7442 Early Small Block Chevy, Drivers Side Dipstick
just about any modern V8. We've SPC7443 1979-85 Small Block Chevy, Pass. Side Dipstick
also listed all related valve cover accessories needed for SPC7441 1986-Up Small Block Chevy, 1-Pc. Rear Seal
a complete installation. SPC7444 Big Block Chevy Oil Pan
SPC7447 Small Block Mopar 360
Part No. Description
SPC7445 Small Block Ford, Front Sump
SPC7549 AMC 290-401
SPC7450 Big Block Ford FE 352-428
SPC8196 SB Chevy, Short, Baffled
SPC7452 Ford 351W
SPC8195 SB Chevy, Tall, Baffled
SPC7454 Ford 351C
SPC8333 BB Chevy, Short, Baffled
SPC8238 BB Chevy, Tall, Baffled
SPC8331 SB Ford, Baffled, 260-351W Chrome Dipsticks and Tube Assemblies
SPC8542 Ford 429-460, Baffled Part No. Description
SPC8332 Ford 351C, 351M-400 Cleveland, Baffled Engine
SPC8330 SB Mopar 273-360 Baffled SPC7171 Small Block Chevy
SPC8547 BB Mopar 383-440, Baffled SPC7170 Big Block Chevy
SPC7525 Pontiac 301-455, Tall Transmission
SPC8544 Olds 330-455, Baffled SPC7401 GM 350-400, 23-1/2" Long SPC7401
SPC7402 GM 350-400, 33-1/2" Long
Chrome Valve Cover Accessories SPC7403 Powerglide, 22-3/4" Long

Chrome Transmission Pans

Part No. Description
SPC7282 SPC7491 GM TH350
SPC7526
SPC7199 SPC7482-O SPC7493 GM TH400
SPC7602 GM Powerglide
Part No. Description
SPC7199* Push-In Breather SPC7601 Ford C-6
SPC7275* Mopar Style Push-In Breather SPC7600 Ford C-4
SPC7491
SPC7271 Twist in Breather
SPC7198 Push In Washable Breather, Tall, 2-1/2" Chrome Alternator Brackets
SPC7192 Push In Washable Breather, Short, 1-3/4"
Part No. Description SPC6073
SPC7204 Push In Breather Grommet/Plug SPC6071 1965-68 SB Chevy Short W/P
SPC7205 PCV Grommet SPC6073 1976-86 SB Chevy Long W/P
SPC7206 Baffled Breather Grommet SPC6072 1969-75 SB Chevy Long W/P
SPC7482-O Oil Hole Plug, Chrome Top SPC6074 1969-86 BB Chevy Long W/P
SPC7282 Chrome T-Bar Wing Nuts 4-1/4" Tall
SPC7281 Chrome T-Bar Wing Nuts 5" Tall
SPC7409 Chrome Spreader Bars, Long Style Miscellaneous Chrome Parts
SPC7526 Chrome Mini Style Spreader Bars
SPC7270 Chrome Breather Cap, Use with Oil Filler Tube
SPC7394 Chevy Chrome Oil Filler Tube
SPC7484 SB Chevy Steel Core Valve Cover Gaskets
SPC6057 SPC6060
* Requires use of SPC7204 grommet.
Part No. Description
SPC6057 Throttle Return Spring Bracket
Chrome Water Necks SPC7607 GM 350/400 Turbo Flywheel Cover
SPC7125 Rear End Cover GM 10-Bolt
Part No. Description
SPC7126 Rear End Cover GM 12-Bolt
SPC7285-O 1964-78 Pontiac, V8 with O-Ring
SPC7546 Rear End Cover, 1982-Up Camaro/Firebird, Monza
SPC7287-O 1955-65 Chevy, 45° Angle with O-Ring
SPC7288-O SPC7128 Rear End Cover, Dana 60
SPC7288-O 1966-75 Chevy, 45° Angle with O-Ring
SPC7221 Timing Cover for Big Block Chevy
SPC7122 Timing Cover for Small Block Chevy
Chrome Air Cleaners SPC7268 Timing Tab for Small Block Chevy 7", Balancer
Part No. Description SPC7197 Timing Tab for Small Block Chevy 8", Balancer
SPC7512A 6" Dia. 2-3/8" Tall SPC7265 Timing Tab for Big Block Chevy
SPC4300 14" Dia. 3" Tall with Recessed Base SPC6060 Coil Cover with Bracket
SPC4302 14" Dia. 3" Tall with Flat Base SPC6061 OE Coil Bracket for Small Block Chevy
SPC7276 Velocity Stack SPC7122X Timing Chain Cover for Small Block Chevy
SPC7276 SPC7396 Chrome Oil Filter Cover
SPC7627 Distributor Hold-Down Clamp Chevy V6/V8
SPC9123 Water Pump Fitting, 1/2"NPT, Long Style for 3/4" I.D. Hose
SPC9126 Intake Fitting 1/2"NPT Short for 5/8" Hose
SPC7396 Chrome Oil Filter Cover

470 2023 - 2024 HOT ROD AND EARLY MUSCLE

Wheel Center Caps Vacuum Reservoir Tank
Premium center caps provide a clean, Ensure sufficient
finished look to wheels. vacuum for power brake
Part No. Description systems with an external
SPC4035 Chrysler Road Wheel vacuum reservoir tank.
Available in chrome-
Universal Stainless Steel plated or black finished
steel, these compact
Radiator Hose Kits tanks provide extra
Stainless steel radiator hose kits vacuum capacity, and
help dress engine compartments include a check valve
SPC6354
and provide a premium, high-tech and all necessary
look. Kits include (1) 1-5/8” O.D. stainless steel hose, (2) mounting hardware.
1-5/8” I.D. rubber hose sleeve adapters, (2) 1-1/4” I.D. and
(2) 1-1/2” I.D. rubber reducers, and (8) hose clamps. Kits Part No. Description
Chrome Steel Check Valve
are also available with (2) aluminum end cap covers. SPC9971
and All Mounting Hardware Included
Available in 12”, 24”, and 48” length kits (48” kits include Black Steel Check Valve
doubled quantities of adapters, reducers, clamps, and SPC9971BK
and All Mounting Hardware Included
end cap covers). Available in natural stainless finish with
or without polished aluminum end cap covers, or in black Air Cleaner Kit
stainless finish with black anodized aluminum end cap Using a stamped
covers. steel base and top
Part No. Description Length (when applicable),
Natural stainless hose – polished end cap covers this 14” diameter, 3”
SPC7352 Stainless radiator hose kit – no end cap covers 24"
tall kit with a 5-1/8”
SPC7353 Stainless radiator hose kit – no end cap covers 36"
carb flange is an
SPC7354 Stainless radiator hose kit – no end cap covers 48" *
Black finished stainless hose – black anodized end cap covers
ideal accessory to improve performance and “dress-up”
SPC6452 Stainless radiator hose kit – no end cap covers 24" any engine compartment. Blue cotton filter media.
SPC6453 Stainless radiator hose kit – no end cap covers 36" Part Base Top Filter Color
SPC6454 Stainless radiator hose kit – no end cap covers 48" * SPC4309BL Drop Solid Blue Cotton Blue
* 48” kits include doubled quantities of end caps, adaptors, reducers and clamps. SPC4390BL Flat Solid Blue Cotton Black
SPC4391BL Drop Flow-Through Top Blue Cotton Black
Blue Cotton -
Universal Stainless Steel SPC4392BL Drop Flow-Through Top
High Lip
Black

Heater Hose Kits

Finish off your engine
compartment right with
stainless steel heater hoses!
Each kit includes (2) 44” long Round Air Cleaner Assembly
stainless steel 3/4” O.D. heater Black painted steel raised based
hoses, (4) 3/4” I.D. rubber hose assembly with a 5-1/8” carb flange
sleeve adapters, (4) 5/8” I.D. rubber and flat top.
reducers, and (8) hose clamps. Kits Part No. Description
are also available with (4) matching SPC4355BK 6-1/2” Round, 2-1/2” Tall Paper Element
aluminum end cap covers. Available in SPC4360BK 10” Round, 2” Tall Paper Element
natural stainless finish with or without
polished aluminum end cap covers, or in black stainless
finish with black anodized aluminum end cap covers.
Part No. Description
SPC6455 44" Length Heater Hose Kit with Black Aluminum End Caps Aluminum Differential Cover
SPC7355 44" Length Heater Hose Kit without Polished End Caps Natural finish. Includes hardware.

Part No. Description

SPC4900X Front, 8.25”, GM 10-Bolt
SPC4900XKIT Front, 8.25”, GM 10-Bolt, with Gasket
SPC4901X Rear, 8.5”/8.6”, GM 10-Bolt
SPC4902X Rear, 8.875” GM 12-Bolt
SPC4904X Rear, 10.5”, GM 14-Bolt
SPC4905X Rear, 10.25” /10.5”, Ford 12-Bolt

2023 - 2024 HOT ROD AND EARLY MUSCLE 471

GM F-Body Radiator Universal Aluminum Dash Knob
Reinforcement Bars SPC8430
Black powder-coated steel 1-9/16” long polished aluminum dash knob that
reinforcement bars. Sold in pairs. mounts to a 3/16” stud with set screw.
Part No. Description
SPC7608BK 1967-69 Carburetor Stud Kit
SPC7609BK 1970-81
SPC9129
Flexible Transmission Set of four 2-1/2” long studs with
washers and nuts. 5/16”-18 and 5/16”-24
Dipstick thread.
Features a flexible braided
stainless steel housing
with a black anodized Black Alternator
aluminum dipstick. Brackets
Factory length. Black painted steel.
Part No. Description Available as bracket only
GM and in kits with hardware.
SPC8200BK Turbo 350 Part No. Description
SPC8201BK Turbo 400 Universal
SPC8202BK 700R4 Upper, Driver/Passenger Side, Head Mount, 1”W x 14”L,
SPC8203BK Turbo 350/400 SPC6067BK
4” Adjustment Slot
SPC8204BK 700R4 Small Block Chevy
Chrysler SPC6068BK Top Mount, Head Mount, Short Water Pump
SPC8305BK Powerglide Upper, High Tech, Passenger Side, Mid Mount, Long Water
SPC6076BK
SPC8306BK 727 Pump, SBC/BBC
Ford Upper, High Tech, Passenger Side, Mid Mount, Water Pump
SPC6077BK
SPC8307BK AOD Mount, Long Water
SPC8308BK C4 Driver Side, Low Mount, Block Mount, Short Water Pump,
SPC6079BK
SPC8309BK C6 Kit
SPC6081BK Lower, Passenger Side – Steel, Long Water Pump
Driver Side, Low Mount, Water Pump Mount, Short Water,
SPC6083BK
Kit
Flexible Engine Oil Dipstick Big Block Chevy
Features a flexible braided stainless steel housing with a Driver Side, High Mount, Water Pump Mount, Short Water
SPC6078BK
black anodized aluminum dipstick. Pump, Kit
Part No. Description SPC6087BK Driver Side, Low Mount, Head Mount, Long Water Pump, Kit
Chevy Driver Side, Low Mount, Head Mount, Short Water Pump,
SPC6089BK
Kit
SPC8205BK Small Block Chevy, Late, Block Mount
Small Block Ford
SPC8206BK Small Block Chevy, Early, Block Mount
SPC6082BK Driver Side, Low/High Mount, Head Mount, Kit
SPC8207BK Big Block Chevy, Pan Mount
Chrysler
Ford
SPC6096BK Small Block Mopar, Passenger Side, Head Mount, Kit
SPC8320BK Small Block Ford, Timing Cover Mount
SPC6097BK Mopar B/RB-Series, Passenger Side, Head Mount, Kit
SPC8321BK Big Block Ford, Block Mount

Allen Head Pipe Plug Kit

Includes two each of 1/8”, 1/4”,
3/8”, and 1/2” NPT steel pipe
Filtered Air Cleaner Lids
plugs. 14” round black lid with built-in
paper gauze air filter.
Part No. Description
SPC8250 Zinc Oxide Coated Part No. Description
SPC8250BK Black Oxide Coated SPC7110A Red Filter
SPC7110ABK Black Filter
SPC7110ABL Blue Filter
Blue Small Block Ford Steel Valve Covers
SPC8331BL
These blue painted steel
tall and baffled valve
covers fit 1961-85 Ford
260-351W small block Solid Air Cleaner Lids
powerplants. 14” round steel air cleaner lid.
Part No. Description
SPC7112ABK Black
SPC7112ABL Blue

472 2023 - 2024 HOT ROD AND EARLY MUSCLE

Air Cleaner Base In-Line Fuel Filter
14” round steel air cleaner lid This inline fuel filter features a 3/8” hose barb
with 5-1/8” carb flange and a inlet and outlet, and a 5-micron paper filter.
drop base. Part No. Description
Part No. Description SPC9268 Zinc Oxide Coated Steel
SPC7112BBK Black SPC9268BK Black Painted Steel
SPC7112BBL Blue SPC9269 Natural Stainless Steel

Small Block Chevy

Timing Tab Radiator Overflow Tank
SPC7197BK
Black steel timing tab for use with
8” diameter balancers.

Blue 1-1/4” Breather Cap

SPC7199BL
1-1/4” diameter blue steel
breather cap.

Blue Small Block Ford Oil Black powder-coated stainless steel overflow tank.
Pan Includes mounting hardware and line clamps.
Part Size Dimensions Inlet - Outlet
SPC7445BL 1/4" Hose Barb Inlet -
Factory replacement front SPC9963BK 24 Ounce 10” Tall x 3” Diameter
1/4" Hose Barb Outlet
sump steel oil pan. Stock 1/4" Hose Barb Inlet -
SPC9964BK 52 Ounce 16” Tall x 4” Diameter
capacity and depth. Blue. 1/4" Hose Barb Outlet
5/16” Hose Barb Inlet -
SPC9966BK 20 Ounce 8” Tall x 5” Wide 5/16” Hose Barb Outlet
with Petcock Drain
1/4" Hose Barb Inlet -
SPC9973BK 18 Ounce 13” Tall x 2” Diameter
1/4" Hose Barb Outlet
1/4" Hose Barb Inlet -
SPC9974BK 22 Ounce 15” Tall x 2” Diameter
1/4" Hose Barb Outlet
1/4" Hose Barb Inlet -
SPC9975BK 26 Ounce 17” Tall x 2” Diameter
1/4" Hose Barb Outlet

Customize your hot rod with chrome-plated engine parts from Specialty Products.

SPC7444

SPC8333

SPC7170

2023 - 2024 HOT ROD AND EARLY MUSCLE 473

Adjustable Upper Control Arms for GM Muscle Cars
and Classic Full-Size Cars
With the most adjustability and best clearance of any aftermarket arm available,
these adjustable arms feature ball studs that are 1/2” taller than stock to provide an
improved camber curve. With the ability to adjust camber and caster by +/-3%, they
help achieve the feel and responsiveness of a modern suspension. Arms include
greaseable and rebuildable ball joints allow for long-term durability. Available with OE
or 1/4” extended studs. Sold in pairs.
Part No. Description Stud Taper Applications
Buick: 1964-72 GS, Skylark, Special Chevrolet: 19764-72 Chevelle, El Camino,
SPP97110 Adjustable Upper Control Arms for A-Body 7.12° Malibu, 1970-72 Monte Carlo, Oldsmobile: 1964-72 442, Cutless
Pontiac: 1964-72 GTO, LeMans; 1964-70 Tempest
Buick: 1973-74 Apollo; Chevrolet: 1967-69 Camaro; 1968-74 Nova
SPP97120 Adjustable Upper Control Arms for Gen 1 F-Body 7.12°
Pontiac: 1967-69 Firebird
Buick: 1971-85 LaSabre; 1973-77 Century, Regal 1975-79 Skylark
Chevrolet: 1970-81 Camaro; 1973-96 Caprice, 1973-77 El Camino, Malibu,Monte
SPP97130 Adjustable Upper Control Arms for Gen 2 F-Body 9.5° Carlo; 1973-96 Impala; 1975-79 Nova Oldsmobile: 1973-77 Cutlass; 1975-79 Omega,
1971-85 88 Pontiac: 1971-76 Bonneville; 1970-81 Firebird, 1973-75 Grand Am;1973-
77 Grand Prix, LeMans
Buick; 1978-87 Grand National, Regal Chevrolet; 1978-88 El Camino; 1978-83
Malibu; 1978-88 Monte Carlo; 1982-04 Blazer S Series, Jimmy S Series, S10/S15
SPP97140 Adjustable Upper Control Arms for G-Body 9.5°
Pickup/Sonoma (RWD) Oldmobile: 1978-88 Cutlass Pontiac: 1982-86 Bonneville;
1978-80 Grand Am; 1978-87 Grand Prix; 1978-81 LeMans
SPP97150 Adjustable Upper Control Arms for Gen 3-5 Full-Size 7.12° Chevrolet: 1958-64 Bel Air, Biscayne, Caprice, Impala
SPP97170 Adjustable Upper Control Arms for Chevy Tri-5 7.12° Chevrolet: 1955-57 Tri-5

Adjustable Upper Control Arms for Adjustable Upper Control Arms for Mopar A-,
C2 - C4 Corvettes B-, and E-Body
With a full +/-3° of camber These upper control arms provide
and caster adjustment, a full +/-3° of camber and caster
these upper control arms adjustment to maximize
provide maximum handling handling performance. Arms
and responsiveness. Arms include a steel cross shaft, ball
include stock-style ball joint plate, and are available with street or race pivots.
joints. Street-style control Street-style pivots have custom pivots and OE-style
arms feature custom pivots and minimal deflection rubber inserts, while race pivots are
OEM-style rubber inserts, while offset and include Delrin inserts. Sold individually per
race- style control arms have offset pivots with Delrin side.
inserts. Sold individually per side. Description Right Left
Part No. Description Style Dodge: 1962-65 All Passenger (except 880)
SPP94360 C2/C3 (1963-82) Street Right or Left 1970-74 Challenger; 1966-72 Charger,
SPP92740 C2/C3 (1963-82) Race Right or Left 1965-72 Coronet (Incl. Super Bee)
SPP94450 SPP94451
SPP92748 C4 (1984-87) Race Right Plymouth: 1962-64 All Passenger, 1970-74
Barracuda, 1965-70 Belvedere; 1967-71 GTX,
SPP92749 C4 (1984-87) Race Left
1968-72 Road Runner, 1965-72 Satellite
SPP92750 C4 (1988-96) Race Right
Dodge: 1973-76 Dart, Plymouth: 1973-75 Valiant SPP94460 SPP94461
SPP92751 C4 (1988-96) Race Left

Tubular Lower Control Arms for Gen 2 F-Body Tubular Lower Control Arms
and B-Body for GM A-Body and G-Body
SPP94378 Designed to lower the
With a tubular frame and front end by 1” and add 1°
rugged plate body, these of positive caster to GM
control arms add 2.5° of A-body and G-body cars,
positive caster to Gen 2 creating an aggressive,
Firebirds and Camaros, ready-to-run stance. Sold
as well as various 1971-85 in pairs. Optional ride height tuning kits are available for
GM B-body cars. Can be use with SPC Performance Pro Series springs to raise the
configured for stock or ride height, if desired. GM replacement cone-style bump
lowered height to create an aggressive, ready-to-run stops available (SPP95339, sold each).
stance. Optional ride height tuning kits are available for Part No. Description Applications
use with SPC Performance Pro Series springs to raise the Buick: 1964-72 GS, Skylark, Special Chevrolet: 1964-
762 Chevelle, El Camino, Malibu, 1970-72 Monte Carlo
ride height, if desired. GM replacement cone-style bump SPP94344 A-Body
Oldsmobile: 1964-72 442, Cutlass
stops available (SPP95339, sold each). Pontiac: 1964-72 GTO, LaMans, 1964-70 Tempest

474 2023 - 2024 HOT ROD AND EARLY MUSCLE

Pro Series Springs Adjustable Upper Control
Improve handling and create Arm for Gen 2
an aggressive stance with
high-quality springs that Mustangs
maintain the optimum rate Pre-set with 3° of
for excellent performance. caster to assist with
Front springs provide about return to center, these
1.3” of drop, while rear adjustable upper control
springs achieve approximately 1” of drop. Diamond black arms improve handling,
epoxy coating protects against corrosion. Springs have a and incorporate a billet aluminum cross-shaft with
lifetime warranty. “Shelby Drop” geometry that optimizes camber curve.
Maintenance-free xAxisTM sealed flex joints provide
Pro
Make Model Spring Rate Springs crisp, responsive handling. Provides camber adjustment
'A' Body - Set of 4 Springs - Front and Rear of +0.75° to -2.0°, and caster adjustment of +1.0° to
Buick GS, Skylark, Special (64-67) 550/165 SPP94391 +5.0° (when combined with factory adjustments). Sold
Buick GS, Skylark, Special (68-72) 550/112-188 SPP94392 individually, each control arm includes stock-type ball
Chevy Chevelle, El Camino, Malibu (64-67) 550/165 SPP94391 joint and installation hardware.
Chevelle, El Camino, Malibu,
Chevy 550/112-188 SPP94392 Part No. Make Year/Model
Monte Carlo (68-72)
1967-73 Mustang, 1966-69 Fairlane, 1966-69 Falcon,
Olds 442, Cutlass, Cutlass Supreme (64-67) 550/165 SPP94391 Ford
SPP94210 1970-77 Maveric, 1966-71 Ranchero, 1966-71 Torino
Olds 442, Cutlass, Cutlass Supreme (68-72) 550/112-188 SPP94392 Mercury 1966-77 Comet, 1967-73 Cougar, 1966-71 Cyclone
Pontiac GTO, LeMans, Tempest (64-67) 550/165 SPP94391
Pontiac GTO, LeMans, Tempest (68-72) 550/112-188 SPP94392
'F' Body - Set of 2 Springs - Front Only Adjustable Upper Control Arm and Caster Rod
Chevy Camaro (70-81) 577
SPP94394
for Gen 1
Pontiac Firebird (70-81) 577
'G' Body - Set of 4 Springs - Front and Rear
Mustangs
Buick Grand National, Regal (78-87) Give the handling
El Camino, Malibu, of 19641/2 to
Chevy
Monte Carlo (78-88) 1966 Mustangs a
675/114-188 SPP94390
Olds Cutlass, Cutlass Supreme (78-88) modern upgrade
Pontiac
Bonneville (83-86); Grand Am (78-80) with an adjustable
Grand Prix (78-88); LeMans (78-81) upper control arm and
adjustable strut rod. Upper control arm has 3° of caster
Coil-Over Mounting/Spacer Plates built in to improve return to center. OE-style bushings
Flat coil-over spring mounting/ protect the chassis mount and allow for easy caster
spacer plates maximize ride height adjustment. Camber can be adjusted between +0.75°
options and provide added coil and -2.0°, and caster can be set between +1.0° and +5.0°
stability on SPC Performance tubular (when combined with factory adjustments). Includes
control arms. Fine-tune vehicle stock-style ball joint, installation hardware, and two
height by stacking spacer plates, camber adjustment shims for additional camber fine-
using one spacer per side for ½” of tuning. Sold each.
added ride height, or two spacers Part No. Make Year/Model
per side for a 1” gain. Available 19641/2-66 Mustang, 1964-65 Falcon,
Ford
in packages of (2) or (4) spacers. Include mounting SPP94215 1964-65 Ranchero
hardware. Mercury 1964-65 Comet, 1964-65 Cyclone
Part No. Description Applications
SPP94348
A-Body & 1st Gen. F-Body
2 Spacers Adjustable Caster Rod
SPP94346
SPP95338
4 Spacers
2 Spacers
for 19641/2-66 Mustang
SPP95332
2nd Gen F-Body & G-Body
4 Spacers Adjustable strut rod
replaces the stock non-
adjustable strut rod to allow
Adjustable Upper Control up to 3° of caster, improving
Arm for Mustang II suspension geometry and tracking.
These upper control arms Includes low durometer bushings
provide a full +/-3° of camber to protect the chassis mount as well as
and caster adjustment mounting hardware. Sold each.
to maximize handling Part No. Make Year/Model
performance, making them 1964.5-66 Mustang, 1964-65 Falcon,
Ford
perfect for hot rod and custom chassis SPP94220 1964-65 Ranchero
builders. Sold individually, each control arm Mercury 1964-65 Comet, 1964-65 Cyclone
includes a stock-style ball joint and installation hardware.
Part No. Make Year/Model
For Coil-Overs
SPP94000 Ford
1974-78 Mustang II
For Stock or Air-Ride Suspensions
SPP94800 Ford

2023 - 2024 HOT ROD AND EARLY MUSCLE 475

OE-Style Ball Joints
Available in either 1/2” extended
length or standard, SPC ball
joints help improve handling
and responsiveness. Available
for various GM applications, SPP94019
greaseable 1/2” extended
length ball joints provide
for improved camber gain and increased control arm-
to-frame clearance. Standard OE-style ball joints are
offered in a variety of sizes and formats for GM, Mopar,
and Ford applications.
Part No. Description
1/2" Extended Legth OE-Style Ball Joints
Lower Ball Joint for GM 'A' Bodies
SPP94016
(Press in for 94344 Lower Arm)
SPP94017 Upper Ball Joint for GM Mid Size Bolt In Metric Plate
SPP94019 Upper Ball Joint for GM 1st Gen F Body & A Body (64-72)
OE-Style Ball Joints
SPP94006 Upper GM Mid-Sized Metric Bolt-In Ball Joint
SPP94007 Upper C4 Corvette Bolt-In Ball Joint

Clutch Quadrant, Cable, and Adjuster Package Speedometer

for 1982-93 Mustang Recalibration Driven Gears
STD555-7040 For 1979-98 Mustang manual or automatic
Patented double-hook clutch quadrant transmissions. Used for speedometer
is compatible with firewall adjusters recalibration when differential gear ratios have
and cables. Smooth sliding clutch cable been changed. Driven gears sold individually.
can be adjusted at the bellhousing or Part No. Description Gear Ratio
the firewall. Manual Trans., 7-Tooth Drive Gear,
1983-89 V8, Tremec TR-3550 And 4.10
STD392-STE-
TKO
17271-D
Tri-Ax Shifters for 1983-93 Manual Trans., 8-Tooth Drive Gear,
3.55 and 3.73
1990-93 5-Speed
Mustang T-5/T-45 Transmission Auto Trans., 7-Tooth Drive Gear,
4.10
STD555-7353 STD392-STE- 1983-89
17271-J Auto Trans., 8-Tooth Drive Gear,
CNC-machined aluminum shifters have 3.55 and 3.73
1990-93
positive stops, two-position height
adjustment, and exclusive BootGuard to
protect the stock inner shift boot. Revised Sport Spring Kits
pivot shortens throw without sacrificing STD555-8200
comfort. Improve the appearance and handling of 1979-
93 Mustangs without affecting ride quality. Kit
Heavy-Duty Upper Rear Control Arms installation lowers the car approximately 1". Each
kit includes two front and two rear coil springs.
for 1979-93 Mustang
STD555-4100 X2 Ball Joints
Upper rear control arms are
available in heavy-duty and heavy-duty double- STD555-8101
adjustable versions. Both are polyurethane bushed and Ideal for lowered 1994-04 Mustangs, custom
will improve handling and traction. Double-adjustable length ball joints raise the roll center, enhance
arms allow adjustment of pinion angle for maximum handling, and reduce body roll. Oversized
traction. sway bars and/or increased spring rates are
not needed. Steeda bump steer
kit is recommended. Sold in
pairs.

476 2023 - 2024 HOT ROD AND EARLY MUSCLE

Locking Header Bolts
The only reusable, locking header bolts. Also available in stainless steel for limited usage.
Part No. Description Part No. Description
Chevrolet Chrysler
SGE8900 GM LS1/LS6, 8mm-1.25 x 22mm 6-Pt. DHH, 12-Pcs. SGE8915 SB 273-360, 5/16"-18 x 7/8" 6-Pt. DHH, 12-Pcs.
SGE8931 SB 265-400, 3/8"-16 x 3/4" 12-Pt., 12-Pcs. SGE8935 SB 273-360, 5/16"-18 x 1" 12-Pt. 12-Pcs.
SB 265-400 V8 Except ZR1 Or With Brodix Heads, SGE8916A* BB 383-440, Buick/Olds/Pontiac, 3/8"-16 x 1" 6-Pt. DHH, 12-Pcs.
SGE8911
3/8"-16 x 3/4" Bolts, 6-Pt., DHH, 12-Pcs. SGE8936* BB 383-440, Buick/Olds/Pontiac, 3/8"-16 x 1" 12-Pt., 12-Pcs.
SGE8911A SB 265-400 V8, 3/8"-16 x 1" Bolts, 6-Pt., DHH, 12-Pcs. Ford
SGE8951 SB 265-400, 3/8"-16 x 1" 6-Pt., Stainless, 12-Pcs. SGE8906 4.6/5.4L Modular, 8mm-1.25 x 22mm 6-Pt., DHH, 16-Pcs
SGE8912 BB 396-502 V8, 3/8"-16 x 3/4" Bolts, 6-Pt., DHH, 16-Pcs. SGE8913 5.0 Liter V8, (16) 3/8"-16 x 3/4" Bolts, 6-Pt., DHH
SGE8912A BB 396-502 V8, 3/8"-16 x 1" Bolts, 6-Pt., DHH, 16-Pcs. SGE8913A 5.0 Liter V8, (16) 3/8"-16 x 1" Bolts, 6-Pt., DHH
SGE8952 BB 396-454, 3/8"-16 x 1" 6-Pt., Stainless, 16-Pcs. SGE8953 SB 260-351, 3/8"-16 x 1" 6-Pt., Stainless, 16-Pcs.
DHH - Double Hex Head. * Will not fit 413 Chrysler. SGE8933 SB 260-351, 3/8"-16 x 1" 12-Pt., 16-Pcs.
SGE8932 BB 390-428 V8 Include 429-460, 3/8"-16 x 1" Bolts, 12-Pt., DHH, 16-Pcs

High-Flow Thermostats Stage 1 Water Pumps

Robertshaw balanced, high-flow Street rods need all the cooling they can
thermostats are modified by get, but most original equipment water
Stewart Components to function pumps leave something to be desired
more effectively in street rod/hot when it comes to cooling efficiency.
rod applications. Fits most GM and Starting with new stock castings,
Ford applications. Stewart component machines them to exacting standards, then
Part No. Description fits them with high-flow impellers and special seal assemblies.
STE300 160°F Balanced Thermostat Severe-duty Stage 1 pumps are equipped with 3/4" ball/roller
STE301 180°F Balanced Thermostat bearings.
STE302 195°F Balanced Thermostat Part No. Description
Small Block Chevy
STE12103 Pre-1969, Short, 5/8" Shaft
STE12203 Pre-1969, Short, (Severe-Duty), 3/4" Shaft
STE13103 1971-82 Corvette (Severe-Duty), 3/4" Shaft
STE13113 1969-86 SB Chevy and 1989-93 V6, Long Pump
Big Block Chevy
STE11104 Pre-1969 Short, Street Rod Special
STE11113 1969-86, Long Pump
STE11123 1987-Up, BB Chevy, Reverse Rotation, Long Pump

Sport Rotors
Stoptech Sport Rotors use a premium quality casting that’s machined with a proprietary “Vac-U-Slot”
pattern to evacuate heat and gases that build up between the brake pad and rotor. All rotors are coated
in a durable, mil-spec silver cadmium plating to protect against rust damage inside the cooling vanes.
Sold individually.
Call For Applications!

2023 - 2024 HOT ROD AND EARLY MUSCLE 477

Chambered Turbo Mufflers Trick Exhaust Hangers
Durable and effective, exhaust
hangers are laser cut from 1/8"
thick 304 stainless steel and include
high-temp silicone grommet for easy
installation. Clamp-on versions includes
stainless band clamp. Sold each.
Part No. Description
SWOTH2.5W 2-1/2" Exhaust Hanger, Weld-On
SWOTH3W 3" Exhaust Hanger, Weld-On
SWOTH902.5BC 2-1/2" Exhaust Hanger, Clamp-On
Constructed from TIG-welded 304 stainless steel with SWOTH903BC 3" Exhaust Hanger, Clamp-On
stainless wool packing, chambered turbo mufflers emit SWOUH2W 2" Universal Exhaust Hanger, Weld-On
a deep, civilized muscle car rumble at idle and cruising SWOUH2.2W 2-1/4" Universal Exhaust Hanger, Weld-On
SWOUH2.5W 2-1/2" Universal Exhaust Hanger, Weld-On
speeds, yet come to life once the throttle is opened.
SWOUH3.5W 3-1/2" Universal Exhaust Hanger, Weld-On
Mufflers will never blow out or change their tone. SWOUH3W 3" Universal Exhaust Hanger, Weld-On
Part No. Description SWOUH4W 4" Universal Exhaust Hanger, Weld-On
SWOTM5C3C3O 5" x 9" x 14" Shell, 3" Center Inlet/3" Offset Outlet
O2 Bung and Plug
High-Torque Accuseal Clamps Made from durable 303 stainless steel, bung
Durable Accuseal clamps work great and plug are required when installing O2
for I.D. or O.D. slip joints and are easily sensors. Sold each.
installed or removed for service work.
Part No. Description
Made from 300 series stainless strap SWOO2P Plug for O2 Bung, 18mm x 1.50 Male Thread, 3/4" Hex
material with zinc-plated 3/8" T-bolts and SWOO2SS Bung for O2 Sensor/Plug, 18mm x 1.50 Male Thread
a reaction block.
Part No. Description
SWOEBC250 2-1/2" I.D. 304 Stainless Steel Tubing
SWOEBC300 3" I.D.
Ideally suited to building headers
SWONBC175 1-3/4" I.D.
SWONBC188 1-7/8” I.D.
or other exhaust components,
SWONBC300 3" I.D. premium 304 stainless steel tubing
welds beautifully with 308 filler and
304 Stainless Steel Bends may be polished to a mirror-like finish.
Mil spec., certified and manufactured in the USA.
Ideally suited to building headers or other
exhaust components, premium 304 Part No. Description
SWO1.5SS-1 1-1/2" Dia. x .065" Wall x 1' Long
stainless steel tubing features wrinkle-
SWO1.6SS-2 1-5/8" Dia. x .065" Wall x 2' Long
free bends for unsurpassed flow. Mil spec., SWO1.7SS-4 1-3/4” Dia. x .065” Wall x 4 Long
certified and manufactured in the USA. SWO1.8SS-1 1-7/8” Dia. x .065” Wall x 1’ Long
Part No. Description SWO2SS-2 2" Dia. x .065" Wall x 2' Long
45° Bend SWO2SS-3 2" Dia. x .065" Wall x 3' Long
SWOMB45150 1-1/2" Dia. x .065" Wall with 6" Legs SWO2.2HSS-4 2-1/4” Dia. x .065” Wall x 4’ Long
SWOMB45175 1-3/4" Dia. x .065" Wall with 6" Legs SWO2.5HSS-1 2-1/2" Dia. x .065" Wall x 1' Long
SWOMB45200 2" Dia. x .065" Wall with 6" Legs SWO2.5HSS-3 2-1/2” Dia. x .065” Wall x 3” Long
SWOMB45225 2-1/4" Dia. x .049" Wall with 6" Legs SWO2.5HSS-4 2-1/2” Dia. x .065” Wall x 4” Long
SWOMB45225-H 2-1/4" Dia. x .065" Wall with 6" Legs SWO2.5SS-4 2-1/2" Dia. x .049" Wall x 4' Long
SWOMB45250 2-1/2" Dia. x .049" Wall with 6" Legs SWO3HSS-1 3" Dia. x .065" Wall x 1' Long
SWOMB45300 3" Dia. x .049" Wall with 6" Legs SWO3HSS-2 3" Dia. x .065" Wall x 2' Long
SWOMB45300-H 3" Dia. x .065" Wall with 6" Legs SWO3HSS-3 3" Dia. x .065" Wall x 3' Long
SWOMB45350 3-1/2" Dia. x .065" Wall with 6" Legs SWO3HHSS-4 3" Dia. x .089" Wall x 4' Long
90° Bend SWO3SS-3 3" Dia. x .049" Wall x 3' Long
SWOMB90175 1-3/4” Dia. x .065" Wall with 6" Legs SWO3HSS-3 3" Dia. x .065" Wall x 3' Long
SWOMB90200 2" Dia. x .065" Wall with 6" Legs SWO4SS-4 4” Dia. x .065” Wall x 4’ Long
SWOMB90250-H 2-1/2" Dia. x .065" Wall with 6" Legs
SWOMB90300 3" Dia. x .049" Wall with 6" Legs Flex Joints
SWOMB90300-H 3" Dia. x .065" Wall with 6" Legs
180° U Bend
Used to isolate vibration or thermal
SWOMB180200 2" Dia. x .065" Wall with 6" Legs expansion in the exhaust system,
SWOMB180300-H 3" Dia. x .065" Wall with 6" Legs flex joints feature formed ends, an
SWOMB180350 3-1/2" Dia. x .065" Wall with 6" Legs interlocked internal diameter, and all 304 stainless steel
180° J Bend construction.
SWOMBJ175 1-3/4” Dia. x .065” Wall with 6” & 15” Legs Part No. Description
SWOMBJ200 1-3/4” Dia. x .065” Wall with 6” & 15” Legs SWOAF2508BSS 2-1/2" Dia. x 8" Long
SWOMBJ237 2” Dia. x .065” Wall with 6” & 15” Legs SWOAF3006BSS 3" Dia. x 6" Long
SWOMBJ250 2-1/2” Dia. x .049” Wall with 6” & 15” Legs
SWOMBJ250-H 2-1/2” Dia. x .065” Wall with 6” & 15” Legs

478 2023 - 2024 HOT ROD AND EARLY MUSCLE

Exhaust Grommet V-Band Clamps
SWOEXGRO Offering extreme exhaust
Uses to isolate exhaust vibration sealing capabilities. Ideal
from mounting bolts when system is attached to hangers for high horsepower and
or frame, "Blue Snapper" high-temperature silicone turbocharged vehicles.
grommet has exceptional resistance to heat. Grommet is The stainless steel clamp
1-1/8" O.D. x 7/8" thick and is designed to fit around a strap is available separately or
with a 5/8" through-hole and use a 3/8" through-bolt. in a kit with two sealing
flanges.
Part No. Description
SWOVBC 2-1/2” Dia. Kit
SWOVBC3 3” Dia. Kit
Saddle Clamps SWOVBC35 3-1/2” Dia. Kit
A stainless steel exhaust clamp SWOVBC4 4” Dia. Kit
ideal for traditional exhaust SWOVBCO 2-1/2” Clamp Only
systems. SWOVBCO3 3” Clamp Only
SWOVBCO35 3-1/2” Clamp Only
Part No. Description
SWOVBF3 3” Sealing Flange Only
SWOSSC187 1-7/8” Dia.
SWOSSC225 2-1/4” Dia.
SWOSSC250 2-1/2” Dia.
SWOSSC300 3” Dia.

Universal Joints
Strong, precise, with no slop. Sweet’s lightweight, durable universal joints are ideal for use in
street rod steering systems.
Part No. Box/Column Shaft
SWE401-51919 3/4" DD 3/4" DD
SWE401-51920† 3/4" DD 1" DD
SWE401-50606 3/4" Smooth 3/4" Smooth
SWE401-50619 3/4" Smooth 3/4" DD
SWE401-50620† 3/4" Smooth 1" DD
SWE401-50612 3/4"-36-Spline 3/4" Smooth - Chevy Manual, Mustang II Power
SWE401-50615 3/4"-30-Spline 3/4" Smooth - New Chevy Power
SWE401-51219 3/4"-36-Spline 3/4" DD
SWE401-51220† 3/4"-36-Spline 1" DD
SWE401-51519 3/4"-30-Spline 3/4" DD
SWE401-50611 13/16"-36-Spline 3/4" Smooth - Chevy Power Box
SWE401-50613 9/16"-26-Spline 3/4" Smooth - Mustang II Manual
SWE401-50614 5/8"-36-Spline 3/4" Smooth - Vega
SWE401-51419 5/8"-36-Spline 3/4" DD
SWE401-50617 Corvette Spline 17mm DD 3/4" Smooth
SWE401-50618 1"-48-spline 3/4" Smooth
† 1" “DD” configurations are offered in two different sizes. OEM is actually slightly smaller than 1", while the aftermarket style is slightly larger than 1".

Chrome Universal Joints Steering Couplers

SWE401-61919 Straight couplers connect
Like Sweet's unplated steering steering shafts.
universal joints, the new chrome Part No. Description
units are strong and precise with no “slop”. Compact, SWE301-30110 Chevy Power Splined (13/16"-36)
SWE301-30120 Pinto Power Splined (3/4"-36)
light, and durable, standard universal joints are capable
SWE301-30130 Pinto Manual Splined (9/16"-26)
of 32° of working angle. SWE301-30140 Chevy Vega (5/8"-38)
Box/Column Shaft SWE301-30150 New Chevy Power Splined (3/4"-30)
3/4" DD 3/4" DD

2023 - 2024 HOT ROD AND EARLY MUSCLE 479

Diffuser Type Mufflers
Supertrapp Glasspack Series Mufflers are available in plain and stainless steel. Their
sound level can actually be adjusted by adding or subtracting diffuser discs to create
a distinctive sound for every vehicle.

Stainless Steel Glasspack Series Mufflers 2-1/2" Stainless Steel

Model 445 Short – 4"
Diffuser Discs T-Bolt Style Clamp
Length: 17”, diameter: SPR094-2500
4”, weight: 4 pounds
Part No. Size
SPR443-2017 2" Inlet, 2" Core
SPR443-2517 2-1/2 Inlet, 2-1/2" Core

Convoluted Tubing
Excellent for covering wiring bundles.
Spark Plug Tubing is slit down one side, allowing wire
Boot Protectors bundles to be inserted.
TAY2524 1/4" I.D. 3/8" I.D.
Heat-treated fiberglass sleeves Color 10 Ft. 25 Ft. 50 Ft. 10 Ft. 25 Ft. 50 Ft.
Black TAY38090 TAY38092 TAY38094 TAY38180 TAY38100 TAY38110
withstand temperatures up to 1200°F and are 6" long. Sold
Red TAY38190 — — — TAY38200 —
in sets of eight. Blue — — TAY38262 TAY38360 TAY38361 —
Yellow — — — — TAY38103 —
Polished Spark Plug Boot Purple — — — — TAY38831 —

Heat Shield Protectors

1/2" I.D. 3/4" I.D.
TAY2570 Color 10 Ft. 25 Ft. 50 Ft. 10 Ft. 25 Ft. 50 Ft.
For 90° boots. One pair. Black TAY38580 TAY38500 TAY38510 TAY38780 — TAY38710
Red — TAY38600 — — — —
Blue TAY38560 — — — TAY38761 —
ShoTuff® Chrome Convoluted Tubing Yellow — — — TAY38781 — —
Purchase individually in 41" lengths, or in pre-packaged
Purple — TAY38841 — — — —
assortments that include 41" each of 1/4",
3/8", 1/2", and 3/4" lengths.
Convoluted Tubing
Part No. Description
TAY39000 Pre-Packaged Assortment Assortments
TAY39001 1/4” I.D. (9mm) x 41” Long Each assortment contains
TAY39002 3/8” I.D. (10mm) x 41” Long 10 feet of the following ID
TAY39003 1/2” I.D. (13mm) x 41” Long sizes: 1/4", 3/8", 1/2", and
TAY39004 3/4” I.D. (19mm) x 41” Long 3/4".
Part No. Description
TAY38000 Black
TAY38001 Purple
“Seal-4-Good” Gaskets TAY38002 Red
Collector gaskets are referred to
as the “best on the market” by
many users. Percy's “dead soft”
aluminum seals far better than
competitive copper gaskets. Available
in 2-1/2", 3", and 3-1⁄2".
Part No. Description
PEP66001 Seal-4-Good Gasket, 2-1/2"
PEP66002 Seal-4-Good Gasket, 3"
PEP66003 Seal-4-Good Gasket, 3-1/2"

480 2023 - 2024 HOT ROD AND EARLY MUSCLE

Spiro-Pro Spark Plug Wires Single Trunk-Mounted Battery Kit
Spiro-Pro plug wire sets provide maximum firepower
without radio interference, making them a must for rods TAY48000
with electronic ignition systems and/or computers. Includes pre-terminated
ends, 16 feet of 2-gauge, high-
performance, 100% solid copper
8mm Spiro-Pro cable and 3/8" J-bolt hold-
Universal Wire Sets - 8 Cylinder downs.

Color 90° 135° 180° 180° Aluminum Battery Box

Boot Boot Boot Hemi Battery box, made of .040"
Black TAY73051 TAY73053 TAY73055 TAY75089
aluminum, is required by
Red TAY73251 TAY73253 TAY73255 —
Blue TAY73651 TAY73653 TAY73655 —
NHRA/IHRA when there is no
firewall between the driver
compartment and the battery.
Colored Wire Separators Box fits most battery sizes and
Tough nylon separators can withstand meets SFI 8.1 specs. Complete
temperatures up to 400°F and will fit 7mm and with hold-down, 3/8" hold-
8mm plug wires. down bolts and hardware.
Part No. Description
Part No. Description
TAY42800 Black Separators
TAY48100 Battery Box
TAY42820 Red Separators
TAY48101 Battery Box, with 16' of 2-Gauge Cable Kit
TAY42860 Blue Separators

Diamondback Shielded Battery Cables

Clamp-Style Wire Separators Heavy-duty 4-gauge cable has
Separate, organize, and support ignition SAEJ1127 type SXL insulation and
wires for a neat, professional look. Molded solid brass battery terminals and solid
from non-conductive type 6/6 nylon, brass terminals. Up to three times
separators will not melt, mar, distort, more conductive than lead and the
crack, or fade. Available for 7-8mm wires. braided alloy shielding resists high
Choice of three colors. Each kit contains two 4-wire temperatures and abrasion.
separators, two 3-wire separators, and two 2-wire
separators. Top Post Part Length
No.
Black Red Blue TAY20012 12"
TAY42700 TAY42720 TAY42760 TAY20024 24"
TAY20034 34"
Mounting Brackets TAY20038 38"
TAY20041 41"
for Clamp-Style Wire “Horizontal”
Separators Split-Lock Header Bolts
Clamps are used to attach Unique header bolts will not back out.
wire separators to valve The Split Lock™ friction lock fastener
covers and will fit 7-8mm uses a locking set pin built into the bolt.
and “409” clamp-style wire “Vertical” When tightened, the set pin expands
separators. the bolt threads against the thread
Black Blue Description wall, providing an unmatched lock. The
“Horizontal” Split Lock™ friction lock fastener is the only fastener that
TAY42701 TAY42761 Small Block Chevy and Most Mopar, 4-Pack provides a locking system without using wires, locking
TAY42702 — Big Block Chevy and Most Ford, 6-Pack compounds, lock washers, or complicated interrupters.
“Vertical”
Part No. Description Qty.
TAY42705 TAY42765 Small Block Chevy and Most Mopar, 4-Pack
Black Oxide Finish
TAY42706 — Big Block Chevy and Most Ford, 6-Pack
SB GM/GM 2.8 V6/BB Mopar, AMC V8, 3/8" x 1",
TAY310007 12
12-Point Head
Professional Wire Crimp Tool TAY310068
GM Gen III LSX/Ford 4.0 V6, 8mm x 25mm,
12
Crimper is adjustable and has a 12-Point Head
hardened steel frame to resist Stainless Steel
“deflection” common in many SB GM/GM 2.8 V6/BB Mopar/AMC V8, 3/8" x 1",
TAY310000 12
12-Point Head
similar tools, assuring user of
TAY310001 BB GM/SB and BB Ford, 3/8" x 1", 12-Point Head 16
factory-quality crimps every time. Optional dies are
available separately to use with crimping jaws. Handles
have red molded cushion grips.
Part No. Description
TAY43400 Crimp Tool
TAY43401 Die: 10-22 Gauge Insulated Wire
TAY43402 Die: 10-22 Gauge Non-Insulated Wire

2023 - 2024 HOT ROD AND EARLY MUSCLE 481

Seal-4-Good and XX Carbon Exhaust Header Gaskets
Percy's exhaust header gaskets feature innovative materials designed to put an end to performance-inhibiting exhaust
leaks. Seal-4-Good gaskets are made from "dead soft" aluminum, and will not blow out or burn out.
Seal-4-Good Part Seal-4-Good Part
Description No. Description No.
SB Chevy 265-400, Round 1.5" Port PEP66011 SB Ford 221-302, Rect. 1.625" x 1.25" PEP66014
SB Chevy 265-400, Square 1.5" PEP66012 SB Ford 221-302, Oval 1.5" x 1.125" PEP66018
SB Chevy 350 LT1, D-Port 1.375" PEP66031 Ford 4.6/5.4L 2-Valve, Round 1.625" PEP66033
SB Chevy 5.7L LS1, Round 1.625" PEP66032 Ford 4.6 4-Valve, Oval 1.125" x 2.125" PEP66034
BB Chevy 396-502, Square 2.125" PEP66013 Ford 351C 2bbl, 351M-400 PEP66051
BB Chevy 396-502, Round 1.875" PEP66019 Ford 351C 4bbl, 302 Boss PEP66052
SB Chrysler 273-360, Rect. 1" x 1.625" PEP66037 BB Ford "FE" 352-390 PEP66053
BB Chrysler 383-440, Square 1.5" x 1.8" PEP66036 BB Ford 429-460, Oval 1.25" x 2.125" PEP66035
BB Ford 429-460 Cobra Jet PEP66054

Ten Factory by Motive Gear

Ten Factory’s experienced drivetrain team designs and engineers
products that meet strict quality and strength criteria to provide high
value. Ten Factory’s name comes from their ten-year replacement
warranty on axle shafts.

Rear Axle Kits Replacement Axles

High-manganese 1541H or 4140 chrome moly axles are a bolt- Replacement rear axle shafts are sold individually for
in performance upgrade and include axle bearings, seals, those that just want to replace a broken or worn-out
and wheel studs. Ford has 1/2" press in studs, GM shaft or shafts. These are the same tough material,
accepts 7/16" and 1/2" studs. forged and heat treated like the rear axle kits, but without
Spline, the black oxide coating. These also feature the exclusive
Part No. Description Bolt Circle TEN-year replacement warranty in the unlikely instance
Ford 8.8 of an axle failure. GM applications have 7/16" studs unless
1979-93 Mustang 5-Lug Upgrade 28, 5-4.5" noted.
TENMG22180
1979-93 Mustang 5-Lug, Big Spline 31, 5-4.5"
TENMG22183 1979-93 Mustang, 4-Lug, Big Spline 28, 4-4.5" Spline,
Part No. Description Bolt Circle
GM 8.2"/8.5" 10-bolt GM 8.2"/8.5" 10-bolt
TENMG22100 1965-67 Chevelle, 1970-75 Nova 28, 5-4.75 TENMG27122 1968-72 Chevelle, 1970-81 Camaro LH/RH 28, 5-4.75"
TENMG22101 1968-72 Chevelle, El Camino, 1970-81 Camaro 28, 5-4.75"
TENMG22102 1973-77 Chevelle, El Camino 28, 5-4.75
GM 8.875" 12-bolt
TENMG22109 1968-72 Chevelle, El Camino, 1970-72 Camaro 30, 5-4.75"
1965-67 Chevelle, 1967-69 Camaro,
TENMG22110 30, 5-4.75"
1968-72 Nova

Sizzler Series Transmissions

The perfect automatic transmission for a hot rod with up to 300 horsepower.
Rebuilt with a shift improver kit, upgraded band(s) and clutches, improved lubrication
system, and a chrome pan.
Part No. Description
TCI371038 Chevy TH-700-R4, 1984-93 30-Spline

482 2023 - 2024 HOT ROD AND EARLY MUSCLE

 10" Street Fighter Series
StreetFighter Transmission Radically prepped hot rods that spend
Many rods today have equal time on the street or strip can take
more horses under the advantage of the Streetfighter's 1,500 RPM increase in
hood and need a stouter stall speed for higher RPM launches and lower elapsed
transmission. The times. Furnace-brazed fins, needle bearings, hardened
StreetFighter will handle pump hub, and computer balancing are standard
up to 450 horsepower and has a manual/automatic valve features.
body, high-performance clutches and band(s), increased
Note: Flexplate must be drilled to accept 7/16" bolts.
fluid flow, thrust capacity, and improved lubrication.
Part No. Description
Part No. Description
TCI441300 Ford C6, 1971-91 With 1.375" Crank Pilot, 289/302/351/400/429
TCI311000 Chevy TH-350 with 6" Tailshaft
TCI243105 GM TH-700-R4, 1984-91, 30-Spline, 1.703" Pilot
TCI211000 Chevy TH-400 with 4" Tailshaft
GM-TH-350/400, 1965-91,
TCI241000
With Dual Bolt Pattern And 168-Tooth Flexplate Only
Transmission Controller GM EZ-TCU
TCI302820 Aluminum Deep
For computer- Transmission Pan
controlled Cool the transmission and add
transmissions strength to the case at the same
the TCI EZ-TCU time with a finned, cast aluminum
requires no laptop, pan that includes a drain plug, pickup
no software to extension where needed, pan gasket,
install, and tuning experience to operate. Just connect and necessary fasteners, with 6" tailshaft.
the EZ-TCU and answer a few questions —the EZ-TCU
Part No. Description
does it all. Controller is compatible with the most TCI518000 Ford C4, Dipstick In Case Only, 1 Extra Quart
popular GM transmissions including 4L60E, 4L65E, TCI228000 Turbo-Hydramatic 400, 2 Extra Quarts
4L70E, 4L80E, and 4L85E, and the TCI 6x six-speed TCI328000 Turbo-Hydramatic 350, 2 Extra Quarts
transmission. Adjustments can be made to shift points, TCI378000 Turbo-Hydramatic 700-R4/4L60E, 2 Extra Quarts
shift firmness, and shift speed. The complete kit includes
the transmission control unit, hand-held tuner, and wiring Universal Transmission Cooler
harness.
TCI820500
Efficient cooler is small
12" Saturday Night enough to be installed
Special Series on most hot rods to keep
A great choice for show cars and street transmission within safe
rods. Adds about 400-500 RPM to stall operating temperature
speed, just enough to soften the “shock” to range. Hose, clamps, and
the drivetrain (and driver) in a high-power mounts included.
lightweight hot rod. Replacement Mounting Kit
Part No. Description TCI821500
TCI141500 Chrysler Torqueflite 727, 1967-81 Non Lock-Up, 24-Spline
TCI450700
Ford C4 1970-82, Steel Transmission Crossmembers
10.5" Bolt Circle, 26-Spline (Dipstick In Case)
TCI241500-A GM TH-350 1969-81, Small Bolt Pattern

11" Breakaway Series

An ideal converter for daily driven hot
rods that have been slightly modified and
might even see limited drag strip action.
With 2,400-2,600 RPM flash stall (1,000 Rugged, steel crossmembers utilize a three-axis modular
above stock), it's streetable and improves and adjustable design that provides a perfect fit across a
low-end power for quicker acceleration and variety of applications. Crossmembers feature the OEM
harder launches. bolt pattern for easy installation and include a powder-
Part No. Description coated finish for corrosion resistance.
TCI141200 Chrysler Torqueflite 727 1967-81, Non Lock-Up, 24-Spline
Part No. Description
Ford C6 1971-91 with 1.375" Crank Pilot,
TCI441000 TCI953001 1970-74 GM F-Body, All Transmissions
289/302/351/400/429/460
TCI953005 1967-69 GM F-Body/1968-72 X-Body, All Transmissions
Ford C6 1966-84 with 1.850" Crank Pilot,
TCI441100
352/360/390/406/427/428
Ford C4 1970-Up, 10.5" Bolt Circle,
TCI451100
26-Spline (Dipstick In Case)
TCI242800 GM TH-700-R4, 1984-91, 30-Spline, 1.703" Pilot
GM TH-350/400, 1965-91 with Dual Bolt Pattern
TCI240900
and 168-Tooth Flexplate Only

2023 - 2024 HOT ROD AND EARLY MUSCLE 483

Coated Engine Swivel Water Neck
Accessories TRA6003
Trans-Dapt’s Asphalt Swivel water neck with 45° angle fits small
Black accessories have block Chevy.
a smart looking, black
powder-coat finish that
looks great and is extra durable.
Part No. Description Small Block Chevy
Chevy Oil Pans (4-qt. Capacity, Includes Drain Plug)
Chevy O-Ring Style Water Necks Chrome-Plated Short
TRA8633 Early Model Small Block/Big Block Chevy Steel Valve Covers
TRA8634 Late Model Small Block/Big Block Chevy
TRA8635 Late Model Small Block/Big Block Chevy with 1/2" NPT Port TRA9702
TRA9243 Replacement O-Ring Internally baffled covers
Chevy Timing Covers are standard height and
TRA8638 2-Piece Timing Cover Small Block Chevy 283-400 fit 1987-99 engines with
Steel Valve Cover Breathers centerbolt-style heads.
TRA8643 Twist-In Style, 2-3/4" Dia. Bolts not included.
Push-In Style, (Mopar Style) with 5/8" Vacuum Tube,
TRA8642
1-1/4" Hole, 2-3/4" Dia.
TRA8645 PCV Breather (Ford Style), 1-1/4" Hole, 2-3/4" Dia.

Orange Powder-Coated Ford Blue Valve Covers

Engine Accessories TRA8344
Tired of polishing chrome? Want a factory look? Stamped steel, blue
TransDapt has powder-coated engine accessories for powder-coated valve covers
Chevy engines, available in Chevy orange. are baffled and have provisions
for breathers and/or PCV
valves. Fits 260-289-302W &
5.0L. Sold in pairs.
Valve Covers
Part No. Description
Small Block Chevy
TRA9916
1958-86 Short Baffled
O-Ring Style Water Neck
TRA8340
O-ring style water neck features a 45° angle and and
Timing Covers O-ring for a tight, leak-proof seal. Ford blue powder-
Part No. Description coated finish. For 1965-75 Ford 260, 289, 302, 351W.
TRA9915 Small Block Chevy, Except LT1
TRA9914 Big Block Chevy
TRA9923 2-Piece, Small Block Timing Cover

Water Necks
Part No. Description
TRA9929 Chevy Late Small Block and Big Block

Oil Pan
TRA9921
Pans are an exact copy of the
original factory oil pan, powder
coated in Chevy orange and ideal
for restoration of 1965-90 396-
454 Chevy-powered vehicles. 4
quarts.

484 2023 - 2024 HOT ROD AND EARLY MUSCLE

Aluminum Valve Cover Mini Tabs
Transmission Pans TRA8896
TRA9067
Part No. Description Designed for use in corners and tight
TRA8896
TH350 Trans Pan clearance locations to insure better
with Drain Plug, Polished valve cover sealing and prevention of
TH400 Trans Pan deformed covers. 1-1/2” wide. Chrome-
TRA8897
with Drain Plug, Polished
plated steel.
Chrome
Breathers and Caps
Air Cleaner Assemblies
Traditional chrome air cleaner assembly
includes base, paper filter element, and Push-In Breathers
cover. Chrome-plated push-in breathers for
Part No. Description steel valve covers with 1-1/4” diameter
TRA2293
Vintage 1955-57 Corvette Style holes. Requires grommet TRA4878.
Air Cleaner 14" x 3", Fits 4 Barrel Carb Internal baffle and filter element prevents
oil seepage.
Part No. Description
TRA4870 Breather Only
TRA4871 Breather with Grommet

T-Bar Wing Nuts Push-in PCV Breather

TRA4936 TRA9171
Wing nuts are 5-3/8" tall chrome, Replaces the PCV valve in the valve cover.
1/4"-20 x 1" threads, four per pack. The 3/4" breather neck also fits in 1-1/4"
diameter valve cover openings when used
with grommet TRA4998. Includes an internal oil baffle
and poly filter element. Outside diameter is 2-3/4".

Mopar Style Breather

Valve Cover
TRA9169
Spreader Bars Chromed-plated push-in breather/
Bars are chrome-plated steel and separator for steel valve covers with 1-1/4"
spread out pressure evenly for a leak- diameter holes. Use grommet TRA4878.
proof fit. Breather tube is 5/8" diameter.
Part No. Description
TRA4993 Small Block Chevy, 4-1/2” Wide, Set of Four
TRA9640 Big Block Chevy, Set of Seven
Breather Grommets
Necessary for breather installation. Must cut
Small Block Chevy bottom off of TRA4878 to make it functional.
1987-Up Valve Cover Bolts Part No. Description
TRA9812 TRA4878 1” I.D., 1-1/4” O.D. (Breather)
TRA4998 3/4” I.D., 1-1/4” O.D. (PCV Type)
Fit TRA9702 and 1987-up Chevy
V8 and 4.3L V6 stock center bolt
steel valve covers. Not for alloy
covers. Chrome-plated set of Engine Dipsticks
eight. Chrome-plated dipstick and tube included
in each kit.
Part No. Description
TRA4957 1965-78 Chevy 283-350
TRA9420 1979-82 Chevy 305-350,
TRA9231 1982-85 Chevy Camaro/Firebird 305-350
TRA4958 1990-Earlier Chevy 396-454
TRA9224 Chrysler 318-340-360
TRA9225 Chrysler 383-440
TRA9221 Ford 260-289-302
TRA9222 Ford 351 Windsor
TRA9404 Olds 350-455 and 403 Pontiac Trans-Am
TRA9405 1965-79 Pontiac V8, Except 389

2023 - 2024 HOT ROD AND EARLY MUSCLE 485

Transmission Dipsticks Chrome and Satin Black
Chrome-plated stick and tube. Due to the wide and Factory-Style Alternator
varied applications, bracket modifications may be
necessary.
Brackets TRA9317
Chrome Satin Black
Part No. Description Description
Part No. Part No.
TRA4994 GM TH350, 34" Long Small Block Chevy 305-350
TRA4995 GM TH400, 24" Long 1969-75, LWP,
TRA9421 Chevy TH350, 27" Long TRA9316 —
Top Bracket Bolts To Water Neck, Bracket Set
1976-86, LWP,
Chrome Water Necks TRA9317 TRA8517 Top Bracket Bolts to Intake Manifold,
Bracket Set
O-Ring Gasket Big Block Chevy 396-454
Description
Style Style
TRA9228 — Chevy Early V8 TRA9581 TRA8581 1965-68, SWP, Top Bracket
TRA9229 — Chevy Late V8 TRA9502 — 1965-68 SWP Bottom Bracket
Chevy/GM Late V8 TRA9318 TRA8518 1969-Up, LWP, Top Bracket
TRA9468 — TRA9638 TRA8538 1969-Up, LWP, Bottom Bracket
with 1/2" NPT
Chevy Note: SWP = Short Water Pump. LWP = Long Water Pump.
TRA9647 —
“Straight Up” Design
— TRA4987 Chrysler, All V8
Ford 260-351W,
TRA9228 OEM-Style Powder-Coated
TRA9440 —
1965-75 Steel Pulleys for Chevy V8
Ford 429-460 Trans-Dapt has chosen the most popular
TRA9415 —
with 3/8" NPT
diameter Chevrolet pulleys and applied
Olds 330-455,
— TRA9403
Some AMC
a beautiful satin black powder-coated
finish. In some instances, the stock
accessories may not run at the exact TRA8601
TRA9229 speed as originally designed.
Pump
Part No. Description Diameter
Style
Low-Mount 1955-68 Small Block Chevy
Alternator Bracket TRA8600 Water Pump, 1 Groove SWP 7.1"
TRA8601 Water Pump, 2 Groove SWP 6.4"
TRA9758 TRA8602 Crankshaft, 1 Groove SWP 6.8"
For 1955-68 Chevy 283-350 TRA8603 Crankshaft, 2 Groove SWP 7.3"
engines. Short water pump, 1969-85 Small Block Chevy
low-mount alternator arm for TRA8604 Water Pump, 1 Groove LWP 6.3"
left side (1-piece). 1965-68 Big Block Chevy
TRA8615 Water Pump, 2 Groove SWP 6.3"
TRA8616 Crankshaft, 2 Groove SWP 7.6"
Chrome Alternator Brackets TRA8623 Water Pump, 2 Groove LWP 6.3"
Part No. Description TRA8624 Crankshaft, 3 Groove LWP 7.8"
TRA9457 Chrysler 383-440 Bracket Set
TRA9455 Ford 289-351W Bracket Set
Chrome Pulleys
1969-86 Chevy 305-350, LWP, Bottom
TRA9637
Bracket Pump
Part No. Description Diameter
TRA9457 Style
283-350 Small Block Chevy
Chrome Custom TRA9600 Water Pump, Single Groove SWP 7.1"
Alternator Brackets TRA9601 Water Pump, Double Groove SWP 6.4"
TRA9603 Crankshaft, Double Groove SWP 7.3"
Part No. Description
TRA9604 Water Pump, Single Groove LWP 6.3"
Universal Alternator/Generator Arm,
TRA9605 Water Pump, Double Groove LWP 6.3"
TRA9079 1" Wide, 14" Long
with 4" Adjusting Slot TRA9607 Crankshaft, Double Groove LWP 6.9"
1976-86 Chevy 305-350, 396-454 Big Block Chevy
TRA9321 TRA9815 Water Pump, Double Groove SWP 6.3"
LWP, Top Bracket
TRA9321 TRA9816 Crankshaft, Double Grove SWP 7.6"
TRA9723 Water Pump, Double Groove LWP 6.3"

TRA9600 TRA9815

486 2023 - 2024 HOT ROD AND EARLY MUSCLE

Aluminum Pulleys Fuel Filters
Manufactured from 356 alloy. Water pump
pulleys include bolts.
Pump Diameter
Part No. Description Style TRA9479 TRA9245 TRA9177
283-350 Small Block Chevy
TRA9478 Water Pump, Single Groove SWP 5.6" Clear/chrome filter has a replaceable element. Chrome
TRA9479 Water Pump, Double Groove SWP 6.6" filter is disposable.
TRA9480 Crankshaft, Single Groove SWP 6.6"
TRA9481 Crankshaft, Double Groove SWP 6.6" Part No. Description
TRA9177 Chrome Fuel Filter, 3/8" Inlet/Outlet
TRA9482 Water Pump, Single Groove LWP 6.6"
TRA9245 Clear/Chrome Fuel Filter, 3/8" Inlet/Outlet
TRA9483 Water Pump, Double Groove LWP 6.6"
TRA9484 Crankshaft, Single Groove LWP 6.6"
TRA9485 Crankshaft, Double Groove LWP 6.6"
TRA9486 Crankshaft, Triple Groove LWP 6.6" Fuel Pump Block-Off Plates
Chrome-plated steel fuel pump block-off plates
Ignition Accessories cover the stock fuel pump openings. Gasket
Coil Accessories included. Small and big block Chevy V8.
Chrome-plated dress-up accessories Part No. Description
TRA2057 283-400 Small Block Chevy
fit most cylindrical automotive coils.
396-454 Big Block Chevy, V6’s and Others
Easy bolt-on installation. TRA2058
with 1-3/4” Centers
Part No. Description
TRA9366 Chrome Coil Holder, GM-Type Stand-up TRA9648 Fuel Pump Mounting Plate
TRA9648 Chrome Coil Bracket Only
TRA2310
Pro-Style Spark Plug Improve the looks of the fuel pump on small
block Chevys with a chrome mounting plate.
Wire Separators Complete with gasket.
TRA9576
Durable heat-resistant plastic. For Carburetor Linkage Plate
7 or 8.5mm wires. Each set includes Prevent accelerator cable
two 2-hole, two 3-hole, and two binding and linkage hassles TRA2333
4-hole separators. Chrome-plated with a chromed steel carburetor
finish. linkage plate for Holley
carburetors. Small bracket for
Air Cleaner and Fuel System Accessories GM cable is included. TRA2334
Air Cleaner Risers bracket for Morse cable is
Raises air cleaner base where available separately.
throttle linkage clearance is a Part No. Description
concern. Fits all carburetors with TRA2333 Holley And AFB Carb Linkage Plate TRA2334
TRA2334 Morse Cable Bracket For Carb Linkage Plate
5-1/8” diameter neck.
Part No. Description
TRA2378 1/2" Tall
TRA2379 1" Tall Carb Mounted
TRA2326 1-1/2" Tall Linkage Brackets
TRA2380 2" Tall Precisely stamped, chrome-plated brackets
attach to carburetor and secure the throttle
Holley Chrome linkage. Brackets are available to accept GM
Fuel Lines throttle and transmission kickdown cables. TRA9619
Tubes are bent on Part No. Description
a single plane for TRA9619 Carb Linkage Bracket
precise fit to the carb. The 3/8" diameter tubing provides TRA9620 Carb Linkage Bracket for Auto Trans. Applications
excellent fuel flow. Drilled and tapped with 1/8"NPT
threads (plug included) for fuel pressure gauge.
Part No. Description
Throttle Return Spring Bracket
TRA2197 Holley Quad, 9-5/16" Centers TRA2291
TRA2198 Holley Quad Model 3310, 8-21/32" Centers
Chrome-plated carb spring bracket is a
convenient way to hook up the throttle return
spring.

2023 - 2024 HOT ROD AND EARLY MUSCLE 487

Carb Mount Throttle Return Kit 4-Barrel Carburetor
TRA2083 Tapered Port Adapter
Throttle return spring TRA2064
kit mounts directly to Large and medium-base
the carburetor. Fits 1-11/16" port Holley or AFB
Holley 2300 and 2305 4-barrel carburetor to
series 2bbl carbs or 4150 smaller base 1-7/16" port 4bbl
and 4160 4bbl. carbs on manifolds.
any engine. Bracket is
chrome plated and both
heavy and light spring sets are included. 2-Barrel Carburetor
to Quadrajet Manifold
Chrome Engine Accessories TRA2087
Adapts any Holley
and Rochester 2bbl
carburetor (except
TRA9514 TRA9515 Varajet & Dualjet) to
Part No. Description Quadrajet manifold
TRA9514 Chrome 1/2" NPT Water Pump Fitting for 3/4" Hose base.
TRA9515 Chrome 1/2" NPT Intake Manifold Fitting for 5/8" Hose
Large 2-Barrel Carburetor
Plastic “Carb Hat” To Small 2-Barrel Manifold
Carburetor Cover
TRA2086
TRA2012 Adapts the large
Keep dirt and contaminants 350-500 CFM Holley
out of carburetors during 2bbl. carburetor to
storage and down time. Fits any Rochester 4-bolt
carbs with 5-1/8" necks. manifold base.

Holley 4-Barrel to
Q-Jet Manifold
TRA2034
Carburetor Adapters Mounts Holley, AFB 4bbl
carburetors to Quadrajet
Holley 4-Barrel Carb to manifold. Cast aluminum and
Quadrajet Manifold ported for PCV.
TRA2066
Holley carburetor Carburetor Spacers
to Quadrajet Precision-cast aluminum
manifold. The spacers fit both Holley and
finest quality die AFB carburetors except
cast aluminum. TRA3213 (Quadrajet).
Open plenum Part No. Description
for maximum TRA2081 2" Holley/AFB Spacer, Open
efficiency. TRA2084 1" Holley/AFB Spacer, Open TRA2081
1" Holley/AFB Spacer,
TRA2103
with PCV Fitting, Open

4-Barrel Carburetor Carburetor Stud Kits

to 2-Barrel Manifold Includes (4) studs, (4) nuts, and
Adapts 4bbl carburetor (4) washers. Threads are 5/16"
to 4-bolt 2bbl manifold. fine on one end and 5/16" coarse
on the other.
Part No. Description
Part No. Description TRA2046 1-3/8" Carb. Stud Kit, (4) 5/16" Coarse and Fine Threads
Holley/AFB 4bbl to Holley 2bbl, TRA2047 2" Carb. Stud Kit, (4) 5/16" Coarse and Fine Threads
TRA2065
Cast Aluminum TRA2106 3" Carb. Stud Kit, (4) 5/16" Coarse and Fine Threads
Holley/AFB 4bbl to Holley 2bbl,
TRA3223
Billet Aluminum

488 2023 - 2024 HOT ROD AND EARLY MUSCLE

Remote Oil Filter Adapters and Accessories Engine Tilter
Spin-On Oil Filter Adapters TRA9099
Convert 1956-67 Chevrolet Unique tool will save time and
(except Chevy II) V8 engines make it easier to position an
with canister-style oil filter engine into a chassis. Tilter weighs
to a spin-on oil filter. only 14 pounds but is rated at 1200 pounds, making it safe
TRA1024 to use with most engines. Engine Tilter is to be used with
Part No. Description
TRA1024 3/4"-16 Nipple, Accepts Fram PH-8A or HP1, Ford Filters
an engine hoist and includes the attaching link and four
13/16"-16 Nipple, Accepts Fram PH-30 (Chevy Filters),
20" chains.
TRA1059
Requires the Use of the OEM By-Pass Valve
Engine Swap Mounts
Spin-On Oil Filter LS-Based Swap-in-
Bypass Adapters a-Box Kits
Spin-on oil filter bypass adapters install Make your LS swap go
in place of the stock oil filter and accept smoother with less
lines for remote mounting of filter. Inlet trial-and-error by using
and outlet are 1/2"NPT. aftermarket components
Part No. Description that work together
Ford V8, V6, L6, Chrysler V8, Slant 6, Engine swap in a box
TRA1013
Imports 3/4"-16 Threads, 2-1/2" I.D. and 2-3/4" O.D. O-Ring
kits do just that. Each of
SB/BB Chevy V8, 13/16"-16 Threads,
TRA1022
3-3/16" I.D. and 3-7/16" O.D. O-Ring the member companies
of the Hedman Performance Group is an engine swap
90° Oil Filter Bypass Adapter specialist in their product field. Now, Hedman, Trans-
Dapt, and Hamburger's Performance have combined R&D
TRA1413 forces to create their "Engine Swap-in-a-Box" kits. Each
90° inlet and outlet oil bypass adapter kit comes complete with a special engine swap oil pan
works in really tight confines at the block and pickup, a full set of engine swap mounts and pads,
when adding a remote filter system or a complete set of engine swap headers with gaskets
engine oil cooler. Inlet and outlet are 1/2" and mounting hardware, and select kits also include a
NPT. Fits Ford V8, V6, L6, Chrysler V8 and Slant 6. 3/4"-16 transmission crossmember and mount pad.
threads. Measurements are 2-1/2" I.D. and 2-3/4" O.D. with Header Finish
an O-ring. Black
Maxx
HTC Silver Black Tube
Remote Oil Filter Brackets TRA1028 Application Trans. Uncoated Ceramic Ceramic Dia.
Cast aluminum. Inlet and outlet are Mild Steel Headers
1/2"NPT. Brackets accept a single Fram 1967-69 GM F-Body Automatic TRA42011 TRA42012 — 1-3/4”
(Camaro, Firebird)
PH8A oil filter. 1968-74 GM X-Body Manual — TRA42015 — 1-3/4”
Part No. Description (Nova, Ventura)
TRA1028 Vertical Inlet and Outlet 1970-74 GM F-Body
Manual TRA42024 — — 1-3/4”
TRA1045 Horizontal Inlets and Outlets (Camaro, Firebird)
1975-81 GM F-Body
Automatic TRA42031 — — 1-3/4”
Oil Filter Relocation Kits (Camaro, Firebird)
1964-67 GM A-Body
Each TD Performance (Chevelle, Malibu, El
Manual/
TRA42921 TRA42022 — 1-1/2”
Oil Filter Relocation Kit Automatic
Camino)
includes an oil filter 1978-88 GM A/G-
bypass adapter, a Body (Monte Carlo, Manual/
TRA48061 TRA48062 TRA48063 1-3/4”
remote oil filter bracket El Camino, Cutlass, Automatic
TRA1122 Regal, Grand Prix)
with 1/2"NPT threads
1967-72 2WD Chevy/
inlet and outlet, two GMC C10/C15 Trucks
Manual/
TRA42041 TRA42042 — 1-3/4”
fully assembled 30" neoprene hoses with Automatic
and SUVs
fittings, mounting hardware, and instructions. All 1973-91 Chevy/GMC
Manual/
relocation kit remote filter brackets accept single 3/4"-16 C10/C15 Trucks and
Automatic
TRA42051 — — 1-3/4”
spin-on filters such as Fram PH8A or HP1. SUVs
1982-04 Chevy/GMC
Part No. Description Manual/
S10/S15 Trucks and TRA42161 TRA42162 — 1-1/2”
Ford V8, V6, L6, Chrysler V8, Slant 6, Automatic
TRA1113 SUVs
Imports 3/4"-16 Threads, 2-1/2" I.D. and 2-3/4" O.D O-Ring
Stainless Steel Headers
SB/BB Chevy V8, 13/16"-16 Threads,
TRA1122 1967-69 GM F-Body Automatic — — — 1-3/4”
3-3/16" I.D. and 3-7/16" O.D. O-Ring
(Camaro, Firebird,
Manual — TRA42215 — 1-3/4”
Trans-Am)
1967-72 Chevy/GMC
Automatic — TRA42242 TRA42243 1-3/4”
C10 & C20 Pickups
1973-87 Chevy/GMC
Automatic TRA42251 — — 1-3/4”
C10 & C20 Pickups

2023 - 2024 HOT ROD AND EARLY MUSCLE 489

LS1/Vortec LS Engine Swap Mounting Kits
Motor Mounts for 1978-88 GM A- and G-Body Cars
Use these mounts to install a modern Hand-welded and black
LS1/Vortec 4.8, 5.3, or 6.0L V8 into powder-coated steel brackets
vehicles set up for traditional small block Chevy V8. with rubber bushings make
Part No. Description it easier to install an LS
TRA4582 Sets Engine in Stock SB Chevy Location Polyurethane Mounts engine in 1978-87 A-Body and
TRA4592 Sets Engine in Stock SB Chevy Location Rubber Mounts G-Body cars like the Cutlass,
TRA4595 Sets Engine 1" behind Stock SB Chevy Location Rubber Mounts El Camino, Grand Prix, and Regal, or the 1978-88 Monte
Carlo. Kits include Grade 8 fasteners and hardware.
Engine Swap Adapters Transmission crossmember kit works with GM T56,
Some welding or cutting may be required with TH400, and 4L60/65/70/80 transmissions. A cross-
these engine and transmission components, but member adapter bracket is required for non-200R4
most of the difficult engineering has already been equipped vehicles.
performed...and the mounts work! Part No. Description
Part No. Description TRA4206 LS Engine Swap Mounting Kit for 1978-88 GM A/G-Body Cars
Adapts Small Block Ford 289, 302, 351W TRA6422 Transmission Crossmember Kit for 1978-88 GM A/G-Body Cars
TRA4145
into 1953-64 Ford Pickup
TRA4145
Adapts 1958-Up Small and Big Block Chevy V8
TRA4195
Into 1955-57 Chevy Car Universal Street Rod “Bushing Style" Engine
TRA4196
Adapts 1958-Up Small And Big Block Chevy V8
Into 1949-54 Chevy Car
Mounts
TRA4771
Adapts 1958-Up Small And Big Block Chevy V8 TRA4500
Into 1955-59 Chevy Pickup For small block Chevy 283-
Universal Tubular Motor Mount. Installs Small or Big 350 and big block Chevy
TRA4810 Block Chevy V8 into Frame Rails That Are 24" to 37"
Wide. Uses 1962-70 Chevy Stock Rubber Mounts
396-502. The proper way to
Replacement Biscuit-Style Motor Mount Pads mount an engine. Bushing
TRA9314 mounts eliminate rocking which can cause serious sheet
for TRA4145 and TRA4771
metal damage when a V8 is installed in close quarters,
Engine Swap Mount Kits like under a Model A hood, for example. Mounts are first
bolted to engine, measure between frame rails, trim the
for Chevy C10 Trucks frame mount to fit and then weld to frame rails.
Skip the guesswork and custom
welding with TransDapt LS engine
mounting kits. Built with black Universal Street Rod
powder-coated steel and heavy- TRA4204 “Biscuit-Style"
duty polyurethane bushings, Engine Mounts
engine mounting kits include the mounting brackets and
Mounts use early Ford V8 style
installation hardware needed to fit a LS engine into 1967-
rubber biscuit and through-bolt
72 and 1972-87 Chevy C10 trucks. Compatible with manual
assemblies for a simple, straight-
or automatic transmissions. Add the transmission
forward means of mounting modern
mounting kit for 1967-72 Chevy C10 trucks to make the
V8s. Biscuit-style mounts also limit
swap even easier! TRA4505 TRA4506
engine movement or “rocking." Bolt
Part No. Description mounts to engine, measure distance to frame rails, adjust
TRA4204 LS Engine Swap Mount Kit for 1967-72 Chevy C10
and either weld or bolt in.
TRA4205 LS Engine Swap Mount Kit for 1973-87 Chevy C10
LS Engine Swap Transmission Mounting Kit for Weld-In Bolt-In Description
TRA6420 Small Block Chevy 283-350
1967-72 Chevy C10 TRA4505 TRA4508
and Big Block Chevy 396-502
TRA4506 — Chevy/GM LS1/LS6/Vortec 4.8, 5.3, 6.0L
LS Engine Swap Mounting Kits
for 1978-88 GM A- and G-Body Cars Universal Transmission Crossmembers
Hand welded and black powder coated steel brackets Crossmembers require
with rubber bushings make it easier to install a LS engine some welding. Fits frame
in 1978-87 A-Body and G-Body cars like the Cutlass, El widths of 26" to 36"
Camino, Grand Prix, and Regal, or the 1978-88 Monte TRA6559
between frame rails.
Carlo. Kits include Grade 8 fasteners and hardware. Part No. Description
Transmission crossmember kit works with GM T56, TRA6549 700R4, 4160E, T56 3" Drop Polyurethane Pads
TH400, and 4L60/65/70/80 transmissions. A cross- TRA4539 3" Drop, No Pads
member adapter bracket is required for non-200R4 TRA6559 700-R4, 4L60E, T56, 3" Drop, Rubber Pads
equipped vehicles. TRA6420
1967-72 Chevy C10/C15
LS Engine Swap Transmission Mount
Part No. Description
TRA6422 1978-88 GM A-/G-Body Cars (T56, TH400, 4L60/65/70/80)
TRA4206 LS Engine Swap Mounting Kit for 1978-88 GM A/G-Body Cars
TRA6422 Transmission Crossmember Kit for 1978-88 GM A/G-Body Cars
Crossmember Adapter Bracket for Non-200R4
TRA6423
Equipped Vehicles.

490 2023 - 2024 HOT ROD AND EARLY MUSCLE

Wheel Accessories
Disc Brake Spacers
TRA4082 Oil Filter Relocation Units
These universal wheel spacers are True double filtering of engine oil with
helpful in gaining sufficient disc brake clearance with ultra-high flow. Gain cleaner engine oil
custom wheels. Five-hole spacers are 1/4" thick and and added capacity with these remote
include 4-1/2", 4-3/4", and 5" bolt circles. Sold in pairs. mount billet aluminum filter bases. -12AN
ports. Single filters have 1/8"NPT auxilary
Billet Aluminum Wheel port and dual ports have -8 auxilary port.
Adapters and Spacers Part No. Description
Heavy-duty 6061-T6 billet aluminum TRA3300 Single Filter Base for PH8A Filter or Equivalent
TRA3301 Single Filter Base for HP6 Filter or Equivalent
adapters are 1-1/4" thick, 7" diameter, and
have radiused edges for reduced stress.
Include installed press-in studs and zinc-
plated open-end lug nuts. Sold per pair. Spin-On Oil Filter
Billet aluminum 1/8" thick spacers are available as well. Bypass Adapters
Part No. Description Part No. Description
Adapters Ford with 3/4"-16 Threads and 2-1/2" I.D., 2-3/4" O.D. O-Ring,
TRA3608 5 x 4.5" Vehicle Hub, 5 x 4.75" Wheel TRA3320
(PH8A Filter or Equivalent)
TRA3610 5 x 4.75" Vehicle Hub, 5 x 4.5" Wheel SB/BB Chevy with 13/16"-16 Threads and 3-3/16" I.D.,
TRA3321
TRA3616 5 x 5.5" Vehicle Hub, 5 x 4.5" Wheel 3-7/16" O.D. O-Ring
TRA3617 5 x 5.5" Vehicle Hub, 5 x 4.75" Wheel
Spacers
TRA3607 5 x 4.5" Vehicle Hub, 5 x 4.5" Wheel
Street Performance Plus
TRA3611 5 x 4.75" Vehicle Hub, 5 x 4.75" Wheel Wet Sump Oil Pan
TRA0168
Chrome Differential Covers Fits 1955-79 small block Chevy 283-
400 engines with driver’s side
dipstick and most production
chassis. Will not fit 1962-67
Chevy II, some early Chevelles
and V8 Vega/Monza. Features a 8"
TRA4135 TRA4786 TRA4787 TRA9072 rear sump depth, 7-quart capacity
(including filter), and uses the stock oil pump. TRA2508
Add a show-winning appearance with a brilliant chrome- pickup included.
plated differential cover. Purchase cover only or as a kit,
complete with bolts and gasket.
LS Swap Oil Pan/Filter Kits
Chrome Chrome
Cover Only Cover Kit The engine oil
Application Part No. Part No. filter mounting
Ford boss is in the oil
1979-03 Mustang/Capri, 7.5" Ring Gear ­— TRA9044 pan of the LS
1986-93 Mustang/Capri, 8.8" Ring Gear TRA9465 TRA9045 engine. Many
GM
applications will
1964-72 A/F-Body, 10-Bolt, 8.2" Ring Gear TRA4786 TRA8780
1964-72 A/F/X-Body, 12-Bolt, 8-7/8" Ring Gear TRA4787 —
not allow use of
1964-77 A/F-Body, 10-Bolt, 8.5" Ring Gear TRA4135 TRA9037 the factory LS
1982-92 F-Body, 10-Bolt, 7.5"/7.6" Ring Gear TRA9072 TRA8786 oil pan, requiring
1982-92 F-Body, 8.5" Ring Gear TRA4135 TRA9037 relocation of the oil filter. These kits include a rear-
sump oil pan with pickup, gaskets, and bolts, a remote
filter base, oil lines, filter nipple, and 90° -10AN fittings.
Available with single- or double-filter options.
Single Single
Billet Aluminum Capacity
Sump
Dimensions
Filter
Vertical
Filter
Horizontal
Carburetor Spacers (quarts) Finish Baffled (W x L) Port Port
1967-68 F-Body, 1965-72 Chevelle, 1968-72 X-Body
Spacers and adapters draw in more
air from the carburetor and improve 7 Black Y 10-3/8” x 8-3/8” — TRA0181
throttle response. Include gaskets 1982-2004 S10/Blazer, Early Model GM Cars/Trucks
and installation hardware. TRA3211 5 Red N 8-1/4” x 7” TRA0175 —
Part No. Description
TRA3211 1" Tall, Holley/AFB Torque-Flow Spacer, Ported
TRA3212 2" Tall, Holley/AFB Torque-Flow Spacer, Ported

2023 - 2024 HOT ROD AND EARLY MUSCLE 491

Super Starter
With 3.75:1 gear reduction the Super Starter produces 50% more torque than stock units and is
35% smaller to allow more oil pan and header clearance. All electrical connections are silicone
coated and armature is epoxy encapsulated. Gaskets and seals are used throughout for corrosion
protection. Super Starters weigh in at just 11 pounds. Severe-Duty Super Starters,
recommended when using a 450 CID or larger high-compression engine, have 43%
more cranking power and are only one inch longer and one pound heavier.
Part No. Description
TIL54-40001 Chevrolet V8, Severe-Duty
Ford 289, 302, 351W, 351M, 351C, 400M, FE 390, 427, 428,
TIL54-40013
All with Auto 400M, FE 390, 427, 428 All qith Std., Severe-Duty
TIL54-40014 Ford 429, 460, Severe-Duty

Exhaust Insulating
Wrap Kits
All-in-one package
Exhaust Insulation includes exhaust
Thermo-Tec Header Wrap is an easy way to turn engine insulating wrap, high-heat
heat into a winning edge. Wrapping headers with coating and snap strap. Available in black or original with
Thermo Tec helps keep exhaust heat away from engine two sizes; 4-cylinder or 6-8 cylinder applications.
and reduces underhood temperatures. Keeping the heat Part No. Description
in exhaust pipes promotes better scavenging and helps THE19122 Black Color, 4-Cylinder Applications
keep the incoming air/fuel mixture cool. Installs easily THE19222 Black Color, 6-8 Cylinder Applications
with optional stainless steel snap straps or standard
hose clamps. Hi-Heat Coating
Part No. Description Coating will protect exhaust
Natural Color Wrap wrap from abrasion and harmful
THE11001 1" x 1/16" x 50'L
liquid spills. Extra resins and
THE11002 2" x 1/16" x 50'L
THE11003 2" x 1/16" x 100'L
binders toughen the surface
THE11151 1" x 1/16" x 15'L
of the wrap and protect it from
THE11152 2" x 1/16" x 15'L friction. 11-oz. spray can.
Black Color Wrap Part No. Description
THE11021 1" x 1/16" x 50'L THE12001 Black
THE11022 2" x 1/16" x 50'L THE12002 Aluminum
THE11023 1" x 1/16" x 100'L THE12003 Copper
THE11153 1" x 1/16" x 15'L
THE11154 2" x 1/16" x 15'L Heavy-Duty Spray Adhesive
Copper Color Wrap
THE11031 1" x 1/16", 50'L THE12005
THE11032 2" x 1/16", 50'L Heavy-duty spray adhesive is the answer when
you need a quick-drying, long-lasting spray
adhesive in a high-temperature application.
Extra-strong contact-style adhesive sets
Platinum Exhaust Wrap quickly, lasts even in high-temperature
situations. Comes in a large 16-oz. spray can.
THE11062
The exclusive hybrid construction
features thermal conduction Snap Strap
technology that reduces underhood Narrow width stainless
temperatures and adds engine steel straps are pre-
horsepower. Withstands radiant cut with the multi-lock
heat up to 2000°F. 2" x 50' roll. already attached. Just
insert the end and pull to tighten. Available in individual
sizes of 9" and 18", and in kits for V6 or V8 use.
Part No. Description
THE13101 V8 Snap Strap Kit, (8) 9", (4) 18"
THE13105 V6 Snap Strap Kit, (6) 9", (4) 18"
THE13150 9" Straps, 12-Pack
THE13160 18" Straps, 6-Pack

492 2023 - 2024 HOT ROD AND EARLY MUSCLE

 Express Sleeve™
Express Sleeves provide
Starter Heat Shield the great protection of
a combination of a high-
THE14150 temperature fabric laminated to
Prevent exhaust heat from disabling the starter with a highly reflective Mylar foil, plus
the Thermo-Tec starter heat shield. Strap-on heat the convenience of hook-and-
barrier reflects over 90% of the exhaust heat. Kits cover loop closure. You get ultra-lightweight protection for
the starter and solenoid on all GM, Ford, and Chrysler hoses and wires. They are also fireproof and oil resistant.
applications. Shield is fashioned from high-silica fiber Part No. Description
with an attractive aluminized finish. THE14030 1/2 -1" Dia. x 3'
THE14031 1/2 -1" Dia. x 12'
Battery Heat Wrap Barrier Kit THE14035 1-1/2" Dia. x 3'
THE14035-50 1-1/2" Dia. x 50'
THE13200 THE14036 1-1/2" Dia. x 12'
Battery Wrap is a combination
of materials designed to provide Thermo-Sleeve
the ultimate in protection from Specifically designed to reflect heat from wires or hoses.
battery-destroying heat and Protects from both radiant and conductive heat. Flexible
vibration. The black felt material sleeving is made of a high temperature fabric laminated
is treated with a propriety to a highly reflective foil. Available in sizes from 1/2" to
material that neutralizes acid. 2-1/2" and sold in 3-foot lengths.
The heat barrier is made up of woven silica with a flexible
Part No. Description
aluminized finish. The highly reflective surface of this THE17062 5/8” x 3’, Silver
material is capable of withstanding radiant temperatures THE17075 3/4” x 3’, Silver
in excess of 2000°F. THE17100 1” x 3’, Silver
THE17150 1-1/2” x 3’, Silver
Cool-It Plug Wire Sleeves™ THE17300 3” x 3’, Silver

The double-wall construction

keeps the wire and boot Thermo-Flex
cooler in a high-temperature Thermo-Flex heat shield
engine; withstands conductive heat up to 750°F. The is a composite material
universal size fits most boots, is easy to install, and most with unlimited uses. The
important, it is nonflammable. material provides abrasion
Part No. Description
resistance, thermal
THE14260 Natural, 4 Pack insulation, and physical
THE14262 Black, 4 Pack containment of hose and
wiring.
Ignition/Plug Wire Sleeving Part No. Description
THE17062 5/8” x 3’, Silver
THE14040 THE17075 3/4” x 3’, Silver
High-temperature sleeving can THE17100 1” x 3’, Silver
be used for ignition wires, spark THE17150 1-1/2” x 3’, Silver
plug wires, and even fuel lines to THE17300 3” x 3’, Silver
prevent vapor lock. The sleeving
is highly flexible, expandable, Thermo-Shield Tape
and abrasion resistant. Made with braided e-glass silica Aluminized adhesive backed tape
insulation, silicone outer surface is good for temperature is great for wrapping the hoses and
protection up to 500°F. 3/8" x 25'. wires you don’t want to remove.
Reflects radiant heat up to 2000°F.
Heat Sleeve Part No. Description
New silicone-coated fiberglass fire THE13995 2" x 50'
sleeving protects wires, cables and THE14002 1-1/2" x 15'
hoses from high temperature, liquid
spills and occasional exposure to flame.
Heat sleeves are capable of continuous
protection to 500°F and short-term
exposure through 2200°F.
Part No. Description Color Part No. Description Color
THE18050 1/2" x 3' Black THE18050-10 1/2" x 10' Black
THE18051 1/2" x 3' Silver THE18051-10 1/2" x 10' Silver
THE18075 3/4" x 3' Black THE18075-10 3/4" x 10' Black
THE18076 3/4" x 3' Silver THE18076-10 3/4" x 10' Silver
THE18100 1" x 3' Black THE18100-10 1" x 10' Black
THE18101 1" x 3' Silver

2023 - 2024 HOT ROD AND EARLY MUSCLE 493

 Aluminized Heat Barrier
Thermo-Tec Acoustical Products THE14001
Designed to dampen road and engine noise, abrasion and Versatile aluminized heat
tear-resistant 70-mil thick mats are made of high-density barrier may be installed either
polyethylene film with an aluminum foil composite and fabric or metallic side up.
adhesive backing. Cut to size, peel the backing, press The fabric side can handle
in place, and remove air bubbles with the Mat Roller temperatures from 350-1,200°F,
(available separately). Dampens road and engine noises. while the reflective metallic
surface can endure temperatures up to 2,000°F. Sold in
Super Sonic Acoustical Mat with gray film has great 36" x 40" sheets, barrier may be installed using adhesive
structural integrity. It will bend, flex, and return to shape or rivets with back-up washers.
under tensional forces. Available in three sizes.
The Suppressor is an ideal mat for sound and heat Competition Floor Insulating Mats
control. Perfect for floorboards, doors, and firewalls. Designed with the racer in mind, the Competition Floor
Insulating Mat (Heat Terminator) is made of the highest
quality insulating materials available. The
mat is made with a highly textured
aluminum composite surface
on one side, with a high-
Super Sonic The temperature silica felt
Mat Suppressor center and a durable
Mylar facing.
Part No. Description Part No. Description
Super Sonic Mat THE16510 8" x 12"
THE14710 36" x 24" THE16530 18" x 18"
THE14720 36" x 60" THE16540 18" x 24"
THE14800 Mat Roller
The Suppressor
THE14600 12" x 12" (2-Pcs.) Kevlar Heat Barrier
THE14610 36" x 24" THE16850
THE14620 36" x 60"
The Kevlar Heat Barrier is made
THE14800 Mat Roller
from Kevlar with a Mylar finish.
Product can withstand up to
Cool-It Insulating Mat 3,000°F of radiant heat and can withstand direct contact
Use the Cool-It Mat to counter excessive heat and noise up to 1,100°F. Can be installed using standard rivets with
that penetrates the driver's a backup washer or weather-strip adhesive. Clamps or
compartment through firewalls straps, such as Thermo-Tec's Snap Strap, can be used
and floorboards. It is also perfect to hold the blanket in place for manifolds or exhaust
for use in doors, under hoods, and systems. For use as a heat shield on the undercarriage,
above transmission housings. above the exhaust, the material should also be held in
Part No. Description place by fasteners. Size is 26" x 40".
THE14100 24" x 48"
THE14110 48" x 48"
THE12005 Heavy-Duty, Spray Adhesive, 16 Oz.
Adhesive-Backed Heat Barrier
Composite material applies to any surface or may be
Thermo-Guard FR wrapped around hoses or wires
to protect from 2,000°F+ radiant
Thermo-Guard FR offers the best in heat and sound
temperatures. Available in four
insulation. This lightweight,
sizes.
durable shield does everything:
reduces sound, absorbs Part No. Description
THE13500 12" x 12"
vibration, protects from radiant
THE13575 12" x 24"
heat, and provides an extra THE13585 24" x 36"
layer of insulating padding. The THE13590 24" x 48"
product features 100% synthetic
fiber felt that provides sound and comfort control and a
high-tech foil heat barrier that blocks more than 90% of
Seam Tape
radiant heat. THE13997
Part No. Description Puncture-proof, tear-resistant tape
THE14120 48" x 72", One-Sided Foil works great for taping seams of sound
THE14125 48" x 72", Two-Sided Foil and heat barrier insulation products.
THE14130 24" x 48", One-Sided Foil Two-layer, flame-retardant aluminum
THE12005 Heavy Duty Spray Adhesive, 16-oz. foil is backed by an pressure-sensitive
acrylic adhesive. Packaged: 2" x 30' roll.

494 2023 - 2024 HOT ROD AND EARLY MUSCLE

Rogue Series
Heat Shields Turbo Covers / Kits
THE11500
The Rogue clamp-on heat shields are manufactured from a pulverized
lava rock called basalt to create a high-tech carbon fiber or ricochet
appearance which is capable of withstanding up to 1,800°F direct,
continuous contact, providing the ultimate in protection. Made in USA.
Part No. Description
Clamp-On Heat Shield
THE11500 Rogue Clamp-On Heat Shield, 3.75" x 11.75", Ricochet Black
THE11550 Rogue Clamp-On Heat Shield, 3.75" x 11.75", Carbon Fiber Black
THE11675 12" x 6" Shield
Turbo Covers
THE15004 Kit Fits T3, T4 and T5
THE15073 Rogue T3 Turbo Cover, Includes Wire for Easy Installation, Ricochet Black Cover Only
THE15074 Rogue T4 Turbo Cover, Includes Wire for Easy Installation, Ricochet Black Cover Only

TKO 5-Speed Manual Transmissions

The TKO transmissions use 4615 alloy steel gears, larger diameter output shafts, and
new, one-piece countershafts to withstand 500-600 lb.-ft. of torque. Available with
GM or Ford rear crossmember pattern and 3.27/.68, 2.87/.82 and 2.87/.64 first/fifth
gear ratios. Transmissions include neutral safety switches, back-up light sensors,
mechanical and electronic speedometer pick-ups, and billet short throw shifters.
Tremec recommends GM Syncromesh or Royal Purple ROY01512 (3 quarts).
Part No. Model Torque Capacity Input Spline Output Spline 1st 2nd 3rd 4th 5th
TRETCET18083 GM TKO-500 500 lb-ft 26 31 3.27 1.97 1.34 1.00 .68
TRETCET18084 Ford TKO-600 600 lb-ft 26 31 2.87 1.89 1.28 1.00 .82
TRETCET17722 GM TKO-600 600 lb-ft 26 31 2.87 1.89 1.28 1.00 .82
TRETCET17765 Ford TKO-600 600 lb-ft. 26 31 2.87 1.89 1.28 1.00 .64
TRETCET17805 GM TKO-600 600 lb-ft 26 31 2.87 1.89 1.28 1.00 .64

T-56 Magnum 6-Speed Manual Transmission

The Tremec T-56 is the aftermarket version of the super stout six-speeds found in such
super cars as the ZR1 Corvette and the ACR Viper. Capable of withstanding up to 700 lb-ft
of torque, the T-56 provides crisp shifts and ease of use. Triple-cone synchronizers on first
through 4th gears and double-cone synchronizers on fifth and sixth gears and reverse add
up to accurate, smooth high-RPM shifts. Built-in provisions under the inspection cover
even accommodate a mid-shift conversion. Tremec recommends Mobile 1 synthetic ATF.
Part No. Model Clutch Speedo Drive Input Spline Output Spline 1st 2nd 3rd 4th 5th 6th
TRETUET11009 GM LS Hydraulic Mech & Electric 26 31 2.66 1.78 1.30 1.00 0.80 0.63
TRETUET11012 GM LS Hydraulic Mech & Electric 26 31 2.97 2.10 1.46 1.00 0.74 0.50
TRETUET11010 Ford Mod Cable/Hydraulic Mech & Electric 26 31 2.66 1.78 1.30 1.00 0.80 0.63

T-5 5-Speed Manual Transmission

TRE1352-000-251
Compact and lightweight, yet durable enough to stand up to 500 lb-ft of torque. Well
suited to a variety of applications including Mustangs, street rods, etc., the T-5 5-speed
transmission offers smooth, easy operation and a deep, .63 overdrive. Bellhousing and
proper transmission slip yoke must be purchased separately.
Note: Tremec recommends using Mobil 1 synthetic ATF.
Input/
Torque Clutch Speedo Output Gear Ratio
Application Engine Capacity Type Type Spline 1st 2nd 3rd 4th 5th Rev.
Ford 5.0L 300 lb-ft Hyd. Elec. 10/28 2.95 1.94 1.34 1.00 .63 2.76

2023 - 2024 HOT ROD AND EARLY MUSCLE 495

TKO Transmission Accessories
Part No. Description
TRE2606249 Reverse Light Switch Fits 5 Speeds
TRE30-360-1X Mech. Speedo Plug Kit, Seals Mech. Speedo Opening When Elec. Speedo Is Used.

Differential Covers
Manufactured from durable, cast A319 aluminum, differential covers incorporate bearing cap
support studs to prevent cap movement and breakage, while maintaining proper pinion depth and
backlash. Sold complete with required installation hardware.
Part No. Description
TRFTFS-8510300 GM 8.2"/8.5"
TRFTFS-8510400 GM 7.5"
TRFTFS-8510500 Ford 8.8" TRFTFS-8510300

SR-5R 100% Synthetic

Superstreet Series SR-1 Racing Oils with MPZ®
Synthetic Motor Oils SR-5R offers the highest level of
A unique combination of synthetic base performance and protection for highly
oil technologies and proprietary additive modified race engines. SR-5 utilizes
systems formulated to outperform Group IV/V synthetic base oil chemistries
regular petroleum-based and synthetic and additive technologies engineered
oils. Increases horsepower and torque, to withstand extreme loads, constant
improves fuel economy, and reduces severe temperatures, and maximum
engine temperatures, deposits, and engine revolutions. Not formulated to
oxidation. Outstanding wear reduction. meet current passenger car motor oil
Case of (12) requirements. One-liter bottle.
Description 1-Liter Bottle 1-Liter Bottles Case of (12)
5W30 TRCA160530CE TRCA160530C Description 1-Liter Bottle 1-Liter Bottles
10W30 — TRCA161033C 0W20 — TRCA150020C
10W40 — TRCA161044C 5W30 TRCA150530CE TRCA150530C
5W40 TRCA150540CE TRCA150540C
TR-1R Premium Blend 5W50 — TRCA150550C
20W50 — TRCA152050C
Racing Oils With MPZ®
Torco TR-1 Racing Motor Oil is a blend of SR-5 GDL Catalytic Converter Safe,
hydro-processed petroleum base stocks,
polymers, and proprietary additives High-Tech Street Motor Oil
focused on superior performance and Recommended for use in high-
engine protection. An MPZ® fortified performance and highly modified street
formula, it provides unequalled anti-wear engines where an SAE 5W-30 or SAE
properties and minimizes frictional losses 10W-30 is specifies. Commonly used in all
for increased power. TR-1 protects against OEM’s high-performance street engines,
scuffing, galling, and metal transfer for especially in high temperature conditions.
longer engine life. One-liter bottle. Excellent choice for modern engines
Case of (12)
equipped with catalytic converter and
Description 1-Liter Bottle 1-Liter Bottles oxygen sensor. Provides optimized ring seal
10W30 — TRCA141030C and improved horsepower over other synthetic oils in the
10W40 TRCA141040CE TRCA141040C same viscosity grade. One-liter bottle.
20W50 TRCA142050CE TRCA142050C
Case of (12)
Description 1-Liter Bottle 1-Liter Bottles
5W-40 TRCA150544CE TRCA150544C

496 2023 - 2024 HOT ROD AND EARLY MUSCLE

Racing Gear Oils/GL-6 ATF—Synthetic Automatic
RGO is formulated using highly refined Transmission Fluid
petroleum base stocks and select
additive systems to improve gear Mercon®/Dexron®
protection and high temperature stability. ATF Synthetic is specifically engineered
RGO carries a higher concentration for severe operating conditions
of extreme pressure additives, anti- encountered in racing, off-highway
oxidation, anti-corrosion and anti-foam and highway use. Recommended for
to prevent fluid degradation and extend automatic and manual transmissions that
life of all drive components. One-liter specify Dexron® III (IIE/II) or Mercon® (M2-
bottle. 184A) rated ATF fluids. One-liter bottle.
Case of (12) 1-Liter Description 1-Liter Bottle
Description 1-Liter Bottle Bottles ATF TRCA220085CE
80W90 TRCA248090CE TRCA248090C
85W140 TRCA248514CE TRCA248514C TBO Premium Break-In Oils
TBO break-in oils are perfectly blended
to provide protection during initial
Synthetic Racing Gear Oils/GL-6 start-up and break-in. Formulated with
SGO will maximize power and efficiency a high zinc (63% more than motor oil) for
and provide the highest level of gear maximum protection. Allows rings to “seat”
protection under the most severe speed properly and provides engine flush prior to
and load conditions. It is formulated using switching to oil of choice. One-liter bottles.
a combination of Group IV/V synthetic Case of (12)
base oil chemistries and additive Description 1-Liter Bottle 1-Liter Bottles
technologies. One liter bottle. 30W TRCA100030CE TRCA100030C
40W TRCA100040CE TRCA100040C
Case of (12)
Description 1-Liter Bottle 1-Liter Bottles
75W90 TRCA257590CE TRCA257590C Zinc-Enhanced Engine Protector (ZEP)
75W140 TRCA257514CE TRCA257514C
The new API SL and SM motor oils will
not protect high-performance engines
because “zinc”, the anti-wear chemical, is
Racing Transmission Fluid/API GL-6 purposely removed. ZEP contains MPZ (moly,
RTF reduces parasitic drag for increased phosphorus, and zinc), friction fighting
efficiency without compromising chemistry that adds wear protection back
durability. It is recommended for manual into motor oils. ZEP coats engine parts and
transmissions, transaxles, and units where protects them from dry starts, a leading
an SAE 75W90, 80W90, or 90 is specified. cause of engine damage. 12-oz. bottle. Made
Also replaces SAE motor oil 10W30, 30, for vehicles without catalytic converters.
10W40, or 40 where specified Case of (12)
for transmissions. One-liter bottle. Description 12-oz. Bottle 12-oz. Bottles
Case of (12) SR-1 TRCA010033LE TRCA010033L
Description 1-Liter Bottle 1-Liter Bottles
75W90 TRCA220015CE TRCA220015C
MPZ Engine Assembly Lube HP
MPZ Engine Assembly
Lube stays in
Manual Transmission Fluid/API place, and will not
GL-4 run, migrate, or drip from cam
Light-viscosity, low-friction oil has lobes, lifters, pushrods, gears, and chains, protecting
superior load carrying and wear protection components during the critical break-in period.
properties. Recommended for manual Case of (12)
transmissions, transaxles, and transfer 5-oz. Tube 5-oz. Tubes
TRCA380000QE TRCA380000Q
cases where an ATF or GL-4 light viscosity
oil specified. One-liter bottle.
Case of (12)
Description 1-Liter Bottle 1-Liter Bottles
75W90 TRCA200022CE TRCA200022C

2023 - 2024 HOT ROD AND EARLY MUSCLE 497

MPZ Engine Assembly Lube Limited Slip Friction Modifier
MPZ is a concentrate of oil-soluble mo­lyb­de­num, Formulated for use in limited slip and
phos­pho­r us, and zinc, fortified with poly­mers positraction differentials to reduce gear
and a high-polarity phosphorous to create a noise and clutch chatter. Using a 2%-6%
magnetic attraction to metal. Use MPZ to pre- treatment level, Type G is recommended for
lube cylinders, pistons, wrist pins, cams, lifters, GM applications, while Type F is for use in
etc. Chrysler, Ford, Toyota, and all other vehicles.
Case of (12) 4-oz. bottle.
4-oz. Tube 4-oz. Tubes
Case (12)
TRCA550055JE TRCA550055J Description 4-oz. Bottle 4-oz. Bottles
Type G TRCAFM0010JE TRCAFM0010J
Case of (12) Type F TRCAFM0050JE TRCAFM0050J
12-oz. Bottle 12-oz. Bottles
TRCA550055KE TRCA550055K
Accelerator
A unique blend of additives that transforms
MPZ® Spray Lube the makeup of premium pump gas to closely
Allows the product to penetrate as it sets. resemble race fuel. Specialized fuel additive
Provides complete wear protection for cam lowers end burn temperature, allowing fuel
shafts, rocker-arms, valve springs, push to burn more completely, while increasing
rods, and all other hard-to-reach pressure horsepower. One can of Accelerator mixes
points to reduce frictional heat. Stays put— with 10 gallons of 91 premium unleaded to
won't run, drip, or migrate. provide a 102 octane race gas, or mix with 5
1 Case of (12) gallons of premium unleaded to deliver 105
Description 12-oz. Bottle 12-oz. Bottles octane. Will not harm sensitive O2 sensors or catalytic
MPZ TRCA560000ME TRCA560000M
converters. 32-oz. can.
Case of (6)
Description 32-oz. Can 32-oz. Cans
Accelerator TRCF500010TE TRCF500010T

Small Block Chevy Full-Length Headers

TOC928-9000-06
Performance full-length headers for small block Chevys fit 1962-67
Novas and '67-69 Camaro/Firebird with Total Cost Involved Front Clip.
Coated headers feature 1-3/4" primary tubes, 3" collectors, and 3/8"
laser-cut flanges. Will fit angle and straight-plug Chevy heads.

SuperCool High-Flow Thermostats Water Pumps

These stainless steel high-flow Bright, chrome-plated pumps are
thermostats feature an extra-large all new and feature cast iron bodies,
center port for increased flow, a bypass unless specified.
valve to ensure quick warm-up, and Part No. Description
flow up to 56 gallons per minute. Chevy
Part No. Description TFS1354NAS Small Block, Short Water Pump
TFS900160 1946-66 GM, 160°F TFS1449NA Small Block, Long Water Pump
TFS900180 Ford, AMC, 180°F TFS1494NA Big Block, Short Water Pump
TFS900195 Ford, AMC, 190°F TFS1461NA Big Block, Long Water Pump
TFS910180 1953-80 Mopar, 180°F Ford
Small Block, 1965-73 289, 302, 351
TFS1432A
Passenger Side Inlet 5,440” Long, Aluminum Housing

498 2023 - 2024 HOT ROD AND EARLY MUSCLE

OE-Style As-Cast “Smoothie” Water Pumps
Replacement Water Pumps for Chevrolet Small Blocks
Original equipment-style water pumps “Smoothie” water pumps have a distinctive flat
feature new castings that look top casting. Sleek pump design is perfect for OE
factory original. Most are available performance car restorations. Nickel-plated, non-
with the SuperCool impeller that corroding, low-cavitation SuperCool impeller increases
provides 30% more coolant flow to drastically reduce water flow by 30% and drops coolant temperatures by up
engine temperatures. Heavy-duty ball/roller bearings, to 20°F. All pumps have heavy-duty ball/roller bearings,
center shaft and seals for maximum dependability. a high-strength steel center
Includes stock hose connections, ports, and water pump shaft, premium seals and a spin
TFS1353NA
gaskets. balanced fan hub designed for
Part No. Description high-RPM engines. 5/8" pilot.
TFS1354N Small Block, Short Pump, SuperCool Part No. Finish
TFS1449N Small Block, Long Pump, SuperCool SuperCool Aluminum, Short
1987-95, Small Block, Long Pump, V8,V6 TBI, TFS1353 As Cast
TFS1675N
Reverse Rotation, SuperCool TFS1354NAS Chrome
TFS1494N Big Block, Short Pump, SuperCool TFS1354NBS Chrome TFS1448NA
TFS1461N Big Block, Long Pump, SuperCool SuperCool Aluminum, Long
TFS1594N 1986-93, 5.0L, SuperCool, Aluminum TFS1448NA Chrome
TFS1432N 1965-73, 289, 302, 351W with Passenger Side Inlet, SuperCool TFS1448NB Polished
TFS1468N 1970-78, Windsor with Driver Side Inlet, SuperCool TFS1448NC As Cast
TFS1421N “FE” Engines, SuperCool TFS1459NA Chrome
TFS1459NC Black
Supercool Platinum Shorty Water Pump TFS1459 As Cast
SuperCool Aluminum, Long,
for Ford 5.0L, 302 And 351W V8, V6, 1987-95 TBI Reverse Rotation TFS1675A
Low-profile aluminum TFS1675A As Cast
standard pump provides up
to 1.5" of additional water
pump clearance. Ideal for
installing a small block Ford
engine with V-belt into
space-constricted engine
compartments. Replaces Silver Bullet Alternators
Ford Racing water pump M-8501-E351S. Must be used with Internally regulated alternators
long-style (3.950") 4-bolt crankshaft damper and requires are hand polished and triple
custom pulley (not included). chrome plated. Ultra-low
Part No. Description cut-in voltage regulators keep
TFS1625NG 3/4" Pilot, Chrome 80 amps flowing in low idle
TFS1625NH 3/4" Pilot, Polished
situations. Unit delivers 110
amps at cruise and 140 amps
Platinum Series Water Pumps on the highway. One-wire
New, lightweight aluminum hook-up simplifies installation.
castings provide 30% more Includes “billet” aluminum
coolant flow for temperature fan and choice of V-belt or TFS7140FBULL
drops up to 20°F. Heavy- serpentine pulley.
duty ball/roller bearings, Part No. Description
center shaft and seals offer GM SI
maximum dependability. TFS7140ABULL 140 Amp, V Pulley, Chrome
Adjustable cam stop boss TFS7140ABULL6G 140 Amp, 6G Pulley, Chrome
prevents cam walk out GM 10SI
on small block Chevy. Available in chrome, polished TFS7139ABULL 100 Amp, V Pulley, Chrome
aluminum, and cast finishes. Made in the USA. TFS7139FBULL 100 Amp, V Pulley, Black
TFS7140FBULL 140 Amp, V Pulley, Black
Part No. Description
Ford One-Wire
Small Block Chevy
TFS7068ABULL 100 Amp, V Bullet Pulley, Chrome
TFS1394NA Short Water Pump with 5/8” Dia. Shaft, Chrome Plated
TFS7068BBULL 100 Amp, V Bullet Pulley, Polished
TFS1394NB Short Water Pump with 5/8” Dia. Shaft, Polished
TFS7068BBULL6G 100 Amp, 6G Bullet Pulley, Polished
TFS1511NA Long Water Pump with 5/8” Dia. Shaft, Chrome Plated
TFS7069FBULL 140 Amp, 6G Pulley, Black
TFS1511NB Long Water Pump with 5/8” Dia. Shaft, Polished
TFS7069FBULL6G 140 Amp, 6G Bullet Pulley, Black
Ford
TFS1594NE 5.0L 1986-93, Polished

2023 - 2024 HOT ROD AND EARLY MUSCLE 499

GM Externally GM Internally Regulated Alternators
Regulated Alternator Alternators fit 1971-86 GM
applications that require internally
TFS7102NA regulated units. Offered in chrome-
Chromed-plated 80-amp plated or polished aluminum finishes,
alternator is for 1962-71 GM cars alternators are available in 80- or 100-
which use an external regulator. Amps versions. Single-wire models
require just one wire for proper
hook-up. Alternators are offered with
choice of V-belt or serpentine pulley. TFS7127NB
Ford Alternators
Replacement for 1961-85 Part No. Output Connection Pulley
Ford applications using Chrome
TFS7127NB 80 Amps 1-Wire V-Belt
the externally regulated,
TFS7127ND 100 Amps 1-Wire V-Belt
small-case unit. Single-wire
TFS7127ND6G 100 Amps 1-Wire 6-Groove
alternator requires just one TFS7127NK6G 140 Amps 1-Wire 6-Groove
wire from the battery for Polished
proper hook-up. TFS7127NDP 100 Amps 1-Wire V-Groove
TFS7068RF
Part No. Description TFS7127NDP6G 100 Amps 1-Wire 6-Groove
TFS7078NA 70-Amp, 1G Case, V Pulley, Chrome Cast
TFS7078NB 70-Amp, Hybrid Case, V Pulley, Chrome TFS7127 80 Amps 1-Wire v-Belt
TFS7078ND 100-Amp, Hybrid Case, V Pulley, Chrome TFS7127D 100 Amps 1-Wire V-Belt
TFS7068 100-Amp, Hybrid Case, V Pulley, As-Cast TFS7127D6G 100 Amps 1-Wire 6-Groove
TFS7068RF 100-Amp, Hybrid Case, V Pulley, Black TFS7127K 140 Amps 1-Wire V-Belt
TFS7068RF6G 100-Amp, GM Case, 6G Pulley, Black TFS7127K6G 140 Amps 1-Wire 6-Groove
TFS7068K 140-Amp, GM Case, V Pulley, As-Cast Black
TFS7068K6G 140-Amp, GM Case, 6G Pulley, As-Cast TFS7127NF6G 100 Amps 1-Wire 6-Groove

TFS7524
GM High-Amp Alternators Solid State and One-Wire
Internally Regulated Voltage Regulators
Designed to fit 1971-86 GM External solid state voltage regulators.
vehicles requiring an internal OEM-style plug-in connectors.
regulator. Simple one-wire/OEM Part No. Application
hookup with either 100 or 140 TFS7524 1970-92 Chrysler, Mechanical Regulator
amp output. Manufactured with TFS7545 1969-92 Chrysler, Electronic Regulator
either single V-belt or six-groove TFS7540 1963-90 Ford, External
serpentine pulley and offered TFS7635 1963-74 GM 10 DN , External
in as-cast, chrome, polished, or TFS7639 GM 10SI, 7127, 7139, 7140 One-Wire or OEM, Internal
black powder-coated finishes.
Made in USA. Fan and Pulley Kits
Part No. Description TFS7127D12
Kits include fan, pulley, lockwasher,
100-Amp, One-Wire / OEM Hookup, 12 Clocking, and nut. For Tuff Stuff alternators
TFS7127D12
Single V-Belt Pulley, As-Cast Finish 7102, 7127, 7139, 7140, 7068, 7069.
100- Amp, One-Wire / OEM Hookup, 12 Clocking,
TFS7127D6G12 Part No. Finish Grooves
Six-Groove Serpentine Pulley, As-Cast Finish TFS7600AB
TFS7600AB Stealth Black One
100-Amp, One-Wire / OEM Hookup, 9 Clocking,
TFS7127D9 TFS7600AD Gold Zinc One
Single V-Belt Pulley, As-Cast Finish
TFS7600BB Stealth Black Two
100-Amp, One-Wire / OEM Hookup, 12 Clocking,
TFS7127ND12 TFS7600BD Gold Zinc Two
Single V-Belt Pulley, Chrome Finish
140-Amp, One-Wire / OEM-Hookup, 12 Clocking,
TFS7127NK12
Single V-Belt Pulley, Chrome Finish Alternator Pulleys
TFS7127NKB12
140-Amp, One-Wire / OEM Hookup, 12 Clocking, For Tuff Stuff 7102, 7127, 7139, 7140, 7068,
Single V-Belt Pulley, Black Powder-Coated Finish 7069, CS130, CS144, and Hybrid.
140-Amp, One-Wire / OEM Hookup, 9 Clocking,
TFS7127NKB9 Part No. Finish Grooves
Single V-Belt Pulley, Black Powder-Coated Finish
Silver Bullet Series TFS7610BB Stealth Black Five
140-Amp, One-Wire, Six-Groove TFS7610FB Stealth Black Two
TFS7140BBULL6G TFS7610FD Gold Zinc Two TFS7610BB
Serpentine Pulley, Polished Finish
140-Amp, One-Wire / OEM Hookup,
TFS7140FBULL12 12 Clocking, Six-Groove Serpentine Pulley,
Black Powder-Coated Finish

500 2023 - 2024 HOT ROD AND EARLY MUSCLE

Aluminum Type II Saginaw TFS6176A
Power Steering Pumps Power Steering Pumps
with Bottom Includes new reservoir, keyed shaft
for easy pulley installation, hardware,
Pressure Port cap, and new dipstick. The 1,200 PSI
The compact size of this pumps are engineered for standard
aluminum pump is ideal for gear boxes, while the 800 PSI pumps
tight installations. For use with are for use with popular Mustang
factory or remote reservoir tank II rack and pinion units. Pumps are
depending on part number. 1200 offered with choice of chrome or
PSI and 3 GPM rated. The 5/8” black finishes. Pulley not included.
shaft requires a press-fit pulley. TFS6170AL-1
Part No. Description
100% new.
Chrome Power Steering Pump, 800 PSI,
TFS6174A
Part No. Mounting Fittings Finish Mustang II Rack & Pinion
M8 x 1.25 Black Power Steering Pump, 800 PSI,
TFS6170AL-1 GM Pressure Slip As-Cast TFS6174B
Threaded Holes Mustang II Rack & Pinion
M8 x 1.25 TFS6176A Chrome Power Steering Pump, 1,200 PSI, Standard Gear Box
TFS6170AL-2 -6AN/-10AN As-Cast
Threaded Holes TFS6176B Black Power Steering Pump, 1,200 PSI, Standard Gear Box

GM Saginaw Style Type II Aluminum Early Style Saginaw Direct-Fit

Power Steering Pumps Power Steering Pumps
These chrome, compact power Direct-fit applications cover early GM
steering pumps are assembled muscle cars and hot rod applications.
with all-new components All-new components including reservoir
including reservoir and pump and pump assembly. Pumps have a 5/8"
assembly. Pumps are 1200 keyed shaft for use with a bolt-on pulley
PSI rated to work with most (not included). Factory 5/8"-18 pressure
gear boxes and flow 3 GPM. port-specific pumps include an -6AN port
Kit includes press-fit pulley adapter. Includes a billet-style chrome-
installation kit. Requires press- plated cap and dipstick. TFS6190B
fit pulley which is not included. TFS6170ALD Applications Chrome Black
Made in USA. 1961-66 Chevrolet Full-Size Cars, V8 TFS6190A TFS6190B
Part No. Description 1969 Chevrolet, V8 ­— TFS6194B
-AN Fittings, Threaded Mounting Hole, 1967-68 Chevrolet Camaro, 1968 Chevy II, V8 — TFS6197B
TFS6170ALD-2
Bottom Pressure Port, 17mm Shaft 1969 Chevrolet Camaro and Nova, V8 — TFS6191B
-AN Fittings, Through Hole Mounting, 1966-74 Chevrolet Corvette, 1968-74 AMC — TFS6196B
TFS6175ALD
Top Pressure Port, 17mm Shaft
GM Pressure Slip Fitting, Threaded Mounting Hole,
TFS6175ALD-1
Top Pressure Port, 17mm Shaft
-AN Fittings, Threaded Mounting Hole,
TFS6175ALD-2
Top Pressure Port, 17mm Shaft
TFS6175ALD-7
GM Pressure Slip Fitting, Through Hole Mounting, Chevy Power
Top Pressure Port, 17mm Shaft
Steering Brackets
Laser-cut bracket eliminates the
Aluminum Type II hassles of adapting stock mounts.
Power Steering Pumps Applications include small block
Part No. Description and big block Chevy.
Cast Aluminum TFS6505B
TFS6175AL Part No. Description
with -6 and -10AN Fittings Type II Pumps
Polished Cast Aluminum TFS6505B BB, Short Water Pump, Black
TFS6175ALP
with -6 and -10AN Fittings Saginaw Pumps
TFS6504A SB, Short Water Pump, Chrome
TFS6504B SB, Short Water Pump, Black
TFS6508A SB, Long Water Pump, Chrome
TFS6508B SB, Long Water Pump, Black
TFS6503A BB, Short Water Pump, Chrome
TFS6503B BB, Short Water Pump, Black
TFS6507B BB, Long Water Pump, Black

2023 - 2024 HOT ROD AND EARLY MUSCLE 501

A/C Compressors Power Brake Boosters
Tuff Stuff offers natural, Single- and dual-diaphragm
beautifully polished or chrome styles available to fit virtually all
finished Sanden R-134A air hot rods, customs, and muscle
conditioning compressors in cars. Every unit is vacuum tested
traditional or compact, “Peanut and includes 3/8"-16 mounting
Style” versions. hardware where applicable. TFS2223NC
6-Groove 8-Groove Part No. Description
Serpentine Serpentine 7" and 8" Diameter Boosters
Description Part No. Part No.
TFS2222NB 7", Dual, Gold Zinc
R-134A A/C
Compressor, TFS4515NB6G — TFS2222NC 7", Dual, Black
Polished TFS2223NC 8", Dual, Black
R-134A A/C 9" Diameter—Universal
TFS4515NC6G — TFS2224NA 9", Dual, Chrome
Compressor, Natural
“Peanut” R-134A A/C TFS2224NB 9", Dual, Gold Zinc
TFS4517NA6G —
Compressor, Chrome TFS2229NA 9", Dual with Y7 Rod, Chrome
A/C Compressor, TFS2229NC 9", Dual with Y7 Rod, Black
— TFS4517NC8GBLA
Stealth Black
Brake Booster/Master Cylinder
Power Brake Booster Accessories Combinations
TFS2223NA

Mounting power brake booster/

The perfect combo for updated
master cylinder combos is easy with
braking systems on street rods and
the proper brackets and hardware.
machines. Chrome plating is show
Part No. Description quality. See master cylinder chart
Universal GM 1967-72
TFS4650A* below for reference.
Chrome Brake Booster Brackets
Universal GM 1955-64 Part No. Description
TFS4651A* TFS2221NA 7" Single Diaphragm Power Booster Only
Chrome Brake Booster Brackets TFS4650A
Universal GM 1955-58 7" Dual Diaphragm Power Booster,
TFS4652A* TFS2122NA-2
Chrome Brake Booster Brackets TFS2018NA Master Cylinder Combo
1967-72 GM, Booster Bracket, TFS2222NA 7" Dual Diaphragm Booster Only
TFS4650A7 8" Dual Diaphragm Power Booster,
Black TFS2123NA-2
Universal Brake Booster TFS2018NA Master Cylinder Combo
TFS4750 Extension Rod and Clevis Kit, TFS2223NA 8" Dual Diaphragm Booster Only
Fits All Tuff Stuff Boosters
* Fits Tuff Stuff boosters TFS2221, TFS2222, and TFS2223

Brake Proportioning Valve Kit

Master Cylinders
TFS2302NA New master cylinders,
This chrome-plated beautifully buffed, polished,
proportioning valve chrome-plated, or black. TFS2027NC
fits disc/drum brake
applications with Part No. Bore Hole Port Size Finish
Universal Cast Iron Master Cylinders
1/2" and 9/16" master 9/16" and 1/2"
cylinder ports. TFS2018NA 1" Shallow/Deep
on Driver's Side
Chrome
Manufactured with TFS2020NA 1" Shallow 3/8" on Both Sides Chrome
OEM-style mounting Universal Aluminum Master Cylinders
bracket. Kit includes TFS2025NC 1" Deep 3/8" on Both Sides Chrome
two brake lines TFS2027NC 1-1/8" Shallow
9/16" and 1/2"
Chromed
and all necessary on Driver's Side
mounting hardware. Note: Shallow hole is 1/2" deep; deep hole measures 1-1/2".
Made in USA.
Chrome Chevy OE-Style Starter
TFS3510A
Full-size, original equipment-
style starters are durable
and reliable. Starters are
available to fit Chevy V8s with
staggered bolt pattern with
chrome finish.

502 2023 - 2024 HOT ROD AND EARLY MUSCLE

Chevy Super Mini Starter LS1 Water Pump
TFS6772A 100% new, not
Lightweight, compact remanufactured,
and powerful starter has a LS1 water pumps fit
2.6-horsepower motor that 1998-02 Camaro and
can spin engines with up to 18:1 Firebird, 1997-04 TFS1310B
compression ratios. Adjustable Corvette, and 2004-06
mounting block accommodates GTO. Features include
oil pan and header clearance. lightweight aluminum housings, heavy-duty bearings,
Fits all Chevy V8s with 153 or 168-tooth flywheels. center shafts, and seals for long term dependability.
Offered with chrome and black finishes. Available in polished aluminum and as-cast finish.
Made in the USA.
Part No. Description
Tuff Torque Starters TFS1310B LS1 Water Pump, Polished Aluminum
Designed for high-horsepower, TFS1310C LS1 Water Pump, As-Cast Finish
high-compression (up to 15:1)
engines. The high-torque motor LS1 Power Steering Pump
features a heavy-duty armature, 100% new Type II power steering
premium ball bearings, and a one- pump is a perfect LS1 1998-02
piece motor housing. The units are Camaro and Firebird replacement
light and smaller than OE starters, or ideal for street rods and customs
providing additional header clearance. with limited engine space. Use
Includes bolts and shims where necessary. TFS13510
with factory or remote reservoir
Part No. Description tank. Features include a 5/8" shaft
Chevy requires a press-fit pulley, and hose
TFS13510 SB/BB with Offset Mount, 168-Tooth Flywheel, Gold Zinc
and reservoir factory connections. TFS6175ALP-6
Ford
1966-81 255, 352, 390, 427, 428 FE Engines, Part No. Description
TFS13131 TFS6175ALP-6 LS1 Power Steering Pump, Polished Aluminum
3-Bolt, Gold Zinc
1969-77 351, 400, 429 Engines, TFS6175ALB-6 LS1 Power Steering Pump, Black
TFS13149
2-Bolt Holes with One Threaded, Gold Zinc
LT1 Water Pumps
LS1 Alternators 100% new, not
100% new LS1 alternators are remanufactured,
built on with heavy-duty copper LT1 water pumps
coil windings and spike-resistant include all new
diodes to maintain consistent and aluminum casting
reliable voltage output. Features with stock location
include OEM harness hook-ups, hose connections
internal cooling fans, and low-idle and ports, heavy-
cut-in voltage regulator. TFS8242NA duty bearings, and
seals for maximum TFS1362A
Part No. Description
TFS8242NA LS1, 105A, Chrome Plated, 6-Groove Pulley durability.
TFS8242NAP LS1, 105A, Polished Aluminum, 6-Groove Pulley Part No. Description
TFS8242 LS1, 105A, As-Cast Finish, 6-Groove Pulley TFS1362A LT1 Water Pump, Chrome Plated
TFS1362B LT1 Water Pump, Polished Aluminum
TFS1362C LT1 Water Pump, Cast Finish

2023 - 2024 HOT ROD AND EARLY MUSCLE 503

 TPBTP1200

Racing Batteries Battery Boxes

12-volt, heavy-duty, hand-made Weighing only 1.5 pounds these
AGM batteries are 20% lighter than lightweight, durable boxes
comparable “lightweight batteries” feature TIG-welded 16-gauge
of equal power. Built with a case that mild steel for many years of
will not leak if damaged, they can heavy- duty use. Available in
be mounted in any position. Exceptionally low internal both lay- down and upright TPBBB12
resistance achieves faster recharging and greater starting configurations.
power. Every battery is fully charged and tested prior to Part No. Description
shipment. TPBBB12 Upright Battery Box for TP1200
Part No. Description TPBAB12 Adapter Bracket for TP1200
24 lbs., 1200 Cranking Amps, 700 Cold Cranking Amps,
TPBTP1200
7-3/4"L x 5-1/4"W x 6-7/8"H, Battery Group Size U1.
31 lbs., 1500 Cranking Amps, 800 Cold Cranking Amps,
TPBTP1500
9-7/8"L x 5-1/4"W x 6-7/8"H.

E-Boost Street Electronic Controller

Comp-Gate 40 TBSTS-0302-1002
Comp-Gate 40 has a 40mm external The very popular e-boost
wastegate and is designed to fit street 40 PSI boost
into tight engine bays while offering management system
superior flow and heat-handling provides total control
capabilities. Features a 25% smaller over the boost curve.
size, index cap orientation with 12 Designed for street
different clocking positions. Available TBSTS-0505-1006 and race applications as well as factory turbo cars
with 7 PSI or 14 PSI spring installed, when increasing boost levels are a must. Simple seven-
inlet and outlet weld flanges, inlet and outlet V-band segment display is very visible from daily to extreme
clamps, valve seal, 2x1/16" NPT blanking plugs, and driving conditions.
vacuum nipples.
Part No. Description Gated Boost Control Valve Boost Tee, Black
TBSTS-0505-1006 7 PSI, Black
TBSTS-0505-1010 14 PSI, Black TBSTS-0101-1002
The Turbosmart GBCV will allow boost
Liquid-Filled pressure to be adjusted above the
Fuel Pressure Gauge standard pressure setting. The unique
feature of the GBCV is that it delays
TBSTS-0402-2023 the pressure signal from entering the
Glycerin-filled stainless steel fuel wastegate, which, in turn, spools up the
pressure gauge fits all Turbosmart turbo faster, resulting in more boost
fuel pressure regulators. Features a at lower engine RPM. The boost dial
1/8" male NPT centered port. 0-100 PSI on the top of the unit allows adjusting
range mechanical gauge. without needing any tools. Quick installation.

504 2023 - 2024 HOT ROD AND EARLY MUSCLE

Retro-Fit Rack and Pinion Kits
Unisteer Performance Products rack and pinion kits bolt on, UNI8010600
replacing the old steering linkage for improved handling, less
steering effort, and more responsiveness.

1955-64 Chevy Power Rack-and-Pinion Kit

1928-34 Ford Cross Steer Rack and Pinion Bolt-on power rack and pinion kit is specially designed
Rack-and-pinion unit is a direct replacement on early to fit the stock chassis, with the correct ball center
Fords currently using a Vega-style steering box. It mounts dimension to eliminate bump steer.
to frame using the same mounting holes. Polished and Part No. Description
plated to compliment other components. UNI8010600 1955-57 Chevy, Power Rack-andiPinion Kit, Black
1958-64 SB Chevy, Short Water Pump, Factory Column,
Part No. Description UNI8011040-01
Black
UNI8000460-01 Cross Steer New Build (No Shaft Kit)
UNI8000470-01 Cross Steer Retro-Fit Kit (Incl. Shaft Kit)

1965-70 Ford Mustang Rack and Pinion 1964-72 Chevelle Power Rack-and-Pinion Kit
Unisteer’s early Mustang rack-and-pinion kits with Bolt-on power rack-and-pinion kit improves steering and
engineered steering gear to match the stock suspension, handling, correcting the geometry for better road feel.
and has no bump steer. A simple bolt-on unit includes all The Chevelle kit includes steering shaft and GM pump
steering components using the original steering column. kits.
Part No. Description
Part No. Description
UNI8010780-01 1964-67, Power Rack-and-Pinion Kit
UNI8001090-01 1967-70, Manual Rack-and-Pinion Kit
UNI8010740-01 1968-72, Power Rack-and-Pinion Kit
UNI8001110-01 1965-66, Manual Rack-and-Pinion Kit
1965-66, with SB Ford, Power Steering
UNI8010890-01
Rack-and-Pinion Kit
1960-72 Chevy C-10 Pickup
1966-67 Ford Fairlane Rack-and-Pinion Kit Rack-and-Pinion Kits
for Small Block Ford Bolt-on power rack-and-pinion kit will make your C-10
Designed for use exclusively on 1966-67 Fairlanes steer like a Silverado. The kit includes mounting bracket,
with Ford small block engines (tested with 289- and shaft and U-joint kit, TC pump with reservoir and pulley,
302-equipped vehicles), this kit provides improved hoses, and hardware.
steering performance and feel, with 6” of travel and Part No. Description
2.5-2.75 turns lock to lock. Complete kit includes rack UNI8011650-01 1971-72, Power Rack-and-Pinion Kit
and pinion, outer tie rod ends, mounting brackets, pump
and line kit, steering shaft kit, and mounting hardware.
Includes two sets of outer tie rod ends to match either 1967-81 Camaro/1968-74 Nova
standard taper found on Fairlane steering arms. Rack-and-Pinion Kits
Note: Will not work with factory column shifter, but can be used on cars equipped with Bolt-on manual and power rack-and-pinion kits offer
aftermarket column shifters.
precise control without bump steer. The second
Part No. Description generation 1970-81 Camaro power steering kit includes
UNI8011960-01 1966-67, Power Rack-and-Pinion Kit
a GM-style pump kit.
Part No. Description
1963-82 Corvette Power Rack and Pinion 1967-69 Camaro/1968-74 Nova, Power
UNI8010540-01
Retro-fit rack-and-pinion kit for 1963-82 Corvettes. Rack-and-Pinion Kit
Part No. Description 1967-69 Camaro/1967-74 Nova, Manual Power
UNI8000770-01
UNI8011540 Power Steering Rack-and-Pinion Kit Rack-and-Pinion Kit
1970-74 Camaro, with SB Chevy, Long Water Pump with
UNI8010990-01
PS Pump Kit

1978-88 GM G-Body Rack and Pinion Kit

This front steering rack bolts to a one-piece bracket
designed to mount to the inside frame rails using the
same bolt holes as used by the stock steering box and
idler arm. By matching the stock pivot points, the kit
provides good handling and reduces bump steer, with 7”
of travel and 3 turns lock to lock. Complete kit includes
everything needed for installation: rack and pinion,
outer tie rod ends, mounting brackets, pump and line kit,
steering shaft kit, and mounting hardware.
Part No. Description
UNI8012400-01 1978-88 Power Rack And Pinion Kit

2023 - 2024 HOT ROD AND EARLY MUSCLE 505

 UNI8050230
Steering U-Joints Racing Rack and Pinions
Unisteer steering U-joints are
made of polished stainless steel
with durable long-lasting needle
bearings and a strong pinch-bolt-fastened design for use UNI8000080
in steering applications up to 38° angle. Unisteer offers a number of products for the racing
Part No. Description market. Light manual rack kits drop weight for more
UNI8050230 9/16-26 Spline x 3/4" DD power.
UNI8050240 3/4-36 Spline x 3/4" DD Part No. Description
UNI8050280 3/4-30 Spline x 3/4" DD UNI8000080 1971-72 Pinto Manual Rack-and-Pinion Kit
UNI8050300 3/4 DD x 3/4 DD UNI8000100 1974-78 Mustang Manual Rack-and-Pinion Kit
UNI8050310 1" DD x 3/4 DD UNI8000440 1979-93 Mustang Manual (Standard Ratio)
UNI8050320 1 in-48 Spline x 3/4" DD
UNI8050330 3/4" Smooth x 3/4" DD
UNI8050460 3/4"-30 Spline x 1" DD
1979-93 Mustang Conversion Kit
Steering Coupler UNI8000350
UNI8051060 3/4" Steering Coupler

Kit includes manual rack and pinion, outer tie rods,

bushings, and shaft kit. Standard ratio.

Solid Front Sway Bar – 1-5/15” Dia.

1970-81 GM F-Body
(Camaro, Firebird) Components

Solid Motor Mounts

for 1974-81 GM F-Body Heavy-duty solid front sway bar is made from 1-5/16”
UMI90051 thick CNC bent 4140 chrome moly for maximum
Solid motor mounts decrease strength and durability. Perfect for pro-touring, road
the unwanted engine race, autocross, and corner carving, it greatly reduces
movement caused by the body roll and improves responsiveness. Available with
factory rubber motor mounts, standard steel mounting brackets, or with billet 6061-T6
improving performance and aluminum mounts for ultimate strength and a great look.
consistency. Solid mounts bolt directly to the frame, and Part No. Description
must be used in conjunction with factory block-mount UMI4067 1970-81 F-Body Front Sway Bar Kit w/Steel Mounts
clamshells. Each mount is CNC laser cut from 3/16" mild
steel, MIG welded, with 1" O.D. x 1/4" wall steel tubing, then Performance/Street Adjustable
black powder coated for corrosion resistance. Front End Kit
UMI2627
Rear Leaf Spring Kits UMI266602-R
Transform a second-generation
Made with high-quality US steel,
F-body into a street-friendly,
these multi-leaf springs lower the car
corner-carving, modern-
approximately 2"– 2-1/2" below the
handling muscle car! Front
stock ride height, and feature a 175-lb.
kit includes high-caster
spring rate. They are a direct bolt-in
upper and lower control
replacement, with no modifications
arms for increased strength
needed. Available with choice of polyurethane or Delrin
and reduced deflection,
bushings for improved handling and performance.
providing much-improved
Optional installation kit includes upgraded polyurethane
steering feel. The race-
isolator pads and heavy-duty U-bolts and hardware to
quality springs are rated at 600 lb/in and lower the front
replace worn-out or corroded components.
end approximately 2" for a lower center of gravity. UMI
Part No. Description slim-body monotube shocks control body movement
1970-81 F-Body Rear Leaf Spring Kit with Polyurethane
UMI2625
Bushings
while maintaining a comfortable ride, and a 1-1/4" front
UMI2627 1970-81 F-Body Rear Leaf Spring Installation Kit sway bar helps minimize body roll. Complete kit includes
everything needed for installation.

506 2023 - 2024 HOT ROD AND EARLY MUSCLE

 1982-92 Tubular Non-Adjustable
1970-81 GM F-Body
Rear Control Arms
(Camaro, Firebird) Components (Cont.) Improve vehicle handling
with tubular rear control
arms featuring Energy
Aluminum Body Suspension polyurethane bushings. Direct factory
Mount Kit replacement. Sold in pairs.
UMI2664 Part No. Description
Worn-out factory UMI2015-B Black
body mounts can UMI2015-R Red
result in unwanted
body movement 1982-92 Rear Panhard Bars
and poor handling. These factory replacement
UMI’s aluminum tubular Panhard bars featuring
body mounts restore the body to the right location and Energy Suspension
provide a crisp, responsive feel with reduced subframe polyurethane
movement. Made of CNC-turned aluminum with a black bushings offer
anodized finish, they include mounting hardware. added strength and improved handling.
Part No. Description
1982-92 GM F-Body UMI2019-R Single Adjustable, Red
UMI2029-B On-Car Adjustable, Black
1982-92 Tubular Lower Control Arms
and Non-Adjustable Panhard Bar Kit 1982-92 Rear Control Arm
Relocation Brackets
These brackets offers three positions
and lower the rear of the control arms
up to 3-1/4" to increase traction and
reduce wheel hop. Bolt-in mounting.
Part No. Description
UMI2012-B Black
UMI2012-R Red
These bolt-on replacement mild steel tubular lower
control arms and non-adjustable panhard bar will reduce
wheel hop and body flex while improving the stability
1982-92 Wonderbar
and handling of any F-body car. The powder-coated, Tubular Steering Brace
TIG-welded components feature Energy Suspension UMI2030-R
bushings, zinc-plated sleeves, and are greaseable. This mild steel
Part No. Description tubular support
UMI201520-B Black ties together the front subframes, offering improved
UMI201520-R Red
chassis stiffness for better handling and cornering
characteristics.
1982-92 Single-Adjustable Lower
Control Arms and Panhard Bar Kit Tie Rod Adjusting Sleeves
UMI201621-R UMI2103
Eliminate factory clamp-style
sleeves with the hex-style steel
sleeves. Allows for hassle-free
adjustment. Comes with two heavy-
duty tie rod adjusters and four jam nuts. 5/8" thread fits
1982-92 GM F-body.

Rear Sway Bar

These bolt-on replacement mild steel tubular lower UMI2113-R
control arms and the non-adjustable panhard bar will
The UMI 22mm
reduce wheel hop and body flex while improving the
(7/8") lightweight
stability and handling of any F-body car. The powder-
tubular rear sway
coated, TIG-welded components feature Energy
bar is designed to
Suspension bushings, zinc-plated sleeves, and an
reduce body roll
adjustable QA1 teflon-lined spherical rod end. Red.
and understeer
and increase cornering capabilities, resulting in a more
balanced suspension. 1982-92 GM F-body.

2023 - 2024 HOT ROD AND EARLY MUSCLE 507

 1982-92 GM F-Body
1982-92 GM F-Body (Cont.)
Transmission Mounted Torque Arms
UMI2205-R
Torque Arm Relocation Kits
This transmission cross-member
with integrated torque arm mount
features the correct provisions for
mounting the TH350 transmission The
while still allowing the use of a adjustable direct-fit bolt-in tubular torque arm reduces
factory-style torque arm. The wheel hop and improves 60-foot times. Supplied with
built- in torque arm mount will low-deflection polyurethane front bushing. 1982-
work with virtually any stock-style 84 models require purchase of a new 1985 and later
aftermarket torque arm as well as the factory torque arm clamshell mount.
and features instant center adjustment by moving the
front of the torque arm up or down.
Part No. Description
Solid Motor Mounts
UMI2230-B GM F-Body Torque, Black for 1982-92 GM F-Body
UMI2230-R GM F-Body Torque, Red
UMI90051
Solid motor mounts
1982-02 Camaro Short Antenna decrease the unwanted
UMI2996 engine movement caused
Replace factory non-power steel mast by the factory rubber
antenna with a short black finish antenna. motor mounts, improving
performance and
1982-92 Boxed consistency. Solid mounts bolt directly to the frame, and
must be used in conjunction with factory block-mount
Subframe Connectors clamshells. Each mount is CNC laser cut from 3/16” mild
The three piece weld-in setup offers steel, MIG welded, with 1” O.D. x 1/4” [inch marks] wall
unmatched strength and steel tubing, then black powder coated for corrosion
offers additional resistance.
clearance for dual
exhaust systems.
May not fit 1988-
Lowering Spring Kit
92 models with UMI2461
dual catalytic Designed to lower third
converters. generation F-body cars
Part No. Description approximately 1” – 1.5”,
UMI2400-B Black these coil springs feature
UMI2400-R Red a linear rate (600 lb/in
front, 200 lb/in rear) for
Torque Relocation crisp handling and a better stance. With reduced body
roll and floating, UMI springs provide the perfect blend
Replacement Bushing of comfortable cruising and performance handling. Top-
UMI3004 quality materials ensure consistent rates and stance for
This bushing is required when the factory years to come.
torque arm is used with the torque arm
relocation kit. GM A-Body
LS Motor Mounts
Rear Torque Arm
Hardware Kit UMI4008-R
Allows the installation
UMI3003 of LS power into your
Kit includes longer 9/16" Grade 8 1968-72 GM A-body. LS
bolts to accommodate the thicker mounts place the LS
torque arm mounting plates. In engine in the factory
most cases the factory bolts are SBC/BBC location with
too short. Kit will not work on the ability to move the
Moser 12-bolt. engine rearward up to
3/4" and forward 1/4".
LS mounts bolt directly
to the frame and LS block without modification.

508 2023 - 2024 HOT ROD AND EARLY MUSCLE

Control Arm Reinforcements/ Bolt-In Rear Coil-Over Kit for 1978-88 GM
Frame Braces G-Body—2”–3” Lowering
UMI4029-B
Trailing arm mount braces
are designed to reinforce the
upper and lower front control
arm mounts on your classic
A-Body. The more power your
ride makes the better chance
of bending or breaking the
rear control arm mounts. These
tubular reinforcements tie the
upper and lower control arm mounts
together for added strength and driving
performance. Fits 1964-67 GM A-body.
Lower ride height by 2"–3" and improve handling on the
street and track with this bolt-in coil-over kit. Double-
GM G-Body adjustable Viking Warrior shocks, combined with true
Lowering Spring Kit, 2" Lowering 2-1/2" racing coil-overs with T-bars, provide incredible
responsiveness and 19 levels of compression and
UMI3051 rebound adjustment. Powder-coated 3/16” thick mild
Front springs steel brackets bolt into factory mounting holes with
are wound from no cutting required, allowing easy restoration to stock
premium 5160 configuration, if desired. The FEA-designed lower
CrSi wire and bracket has a multi-position design to allow fine-tuning of
feature a linear ride height and shock location. Kit may also be used with
600 lb./in. rate. UMI 3010 weld-on relocation brackets. Kits available with
The rear springs 14", 110 lb/in springs for drag racing use, or with 12", 150
are wound from lb/in springs for street/handling applications. Bracket
premium 9254 kit also available without shocks/springs. Designed and
CrSi wire and feature a linear 130 lb./in. rate. The linear manufactured in the USA with 100% USA materials.
rate provides consistent handling characteristics which
Part No. Description
are important for AutoCross and Pro-Touring applications Bolt-In Rear Coil-Over Kit, 2”-3” lowering,
while the increase in stiffness reduces body roll and UMI3049-110
w/ 14” 110 lb/in springs
prevents the “floating” feeling so common with the Rear Coil-Over Installation Kit—Brackets only
UMI3049
G-body. (shocks/springs not included)

Front Reinforcement Braces

UMI3053-B
Used to stiffen the front frame horns and front crossmember area on the
GM G-body platform. The UMI three point frame brace takes the place of the
popular “Grand Prix Bar” and also the stock frame reinforcements. Bolt in.

2023 - 2024 HOT ROD AND EARLY MUSCLE 509

 Rear Lower Control Arms/
1978-88 GM G-Body (Cont.) Trailing Arms
UMI3655-B
Weld-In Rear Frame Notching Kit for These new manufactured
1978-88 GM G-Body boxed control arms are a
direct bolt-in designed to replace the
UMI3061 factory-stamped control arms. Over time, factory
The UMI frame notching kit simplifies control arms can rust, weakening them, while the
narrowing the rear upper frame factory bushings dry rot, harden, and crack, decreasing
rails of 1978-88 GM G-body cars to ride quality and vehicle performance. This new control
make room for wider tires. Laser- arm setup is assembled with high-quality greaseable
cut 1/8" thick mild steel follows the polyurethane bushings which improve ride quality and
natural frame contour with a slight overall vehicle performance. Fits 1965-70 GM B-body.
intentional overhang, and includes end enclosures to fill
in between the kit and the original frame. Premium mild
steel welds easily with a standard MIG welder. Cutting,
Adjustable Panhard Bar
welding, and fabrication required. UMI3659-B
This tubular set-
up quickly and
1959-72 GM B-Body easily replaces
the stock panhard
Adjustable Upper Control/ bar on the B-body vehicle adding increased rear-end
Trailing Arm "Banana Arm" stability and rear-end adjustment. This adjustable item
UMI3652-B allows on-car adjustment when rear end centering
is needed. By lengthening or shortening the panhard
On-car adjustable control
bar, you can easily move the rear end side-to-side for
arms for the rear of the
additional tire clearance and proper rear end alignment.
GM B-body vehicles. This
All adjustments are made while the panhard bar is still
rear upper control arm
attached to the vehicle and only requires two jam nuts
is a direct replacement for
to be loosened. This item is a direct replacement for
the factory arms and are designed to
the factory panhard bar and includes new greaseable
minimize wheel hop, improve cornering and help
Energy Suspension polyurethane bushings. Adjustments
track consistency. This control arm is on-car adjustable
are made using a left- and right-hand threaded adjuster
and allows easy pinion angle adjustments. Adjusting the
CNC machined from 4140 Chromoly and heat treated for
control arm is as easy as loosening two jam nuts and
maximum strength. Fits 1965-70 GM B-Body.
turning 4140 heat-treated chromoly adjuster that utilizes
left and right hand threads. Fits 1959-64 GM B-body. Note: May not fit wagons, if item is being installed on a wagon please verify length before
ordering. The center-to-center distance of this panhard bar is 35-3/4". The suggested
maximum center-to-center length of this panhard bar is 36-1/4". The suggested minimum
1967-88 GM A/G-Body center-to-center length is 35".

1” Lowering Spring, Rear - Set

UMI4050R 1979-04 Mustang
These springs are wound from 9254
CrSi premium wire and feature a linear Short Shifter Handle
130 lb/in rate. The linear rate provides UMI1200
consistent handling characteristics This billet aluminum short shifter
which are important for AutoCross and Pro-Touring allows for the feel of a short shifter
applications while the increase in stiffness reduces giving the driver improved control
body roll and prevents the “floating” feeling so common during quick gear changes. The handle
with the A-body. These springs are also great for corner fits stock shifters, T5, T45, Pro 5.0,
carving/cruising. They have a tough black powder-coated Steeda, and other aftermarket shifters.
finish and UMI proudly manufactures these premium
quality springs in the USA.

Examples of VDO gauges and their different styles are shown

below. Please call us for more information, correct applications,
and part numbers.

510 2023 - 2024 HOT ROD AND EARLY MUSCLE

“Wrinkle Plus” Coating Engine Enamels
Provides a rich texture and adds that extra Urethane resins enable this engine enamel to
touch of personal styling. Withstands fading, withstand the strongest solvents and gasoline
grease, engine cleaners, and severe weather additives. Exceptional durability under the
conditions. Mopar restorers: Wrinkle Plus is most adverse conditions. Rated at 550°F. 11-oz.
the paint for that black wrinkle air cleaner aerosol can.
restoration. 11-oz. can. Part No. Color Part No. Color
Part No. Color VHTSP120 Hemi Orange VHTSP128 Gloss Yellow
VHTSP201 Black VHTSP121 Bright Red VHTSP129 Gloss White
VHTSP204 Red VHTSP122 Pontiac Blue VHTSP130 Flat Black
VHTSP123 Chevy Orange VHTSP134 Ford Light Blue
Flameproof Coatings VHTSP124
VHTSP125
Gloss Black
Ford Dark Blue
VHTSP135
VHTSP137
GM Blue
Ford Gray
Originally developed for the aerospace VHTSP126 Chrysler Blue VHTSP139 GM Satin Black
industry, VHT heat-resistant coatings VHTSP127 Aluminum VHTSP145 Clear Gloss
withstand 1,500°F and are ideal for use
on headers and exhaust manifolds. Nu-Cast Coatings
11-oz. can.
Part No. Color
for Engine Blocks
VHTSP101 Flat White Nu-Cast engine and manifold coatings are
VHTSP102 Flat Black unique formulas that restore parts to their
VHTSP106 Flat Silver original cast appearance. Rated at 900°F. 11-oz.
VHTSP109 Flat Red aerosol can.
VHTSP114 Flat Orange Part No. Color
VHTSP115 Clear VHTSP997 Cast Iron Paint
VHTSP117 Flat Aluminum VHTSP998 Header Paint
VHTSP118 Flat White Primer

“Quick Coat” Enamels

Roll Bar and Chassis Paint Formulated to provide a tough and
One-step epoxy paint dries to a baked-on, durable enamel coating without
porcelain-like finish that is chemical, corrosion, heat curing or special processing.
rust, and salt resistant. 11-oz. aerosol can. Ideal for professional or home use.
Part No. Color Rated at 250°F. 11-oz. aerosol can.
VHTSP670 Gloss Black
Part No. Color
VHTSP671 Satin Black
VHTSP504 Gloss Black
VHTSP510 Flat Black
Epoxy All-Weather Coatings
Epoxy Coating produces porcelain-like “Prime Coat” Sandable Primers
hard­ness with a high gloss. The durable Provides an excellent base for enamel or syn­
finish makes it an excellent choice. 11-oz. thet­ic lacquer paint. A quick, fast-drying base
aerosol can. coat with excellent ad­he­sion. 11-oz. aerosol
Part No. Color can.
VHTSP650 Gloss Black
Part No. Color
VHTSP651 Gloss White
VHTSP301 White
VHTSP652 Satin Black
VHTSP303 Red Oxide
VHTSP304 Light Gray
Brake Caliper Paint VHTSP305 Black
Specifically formulated for detailing brake
components, VHT caliper paint may be Self-Etch Primer
used on calipers, rotors, and brake drums.
Paint will resist heat to 900°F and will resist
VHTSP307
chipping, cracking, fading, and rust under Etch and primes in one step.
the most severe conditions. Easily applied, Compatible with all finishes. Great
it dries quickly. Careful preparation of the for spot repair. For superior adhesion
surfaces is essential to a successful brake on plastic, fiberglass, baresteel,
component paint job. 11-oz. aerosol can. aluminum and stainless. 11-oz.
aerosol can.
Part No. Color
VHTSP730 Gloss Clear
VHTSP731 Real Red
VHTSP733 Real Orange Brake Caliper Cleaner
VHTSP734 Gloss Black
VHTSP735 Cast Aluminum
VHTSP700
VHTSP736 Gold An excellent preparation for cleaning calipers
VHTSP738 Bright Yellow prior to painting. Cleans residue from brake
VHTSP739 Satin Black dust, grease, and brake fluid from surfaces for
greater paint adhesion. 11-oz. aerosol can.

2023 - 2024 HOT ROD AND EARLY MUSCLE 511

 Epoxi-Putty
VLC71636
Kneadable, steel reinforced Epoxi-Put­t y cures rock-hard
within minutes of mixing. Can be drilled, tapped, or filed
All-In-One-Silicone after 1 hour and can with­stand temperatures up to 500°F.
Premium grade RTV Silicone can fulfill Packaged in 2-oz. clear cylinder with cap.
all of a racer’s sealing needs. Colors are
low volatility, oxygen sensor safe, and will
withstand high temperatures. 3-oz. tubes Thread Locker
or 11.3-oz. cartridges. VLC71620
Description 3-oz. Tube Part No. 11.3-oz. Cartridge Medium strength 10 ml. anaerobic compound
Part No. de­vel­oped for locking, re­tain­ing, and sealing
Clear All-In-One Silicone VLC71105 VLC71112
fasteners and components. Works in a wide
Black All-In-One Silicone VLC71135 VLC71142
temp range, prevents corrosion, lubricates
Aluminum All-In-One Silicone VLC71195 VLC71202
components dur­ing as­sem­bly, and resists water
and oils. Available in medium strength for parts
Tube-Grip® that need periodic disassembly.
VLC71416
Tube-Grip® is an in­no­va­tive, 14-gauge White Lithium Grease
steel tool that can easily dispense
mate­ri­al from flex­i­ble tubes with no VLC795903
waste. Applies 10 times more pressure Multi-purpose, 12-hydroxy
than squeezing by hand and dispenses up lithium-based Grease has out­
to 35% more ma­te­ri­al out of each tube. stand­ing re­sis­tance to water
and is perfect for high-speed, heavy load ap­pli­ca­tions.
Mechanically stable lu­bri­c ant also con­tains ox­i­da­tion and
Hylomar Universal Blue cor­ro­sion in­hib­i­tors. 10-oz. tube.
VLC71963
Universal Blue was developed as Magic Mix®
an economic automotive version
of Aerograde PL32 without all the
Metal Cleaner and Polish
certifications, and is manufactured The “Lazy Man’s Polish” shines and
using methylene chloride as the protects alu­mi­num, stainless steel,
solvent. 250ml brush-top can. di­a­mond plate, brass, gold, sil­ver,
magnesium, and copper. Magic Mix®
removes ox­i­da­tion, tar, and bugs from
Hylomar Advanced paint and even removes rust from
Formulation/HPF chrome. For tough stains, clean and
VLC71301 prepare metal with Magic Mix® Metal
Clean­er.
Advanced
Formulation is Part No. Description
VLC71610 Cleaner and Polish Set, 8 oz. Each
solvent free and
VLC71611 Metal Polish, 8-oz. Bottle
is available in VLC71640 Metal Polish, 16-oz. Bottle
standard and
high-viscosity versions. Developed for special purposes
to address environmental issues in certain industries.
Magic Mix Speed Wax
Sold in 3.5-oz. tube in box. VLC71644
A quick detailer that contains wax, Speed wax
Peeler shines and protects between hand waxes and
washings.
VLC71688
Removes silicone,
paper or fiber
gasket material
more quickly
and easily than a
gasket scraper.
Short, easy-to-hold Peeler has a unique, self-leveling
blade assembly that won’t dig in or gouge surfaces and
maintains a good, sharp cutting edge.

512 2023 - 2024 HOT ROD AND EARLY MUSCLE

Pro-V Racing Oil Automatic Transmission Fluid
A complete line of premium racing oils Type F
that incorporate the same technology and
expertise behind our professional race VAL822387-C
teams. Lubricants have been optimized Premium-quality transmission fluid meets
in the Valvoline lab and proven on race Ford spec. M2C33-F. Sold in one-quart
tracks throughout the world. Oils are bottles.
engineered to reduce engine wear and
sludge, control foaming and maintain peak
engine power. Sold in one-quart bottles.
Description 1-qt.Bottle
SAE 0W-30 —
SAE 10W-30 VAL822388-C
SAE 20W-50 VAL822347-C
SAE 30W VAL822401-C
SAE 40W VAL822390-C
75W90 Synthetic Gear Oil
SAE 50W VAL822350-C VAL975
SAE 60W VAL822403-C 100% synthetic, extreme-pressure
75W90 lubricant withstands high and low
temperatures and may be used in conventional
Synthetic Motor Oil or limited slip differentials. Sold in one-quart
Valvoline’s 100% synthetic motor bottles.
oil delivers superior lubrication,
performance, and extreme temperature
protection. Extensive testing has proven
increased horsepower, less wear, and High-Performance
cooler engine temperatures. Sold in
one-quart bottles. 80W90 Gear Oil
Description 1-qt. Bottle. VAL831
SAE 5W-30 VAL179 Offers superior protection to differential gears
SAE 10W-30 VAL935 and bearings. Meets or exceeds requirements
SAE 20W-50 VAL945 in all rear axles, including limited slip types.
Meets API Services GL-5, GL-6 ratings. Sold in
one-quart bottles.
Premium Conventional Motor Oil
Specially formulated motor oils include
advanced additive technology and
premium base oils for high performance
and enhanced engine life. Multi-viscosity
grades offer protection, while mono-
grade oils are formulated for warmer
conditions. Sold in one-quart bottles.
Description Part No.
SAE 5W-30 VAL797975-C
SAE 10W-30 VAL797578-C
SAE 10W-40 VAL797671-C
SAE 20W-50 VAL822344-C
SAE 30 VAL797978-C

Val-Plex EP® Grease

VAL614
Premium quality, multi-pur­pose wheel
bearing grease is formulated for max­i­
mum per­for­mance and protection. Re­
sis­ts high tem­per­a­tures and withstands
heavy loads. One-pound can.

2023 - 2024 HOT ROD AND EARLY MUSCLE 513

GEN-II Super Cooler System SureFit™ Systems
VIN61005-VUZ-A
A heat/cool and
defrost unit built
with GEN II electric
servo motors and re-
engineered heating/
cooling coil. The
GEN II unit would be the best choice for large sedans and
wagons.
System Includes:
• Evaporator and Mounting Brackets
• Wiring Harness
Vintage Air offers model-specific systems for classic
• AC Duct Hose
vehicles, with many available in both Evaporator Kits and
• Drain Kit
Complete Kits. “Evaporator” kits include: evaporator
• Heater Control Valve
and bracket, louvers (when required), duct hose, wiring
• Hoses and Ducts for Defrost
harness, new controls or cable converters, hardware, and
Note: Dash vents not included. installation manual. Essentially all the components and
accessories for the inside of the vehicle.
“Complete Kit” is just as it sounds and includes:
everything above plus - all under hood components
such as compressor, engine brackets, condenser with
brackets, pre-formed refrigerant lines, drier, fittings,
hardware, and installation manual. We recommend
ordering a complete kit for reliability and optimum
performance. Designed and tested to mount directly into
the specified vehicle, SureFit condenser kits feature a
parallel-flow condenser, with a receiver/dryer, binary
safety switch, and all the hardlines and hardware needed
to mount it in a stock-configured engine.
Part No. Description
SureFit™ Condenser Kit with Dryer GEN IV SureFit Complete Kits
1955-56 Chevy 4-Vent Complete Kit
VIN96156-PCU (No Molded Center Vent Allows Use of 4 Individual
Louver Locations)
VIN965701 1957 Chevy, Center Vent
VIN961190 1957 Chevy, Center Vent
VIN961170 1970-73 Camaro Complete Kit (Non-Factory Air)
VIN961066 1966-68 Chevelle, Non-Factory Air
VIN965071 1970-72 Chevelle, Factory Air
VIN961071 1970-72 Chevelle Complete Kit (Non-Factory Air)
VIN941170 1967-72 Chevy Truck, Non-Factory Air
VIN944170 1967-72 Chevy Truck Complete Kit (Factory Air Truck)
VIN74056-LFU-A 1956 Ford F100 Complete A/C Kit w/o Controlls
VIN941156 1955-57 GM P/U Complete A/C Kit Non Air Truck
VIN941165 1964-66 GM P/U Complete A/C Kit Non Air Truck
VIN951168 1967-68 Mustang Complete A/C Kit Non Factory Air
VIN961068 1968-69 Chevelle Without Factory Air
VIN961162 1963-65 Corvette Without Factory Air
VIN964173 1963-65 Corvette Without Factory Air
VIN954164 1969-73 Corvette With Factory Air
GEN IV SureFit Evaporator Kits
VIN561190 1967-68 Camaro/Firebird, Non Factory Air
VIN561166 1966-67 Nova
Designed and tested to mount directly into the specified VIN751156 1955-57 Chevy Truck Evaporator Kit with Deluxe Controls
vehicle, SureFit condenser kits feature a parallel-flow VIN751170 1967-72 Chevy Truck Evaporator Kit (Non-Factory Air)
condenser, with a receiver/dryer, binary safety switch, 1967-72 Chevy Truck Evaporator Kit
VIN751171
(Non-Factory Air with Factory Air Control Panel)
and all the hardlines and hardware needed to mount it in a
VIN551168 1967-68 Mustang Evaporator Kit
stock-configured engine. VIN561071 1970-72 Chevelle Evaporator Kit Non Air Car
Part No. Description / Application VIN565702 1957 Chevy Evaporator Kit Non Air Car
VIN011068 Condenser Kit for 1967-68 Mustang VIN011068 1967-68 Mustang Condenser Kit
VIN021167 Condenser Kit for 1968 Chevelle Gen IV VIN021167 Condenser Kit for 1968 Chevelle Gen IV
VIN021170 Condenser Kit for 1970-72 Chevelle Gen IV
Condenser Kit for 1947-54 Chevrolet and Part No. Description
VIN021550 Optional System Components
1947-53 GMC Pickups
Replacement for 1967-72 Control Panel
VIN49767-LCE
for Factory-Air Trucks.

514 2023 - 2024 HOT ROD AND EARLY MUSCLE

GEN-II Compac System GEN II Accessories
VIN68000-VUZ-A Optional GEN-II Control Panels
Great new technology Four-lever machined face panels
makes the Compac have levers to control heat and
the best choice for a cooling levels, fan speed, defrost,
coupe, small sedan, or and direction of airflow. Internal
truck. Electric servo lighting makes panel highly visible
motors control all of the at night.
butterfly airflow doors. VIN48103-SHQ
Part No. Description
This means greater airflow, and no need for high engine VIN48102-SVQ Vertical Control Panel, 2.5" Wide x 4.69" Tall
vacuum. Heat, cool, and defrost model. VIN48103-SHQ Horizontal Control Panel, 4.69" Wide x 2.5" Tall
System Includes: VIN49110-SHQ 4-Lever Horizontal Control Panel 4.6" Wide x 2.44 Tall
• Evaporator and Mounting Brackets
• Wiring Harness Streamline Control Panel
• AC Duct Hose VIN48104-RHQ
• Drain Kit
The same “vintage look” styling
• Heater Control Valve
of the original Vintage Air
• Hoses and Ducts for Defrost
control panel, updated with
Note: Dash vents not included. Heat and cool model. back-lit, knobs that look really cool at night. 5-1/2" wide x
2-1/2" tall.

GEN-IV Magnum Climate Control System Streamline™

VIN671400-VUZ 4-Knob Panels
Heat, cool, and Controls all functions of any
defrost. True bi-level, GEN-II system. Engraved
infinitely adjustable aluminum panel is available
comfort in a classic in fully polished or black
car. This system anodized finish. Knobs are
can handle even the internally lighted with a soft glow.
largest sedan or Part No. Description
wagon. The GEN-IV VIN491200-RUA 5.318" x 1" Tall, Polished Face and Knobs
Magnum has a unique VIN491229 5.318" x 1" Tall, Black Anodized Face and Knobs
shape that will fit in
vehicles with high
transmission tunnels
and stepped firewalls.
The system includes
evaporator and mounting brackets, wiring harness,
electric solenoid heater control valve, A/C duct hoses,
drain kit, and defrost kit (hoses and ducts). Control panel
sold separately.

Installation Mock-Up Units

The easiest way to fit an
evaporator unit into place!
These mock-up units
are representative
cases with jack-nuts
and brackets for each
system but without the internal
components. They are extremely lightweight, so holding
the unit in place to determine fitment, mounting, and
hose routing is a snap.
Part No. Description
VIN660050-VUA Mock-Up of GEN-II Mini
VIN680000-VUA Mock-Up of GEN-II Compac
VIN610050-VUA Mock-Up of GEN-II Super
VIN671450 Mock-Up of GEN-IV Magnum

2023 - 2024 HOT ROD AND EARLY MUSCLE 515

GEN IV Accessories Vertical Super Flow
Dash Mount Vents Condenser
and Accessories VIN03332-VUC
A variety of accessories to choose Vertical super flow condenser measures 20-3/4" tall x 14"
from including chrome or black vents. VIN49056-VUL wide x 3/4" thick. Side exit style.
Part No. Description Note: The above condenser is compatible with HFC-134A or R-12 refrigerants.
VIN49053-VUL Thru-Dash Mount 2-7/8" Diameter for 2-1/2" Hose
Chrome Rectangular Vent,
VIN49056-VUL
3-7/8" x 1-9/16" for 2-1/2" Hose Remote Mount Condenser
VIN49057-VUL
Chrome Rectangular Vent, VIN03500-OVA
4-3/4" x 1-9/16" for 2-1/2" Hose
Streamline Louver Polished Aluminum,
In a vehicle with limited or
VIN49062-VUQ
1-3/4" Tall x 4" Wide non-existent space in front of
Black Rectangular Vent, the radiator, a commonplace
VIN49327-VUL
3-7/8" x 2" Face for 2-1/2" Hose problem in street rods, the 12"
x 20" Remote Mount Condenser
GEN-IV Control Panels with its 12" skewed blade fan may be just the solution. The
Super-compact three- condenser must be mounted in a location that will assure
knob control panels are adequate air flow. Installation requires an extra long hose
for the GEN-IV system. kit and a trinary switch.
Panels feature engraved
mode icons, LED VIN491210-RUA 1967-72 Chevy Truck
backlighted aluminum knobs, and a choice of
polished or black anodized finish.
Superflow Horizontal Condenser
Part No. Description
VIN021567
Polished Face and Knobs, By providing increased
VIN491210-RUA
Horizontal, 4-1/8” Wide x 1-1/4” Tall refrigerant contact with the
VIN491223-RUA
Black Anodized Face and Knobs, micro tube walls and multiple
Horizontal, 4-1/8” Wide x 1-1/4” Tall passes per circuit, SuperFlow
condensers furnish improved
Under Dash Mount Vents flow for a more efficient system
Part No. Description and cooler air in 1967-72 Chevy C-10 trucks.
Under Dash Rectangular
VIN49050-VUL
Louver for 2-1/2" Hose
Under Dash Round Louver
Standard Refrigeration Line Kit
VIN49054-VUL
for 2-1/2" Hose VIN49059-VUL VIN521171
Under Dash Rectangular
VIN49059-VUL The kit features
Louver for 2-1/2" Hose
barrier-type
refrigerant line for use
Kick Panel Mount Vents with HFC-134A or R12
Part No. Description refrigerants as well as
VIN49051-VUL
Left Kick Louver Panel -6AN, -8AN, and -10AN
for 2-1/2" Hose fittings, O-rings, tie wraps, and a refrigerant oil tube.
Right Kick Louver Panel
VIN49151-VUL
for 2-1/2" Hose
1967-72 Chevy C-10 truck.

Hose Kits for

Duct Hose 134A Beadlock Crimp
VIN31700-VBD
Kits with dryer are compatible with
HFC-134A refrigerant.

VIN62415- VIN49592-
Chrome Dryer
VUE VUI VIN07310-VUQ
Part No. Description Chrome dryer includes built-in
Hose Duct Accessories mounting bracket and measures
VIN49592-VUI Y-Connector, 2-1/2" 2-1/2" x 6".
VIN62415-VUE Hose Adapter, 2" to 2-1/2"
Polished Aluminum Dryer
VIN07330-VUQ
Change the dryer without removing any
fittings, measures 2-1/2" x 7".

516 2023 - 2024 HOT ROD AND EARLY MUSCLE

Dryer Clamps 4-WAY A/C - Heater
VIN07113-VUB Aluminum Bulkhead Plate
For use on 2-1/2" dia. dryers. VIN34217-VUQ
Creates professional looking installation
508 Compressors allowing for one-man tightening of
Part No. Description fittings and reduce the possibility of scratching paint.
Double-Groove Pulley, Billet aluminum construction with -6AN to -10AN male
VIN04808-VUA
Standard Finish, for HFC-134A O-ring lines.
Double-Groove Pulley,
VIN04808-VUQ
Polished Finish, for HFC-134A
VIN36140-MPA

Stainless Hardline Parts

Binary Switch Kits Part No. Description
O-Ring Weld-On Line Ends
Kits combine high- and low-pressure TiteFit™ Nut
functions into one switch. VIN24679- VIN36140-MPA -6AN
Part No. Description VUS Male Weld-On O-Ring Nut
VIN24679-VUS Binary Switch Kit for Beadlock Crimp VIN36255-MPA -8AN
VIN11078-VUS Replacement Female Thread, Binary Switch Only VIN36356-MPA -10AN

Fittings for Standard Vintage Air Hose

Trinary Switch Kits
Kits have an inline three function
safety switch that will shut the
compressor off in high- and low-
pressure situations and turns on an VIN35831-VUG
electric fan when the compressor VIN35511-VUG
is running. VIN24678-VUS Part No. Description
Part No. Description Beadlock O-Ring Fittings with 134A Service Ports
VIN11076-VUS Replacement Female Thread, Trinary Switch Only VIN35511-VUG -6AN, Straight with Port
VIN24678-VUS Trinary Switch Kit for Beadlock Crimp VIN35521-VUG -6AN, 45° with Port
VIN35531-VUG -6AN, 90° with Port
Streamline™ Bulkhead Plates VIN35825-VUG -6AN, In-Line Service Port
VIN35512-VUG -8AN, Straight with Port
Lower profile, easier installation. Just VIN35522-VUG -8AN, 45° with Port
drill four individual holes. Machined billet VIN35532-VUG -8AN, 90° with Port
aluminum construction. VIN35542-VUG -8AN, 135° with Port
Part No. Description VIN35826-VUG -8AN, In-Line Service Port
4-Way Square for A/C & Heater VIN35513-VUG -10AN, Straight with Port
VIN384600-MBA 4-Way A/C-Heater, 6-10 Male O-Ring, Polished VIN35523-VUG -10AN, 45° with Port
VIN384800-MBA 4-Way A/C-Heater, 8-10 Male O-Ring, Polished VIN35533-VUG -10AN, 90° with Port
4-Way Diamond for A/C & Heater VIN35543-VUG -10AN, 135° with Port
VIN388600-MBA 4-Way A/C-Heater, 6-10 Male O-Ring, Polished VIN35827-VUG -10AN, In-Line Service Port
VIN389601 4-Way A/C-Heater, 6-10 Male O-Ring, Black Anodized Beadlock O-Ring Fittings
2-Way for A/C & Heater 0-Ring Lines VIN35811-VUG -6AN, Straight
VIN382000-MBA 2-Way Heater, 10-10 Male O-Ring, Polished VIN35821-VUG -6AN, 45°
VIN382600-MBA 2-Way A/C, 6-10 Male O-Ring, Polished VIN35831-VUG -6AN, 90°
VIN382680-MBA 2-Way A/C, 6-8 Male O-Ring, Polished VIN35841-VUG -6AN, 135°
VIN389602 2-Way A/C, 6-10 Male O-Ring, Black Anodized VIN35812-VUG -8AN, Straight
VIN389603 2-Way A/C, 6-8 Male O-Ring, Black Anodized VIN35822-VUG -8AN, 45°
VIN389802 2-Way A/C, 8-10 Male O-Ring, Black Anodized VIN35832-VUG -8AN, 90°
VIN389803 2-Way Heater, 10-10 Male O-Ring, Black Anodized VIN35842-VUG -8AN, 135°
4-Way In-Line for A/C & Heater VIN35813-VUG -10AN, Straight
VIN386600-MBA 4-Way A/C-Heater, 6-10 Male O-Ring, Polished VIN35823-VUG -10AN, 45°
VIN389804 4-Way A/C-Heater, 6-10 Male O-Ring, Black Anodized VIN35833-VUG -10AN, 90°
VIN35843-VUG -10AN, 135°

2023 - 2024 HOT ROD AND EARLY MUSCLE 517

Four-Way Bulkhead Standard Heater Hose Kit
Beadlock Type Fitting Kit VIN31400-VUD
VIN35704-VUD Includes: 10 feet of 5/8" heater
Kit includes four straight fittings, hose, two standard male O-ring 90°
four 90° fittings and refrigerant oil. bulkhead fittings, two female O-ring
90° fittings and eight hose clamps.

Bulkhead Fittings Adjustable Fan Thermostat

VIN24675-VUT
VIN35881-VUG Turns on fan at predetermined
temperature via a probe inserted
through the radiator, 1/4"NPT.
Part No. Description
Bulkhead Beadlock Male Fittings, Sold Individually
VIN35861-VUG -6AN, Straight Ford Coyote 5.0L Front Runner
VIN35863-VUG -10AN, Straight Accessory Drive System
VIN35881-VUG -6AN, 90°
VIN35882-VUG -8AN, 90° VIN174020
VIN35883-VUG -10AN, 90° This system Includes:
• Precision Machined Compressor Bracket
• Sanden SD-7B10 Compressor
Heater Fittings • Compressor Clutch Cover
• Delphi-Saginaw Power Steering Pump for
Remote Reservoir
• Precision Machined Power Steering Pump
Bracket
VIN354100 VIN36033-MPA • Dayco Performance Serpentine Drive Belt
Part No. Description • Dayco OEM Tensioner Idler Pulley
Beadlock Heater Fittings • ARP Stainless 12-Point Hardware Kit
VIN354100 -10AN, Straight Detailed Installation Book
VIN354200 -10AN, 45°
VIN354300 -10AN, 90° Front Runner Engine
O-Ring Bulkhead Heater Fittings for 5/8" Hose
VIN34215-VUG -10AN, Straight Accessory Drive
Stainless Manifold Heater Fittings Systems
VIN36033-MPA Straight 1/2"NPT to -10AN Male O-Ring
One of the most
VIN36032-MPA Straight 3/8"NPT to -10AN Male O-Ring
misunderstood and under-
appreciated components in
Pro Quality Crimp Tools any automotive drive train
for Refrigerant Lines is the engine accessory
VIN424005 drive system. The accessory
drive system operates often
Standard aluminum beadlock
at rotating speeds even
A/C hose crimper, 134A
higher than the engine’s
crankshaft. No matter how well built or powerful your
engine may be, the engine accessory drive is its life
Barrier-Type Refrigerant support system.
Hose This system Includes:
Includes adequate hose length • Main Truss Mounting Bracket • Compressor Clutch Cover
to connect complete system, • Tensioner Bracket • Tensioner Cover Kit
all O-ring fittings and crimp • High-Performance Aluminum • Power Steering Pump with
ferrules. 134A systems include Water Pump Integral Reservoir
fittings with service ports. • ARP Polished Stainless • Water Pump Pulley
Hardware • Power Steering Pulley
Includes: 6 ft. of -6AN, 4 ft. of • Sanden A/C Compressor with • Dayco Serpentine Belt and
-8AN, and 5ft. of -10AN barrier O-Ring Tensioner
hose. • Adaptor Blocks • Crank Pulley
Part No. Description • 140-Amp Alternator
VIN31700-VBD Hose Kit with Dryer for 134A Beadlock
Part No. Description
VIN31703-VBD Hose Kit without Dryer for 134A Beadlock
Chevy
VIN174011 Chevy LS with Power Steering, Black

518 2023 - 2024 HOT ROD AND EARLY MUSCLE

Exhaust Sleeve Clamps T-304 Stainless Steel 120° Bends
Easily and effectively clamp Tube Tube Center Leg Leg
equal-sized exhaust tubing. All Part No. O.D. Thickness Radius A B
clamps are stainless steel and VIB13004 1-3/4" 16 Gauge 1-3/4" 4" 12"
3-1/2" long. Sold each. VIB13005 1-7/8" 16 Gauge 1-7/8" 4" 12"

Part No. Description

VIB1171 Stainless Steel Clamp for 2-1/2" O.D. Tubing T-304 Stainless Steel 90° Bends
VIB1172 Stainless Steel Clamp for 3" O.D. Tubing Tube Tube Center Leg Leg
Part No. O.D. Thickness Radius A B
Exhaust Seal Clamps VIB13032 1-1/2" 16 Gauge 1-1/2" 4" 12"
VIB13034 1-3/4" 16 Gauge 1-3/4" 4" 12"
Stainless steel clamps offer VIB13035 1-7/8" 16 Gauge 1-7/8" 4" 12"
excellent clamping and sealing VIB13036 2" 16 Gauge 2" 4" 12"
of overlapping tubing with no VIB13038 2-1/4" 16 Gauge 3-3/8" 4" 12"
permanent distortion of the VIB13040 2-1/2" 16 Gauge 3-1/2" 4" 12"
pipes. Clamps are one inch VIB13042 3" 16 Gauge 5" 4" 12"
wide. Sold individually.
Part No. Description T-304 Stainless Steel 60° Bends
VIB1166 Stainless Steel Clamp for 2-1/2" O.D. Tubing
Tube Tube Center Leg Leg
VIB1167 Stainless Steel Clamp for 3" O.D. Tubing Part No. O.D. Thickness Radius A B
VIB1168 Stainless Steel Clamp for 4" O.D. Tubing VIB13066 2" 16 Gauge 2" 6" 6"
VIB13068 2-1/4" 16 Gauge 3-3/8" 6" 6"
U-J Mandrel Bends VIB13070 2-1/2" 16 Gauge 3-1/2" 6" 6"
Bends combine one each of 180°, 45°, VIB13072 3" 16 Gauge 5" 6" 6"
C A
and straight legs. Ideal for fabricating
exhausts, headers and intercoolers. B T-304 Stainless Steel 45° Bends
Available in T304 stainless steel or mild, Tube Tube Center Leg Leg
aluminized steel. 16-gauge thickness. Part No. O.D. Thickness Radius A B
VIB13094 1-3/4" 16 Gauge 1-3/4" 6" 6"
Stainless Steel Tube Center Leg Leg Leg
Part No. Part No. O.D. Radius A B C VIB13096 2" 16 Gauge 2" 6" 6"
VIB2601 VIB12601 1-1/2" 3" 5" 9" 12" VIB13098 2-1/4" 16 Gauge 3-3/8" 6" 6"
VIB2603 VIB12603 1-3/4" 3-1/2" 5" 9" 12" VIB13100 2-1/2" 16 Gauge 3-1/2" 6" 6"
VIB2604 — 1-7/8" 3-3/4" 4" 6" 12" VIB13102 3" 16 Gauge 5" 6" 6"
VIB2605 VIB12605 2" 4" 4" 8" 12"
VIB2607 VIB12607 2-1/4" 3-1/2" 4" 8" 12"
VIB2609 VIB12609 2-1/2" 3-1/2" 6" 8" 11"
VIB2611 VIB12611 3" 5" 7" 8" 17" T-304 Stainless Steel 15° Bends
Tube Tube Center Leg Leg
T-304 Stainless Steel 180° Bends Part No. O.D. Thickness Radius A B
VIB13130 2-1/2" 16 Gauge 3-1/2" 5" 5"
Tube Tube Center Leg Leg
Part No. O.D. Thickness Radius A B
VIB2620 1-1/2" 16 Gauge 1-1/2" 4" 4"
VIB2622 1-3/4" 16 Gauge 1-3/4" 4" 4"
VIB2623 1-7/8" 16 Gauge 1-7/8" 4" 4"
VIB2624 2" 16 Gauge 2" 4" 4"
VIB2625 2-1/8" 16 Gauge 3-1/8" 5" 5"
VIB2626 2-1/4" 16 Gauge 3-3/8" 5" 5"
VIB2628 2-1/2" 16 Gauge 3-1/2" 5" 5"
VIB2684 2-1/2" 16 Gauge 2-1/2" 4-1/2" 4-1/2" T-304 Stainless Steel Round Tubing,
VIB2656 3" 16 Gauge 5" 5" 5" Straight Lengths
Tube Tube Overall
Part No. O.D. Thickness Length
VIB2636 1-1/2" 16 Gauge 5 ft.
VIB2638 1-3/4" 16 Gauge 5 ft.
VIB2639 1-7/8" 16 Gauge 5 ft.
VIB2645 2" 16 Gauge 5 ft.
VIB2640 2-1/4" 16 Gauge 5 ft.
VIB2641 2-1/2" 16 Gauge 5 ft.
VIB2642 3" 16 Gauge 5 ft.

2023 - 2024 HOT ROD AND EARLY MUSCLE 519

Stainless Steel Merge Vanjen Clamping System
Collectors VIB12517
High-quality, affordable 3-1/2" O.D. tubing aluminum
T304 stainless steel merge clamping system has a quick
collectors free up extra release and provides a leak-free,
horsepower. Collectors are modular connection ideal for pressurized air applications
TIG welded at every seam like turbocharger intakes. Consists of two weld fittings
and hand ported inside for with O-rings, one union sleeve, a safety pin, and a
smooth, unobstructed flow. Three sizes are available. spring-loaded clamp assembly. The sleeve houses the
Sold individually. fittings once they are welded to the tubing and the clamp
Inlet Transition pulls them together. The connection is flexible and can
Inlet Tubing Outlet Cone Outlet
Part No. Slipover Length O.D. Cone O.D. withstand vibration, movements along its axis, lateral
I.D. Length misalignment, and angular deflection up to 12°. Assembly
VIB10302 1-3/4" 7" 2-1/2" 3-3/4" 3"
VIB10308 2" 7-3/4" 3" 3-3/4" 3-1/2"
includes one quick-release clamp, one pair weld fittings,
VIB10312 2-1/8" 7-1/8" 3-1/2" 4" 4"
and one hard-anodized aluminum union sleeve.

Polished 6061 Aluminum HD Quick Release Clamp

Straight Tubing This modular flexible connector
constructed from solid billet
VIB2172 T6061 aluminum has a burst
Polished 6061 auminum straight tubing has a 1-3/4" O.D. rating of 800 PSI and up to 12° of
and is 16 gauge thickness and 18" long. axial movement. Complete with
quick-release locking pin. Available in either blue or black
anodized finish.
2-1 Merge Collectors Part No. Size Color
T304 stainless steel VIB12536 3" Black
construction. VIB12537 3-1/2" Black
VIB12538 4" Black
Part No. Description
VIB10352 1-3/4" Inlet I.D, 2" Outlet O.D.
VIB10354 1-7/8" Inlet I.D, 2-1/4" Outlet O.D. HD Clamp Full Assembly
VIB10355 2" Inlet I.D, 2-1/2" Outlet O.D. Designed to withstand up to
VIB10356 2-1/4" Inlet I.D, 3" Outlet O.D. 400°F and with a burst pressure
VIB10358 2-1/2" Inlet I.D, 3" Outlet O.D. rating of 800 PSI, HD clamp
assemblies are ideal for clamping
Stainless Steel V-Band Flange Assemblies turbo intake charge piping. Each
Borrowing an idea from the big rigs, Vibrant now offers a assembly includes a billet 6061
means of pipe connection that is an excellent alternative aluminum clamp, combined with
to more traditional clamps. Flanges are welded to each (2) aluminum weld ferrules with O-rings, (1) union sleeve,
pipe to be mated and then they fit face to face inside a and (1) locking pin. Available in blue or black anodized
special grooved clamping ring tightened by a T-bolt. clamp finish.
Part No. Description Description Black Blue
VIB1487 1-3/4” O.D. Tubing HD Clamp Assembly for 3” O.D. Tubing VIB12516 VIB12516B
VIB1488 2” O.D. Tubing HD Clamp Assembly for 3-1/2” O.D. Tubing VIB12517 VIB12517B
VIB1490 2-1/2” O.D. Tubing HD Clamp Assembly for 4” O.D. Tubing VIB12518 VIB12518B
VIB1496 2-3/4” O.D. Tubing
VIB1491 3” O.D. Tubing Stainless Steel T-Bolt Clamps
VIB1492 3-1/2” O.D. Tubing 300-Series stainless steel clamps
VIB1493 4” O.D. Tubing
offer corrosion resistance and
VIB1494 5” O.D. Tubing
reliable, leakproof connections.
Bolt and locknut are included.
Aluminum V-Band Flange Two clamp assemblies to a pack.
Assemblies Part No. Description Clamp Range
Identical in design and construction to the stainless steel VIB2791 For 2" I.D. Couplings 2.27"- 2.63"
assemblies, but made of aluminum. Available for 2-1/2", VIB2792 For 2-1/4" I.D. Couplings 2.53"- 2.75"
3", 3-1/2", and 4" O.D. tubing. VIB2793 For 2-1/2" I.D. Couplings 2.75"- 3.10"
VIB2794 For 2-3/4" I.D. Couplings 3.01"- 3.25"
Part No. Description
VIB2795 For 3" I.D. Couplings 3.28"- 3.60"
VIB11490 2-1/2" O.D. Tubing
VIB2796 For 3-1/2" I.D. Couplings 3.76"- 4.05"
VIB11491 3" O.D. Tubing
VIB2798 For 4" I.D. Couplings 4.20"- 4.60"
VIB11492 3-1/2" O.D. Tubing
VIB2799 For 5" I.D. Couplings 4.30"- 5.60"
VIB11493 4" O.D. Tubing

520 2023 - 2024 HOT ROD AND EARLY MUSCLE

Stainless Steel Worm Gear Clamps Weld Bungs
Made of T304 stainless steel, these Male and female aluminum and mild steel
worm gear clamps are available in a weld bungs for radiators, oil pans, custom
variety of sizes and are much more tanks, and plumbing.
durable than standard hardware Aluminum Mild Steel Description
store clamps. Sold in packs of 10. Part No. Part No.
Male AN Bungs
Part No. Description VIB11150 — -4 AN, 7/16"-20, 3/4" O.D.
VIB12150 Clamp Range 0.25" - 0.63" Band Width 5/16"
VIB11151 VIB11251 -6 AN, 9/16"-18, 7/8" O.D.
VIB12151 Clamp Range 0.44" - 0.90" Band Width 1/2"
VIB11152 VIB11252 -8 AN, 3/4"-16, 1" O.D.
VIB12152 Clamp Range 0.75" - 1.50" Band Width 1/2"
VIB11153 VIB11253 -10 AN, 7/8 -14, 1-1/8" O.D.
VIB12153 Clamp Range 1.30" - 2.16" Band Width 1/2"
VIB11154 VIB11254 -12 AN, 1-1/16"-12, 1-3/8" O.D.
VIB12154 Clamp Range 2.04" - 3.00" Band Width 1/2"
VIB11155 VIB11255 -16 AN, 1-5/16"-12, 1-5/8" O.D.
VIB12155 Clamp Range 2.79" - 3.74" Band Width 1/2"
VIB11156 VIB11256 -20 AN, 1-5/8"-12, 1-3/4" O.D.
VIB12156 Clamp Range 3.54" - 4.49" Band Width 1/2"
Female AN Bungs
VIB12157 Clamp Range 4.05" - 5.00" Band Width 1/2"
VIB11162 — -8 AN, 3/4"- 6, 1" O.D.
VIB12158 Clamp Range 4.56" - 5.51"Band Width 1/2"
VIB11164 — -12 AN, 1-1/16"-12, 1-3/8" O.D.
VIB11165 — -16 AN, 1-5/16"-12, 1-5/8" O.D.
Weld Bungs with Female NPT Bungs
Aluminum Caps VIB11170 VIB11270 1/8"-27 NPT, 3/4" O.D.
VIB11171 VIB11271 1/4 -18 NPT, 7/8" O.D.
Ideal for adding oil fill openings to VIB11172 VIB11272 3/8 -18 NPT, 1" O.D.
rear ends, valve covers, etc. Bungs VIB11173 VIB11274 1/2"-14 NPT, 1-1/4" O.D.
are offered in aluminum or steel VIB11174 VIB11274 3/4"-14 NPT, 1-3/8" O.D.
construction.
Part No. Description
VIB11291 2" O.D. Aluminum Weld Bung, Black Cap Universal Catch Cans
VIB11295 2-3/4" O.D. Aluminum Weld Bung, Black Cap
Manufactured from 6061 anodized
aluminum.
Windshield Washer Bottles
Part No. Description
VIB10400 VIB12695 Recessed Filter Top, Black
This 1.2L bottle kit is designed for use VIB12697 Recirculating Closed Loop Top, Black
in engine compartments that need
to free up space. For anyone who has
installed a turbo or supercharger. Universal Flexible Split Sleeving
Includes everything needed to replace Suitable for the bundling of wires or cables,
an OEM bottle. flexible braided sleeving
features a split design that
allows adding or removing
wires without complete
disassembly. Lightweight
sleeving is offered in
1/4", 1/2", 3/4", 1", or 1-1/2"
Custom Exhaust Accessories diameters. Offered in black
only.
Part No. Description
Oxygen Sensor Fitting, Part No. Description
VIB1193A VIB25800 1/4" Dia. Sleeving, 10’ Long
Mild Steel, 45°Angle, M18 x 1.5 Thread, One Only
Oxygen Sensor Fitting, Mild Steel, 45° Angle, VIB25801 1/2" Dia. Sleeving, 10’ Long
VIB1193
M18 x 1.5 Thread, Box of 5 VIB25802 3/4" Dia. Sleeving, 10’ Long
VIB11105 Oxygen Sensor Fitting, Mild Steel, M18 x 1.5 Thread, One Only VIB25804 1" Dia. Sleeving, 5’ Long
VIB1188 Saddle-Style Weld-On Oxygen Sensor Bung VIB25806 1-1/2" Dia. Sleeving, 5’ Long
Oxygen Sensor Fitting, M18 x 1.5 Thread,
VIB1194A
Stainless Steel, Individual
Universal Oil Cooler Cores
Oxygen Sensor Fitting, M18 x 1.5 Thread,
VIB1194
Stainless Steel, Box of 5 VIB12893
VIB1195A
Threaded Hex Bolt, M18 x 1.5 Thread, The bar-and-plate
Zinc-Plated Steel, One Only
construction allow
Threaded Hex Bolt, M18 x 1.5 Thread,
VIB1195
Zinc-Plated Steel, Box of 5
fabricators to custom
Exhaust Gas Temp. Sensor Fitting, 1/8"NPT, Stainless Steel, build oil coolers to
VIB1197 specific requirements.
One Only
Exhaust Gas Temp. Sensor Fitting Plug, 4" x 10" x 1-1/4"
VIB11147
1/8"NPT, Stainless Steel, One Only
VIB10340 Weld-On Collector Tab

2023 - 2024 HOT ROD AND EARLY MUSCLE 521

26" Intercooler 90° Elbows
VIB12800 Part No. Description Radius Leg
Length
Improve turbocharger VIB2843 1-3/4" Elbow 1-3/4" 4"
output with the addition VIB2740 2" Elbow 2" 4"
of an intercooler. Both VIB2742 2-1/2" Elbow 2-1/2" 3-3/4"
end tanks are pressure tested to ensure a leak-free VIB2744 3" Elbow 3" 3-1/2"
assembly. Dimensions: 18"W x 6-1/2"H x 3-1/4"D. Inlet/ VIB2745 3-1/2" Elbow 3-1/2" 3-1/4"
outlet 2-1/2" x 2-1/2". VIB2746 4" Elbow 4" 3"
VIB2748 4-1/2" Elbow 4-1/2" 3"

Manual Boost Controller

Transition Hose Couplings
VIB16901 Connect pipes of different diameters with these four-ply
Machined from billet T6061 silicone transitional couplings. All are 3" long.
aluminum this compact
Part No. Description
lightweight boost controller is VIB2766 2" x 2-1/2" Transition Coupling
designed with a unique integrated VIB2771 2-1/2" x 2-3/4" Transition Coupling
dial which allows precise settings VIB2772 2-1/2" x 3" Transition Coupling
to eliminate the possibility of VIB2773 2-3/4" x 3" Transition Coupling
over-boosting the engine. Includes four feet of silicone VIB2774 3" x 3-1/2" Transition Coupling
vacuum hose. Flack anodized finish. VIB2775 3" x 4" Transition Coupling
VIB2776 3-1/2" x 4" Transition Coupling

Standard 5" Tall Filters

“The Classic” 4-ply cotton gauze filter.
Pre-oiled and washable. 5" tall. 90° Transition Elbows
Part No. Description Part No. Description Radius Leg Length
VIB10923 3" Inlet I.D. VIB2780 2" x 2-1/2" Transition Elbow 2-1/2" 4"
VIB10925 4" Inlet I.D. VIB2781 2-1/2"x 2-3/4" Transition Elbow 2-3/4" 4"
VIB2782 2-1/2" x 3" Transition Elbow 3" 4"
VIB2785 3" x 4" Transition Elbow 4" 3-1/2"
Classic 3-5/8" Short Filters
VIB10931
"The Classic" 4-ply cotton gauze filter.
Pre-oiled and washable. Has a 4" inlet I.D. 45° Elbows
and is 3-5/8" tall. Part No. Description Radius Leg Length
VIB2750 2" 45° Elbow 2" 5"
VIB2752 2-1/2" 45° Elbow 2-1/2" 4-1/2"
Reinforced Silicone Couplings VIB2754 3" 45° Elbow 3" 4-1/4"
VIB2756 4" 45° Elbow 4" 3-1/2"
Reinforced and hand-wrapped 4-ply
silicone couplings are capable of
withstanding high temperatures and Female to Male
high boost conditions without swelling Metric Union Extender
or bursting. Available in black, in 3" and VIB10597
36" straight sections.
Black anodized 6061 aluminum
Part No. Description M16x1.5 female-to-male union
VIB2706 3" Long, 2" I.D., Straight Coupling, Black
extender has (3) 1/8" NPT ports.
VIB2708 3" Long, 2-1/4" I.D., Straight Coupling, Black
VIB2710 3" Long, 2-1/2" I.D., Straight Coupling, Black
VIB2712 3" Long, 2-3/4" I.D., Straight Coupling, Black In-Line Check Valve
VIB2714 3" Long, 3" I.D., Straight Coupling, Black
VIB2716 3" Long, 3-1/2" I.D., Straight Coupling, Black
VIB11118
VIB2718 3" Long, 4" I.D., Straight Coupling, Black Black anodized aluminum in-
VIB27151 12" Long, 3" I.D., Straight Coupling, Black line check valve for -8AN
VIB2711 36" Long, 2-1/2" I.D., Straight Coupling, Black female to male connections.
Requires O-ring or crush
Hump Hose Couplings washer (not included) on female side.
Four-ply silicone couplings are all 3" long and available in
a variety of inside diameters.
Part No. Description
VIB2729 1-1/2"" Hump Coupling
VIB2732 2-1/2" Hump Coupling
VIB2734 3" Hump Coupling
VIB2735 3-1/2" Hump Coupling
VIB2736 4" Hump Coupling

522 2023 - 2024 HOT ROD AND EARLY MUSCLE

Exhaust Hose Cutting Shears
Resonators VIB2989
304 stainless steel
resonators help improve
exhaust sound. VIB1140
Overall
Part No. Description Inlet Outlet Body Size
Length
Bottle Style Heavy-duty shears designed to provide clean cuts on
VIB1792 2-1/2” 2-1/2” 18” 4” dia.
Resonator
Vibrant braided and non-braided flex hoses from -3AN to
Ultra Quiet
VIB1140
Resonator
2-1/2” 2-1/2” 13-3/4” 6-1/2” x 4-3/4” -20AN. Steel with rubberized handles.
Ultra Quiet
VIB1141 2-1/2” 2-1/2” 13-3/4” 6-1/2” x 4-3/4”
Resonator Oil Restrictor Fitting Kit
Ultra Quiet
VIB1142
Resonator
3” 3” 13-3/4” 6-1/2” x 4-3/4” VIB10289
Limit oil flow to turbo chargers or other
components where excessive oil flow
Streetpower Flat Black could cause damage to seals and
parts. Kit includes aluminum
Stainless Steel Mufflers fitting with -4AN male
A stealthy look ends and 1/8"NPT inner
combined with threads, two stainless
a “true straight- steel restrictor jets
through” oval (0.030" and 0.45";
design makes fitting without jets is
these mufflers a great 0.060"), Allen key, and
option for performance Loctite.
street cars. Generates a
low, deep tone while providing
unrestricted flow for maximum Aluminum Oil Flange
horsepower. Stainless steel with flat black finish and for Garret GT32-55R Turbos
angle-cut tip.
VIB2853
Part No. Inlet I.D. Tip O.D. Length Overall Length Body Size Machined from
VIB1146 2-1/2” 3” 15” 20” 9” x 5”
billet 6061
aluminum, oil
Quick Disconnect flange features a
EFI Adapter Fitting 1/2”NPT female
port. Mounting
VIB16886 hardware included.
Black anodized aluminum quick
disconnect features -6AN male threads
and fits a 3/8" hose. Turbo Oil Drain Flange
VIB2889
Male Straight Fitting for 1/4" OD Tubing Designed for
use with GT25R,
VIB2664 GT28R, GT30R, and
Stainless steel fitting features T35R Ball Bearing
PTFE-coated 1/4”NPT threads. Turbochargers, this
Fits 1/4" tubing. flange is machined
from billet 6061
Male 90° Elbow Fitting for aluminum and features a 1/2”NPT female port. Includes
1/4" O.D. Tubing M8x1.25 bolts.
VIB2669
Plastic and stainless
Weld-On Radiator Filler Neck
steel fitting that features VIB20980
PTFE-coated 1/4" NPT Aluminum filler neck is
threads. Fits 1/4" tubing. designed to be welded into
place and features a 1-1/4”
I.D. threaded opening as
well as a standard 5/16”
barbed fitting for overflow
hose. Black anodized
aluminum radiator cap
(VIB20981) sold separately.

2023 - 2024 HOT ROD AND EARLY MUSCLE 523

Black Synthetic Rubber/Nylon Braided Flex Synthetic
Hose Rubber/Nylon
Braided Flex Hose
Lightweight, durable
synthetic rubber/
nylon hose is fully compatible with oil, water, coolant,
and fuel, including E85. Capable of handling operating
temperatures from -40° to 300°F and elevated pressures
Lightweight and durable synthetic rubber/nylon up to 500 PSI.
hose is fully compatible with oil, water, coolant, and
fuel, including E85. Capable of handling operating Hose 2' Length 5' Length 10' Length 20' Length
Size Part No. Part No. Part No. Part No.
temperatures from -40° to 300°F and pressures up to Black Hose
500 PSI. -4 VIB11954 VIB11984 VIB11964 VIB11974
-6 VIB11956 VIB11986 VIB11966 VIB11976
10' Length 20' Length -8 VIB11958 VIB11988 VIB11968 VIB11978
Hose Size I.D. -10 VIB11960 VIB11990 VIB11970 VIB11980
Part No. Part No.
-4AN 0.22" VIB11964 VIB11974 -12 VIB11962 VIB11992 VIB11972 VIB11982
-6AN 0.34" VIB11966 VIB11976 -16 VIB11963 VIB11993 VIB11973 VIB11983
-8AN 0.44" VIB11968 VIB11978 -20 VIB11965 VIB11995 VIB11975 VIB11985
-10AN 0.56" VIB11970 VIB11980 Black Hose with Red Tracer
-12AN 0.68" VIB11972 VIB11982 -4 — VIB11984R VIB11964R —
-16AN 0.89" VIB11973 VIB11983 -6 VIB11956R VIB11986R VIB11966R VIB11976R
-20AN 1.125" VIB11975 VIB11985 -8 — VIB11988R VIB11968R VIB11978R
-10 — VIB11990R VIB11970R VIB11980R
Stainless Steel Braided Flex Hose -12 — VIB11992R VIB11972R VIB11982R
Black Hose with Blue Tracer
with PTFE Liner -4 — — VIB11964B VIB11974B
-6 — VIB11986B VIB11966B VIB11976B
-8 — VIB11988B VIB11968B VIB11978B
-10 — VIB11990B VIB11970B VIB11980B
-12 — VIB11992B — VIB11982B

Durable braided T300 stainless steel hose is fully Swivel End Hose End Fittings
compatible with oil, water, coolant, and fuel, including
E85. Capable of handling operating temperatures from
-40° to 300°F and pressures up to 1000 PSI. 10' Length
20' Length Black anodized aluminum fittings feature threaded AN
10' Length 20' Length connectors on the both ends.
Hose Size I.D. Part No. Part No. AN Size Straight 45° Elbow 90° Elbow
-4AN 0.22" VIB11914 VIB11924 -4AN VIB21004 VIB21404 VIB21904
-6AN 0.34" VIB11916 VIB11926 -6AN VIB21006 VIB21406 VIB21906
-8AN 0.44" VIB11918 VIB11928 -8AN VIB21008 VIB21408 VIB21908
-10AN 0.56” VIB11920 VIB11930 -10AN VIB21010 VIB21410 VIB21910
-12AN 0.68” VIB11922 VIB11932 -12AN VIB21012 VIB21412 VIB21912
-16AN 0.89” VIB11923 VIB11933 -16AN VIB21016 VIB21416 VIB21916
-20AN VIB21020 VIB21420 VIB21920

Tube to AN Adapter Fittings

Black anodized aluminum
fittings feature a tube fitting
with brass olive insert on
one end, and a threaded AN
Banjo Fittings connector on the other.
Part No. Description Tube
AN Size Female AN Male AN
VIB11515 Male Banjo Assembly, -4AN Banjo x M12 x 1.5 Bolt, Aluminum Size
VIB11523 Male Banjo Assembly, -6AN Banjo x M12 x 1.5 Bolt, Aluminum -6AN 5/16" VIB16445 VIB16455
VIB11524 Male Banjo Assembly, -6AN Banjo x M14 x 1.5 Bolt, Aluminum -6AN 3/8" VIB16446 VIB16456
VIB11525 Male Banjo Assembly, -6AN Banjo x M16 x 1.5 Bolt, Aluminum -8AN 1/2" VIB16448 VIB16458
VIB11535 Male Banjo Assembly, -8AN Banjo x M16 x 1.5 Bolt, Aluminum

524 2023 - 2024 HOT ROD AND EARLY MUSCLE

AN Flare to AN Straight Cut Fittings
Adapter Fittings (Male to Male) Anodized aluminum fittings
Black anodized aluminum fittings allow for easy
conversion from flared AN to straight-cut ORB Straight Aluminum Flare
connections. O-ring included. to Pipe Adapters
AN Size ORB Size Part No. AN Size NPT Size Straight Material
-4AN -6AN VIB16822 -3AN 1/8" VIB10290 Steel
-6AN -6AN VIB16826 -3AN 1/8" VIB10291 Black Anodized Aluminum
-6AN -8AN VIB16827 -4AN 1/8" VIB10292 Steel
-6AN -10AN VIB16828 -4AN 1/4" VIB10216 Black Anodized Aluminum
-8AN -6AN VIB16830 -4AN 1/8" VIB10293 Black Anodized Aluminum
-8AN -8AN VIB16831 -4AN 3/8" VIB10213 Black Anodized Aluminum
-8AN -10AN VIB16832 -6AN 1/8" VIB10217 Black Anodized Aluminum
-8AN -12AN VIB16833 -6AN 1/4" VIB10220 Black Anodized Aluminum
-10AN -6AN VIB16834 -6AN 3/8" VIB10222 Black Anodized Aluminum
-10AN -8AN VIB16835 -6AN 1/2" VIB10218 Black Anodized Aluminum
-10AN -10AN VIB16836 -8AN 3/8" VIB10221 Black Anodized Aluminum
-10AN -12AN VIB16837 -10AN 3/8” VIB10223 Black Anodized Aluminum
-12AN -10AN VIB16840 -10AN 1/2" VIB10294 Black Anodized Aluminum
-12AN -12AN VIB16841 -12AN ¾” VIB10224 Black Anodized Aluminum
-20AN 1" VIB10179 Black Anodized Aluminum
Push-On Hose End Fittings -20AN 1-1/4" VIB10207 Black Anodized Aluminum
Black anodized aluminum fittings are perfect for use with
Vibrant’s braided flex hose, with a barbed fitting on one
end and threaded AN fitting on
the other.
AN Size Straight 90° Elbow
-4AN VIB22004 VIB22904
-6AN VIB22006 VIB22906
-8AN VIB22008 VIB22908
-10AN VIB22010 VIB22910
-12AN VIB22012 VIB22912

142 Legend
American Muscle Aluminum Wheel
Wheels 141 Legend VIS142-2983C20
Aluminum Wheels Cast aluminum 142 Legend
wheels feature a six-spoke
Manufactured from durable
design. Chrome center with
cast aluminum, wheels
machined lip.
feature a five-spoke design
in chrome or with a gunmetal Bolt Back
Size Circle Spacing
center and machined rim.
Bolt Back 20" x 9" 6 x 5-1/2" 6"
Part No. Size Circle Spacing
Gunmetal
VIS141H5761GM6 15" x 7" 5 x 4-3/4" 4-1/4"
VIS141H5761GM-7 15" x 7" 5 x 4-3/4" 3-3/4"
VIS141H5765GM6 15" x 7" 5 x 4-1/2" 4-1/4"
VIS141H5861GM0 15" x 8" 5 x 4-3/4" 4-1/2" 143 Torque Series
VIS141H5861GM-19
VIS141H5873GM-19
15" x 8"
5" x 8"
5 x 4-3/4"
5 x 5"
3-3/4"
3-3/4"
Aluminum Wheel
VIS141H7883GM0 17" x 8" 6 x 5-1/2" 4-1/2" VIS143-8861GMML-6
VIS141H7883GM19 17" x 8" 6 x 5-1/2 5-1/4" Torque Series cast aluminum
Chrome wheel features an attractive
VIS141H7883C0 17" x 8" 6 x 5-1/2" 4-1/2" gunmetal finish.
VIS141H7883C19 17" x 8" 6 x 5-1/2" 5-1/4"
Bolt Back
Size Circle Spacing
18" x 8-1/2" 5 x 4-3/4" 4-1/2"

2023 - 2024 HOT ROD AND EARLY MUSCLE 525

521 Nitro Series 55 Rally Series
Polished Aluminum Silver Steel Wheels
Silver painted 15" steel
Wheels wheels are offered in a
Manufactured from brilliantly variety of different sizes and
polished cast aluminum, 521 back spacing. Center cap
Nitro Series wheels feature a sold separately.
classic star design.
Bolt Back
Bolt Back Part No. Size Circle Spacing
Part No. Size Circle Spacing VIS55-5461 15" x 4" 5 x 4-3/4" 2-1/2"
VIS521H5461P-19 15" x 4" 5 x 4-3/4" 1-3/4" VIS55-5504 15" x 5" 5 x 4-1/2"/4-3/4" 3-1/4"
VIS521H5465P-19 15" x 4" 5 x 4-1/2" 1-3/4" VIS55-5604 15" x 6" 5 x 4-1/2"/4-3/4" 4"
VIS521H5761P0 15" x 7" 5 x 4-3/4" 4" VIS55-5661 15" x 6" 5 x 4-3/4" 4"
VIS521H5861P0 15" x 8" 5 x 4-3/4" 4-1/2" VIS55-5704 15" x 7" 5 x 4-1/2"/4-3/4" 4-1/4"
VIS55-5761 15" x 7" 5 x 4-3/4" 4-1/4"
VIS55-5773 15" x 7" 5 x 5" 4-1/4"
VIS55-5783 15" x 7" 6 x 5-1/2" 4-1/4"
VIS55-5804 15" x 8" 5 x 4-1/2"/4-3/4" 4-1/4"
VIS55-5861 15" x 8" 5 x 4-3/4" 4-1/4"
VIS55-5873 15" x 8" 5 x 5" 4-1/4"
561 Sport Mag Series VIS55-5883 15" x 8" 6 x 5-1/2" 4"
Aluminum Wheel
VIS561-5461B-19
The cast aluminum Sport Mag
series is offered in
black only. Rally Series
Bolt Back “Power Disc Brakes”
Size
15" x 4" Wheel
Circle
5 x 4-3/4"
Spacing
1-3/4"
Snap-On Center Cap
VISJC5001-V
Chrome-plated steel 8-1/4" dia.
center cap with "Power Disc
Brakes" branding.
571 Sport Star II
Aluminum Wheels
Cast aluminum, five-spoke
571 Sport Star II wheels are Police Style
offered with choice of black Snap-On Center Cap
or polished finish.
VIS2531-V
Bolt Back
Part No. Size Circle Spacing Chrome-plated stainless steel
Black center cap has an 8-1/8" dia.
VIS571-5461B-19 15" x 4" 5 x 4-3/4" 1-3/4"
VIS571-5465B-19 15" x 4" 5 x 4-1/2" 1-3/4"
VIS571-5861B0 15" x 8" 5 x 4-3/4" 4-1/2"
VIS571-5865B27 15" x 8" 5 x 4-1/2" 5-1/2"
VIS571-7461B-24 17" x 4-1/2" 5 x 4-3/4" 1-3/4"
Polished Rally Series Snap-On
VIS571-5461P-19 15" x 4" 5 x 4-3/4" 1-3/4" Center Caps
Plastic Rally Series center caps
have a 9.5" dia. and attach to
most popular 15" wheels.
15" Stainless Steel Trim Rings Part No. Description
Often used to accompany snap-on center Rally Series
VISJC5023-V
caps, polished stainless steel trim rings fit Center Cap
15" wheels. VISJC5023V-S
Rally Series
Center Cap, Short
Part No. Description
VIS2503-V 15" Trim Ring, 2" Wide
VIS2533-V 15" Trim Ring, 2-1/2" Wide
VIS2543-V 15" Trim Ring, 3" Wide Rally Series
Spinner Snap-On
Center Cap
VISJC5007-V
Spinner-style chrome-plated
steel center cap has a 8.2" dia.

526 2023 - 2024 HOT ROD AND EARLY MUSCLE

55 Rally Series 57 Rally Series Chrome-
Aluminum Wheels Plated Steel Wheels
Gunmetal-finished aluminum Classic appearing, 57 Rally
wheels feature the classic, Rally series steel wheels feature a
design in modern 17" x 8" sizing. bright chrome-plated finish.
Center cap sold separately. Center cap sold separately.
Bolt Back Bolt Back
Part No. Size Circle Spacing Part No. Size Circle Spacing
VIS55-7883GMML0 17" x 8" 6 x 5-1/2" 4-1/2" VIS57-5704 15" x 7" 5 x 4-1/2"/4-3/4" 4-1/4"
VIS55-7806GMML0 17" x 8" 5 x 4-3/4"/5" 4-1/2" VIS57-5761 15" x 7" 5 x 4-3/4" 4-1/4"
VIS57-5804 15" x 8" 5 x 4-1/2"/4-3/4" 4-1/4"
VIS57-5861 15" x 8" 5 x 4-3/4" 4-1/4"
VIS57-5873 15" x 8" 5 x 5" 4-1/4"

255 LPH Universal In-Tank Fuel Pump Universal In-Tank Fuel Pump
Walbro GSS340 Series, 255 LPH universal Ideal for high-performance street and
in-tank high pressure fuel pumps race applications. Installs directly into
are ideal for high-performance the stock fuel pump brackets in the
street and race applications. gas tank and includes all necessary
Installs directly into the stock fuel installation parts and hardware. The
pump brackets in the gas tank and includes all necessary 190 LPH supports 350+ horsepower and
installation parts and hardware. Supports up to 500+ the 255 LPH supports 550+ horsepower
horsepower naturally aspirated. naturally aspirated applications.
Part No. Description Part No. Description
WFPGSS340G3 Fuel Pump with Large Centered Round Inlet, Each WFPF20000141 190 LPH, Each
WFPGSS341G3 Fuel Pump with Fixed Inlet, Each WFPGSS343G3 255 LPH, Each
WFPGSS342G3 Fuel Pump with Fixed Inlet, Each

400 LPH High-Performance

E85/Flex Fuel
In-Tank Fuel Pump
High-Performance
In-Tank Fuel Pump WFPF90000262
High-flow fuel pump is designed for
WFPF90000267 engines with more than 500 HP. Requires
Universal E85/Flex fuel pump outperforms modifications to wiring, fuel lines, and fuel
all current market in-tank fuel pumps on the market. All module.
internals have been validated to OEM specs for approved
use in E85/flex fuel applications. High-pressure, high-
flow performance pump supports 500+ horsepower.

Direct-Fit Fuel Pumps

Part No. Description
WFPGCA758 1985-92 Camaro 5.0/5.7L, 1985-92 Corvette 5.7L
WFPGCA719 11/1984-92 Mustang 5.0L, 255 LPH @ 50 PSI with Max. System Pressure 50 PSI
WFPGCA759 1/1984-92 Mustang 5.0L, 255 LPH @ 50 PSI with Max. System Pressure 87 PSI
WFP5CA249 1985-92 Mustang 5.0L, 155 LPH Stock Replacement
WFPGCA710 11/1984-92 Mustang 3.8L, 255 LPH @ 50 PSI with Max. System Pressure 50 PSI
WFPGCA758 1985-92 Firebird 5.0L/5.7L

2023 - 2024 HOT ROD AND EARLY MUSCLE 527

6-71 Supercharger Kits
for Small Block Chevy X-CELerator Intake
262-400 Manifolds
X-CELerator 360° single-
WEI7582P plane intakes are ideal
Make horsepower in a for street or drag use.
hurry with a Weiand 6-71 They operate well in
Supercharger. Kits include 2000 to 6500 RPM range
polished blowers, manifolds, and and should be used with
3" wide street drive assemblies. Part higher compression
number WEI7582P has a 10.5% underdrive. ratios, aftermarket camshafts, headers, standard
transmissions, or high-stall converter- equipped
Dual Quad automatic transmissions.
Carburetor Linkage Satin
Part No. Description Recommended
RPM Range
WEI7166 Small Block Chevrolet
For use with side-mounted WEI7547-1 X-CELerator 2000-6500
Holley 4- barrel carburetor on Ford 351C
WEI7516 X-CELerator, 2V Heads 1500-7000
superchargers or tunnel ram
applications.
Action Plus Intake
Manifolds
Action Plus Water Pumps Action Plus is a dual-plane,
Weiand's aluminum mechanical water pumps are 30-50% 180° intake that replaces
lighter than stock cast-iron pumps. All pumps feature stock manifold and will
heavy-duty shafts with 5/8" pilots. Action Plus water increase power and torque
pumps use high-quality, heavy-duty, precision bearings from idle to 6000 RPM.
with twice the load capacity of most stock pumps. Satin Polished Recommended
Part No. Part No. Description RPM Range
Small Block Chevrolet
Chevy Short Water Pumps Action Plus-Use with
WEI8120† WEI8120P† Idle-5500
Part No. Description Alum. Heads 1987-Up
Chevrolet Small Block V8 and 90° V6 Ford 351M, 400
WEI9208 Aluminum Water Pump, Satin WEI8010 — Action Plus, 2V Heads Idle-5500
Aluminum Water Pump, † Square Carb Mounting Flange
WEI9208P
Polished
Chevrolet Big Block
WEI9212 Aluminum Water Pump, Satin Classic Style Finned Aluminum
WEI9212P
Aluminum Water Pump, Oil Pan Kits
Polished
Available for a number of
Chevy and Ford applications,
Chevy Long Water Pumps Weiand finned oil pans
Part No. Description provide a classic retro look
Chevrolet Small Block V8 and 90° V6 while helping to lower engine
WEI9240 Aluminum Water Pump, Satin oil temperatures for longer engine
WEI9240P Aluminum Water Pump, Polished
life. Produced in a polished or black
Chevrolet Big Block
powder-coated finish, these application-
WEI9242 Aluminum Water Pump, Satin
WEI9242P Aluminum Water Pump, Polished
specific four-quart oil pans include a
matching gasket, pickup tube, and mounting hardware.
Finned Aluminum Four-Quart Oil Pan Kits
Application Polished Black
1965-87 Small-Block Ford WEI6524FWND WEI6024FWND
1958-79 Small Block Chevy WEI6500FWND —
1980-85 Small Block Chevy WEI6504FWND —
1986-2002 Small Block Chevy WEI6502FWND —
1965-90 Big Block Chevy Gen 4 WEI6532FWND —

528 2023 - 2024 HOT ROD AND EARLY MUSCLE

Street Warrior Intake Manifolds Stealth
The all new Street Warrior intakes Intake
deliver brutal low-end torque
and horsepower Manifolds
throughout the usable The Stealth series represents a
RPM range. With the totally new generation of 180° dual-
popularity of longer plane intake manifolds engineered to
stroke engines and more combine the high idle to 6,800 RPM power
efficient cylinder head and of a single-plane manifold with the sharp
cam designs, a new intake throttle response and versatility of a dual plane.
manifold was in order. Designed with Computational Fluid Satin Polished Recommended
Dynamics software, the Street Warrior intakes deliver Part No. Part No. Description RPM Range
Small Block Chevrolet
the performance to conquer the competition. Satin
WEI8150† WEI8150P† Stealth Idle-6800
versions are available for early and later design small Big Block Chevrolet
block Chevys. WEI8018 — Stealth, Rect. Port Idle-6800
Part No. Description WEI8019 — Stealth, Oval Port Idle-6800
Chevrolet Small Block Small Block Ford 221, 260, 289, 302W
WEI8125 Square/Spread Bore, Satin (5.0L, 1983-Up)
Square/Spread Bore (Late) WEI8020 — Stealth Idle-6800
WEI8126
With 1987 And Later Cast Iron Heads, Satin Small Block Ford 351W
Chevrolet Big Block WEI8023 — Stealth Idle-6800
WEI8122 Peanut Port, Square/Spread Bore, Satin Big Block Ford 429, 460
WEI8123 Oval Port, Square/Spread Bore, Satin WEI8012 — Stealth Idle-6800
Stealth,
WEI8021 — Idle-6800
Fits CJ, SCJ Heads
Small Block Chrysler 318 (Late), 340, 360
WEI8022 — Stealth Idle-6800
† Square carb mounting flange.

Rodlite
Draglite Capture the tradition of the 50s
with the unique style of the Rodlite
The Draglite, a strong, lightweight cold-
forged wheels. This wheel is a
forged aluminum wheel with minimal
perfect choice for any vehicle,
runout, is the most popular wheel in drag
from the twenties up through
racing and is also an excellent choice for
the late models. Center caps are
street machines. Center cap is included with
included with all wheels.
all wheels.
Part No. Size Bolt Circle Backspacing
Part No. Size Bolt Circle Backspacing WEL93-54342 15" x 4" 5 x 4-1/2"/5 x 4-3/4" 1-7/8"
WEL90-54342 15" x 4" 5 x 4-1/2", 5 x 4-3/4" 2-1/4"
WEL90-55346 15" x 5" 5 x 4-1/2", 5 x 4-3/4" 3-1/2"
WEL90-56346 15" x 6" 5 x 4-1/2", 5 x 4-3/4" 3-1/2" Pro Star
WEL90-57346 15" x 7" 5 x 4-1/2", 5 x 4-3/4" 3-1/2" The Pro Star is a cold-forged,
WEL90-57348 15" x 7" 5 x 4-1/2", 5 x 4-3/4" 4-1/2" precision-crafted, lightweight
WEL90-58346 15" x 8" 5 x 4-1/2", 5 x 4-3/4" 3-1/2" aluminum wheel with superior
WEL90-58348 15" x 8" 5 x 4-1/2", 5 x 4-3/4" 4-1/2" strength. Brilliantly polished,
WEL90-58350 15" x 8" 5 x 4-1/2", 5 x 4-3/4" 5-1/2" the Pro Star is one of the truest
performance wheels on the market.
Center caps are included with all wheels.
Part No. Size Bolt Circle Backspacing
WEL96-54272 15" x 4" 5 x 4-3/4" 2-1/4"
WEL96-55206 15" x 5" 5 x 4-1/2" 3-1/2"
WEL96-55276 15" x 5" 5 x 4-3/4" 3-1/2"
Center Caps and Lug Nuts WEL96-56276 15" x 6" 5 x 4-3/4" 3-1/2"
Part No. Description WEL96-57208 15" x 7" 5 x 4-1/2" 4-1/2"
WELP605-5073 RT Series Polished Cap WEL96-57276 15" x 7" 5 x 4-3/4" 3-1/2"
Aluminum Push through Cap WEL96-57278 15" x 7" 5 x 4-3/4" 4-1/2"
WELP605-5083 WEL96-58208 15" x 8" 5 x 4-1/2" 4-1/2"
Fits All 5 Lug Drag/Street Wheels (3.175" Dia.)
Chrome 7/16" RH Closed End Lug Nuts WEL96-58210 15" x 8" 5 x 4-1/2" 5-1/2"
WEL601-1414 WEL96-58276 15" x 8" 5 x 4-3/4" 3-1/2"
with Washers, 4-Pack
Chrome 1/2" RH Closed End Lug Nuts WEL96-58278 15" x 8" 5 x 4-3/4" 4-1/2"
WEL601-1416
with Washers, 4-Pack WEL96-58280 15" x 8" 5 x 4-3/4" 5-1/2"

2023 - 2024 HOT ROD AND EARLY MUSCLE 529

Tandem Master Cylinder Aluminum Tandem
For manual four-wheel Master Cylinder with
discs,tandem outlet master
cylinders are high-pressure die-cast
Bracket and Valve WIL261-13271-BK

for lightweight, great looks, and strength. Package includes aluminum tandem master cylinder with
A slotted mounting flange accommodates bolt combination proportioning valve, mounting bracket, fluid
hole centers from 3.22" and 3.40" and can easily tubes and hardware in a ready-to-install kit. Offered with
be adapted to many stock setups including Chrysler and choice of bare, black E-coat, or media-burnished finished
GM. Master cylinders are available in standard and bright master cylinder.
finishes with through-hole mounts on 6.40" centers Part No. Description
for side mounting. Fluid outlets on both sides simplify WIL261-13271 7/8" Bore Master Cylinder Package, Bare
plumbing. Choose 1.00" or 1.12" bore sizes. WIL261-13271-BK 7/8" Bore Master Cylinder Package, Black E-Coat
WIL261-13271-P 7/8" Bore Master Cylinder Package, Media Burnished
Part No. Description WIL261-13269 1" Bore Master Cylinder Package, Bare
WIL260-8555 1.00" Bore, Dual, Standard Finish WIL261-13269-BK 1" Bore Master Cylinder Package, Black E-Coat
WIL260-8556 1.12" Bore, Dual, Standard Finish WIL261-13269-P 1" Bore Master Cylinder Package, Media Burnished
WIL260-8555-P 1.00" Bore, Dual, Bright Finish WIL261-13270 1-1/8" Bore Master Cylinder Package, Bare
WIL260-8556-P 1.12" Bore, Dual, Bright Finish WIL261-13270-BK 1-1/8" Bore Master Cylinder Package, Black E-Coat
WIL261-13270-P 1-1/8" Bore Master Cylinder Package, Media Burnished
Proportioning Valve WIL260-13375 Die Cast, .9375" Dia. Bore, Manual with Rod Assembly
WIL260-13375-BK Die Cast, .9375" Dia. Bore, Manual with Rod Assembly, Black
WIL260-8419 WIL260-8556-BK Die Cast, 1.25" Dia. Bore, Black
Knurled knob offers precise Die Cast, .9375" Dia. Bore,
WIL261-13626
adjustments from 100 to 1,000 Includes Proportioning Valve and Bracket
PSI and a 57% reduction in line WIL261-13626-BK
Die Cast, .9375" Dia. Bore,
pressure. Compact, lightweight Includes Prop. Valve and Bracket, Black
anodized aluminum housing has dual mounting Related Components
holes to ease installation. Adjust front to rear or single Proportioning Valve Mounting Bracket
WIL220-13189
for Tandem Master Cylinder
wheel brake bias. Proportioning Valve with Tandem Master Cylinder Mounting
WIL260-13190
Bracket

Flexline Kit Compact Remote Combination

Wilwood recommends use of Master Cylinder Kits
the stainless steel flexline kit to For applications where space is at a premium, 3.37"
replace OEM rubber brake hoses when compact master cylinders offer the capacity of a full size
installing their disc brakes. Kits fit specific disc unit. Sold complete with reservoirs, clamps and required
conversions. Fittings are 3/8"-24 to 90°. hardware.
Part No. Description
Part No. Description
WIL220-7699 Universal/1955-57 Chevy Front
WIL260-10371 5/8" Bore
WIL220-10632 1965-82 Corvette Rear
WIL260-10372 3/4" Bore
WIL220-6471 1987-93 Mustang Front
WIL260-10373 13/16" Bore
WIL220-7056 1967-72 Camaro/Nova Front
WIL260-10374 7/8" Bore
WIL260-10375 1" Bore
WIL260-10376 1-1/8" Bore

Forged Dynalite Pro Series Front Brake Kits

The complete disc brake upgrade kits for American muscle cars and street rods. Pro
Series FDL kits feature forged billet Dynalite calipers, versatile enough for the daily driver,
performance car, or show vehicle. Kits offer ample clearance inside of most popular 15"
wheels and are compatible with manual or power-style master cylinders. Sold complete with
black powder-coated (unless noted) calipers, vented rotors, billet aluminum hubs, caliper
brackets, and all required hardware. Choose from kits with standard or drilled rotors.
Standard Kit Kit with Drilled Rotors
Application Part No. Part No.
1970-78 Camaro/Firebird, 11" Dia. Rotors WIL140-11007 WIL140-11007-D
1980-87 GM G-Body, 11" Dia. Rotors WIL140-11009 WIL140-11009-D
1937-48 Ford, 11" Dia. Rotors WIL140-11013 —
1965-69 Mustang, 11" Dia. Rotors WIL140-11071 —
1970-73 Mustang, 11" Dia. Rotors WIL140-11073 —
1974-78 Mustang, 11" Dia. Rotors WIL140-11017 WIL140-11017-D
1987-93 Mustang, 11" Dia. Rotors WIL140-11018 WIL140-11018-D
1962-67 Chrysler B/E-Body, Drum, 11" Dia. Rotors WIL140-11020 WIL140-11020-D
1970-72 Chrysler B/E-Body, Disc, 11" Dia. Rotors — WIL140-11021-D
1965-72 Chrysler A-Body, 10" Drum, 11" Dia. Rotors WIL140-11023 —
1973-80 Chrysler/1973-76 A/1973-74 B/1973-80 F, 11" Dia. Rotors — WIL140-11019-D
* Signifies kit with polished calipers.

530 2023 - 2024 HOT ROD AND EARLY MUSCLE

Classic Series Dynalite Front Brake Kit
Designed to fit many OEM drum or disc spindles, these kits include FDLI or FDL-M four-piston aluminum
calipers and 11” to 11-7/8” one-piece rotors. The time-proven FDL-M caliper provides the most wheel
clearance of any four-piston caliper in its size class, and the one-piece cast iron rotors with integrated
hubs allow for easy installation and excellent wear resistance. Suitable for daily drivers or show cars,
these kits will fit the intended applications with no modifications, and will clear most 14”-15” OEM or aftermarket disc brake
wheels. Calipers work with manual or power boosted master cylinders, and includes calipers, pads, rotors, brackets,
hardware, and detailed installation instructions. Note: Kit will not work with most OEM drum brake wheels.
Part No. Description Application
WIL140-15272 Dynalite Front Brake Kit 1967-69 Camaro, 1964-72 Chevy II/Nova
WIL140-13476-D Dynalite Front Brake Kit 1965-66 V8 Mustangs, all 1967-69 Mustangs

Forged Dynalite Big Brake Forged Narrow Superlite 6R

Front Brake Kits Big Brake Front Brake Kit
FDL Big Brake front disc brake kits provide WIL140-12271-D
dramatic improvements in braking with the This six-piston caliper kit with 12.88"
addition of large, 12.19" diameter rotors and one-piece drilled and slotted rotors is
premium forged billet Dynalite calipers. specifically designed to fit 1967-72 GM
The perfect compliment to tire, wheel, and A-body cars. Built exclusively for 17"
suspension upgrades. Kit is sold complete with and larger wheels, the kit will enhance
black anodized (unless noted) calipers, vented rotors, any suspension or tire upgrade on custom, track, or
billet aluminum hubs, caliper brackets, brake pads, and street machines.
required hardware. Compatible with most 15" wheels.
Kit with Drilled
Application Standard Kit Rotors Forged Narrow Superlite 6R
Part No.
1967-69 Camaro/Firebird,
Part No.
Big Brake Front Kit
WIL140-7675 WIL140-7675-D
12.19" Dia. Rotors for Chevy/GMC C10
1979-81 Camaro/Firebird, Kit combines FNS six-piston calipers
— WIL140-9053-D
12.19" Dia. Rotors
with 13.06" dia. drilled rotors for superior
1965-69 Mustang, 12.19" Dia. Rotors WIL140-11072 WIL140-11072-D
braking. Kit includes calipers, drilled
1965-69 Mustang,
12.19" Dia. Rotors, Red Calipers
— WIL140-11072-DR rotors, mounting hat, and necessary
1974-78 Mustang II, hardware.
— WIL140-10440-BD
12.19" Dia. Rotors
1980-87 GM "G" Body,
12.19" Dia. Rotors
— WIL140-12297-DR Dynapro 6 Big Brake
1959-64 Impala, 1963-64 Corvette — WIL140-12459-DR Front Brake Kit
WIL140-10510-D
Big Brake Front Brake Kit Disc brake kit uses premium, billet
WIL140-9803-D aluminum Dynapro calipers and
Kit provides the ultimate in braking and large 12.19" diameter rotors to deliver
style with extra-large, 13" diameter vented superior braking. Compatible with
and drilled rotors. Designed for cars most popular 15" wheels, kit is sold
fitted with 17" and larger wheels, kit is well complete with black anodized calipers,
suited to dual-purpose street and track vented and drilled rotors, billet aluminum hubs, caliper
applications. Sold complete with billet brackets, brake pads, and required hardware.
aluminum black anodized calipers, rotors,
caliper brackets, billet aluminum hubs, brake pads, and Forged DynaPro 6 Big Brake
required hardware. Front Brake Kits
Maximize the braking performance of
Forged Narrow Superlite 4R Big 1980-87 GM "G"-body, while allowing
Brake Front Kit for Chevy/GMC C10 compatibility with a wide range of
Kit delivers exceptional braking qualities to tire, wheel, and suspension upgrades.
popular trucks and SUV’s, while remaining Kit includes DynaPro 6-piston forged
compatible with OE master cylinder and ABS billet calipers along with drilled
functions. Includes four-piston calipers, 12.19" x .810" rotors, brake pads, and
rotors, mounting hat, and necessary necessary hardware. Choose from kits with black or red
hardware. powder-coated calipers.
Part No. Description Part No. Description
WIL140-15302-D Chevy/GMC C10 Brake Kit, Drilled Rotors WIL140-12837-D Black Calipers
Chevy/GMC C10 Brake Kit, WIL140-12837-DR Red Calipers
WIL140-15302-DR
Drilled Rotors/Red Calipers
WIL140-15302-R Chevy/GMC C10 Brake Kit, Red Calipers

2023 - 2024 HOT ROD AND EARLY MUSCLE 531

Forged Dynapro 6 Big Ford 2.36" Offset, One-Piece
Big Brake Vented Rear Parking Brake Kit
Front Brake Kits WIL140-7139-D
Rigid, forged billet six-piston The kit provides a complete solution
calipers are teamed with 12.19" for popular muscle car rear axles
dia. rotors to deliver exceptional that require a parking brake.
braking quality. Front disc brake Forged billet Dynalite four-piston
kits are sold complete with calipers, calipers, 12.19" one-piece drum/
rotors, brake pads, hubs, wheel bearings, and necessary rotors, and high-friction pads
hardware. provide optimized and balanced
Part No. Application braking for all types of custom
WIL140-10510 1967-69 Chevy Camaro/Pontiac Firebird performance street/strip and show
WIL140-10742-D 1974-78 Pinto/Mustang II, Drilled Rotors machines. The neatly hidden internal shoe system
provides a clean installation with superior static holding
Dynapro Low-Profile power for parking. Optional caliper finishes and rotor
designs enable the builder to personalize the style
Rear Parking Brake Kits and optimize brake performance for every individual
The solution for enthusiasts that application.
require a rear disc brake kit with
extra clearance for 14" to 15" wheels
and a parking brake. Kits feature Forged Dynalite Pro Series
forged billet Dynapro four-piston Rear Brake Kits
calipers with a special, low-profile Upgrade rear drum brakes to FDL
design. Each kit is sold complete Pro-Series disc brakes. Compatible
with black anodized calipers, 11.00" diameter vented and with most popular 15" wheels.
drilled rotors, brake hats, caliper brackets, brake pads, Designed for popular muscle car
and necessary hardware. applications not requiring parking
Part No. Description brakes, kits include black anodized
WIL140-11827-D
1957-62 Corvette, 1959-64 Chevy Impala (unless noted) billet aluminum
Rear Disc Brake Kit calipers, vented rotors, rotor hats,
WIL140-11387 Big Ford Rear Axle Disc Brake Kit With Parking Brake caliper brackets, brake pads, and
Big Ford Rear Axle Disc Brake Kit
WIL140-11387-D
With Parking Brake, Drilled Rotors
necessary hardware. Choose from kits with standard or
WIL140-11389-D New Style Ford, 2.50" Offset
drilled rotors.
WIL140-11386-D Chrysler, 8-3/4"Dana 60, 2.50" Offset Standard Kit Kit with Drilled Rotors
Application
WIL140-11398-D Chevy, 12-Bolt, 2-3/4" Axle Offset, Drilled Rotors Part No. Part No.
WIL140-11403 Ford, Small, 2-1/2" Offset, Standard Rotors Fits All 1959-64 Impala and
WIL140-2112-B WIL140-11828-DR
1957-62 Corvette
WIL140-11385 Chevy C-10 Truck, Standard Rotors
Chevy 12-Bolt, 2.81" Offset WIL140-2112-B WIL140-2112-BD
Chevy 12-Bolt, 2.81" Offset,
— WIL140-7141-DR
Red Calipers
Forged Dynalite Pro Series Front Brake Kit Chevy 12-Bolt, 2.81" Offset,
WIL140-5236-B —
Limited offset, C-Clip Eliminator
FDL Pro-Series Chevy 12-Bolt, 2.75" Offset,
— WIL140-9315-D
Drilled/Slotted Rotors
front-hub kit
Big Ford, 2.36" Offset WIL140-2115-B WIL140-2115-BD
for 1962-1972 Big Ford, 2.54" Offset WIL140-2114-B —
Dodge/Plymouth Big Ford, New Style,
A-body offers WIL140-2118-B WIL140-2118-BD
2.50" Offset
disc brake Chrysler, 8-3/4"/Dana 60,
WIL140-2116-B —
upgrade 2.72" Offset
solutions for OEM
9" drum brake
spindles. Kit uses a larger 11" rotor and forged aluminum Forged Narrow Superlite 4R
hub, narrows the track by only -.08" from the OEM brake Big Ford New Style
position. Suits the braking requirements of a daily driver,
serious competition, or the show enthusiast. Requires no Rear Parking Brake Kit
modifications, while providing clearance for popular 15" WIL140-10012-D
wheels. May be used with either manual or power brakes. Designed for popular muscle cars
Sold complete with calipers, rotor and hub assemblies, requiring a 2.50" offset axle and
brackets, and hardware. a parking brake this kit utilizes
Part No. Description 14" two-piece drilled and slotted
WIL140-11022-D With Black Caliper rotors, four-piston calipers, and
WIL140-11022-D With Red Caliper BP-10 compound pads.

532 2023 - 2024 HOT ROD AND EARLY MUSCLE

Forged Narrow Superlite 4R GM D52 Replacement Billet
Rear Disc Big Brake Kits Front Caliper Kits
Forged Narrow Superlite 4R rear The direct
disc kits provide the ultimate Big bolt-on factory
Brake solution for popular muscle replacement forged
car rear axles that require a billet aluminum
parking brake. FNSL4R four piston two piston caliper
calipers, 13" or 14" two-piece kits features D52
rotors, and high performance style BP-10 high
BP-10 compound pads provide friction brake
optimized and balanced braking pads, two-inch
to compliment front big brake diameter stainless
upgrades on all types of custom, show and high- steel pistons, and
performance street machines. The neatly hidden internal hardened slide pins. For use with
shoe system provides a clean installation with superior 1-1/4" wide rotor.
static holding power for parking. Part No. Description
Part No. Description WIL140-11290 Black Anodized
Big Ford, New Style, WIL140-11290-BK Black Powder Coated
WIL140-9219-D
2.50" Offset, Drilled/Slotted Rotors, Black Calipers WIL140-11290-R Red Powder Coated
Big Ford, New Style,
WIL140-9219-DR
2.50" Offset, Drilled/Slotted Rotors, Red Calipers
Chevrolet C10 ProSpindles
All-new, forged aluminum
Forged Dynalite modular spindle kits, designed
Rear Parking Brake Kits specifically for use with
FDL Pro-Series brake kits, Wilwood disc brake kits,
complete with parking brake, are provide a 2.50" drop for a more
a performance upgrade over OEM aggressive stance. Integrated
drum brakes. Kits combine forged hub accommodates both 5 x
billet Dynalite four-piston calipers 4.75" and 5 x 5.00" bolt circles. Direct mounting for radial
and 12.19" diameter vented rotors for caliper brackets offers a rigid platform for mounting.
optimized braking. Sold complete with Part No. Description
black anodized (unless noted) calipers, WIL831-14201 ProSpindles, 1963-70 C10
rotors, rotor hats, caliper brackets, brake pads, and WIL831-14202 ProSpindles, 1971-87 C10
required hardware. Choose from kits with standard or
drilled rotors. Master Cylinder
Standard Kit Kit with Drilled Fluid Reservoirs
Application Rotors
Part No. Part No. Attractive, billet aluminum master cylinder
Chevy C-10 Truck, 2.42" Offset WIL140-10094 WIL140-10094-DR fluid reservoirs are offered in direct or remote
GM 12-Bolt Chevy, 2.75" Offset — WIL140-7141-D mount versions. Sold complete with billet cap
GM 12-Bolt Chevy, 2.81" Offset — WIL140-7141-D and seal. 4-oz. reservoir.
Small Ford, 2.50" Offset — WIL140-9282-D
Part No. Description
Big Ford, 2.36" Offset WIL140-7139 WIL140-7139-D
Direct Mount Fluid Reservoir,
Big Ford, 2.50" Offset WIL140-7140 WIL140-7140-D WIL260-12696
for Compact Master Cylinder
Chrysler, 8-3/4" /Dana 60, WIL260-12697 Remote Mount Fluid Reservoir
— WIL140-10767-D
2.50" Offset

1965-82 Corvette Aluminum Tandem Master Cylinders

Replacement for Classic Mustangs
Designed for the
Caliper Kit manual brake
The forged application
billet aluminum 1964-72 Mustang.
replacement The cylinder bolts
calipers feature to the factory mount and
stainless steel has fluid outlet ports on both sides of the
pistons and bore. Machined from high-pressure die castings, these
high-temperature cylinders weigh only 3 pounds, 75% less than the OEM
seals. Prevents rust that plagues the OE caliper design. cylinder.
The calipers mount in the stock location and are DOT Part No. Description
compliant. The kit includes calipers, BP-10 brake pads, WIL260-12900 Aluminum
stainless steel brake lines, and mounting hardware. WIL260-12900-BK Black
Part No. Description
WIL140-10789 Front, Clear Anodized
WIL140-10790 Rear, Clear Anodized

2023 - 2024 HOT ROD AND EARLY MUSCLE 533

 Mystic Cut™
Smart Abrasive Technology™
Mist-N-Shine™ Detailer Compound
Quick and easy to use, non-streaking A fast-cutting compound formulated with
exterior detailer doesn't leave a dust or exclusive Smart Abrasive Technology™
film residue. Works well on any surface, for use on scratch-resistant, hard-to-buff
even in direct sunlight. Contains no medium- and high-solid clears and all
wax, silicone, or petroleum products. types of paint finishes. Contains no wax,
Sold each. silicone, or crystalline silica. Excellent for
Part No. Description removing swirls, fading, and water spots.
WIZ01214 22-oz. Spray Bottle Use with high-speed rotary, dual-action
WIZ01217 One-Gallon Bottle orbital polisher or by hand. Sold each.
Part No. Description
WIZ11038 8-oz. Bottle
Mystic Spray Wax™ WIZ11048 32-oz. Bottle
WIZ01235
Easy to apply and remove, this premium
wax is formulated not to leave any white Tire and Vinyl Shine™
residue or abrasive scratch marks. Will WIZ11055
remove dust, bugs, and fingerprints. Can be This multi-purpose dressing and
applied on chrome, plastics, and fiberglass. protectant for vinyl, leather, rubber, and
22-oz. spray bottle. Sold each. plastic surfaces leaves no greasy residue
and dries fast to a glossy finish.
22-oz. spray bottle. Sold each.
Metal Polish
WIZ11011
The magic is in the cloth! With
superior cutting action, Wizards Water Bandit™
metal polish-infused cloth will WIZ11066
remove tarnish, corrosion, brake All-purpose synthetic
dust, oxidation, and tar from chamois that absorbs
aluminum, chrome, stainless, water 3 times faster
copper, bronze, and magnesium. than an ordinary leather
Will not cake up or scratch metal chamois. Machine
finishes. 3-oz. container. Sold washable. Includes
each. storage case. 27" x 17".
Sold each.

Metal Renew™ Bug Release™

WIZ11020 WIZ11081
This easy-to-use, fast-cutting liquid metal Formulated to quickly soften bug residue
polish will restore, shine, and protect on all painted surfaces without damaging
most metal surfaces. Melts away rust, chrome, plastic, or painted surfaces. 22-
tarnish, and oxidation, leaving a high-gloss oz spray bottle. Sold each.
protective finish. Can be used by hand or
with power wheel. 8-oz. bottle. Sold each.

Shine Master™
WIZ11033
Developed to remove swirl marks, fine
scratches, and light oxidation. Can be
used as a cleaner, polish, and breathable
sealant to create a show quality gloss
with long term durability. Dries quickly,
buffs off easily, and leaves no greasy film
or powder residue. For use by hand or
machine. 16-oz. bottle. Sold each

534 2023 - 2024 HOT ROD AND EARLY MUSCLE

Metal Rescue
Rust Remover Bath
Metal Rescue is a non-hazardous, easy, safe, clean, and effective method of rust removal without any of
the normal health risks or environmental concerns. Easy to use: simply immerse rusty parts in the liquid
from five minutes to twenty-four hours based on the amount of rust, temperature of the liquid, and type
of steel. Metal Rescue removes the rust from the part and the rust becomes suspended in the solution.
Once rust is removed, simply rinse part off and dry, and the part is ready for use.
Part No. Description
WSH128-MR 1 Gallon
WSH5-MR 5 Gallon

Oil Filters Remote Mount Oil Filter Mounting Base

Wix racing oil filters utilize Used with an oil filter adapter, the
“glass-enhanced” cellulose remote-mounted base can filter
media to capture particles engine oil, transmission fluid,
as small as 10-12 microns, etc. Oil filter base includes three
removing up to 94% more dirt than traditional filters. mounting holes, dual 1/2"NPT
Filters have anti-drain back valve for street use. inlet and outlet ports, and
Thread By-Pass two 1/2"NPT plugs for blocking
Part No. Application Height Dia. Size Rate Flow off unused ports.
WIX51060R Chevy 5.170" 3.600" 13/16"-16 None 28 GPM
Part No. Description
WIX51515R Chrysler/Ford 5.170" 3.600" 3/4"-16 8-11 PSI 28 GPM
Remote Mounted Base, Accepts 3/4"-16 Filters
WIX24764
(Ford/Chrysler)
Chevy Spin-On Oil Filter Conversion Kit WIX24766 Remote Mounting Base, Accepts 13/16"-16 Filters (GM)

WIX24061
Popular mount is used to Racing Air Filters
convert 1956-67 Chevy V8s Racing air filter elements flow over 1,000 CFM without
from OEM canister-type to compromising filtering qualities. The Wix racing air filters
spin-on oil filter. Includes base, remove dirt, debris, and other contaminants before they
gasket, mounting bolts, and enter the engine, extending piston ring life.
instructions. Part No. Description
WIX46945R 14" Dia. x 3" Tall
WIX46926R 14" Dia. x 3-1/4" Tall
Oil Filter Adapters WIX46948R 14" Dia. x 3-1/2" Tall
Ideal where exhaust header-to- WIX46927R 14" Dia. x 3-3/4" Tall
oil filter clearance is an issue, WIX46944R 14" Dia. x 4" Tall
specialized adapters convert
engine mounted filters to a In-Line Fuel Filter
remote mounted base. Adapters High-flow in-line fuel filter
include 1/2"NPT female inlet and outlet ports. Oil lines assembly is 2-3/16" O.D.
must be purchased separately. x 11" long and includes a
Part No. Description replaceable 7 micron paper element. Compatible with
WIX24730 Oil Filter Adapter, 3/4"-16 Threads (Ford/Chrysler) gasoline or alcohol, filter has 3/4"NPT inlet and outlet
WIX24734 Oil Filter Adapter, 13/16"-16 Threads (GM) ports, and features a flow rate of 12 GPM.
Part No. Description
WIX24004 Replacement Element

Replacement Fuel Filter

WIX33900R
Paper element is a direct
replacement for the Fram HPGC1.
2023 - 2024 HOT ROD AND EARLY MUSCLE 535
120-Amp MIG Welder Magnetic Weld Positioning Clamp
WWFMIG-190 WWFWFMC
Flux-core wire machine requires Magnetic clamp holds parts at
no gas and is ideal for home virtually any angle for welding.
or light-duty industrial use. Steel clamp has 4-3/4" edges and
220-volt, single-phase electric requires no batteries or power.
welder includes solid-state
electronics housed within a sturdy metal cabinet. Sold Tube Straightener
complete with power source, MIG gun and 6' cable, ground
clamp and cable, spool of weld wire, and power cord. WWFTT100
Tube straightener
mounts to a work bench
Plasma Cutting Machine or clamped in a vise and
WWFPL500 straightens coiled tubing
Plasma cutter light-duty quickly using (5) easy
up to 1/2" thick mild steel. turning, 2-3/8" dia. non-
Incorporating solid-state marring Delrin wheels.
electronics into a sturdy Adjustable for use on
metal cabinet, the 220- 3/16" through 1/2" dia. round tubing.
volt, single-phase electric
unit features a 20-40 amp Pipe/Tube Bending Kit
current range and 60%
duty cycle. Includes hand torch with cable, ground cable WWFSPBENDKIT
with clamp, and power cord. Perform smooth, kink-free
bends to 3/8" through 7/8"
round and 3/4" or 1" square
90° Cast Iron tubing. Tool kit mounts to a
Welding Clamps bench top or clamps in a vise, and features an extension
Heavy-duty cast iron 90° clamps handle and threaded adjustment. Includes rugged cast
are designed to hold parts securely iron base, handle, and dies (3/8", 1/2", 9/16", 5/8", 3/4", and
during welding. Clamps include a 7/8" for round tubing, 3/4" and 1" for square tubing).
self-centering and swiveling rear
jaw that can hold items of varying 3-In-1 Bend-Roll-Shear
sizes. Offered in two sizes, clamps
feature machined surfaces and Machines
are assembled using copper-plate Acme screws for Versatile bench-top units are
durability. capable of bending, rolling,
or shearing up to 20-gauge
Part No. Description
WWFC-2.3 90° Welding Clamp, 2-3/8" Maximum Opening mild steel. Offered in 12" or
WWFC-4.0 90° Welding Clamp, 4" Maximum Opening 30" long versions, units use
1-1/2" diameter solid steel
rollers, while removable
fingers are used for box and
pan bending.
Part No. Description
WWFSP3-1-12 12" Long Bend-Roll-Shear Machine

536 2023 - 2024 HOT ROD AND EARLY MUSCLE

 WWFSPHS8
Throatless Hand Shears
Hand shears, offered in 8", 10", or 12" long Sheet Metal Thickness Gauge
versions, utilize a throatless design that WWFWFSG
allows cutting up to 3/16" steel or 3/8"
Handy tool quickly determines sheet
round bars. Heavy steel-framed units use
metal thickness. Easy-to-read scale is
an arched upper blade that allows virtually
engraved 0-30 gauge on one side and
effortless cutting throughout the entire
.0125"-.3125" on the reverse side.
stroke.
Part No. Description
WWFSPHS8 8" Throatless Hand Shear Cast Iron Vises
WWFSPHS10 10" Throatless Hand Shear These solid cast iron vises
WWFSPHS12 12" Throatless Hand Shear offer a large anvil area,
swivel base, and replaceable
Throatless Rotary Shear hardened steel pipe jaws at
an economical price. Choose
WWFWFMS from 4" or 6-1/2" bench-
Bench-top shear may be used to cut mounted units.
virtually any shape out of metal up
Part No. Description
to 1/8" thick. Forged steel-framed
WWFWFV4.0 4" Cast Iron Vise
unit combines a ratcheting head, WWFWFV6.5 6-1/2" Cast Iron Vise
adjustable cutter, and adjustable
work stop to aid performing
precise cuts.
Heuer Forged Steel Vises
Among the industry's
leading bench vises,
24" x 20-Gauge Box German-made Heuer units
and Pan Brake use forged steel frames,
WWFWFBP2420 which are 35% stronger
than traditional cast iron
Bench top, 24" long box
units. Virtually indestructible,
and pan brake includes
each vise incorporates a specially-
five removable fingers (1",
crafted spindle and precision-machined
2", 3", 8", and 10"), and is
surfaces for exceptionally smooth operation. Choose
capable of bending up to 1/16" (20-gauge) mild steel.
from vises with fixed or replaceable jaws.
Part No. Description
WWFVH100100 4" (100mm) Jaw Width, Fixed Jaws
Slip Rollers WWFVH100160 6-1/4" (160mm) Jaw Width, Fixed Jaws
Easy-to-operate units WWFVH101160 6-1/4" (160mm) Jaw Width, Replaceable Jaws
allow rolling up to
20-gauge sheet metal Car Covers
quickly and effectively. Economical,
Sturdy bench-top units 3-mil thick plastic
combine cast iron side covers are ideal for
frames with precision covering cars to
ground and hardened protect them from
steel rolls for rolling tight WWFWFSR1.0 dust, dirt, rain, bird
radii. Rollers additionally droppings, etc.
include rolls with wire groove for forming rounds in small Offered in three
increments. sizes to fit a variety of different cars, trucks, or SUV's,
Part No. Description covers include elastic along the bottom for a secure fit.
WWFWFSR1.0 12" Length Slip Roller, 1" Dia. Rolls
Part No. Description
WWFWFSR12 12" Length Slip Roller, 1-1/4" Dia. Rolls WWFWFCCC-SMALL Small Car Cover, 19' Long
WWFWFSR24 24" Length Slip Roller, 1-1/2" Dia. Rolls WWFWFCCC-MED Medium Car Cover, 22' Long
WWFWFSR40 40" Length Slip Roller, 2" Dia. Rolls WWFWFCCC-LARGE Large Car Cover, 24' Long

2023 - 2024 HOT ROD AND EARLY MUSCLE 537

 xtreme racing products
®

Stainless Steel Braided CPE Race Hose Aluminum Adapter Fittings

Durability, heat Straight 45° Elbow 90° Elbow
Flare Pipe
resistance, and great Size Size Flare to Flare to Flare to
Pipe Pipe Pipe
looks... the big three
-3 1/8" XRP981603 XRP982303 XRP982203
reasons for using braided stainless hoses for fuel -4 1/8" XRP981604 XRP982304 XRP982204
lines and other underhood hose requirements. XRP's -4 1/4" XRP981644 — —
chlorinated polyethylene elastomer (CPE) hoses meet -6 1/8" XRP981662 — —
these requirements and are compatible with a wide range -6 1/4" XRP981606 XRP982306 XRP982206
of liquids. -6 3/8" XRP981666 — XRP982266
Size I.D. O.D. 3 Ft. 6 Ft. 10 Ft. 15 Ft. 20 Ft. -6 1/2" XRP981668 — XRP982268
-6AN .344" .547" XRP300306 XRP300606 XRP301006 XRP301506 XRP302006 -8 1/4" XRP981607 — XRP982207
-8AN .438" .641" XRP300308 XRP300608 — XRP301508 XRP302008 -8 3/8" XRP981608 XRP982308 XRP982208
-10AN .562" .797" XRP300310 XRP300610 XRP301010 XRP301510 XRP302010 -8 1/2" XRP981688 XRP982388 XRP982288
-8 3/4" XRP981609 — —
-10 3/8" XRP981611 — XRP982211
Aluminum Hose Ends -10 1/2" XRP981610 XRP982310 XRP982210
Hose ends are aviation nipple and -10 3/4" XRP981613 — —
cutter-style to prevent blow off and
leakage problems that may occur Straight Female to Female Flare Swivel
after assembly. XRP fittings are
Part No. Size
built from heat-treated aluminum.
XRP900104 -4
Note: Double swivel style ends are triple sealed and fully XRP900106 -6
adjustable after assembly to hose. XRP900108 -8
Swivel Non-Swivel XRP900186 -8 to -6
Size
Part No. Part No. XRP900110 -10
Straight
— XRP100004 -4
— XRP100006 -6 Fuel Pressure Take-Off Adapters
— XRP100008 -8 Part No. Description
— XRP100010 -10 XRP700192 -6 Male to -6 Male
45° XRP700193 -6 Male to 1/4"NPT Male
— XRP104504 -4 XRP700194 -6 Male to 3/8"NPT Male
XRP204506 XRP104506 -6 XRP700195 -6 Male to -6 Female Swivel
XRP204508 XRP104508 -8 XRP700196 -8 Male to -8 Male
XRP204510 — -10 XRP700198 -8 Male to 3/8"NPT Male
90° XRP700199 -8 Male to -8 Female Swivel
— XRP109004 -4 XRP700202 -10 Male to -10 Female Swivel
XRP209006 XRP109006 -6
Note: All adapters have a 1/8"NPT port.
XRP209008 XRP109008 -8
XRP209010 XRP109010 -10
120° Aluminum Fuel Pump Fittings
XRP212010 XRP112010 -10
Part No. Pump Thread Size
180°
XRP702108* 5/8"-18 Inv. Flare -8
XRP218006 — -6
XRP981666 3/8"NPT -6
XRP218010 — -10
XRP981608 3/8"NPT -8
* May also be used with crush washer on Carter Super Pumps CARM60968.

Holley Carburetor Fittings

Holley Dual-Feed Part No. Carburetor Thread Size
XRP700006 9/16"-24 Holley -6
Fuel Line Kits XRP700106 7/8"-20 Dual-Feed Holley -6
Kits use quality XRP XRP700108 7/8"-20 Dual-Feed Holley -8
stainless steel braided
hose with lightweight 1-1/2" Diameter Liquid Filled
aluminum fittings.
A 1/8"NPT port for a Pressure Gauges
fuel pressure gauge is XRP710000
included. 1/8" male NPT, with a range of 0-15 PSI.
Part No. Description
XRP731006 -6AN Inlet, Dual-Feed Competition-Style Fuel Line Kit
XRP731008 -8AN Inlet, Dual-Feed Competition-Style Fuel Line Kit

538 2023 - 2024 HOT ROD AND EARLY MUSCLE

 AGM IntelliCharger
12V Batteries XSP1005
AGM, or “Absorbed Glass Mat”, Three-stage 12V/16V AGM
is a new technology where the battery charger utilizes constant
electrolyte is suspended in an current/constant voltage (CC/CV) charging, while a
absorbent fiberglass material instead of flooding the microprocessor monitors, adjusts, and regulates output.
battery with water. The unique design of an AGM battery Includes LED indicators and heavy-duty six-foot cables
makes it spillproof and vibration resistant with ultra-low with clamps.
internal resistance. 3/8" terminals.
Part No. Max Dimensions Weight Billet Aluminum
Amps CA @ 32°F (L x W x H) (lbs.)
XSPD680 800 320 7.13" x 3.03" x 6.57" 14.77 Battery Hold-Downs
XSPD925 1200 550 6.5" x 6.93" x 4.92" 23.37 Rigid billet aluminum hold-downs
XSPD1200 1400 725 7.8" x 6.54" x 6.85" 33.07 are designed to secure XS Power
XSPD5100 1400 745 9.02" x 5.43" x 8.19" 39.68 batteries.
XSPD2400 2000 670 10.24" x 6.65" x 8.31" 62.17
Part No. Description
XSPD2700 2200 1170 12.09" x 6.65" x 8.31" 67.46
XSP511 S680 Side-Mount Box
XSPD3100 2500 1360 13.03" x 6.89" x 8.43" 77.16
XSPS680 1000 320 7.28" x 3.19" x 6.67" 16.62
XSPS925 2400 550 6.65" x 7.08" x 5.07" 26.83
XSPS975 1600 525 7.83" x 5.3" x 6.67" 29.1
XSPS1200 2000 725 7.97" x 6.73" x 6.79" 36.23

Traction-Loc Differentials
Fully loaded differential carriers are
manufactured using billet steel left
and nodular iron right cases fitted with
forged 4320 steel internal gears and
premium Raybestos clutches. Ideal for
street/strip applications, fully rebuildable units utilize an
aggressive design for maximum traction.
Part No. Description
YKNYDGF9-28-AG Ford 9", 28-Spline Axles, Aggressive Design
YKNYDGF9-31-AG Ford 9", 31-Spline Axles, Aggressive Design
Ring and Pinions
The utmost care and quality Master Differential
is put into every Yukon differential component
manufactured. This effort undoubtedly demands extra Overhaul Bearing Kits
time, but ultimately it helps to ensure a quality pattern, The most complete differential
a solid fit, and a clean finish. Yukon gears are easy to set overhaul kits currently available.
up, and they run quietly. Each kit includes pinion and carrier
bearings, pinion shims, Super Shim
Part No. Description
YKNYGGM8.5-342 GM 8.5", 3.42 Gear Set
carrier shims, pinion seal, gasket
YKNYGGM8.5-373 GM 8.5", 3.73 Gear Set (where required), ring gear bolts,
YKNYGGM8.5-411 GM 8.5", 4.11 Gear Set pinion nut, gear marking compond and brush, and two
crush sleeves.
Dura Grip Posi Part No. Description
YKNYKD60-R Dana 60/61
Traction Differentials YKNYKF8.8-A Ford 8.8", 2009-Down
Duragrip differentials incorporate YKNYKF9-A Ford 9", LM102910
Raybestos clutches for effective YKNYKGM12P GM 8.875", 12-Bolt Passenger
clutch lock-up, while delivering YKNYKGM8.5 GM 8.5", 10-Bolt
torque to the tire with the most traction. YKNYKGM8.5-HD GM 8.5", 10-Bolt, Aftermarket Positraction Unit
Fully rebuildable units feature nodular
iron cases fitted with forged 4320 steel
internal gears for maximum durability.
Part No. Description
GM 8.875", 12-Bolt Passenger, 30-Spline Axles,
YKNYDGGM12P-3-30-1
3.08-3.90 Gear Ratios
YKNYDGGM7.5-3-28-SM GM 7.5"/7.625", 10-Bolt, 28-Spline Axles
YKNYDGGM8.5-3-28-1 GM 8.5", 10-Bolt, 28-Spline Axles
YKNYDGGM8.5-3-30-1 GM 8.5", 10-Bolt, 30-Spline Axles
YKNYDGF9-28-AG Ford 9", 28-Spline Axles
YKNYDGF9-31-AG Ford 9", 31-Spline Axles

2023 - 2024 HOT ROD AND EARLY MUSCLE 539

Domestic EFI 2005-Up V8/V6 Purge-Cloud LED Kit
Ford Mustang Wet Nitrous System High-intensity, focused-beam LED light
illuminates nitrous purge cloud.
COM82034
Part No. Description
One of the safest, COM82170B Blue Purge Cloud LED Kit
most user-friendly COM82170R Red Purge Cloud LED Kit
nitrous systems
available, the system’s "Machine Gun" Purge Kit
patented Active Fuel
Control monitors COM82370B
bottle pressure and Kit adds sound and
automatically adjusts light pulses to any
fuel enrichment. purge kit, delivering
Automatically activates a "machine gun" blast
at wide-open throttle, adding up to 175 horsepower. Use of noise and color.
on stock or modified vehicles. System includes bottle, Includes module,
stainless steel braided lines, hardware, and instructions. purge cloud LED kit,
and installation hardware.
Nitrous Pressure Gauge
COM82005 Nitrous Oxide Bottle Heater
Closely monitoring bottle pressure is COM82006
crucial to proper nitrous system function.

Nitrous Oxide Purge Kits

Clear nitrous lines of unwanted vapors and ensure
maximum nitrous activation. Choose from single, 20'
spray pattern or dual-outlet “V” pattern purge kits.
Each kit includes oversized delivery lines, solenoid and
required hardware.
Part No. Description
COM82010 Purge Kit
COM82175 Dual Outlet Purge Kit

540 2023 - 2024 HOT ROD AND EARLY MUSCLE

INDEX

Air Cleaner Assemblies and Air AN Hose Assembly...................... 220 Battery Boxes, Trays and
Intake Kits........................... 27-28, AN Hose Pressure Testers.......... 220 Components.52, 105, 121, 366, 436,
90, 100-101, 176, 181-183, 211, 230, AN Plumbing Tools............ 13, 15, 220 481, 504, 539
247, 331, 350, 401-404, 408-409, Battery Cables. 52, 333, 372, 424, 481
434-435, 470-471, 485 Analog Gauge Kits.....84, 126-127, 360
Analog Gauges.................................. Battery Charger Components.79, 123,
Adhesives...... 139, 287-288, 492, 494 362-363
3, 12, 66, 84, 126-127, 172, 245, 278,
Air Cleaner Assembly Components... 347-348, 359, 410, 425, 504, 538, Battery Chargers....122-123, 363, 539
27-29, 470-473, 487 540 Battery Disconnect Switches.54, 199,
Air Cleaner Fastener Kits.28, 80, 298, Angle and Flat Stock - Aluminum.. 36 333, 371, 425-426
350, 403, 408-409 Battery Hold-Downs...................... 52
Angle and Flat Stock - Steel.......... 36
Air Cleaner Gaskets....................... 28 Battery Relocation Kits........ 348, 481
AN-NPT Fittings and Components....
Air Conditioner Brackets and 16-20, 32, 34-35, 57, 66-68, 100, Battery Terminal Covers.53, 424-425
Components... 25, 99-100, 211, 253 104-105, 168-174, 215-220, 259, Battery Terminals and Components..
Air Conditioner Eliminator Brackets 261, 265, 278, 359, 410, 426, 461, 53-55, 333, 362, 373, 423-424
and Components................211, 310 470, 488, 517-518, 522, 524-525, Bellhousing Fastener Kits........... 263
Air Conditioning Binary/Trinary 538
Switches.................................. 517 Bellhousings................. 275-276, 427
Antennas and Components......... 508
Air Conditioning Compressors and Blue Dots.................................... 436
Anti Seize.....................287, 289, 389
Components........99, 433, 502, 517 Body Braces............................... 472
Antifreeze/Coolant................98, 443
Air Conditioning Condensers and Body Fastener Kits.......... 63, 105, 150
Antifreeze/Coolant Additives.......131,
Components......................514-516 139, 159, 233, 301, 344, 393, 443, Body Mounts....150, 395, 411, 455, 507
Air Conditioning Driers and 460 Body Panel Brackets................29, 39
Components...................... 516-517 Aprons.......................................... 43 Bolts........................................ 64, 81
Air Conditioning Evaporators/Kits.... Assembly Lubricant.15, 156-159, 300, Boost Controllers.................504, 522
514-515 312, 389, 444, 459, 497-498 Brake Backing Plates.................. 458
Air Conditioning Hoses and Lines...... Automatic Transmission Adapters.... Brake Bleeder Adapter And
516, 518 261 Components............................. 35
Air Conditioning Kit Components.515 Automatic Transmission Control Brake Bleeder Bags..................... 461
Air Filter Cleaners.... 42, 230, 311-312, Modules.................................. 483 Brake Bleeder Bottles............ 35, 339
393 Automatic Transmission Dipsticks.... Brake Bleeder Kits............... 339, 379
Air Filter Elements.. 29, 181, 230, 522, 210, 289, 298, 346, 431, 470, 472, Brake Bleeder Wrenches.............. 33
535 486
Brake Bleeders.............446, 461, 462
Air Filter Oil........................... 230, 311 Automatic Transmission Filters.. 382
Brake Boosters and Components.. 31,
Air Filter Wraps............................. 28 Automatic Transmission Kickdowns. 279-284, 438, 458, 502
Air Intake Inlet Tubes, Elbows, and 69, 96, 264, 291-292, 297, 368, 436
Brake Caliper Pistons.................. 446
Components.....................177, 520 Automatic Transmission Modulators.
Brake Caliper Rebuild Kits........... 446
Air Intake Tube Clamps.... 46, 66, 520 96
Brake Clevis................................ 298
Air Suspension Components............. Automatic Transmission Pans...... 96,
452-455 145, 330, 432, 470, 483, 485 Brake Drums................................ 212
Air Suspension Compressors and Automatic Transmission Shift Kits.... Brake Dust Shields...............346, 446
Kits......................................... 454 95 Brake Fluid....... 77, 124, 131, 302, 312,
Air Suspension Kits and Air Shocks... Automatic Transmissions .......... 368, 342-343, 443
453 482-483 Brake Fluid Test Strips.................379
Air Tanks....................................... 76 Axle Bearing Retainers...........70, 340 Brake Hard Line........ 33, 97, 446, 457
Alternator Brackets and Axle Bearings..................70, 212, 340 Brake Hoses.....21, 35, 220, 446, 462,
Components..................... 25, 100, Axle Housing Ends.................70, 340 530
262-263, 309-310, 346, 392, 435, Axle Shafts.................... 70, 340, 482 Brake Proportioning Valve
470-472, 486 Components...................... 33, 457
Axle Spacers................................. 70
Alternator Fans.............308-309, 433 Brake Proportioning Valves..... 32-33,
Axle/Hub Seals ............................. 30
Alternator Fastener Kits................ 80 97, 278, 438, 457, 502, 530
Ball Joints..................... 398-399, 476
Alternator Pulleys................. 104, 500 Brake Quiet................................. 289
Banjo Bolts............... 20, 34, 173, 220
Alternators/Generators and Brake Rods................................... 32
Components..55, 99, 314, 392-393, Batteries......78-79, 121, 285, 363-366,
Brake Systems.............................. 31,
405-408, 499-500, 503 504, 539
280-284, 456-458, 530-533

2023 - 2024 HOT ROD AND EARLY MUSCLE 541

INDEX

Breather Tanks............................ 521 C-Clip Eliminator Kits and Dash Knobs................ 7, 107, 294, 472
Bulk Hose..... 12, 14-15, 20-21, 67, 166, Components........................... 340 Dash Wiring Harnesses............... 370
168, 213, 215, 461, 524, 538 C-Clips.......................................... 72 Deburring Tools............................ 75
Bump Steer Kits and Components.... Chassis Kits.................................. 36 Decals........................................... 54
417 Chassis Stiffeners....93, 256, 416, 418, Degreasers......42, 124, 158, 190, 302,
Bump Stops.......................... 411, 474 452, 455, 507, 509 466
Canopies.............................. 192, 304 Chassis Tabs, Brackets and Dielectric Grease.................289, 362
Cap and Plug Fittings............... 17, 21, Components.............29, 35, 39-40 Differential Carrier Components.212,
34-35, 46, 58, 60, 170, 172, 217, 219, Check Valves............................... 522 342, 442
278, 446, 472 Cigarette Lighters........................273 Differential Cover Gaskets.....72, 442
Car and Truck Covers and Circuit Breakers..................... 51, 425 Differential Covers...... 340, 407, 438,
Components.......................89, 155 Circuit Testers.........................49-50 470-471, 491, 496
Car Dusters..................................122 Cleco Pins..................................... 75 Differential Cross Pins.................. 72
Car Wash Soaps............ 285, 341, 390 Climate Control Panels...........514-516 Differential Setup Tools................ 72
Carburetor Adapters and Spacers..... Clutch Cables, Linkages and Differential Shims.................. 71, 442
177, 334, 347, 488, 491 Components... 92, 117, 211-212, 476 Differentials and Differential
Carburetor Adjusting Tools.......... 177 Clutch Fork Pivot Balls..........276, 315 Carriers............................ 142, 539
Carburetor Base Plates............... 406 Clutch Forks and Components.....276 Digital Gauge Kits......................... 82
Carburetor Calibration Kits... 142, 174 Clutch Kits.................. 3, 315-316, 441 Digital Gauges.... 24, 84, 193, 410, 423
Carburetor Choke Kits and Clutch Master Cylinders and Disc Brake Caliper Brackets....30, 74,
Components.....................174, 246 Components..................... 314, 451 445
Carburetor Discharge Nozzles...... 174 Clutch Slave Cylinders and Disc Brake Caliper Components.. 446
Carburetor Dust Covers.29, 334, 435, Components..................... 314, 441 Disc Brake Calipers .......23, 30-31, 74
488 Clutch Throwout Bearings and Disc Brake Pads.......................... 445
Carburetor Fastener Kits. 80-81, 334, Components........ 212, 315-316, 441
349, 472, 488 Disc Brake Rotors..................30, 445
CO2 Bottle Brackets...................... 41 Distributor Advance Kits............. 352
Carburetor Floats......................... 174 Coil Spring Mounts and Brackets. 153
Carburetor Fuel Lines/Logs...... 3, 19, Distributor Advance Lockouts.... 352,
Coil Springs...................................... 388
68, 172, 175, 191, 219, 243, 247, 347, 23, 92, 155, 166, 210, 256-257, 416,
421, 487, 538 Distributor Advance Springs....... 348
445-446, 452, 475-476, 508-510
Carburetor Gaskets. 174, 177, 334, 421 Distributor Caps........ 4, 350-353, 388
Coil-Over Conversion Kits............. 23
Carburetor Heat Shields.............. 246 Distributor Electronic Conversion
Coil-Over Shock Kits.26, 415, 418-421, Kits......................................... 386
Carburetor Jets and Components..... 452, 454, 509
174, 246, 247 Distributor Fastener Kits............... 80
Coil-Over Thrust Bearings............ 418
Carburetor Linkages...............69, 174 Distributor Gears.................. 350-351
Collector Flanges................. 252, 378
Carburetor Main Bodies.............. 406 Distributor Hold Downs.. 56, 103, 210,
Complete Linkage Rebuild Kits.. 396, 324, 333, 348, 405, 435, 470
Carburetor Metering Blocks and 453
Components.................3, 406, 421 Distributor Ignition Modules....4, 333,
Control Arm Fastener Kits......93, 241, 352, 387-388
Carburetor Metering Rods............ 174 418
Carburetor Needle and Seats....... 174 Distributor Replacement Parts... 388
Control Arm Support Braces....... 509
Carburetor Power Valves and Distributor Rotors................. 350-351
Cooling Fans - Electric......................
Components........................... 246 44-45, 143-144, 148, 201-202, 347, Distributors...........4, 55-56, 179, 333,
Carburetor Pumps....................... 174 361, 380, 404, 437, 465 350-353, 387-388, 405, 469
Carburetor Rebuild Kits.....3, 142, 174, Cooling Fans - Mechanical......44-45, Door Handles.............................. 297
176, 247, 271, 421 203, 382 Door Handles/Pulls - Interior.......108,
Carburetor Sight Plugs................ 334 Counter Balance Plates...........57, 195 128, 294
Carburetor Springs...................... 174 Countersunk Washer..................... 63 Door Hinges.................................. 87
Carburetors.... 142, 174, 191, 243-244, Crankshaft Pulleys.104, 433, 486-487 Door Latch Assemblies... 87, 294, 451
271, 406, 422 Crankshaft Scrapers............ 326-327 Door Lock Knobs......................... 107
Caster Camber Plates......92, 257, 417 Cruise Control Kits and Components. Door/Door Jam Trim.................... 128
Catalytic Converters and 269 Drag and Center Links and
Components.................... 305-306 Crush Washers........19-20, 34, 68, 173 Components................114-117, 395
Cylinder Heads....................... 112, 176

542 2023 - 2024 HOT ROD AND EARLY MUSCLE

INDEX

Dress-Up Kits...... 401-402, 408-409, Exhaust Collector and Flange Fluid Cooler Installation Kits........ 431
428- 429 Gaskets.............407, 427, 464, 480 Fluid Cooler Mounting Kits....380-381
Drill Bits............................. 50, 62, 75 Exhaust Cutouts and Components.... Fluid Coolers...... 96-98, 144-148, 203,
Drill Fixtures and Components..... 62, 60, 151, 208, 240, 254, 379, 413, 333, 361, 380-382, 467, 483, 521
265 427 Flywheels ................ 195, 211, 315, 441
Drive Shaft Safety Loops. 41, 73, 255, Exhaust Flex Pipes.......................478 Frame Rails.................................. 510
275 Exhaust H and X-Pipes....91, 165, 240, Friction Modifiers........ 393, 444, 498
Drive Shafts .........................212, 368 271, 306, 413
Front / Rear End Assemblies.. 70, 134
Duct Hoses.................................. 516 Exhaust Hangers and Components...
60, 378, 414, 478 Front Control Arm Bushings..185-188,
Electric Fan Controllers........131, 144, 399, 411, 445
202, 361, 370, 380, 404, 426, 437, Exhaust Header/Manifold Gaskets....
60, 407, 447, 464, 482 Front Control Arm Components. 399,
465, 518 475
Electric Fan Mounting Brackets... 44, Exhaust Intermediate Pipes......... 414
Front Control Arms...........................
96, 98, 144, 203, 347, 437, 465, 483 Exhaust Manifold/Header Fastener 93, 153, 223, 241, 256-257, 417-419,
Electric Fan Switches/Sensors.......7, Kits.....264, 330, 349, 408, 477, 481 445-446, 454-455, 474-475
146, 202, 370, 381, 465 Exhaust Manifolds and Components. Front Suspension Kits.... 241, 416, 419,
Electric Fan Wiring Harnesses...... 98 60, 154, 239, 252, 255 420
Electrical Fuses............................. 51 Exhaust Pipe - Bends... 165, 240, 378, Fuel Cell/Tank Bracket................ 270
Electrical Junction Blocks........ 8, 51, 413, 478, 519
Fuel Cell/Tank Caps.................... 270
423-425 Exhaust Pipe - Straight..378, 478, 519
Fuel Cell/Tank Filler Necks......... 453
Electrical Switches and Exhaust Sensor Bungs Plugs and
Adapters. 23, 60, 195, 263, 478, 521 Fuel Cell/Tank Gaskets............... 270
Components...............................7,
32, 86-88, 155, 258, 272, 296-297, Exhaust Sidepipes and Components. Fuel Cell/Tank Sending Units...... 125,
370-372, 425-427, 496 378 270, 410
Electrical Wire....................... 47, 373 Exhaust Systems. 164, 204-205, 306, Fuel Cell/Tanks......8, 9, 195, 246, 270
Electronic Fuel Injection Systems..... 412 Fuel Filters and Components......... 9,
178, 193-195, 244-245, 354 Exhaust Tips..164-165, 205, 223, 240, 66-67, 102, 147, 173-176, 220-221,
414, 427 251, 348, 382, 435, 473, 487, 535
Electronic Fuel Injectors.............. 193
Exhaust Wrap......... 60, 138, 236, 492 Fuel Hard Line.............................. 67
Emblems..................................... 155
Exhaust Wrap Ties........... 60, 62, 492 Fuel Injector Harnesses.............. 265
Engine and Transmission Dowel Pins.
276 Exhaust Y-Pipes............ 151, 240, 306 Fuel Pressure Isolators............... 425
Engine Block Off Plates............... 334 Expansion-Freeze Plugs............. 402 Fuel Pressure Regulator
Components............................. 66
Engine Conversion Kits............... 489 Exterior Light Assemblies....... 88-89,
108, 153, 297, 366-367, 436, 446 Fuel Pressure Regulators.5, 11-12, 24,
Engine Covers............................. 335 66, 91, 175-176, 248, 250-251, 348,
Engine Fastener Kits................ 79-80 Exterior Light Bulbs......272, 367, 446 421-422
Engine Lift Plates......................... 60 Exterior Liquid Protectants. 159, 301, Fuel Pump Block-Off Plates.. 66, 103,
Engine Mount Fastener Kits......80-81 311, 341, 390, 534 346, 404, 487
Engine Oil Dipsticks.89, 100, 103, 210, Exterior Mirrors........ 73, 108, 153, 437 Fuel Pump Eccentrics................. 323
290, 298, 318-319, 324, 327-328, Exterior Trim................................ 128 Fuel Pump Fastener Kits............... 80
346, 403, 431, 470, 472, 485 Fan Parts and Components........... 45 Fuel Pump/Filter Springs.............. 67
Engine Oil Pans................................. Fender Covers and Track Mats...... 98 Fuel Pump/Filter/Regulator/Cooler
57, 152, 210, 250, 262-263, 318-319, Fire Extinguisher Bottle Brackets..... Brackets.................. 9, 67, 102-103
326-330, 408, 431, 470, 473, 484, 234
491, 528 Fuel Pumps........ 10-11, 24, 66, 91, 122,
Fire Extinguishers............... 200, 234 175-176, 179, 195, 245, 248-251, 527
Engine Oil Thermostats......... 146, 381 Firewalls......................................149 Fuel Rails and Components...193, 262
Engine Stand Casters.................... 61 Flaring Tools............................... 220 Fuel Supply Lines......................... 175
Engine Stands ..........................60-61 Flat Washers............................ 63-64 Fuel System Additives..................113,
Engine Tilters............................. 489 Flexplate and Flywheel Fastener 124, 131, 159, 190, 300-301, 312-313,
Engine Wiring Harnesses..... 370, 376 Kits.......................... 265, 330, 349 460, 498
Engines, Complete ......... 110-112, 229 Flexplates and Components........ 323 Fuel Systems...........................11, 195
Epoxies..........................287, 389, 512 Floor Heat Barriers.. 137, 140-141, 494 Full Wiring Harness - Application
Exhaust Clamps.....165, 414, 478-480, Floor Mats............................. 154, 156 Specific..................6, 369, 373-375
519-520 Floor Panels.................................120

2023 - 2024 HOT ROD AND EARLY MUSCLE 543

INDEX

Full Wiring Harness - Universal... 5-6, Hood Pin Fastener Kits and Ladder Bar Crossmembers........... 94
273, 369, 374 Components......... 29, 65, 350, 451 Leaf Spring Blocks........................ 74
Funnels................................290, 407 Hood Props...........................109, 297 Leaf Spring Bushings....................411
Fuse Boxes..................7, 51, 369, 423 Horn Buttons..107, 226, 228, 232, 277 Leaf Spring Fastener Kits..... 74, 275,
Gas Tank Sealer.......................... 390 Horn Wiring Kits....................107, 197 506
Gasket Coatings....................389, 512 Hose and Wire Cutters..... 13, 47, 455, Leaf Spring Mounts and Brackets. 41,
Gauge Line Kits.................... 425-426 523 74, 150, 324, 411, 445, 506
Gauge Mounting Panels.... 83-85, 128, Hose and Wire Sleeving. 135-141, 236, Leaf Springs.. 150, 154, 256-257, 324,
251 335, 493 445
Gauge Mounting Pods.............. 84-85 Hose Clamps......... 46-47, 65, 105, 521 License Plate Fastener Kits.........140
Gear Marking Compound............... 70 Hose Covers and Sleeves.12, 33, 432, License Plates and Components.108,
Gear Oil.......77, 124, 158, 189, 301, 310, 458 436
319, 333, 343, 383, 443-444, 449, Hose End Crimpers...................... 518 Light Assembly Components..... 366,
460, 497 Hose Ends. 13-16, 19-22, 104, 167-168, 372
Grease. 77, 131, 159, 190, 299, 312, 319, 173, 213-215, 461, 517-518, 524-525, Light Bulb Covers.......................... 84
385, 444, 512 538 Line Lock Installation Kits......33, 259
Grommet Assortments............... 333 Hose Support Brackets......12, 34, 48, Line Lock Kits........................33, 259
Grommets......... 50, 53, 102, 345, 378, 65, 105, 220, 272 Line Retaining Clips........... 35, 48, 65
401-402, 423-424, 430, 470, 485 How-To Books......................258, 463 Lock Nuts..................................... 64
Ground Straps............................6, 52 IAC Valves and Components......... 193 Lock Washers............................... 64
Hand Air Pump.............................. 79 Idler Arms................................... 395 Main Cap Girdles......................... 328
Hand Cleaner.............................. 388 Idler Pulleys.................................210 Manual Transmission Rebuild Kits
Harmonic Balancer Covers.......... 405 Ignition Boxes and Controllers.......... and Components..................... 496
Harmonic Balancer Fastener Kits...... 352-355 Manual Transmissions.. 276, 450, 495
330 Ignition Coil Brackets.......56, 59, 210, Map Sensors................................ 193
Harmonic Balancer Puller and 248, 262-263, 348, 400, 470, 487
Mass Airflow Sensors and
Installation Tools...................... 261 Ignition Coil Covers.128, 182, 348, 354 Components......................90, 263
Harmonic Balancers and Ignition Coils......... 4, 55-56, 352-355, Master Cylinder and Booster Kits.151,
Components.............................112 386-387 156, 279-284, 457-458, 502
Header Ball Flange Kits....... 205, 240 Ignition Switches..................... 7, 372 Master Cylinder and Reservoir
Header Collectors and Components.. Ignition Tune-Up Kits...................387 Brackets.... 149, 151, 282, 458, 502,
520 Ignition Wiring Harnesses.......... 265, 530
Header Extensions...................... 209 354-355, 370-371 Master Cylinder Pushrod......278, 502
Header Flanges.................... 378, 427 Inner Fenders............................... 241 Master Cylinder Reservoir Caps.. 345
Header Reducers...240, 252, 379, 414 Intake Manifold Fastener Kits....... 80, Master Cylinder Reservoirs......... 533
Header Tabs and Tethers............. 521 330, 349 Master Cylinders....... 32, 97, 280-281,
Headers.......................... 91, 152, 154, Intake Manifold Spacers........ 210, 261 457-458, 502, 530, 533
205, 209, 237-240, 252-253, 255, Intake Manifolds............180, 193, 355, Mechanical Fan Spacers.45, 203, 382
271, 376-377, 413, 464, 498 528-529 Microfiber Cloths and Wash Mitts......
Headlight/Tail Light Wiring Intake Valley Covers.....100, 250, 263, 534
Harnesses.................... 6, 372, 446 430 Mono Ball Bearings..................... 454
Heat Protection Tapes................ 137, Intercoolers and Heat Exchangers.... Motor Mounts......61, 93, 100, 129, 185,
140, 236, 493-494 522 239, 241, 252, 254, 261-262, 411,
Heat Shields............... 54,60, 136-141, Interior Light Assemblies.....7-8, 273, 420, 430, 490, 506, 508
235-236, 273, 333, 349, 493-495 367, 371, 373 Motor Oil....76, 124, 156-158, 189, 299-
Heat Wrap Ties............. 136, 236, 495 Interior Liquid Protectants.. 301, 341, 300, 310-311, 319-320, 343-344,
Heater Cores................................ 153 390 384-385, 443, 459, 496-497, 513
Heater Hose........... 261, 264, 432, 518 Interior Mirror Brackets...............108 Motor Oil Additives.159, 190, 299-300,
Heaters and Accessories............ 202 Interior Trim................................. 107 344, 444, 497
Heli-Coil Kits and Components..... 63 Jack and Stand Pads....................411 Motor Plates................................ 264
Hole Saws..................................... 75 Jack Dirt Wings and Pads........... 304 Mufflers and Components...........120,
Keyless Entry Systems.................. 86 163-164, 205-209, 305-306, 378,
Hood Adjusters............................ 451 413-414, 478, 480, 523
Hood Hinges......................... 109, 451 K-Members and Components...... 418,
490
544 2023 - 2024 HOT ROD AND EARLY MUSCLE
INDEX
Multipurpose Cleaners................. 42, Parking Brake Cables........... 298, 457 Push Lock Fittings...................... 455
124, 131, 158, 161, 285, 302, 311, 313, Parking Brake Handles................ 297 Quick Disconnect Fittings...... 21, 219,
341, 344, 388, 390, 466, 511, 534 Pedal Assemblies and Components.. 523
Nitrous Oxide Blow Down Tubes.. 364 31, 105-106, 128, 149, 292-293, 298, Quick Release Fasteners and
Nitrous Oxide Blow Off Disc. 359, 364 436 Components............................. 63
Nitrous Oxide Bottle Brackets.41, 364 Pedal Pads and Components.106-107, Rack and Pinion Bushings and
Nitrous Oxide Bottle Openers...... 359 292-293, 298, 436 Mounts................. 186, 198-199, 241
Nitrous Oxide Bottle Warmers..... 540 Petcock........................................131 Rack and Pinion Components...... 241
Nitrous Oxide Purge Illuminators....... Pilot Bearings - Roller... 212, 276, 333 Rack And Pinions.... 150, 198-199, 241,
364, 540 Pilot Bushings..............................276 505-506
Nitrous Oxide Purge Kits..... 359, 364, Pinion Angle Shims......................275 Radiator Caps... 44, 98, 103, 347, 438,
540 Pinion Crush Sleeves/Spacers.... 442 523
Nitrous Oxide Switches............... 364 Pinion Depth Gauges................... 442 Radiator Filler Necks.................. 523
Nitrous Oxide Systems.358-359, 364, Pinion Nuts............................72, 442 Radiator Fin Combs...................... 43
540 Pinion Seals...........................72, 442 Radiator Hose..... 46-47, 361, 432, 471
Nuts............................ 17, 64, 170, 216 Pinion Supports............................ 72 Radiator isolator.................... 361, 411
Oil Accumulators, Reservoirs, and Pitman Arms.........................198, 396 Radiator Modification Kit............. 361
Tanks........................................ 58 Radiator Mounting Brackets and
Plasma Cutters........................... 536
Oil Dry........................................... 42 Components............................ 361
Plastic/Nylon Washers................. 216
Oil Filter Adapter Fastener Kits..... 57 Radiator Repair ........................... 361
Plastigauge................................... 57
Oil Filter Adapters and Components.. Radiator Shrouds................... 44, 361
57-58, 147, 210, 382-383, 489, 491, Pliers........................ 49, 62, 436, 512
Radiators.......23, 43, 98, 125, 130-131,
535 Polishing Compounds... 301, 340-341, 153, 233, 362, 409, 437
Oil Filter Covers.....................431, 470 390, 512, 534
Rear Control and Trailing Arm
Oil Filter Relocation Kits and Polishing Kits.............................. 340 Bushings............................ 212, 411
Components..... 146-148, 383, 489, Power Door Lock Kits and Rear Control and Trailing Arm
491, 535 Components......................86, 464 Mounts.............................. 417, 507
Oil Filters.173, 221, 320, 324, 332, 535 Power Filters............................... 356 Rear Control Arms and Trailing Arms.
Oil Pan Baffles..................... 326-328 Power Steering Flow Valves. 104, 435 93-94, 256-257, 275, 408, 416, 418,
Oil Pan Drain Plug Gaskets.......... 346 Power Steering Fluid.... 124, 158, 300, 421, 476, 507, 510
Oil Pan Fastener Kits..... 80, 264, 324, 302, 312, 444, 459 Rear End Housing Fastener Kits... 70,
330, 349, 431 Power Steering Hoses and Lines.104, 72, 81
Oil Pan Plug Kits...................346, 407 116, 119, 151, 198, 434 Rear End Housing Truss Supports.. 41
Oil Pump Drive Shafts.......... 319, 324 Power Steering Pulleys.. 104, 116, 119, Rear End Locators.......... 93, 507, 510
198, 308, 309, 433 Rear Main Seal Adapters............... 57
Oil Pump Pickups...........102, 318-319,
326-330, 408, 491 Power Steering Pump Components.. Rear Suspension Kits....149-150, 256,
117, 241, 309 419- 420, 452, 454, 507
Oil Pump Springs........................ 325
Power Steering Pumps....104, 116-119, Rear View Mirrors..................108, 437
Oil Pump Supports...................... 264 199, 309, 434, 501, 503
Oil Pumps ............... 318-319, 325-328 Relays/Relay Kits.7, 51, 144, 269, 272,
Power Steering Reservoir Caps....100 370-372, 380, 437
Oil Restrictors........................58, 523 Power Steering Reservoirs... 103-104,
O-rings........21-22, 27, 46, 67, 173, 217, Reservoirs Pumps and Steering Box
119, 309 Brackets.25, 116, 119, 198, 253, 309,
345, 442, 484 Power Top Harness...................... 371 433, 434-435, 501
Overflow Tanks/Catch Cans and Power Trunk Lock Kits and
Components...... 98, 103, 270, 409, Residual Pressure Valves.............. 32
Components............................. 88 Resonators..........................205, 523
432, 438, 473
Power Window Kits and Rev Limiters - 2 Steps.......... 356, 386
Oxygen Sensor Controllers............ 24 Components........................86, 88
Oxygen Sensors........................... 193 Ring and Pinion Gears ........... 71, 212,
Protective Wire Sleeve..... 48, 68, 139, 341-342, 448-449, 539
Paint.160-161, 286, 323, 390-391, 393, 273, 375, 480, 521
466, 492, 511 Ring and Pinion Install Kits/
Pulley Covers....................... 103, 309 Bearings........71, 212, 341-342, 442,
Paint and Coating Strippers..........161 Pulley Fastener Kits....................... 81 448-449, 539
Paint Prep............................. 161, 390 Pulley Kits... 91, 99-100, 251, 307-309, Ring Gear Fastener Kits.............. 442
Panhard, Track Bar, and Rear End 433, 518
Locator Bushings..................... 186 Ring Gear Spacers............ 70-71, 349
Pulley Shims and Spacers......46, 308

2023 - 2024 HOT ROD AND EARLY MUSCLE 545

INDEX

Rod End Bushings......................... 65 Shrinker/Stretcher....................... 75 Steering Shaft Support Bearings. 74,

Rod Ends - Clevises...................... 32 Shut Off Valves............................ 173 114, 198
Rod Ends - Spherical .................. 454 Silicone Adapters/Elbows........... 522 Steering Shafts and Components.74,
Roll Bar Clamps.............................. 41 Silicone Coating Sprays............... 136 114-117, 150, 197, 199, 255
Roll Bar Covers............................ 229 Silicone Sprays.............................131 Steering Wheel Adapters and Install
Kits..... 107, 197, 227-229, 232, 268,
Roll Cages and Components.......... 36 Snips and Shears................... 75, 537 277
RPM Chips................................... 356 Sockets.............................. 224, 408 Steering Wheel Covers................. 107
RTV and Silicone Sealers and Gasket Solder........................................... 53 Steering Wheel Quick Disconnects...
Makers.287-288, 299, 388, 389, 512 Sound Deadener Tools..162, 260, 494 268
Rust Removers and Prevention......... Sound Deadeners....140-141, 162, 200, Steering Wheels and Components....
160-161, 390-391, 535 260, 494 106-107, 225-232, 277, 321-322,
Safety Wire............................62, 436 Spark Plug Boot Protectors.. 135, 138, 438
Schrader-Tire Valve Stem Tools.... 76 273, 335, 480, 493 Storage Cases........................49, 363
Scrapers...................................... 512 Spark Plug Boots........................ 324 Strut Rod Bushings................ 186, 411
Scrub Bags................................... 28 Spark Plug Wire Markers...... 348, 356 Strut Rods.............. 154, 257, 418, 475
Seal Alignment Tool...................... 57 Spark Plug Wires ........5, 185, 211, 261, Struts......................273-274, 415-417
Seam Sealer................................ 391 337-339, 353, 357-358, 386, 388, Studs............................................ 53
Seat Belts and Harnesses......73, 156, 481
Subframe Connectors and
463 Speed and Position Sensors...... 244, Components....... 93, 129, 148, 223,
Seat Belts and Harnesses Brackets 370 256-257, 455, 508
and Mounts............................... 73 Speedometer Cables................... 297 Supercharger Components......... 262
Seat Brackets, Mounts, and Sliders... Spider Gears......................... 341-342 Superchargers......................179, 528
73, 394, 468 Spindle Nuts................................. 30 Suspension Handling Kits....256, 418,
Seat Fastener Kits...................... 468 Spindles and Components......30, 74, 452-454, 506
Seat Heaters................................. 89 154, 241, 445, 454, 456, 533 Suspension Tube Ends.................. 38
Seats.................... 322, 394, 467-468 Spools and Mini Spools ................ 341 Sway Bar Bushings and Mounts... 186,
Sending Units........................ 84, 125 Spray Guns.................................. 286 257, 397, 411
Shaved Door Handle Kits.. 86, 88, 464 Spray Lubricants... 131, 158, 190, 300, Sway Bars................................... 149,
Sheet Metal Brake........................537 311, 460, 498 242, 256-257, 418-420, 445-446,
Sheet Plastic.............................. 229 Spray on Thermal/Accoustic 453, 455, 506-507
Barriers................................... 286 Tachometer Adapters................... 85
Sheetmetal Roller................ 536, 537
Squeegees...................................122 Tape...................................... 49, 162
Shift/Warning Lights and
Components.............356, 407, 426 Starter Fastener Kits.............80, 264 Tape Measures Rulers and
Shifter Boots and Rings.......108, 120, Starter Solenoids and Components.. Measuring Devices.................... 97
258, 295, 297, 349 54-55, 425 Temperature Sensors.................. 193
Shifter Brackets Cables and Starters.....54, 133, 211, 324, 357, 387, Thermostat Housing Fastener Kits.81
Linkages...... 94, 95, 259, 266, 269, 392, 407, 492, 502-503 Thermostats................. 347, 477, 498
295, 297 Starting Fluids............................ 299 Thread Locking Compounds.............
Shifter Components....... 94, 258, 296 Steam Port Block Off.................. 264 286-288, 389, 512
Shifter Knobs........ 258, 295-296, 323 Steam Vent Hose kit............ 263-264 Thread Sealers.............. 287-288, 389
Shifter Sticks.109, 120, 128, 258, 295, Steering Boxes and Components...... Throttle Bodies.........................90-91
510 115-119, 153, 155, 198-199, 266 Throttle Body Adapters and Spacers.
Shock Crossmembers................... 40 Steering Column Boots............... 266 262
Shock Wrenches.....................23, 418 Steering Column Brackets.....114-115, Throttle Body Gaskets................. 177
Shocks......22, 153, 256-257, 273-274, 118, 197, 266, 269 Throttle Brackets.....69, 133, 247, 291,
367, 415-416, 421, 445, 452-453 Steering Column Knobs and Levers.. 297, 347, 487
Shock-Strut Bushings................... 65 267-269 Throttle Cables..... 290-292, 297, 436
Shock-Strut Mounts........40, 150, 509 Steering Column Wiring Harnesses... Throttle Control Kits................... 426
269
Shop Rags/Towels.................. 42, 141 Throttle Linkage and Components....
Steering Columns and Components.. 69, 174-177, 334, 528
Shop/Trailer Organizers........ 42, 304 196, 265-267, 269
Shrink Sleeve Tubing..... 50, 135, 235, Throttle Position Sensors.... 193, 245
Steering Shaft Joints/U-Joints........
335 113-118, 197-198, 268-269, 479, 506

546 2023 - 2024 HOT ROD AND EARLY MUSCLE

INDEX

Throttle Return Spring and Brackets. Trunk and Hood Latch Assemblies.... Water Necks - Thermostat Housings.
69, 195, 247, 291, 334, 347, 426, 87, 297 46, 103, 330, 345, 405, 433, 470,
435, 470, 487, 488 Tube Nuts and Sleeves. 17, 20, 22, 33, 484-486
Tie Rod Boots.............................. 186 67, 170, 173, 217-218, 278, 517 Water Pump Components...... 45, 133
Tie Rods and Components....198-199, Tubing..................................... 36-38 Water Pump Fastener Kits............ 80
241, 256-257, 397, 418, 507 Tubing Notcher Components........ 75 Water Pump Gaskets..................... 46
Tie-Down Anchors......... 40, 303-304 Tubing Notchers........................... 75 Water Pump Pulleys......104, 183, 433,
Tie-Down Sleeves....................... 303 Tubing Straightener.................... 536 486-487
Tie-Down Straps..................303-304 Turbo Flanges............................. 523 Water Pump Spacers.............46, 264
Tie-Down Tracks......................... 304 Turbocharger Components......... 263 Water Pump/ Water Neck Hose
Timing Cover Fastener Kits.....58, 80, Turbocharger Gaskets................. 448 Adapters................................. 202
325, 330, 349 Turn Signal Flashers.............272, 371 Water Pumps - Electric.. 46, 133, 330,
Timing Cover Seals....................... 58 404-405
U-Joint Strap and Bolt Kits......72-73,
Timing Covers........................58, 133, 134 Water Pumps - Mechanical...............
229, 325, 345-346, 401-403, 409, 45, 183-184, 211, 330, 477, 498-499,
U-Joints ......................... 72, 134, 368 503, 528
435-436, 470, 484
Undercoatings.........131, 161, 289, 466 Water/Methanol Injection
Timing Lights........................199, 357
Universal Caps.................59, 102, 521 Components......................23, 469
Timing Pointers..... 59, 153, 346, 403,
435- 436, 470, 473 Vacuum Pumps..............133, 277, 458 Water/Methanol Injection Systems...
Timing Tape................................ 346 Vacuum Reservoirs...................... 471 24, 468
Tires. 129, 255-256, 302, 316-317, 390 Valley Pan Fastener Kits................ 80 Waxes...... 285, 299, 301, 311, 340-341,
Valve Cover Adapters and Spacers.... 390, 512, 534
Tool Trays................................... 233
101-102, 262 Weather Pack Pin Tools..49, 357, 426
Torque Arm Bushings and Mounts.....
508 Valve Cover Breathers and Weld In Bungs and Fittings.. 17, 21, 59,
Components.......102, 181-182, 325, 173, 217, 517, 521
Torque Arms and Components..... 92, 332-333, 345, 400-403, 408-409,
417, 508 Welders...................................... 536
430-431, 470, 473, 484-485 Welding Clamps.......................... 536
Torque Converter Fastener Kits.. 330 Valve Cover Fastener Kits..... 80, 102,
Torque Converter Lockup Kits.95, 121 Wheel Adapters........................... 491
332-333, 345, 400-402, 408-409,
Torque Converters and Components. 428-429, 431, 470, 485 Wheel Alignment Kits.................. 395
3, 96, 483 Valve Cover Filler Tubes and Caps..... Wheel Bearing Hub Assemblies... 446
Torsion Bars.................................257 102, 128, 325, 332-333, 345, 403, Wheel Bearings........................30, 74
Tow Hooks........................... 148, 304 430-431, 470 Wheel Center Caps and Hub Caps.....
Traction Bars and Components... 129, Valve Cover Gaskets.....332-333, 429, 471, 526, 529
275 470 Wheel Hub and Drive Flange Dust
Trailing Arm Fastener Kits.....256, 418 Valve Cover Hold-Down Tabs............. Covers....................................... 30
Transmission Crossmembers....... 93, 332-333, 345, 401-402, 428, 431, Wheel Lug Nut Washers.............. 224
120, 221-222, 252, 254, 483, 490 470, 485 Wheel Lug Nuts..... 109, 224, 313, 529
Transmission Fluid....................... 76, Valve Covers................... 59, 101, 154, Wheel Spacers..................... 346, 491
78, 124, 157, 158, 188, 299, 311, 320, 181-182, 210, 229, 249, 250-251, Wheel Stud....................... 70, 81, 335
343, 385, 444, 459, 460, 497 325, 331-332, 350, 400-402, 408-
409, 428-429, 470, 472, 484-485 Wheel Trim Rings..................129, 526
Transmission Fluid Additives...... 301, Wheel Tubs..................................149
344 Valve Stems and Components...... 76,
224 Wheel Wrenches......................... 224
Transmission Gaskets................. 330 Wheels........ 82, 109-110, 153, 155-156,
Vehicle Ramps.....................438-440
Transmission Indicators and 525-529
Components.................... 267, 269 Vents and Components.. 108, 154, 516
Vise Jaw Inserts.......... 13, 15, 109, 411 Windage Tray Fastener Kits......... 80,
Transmission Inspection Covers. 470 318-319, 328-329
Transmission Mounts... 185, 252, 254, Vises............................................537
Windage Trays and Components.......
411 Voltage Regulators and Components. 318-319, 324-329
Transmission Pan Drain Plug Kits.. 95 371, 500
Window Cranks............. 108, 128, 294
Transmission Pan Fastener Kits.... 80 Wastegates and Components..... 504
Window Louvers.......................... 155
Transmission Shifters............. 94-95, Water Neck Spacers/Risers.......... 46
Windshield Washer Pumps...........150
258-260, 296, 476 Windshield Washer Reservoirs..... 521
Transmission Wiring Harnesses.. 370 Windshield Wiper Blades............ 436

2023 - 2024 HOT ROD AND EARLY MUSCLE 547

INDEX

Windshield Wiper Components..... 89

Windshield Wiper Kits............89, 436
Wing and Spoilers and Components..
155
Wire Crimpers and Stripping Tools.4,
6, 49, 53, 335, 356, 423-424, 481
Wire Crimping Tool Dies............... 481
Wire Looms...... 57, 102, 211, 335-336,
348, 356, 403, 430, 481, 487
Wire Sleeve Install Tools..............375
Wire Tie Tools........................ 62, 136
Wiring Connectors and Terminals.....
7-8, 48-50, 356, 372, 375-376,
423-426
Wiring Pigtails....4, 11, 33, 49, 56, 197,
371-372, 388, 423, 465
Wrenches............................ 109, 220
Yokes.............................. 72, 134, 368
Zinc Anode...................................201
Zip Ties........................50-51, 62, 234

HushMat Ultra Sound Deadening and Thermal Insulation

Lightweight HushMat Ultra self-adhesive butyl rubber insulation with or without reflective heat barrier.
Sound-deadening material reduces aftermarket engine noise, exhaust drone, road noise, and vibration.
Reflective barrier provides thermal insulation to reduce heat from engine, headers, and exhaust. Made in
the USA.
Part No. Description
Ultra Floor, Dash Kits
HMT10400 12" x 23" Sheet, 1.5mm Thick, Rubber, 20 pieces
HMT10401 12" x 23" Sheet w/Heat Barrier, 1.5mm Thick, Rubber/Silver, 20 pieces
Ultra Door Kits
HMT10200 12" x 12" Sheet, 1.5mm Thick, Rubber, 10 pieces
HMT10201 12" x 12" Sheet w/Heat Barrier, 1.5mm Thick, Rubber/Silver 10 pieces
Ultra Bulk Kits
HMT10500 12" x 23" Sheet, 1.5mm Thick, Rubber, 30 pieces
HMT10501 12" x 23" Sheet w/Heat Barrier, 1.5mm Thick, Rubber/Silver, 30 pieces
Super Bulk Kit
HMT10800 18" x 32" Sheet, 1.5mm Thick, Rubber, 9 pieces
Hood Liner
HMT50100 12" x 23" Sheet, 1.5mm Thick, Rubber, 6 pieces
Ultra Trunk Kit
HMT10301 12" x 23" Sheet w/Heat Barrier, 1.5mm Thick, Rubber/Silver, 10 pieces

548 2023 - 2024 HOT ROD AND EARLY MUSCLE

2023 - 2024 HOT ROD AND EARLY MUSCLE 549
 InVision LCD Instrument Dash Panel
AutoMeter's sleek line of InVision HD digital dash display is like today's vehicle instrument display, but built for
yesterday's classic trucks and muscle cars. This complete dash system comes equipped and ready to monitor
the most important vitals: speedometer, tachometer, oil pressure, water temperature, fuel level, and voltmeter.
All instruments are displayed on a 12.3" high-definition color LCD screen. Includes pre-terminated, color-coded
universal wiring harness, sensors, adapters, and a panel-mounted joystick for programming.

ATM7007
ATM7000

ATM7008

Part No. Description

InVision HD
ATM7000 Universal 12.3" LCD Screen, Harness, Sensors, Kit
ATM7004 1973-87 GM Full-Size Truck Dash Panel, 12.3" LCD Screen, Harness, Sensors, Kit
ATM7005 1982-87 GM G-Body Dash Panel, 12.3" LCD Screen, Harness, Sensors, Kit
ATM7006 1995-98 GM Full-Size Truck Dash Panel,12.3" LCD Screen, Harness, Sensors, Kit
ATM7007 1987-93 Ford Mustang Dash Panel, 12.3" LCD Screen, Harness, Sensors, Kit
ATM7008 1969 GM F-Body Dash Panel, 12.3" LCD Screen, Harness, Sensors, Kit

550 2023 - 2024 HOT ROD AND EARLY MUSCLE

DOUG’S METALLIC CERAMIC COATING HEADERS
Doug’s Headers feature 3/8" thick machined flanges and CNC mandrel-bent
16-gauge, tubes with precision formed long transitions for balanced exhaust flow.
Pre-polished to remove scratches, they are finished with a metallic ceramic coating and
buffed to a high luster appearance that is heat resistant up to 1400°F. Pair of headers
includes gaskets, collector reducers, and hardware.
Part No. Description
DGHD308 1967-81 Camaro, 1964-77 Chevelle, 1968-74 Nova, 1970-74 Monte Carlo, Small Block, Full Length, 1-5/8" Primary, 3" Collector
DGHD313 1967-81 Camaro, 1964-77 Chevelle, 1968-74 Nova, 1970-74 Monte Carlo, Big Block, Full Length, 1-3/4" Primary, 3" Collector
DGHD316 1970-81 Camaro, 1968-77 Chevelle, Small Block, Full Length, 1-7/8" Primary, 3-1/2" Collector
DGHD320 1967-69 Camaro, 1968-74 Nova, Big Block, Full Length, 2" Primary, 3-1/2" Collector
DGHD329 1967-69 Nova, Small Block, Full Length, 1-3/4" Primary, 3" Collector
DGHD3336 1964-72 Chevelle, LS Swap, Full Length, 1-3/4" Primary, 3" Collector
DGHD3348 1963-72 GM Full-Size Truck, LS Swap, Full Length, 1-7/8" Primary, 3" Collector
DGHD3349 1964-67 Chevelle, LS Swap, Full Length, 1-7/8" Primary, 3" Collector
DGHD3350 1964-67 Chevelle, LS Swap, Mid-Length Tube, 1-7/8" Primary, 3" Collector
DGHD368 1967-69 Nova, Small Block, Full Length, 1-3/4" Primary, 3" Collector
DGHD380 1963-82 Corvette, Side-Mount Headers, Small Block, 1-7/8" Primary, 4" Collector
DGHD930 Corvette Side Tubes 46" Long, 4" Dia. Ceramic Metallic, Pair
DGHD950 Slip-In Glasspack Mufflers for 4" Dia. Side Tubes, Pair
DGHD952 Slip-In Glasspack Maximum Flow Mufflers for 4" Dia. Side Tubes, Pair
DGHD452 1963-72 Mopar B-Body, B/RB Big Block, Full Length, 2" Primary, 3-1/2" Collector
DGHD564 1964-67 Pontiac GTO, LeMans, Pontiac Heads, Full Length, 1-3/4" Primary, 3" Collector
DGHD567 1964-67 Pontiac GTO, LeMans, Edelbrock Heads, Full Length, 1-3/4" Primary, 3" Collector
DGHD570 1970-79 Pontiac Firebird, Pontiac, Full Length, 1-3/4" Primary, 3" Collector
DGHD581 1970-79 Pontiac Firebird, Pontiac, Full Length, 1-7/8" Primary, 3-1/2" Collector
DGHD669Y 1966-70 Ford Fairlane, Small Block, Full Length, 1-3/4" Primary, 3" Collector

ELECTRIC EXHAUST CUT-OUTS

Doug’s Electric Exhaust Cut-Outs are made from stain-
less steel and built to last. They feature Dayton gear
reduction motors, rack-and-pinion drive mechanisms,
self-cleaning knife edge seats for a leak-proof seal, and
waterproof connection wiring harness for easy installa-
tion.
Part No. Description
DGHDEC250A Dual 2.5" Electric Exhaust Cut-Outs Only, Stainless Steel, w/Wire Harness, Pair
Dual 2.5" Electric Exhaust Cut-Outs w/Transition Pipes, Stainless Steel, w/Wire
DGHDEC250AK
Harness, Pair
DGHDEC300A Dual 3.0" Electric Exhaust Cut-Outs Only, Stainless Steel, w/Wire Harness, Pair
Dual 3.0" Electric Exhaust Cut-Outs w/Transition Pipes, Stainless Steel, w/Wire
DGHDEC300AK
Harness, Pair

2023 - 2024 HOT ROD AND EARLY MUSCLE 551

 Street Series Crossmember-Back Stainless Exhaust Kits
Magnaflow Street Series Crossmember-Back Performance Stainless Exhaust Kits features fast-flowing,
mandrel-bent 2.5" stainless steel tubing, Tru-X crossover, straight-through mufflers exiting through 2.75" pol-
ished single wall-turndown, cut-edge tips. Direct-fit design with little modifications. Moderate exterior and mild
interior sound levels. Limited lifetime warranty.

MAG15893 MAG15898

Part No. Description Part No. Description

1964.5-66 Mustang V8 1967-69 Camaro/Firebird/Nova V8

Header-Back Dual Exhaust, With Tru-X Crossover,
MAG15815 MAG15896
Stainless 2.5" Pipes, 2.75" S/S Tips Stainless 2.5" Pipes, 2.75" S/S Tips
1967-70 Mustang V8 1970-73 Monti Carlo/Cutlass/GTO V8
With Tru-X Crossover, With Tru-X Crossover,
MAG15816 MAG15898
Stainless 2.5" Dia. 2.75" S/S Tips Stainless 2.5" Pipe, 2.75" S/S Tips
1964-67 Chevelle/Malibu/Cutlass/GTO V8 1967-74 Camaro/Firebird V8
With Tru-X Crossover, With Tru-X Crossover,
MAG15893 MAG15899
Stainless 2.5" Pipes, 2.75" S/S Tips Stainless 3" Pipe, 3" S/S Tips
1968-73 Chevelle/Malibu/Cutlass/GTO V8 1963-79 Mopar B-Body V8
With Tru-X Crossover, Header-Back Dual Exhaust,
MAG15894 MAG19303
Stainless 2.5" Pipes, 2.75" S/S Tips Stainless 2.5" Pipes, 2.625" S/S Tips

Rumble Turbo Mufflers

MagnaFlow Rumble turbo mufflers feature aluminized steel
construction, fully welded outer cases and spot-welded internal
baffling for superior structural support, providing corrosion
resistance, maximum performance and sound.
Part No. Description

2-1/2" Offset Inlet, 2-1/2" Center Outlet

MAGR22541 4-1/4" x 9-1/2" Oval Body, 19" Overall, Aluminized, Each
MAGR22543 4-1/4" x 9-1/2" Oval Body, 19" Overall, Aluminized, Each
3" Offset Inlet, 3" Center Outlet
MAGR23041 4-1/4" x 9-1/2" Oval Body, 19" Overall, Aluminized, Each
MAGR23043 4-1/4" x 9-1/2" Oval Body, 19" Overall, Aluminized, Each

552 2023 - 2024 HOT ROD AND EARLY MUSCLE

2 2023 - 2024 HOT ROD AND EARLY MUSCLE
 SPECIALTY ITEMS FOR YOUR NEXT
HOT ROD OR EARLY MUSCLE PROJECT

BRAKE ELECTRICAL
PART#ALL48037 PART#ALL76203

TOOLS AIR CLEANERS AND ACCESSORIES

PART#ALL11036 PART#ALL25911

AND MORE...

8300 Lane Drive, Watervliet, MI 49098

800-772-2678 • 269-463-4113 • Fax: 800-772-2618
www.motorstate.com