OPTIFLEX™

INTEGRATOR
HIGH SPEED ROUTING AND INTEGRATION
Part Number Part# EQT2
24 Vac Models: TBPL-24-H-A, TBPL-24-HM-A

INTEGRATOR FOR THE WEBCTRL® BUILDING AUTOMATION SYSTEM

The OptiFlex Integrator, model OFHI, supports routing between multiple BACnet networks. It also
supports custom control programs to easily integrate with third party BACnet or Modbus equipment
such as variable speed drives, boilers, and lighting.

KEY FEATURES AND BENEFITS

BACnet Features Hardware Features

Supports routing between BACnet/IP, BACnet/Ethernet, and BACnet Supports and executes control programs
MS/TP networks
Supports up to two BACnet/IP networks on the Gig-E port
Supports up to 1,500 third party BACnet points
Supports Gig-E, 1,000Mbps BACnet IP and DHCP IP
Supports up to two BACnet/IP networks on the Gig-E port addressing
Includes two additional BACnet ports to support either two Ethernet port provides local access for system start-up
simultaneous BACnet MS/TP networks (up to 127 controllers each) and troubleshooting
to simultaneously route and share data across a wide range of
Supports network captures for advanced diagnostic
building subsystems
Provides network statistics numerically or as trend
Can serve as a BACnet Broadcast Management Device (BBMD),
graphs inside the WebCTRL buiding automation system
routing any BACnet broadcast messages directly to other BBMD
devices on the BACnet network Supports DIN rail and screw mounting
Capacitor-backed real-time clock keeps time in the event of
Supports BACnet Foreign Device Registration (FDR)
power failure or network interruption for up to three days
Modbus Features Connects seamlessly to the WebCTRL building automation
Supports up to 1,000 Modbus points system

Serial networks: acts as a master or slave

TCP/IP networks: acts as a client or server

The WebCTRL building automation system gives you the ability to understand
your building operations and analyze the results. Integrate environmental, energy,
security and safety systems into one powerful management tool that helps you
reduce energy consumption, increase occupant comfort, and achieve sustainable
building operations.

1
SPECIFICATIONS

Part # OFHI
OptiFlex Integrator

Conforms to the BACnet Building Controller (B-BC), Standard Profile as defined in ANSI/ASHRAE Standard 135-2012
BACnet Conformance (BACnet) Annex L, Protocol revision 14.
BTL Listing | PICS | WPSCert Conformance Certificate
Control Program
Maximum number of control programs: 999 depending upon available memory.
Execution

BACnet Objects Maximum number of BACnet objects: 12,000 for programming purposes, depending upon available memory.

Third-Party Integration Supports up to 1,500 third-party BACnet integration points, and 1,000 Modbus integration points

24 Vac ±10%, 50–60 Hz, 50 VA

Power
26 Vdc ±10%, 15 W

Communication

Gig-E Port 10/100/1000 BaseT Ethernet port for BACnet/IP and/or BACnet/Ethernet and/or Modbus full duplex

For communication with either of the following:

Serial Port 1 • A BACnet MS/TP network at 9,600 to 115,200 bps
• A Modbus network at 9,600 to 115,200 bps
For communication with either of the following:
Serial Port 2 • A BACnet MS/TP network at 9,600 to 115,200 bps Australia and New Zealand: C-Tick Mark
AS/NZS 61000-6-3
• A Modbus network at 9,600 to 115,200 bps
BACnet International:
Local Access Port Ethernet port at 10 or 100 Mbps for system start-up and troubleshooting
BACnet Test Laboratories (BTL) BACnet Protocol Revision, Revision 9

Rnet Port Supports Up to 15 ZS wireless and/or ZS sensors, and one Equipment Touch or OptiPoint™ interface

24 Vac ±10%, 50–60 Hz, 50 VA

Power
26 Vdc ±10%, 15 W

Microprocessor To m
32-bit ARM Cortex-A8, 600 MHz, processor oumulti-level
with nt the Gcache
5REmemory, two Ethernet controllers, and USB 2.0 host port
Environmental Range 32 to 140º F (0 to 60º C); 10 - 90% relative humidity, non-condensing
The G5RE must be mounted in a metal enclosure or cabinet which is properly rated for the location
where
16 GBs eMMC Flash memory (120 MB available it is being
for use) installed.
and 256 MB DDR3 DRAM. User data is archived to non-volatile Flash
Memory
memory when parameters are changed, every 90 seconds, and when the firmware is deliberately shutdown or restarted.

Real Time Clock Real-time clock keeps track of time in the event of a power failure for up to 3 days
DIN rail mount
United States: FCC compliant to Title CFR47, Part 15, Subpart
1 Push B,pull
down and ClassoutA.the
ULcenter
Listed, File
tabs E143900;
shown below CCN PAZX,
to clear UL916,
the din Energy
rail trough on the back of the
Management Equipment; AS/NZS: RCM Mark 61000-6-3; router. Canada: UL Listed File E143900, CCN PAZX7, CAN/CSA C22.2 No.
Compliance 205 Signal Equip., Industry Canada Compliant, ICES-003, Class A; CE Mark Compliant with 2014/30/EU, and RoHS Compliant:
2015/863/EU; UKCA Mark compliant with Electromagnetic Compatibility Regulations 2016 – Gov.UK and RoHS for Electrical
and Electronic Equipment 2012.
Device is protected by a replaceable, fast acting, 250Vac, 2A, 5mm x 20mm glass fuse.
Protection
The power and network ports comply with the EMC requirements EN50491-5-2

Plastic Rating Fire-retardant plastic ABS, UL94-5VA

Mounting DIN rail mounting or screw mounting

Figure 1: Physical Dimensions

2 Place the router on the DIN rail so that the rail is in the trough on the back of the router.
in. cm
Width: 7.1 18.03
Height: 6.95 17.65
Depth: 2.09 5.31
Weight: 1.1 lbs .48 kg

Assembled in the United States

3 Push the center tabs towards the router until you hear them click.
4 Pull gently on the router to verify that it is locked in place.
1150 Roberts Boulevard, Kennesaw, Georgia 30144
770-429-3000 • Fax 770-429-3001 | automatedlogic.com | A Carrier Company
2
©2022 Carrier. All Rights Reserved. All trademarks used herein are the property of their respective owners. 11-8-2022