USER’S MANUAL

Price Computing Label

Printing Scale
Foreword
Thank you for your chose our Price Computing Label Printing Scale. Please read this
manual first before you use this scale, and please keep this manual for future reference
or use.

Precaution
 Please ensure the scale has been placed on a is level, strong and stable platform,
otherwise may cause the equipment to fall, cause equipment damage, or even
cause a fire or electric shock hazard.
 Don’t put the scale in the bad environment, otherwise it will affect the normal use
and shorten the scale service life:
1. Moisture, dust, heat, cold, vibration environment;
2. Direct sunshine, strong magnetic field, strong electric field, and high pressure
or close to the motor or other will produce high temperature and high pressure
environment.
 Don't bent power cord sharply, power cord should not be placed in easy be
trampled place, don't put heavy object on the power cord, otherwise it may cause
power cord damage or even cause a fire or electric shock hazard.
 Please grasp the insulated head of power cord to pull out plug from socket. Forced
to pull the power cord may damage the power cord and scale, even may cause a
fire or electric shock hazard.
 Don't use the damaged power socket or power cord, don’t attempt to repair them.
Continue to use the damaged power socket or power cord, may lead to the danger
of short circuit, electric shock, or even a fire.
 Power supply voltage input please strictly follows the product power requirements!
Beyond its range will cause equipment damage, or even cause a fire or electric
shock hazard.
 Don’t touch the power cord with wet hands, don’t wipe scale and power cord with
wet cloth, otherwise it may lead to the risk of electric shock.
 Don’t put conductive objects or liquid nearby the scale, to prevent the conductive
objects or liquid into scale body to avoid cause equipment damage, or even cause
a fire or electric shock hazard.

Special Requirement:
In order to make the scale work more stable, please make
sure that the input power with a reliable ground!

1 / 22
 CONTENT
1. Summarize ..................................................................................................................... 4
1.1 Structure and appearance ................................................................................... 4
1.2 Display .................................................................................................................. 4
1.2.1 Display Interface................................................................................................ 4
1.2.2 Status Indicators................................................................................................ 5
1.3 Standard keyboard layout .................................................................................... 5
1.4 Keys and function of keyboard ............................................................................ 5
1.5 Function & Features............................................................................................. 6
1.6 Key Parameters.................................................................................................... 6
1.7 How to load label paper roll ................................................................................. 7
2. Sales Operation............................................................................................................. 8
2.1 Preparation and Inspection before usage........................................................... 8
2.2 Power on............................................................................................................... 8
2.3 Selling by weight .................................................................................................. 8
2.4 Selling by package ............................................................................................... 8
2.5 Selling by fixed weight ......................................................................................... 8
2.6 Change price in sale process .............................................................................. 9
2.7 Discount selling .................................................................................................... 9
2.8 View date and time of system.............................................................................. 9
3. Menu and setting operation ...................................................................................... 10
3.1 How to open and exit menu interface................................................................ 10
3.2 Menu and setting operation ............................................................................... 10
3.2.1 Open sub-menu and setting interface methods............................................. 10
3.2.2 Parameters setting .......................................................................................... 10
3.2.3 Change input method ...................................................................................... 10
3.2.4 Special characters input .................................................................................. 10
3.2.5 Exit menu and setting status........................................................................... 11
3.2.6 Menu list and function description .................................................................. 11
4. System Setting ............................................................................................................ 11
4.1 Date & time ......................................................................................................... 11
4.2 Network............................................................................................................... 11
4.2.1 IP Address ....................................................................................................... 11
4.2.2 MAC Address................................................................................................... 11
4.3 Hotkey................................................................................................................. 11
4.4 String ................................................................................................................... 11
4.5 Message ............................................................................................................. 11
4.6 Edit the label format ........................................................................................... 12
4.7 Idel Message ...................................................................................................... 13
5. Parametes Setting....................................................................................................... 13
5.1 System and label parameters setting................................................................ 13
6. PLU Setting .................................................................................................................. 15
6.1 Set PLU............................................................................................................... 15
2 / 22
 6.3 Delete PLU ......................................................................................................... 16
6.4 Delete All PLU .................................................................................................... 16
7. Reports Management ................................................................................................. 16
8. Factory Setting ............................................................................................................ 17
8.1 Reset system setting .......................................................................................... 17
8.2 Restore factory setting ....................................................................................... 17
9. System Test ................................................................................................................. 17
9.1 Printer test .......................................................................................................... 17
10. View software version information ........................................................................ 17
11. Error and common troubleshooting ...................................................................... 17
Appendix A. Default label printing format .................................................................. 19
Appendix B. Default system parameters..................................................................... 20
Appendix C. Menu Lists and function description .................................................... 20

3 / 22
1. Summarize
1.1 Structure and appearance

Display

Power and Power Switch

communication (In the left behind of
interface bottom)
(In the left front of
bottom)

Pan

Level

Keyboard

Foot

Printer cover
Label export

1.2 Display
1.2.1 Display Interface

[Menu Display interface] [Selling by weight interface]

4 / 22
1.2.2 Status Indicators (>) (on the right side of the display)
1. AUTO: Display when in automatic printing status.
2. LOCK: Display when the current commodity in locked status.
3. UNIT: Units of measurement (Display weight unit (e.g.: kg, g, lb) when selling by
weight, display “pcs” when in selling by package.)
4. ZERO: Display when scale in “zero” status (the weight is zero).
5. STABLE: Display when scale weighing in stable status.
6. TARE: Display when you pressed [TARE] key to remove tare.
7. SHIFT: Display when you pressed [SHIFT] key.

1.3 Standard keyboard layout

PLU Hot-keys Function keys

1.4 Keys and function of keyboard

Key Function
NUMERIC Number and letter entering(0-9 and a-z)
HOT KEY Key for direct sales (1-112&123-224)
MENU Enter and quit menu
RE-PRINT Repeat print
↑ Select the upper item
↓ Select the next item
← Move the cursor to left one character position
→ Move the cursor to right one character position
SHIFT Select 2nd function or Select Input Method
CLR Return to the previous menu, or clear all the input information
ON/OFF Press and hold two seconds into sleep status
FEED Feed one label paper
DISC% Discount at percent
EXTRA% Additional at percent
VOID Cancel current sales operation
PLU PLU No. key to get product information
PRICE Temporarily change the current selling price of goods
When you need to operate continuously of the same commodity, the
LOCK
commodity can be locked

5 / 22
 Enable or disable print pricing labels automatically when weighing in
AUTO PRINT
stable status.
Enter the quantity of selling by package or quantity (goods must have
PACKAGE/×
been set to sell by package or quantity first.)
TARE Remove tare
RE-ZERO Return to zero status
BACKSPACE Delete a character before cursor
OK Operation confirm

1.5 Function & Features

 10000 PLUs storage capacity and PLU data can be modified easily.
 224 (112×2) PLU hot-keys can be edited and makes sales operation more quickly.
 Printing parameters and label code setting can be easily edited.
 Label code format designation is convenient.
 Label printing quantity and sales amount can be sorted by PLU code.
 Multiple discount modes available. Amount before and after discount shown.
 Easy communication in two network ways: RS-232 and LAN (Ethernet).
 Programming and setting can be done in computer and then uploaded to scale via
RS-232 port or LAN (Ethernet) port.

1.6 Key Parameters

ITEM PARAMETERS
Precision 1/3000 F. S
Weighing scope 0-6Kg-15Kg or 0-15-30Kg
Weighing Resolution 2/5g or 5/10g
Storage Capacity 10,000 PLUs
4-inch color TFT-LCD (320×240 dots matrix)
- Name of commodity: 13 letters
Display - Weight: 5 figures
- Unit price: 7 figures
- Total price: 8 figures
Keyboard 140keys (112×2=224 PLU Hotkeys, 32 Function keys)
Printing Method: thermal printing
Resolution of level: 8dots/mm
Printing feature
Printing speed: 60mm/s
Printing life: ≥150km
Thermal printing label paper
- Label width: 30-60mm
-Label length: 25-48mm
Printing paper
- Paper roll internal diameter: ≤80mm
- Paper roll outer diameter: ≥42mm
- Interval space between labels: 2-3mm
Printing font 12×24 dot: 1.5mm(W) ×3.0mm(H)
Communication ports 1×RS232 Serial, 1×RJ45 Ethernet
Power supply AC100-120V or AC200-240V, 50/60Hz
Normal status: 5W
Power consumption
Printing status: 50W
Built-in battery None
Environmental Storage temperature: -20℃ ~ 50℃
Requirements Working temperature: -10℃ ~ 40℃
6 / 22
 Storage humidity: 10% ~ 95% RH
Working humidity: 20% ~ 90% RH
Scale size (cm) 36(W)×44(D)×17.5(H) (the height is 49cm with display pole)
Package size (cm) 49(W)×48.5(D)×23(H)
Net weight About 7.5Kg
Gross weight About 9.3Kg

1.7 How to load label paper roll

1. Make sure that the scale has been power off status.
2. Open the printer’s cover on the right side.
3. Use a finger grasp the “drag out point” on the base of the printer and drag the printer
out of scale.
4. Pull out pinch plate, open turning head of label printer according to the instruction,
namely ① in the image.
5. Put the front of label roll into paper collect reel, according to ② in the image. Then
turn paper collect reel 2 or 3 turns and the direction refers to ③. So that point A
happens to stop at the gap of two labels.
6. Turning label printers head snaps into place, the direction according to ④, there
would be a click sound when in the correct place.
7. Push the printer into scale and close the cover.
8. Turn on the power, waiting the scale to finish initialization work, then press [FEED]
key to feed the label to correct print position.

Precautions:
1. Label paper should be properly guided by the axis and adjust the width of the guide
limiter.
2. Printed Each five-volume labels or found printing is not clear enough, you should
gently wipe clean the thermal print head heating line (black line) with a cotton swab
dipped a little alcohol (Attention please! Hard material clean the thermal head is
forbidden to avoid damage the thermal print head).

7 / 22
2. Sales Operation
2.1 Preparation and Inspection before usage
1. Ensure the scale placed on a platform which is level, strong enough and stable.
2. Check the power supply voltage conforms to the requirements of the equipment
input power; the power cord plug connection is reliable.
3. Ensure the four feet of scale are contact with platform, scale body no shake.
4. Check the level bubble whether in a central location (as shown in the figure below),
if it not in a central position, you need to adjust the height of feet to make it in the
central position.
5. Ensure there is nothing on the scale body which is not the part of scale.
6. Ensure the label paper was loaded correctly and sufficient quantity.

Correct Wrong
2.2 Power on
1. Ensure there is nothing on scale pan.
2. Open the power switch.
3. Waiting the scale to finish initialization work.
4. Check the "ZERO" indicator at the right side of screen is display or not, and weight
value display is zero or not, otherwise press [RE-ZERO] key to reset scale to zero.
5. Check the "STABLE" indicator at the right side of screen is display or not, if it
displayed, then the scale is in the ready state for sales work.

2.3 Selling by weight

When the scale be in ready status (shown as left picture in section 3.1):
1. Ensure there is nothing on scale pan.
2. Check the "ZERO" indicator is displayed (Otherwise press [RE-ZERO] key to reset
scale to zero).
3. (Optional) Tare: Put tray or package of commodity on the scale pan, and then
press [TARE] to remove the tare weight, then the weight value displayed will
become "0.000" and “TARE” indicator displayed.
4. Place the commodity on scale pan center gently.
5. Call out the commodity information for sales.
 Method 1: Enter the PLU No. then press [PLU] key.
 Method 2: Press hotkey.
6. (Optional) Discount operation: See section 2.7 description.
7. Press [OK] key to print a pricing label.
Note: 1) Only those commodities which sales type was set to “weight” can be sold by
weight. 2) Unit displayed at the right side of screen is weight unit (such as “Kg”).

2.4 Selling by package

When the scale be in ready status (shown as left picture in section 3.1):
1. Call out the commodity information for sales.
 Method 1: Enter the PLU No. then press [PLU] key.
 Method 2: Press hotkey.
2. (Optional) Discount operation: See section 2.7 description.
3. Press [OK] key to print a pricing label.

8 / 22
Note: 1) Only those commodities which sales type was set to “Package” can be sold by
package. 2) Unit displayed at the right side of screen is “pcs”.

2.5 Selling by fixed weight

When the scale be in ready status (shown as left picture in section 3.1):
1. Call out the commodity information for sales.
 Method 1: Enter the PLU No. then press [PLU] key.
 Method 2: Press hotkey.
2. (Optional) Discount operation: See section 2.7 description.
3. Press [OK] key to print a pricing label.
Note: 1) Only those commodities which sales type was set to “Fixed weight” can be
sold by fixed weight. 2) Unit displayed at the right side of screen is “pcs”.

2.6 Change price in sale process

When the scale be in ready status (shown as left picture in section 3.1):
1. Call out the commodity information for sales (See section 2.3, section 2.4 and
section 2.5 descriptions).
2. Enter new price of commodity.
3. Press [Price] key.
4. Press [OK] key to print a pricing label.
Note: 1) Only those commodities which “Price changeable?” item in “Set PLU” menu
was set to “Yes” can change price in sale process. 2) Changing price operation is only
valid for this time operation, does not modify the price stored in system memory.

2.7 Discount selling

When the scale be in ready status (shown as left picture in section 3.1):
1. Call out the commodity information for sales (See section 2.3, section 2.4 and
section 2.5 descriptions).
2. Discount operation:
 Method 1: According to “discount type” set in “Set PLU” menu to discount:
Press [DISC%] key directly.
 Method 2: Enter a new discount percent then press [DISC%] key.
3. Press [OK] key to print a pricing label.
Note: Only those commodities which “Discount enable?” item in “Set PLU” menu was set
to “Yes” can discount in sale process.

2.8 View date and time of system

When the scale be in ready status (shown as left picture in section 3.1):
1. Press [PACKAGE] key to show system current date and time.
2. Press [OK] key or [CLR] key to return to ready status

9 / 22
3. Menu and Setting operation
3.1 How to open and exit menu
 When the scale be in ready status, press [Menu] key to open level 1 menu
interface.
 In menu or setting status, press [Menu] key to exit to ready status.

[Ready status interface] [Level1 menu interface]

3.2 Menu and setting operation

3.2.1 Open sub-menu and setting interface methods
Method 1: Press [↑] [↓] keys to move the cursor to the
appropriate menu item, then press [OK] key to open a
sub-menu or menu item setting interface.
Method 2: Directly press the last digit key of the number in
front of the menu item to open a sub-menu or menu item
settings interface. (Note: With this method are described
below)
Example: When the screen shown as right side image, press [2] numeric key will open
the "Network Setting" sub-menu.

3.2.2 Parameters setting

 If a set of parameters as the input item, usually need to press [backspace] or [CLR]
key to delete has set the values of the parameters, and then enter the new
parameter values.
 If the set parameters for the option, press [↑] or [↓] t key to switch between various
options, or direct input options in front of the Numbers.
 Save Setting: all parameters setting need to press [OK] key to save then it will take
effect.
Note:
After pressing [OK] key to save parameters, display will return to the menu interface or
turn to the next parameter Settings interface directly. If you don’t want to change
someone parameter setting, you can press [OK] key to jump it to next parameter setting
interface.

3.2.3 Change input method

Press [↑], [↓] or [SHIFT] key to select your input method.

3.2.4 Special characters input

Press [1] or [0] key to select enters special character when current input method is “ABC”
or “abc”, such as “.”, “!”, “@”, and so on.

10 / 22
3.2.5 Exit menu and setting status
 Press [Menu] key to end menu and setting operation, and exit to ready status.
 Press [CLR] key return previous menu.

3.2.6 Menu list and function description

See page 20 — “Appendix C: Menu list and function description”

4. System Setting
4.1 Date & time
1. When the scale be in ready status, press [Menu] key to open the menu interface.
2. Press the [1] numeric key to open sub-menu of “System setting”.
3. Press the [1] numeric key to open “Date & time” setting interface.
4. Enter a new date (format: YYYYMMDD)Press [OK] key.
5. Enter a new time (format: HHMMSS)Press [OK] key to display new date and
time.
6. Press [OK] key to exit.

4.2 Network
4.2.1 IP Address
1. When the scale be in ready status, press [Menu] key to open the menu interface.
2. Press the [2] numeric key to open sub-menu of “Network”.
3. Press the [1] numeric key to open “IP” setting interface.
4. Enter a new IP AddressPress [OK] key.

4.2.2 MAC Address

1. When the scale be in ready status, press [Menu] key to open the menu interface.
2. Press the [2] numeric key to open sub-menu of “Network”.
3. Press the [2] numeric key to open “MAC” setting interface.
4. Enter a new MAC Address (8 figures) Press [OK] key.

4.3 Hotkey
1. When the scale be in ready status, press [Menu] key to open the menu interface.
2. Press the [1] numeric key to open sub-menu of “System setting”.
3. Press the [3] numeric key to open “Hot key” setting interface.
4. Enter a PLU No.Press [OK] key.
5. Press a hotkey on keyboard for above Entered PLU No..
6. Repeat step 4 and step 5 operations to others hotkey.
7. Press [CLR] key to exit.

4.4 String
1. When the scale be in ready status, press [Menu] key to open the menu interface.
2. Press the [1] numeric key to open sub-menu of “System setting”.
3. Press the [4] numeric key to open “String” setting interface.
4. Enter an index of string (1-8) Press [OK] key.
5. Enter the content of string (Up to 24 characters) Press [OK] key to finish setting.

4.5 Message
1. When the scale be in ready status, press [Menu] key to open the menu interface.
2. Press the [1] numeric key to open sub-menu of “System setting”.

11 / 22
 3. Press the [5] numeric key to open “Message” setting interface.
4. Enter a index of string (1-255)Press [OK] key.
5. Enter the content of message (Up to 96 characters) Press [OK] key to finish
setting.

4.6 Edit the label format

1. When the scale be in ready status, press [Menu] key to open the menu interface.
2. Press the [1] numeric key to open sub-menu of “System setting”.
3. Press the [6] numeric key to open “Label format” setting interface,
ITEM OPERATION ILLUSTRATION
Index of label printing items(1-32):
1. Internal code
2. Product name
3. PLU code
4. Price
5. Weight
6. Amount after discount
7. Label code
8. Date
9. Effective days
10. Frame
11. Time
12. Amount before discount
13. Expiry date
14. Discount rate
-Enter the Index of label printing 15. Title 1
Item index
item. 16. Title 2
(1~32)
-Press [OK] key 17. Title 3
18. Title 4
19. Title 5
20. Title 6
21. Title 7
22. Title 8
23. Title 9
24. Letter string 1
25. Letter string 2
26. Letter string 3
27. Letter string 4
28. Letter string 5
29. Letter string 6
30. Letter string 7
31. Letter string 8
32. Explanation text
-Set to print it or not
ON/OFF? 1: ON; 2:OFF
-Press [OK] key
-Set printing font-size 1:Normal; 2:Double width; 3:Double
Font
- Press [OK] key height; 4:Double size
-Set printing direction 1: 0 degree; 2:90 degree;
Orientation
- Press [OK] key 3: 180 degree; 4:270 degree;
-Select the index of title item Title index (1-23):
Title
(1-23) 1:NAME 2:WEIGHT(g)
12 / 22
 - Press [OK] key 3:PRICE($/100g) 4:AMOUNT
5:PACK DATE 6:MATERIAL
Note: Just at step 1 "Item index" 7:VALI DATE 8:NET WEIGHT
is selected for this setting will 9:DATE 10:EDIBLE METHODS
appear when 15-23 (Title 1-9). 11:PRESERVING 12:PLU CODE
METHOD
13:TOTAL 14:PLU
AMOUNT($)
15:g 16:WEIGHT
17:PRICE 18:$
19:$/100g 20:$/500g
21:$/kg 22:kg
23:EXP DATE
X -Enter the left position of Unit of length is 0.1mm, Value: integer
(0.1mm, printing between 0 and 558, e.g.: 5mm should
0~558) -Press [OK] key be set to 50.
Y -Enter the top position of Unit of length is 0.1mm, Value: integer
(0.1mm, printing between 0 and 478, e.g.: 5mm should
0~478) -Press [OK] key to finish setting be set to 50.
Note: can store up to five formats. See "label format" in section 5.1.

4.7 Idle Message

1. When the scale be in ready status, press [Menu] key to open the menu interface.
2. Press the [1] numeric keys to open sub-menu of “System setting”.
3. Press the [7] numeric keys to open “Idle message” setting interface.
4. Enter the content of standby information (Up to 80 characters) Press [OK] key to
finish setting.

5. Parameters Setting
5.1 System and label parameters setting
When the scale be in ready status, press [Menu] key to open the menu interface Press
the [2] numeric keys to open “Para setting” interface.
ITEM OPERATION ILLUSTRATION
-Enter the scale No.
Scale No. Integer between 0 and 99999999
-Press [OK] key to save
Paper W Unit of length is 0.1mm, Value: integer
-Enter the printing width
(0.1mm, between 300 and 560, e.g.: 56mm
-Press [OK] key to save
300~560) should be set to 560.
Paper H Unit of length is 0.1mm, Value: integer
-Enter the printing height
(0.1mm, between 250 and 480, e.g.: 37mm
-Press [OK] key to save
250~480) should be set to 370.
-Enter the interval space of Unit of length is 0.1mm, Value: integer
Paper span
labels between 10 and 50, e.g.: 2mm should
(0.1mm,10~50)
-Press [OK] key to save be set to 20.
Printer gray -Enter the printing gray 1~10 class, more great more dark.
(1~10) -Press [OK] key to save Default is 7.
-Set the peel inspection is
Paper Sensor enable or not 1:ON; 2:OFF
-Press [OK] key to save

13 / 22
 -Set whether print
PLU name
commodity’s name in middle 1:ON; 2:OFF
center
-Press [OK] key to save
Type of label code as following:
1: POS code + Sales amount(not round
Kopeck)
2: POS code + Weight
3: POS code + Price
4: POS Code
5: POS Code + Weight (5 Digits) +
Sales amount (round Kopeck) (18
digits)
6: POS code + Sales amount(round
Kopeck)
7: POS code + Weight (5 digits) + Sales
-Select the composition of amount (not round Kopeck) (18 digits)
Barcode barcode data types 8: POS code + Sales amount (round
-Press [OK] key to save Kopeck+ Weight(5 digits) (18 digits)
9: POS code + Sales amount(not round
Kopeck) + Weight (5 digits)(18 digits)
10: 1 + Weight + POS Code
11: POS code + Price+ Weight (5
Digits) (18 digits)
12: POS Code + Weight (5 digits) +
Price (18 digits)
Note:
Not round Kopeck = last digit is
Kopeck. e.g.: 2.22 USD
Round Kopeck = last digits is 10
Kopeck. e.g.: 2.2 USD (rounding)
-Enter the length of PLU
PLU code LEN code 1-8 figures
-Press [OK] key to save
-Set the PLU code style
PLU code style 1:Prefix+code; 2:Only code
--Press [OK] key to save
-Set the prefix of PLU code
Prefix Integer between 0 to 99
-Press [OK] key to save
- Set the number it represent Represents the number of package or
QTY in barcode quantity in barcode fixed weight for goods
--Press [OK] key to save 1: 1PCS=1000(×1000); 2: 1PCS=1(×1)
1: Decimal 3 round;
-Set decimal places rounding 2: Decimal 3 remove;
Round
-Press [OK] key to save 3: Decimal 2 round;
4: Decimal 2 remove;
-Set the unit of weight 1: Kg;
Weight unit
-Press [OK] key to save 2: g
-Set the weight of unit price
Price unit 1: Per Kg; 2: Per 100g; 3: Per 500g
-Press [OK] key to save
Price -Set whether can change
1: Yes; 2: No
changeable? price in sale process

14 / 22
 -Press [OK] key to save
-Set whether can discount in
Discount
sale process 1: Yes; 2: No
enable?
-Press [OK] key to save
1: Don’t Print date;
-Set whether print date on
2: Print packing date;
Date type label
3: Print EXP date;
-Press [OK] key to save
4: Print both date (packing and EXP)
-Enter the default shelf life
DEF. EXP
(day) Integer between 0 and 99999
date(day)
-Press [OK] key to save
-Set whether enable
STAT. report statistics report function 1:ON; 2:OFF
-Press [OK] key to save
-Enter the index of label Can store up to five formats (0-4)
Label format format Note: After setting this item, the section
index -Press [OK] key to save and "4.6" edit the label format is set for this
exit setting index.

6. PLU Setting
6.1 Set PLU
When the scale be in ready status, press [Menu] key to open the menu interface Press
the [3] numeric key to open sub-menu of “PLU setting” Press the [1] numeric key open
“Set PLU” interface, then set the parameters as following one by one:
ITEM OPERATION ILLUSTRATION
If the PLU No. is existed then into
-Enter PLU No.
PLU No. modify status, otherwise, into add
-Press [OK] key
status.
-Enter PLU Code.
Barcode Commodity code (Part of barcode)
-Press [OK] key
-Enter the name of commodity.
Name
-Press [OK] key
-Enter the price of commodity.
Price
-Press [OK] key
-Set sales type
Type 1: Weight; 2: Package; 3: Fixed weight
-Press [OK] key
Fixed weight -Enter the fixed weight Only valid and appear for goods which
(g) -Press [OK] key selling by fixed weight
Tare weight -Enter the tare weight Only valid and appear for goods which
(g) -Press [OK] key selling by weight
1:Don’t print date; 2:Print packing date;
-Set whether print date on label
Date type 3:Print EXP date; 4:Print both
-Press [OK] key
date(packing and EXP)
Def. exp -Enter the shelf life (day)
1 to 5 figures
date (day) -Press [OK] key
Price -Set whether can change price
1: System default; 2: Yes; 3: No
changeable? -Press [OK] key
Discount -Set discount mode 1:No discount; 2:Special price;
mode -Press [OK] key 3:Percent(%); 4:Coupon
15 / 22
 -Enter special price Only valid and appear for discount
Special price
-Press [OK] key mode set to special price
-Enter discount percent Only valid and appear for discount
Percent (%)
-Press [OK] key mode set to Percent
-Enter the amount of coupons Only valid and appear for discount
Coupon
-Press [OK] key mode set to coupon.
This message is set in the menu item
Message -Enter message of commodity
"1.5. Message (1 to 255)", can be set
(1~255) -Press [OK] key to finish setting
up 255PCS.
Note:
1. PLU Code: It is a commodity code, is a part of label barcode data representing a
commodity, this code requirements consistent with the cash register system
commodity codes for this commodity.
2. PLU No.: It is a short code of commodity. Usually use it to set hotkey of commodity.
Salesperson usually press hotkey or enters this No. then press [PLU] key to bring
up to sell commodity.

6.2 Delete PLU

1. In ready status, press [Menu] key to open the menu interface.
2. Press the [3] numeric keys to open sub-menu of “PLU Setting”.
3. Press the [3] numeric keys to select “Del PLU” function
4. Enter the PLU code which will be deleted.
5. Select “Yes” Press [OK] key to execute.

6.3 Delete All PLU

1. In ready status, press [Menu] key to open the menu interface.
2. Press the [3] numeric keys to open sub-menu of “PLU Setting”.
3. Press the [3] numeric keys to select “Del all PLUs” function
4. Select “Yes” Press [OK] key to execute.

7. Reports Management
In ready status, press [Menu] key to open the menu interface Press the [4] numeric key
to open “Reports” interface.
ITEM OPERATION ILLUSTRATION
Press [OK] key to view the View the first label printing time after
Date & Time
next item the last time delete report data.
Daily Total Press [OK] key to view the View the first label printing time after
Amount next item the last time delete report data.
Daily Label Press [OK] key to view the View the first label printing time after
Count next item the last time delete report data.
Clear-out - Select “Yes” or “No” Delete all report data and can’t regain,
Report - Press [OK] key to execute please do it be careful!
Note: You need to enable the “Static report” function in “PARA setting” in menu, then the
scale will automatically records and add up related data.

16 / 22
8. Factory Setting
8.1 Reset system setting
1. In ready status, press [Menu] key to open the menu interface.
2. Press the [5] numeric key to open sub-menu of “Factory setting”.
3. Press the [1] numeric keyEnter password (“12345678”) Press [OK] key to
execute “Reset system setting“ function.
4. The scale will re-boot.
Note: This operation will restore the scale settings for all parameters to the initial state of
the factory, but it does not delete the PLU information, reports and other user data.

8.2 Restore factory setting

1. In ready status, press [Menu] key to open the menu interface.
2. Press the [5] numeric key to open sub-menu of “Factory setting”.
3. Press the [2] numeric keyEnter password (“12345678”) Press [OK] key to
execute “Restore factory setting” function.
4. The scale will re-boot.
Note: This operation will restore the scale settings for all parameters to the initial state of
the factory, and it will delete the PLU information, reports and all others user data
and can’t regain, please do it be careful!

9. System Test
9.1 Printer test
1. In ready status, press [Menu] key to open the menu interface.
2. Press the [6] numeric key to open sub-menu of “System test”.
3. Press the [1] numeric key or [OK] key to execute “Printer test” function.

10. View software version information

1. In ready status, press [Menu] key to open the menu interface.
2. Press the [7] numeric key to displays the current software version information.
3. Press [OK] key to exit.

11. Error and common troubleshooting

Before you inform the technique representative, you may refer the common
troubleshooting as the following list. Many questions maybe occur do not because of
the quality of the product rather a simple incorrect operation.
Eorrors Discription
ERR-01 Invalid PLU code
ERR-02 Invalid PLU No.
ERR-03 Difference price when resale
ERR-04 No print paper
ERR-05 Forbid change price
ERR-06 PLU not found
ERR-07 Wrong IP format
ERR-08 Wrong date or time
ERR-09 Invalid key input
ERR-10 Quantity or weight error
ERR-11 Money error
ERR-12 Memory full
17 / 22
 ERR-13 Data input error
ERR-14 Data in memory error
ERR-15 Label Paper haven’t peeled
ERR-16 Wrong MAC address format
ERR-17 Amount of money overflow
ERR-18 U-Disk error
Common troubleshooting:
1. The screen does not display, or the display is not normal.
Check: The connection of display cable is properly connected, whether loose or
completely embedded in the card in place.
Solution: In the power off status, reconnect the display cable, then power on again.
2. Turn on the power switch, the scale does not power on and booting.
Check: 1) the scale is connected to the power cord mains power outlet if there is
electricity or not. 2) The power cord from the mains socket contacts is reliable. 3)
The end of the power cord connected to a power outlet and scale reliability. 4) The
fuse of scale is intact or not. 5) The power switch of scale is good.
Solution: The power switch is in turn off (dial to the "O" logo side) statue, one by
one to check the above items, after confirming that no problems then re- boot.
3. Can’t communicate with computer.
Check: 1) communication cable is good. 2) Communication cable to the scale and
the computer are connected reliably. 3) PC software and scale software settings
are correct. 4) The connected communication port of computer is good.
Solution: The power switch is in turn off (dial to the "O" logo side) statue, one by
one to check the above items, after confirming that no problems then re- boot.
4. Weighing accuracy deteriorates, or inaccurate.
Check: 1) There is something under scale pan or not. 2) level is in the horizontal
position.
Solution: The power switch is in turn off (dial to the "O" logo side) statue, one by
one to check the above items, after confirming that no problems then re- boot.
Note: After checking process described above, if the fault persists, do not
self-disassemble, and promptly contact your dealer or our service personnel to deal
with matters related to maintenance.

18 / 22
Appendix A. Default label printing format
Space
Print Letter Printing
Label editing item Width Height Title at X-axis Y-axis
or not font direction
edge
1 Internal code 0
2 Product Name 1 3 0 10 74
3 PLU Code 0 10 106
4 Price 1 1 0 52 106
5 Weight 1 1 0 105 138
6 Amount after
1 1 0 355 106
discount
7 Label code 1 0 3 50 10 0
8 Date 1 0 0 345 138
9 Effective days 0
10 Rectangle 0
11 Time 0
12 Amount before
0
discount
13 Expiry date 1 0 0 265 154
14 Discount rate 0
15 Title 1 1 1 0 17 10 106
16 Title 2 1 1 0 21 110 106
17 Title 3 1 1 0 8 10 138
18 Title 4 1 3 0 22 170 138
19 Title 5 1 1 0 13 224 106
20 Title 6 1 0 0 5 224 138
21 Title 7 1 0 0 23 224 154
22 Title 8 0
23 Title 9 0
24 Letter string 1 1 3 0 60 190
25 Letter string 2 0
26 Letter string 3 0
27 Letter string 4 0
28 Letter string 5 0
29 Letter string 6 0
30 Letter string 7 0
31 Letter string 8 0
32 Explanation text 0
Note: No.10 Rectangle Function only in Software Version 1.08 or above.

19 / 22
Appendix B. Default system parameters
Setting parameters Value Discription
Sacle No. 1
Label width 448 448 x 0.125mm = 56mm
Label height 296 296 x 0.125mm = 37mm
Label internval space 20
Printing greyness 7 More larger more deep
Label paper peeling check 1 Enable
PLUS printed in the centre 1 Yes
Code + Sales amount
Label code type 0
(Not rounding Kopeck)
POS code length 7
POS code type 0 Prefix+Internal code
POS code prefix 29
Sales amount roudning type 0 Rounding at the 3rd. digits
Weight unit 0 kg
Price unit 0 /kg
Allow temporary price change 0 No
Allow Discounts 0 No
Lock the PLU function 0 Disable
Automatic printing function 0 Disable
Default printing date-time 3 Packaging date and effective date
Report Statistics 0 Disable

Appendix C. Menu lists and function description

Menu Items Function
1.System Setting
1.1.Date & time
1.1.1.Date (YYYYMMDD) Set system date (e.g.: 20131230)
1.1.2.Time(HHMMSS) Set system date (e.g.: 123000)
1.2.Network
1.2.1.IP Set IP address of Ethernet (e.g.: 192.168.1.187)
1.2.2.MAC Set MAC address of Ethernet (e.g.: 12345678)
1.3.Hot key Hotkey corresponding PLU No.
1.4.String
1.4.1.STR index (1~8) Index of string
1.4.2.String Content of string
1.5.Message (1~255)
1.5.1.MSG index (1~255) Index of message
1.5.2.Message(1~255) Content of message
1.6.Label forma Edit the format of label printing
1.7.Idel message Display content when scale in standby status

2.PARA Setting
2.1.Scale No. Scale No. (Integer between 0 and 99999999)
20 / 22
2.2.Paper W
Width of label paper
(0.1mm，300~560)
2.3.Paper H
Height of label paper
(0.1mm，250~480)
2.4.Paper span
Interval space between labels
(0.1mm，10~50)
2.5.Printing gray (1~10) Printing
2.6.Paper sensor Set the peel inspection is enable or not
2.7.PLU name
Set whether print commodity’s name in middle
center(1~2)
2.8.Barcode Select the composition of barcode data types
2.9.PLU code LEN(1~8) Length of PLU code
2.10.PLU code
PLU code style (1:Prefix+code; 2:Only code)
style(1~2)
Prefix of PLU code (Used to distinguish different types
2.11.Prefix
commodity)
Represents the number of package or fixed weight for
2.12.QTY in barcode
commodity in barcode.
(1~2)
1: 1PCS=1000(×1000); 2: 1PCS=1(×1)
2.13.Round Decimal places rounding of amount
2.14.Weight unit Such as “Kg”, “g” and so on
2.15.Price unit Weight of unit price (1: Per Kg; 2: Per 100g; 3: Per 500g)
2.16.Price changeable?
Whether can change price in sales process
(1~2)
2.17.Discount Enable? Whether can discount in sales process
Whether print date information on label and the type of date
2.18.Date type
for printing
2.19.DEF.EXP
Default shelf life of commodity (day)
Date(day)
2.20.Static report Whether enable statistics report function
2.21.Label format index Set the index of label format for choice

3.PLU Setting
3.1.Set PLU Set commodity information
3.1.1.PLU No. PLU number of commodity
3.1.2.Barcode Commodity code (Part of barcode)
3.1.3.Name Name of commodity
3.1.4.Price Price of commodity
3.1.5.Sales type 1: Weight; 2: Package; 3: Fixed weight
3.1.6.Fixed weight(g) Weight of commodity selling by fixed weight
3.1.7.Tare weight (g) Tare weight of commodity, e.g.: weight of package
Whether print date information on label and the type of date
3.1.8.Date type
for printing
3.1.9.DEF.EXP
Shelf life of commodity (days)
date(day)
3.1.10.Price
Whether can change price in sales process
changeable?
3.1.11.Discount mode Discount mode of commodity
3.1.12.Special price Special price of commodity

21 / 22
3.1.13.Percent (%) Discount percent of commodity
3.1.14.Coupon Coupon of commodity
3.1.15.Message(1~255) Index of Message for commodity
3.2.DEL PLU Delete a PLU according to PLU code (Barcode)
3.3.DEL ALL PLU Delete all PLUs

4.Reports
View the first label printing time after the last time delete
4.1.Date & time
report data.
View the first label printing time after the last time delete
4.2.Daily total amount
report data.
View the first label printing time after the last time delete
4.3.Daily label count
report data.
Delete all report data and can’t regain, please do it be
4.4.Clear-out report?
careful!

5.Factory Setting
Restore the scale settings for all parameters to the initial
5.1.Reset system state of the factory, but it does not delete the PLU
setting information, reports and other user data.
Confirm password: 12345678
Restore the scale settings for all parameters to the initial
state of the factory, and it will delete the PLU information,
5.2.Restore factory
reports and all others user data and can’t regain, please
setting
do it be careful!
Confirm password: 12345678

6.System Test
6.1.Printer test Execute printing function and print a test label

7.Version Display the software version information

22 / 22