EMC

PARTNER

COMPLETE TEST SOLUTIONS FOR

Conducted Immunity Testing

This document has been
optimized for electronic media

Smart navigation through technical

specifications. Click the green links.

Accredited Calibration
Quality at EMC PARTNER is based on an ISO 9001 management sys-
tem. This is the foundation for an ISO/IEC 17025 accreditation
verified by the Swiss Calibration Service (SCS). SCS No. 146 is the
accredita-tion number of EMC PARTNER AG. Locally accredited but
recognized worldwide through affiliation with the ILAC organisation
THE CONDUCTED IMMUNITY TEST SYSTEM

MANY CHOICES ONE SOLUTION

Basic and product standards require a mix of conducted immunity EMC tests.
Required test types can include:

›› Electric Fast Transient (EFT)

›› Surge (CWG, Ring wave, Telecom)
›› Damped Oscillatory Wave (DOW)
›› AC / DC Dips & Interrupts
›› AC / Impulse / DOW magnetic field
›› Common Mode
›› Differential Mode

The ideal is a flexible test equipment that combines any or all of these
requirements into one single solution.

3
 CUSTOM IS STANDARD
IMU and DOW generators are designed with the user in
mind. A modular architecture allows configuration of test
circuits to meet any requirement. A solution that can
easily be extended with more modules when additional
tests are needed. IMU-MGE
DOW-CG1

IMU-MGS

DOW series IMU series

DOW Mainframe Unit IMU Mainframe Unit

Available Modules Available Modules

SLOW 100kHz & 1MHz / 4.4kV Surge / CWG 4kV / 5 kV / 6kV / 8kV
FAST 3MHz, 10MHz & 30MHz / 4 kV Ring Wave 6kV / 8kV
CDN 690Vac & 500Vdc / 32A Telecom 6kV / 8kV
Insulation 1.2/50us 500Ω / 0.5J 8kV EFT 4kV / 5kV / 6kV / 7kV
Common Mode 35V / 330V
AC & DC Interrupts 16A / 32A / 75A
AC DIPS & Variation 16A
Differential Mode voltage / current
ESD 16kV

WHY
MODULARITY ?
You get a cost-effective
solution that fits your test
requirements. Also, you
can extend your system
for other tests after initial
purchase and on-site
whenever you have new
test requirements.

4
AVAILABLE TESTS
IMU Series

ESD Electrostatic Discharges up to 16kV

According to IEC/EN 61000-4-2

Electric Fast Transient / Burst (EFT) up to 7kV

According to IEC/EN 61000-4-4

Combination Wave /Surge (CWG) up to 8kV

According to IEC/EN 61000-4-5, ANSI C62.41

Telecom Impulse (10/700) up to 8kV

According to IEC/EN 61000-4-5, ITU-T K.44

Ring Wave 100kHz (Ring) up to 8kV

According to IEC/EN 61000-4-12, ANSI C62.41

Common Mode (CM) up to 35V continuous / 330V short

According to IEC/EN 61000-4-16

Differential Mode (DM) 4.4A / 25V

According to IEC/EN 61000-4-19

AC & DC Dips, Variations and Interruptions

According to IEC/EN 61000-4-11 /-29 /-34

Magnetic Field / Pulse

According to IEC/EN 61000-4-8 / -9

DOW Series

SLOW SLOW Damped Oscillatory Waves 100kHz & 1 MHz

According to IEC/EN 61000-4-18, -10, ANSI C37.90

FAST FAST Damped Oscillatory Waves 3MHz, 10MHz, 30MHz

According to IEC/EN 61000-4-18

Insulation 0.5J / 500 Ω up to 8kV

According to IEC/EN 60255-27

Magnetic Field / DOW

According to IEC/EN 61000-4-10

5
 Enhanced safety is standard

Red/Yellow Emergency Stop button on front panel of

generator can be complemented with remote option.
Add warning lamps and a test cabinet for enhanced
test place safety.

UNIQUE FEATURES
Leading technology - New designs take advantage of latest innovations.

Test routines Test reporting

Link together many different test types Generate test reports via USB interface
into one sequence. or built in webserver as csv, html and
pdf formats.

Online updates free of charge Extend testing capability

Software download from internet Hardware upgrades maintain the system

directly into the instrument. value.

6
EPOS - BEYOND BETTER
EMC PARTNER Operating System (EPOS) is an independant software with free-of-charge up-
dates for lifetime. EPOS is based on a full colour graphic interface and easy to follow on-
screen graphics. Pop-up help gives information when needed, directly during the setting
process. EPOS is full of features found only in top of the range instrumentation.

Test setup libraries Simple touch screen navigation

Pre-programmed tests for all basic and Save time with the latest in intuitive
generic standards included. menu structures.

Power management We speak your language

Active monitor and control of EUT power. Select between English, German,
EUT current limit to prevent damage. French, Italian, Spanish, Russian,
Chinese (traditional and simplified).

7
 TEMA3000 SOFTWARE SUITE
The best solution for professional EMC Test Labs enables comfortable test setups, easy
parameter changes and customizable test reports and DSO integration.

Want to know more? Further information and demo version available on the website

Customizable test reports Manage tests and sequences

›› Customize & edit your protocols ›› Predefined test setups

›› Export to multiple file formats ›› Save and load own tests and
›› Integrate DSO measurements sequences

Productive workflow Smart connectivity

›› Minimum learning time ›› Transfer tests / reports to PC

›› Integrated assistant function ›› Integrated web server
›› Remote control from computer
8
Technical Specifications

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 9

 GENERATORS
›› IMU-MGS
›› IMU-MGE
›› DOW-CG1

CDNS
IEC 61000-4 -2 -4 -5 -8 -9 -11 -12 -16 -18 -19 -29 -34
Supply Lines
CDNs for burst, Surge and Ring wave
4 kV / 6 kV line
CDN-M-6-32   

CDN-A-6-32   

CDN-A-6-63   

CDN-A-6-125   

CDN-A-6-200   

7.6 kV line
CDN-M-8-32   

CDN-A-8-32   

CDN-A-8-63   

CDN-A-8-125   

CDN-A-8-200   

7 kV burst
CDN-F-125 

CN/DNs for -16

CN16, CN16-300 

CN16DC 

DN16-1P6 

DN16-1P16 
I/O Lines
CDN-KIT1000 ED3 

CDN-DATA-4L  

CDN-DATA-8L  

CDN-UTP ED3  

CDN-UTP8 ED3  

CN16T, CN16T4 

CN-R40C05 other

CN-R40C05 8 other

CDN-DOW-DATA-LF 

CDN-DOW-DATA-HF18 

10 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

ACCESSORIES
IEC 61000-4 -2 -4 -5 -8 -9 -10 -11 -12 -16 -18 -19 -29 -34
EXT-IMU-E 

ESD-TARGET2 

ESD-VERI-V 

ESD-STAND Ed2 

EARTH CABLE 

ESD-VCP50 

CN-EFT1000  

VERI50 EFT  

VERI1K EFT  

VERI-CP-EFT  

ADAPTER EFT-CDN 

CN-BALUN AC ANSI

EFT-INSULATION 

V-PROBE-SI  

I-PROBE-P101 

MF1000-1   

MF1STAND   

MF1000-2   

MF1000-3 

MF3STAND 

VAR-EXT1000  

SRC16-1P 

VERI-DIPS   

DIPS100E   

PFS32  

SRC32-18UH  

SRC32-AMD1-18 UH  

PFS75  

PFS75-690V  

SRC75-18UH  

SRC75-690V-18UH  

PS3  

RS485-RS232 ADAPT.  

EXT-IMU C-SHORT 

VERI01 OSI 

IMU SLAVE SMART V1 

IMU SLAVE SMART I1 

IMU SLAVE SMART I1V1 

VERI10/50 

EXT-IMU D-29D 

EXT-IMU D-29I 

EMERGENCY STOP             
WARNING LAMP              
TC-ST  

TEMA3000 SOFTWARE             

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 11

 GENERATORS

IMU-MGS

IMU-MGS Mainframe
EUT power input 1 (CDN) max. AC/DC 300V, 16A (fused 16A) with P module
EUT power input 2 (CDN) max. AC/DC 300V, 16A (not fused) with P module
Internal CDN freq. range DC, 50 Hz, 60 Hz
Power freq. synchr. 50/60 Hz
Coupling Burst L, N, PE, L+N, L+PE, N+PE, L+N+PE, direct out
Coupling Surge 2 Ω: L-N, direct out, 12 Ω: L-PE, N-PE

IMU-MGS Control Features

Operating system EPOS propietary firmware

Languages 8 menu languages, selectable
User interface 7“ capacitive touch display
Connectivity gigabit ethernet, USB, RS485
Environment meas. built-in temperature and humidity sensor
EUT power monitor supply voltage, current and freq. on screen
EUT supply
monitoring BNC output connector max. 15 V
voltage waveform
EUT supply
monitoring BNC output connector max. 15 V
current waveform
peak voltage and current on screen, waveform
Surge monitoring
available at BNC outputs
Surge voltage waveform monitoring BNC output connector max. 15 V
Surge current waveform monitoring BNC output connector max. 15 V
Trigger out BNC connector, max. 6 V
Trigger in auto, manual or via programmable BNC
Programmable connectors 2 BNC connectors (inputs/outputs) as follows
Programmable Trigger Input, Start Test, Stop Test, EUT Fail, EUT
input functions Mark, Emergency Stop
Programmable
low range: 0 – 1.5 V, high range: 2.3 – 24 V
input max. voltage
Programmable
Running State, Safety Circuit State
output functions
Programmable
max. 24 V, max. 300 mA
output max. U, I
Synchronization source EUT power, direct out, external
Synchronization angle 0 – 359° ± 5°, 1° step
Input EUT power selection PWR1 and PWR2 selectable on the screen

12 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

Power ON/OFF process sophisticated functions allow to switch EUT
power ON/OFF at selectable voltage angle
(0 – 359°, 1° step)
Impulse polarity positive, negative, alternating
Automatic ramps test level, sync. angle, coupling path
EUT overcurrent protection automatic programmable fuse up to 16 A
PS3 control DC, 16.7 Hz, 50 Hz, 60 Hz supply power
Safety features (standard) Emergency stop button on front panel
red/yellow as per IEC 60947-5-5, IEC 60204-1,
ISO 13850, Safety circuit
Safety accessories WARNING LAMP (24 V, max. 2.4 W),
(optional) TC-ST test cabinet
Remote EMERGENCY STOP button

IMU-MGS module: EXT-IMU P

Application enhances CDN DC capability from 90 V to 300 V
required when the D module is not included
EUT power 0 V - 300 V max. 16 A
EUT frequency DC - 60 Hz

IMU-MGS module: EXT-IMU-E, ESD extension 16 kV

See section Accessories for IMU Series: IEC 61000-4-2

IMU-MGS module: EXT-IMU4000 F4, EFT / Burst extension 4.4 kV

Standard IEC 61000-4-4 latest edition
Output impedance 50 Ω
Voltage OC 0.2 kV – 4.4 kV
Voltage into 50 Ω 0.1 kV – 2.2 kV ± 10 %
Waveform into 50 Ω 5 ± 1.5 ns / 50 ± 15 ns
Voltage into 1 kΩ 0.191 kV - 4.18 kV ± 20%
Waveform into 1 kΩ 5 ± 1.5 ns / 50 ns (-15/+100 ns)
Spike frequency 1 kHz - 1 MHz
Maximum spikes / second 8000 @ 1 kV
Burst duration 0.01 ms - 30 ms, continuous up to 8 kHz
Burst repetition 1 - 1000 ms
Polarity positive, negative, alternating
Synchronization 0 – 359°, step 1°
Ramps voltage, spike frequency, burst duration
Optional accessories CDNs, Accessories

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 13

 IMU-MGS module: EXT-IMU4000 F5, EFT / Burst extension 5.1 kV
Standard IEC 61000-4-4 latest edition
Output impedance 50 Ω
Voltage OC 0.2 kV – 5.1 kV
Voltage into 50 Ω 0.1 kV – 2.55 kV ± 10 %
Waveform into 50 Ω 5 ± 1.5 ns / 50 ± 15 ns
Voltage into 1 kΩ 0.191 kV – 4.85 kV ± 20 %
Waveform into 1 kΩ 5 ± 1.5 ns / 50 ns (-15/+100 ns)
Spike frequency 1 kHz - 1 MHz
Maximum spikes / second 8000 @ 1 kV
Burst duration 0.01 ms - 30 ms, continuous up to 8 kHz
Burst repetition 1 - 1000 ms
Polarity positive, negative, alternating
Synchronization 0 – 359°, step 1°
Ramps voltage, spike frequency, burst duration
Optional accessories CDNs, Accessories

IMU-MGS module: EXT-IMU4000 S4, CWG / Surge extension 4.1 kV

Standard IEC 61000-4-5 latest edition
Output impedance 2Ω
Voltage OC 0.25 kV - 4.1 kV ± 10 %
Voltage waveform 1.2 µs ± 30 % / 50 µs ± 20 %
Current SC 0.125 kA - 2.05 kA ± 10 %
Current waveform 8 µs ± 20 % / 20 µs ± 20 %
Pulse repetition up to 1 / s @ 0.8 kV, 1 / 5 s @ 4.1 kV
Polarity positive, negative, alternating
Synchronization 0 – 359°, step 1°
Ramps voltage, synchronisation angle
Magnetic pulse test IEC 61000-4-9, see MF1000-x coils
Optional accessories CDNs, CDNs for I/O Lines, Accessories

IMU-MGS module: EXT-IMU4000 S5, CWG / Surge extension 5.1 kV

Standard IEC 61000-4-5 latest edition
Output impedance 2Ω
Voltage OC 0.25 kV - 5.1 kV ± 10 %
Voltage waveform 1.2 µs ± 30 % / 50 µs ± 20 %
Current SC 0.125 kA - 2.55 kA ± 10 %
Current waveform 8 µs ± 20 % / 20 µs ± 20 %
Pulse repetition up to 1 / s @ 0.8 kV, 1 / 5.5 s @ 5.1 kV
Polarity positive, negative, alternating
Synchronization 0 – 359°, step 1°
Ramps voltage, synchronisation angle
Magnetic pulse test IEC 61000-4-9, see MF1000-x coils
Optional accessories CDNs, CDNs for I/O Lines, Accessories

14 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

IMU-MGS module: EXT-IMU D, AC/DC dips, interruptions extension
Standard IEC 61000-4-11 latest edition
EUT AC power 0 V – 300 V, max. 16 A
EUT frequency with variac 48 Hz – 60 Hz
Switch time into 100 Ω 1 µs – 5 µs
Interruption time 50 µs – 60 s
Inrush current > 500 A peak
Dips internal variac voltage 0 – 110 %, max. 5 A
Dips extern. variac voltage 0 – 110 %, max. 16 A
EUT turn ON/OFF phase selectable, 0° – 359°
Variation mode adjust, abrupt
Variation internal variac voltage 0 – 100 %, max. 5A
Variation external variac voltage 0 – 100 %, max 16A
Interruption < one period input as phase angle
Interruption > one period input in ms
Ramps voltage, synchronisation angle, time
Requires EXT-IMU V, SRC16-1P or VAR-EXT1000 for AC dips
Optional accessories Accessories

Standard IEC 61000-4-29 latest edition

EUT DC power 24 – 300 V, 0 – 16 A @ 300V
Switch time into 100 Ω 1 µs – 50 µs
Interruption time 0.1 ms – 60000 ms
Requires 1 x PS3 for DC interrupt., 2 x PS3 for DC dips

IMU-MGS module: EXT-IMU V, dips and variations extension

Standard IEC 61000-4-11 latest edition
Construction internal variac
Power input AC 20 – 250 V, 5 A, 50/60 Hz
Power output dips max. 275 V (110 %), max. 5 A continuous
Power output variations max. 250 V (100 %), max. 5 A continuous
Current capability dips 10 A for 5 sec., 16 A for 300 ms
Variation mode adjust, abrupt
Voltage slew rate < 1.2 s from 0 to 100 %
Switching time abrupt 1 – 5 µs
Ramp transition time 25 – 999 periods @ 50/60 Hz
Magnetic field test IEC 61000-4-8, see MF1000-x coils

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 15

 T

IMU-MGS module: EXT-IMU C, Common mode extension

Standard IEC 61000-4-16 latest edition
Test voltage continuous 0.1 – 35 Vrms
Power harmonic test 15 Hz – 150 kHz up to 35 V
Sweep time adjustable, decade time: 10 s – 1000 s
Test voltage short duration 0.1 – 330 Vrms: requires PS3, EXT-IMU C-SHORT
Power frequency test DC, 16.7 Hz, 50 Hz, 60 Hz
Source impedance 50 Ω ± 10 %
Sync. turn on/off for AC 0° ± 5°
DC switching time 1 - 5 µs
Residual ripple DC < 5%
THD 15 Hz – 150 kHz < 1%
THD power frequency < 10%
Optional accessories CNs for I/O Lines, Accessories

IMU-MGS module: IMU SLAVE SMART external module

See section Accessories for IMU Series: IEC 61000-4-19

POWER, WEIGHT, DIMENSIONS, CLIMATIC CONDITIONS

IMU-MGS mainframe
Operating voltage 100 – 240 V (50/60 Hz) ± 10 %
Power consumption ON < 150 VA, standby < 15 VA
Weight 16 kg (weight of modules not included)
Wxdxh 520 x 433 x 180 mm
Version 19“ unit, 4 UH

Temperature range 10 – 35 °C
Humidity < 80 % non-condensing
Air pressure 86 – 106 kPa

Included articles
Power cord with country plug
Supply connection 3 cables x 2 m, banana plugs
User manual digital format (PDF)
Calibration certificate factory calibration
Ethernet cable 1 piece
USB stick 1 piece
CDN burst cal. adapter 1 piece

16 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

IMU-MGE

IMU-MGE Mainframe
EUT power input 1 (CDN) max. AC/DC 300V, 16A (fused 16A) with P module
EUT power input 2 (CDN) max. AC/DC 300V, 16A (not fused) with P module
Internal CDN freq. range DC, 50 Hz, 60 Hz
Power freq. synchr. 50/60 Hz
Coupling Burst L, N, PE, L+N, L+PE, N+PE, L+N+PE, direct out
Coupling Surge 2 Ω: L-N, direct out, 12 Ω: L-PE, N-PE, direct out
Coupling Ring wave 12 Ω and 30 Ω: L-N, N-PE, L-PE, direct out

IMU-MGE Control Features

Operating system EPOS propietary firmware

Languages 8 menu languages, selectable
User interface 7“ capacitive touch display
Connectivity gigabit ethernet, USB, RS485
Environment meas. built-in temperature and humidity sensor
EUT power monitor supply voltage, current and freq. on screen
EUT supply
monitoring BNC output connector max. 15 V
voltage waveform
EUT supply
monitoring BNC output connector max. 15 V
current waveform
peak voltage and current on screen, waveform
Surge monitoring
available at BNC outputs
Surge voltage waveform monitoring BNC output connector max. 15 V
Surge current waveform monitoring BNC output connector max. 15 V
Trigger out BNC connector, max. 6 V
Trigger in auto, manual or via programmable BNC
Programmable connectors 2 BNC connectors (inputs/outputs) as follows
Programmable Trigger Input, Start Test, Stop Test, EUT Fail, EUT
input functions Mark, Emergency Stop
Programmable
low range: 0 – 1.5 V, high range: 2.3 – 24 V
input max. voltage
Programmable
Running State, Safety Circuit State
output functions
Programmable
max. 24 V, max. 300 mA
output max. U, I
Synchronization source EUT power, direct out, external
Synchronization angle 0 – 359° ± 5°, 1° step
Input EUT power selection PWR1 and PWR2 selectable on the screen
Power ON/OFF process sophisticated functions allow to switch EUT
power ON/OFF at selectable voltage angle
(0 – 359°, 1° step)

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 17

 Impulse polarity positive, negative, alternating
Automatic ramps test level, sync. angle, coupling path
EUT overcurrent protection automatic programmable fuse up to 16 A
PS3 control DC, 16.7 Hz, 50 Hz, 60 Hz supply power
Safety features Emergency stop button on front panel
(standard) red/yellow as per IEC 60947-5-5, IEC 60204-1,
ISO 13850, Safety circuit
Safety accessories WARNING LAMP (24 V, max. 2.4 W),
(optional) TC-ST test cabinet
Remote EMERGENCY STOP button

IMU-MGE module: EXT-IMU P

Application enhances CDN DC capability from 90 V to 300 V
required when the D module is not included
EUT power 0 V - 300 V max. 16 A
EUT frequency DC - 60 Hz

IMU-MGE module: EXT-IMU E, ESD extension 16 kV

See section Accessories for IMU Series: IEC 61000-4-2

IMU-MGE module: EXT-IMU3000 F5, EFT / Burst extension 5.3 kV

Standard IEC 61000-4-4 latest edition
Output impedance 50 Ω
Voltage OC 0.2 kV – 5.3 kV ± 10 %
Voltage into 50 Ω 0.1 kV – 2.65 kV ± 10 %
Waveform into 50 Ω 5 ± 1.5 ns / 50 ± 15 ns
Voltage into 1 kΩ 0.191 kV – 5.04 kV ± 20 %
Waveform into 1 kΩ 5 ± 1.5 ns / 50 ns (-15/+100 ns)
Spike frequency 1 kHz - 1 MHz
Maximum spikes / second 8000 @ 1 kV
Burst duration 0.01 ms - 30 ms, continuous up to 8 kHz
Burst repetition 1 - 1000 ms
Polarity positive, negative, alternating
Synchronization 0 – 359°, step 1°
Ramps voltage, spike frequency, burst duration
Optional accessories CDNs, Accessories

IMU-MGE module: EXT-IMU3000 F6, EFT / Burst extension 6.3 kV

Standard IEC 61000-4-4 latest edition
Output impedance 50 Ω
Voltage OC 0.2 kV – 6.3 kV ± 10 %
Voltage into 50 Ω 0.1 kV – 3.15 kV ± 10 %
Waveform into 50 Ω 5 ± 1.5 ns / 50 ± 15 ns

18 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

Voltage into 1 kΩ 0.191 kV – 5.99 kV ± 20 %
Waveform into 1 kΩ 5 ± 1.5 ns / 50 ns (-15/+100 ns)
Spike frequency 1 kHz - 1 MHz
Maximum spikes / second 8000 @ 1 kV
Burst duration 0.01 ms - 30 ms, continuous up to 8 kHz
Burst repetition 1 - 1000 ms
Polarity positive, negative, alternating
Synchronization 0 – 359°, step 1°
Ramps voltage, spike frequency, burst duration
Optional accessories CDNs, Accessories

IMU-MGE module: EXT-IMU3000 F7, EFT / Burst extension 7.1 kV

Standard IEC 61000-4-4 latest edition
Output impedance 50 Ω
Voltage OC 0.2 kV – 7.1 kV ± 10 %
Voltage into 50 Ω 0.1 kV – 3.5 kV ± 10 %
Waveform into 50 Ω 5 ± 1.5 ns / 50 ± 15 ns
Voltage into 1 kΩ 0.191 kV – 6.75 kV ± 20 %
Waveform into 1 kΩ 5 ± 1.5 ns / 50 ns (-15/+100 ns)
Spike frequency 1 kHz - 1 MHz
Maximum spikes / second 8000 @ 1 kV
Burst duration 0.01 ms - 30 ms, continuous up to 8 kHz
Burst repetition 1 - 1000 ms
Polarity positive, negative, alternating
Synchronization 0 – 359°, step 1°
Ramps voltage, spike frequency, burst duration
Optional accessories CDNs, Accessories

IMU-MGE module: EXT-IMU3000 S6, CWG / Surge extension 6.6 kV

Standard IEC 61000-4-5 latest edition
Output impedance 2Ω
Voltage OC 0.25 kV - 6.6 kV ± 10 %
Voltage waveform 1.2 µs ± 30 % / 50 µs ± 20 %
Current SC 0.125 kA – 3.3 kA ± 10 %
Current waveform 8 µs ± 20 % / 20 µs ± 20 %
Pulse repetition up to 1 / s @ 0.6 kV, 1 / 10 s @ 6.6 kV
Polarity positive, negative, alternating
Synchronization 0 – 359°, step 1°
Ramps voltage, synchronisation angle
Magnetic pulse test IEC 61000-4-9, see MF1000-x coils
Optional accessories CDNs, CDNs for I/O Lines, Accessories

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 19

 IMU-MGE module: EXT-IMU3000 S8, CWG / Surge extension 8 kV
Standard IEC 61000-4-5 latest edition
Output impedance 2Ω
Voltage OC 0.25 kV – 8 kV ± 10 %
Voltage waveform 1.2 µs ± 30 % / 50 µs ± 20 %
Current SC 0.125 kA – 4 kA ± 10 %
Current waveform 8 µs ± 20 % / 20 µs ± 20 %
Pulse repetition up to 1 / s @ 0.6 kV, 1 / 12 s @ 8 kV
Polarity positive, negative, alternating
Synchronization 0 – 359°, step 1°
Ramps voltage, synchronisation angle
Magnetic pulse test IEC 61000-4-9, see MF1000-x coils
Optional accessories CDNs, CDNs for I/O Lines, Accessories

IMU-MGE module: EXT-IMU3000 T6, Telecom Surge extension 6.6 kV

Standard IEC 61000-4-5 latest edition
Output impedance 15 Ω, 40 Ω
Voltage OC 0.25 kV - 6.6 kV ± 10 %
Voltage waveform 10 µs ± 30 % / 700 µs ± 20 %
Current SC into 40 Ω 6.25 A – 165 A ± 10 %
Current waveform 5 µs ± 20 % / 320 µs ± 20 %
Pulse repetition up to 1 / s @ 0.3 kV, 1 / 20 s @ 6.6 kV
Polarity positive, negative, alternating
Ramps voltage
Optional accessories CDNs for I/O Lines, Accessories

IMU-MGE module: EXT-IMU3000 T8, Telecom Surge extension 8 kV

Standard IEC 61000-4-5 latest edition
Output impedance 15 Ω, 40 Ω
Voltage OC 0.25 kV - 8 kV ± 10 %
Voltage waveform 10 µs ± 30 % / 700 µs ± 20 %
Current SC into 40 Ω 6.25 A – 200 A ± 10 %
Current waveform 5 µs ± 20 % / 320 µs ± 20 %
Pulse repetition up to 1 / s @ 0.3 kV, 1 / 24 s @ 8 kV
Polarity positive, negative, alternating
Ramps voltage
Optional accessories CDNs for I/O Lines, Accessories

IMU-MGE module: EXT-IMU D, AC/DC Dips, Interruptions extension

Standard IEC 61000-4-11 latest edition
EUT AC power 0 V – 300V @ 50 / 60 Hz, max. 16 A
EUT frequency with variac 48 Hz – 60 Hz
Switch time into 100 Ω 1 µs – 5 µs
Interruption time 50 µs – 30 s
Inrush current > 500 A peak

20 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

Dips internal variac voltage 0 – 110 %, max. 5 A
Dips extern. variac voltage 0 – 110 %, max. 16 A
EUT turn ON/OFF phase selectable, 0° – 359°
Variation mode adjust, abrupt
Variation internal variac voltage 0 – 100 %, max. 5A
Variation external variac voltage 0 – 100 %, max 16A
Interruption < one period input as phase angle
Interruption > one period input in ms
Ramps voltage, synchronisation angle, time
Requires EXT-IMU V, SRC16-1P or VAR-EXT1000 for AC dips
Optional accessories Accessories

Standard IEC 61000-4-29 latest edition

EUT DC power 24 – 300 V, 0 – 16 A @ 300V
Switch time into 100 Ω 1 µs – 50 µs
Interruption time 0.1 ms – 60000 ms
Requires 1 x PS3 for DC interrupt., 2 x PS3 for DC dips

IMU-MGE module: EXT-IMU V, Variations extension

Standard IEC 61000-4-11 latest edition
Construction internal variac
Power input AC 20 – 250 V, 5 A, 50/60 Hz
Power output dips max. 275 V (110 %), max. 5 A continuous
Power output variations max. 250 V (100 %), max. 5 A continuous
Current capability dips 10 A for 5 sec., 16 A for 300 ms
Variation mode adjust, abrupt
Voltage slew rate < 1.2 s from 0 to 100 %
Switching time abrupt 1 – 5 µs
Ramp transition time 25 – 999 periods
Magnetic field test IEC 61000-4-8, see MF1000-x coils

IMU-MGE module: EXT-IMU3000 R6, 100 kHz Ring wave extension 6.6 kV
Standard IEC 61000-4-12 latest edition
Output impedance 12 Ω, 30 Ω
Voltage OC 0.25 kV - 6.6 kV ± 10 %, decay as in IEC, ANSI
Voltage rise time/ osc. freq. 0.5 µs ± 30 % / 100 kHz ± 10 %
Current SC into 12 Ω 20.833 A – 550 A ± 10 %
Current SC into 30 Ω 8.3 A – 220 A ± 10 %
Current rise time 0.2 - 1 µs
Pulse repetition up to 1 / s @ 1 kV, 1 / s @ 6.6 kV
Polarity positive, negative, alternating
Synchronization 0 – 359°, step 1°
Ramps voltage, synchronisation angle
Optional accessories CDNs, CDNs for I/O Lines, Accessories

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 21

 IMU-MGE module: EXT-IMU3000 R8, 100 kHz Ring wave extension 8 kV
Standard IEC 61000-4-12 latest edition
Output impedance 12 Ω , 30 Ω
Voltage OC 0.25 kV - 8 kV ± 10 %, decay as in IEC, ANSI
Voltage rise time/ osc. freq. 0.5 µs ± 30 % / 100 kHz ± 10 %
Current SC into 12 Ω 20.83 A – 667 A ± 10 %
Current SC into 30 Ω 8.3 A – 267 A ± 10 %
Current rise time 0.2 - 1 µs
Pulse repetition up to 1 / s @ 1 kV, 1 / s @ 8 kV
Polarity positive, negative, alternating
Synchronization 0 – 359°, step 1°
Ramps voltage, synchronisation angle
Optional accessories CDNs, CDNs for I/O Lines, Accessories

IMU-MGE module: EXT-IMU C, Common mode extension

Standard IEC 61000-4-16 latest edition
Test voltage continuous 0.1 – 35 Vrms
Power harmonic test 15 Hz – 150 kHz
Sweep time adjustable, decade time: 10 s – 1000 s
Test voltage short duration 0.1 – 330 Vrms: PS3, EXT-IMU C-SHORT
Power frequency test DC, 16.7 Hz, 50 Hz, 60 Hz
Source impedance 50 Ω ± 10 %
Sync. turn on/off for AC 0° ± 5°
DC switching time 1 - 5 µs
Residual ripple DC < 5%
THD 15 Hz – 150 kHz < 1%
THD power frequency < 10%
Optional accessories CNs, CNs for I/O Lines, Accessories

IMU-MGE module: IMU SLAVE SMART external module

See section Accessories for IMU Series: IEC 61000-4-19

22 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

POWER, WEIGHT, DIMENSIONS, CLIMATIC CONDITIONS

IMU-MGE mainframe
Operating voltage 100 – 240 V (50/60 Hz) ± 10 %
Power consumption ON < 150 VA, standby < 15 VA

Weight 30 kg (weight of modules not included)

Wxdxh 600 x 450 x 370 mm
Version 19“ unit, 8 UH
Temperature range 10 – 35 °C
Humidity < 80 % non-condensing
Air pressure 86 – 106 kPa

Included articles
Power cord with country plug
Supply connection 3 cables x 2 m, banana plugs
User manual digital format (PDF)
Calibration certificate factory calibration
Ethernet cable 1 piece
USB stick 1 piece
CDN burst cal. adapter 1 piece

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 23

 DOW-CG1

DOW-CG1 Mainframe
Built-in CDN three phase CDN integrated
EUT voltage AC max. 3 x 690 V L-L (400 V L-N), 50 / 60 Hz
EUT current AC max. 3 x 32 A
EUT protection AC over-current automatic prot., Type C charact.
EUT power DC max. 500 V, 32 A L-L or L-PE
EUT power switch ON / OFF switch on the touch screen
Internal CDN freq. range DC, 50 Hz, 60 Hz
Power freq. synchr. 50 / 60 Hz for both slow and fast
L1-L2, L1-L3, L2-L3, L1-N, L2-N, L3-N,
Coupling slow DOW L1-PE, L2-PE, L3-PE, N-PE, L1+N to PE, L1+L2+L3+N
to PE
L1-PE, L2-PE, L3-PE, N-PE, L1+N to PE, L1+L2+L3+N
Coupling fast DOW
to PE

DOW-CG1 Control Features

Operating system EPOS propietary firmware

Languages 8 menu languages, selectable
User interface 7“ capacitive touch display
Connectivity gigabit ethernet, USB, RS485
EUT power monitor supply voltage, current and freq. on screen
0.5 J surge monitoring peak voltage on screen, waveform available at
BNC output
Surge voltage waveform monitoring BNC output connector max. 15 V
Trigger out BNC connector, max. 6 V
Trigger in auto, manual or via programmable BNC
Programmable connectors 5 BNC connectors (inputs/outputs) as follows
Programmable
Trigger Input, Start Test, Stop Test, EUT Fail, EUT
input functions
Mark, Emergency Stop
Programmable
low range: 0 – 1.5 V, high range: 2.3 – 24 V
input max. voltage
Programmable
Running State, Safety Circuit State
output functions
Programmable
max. 24 V, max. 300 mA
output max. U, I
Impulse polarity positive, negative, alternating
Automatic ramps test level, coupling path
EUT overcurrent protection automatic programmable fuse up to 32 A/ph.

24 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

Safety features Emergency stop button on front panel
(standard) red/yellow as per IEC 60947-5-5, IEC 60204-1, ISO
13850, Safety circuit
Safety accessories WARNING LAMP (24 V, max. 2.4 W),
(optional) TC-ST test cabinet
Remote EMERGENCY STOP button

DOW-CG1 module: DOW-CG1 S Slow damped oscillatory wave 5 kV

Standards IEC 61000-4-18, ANSI C37.90, other
IEC 61000-4-12:1995, IEC60255-26, latest editions
Oscillation frequencies 100 kHz, 1 MHz ± 10 %
Voltage OC direct out 0.2 kV – 5 kV ± 10 %
Voltage OC CDN out 0.2 kV – 4.4 kV ± 10 %
Current SC direct out 1 A – 25 A ± 20 %
Current SC CDN out 1 A – 22 A ± 20 %
Output impedance 200 Ω
Rise time OC 75 ns ± 20 %
Decay voltage waveform Pk5 > ½ · Pk1, Pk10 < ½ · Pk1
Pulse repetition @ 100 kHz max. 50 / s
Pulse repetition @ 1 MHz max. 500 / s
Burst duration 1 ms – 20 s @ 100 kHz, @ 1 MHz
Burst repetition 100 ms – 200 s @ 100 kHz, @ 1 MHz
Polarity positive, negative, alternating
Synchronization 0 – 359° ± 10°, 1° step
Ramp test voltage
Optional accessories CDNs for I/O Lines, Accessories

Standard IEC 61000-4-10

Magnetic pulse generator as per IEC 61000-4 18 Slow DOW
Magnetic field 100 kHz 5 – 220 A/m with MF1000-1 ± 20 %
5 – 160 A/m with MF1000-2 ± 20 %
Magnetic field 1 MHz 2.5 – 110 A/m with MF1000-1 ± 20 %
2.5 – 60 A/m with MF1000-2 ± 20 %
Requires MF1000-1 or MF1000-2 depend. on EUT size

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 25

 DOW-CG1 module: DOW-CG1 F Fast damped oscillatory wave 4.4 kV
Standard IEC 61000-4-18 latest edition
Oscillation frequencies 3 MHz, 10 MHz, 30 MHz ± 10 %
Voltage OC direct
0.4 kV – 4.4 kV
and CDN out
Voltage calibrated 0.5 kV – 4 kV ± 10 %
Voltage waveform decay Pk5 > ½ · Pk1, Pk10 < ½ · Pk1
Output impedance 50 Ω
Voltage rise time 5 ns ± 30 %
Pulse repetition max. 6666 / s
Burst duration 1 ms – 20 s
Burst repetition 10 ms – 200 s
Current SC direct & CDN 8 A – 88 A @ all frequencies
Current SC calibrated 10 A – 80 A ± 20 %
Current rise time < 330 ns @ 3 MHz
< 100 ns @ 10 MHz
< 33 ns @ 30 MHz
Current waveform decay Pk5 > ¼ · Pk1, Pk10 < ¼ · Pk1
Polarity positive, negative, alternating
Synchronization 0 – 359° ± 10°, 1° step
Ramp test voltage
Optional accessories CN-EFT1000, VERI01 OSI, VERI1K EFT, VERI50-EFT

DOW-CG1 module: DOW-CG1 I Insulation test 500 Ω / 0.5 J up to 8 kV

Standards IEC 61180-1/2, IEC 62052-11, IEC 60255-27,
IEC 60834-1/2, EN 50470-1
Voltage test levels 0.5 kV, 1 kV, 1.5 kV, 2 kV, 2.5 kV, 3 kV, 4 kV,
5 kV, 6 kV, 8 kV + 0 % / - 10 %
Output impedance 500 Ω ± 10 %
Impulse rise time 1.2 µs ± 30 %
Impulse duration 50 µs ± 20 %
Pulse energy at test levels 0.5 J ± 10 %
Repetition rate 1 s – 655 s
Included articles cables and test clips

26 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

POWER, WEIGHT, DIMENSIONS, CLIMATIC CONDITIONS

DOW-CG1 mainframe
Operating voltage 100 – 240 V (50/60 Hz) ± 10 %
Power consumption ON < 400 VA, standby < 15 VA

Weight 43.3 kg full version

Wxdxh 600 x 450 x 370 mm
Version 19“ unit, 8 UH

Temperature range 10 – 35 °C
Humidity < 80 % non-condensing
Air pressure 86 – 106 kPa

Included articles
Power cord with country plug
Supply connection 5 cables x 2 m, banana plugs
User manual digital format (pdf)
Calibration certificate factory calibration
CDN Calibration adapter 1 piece
Ethernet cable 1 piece
USB stick 1 piece

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 27

 CDNs FOR BURST, SURGE,
RING WAVE ON POWER LINES
max. 4/6 kV max. 7.6 kV 7 kV manual burst CDN
CDN-M-6-32 CDN-M-8-32 CDN-F-125
OPT-M-6-32 1000V DC OPT-M-8-32 1000V DC
OPT-M-6-32 RWG OPT-M-8-32 RWG
PROT32-AC690 PROT32-AC690
PROT32-DC500 PROT32-DC500
Latest technology CDNs
PROT32-DC1000 PROT32-DC1000
DC-DC32 DC-DC32
CN-R40C05
CDN-A-6-32
CN-R40C05 8
CDN-A-8-32
MANY OPTIONS
OPT-A-6-32 1000V DC
OPT-A-6-32 1500V DC
OPT-A-8-32 1000V DC
OPT-A-8-32 1500V DC
ONE CHOICE
OPT-A-6-32 RWG OPT-A-8-32 RWG Solutions for professionals
PROT32-AC690 PROT32-AC690
PROT32-DC500 PROT32-DC500 ›› Unique capabilities
PROT32-DC1000 PROT32-DC1000
PROT32-DC1500 PROT32-DC1500 ›› Excellent decoupling
OPT-A-6-32 ANSI OPT-A-8-32 ANSI ›› Highest EUT voltage supported
DC-DC32 DC-DC32
CN-R40C05 CN-R40C05 8 ›› Truly flexible, subsequently upgradable
CDN-A-6-63 CDN-A-8-63 ›› EUT and supply connectors included
OPT-A-6-63 1000V DC OPT-A-8-63 1000V DC
OPT-A-6-63 1500V DC OPT-A-8-63 1500V DC ›› Fully compliant with a single CDN
OPT-A-6-63 RWG OPT-A-8-63 RWG ›› Ready for railway testing
PROT63-AC690 PROT63-AC690
PROT63-DC500 PROT63-DC500 ›› Ready for EV testing
PROT63-DC1000 PROT63-DC1000 ›› Multicolour coupling path indication
PROT63-DC1500 PROT63-DC1500
OPT-A-6-63 ANSI OPT-A-8-63 ANSI ›› Higher EUT current CDNs on demand
OPT-A-6-63 FULL RANGE OPT-A-8-63 FULL RANGE
DC-DC63 DC-DC63
CDN-A-6-125 CDN-A-8-125
OPT-A-6-125 1000V DC OPT-A-8-125 1000V DC
OPT-A-6-125 1500V DC OPT-A-8-125 1500V DC
OPT-A-6-125 RWG OPT-A-8-125 RWG
PROT125-AC690 PROT125-AC690
PROT125-DC500 PROT125-DC500
PROT125-DC1000 PROT125-DC1000
PROT125-DC1500 PROT125-DC1500
OPT-A-6-125 ANSI OPT-A-8-125 ANSI
OPT-A-6-125 FULL RANGE OPT-A-8-125 FULL RANGE
DC-DC125 DC-DC125
CDN-A-6-200 CDN-A-8-200
OPT-A-6-200 1000V DC OPT-A-8-200 1000V DC
OPT-A-6-200 1500V DC OPT-A-8-200 1500V DC
OPT-A-6-200 RWG OPT-A-8-200 RWG
PROT200-AC690 PROT200-AC690
PROT200-DC500 PROT200-DC500
OPT-A-6-200 ANSI OPT-A-8-200 ANSI
OPT-A-6-200 FULL RANGE OPT-A-8-200 FULL RANGE
DC-DC200 DC-DC200

28 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

4/6 KV CDNS

MANUAL CDNS AND OPTIONS (4/6 KV)

CDN-M-6-32
Standards IEC61000-4-4, IEC61000-4-5, other
Can be upgraded for IEC61000-4-12 (for ANSI see automatic version)
Type 3-ph., manual
EUT voltage AC max. 3 x 690V L-L, 50 / 60 Hz
EUT current AC max. 3 x 32A (covers 0 – 32 A as per standard)
EUT voltage DC max. 500V (can be upgraded, see options)
EUT current DC max. 32A (covers 0 – 32 A as per standard)
Current flow bi-directional (source to EUT and EUT to source)
Test level burst (as per IEC) max. 6 kV
Test level surge (as per IEC) max. 6 kV
Surge waveform as required for current EUT range 0 – 32A
Residual voltage typically < 5 % for burst and < 12 % for surge
Dimensions 19” unit, basic 4 UH
Weight depending on options
Included in delivery 10 connectors (power, EUT), 5 EUT cables
adapter for burst calibration
Generators IMU-MGS, IMU-MGE

Options to be ordered additionally when required

OPT-M-6-32 1000V DC extends DC voltage capability of CDN from
500V DC to 1000V DC
OPT-M-6-32 RWG extends capability of CDN for Ring Wave test
up to 6 kV as per IEC61000-4-12
PROT32-AC690 3-ph. AC 690V/32A automatic overcurrent
circuit breaker (for tests on AC lines)
PROT32-DC500 DC 500V/32A automatic overcurrent
circuit breaker (for tests on DC lines)
PROT32-DC1000 DC 1000V/32A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
all overcurrent protections can be ordered
only one protection to be used at a time

DC-DC32 DC 1500V/32A diode-resistor network as per

IEC61000-4-5 ed. 3, Amendment 1
CN-R40C05 Coupling module for railway apparatus, 6 kV,
according to EN50121 (to be used with a CDN)

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 29

 AUTOMATIC CDNS AND OPTIONS (4/6 KV)

CDN-A-6-32
Standards IEC61000-4-4, IEC61000-4-5, other, latest editions
Can be upgraded for IEC61000-4-12, ANSI C62.45 (see options)
Type 3-ph., automatic
EUT voltage AC max. 3 x 690V L-L, 50 / 60 Hz
EUT current AC max. 3 x 32A (covers 0 – 32 A as per standard)
EUT voltage DC max. 500V (can be upgraded, see options)
EUT current DC max. 32A (covers 0 – 32 A as per standard)
Current flow bi-directional (source to EUT and EUT to source)
Test level burst (as per IEC) max. 6 kV
Test level surge (as per IEC) max. 6 kV
Surge waveform as required for EUT current range 0 – 32A
Residual voltage typically < 5 % for burst and < 12 % for surge
Dimensions 19” unit, basic 4 UH (with options max. 8 UH)
Weight depending on options
Included in delivery EUT connection cables (5 pieces), additionally
10 connectors (power, EUT), 5 EUT cables
adapter for burst calibration
Generators IMU-MGS, IMU-MGE

Options to be ordered additionally when required

OPT-A-6-32 1000V DC extends DC voltage capability of CDN from
500V DC to 1000V DC
OPT-A-6-32 1500V DC extends DC voltage capability of CDN from
500V DC to 1500V DC
OPT-A-6-32 RWG extends capability of CDN for Ring Wave test
up to 6 kV as per IEC61000-4-12
PROT32-AC690 3-ph. AC 690V/32A automatic overcurrent
circuit breaker (for tests on AC lines)
PROT32-DC500 DC 500V/32A automatic overcurrent
circuit breaker (for tests on DC lines)
PROT32-DC1000 DC 1000V/32A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
PROT32-DC1500 DC 1500V/32A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
all overcurrent protections can be ordered
only one protection to be used at a time

OPT-A-6-32 ANSI extends capability of CDN to perform additional

(for Surge & if selected Ring) couplings as per ANSI C62.45
DC-DC32 DC 1500V/32A diode-resistor network as per
IEC61000-4-5 ed. 3, Amendment 1
CN-R40C05 Coupling module for railway apparatus, 6 kV,
according to EN50121 (to be used with a CDN)

30 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

CDN-A-6-63
Standards IEC61000-4-4, IEC61000-4-5, other, latest editions
Can be upgraded for IEC61000-4-12, ANSI C62.45 (see options)
Type 3-ph., automatic
EUT voltage AC max. 3 x 690V L-L, 50 / 60 Hz
EUT current AC max. 3 x 63A
EUT voltage DC max. 500V (can be upgraded, see options)
EUT current DC max. 63A
Current flow bi-directional (source to EUT and EUT to source)
Test level burst (as per IEC) max. 6 kV
Test level surge (as per IEC) max. 6 kV
Surge waveform as required for EUT current range 32 – 63A
see FULL RANGE OPTION below
Residual voltage typically < 5 % for burst and < 12 % for surge
Dimensions 19” unit, 8 UH
Weight depending on options
Included in delivery connectors for EUT and supply (10 pcs.)
adapter for burst calibration
Generators IMU-MGS, IMU-MGE

Options to be ordered additionally when required

OPT-A-6-63 1000V DC extends DC voltage capability of CDN from
500V DC to 1000V DC
OPT-A-6-63 1500V DC extends DC voltage capability of CDN from
500V DC to 1500V DC
OPT-A-6-63 RWG extends capability of CDN for Ring Wave test
up to 6 kV as per IEC61000-4-12
PROT63-AC690 3-ph. AC 690V/63A automatic overcurrent
circuit breaker (for tests on AC lines)
PROT63-DC500 DC 500V/63A automatic overcurrent
circuit breaker (for tests on DC lines)
PROT63-DC1000 DC 1000V/63A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
PROT63-DC1500 DC 1500V/63A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
all overcurrent protections can be ordered
only one protection to be used at a time

OPT-A-6-63 ANSI extends capability of CDN to perform additional

(for Surge & if selected Ring) couplings as per ANSI C62.45
OPT-A-6-63 FULL RANGE ensures that surge waveform can be applied also
when testing EUTs in current range 0-32A/phase
as per IEC61000-4-5 ed. 3
DC-DC63 DC 1500V/63A diode-resistor network as per
IEC61000-4-5 ed. 3, Amendment 1

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 31

 CDN-A-6-125
Standards IEC61000-4-4, IEC61000-4-5, ECE R10, latest editions
Can be upgraded for IEC61000-4-12, ANSI C62.45 (see options)
Type 3-ph., automatic
EUT voltage AC max. 3 x 690V L-L, 50 / 60 Hz
EUT current AC max. 3 x 125A
EUT voltage DC max. 500V (can be upgraded, see options)
EUT current DC max. 125A
Current flow bi-directional (source to EUT and EUT to source)
Test level burst (as per IEC) max. 6 kV
Test level surge (as per IEC) max. 6 kV
Surge waveform as required for EUT current range 63 – 125A
see FULL RANGE OPTION below
Residual voltage typically < 5 % for burst and < 12 % for surge
Dimensions 19” rack with wheels, 18 UH
Weight depending on options
Included in delivery connectors for EUT and supply (10 pcs.)
adapter for burst calibration
Generators IMU-MGS, IMU-MGE

Options to be ordered additionally when required

OPT-A-6-125 1000V DC extends DC voltage capability of CDN from
500V DC to 1000V DC
OPT-A-6-125 1500V DC extends DC voltage capability of CDN from
500V DC to 1500V DC
OPT-A-6-125 RWG extends capability of CDN for Ring Wave test
up to 6 kV as per IEC61000-4-12
PROT125-AC690 3-ph. AC 690V/125A automatic overcurrent
circuit breaker (for tests on AC lines)
PROT125-DC500 DC 500V/125A automatic overcurrent
circuit breaker (for tests on DC lines)
PROT125-DC1000 DC 1000V/125A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
PROT125-DC1500 DC 1500V/125A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
all overcurrent protections can be ordered
only one protection to be used at a time

OPT-A-6-125 ANSI extends capability of CDN to perform additional

(for Surge & if selected Ring) couplings as per ANSI C62.45
OPT-A-6-125 FULL RANGE ensures that surge waveform can be applied also
when testing EUTs in current range 0-63A/phase
as per IEC61000-4-5 ed. 3
DC-DC125 DC 1500V/125A diode-resistor network as per
IEC61000-4-5 ed. 3, Amendment 1

32 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

CDN-A-6-200
Standards IEC61000-4-4, IEC61000-4-5, ECE R10, latest editions
Can be upgraded for IEC61000-4-12, ANSI C62.45 (see options)
Type 3-ph., automatic
EUT voltage AC max. 3 x 690V L-L, 50 / 60 Hz
EUT current AC max. 3 x 200A
EUT voltage DC max. 500V (can be upgraded, see options)
EUT current DC max. 200A
Current flow bi-directional (source to EUT and EUT to source)
Test level burst (as per IEC) max. 6 kV
Test level surge (as per IEC) max. 6 kV
Surge waveform as required for EUT current range 125 – 200A
see FULL RANGE OPTION below
Residual voltage typically < 5 % for burst and < 12 % for surge
Dimensions 19” rack with wheels, 18 UH
Weight depending on options
Included in delivery connectors for EUT and supply (10 pcs.)
adapter for burst calibration
Generators IMU-MGS, IMU-MGE

Options to be ordered additionally when required

OPT-A-6-200 1000V DC extends DC voltage capability of CDN from
500V DC to 1000V DC
OPT-A-6-200 1500V DC extends DC voltage capability of CDN from
500V DC to 1500V DC
OPT-A-6-200 RWG extends capability of CDN for Ring Wave test
up to 6 kV as per IEC61000-4-12
PROT200-AC690 3-ph. AC 690V/200A automatic overcurrent
circuit breaker (for tests on AC lines)
PROT200-DC500 DC 500V/200A automatic overcurrent
circuit breaker (for tests on DC lines)
OPT-A-6-200 ANSI extends capability of CDN to perform additional
(for Surge & if selected Ring) couplings as per ANSI C62.45
OPT-A-6-200 FULL RANGE ensures that surge waveform can be applied also
when testing EUTs in current range 0-125A/phase
as per IEC61000-4-5 ed. 3
DC-DC200 DC 1500V/200A diode-resistor network as per
IEC61000-4-5 ed. 3, Amendment 1

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 33

 7.6 KV CDNS

MANUAL CDNS AND OPTIONS (7.6 KV)

CDN-M-8-32
Standards IEC61000-4-4, IEC61000-4-5, other, latest editions
Can be upgraded for IEC61000-4-12 (for ANSI see automatic version)
Type 3-ph., manual
EUT voltage AC max. 3 x 690V L-L, 50 / 60 Hz
EUT current AC max. 3 x 32A (covers 0 – 32 A as per standard)
EUT voltage DC max. 500V (can be upgraded, see options)
EUT current DC max. 32A (covers 0 – 32 A as per standard)
Current flow bi-directional (source to EUT and EUT to source)
Test level burst (as per IEC) max. 7.1 kV with IMU-MGE
Test level surge (as per IEC) max. 8 kV supported (with IMU-MGEmax. 7.6 kV)
Surge waveform as required for current EUT range 0 – 32A
Residual voltage typically < 5 % for burst and < 12 % for surge
Dimensions 19” unit, basic 4 UH
Weight depending on options
Included in delivery 10 connectors (power, EUT), 5 EUT cables
adapter for burst calibration
Generators IMU-MGE

Options to be ordered additionally when required

OPT-M-8-32 1000V DC extends DC voltage capability of CDN from
500V DC to 1000V DC
OPT-M-8-32 RWG extends capability of CDN for Ring Wave test
up to 7.6 kV (with IMU-MGE) as per IEC61000-4-12
PROT32-AC690 3-ph. AC 690V/32A automatic overcurrent
circuit breaker (for tests on AC lines)
PROT32-DC500 DC 500V/32A automatic overcurrent
circuit breaker (for tests on DC lines)
PROT32-DC1000 DC 1000V/32A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
all overcurrent protections can be ordered
only one protection to be used at a time

DC-DC32 DC 1500V/32A diode-resistor network as per

IEC61000-4-5 ed. 3, Amendment 1
CN-R40C05 8 Coupling module for railway apparatus, 8 kV,
according to EN50121 (to be used with a CDN)

34 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

AUTOMATIC CDNS AND OPTIONS (7.6 KV)

CDN-A-8-32
Standards IEC61000-4-4, IEC61000-4-5, latest editions
Can be upgraded for IEC61000-4-12, ANSI C62.45 (see options)
Type 3-ph., automatic
EUT voltage AC max. 3 x 690V L-L, 50 / 60 Hz
EUT current AC max. 3 x 32A (covers 0 – 32 A as per standard)
EUT voltage DC max. 500V (can be upgraded, see options)
EUT current DC max. 32A (covers 0 – 32 A as per standard)
Current flow bi-directional (source to EUT and EUT to source)
Test level burst max. 7.1 kV with IMU-MGE
Test level surge max. 8 kV supported (with IMU-MGE max. 7.6 kV)
Surge waveform as required for EUT current range 0 – 32A
Residual voltage typically < 5 % for burst and < 12 % for surge
Dimensions 19” unit, basic 4 UH (with options max. 8 UH)
Weight depending on options
Included in delivery 10 connectors (power, EUT), 5 EUT cables
adapter for burst calibration
Generators IMU-MGE

Options to be ordered additionally when required

OPT-A-8-32 1000V DC extends DC voltage capability of CDN from
500V DC to 1000V DC
OPT-A-8-32 1500V DC extends DC voltage capability of CDN from
500V DC to 1500V DC
OPT-A-8-32 RWG extends capability of CDN for Ring Wave test
up to 7.6 kV (with IMU-MGE) as per IEC61000-4-12
PROT32-AC690 3-ph. AC 690V/32A automatic overcurrent
circuit breaker (for tests on AC lines)
PROT32-DC500 DC 500V/32A automatic overcurrent
circuit breaker (for tests on DC lines)
PROT32-DC1000 DC 1000V/32A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
PROT32-DC1500 DC 1500V/32A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
all overcurrent protections can be ordered
only one protection to be used at a time

OPT-A-8-32 ANSI extends capability of CDN to perform additional

(for Surge & if selected Ring) couplings as per ANSI C62.45
DC-DC32 DC 1500V/32A diode-resistor network as per
IEC61000-4-5 ed. 3, Amendment 1
CN-R40C05 8 Coupling module for railway apparatus, 8 kV,
according to EN50121 (to be used with a CDN)

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 35

 CDN-A-8-63
Standards IEC61000-4-4, IEC61000-4-5, latest editions
Can be upgraded for IEC61000-4-12, ANSI C62.45 (see options)
Type 3-ph., automatic
EUT voltage AC max. 3 x 690V L-L, 50 / 60 Hz
EUT current AC max. 3 x 63A
EUT voltage DC max. 500V (can be upgraded, see options)
EUT current DC max. 63A
Current flow bi-directional (source to EUT and EUT to source)
Test level burst (as per IEC) max. 7.1 kV with IMU-MGE
Test level surge (as per IEC) max. 8 kV supported (with IMU-MGE max. 7.6 kV)
Surge waveform as required for EUT current range 32 – 63A
see FULL RANGE OPTION below
Residual voltage typically < 5 % for burst and < 12 % for surge
Dimensions 19” unit, 8 UH
Weight depending on options
Included in delivery connectors for EUT and supply (10 pcs.)
adapter for burst calibration
Generators IMU-MGE

Options to be ordered additionally when required

OPT-A-8-63 1000V DC extends DC voltage capability of CDN from
500V DC to 1000V DC
OPT-A-8-63 1500V DC extends DC voltage capability of CDN from
500V DC to 1500V DC
OPT-A-8-63 RWG extends capability of CDN for Ring Wave test
up to 7.6 kV (with IMU-MGE) as per IEC61000-4-12
PROT63-AC690 3-ph. AC 690V/63A automatic overcurrent
circuit breaker (for tests on AC lines)
PROT63-DC500 DC 500V/63A automatic overcurrent
circuit breaker (for tests on DC lines)
PROT63-DC1000 DC 1000V/63A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
PROT63-DC1500 DC 1500V/63A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
all overcurrent protections can be ordered
only one protection to be used at a time

OPT-A-8-63 ANSI extends capability of CDN to perform additional

(for Surge & if selected Ring) couplings as per ANSI C62.45
OPT-A-8-63 FULL RANGE ensures that surge waveform can be applied also
when testing EUTs in current range 0-32A/phase
as per IEC61000-4-5 ed. 3
DC-DC63 DC 1500V/63A diode-resistor network as per
IEC61000-4-5 ed. 3, Amendment 1

36 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

CDN-A-8-125
Standards IEC61000-4-4, IEC61000-4-5, ECE R10, latest editions
Can be upgraded for IEC61000-4-12, ANSI C62.45 (see options)
Type 3-ph., automatic
EUT voltage AC max. 3 x 690V L-L, 50 / 60 Hz
EUT current AC max. 3 x 125A
EUT voltage DC max. 500V (can be upgraded, see options)
EUT current DC max. 125A
Current flow bi-directional (source to EUT and EUT to source)
Test level burst (as per IEC) max. 7.1 kV with IMU-MGE
Test level surge (as per IEC) max. 8 kV supported (with IMU-MGEmax. 7.6 kV)
Surge waveform as required for EUT current range 63 – 125A
see FULL RANGE OPTION below
Residual voltage typically < 5 % for burst and < 12 % for surge
Dimensions 19” rack with wheels, 18 UH
Weight depending on options
Included in delivery connectors for EUT and supply (10 pcs.)
adapter for burst calibration
Generators IMU-MGE

Options to be ordered additionally when required

OPT-A-8-125 1000V DC extends DC voltage capability of CDN from
500V DC to 1000V DC
OPT-A-8-125 1500V DC extends DC voltage capability of CDN from
500V DC to 1500V DC
OPT-A-8-125 RWG extends capability of CDN for Ring Wave test
up to 7.6 kV (with IMU-MGE) as per IEC61000-4-12
PROT125-AC690 3-ph. AC 690V/125A automatic overcurrent
circuit breaker (for tests on AC lines)
PROT125-DC500 DC 500V/125A automatic overcurrent
circuit breaker (for tests on DC lines)
PROT125-DC1000 DC 1000V/125A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
PROT125-DC1500 DC 1500V/125A automatic overcurrent circuit
(requires voltage option) breaker (for tests on DC lines)
all overcurrent protections can be ordered
only one protection to be used at a time

OPT-A-8-125 ANSI extends capability of CDN to perform additional

(for Surge & if selected Ring) couplings as per ANSI C62.45
OPT-A-8-125 FULL RANGE ensures that surge waveform can be applied also
when testing EUTs in current range 0-63A/phase
as per IEC61000-4-5 ed. 3
DC-DC125 DC 1500V/125A diode-resistor network as per
IEC61000-4-5 ed. 3, Amendment 1

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 37

 CDN-A-8-200
Standards IEC61000-4-4, IEC61000-4-5, ECE R10, latest editions
Can be upgraded for IEC61000-4-12, ANSI C62.45 (see options)
Type 3-ph., automatic
EUT voltage AC max. 3 x 690V L-L, 50 / 60 Hz
EUT current AC max. 3 x 200A
EUT voltage DC max. 500V (can be upgraded, see options)
EUT current DC max. 200A
Current flow bi-directional (source to EUT and EUT to source)
Test level burst (as per IEC) max. 7.1 kV with IMU-MGE
Test level surge (as per IEC) max. 8 kV supported (with IMU-MGEmax. 7.6 kV)
Surge waveform as required for EUT current range 125 – 200A
see FULL RANGE OPTION below
Residual voltage typically < 5 % for burst and < 12 % for surge
Dimensions 19” rack with wheels, 18 UH
Weight depending on options
Included in delivery connectors for EUT and supply (10 pcs.)
adapter for burst calibration
Generators IMU-MGE

Options to be ordered additionally when required

OPT-A-8-200 1000V DC extends DC voltage capability of CDN from
500V DC to 1000V DC
OPT-A-8-200 1500V DC extends DC voltage capability of CDN from
500V DC to 1500V DC
OPT-A-8-200 RWG extends capability of CDN for Ring Wave test
up to 7.6 kV (with IMU-MGE) as per IEC61000-4-12
PROT200-AC690 3-ph. AC 690V/200A automatic overcurrent
circuit breaker (for tests on AC lines)
PROT200-DC500 DC 500V/200A automatic overcurrent
circuit breaker (for tests on DC lines)

OPT-A-8-200 ANSI extends capability of CDN to perform additional

(for Surge & if selected Ring) couplings as per ANSI C62.45
OPT-A-8-200 FULL RANGE ensures that surge waveform can be applied also
when testing EUTs in current range 0-125A/phase
as per IEC61000-4-5 ed. 3
DC-DC200 DC 1500V/200A diode-resistor network as per
IEC61000-4-5 ed. 3, Amendment 1

38 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

CDN-F-125
Standard IEC61000-4-4 latest edition
Type 3-ph., manual
Coupling paths L1, L2, L3, N, PE, all → ground, any combination
EUT voltage AC max. 3 x 690V L-L, 50 / 60 Hz
EUT current AC max. 3 x 125A
EUT voltage DC max. 1000V
EUT current DC max. 125A @ 1000 V
Current flow bi-directional (source to EUT and EUT to source)
Test level burst (as per IEC) max. 7.1 kV with IMU-MGE
Residual voltage typically < 5 %
Dimensions 19” unit, 4 UH
Weight 14 kg.
Included in delivery 10 connectors (power, EUT)
adapter for burst calibration
Generators IMU-MGS, IMU-MGE

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 39

 COMMON MODE COUPLING NETWORKS
AND DECOUPLING NETWORKS
Test type CN 16 CN16 DC DN16-1P6 EUT DN16-1P16 EUT

AC test on AC lines 415 V - 230 V / 6 A 230 V / 16 A

AC test on DC lines 415 V - - -

DC test on AC lines 115 V(115 V test level) 250 V / 16 A 230 V / 6 A 230 V / 16 A

DC test on DC lines 115 V(115 V test level) 250 V / 16 A - -

Sweep test on AC lines 415 V - 230 V / 6 A 230 V / 16 A

Sweep test on DC lines 415 V - - -

CN16

Standard IEC 61000-4-16 latest edition

Type manual, for 1, 2 or 4 power lines
EUT voltage AC (see table) max. 3 x 415 V L-L (240 V L-N), 50 / 60 Hz
EUT current AC limited only by decoupling
EUT power DC (see table) max. 300 V (AC/RF disturbance) no current limit
Coupling paths 1 x 100 Ω, 2 x 200 Ω, 4 x 400 Ω, 1 µF per line
Test level power tests 330 V @ 16.67 Hz, 50 Hz, 60 Hz, 115 V @ DC
Test level sweep test 35 V
Dimensions 28 x 18 x 11 cm
Weight 3 kg
Optional PS3, EXT-IMU C-SHORT
DN16-1P6 or DN16-1P16 decoupling transformer
Generators IMU-MGS, IMU-MGE

CN16-300
Standard IEC 61000-4-16 latest edition
Type manual, for 3 power lines
EUT voltage AC max. 3 x 480 V L-L (280 V L-N), 50 / 60 Hz
EUT current AC limited only by decoupling
EUT power DC max. 115 V (AC/RF disturbance) no current limit
Coupling paths 3 x 300 Ω, 1 µF per line
Test level power tests 330 V @ 16.67 Hz, 50 Hz, 60 Hz, 115 V @ DC
Test level sweep test 35 V
Dimensions 28 x 18 x 11 cm
Weight 3 kg
Optional PS3, EXT-IMU C-SHORT
DN16-1P6 or DN16-1P16 decoupling transformer
Generators IMU-MGS, IMU-MGE

40 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

CN16DC
Standard IEC 61000-4-16 latest edition
Type manual, for 2 power lines
EUT power AC (see table) 250 V, 50 / 60 Hz, 16 A
EUT power DC (see table) 250 V, 16 A
Coupling paths 2 x 200 Ω
Test level power tests 330 V DC on AC and DC lines
Dimensions 28 x 19 x 11 cm
Weight 3 kg
Requires PS3, EXT-IMU C-SHORT
Optional DN16-1P6 or DN16-1P16 decoupling transformer
Generators IMU-MGS, IMU-MGE

CN16T
See section “Other CDNs for I/O Lines”

CN16-22-7C
Standard IEC60255-26 latest edition
Type manual, for 2 power lines, common mode test
EUT power AC 415 V, 50 / 60 Hz, 16 A
EUT power DC 300 V, 16 A
Coupling path 2 x 220 Ω ± 5 %, 0.47 µF ± 5 % per line
Test level max. 300 V
Dimensions 28 x 18 x 11 cm
Weight 3.3 kg
Requires PS3, EXT-IMU C-SHORT
Generators IMU-MGS, IMU-MGE

CN16-22-7D
Standard IEC60255-26 latest edition
Type manual, for 2 power lines, diff. mode test
EUT power AC 415 V, 50 / 60 Hz, 16 A
EUT power DC 300 V, 16 A
Coupling path 1 (class A) 2 x 100 Ω ± 5 %, 0.1 µF ± 5 % per line
Coupling path 2 (class B) 2 x 100 Ω ± 5 %, 0.47 µF ± 5 % per line
Test level max. 300 V
Dimensions 28 x 18 x 11 cm
Weight 3.5 kg
Requires PS3, EXT-IMU C-SHORT
Generators IMU-MGS, IMU-MGE

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 41

 DN16-1P6
Standard IEC 61000-4-16c
Type 1P decoupling transformer for power lines
EUT power AC (see table) 230 V, 50 / 60 Hz, 6 A
EUT power DC not suitable for DC applications
Test level max. 330 V
Insulation ≥1 kV
CM decoupling > 60 dB in the range 15 Hz – 150 kHz
Dimensions 19 “ unit, 4 UH
Weight 30 kg
Requires CN16 or CN16DC
Generators IMU-MGS, IMU-MGE

DN16-1P16
Standard IEC 61000-4-1 latest edition
Type 1P decoupling transformer for power lines
EUT power AC (see table) 230 V, 50 / 60 Hz, 16 A
EUT power DC not suitable for DC applications
Test level max. 330 V
Insulation ≥1 kV
CM decoupling > 60 dB in the range 15 Hz – 150 kHz
Dimensions 19 “ unit, 4 UH
Weight 50 kg
Requires CN16 or CN16DC
Generators IMU-MGS, IMU-MGE

42 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

CDNs FOR SURGE & RING WAVE I/O (DATA) LINES

Type of lines Line CDN-KIT1000 ED3 CDN-DATA-4L CDN-DATA-8L CDN-UTP ED3 CDN-UTP8 ED3

Unsymmetrical, Yes, Yes, max 4 Yes, max 8 Yes, max 2 Yes, max 4
unshielded max 2 lines lines lines lines lines

Symmetrical, Yes, max 4 Yes, max 8

- - -
unshielded lines lines

Unsymmetrical,
shielded
No CDN required, surge and ring wave are
applied on the shield directly from generator
Symmetrical,
shielded

CDN-KIT1000 ED3

Standard IEC 61000-4-5 latest edition

Application surge on 2 unsymmetrical lines, figure 9
Test level surge max. 6 kV
Low speed I/O unsymmetrical, coupling with capacitor
EUT voltage per line max. 200 V DC or 240 V peak
EUT current per line max. 4 A cont. or 5 A for 5 min.
Coupling path 1 40 Ω + 0.5 µF capacitor
Decoupling 1 20 mH per line (protected 275 V max.)
Higher speed I/O unsymmetrical, coupling with diode
EUT voltage per line max. 24 V DC or peak
EUT current per line max. 3 A cont. or 5 A for 5 min.
Coupling path 2 40 Ω + 27 V diode
Decoupling 2 560 Ω per line (protected 18 V max.)
Dimensions 4 modules in carrying case: 33 x 27 x 17 cm
Weight 7 kg (all modules and carrying case)
Generators IMU-MGS, IMU-MGE, other EMCP models

CDN-DATA-4L
Standards IEC 61000-4-5, -4-12 latest editions
Application surge (fig. 9), ring wave on 4 asym. lines
EUT voltage per line max. 200 V DC or 240 V peak
EUT current per line max. 4 A cont. or 5 A for 5 min.
Line speed max. 100 kHz as per IEC 61000-4-5
Coupling path surge 1 40 Ω + 0.5 µF capacitor
Coupling path surge 2 40 Ω + 33 V bipolar diode
Coupling path surge 3 40 Ω + GDT 90 V, or any external element
Coupling path ring wave 1 33 V bipolar diode
Coupling path ring wave 2 any external element
Decoupling 20 mH per line, as per IEC 61000-4-5, -4-12
Test level surge max. 6 kV, coupling L-L, L-PE
Test level ring wave max. 6 kV, coupling L-L, L-PE (only IMU-MGE)

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 43

 Dimensions 19“ unit, 4 UH
Weight 17 kg
Generators IMU-MGS, IMU-MGE, other EMCP models

CDN-DATA-8L
Standards IEC 61000-4-5, -4-12 latest editions
Application surge (fig. 9), ring wave on 8 asym. lines
EUT voltage per line max. 200 V DC or 240 V peak
EUT current per line max. 4 A cont. or 5 A for 5 min.
Line speed max. 100 kHz as per IEC 61000-4-5
Coupling path surge 1 40 Ω + 0.5 µF capacitor
Coupling path surge 2 40 Ω + 33 V bipolar diode
Coupling path surge 3 40 Ω + GDT 90 V, or any external element
Coupling path ring wave 1 33 V bipolar diode
Coupling path ring wave 2 any external element
Decoupling 20 mH per line, as per IEC 61000-4-5, -4-12
Test level surge max. 6 kV, coupling L-L, L-PE
Test level ring wave max. 6 kV, coupling L-L, L-PE (only IMU-MGE)
Dimensions 19“ unit, 4 UH
Weight 25 kg
Generators IMU-MGS, IMU-MGE, other EMCP models

CDN-UTP ED3
Standards IEC 61000-4-5, IEC 61000-4-12 latest editions
Application 1 (1.2 / 50 µs) surge (fig. 10) on up to 4 sym. lines
Application 2 (1.2 / 50 µs) surge (fig. 9) on up to 2 asym. lines
Application 3 ( 10 / 700 µs) telecom surge (fig. A.4) on up to 4 asym. lines
Aplication 4 (0.5 µs /100kHz) ring wave as per fig. 8, 9 and 10
EUT voltage per line max. 300 V DC or peak
EUT current per line max. 1 A cont., total for all lines max. 2A
EUT line(s) characteristics high speed, over 100 Mbps on 4 wires (2pairs)
Example of EUT I/O lines RS485, USB, Ethernet 4 wires, CAN bus, etc.
Coupling path surge 1 2 x 80 Ω for 2 lines or 4 x 160 Ω for 4 lines
Coupling path surge 2 1 x 40 Ω + 0.5 µF
Coupling path tel. surge 3 2 x 25 Ω for 2 lines or 4 x 25 Ω for 4 lines
Coupling path ring wave 2 x GDT 90 V or 4 x GDT 90 V or 1 x 0.5 µF
Coupling elements 2 x GDT 90 V or 4 x GDT 90 V or 1 x 0.5 µF
Decoupling up to 4 x 20 mH per line, current compensated
AE protection 4 x GDT 90 V or customer defined
Test level surge, ring wave max. 6 kV, coupling CM and DM
Test level telecom surge max. 6 kV, coupling CM (only IMU-MGE)
Dimensions 19“ unit, 4 UH
Weight 40 kg
Included Mentioned coupling elements, AE protection
Optional ADAPTER BOX RJ45 (ask for details)
Other relevant standards ITU-T K20, K21, K44, FCC part 68 / D
Generators IMU-MGS, IMU-MGE, other EMCP models

44 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

CDN-UTP8 ED3
Standards IEC 61000-4-5, IEC 61000-4-12 latest editions
Application 1 (1.2 / 50 µs) surge (fig. 10) on up to 8 sym. lines
Application 2 (1.2 / 50 µs) surge (fig. 9) on up to 4 asym. lines
Application 3 ( 10 / 700 µs) telecom surge (fig. A.4) on up to 8 asym. lines
Aplication 4 (0.5 µs /100kHz) ring wave as per fig. 8, 9 and 10
EUT voltage per line max. 300 V DC or peak
EUT current per line max. 1 A cont., total for all lines max. 2A
EUT line(s) characteristics high speed, up to 1 Gbps
Example of EUT I/O lines RS485, USB, Ethernet 1Gbps, CAN bus, etc.
Coupling path surge 1 2 x 80 Ω, 4 x 160 Ω, 8 x 320 Ω
Coupling path surge 2 1 x 40 Ω + 0.5 µF
Coupling path tel. surge 3 2 x 25 Ω or 4 x 25 Ω or 8 x 25 Ω
Coupling path ring wave 2 or 4 or 8 x GDT 90 V or 1 x 0.5 µF
Coupling elements 2 or 4 or 8 x GDT 90 V or 1 x 0.5 µF
Decoupling up to 8 x 20 mH per line, current compensated
AE protection 8 x GDT 90 V or customer defined
Test level surge, ring wave max. 6 kV, coupling CM and DM
Test level telecom surge max. 6 kV, coupling CM (only IMU-MGE)
Dimensions 19“ unit, 8 UH
Weight 78 kg
Included mentioned coupling elements, AE protection
Optional ADAPTER BOX RJ45 (ask for details)
Other relevant standards ITU-T K20, K21, K44, FCC part 68 / D
Generators IMU-MGS, IMU-MGE, other EMCP models

CN-R40C05
Standard EN50121-4 latest edition
Application surge on 2 unsymmetrical lines
Test level surge max. 6 kV
Low speed I/O + Railway unsymmetrical, coupling with capacitor
Coupling path 1 40 Ω + 0.5 µF capacitor or simply 40 Ω
EUT current determined by CDN used for decoupling
EUT voltage 440V AC/DC
Dimensions 1 module
Weight 1 kg
Requires IMU internal CDN or external CDN
Generators IMU-MGS, IMU-MGE, other EMCP models

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 45

 CN-R40C05 8
Standard EN50121-4 latest edition
Application surge on 2 unsymmetrical lines
Test level surge max. 8 kV
Low speed I/O + Railway unsymmetrical, coupling with capacitor
Coupling path 1 40 Ω + 0.5 µF capacitor
EUT current determined by CDN used for decoupling
EUT voltage 440V AC/DC
Dimensions 1 module
Weight 1 kg
Requires IMU internal CDN or external CDN
Generators IMU-MGS, IMU-MGE, other EMCP models

OTHER CDNs FOR I/O LINES

CN16T
Standard IEC 61000-4-16 latest edition
Type manual, for 2 symmetrical I/O lines
EUT voltage max. 250 V (AC test), max. 110 V (DC test)
EUT current max. 0.5 A
Coupling path 2 x 200 Ω, + 4.7 µF per line
Test level continuous 35 V
Test level short duration 330 V (bridge open), 115 V (bridge closed)
Dimensions 28 x 18 x 11 cm
Weight 3 kg
Generators IMU-MGS, IMU-MGE

CN16T4
Standard IEC 61000-4-16 latest edition
Type manual, for 4 symmetrical I/O lines
EUT voltage max. 63 V (AC), max. 100 V (DC)
EUT current max. 0.5 A
Coupling path 4 x 400 Ω, + 4.7 µF per line
Test level continuous 35 V
Test level short duration 330 V (bridge open), 115 V (bridge closed)
Dimensions 30.5 x 23 x 11 cm
Weight approx 5 kg
Generators IMU-MGS, IMU-MGE

46 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

CDN-DOW-DATA-LF
Standard IEC61000-4-18, IEC60255-26, ANSI C37.90
latest editions
Application manual CDN for applying SLOW DOW
on max. 8 lines
Frequency DOW 100 kHz, 1 MHz ± 10 %
Rise time 75 ns ± 20 %
Source impedance 200 Ω
Decaying Pk5 to Pk1 > 50 %, Pk10 to Pk1 < 50 %
EUT voltage per line max. 250 V DC or AC 50/60 Hz
EUT current per line max. 4 A
Coupling differential mode (line to line)
CM: one pair to all other pairs (floating)
CM: one pair to all other pairs (grounded)
Decoupling > 1.5 mH per line
Voltage test level 200 V - 4400 V ± 10 %
Short circuit current 1 A – 22 A ± 20 %
Dimensions 30.5 x 23 x 11 cm
Weight 5 kg
Generators DOW-CG1, all models with SLOW module

CDN-DOW-DATA-HF18
Standard IEC61000-4-18 SLOW DOW latest edition
Application manual CDN for applying SLOW DOW
on max. 8 sym. high speed lines (1 Gbps)
Frequency DOW 100 kHz, 1 MHz ± 10 %
Rise time 75 ns ± 20 %
Source impedance 200 Ω
Decaying Pk5 to Pk1 > 50 %, Pk10 to Pk1 < 50 %
Number of data lines 4 lines / 2 pairs, 8 lines / 4 pairs
EUT voltage per line max. 60 V DC (PoE) or signal voltage
EUT current per line max. 1 A (PoE all versions)
Coupling as per IEC61000-4-18
Decoupling > 1.5 mH per line
Voltage test level 200 V - 4000 V ± 10 %
Short circuit current 1 A – 20 A ± 20 %
Dimensions 30.5 x 23 x 11 cm
Weight 3.7 kg
Generators DOW-CG1, all models with SLOW module
Optional accessories ADAPTER BOX RJ45-8L (2 pieces needed)

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 47

 ACCESSORIES

ACCESSORIES AS PER IEC 61000-4-2

EXT-IMU E, ESD add-on 16 kV

Discharge network 150 pF, 330 Ω
Rise time 0.8 ns ± 25 %
Current waveform as per IEC 61000-4-2
Discharge modes air (AD) and contact (CD)
Voltage range AD / CD 2 – 16 kV ± 5 % / 2 – 10 kV ± 5 %
Continuous firing mode 2 – 16kV ± 5 %
Voltage increment 1 V step
Discharge repetition CD 0.05 s – 30 s (max. 20 Hz)
Discharge Polarity positive, negative, alternating
Counter pre-selectable 1-29999, discharge detection
Ramp Voltage
Temparature range 15 - 35 °C
Humidity 30 - 60% non condensing
Generators IMU-MGS, IMU-MGE

ESD-TARGET2
Application current target for calibration of ESD generator
Input impedance 2Ω
Input voltage max. 10 kV CD
Frequency range ± 0.5 dB up to 1 GHz, ± 1.2 dB up to 4 GHz
Current range 0 – 50 A standard, could be extended
Transfer function 0.2 V / 1 A with 20 dB
Diameter 70 mm
Thickness 40 mm
Weight 1 kg
Fixing 8 x M3 screws, not included in delivery
Included 20 dB att., 50 Ω coax. cable (1 m) with BNC out

48 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

ESD-VERI-V
Application adapter for ESD DC voltage measurement
Input impedance 20 GΩ || 3 pF
Input voltage range 0 – 32 kV
Output voltage range 0 – 1.6 V
Output connector BNC
Dimensions 17 cm height, 5.5 cm diameter
Weight 0.5 kg
Included earth conductor

ESD-STAND Ed2
Application stand for supporting ESD gun, fixed point test
Height 50 – 180 cm, adjustable
Position 360˚ adjustable
Dimensions 64 x 17 x 12 cm (packed)
Weight 4 kg
Included cable holder for calibration

EARTH CABLE
Application connection of HCP or VCP to ground plane
Impedance 2 x 470 kΩ
Length 2m
Connectors 2 x banana plugs

ESD-VCP50
Application indirect ESD application as per standard
Spacer in between 10 cm plastic spacer
Coupling plane 50 x 50 cm
Application points one on each side
Dimensions 50 x 50 x 10 cm
Weight 8 kg
Included 2 m earth cable (with 2 x 470 kΩ)

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 49

 ACCESSORIES AS PER IEC 61000-4-4

CN-EFT1000
Application capacitive coupling clamp for burst on I/O lines
Coupling plate dimensions as per IEC 61000-4-4 latest edition
Waveform into 50 Ω 5 ± 1.5 ns / 50 ± 15 ns
Insulation 5/50 ns up to 8 kV
Insulation DOW up to 5kV 3 MHz - 30 MHz
Insulation 1.2/50 µs up to 5 kV
Usable cable diameter up to 70 mm
Coupling capacitance typically 100 pF – 1000 pF
Dimensions 114 x 15 x 10 cm
Weight 4 kg
Included high voltage cable for connection to IMU
Other applications IEC 61000-4-18, ANSI C37.90

CN-BALUN-AC
Application differential mode burst test adapter
Standards applicable ANSI C37.90, fig. 6, ISO7637-4
Input 7.1 kV Burst signal, common mode
Output 7.1 kV signal, differential mode, line to line
EUT voltage max. 480 V L-L @ 50, 60 Hz
Decoupling 2 x 66 nF built-in
Dimensions 18 x 10 x 8 cm
Weight 2 kg including accessories
Included 2 x test tips and cables, cable to generator

VERI50 EFT
Application 50 Ω calibration load for burst
Input impedance 50 Ω ± 2 %
Input voltage max. 7.1 kV, max. 350 pulses/s @ 7.1 kV
Tolerance up to 100 MHz ± 1 dB, as per standard
Tolerance up to 400 MHz ± 3 dB in the range 100 MHz – 400 MHz
Power dissipation max. 3 W, no EUT power during calibration
Ratio 50 Ω DSO input 1 :1000, 60 dB
Ratio 1MΩ DSO input 1:500, 54 dB
Dimensions 15.5 x 2.5 x 2.5 cm
Weight 0.2 kg
Other applications IEC 61000-4-18

50 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

VERI1K EFT
Application 1 kΩ calibration load for burst
Input impedance 1 kΩ ± 2 %
Input voltage max. 7.1 kV, max. 350 pulses/s @ 7.1 kV
Tolerance up to 100 MHz ± 1 dB, as per standard
Tolerance up to 400 MHz ± 3 dB in the range 100 MHz – 400 MHz
Power dissipation max. 3 W, no EUT power during calibration
Ratio 50 Ω DSO input 1 :2000, 66 dB
Ratio 1MΩ DSO input 1:1000, 60 dB
Dimensions 13.5 x 2.5 x 2.5 cm
Weight 0.2 kg
Other applications IEC 61000-4-18, OC calibration for fast DOW

VERI-CP-EFT
Application calibration transducer plate for CN-EFT1000
Plate width 120 ± 1 mm, as per norm
Plate length 1050 ± 5 mm, as per norm
Insulation 5/50 ns up to 7.1 kV
Insulation 1.2/50 µs minimum 2.5 kV
Dimensions 113 x 7 x 5 cm
Weight 1 kg
Requires VERI50 EFT
Other applications IEC 61000-4-18

EFT-INSULATION
Application EUT support for burst test
Number of plates 2 pieces
Height of plates 10 cm
Surface of both plates 100 x 40 cm
Maximum EUT weight 50 kg
Dimensions 100 x 40 x 10 cm (both plates)
Weight 16 kg (both plates)
Other applications IEC 61000-4-9, IEC 61000-4-10

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 51

 ACCESSORIES AS PER IEC 61000-4-5

V-PROBE-SI VOLTAGE PROBE

Application measurement of surge U waveform up to 7 kV
Type of probe differential (can measure CM as well)
Waveforms 1.2/50 µs, 10/700 µs, 0.5 µs/100 kHz ring wave
slow DOW
Bandwidth DC – 70 MHz (-3 dB)
Accuracy ±2%
Input impedance 10 MΩ || 10 pF
Input voltage max. 7 kV DC + peak, max. 2.5 kV r.m.s.
Attenuation ratio 1:100 or 1:1000
Power supply 4 x AA batteries and/or mains adapter
Probe dimensions 20.2 x 8.3 x 3.8 cm
Weight 0.5 kg
Included carrying case, mains adapter, AA batteries

I-PROBE-P101 CURRENT PROBE

Application measurement of surge I waveform up to 5 kA
Output impedance 50 Ω
Waveforms 8/20 µs (surge), 5/320 µs (telecom surge)
Current rating 5 kA peak or 200 A r.m.s.
Bandwidth 0.25 Hz - 4 MHz (-3 dB)
Sensitivity 0.01 V / A into 1 MΩ
Accuracy +1 % / -0 %
Current time product 2.5 As
I/f 12 A / Hz
Probe dimensions 12 x 10 x 3 cm, inner diameter 5 cm
Weight 1 kg
Included carrying case

WARNING-LAMP
Cable length 5m
Dimensions diameter 7x cm x 25 cm
Weight 0.5 kg

EMERGENCY-STOP
Cable length 5m
Dimensions 8 cm x 8 cm x 10cm
Weight 0.3 kg

TC-ST
Insulation withstand 36 kV 1.2/50 µs impulse
max. EUT dimension 20 cm x 20 cm x 30 cm
Material 7 mm acrylic glass
Safety Features locked cover during test
External Warning Lamp M12 / 5-pol connector
Dimension 47 cm x 43.5 cm x 25.4 cm
Weight 8.5 kg

52 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

ACCESSORIES AS PER IEC 61000-4-8

MF1000-1
Application coil for AC magnetic field, magnetic pulses
Coil type 1 x 1 m, one turn, as per standard
Coil factor 0.87
Magnetic field 50, 60 Hz 1 – 160 A / m, continuous (IEC 61000-4-8)
Duration continuous MF 29999 s
Magnetic pulse 8/20 µs 93 – 1521 A / m or 1855 A / m (IEC 61000-4-9)
with 2 coils up to 1000 A / m (≥ 5kV surge)
Magnetic pulse DOW up to 220 A / m (IEC 61000-4-10)
Dimensions 120 x 100 x 10.5 cm
Weight 6 kg

MF1STAND
Application stand for MF1000-1
Height 0.2 - 1.8 m
Adjustable on all 3 directions, 360˚
Dimensions 60 x 50 cm stand
Weight 16 kg

MF1000-2
Application coil for AC magnetic field, magnetic pulses
Coil type 1 x 2.6 m, one turn, as per standard
Coil factor 0.66
Magnetic field 50, 60 Hz 1 – 110 A / m, continuous (IEC 61000-4-8)
Duration continuous MF 29999 s
Magnetic pulse 8/20 µs 67 – 1103 A / m or 1345 A / m (IEC 61000-4-9)
Magnetic pulse DOW up to 110 A / m (IEC 61000-4-10)
Dimensions 260 x 100 x 10.5 cm
Weight 24 kg

MF1000-3
Application coil for short duration magnetic field
Coil type 1 x 1 m, one turn, as per standard
Coil factor 0.87
Magnetic field 50, 60 Hz 150 – 500 A / m, continuous (IEC 61000-4-8)
Duration continuous MF 29999 s
Magnetic field 50, 60 Hz 150 – 1100 A / m, short term (IEC 61000-4-8)
Duration short term MF 3s
Dimensions 100 x 100 x 13 cm
Weight 18 kg

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 53

 MF3STAND
Application stand for MF1000-3
Height 0.2 - 1.8 m
Adjustable 360˚, easy to move
Dimensions 2 x (60 x 50 cm) stands
Weight 32 kg

ACCESSORIES AS PER IEC 61000-4-9

See IMU-MGS EXT-IMU S4 | EXT-IMU S5
See IMU-MGE EXT-IMU S6 | EXT-IMU S8
See MF1000-1
See MF1000-2

ACCESSORIES AS PER IEC 61000-4-10

See DOW-CG1
See MF1000-1
See MF1000-2

ACCESSORIES AS PER IEC 61000-4-11, -4-34

VAR-EXT1000

Application 1P variac for dips and variations, IEC61000-4-11

latest edition
Input voltage AC 50 – 250 V, 50/60 Hz
Output voltage 1 input voltage
Output voltage 2 dips 0 – 110 % from input voltage, max. 275 V
Output voltage 2 variations 0 – 100 % from input voltage, max. 250 V
EUT current max. 16 A continuous
Voltage slew rate < 1.7 s from 0 to 100 %
Dimensions 19“ unit, 4 UH
Weight 29 kg

54 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

SRC16-1P

Application 1P step transformer for dips test, IEC61000-4-11

Input voltage AC max. 300 V, 50/60 Hz
Output voltage AC 40 %, 70 %, 80 %, 100 % ± 5 % from input volt.
EUT continuous current max. 16 A continuous
Short time output current 80 %: 20 A for 5 s
70 %: 23.6 A for 5 s
40 %: 40 A for 3 s
Voltage change with load < 5 % of input (when input V ≥ 100 V)
Dimensions 28 x 23 x 10 cm
Weight 17.5 kg

VERI-DIPS
Application calibration of inrush current before dips test
Current range 1 A – 1 kA
Capacitance 1700 µF ± 20 %
Discharge resistor 4.7 kΩ ± 10 %
DSO output 1 V = 400 A, BNC connector
Dimensions 20 x 10 x 11 cm
Weight 1 kg

DIPS100E
Application calibration of dips switch time
Resistor 100 Ω ± 5 %, non-inductive
Power max. 1 kW
Impulse insulation 3 kV
Dimensions 65 x 12 x 8 cm
Weight 3.8 kg

PFS32
Application 3P AC dips generator, IEC 61000-4-34
EUT AC voltage L-L 3 x 200 V – 3 x 480 V, 50 or 60 Hz
EUT AC current max. 3 x 32 A
Output connection star or delta connection possible
Overcurrent protection 50 A per phase continuous, 220 A short term
Rise & fall time into 100 Ω 1 – 5 µs for AC
Inrush current capability > 500 A
Dip / interruption duration 50 µs – 60 s
Synchronization 0 – 359˚, resolution 1˚
Output monitor BNC 3 x I (1 V : 100 A), 3 x U (1 V : 100 V)
Dimensions 19“ unit, 4 UH
Weight 26 kg
Controlled by IMU-MGS D, IMU-MGE D
Requires SRC32-18UH, SRC32-AMD1/AMD1-36UH

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 55

 SRC32-18UH
Application 3P tapped transformer for PFS32
Construction type automatic switch between dip levels
EUT AC voltage L-L 3 x 200 V – 3 x 480 V, 50 or 60 Hz, Y or Δ
EUT AC current max. 3 x 32 A at nominal voltage
Overcurrent protection 50 A per phase continuous, 220 A short term
Dip levels 0 %, 40 %, 70 %, 80 %, selectable
Dimensions 19” rack (wheels), 18 UH
Weight 307 kg
Alternative rack 36 UH rack available (ask for details)
Controlled by PFS32

SRC32-AMD1-18UH / 36UH
Application 3P tapped transformer for PFS32
Construction type automatic switch between dip levels
EUT AC voltage L-L 3 x 200 V – 3 x 480 V, 50 or 60 Hz, Y or Δ
EUT AC current max. 3 x 32 A at nominal voltage
Overcurrent protection 50 A per phase continuous, 220 A short term
Dip levels 0 %, 40 %, 50 %, 70 %, 80 %, selectable
Dimensions 19” rack (wheels), 18 UH
Weight 317 kg
Alternative rack 36 UH rack available (ask for details)
Controlled by PFS32

PFS75
Application 3P AC dips generator, IEC 61000-4-34
EUT AC voltage L-L 3 x 200 V – 3 x 480 V, 50 or 60 Hz
EUT AC current max. 3 x 75 A
Output connection star or delta connection possible
Overcurrent protection 220 A short term (< 2 s)
Rise & fall time into 100 Ω 1 – 5 µs for AC
Inrush current capability > 1000 A
Dip / interruption duration 50 µs – 60 s
Synchronization 0 – 359˚, resolution 1˚
Output monitor BNC 3 x I (1 V : 100 A), 3 x U (1 V : 100 V)
Dimensions 19“ unit, 8 UH
Weight 40 kg
Controlled by IMU-MGS D, IMU-MGE D
Requires SRC75-18 UH

56 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

SRC75-18UH
Application 3P tapped transformer for PFS75
Construction type automatic switch between dip levels
EUT AC voltage L-L 3 x 200 V – 3 x 480 V, 50 or 60 Hz, Y or Δ
EUT AC current max. 3 x 75 A at nominal voltage
Overcurrent protection 220 A short term (< 2 s)
Dip levels 0 %, 40 %, 70 %, 80 %, selectable
Inrush current > 1000 A
Dimensions 19” rack (wheels), 18 UH
Weight 332 kg
Alternative rack 36 UH rack available (ask for details)
Controlled by PFS75

PFS75-690V
Application 3P AC dips generator, IEC 61000-4-34
EUT AC voltage L-L 3 x 200 V – 3 x 690 V, 50 or 60 Hz
EUT AC current max. 3 x 75 A
Output connection star or delta connection possible
Overcurrent protection 220 A short term (< 2 s)
Rise & fall time into 100 Ω 1 – 5 µs for AC
Inrush current capability > 1000 A
Dip / interruption duration 50 µs – 60 s
Synchronization 0 – 359˚, resolution 1˚
Output monitor BNC 3 x I (1 V : 100 A), 3 x U (1 V : 100 V)
Dimensions 19“ unit, 8 UH
Weight 54 kg
Controlled by IMU-MGS D, IMU-MGE D
Requires SRC75-690V

SRC75-690V-18UH
Application 3P tapped transformer for PFS75-690V
Construction type automatic switch between dip levels
EUT AC voltage L-L 3 x 200 V – 3 x 690 V, 50 or 60 Hz, Y or Δ
EUT AC current max. 3 x 75 A at nominal voltage
Overcurrent protection 220 A short term (< 2 s)
Dip levels 0 %, 40 %, 70 %, 80 %, selectable
Inrush current > 1000 A
Dimensions 19” rack (wheels), 36 UH
Weight 332 kg
Controlled by PFS75-690V

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 57

 ACCESSORIES AS PER IEC 61000-4-12
See voltage probe from Surge.

ACCESSORIES AS PER IEC 61000-4-16

EXT-IMU C-SHORT
Application extension for IMU -C module, power tests
Output impedance 50 Ω ± 10 %
Output voltage 30 V – 330 V for 1000 seconds
Power frequencies DC, 16.67 Hz, 50 Hz, 60 Hz
Disturbance duration 1 s – 1000 s to full test level
Dimensions 19“ unit, 4 UH
Weight 54 kg
Controlled by IMU-MGS C, IMU-MGE C
Requires PS3, CN16 or CN16DC or CN16T

PS3
Application 1P power source for IEC 61000-4-16, 300V test
Type programmable, pre-programmed buttons
Input AC 100 V – 240 V, 47 – 63 Hz
Output voltage AC 50 – 250 V, DC 24 – 350 V
Output frequency DC – 400 Hz
Output current max. 16A @ 115V / 60Hz, 10 A @ 230V / 50Hz
Output power max. 3 kW or 3 kVA
Dimensions 19“ unit, 2 UH
Weight 18 kg
Controlled by IMU-MGS C or IMU-MGE C for power test
Requires EXT-IMU C-SHORT, RS485-RS232 ADAPT.
Other applications IEC 61000-4-19, IEC 61000-4-29

58 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

ACCESSORIES AS PER IEC 61000-4-18

VERI50 EFT
See VERI50 EFT technical specification.

VERI1K EFT
See VERI1K EFT technical specification.

VERI01 OSI
Application 0.1 Ω shunt for 3, 10, 30 MHz DOW SC current
Input impedance 0.1 Ω ± 2 %
Input voltage max. 6.3 kV
3 dB bandwidth > 400 MHz
Power dissipation max. 3 W, max. 1000 spikes/s @ 4.4 kV
Measurement ratio 1 V @ 10 A in 1 MΩ ± 2 %
Dimensions 8.5 x 2.5 x 2.5 cm
Weight 0.1 kg
At CDN output Calibration adapter delivered with DOW-CG1

ACCESSORIES AS PER IEC 61000-4-19 LATEST

IMU SLAVE SMART I1V1*

Application voltage & current test generator IEC 61000-4-19
Voltage test module
EUT voltage input 80 – 500 V, L-L or L-N, 50 Hz and 60 Hz
EUT current input 0 – 16 A L-L or L-N
Voltage waveform sinusoidal, THD < 5%
Test voltage 0.1 V – 25 V, tolerance ±5%
Output frequency range 2 kHz – 150 kHz
CDN output impedance 10 Ω ±30%, 2 kHz – 150 kHz
CDN decoupling better than -10dB@10kHz, -50dB@50 kHz, -50dB@150kHz
Frequency step 2 % standard, adjustable 1 % - 100 %
Dwell time 3s standard, adjustable 1 s – 300 s
Pause time 300 ms ± 200 ms, adjustable 0.1 s – 30 s
Signal type continuous / pause, 50% rect. modulation
Modulation frequency for 50 Hz: 3 Hz, 101 Hz, 301 Hz, 601 Hz
for 60 Hz: 4 Hz, 121 Hz, 361 Hz, 721 Hz
Modulation frequency 3 Hz – 1 kHz, adjustable
Calibration load 10 Ω load built-in, automatically switched

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 59

 Measurement and control internal, automatic
Current test module
EUT voltage input 80 – 500 V, L-L or L-N, 50 Hz, 60 Hz, 400 Hz
EUT current input 0 – 25 A L-L or L-N (0 – 15 A at 400 Hz)
Current waveform sinusoidal, THD < 5%
Test current 0.01 A – 4.4 A , tolerance ±5%
Output frequency range 2 kHz – 150 kHz
Output impedance 1 Ω ±30%, 2 kHz – 150 kHz
Decoupling impedance >1 Ω ±30%, 2 kHz – 150 kHz
Frequency step 2 % standard, adjustable 1 % - 100 %
Dwell time 3s standard, adjustable 1 s – 300 s
Pause time 300 ms ± 200 ms, adjustable 0.1 s – 30 s
continuous with pause, 50% rectangular mod-
Signal type
ulation
Modulation frequency for 50 Hz: 3 Hz, 101 Hz, 301 Hz, 601 Hz
for 60 Hz: 4 Hz, 121 Hz, 361 Hz, 721 Hz
Modulation frequency 3 Hz – 1 kHz, adjustable
Built-in reference load 1 – 25 A @50/60 Hz (15A @400 Hz), synchr. to
current source voltage input
Measurement, synch. internal, automatic
Dimensions 19“ unit, 4 UH (both modules)
Weight 22 kg
Controlled by IMU-MGS, IMU-MGE, any configuration
* Voltage or current modules can also be ordered separately, contact sales.

VERI10-50
Application 10 / 50 Ω calibration balun for SLAVE SMART
Input impedance 2 x 10 Ω ± 10 %
Output impedance 2 x 50 Ω ± 10 %
Frequency response 2 kHz – 200 kHz ± 0.5 dB
Damping limit 10 dB @ 2 kHz to 50 dB@ 150 kHz, linear var.
Dimensions 24 x 10 x 8 cm
Weight 1.2 kg

60 Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories

ACCESSORIES AS PER IEC 61000-4-29
PS3

See PS3 technical specification. 1 x PS3 power source needed for DC interruptions,
2 x PS3 power sources needed for DC dips.

EXT-IMU D-29D

Package including adjustment and calibration of IMU-MGS D, IMU-MGE D together

with 2 x PS3 and 2 x RS485-RS232 ADAPTER in order to ensure compliance of the test
system with IEC 61000-4-29 requirements for DC dips. Requires 2x Resistor 50Ohm.

EXT-IMU D-29I
Package including adjustment and calibration of IMU-MGS D, IMU-MGE D together
with 1 x PS3 and 1 x RS485-RS232 ADAPTER in order to ensure compliance of the test
system with IEC 61000-4-29 requirements for DC interruptions.

SOFTWARE

TEMA3000
Application modular control software for IMU / DOW system
License 1 license for 1 generator
TEMA3000 basic remote control of generator, single tests
TEMA3000-SEQUENCE more single tests linked in a sequence
TEMA3000-REPORT generation of customized test reports
TEMA3000-DSO control of DSOs via Ethernet, data in report
TEMA3000-LIBRARY collection of norm pre-programmed tests
Compatibility Windows XP, 7, 8, 10
For generators DOW, IMU Series, other

Overview IMU-MGS | IMU-MGE | DOW-CG1 | CDNs | Accessories 61

THE EMC PARTNER PRODUCT RANGE
Find further brochures on our website emc-partner.com/brochures or
contact your local representative for a hardcopy.

IMMUNITY TESTS
Transient Test Systems for all EMC tests on electronic equipment. ESD,
EFT, surge, AC dips, AC magnetic field, surge magnetic field, common
mode, damped oscillatory and DC dips. According to IEC and EN 61000-
4-2, -4, -5, -8, -9, -10, -11, -12, -13, -14, -16, -18, -19, -29.

LIGHTNING TESTS
Impulse test equipment and accessories for aircraft, military and tel-
ecom applications. Complete solutions for RTCA / DO-160 and EURO-
CAE / ED-14 for indirect lighting on aircraft systems, MIL-STD-461 tests
CS106, CS115, CS116, CS117, CS118 and Telecom, ITU-T .K44 basic and
enhanced tests for impulse, power contact and power induction.

COMPONENT TESTS
Impulse generators for testing varistors, gas discharge tubes (GDT),
surge protective devices (SPDs), X / Y capacitors, circuit breakers,
electricity meters, protection relays, insulation material, suppressor
diodes, connectors, chokes, fuses, resistors, emc-gaskets, cables, etc.

EMISSION MEASUREMENTS
Measurement of Harmonics and Flicker in 1-phase and 3-phase
electrical and electronic products according to IEC /EN 61000-3-2 and
61000-3-3 . HARCS Immunity software adds interharmonic tests, voltage
variation according to IEC/EN 61000-4-13, -4-14.

SYSTEM AUTOMATION
A full range of accessories enhance the test systems. Test cabinets, test
pistols, adapters and remote control software, simplify interfacing with
the EUT. Programmable PSU, EMC hardened for frequencies from 16.7Hz
to 400Hz. PS3-SOFT-EXT complies with IEC / EN 61000-4-14 and -4-28.

SERVICE
Our committment starts with a quality management system backing up
our ISO 17025 accreditation. With the SCS number 146, EMC PARTNER
provide accredited calibration and repairs. Our customer support team
is at your service!
 For further information please do not hesitate to contact your local EMC PARTNER AG representative.
Visit our website for more information and contact details.
For further information please do not hesitate to contact your local EMC PARTNER AG repre-
sentative.

www.emc-partner.com
Your will find a complete list of representatives on our website
www.emc-partner.com

Swiss Headquarters Your local representative

EMC PARTNER AG
Baselstrasse 160
CH - 4242 Laufen

Phone +41 61 775 20 30

Fax +41 61 775 20 59
Email [email protected]
Web www.emc-partner.com

Information and specifications in this document are an indication of capability only. Version 4.0 .Subject to change without notice. EMC PARTNER AG publishes only the
English version of this document. Translation into other languages is not guaranteed to be a true representation of content or specification.

© by EMC PARTNER AG. No changes or reproduction without permission of EMC PARTNER AG allowed.