Scribd
Upload
81 views

Technical Particulars of ACSR - ZEBRA

The document provides technical specifications for an ACSR Zebra conductor, including: 1. The conductor has 54 aluminum strands with a diameter of 3.18mm and 7 steel strands with the same diameter. 2. The calculated breaking strength is 130.32kN and calculated resistance at 20°C is 0.06868 ohms/km. 3. Both the aluminum and steel wires have specified minimum and maximum diameters and cross-sectional areas. The steel wires also have a zinc coating applied in 3 dips of 1 minute each.

Uploaded by

Manish Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views

Technical Particulars of ACSR - ZEBRA

The document provides technical specifications for an ACSR Zebra conductor, including: 1. The conductor has 54 aluminum strands with a diameter of 3.18mm and 7 steel strands with the same diameter. 2. The calculated breaking strength is 130.32kN and calculated resistance at 20°C is 0.06868 ohms/km. 3. Both the aluminum and steel wires have specified minimum and maximum diameters and cross-sectional areas. The steel wires also have a zinc coating applied in 3 dips of 1 minute each.

Uploaded by

Manish Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

GTP No.

47 Technical particulars of ACSR ZEBRA


A. ACSR ZEBRA
Sl.No. ACSR CONDUCTOR: ZEBRA Bidder's Offer
1 Size of conductor: 54/7/3.18 mm
2 Stranding and wire diameter
Aluminum 54/3.18 mm
Steel 7/3.18 mm
3 Sectional area of Aluminum 428.9
(in mm2)
4 Approximate total mass (in 1622
Kgs/KM)
5 Calculated resistance at 20°C 0.06868
Max.:(in Ohms/Km.)
6 Calculated breaking load of: 130.32 KN.
composite conductor (in KN)
(U.T.S.) (Min)
7 Lay Rating :-
Steel core Max- 28
Min-13
Aluminium Layers
12 Wire Layer Max-17
(Innermost Layer) Min - 10
18 Wire Layer Max - 16
(Lay immediately beneath Min - 10
outside Layer:
24 wire layer (outside layer) Max - 14
Min - 10
8 Modulus of elasticity (in Kg / 8158
mm2 ):0.7036 x 106 Kg x CM2
9 Co-efficient of linear 19.3 x 1 0-6
expansion of conductor per
degree centigrade.
10 Standard area of Cross 484.5 mm2
Section in Sq. mm of
11 Diameter of complete 28.62 mm
conductor in
1 Diameter Steel Aluminum
Standard (in mm) 3.18 3.18
Maximum (in mm) 3.24 3.21
Minimum (in mm) 3.12 3.15
Cross Sectional
Area of nominal
2 7.942 7.942
Diameter Wire (in
mm2)
3 Weight (in Kg/KM) 61.95 21.47
Minimum tensile
4 strength:As per relevant
ISS
Minimum
breaking load
5 10.43 1.29
before stranding
(in KN)
6 Minimum breaking load: 9.91 1.23
stranding (in KN)
Zinc coating of steel
7
strands
Number and duration: 3 dips of 1min
Minimum Weight of
(A s per 260 Coating (i n gm/ m

Maximum resistance at:


8 Ohms / KM)
Minim Purity of
9 99.50%
aluminum rod:

You might also like