Scribd
Upload
187 views

Purl Ins

Pennar Industries is an ISO 9001:2000 certified company that manufactures cold rolled steel sections, including purlins, at four plants in India. Pennar purlins are popular for constructing steel buildings due to their high strength-to-weight ratio. Pennar has supplied purlins for over 5,000 projects worldwide. Their product range includes sections like C-channels, lip channels, Z-purlins, and multi-beams between 1.5mm to 6mm thick. Pennar purlins provide advantages over hot rolled sections like reduced installation time and maintenance requirements.

Uploaded by

maheswarreddy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
187 views

Purl Ins

Pennar Industries is an ISO 9001:2000 certified company that manufactures cold rolled steel sections, including purlins, at four plants in India. Pennar purlins are popular for constructing steel buildings due to their high strength-to-weight ratio. Pennar has supplied purlins for over 5,000 projects worldwide. Their product range includes sections like C-channels, lip channels, Z-purlins, and multi-beams between 1.5mm to 6mm thick. Pennar purlins provide advantages over hot rolled sections like reduced installation time and maintenance requirements.

Uploaded by

maheswarreddy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Pennar

PENNAR INDUSTRIES LIMITED


(An ISO 9001:2000 Certified Company)

STRENGTH TO THE STRUCTURE

PENNAR PURLINS
Introduction
PENNAR INDUSTRIES LIMITED, an ISO 9001: 2000 accredited company having four manufacturing plants located at Patancheru, Isnapur (both near Hyderabad), Chennai and Tarapur. PENNAR manufactures different steel products like Cold Rolled Steel Strips, Cold Roll Formed Steel Sections, Engineering components, Metal Crash barriers for Road safety and ERW Tubes. Cold Roll Formed Steel Sections (CRFS) Division manufactures Products for Construction / Steel buildings / EPC industry (Metal decking, Purlins & Runners, Roofing sheets, etc), Special sections & Panels for Automobile & Engineering industries, Long profiled steel sheets such as Collecting and discharge electrodes for ESPs, Stringer channels for Material Handling industry, Trough floor & other sections for Railway wagons and coaches.

PENNAR PURLINS for Steel Buildings


All over the world, engineers are now taking keen interest in using Structural Steel as the basic material of construction for fast track projects. Considering the higher strength to weight ratio of CRF Sections, PENNAR PURLINS became very popular in the construction of any steel building, whether it may be a simple storage shed or a complex Turbo Generator building in a power plant. PENNAR PURLINS are well accepted by architects and structural consultants all over India. We supply a wide variety of sections like C-Channels, Lip Channels, Z-Purlins, Multi-beams, Angles and various other contours, usually in thickness range upto 6mm. Sections can be supplied in various grades of steel.

PENNAR.. everywhere
Today, there are more than 5000 buildings in India and abroad, where PENNAR PURLINS are used. Our clientele includes construction majors like L&T, Simplex, NCC, Gannon Dunkerly, Shapoorji Paloonji, Consolidated Construction Co, Lloyd Insulations for various projects in Power, Airports, Cement, Steel Plants, Metallurgical industries, Automobile, Textile, etc.

Product Range
Lip-Channels
15-25

Z-Purlin (900 Lip)


50-59

50-80
100-300

125-250

55-66

C-Channels
40-300

Z-Purlin (450 Lip)


60

Quality Policy
We, at Pennar, are committed to producing steel based products and associated service for customers all over the world. We strive to achieve excellence in the quality of products we manufacture and the service we provide to our customers.
60

40-100

Multi-Beam
76

Equal Angle (900)


180-270

It is our endeavour to creae a working environment where motivated employees communicate freely and where innovation is encouraged to enable continual improvement in all areas. We work together to achieve Complete Customer Satisfaction through Total Quality Management.

140-255

20x20 to 100x100

Thickness Length Material

: 1.5mm to 6mm : upto 12000mm : CR Steel as per IS:513 / HR Steel as per IS:1079

Yield Strength : 245 MPa to 345 MPa Type : Bare, Primer coated, Galvanized, Painted

We supply the suitable size of purlins with pre-punched condition and required cut-to-length as per customers specifications / drawings, for easy erection and also to avoid any wastage / rework at site.

Advantages of Pennar Purlins over conventional Hot Rolled Sections


Hot Rolled Sections Low strength-to-weight ratio Available without any surface finish Pennar Purlins Very high strength-to-weight ratio Sections provided with painted, powder-coated, galvanized or polyurethane-coated surface finish depending on customers requirements Sections are maintenance-free owing to application of proper surface finish Light sections reduce dead load and consequently lighter sections for structures and supports. Thus, the load on foundation is bare minimum Sections are factory-finished to avoid wastage

Sections require frequent maintenance Self-weight requires heavier sections for the structures and its supports thereby increasing load on foundation

High wastage since sections are available only in standard lengths and shapes Installation time high since sections need to be cut to length and fabricated at site Only standard sections available

Factory-finished sections drastically reduce installation time Optimum sections to meet exacting design specifications: no over-design possible Additional factor of safety due to increase in yield strength by cold forming

Factor of safety as per specifications

OTHER CRFS BUILDING PRODUCTS


35/248 Trapezoidal Roofing Profile 32/252 Trapezoidal Roofing Profile

75 / 230 Decking profile

52 / 271 Decking profile

44 / 130 Decking profile

Pennar

PENNAR INDUSTRIES LIMITED


(An ISO 9001:2000 Certified Company)

A leading manufacturer & supplier of Cold Roll Formed Sections, Pressed Components, ERW Precision Tubes & Cold Rolled Steel Strips
REGISTERED OFFICE 3rd Floor, Saptagiri Towers, Begumpet, Hyderabad - 500 016, India. Phone: +91 40 27766781, Fax: +91 40 27768056 Website: www.pennarindia.com

CENTRAL MARKETING OFFICE IDA, Patancheru, Medak Dist - 502 319 Phone: +91 8455 242184-93, Fax: +91 8455 242424 / 242161 E-mail: [email protected] MARKETING OFFICES Bangalore (080 23227703 / 23220667) Chennai (044 24893962) Coimbatore (0422 2539770) Faridabad (0129 2231235) Hosur (04344 276874) Hyderabad (040 27766781) Indore (0731 2705075) Kolkata (033 24843138) Mumbai (022 25375493) Pune (020 25548660) Tarapur (02525 272609 / 272517)

You might also like