P9740

And

1.Welcome 3
2.Warning 3
3.Note 4
4.Features 5
5.Basic Operation 6
6.Panel Arrangement 7
7.Basic Functions 8
8.Main Menu Touch Operation 10
9.OSD Setup 11
10.Remote Control Function 13
11.Disc Play Touch Operation 15
12.DVD Mode 17
13.RDS User Operation 19
14.Radio Operation 21
15.DVD Basic Operation 22
16.VCD Basic Operation 32
17.CD Basic Operation 35
18.MP3/USB/SD Operation 37
19.Other Play Mode 38
20.CCD/Trouble Shooting 39
21.Wiring Diagram 40
22.Specifications 41
23.Accessory 42

2
INSTRUCTIONS INSTRUCTIONS

23.ACCESSORY 1.WELCOME
Thank you for enjoying our serirs of digital car A/V product.
To properly use this product, please go through this instruction manual for installation
Accessory Quantity and operation, put it in a safe place for future use!

User Manual 1PC

2.WARNING
Wire 1PC 1. Please keep the disc slot clean, wipe it off when there is some dirt on it. You should
wipe off any dirt on the disc before you place it into the unit. If the disc is dirty and you
USB Cable 1PC place it inside the unit, it will cause the unit to go into an error and will not play the
disc. Please ask professional to clean the laser.

Remote Controller 1PC 2. Playing the radio at higher volumes for a long period of time may cause hearing
issues. You should play this unit at a moderate listen level.
Warranty card 2PCS
3. This unit is set up by precision parts. If you open up this unit, you will void any and
all of your warranty.

4. Please do not touch LCD display with any hard object so that you prevent it from
getting scratched or damaged.

5. To avoid an accident caused by watching the LCD screen. This unit has a vehicle
lock out wire so that you will not be allowed to watch a video while driving down the
road.

6. This unit is meant for a 12V power and negative ground system from a vehicle.

NOTE:
We keep improving this product all the time. There may be some changes in it that are
not in this manual.

42 3
INSTRUCTIONS INSTRUCTIONS
3.NOTE 22.SPECIFICATIONS:
● This unit can play the following disc
Power supply DC 12V
Power range 10.8-16.0V DC
Max operate current 10A
Dimensions 178X153X101MM
Ground system Negative ground
Amp Rating 85 Watts x 4 Channels

FM tuner
European frequency range 87.5-108MHz
USA frequency range 87.5-107.9MHz
Signal/Noisse ratio 55dB
Stereo separation 30dB
Search station volt 20-30dBuv
Distortion rate 1.5%

AM tuner
European frequency range 522-1620KHz
USA frequency range 530-1710KHz
Limit noise sensitivity 32dB

DVD PLAYER
Signal/Noise ratio 70dB
Frequency response 20Hz-20KHz

4 41
INSTRUCTIONS INSTRUCTIONS

21.WIRING DIAGRAM 4.FEATURES

DVD PLAYER
1. MPEG-4 Decoder Technology
2. Compatible with MP4 (AVI/5.X), DVD (DVD-R/DVD-RW), VCD,
SVCD, CD-RW, WMA, MP3, JPG
3. Supporting Multiple Subtitles, Angles, Languages
Blue/white-Remote Amp Turn On
4. Child lock function
5. 4-Channel Audio Output
6. Pause, Play, Up/Down, Stop, Zoom, PBC Function

RADIO
1. AM/FM Radio Tuner
2. 30 Radio Preset Stations (18FM, 12AM)

LCD DISPLAY
1. 7” - 16:9 TFT LCD Display
2. Touchscreen

40 5
5.BASIC OPERATION 20.CCD(Back-Up Camera)

VOL BAS TRE L/R

F/R
INSTRUCTIONS INSTRUCTIONS

19.OTHER PLAY MODE 6.PANEL ARRANGEMENT

1. SOURCE Button
2. Mute Button
3. VOL- Button
4. VOL+ Button
5. DN Button
6. UP Button
7. Menu Button
8. OPEN Button
9. RESET Button
10. Remote Control Receiver
11. AUX IN
12. MINI USB Port

38 7
INSTRUCTIONS INSTRUCTIONS

7.BASIC FUNCTION

1.SOURCE Button
press this button to power on,press this button longer to power off.In normal situation,
press this button can switch the playing mode.

2.MUTE / TFT on/off Button

Press this button to shut off the sound output, re-press this button can resume the sound
output, long press this button can turn off the TFT LCD display.

3.VOL- Button
Press this button shortly increase volume level one step by one step.
Press this button longer increase volume level continuously.

4.VOL+ Button
Press this button shortly decreasa volume level one step by one step.
Press this button longer decreasa volume level continuously.

5.DN Button
Short press this button to make the monitor glide down steply; Long press this button to
make the monitor glide down to the lowest position.

6.UP Button
Short press this button to make the monitor glide up steply; Long press this button to
make the monitor glide up to the top position.

7.MENU Button
press this button to back to the main menu in any made.

8.OPEN Button
Press this button can eject the disc.

9.RESET Button
Press this button and this unit will be restored to the initial state.

10.REMOTE CONTROL RECEIVER

It is able of receiving infrared signals launched by the remote control matching the unit.

8 37
10. CD Program Play 11.AUX IN
In CD mode, you can set the sequence of playing by the program function, the operation External connected audio input.
is as follows:
When CD is playing, press ST/PROG button, then the display shows: 12.MINI USB PORT
Connect the USB memory to this socket,and the unit can play music format files supported
PROG by this unit in the USB memory.
TC TC TC TC
1 _ _ : _ _ 5 _ _ : _ _ 9 _ _ : _ _ 13 _ _ : _ _
2 _ _ : _ _ 6 _ _ : _ _ 10 _ _ : _ _ 14 _ _ : _ _
3 _ _ : _ _ 7 _ _ : _ _ 11 _ _ : _ _ 15 _ _ : _ _
4 _ _ : _ _ 8 _ _ : _ _ 12 _ _ : _ _ 16 _ _ : _ _
PLAY DELETE 13 14 15
BASE
Input the number of the song you want to program by the remote control, program the
first song, input your desired song, for example, the sixth song, and press number button
6 on the remote control. Program the second song, press button move the cursor to
2 . Input your desired song, for example, the ninth song, press number button 9 on
the remote control. Press button to program play.
Back to the normal mode, press the ST/PROG button, then press button.
Note: This function can only be worked by the remote control.

13.Disc Slot

14.Slot indicator light

15.SD Slot

36 9
INSTRUCTIONS INSTRUCTIONS

8.MAIN MENU TOUCH OPERATION 17.CD BASIC OPERATION

Slide in CD/MP3 disc, unit will play it automatically. If disc is in slot, press DVD touch
button on main menu can to play.
OSD SET
1. Repeat Play
DVD USB/SD In CD/MP3 mode, press AMS/RPT button on remote control, to startup following, repeat
CD disc: Single song repeat→ Repeat play off.
RADIO MP3 disc: Single song repeat→Directory repeat→ Repeat play off.
GPS
2. Fast Forward/Fast Rewind
Press SEEK + / SEEK - button on remote control, or / touch button on display to
speed forward or backward playing.
Note: Hold above button a bit longer to operate.

3. Previous/Next Song Play

In playing mode, press SEEK + / SEEK - on remote control, or / touch button on
display to choose previous/next song.

4. Pause Play
In play mode, press button on remote control, or button on display to pause.
Press again to go back to normal play.

5. Stop Play
In play mode:
1) Press button on remote control to enter the pause mode, the position will be stored
in unit. At that time, press button on remote control or touch button on display to
resume playing at the stored position.
2) Press button on remote control twice to enter into stop mode, here, press
button on remote control or touch button on display, unit will play from the first song.
TV CDC
6. OSD
POWER In playing mode, short press OSD on remote control to show all information of present
disc.

7. Randomly Play
BLUETOOTH In CD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.

AUX INPUT 8. EQ Mode

1) This function can only be worked by remote control.
2) When playing CD/MP3, press the “ZOOM” button on the remote control, you can
choose the sound mode.
* This unit without CDC/TV/GPS/BLUETOOTH function. 3) When enter this function, press the button / / / to move the course to select
sound mode which in the system menu, after your selection position will show red color
to indicate the confirmation.

9. OPEN
Press OPEN button on panel to eject disc.

10 35
14. PBC (MENU) Play 9.OSD SETUP
In VCD mode, press this button then play the PBC and display will show whole menu
in disc, work with number button to choose song. When you are playing either song
of the PBC, and you want to stop to select another song, press the button to turn off.
Note:
1) This function can be worked by the control.
2) PBC is suitable for the SVCD and VCD 2.0 disc.
3) In PBC mode, you can not press number button only to choose song.

15. VCD Program Playing

In VCD mode, you can set playing sequence of songs by program play function.
The program playing operation steps are as follows:
In VCD mode, press ST/PTOG button, display will show:
PROG
TC TC TC TC
1 _ _ : _ _ 5 _ _ : _ _ 9 _ _ : _ _ 13 _ _ : _ _
2 _ _ : _ _ 6 _ _ : _ _ 10 _ _ : _ _ 14 _ _ : _ _
3 _ _ : _ _ 7 _ _ : _ _ 11 _ _ : _ _ 15 _ _ : _ _
4 _ _ : _ _ 8 _ _ : _ _ 12 _ _ : _ _ 16 _ _ : _ _
PLAY DELETE

Input the songs which you want to programmed by the number buttons on remote control.
For example: Program the first song, input your desires song, for example, the fourth song,
and press number button 4 on the remote control. Program the second song, press
button move the cursor to 2 . Input your desired song, for example, the eighth song,
press number button 8 on the remote control. Press button to program play. Back to
the normal mode, press the ST/PROG button, then press button.
Note: This function can only be worked by the remote control.

34 11
 8. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.

9. Number Buttons
In VCD mode, press 0-9 number button to input song. For example, you want to choose
13th song, press 10+ button, and then press 3 button once to play 13th song.
Note: This function can only be worked by the remote control.

10. Repeat Play

In playing mode, press AMS/RPT button on remote control, to startup following, repeat
function. Single song repeat→ Repeat play off.
Note:
1) When playing VCD disc, if PBC is on, no repeat function.
2) After unit is power off or mode is switched to other playing mode except VCD mode.
if you switch back to VCD mode, repeat playing will be cancelled.

11. Randomly Play

In VCD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
Note: When VCD disc, if PBC is on, RDM will not work.

12. Switch Track

In VCD mode, press AUDIO button on remote control to switch track as following
sequence: Left Right Stereo

13. OPEN
Press OPEN button on panel to eject disc.

12 33
INSTRUCTIONS INSTRUCTIONS

16.VCD BASIC OPERATION 10.REMOTE CONTROL FUNCTION

Slide in the VCD disc, it will play it automatically. If the disc is in slot, press DVD touch 4. SOURCE Button
button on main menu can to play. Press this button to choose audio sources.
1. Pause Play
5. EQ Button
In playing mode, press button on remote control, or on display to pause.
Press again to back to normal play. Press this button to choose POP,ROCK,CLASS,off.

2. Stop Play 6. SEEK + ( ) / SEEK - ( ) Button

In playing mode, 1) Press button on remote control to enter the pause mode, the Press this button to manual turning, speed
position will be stored in unit. At that time, press button on remote control or touch or quick back, previous song and next song.
button on display to resume playing at the stored position.
2) Press button on remote control twice to enter into stop mode, here, press button 7. VOL + ( ) / VOL - ( )
on remote control or touch button on display, unit will play from the first song. Press this button to increase or decrease
volume level.
3. Fast Forward/Rewind Function
In playing mode, press SEEK + button on remote control, or touch button on display 8. SEL Button
to speed play.
Press this button to choose sound feature.
When you need quick back, press SEEK - button on remote control, or touch button
on display to quick back play.
Note: Hold above button a bit longer to operate. 9. LOUD Button
Press this button to startup LOUD function.
4. Previous/Next Song Play
In playing mode, press SEEK + / SEEK - on remote control, or / touch button on 10. BAND - P/N Button
display to choose previous/next song. In radio mode, press this button to choose band.
In VCD, DVD mode, press this button to choose
5. Switch System AUTO, PAL or NTSC system.
In playing mode, short press the BAND/P/N button on remote control, to select PAL,
AUTO, NTSC TV system.
11. LOC/RDM Button
Note: This function can only be worked by the remote control.
In radio mode, press this button to switch
6. Slow Play between local and direction. In VCD, CD mode,
Press SLOW button on remote control to slow play. The level of slow playing is as follows. press this key to randomly play.
Sequence is : SLOW 1/2 SLOW 1/3 SLOW 1/4 SLOW 1/5
12. STOP Button
PLAY SLOW 1/7 SLOW 1/6
Press this button to stop playing.
Note: This function can only be worked by the remote control.
1. POWER 13. PLAY/PAUSE Button
7. Zoom In / Zoom Out Press once to switch on, press again to Press this button to switch between play and
Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are switch off. pause. In stop mode, press this button to play.
as follows: ZOOM IN 2 ZOOM IN 3 ZOOM IN 4 ZOOM IN 1/2

ZOOM IN OFF ZOOM IN 1/4 ZOOM IN 1/3

2. MUTE Button 14. ST/ PROG Button
Note: Press once to turn off audio output,
1. This function can only be worked by the remote control. In radio mode, press this button to choose
press again to resume volume level.
2. Image which is zoomed in can be moved by up/down/left/right cursor to move. stereo or mono station. In audio mode, it
3. Image which is zoomed out cannot be moved. 3. DSP can help STOP button to programmed play.
Press this button to show the time.

32 13
INSTRUCTIONS INSTRUCTIONS
15. 0 - 10 + Button 24. ANGLE Button
Press this button to choose desired song, In DVD mode, press this button to change
section, preset stations. play angle.
* Decimal numbers, for example the 19th
song, press 1,9 button; 25. SETUP Button
* Centesimal numbers, for example, the In audio mode, press this button to choose
120th song, press 1,2,0 button. different set items.

16. AMS / RPT Button 26. OSD Display

In radio mode, press this button to browse Press this button to display the title chapter
stored stations. In audio mode, press this and the left time.
button to play repeatedly.
27. ZOOM Button
17. TITLE Button In DVD/VCD mode, press this button to
In DVD mode, press this button to play ZOOM in. In CD/MP3/USB/SD mode,
back to the top menu of disc. press this button to choose EQ.

18. AUDIO Button 28. MENU Button

In DVD mode, press this button to switch Press button to back to the main menu.
language of dialogue. In VCD mode, press
this button to choose left track, right track, BATTERY CHANGE
and stereo. When control distance of remote control
becomes shorter or no function, please
19. SET Playing Time change battery. Please confirm polarity
In DVD mode, press this button, you can before change.
define playing time.
One hand press stopper, then pull out battery.
20. SUBTITLE Button
In DVD mode, press this button to switch
language of subtitle.

21. PBC Button

In VCD mode, press this button to display
all song menus, work with number button Put battery into controller.
to choose songs.

22. UP, DOWN, LEFT, RIGHT, ENTER

Button
In DVD mode, press this button to move
cursor up, down, left, right to choose item
in menu. Press the enter button to confirm Insert battery holder into controller.
choice.

23. SLOW Button

In audio mode, press this button to slow
backward and slow forward.

14 31
 18.Click on this button to enter title menu
19.Click on this button to choose language.
20.Click this button and the screen will
display o--10 button.
21.Click to button to Zoon in/Zoon out
the picture.
22.Click to enter the menu of operation
for touching.
23.Back main menu.
30 15
16 29
INSTRUCTIONS INSTRUCTIONS

12.DVD MODE
AUDIO SETTING ON TOUCH SCREEN

LATIN

Audio selection: EQ mode: Touch the button

VOL → BAS → TRE → BAL → FAD to change settings:
ROCK → POP → CLASSIC → OFF

When using this function, the position

bar will be highlighted.

Change the
listening position

Bass choosing: when

touched the button will be
yellow, touch this button
to exit, touch it again to
resume.
Loud choosing: this function is defined
open, when it is touched at the first time,
the loud function will be closed, at the
same time, yellow light disappear.

28 17
INSTRUCTIONS INSTRUCTIONS

VIDEO SETTING ON TOUCH SCREEN

You can choose: Brightness, Contrast, Color,

Hue, adjust the image effect according to
your sight. The blue bar will show your level.

LATIN

LATIN

Video mode: When using this

function, the position will be darker
on the screen.
Image mode: You can choose the area in the
broken line on the panel, standard, defined,
soft, according what you need to choose,
the blue back light will disappear.

LATIN

18 27
INSTRUCTIONS INSTRUCTIONS

13.RDS USER OPERATION

Short press on this button to

Press PTY, when PTY is on, it means there decrease radio frequency;
is strong RDS signals output. longer press on this button to
seek radio channels frequency
decreased direction.
Press this button to choose radio
channels' name, please refer to details
Short press on this button to
user manual.
increase radio frequency;
Press this button to close sound
longer press on this button to
output, re-press this button to seek radio channels frequency
resume sound. increased direction.

Touch this area to

enter & exit main
menu.

Press this button to

adjust angles of the
monitor.

Press this button each time, it

will automatically execute the
Press “SEL” to adjust other following operation in an
functions, please refer to pic 3.
order of FM1 → FM2 → FM3 →
AM1 → AM2

In the radio state, press “APS” button, Press TA, when TA is on, it
it will automatically seek radio means the unit is automatically
channels in the whole band and preset track RDS radio channels.
the strongest radio channels.

For details of RDS operation, please refer to other instruction

26 19
INSTRUCTIONS INSTRUCTIONS
RDS
1. EON (RDS Mark)
Indicate main unit is on auto tracking RDS mode.
2. AF (RDS Auto Tracking Mark)
Indicate radio is auto tracking RDS channel.
3. TA (RDS Signal Increasing Output)
Indicate RDS channel have signal increasing output.
4. TP (RDS Channel Stereo Mark)
Indicate RDS channel is on stereo playing mode.
5. POP.M (RDS Channel Mark)
Indicate RDS channel name.

1. RDS Tracking System

Press AF button in FM mode, and then press / last 2 minutes, RDS will auto search
channel up and down, it will stop searching when RDS channel be founded, but “AF”
will keep remaining on the screen and waits for the next traffic emergency report.
2. RDS Tracking on Playing Mode
In playing mode, “AF” tracking system keeps on opening and waits for traffic emergency
report.

1) PTY: RDS button, press once will show music mode POP, press 1-6 function
memory button, every group have 2 channel.
POP M ROCK M EASY M
LIGHT M CLASSICS M OTHER M
JAZZ COUNTRY NATION
2) Press PTY button twice and then press 1-6 function memory button, every
button have 3 channel.
NEWS AFFAIRS INFORMATION SPORT
EDUCATION DRAMA CULTURE SCIENCE
CHILDREN SOCIETT RELIGION PHONING
TRAVEL

Note: RDS channel in broken line is available.

AF: RDS auto search button, in radio mode also can press this button shortly auto
tracking RDS channel, press this button shortly can cancel RDS function.
TA: In RDS mode, press this button can output TA signal, and check RDS channel is
exist or not, if no RDS signal TFT will show “NO.TA.TP”.

20 25
INSTRUCTIONS INSTRUCTIONS
14. MENU Select 14.RADIO OPERATION
In playing mode, press PBC button on remote control to back to the menu, display will
show chapter and section in disc. Work with / button on remote control or touch 1. Band Selection
button on display to choose your desired song. Press button / ENTER button to play.
Note: This function can only be worked by the remote control. In radio mode, press BAND button, BAND/P/N button on remote control, or touch position
OPEN: Press OPEN button on panel to eject disc. on screen every time to choose band, the sequence is as follows:
FM1 FM2 FM3
15. Program Play AM2 AM1
In DVD mode, you can set the sequence of playing by the program function, the operation 2. Adjust Frequency
is as follow:
PROG Manually Adjust Frequency:
TC TC TC TC Press SEEK + button on remote control, or touch button on display shortly every time,
1 0 1 : 0 3 5 _ _ : _ _ 9 _ _ : _ _ 13 _ _ : _ _
frequency will increase one step by one step till you get desired frequency. Press SEEK -
2 0 1 : 0 6 6 _ _ : _ _ 10 _ _ : _ _ 14 _ _ : _ _
button on remote control, or touch button on display shortly every time, frequency will
3 _ _ : _ _ 7 _ _ : _ _ 11 _ _ : _ _ 15 _ _ : _ _
4 _ _ : _ _ 8 _ _ : _ _ 12 _ _ : _ _ 16 _ _ : _ _ ecrease on step by step till you get desired frequency.
PLAY DELETE Search Station:
When DVD is playing, press ST / PROG button, then display shows: Press SEEK + / SEEK - button on remote control, or / touch button on display
For example, program the first song, input 01, press button move the cursor to the shortly every time to search station in up/down direction. When get one station, it will
second lattice, input desired song, for example, the third song. Program the second song, auto stop searching.
press button, move the cursor to 2 . input 01, press button move the cursor to
the second lattice, input desired song, for example, the 6th song (press 6). Press button
to program play. Back to the normal mode, press the ST/PROG button, then press 3. Browse / Auto Search and Store Station
button. 1) In radio mode, press AMS/RPT button on remote control, or APS button on display
Note: This function can only be worked by the remote control. shortly to browse preset station on 1-6;
2) In radio mode, press AMS/RPT button on remote control, or APS button on display
16. Digital Album longer to auto search in whole band from present frequency and store 6 most strong
Play the disc contains JPEG pictures, read the picture menu first.
1. Press button on remote control, the pictures will be browsed automatically. (It also frequency on 1-6;
can be worked to press number 6 button on the unit.) 3) This unit has FM1, FM2, FM3, AM1, AM2 Bands. Each band can store 6 stations,
2. Press ENTER button on the remote control, it can be manual browsed by SEEK + and so a total 30 preset stations.
SEEK -. Note: After preset station, unit will cancel the former preset stations.
3. ZOOM in picture function: During auto browsing, press pause button stop the screen,
press ZOOM button to zoom in or zoom out the picture. During manual browsing, you
can press ZOOM button to zoom in or zoom out picture directly. 4. Mono/Stereo Selection
4.Under zoom in picture, you can move the picture by . In radio mode, press ST/PTOG button on remote control or ST touch position on display
Note: You can not move picture in normal mode and zoom out mode. to choose mono/stereo program.
Note: In radio mode, start up the stereo function automatic, touch the ST button again on
17. Setup the display, the TFT display will show the ST OFF & MOMO mark, that is to turn off the
Press SETUP button, display will show the system setup menu and the submenu, select
the item you want by , after selecting the proper item, press / / / to press stereo. When the right under foot appear the MONO mark, it show the MONO on.
ENTER to confirm.
Note: 5. Manual Preset and Store Station
1. It just can be worked by the remote control. In radio mode, press 1-6 button on remote control, or 1-6 position on display longer to
2. Some function setting maybe different because of the different model or disc. store preset frequency into preset channel. For example, the present frequency is
3. If the selected language is not recorded in the disc, then unit will show the appointed
language, 89.8MHz, press 2 button longer, then 89.8MHz frequency is stored in 2 channel.
4. About the “SETUP”, please read the follow.
Press “SETUP” on the remote control, it will appear the following touch menu:

24 21
INSTRUCTIONS INSTRUCTIONS

15.DVD BASIC OPERATION 8. OSD

In playing mode, short press OSD on remote control to show all information of present
Slide in DVD disc, unit will play it automatically. If disc is in slot, press DVD touch button disc.
on main menu to play disc.
9. Repeatedly Play
1. Pause Play In play mode, press AMS/RPT button on remote control to start up follow repeat function.
In playing mode, press button on remote control, or on the display to pause. Repeat (chapter) Repeat (section) Repeat (off)
Press again to go back to normal play.

2. Stop Play 10. Angle Switch

In playing mode, 1) Press button on remote control to enter the pause mode, the If the DVD disc is recorded with multi-angles, you can press the ANGLE button to switch
position will be stored in unit. At that time, press button on remote control or touch the angle during playing.
button on display to resume playing at the stored position. The sequence is as follow:
2) Press button on remote control twice to enter into stop mode, here, press ANGLE 1 → ANGLE 2 → ANGLE 3
button on remote control or touch button on display, unit will play from the first song. Note:
1. It just can be worked by the remote control.
3. Fast Forward/Fast Backward Play 2. It is only for the DVD disc which has multi-angle.
In playing mode, press SEEK + button on remote control, or touch button on display 3. If there is a sign on the cover of the DVD disc. The number in the sign means
to speed play. how many angles the disc has.
When you need quick back, press SEEK - button on remote control, or touch button 4. You can not switch the angle when slow playing.
on display to quick back play.
Note: Hold above button a bit longer to operate. 11.Multi-Audio
There are different languages of dialogue and audio systems in DVD disc.
4. Previous/Next Song Play If the DVD disc is recorded with multi-audio, you can switch the language of dialogue and
In playing mode, press SEEK + / SEEK - on remote control, or / touch button on the audio systems when playing.
display to choose previous/next song. Press the AUDIO button repeatedly to change the language of dialogue.
Note
5. Switch System 1. It just can be worked by the remote control.
In playing mode, short press the BAND/P/N button on remote control, to select PAL, 2. It is only for the DVD disc which has multi-language.
AUTO, NTSC TV system. 3. If there is a sign on the cover of the DVD disc, means that it was recorded
Note: This function can only be worked by the remote control. by multi-language/audio system.
4. In VCD mode, press the AUDIO button to select the L/R or STEREO track.
6. Slow Play
Press SLOW button on remote control to slow play. The level of slow playing is as follows. 12.Multi-Subtitle
Sequence is : SLOW 1/2 SLOW 1/3 SLOW 1/4 SLOW 1/5
If the DVD disc is recorded with multi-subtitle, you can switch the languages of subtitle.
Press the sub-t button repeatedly to change the language.
PLAY SLOW 1/7 SLOW 1/6 Note:
Note: This function can only be worked by the remote control. 1. It just can be worked by the remote control.
2. It only for the DVD disc which is recorded with multi-wubtitle.
7. Zoom In/Zoom Out 3. If there is a sign on the cover of the DVD disc means theat it has several
Press ZOOM button on remote control to zoom in / zoom out the picture. The levels are subtitle.
as follows: ZOOM IN 2 ZOOM IN 3 ZOOM IN 4 ZOOM IN 1/2
13. Title Select
Note: ZOOM IN OFF ZOOM IN 1/4 ZOOM IN 1/3 In DVD mode, press TITLE button to back to the title menu. Display shows all the titles of
1. This function can only be worked by the remote control. the disc. You can select the chapter you want by the cursor, press play button to play the
2. Image which is zoomed in can be moved by up/down/left/right cursor to move. chapter.
3. Image which is zoomed out cannot be moved. Note: It just can be worked by the remote control.

22 23