Scribd
Upload
18 views

CF1900SS-DF Example Spec - Rev1

The CF1900SS-DF is a structured stainless steel packing for applications with extreme temperatures or flammability concerns. It is made of precision-welded 5 mil stainless steel sheets with double-folded edges for crush resistance. The cross-fluted design provides efficient thermal performance through lateral liquid redistribution and a 60 degree flute angle. It is available in standard sizes and configurations to provide equivalent performance to plastic packings in demanding conditions.

Uploaded by

parsiti unnes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
18 views

CF1900SS-DF Example Spec - Rev1

The CF1900SS-DF is a structured stainless steel packing for applications with extreme temperatures or flammability concerns. It is made of precision-welded 5 mil stainless steel sheets with double-folded edges for crush resistance. The cross-fluted design provides efficient thermal performance through lateral liquid redistribution and a 60 degree flute angle. It is available in standard sizes and configurations to provide equivalent performance to plastic packings in demanding conditions.

Uploaded by

parsiti unnes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CF1900SS-DF Stainless Steel

High Efficiency Film Fill

Brentwood Industries’ CF1900SS-DF is a non- combustible and


corrosion resistant structured packing (fill) for demanding
applications. CF1900SS-DF is a high performance, cross-
fluted, structured packing made for special applications where
extreme temperatures or flammability concerns restrict the use
of plastic materials. Using Brentwood’s precision molding and
assembly technology, the individual sheets are permanently
bonded together by use of resistance welds, precisely located
to provide an extremely strong and durable pack.

The sheets are formed from 5 mil (0.13mm) stainless steel


material with the edges double folded for extra crush resistance
and installer safety. The industry standard, 19mm cross-fluted
design, provides highly efficient thermal performance due to the
60° included angle of the flutes with its inherent ability to
redistribute liquid laterally. CF1900SS-DF is offered in standard
304L stainless steel material, although other stainless steel
alloys are also available. Although CF1900SS-DF has a much
lower pressure drop as well as lower thermal performance than
CF1900, both characteristics balance each other out and
CF1900SS-DF performs just as well as PVC CF1900.

The CF1900SS-DF is offered in standard 12” (305mm) depths


and 12” (305mm) widths. Pack lengths are available from 24”
(610mm) to 72” (1830mm) in 2” (50.8mm) increments.

Please contact a Brentwood Sales Representative for pricing,


lead-times or alternative metals for your project. See Brentwood
drawings for pack dimensional details and tolerances.

Example Specification
The structured packing (fill) shall be Brentwood’s CF1900SS-DF. The modules shall be made from 5 mil (0.13mm) stainless steel, type
304L* sheets with double-folded sheet edges. The top and bottom edges shall form a uniform honeycomb pattern and be fully edge-
bonded using precisely located resistance welds. There shall be a minimum of 228 welds per ft3 (8050 per m3) of pack.

The sheet pitch shall be 19mm and provide 45ft2/ft3 (148m2/m3) of surface area. Each sheet shall have microstructure stamped into the
sheets for enhanced mass/heat transfer.

The modules shall provide a minimum crush resistance of 2500 PSF (120 kPa). The packing supports shall be spaced and sized per the
manufacturer’s recommendations. Direct supports shall provide a minimum of 1.5” (38mm) of bearing surface. The installation shall be
in accordance with Brentwood’s recommendations & guidelines.

(*or other available SS alloys)

GLOBAL HEADQUARTERS Phone: +1.610.374.5109 Email: [email protected]


EUROPE Phone: +420.311.516.096 Email: [email protected]
THAILAND Phone: +662.694.1060.2 Email: [email protected]
INDIA Phone: +91.265.2333995 Email: [email protected]
brentwoodindustries.com

CF1900SS-DF Example Spec_rev1.pdf September 25, 2017

You might also like